/**
 * @page eio_examples Eio Examples
 *
 * Here is a page with some Eio examples explained:
 *
 * @li @ref eio_file_ls.c
 *
 * Tutorials:
 * @li @ref tutorial_dir_copy
 * @li @ref tutorial_dir_stat_ls
 * @li @ref tutorial_file_ls
 * @li @ref tutorial_dir_direct_ls
 * @li @ref tutorial_monitor_add
 *
 * @example eio_file_ls.c
 */

/**
 * @page tutorial_dir_copy eio_dir_copy() tutorial
 *
 * To use eio_dir_copy(), you basically need the source and
 * destination files (or directories), and set three callbacks:
 *
 * @li The notification callback, which allows you to know if a file or
 * a directory is copied, and the progress of the copy.
 * @li The end callback, which is called when the copy is finished.
 * @li The error callback, which is called if an error occurred. You
 * can then retrieve the error type as an errno error.
 *
 * @warning It is the user's duty to provide the "right target". It
 * means that copying to '.' will copy the content directly inside '.'
 * and not in a subdirectory.
 *
 * Here is a simple example:
 *
 * @code
 * #include <Ecore.h>
 * #include <Eio.h>
 *
 * static void
 * _test_notify_cb(void *data, Eio_File *handler, const Eio_Progress *info)
 * {
 *    switch (info->op)
 *       {
 *       case EIO_FILE_COPY:
 *          printf("[%s] %f%%\n", info->dest, info->percent);
 *          break;
 *       case EIO_DIR_COPY:
 *          printf("global [%li/%li] %f%%\n", info->current, info->max, info->percent);
 *          break;
 *       }
 * }
 *
 * static void
 * _test_done_cb(void *data, Eio_File *handler)
 * {
 *    printf("copy done\n");
 *    ecore_main_loop_quit();
 * }
 *
 * static void
 * _test_error_cb(int error, Eio_File *handler, void *data)
 * {
 *    fprintf(stderr, "error: [%s]\n", strerror(error));
 *     ecore_main_loop_quit();
 * }
 *
 * int
 * main(int argc, char **argv)
 * {
 *    Eio_File *cp;
 *
 *    if (argc != 3)
 *      {
 *         fprintf(stderr, "eio_cp source_file destination_file\n");
 *         return -1;
 *      }
 *
 *    ecore_init();
 *    eio_init();
 *
 *    cp = eio_dir_copy(argv[1], argv[2],
 *                      _test_notify_cb,
 *                      _test_done_cb,
 *                      _test_error_cb,
 *                      NULL);
 *
 *    ecore_main_loop_begin();
 *
 *    eio_shutdown();
 *    ecore_shutdown();
 *
 *    return 0;
 * }
 * @endcode
 */

/**
 * @page tutorial_dir_stat_ls eio_dir_stat_ls() tutorial
 *
 * @li The filter callback, which allow or not a file to be seen
 * by the main loop handler. This callback run in a separated thread.
 * @li The main callback, which receive in the main loop all the file
 * that are allowed by the filter. If you are updating a user interface
 * it make sense to delay the insertion a little, so you get a chance
 * to update the canvas for a bunch of file instead of one by one.
 * @li The end callback, which is called in the main loop when the
 * content of the directory has been correctly scanned and all the
 * file notified to the main loop.
 * @li The error callback, which is called if an error occurred or
 * if the listing was cancelled during it's run. You can then retrieve
 * the error type as an errno error.
 *
 * Here is a simple example that implement a stupidly simple replacement for find:
 *
 * @code
 * #include <Ecore.h>
 * #include <Eio.h>
 *
 * static Eina_Bool
 * _test_filter_cb(void *data, Eio_File *handler, const Eina_File_Direct_Info *info)
 * {
 *    fprintf(stderr, "ACCEPTING: %s\n", info->path);
 *    return EINA_TRUE;
 * }
 *
 * static void
 * _test_main_cb(void *data, Eio_File *handler, const Eina_File_Direct_Info *info)
 * {
 *    fprintf(stderr, "PROCESS: %s\n", info->path);
 * }
 *
 * static void
 * _test_done_cb(void *data, Eio_File *handler)
 * {
 *    printf("ls done\n");
 *    ecore_main_loop_quit();
 * }
 *
 * static void
 * _test_error_cb(void *data, Eio_File *handler, int error)
 * {
 *    fprintf(stderr, "error: [%s]\n", strerror(error));
 *    ecore_main_loop_quit();
 * }
 *
 * int
 * main(int argc, char **argv)
 * {
 *    Eio_File *cp;
 *
 *    if (argc != 2)
 *      {
 * 	fprintf(stderr, "eio_ls directory\n");
 * 	return -1;
 *      }
 *
 *    ecore_init();
 *    eio_init();
 *
 *    cp = eio_dir_stat_ls(argv[1],
 *                         _test_filter_cb,
 *                         _test_main_cb,
 *                         _test_done_cb,
 *                         _test_error_cb,
 *                         NULL);
 *
 *    ecore_main_loop_begin();
 *
 *    eio_shutdown();
 *    ecore_shutdown();
 *
 *    return 0;
 * }
 *
 * @endcode
 */

/**
 * @page tutorial_file_ls eio_file_ls() tutorial
 *
 * To use eio_file_ls(), you just need to define four callbacks:
 *
 * @li The filter callback, which allows a file to be seen (or not)
 * by the main loop handler. This callback runs in a separate thread.
 * @li The main callback, which receive in the main loop all the file
 * that are allowed by the filter. If you are updating a user interface
 * it makes sense to delay the insertion a little, so you get a chance
 * to update the canvas for a bunch of files instead of one by one.
 * @li The end callback, which is called in the main loop when the
 * content of the directory has been correctly scanned and all the
 * file notified to the main loop.
 * @li The error callback, which is called if an error occurred or
 * if the listing was cancelled during its run. You can then retrieve
 * the error type as an errno error.
 *
 * Here is a simple example:
 *
 * @code
 * #include <Ecore.h>
 * #include <Eio.h>
 *
 * static Eina_Bool
 * _test_filter_cb(void *data, Eio_File *handler, const char *file)
 * {
 *    fprintf(stderr, "ACCEPTING: %s\n", file);
 *    return EINA_TRUE;
 * }
 *
 * static void
 * _test_main_cb(void *data, Eio_File *handler, const char *file)
 * {
 *    fprintf(stderr, "PROCESS: %s\n", file);
 * }
 *
 * static void
 * _test_done_cb(void *data, Eio_File *handler)
 * {
 *    printf("ls done\n");
 *    ecore_main_loop_quit();
 * }
 *
 * static void
 * _test_error_cb(void *data, Eio_File *handler, int error)
 * {
 *    fprintf(stderr, "error: [%s]\n", strerror(error));
 *    ecore_main_loop_quit();
 * }
 *
 * int
 * main(int argc, char **argv)
 * {
 *    Eio_File *cp;
 *
 *    if (argc != 2)
 *      {
 * 	fprintf(stderr, "eio_ls directory\n");
 * 	return -1;
 *      }
 *
 *    ecore_init();
 *    eio_init();
 *
 *    cp = eio_file_ls(argv[1],
 *                     _test_filter_cb,
 *                     _test_main_cb,
 *                     _test_done_cb,
 *                     _test_error_cb,
 *                     NULL);
 *
 *    ecore_main_loop_begin();
 *
 *    eio_shutdown();
 *    ecore_shutdown();
 *
 *    return 0;
 * }
 *
 * @endcode
 */

/**
 * @page tutorial_monitor_add eio_monitor_add() tutorial
 *
 * To use eio_monitor_add(), you have to define callbacks
 * for events declared by eio.
 * Available events are :
 * - EIO_MONITOR_FILE_CREATED
 * - EIO_MONITOR_FILE_DELETED
 * - EIO_MONITOR_FILE_MODIFIED
 * - EIO_MONITOR_FILE_CLOSED
 * - EIO_MONITOR_DIRECTORY_CREATED
 * - EIO_MONITOR_DIRECTORY_DELETED
 * - EIO_MONITOR_DIRECTORY_CLOSED
 * - EIO_MONITOR_SELF_RENAME
 * - EIO_MONITOR_SELF_DELETED
 *
 * As nothing is worth an example, here it is :
 * @code
 * #include <Eina.h>
 * #include <Ecore.h>
 * #include <Eio.h>
 *
 * void file_modified(void *data, int type, void *event)
 * {
 *    const char *filename = (const char *)data;
 *    printf("file %s ", filename);
 *    if( type == EIO_MONITOR_FILE_MODIFIED )
 *       printf("is being modified");
 *    else if( type == EIO_MONITOR_FILE_CLOSED )
 *       printf("is no longer being modified");
 *    else printf("got unexpected changes");
 *    printf("\n");
 * }
 *
 * int main(int argc, char **argv) {
 *    Eio_Monitor *monitor  = NULL,
 *                *monitor2 = NULL;
 *    eio_init();
 *    const char *filename = eina_stringshare_add("/tmp/eio_notify_testfile");
 *
 *    monitor  = eio_monitor_add(filename);
 *    ecore_event_handler_add(EIO_MONITOR_FILE_MODIFIED, (Ecore_Event_Handler_Cb)file_modified, filename);
 *    ecore_event_handler_add(EIO_MONITOR_FILE_CLOSED, (Ecore_Event_Handler_Cb)file_modified, filename);
 *
 *    ecore_main_loop_begin();
 *    eio_shutdown();
 *    eina_stringshare_del(filename);
 * }
 * @endcode
 * Build the example doing :
 * @verbatim gcc -o tutorial_monitor_add tutorial_monitor_add.c `pkg-config --libs --cflags eio ecore ecore-file eina`
 * then create the file /tmp/eio_notify_testfile :
 * touch /tmp/eio_notify_testfile
 * and launch tutorial_monitor_add, and in another terminal, write into /tmp/eio_notify_testfile, doing for example :
 * echo "test" >> /tmp/eio_notify_testfile
 * @endverbatim
 */

/**
 * @page tutorial_dir_direct_ls eio_dir_direct_ls() tutorial
 *
 * @li The filter callback, which allow or not a file to be seen
 * by the main loop handler. This callback run in a separated thread.
 * It also take care of getting a stat buffer needed by the main callback
 * to display the file size.
 * @li The main callback, which receive in the main loop all the file
 * that are allowed by the filter. If you are updating a user interface
 * it make sense to delay the insertion a little, so you get a chance
 * to update the canvas for a bunch of file instead of one by one.
 * @li The end callback, which is called in the main loop when the
 * content of the directory has been correctly scanned and all the
 * file notified to the main loop.
 * @li The error callback, which is called if an error occurred or
 * if the listing was cancelled during it's run. You can then retrieve
 * the error type as an errno error.
 *
 * Here is a simple example that implement a stupidly simple recursive ls that display file size:
 *
 * @code
 * #include <Eina.h>
 * #include <Ecore.h>
 * #include <Eio.h>
 *
 * static Eina_Bool
 * _test_filter_cb(void *data, Eio_File *handler, Eina_File_Direct_Info *info)
 * {
 *    Eina_Stat *buffer;
 *    Eina_Bool isdir;
 *
 *    isdir = info->type == EINA_FILE_DIR;
 *
 *    buffer = malloc(sizeof (Eina_Stat));
 *    if (eina_file_statat(eio_file_container_get(handler), info, buffer))
 *      {
 *         free(buffer);
 *         return EINA_FALSE;
 *      }
 *
 *    if (!isdir && info->type == EINA_FILE_DIR)
 *      {
 *         struct stat st;
 *         if (lstat(info->path, &st) == 0)
 *           {
 *              if (S_ISLNK(st.st_mode))
 *                info->type = EINA_FILE_LNK;
 *           }
 *      }
 *
 *    eio_file_associate_direct_add(handler, "stat", buffer, free);
 *    fprintf(stdout, "ACCEPTING: %s\n", info->path);
 *    return EINA_TRUE;
 * }
 *
 * static void
 * _test_main_cb(void *data, Eio_File *handler, const Eina_File_Direct_Info *info)
 * {
 *    struct stat *buffer;
 *
 *    buffer = eio_file_associate_find(handler, "stat");
 *    fprintf(stdout, "PROCESS: %s of size %li\n", info->path, buffer->st_size);
 * }
 *
 * static void
 * _test_done_cb(void *data, Eio_File *handler)
 * {
 *    printf("ls done\n");
 *    ecore_main_loop_quit();
 * }
 *
 * static void
 * _test_error_cb(void *data, Eio_File *handler, int error)
 * {
 *    fprintf(stdout, "error: [%s]\n", strerror(error));
 *    ecore_main_loop_quit();
 * }
 *
 * int
 * main(int argc, char **argv)
 * {
 *    Eio_File *cp;
 *
 *    if (argc != 2)
 *      {
 * 	fprintf(stdout, "eio_ls directory\n");
 * 	return -1;
 *      }
 *
 *    ecore_init();
 *    eio_init();
 *
 *    cp = eio_dir_direct_ls(argv[1],
 * 			  _test_filter_cb,
 * 			  _test_main_cb,
 * 			  _test_done_cb,
 * 			  _test_error_cb,
 * 			  NULL);
 *
 *    ecore_main_loop_begin();
 *
 *    eio_shutdown();
 *    ecore_shutdown();
 *
 *    return 0;
 * }
 * @endcode
 */