From 8f953f4d0e74647e9c986c1f9f7f13867a242415 Mon Sep 17 00:00:00 2001 From: stefanct Date: Sat, 23 Jan 2016 23:27:58 +0000 Subject: dediprog: support new communication protocol, cleanup and enable by default. The new protocol changes some commands, so adjust the code to support these. Use helper functions to reduce duplication in libusb calls. Testing with real hardware showed that the maximum read size via the control endpoint is about 16 bytes although specification does not mention that. Dediprog SF600 is not supported yet. Based on the following chromiumos changes: Change-Id: Ibd1e27d9e8273ba879b9b5d95675b99596255c89 Change-Id: Ifc33e7b1eed5b0cb80f83458fa24741a577fa46a Additionally, some ideas from Alex for cleaner code were incorporated as well. Tested on an SF100 V4 with both firmware generations PREWing a M25PX80 and AT45DB041D (the latter is using dediprog_spi_send_command() instead of optimized functions which make it a good test vehicle). Signed-off-by: Simon Glass Signed-off-by: David Hendricks Signed-off-by: Alexandru Gagniuc Signed-off-by: Stefan Tauner Acked-by: Stefan Tauner git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1918 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index f416e76..31a9912 100644 --- a/Makefile +++ b/Makefile @@ -493,8 +493,8 @@ CONFIG_OGP_SPI ?= yes # Always enable Bus Pirate SPI for now. CONFIG_BUSPIRATE_SPI ?= yes -# Disable Dediprog SF100 until support is complete and tested. -CONFIG_DEDIPROG ?= no +# Always enable Dediprog SF100 for now. +CONFIG_DEDIPROG ?= yes # Always enable Marvell SATA controllers for now. CONFIG_SATAMV ?= yes -- cgit v1.2.1