| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
as 'static const' so they end up in the .rodata section instead of being
copied from there to the stack for every invocation of the corresponding
function. As a plus we end up in having a smaller binary as the "copy
from .rodata to stack" code isn't emitted by the compiler any more
(roughly -100 bytes).
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1252 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
from shared flash. The IMC will happily issue reads while we write,
issue writes while we read, and generally cause lots of havoc due to the
concurrent accesses it performs while flashrom is running.
A failing or corrupted read can be detected since r1145, and the worst
case is that the read aborts and the user has to retry.
A failing write is much more serious. It can be detected since r1145,
but if the SPI interface locks up, we can't continue writing nor can we
read the current chip contents.
If the IMC is inactive, there is no reason to worry. If the IMC is
active, flashrom will refuse to erase/write the chip with this patch.
The correct fix would be to stop the IMC during flashing, but apparently
the relevant registers are undocumented, so we take the safe route for
now until someone from AMD can give us more info.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Matthias Kretz <kretz@kde.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SB600/SB700/... SPI driver. If something else changes the values we
wrote, we will see severe read/write corruption.
sb600spi will now abort the access and return an error if it detects
this sort of corruption.
Note: This corruption can be caused by a few different events:
- IPMI/BMC/IMC accesses flash
- Other software accesses flash
The nature of flash access (read/write/ID/...) is irrelevant. Each such
access will cause corruption for all other accesses happening at the
same time.
Thanks to Matthias Kretz for testing this patch.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Matthias Kretz <kretz@kde.org>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1145 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Programmer specific functions are of absolutely no interest to any file
except those dealing with programmer specific actions (special SPI
commands and the generic core).
The new header structure is as follows (and yes, improvements are
possible):
flashchips.h flash chip IDs
chipdrivers.h chip-specific read/write/... functions
flash.h common header for all stuff that doesn't fit elsewhere
hwaccess.h hardware access functions
programmer.h programmer specific functions
coreboot_tables.h header from coreboot, internal programmer only
spi.h SPI command definitions
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1112 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
Actually check if the unlock worked instead of just assuming it worked.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
compat layer to allow converting the rest of flashrom later.
I actually have patches for most of the remaining conversion, but I
wanted to get this out and reviewed first.
Tested on Intel NM10 by David Hendricks.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
unistd.h was only used to get a definition of NULL in all files. Add our
own NULL #define and remove unistd.h from flash.h
stdio.h has no place in flash.h, it should be included only in files
which really need it.
Add #include statements in individual .c files where needed.
Replace a few printf with msg_* to eliminate the need for stdio.h.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1021 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- x86/x86_64 (little endian)
- PowerPC (big endian)
- MIPS (big+little endian)
No changes to programmer specific code. This means any drivers with MMIO
access will _not_ suddenly start working on big endian systems, but with
this patch everything is in place to fix them.
Compilation should work on all architectures listed above for all
drivers except nic3com and nicrealtek which require PCI Port IO which is
x86-only for now.
To compile without nic3com and nicrealtek, run
make distclean
make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no
Thanks to Misha Manulis for testing early versions of this patch on
PowerPC (big endian) with the satasii programmer.
Thanks to Segher Boessenkool for design review and for helping out with
compiler tricks and pointing out that we need eieio on PowerPC.
Thanks to Vladimir Serbinenko for compile testing on MIPS (little
endian) and PowerPC (big endian) and for runtime testing on MIPS (little
endian).
Thanks to David Daney for compile testing on MIPS (big endian).
Thanks to Uwe Hermann for compile and runtime testing on x86_64.
DO NOT RUN FLASHROM ON NON-X86 AFTER APPLYING THIS PATCH!
This patch only provides the infrastructure, but does not convert any
drivers, so flashrom will compile, but it won't do the right thing on
non-x86 platforms.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Misha Manulis <misha@manulis.com>
Acked-by: Vladimir 'phcoder/φ-coder' Serbinenko <phcoder@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1013 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
implementation, and all of them were insufficiently commented.
Create spi_write_chunked as a copy of spi_read_chunked and convert all
SPI programmers to use it.
No functional changes except:
- Bus Pirate uses 12 Byte writes instead of 8 Byte writes
- SB600 uses 5 Byte writes instead of 1 Byte writes
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: David Hendricks <dhendrix@google.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1005 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove chipdriver.h include from flash.h
Some of the spi programmer drivers required chipdrivers.h, needs fixing later:
it87spi.c
ichspi.c
sb600spi.c
wbsio_spi.c
buspirate_spi.c
ft2232spi.c
bitbang_spi.c
dediprog.c
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@914 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
| |
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@857 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
because they print hardware settings and desired configuration. They
help in getting a quick overview of hardware and software state on
startup and shutdown.
Programmer debug messages during flash chip access are mostly a
distraction in logs and should only be enabled if someone is having
problems which are suspected to stem from a programmer hardware or
programmer software bug. Disable those messages by default, they can be
reenabled by #define COMM_DEBUG in the affected programmer file.
An added benefit is a tremendous size reduction in verbose
probe/read/write/erase logs because only flash chip driver messages
remain. In some cases, logs will shrink from 65 MB to 10 kB or less.
The right(tm) fix would be two different debug levels (DEBUG and SPEW)
and the ability to differentiate between programmer debug messages and
flash chip debug messages. Until the design for the message printing
infrastructure is finished, this is the best stop-gap measure we can
get.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audioahcked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@834 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
| |
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
without warnings.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@723 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
erase functions in struct flashchip. I decided to fill in the info for a
few chips to illustrate how this works both for uniform and non-uniform
sector sizes.
struct eraseblock{
int size; /* Eraseblock size */
int count; /* Number of contiguous blocks with that size */
};
struct eraseblock doesn't correspond with a single erase block, but with
a group of contiguous erase blocks having the same size.
Given a (top boot block) flash chip with the following weird, but
real-life structure:
top
16384
8192
8192
32768
65536
65536
65536
65536
65536
65536
65536
bottom
we get the following encoding:
{65536,7},{32768,1},{8192,2},{16384,1}
Although the number of blocks is bigger than 4, the number of block
groups is only 4. If you ever add some flash chips with more than 4
contiguous block groups, the definition will not fit into the 4-member
array anymore and gcc will recognize that and error out. No undetected
overflow possible. In that case, you simply increase array size a bit.
For modern flash chips with uniform erase block size, you only need one
array member anyway.
Of course data types will need to be changed if you ever get flash chips
with more than 2^30 erase blocks, but even with the lowest known erase
granularity of 256 bytes, these flash chips will have to have a size of
a quarter Terabyte. I'm pretty confident we won't see such big EEPROMs
in the near future (or at least not attached in a way that makes
flashrom usable). For SPI chips, we even have a guaranteed safety factor
of 4096 over the maximum SPI chip size (which is 2^24). And if such a
big flash chip has uniform erase block size, you could even split it
among the 4 array members. If you change int count to unsigned int
count, the storable size doubles. So with a split and a slight change of
data type, the maximum ROM chip size is 2 Terabytes.
Since many chips have multiple block erase functions where the
eraseblock layout depends on the block erase function, this patch
couples the block erase functions with their eraseblock layouts.
struct block_eraser {
struct eraseblock{
unsigned int size; /* Eraseblock size */
unsigned int count; /* Number of contiguous blocks with that size */
} eraseblocks[NUM_ERASEREGIONS];
int (*block_erase) (struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen);
} block_erasers[NUM_ERASEFUNCTIONS];
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
| |
didn't include the automatic erase present in other chip drivers. Since
the majority is definitely auto-erase, change the remaining
explicit-erase cases to be auto-erase as well.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carlos Arnau Perez <cemede@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
Serprog compilation is now controlled by a Makefile variable.
Replace munmap with physunmap where appropriate.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@671 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
opcode and no additional data/address, the SPI controller will read one
byte too few from the chip. Basically, the last byte of the chip
response is discarded and will not end up in the FIFO. It is unclear if
the CS# line is set high too early as well.
That hardware bug is undocumented as of now, but I'm working with AMD to
add a detailed description of it to the errata.
Add loads of additional debugging to SB600/SB700 init.
Add explanatory comments for unintuitive code flow.
Thanks go to Uwe for testing quite a few iterations of the patch.
Kill the SB600 flash chip status register special case, which was a
somewhat misguided workaround for that hardware erratum.
Note for future added features in the SB600 SPI driver: It may be
possible to read up to 15 bytes of command response with overlapping
reads due to the ring buffer design of the FIFO if the command can be
repeated without ill effects. Same for skipping up to 7 bytes between
command and response.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
length.
Some drivers support only a few combinations of read/write length and
return error otherwise. Having a distinct return code for this error
means we can handle it in upper layers.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested it on Epia-m700 worked okay.
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
Tested-by: Jakob Bornecrantz <wallbraker@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@651 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some SPI opcodes need to be sent in direct succession after each other
without any chip deselect happening in between. A prominent example is
WREN (Write Enable) directly before PP (Page Program). Intel calls the
first opcode in such a row "preopcode".
Right now, we ignore the direct succession requirement completely and it
works pretty well because most onboard SPI masters have a timing or
heuristics which make the problem disappear.
The FT2232 SPI flasher is different. Since it is an external flasher,
timing is very different to what we can expect from onboard flashers and
this leads to failure at slow speeds.
This patch allows any function to submit multiple SPI commands in a
stream to any flasher. Support in the individual flashers isn't
implemented yet, so there is one generic function which passes the each
command in the stream one-by-one to the command functions of the
selected SPI flash driver.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
Tested-by: Jakob Bornecrantz <wallbraker@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@645 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
Make a few local functions in sb600spi.c static.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@623 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
single chip supported by flashrom.
That means you can tell flashrom to read exactly bytes 12345-56789
(start 12345, length 44445) and it will not fetch a single byte more.
Uwe tested this on one LPC, one SPI, and one parallel flash board.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@596 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And even when it checks if the erase worked, the result of that check is
often ignored.
Convert all erase functions and actually check return codes
almost everywhere.
Check inside all erase_* routines if erase worked, not outside.
erase_sector_jedec and erase_block_jedec have changed prototypes to
enable erase checking.
Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was partly due to a design problem in the abstraction layer.
There should be exactly two different functions for reading SPI chips:
- memory mapped reads
- SPI command reads.
Each of them should be contained in a separate function, optionally
taking parameters where needed.
This patch solves the problems mentioned above, shortens the code and
makes the code logic a lot more obvious.
Since open-coding the min() function leads to errors, include it in this
patch as well.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@589 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
only differentiates between SPI and non-SPI. Anyone who knows more about
a specific flash chip should feel free to update it.
The existing flashbus variable was abused to denote the SPI controller
type. Use an aptly named variable for that purpose.
Once this patch is merged, the chipset/programmer init functions can set
supported flash chip types and flashrom can automatically select only
matching probe/read/erase/write functions.
A side benefit of that will be the elimination of the Winbond W29EE011
vs. AMIC A49LF040A conflict.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@556 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
others didn't (and risked non-execution of side effects) and even with
volatile, some accesses looked dubious.
Since the MMIO accessor functions and the onboard flash accessor
functions are functionally identical (but have different signatures),
make the flash accessors wrappers for the MMIO accessors.
For some of the conversions, I used Coccinelle. Semantic patch follows:
@@
typedef uint8_t;
expression a;
volatile uint8_t *b;
@@
- b[a]
+ *(b + a)
@@
expression a;
volatile uint8_t *b;
@@
- *(b) |= (a);
+ *(b) = *(b) | (a);
@@
expression a;
volatile uint8_t *b;
@@
- *(b) = (a);
+ mmio_writeb(a, b);
@@
volatile uint8_t *b;
@@
- *(b)
+ mmio_readb(b)
@@
type T;
T b;
@@
(
mmio_readb
|
mmio_writeb
)
(...,
- (T)
- (b)
+ b
)
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Uwe tested read, write, erase with this patch on a random board to make
sure nothing breaks.
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@524 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
Build-tested on 32bit x86.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@521 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
outside AAI mode.
Change SPI architecture to handle 1-byte chunk chip writing differently
from 256-byte chunk chip writing.
Annotate SPI chip write functions with _256 or _1 suffix denoting the
number of bytes they write at maximum.
The 1-byte chunk writing is cut-n-pasted to different SPI drivers right
now. A later patch can move them to the generic spi_chip_write_1.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
should handle such special opcode failure gracefully on ICH and
compatible chipsets.
This fixes chip erase on almost all ICH+VIA SPI masters.
Thanks to Ali Nadalizadeh for helping track down this bug!
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@484 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
Fix typo. Add missing copyright year.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@428 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
| |
Copyright update by Jason Wang for freshly written sb600 code.
Signed-off-by: Jason Wang<Qingpei.wang@amd.com>
Reviewed-by: Joe, Bao <Zheng.Bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add support for the AMD/ATI SB600 southbridge SPI functionality.
This has been tested by Uwe Hermann on an RS690/SB600 board.
Signed-off-by: Jason Wang <Qingpei.Wang@amd.com>
Reviewed-by: Joe Bao <zheng.bao@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@351 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|