path: root/contrib/man/md/docker-run.1.md

% DOCKER(1) Docker User Manuals
% William Henry
% APRIL 2014
# NAME
docker-run - Run a process in an isolated container

# SYNOPSIS
**docker run**
[**-a**|**--attach**[=]] [**-c**|**--cpu-shares**[=0]
[**-m**|**--memory**=*memory-limit*]
[**--cidfile**=*file*] [**-d**|**--detach**[=*false*]] [**--dns**=*IP-address*]
[**--name**=*name*] [**-u**|**--user**=*username*|*uid*]
[**--link**=*name*:*alias*]
[**-e**|**--env**=*environment*] [**--entrypoint**=*command*]
[**--expose**=*port*] [**-P**|**--publish-all**[=*false*]]
[**-p**|**--publish**=*port-mappping*] [**-h**|**--hostname**=*hostname*]
[**--rm**[=*false*]] [**--privileged**[=*false*]]
[**-i**|**--interactive**[=*false*]]
[**-t**|**--tty**[=*false*]] [**--lxc-conf**=*options*]
[**-n**|**--networking**[=*true*]]
[**-v**|**--volume**=*volume*] [**--volumes-from**=*container-id*]
[**-w**|**--workdir**=*directory*] [**--sig-proxy**[=*true*]]
IMAGE [COMMAND] [ARG...]

# DESCRIPTION

Run a process in a new container. **docker run** starts a process with its own
file system, its own networking, and its own isolated process tree. The IMAGE
which starts the process may define defaults related to the process that will be
run in the container, the networking to expose, and more, but **docker run**
gives final control to the operator or administrator who starts the container
from the image. For that reason **docker run** has more options than any other
Docker command.

If the IMAGE is not already loaded then **docker run** will pull the IMAGE, and
all image dependencies, from the repository in the same way running **docker
pull** IMAGE, before it starts the container from that image.

# OPTIONS

**-a**, **--attach**=*stdin*|*stdout*|*stderr*
   Attach to stdin, stdout or stderr. In foreground mode (the default when
**-d** is not specified), **docker run** can start the process in the container
and attach the console to the process’s standard input, output, and standard
error. It can even pretend to be a TTY (this is what most commandline
executables expect) and pass along signals. The **-a** option can be set for
each of stdin, stdout, and stderr.

**-c**, **--cpu-shares**=0
   CPU shares in relative weight. You can increase the priority of a container
with the -c option. By default, all containers run at the same priority and get
the same proportion of CPU cycles, but you can tell the kernel to give more
shares of CPU time to one or more containers when you start them via **docker
run**.

**--cidfile**=*file*
   Write the container ID to the file specified.


**-d**, **-detach**=*true*|*false*
   Detached mode. This runs the container in the background. It outputs the new
container's ID and any error messages. At any time you can run **docker ps** in
the other shell to view a list of the running containers. You can reattach to a
detached container with **docker attach**. If you choose to run a container in
the detached mode, then you cannot use the **-rm** option.

   When attached in the tty mode, you can detach from a running container without
stopping the process by pressing the keys CTRL-P CTRL-Q.


**--dns**=*IP-address*
   Set custom DNS servers. This option can be used to override the DNS
configuration passed to the container. Typically this is necessary when the
host DNS configuration is invalid for the container (eg. 127.0.0.1). When this
is the case the **-dns** flags is necessary for every run.


**-e**, **-env**=*environment*
   Set environment variables. This option allows you to specify arbitrary
environment variables that are available for the process that will be launched
inside of the container.


**--entrypoint**=*command*
   This option allows you to overwrite the default entrypoint of the image that
is set in the Dockerfile. The ENTRYPOINT of an image is similar to a COMMAND
because it specifies what executable to run when the container starts, but it is
(purposely) more difficult to override. The ENTRYPOINT gives a container its
default nature or behavior, so that when you set an ENTRYPOINT you can run the
container as if it were that binary, complete with default options, and you can
pass in more options via the COMMAND. But, sometimes an operator may want to run
something else inside the container, so you can override the default ENTRYPOINT
at runtime by using a **--entrypoint** and a string to specify the new
ENTRYPOINT.

**--expose**=*port*
   Expose a port from the container without publishing it to your host. A
containers port can be exposed to other containers in three ways: 1) The
developer can expose the port using the EXPOSE parameter of the Dockerfile, 2)
the operator can use the **--expose** option with **docker run**, or 3) the
container can be started with the **--link**.

**-m**, **-memory**=*memory-limit*
   Allows you to constrain the memory available to a container. If the host
supports swap memory, then the -m memory setting can be larger than physical
RAM. If a limit of 0 is specified, the container's memory is not limited. The 
memory limit format: <number><optional unit>, where unit = b, k, m or g.

**-P**, **-publish-all**=*true*|*false*
   When set to true publish all exposed ports to the host interfaces. The
default is false. If the operator uses -P (or -p) then Docker will make the
exposed port accessible on the host and the ports will be available to any
client that can reach the host. To find the map between the host ports and the
exposed ports, use **docker port**.


**-p**, **-publish**=[]
   Publish a container's port to the host (format: ip:hostPort:containerPort |
ip::containerPort | hostPort:containerPort) (use **docker port** to see the
actual mapping)


**-h**, **-hostname**=*hostname*
   Sets the container host name that is available inside the container.


**-i**, **-interactive**=*true*|*false*
   When set to true, keep stdin open even if not attached. The default is false.


**--link**=*name*:*alias*
   Add link to another container. The format is name:alias. If the operator
uses **--link** when starting the new client container, then the client
container can access the exposed port via a private networking interface. Docker
will set some environment variables in the client container to help indicate
which interface and port to use.


**-n**, **-networking**=*true*|*false*
   By default, all containers have networking enabled (true) and can make
outgoing connections. The operator can disable networking with **--networking**
to false. This disables all incoming and outgoing networking. In cases like this
, I/O can only be performed through files or by using STDIN/STDOUT.

Also by default, the container will use the same DNS servers as the host. The
operator may override this with **-dns**.


**--name**=*name*
   Assign a name to the container. The operator can identify a container in
three ways:

    UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
    UUID short identifier (“f78375b1c487”)
    Name (“jonah”)

The UUID identifiers come from the Docker daemon, and if a name is not assigned
to the container with **--name** then the daemon will also generate a random
string name. The name is useful when defining links (see **--link**) (or any
other place you need to identify a container). This works for both background
and foreground Docker containers.


**--privileged**=*true*|*false*
   Give extended privileges to this container. By default, Docker containers are
“unprivileged” (=false) and cannot, for example, run a Docker daemon inside the
Docker container. This is because by default a container is not allowed to
access any devices. A “privileged” container is given access to all devices.

When the operator executes **docker run --privileged**, Docker will enable access
to all devices on the host as well as set some configuration in AppArmor to
allow the container nearly all the same access to the host as processes running
outside of a container on the host.


**--rm**=*true*|*false*
   If set to *true* the container is automatically removed when it exits. The
default is *false*. This option is incompatible with **-d**.


**--sig-proxy**=*true*|*false*
   When set to true, proxify all received signals to the process (even in
non-tty mode). The default is true.


**-t**, **-tty**=*true*|*false*
   When set to true Docker can allocate a pseudo-tty and attach to the standard
input of any container. This can be used, for example, to run a throwaway
interactive shell. The default is value is false.


**-u**, **-user**=*username*,*uid*
   Set a username or UID for the container.


**-v**, **-volume**=*volume*[:ro|:rw]
   Bind mount a volume to the container. 

The **-v** option can be used one or
more times to add one or more mounts to a container. These mounts can then be
used in other containers using the **--volumes-from** option. 

The volume may be optionally suffixed with :ro or :rw to mount the volumes in
read-only or read-write mode, respectively. By default, the volumes are mounted
read-write. See examples.

**--volumes-from**=*container-id*[:ro|:rw]
   Will mount volumes from the specified container identified by container-id.
Once a volume is mounted in a one container it can be shared with other
containers using the **--volumes-from** option when running those other
containers. The volumes can be shared even if the original container with the
mount is not running. 

The container ID may be optionally suffixed with :ro or 
:rw to mount the volumes in read-only or read-write mode, respectively. By 
default, the volumes are mounted in the same mode (read write or read only) as 
the reference container.


**-w**, **-workdir**=*directory*
   Working directory inside the container. The default working directory for
running binaries within a container is the root directory (/). The developer can
set a different default with the Dockerfile WORKDIR instruction. The operator
can override the working directory by using the **-w** option.


**IMAGE**
   The image name or ID.


**COMMAND**
   The command or program to run inside the image.


**ARG**
   The arguments for the command to be run in the container.

# EXAMPLES

## Exposing log messages from the container to the host's log

If you want messages that are logged in your container to show up in the host's
syslog/journal then you should bind mount the /dev/log directory as follows.

    # docker run -v /dev/log:/dev/log -i -t fedora /bin/bash

From inside the container you can test this by sending a message to the log.

    (bash)# logger "Hello from my container"

Then exit and check the journal.

    # exit

    # journalctl -b | grep Hello

This should list the message sent to logger.

## Attaching to one or more from STDIN, STDOUT, STDERR

If you do not specify -a then Docker will attach everything (stdin,stdout,stderr)
. You can specify to which of the three standard streams (stdin, stdout, stderr)
you’d like to connect instead, as in:

    # docker run -a stdin -a stdout -i -t fedora /bin/bash

## Linking Containers

The link feature allows multiple containers to communicate with each other. For
example, a container whose Dockerfile has exposed port 80 can be run and named
as follows:

    # docker run --name=link-test -d -i -t fedora/httpd

A second container, in this case called linker, can communicate with the httpd
container, named link-test, by running with the **--link=<name>:<alias>**

    # docker run -t -i --link=link-test:lt --name=linker fedora /bin/bash

Now the container linker is linked to container link-test with the alias lt.
Running the **env** command in the linker container shows environment variables
 with the LT (alias) context (**LT_**)

    # env
    HOSTNAME=668231cb0978
    TERM=xterm
    LT_PORT_80_TCP=tcp://172.17.0.3:80
    LT_PORT_80_TCP_PORT=80
    LT_PORT_80_TCP_PROTO=tcp
    LT_PORT=tcp://172.17.0.3:80
    PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    PWD=/
    LT_NAME=/linker/lt
    SHLVL=1
    HOME=/
    LT_PORT_80_TCP_ADDR=172.17.0.3
    _=/usr/bin/env

When linking two containers Docker will use the exposed ports of the container
to create a secure tunnel for the parent to access.


## Mapping Ports for External Usage

The exposed port of an application can be mapped to a host port using the **-p**
flag. For example a httpd port 80 can be mapped to the host port 8080 using the
following:

    # docker run -p 8080:80 -d -i -t fedora/httpd

## Creating and Mounting a Data Volume Container

Many applications require the sharing of persistent data across several
containers. Docker allows you to create a Data Volume Container that other
containers can mount from. For example, create a named container that contains
directories /var/volume1 and /tmp/volume2. The image will need to contain these
directories so a couple of RUN mkdir instructions might be required for you
fedora-data image:

    # docker run --name=data -v /var/volume1 -v /tmp/volume2 -i -t fedora-data true
    # docker run --volumes-from=data --name=fedora-container1 -i -t fedora bash

Multiple --volumes-from parameters will bring together multiple data volumes from
multiple containers. And it's possible to mount the volumes that came from the
DATA container in yet another container via the fedora-container1 intermidiery
container, allowing to abstract the actual data source from users of that data:

    # docker run --volumes-from=fedora-container1 --name=fedora-container2 -i -t fedora bash

## Mounting External Volumes

To mount a host directory as a container volume, specify the absolute path to
the directory and the absolute path for the container directory separated by a
colon:

    # docker run -v /var/db:/data1 -i -t fedora bash

When using SELinux, be aware that the host has no knowledge of container SELinux
policy. Therefore, in the above example, if SELinux policy is enforced, the
`/var/db` directory is not writable to the container. A "Permission Denied"
message will occur and an avc: message in the host's syslog.


To work around this, at time of writing this man page, the following command
needs to be run in order for the proper SELinux policy type label to be attached
to the host directory:

    # chcon -Rt svirt_sandbox_file_t /var/db


Now, writing to the /data1 volume in the container will be allowed and the
changes will also be reflected on the host in /var/db.

# HISTORY
April 2014, Originally compiled by William Henry (whenry at redhat dot com)
based on docker.io source material and internal work.