diff options
Diffstat (limited to 'vendor/github.com/aws/aws-sdk-go/aws/session/doc.go')
-rw-r--r-- | vendor/github.com/aws/aws-sdk-go/aws/session/doc.go | 208 |
1 files changed, 90 insertions, 118 deletions
diff --git a/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go b/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go index ea7b886f81..7ec66e7e58 100644 --- a/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go +++ b/vendor/github.com/aws/aws-sdk-go/aws/session/doc.go @@ -1,97 +1,93 @@ /* -Package session provides configuration for the SDK's service clients. - -Sessions can be shared across all service clients that share the same base -configuration. The Session is built from the SDK's default configuration and -request handlers. - -Sessions should be cached when possible, because creating a new Session will -load all configuration values from the environment, and config files each time -the Session is created. Sharing the Session value across all of your service -clients will ensure the configuration is loaded the fewest number of times possible. - -Concurrency +Package session provides configuration for the SDK's service clients. Sessions +can be shared across service clients that share the same base configuration. Sessions are safe to use concurrently as long as the Session is not being -modified. The SDK will not modify the Session once the Session has been created. -Creating service clients concurrently from a shared Session is safe. - -Sessions from Shared Config - -Sessions can be created using the method above that will only load the -additional config if the AWS_SDK_LOAD_CONFIG environment variable is set. -Alternatively you can explicitly create a Session with shared config enabled. -To do this you can use NewSessionWithOptions to configure how the Session will -be created. Using the NewSessionWithOptions with SharedConfigState set to -SharedConfigEnable will create the session as if the AWS_SDK_LOAD_CONFIG -environment variable was set. +modified. Sessions should be cached when possible, because creating a new +Session will load all configuration values from the environment, and config +files each time the Session is created. Sharing the Session value across all of +your service clients will ensure the configuration is loaded the fewest number +of times possible. -Creating Sessions - -When creating Sessions optional aws.Config values can be passed in that will -override the default, or loaded config values the Session is being created -with. This allows you to provide additional, or case based, configuration -as needed. +Sessions options from Shared Config By default NewSession will only load credentials from the shared credentials file (~/.aws/credentials). If the AWS_SDK_LOAD_CONFIG environment variable is set to a truthy value the Session will be created from the configuration values from the shared config (~/.aws/config) and shared credentials -(~/.aws/credentials) files. See the section Sessions from Shared Config for -more information. +(~/.aws/credentials) files. Using the NewSessionWithOptions with +SharedConfigState set to SharedConfigEnable will create the session as if the +AWS_SDK_LOAD_CONFIG environment variable was set. -Create a Session with the default config and request handlers. With credentials -region, and profile loaded from the environment and shared config automatically. -Requires the AWS_PROFILE to be set, or "default" is used. +Credential and config loading order - // Create Session - sess := session.Must(session.NewSession()) +The Session will attempt to load configuration and credentials from the +environment, configuration files, and other credential sources. The order +configuration is loaded in is: - // Create a Session with a custom region - sess := session.Must(session.NewSession(&aws.Config{ - Region: aws.String("us-east-1"), - })) + * Environment Variables + * Shared Credentials file + * Shared Configuration file (if SharedConfig is enabled) + * EC2 Instance Metadata (credentials only) - // Create a S3 client instance from a session - sess := session.Must(session.NewSession()) +The Environment variables for credentials will have precedence over shared +config even if SharedConfig is enabled. To override this behavior, and use +shared config credentials instead specify the session.Options.Profile, (e.g. +when using credential_source=Environment to assume a role). + + sess, err := session.NewSessionWithOptions(session.Options{ + Profile: "myProfile", + }) - svc := s3.New(sess) +Creating Sessions -Create Session With Option Overrides +Creating a Session without additional options will load credentials region, and +profile loaded from the environment and shared config automatically. See, +"Environment Variables" section for information on environment variables used +by Session. -In addition to NewSession, Sessions can be created using NewSessionWithOptions. -This func allows you to control and override how the Session will be created -through code instead of being driven by environment variables only. + // Create Session + sess, err := session.NewSession() -Use NewSessionWithOptions when you want to provide the config profile, or -override the shared config state (AWS_SDK_LOAD_CONFIG). + +When creating Sessions optional aws.Config values can be passed in that will +override the default, or loaded, config values the Session is being created +with. This allows you to provide additional, or case based, configuration +as needed. + + // Create a Session with a custom region + sess, err := session.NewSession(&aws.Config{ + Region: aws.String("us-west-2"), + }) + +Use NewSessionWithOptions to provide additional configuration driving how the +Session's configuration will be loaded. Such as, specifying shared config +profile, or override the shared config state, (AWS_SDK_LOAD_CONFIG). // Equivalent to session.NewSession() - sess := session.Must(session.NewSessionWithOptions(session.Options{ + sess, err := session.NewSessionWithOptions(session.Options{ // Options - })) + }) - // Specify profile to load for the session's config - sess := session.Must(session.NewSessionWithOptions(session.Options{ - Profile: "profile_name", - })) + sess, err := session.NewSessionWithOptions(session.Options{ + // Specify profile to load for the session's config + Profile: "profile_name", - // Specify profile for config and region for requests - sess := session.Must(session.NewSessionWithOptions(session.Options{ - Config: aws.Config{Region: aws.String("us-east-1")}, - Profile: "profile_name", - })) + // Provide SDK Config options, such as Region. + Config: aws.Config{ + Region: aws.String("us-west-2"), + }, - // Force enable Shared Config support - sess := session.Must(session.NewSessionWithOptions(session.Options{ + // Force enable Shared Config support SharedConfigState: session.SharedConfigEnable, - })) + }) Adding Handlers -You can add handlers to a session for processing HTTP requests. All service -clients that use the session inherit the handlers. For example, the following -handler logs every request and its payload made by a service client: +You can add handlers to a session to decorate API operation, (e.g. adding HTTP +headers). All clients that use the Session receive a copy of the Session's +handlers. For example, the following request handler added to the Session logs +every requests made. // Create a session, and add additional handlers for all service // clients created with the Session to inherit. Adds logging handler. @@ -99,22 +95,15 @@ handler logs every request and its payload made by a service client: sess.Handlers.Send.PushFront(func(r *request.Request) { // Log every request made and its payload - logger.Println("Request: %s/%s, Payload: %s", + logger.Printf("Request: %s/%s, Params: %s", r.ClientInfo.ServiceName, r.Operation, r.Params) }) -Deprecated "New" function - -The New session function has been deprecated because it does not provide good -way to return errors that occur when loading the configuration files and values. -Because of this, NewSession was created so errors can be retrieved when -creating a session fails. - Shared Config Fields -By default the SDK will only load the shared credentials file's (~/.aws/credentials) -credentials values, and all other config is provided by the environment variables, -SDK defaults, and user provided aws.Config values. +By default the SDK will only load the shared credentials file's +(~/.aws/credentials) credentials values, and all other config is provided by +the environment variables, SDK defaults, and user provided aws.Config values. If the AWS_SDK_LOAD_CONFIG environment variable is set, or SharedConfigEnable option is used to create the Session the full shared config values will be @@ -125,24 +114,31 @@ files have the same format. If both config files are present the configuration from both files will be read. The Session will be created from configuration values from the shared -credentials file (~/.aws/credentials) over those in the shared config file (~/.aws/config). +credentials file (~/.aws/credentials) over those in the shared config file +(~/.aws/config). -Credentials are the values the SDK should use for authenticating requests with -AWS Services. They arfrom a configuration file will need to include both -aws_access_key_id and aws_secret_access_key must be provided together in the -same file to be considered valid. The values will be ignored if not a complete -group. aws_session_token is an optional field that can be provided if both of -the other two fields are also provided. +Credentials are the values the SDK uses to authenticating requests with AWS +Services. When specified in a file, both aws_access_key_id and +aws_secret_access_key must be provided together in the same file to be +considered valid. They will be ignored if both are not present. +aws_session_token is an optional field that can be provided in addition to the +other two fields. aws_access_key_id = AKID aws_secret_access_key = SECRET aws_session_token = TOKEN -Assume Role values allow you to configure the SDK to assume an IAM role using -a set of credentials provided in a config file via the source_profile field. -Both "role_arn" and "source_profile" are required. The SDK supports assuming -a role with MFA token if the session option AssumeRoleTokenProvider -is set. + ; region only supported if SharedConfigEnabled. + region = us-east-1 + +Assume Role configuration + +The role_arn field allows you to configure the SDK to assume an IAM role using +a set of credentials from another source. Such as when paired with static +credentials, "profile_source", "credential_process", or "credential_source" +fields. If "role_arn" is provided, a source of credentials must also be +specified, such as "source_profile", "credential_source", or +"credential_process". role_arn = arn:aws:iam::<account_number>:role/<role_name> source_profile = profile_with_creds @@ -150,40 +146,16 @@ is set. mfa_serial = <serial or mfa arn> role_session_name = session_name -Region is the region the SDK should use for looking up AWS service endpoints -and signing requests. - - region = us-east-1 - -Assume Role with MFA token -To create a session with support for assuming an IAM role with MFA set the -session option AssumeRoleTokenProvider to a function that will prompt for the -MFA token code when the SDK assumes the role and refreshes the role's credentials. -This allows you to configure the SDK via the shared config to assumea role -with MFA tokens. - -In order for the SDK to assume a role with MFA the SharedConfigState -session option must be set to SharedConfigEnable, or AWS_SDK_LOAD_CONFIG -environment variable set. - -The shared configuration instructs the SDK to assume an IAM role with MFA -when the mfa_serial configuration field is set in the shared config -(~/.aws/config) or shared credentials (~/.aws/credentials) file. - -If mfa_serial is set in the configuration, the SDK will assume the role, and -the AssumeRoleTokenProvider session option is not set an an error will -be returned when creating the session. +The SDK supports assuming a role with MFA token. If "mfa_serial" is set, you +must also set the Session Option.AssumeRoleTokenProvider. The Session will fail +to load if the AssumeRoleTokenProvider is not specified. sess := session.Must(session.NewSessionWithOptions(session.Options{ AssumeRoleTokenProvider: stscreds.StdinTokenProvider, })) - // Create service client value configured for credentials - // from assumed role. - svc := s3.New(sess) - -To setup assume role outside of a session see the stscrds.AssumeRoleProvider +To setup Assume Role outside of a session see the stscreds.AssumeRoleProvider documentation. Environment Variables |