From 1215c2d2d9a003ff8153b8bb7d37028919206f6d Mon Sep 17 00:00:00 2001 From: hailfinger Date: Sat, 16 Jan 2016 23:45:25 +0000 Subject: Add atapromise programmer Supported controllers are Promise PDC20262 (FastTrak66/Ultra66), PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100). At least the Ultra100 only has address lines A0-A14 wired up, limiting addressable chip size to 32 kB. The flash chips mounted on those controllers usually is 128 kB, i.e. parts of the flash chip are inaccessible. As a workaround, the driver implicitly truncates the size of all flash chips to 32 kB. Works well for the factory installed flash. Do NOT use as a generic programmer for chips >32 kB. Signed-off-by: Joseph C. Lehner Acked-by: Carl-Daniel Hailfinger Acked-by: Urja Rannikko git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1916 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- Makefile | 14 +++++ atapromise.c | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ flashrom.8.tmpl | 17 ++++-- flashrom.c | 12 ++++ programmer.h | 10 ++++ 5 files changed, 226 insertions(+), 4 deletions(-) create mode 100644 atapromise.c diff --git a/Makefile b/Makefile index 21fa8b0..7377c71 100644 --- a/Makefile +++ b/Makefile @@ -227,6 +227,11 @@ UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes else override CONFIG_ATAVIA = no endif +ifeq ($(CONFIG_ATAPROMISE), yes) +UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes +else +override CONFIG_ATAPROMISE = no +endif ifeq ($(CONFIG_IT8212), yes) UNSUPPORTED_FEATURES += CONFIG_IT8212=yes else @@ -449,6 +454,9 @@ CONFIG_ATAHPT ?= no # VIA VT6421A LPC memory support CONFIG_ATAVIA ?= yes +# Promise ATA controller support. +CONFIG_ATAPROMISE ?= no + # Always enable FT2232 SPI dongles for now. CONFIG_FT2232_SPI ?= yes @@ -626,6 +634,12 @@ PROGRAMMER_OBJS += atavia.o NEED_PCI := yes endif +ifeq ($(CONFIG_ATAPROMISE), yes) +FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1' +PROGRAMMER_OBJS += atapromise.o +NEED_PCI := yes +endif + ifeq ($(CONFIG_IT8212), yes) FEATURE_CFLAGS += -D'CONFIG_IT8212=1' PROGRAMMER_OBJS += it8212.o diff --git a/atapromise.c b/atapromise.c new file mode 100644 index 0000000..d44ff0d --- /dev/null +++ b/atapromise.c @@ -0,0 +1,177 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2015 Joseph C. Lehner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include +#include +#include "flash.h" +#include "programmer.h" +#include "hwaccess.h" + +#define MAX_ROM_DECODE (32 * 1024) +#define ADDR_MASK (MAX_ROM_DECODE - 1) + +/* + * In the absence of any public docs on the PDC2026x family, this programmer was created through a mix of + * reverse-engineering and trial and error. + * + * The only device tested is an Ultra100 controller, but the logic for programming the other 2026x controllers + * is the same, so it should, in theory, work for those as well. + * + * While the tested Ultra100 controller used a 128 kB MX29F001T chip, A16 and A15 showed continuity to ground, + * thus limiting the the programmer on this card to 32 kB. Without other controllers to test this programmer on, + * this is currently a hard limit. Note that ROM files for these controllers are 16 kB only. + * + * Since flashrom does not support accessing flash chips larger than the size limit of the programmer (the + * tested Ultra100 uses a 128 kB MX29F001T chip), the chip size is hackishly adjusted in atapromise_limit_chip. + */ + +static uint32_t io_base_addr = 0; +static uint32_t rom_base_addr = 0; + +static uint8_t *atapromise_bar = NULL; +static size_t rom_size = 0; + +const struct dev_entry ata_promise[] = { + {0x105a, 0x4d38, NT, "Promise", "PDC20262 (FastTrak66/Ultra66)"}, + {0x105a, 0x0d30, NT, "Promise", "PDC20265 (FastTrak100 Lite/Ultra100)"}, + {0x105a, 0x4d30, OK, "Promise", "PDC20267 (FastTrak100/Ultra100)"}, + {0}, +}; + +static void atapromise_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); +static uint8_t atapromise_chip_readb(const struct flashctx *flash, const chipaddr addr); + +static const struct par_master par_master_atapromise = { + .chip_readb = atapromise_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = atapromise_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, +}; + +void *atapromise_map(const char *descr, uintptr_t phys_addr, size_t len) +{ + /* In case fallback_map ever returns something other than NULL. */ + return NULL; +} + +static void atapromise_limit_chip(struct flashchip *chip) +{ + static uint32_t last_model_id = 0; + unsigned int i, size; + + if (chip->model_id == last_model_id) + return; + + size = chip->total_size * 1024; + if (size > rom_size) { + /* Undefine all block_erasers that don't operate on the whole chip, + * and adjust the eraseblock size of the one that does. + */ + for (i = 0; i < NUM_ERASEFUNCTIONS; ++i) { + if (chip->block_erasers[i].eraseblocks[0].size != size) { + chip->block_erasers[i].eraseblocks[0].count = 0; + chip->block_erasers[i].block_erase = NULL; + } else { + chip->block_erasers[i].eraseblocks[0].size = rom_size; + break; + } + } + + if (i != NUM_ERASEFUNCTIONS) { + chip->total_size = rom_size / 1024; + if (chip->page_size > rom_size) + chip->page_size = rom_size; + } else { + msg_pdbg("Failed to adjust size of chip \"%s\" (%d kB).\n", chip->name, + chip->total_size); + } + } + + last_model_id = chip->model_id; +} + +int atapromise_init(void) +{ + struct pci_dev *dev = NULL; + + if (rget_io_perms()) + return 1; + + dev = pcidev_init(ata_promise, PCI_BASE_ADDRESS_4); + if (!dev) + return 1; + + io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_4) & 0xfffe; + if (!io_base_addr) { + return 1; + } + + /* Not exactly sure what this does, because flashing seems to work + * well without it. However, PTIFLASH does it, so we do it too. + */ + OUTB(1, io_base_addr + 0x10); + + rom_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_5); + if (!rom_base_addr) { + msg_pdbg("Failed to read BAR5\n"); + return 1; + } + + rom_size = dev->rom_size > MAX_ROM_DECODE ? MAX_ROM_DECODE : dev->rom_size; + atapromise_bar = (uint8_t*)rphysmap("Promise", rom_base_addr, rom_size); + if (atapromise_bar == ERROR_PTR) { + return 1; + } + + max_rom_decode.parallel = rom_size; + register_par_master(&par_master_atapromise, BUS_PARALLEL); + + msg_pwarn("Do not use this device as a generic programmer. It will leave anything outside\n" + "the first %zu kB of the flash chip in an undefined state. It works fine for the\n" + "purpose of updating the firmware of this device (padding may neccessary).\n", + rom_size / 1024); + + return 0; +} + +static void atapromise_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) +{ + uint32_t data; + + atapromise_limit_chip(flash->chip); + data = (rom_base_addr + (addr & ADDR_MASK)) << 8 | val; + OUTL(data, io_base_addr + 0x14); +} + +static uint8_t atapromise_chip_readb(const struct flashctx *flash, const chipaddr addr) +{ + atapromise_limit_chip(flash->chip); + return pci_mmio_readb(atapromise_bar + (addr & ADDR_MASK)); +} + +#else +#error PCI port I/O access is not supported on this architecture yet. +#endif diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 517c00e..5b6e63c 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -233,6 +233,8 @@ cards)" .sp .BR "* atavia" " (for flash ROMs on VIA VT6421A SATA controllers)" .sp +.BR "* atapromise" " (for flash ROMs on Promise PDC2026x ATA/RAID controllers)" +.sp .BR "* it8212" " (for flash ROMs on ITE IT8212F ATA/RAID controller)" .sp .BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family \ @@ -636,7 +638,7 @@ is an 8-bit hexadecimal value. .SS .BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\ , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\ -, " satamv" , " atahpt", " atavia " and " it8212 " programmers +, " satamv" , " atahpt", " atavia ", " atapromise " and " it8212 " programmers .IP These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported @@ -669,6 +671,13 @@ will be interpreted as usual (leading 0x (0) for hexadecimal (octal) values, or For more information please see .URLB https://flashrom.org/VT6421A "its wiki page" . .SS +.BR "atapromise " programmer +.IP +This programmer is currently limited to 32 kB, regardless of the actual size of the flash chip. This stems +from the fact that, on the tested device (a Promise Ultra100), not all of the chip's address lines were +actually connected. You may use this programmer to flash firmware updates, since these are only 16 kB in +size (padding to 32 kB is required). +.SS .BR "nicintel_eeprom " programmer .IP This is the first programmer module in flashrom that does not provide access to NOR flash chips but EEPROMs @@ -1059,8 +1068,8 @@ needs raw I/O port access. .BR satasii ", " nicintel ", " nicintel_eeprom " and " nicintel_spi need PCI configuration space read access and raw memory access. .sp -.B satamv -needs PCI configuration space read access, raw I/O port access and raw memory +.BR satamv " and " atapromise +need PCI configuration space read access, raw I/O port access and raw memory access. .sp .B serprog @@ -1076,7 +1085,7 @@ need access to the USB device via libusb. needs no access permissions at all. .sp .BR internal ", " nic3com ", " nicrealtek ", " nicnatsemi ", " -.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt" and " atavia +.BR gfxnvidia ", " drkaiser ", " satasii ", " satamv ", " atahpt ", " atavia " and " atapromise have to be run as superuser/root, and need additional raw access permission. .sp .BR serprog ", " buspirate_spi ", " dediprog ", " usbblaster_spi ", " ft2232_spi " and " pickit2_spi diff --git a/flashrom.c b/flashrom.c index 3853e19..35bcd8a 100644 --- a/flashrom.c +++ b/flashrom.c @@ -182,6 +182,18 @@ const struct programmer_entry programmer_table[] = { }, #endif +#if CONFIG_ATAPROMISE == 1 + { + .name = "atapromise", + .type = PCI, + .devs.dev = ata_promise, + .init = atapromise_init, + .map_flash_region = atapromise_map, + .unmap_flash_region = fallback_unmap, + .delay = internal_delay, + }, +#endif + #if CONFIG_IT8212 == 1 { .name = "it8212", diff --git a/programmer.h b/programmer.h index 97f0ffa..ff7cf5f 100644 --- a/programmer.h +++ b/programmer.h @@ -57,6 +57,9 @@ enum programmer { #if CONFIG_ATAVIA == 1 PROGRAMMER_ATAVIA, #endif +#if CONFIG_ATAPROMISE == 1 + PROGRAMMER_ATAPROMISE, +#endif #if CONFIG_IT8212 == 1 PROGRAMMER_IT8212, #endif @@ -460,6 +463,13 @@ void *atavia_map(const char *descr, uintptr_t phys_addr, size_t len); extern const struct dev_entry ata_via[]; #endif +/* atapromise.c */ +#if CONFIG_ATAPROMISE == 1 +int atapromise_init(void); +void *atapromise_map(const char *descr, uintptr_t phys_addr, size_t len); +extern const struct dev_entry ata_promise[]; +#endif + /* it8212.c */ #if CONFIG_IT8212 == 1 int it8212_init(void); -- cgit v1.2.1