diff options
Diffstat (limited to 'closures/compiler/msg/errorpl.msg')
-rw-r--r-- | closures/compiler/msg/errorpl.msg | 2385 |
1 files changed, 2385 insertions, 0 deletions
diff --git a/closures/compiler/msg/errorpl.msg b/closures/compiler/msg/errorpl.msg new file mode 100644 index 0000000000..0cec618f6a --- /dev/null +++ b/closures/compiler/msg/errorpl.msg @@ -0,0 +1,2385 @@ +# +# This file is part of the Free Pascal Compiler +# Copyright (c) 1999-2000 by the Free Pascal Development team +# +# Polish (CP 852) Language File for Free Pascal +# +# See the file COPYING.FPC, included in this distribution, +# for details about the copyright. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# +# The constants are build in the following order: +# <part>_<type>_<txtidentifier> +# +# <part> is the part of the compiler the message is used +# asmr_ assembler parsing +# asmw_ assembler writing/binary writers + +# unit_ unit handling +# scan_ scanner +# parser_ parser +# type_ type checking +# general_ general info +# exec_ calls to assembler, linker, binder +# +# <type> the type of the message it should normally used for +# f_ fatal error +# e_ error +# w_ warning +# n_ note +# h_ hint +# i_ info +# l_ linenumber +# u_ used +# t_ tried +# c_ conditional +# d_ debug message +# x_ executable informations +# + +# +# General +# +# 01016 is the last used one +# +# BeginOfTeX +% \section{General compiler messages} +% This section gives the compiler messages which are not fatal, but which +% display useful information. The number of such messages can be +% controlled with the various verbosity level \var{-v} switches. +% \begin{description} +general_t_compilername=01000_T_Kompilator: $1 +% When the \var{-vt} switch is used, this line tells you what compiler +% is used. +general_d_sourceos=01001_D_OS kompilatora: $1 +% When the \var{-vd} switch is used, this line tells you what the source +% operating system is. +general_i_targetos=01002_I_Docelowy OS: $1 +% When the \var{-vd} switch is used, this line tells you what the target +% operating system is. +general_t_exepath=01003_T_cieka narzdzi: $1 +% When the \var{-vt} switch is used, this line tells you where the compiler +% looks for its binaries. +general_t_unitpath=01004_T_cieka moduw: $1 +% When the \var{-vt} switch is used, this line tells you where the compiler +% looks for compiled units. You can set this path with the \var{-Fu} +general_t_includepath=01005_T_cieka include'w: $1 +% When the \var{-vt} switch is used, this line tells you where the compiler +% looks for its include files (files used in \var{\{\$I xxx\}} statements). +% You can set this path with the \var{-I} option. +general_t_librarypath=01006_T_cieka bibliotek: $1 +% When the \var{-vt} switch is used, this line tells you where the compiler +% looks for the libraries. You can set this path with the \var{-Fl} option. +general_t_objectpath=01007_T_cieka obiektw: $1 +% When the \var{-vt} switch is used, this line tells you where the compiler +% looks for object files you link in (files used in \var{\{\$L xxx\}} statements). +% You can set this path with the \var{-Fo} option. +general_i_abslines_compiled=01008_I_$1 linii skompilowanych w $2 sek +% When the \var{-vi} switch is used, the compiler reports the number +% of lines compiled, and the time it took to compile them (real time, +% not program time). +general_f_no_memory_left=01009_F_Brak pamici +% The compiler doesn't have enough memory to compile your program. There are +% several remedies for this: +% \begin{itemize} +% \item If you're using the build option of the compiler, try compiling the +% different units manually. +% \item If you're compiling a huge program, split it up in units, and compile +% these separately. +% \item If the previous two don't work, recompile the compiler with a bigger +% heap (you can use the \var{-Ch} option for this, \seeo{Ch}) +% \end{itemize} +general_i_writingresourcefile=01010_I_Zapisywanie pliku zasobw: $1 +% This message is shown when the compiler writes the Resource String Table +% file containing all the resource strings for a program. +general_e_errorwritingresourcefile=01011_E_Bd podczas zapisywania pliku zasobw: $1 +% This message is shown when the compiler encountered an error when writing +% the Resource String Table file +general_i_fatal=01012_I_Bd krytyczny: +% Prefix for Fatal Errors +general_i_error=01013_I_Bd: +% Prefix for Errors +general_i_warning=01014_I_Ostrzeenie: +% Prefix for Warnings +general_i_note=01015_I_Nota: +% Prefix for Notes +general_i_hint=01016_I_Podpowied: +% Prefix for Hints +general_e_path_does_not_exist=01017_E_cieka "$1" nie istnieje +% The specified path does not exist. +general_e_compilation_aborted=01018_E_Kompilacja zatrzymana +% \end{description} +# +# Scanner +# +# 02063 is the last used one +# +% \section{Scanner messages.} +% This section lists the messages that the scanner emits. The scanner takes +% care of the lexical structure of the pascal file, i.e. it tries to find +% reserved words, strings, etc. It also takes care of directives and +% conditional compiling handling. +% \begin{description} +scan_f_end_of_file=02000_F_Nieoczekiwany koniec pliku +% this typically happens in one of the following cases : +% \begin{itemize} +% \item The source file ends before the final \var{end.} statement. This +% happens mostly when the \var{begin} and \var{end} statements aren't +% balanced; +% \item An include file ends in the middle of a statement. +% \item A comment wasn't closed. +% \end{itemize} +scan_f_string_exceeds_line=02001_F_String przekracza jedn lini +% You forgot probably to include the closing ' in a string, so it occupies +% multiple lines. +scan_f_illegal_char=02002_F_Nieprawidowy znak $1 ($2) +% An illegal character was encountered in the input file. +scan_f_syn_expected=02003_F_Bd skadni, oczekiwano $1 ale napotkano $2 +% This indicates that the compiler expected a different token than +% the one you typed. It can occur almost everywhere where you make a +% mistake against the pascal language. +scan_t_start_include_file=02004_T_Rozpoczcie czytania pliku include $1 +% When you provide the \var{-vt} switch, the compiler tells you +% when it starts reading an included file. +scan_w_comment_level=02005_W_Znaleziono komentarz $1 stopnia +% When the \var{-vw} switch is used, then the compiler warns you if +% it finds nested comments. Nested comments are not allowed in Turbo Pascal +% and can be a possible source of errors. +scan_n_ignored_switch=02008_N_Zignorowany przecznik kompilatora $1 +% With \var{-vn} on, the compiler warns if it ignores a switch +scan_w_illegal_switch=02009_W_Nieprawidowy przecznik kompilatora $1 +% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler +% doesn't know. +scan_w_switch_is_global=02010_W_Przecznik globalny w nieprawidowym miejscu +% The compiler switch is misplaced, and should be located at +% the start of the unit or program. +scan_e_illegal_char_const=02011_E_Nieprawidowa staa znakowa +% This happens when you specify a character with its ASCII code, as in +% \var{\#96}, but the number is either illegal, or out of range. +scan_f_cannot_open_input=02012_F_Nie mona otworzy pliku $1 +% \fpc cannot find the program or unit source file you specified on the +% command line. +scan_f_cannot_open_includefile=02013_F_Nie mona otworzy pliku include $1 +% \fpc cannot find the source file you specified in a \var{\{\$include ..\}} +% statement. +scan_w_only_pack_records=02015_W_Pola rekordw mog by wyrwnane tylko do 1,2,4,8,16 lub 32 bajtw +% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} } +% with an illegal value for \var{n}. For $PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C, +% NORMAL, DEFAULT, and for $ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON, +% OFF. Under mode MacPas $ALIGN also supports MAC68K, POWER and RESET. +scan_w_only_pack_enum=02016_W_Wyliczenia mog by zapisane tylko na 1, 2 lub 4 bajtach +% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for +% \var{n}. Only 1,2 or 4 are valid in this case. +scan_e_endif_expected=02017_E_Oczekiwano $ENDIF dla $1 $2 zdefiniowanych w linii $3 +% Your conditional compilation statements are unbalanced. +scan_e_preproc_syntax_error=02018_E_Bd skadni podczas parsowania dyrektyw kompilacji warunkowej +% There is an error in the expression following the \var{\{\$if ..\}} compiler +% directive. +scan_e_error_in_preproc_expr=02019_E_Bd obliczania wyraenia kompilacji warunkowej +% There is an error in the expression following the \var{\{\$if ..\}} compiler +% directive. +scan_w_macro_cut_after_255_chars=02020_W_Tre makra zostaa obcita po 255 znaku +% The contents of macros canno be longer than 255 characters. +scan_e_endif_without_if=02021_E_ENDIF bez IF(N)DEF +% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced. +scan_f_user_defined=02022_F_Zdefiniowany przez uytkownika: $1 +% A user defined fatal error occurred. see also the \progref +scan_e_user_defined=02023_E_Zdefiniowany przez uytkownika: $1 +% A user defined error occurred. see also the \progref +scan_w_user_defined=02024_W_Zdefiniowane przez uytkownika: $1 +% A user defined warning occurred. see also the \progref +scan_n_user_defined=02025_N_Zdefiniowana przez uytkownika: $1 +% A user defined note was encountered. see also the \progref +scan_h_user_defined=02026_H_Zdefiniowana przez uytkownika: $1 +% A user defined hint was encountered. see also the \progref +scan_i_user_defined=02027_I_Zdefiniowana przez uytkownika: $1 +% User defined information was encountered. see also the \progref +scan_e_keyword_cant_be_a_macro=02028_E_Sowo kluczowe nie moe zosta przedefiniowane przez makro +% You cannot redefine keywords with macros. +scan_f_macro_buffer_overflow=02029_F_Przepenienie bufora podczas czytania lub rozwijania makra +% Your macro or its result was too long for the compiler. +scan_e_macro_deep_ten=02030_E_Rozwijanie makra przerwane po 16 rozwiniciach. +% When expanding a macro macros have been nested to a level of 16. +% The compiler will expand no further, since this may be a sign that +% recursion is used. +scan_e_wrong_styled_switch=02031_E_Przeczniki kompilatora nie s dozwolone w komentarzach typu (* ... *) +% Compiler switches should always be between \var{\{ \}} comment delimiters. +scan_d_handling_switch=02032_D_Obsugiwanie przecznika "$1" +% When you set debugging info on (\var{-vd}) the compiler tells you when it +% is evaluating conditional compile statements. +scan_c_endif_found=02033_C_Znaleziono ENDIF $1 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_ifdef_found=02034_C_Znaleziono IFDEF $1 , $2 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_ifopt_found=02035_C_Znalezino IFOPT $1 , $2 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_if_found=02036_C_Znaleziono IF $1 , $2 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_ifndef_found=02037_C_Znaleziono IFNDEF $1 , $2 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_else_found=02038_C_Znaleziono ELSE $1 , $2 +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements. +scan_c_skipping_until=02039_C_Omijanie... +% When you turn on conditional messages(\var{-vc}), the compiler tells you +% where it encounters conditional statements, and whether it is skipping or +% compiling parts. +scan_i_press_enter=02040_I_Nacinij <enter> aby kontynuowa +% When the \var{-vi} switch is used, the compiler stops compilation +% and waits for the \var{Enter} key to be pressed when it encounters +% a \var{\{\$STOP\}} directive. +scan_w_unsupported_switch=02041_W_Nieobsugiwany przecznik $1 +% When warnings are turned on (\var{-vw}) the compiler warns you about +% unsupported switches. This means that the switch is used in Delphi or +% Turbo Pascal, but not in \fpc +scan_w_illegal_directive=02042_W_Nieprawidowa dyrektywa $1 +% When warings are turned on (\var{-vw}) the compiler warns you about +% unrecognised switches. For a list of recognised switches, \progref +scan_t_back_in=02043_TL_Z powrotem w $1 +% When you use (\var{-vt}) the compiler tells you when it has finished +% reading an include file. +scan_w_unsupported_app_type=02044_W_Nieprawidowy typ aplikacji: $1 +% You get this warning, if you specify an unknown application type +% with the directive \var{\{\$APPTYPE\}} +scan_w_app_type_not_support=02045_W_Typ aplikacji nieobsugiwany przez docelowy OS +% The \var{\{\$APPTYPE\}} directive is supported by win32 applications only. +scan_w_description_not_support=02046_W_Dyrektywa DESCRIPTION jest obsugiwany tylko przez OS2 i Win32 +% The \var{\{\$DESCRIPTION\}} directive is only supported for OS2 and Win32 targets. +scan_n_version_not_support=02047_N_Dyrektywa VERSION nie jest obsugiwana przez OS +% The \var{\{\$VERSION\}} directive is only supported by win32 target. +scan_n_only_exe_version=02048_N_Dyrektywa VERSION jest dostna tylko dla programw i DLLi +% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources. +scan_w_wrong_version_ignored=02049_W_Nieprawidowy format dyrektywy VERSION $1 +% The \var{\{\$VERSION\}} directive format is majorversion.minorversion +% where majorversion and minorversion are words. +scan_w_unsupported_asmmode_specifier=02050_W_Nieprawidowy styl asemblera $1 +% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} +% the compiler didn't recognize the mode you specified. +scan_w_no_asm_reader_switch_inside_asm=02051_W_Przecznik stylu asemblera niedozwolony w bloku asemblera, $1 bdzie dziaa dopiero w nastpnym bloku +% It is not possible to switch from one assembler reader to another +% inside an assmebler block. The new reader will be used for next +% assembler statement only. +scan_e_wrong_switch_toggle=02052_E_Za warto przecznika, uyj ON/OFF lub +/- +% You need to use ON or OFF or a + or - to toggle the switch +scan_e_resourcefiles_not_supported=02053_E_Pliki zasobw nie s obsugiwane przez OS +% The target you are compiling for doesn't support resource files. +scan_w_include_env_not_found=02054_W_Zmienna rodowiskowa $1 nie odnaleziona +% The included environment variable can't be found in the environment, it'll +% be replaced by an empty string instead. +scan_e_invalid_maxfpureg_value=02055_E_Nieprawidowa warto limitu rejestru FPU +% Valid values for this directive are 0..8 and NORMAL/DEFAULT +scan_w_only_one_resourcefile_supported=02056_W_Tylko jeden plik zasobw jest obsugiwany przez docelowy OS +% The target you are compiling for supports only one resource file. +% The first resource file found is used, the others are discarded. +scan_w_macro_support_turned_off=02057_W_Obsuga makr jest wyczona +% A macro declaration has been found, but macro support is currently off, +% so the declaration will be ignored. To turn macro support on compile with +% -Sm on the commandline or add {$MACRO ON} in the source +scan_e_invalid_interface_type=02058_E_Nieprawidowy typ interfejsu. Prawidowe s COM, CORBA i DEFAULT. +% The interface type that was specified is not supported +scan_w_appid_not_support=02060_W_APPNAME jest obsugiwane tylko przez PalmOS +% The \var{\{\$APPID\}} directive is only supported for the PalmOS target. +scan_w_appname_not_support=02061_W_Dyrektywa APPNAME jest obsugiwana tylko przez PalmOS +% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target. +scan_e_string_exceeds_255_chars=02061_E_Stae acuchowe nie mog by dusze ni 255 znakw +% A single string constant can contain at most 255 chars. Try splitting up the +% string in multiple smaller parts and concatenate them with a + operator. +scan_f_include_deep_ten=02062_F_Przekroczono maksymaln ilo zagniedonych include (16) +% When including include files the files have been nested to a level of 16. +% The compiler will expand no further, since this may be a sign that +% recursion is used. +scan_e_too_many_push=02063_F_Zbyt duo poziomw PUSH +% A maximum of 20 levels is allowed. This error occurs only in mode MacPas. +scan_e_too_many_pop=02064_E_Napotkano POP bez poprzedzajcego go PUSH +% This error occurs only in mode MacPas. +scan_e_error_macro_lacks_value=02065_E_Makro lub zmienna "$1" nie ma przypisanej wartoci +% Thus the conditional compile time expression cannot be evaluated. +scan_e_wrong_switch_toggle_default=02066_E_Nieprawidowy przecznik, uyj ON/OFF/DEFAULT lub +/-/* +% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch +scan_e_mode_switch_not_allowed=02067_E_Przecznik trybu "$1" jest niedozwolony w tym miejscu +% A mode switch has already been encountered, or, in case of option -Mmacpas, +% a mode switch occur after UNIT. +scan_e_error_macro_undefined=02068_E_Zmienna "$1" jest niezdefiniowana +% Thus the conditional compile time expression cannot be evaluated. +scan_e_utf8_bigger_than_65535=02069_E_Napotkano kod UTF-8 wikszy od 65535 +% \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535 +scan_e_utf8_malformed=02070_E_Znieksztacony string UTF-8 +% The given string isn't a valid UTF-8 string +scan_c_switching_to_utf8=02071_C_Napotkano sygnatur UTF-8, uycie kodowania UTF-8 +% The compiler found an UTF-8 encoding signature ($ef, $bb, $bf) at the beginning of a file, +% so it interprets it as an UTF-8 file +% \end{description} +# +# Parser +# +# 03192 is the last used one +# +% \section{Parser messages} +% This section lists all parser messages. The parser takes care of the +% semantics of you language, i.e. it determines if your pascal constructs +% are correct. +% \begin{description} +parser_e_syntax_error=03000_E_Parser - Bd skadni +% An error against the Turbo Pascal language was encountered. This happens +% typically when an illegal character is found in the sources file. +parser_e_dont_nest_interrupt=03004_E_Procedura typu INTERRUPT nie moe by zagniedona +% An \var{INTERRUPT} procedure must be global. +parser_w_proc_directive_ignored=03005_W_Dyrektywa $1 zignorowana +% The specified is ignored by FPC programs. +parser_e_no_overload_for_all_procs=03006_E_Nie wszystkie deklaracje $1 s przecione +% When you want to use overloading using the \var{OVERLOAD} directive, then +% all declarations need to have \var{OVERLOAD} specified. +parser_e_export_name_double=03008_E_Zduplikowana nazwa eksportu $1 +% Exported function names inside a specific DLL must all be different +parser_e_export_ordinal_double=03009_E_Zduplikowany indeks eksportowanej funkcji $1 +% Exported function names inside a specific DLL must all be different +parser_e_export_invalid_index=03010_E_Nieprawidowa warto indeksu funkcji +% DLL function index must be in the range \var{1..\$FFFF} +parser_w_parser_reloc_no_debug=03011_W_Informacje debugera w DLLu lub programie $1 nie dziaaj, wyczone. +parser_w_parser_win32_debug_needs_WN=03012_W_Aby mc debugowa kod win32 musisz wyczy generowanie kodu relokacji przecznikiem -WN +% Stabs info is wrong for relocatable DLL or EXES use -WN +% if you want to debug win32 executables. +parser_e_constructorname_must_be_init=03013_E_Konstruktor musi nazywa si INIT +% You are declaring a constructor with a name which isn't \var{init}, and the +% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). +parser_e_destructorname_must_be_done=03014_E_Destruktor musi nazywa si DONE +% You are declaring an object destructor with a name which is not \var{done}, and the +% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). +parser_e_proc_inline_not_supported=03016_E_Typ INLINE nieobsugiwany (uyj opcji -Si) +% You tried to compile a program with C++ style inlining, and forgot to +% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++ +% styled inlining by default. +parser_w_constructor_should_be_public=03018_W_Konstruktor powinien by publiczny +% Constructors must be in the 'public' part of an object (class) declaration. +parser_w_destructor_should_be_public=03019_W_Destruktor powinien by publiczny +% Destructors must be in the 'public' part of an object (class) declaration. +parser_n_only_one_destructor=03020_N_Klasa powinna mie tylko jeden destruktor +% You can declare only one destructor for a class. +parser_e_no_local_objects=03021_E_Definicje lokalne w klasie s niedozwolone +% Classes must be defined globally. They cannot be defined inside a +% procedure or function +parser_f_no_anonym_objects=03022_F_Definicje anonimowych klas s niedozwolone +% An invalid object (class) declaration was encountered, i.e. an +% object or class without methods that isn't derived from another object or +% class. For example: +% \begin{verbatim} +% Type o = object +% a : longint; +% end; +% \end{verbatim} +% will trigger this error. +parser_object_has_no_vmt=03023_E_Obiekt $1 nie posiada VMT +% This is a note indicating that the declared object has no +% virtual method table. +parser_e_illegal_parameter_list=03024_E_Nieprawidowa lista parametrw +% You are calling a function with parameters that are of a different type than +% the declared parameters of the function. +parser_e_wrong_parameter_size=03026_E_Nieprawidowa ilo parametrw +% There is an error in the parameter list of the function or procedure, +% the number of parameters is not correct. +parser_e_overloaded_no_procedure=03027_E_Przeciony identyfikator $1 nie jest funkcj +% The compiler encountered a symbol with the same name as an overloaded +% function, but it is not a function it can overload. +parser_e_overloaded_have_same_parameters=03028_E_Przeciona funkcja musi mie chocia jeden parametr wyrniajcy +% You're declaring overloaded functions, but with the same parameter list. +% Overloaded function must have at least 1 different parameter in their +% declaration. +parser_e_header_dont_match_forward=03029_E_Nagwek funkcji nie pasuje do deklaracji $1 +% You declared a function with same parameters but +% different result type or function modifiers. +parser_e_header_different_var_names=03030_E_Nagwek funkcji $1 nie pasuje : nazwy parametrw zmienione $2 => $3 +% You declared the function in the \var{interface} part, or with the +% \var{forward} directive, but define it with a different parameter list. +parser_n_duplicate_enum=03031_N_Cig wartoci typu wyliczeniowego musi by rosncy +% \fpc allows enumeration constructions as in C. Given the following +% declaration two declarations: +% \begin{verbatim} +% type a = (A_A,A_B,A_E:=6,A_UAS:=200); +% type a = (A_A,A_B,A_E:=6,A_UAS:=4); +% \end{verbatim} +% The second declaration would produce an error. \var{A\_UAS} needs to have a +% value higher than \var{A\_E}, i.e. at least 7. +parser_e_no_with_for_variable_in_other_segments=03033_E_With nie moe by uyte ze zmiennymi w innym segmencie +% With stores a variable locally on the stack, +% but this is not possible if the variable belongs to another segment. +parser_e_too_much_lexlevel=03034_E_Przekroczono limit zagniedenia funkcji +% You can nest function definitions only 31 times. +parser_e_range_check_error=03035_E_Bd zakresu podczas obliczania staej +% The constants are out of their allowed range. +parser_w_range_check_error=03036_W_Bd zakresu podczas obliczania staej +% The constants are out of their allowed range. +parser_e_double_caselabel=03037_E_Zduplikowana etykieta w instrukcji case +% You are specifying the same label 2 times in a \var{case} statement. +parser_e_case_lower_less_than_upper_bound=03038_E_Grna granica zakresu jest mniejsza od dolnej +% The upper bound of a \var{case} label is less than the lower bound and this +% is useless +parser_e_type_const_not_possible=03039_E_Staa typowana nie moe by klas ani obiektem +% You cannot declare a constant of type class or object. +parser_e_no_overloaded_procvars=03040_E_Do zmiennych proceduralnych nie mona przypisa przecionych funkcji +% You are trying to assign an overloaded function to a procedural variable. +% This isn't allowed. +parser_e_invalid_string_size=03041_E_Dugo stringa musi zawiera si midzy 1 a 255 +% The length of a shortstring in Pascal is limited to 255 characters. You are +% trying to declare a string with length lower than 1 or greater than 255 +parser_w_use_extended_syntax_for_objects=03042_W_Uyj rozszerzonej skadni NEW i DISPOSE dla obiektw +% If you have a pointer \var{a} to a class type, then the statement +% \var{new(a)} will not initialize the class (i.e. the constructor isn't +% called), although space will be allocated. you should issue the +% \var{new(a,init)} statement. This will allocate space, and call the +% constructor of the class. +parser_w_no_new_dispose_on_void_pointers=03043_W_Uycie NEW lub DISPOSE nie ma sensu dla nietypowanych wskanikw +parser_e_no_new_dispose_on_void_pointers=03044_E_Uycie NEW lub DISPOSE jest niemoliwe dla nietypowanych wskanikw +% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer +% because no size is associated to an untyped pointer. +% Accepted for compatibility in \var{tp} and \var{delphi} modes. +parser_e_class_id_expected=03045_E_Oczekiwano identyfikatora klasy +% This happens when the compiler scans a procedure declaration that contains +% a dot, +% i.e., a object or class method, but the type in front of the dot is not +% a known type. +parser_e_no_type_not_allowed_here=03046_E_Identyfikator typu jest niedozwolony w tym miejscu +% You cannot use a type inside an expression. +parser_e_methode_id_expected=03047_E_Oczekiwano identyfikatora metody +% This identifier is not a method. +% This happens when the compiler scans a procedure declaration that contains +% a dot, i.e., a object or class method, but the procedure name is not a +% procedure of this type. +parser_e_header_dont_match_any_member=03048_E_Nagwek funkcji nie pasuje do adnej metody tej klasy $1 +% This identifier is not a method. +% This happens when the compiler scans a procedure declaration that contains +% a dot, i.e., a object or class method, but the procedure name is not a +% procedure of this type. +parser_d_procedure_start=03049_DL_Procedura/Funkcja $1 +% When using the \var{-vp} switch, the compiler tells you when it starts +% processing a procedure or function implementation. +parser_e_error_in_real=03050_E_Nieprawidowa warto staej zmiennoprzecinkowej +% The compiler expects a floating point expression, and gets something else. +parser_e_fail_only_in_constructor=03051_E_FAIL moe by uyte tylko w konstruktorach +% You are using the \var{FAIL} instruction outside a constructor method. +parser_e_no_paras_for_destructor=03052_E_Destruktory nie mog mie parametrw +% You are declaring a destructor with a parameter list. Destructor methods +% cannot have parameters. +parser_e_only_class_methods_via_class_ref=03053_E_Tylko metody klasy mog by wywoywane w ten sposb +% This error occurs in a situation like the following: +% \begin{verbatim} +% Type : +% Tclass = Class of Tobject; +% +% Var C : TClass; +% +% begin +% ... +% C.free +% \end{verbatim} +% \var{Free} is not a class method and hence cannot be called with a class +% reference. +parser_e_only_class_methods=03054_E_W metodach klasy moesz uywa tylko metod klasy +% This is related to the previous error. You cannot call a method of an object +% from a inside a class method. The following code would produce this error: +% \begin{verbatim} +% class procedure tobject.x; +% +% begin +% free +% \end{verbatim} +% Because free is a normal method of a class it cannot be called from a class +% method. +parser_e_case_mismatch=03055_E_Staa i zmienna uyta w CASE nie s tego samego typu +% One of the labels is not of the same type as the case variable. +parser_e_illegal_symbol_exported=03056_E_Symbol nie moe by wyeksportowany +% You can only export procedures and functions when you write a library. You +% cannot export variables or constants. +parser_w_should_use_override=03057_W_Dziedziczona metoda jest ukryta przez $1 +% A method that is declared \var{virtual} in a parent class, should be +% overridden in the descendent class with the \var{override} directive. If you +% don't specify the \var{override} directive, you will hide the parent method; +% you will not override it. +parser_e_nothing_to_be_overridden=03058_E_Nie ma takiej metody w dziedziczonej klasie: $1 +% You are trying to \var{override} a virtual method of a parent class that does +% not exist. +parser_e_no_procedure_to_access_property=03059_E_Brak metody do odczytania wasnoci +% You specified no \var{read} directive for a property. +parser_w_stored_not_implemented=03060_W_Dyrektywa stored nie jest jeszcze zaimplementowana +% The \var{stored} directive is not yet implemented +parser_e_ill_property_access_sym=03061_E_Nieprawidowy symbol dla dostpu do wasnoci +% There is an error in the \var{read} or \var{write} directives for an array +% property. When you declare an array property, you can only access it with +% procedures and functions. The following code woud cause such an error. +% \begin{verbatim} +% tmyobject = class +% i : integer; +% property x [i : integer]: integer read I write i; +% \end{verbatim} +% +parser_e_cant_access_protected_member=03062_E_Nie mona si odwoywa do pola protected obiektu w tym miejscu +% Fields that are declared in a \var{protected} section of an object or class +% declaration cannot be accessed outside the module wher the object is +% defined, or outside descendent object methods. +parser_e_cant_access_private_member=03063_E_Nie mona si odwoywa do pola private obiektu w tym miejscu +% Fields that are declared in a \var{private} section of an object or class +% declaration cannot be accessed outside the module where the class is +% defined. +parser_e_overridden_methods_not_same_ret=03066_E_Przecione metody wirtualne powinny mie taki sam typ zwracanych wartoci: "$2" jest przecione przez "$" o innym zwracanym typie +% If you declare overridden methods in a class definition, they must +% have the same return type. +parser_e_dont_nest_export=03067_E_Eksportowane funkcje nie mog by zagniedone +% You cannot declare a function or procedure within a function or procedure +% that was declared as an export procedure. +parser_e_methods_dont_be_export=03068_E_Metody nie mog by eksportowane +% You cannot declare a procedure that is a method for an object as +% \var{export}ed. That is, your methods cannot be called from a C program. +parser_e_call_by_ref_without_typeconv=03069_E_Przy przekazywaniu przez referencj parametry musz by tego samego typu: Otrzymano $1, a oczekiwano $2 +% When calling a function declared with \var{var} parameters, the variables in +% the function call must be of exactly the same type. There is no automatic +% type conversion. +parser_e_no_super_class=03070_E_Ta klasa nie jest przodkiem biecej klasy +% When calling inherited methods, you are trying to call a method of a strange +% class. You can only call an inherited method of a parent class. +parser_e_self_not_in_method=03071_E_SELF jest dostpne tylko w metodach +% You are trying to use the \var{self} parameter outside an object's method. +% Only methods get passed the \var{self} parameters. +parser_e_generic_methods_only_in_methods=03072_E_Metody mog by wywoane bezporednio identyfikatorem typu klasy tylko w innych metodach +% A construction like \var{sometype.somemethod} is only allowed in a method. +parser_e_illegal_colon_qualifier=03073_E_Nieprawidowe uycie ':' +% You are using the format \var{:} (colon) 2 times on an expression that +% is not a real expression. +parser_e_illegal_set_expr=03074_E_Bd zakresu lub zduplikowany element w deklaracji zbioru +% The declaration of a set contains an error. Either one of the elements is +% outside the range of the set type, either two of the elements are in fact +% the same. +parser_e_pointer_to_class_expected=03075_E_Oczekiwano wskanika do obiektu +% You specified an illegal type in a \var{New} statement. +% The extended syntax of \var{new} needs an object as a parameter. +parser_e_expr_have_to_be_constructor_call=03076_E_Wyraenie musi by wywoaniem konstruktora +% When using the extended syntax of \var{new}, you must specify the constructor +% method of the object you are trying to create. The procedure you specified +% is not a constructor. +parser_e_expr_have_to_be_destructor_call=03077_E_Wyraenie musi by wywoaniem destruktora +% When using the extended syntax of \var{dispose}, you must specify the +% destructor method of the object you are trying to dispose of. +% The procedure you specified is not a destructor. +parser_e_invalid_record_const=03078_E_Nieprawidowa kolejno elementw rekordu +% When declaring a constant record, you specified the fields in the wrong +% order. +parser_e_false_with_expr=03079_E_Wyraenie musi by rekordem lub klas +% A \var{with} statement needs an argument that is of the type \var{record} +% or \var{class}. You are using \var{with} on an expression that is not of +% this type. +parser_e_void_function=03080_E_Procedury nie mog zwraca wartoci +% In \fpc, you can specify a return value for a function when using +% the \var{exit} statement. This error occurs when you try to do this with a +% procedure. Procedures cannot return a value. +parser_e_only_methods_allowed=03081_E_Konstruktory, destruktory i class operators musz by metodami +% You're declaring a procedure as destructor, constructor or class operator, when the +% procedure isn't a class method. +parser_e_operator_not_overloaded=03082_E_Operator nie jest przeciony +% You're trying to use an overloaded operator when it isn't overloaded for +% this type. +parser_e_no_such_assignment=03083_E_Nie moa przeciy przypisania dla takich samych typw +% You can not overload assignment for types +% that the compiler considers as equal. +parser_e_overload_impossible=03084_E_Niemoliwe przecienie operatora +% The combination of operator, arguments and return type are +% incompatible. +parser_e_no_reraise_possible=03085_E_Ponowne wywoanie wyjtku niemoliwe w tym miejscu +% You are trying to raise an exception where it isn't allowed. You can only +% raise exceptions in an \var{except} block. +parser_e_no_new_or_dispose_for_classes=03086_E_Rozszerzona skadnia new i dispose jest niedozwolona dla klas +% You cannot generate an instance of a class with the extended syntax of +% \var{new}. The constructor must be used for that. For the same reason, you +% cannot call \var{Dispose} to de-allocate an instance of a class, the +% destructor must be used for that. +parser_e_procedure_overloading_is_off=03088_E_Przecianie procedur jest wyczone +% When using the \var{-So} switch, procedure overloading is switched off. +% Turbo Pascal does not support function overloading. +parser_e_overload_operator_failed=03089_E_Przecienie tego operatora jest niemoliwe +% You are trying to overload an operator which cannot be overloaded. +% The following operators can be overloaded : +% \begin{verbatim} +% +, -, *, /, =, >, <, <=, >=, is, as, in, **, := +% \end{verbatim} +parser_e_comparative_operator_return_boolean=03090_E_Operator porwnania musi zwraca warto typu Boolean +% When overloading the \var{=} operator, the function must return a boolean +% value. +parser_e_only_virtual_methods_abstract=03091_E_Tylko metody wirtualne mog by abstrakcyjne +% You are declaring a method as abstract, when it isn't declared to be +% virtual. +parser_f_unsupported_feature=03092_F_Uycie nieobsugiwanej funkcji kompilatora! +% You're trying to force the compiler into doing something it cannot do yet. +parser_e_mix_of_classes_and_objects=03093_E_Mieszanie rnych typw obiektw (obiektw, klas, interfejsw) jest niedozwolone +% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} interttwined . E.g. +% a class cannot have an object as parent and vice versa. +parser_w_unknown_proc_directive_ignored=03094_W_Nieznana dyrektywa procedury zostaa zignorowana: $1 +% The procedure directive you specified is unknown. +parser_e_absolute_only_one_var=03095_E_Absolute moe by powizane tylko z jedn zmienn +% You cannot specify more than one variable before the \var{absolute} directive. +% Thus, the following construct will provide this error: +% \begin{verbatim} +% Var Z : Longint; +% X,Y : Longint absolute Z; +% \end{verbatim} +% \item [ absolute can only be associated a var or const ] +% The address of a \var{absolute} directive can only point to a variable or a +% typed constant. Therefore, the following code will produce this error: +% \begin{verbatim} +% Procedure X; +% +% var p : longint absolute x; +% \end{verbatim} +% +parser_e_absolute_only_to_var_or_const=03096_E_Absolute moe by uyte tylko w stosunku do zmiennej lub staej +% The address of a \var{absolute} directive can only point to a variable or +% constant. Therefore, the following code will produce this error: +% \begin{verbatim} +% Procedure X; +% +% var p : longint absolute x; +% \end{verbatim} +% +parser_e_initialized_only_one_var=03097_E_Tylko jedna zmienna moe by zainicjowana +% You cannot specify more than one variable with a initial value +% in Delphi mode. +parser_e_abstract_no_definition=03098_E_Metody abstrakcyjne nie mog by zaimplementowane +% Abstract methods can only be declared, you cannot implement them. They +% should be overridden by a descendant class. +parser_e_overloaded_must_be_all_global=03099_E_Ta przeciona funkcja nie moe by lokalna (musi by wyeksportowana) +% You are defining a overloaded function in the implementation part of a unit, +% but there is no corresponding declaration in the interface part of the unit. +parser_w_virtual_without_constructor=03100_W_Metody wirtualne uyte bez konstruktora $1 +% If you declare objects or classes that contain virtual methods, you need +% to have a constructor and destructor to initialize them. The compiler +% encountered an object or class with virtual methods that doesn't have +% a constructor/destructor pair. +parser_c_macro_defined=03101_CL_Makro zdefiniowane: $1 +% When \var{-vm} is used, the compiler tells you when it defines macros. +parser_c_macro_undefined=03102_CL_Makro wymazane: $1 +% When \var{-vm} is used, the compiler tells you when it undefines macros. +parser_c_macro_set_to=03103_CL_Makro $1 ustawione na $2 +% When \var{-vm} is used, the compiler tells you what values macros get. +parser_i_compiling=03104_I_Kompilowanie $1 +% When you turn on information messages (\var{-vi}), the compiler tells you +% what units it is recompiling. +parser_u_parsing_interface=03105_UL_Parsowanie czci interface moduu $1 +% This tells you that the reading of the interface +% of the current unit starts +parser_u_parsing_implementation=03106_UL_Parsowanie czci implementation moduu $1 +% This tells you that the code reading of the implementation +% of the current unit, library or program starts +parser_d_compiling_second_time=03107_DL_Kompilowanie $1 po raz drugi +% When you request debug messages (\var{-vd}) the compiler tells you what +% units it recompiles for the second time. +parser_e_no_property_found_to_override=03109_E_Nie znaleziono wasnoci do przecienia +% You want to overrride a property of a parent class, when there is, in fact, +% no such property in the parent class. +parser_e_only_one_default_property=03110_E_Dozwolona jest tylko jedna wasno domylna, a znaleziono odziedziczon wasno domyln $1 +% You specified a property as \var{Default}, but a parent class already has a +% default property, and a class can have only one default property. +parser_e_property_need_paras=03111_E_Wasnoci domyln musi by tablica +% Only array properties of classes can be made \var{default} properties. +parser_e_constructor_cannot_be_not_virtual=03112_E_Wirtualne konstruktory s dostpne tylko w klasach +% You cannot have virtual constructors in objects. You can only have them +% in classes. +parser_e_no_default_property_available=03113_E_Brak domylnej wasnoci w tej klasie +% You are trying to access a default property of a class, but this class (or one of +% its ancestors) doesn't have a default property. +parser_e_cant_have_published=03114_E_Klasa nie moe mie sekcji published, uyj przecznika {$M+} +% If you want a \var{published} section in a class definition, you must +% use the \var{\{\$M+\}} switch, whch turns on generation of type +% information. +parser_e_forward_declaration_must_be_resolved=03115_E_Deklaracja naprzd klasy $1 musi by rozwizana, aby uy klasy jako przodka innej klasy +% To be able to use an object as an ancestor object, it must be defined +% first. This error occurs in the following situation: +% \begin{verbatim} +% Type ParentClas = Class; +% ChildClass = Class(ParentClass) +% ... +% end; +% \end{verbatim} +% Where \var{ParentClass} is declared but not defined. +parser_e_no_local_operator=03116_E_Lokalne przecienia operatorw niedostpne +% You cannot overload locally, i.e. inside procedures or function +% definitions. +parser_e_proc_dir_not_allowed_in_interface=03117_E_Dyrektywa $1 niedozwolona w sekcji interface +% This procedure directive is not allowed in the \var{interface} section of +% a unit. You can only use it in the \var{implementation} section. +parser_e_proc_dir_not_allowed_in_implementation=03118_E_Dyrektywa $1 niedozwolona w sekcji implementation +% This procedure directive is not defined in the \var{implementation} section of +% a unit. You can only use it in the \var{interface} section. +parser_e_proc_dir_not_allowed_in_procvar=03119_E_Dyrektywa $1 niedozwolona w deklaracji typu proceduralnego +% This procedure directive cannot be part of a procedural or function +% type declaration. +parser_e_function_already_declared_public_forward=03120_E_Funkcja jest ju zadeklarowana jako Public/Forward $1 +% You will get this error if a function is defined as \var{forward} twice. +% Or it is once in the \var{interface} section, and once as a \var{forward} +% declaration in the \var{implmentation} section. +parser_e_not_external_and_export=03121_E_Nie mona uy jednoczenie EXPORT i EXTERNAL +% These two procedure directives are mutually exclusive +parser_w_not_supported_for_inline=03123_W_$1 nieobsugiwane w procedurze/funkcji inline +% Inline procedures don't support this declaration. +parser_w_inlining_disabled=03124_W_Inline wyczone +% Inlining of procedures is disabled. +parser_i_writing_browser_log=03125_I_Zapisywanie logu przegldarki $1 +% When information messages are on, the compiler warns you when it +% writes the browser log (generated with the \var{\{\$Y+ \}} switch). +parser_h_maybe_deref_caret_missing=03126_H_Moliwe, e brakuje dereferencji wskanika +% The compiler thinks that a pointer may need a dereference. +parser_f_assembler_reader_not_supported=03127_F_Wybrany tryb asemblera nie jest obsugiwany +% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not +% supported. The compiler can be compiled with or without support for a +% particular assembler reader. +parser_e_proc_dir_conflict=03128_E_Dyrektywa $1 koliduje z innymi dyrektywami +% You specified a procedure directive that conflicts with other directives. +% for instance \var{cdecl} and \var{pascal} are mutually exclusive. +parser_e_call_convention_dont_match_forward=03129_E_Konwencja wywoywania musi by taka sama w czsci interface i implementation +% This error happens when you declare a function or procedure with +% e.g. \var{cdecl;} but omit this directive in the implementation, or vice +% versa. The calling convention is part of the function declaration, and +% must be repeated in the function definition. +parser_e_property_cant_have_a_default_value=03131_E_Ta wasno nie moe mie domylnej wartoci +% Set properties or indexed properties cannot have a default value. +parser_e_property_default_value_must_const=03132_E_Domylna warto wasnoci musi by sta +% The value of a \var{default} declared property must be known at compile +% time. The value you specified is only known at run time. This happens +% .e.g. if you specify a variable name as a default value. +parser_e_cant_publish_that=03133_E_Symbol nie moe by w sekcji published +% Only class type variables can be in a \var{published} section of a class +% if they are not declared as a property. +parser_e_cant_publish_that_property=03134_E_Ten typ wartoci nie moe by w sekcji published +% Properties in a \var{published} section cannot be array properties. +% they must be moved to public sections. Properties in a \var{published} +% section must be an ordinal type, a real type, strings or sets. +parser_e_empty_import_name=03136_W_Wymagana jest nazwa importu +% Some targets need a name for the imported procedure or a \var{cdecl} specifier +parser_e_division_by_zero=03138_E_Dzielenie przez zero +% There is a divsion by zero encounted +parser_e_invalid_float_operation=03139_E_Nieprawidowa operacja zmiennoprzecinkowa +% An operation on two real type values produced an overflow or a division +% by zero. +parser_e_array_lower_less_than_upper_bound=03140_E_Grna granica zakresu jest mniejsza od dolnej +% The upper bound of a an array declaration is less than the lower bound and this +% is not possible +parser_w_string_too_long=03141_W_String "$1" jest duszy ni $2 +% The size of the constant string is larger than the size you specified in +% string type definition +parser_e_string_larger_array=03142_E_Dugo stringa jest wiksza ni dugo tablicy znakw +% The size of the constant string is larger than the size you specified in +% the array[x..y] of char definition +parser_e_ill_msg_expr=03143_E_Nieprawidowe wyraenie przy dyrektywie message +% \fpc supports only integer or string values as message constants +parser_e_ill_msg_param=03144_E_Funkcje obsugujce komunikaty (message) mog pobiera tylko jeden parametr przez referencj +% A method declared with the \var{message}-directive as message handler +% can take only one parameter which must be declared as call by reference +% Parameters are declared as call by reference using the \var{var}-directive +parser_e_duplicate_message_label=03145_E_Zduplikowana etykieta komunikatu: $1 +% A label for a message is used twice in one object/class +parser_e_self_in_non_message_handler=03146_E_Self moe by parametrem tylko metod obsugujcych komunikaty +% The self parameter can only be passed explicitly to a method which +% is declared as message handler. +parser_e_threadvars_only_sg=03147_E_Zmienne threadvar mog by tylko statyczne lub globalne +% Threadvars must be static or global, you can't declare a thread +% local to a procedure. Local variables are always local to a thread, +% because every thread has its own stack and local variables +% are stored on the stack +parser_f_direct_assembler_not_allowed=03148_F_Wstawki asemblera niedostpne gdy wyjciowym formatem jest wbudowane zapisywanie binarne +% You can't use direct assembler when using a binary writer, choose an +% other outputformat or use another assembler reader +parser_w_no_objpas_use_mode=03149_W_Nie aduj moduu OBJPAS bezporednio - uyj trybu obiektowego (objfpc, delphi) +% You are trying to load the ObjPas unit manually from a uses clause. This is +% not a good idea. Use the \var{\{\$mode objfpc\}} or +% \var{\{\$mode delphi\}} +% directives which load the unit automatically +parser_e_no_object_override=03150_E_OVERRIDE nie moe by uyte dla obiektw +% Override is not supported for objects, use \var{virtual} instead to override +% a method of a parent object +parser_e_cant_use_inittable_here=03151_E_Typy danych wymagajce inicjalizacji/finalizcji nie mog by uyte w rekordach z wariantami +% Some data type (e.g. \var{ansistring}) needs initialization/finalization +% code which is implicitly generated by the compiler. Such data types +% can't be used in the variant part of a record. +parser_e_resourcestring_only_sg=03152_E_Resourcestring moe by tylko statyczny lub globalny +% Resourcestring can not be declared local, only global or using the static +% directive. +parser_e_exit_with_argument_not__possible=03153_E_Exit z argumentem nie moe by tu uyte +% an exit statement with an argument for the return value can't be used here, this +% can happen e.g. in \var{try..except} or \var{try..finally} blocks +parser_e_stored_property_must_be_boolean=03154_E_Symbol przechowywania wasnoci musi by typu boolean +% If you specify a storage symbol in a property declaration, it must be of +% the type boolean +parser_e_ill_property_storage_sym=03155_E_Ten symbol nie moe by symbolem przechowywania wasnoci +% You can't use this type of symbol as storage specifier in property +% declaration. You can use only methods with the result type boolean, +% boolean class fields or boolean constants +parser_e_only_publishable_classes_can__be_published=03156_E_Tylko klasy skompilowane w trybie $M+ mog by w sekcji published +% In the published section of a class can be only class as fields used which +% are compiled in \var{\{\$M+\}} or which are derived from such a class. Normally +% such a class should be derived from TPersitent +parser_e_proc_directive_expected=03157_E_Oczekiwano dyrektywy procedury +% When declaring a procedure in a const block you used a ; after the +% procedure declaration after which a procedure directive must follow. +% Correct declarations are: +% \begin{verbatim} +% const +% p : procedure;stdcall=nil; +% p : procedure stdcall=nil; +% \end{verbatim} +parser_e_invalid_property_index_value=03158_E_Warto indeksu wasnoci musi by typu porzdkowego +% The value you use to index a property must be of an ordinal type, for +% example an integer or enumerated type. +parser_e_procname_to_short_for_export=03159_E_Zbyt krtka nazwa procedury, aby eksportowa +% The length of the procedure/function name must be at least 2 characters +% long. This is because of a bug in dlltool which doesn't parse the .def +% file correct with a name of length 1. +parser_e_dlltool_unit_var_problem=03160_E_Nie mona wygenerowa pozycji DEFFILE dla zmiennych globalnych moduu +parser_e_dlltool_unit_var_problem2=03161_E_Skompiluj bez opcji -WD +% You need to compile this file without the -WD switch on the +% commandline +parser_f_need_objfpc_or_delphi_mode=03162_F_Aby skompilowa ten modu wymagany jest tryb ObjFpc (-S2) lub Delphi (-Sd) +% You need to use {$mode objfpc} or {$mode delphi} to compile this file. +% Or use the equivalent commandline switches -S2 or -Sd. +parser_e_no_export_with_index_for_target=03163_E_Nie mona wyeksportowa z indeksem pod $1 +% Exporting of functions or procedures with a specified index is not +% supported on this target. +parser_e_no_export_of_variables_for_target=03164_E_Nie mona wyeksportowa zmiennych pod $1 +% Exporting of variables is not supported on this target. +parser_e_improper_guid_syntax=03165_E_Nieprawidowa skadnia identyfikatora GUID +parser_w_interface_mapping_notfound=03168_W_Nie znaleziono procedury "$1", ktra mogaby implementowa $2.$3 +parser_e_interface_id_expected=03169_E_Oczekiwano interfejsu +% This happens when the compiler scans a \var{class} declaration that contains +% \var{interface} function name mapping code like this: +% \begin{verbatim} +% type +% TMyObject = class(TObject, IDispatch) +% function IUnknown.QueryInterface=MyQueryInterface; +% .... +% \end{verbatim} +% and the \var{interface} before the dot not listed in the inheritance list. +parser_e_type_cant_be_used_in_array_index=03170_E_Typ "$1" nie moe by uyty jako indeks tablicy +% Types like \var{qword} or \var{int64} aren't allowed as array index type +parser_e_no_con_des_in_interfaces=03171_E_Konstruktory i destruktory s niedozwolone w interfejsach +% Constructor and destructor declarations aren't allowed in interface +% In the most cases the method \var{QueryInterface} of \var{IUnknown} can +% be used to create a new interface. +parser_e_no_access_specifier_in_interfaces=03172_E_Okrelenia dostpu nie mog by uyte w interfejsach +% The access specifiers \var{public}, \var{private}, \var{protected} and +% \var{pusblished} can't be used in interfaces because all methods +% of an interfaces must be public. +parser_e_no_vars_in_interfaces=03173_E_Interfejs nie moe posiada pl +% Declarations of fields aren't allowed in interfaces. An interface +% can contain only methods +parser_e_no_local_external=03174_E_Lokalne procedury nie mog by zadeklarowane jako EXTERNAL +% Declaring local procedures as external is not possible. Local procedures +% get hidden parameters that will make the chance of errors very high +parser_w_skipped_fields_before=03175_W_Niektre pola przed "$1" nie zostay zainicjalizowane +% In Delphi mode, not all fields of a typed constant record have to be +% initialized, but the compiler warns you when it detects such situations. +parser_e_skipped_fields_before=03176_E_Niektre pola przed "$1" nie zostay zainicjalizowane +% In all syntax modes but Delphi mode, you can't leave some fields uninitialized +% in the middle of a typed constant record +parser_w_skipped_fields_after=03177_W_Niektre pola po "$1" nie zostay zainicjalizowane +% You can leave some fields at the end of a type constant record uninitialized +% (the compiler will initialize them to zero automatically). This may be the cause +% of subtle problems. +parser_e_varargs_need_cdecl_and_external=03178_E_Dyrektywa VarArgs bez CDecl i External +% The varargs directive can only be used with procedures or functions +% that are declared with \var{cdecl} and \var{external} directives. The varargs directive +% is only meant to provide a compatible interface to C functions like printf. +parser_e_self_call_by_value=03179_E_Self musi by normalnym parametrem (przekazywanym przez warto) +% You can't declare self as a const or var parameter, it must always be +% a call-by-value parameter +parser_e_interface_has_no_guid=03180_E_Interfejs "$1" nie posiada identyfikatora GUID +% When you want to assign an interface to a constant, then the interface +% must have a GUID value set. +parser_e_illegal_field_or_method=03181_E_Nieznana metoda albo pole klasy "$1" +% Properties must refer to a field or method in the same class. +parser_w_proc_overriding_calling=03182_W_Zmiana sposobu wywoywania z "$1" na "$2" +% There are two directives in the procedure declaration that specify a calling +% convention. Only the last directive will be used +parser_e_no_procvarobj_const=03183_E_Typowane stae typu "procedure of object" mog by inicjowane tylko NILem +% You can't assign the address of a method to a typed constant which has a +% 'procedure of object' type, because such a constant requires two addresses: +% that of the method (which is known at compile time) and that of the object or +% class instance it operates on (which can not be known at compile time). +parser_e_default_value_only_one_para=03184_E_Domylna warto moe by przypisana tylko jednemu parametrowi +parser_e_default_value_expected_for_para=03185_E_Domylna warto wymagana dla "$1" +parser_w_unsupported_feature=03186_W_Uycie (jeszcze) nieobsugiwanej funkcji kompilatora! +% You're trying to force the compiler into doing something it cannot do yet. +parser_h_c_arrays_are_references=03187_H_Tablice C s przekazywane przez referencj +% Any array passed to a C functions is passed +% by a pointer (i.e. by reference). +parser_e_C_array_of_const_must_be_last=03188_E_Tablica staych musi by ostatnim argumentem +% You can not add any other argument after an \var{array of const} for +% \var{cdecl} functions, as the size pushed on stack for this argument is +% not known. +parser_h_type_redef=03189_H_Powtrna definicja typu "$1" +% This is an indicator that a previously declared type is +% being redefined as something else. This may, or may not +% be, a cause for errors. +parser_w_cdecl_has_no_high=03190_W_Funkcje cdecl nie maj parametru high +% Functions declared with cdecl modifier do not pass an extra implicit parameter. +parser_w_cdecl_no_openstring=03191_W_Funkcje cdecl nie obsuguj open strings +%Openstring is not supported for cdecl'ared functions. +parser_e_initialized_not_for_threadvar=03192_E_Nie mona zainicjalizowa zmiennych zadeklarowanych jako threadvar +% Variables declared as threadvar can not be initialized with a default value. +% The variables will always be filled with zero at the start of a new thread. +parser_e_msg_only_for_classes=03193_E_Dyrektywa Message jest dozwolona tylko w klasach +% The message directive is only supported for Class types. +parser_e_procedure_or_function_expected=03194_E_Oczekiwano procedury lub funkcji +% A class method can only be specified for procedures and functions. +parser_e_illegal_calling_convention=03195_W_Dyrektywa "$1" zignorowana +% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support +% only the standard ABI calling convention of the CPU. +parser_e_no_object_reintroduce=03196_E_Nie mona uy REINTRODUCE dla obiektw +% \var{reintroduce} is not supported for objects. +parser_e_paraloc_only_one_para=03197_E_Kady argument musi posiada swoj pozycj +% If locations for arguments are specified explicitly as it is required by +% some syscall conventions, each argument must have it's only location, things +% like \var{procedure p(i,j : longint 'r1');} aren't allowed +parser_e_paraloc_all_paras=03198_E_Kady argument musi posiada swoj pozycj +% If one argument has an explicit argument location, all arguments of a procedure +% must have one. +parser_e_illegal_explicit_paraloc=03199_E_Nieznana pozycja argumentu +% The location specified for an argument isn't recognized by the compiler +parser_e_32bitint_or_pointer_variable_expected=03200_E_Oczekiwano 32 bitowej liczby typu Integer albo wskanika +% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable. +parser_e_goto_outside_proc=03201_E_Nie mona uy instrukcji GOTO pomidzy procedurami +% It isn't allowed to use the \var{goto} statements referencing labels outside the +% current procedure. The following example shows the problem: +% \begin{verbatim} +% ... +% procedure p1; +% label +% l1; +% +% procedure p2; +% begin +% goto l1; // This goto ISN'T allowed +% end; +% +% begin +% p2 +% l1: +% end; +% ... +% +% \end{verbatim} +parser_f_too_complex_proc=03202_F_Zbyt rozbudowana procedura, sprbuj rozbi j na mniejsze +% Your procedure body is too long for the compiler. You should split the +% procedure into multiple smaller procedures. +parser_e_illegal_expression=03203_E_Nieprawidowe wyraenie +% This can occur under many circumstances. Mostly when trying to evaluate +% constant expressions. +parser_e_invalid_integer=03204_E_Nieprawidowe wyraenie (powinno zwci liczb cakowit) +% You made an expression which isn't an integer, and the compiler expects the +% result to be an integer. +parser_e_invalid_qualifier=03205_E_Nieprawidowy kwalifikator +% One of the following is happening : +% \begin{itemize} +% \item You're trying to access a field of a variable that is not a record. +% \item You're indexing a variable that is not an array. +% \item You're dereferencing a variable that is not a pointer. +% \end{itemize} +parser_e_upper_lower_than_lower=03206_E_Grna granica zakresu jest mniejsza od dolnej +% You are declaring a subrange, and the lower limit is higher than the high +% limit of the range. +parser_e_macpas_exit_wrong_param=03207_E_Parametr funkcji EXIT musi by nazw procedury, w ktrej jej uyto +% Non local exit is not allowed. This error occurs only in mode MacPas. +parser_e_illegal_assignment_to_count_var=03208_E_Nieprawidowe przypisanie do licznika ptli "$1" +% The type of a \var{for} loop variable must be an ordinal type. +% Loop variables cannot be reals or strings. +parser_e_no_local_var_external=03209_E_Lokalne zmienne nie mog by zadeklarowane jako EXTERNAL +% Declaring local variables as external is not allowed. Only global variables can reference +% to external variables. +parser_e_proc_already_external=03210_E_Procedura ju zadeklarowana jako EXTERNAL +% The procedure is already declared with the EXTERNAL directive in an interface or +% forward declaration. +parser_w_implicit_uses_of_variants_unit=03211_W_Dopisanie moduu Variants do sekcji uses +% The Variant type is used in the unit without any used unit using the Variants unit. The +% compiler has implicitly added the Variants unit to the uses list. To remove this warning +% the Variants unit needs to be added to the uses statement. +parser_e_no_static_method_in_interfaces=03212_E_Metody statyczne nie mog by uyte w interfejsach +% The specifier \var{class} and directive \var{static} can't be used in interfaces +% because all methods of an interfaces must be public. +parser_e_arithmetic_operation_overflow=03213_E_Wystpio przepenienie w operacji arytmetycznej +% An operation on two integers values produced an overflow +parser_e_protected_or_private_expected=03214_E_Oczekiwano "protected" albo "private" +% \var{strict} can be only used together with \var{protected} or \var{private}. +% \end{description} +# +# Type Checking +# +# 04049 is the last one used +# +% \section{Type checking errors} +% This section lists all errors that can occur when type checking is +% performed. +% \begin{description} +type_e_mismatch=04000_E_Nieprawidowy typ +% This can happen in many cases: +% \begin{itemize} +% \item The variable you're assigning to is of a different type than the +% expression in the assignment. +% \item You are calling a function or procedure with parameters that are +% incompatible with the parameters in the function or procedure definition. +% \end{itemize} +type_e_incompatible_types=04001_E_Niezgodno typw: otrzymano "$1" oczekiwano "$2" +% There is no conversion possible between the two types +% Another possiblity is that they are declared in different +% declarations: +% \begin{verbatim} +% Var +% A1 : Array[1..10] Of Integer; +% A2 : Array[1..10] Of Integer; +% +% Begin +% A1:=A2; { This statement gives also this error, it +% is due the strict type checking of pascal } +% End. +% \end{verbatim} +type_e_not_equal_types=04002_E_Niezgodno typw pomidzy $1 i $2 +% The types are not equal +type_e_type_id_expected=04003_E_Oczekiwano identyfikatora typu +% The identifier is not a type, or you forgot to supply a type identifier. +type_e_variable_id_expected=04004_E_Oczekiwano identyfikatora zmiennej +% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec}) +% when it expects a variable. You can only pass variables as arguments to these functions. +type_e_integer_expr_expected=04005_E_Oczekiwano wyraenia cakowitego, ale otrzymano "$1" +% The compiler expects an expression of type integer, but gets a different +% type. +type_e_boolean_expr_expected=04006_E_Oczekiwano wyraenia logicznego, ale otrzymano "$1" +% The expression must be a boolean type, it should be return true or +% false. +type_e_ordinal_expr_expected=04007_E_Oczekiwano wyraenia porzdkowego +% The expression must be of ordinal type, i.e., maximum a \var{Longint}. +% This happens, for instance, when you specify a second argument +% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value. +type_e_pointer_type_expected=04008_E_Oczekiwano wskanika, ale otrzymano "$1" +% The variable or expression isn't of the type \var{pointer}. This +% happens when you pass a variable that isn't a pointer to \var{New} +% or \var{Dispose}. +type_e_class_type_expected=04009_E_Oczekiwano klasy, ale otrzymano "$1" +% The variable of expression isn't of the type \var{class}. This happens +% typically when +% \begin{enumerate} +% \item The parent class in a class declaration isn't a class. +% \item An exception handler (\var{On}) contains a type identifier that +% isn't a class. +% \end{enumerate} +type_e_cant_eval_constant_expr=04011_E_Nie mona obliczy wartoci wyraenia +% This error can occur when the bounds of an array you declared does +% not evaluate to ordinal constants +type_e_set_element_are_not_comp=04012_E_Niekompatybilne elementy zbioru +% You are trying to make an operation on two sets, when the set element types +% are not the same. The base type of a set must be the same when taking the +% union +type_e_set_operation_unknown=04013_E_Operacja niezaimplementowana dla zbioru +% several binary operations are not defined for sets +% like div mod ** (also >= <= for now) +type_w_convert_real_2_comp=04014_W_Konwersja typu zmiennoprzecinkowego do cakowitego typu COMP +% An implicit type conversion from a real type to a \var{comp} is +% encountered. Since \var{Comp} is a 64 bit integer type, this may indicate +% an error. +type_h_use_div_for_int=04015_H_Uyj DIV zamiast '/' aby wynik by cakowity +% When hints are on, then an integer division with the '/' operator will +% procuce this message, because the result will then be of type real +type_e_strict_var_string_violation=04016_E_Typy stringw nie pasuj z powodu trybu $V+ +% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter +% should be of the exact same type as the declared parameter of the procedure. +type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_Succ i Pred nie dziaaj dla wylicze z przypisaniami +% When you declared an enumeration type which has assignments in it, as in C, +% like in the following: +% \begin{verbatim} +% Tenum = (a,b,e:=5); +% \end{verbatim} +% you cannot use the \var{Succ} or \var{Pred} functions on them. +type_e_cant_read_write_type=04018_E_Nie mona zapisa lub odczyta zmiennych tego typu +% You are trying to \var{read} or \var{write} a variable from or to a +% file of type text, which doesn't support that. Only integer types, +% reals, pchars and strings can be read from/written to a text file. +% Booleans can only be written to text files. +type_e_no_readln_writeln_for_typed_file=04019_E_Nie mona uy readln ani writeln na pliku tego typu +% \var{readln} and \var{writeln} are only allowed for text files. +type_e_no_read_write_for_untyped_file=04020_E_Nie mona uy readln ani writeln na nietypowanym pliku +% \var{read} and \var{write} are only allowed for text or typed files. +type_e_typeconflict_in_set=04021_E_Konflikt typw pomidzy elementami zbioru +% There is at least one set element which is of the wrong type, i.e. not of +% the set type. +type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) zwraca starsze/modsze sowo/podwjne sowo +% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword} +% which returns the lower/upper word/dword of the argument. TP always uses +% a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the +% bits 8..15 for \var{hi}. If you want the TP behavior you have +% to type cast the argument to \var{word/integer} +type_e_integer_or_real_expr_expected=04023_E_Oczekiwano wyraenia cakowitego lub zmiennoprzecinkowego +% The first argument to \var{str} must a real or integer type. +type_e_wrong_type_in_array_constructor=04024_E_Nieprawidowy typ $1 w konstruktorze tablicy +% You are trying to use a type in an array constructor which is not +% allowed. +type_e_wrong_parameter_type=04025_E_Nieprawidowy typ parametru nr $1: Otrzymano $2, a oczekiwano $3 +% You are trying to pass an invalid type for the specified parameter. +type_e_no_method_and_procedure_not_compatible=04026_E_Metoda i Procedura nie s zgodne (jako zmienne) +% You can't assign a method to a procedure variable or a procedure to a +% method pointer. +type_e_wrong_math_argument=04027_E_Nieprawidowa staa przekazana do wbudowanej funkcji matematycznej +% The constant argument passed to a ln or sqrt function is out of +% the definition range of these functions. +type_e_no_addr_of_constant=04028_E_Nie mona pobra adresu staej +% It's not possible to get the address of a constant, because they +% aren't stored in memory, you can try making it a typed constant. +type_e_argument_cant_be_assigned=04029_E_Ten argument nie moe by przekazany przez referencj +% Only expressions which can be on the left side of an +% assignment can be passed as call by reference argument +% Remark: Properties can be only +% used on the left side of an assignment, but they can't be used as arguments +type_e_cannot_local_proc_to_procvar=04030_E_Nie mona przypisa lokalnej procedury/funkcji do zmiennej proceduralnej +% It's not allowed to assign a local procedure/function to a +% procedure variable, because the calling of local procedure/function is +% different. You can only assign local procedure/function to a void pointer. +type_e_no_assign_to_addr=04031_E_Nie mona przypisa wartoci adresowi +% It is not allowed to assign a value to an address of a variable, constant, +% procedure or function. You can try compiling with -So if the identifier +% is a procedure variable. +type_e_no_assign_to_const=04032_E_Nie mona staej przypisa wartoci +% It's not allowed to assign a value to a variable which is declared +% as a const. This is normally a parameter declared as const, to allow +% changing the value make the parameter as a value parameter or a var. +type_e_array_required=04033_E_Dozwolone tylko dla tablic +% If you are accessing a variable using an index '[<x>]' then +% the type must be an array. In FPC mode also a pointer is allowed. +type_e_interface_type_expected=04034_E_Oczekiwano interfejsu ale otrzymano "$1" +type_w_mixed_signed_unsigned=04035_W_Uywanie zmiennych typu Cardinal w wyraeniach ze znakiem daje 64bitowy wynik +% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa), +% or if you have overflow and/or range checking turned on and use an arithmetical +% expression (+, -, *, div, mod) in which both signed numbers and longwords appear, +% then everything has to be evaluated in 64bit which is slower than normal +% 32bit arithmetic. You can avoid this by typecasting one operand so it +% matches the result type of the other one. +type_w_mixed_signed_unsigned2=04036_W_Uywanie zmiennych typu Cardinal w wyraeniach ze znakiem moe spowodowa bd zakresu w tym miejscu +% If you use a binary operator (and, or, xor) and one of +% the operands is a cardinal while the other one is a signed expression, then, +% if range checking is turned on, you may get a range check error because in +% such a case both operands are converted to cardinal before the operation is +% carried out. You can avoid this by typecasting one operand so it +% matches the result type of the other one. +type_e_typecast_wrong_size_for_assignment=04037_E_Rzutowanie typw rnych rozmiarw ($1 -> $2) w przypisaniu +% Type casting to a type with a different size is not allowed when the variable is +% used for assigning. +type_e_array_index_enums_with_assign_not_possible=04038_E_Typ wyliczeniowy z przypisanymi wartociami nie moze by uyty do ideksowania tablicy +% When you declared an enumeration type which has assignments in it, as in C, +% like in the following: +% \begin{verbatim} +% Tenum = (a,b,e:=5); +% \end{verbatim} +% you cannot use it as index of an array. +type_e_classes_not_related=04039_E_Typy obiektowe "$1" i "$2" nie s pokrewne +% There is a typecast from one class or object to another while the class/object +% are not related. This will probably lead to errors +type_w_classes_not_related=04040_W_Typy obiektowe "$1" i "$2" nie s pokrewne +% There is a typecast from one class or object to another while the class/object +% are not related. This will probably lead to errors +type_e_class_or_interface_type_expected=04041_E_Oczekiwano klasy lub interfejsu ale otrzymano "$1" +type_e_type_is_not_completly_defined=04042_E_Typ "$1" nie jest kompletnie zdefiniowany +type_w_string_too_long=04043_W_Przekroczona maksymalna dugo acucha +% The size of the constant string, which is assigned to a shortstring, +% is longer than the maximum size of the shortstring +type_w_signed_unsigned_always_false=04044_W_To porwnanie zawsze zwraca fasz z powodu zakresw wartoci zmiennych +% There is a comparison between an unsigned value and a signed constant which is +% less than zero. Because of type promotion, the statement will always evaluate to +% false. Exlicitly typecast the constant to the correct range to avoid this problem. +type_w_signed_unsigned_always_true=04045_W_To porwnanie zawsze zwraca fasz z powodu zakresw wartoci zmiennych +% There is a comparison between an unsigned value and a signed constant which is +% less than zero. Because of type promotion, the statement will always evaluate to +% true. Exlicitly typecast the constant to the correct range to avoid this problem. +type_w_instance_with_abstract=04046_W_Tworzenie klasy "$1" posiadajcej metody abstrakcyjne +% An instance of a class is created which contains non-implemented abstract +% methods. This will probably lead to a runtime error 211 in the code if that +% routine is ever called. All abstract methods should be overridden. +type_h_in_range_check=04047_H_Lewy operand operatora IN powinien by wielkoci jednego bajta +% The left operand of the \var{in} operator is not an ordinal or enumeration which fits +% within 8-bits, this may lead to range check errors. The \var{in} operator +% currently only supports a left operand which fits within a byte. In the case of +% enumerations, the size of an element of an enumeration can be controlled with +% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches. +type_w_smaller_possible_range_check=04048_W_Typy rnej wielkoci - moliwa utrata danych lub bd zakresu +% There is an assignment to a smaller type than the source type. This means that +% this may cause a range-check error, or may lead to possible loss of data. +type_h_smaller_possible_range_check=04049_H_Typy rnej wielkoci - moliwa utrata danych lub bd zakresu +% There is an assignment to a smaller type than the source type. This means that +% this may cause a range-check error, or may lead to possible loss of data. +type_e_cant_take_address_of_abstract_method=04050_E_Nie mona uzyska adresu metody abstrakcyjnej +% An abstract method has no body, so the address of an abstract method can't be taken. +type_e_operator_not_allowed=04051_E_Operator nie pasuje do operandu +% You are trying an operator that is not available for the type of the +% operands +type_e_constant_expr_expected=04052_E_Oczekiwano staego wyraenia +% The compiler expects an constant expression, but gets a variable expression. +type_e_operator_not_supported_for_types=04053_E_Operacja "$1" niedozwolona dla typw "$2" i "$3" +% The operation is not allowed for the supplied types +type_e_illegal_type_conversion=04054_E_Nieprawidowa konwersja typw: "$1" do "$2" +% When doing a type-cast, you must take care that the sizes of the variable and +% the destination type are the same. +type_h_pointer_to_longint_conv_not_portable=04055_H_Konwersja pomidzy typami cakowitymi i wskanikami jest nieprzenona +% If you typecast a pointer to a longint (or vice-versa), this code will not compile +% on a machine using 64-bit for pointer storage. +type_w_pointer_to_longint_conv_not_portable=04056_W_Konwersja pomidzy typami cakowitymi i wskanikami jest nieprzenona +% If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can +% cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used +% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead. +type_e_cant_choose_overload_function=04057_E_Nie mona okreli, ktr z przecionych funkcji wywoa +% You're calling overloaded functions with a parameter that doesn't correspond +% to any of the declared function parameter lists. e.g. when you have declared +% a function with parameters \var{word} and \var{longint}, and then you call +% it with a parameter which is of type \var{integer}. +type_e_illegal_count_var=04058_E_Nieprawidowy typ licznika ptli +% The type of a \var{for} loop variable must be an ordinal type. +% Loop variables cannot be reals or strings. +% \end{description} +# +# Symtable +# +# 05055 is the last one used +# +% \section{Symbol handling} +% This section lists all the messages that concern the handling of symbols. +% This means all things that have to do with procedure and variable names. +% \begin{description} +sym_e_id_not_found=05000_E_Nie odnaleziono identyfikatora $1 +% The compiler doesn't know this symbol. Usually happens when you misspel +% the name of a variable or procedure, or when you forgot to declare a +% variable. +sym_f_internal_error_in_symtablestack=05001_F_Bd wewntrzny w SymTableStack() +% An internal error occurred in the compiler; If you encounter such an error, +% please contact the developers and try to provide an exact description of +% the circumstances in which the error occurs. +sym_e_duplicate_id=05002_E_Zduplikowany identyfikator $1 +% The identifier was already declared in the current scope. +sym_h_duplicate_id_where=05003_H_Identyfikator ju zdefiniowany w $1 w lini $2 +% The identifier was already declared in a previous scope. +sym_e_unknown_id=05004_E_Nieznany identyfikator $1 +% The identifier encountered has not been declared, or is used outside the +% scope where it is defined. +sym_e_forward_not_resolved=05005_E_Deklaracaja naprzd nie rozwizana $1 +% This can happen in two cases: +% \begin{itemize} +% \item This happens when you declare a function (in the \var{interface} part, or +% with a \var{forward} directive, but do not implement it. +% \item You reference a type which isn't declared in the current \var{type} +% block. +% \end{itemize} +sym_e_error_in_type_def=05007_E_Bd w definicji typu +% There is an error in your definition of a new array type: +% \item One of the range delimiters in an array declaration is erroneous. +% For example, \var{Array [1..1.25]} will trigger this error. +sym_e_forward_type_not_resolved=05009_E_Brak definicji typu $1 +% A symbol was forward defined, but no declaration was encountered. +sym_e_only_static_in_static=05010_E_Tylko zmienne statyczne mog by uywane w metodach statycznych +% A static method of an object can only access static variables. +sym_f_type_must_be_rec_or_class=05012_F_Oczekiwano rekordu lub klasy +% The variable or expression isn't of the type \var{record} or \var{class}. +sym_e_no_instance_of_abstract_object=05013_E_Instancje klas i obiektw z metodami abstrakcyjnymi niedozwolone +% You are trying to generate an instance of a class which has an abstract +% method that wasn't overridden. +sym_w_label_not_defined=05014_W_Etykieta nie zostaa zdefiniowana $1 +% A label was declared, but not defined. +sym_e_label_used_and_not_defined=05015_E_Etykieta niezdefiniowana przed uyciem $1 +% A label was declared and used, but not defined. +sym_e_ill_label_decl=05016_E_Nieprawidowa deklaracja etykiety +% This error should never happen; it occurs if a label is defined outside a +% procedure or function. +sym_e_goto_and_label_not_supported=05017_E_GOTO i LABEL nieobsugiwane (uyj opcji -Sg) +% You must compile a program which has \var{label}s and \var{goto} statements +% with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't +% supported. +sym_e_label_not_found=05018_E_Nie odnaleziono etykiety +% A \var{goto label} was encountered, but the label isn't declared. +sym_e_id_is_no_label_id=05019_E_Identyfikator nie jest etykiet +% The identifier specified after the \var{goto} isn't of type label. +sym_e_label_already_defined=05020_E_Powtrna definicja etykiety +% You are defining a label twice. You can define a label only once. +sym_e_ill_type_decl_set=05021_E_Nieprawidowa deklaracja typu zbiorowego +% The declaration of a set contains an invalid type definition. +sym_e_class_forward_not_resolved=05022_E_Brak implementacji klasy $1 +% You declared a class, but you didn't implement it. +sym_n_unit_not_used=05023_H_Modu $1 nieuywany w $2 +% The unit referenced in the \var{uses} clause is not used. +sym_h_para_identifier_not_used=05024_H_Parametr $1 nieuywany +% The identifier was declared (locally or globally) but +% was not used (locally or globally). +sym_n_local_identifier_not_used=05025_N_Lokalna zmienna $1 nieuywana +% You have declared, but not used a variable in a procedure or function +% implementation. +sym_h_para_identifier_only_set=05026_H_Wartoc przypisana do $1 nie jest nigdzie uyta +% The identifier was declared (locally or globally) +% set but not used (locally or globally). +sym_n_local_identifier_only_set=05027_N_Wartoc przypisana do $1 nie jest nigdzie uyta +% The variable in a procedure or function +% implementation is declared, set but never used. +sym_h_local_symbol_not_used=05028_H_Lokalna(y) $1 $2 nie zosta(a) uyta(y) +% A local symbol is never used. +sym_n_private_identifier_not_used=05029_N_Prywatne pole $1.$2 nieuywane +sym_n_private_identifier_only_set=05030_N_Wartoc przypisana do lokalnego pola $1.$2 nie jest nigdzie uyta +sym_n_private_method_not_used=05031_N_Metoda prywatna $1.$2 nieuywana +sym_e_set_expected=05032_E_Oczekiwano typu zbiorowego +% The variable or expression is not of type \var{set}. This happens in an +% \var{in} statement. +sym_w_function_result_not_set=05033_W_Nie wyglda na to, eby warto zwracana przez funkcj bya ustawiona +% You can get this warning if the compiler thinks that a function return +% value is not set. This will not be displayed for assembler procedures, +% or procedures that contain assembler blocks. +sym_w_wrong_C_pack=05034_W_Typ $1 jest le wyrwnany dla C w biecym rekordzie +% Arrays with sizes not multiples of 4 will be wrongly aligned +% for C structures. +sym_e_illegal_field=05035_E_Nieznany identyfikator pola rekordu $1 +% The field doesn't exist in the record definition. +sym_n_uninitialized_local_variable=05036_W_Nie wyglda na to, eby lokalna zmienna $1 bya zainicjowana +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +sym_n_uninitialized_variable=05037_W_Nie wyglda na to, eby zmienna $1 bya zainicjowana +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +sym_e_id_no_member=05038_E_Identyfikator nie wskazuje adnej metody ani pola $1 +% This error is generated when an identifier of a record, +% field, or method is accessed while it is not defined. +sym_h_param_list=05039_H_Znaleziono deklaracj: $1 +% You get this when you use the \var{-vb} switch. In case an overloaded +% procedure is not found, then all candidate overloaded procedures are +% listed, with their parameter lists. +sym_e_segment_too_large=05040_E_Element jest zbyt duy +% You get this when you declare a data element whose size exceeds the +% prescribed limit (2 Gb on 80386+/68020+ processors) +sym_e_no_matching_implementation_found=05042_E_Nie znaleziono implementacji metody interfejsu "$1" +% There was no matching method found which could implement the interface +% method. Check argument types and result type of the methods. +sym_w_deprecated_symbol=05043_W_Symbol "$1" jest przestarzay +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{deprecated} is used. Deprecated symbols may no longer +% be available in newer versions of the unit / library. Usage of this symbol +% should be avoided as much as possible. +sym_w_non_portable_symbol=05044_W_Symbolu "$1" nie da si przenie na inne platformy +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{platform} is used. This symbol's value, usage +% and availability is platform specific and should not be used +% if the source code must be portable. +sym_w_non_implemented_symbol=05055_W_Symbol "$1" nie jest zaimplementowany +% This means that a symbol (a variable, routine, etc...) which is +% declared as \var{unimplemented} is used. This symbol is defined, +% but is not yet implemented on this specific platform. +sym_e_cant_create_unique_type=05056_E_Nie mona utworzy unikalnego typu z tego typu +% Only simple types like ordinal, float and string types are supported when +% redefining a type with \var{type newtype = type oldtype;}. +sym_h_uninitialized_local_variable=05057_H_Zmienna lokalna "$1" moe nie by zainicjalizowana +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +sym_h_uninitialized_variable=05058_H_Zmienna "$1" moe nie by zainicjalizowana +% This message is displayed if the compiler thinks that a variable will +% be used (i.e. appears in the right-hand-side of an expression) when it +% was not initialized first (i.e. appeared in the left-hand side of an +% assigment) +% \end{description} +# +# Codegenerator +# +# 06040 is the last used one +# +% \section{Code generator messages} +% This section lists all messages that can be displayed if the code +% generator encounters an error condition. +% \begin{description} +cg_e_parasize_too_big=06009_E_Rozmiar listy parametrw przekracza 65535 bajtw +% The I386 processor limits the parameter list to 65535 bytes (the \var{RET} +% instruction causes this) +cg_e_file_must_call_by_reference=06012_E_Zmienne plikowe musz by przekazywane przez referencje +% You cannot specify files as value parameters, i.e. they must always be +% declared \var{var} parameters. +cg_e_cant_use_far_pointer_there=06013_E_Uycie wskanika far niedozwolone w tym miejscu +% Free Pascal doesn't support far pointers, so you cannot take the address of +% an expression which has a far reference as a result. The \var{mem} construct +% has a far reference as a result, so the following code will produce this +% error: +% \begin{verbatim} +% var p : pointer; +% ... +% p:=@mem[a000:000]; +% \end{verbatim} +cg_e_dont_call_exported_direct=06015_E_EXPORT declared functions can't be called +% No longer in use. +cg_w_member_cd_call_from_method=06016_W_Moliwe nieprawidowe wywoanie konstruktora/destruktora +% The compiler detected that a constructor or destructor is called within a +% a method. This will probably lead to problems, since constructors / destructors +% require parameters on entry. +cg_n_inefficient_code=06017_N_Niewydajny kod +% Your statement seems dubious to the compiler. +cg_w_unreachable_code=06018_W_Kod nie zostanie nigdy wykonany +% You specified a construct which will never be executed. Example: +% \begin{verbatim} +% while false do +% begin +% {.. code ...} +% end; +% \end{verbatim} +cg_e_cant_call_abstract_method=06020_E_Nie mona bezporednio wywoa metod abstrakcyjnych +% You cannot call an abstract method directy, instead you must call a +% overriding child method, because an abstract method isn't implemented. +cg_d_register_weight=06027_DL_Rejestr $1 waga $2 $3 +% Debugging message. Shown when the compiler considers a variable for +% keeping in the registers. +cg_d_stackframe_omited=06029_DL_Pominito ramk stosu +% Some procedure/functions do not need a complete stack-frame, so it is omitted. +% This message will be displayed when the {-vd} switch is used. +cg_e_unable_inline_object_methods=06031_E_Metody obiektw i klas nie mog by inline +% You cannot have inlined object methods. +cg_e_unable_inline_procvar=06032_E_Wywoania procedur ze zmiennych proceduralnych nie mog by inline +% A procedure with a procedural variable call cannot be inlined. +cg_e_no_code_for_inline_stored=06033_E_Brak kodu dla procedury inline +% The compiler couldn't store code for the inline procedure. +cg_e_can_access_element_zero=06035_E_Brak dostpu do zerowego elementu ansi/wide- lub longstringa, uyj (set)length +% You should use \var{setlength} to set the length of an ansi/wide/longstring +% and \var{length} to get the length of such kinf of string +cg_e_cannot_call_cons_dest_inside_with=06037_E_Konstruktory i destruktory nie mog by wywoywane w klauzuli 'with' +% Inside a \var{with} clause you cannot call a constructor or destructor for the +% object you have in the \var{with} clause. +cg_e_cannot_call_message_direct=06038_E_Nie mona wywoa bezporednio metody obsugujcej komunikaty +% A message method handler method cannot be called directly if it contains an +% explicit self argument +cg_e_goto_inout_of_exception_block=06039_E_Skok do bloku lub poza blok exception +% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}: +% \begin{verbatim} +% label 1; +% +% ... +% +% try +% if not(final) then +% goto 1; // this line will cause an error +% finally +% ... +% end; +% 1: +% ... +% \end{verbatim} +cg_e_control_flow_outside_finally=06040_E_Break, Continue i Exit nie s dozwolone w bloku finally +% It isn't allowed to use the control flow statements \var{break}, +% \var{continue} and \var{exit} +% inside a finally statement. The following example shows the problem: +% \begin{verbatim} +% ... +% try +% p; +% finally +% ... +% exit; // This exit ISN'T allowed +% end; +% ... +% +% \end{verbatim} +% If the procedure \var{p} raises an exception the finally block is +% executed. If the execution reaches the exit, it's unclear what to do: +% exiting the procedure or searching for another exception handler +cg_w_parasize_too_big=06041_W_Rozmiar parametrw przekroczy limit dla niektrych procesorw +% This indicates that you are declaring more than 64K of parameters, which +% might not be supported on other processor targets. +cg_w_localsize_too_big=06042_W_Rozmiar zmiennych lokalnych przekroczy limit dla dla niektrych procesorw +% This indicates that you are declaring more than 32K of lcoal variables, which +% might not be supported on other processor targets. +cg_e_localsize_too_big=06043_E_Rozmiar zmiennych lokalnych przekroczy dopuszczalny limit +% This indicates that you are declaring more than 32K of lcoal variables, which +% is not supported by this processor. +cg_e_break_not_allowed=06044_E_BREAK mona uy tylko wewntrz ptli +% You're trying to use \var{break} outside a loop construction. +cg_e_continue_not_allowed=06045_E_CONTINUE mona uy tylko wewntrz ptli +% You're trying to use \var{continue} outside a loop construction. +% \end{description} +# EndOfTeX + +# +# Assembler reader +# +# 07097 is the last used one +# +asmr_d_start_reading=07000_DL_Rozpoczcie parsowania bloku asemblera w stylu $1 +% This informs you that an assembler block is being parsed +asmr_d_finish_reading=07001_DL_Zakoczenie parsowania bloku asemblera w stylu $1 +% This informs you that an assembler block has finished. +asmr_e_none_label_contain_at=07002_E_aden identyfikator (poza etykietami) nie moe zawiera @ +% A identifier which isn't a label can't contain a @. +asmr_e_building_record_offset=07004_E_Bd tworzenia offsetu rekordu +% There has an error occured while building the offset of a record/object +% structure, this can happend when there is no field specified at all or +% an unknown field identifier is used. +asmr_e_offset_without_identifier=07005_E_OFFSET uyty bez identyfikatora +% You can only use OFFSET with an identifier. Other syntaxes aren't +% supported +asmr_e_type_without_identifier=07006_E_TYPE uyte bez identyfikatora +% You can only use TYPE with an identifier. Other syntaxes aren't +% supported +asmr_e_no_local_or_para_allowed=07007_E_Nie mona uywa lokalnych zmiennych i parametrw w tym miejscu +% You can't use a local variable or parameter here, mostly because the +% addressing of locals and parameters is done using the frame pointer register so the +% address can't be obtained directly. +asmr_e_need_offset=07008_E_Naley tu uy OFFSET +% You need to use OFFSET <id> here to get the address of the identifier. +asmr_e_need_dollar=07009_E_Naley uy tu $ +% You need to use $<id> here to get the address of the identifier. +asmr_e_cant_have_multiple_relocatable_symbols=07010_E_Mona uy tylko jednego symbolu relokacyjnego +% You can't have more than one relocatable symbol (variable/typed constant) +% in one argument. +asmr_e_only_add_relocatable_symbol=07011_E_Symbole relokacyjne mog by tylko dodane +% Relocatable symbols (variable/typed constant) can't be used with other +% operators. Only addition is allowed. +asmr_e_invalid_constant_expression=07012_E_Nieprawidowe stae wyraenie +% There is an error in the constant expression. +asmr_e_relocatable_symbol_not_allowed=07013_E_Nie mona uy symbolu relokacyjnego w tym miejscu +% You can't use a relocatable symbol (variable/typed constant) here. +asmr_e_invalid_reference_syntax=07014_E_Nieprawidowa skadnia referencji +% There is an error in the reference. +asmr_e_local_para_unreachable=07015_E_Nie mona osign $1 z tego kodu +% You can not read directly the value of local or para +% of a higher level in assembler code (except for +% local assembler code without parameter nor locals). +asmr_e_local_label_not_allowed_as_ref=07016_E_Lokalne symbole/etykiety nie s dozwolone jako referencje +% You can't use local symbols/labels as references +asmr_e_wrong_base_index=07017_E_Nieprawidowe uycie rejestru indeksu i bazy +% There is an error with the base and index register, they are +% probably incorrect +asmr_w_possible_object_field_bug=07018_W_Moliwy bd w obsugiwaniu pola obiektu +% Fields of objects or classes can be reached directly in normal or objfpc +% modes but TP and Delphi modes treat the field name as a simple offset. +asmr_e_wrong_scale_factor=07019_E_Nieprawidowa skala +% The scale factor given is wrong, only 1,2,4 and 8 are allowed +asmr_e_multiple_index=07020_E_Uycie wielu rejestrw indeksu +% You are trying to use more than one index register +asmr_e_invalid_operand_type=07021_E_Nieprawidowy typ operandu +% The operand type doesn't match with the opcode used +asmr_e_invalid_string_as_opcode_operand=07022_E_Nieprawidowy string jako operand: $1 +% The string specified as operand is not correct with this opcode +asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE i @DATA nieobsugiwane +% @CODE and @DATA are unsupported and are ignored. +asmr_e_null_label_ref_not_allowed=07024_E_Puste etykiety referencji s niedozwolone +asmr_e_expr_zero_divide=07025_E_Dzielenie przez zero +% There is a division by zero in a constant expression +asmr_e_expr_illegal=07026_E_Nieprawidowe wyraenie +% There is an illegal expression in a constant expression +asmr_e_escape_seq_ignored=07027_E_Sekwencja zignorowana: $1 +% There is a C-styled string, but the escape sequence in the string +% is unknown, and is therefore ignored +asmr_e_invalid_symbol_ref=07028_E_Nieprawidowa referencja symbolu +asmr_w_fwait_emu_prob=07029_W_Fwait moe powodowa problemy emulacji z emu387 +asmr_w_fadd_to_faddp=07030_W_$1 bez operandu przetumaczone na $1P +asmr_w_enter_not_supported_by_linux=07031_W_Instrukcja ENTER nie jest obsugiwana przez jdro Linuksa +% ENTER instruction can generate a stack page fault that is not +% caught correctly by the i386 Linux page handler. +asmr_w_calling_overload_func=07032_W_Wywoanie przecionej funkcji z poziomu asemblera +% There is a call to an overloaded method in the assembler block, +% this might be the sign there is a problem +asmr_e_unsupported_symbol_type=07033_E_Nieobsugiwany typ symbolu dla operandu +asmr_e_constant_out_of_bounds=07034_E_Warto staa przekracza zakres +asmr_e_error_converting_decimal=07035_E_Bd konwersji liczby dziesitnej $1 +% A constant decimal value does not have the correct syntax +asmr_e_error_converting_octal=07036_E_Bd konwersji liczby semkowej $1 +% A constant octal value does not have the correct syntax +asmr_e_error_converting_binary=07037_E_Bd konwersji liczby dwjkowej $1 +% A constant binary value does not have the correct syntax +asmr_e_error_converting_hexadecimal=07038_E_Bd konwersji liczby szesnastkowej $1 +% A constant hexadecimal value does not have the correct syntax +asmr_h_direct_global_to_mangled=07039_H_$1 przetumaczone na $2 +asmr_w_direct_global_is_overloaded_func=07040_W_$1 jest przypisane do przecionej funkcji +asmr_e_cannot_use_SELF_outside_a_method=07041_E_Nie mona uy SELF poza metod +% There is a reference to the \var{self} symbol while it is not +% allowed. \var{self} can only be referenced inside methods +asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Nie mona uy OLDEBP poza zagniedon procedur +% There is a reference to the \var{oldebp} symbol while it is not +% allowed. \var{oldebp} can only be referenced inside nested routines +asmr_e_void_function=07043_W_Procedury nie mog zwraca wartoci w kodzie asemblera +% Trying to return a value while in a procedure. A procedure +% does not have any return value +asmr_e_SEG_not_supported=07044_E_SEG nie obsugiwane +asmr_e_size_suffix_and_dest_dont_match=07045_E_Przyrostek okrelajcy rozmiar nie pasuje do rda lub celu +% The register size and the opcode size suffix don't match. This is +% probably an error in the assembler statement +asmr_w_size_suffix_and_dest_dont_match=07046_W_Przyrostek okrelajcy rozmiar nie pasuje do rda lub celu +% The register size and the opcode size suffix don't match. This is +% probably an error in the assembler statement +asmr_e_syntax_error=07047_E_Bd skadni asemblera +% There is an assembler syntax error +asmr_e_invalid_opcode_and_operand=07048_E_Nieprawidowa kombinacja opkodu i operandu +% The opcode cannot be used with this type of operand +asmr_e_syn_operand=07049_E_Bd skadni asemblera w operandzie +asmr_e_syn_constant=07050_E_Bd skadni asemblera w staej +asmr_e_invalid_string_expression=07051_E_Nieprawidowe wyraenie ze stringiem +asmr_w_const32bit_for_address=07052_W_Staa $1 prawdopodobnie nie powinna by wskanikiem +% A constant expression represents an address which does not fit +% into a pointer. The address is probably incorrect +asmr_e_unknown_opcode=07053_E_Nieznany opkod $1 +% This opcode is not known +asmr_e_invalid_or_missing_opcode=07054_E_Nieprawidowy opkod lub brak opkodu +asmr_e_invalid_prefix_and_opcode=07055_E_Nieprawidowa kombinacja prefiksu i opkodu: $1 +asmr_e_invalid_override_and_opcode=07056_E_Nieprawidowa kombinacja override i opkodu: $1 +asmr_e_too_many_operands=07057_E_Zbyt duo operandw +% There are too many operands for this opcode. Check your +% assembler syntax +asmr_w_near_ignored=07058_W_NEAR zignorowane +asmr_w_far_ignored=07059_W_FAR zignorowane +asmr_e_dup_local_sym=07060_E_Zduplikowany symbol lokalny $1 +asmr_e_unknown_local_sym=07061_E_Niezdefiniowany symbol lokalny $1 +asmr_e_unknown_label_identifier=07062_E_Nieznana etykieta $1 +asmr_e_invalid_register=07063_E_Nieprawidowa nazwa rejestru +% There is an unknown register name used as operand. +asmr_e_invalid_fpu_register=07064_E_Nieprawidowa nazwa rejestru zmiennoprzecinkowego +% There is an unknown register name used as operand. +asmr_w_modulo_not_supported=07066_W_Modulo nieobsugiwane +asmr_e_invalid_float_const=07067_E_Nieprawidowa staa zmiennoprzecinkowa $1 +% The floating point constant declared in an assembler block is +% invalid. +asmr_e_invalid_float_expr=07068_E_Nieprawidowe wyraenie zmiennoprzecinkowe +% The floating point expression declared in an assembler block is +% invalid. +asmr_e_wrong_sym_type=07069_E_Nieprawidowy typ symbolu +asmr_e_cannot_index_relative_var=07070_E_Nie mona ideksowa rejestrem zmiennej lokalnej/parametru +% Trying to index using a base register a symbol which is already relative +% to a register. This is not possible, and will probably lead to crashes. +asmr_e_invalid_seg_override=07071_E_Invalid segment override expression +asmr_w_id_supposed_external=07072_W_Identifier $1 supposed external +% There is a reference to an undefined symbol. This will not result +% in an error, since the symbol might be external, but may cause +% problems at link time if the symbol is not defined anywhere. +asmr_e_string_not_allowed_as_const=07073_E_Stringi nie mog by staymi +% Character strings are not allowed as constants. +asmr_e_no_var_type_specified=07074_Nie okrelono typu zmiennej +% The syntax expects a type idenfitifer after the dot, but +% none was found. +asmr_w_assembler_code_not_returned_to_text=07075_E_brak powrotu do sekcji text w kodzie asemblera +% There was a directive in the assembler block to change sections, +% but there is a missing return to the text section at the end +% of the assembler block. This might cause errors during link time. +asmr_e_not_directive_or_local_symbol=07076_E_To nie jest ani dyrektywa, ani symbol lokalny: $1 +% This symbol is unknown. +asmr_w_using_defined_as_local=07077_E_Uycie zdefiniowanej nazwy jako lokalnej etykiety +asmr_e_dollar_without_identifier=07078_E_Brak identyfikatora przy znaku dolara +% A constant expression has an identifier which does not start with +% the $ symbol. +asmr_w_32bit_const_for_address=07079_W_32bitowa staa uyta jako adres +% A constant was used as an address. This is probably an error, +% since using absolute addresses will probably not work. +asmr_n_align_is_target_specific=07080_N_.align nie jest przenone midzy platformami, uyj .balign lub .p2align +% Using the .align directive is platform specific, and its meaning will vary +% from one platform to another. +asmr_e_cannot_access_field_directly_for_parameters=07081_E_Nie mona odwoywa si bezporednio do pl parametrw +% You should load the parameter first into a register and then access the +% fields using that register. +asmr_e_cannot_access_object_field_directly=07082_E_Nie mona odwoywa si bezporednio do pl obiektw/klas +% You should load the self pointer first into a register and then access the +% fields using the register as base. By default the self pointer is available +% in the esi register on i386. +asmr_e_unable_to_determine_reference_size=07083_E_Nie okrelono rozmiaru operandu +% You should specify explicitly a size for the reference, because +% the compiler is unable to determine what size (byte,word,dword,etc.) it +% should use for the reference. +asmr_e_cannot_use_RESULT_here=07084_E_Nie mona uy RESULT w tej funkcji +% Some functions which return complex types cannot use the \var{result} +% keyword. +asmr_w_adding_explicit_args_fXX=07086_W_"$1" bez operandu przetumaczone na "$1 %st,%st(1)" +asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" przetumaczone na "$1 %st,%st(n)" +asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" przetumaczone na "$1 %st(n),%st" +asmr_e_invalid_char_smaller=07089_E_Znak < niedozwolony w tym miejscu +% The shift operator requires the << characters. Only one +% of those characters was found. +asmr_e_invalid_char_greater=07090_E_Znak > niedozwolony w tym miejscu +% The shift operator requires the >> characters. Only one +% of those characters was found. +asmr_w_align_not_supported=07093_W_ALIGN nieobsugiwane +asmr_e_no_inc_and_dec_together=07094_E_Inc i Dec nie mog wystpowa razem +% Trying to use an increment and a decrement within the same +% opcode on the 680x0. This is impossible. +asmr_e_invalid_reg_list_in_movem=07095_E_Nieprawidowa lista rejestrw dla movem +% Trying to use the \var{movem} opcode with invalid registers +% to save or restore. +asmr_e_invalid_reg_list_for_opcode=07096_E_Nieprawidowa lista rejestrw dla opkodu +asmr_e_higher_cpu_mode_required=07097_E_Ta instrukcja wymaga wyszego typu procesora ($1) +% Trying to use an instruction which is not supported in the current +% cpu mode. Use a higher cpu generation to be able to use this +% opcode in your assembler block +asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Nie okrelono rozmiaru operandw, domylne uycie DWORD +% You should specify explicitly a size for the reference, because +% the compiler is unable to determine what size (byte,word,dword,etc.) it +% should use for the reference. This warning is only used in Delphi mode where +% it falls back to use DWORD as default. +asmr_e_illegal_shifterop_syntax=07099_E_Bd skadni przy operandzie shifter +% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't +% a valid shifter operand. Example for an operation with shifter operand: +% \begin{verbatim} +% asm +% orr r2,r2,r2,lsl #8 +% end; +% \end{verbatim} +# +# Assembler/binary writers +# +# 08018 is the last used one +# +asmw_f_too_many_asm_files=08000_F_Zbyt duo plikw asemblera +% With smartlinking enabled, there are too many assembler +% files generated. Disable smartlinking. +asmw_f_assembler_output_not_supported=08001_F_Wybrany typ wyjciowy asemblera nieobsugiwany +asmw_f_comp_not_supported=08002_F_Comp nieobsugiwany +asmw_f_direct_not_supported=08003_F_Direct nieobsugiwane przy zapisywaniu bezporednim +% Direct assembler mode is not supported for binary writers. +asmw_e_alloc_data_only_in_bss=08004_E_Alokacja danych jest dozwolona tylko w sekcji bss +asmw_f_no_binary_writer_selected=08005_F_Nie wybrano sposobu zapisywania binariw +asmw_e_opcode_not_in_table=08006_E_Asm: Brak opkodu $1 w tablicy +asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 nieprawidowa kombinacja opkodu i operandw +asmw_e_16bit_not_supported=08008_E_Asm: 16bitowe referencje nieobsugiwane +asmw_e_invalid_effective_address=08009_E_Asm: Nieprawidowy adres efektywny +asmw_e_immediate_or_reference_expected=08010_E_Asm: Immediate or reference expected +asmw_e_value_exceeds_bounds=08011_E_Asm: $1 warto przekracza zakres $2 +asmw_e_short_jmp_out_of_range=08012_E_Asm: Krtki skok poza zasig $1 +asmw_e_undefined_label=08013_E_Asm: Nieznana etykieta $1 +asmw_e_comp_not_supported=08014_E_Asm: Typ Comp nieobsugiwany dla tego celu +asmw_e_extended_not_supported=08015_E_Asm: Typ Extended nieobsugiwany dla tego celu +asmw_e_duplicate_label=08016_E_Asm: Zduplikowana etykieta $1 +asmw_e_redefined_label=08017_E_Asm: Etykieta powtrnie zdefiniowana $1 +asmw_e_first_defined_label=08018_E_Asm: Najpierw zdefiniowana tutaj +asmw_e_invalid_register=08019_E_Asm: Nieprawidowy rejestr $1 + +# +# Executing linker/assembler +# +# 09034 is the last used one +# +# BeginOfTeX +% +% \section{Errors of assembling/linking stage} +% This section lists errors that occur when the compiler is processing the +% command line or handling the configuration files. +% \begin{description} +exec_w_source_os_redefined=09000_W_Zmieniono rdowy system operacyjny +exec_i_assembling_pipe=09001_I_Asemblowanie (potok) $1 +exec_d_cant_create_asmfile=09002_E_Nie mona utworzy plikw asemblera: $1 +% The mentioned file can't be created. Check if you have got +% access permissions to create this file +exec_e_cant_create_objectfile=09003_E_Nie mona utworzy pliku: $1 +% The mentioned file can't be created. Check if you've +% got access permissions to create this file +exec_e_cant_create_archivefile=09004_E_Nie mona utworzy pliku: $1 +% The mentioned file can't be created. Check if you've +% access permissions to create this file +exec_e_assembler_not_found=09005_E_Assembler $1 nie znaleziony, przeczenie na zewntrzn asemblacj +exec_t_using_assembler=09006_T_Uywanie assemblera: $1 +exec_e_error_while_assembling=09007_E_Bd asemblera, kod wyjcia $1 +% There was an error while assembling the file using an external assembler. +% Consult the documentation of the assembler tool to find out more information +% on this error. +exec_e_cant_call_assembler=09008_E_Nie mona wywoa asemblera, bd $1 przeczenie na zewntrzn asemblacj +exec_i_assembling=09009_I_Asemblowanie $1 +exec_i_assembling_smart=09010_I_Asemblowanie do linkowania smart $1 +exec_w_objfile_not_found=09011_W_Obiekt $1 nieodnaleziony, linkowanie moe si nie powie! +% One of the object file is missing, and linking will probably fail. +% Check your paths. +exec_w_libfile_not_found=09012_W_Biblioteka $1 nieodnaleziona, Linkowanie moe si nie powie! +% One of the library file is missing, and linking will probably fail. +% Check your paths. +exec_e_error_while_linking=09013_E_Bd podczas linkowania +% Generic error while linking. +exec_e_cant_call_linker=09014_E_Nie mona wywoa linkera, przeczenie na zewntrzne linkowanie +exec_i_linking=09015_I_Linkowanie $1 +exec_e_util_not_found=09016_E_Narzdzie $1 nieodnalezione, przeczenie na zewntrzne linkowanie +exec_t_using_util=09017_T_Uruchamianie $1 +exec_e_exe_not_supported=09018_E_Tworzenie plikw wykonywalnych nieobsugiwane +exec_e_dll_not_supported=09019_E_Tworzenie bibliotek dynamicznych/wspdzielonych nieobsugiwane +exec_i_closing_script=09020_I_Zamykanie skryptu $1 +exec_e_res_not_found=09021_E_Kompilator zasobw nieodnaleziony, przeczenie na tryb zewntrzny +exec_i_compilingresource=09022_I_Kompilacja zasobu $1 +exec_t_unit_not_static_linkable_switch_to_smart=09023_T_Modu $1 nie moe by linkowany statycznie, przeczenie na linkowanie smart +exec_t_unit_not_smart_linkable_switch_to_static=09024_T_Modu $1 nie moze by linkowany smart, przeczenie na linkowanie statyczne +exec_t_unit_not_shared_linkable_switch_to_static=09025_T_Modu $1 nie moe by linkowany dynamicznie, przeczenie na linkowanie statyczne +exec_e_unit_not_smart_or_static_linkable=09026_E_Modu $1 nie moe by linkowany statycznie ani smart +exec_e_unit_not_shared_or_static_linkable=09027_E_Modu $1 nie moe by linkowany statycznie ani dynamicznie +%\end{description} +# EndOfTeX + +# +# Executable information +# +execinfo_f_cant_process_executable=09128_F_Nie mona przetwarza pliku $1 +execinfo_f_cant_open_executable=09129_F_Nie mona otworzy pliku wykonywalnego $1 +execinfo_x_codesize=09130_X_Rozmiar kodu: $1 bajtw +execinfo_x_initdatasize=09131_X_Rozmiar zainicjowanych danych: $1 bajtw +execinfo_x_uninitdatasize=09132_X_Rozmiar niezainicjowanych danych: $1 bajtw +execinfo_x_stackreserve=09133_X_Zarezerwowany rozmiar stosu: $1 bajtw +execinfo_x_stackcommit=09134_X_Aktywny rozmiar stosu: $1 bajtw + +# +# Unit loading +# +# 10041 is the last used one +# +# BeginOfTeX +% \section{Unit loading messages.} +% This section lists all messages that can occur when the compiler is +% loading a unit from disk into memory. Many of these mesages are +% informational messages. +% \begin{description} +unit_t_unitsearch=10000_T_Poszukiwanie moduu: $1 +% When you use the \var{-vt}, the compiler tells you where it tries to find +% unit files. +unit_t_ppu_loading=10001_T_Otwieranie PPU $1 +% When the \var{-vt} switch is used, the compiler tells you +% what units it loads. +unit_u_ppu_name=10002_U_Nazwa PPU: $1 +% When you use the \var{-vu} flag, the unit name is shown. +unit_u_ppu_flags=10003_U_Flagi PPU: $1 +% When you use the \var{-vu} flag, the unit flags are shown. +unit_u_ppu_crc=10004_U_Crc PPU: $1 +% When you use the \var{-vu} flag, the unit CRC check is shown. +unit_u_ppu_time=10005_U_Czas PPU: $1 +% When you use the \var{-vu} flag, the time the unit was compiled is shown. +unit_u_ppu_file_too_short=10006_U_Plik PPU zbyt krtki +% The ppufile is too short, not all declarations are present. +unit_u_ppu_invalid_header=10007_U_Nieprawidowy nagwek PPU (brak PPU na pocztku) +% A unit file contains as the first three bytes the ascii codes of \var{PPU} +unit_u_ppu_invalid_version=10008_U_Nieprawidowa wersja PPU $1 +% This unit file was compiled with a different version of the compiler, and +% cannot be read. +unit_u_ppu_invalid_processor=10009_U_PPU jest skompilowany dla innego procesora +% This unit file was compiled for a different processor type, and +% cannot be read +unit_u_ppu_invalid_target=10010_U_PPU skompilowany dla innej platformy docelowej +% This unit file was compiled for a different target, and +% cannot be read +unit_u_ppu_source=10011_U_rdo PPU: $1 +% When you use the \var{-vu} flag, the unit CRC check is shown. +unit_u_ppu_write=10012_U_Zapisywanie $1 +% When you specify the \var{-vu} switch, the compiler will tell you where it +% writes the unit file. +unit_f_ppu_cannot_write=10013_F_Nie mona zapisa pliku PPU +% An error occurred when writing the unit file. +unit_f_ppu_read_error=10014_F_Bd podczas czytania pliku PPU +% This means that the unit file was corrupted, and contains invalid +% information. Recompilation will be necessary. +unit_f_ppu_read_unexpected_end=10015_F_Nieoczekiwane zakoczenie pliku PPU +% Unexpected end of file. This may mean that the PPU file is +% corrupted. +unit_f_ppu_invalid_entry=10016_F_Nieprawidowy plik PPU: $1 +% The unit the compiler is trying to read is corrupted, or generated with a +% newer version of the compiler. +unit_f_ppu_dbx_count_problem=10017_F_Bd podczas liczenia PPU Dbx +% There is an inconsistency in the debugging information of the unit. +unit_e_illegal_unit_name=10018_E_Nieprawidowa nazwa moduu: $1 +% The name of the unit does not match the file name. +unit_f_too_much_units=10019_F_Zbyt duo moduw +% \fpc has a limit of 1024 units in a program. You can change this behavior +% by changing the \var{maxunits} constant in the \file{files.pas} file of the +% compiler, and recompiling the compiler. +unit_f_circular_unit_reference=10020_F_Zaptlone nawizanie pomidzy moduami $1 i $2 +% Two units are using each other in the interface part. This is only allowed +% in the \var{implementation} part. At least one unit must contain the other one +% in the \var{implementation} section. +unit_f_cant_compile_unit=10021_F_Nie mona skompilowa moduu $1, brak rde +% A unit was found that needs to be recompiled, but no sources are +% available. +unit_f_cant_find_ppu=10022_F_Nie mona znale moduu $1 +% You tried to use a unit of which the PPU file isn't found by the +% compiler. Check your config files for the unit pathes +unit_w_unit_name_error=10023_W_Nie znaleziono moduu $1 ale istnieje $2 +unit_f_unit_name_error=10024_F_Szukano moduu $1 ale znaleziono tylko $2 +% Dos truncation of 8 letters for unit PPU files +% may lead to problems when unit name is longer than 8 letters. +unit_w_switch_us_missed=10025_W_Kompilowanie moduu System wymaga uycia przecznika -Us +% When recompiling the system unit (it needs special treatment), the +% \var{-Us} must be specified. +unit_f_errors_in_unit=10026_F_Napotkano $1 bdw podczas kompilacji moduu, zatrzymanie +% When the compiler encounters a fatal error or too many errors in a module +% then it stops with this message. +unit_u_load_unit=10027_U_adowanie z $1 ($2) moduu $3 +% When you use the \var{-vu} flag, which unit is loaded from which unit is +% shown. +unit_u_recompile_crc_change=10028_U_Rekompilacja $1, suma kontrolna zmieniona dla $2 +unit_u_recompile_source_found_alone=10029_U_Rekompilacja $1, znaleziono tylko rdo +% When you use the \var{-vu} flag, these messages tell you why the current +% unit is recompiled. +unit_u_recompile_staticlib_is_older=10030_U_Rekompilacja moduu, biblioteka statyczna jest starsza ni plik ppu +% When you use the \var{-vu} flag, the compiler warns if the static library +% of the unit are older than the unit file itself. +unit_u_recompile_sharedlib_is_older=10031_U_Rekompilacja moduu, biblioteka wspdzielona jest starsza ni plik ppu +% When you use the \var{-vu} flag, the compiler warns if the shared library +% of the unit are older than the unit file itself. +unit_u_recompile_obj_and_asm_older=10032_U_Rekompilacja moduu, obj i asm s starsze ni plik ppu +% When you use the \var{-vu} flag, the compiler warns if the assembler or +% object file of the unit are older than the unit file itself. +unit_u_recompile_obj_older_than_asm=10033_U_Rekompilacja moduu, obj jest starszy ni asm +% When you use the \var{-vu} flag, the compiler warns if the assembler +% file of the unit is older than the object file of the unit. +unit_u_parsing_interface=10034_U_Parsowanie czci interface moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% parsing the interface part of the unit +unit_u_parsing_implementation=10035_U_Parsowanie czci implementation moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% parsing the implementation part of the unit +unit_u_second_load_unit=10036_U_Drugie zaadowanie pliku $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% recompiling a unit for the second time. This can happend with interdepend +% units. +unit_u_check_time=10037_U_Sprawdzanie pliku PPU: $1 czas: $2 +% When you use the \var{-vu} flag, the compiler show the filename and +% date and time of the file which a recompile depends on +### The following two error msgs is currently disabled. +#unit_h_cond_not_set_in_last_compile=10038_H_Warunek $1 nie by ustawiony na pocztku ostatniej kompilacji moduu $2 +#% when recompilation of an unit is required the compiler will check that +#% the same conditionals are set for the recompiliation. The compiler has +#% found a conditional that currently is defined, but was not used the last +#% time the unit was compiled. +#unit_h_cond_set_in_last_compile=10039_H_Warunek $1 nie by ustawiony na pocztku ostatniej kompilacji moduu $2 +#% when recompilation of an unit is required the compiler will check that +#% the same conditionals are set for the recompiliation. The compiler has +#% found a conditional that was used the last time the unit was compiled, but +#% the conditional is currently not defined. +unit_w_cant_compile_unit_with_changed_incfile=10040_W_Nie mona skompilowa moduu $1, znaleziono zmodyfikowane pliki include +% A unit was found to have modified include files, but +% some source files were not found, so recompilation is impossible. +unit_h_source_modified=10041_H_Plik $1 jest nowszy ni plik $2 +% A modified source file for a unit was found that was compiled with the +% release flag (-Ur). The unit will not implicitly be recompiled because +% this release flag is set. +unit_u_ppu_invalid_fpumode=10042_U_Uycie moduu skompilowanego z innym formatem zapisu liczb zmiennoprzecinkowych +% Trying to compile code while using units which were not compiled with +% the same floating point format mode. Either all code should be compiled +% with FPU emulation on, or with FPU emulation off. +unit_u_loading_interface_units=10043_U_adowanie moduw z czci interface moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the units defined in the interface part of the unit. +unit_u_loading_implementation_units=10044_U_adowanie moduw z czci implementation moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the units defined in the implementation part of the unit. +unit_u_interface_crc_changed=10045_U_Zmieniona suma CRC sekcji interface moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it the +% CRC calculated for the interface has been changed after the implementation +% has been parsed. +unit_u_implementation_crc_changed=10046_U_Zmieniona suma CRC sekcji implementation moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it the +% CRC calculated has been changed after the implementation +% has been parsed. +unit_u_finished_compiling=10047_U_Zakoczono kompilacj moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has finished compiling the unit. +unit_u_add_depend_to=10048_U_Dodanie zalenoci $1 do $2 +% When you use the \var{-vu} flag, the compiler warns that it +% has added a dependency between the two units. +unit_u_no_reload_is_caller=10049_U_Ominicie przeadowania moduu, to ten sam modu: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has will not reload the unit because it is the unit that wants +% to load this unit +unit_u_no_reload_in_second_compile=10050_U_Ominicie przeadowania moduu, trwa druga kompilacaja: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has will not reload the unit because it is already in a second recompile +unit_u_flag_for_reload=10051_U_Flaga do przeadowania: $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has to reload the unit +unit_u_forced_reload=10052_U_Wymuszone przeadowanie moduu +% When you use the \var{-vu} flag, the compiler warns that it +% has is reloading the unit because it was required +unit_u_previous_state=10053_U_Poprzedni stan moduu $1: $2 +% When you use the \var{-vu} flag, the compiler shows the +% previous state of the unit +unit_u_second_compile_unit=10054_U_Ju kompilowane $1, ustawienie drugiej kompilacji +% When you use the \var{-vu} flag, the compiler warns that it starts +% recompiling a unit for the second time. This can happend with interdepend +% units. +unit_u_loading_unit=10055_U_adowanie moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it starts +% loading the unit. +unit_u_finished_loading_unit=10056_U_Zakoczenie adowania moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it finished +% loading the unit. +unit_u_registering_new_unit=10057_U_Rejestrowanie nowego moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it has +% found a new unit and registers it in the internal lists. +unit_u_reresolving_unit=10058_U_Powtrne odnajdowanie moduu $1 +% When you use the \var{-vu} flag, the compiler warns that it +% has to recalculate the internal data of the unit +unit_u_skipping_reresolving_unit=10059_U_Ominicie powtrnego odnajdowania moduu $1, cigle aduje uywane moduy +% When you use the \var{-vu} flag, the compiler warns that it +% skips to recalculate the internal data of the unit because there +% is no data to recalculate +% \end{description} +# EndOfTeX + +# +# Options +# +# 11039 is the last used one +# +option_usage=11000_O_$1 [opcje] <nazwapliku> [opcje] +# BeginOfTeX +% +% \section{Command-line handling errors} +% This section lists errors that occur when the compiler is processing the +% command line or handling the configuration files. +% \begin{description} +option_only_one_source_support=11001_W_Obsugiwany tylko jeden plik rdowy +% You can specify only one source file on the command line. The first +% one will be compiled, others will be ignored. This may indicate that +% you forgot a \var{'-'} sign. +option_def_only_for_os2=11002_W_Plik DEF moe by stworzony tylko pod OS/2 +% This option can only be specified when you're compiling for OS/2 +option_no_nested_response_file=11003_E_Zagniedenia plikw nieobsugiwane +% you cannot nest response files with the \var{@file} command-line option. +option_no_source_found=11004_F_Brak nazwy pliku w lini polece +% The compiler expects a source file name on the command line. +option_no_option_found=11005_N_Brak opcji w pliku konfiguracyjnym $1 +% The compiler didn't find any option in that config file. +option_illegal_para=11006_E_Nieprawidowy parametr: $1 +% You specified an unknown option. +option_help_pages_para=11007_H_-? wywietla pomoc +% When an unknown option is given, this message is diplayed. +option_too_many_cfg_files=11008_F_Za duo zagniedonych plikw konfiguracyjnych +% You can only nest up to 16 config files. +option_unable_open_file=11009_F_Nie mona otworzy pliku konfiguracyjnego $1 +% The option file cannot be found. +option_reading_further_from=11010_D_Czytanie dalszych opcji z $1 +% Displayed when you have notes turned on, and the compiler switches +% to another options file. +option_target_is_already_set=11011_W_Cel jest ju ustawiony na: $1 +% Displayed if more than one \var{-T} option is specified. +option_no_shared_lib_under_dos=11012_W_Biblioteki wspdzielone nie s obsugiwane w DOSie, reverting to static +% If you specify \var{-CD} for the \dos platform, this message is displayed. +% The compiler supports only static libraries under \dos +option_too_many_ifdef=11013_F_Za duo IF(N)DEF +% the \var{\#IF(N)DEF} statements in the options file are not balanced with +% the \var{\#ENDIF} statements. +option_too_many_endif=11014_F_Za duo ENDIF +% the \var{\#IF(N)DEF} statements in the options file are not balanced with +% the \var{\#ENDIF} statements. +option_too_less_endif=11015_F_Warunek wci otwarty na kocu pliku +% the \var{\#IF(N)DEF} statements in the options file are not balanced with +% the \var{\#ENDIF} statements. +option_no_debug_support=11016_W_Generowanie informacji do debugowania nieobsugiwane przez t wersj kompilatora +% It is possible to have a compiler executable that doesn't support +% the generation of debugging info. If you use such an executable with the +% \var{-g} switch, this warning will be displayed. +option_no_debug_support_recompile_fpc=11017_H_Sprbuj przekompilowa z -dGDB +% It is possible to have a compiler executable that doesn't support +% the generation of debugging info. If you use such an executable with the +% \var{-g} switch, this warning will be displayed. +option_obsolete_switch=11018_E_Uycie przedawnionego przecznika $1 +% this warns you when you use a switch that is not needed/supported anymore. +% It is recommended that you remove the switch to overcome problems in the +% future, when the switch meaning may change. +option_obsolete_switch_use_new=11019_E_Uycie przedawnionego przecznika $1, prosz uy $2 +% this warns you when you use a switch that is not supported anymore. You +% must now use the second switch instead. +% It is recommended that you change the switch to overcome problems in the +% future, when the switch meaning may change. +option_switch_bin_to_src_assembler=11020_N_Przeczenie na domylny zapis asemblera +% this notifies you that the assembler has been changed because you used the +% -a switch which can't be used with a binary assembler writer. +option_incompatible_asm=11021_W_Wybrane wyjcie asemblera "$1" nie jest zgodne z "$2" +option_asm_forced=11022_W_Wymuszenie uycia asemblera "$1" +% The assembler output selected can not generate +% object files with the correct format. Therefore, the +% default assembler for this target is used instead. +option_using_file=11026_T_Czytanie opcji z pliku $1 +% Options are also read from this file +option_using_env=11027_T_Czytanie opcji ze zmiennej rodowiskowej $1 +% Options are also read from this environment string +option_handling_option=11028_D_Obsugiwanie opcji "$1" +% Debug info that an option is found and will be handled +option_help_press_enter=11029__*** nacinij enter *** +option_start_reading_configfile=11030_H_Rozpoczto czytanie pliku konfiguracyjnego $1 +% Starting of config file parsing. +option_end_reading_configfile=11031_H_Zakoczono czytanie pliku konfiguracyjnego $1 +% End of config file parsing. +option_interpreting_option=11032_D_Interpretowanie opcji "$1" +option_interpreting_firstpass_option=11036_D_Interpretowanie opcji "$1" +option_interpreting_file_option=11033_D_Interpretowanie opcji plikowej "$1" +option_read_config_file=11034_D_Czytanie pliku konfiguracyjnego "$1" +option_found_file=11035_D_Znaleziono nazw pliku rdowego "$1" +% Additional infos about options, displayed +% when you have debug option turned on. +option_code_page_not_available=11039_E_Nieznana strona kodowa +%\end{description} +# EndOfTeX + +# +# Logo (option -l) +# +option_logo=11023_[ +Free Pascal Compiler wersja $FPCFULLVERSION [$FPCDATE] dla $FPCCPU +Copyright (c) 1993-2011 by Florian Klaempfl +] + +# +# Info (option -i) +# +option_info=11024_[ +Free Pascal Compiler wersja $FPCVERSION + +Data kompilatora : $FPCDATE +Platforma docelowa: $FPCCPU + +Wspierane platformy: + $OSTARGETS + +Wspierane instrukcje CPU: + $INSTRUCTIONSETS + +Wspierane instrukcje FPU: + $FPUINSTRUCTIONSETS + +Ten program jest oparty na GNU General Public Licence +Przeczytaj COPYING.FPC aby dowiedzie si wicej + +Zgaszanie bdw, sugestii itp. + http://bugs.freepascal.org +lub + bugs@freepascal.org +] + +# +# Help pages (option -? and -h) +# +# The first character on the line indicates who will display this +# line, the current possibilities are : +# * = every target +# 3 = 80x86 targets +# 6 = 680x0 targets +# e = in extended debug mode only +# P = PowerPC targets +# S = Sparc targets +# V = Virtual machine targets +# The second character also indicates who will display this line, +# (if the above character was TRUE) the current possibilities are : +# * = everyone +# g = with GDB info supported by the compiler +# O = OS/2 +# L = UNIX systems +# The third character represents the indentation level. +# +option_help_pages=11025_[ +**0*_wpisz + po przeczniku aby go aktywowa, - aby dezaktywowa +**1a_kompilator nie usuwa wygenerowanego pliku asemblera +**2al_wypisuje numery linii do pliku asemblera +**2an_wypisuje informacje o wzach do pliku asemblera +*L2ap_uycie potokw zamiast tymczasowych plikw asemblera +**2ar_wypisuje alokacje/zwalnianie rejestrw do pliku asemblera +**2at_wypisuje tymczasowe alokacje/zwalnianie do pliku asemblera +**1A<x>_format wyjciowy: +**2Adefault_uycie domylnego asemblera +3*2Aas_asemblacja przy uyciu GNU AS +3*2Anasmcoff_plik coff (Go32v2) przy uyciu Nasm +3*2Anasmelf_plik elf32 (Linux) przy uyciu Nasm +3*2Anasmwin32_plik obj (Win32) przy uyciu Nasm +3*2Anasmwdosx_plik obj (Win32/WDOSX) przy uyciu Nasm +3*2Awasm_plik obj przy uyciu Wasm (Watcom) +3*2Anasmobj_plik obj przy uyciu Nasm +3*2Amasm_plik obj przy uyciu Masm (Microsoft) +3*2Atasm_plik obj przy uyciu Tasm (Borland) +3*2Aelf_bezporedni zapis do pliku elf32 (Linux) +3*2Acoff_bezporedni zapis do pliku coff (Go32v2) +3*2Apecoff_bezporedni zapis do pliku pecoff (Win32) +4*2Aas_asemblacja przy uyciu GNU AS +6*2Aas_o-file (Unix) przy uyciu GNU AS +6*2Agas_asembler GNU Motorola +6*2Amit_skadnia MIT (dawniej GAS) +6*2Amot_standardowy asembler Motorola +A*2Aas_asemblacja przy uyciu GNU AS +P*2Aas_asemblacja przy uyciu GNU AS +S*2Aas_asemblacja przy uyciu GNU AS +**1b_generuje informacje przegldarki +**2bl_generuje informacje o lokalnych symbolach +**1B_budowanie wszystkich moduw +**1C<x>_opcje generacji kodu: +**2Cc<x>_ustawia domylny sposb wywoania funkcji/procedur na <x> +**2CD_tworzenie take bibliotek dynamicznych (niedostpne) +**2Ce_kompilacja z emulowanymi opkodami zmiennoprzecinkowymi +**2Cf<x>_ustawia uywany zbir instrukcji FPU na <x> (uyj "fpc -i", aby zobaczy moliwe wartoci) +**2Cg_generowanie kodu PIC +**2Ch<n>_rozmiar sterty w bajtach (pomidzy 1023 i 67107840) +**2Ci_sprawdzanie operacji wejcia/wyjcia +**2Cn_pominicie etapu linkowania +**2Co_sprawdzanie przepenienia liczb cakowitych +**2Cp<x>_ustawia uywany zbir instrukcji na <x> (uyj "fpc -i", aby zobaczy moliwe wartoci) +**2Cr_sprawdzanie zakresu +**2CR_sprawdzanie poprawnoci wywoywania metod obiektw +**2Cs<n>_ustawienie rozmiar stosu na <n> +**2Ct_sprawdzanie stosu +**2CX_tworzenie bibliotek smartlinked +**1d<x>_zdefiniowanie symbolu <x> +*O1D_generacja pliku DEF +*O2Dd<x>_ustawienie opisu na <x> +**2Dv<x>_ustawienie wersji DLL na <x> +*O2Dw_aplikacja PM +**1e<x>_ustawienie cieki do asemblera i linkera +**1E_to samo co -Cn +**1F<x>_ustawianie nazw i cieek: +**2Fa<x>[,y]_wczytuje <x> (i [y]) zanim zostani wczytane moduy z sekcji USES +**2Fc<x>_ustawienie strony kodowej rde na <x> +**2FD<x>_ustawienie katalogu z narzdziami kompilatora +**2Fe<x>_przekierowanie komunikatw o bdach do pliku <x> +**2FE<x>_ustawienie katalogu dla skompilowanych programw/moduw na <x> +**2Fi<x>_dodanie <x> do cieki include'w +**2Fl<x>_dodanie <x> do cieki bibliotek +**2FL<x>_uycie <x> jako dynamicznego linkera +**2Fo<x>_dodanie <x> do cieki obiektw +**2Fr<x>_adowanie pliku <x> z komunikatami bdw +**2Fu<x>_dodanie <x> do cieki moduw +**2FU<x>_ustawienie katalogu dla skompilowanych moduw, uniewania -FE +*g1g_generacja informacji debuggera: +*g2gc_generacja kodu sprawdzajcego wskaniki +*g2gd_uycie dbx +*g2gg_uycie gsym +*g2gh_uycie moduu ledzenia sterty(do wykrywania wyciekw pamici) +*g2gl_uycie moduu z informacjami o numerach linii programu +*g2gv_generacja kodu moliwego do ledzenia przy pomocy valgrind +*g2gw_generacja informacji debuggera dwarf +**1i_informacje +**2iD_zwraca dat kompilatora +**2iV_zwraca wersj kompilatora +**2iSO_zwraca OS kompilatora +**2iSP_zwraca typ procesora kompilatora +**2iTO_zwraca docelowy OS +**2iTP_zwraca docelowy typ kompilatora +**1I<x>_dodanie <x> do cieki include'w +**1k<x>_podanie <x> do linkera +**1l_wypisanie logo +**1M<x>_ustawia tryb jzyka na <x> +**2Mfpc_dialekt free pascala (domylny) +**2Mobjfpc_wczenie niektrych rozszerze Delphi 2 +**2Mdelphi_kompatybilno z Delphi +**2Mtp_kompatybilno z TP/BP 7.0 +**2Mgpc_kompatybilno z gpc +**2Mmac_kompatybilno z dialektami pascala na Macintosha +**1n_zignorowanie standardowego pliku konfiguracyjnego +**1N<x>optymalizacje wzw drzewa +**2Nu_rozwijanie ptli +**1o<x>_zmiana nazwy skompilowanego programu na <x> +3*1O<x>_optymalizacje: +3*2Og_generacja mniejszego kodu +3*2OG_generacja szybszego kodu (domylne) +3*2Or_trzymanie niektrych zmiennych w rejestrach +3*2Ou_wczenie niepewnych optymalizacji (zobacz w dokumentacji) +3*2O1_optymalizacje pierwszego stopnia (szybkie) +3*2O2_optymalizacje drugiego stopnia (-O1 + wolniejsze) +3*2O3_optymalizacje trzeciego stopnia (powtarzane maksymalnie 5 razy -02) +3*2Op<x>_procesor docelowy: +3*3Op1_ustawienie procesora docelowego na 386/486 +3*3Op2_ustawienie procesora docelowego na Pentium/PentiumMMX (tm) +3*3Op3_ustawienie procesora docelowego na PPro/PII/c6x86/K6 (tm) +6*2Og_generacja mniejszego kodu +6*2OG_generacja szybszego kodu (domylne) +6*2Ox_maksymalne optymalizacje (cigle zawieraj BDY!!!) +6*2O0_ustawia docelowy procesor na MC68000 +6*2O2_ustawia docelowy procesor na MC68020+ (domylne) +**1pg_generacja kodu do profilowania przy pomocy gprof (definiuje FPC_PROFILE) +**1R<x>_styl asemblera uywanego w rdach: +**2Rdefault_uycie domylnego asemblera +3*2Ratt_styl AT&T +3*2Rintel_styl Intel +6*2RMOT_styl Motorola +**1S<x>_opcje skadni: +**2S2_to samo co -Mobjfpc +**2Sc_wspieranie operatorw C (*=,+=,/= oraz -=) +**2Sa_doczanie kodu asercji +**2Sd_to samo co -Mdelphi +**2Se<x>_opcje bdw. <x> jest kombinacj: +**3*_<n> : kompilator zatrzymuje si po <x> bdach (domylnie 1) +**3*_w : kompilator zatrzymuje si take na ostrzeeniach +**3*_n : kompilator zatrzymuje si take na notkach +**3*_h : kompilator zatrzymuje si take na podpowiedziach +**2Sg_zezwolenie na LABEL i GOTO +**2Sh_uycie ansistringw +**2Si_wspieranie INLINE w stylu C++ +**2SI<x>_ustawia styl interfejsw na <x> +**3SIcom_interfejsy kompatybilne z COM (domylne) +**3SIcorba_interfejsy kompatybilne z CORBA +**2Sm_wspieranie makr jak w C (opcja globalna) +**2So_to samo co -Mtp +**2Sp_to samo co -Mgpc +**2Ss_konstruktory musz mie nazw init (destruktory - done) +**1s_pominicie wywoania asemblera i linkera +**2sh_generacja skryptu do linkowania na hocie +**2st_generacja skryptu do linkowania na celu +**2sr_ominicie fazy alokowania rejestrw (uywaj z -alr) +**1T<x>_docelowy system operacyjny: +3*2Temx_OS/2 na EMX (wliczajc EMX/RSX extender) +3*2Tfreebsd_FreeBSD +3*2Tgo32v2_DJ Delorie DOS extender - wersja 2 +3*2Tlinux_Linux +3*2Tnetbsd_NetBSD +3*2Tnetware_Novell Netware Module (clib) +3*2Tnetwlibc_Novell Netware Module (libc) +3*2Topenbsd_OpenBSD +3*2Tos2_OS/2 / eComStation +3*2Tsunos_SunOS/Solaris +3*2Twatcom_DOS extendery zgodne z Watcomem +3*2Twdosx_WDOSX DOS extender +3*2Twin32_32-bitowy Windows +4*2Tlinux_Linux +6*2Tamiga_Commodore Amiga +6*2Tatari_Atari ST/STe/TT +6*2Tlinux_Linux-68k +6*2Tmacos_Macintosh m68k (nie wspierane) +6*2Tpalmos_PalmOS +A*2Tlinux_Linux +P*2Tdarwin_Darwin i MacOS X na PowerPC +P*2Tlinux_Linux na PowerPC +P*2Tmacos_MacOS (klasyczny) na PowerPC +P*2Tmorphos_MorphOS +S*2Tlinux_Linux +**1u<x>_usunicie symbolu <x> +**1U_opcje moduw: +**2Un_pominicie sprawdzania nazwy moduu +**2Ur_generacja moduu do wydania (release) +**2Us_kompilacja moduu system +**1v<x>_obszerne opisy. <x> jest kombinacj nastpujcych liter i cyfr: +**2*_e : pokazuje bdy (domylne) 0 : nic nie pokazuje (oprcz bdw) +**2*_w : pokazuje ostrzeenia u : pokazuje informacje o moduach +**2*_n : pokazuje notki t : pokazuje prbowane/uyte pliki +**2*_h : pokazuje podpowiedzi c : pokazuje warunki +**2*_i : pokazuje oglne informacje d : pokazuje informacje debugowania +**2*_l : pokazuje numery lini r : tryb kompatybilnoci z Rhide/GCC +**2*_a : pokazuje wszystko x : informacje o pliku exe (tylko Win32) +**2*_v : zapisuje plik fpcdebug.txt p : zapisuje tree.log z drzewem +**2*_ z du iloci informacji parsowania +3*1W<x>_opcje dla Win32 i podobnych +3*2WB_tworzenie relokacyjnego obrazu +3*2WB<x>_ustawienie bazy obrazu na szesnastkow warto <x> +3*2WC_aplikacja konsolowa +3*2WD_uycie DEFFILE do eksportu funkcji z DLLa lub EXE +3*2WF_aplikacja penoekranowa (tylko OS/2) +3*2WG_aplikacja graficzna +3*2WN_nie generuje kodu relokacji (potrzebne do debugowania) +3*2WR_generuje kod relokacji +P*2WC_aplikacja konsolowa (tylko MacOS) +P*2WG_aplikacja graficzna (tylko MacOS) +P*2WT_aplikacja narzdziowa (narzdzie MPW, tylko MacOS) +**1X_opcje plikw wykonywalnych: +**2Xc_podaje --shared do linkera (tylko Unix) +**2Xd_nie uywa standardowej cieki bibliotek (potrzebne do cross-kompilacji) +**2XD_linkowanie dynamiczne (definiuje FPC_LINK_DYNAMIC) +**2Xm_generuje link map +**2XM<x>_ustawia nazw gwnego bloku programu (domylnie 'main') +**2XP<x>_poprzedza nazw binutils tekstem <x> +**2Xr<x>_ustawia ciek bibliotek na <x> (potrzebne do cross-kompilacji) +**2Xs_wycicie wszystkich symboli z pliku +**2XS_linkowanie statycznie (domylne)(definiuje FPC_LINK_STATIC) +**2Xt_linkuje z bibliotekami statycznymi (podaje -static do linkera) +**2XX_linkowanie smart (definiuje FPC_LINK_SMART) +**1*_ +**1?_pokazanie pomocy +**1h_pokazanie pomocy bez zatrzymywania +] + +# +# The End... |