diff options
Diffstat (limited to 'doc/ffserver.conf')
| -rw-r--r-- | doc/ffserver.conf | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/doc/ffserver.conf b/doc/ffserver.conf new file mode 100644 index 0000000000..094c093af2 --- /dev/null +++ b/doc/ffserver.conf @@ -0,0 +1,371 @@ +# Port on which the server is listening. You must select a different +# port from your standard HTTP web server if it is running on the same +# computer. +Port 8090 + +# Address on which the server is bound. Only useful if you have +# several network interfaces. +BindAddress 0.0.0.0 + +# Number of simultaneous HTTP connections that can be handled. It has +# to be defined *before* the MaxClients parameter, since it defines the +# MaxClients maximum limit. +MaxHTTPConnections 2000 + +# Number of simultaneous requests that can be handled. Since FFServer +# is very fast, it is more likely that you will want to leave this high +# and use MaxBandwidth, below. +MaxClients 1000 + +# This the maximum amount of kbit/sec that you are prepared to +# consume when streaming to clients. +MaxBandwidth 1000 + +# Access log file (uses standard Apache log file format) +# '-' is the standard output. +CustomLog - + +################################################################## +# Definition of the live feeds. Each live feed contains one video +# and/or audio sequence coming from an ffmpeg encoder or another +# ffserver. This sequence may be encoded simultaneously with several +# codecs at several resolutions. + +<Feed feed1.ffm> + +# You must use 'ffmpeg' to send a live feed to ffserver. In this +# example, you can type: +# +# ffmpeg http://localhost:8090/feed1.ffm + +# ffserver can also do time shifting. It means that it can stream any +# previously recorded live stream. The request should contain: +# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify +# a path where the feed is stored on disk. You also specify the +# maximum size of the feed, where zero means unlimited. Default: +# File=/tmp/feed_name.ffm FileMaxSize=5M +File /tmp/feed1.ffm +FileMaxSize 200K + +# You could specify +# ReadOnlyFile /saved/specialvideo.ffm +# This marks the file as readonly and it will not be deleted or updated. + +# Specify launch in order to start ffmpeg automatically. +# First ffmpeg must be defined with an appropriate path if needed, +# after that options can follow, but avoid adding the http:// field +#Launch ffmpeg + +# Only allow connections from localhost to the feed. +ACL allow 127.0.0.1 + +</Feed> + + +################################################################## +# Now you can define each stream which will be generated from the +# original audio and video stream. Each format has a filename (here +# 'test1.mpg'). FFServer will send this stream when answering a +# request containing this filename. + +<Stream test1.mpg> + +# coming from live feed 'feed1' +Feed feed1.ffm + +# Format of the stream : you can choose among: +# mpeg : MPEG-1 multiplexed video and audio +# mpegvideo : only MPEG-1 video +# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec) +# ogg : Ogg format (Vorbis audio codec) +# rm : RealNetworks-compatible stream. Multiplexed audio and video. +# ra : RealNetworks-compatible stream. Audio only. +# mpjpeg : Multipart JPEG (works with Netscape without any plugin) +# jpeg : Generate a single JPEG image. +# asf : ASF compatible streaming (Windows Media Player format). +# swf : Macromedia Flash compatible stream +# avi : AVI format (MPEG-4 video, MPEG audio sound) +Format mpeg + +# Bitrate for the audio stream. Codecs usually support only a few +# different bitrates. +AudioBitRate 32 + +# Number of audio channels: 1 = mono, 2 = stereo +AudioChannels 1 + +# Sampling frequency for audio. When using low bitrates, you should +# lower this frequency to 22050 or 11025. The supported frequencies +# depend on the selected audio codec. +AudioSampleRate 44100 + +# Bitrate for the video stream +VideoBitRate 64 + +# Ratecontrol buffer size +VideoBufferSize 40 + +# Number of frames per second +VideoFrameRate 3 + +# Size of the video frame: WxH (default: 160x128) +# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga, +# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga, +# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720, +# hd1080 +VideoSize 160x128 + +# Transmit only intra frames (useful for low bitrates, but kills frame rate). +#VideoIntraOnly + +# If non-intra only, an intra frame is transmitted every VideoGopSize +# frames. Video synchronization can only begin at an intra frame. +VideoGopSize 12 + +# More MPEG-4 parameters +# VideoHighQuality +# Video4MotionVector + +# Choose your codecs: +#AudioCodec mp2 +#VideoCodec mpeg1video + +# Suppress audio +#NoAudio + +# Suppress video +#NoVideo + +#VideoQMin 3 +#VideoQMax 31 + +# Set this to the number of seconds backwards in time to start. Note that +# most players will buffer 5-10 seconds of video, and also you need to allow +# for a keyframe to appear in the data stream. +#Preroll 15 + +# ACL: + +# You can allow ranges of addresses (or single addresses) +#ACL ALLOW <first address> <last address> + +# You can deny ranges of addresses (or single addresses) +#ACL DENY <first address> <last address> + +# You can repeat the ACL allow/deny as often as you like. It is on a per +# stream basis. The first match defines the action. If there are no matches, +# then the default is the inverse of the last ACL statement. +# +# Thus 'ACL allow localhost' only allows access from localhost. +# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and +# allow everybody else. + +</Stream> + + +################################################################## +# Example streams + + +# Multipart JPEG + +#<Stream test.mjpg> +#Feed feed1.ffm +#Format mpjpeg +#VideoFrameRate 2 +#VideoIntraOnly +#NoAudio +#Strict -1 +#</Stream> + + +# Single JPEG + +#<Stream test.jpg> +#Feed feed1.ffm +#Format jpeg +#VideoFrameRate 2 +#VideoIntraOnly +##VideoSize 352x240 +#NoAudio +#Strict -1 +#</Stream> + + +# Flash + +#<Stream test.swf> +#Feed feed1.ffm +#Format swf +#VideoFrameRate 2 +#VideoIntraOnly +#NoAudio +#</Stream> + + +# ASF compatible + +<Stream test.asf> +Feed feed1.ffm +Format asf +VideoFrameRate 15 +VideoSize 352x240 +VideoBitRate 256 +VideoBufferSize 40 +VideoGopSize 30 +AudioBitRate 64 +StartSendOnKey +</Stream> + + +# MP3 audio + +#<Stream test.mp3> +#Feed feed1.ffm +#Format mp2 +#AudioCodec mp3 +#AudioBitRate 64 +#AudioChannels 1 +#AudioSampleRate 44100 +#NoVideo +#</Stream> + + +# Ogg Vorbis audio + +#<Stream test.ogg> +#Feed feed1.ffm +#Metadata title "Stream title" +#AudioBitRate 64 +#AudioChannels 2 +#AudioSampleRate 44100 +#NoVideo +#</Stream> + + +# Real with audio only at 32 kbits + +#<Stream test.ra> +#Feed feed1.ffm +#Format rm +#AudioBitRate 32 +#NoVideo +#NoAudio +#</Stream> + + +# Real with audio and video at 64 kbits + +#<Stream test.rm> +#Feed feed1.ffm +#Format rm +#AudioBitRate 32 +#VideoBitRate 128 +#VideoFrameRate 25 +#VideoGopSize 25 +#NoAudio +#</Stream> + + +################################################################## +# A stream coming from a file: you only need to set the input +# filename and optionally a new format. Supported conversions: +# AVI -> ASF + +#<Stream file.rm> +#File "/usr/local/httpd/htdocs/tlive.rm" +#NoAudio +#</Stream> + +#<Stream file.asf> +#File "/usr/local/httpd/htdocs/test.asf" +#NoAudio +#Metadata author "Me" +#Metadata copyright "Super MegaCorp" +#Metadata title "Test stream from disk" +#Metadata comment "Test comment" +#</Stream> + + +################################################################## +# RTSP examples +# +# You can access this stream with the RTSP URL: +# rtsp://localhost:5454/test1-rtsp.mpg +# +# A non-standard RTSP redirector is also created. Its URL is: +# http://localhost:8090/test1-rtsp.rtsp + +#<Stream test1-rtsp.mpg> +#Format rtp +#File "/usr/local/httpd/htdocs/test1.mpg" +#</Stream> + + +# Transcode an incoming live feed to another live feed, +# using libx264 and video presets + +#<Stream live.h264> +#Format rtp +#Feed feed1.ffm +#VideoCodec libx264 +#VideoFrameRate 24 +#VideoBitRate 100 +#VideoSize 480x272 +#AVPresetVideo default +#AVPresetVideo baseline +#AVOptionVideo flags +global_header +# +#AudioCodec libfaac +#AudioBitRate 32 +#AudioChannels 2 +#AudioSampleRate 22050 +#AVOptionAudio flags +global_header +#</Stream> + +################################################################## +# SDP/multicast examples +# +# If you want to send your stream in multicast, you must set the +# multicast address with MulticastAddress. The port and the TTL can +# also be set. +# +# An SDP file is automatically generated by ffserver by adding the +# 'sdp' extension to the stream name (here +# http://localhost:8090/test1-sdp.sdp). You should usually give this +# file to your player to play the stream. +# +# The 'NoLoop' option can be used to avoid looping when the stream is +# terminated. + +#<Stream test1-sdp.mpg> +#Format rtp +#File "/usr/local/httpd/htdocs/test1.mpg" +#MulticastAddress 224.124.0.1 +#MulticastPort 5000 +#MulticastTTL 16 +#NoLoop +#</Stream> + + +################################################################## +# Special streams + +# Server status + +<Stream stat.html> +Format status + +# Only allow local people to get the status +ACL allow localhost +ACL allow 192.168.0.0 192.168.255.255 + +#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico +</Stream> + + +# Redirect index.html to the appropriate site + +<Redirect index.html> +URL http://www.ffmpeg.org/ +</Redirect> |