From f6c842741e8649110f31a513314ea00ac1d8dec7 Mon Sep 17 00:00:00 2001 From: stuge Date: Sun, 27 Jan 2008 16:21:21 +0000 Subject: Original v2 revision: 3082 Make the vendor name optional in the -m flashrom parameter when there's only one board name that matches. The full syntax still works, and is required when two vendors have boards with the same names. Signed-off-by: Peter Stuge Acked-by: Stefan Reinauer git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@190 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- README | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'README') diff --git a/README b/README index 312304b..7f16715 100644 --- a/README +++ b/README @@ -23,20 +23,20 @@ Usage ----- $ flashrom [-rwvEVfh] [-c chipname] [-s exclude_start] [-e exclude_end] - [-m vendor:part] [-l file.layout] [-i imagename] [file] - -r | --read: read flash and save into file - -w | --write: write file into flash (default when - file is specified) - -v | --verify: verify flash against file - -E | --erase: erase flash device - -V | --verbose: more verbose output - -c | --chip : probe only for specified flash chip - -s | --estart : exclude start position - -e | --eend : exclude end postion - -m | --mainboard : override mainboard settings - -f | --force: force write without checking image - -l | --layout : read rom layout from file - -i | --image : only flash image name from flash layout + [-m [vendor:]part] [-l file.layout] [-i imagename] [file] + -r | --read: read flash and save into file + -w | --write: write file into flash (default when + file is specified) + -v | --verify: verify flash against file + -E | --erase: erase flash device + -V | --verbose: more verbose output + -c | --chip : probe only for specified flash chip + -s | --estart : exclude start position + -e | --eend : exclude end postion + -m | --mainboard <[vendor:]part>: override mainboard settings + -f | --force: force write without checking image + -l | --layout : read rom layout from file + -i | --image : only flash image name from flash layout If no file is specified, then all that happens is that flash info is dumped and the flash chip is set to writable. -- cgit v1.2.1