From fa4ead1d6692cd4d698b651d1b5882fc9fb64fcb Mon Sep 17 00:00:00 2001 From: Stefano Sabatini Date: Sun, 18 Nov 2012 13:00:11 +0100 Subject: doc: move codec options and descriptions to a dedicated manual page --- doc/libavcodec.texi | 1092 +-------------------------------------------------- 1 file changed, 1 insertion(+), 1091 deletions(-) (limited to 'doc/libavcodec.texi') diff --git a/doc/libavcodec.texi b/doc/libavcodec.texi index d8925b479c..9c7f02e921 100644 --- a/doc/libavcodec.texi +++ b/doc/libavcodec.texi @@ -20,1103 +20,13 @@ The shared architecture provides various services ranging from bit stream I/O to DSP optimizations, and makes it suitable for implementing robust and fast codecs as well as for experimentation. -@c man end DESCRIPTION - -@chapter Codec Options -@c man begin CODEC OPTIONS - -libavcodec provides some generic global options, which can be set on -all the encoders and decoders. In addition each codec may support -so-called private options, which are specific for a given codec. - -Sometimes, a global option may only affect a specific kind of codec, -and may be unsensical or ignored by another, so you need to be aware -of the meaning of the specified options. Also some options are -meant only for decoding or encoding. - -Options may be set by specifying -@var{option} @var{value} in the -FFmpeg tools, or by setting the value explicitly in the -@code{AVCodecContext} options or using the @file{libavutil/opt.h} API -for programmatic use. - -The list of supported options follow: - -@table @option -@item b @var{integer} (@emph{encoding,audio,video}) -Set bitrate in bits/s. Default value is 200K. - -@item ab @var{integer} (@emph{encoding,audio}) -Set audio bitrate (in bits/s). Default value is 128K. - -@item bt @var{integer} (@emph{encoding,video}) -Set video bitrate tolerance (in bits/s). In 1-pass mode, bitrate -tolerance specifies how far ratecontrol is willing to deviate from the -target average bitrate value. This is not related to min/max -bitrate. Lowering tolerance too much has an adverse effect on quality. - -@item flags @var{flags} (@emph{decoding/encoding,audio,video,subtitles}) -Set generic flags. - -Possible values: -@table @samp -@item mv4 -Use four motion vector by macroblock (mpeg4). -@item qpel -Use 1/4 pel motion compensation. -@item loop -Use loop filter. -@item qscale -Use fixed qscale. -@item gmc -Use gmc. -@item mv0 -Always try a mb with mv=<0,0>. -@item input_preserved - -@item pass1 -Use internal 2pass ratecontrol in first pass mode. -@item pass2 -Use internal 2pass ratecontrol in second pass mode. -@item gray -Only decode/encode grayscale. -@item emu_edge -Do not draw edges. -@item psnr -Set error[?] variables during encoding. -@item truncated - -@item naq -Normalize adaptive quantization. -@item ildct -Use interlaced DCT. -@item low_delay -Force low delay. -@item global_header -Place global headers in extradata instead of every keyframe. -@item bitexact -Use only bitexact stuff (except (I)DCT). -@item aic -Apply H263 advanced intra coding / mpeg4 ac prediction. -@item cbp -Deprecated, use mpegvideo private options instead. -@item qprd -Deprecated, use mpegvideo private options instead. -@item ilme -Apply interlaced motion estimation. -@item cgop -Use closed gop. -@end table - -@item sub_id @var{integer} -Deprecated, currently unused. - -@item me_method @var{integer} (@emph{encoding,video}) -Set motion estimation method. - -Possible values: -@table @samp -@item zero -zero motion estimation (fastest) -@item full -full motion estimation (slowest) -@item epzs -EPZS motion estimation (default) -@item esa -esa motion estimation (alias for full) -@item tesa -tesa motion estimation -@item dia -dia motion estimation (alias for epzs) -@item log -log motion estimation -@item phods -phods motion estimation -@item x1 -X1 motion estimation -@item hex -hex motion estimation -@item umh -umh motion estimation -@item iter -iter motion estimation -@end table - -@item extradata_size @var{integer} -Set extradata size. - -@item time_base @var{rational number} -Set codec time base. - -It is the fundamental unit of time (in seconds) in terms of which -frame timestamps are represented. For fixed-fps content, timebase -should be 1/framerate and timestamp increments should be identically -1. - -@item g @var{integer} (@emph{encoding,video}) -Set the group of picture size. Default value is 12. - -@item ar @var{integer} (@emph{decoding/encoding,audio}) -Set audio sampling rate (in Hz). - -@item ac @var{integer} (@emph{decoding/encoding,audio}) -Set number of audio channels. - -@item cutoff @var{integer} (@emph{encoding,audio}) -Set cutoff bandwidth. - -@item frame_size @var{integer} (@emph{encoding,audio}) -Set audio frame size. - -Each submitted frame except the last must contain exactly frame_size -samples per channel. May be 0 when the codec has -CODEC_CAP_VARIABLE_FRAME_SIZE set, in that case the frame size is not -restricted. It is set by some decoders to indicate constant frame -size. - -@item frame_number @var{integer} -Set the frame number. - -@item delay @var{integer} - -@item qcomp @var{float} (@emph{encoding,video}) -Set video quantizer scale compression (VBR). It is used as a constant -in the ratecontrol equation. Recommended range for default rc_eq: -0.0-1.0. - -@item qblur @var{float} (@emph{encoding,video}) -Set video quantizer scale blur (VBR). - -@item qmin @var{integer} (@emph{encoding,video}) -Set min video quantizer scale (VBR). Must be included between -1 and -69, default value is 2. - -@item qmax @var{integer} (@emph{encoding,video}) -Set max video quantizer scale (VBR). Must be included between -1 and -1024, default value is 31. - -@item qdiff @var{integer} (@emph{encoding,video}) -Set max difference between the quantizer scale (VBR). - -@item bf @var{integer} (@emph{encoding,video}) -Set max number of B frames. - -@item b_qfactor @var{float} (@emph{encoding,video}) -Set qp factor between P and B frames. - -@item rc_strategy @var{integer} (@emph{encoding,video}) -Set ratecontrol method. - -@item b_strategy @var{integer} (@emph{encoding,video}) -Set strategy to choose between I/P/B-frames. - -@item ps @var{integer} (@emph{encoding,video}) -Set RTP payload size in bytes. - -@item mv_bits @var{integer} -@item header_bits @var{integer} -@item i_tex_bits @var{integer} -@item p_tex_bits @var{integer} -@item i_count @var{integer} -@item p_count @var{integer} -@item skip_count @var{integer} -@item misc_bits @var{integer} -@item frame_bits @var{integer} -@item codec_tag @var{integer} -@item bug @var{flags} (@emph{decoding,video}) -Workaround not auto detected encoder bugs. - -Possible values: -@table @samp -@item autodetect - -@item old_msmpeg4 -some old lavc generated msmpeg4v3 files (no autodetection) -@item xvid_ilace -Xvid interlacing bug (autodetected if fourcc==XVIX) -@item ump4 -(autodetected if fourcc==UMP4) -@item no_padding -padding bug (autodetected) -@item amv - -@item ac_vlc -illegal vlc bug (autodetected per fourcc) -@item qpel_chroma - -@item std_qpel -old standard qpel (autodetected per fourcc/version) -@item qpel_chroma2 - -@item direct_blocksize -direct-qpel-blocksize bug (autodetected per fourcc/version) -@item edge -edge padding bug (autodetected per fourcc/version) -@item hpel_chroma - -@item dc_clip - -@item ms -Workaround various bugs in microsoft broken decoders. -@item trunc -trancated frames -@end table - -@item lelim @var{integer} (@emph{encoding,video}) -Set single coefficient elimination threshold for luminance (negative -values also consider DC coefficient). - -@item celim @var{integer} (@emph{encoding,video}) -Set single coefficient elimination threshold for chrominance (negative -values also consider dc coefficient) - -@item strict @var{integer} (@emph{decoding/encoding,audio,video}) -Specify how strictly to follow the standards. - -Possible values: -@table @samp -@item very -strictly conform to a older more strict version of the spec or reference software -@item strict -strictly conform to all the things in the spec no matter what consequences -@item normal - -@item unofficial -allow unofficial extensions -@item experimental -allow non standardized experimental things -@end table - -@item b_qoffset @var{float} (@emph{encoding,video}) -Set QP offset between P and B frames. - -@item err_detect @var{flags} (@emph{decoding,audio,video}) -Set error detection flags. - -Possible values: -@table @samp -@item crccheck -verify embedded CRCs -@item bitstream -detect bitstream specification deviations -@item buffer -detect improper bitstream length -@item explode -abort decoding on minor error detection -@item careful -consider things that violate the spec and have not been seen in the wild as errors -@item compliant -consider all spec non compliancies as errors -@item aggressive -consider things that a sane encoder should not do as an error -@end table - -@item has_b_frames @var{integer} - -@item block_align @var{integer} - -@item mpeg_quant @var{integer} (@emph{encoding,video}) -Use MPEG quantizers instead of H.263. - -@item qsquish @var{float} (@emph{encoding,video}) -How to keep quantizer between qmin and qmax (0 = clip, 1 = use -differentiable function). - -@item rc_qmod_amp @var{float} (@emph{encoding,video}) -Set experimental quantizer modulation. - -@item rc_qmod_freq @var{integer} (@emph{encoding,video}) -Set experimental quantizer modulation. - -@item rc_override_count @var{integer} - -@item rc_eq @var{string} (@emph{encoding,video}) -Set rate control equation. When computing the expression, besides the -standard functions defined in the section 'Expression Evaluation', the -following functions are available: bits2qp(bits), qp2bits(qp). Also -the following constants are available: iTex pTex tex mv fCode iCount -mcVar var isI isP isB avgQP qComp avgIITex avgPITex avgPPTex avgBPTex -avgTex. - -@item maxrate @var{integer} (@emph{encoding,audio,video}) -Set max bitrate tolerance (in bits/s). Requires bufsize to be set. - -@item minrate @var{integer} (@emph{encoding,audio,video}) -Set min bitrate tolerance (in bits/s). Most useful in setting up a CBR -encode. It is of little use elsewise. - -@item bufsize @var{integer} (@emph{encoding,audio,video}) -Set ratecontrol buffer size (in bits). - -@item rc_buf_aggressivity @var{float} (@emph{encoding,video}) -Currently useless. - -@item i_qfactor @var{float} (@emph{encoding,video}) -Set QP factor between P and I frames. - -@item i_qoffset @var{float} (@emph{encoding,video}) -Set QP offset between P and I frames. - -@item rc_init_cplx @var{float} (@emph{encoding,video}) -Set initial complexity for 1-pass encoding. - -@item dct @var{integer} (@emph{encoding,video}) -Set DCT algorithm. - -Possible values: -@table @samp -@item auto -autoselect a good one (default) -@item fastint -fast integer -@item int -accurate integer -@item mmx - -@item altivec - -@item faan -floating point AAN DCT -@end table - -@item lumi_mask @var{float} (@emph{encoding,video}) -Compress bright areas stronger than medium ones. - -@item tcplx_mask @var{float} (@emph{encoding,video}) -Set temporal complexity masking. - -@item scplx_mask @var{float} (@emph{encoding,video}) -Set spatial complexity masking. - -@item p_mask @var{float} (@emph{encoding,video}) -Set inter masking. - -@item dark_mask @var{float} (@emph{encoding,video}) -Compress dark areas stronger than medium ones. - -@item idct @var{integer} (@emph{decoding/encoding,video}) -Select IDCT implementation. - -Possible values: -@table @samp -@item auto - -@item int - -@item simple - -@item simplemmx - -@item libmpeg2mmx - -@item mmi - -@item arm - -@item altivec - -@item sh4 - -@item simplearm - -@item simplearmv5te - -@item simplearmv6 - -@item simpleneon - -@item simplealpha - -@item h264 - -@item vp3 - -@item ipp - -@item xvidmmx - -@item faani -floating point AAN IDCT -@end table - -@item slice_count @var{integer} - -@item ec @var{flags} (@emph{decoding,video}) -Set error concealment strategy. - -Possible values: -@table @samp -@item guess_mvs -iterative motion vector (MV) search (slow) -@item deblock -use strong deblock filter for damaged MBs -@end table - -@item bits_per_coded_sample @var{integer} - -@item pred @var{integer} (@emph{encoding,video}) -Set prediction method. - -Possible values: -@table @samp -@item left - -@item plane - -@item median - -@end table - -@item aspect @var{rational number} (@emph{encoding,video}) -Set sample aspect ratio. - -@item debug @var{flags} (@emph{decoding/encoding,audio,video,subtitles}) -Print specific debug info. - -Possible values: -@table @samp -@item pict -picture info -@item rc -rate control -@item bitstream - -@item mb_type -macroblock (MB) type -@item qp -per-block quantization parameter (QP) -@item mv -motion vector -@item dct_coeff - -@item skip - -@item startcode - -@item pts - -@item er -error recognition -@item mmco -memory management control operations (H.264) -@item bugs - -@item vis_qp -visualize quantization parameter (QP), lower QP are tinted greener -@item vis_mb_type -visualize block types -@item buffers -picture buffer allocations -@item thread_ops -threading operations -@end table - -@item vismv @var{integer} (@emph{decoding,video}) -Visualize motion vectors (MVs). - -Possible values: -@table @samp -@item pf -forward predicted MVs of P-frames -@item bf -forward predicted MVs of B-frames -@item bb -backward predicted MVs of B-frames -@end table - -@item cmp @var{integer} (@emph{encoding,video}) -Set full pel me compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item subcmp @var{integer} (@emph{encoding,video}) -Set sub pel me compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item mbcmp @var{integer} (@emph{encoding,video}) -Set macroblock compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item ildctcmp @var{integer} (@emph{encoding,video}) -Set interlaced dct compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item dia_size @var{integer} (@emph{encoding,video}) -Set diamond type & size for motion estimation. - -@item last_pred @var{integer} (@emph{encoding,video}) -Set amount of motion predictors from the previous frame. - -@item preme @var{integer} (@emph{encoding,video}) -Set pre motion estimation. - -@item precmp @var{integer} (@emph{encoding,video}) -Set pre motion estimation compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item pre_dia_size @var{integer} (@emph{encoding,video}) -Set diamond type & size for motion estimation pre-pass. - -@item subq @var{integer} (@emph{encoding,video}) -Set sub pel motion estimation quality. - -@item dtg_active_format @var{integer} - -@item me_range @var{integer} (@emph{encoding,video}) -Set limit motion vectors range (1023 for DivX player). - -@item ibias @var{integer} (@emph{encoding,video}) -Set intra quant bias. - -@item pbias @var{integer} (@emph{encoding,video}) -Set inter quant bias. - -@item color_table_id @var{integer} - -@item global_quality @var{integer} (@emph{encoding,audio,video}) - -@item coder @var{integer} (@emph{encoding,video}) - -Possible values: -@table @samp -@item vlc -variable length coder / huffman coder -@item ac -arithmetic coder -@item raw -raw (no encoding) -@item rle -run-length coder -@item deflate -deflate-based coder -@end table - -@item context @var{integer} (@emph{encoding,video}) -Set context model. - -@item slice_flags @var{integer} - -@item xvmc_acceleration @var{integer} - -@item mbd @var{integer} (@emph{encoding,video}) -Set macroblock decision algorithm (high quality mode). - -Possible values: -@table @samp -@item simple -use mbcmp (default) -@item bits -use fewest bits -@item rd -use best rate distortion -@end table - -@item stream_codec_tag @var{integer} - -@item sc_threshold @var{integer} (@emph{encoding,video}) -Set scene change threshold. - -@item lmin @var{integer} (@emph{encoding,video}) -Set min lagrange factor (VBR). - -@item lmax @var{integer} (@emph{encoding,video}) -Set max lagrange factor (VBR). - -@item nr @var{integer} (@emph{encoding,video}) -Set noise reduction. - -@item rc_init_occupancy @var{integer} (@emph{encoding,video}) -Set number of bits which should be loaded into the rc buffer before -decoding starts. - -@item inter_threshold @var{integer} (@emph{encoding,video}) - -@item flags2 @var{flags} (@emph{decoding/encoding,audio,video}) - -Possible values: -@table @samp -@item fast -allow non spec compliant speedup tricks -@item sgop -Deprecated, use mpegvideo private options instead -@item noout -skip bitstream encoding -@item local_header -place global headers at every keyframe instead of in extradata -@item chunks -Frame data might be split into multiple chunks -@item showall -Show all frames before the first keyframe -@item skiprd -Deprecated, use mpegvideo private options instead -@end table - -@item error @var{integer} (@emph{encoding,video}) - -@item qns @var{integer} (@emph{encoding,video}) -Deprecated, use mpegvideo private options instead. - -@item threads @var{integer} (@emph{decoding/encoding,video}) - -Possible values: -@table @samp -@item auto -detect a good number of threads -@end table - -@item me_threshold @var{integer} (@emph{encoding,video}) -Set motion estimaton threshold. - -@item mb_threshold @var{integer} (@emph{encoding,video}) -Set macroblock threshold. - -@item dc @var{integer} (@emph{encoding,video}) -Set intra_dc_precision. - -@item nssew @var{integer} (@emph{encoding,video}) -Set nsse weight. - -@item skip_top @var{integer} (@emph{decoding,video}) -Set number of macroblock rows at the top which are skipped. - -@item skip_bottom @var{integer} (@emph{decoding,video}) -Set number of macroblock rows at the bottom which are skipped. - -@item profile @var{integer} (@emph{encoding,audio,video}) - -Possible values: -@table @samp -@item unknown - -@item aac_main - -@item aac_low - -@item aac_ssr - -@item aac_ltp - -@item aac_he - -@item aac_he_v2 - -@item aac_ld - -@item aac_eld - -@item dts - -@item dts_es - -@item dts_96_24 - -@item dts_hd_hra - -@item dts_hd_ma - -@end table - -@item level @var{integer} (@emph{encoding,audio,video}) - -Possible values: -@table @samp -@item unknown - -@end table - -@item lowres @var{integer} (@emph{decoding,audio,video}) -Decode at 1= 1/2, 2=1/4, 3=1/8 resolutions. - -@item skip_threshold @var{integer} (@emph{encoding,video}) -Set frame skip threshold. - -@item skip_factor @var{integer} (@emph{encoding,video}) -Set frame skip factor. - -@item skip_exp @var{integer} (@emph{encoding,video}) -Set frame skip exponent. - -@item skipcmp @var{integer} (@emph{encoding,video}) -Set frame skip compare function. - -Possible values: -@table @samp -@item sad -sum of absolute differences, fast (default) -@item sse -sum of squared errors -@item satd -sum of absolute Hadamard transformed differences -@item dct -sum of absolute DCT transformed differences -@item psnr -sum of squared quantization errors (avoid, low quality) -@item bit -number of bits needed for the block -@item rd -rate distortion optimal, slow -@item zero -0 -@item vsad -sum of absolute vertical differences -@item vsse -sum of squared vertical differences -@item nsse -noise preserving sum of squared differences -@item w53 -5/3 wavelet, only used in snow -@item w97 -9/7 wavelet, only used in snow -@item dctmax - -@item chroma - -@end table - -@item border_mask @var{float} (@emph{encoding,video}) -Increase the quantizer for macroblocks close to borders. - -@item mblmin @var{integer} (@emph{encoding,video}) -Set min macroblock lagrange factor (VBR). - -@item mblmax @var{integer} (@emph{encoding,video}) -Set max macroblock lagrange factor (VBR). - -@item mepc @var{integer} (@emph{encoding,video}) -Set motion estimation bitrate penalty compensation (1.0 = 256). - -@item skip_loop_filter @var{integer} (@emph{decoding,video}) - -Possible values: -@table @samp -@item none - -@item default - -@item noref - -@item bidir - -@item nokey - -@item all - -@end table - -@item skip_idct @var{integer} (@emph{decoding,video}) - -Possible values: -@table @samp -@item none - -@item default - -@item noref - -@item bidir - -@item nokey - -@item all - -@end table - -@item skip_frame @var{integer} (@emph{decoding,video}) - -Possible values: -@table @samp -@item none - -@item default - -@item noref - -@item bidir - -@item nokey - -@item all - -@end table - -@item bidir_refine @var{integer} (@emph{encoding,video}) -Refine the two motion vectors used in bidirectional macroblocks. - -@item brd_scale @var{integer} (@emph{encoding,video}) -Downscale frames for dynamic B-frame decision. - -@item keyint_min @var{integer} (@emph{encoding,video}) -Set minimum interval between IDR-frames. - -@item refs @var{integer} (@emph{encoding,video}) -Set reference frames to consider for motion compensation. - -@item chromaoffset @var{integer} (@emph{encoding,video}) -Set chroma qp offset from luma. - -@item trellis @var{integer} (@emph{encoding,audio,video}) -Set rate-distortion optimal quantization. - -@item sc_factor @var{integer} (@emph{encoding,video}) -Set value multiplied by qscale for each frame and added to -scene_change_score. - -@item mv0_threshold @var{integer} (@emph{encoding,video}) -@item b_sensitivity @var{integer} (@emph{encoding,video}) -Adjust sensitivity of b_frame_strategy 1. - -@item compression_level @var{integer} (@emph{encoding,audio,video}) -@item min_prediction_order @var{integer} (@emph{encoding,audio}) -@item max_prediction_order @var{integer} (@emph{encoding,audio}) -@item timecode_frame_start @var{integer} (@emph{encoding,video}) -Set GOP timecode frame start number, in non drop frame format. - -@item request_channels @var{integer} (@emph{decoding,audio}) -Set desired number of audio channels. - -@item bits_per_raw_sample @var{integer} -@item channel_layout @var{integer} (@emph{decoding/encoding,audio}) - -Possible values: -@table @samp -@end table -@item request_channel_layout @var{integer} (@emph{decoding,audio}) - -Possible values: -@table @samp -@end table -@item rc_max_vbv_use @var{float} (@emph{encoding,video}) -@item rc_min_vbv_use @var{float} (@emph{encoding,video}) -@item ticks_per_frame @var{integer} (@emph{decoding/encoding,audio,video}) -@item color_primaries @var{integer} (@emph{decoding/encoding,video}) -@item color_trc @var{integer} (@emph{decoding/encoding,video}) -@item colorspace @var{integer} (@emph{decoding/encoding,video}) -@item color_range @var{integer} (@emph{decoding/encoding,video}) -@item chroma_sample_location @var{integer} (@emph{decoding/encoding,video}) - -@item log_level_offset @var{integer} -Set the log level offset. - -@item slices @var{integer} (@emph{encoding,video}) -Number of slices, used in parallelized encoding. - -@item thread_type @var{flags} (@emph{decoding/encoding,video}) -Select multithreading type. - -Possible values: -@table @samp -@item slice - -@item frame - -@end table -@item audio_service_type @var{integer} (@emph{encoding,audio}) -Set audio service type. - -Possible values: -@table @samp -@item ma -Main Audio Service -@item ef -Effects -@item vi -Visually Impaired -@item hi -Hearing Impaired -@item di -Dialogue -@item co -Commentary -@item em -Emergency -@item vo -Voice Over -@item ka -Karaoke -@end table - -@item request_sample_fmt @var{sample_fmt} (@emph{decoding,audio}) -Set sample format audio decoders should prefer. Default value is -@code{none}. - -@item pkt_timebase @var{rational number} -@end table - -@c man end CODEC OPTIONS - -@include decoders.texi -@include encoders.texi - @ignore @setfilename libavcodec @settitle media streams decoding and encoding library @c man begin SEEALSO -ffmpeg(1), ffplay(1), ffprobe(1), ffserver(1), libavutil(3) +ffmpeg(1), ffplay(1), ffprobe(1), ffserver(1), ffmpeg-codecs(1), libavutil(3) @c man end @c man begin AUTHORS -- cgit v1.2.1