# # This file is part of the Free Pascal Compiler # Copyright (c) 1993-2020 by the Free Pascal Development team # # Catalan Language File for Free Pascal # # See the file COPYING.v2, included in this distribution, # for details about the copyright. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # # CodePage 1252 # # The constants are build in the following order: # __ # # is the part of the compiler the message is used # asmr_ assembler parsing # asmw_ assembler writing/binary writers # unit_ unit handling # scan_ scanner # parser_ parser # type_ type checking # general_ general info # exec_ calls to assembler, linker, binder # # the type of the message it should normally used for # f_ fatal error # e_ error # w_ warning # n_ note # h_ hint # i_ info # l_ add linenumber # u_ used # t_ tried # c_ conditional # d_ debug message # x_ executable informations # # # General # # 01017 is the last one used # # BeginOfTeX % \section{General compiler messages} % This section gives the compiler messages which are not fatal, but which % display useful information. The number of such messages can be % controlled with the various verbosity level \var{-v} switches. % \begin{description} general_t_compilername=01000_T_Compilador: $1 % When the \var{-vt} switch is used, this line tells you what compiler % is used. general_d_sourceos=01001_D_SO d'origen: $1 % When the \var{-vd} switch is used, this line tells you what the source % operating system is. general_i_targetos=01002_I_SO objectiu: $1 % When the \var{-vd} switch is used, this line tells you what the target % operating system is. general_t_exepath=01003_T_S'està utilitzant el camí pels executables: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for its binaries. general_t_unitpath=01004_T_S'està utilitzant el camí de les unitats: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for compiled units. You can set this path with the \var{-Fu} general_t_includepath=01005_T_S'està utilitzant el camí dels inclosos: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for its include files (files used in \var{\{\$I xxx\}} statements). % You can set this path with the \var{-I} option. general_t_librarypath=01006_T_S'està utilitzant el camí per les biblioteques : $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for the libraries. You can set this path with the \var{-Fl} option. general_t_objectpath=01007_T_S'està utilitzant el camí dels objectes: $1 % When the \var{-vt} switch is used, this line tells you where the compiler % looks for object files you link in (files used in \var{\{\$L xxx\}} statements). % You can set this path with the \var{-Fo} option. general_i_abslines_compiled=01008_I_$1 Línies compilades, $2 seg % When the \var{-vi} switch is used, the compiler reports the number % of lines compiled, and the time it took to compile them (real time, % not program time). general_f_no_memory_left=01009_F_No hi ha prou memòria disponible % The compiler doesn't have enough memory to compile your program. % There are several remedies for this: % \begin{itemize} % \item If you're using the build option of the compiler, try compiling the % different units manually. % \item If you're compiling a huge program, split it up in units, and compile % these separately. % \item If the previous two don't work, recompile the compiler with a bigger % heap (you can use the \var{-Ch} option for this, \seeo{Ch}) % \end{itemize} general_i_writingresourcefile=01010_I_S'està escrivint el fitxer de la taula del recurs: $1 % This message is shown when the compiler writes the Resource String Table % file containing all the resource strings for a program. general_e_errorwritingresourcefile=01011_E_S'ha produït un error mentre s'escrivia el fitxer de la taula del recurs: $1 % This message is shown when the compiler encountered an error when writing % the Resource String Table file general_i_fatal=01012_I_Fatal: % Prefix for Fatal Errors general_i_error=01013_I_Error: % Prefix for Errors general_i_warning=01014_I_Avís: % Prefix for Warnings general_i_note=01015_I_Nota: % Prefix for Notes general_i_hint=01016_I_Suggeriment: % Prefix for Hints general_e_path_does_not_exist=01017_E_El camí "$1" no existeix % The specified path does not exist general_e_compilation_aborted=01018_E_S'ha avortat la compilació % \end{description} # # Scanner # # 02066 is the last used one # % \section{Scanner messages.} % This section lists the messages that the scanner emits. The scanner takes % care of the lexical structure of the pascal file, i.e. it tries to find % reserved words, strings, etc. It also takes care of directives and % conditional compiling handling. % \begin{description} scan_f_end_of_file=02000_F_No s'esperava el final del fitxer % this typically happens in one of the following cases : % \begin{itemize} % \item The source file ends before the final \var{end.} statement. % This happens mostly when the \var{begin} and \var{end} statements aren't % balanced; % \item An include file ends in the middle of a statement. % \item A comment was not closed. % \end{itemize} scan_f_string_exceeds_line=02001_F_La cadena excedeix la línia % There is a missing closing 'in a string, so it occupies % multiple lines. scan_f_illegal_char=02002_F_Caràcter il·legal "$1" ($2) % An illegal character was encountered in the input file. scan_f_syn_expected=02003_F_S'ha trobat un error de sintaxi, s'esperava "$1" però s'ha trobat "$2" % This indicates that the compiler expected a different token than % the one you typed. It can occur almost everywhere where you make a % mistake against the pascal language. scan_t_start_include_file=02004_TL_S'està començant a llegir el fitxer inclòs $1 % When you provide the \var{-vt} switch, the compiler tells you % when it starts reading an included file. scan_w_comment_level=02005_W_S'ha trobat nivell de comentari $1 % When the \var{-vw} switch is used, then the compiler warns you if % it finds nested comments. Nested comments are not allowed in Turbo Pascal % and can be a possible source of errors. scan_n_ignored_switch=02008_N_S'ignora el commutador del compilador "$1" % With \var{-vn} on, the compiler warns if it ignores a switch scan_w_illegal_switch=02009_W_El commutador del compilador $1 no és vàlid % You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler % does not recognise. scan_w_switch_is_global=02010_W_Falta el commutador d'efecte global % The compiler switch is misplaced, and should be located at % the start of the unit or program scan_e_illegal_char_const=02011_E_Constant de caràcter il·legal % This happens when you specify a character with its ASCII code, as in % \var{\#96}, but the number is either illegal, or out of range. scan_f_cannot_open_input=02012_F_No es pot obrir el fitxer "$1" % \fpc cannot find the program or unit source file you specified on the % command line. scan_f_cannot_open_includefile=02013_F_No es pot obrir el fitxer inclòs "$1" % \fpc cannot find the source file you specified in a \var{\{\$include..\}} % statement. scan_w_only_pack_records=02015_W_Els camps dels Registres només es poden alinear a 1,2,4 o 16 octets % You are specifying the \var{\{\$PACKRECORDS n\} } with an illegal value for % \var{n}. Only 1,2,4 or 16 are valid in this case. scan_w_only_pack_enum=02016_W_Els enumerats només es poden desar en 1,2 o 4 octets % You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for % \var{n}. Only 1,2 or 4 are valid in this case. scan_e_endif_expected=02017_E_S'esperava $ENDIF per $1, s'ha definit $2 en $3 a la línia $4 % Your conditional compilation statements are unbalanced. scan_e_preproc_syntax_error=02018_E_S'ha trobat un error de sintaxi mentre es processava una expressió de compilació condicional % There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setcd % compiler directives. scan_e_error_in_preproc_expr=02019_E_S'ha produït un error mentre s'avaluava una expressió de compilació condicional % There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc % compiler directives. scan_w_macro_cut_after_255_chars=02020_W_Els continguts de la macro estan limitats a una longitud de 255 caràcters % The contents of macros cannot be longer than 255 characters. scan_e_endif_without_if=02021_E_ENDIF sense IF(N)DEF % Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced. scan_f_user_defined=02022_F_L'usuari ha definit: $1 % A user defined fatal error occurred. see also the \progref scan_e_user_defined=02023_E_L'usuari ha definit: $1 % A user defined error occurred. see also the \progref scan_w_user_defined=02024_W_L'usuari ha definit: $1 % A user defined warning occurred. see also the \progref scan_n_user_defined=02025_N_L'usuari ha definit: $1 % A user defined note was encountered. see also the \progref scan_h_user_defined=02026_H_L'usuari ha definit: $1 % A user defined hint was encountered. see also the \progref scan_i_user_defined=02027_I_L'usuari ha definit: $1 % User defined information was encountered. see also the \progref scan_e_keyword_cant_be_a_macro=02028_E_La paraula clau redefinida com a macro no té efecte % You cannot redefine keywords with macros. scan_f_macro_buffer_overflow=02029_F_Una macroinstrucció ha desbordat la memòria intermèdia mentre es llegia o s'expandia % Your macro or its result was too long for the compiler. scan_w_macro_too_deep=02030_W_L'expansió de les macroinstruccions excedeix una profunditat de 16. % When expanding a macro, macros have been nested to a level of 16. % The compiler will expand no further, since this may be a sign that % recursion is used. scan_w_wrong_styled_switch=02031_W_No es permeten els commutadors del compilador en comentaris de l'estil // % Compiler switches should be in normal pascal style comments scan_d_handling_switch=02032_DL_Manejant el commutador "$1" % When you set debugging info on (\var{-vd}) the compiler tells you when it % is evaluating conditional compile statements. scan_c_endif_found=02033_CL_S'ha trobat ENDIF $1 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifdef_found=02034_CL_S'ha trobat IFDEF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifopt_found=02035_CL_S'ha trobat IFOPT $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_if_found=02036_CL_S'ha trobat IF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_ifndef_found=02037_CL_S'ha trobat IFNDEF $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_else_found=02038_CL_S'ha trobat ELSE $1, $2 % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements. scan_c_skipping_until=02039_CL_S'ha omès fins ... % When you turn on conditional messages(\var{-vc}), the compiler tells you % where it encounters conditional statements, and whether it is skipping or % compiling parts. scan_i_press_enter=02040_I_Premeu per a continuar % When the \var{-vi} switch is used, the compiler stops compilation % and waits for the \var{Enter} key to be pressed when it encounters % a \var{\{\$STOP\}} directive. scan_w_unsupported_switch=02041_W_No es permet l'ús del commutador "$1" % When warnings are turned on (\var{-vw}) the compiler warns you about % unsupported switches. This means that the switch is used in Delphi or % Turbo Pascal, but not in \fpc scan_w_illegal_directive=02042_W_La directiva del compilador "$1" no és vàlida % When warings are turned on (\var{-vw}) the compiler warns you about % unrecognised switches. For a list of recognised switches, \progref scan_t_back_in=02043_TL_S'està tornant a $1 % When you use (\var{-vt}) the compiler tells you when it has finished % reading an include file. scan_w_unsupported_app_type=02044_W_El tipus de l'aplicació "$1" no és compatible % You get this warning, if you specify an unknown application type % with the directive \var{\{\$APPTYPE\}} scan_w_app_type_not_support=02045_W_APPTYPE no és compatible amb el SO objectiu % The \var{\{\$APPTYPE\}} directive is supported by certain operanting % systems only. scan_w_description_not_support=02046_W_DESCRIPTION no és compatible amb el SO objectiu % The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS scan_n_version_not_support=02047_N_VERSION no és compatible amb el SO objectiu % The \var{\{\$VERSION\}} directive is not supported on this target OS. scan_n_only_exe_version=02048_N_VERSION només es pot utilitzar en executables o DLLs % The \var{\{\$VERSION\}} directive is only used for executable or DLL sources. scan_w_wrong_version_ignored=02049_W_Format erroni de la directiva VERSION "$1" % The \var{\{\$VERSION\}} directive format is major_version.minor_version % where major_version and minor_version are words. scan_e_unsupported_asmmode_specifier=02050_E_L'estil d'assemblador especificat "$1" no és vàlid % When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} % the compiler didn't recognize the mode you specified. scan_w_no_asm_reader_switch_inside_asm=02051_W_No es permet el commutador de lector d'ASM dins d'una declaració ASM, "$1" serà efectiu a continuació % It is not possible to switch from one assembler reader to another % inside an assembler block. The new reader will be used for next % assembler statements only. scan_e_wrong_switch_toggle=02052_E_El modificador del commutador és erroni, utilitzeu ON/OFF o +/- % You need to use ON or OFF or a + or - to toggle the switch scan_e_resourcefiles_not_supported=02053_E_No es permet l'ús dels fitxers del recurs en aquest destí % The target you are compiling for doesn't support resource files. scan_w_include_env_not_found=02054_W_No s'ha trobat la variable d'entorn "$1" % The included environment variable can't be found in the environment, it will % be replaced by an empty string instead. scan_e_invalid_maxfpureg_value=02055_E_El valor pel límit del registre FPU no és vàlid % Valid values for this directive are 0..8 and NORMAL/DEFAULT scan_w_only_one_resourcefile_supported=02056_W_Aquest destí només permet un fitxer d'origen % The target you are compiling for supports only one resource file. % The first resource file found is used, the others are discarded. scan_w_macro_support_turned_off=02057_W_El suport per a macroinstruccions està aturat % A macro declaration has been found, but macro support is currently off, % so the declaration will be ignored. To turn macro support on, compile with % -Sm on the commandline or add {\$MACRO ON\} in the source scan_e_invalid_interface_type=02058_E_S'ha especificat un tipus d'interfície no vàlida. Les interfícies vàlides son : COM, CORBA o DEFAULT. % The interface type that was specified is not supported scan_w_appid_not_support=02059_W_APPID només funciona amb el PalmOS % The \var{\{\$APPID}} directive is only supported for the PalmOS target. scan_w_appname_not_support=02060_W_APPNAME només funciona amb el PalmOS % The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target scan_e_string_exceeds_255_chars=02061_E_Les constants de cadena no poden excedir els 255 caràcters % A single string contant can contain at most 255 chars. Try splitting up the % string in multiple smaller parts and concatenate them with a + operator. scan_f_include_deep_ten=02062_F_Els fitxers inclosos superen els 16 niats % When including include files the files have been nested to a level of 16 % The compiler will expand no further, since this may be a sign that % recursion is used scan_e_too_many_push=02063_E_S'han trobat massa nivells de PUSH % A maximum of 20 levels is allowed. This error occurs only in mode MacPas scan_e_too_many_pop=02064_E_S'ha trobat POP sense PUSH anterior % This error occurs only in mode MacPas scan_e_error_macro_lacks_value=02065_E_La macroinstrucció o variable del temps de compilació "$1" no te cap valor % Thus the conditional compile time expression cannot be evaluated. scan_e_wrong_switch_toggle_default=02066_E_La posició del commutador és errònia, utilitzeu ON/OFF/DEFAULT o +/-/* % You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch scan_e_mode_switch_not_allowed=02067_E_Aquí no es permet el commutador de mode "$1" % A mode switch has already been encountered, or, in case of option -Mmacpas, % a mode switch occur after UNIT scan_e_error_macro_undefined=02068_E_La variable de temps de compilació "$1" no està definida % Thus the conditional compile time expression cannot be evaluated. % \end{description} # # Parser # # 03211 is the last used one # % \section{Parser messages} % This section lists all parser messages. The parser takes care of the % semantics of you language, i.e. it determines if your pascal constructs % are correct. % \begin{description} % \section{Parser messages} parser_e_syntax_error=03000_E_Analitzador - Error de sintaxi % An error against the Turbo Pascal language was encountered. This happens % typically when an illegal character is found in the sources file. parser_e_dont_nest_interrupt=03004_E_El procediment INTERRUPT no pot estar niat % An \VAR{INTERRUPT} procedure must be global. parser_w_proc_directive_ignored=03005_W_S'ignora el tipus de procediment "$1" % The specified is ignored fy FPC programs parser_e_no_overload_for_all_procs=03006_E_No totes les declaracions de "$1" s'han declarat amb OVERLOAD % When you want to use overloading using the \var{OVERLOAD} directive, then % all declarations need to have \var{OVERLOAD} specified. parser_e_export_name_double=03008_E_El nom de la funció exportada "$1" està dupllicat % Exported function names inside a specific DLL must all be different parser_e_export_ordinal_double=03009_E_L'índex de la funció exportada $1 no pot estar duplicat % Exported function names inside a specific DLL must all be different parser_e_export_invalid_index=03010_E_L'índex de la funció exportada no és vàlid % DLL function index must be in the range \var{1..\$FFFF} parser_w_parser_reloc_no_debug=03011_W_L'informació de la depuració de la biblioteca reassignada o executable $1 no funciona, es deshabilita. parser_w_parser_win32_debug_needs_WN=03012_W_Per permetre la depuració pel codi de win32, necessiteu deshabilitar la reassignació amb l'opció -WN % Stabs info is wrong for relocatable DLL or EXES use -WN % if you want to debug win32 executables. parser_e_constructorname_must_be_init=03013_E_El nom del constructor ha de ser INIT % You are declaring a constructor with a name which is not \var{init}, and the % \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). parser_e_destructorname_must_be_done=03014_E_El nom del destructor ha de ser DONE % You are declaring a constructor with a name which is not \var{done}, and the % \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}). parser_e_proc_inline_not_supported=03016_E_No es permet l'ús del procediment tipus INLINE % You tried to compile a program with C++ style inlining, and forgot to % specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++ % styled inlining by default. parser_w_constructor_should_be_public=03018_W_El constructor ha de ser públic % Constructors must be in the 'public' part of an object (class) declaration. parser_w_destructor_should_be_public=03019_W_El destructor ha de ser públic % Destructors must be in the 'public' part of an object (class) declaration. parser_n_only_one_destructor=03020_N_La classe només ha de tenir un destructor % You can declare only one destructor for a class. parser_e_no_local_objects=03021_E_No es permeten les definicions de les classes locals % Classes must be defined globally. They cannot be defined inside a % procedure or function parser_f_no_anonym_objects=03022_F_No es permeten les definicions de classe anònimes % An invalid object (class) declaration was encountered, i.e. an % object or class without methods that isn't derived from another object or % class. For example: % \begin{verbatim} % Type o = object % a : longint; % end; % \end{verbatim} % will trigger this error. parser_n_object_has_no_vmt=03023_E_L'objecte "$1" no té VMT % This is a note indicating that the declared object has no % virtual method table parser_e_illegal_parameter_list=03024_E_La llista dels paràmetres no és vàlida % You are calling a function with parameters that are of a different type than % the declared parameters of the function. parser_e_wrong_parameter_size=03026_E_S'ha especificat una quantitat errònia de paràmetres % There is an error in the parameter list of the function or procedure, % the number of parameters is not correct. parser_e_overloaded_no_procedure=03027_E_L'identificador sobrecarregat "$1" no és una funció % The compiler encountered a symbol with the same name as an overloaded % function, but it is not a function it can overload. parser_e_overloaded_have_same_parameters=03028_E_Les funcions sobrecarregades tenen la mateixa llista de paràmetres % You're declaring overloaded functions, but with the same parameter list. % Overloaded function must have at least 1 different parameter in their % declaration. parser_e_header_dont_match_forward=03029_E_L'encapçalament de la funció no concorda amb la declaració posterior "$1" % You declared a function with same parameters but % different result type or function specifiers. parser_e_header_different_var_names=03030_E_L'encapçalament de la funció "$1" no concorda amb la posterior declaració : el nom de la variable canvia $2 => $3 % You declared the function in the \var{interface} part, or with the % \var{forward} directive, but define it with a different parameter list. parser_n_duplicate_enum=03031_N_Els valors en tipus d'enumerats han de ser ascendents % \fpc allows enumeration constructions as in C. Given the following % declaration two declarations: % \begin{verbatim} % type a = (A_A,A_B,A_E:=6,A_UAS:=200); % type a = (A_A,A_B,A_E:=6,A_UAS:=4); % \end{verbatim} % The second declaration would produce an error. \var{A\_UAS} needs to have a % value higher than \var{A\_E}, i.e. at least 7. parser_e_no_with_for_variable_in_other_segments=03033_E_No es pot utilitzar WITH per les variables en un segment diferent % With stores a variable locally on the stack, % but this is not possible if the variable belongs to another segment. parser_e_too_much_lexlevel=03034_E_El niat de les funcions és superior a 31 % You can nest function definitions only 31 times. parser_e_range_check_error=03035_E_S'ha produït un error de comprovació de l'abast mentre s'avaluaven les constants % The constants are out of their allowed range. parser_w_range_check_error=03036_W_S'ha produït un error de comprovació de l'abast mentre s'avaluaven les constants % The constants are out of their allowed range. parser_e_double_caselabel=03037_E_L'etiqueta de CASE està duplicada % You are specifying the same label 2 times in a \var{case} statement. parser_e_case_lower_less_than_upper_bound=03038_E_El límit superior de CASE és menor que el límit inferior % The upper bound of a \var{case} label is less than the lower bound and this % is useless parser_e_type_const_not_possible=03039_E_No es permeten les constants amb tipus de les classes % You cannot declare a constant of type class or object. parser_e_no_overloaded_procvars=03040_E_No es permeten les funcions variables de les funcions sobrecarregades % You are trying to assign an overloaded function to a procedural variable. % This is not allowed. parser_e_invalid_string_size=03041_E_La longitud d'una cadena ha de ser un valor entre 1 i 255 % The length of a shortstring in Pascal is limited to 255 characters. You are % trying to declare a string with length lower than 1 or greater than 255 parser_w_use_extended_syntax_for_objects=03042_W_Utilitzeu la sintaxi estesa de DISPOSE i NEW per les instàncies dels objectes % If you have a pointer \var{a} to a class type, then the statement % \var{new(a)} will not initialize the class (i.e. the constructor isn't % called), although space will be allocated. you should issue the % \var{new(a,init)} statement. This will allocate space, and call the % constructor of the object. parser_w_no_new_dispose_on_void_pointers=03043_W_L'utilització de NEW o DISPOSE en punters sense tipus no té sentit parser_e_no_new_dispose_on_void_pointers=03044_E_L'utilització de NEW o DISPOSE no és possible amb punters sense tipus % You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer % because no size is associated to an untyped pointer. % Accepted for compatibility in \var{tp} and \var{delphi} modes. parser_e_class_id_expected=03045_E_S'esperava un identificador de classe % This happens when the compiler scans a procedure declaration that contains % a dot, % i.e., a object or class method, but the type in front of the dot is not % a known type. parser_e_no_type_not_allowed_here=03046_E_Aquí no es permet l'identificador de tipus % You cannot use a type inside an expression. parser_e_methode_id_expected=03047_E_S'esperava un identificador del mètode % This identifier is not a method. % This happens when the compiler scans a procedure declaration that contains % a dot, i.e., a object or class method, but the procedure name is not a % procedure of this type. parser_e_header_dont_match_any_member=03048_E_L'encapçalament de la funció no concorda amb cap mètode d'aquesta classe "$1" % This identifier is not a method. % This happens when the compiler scans a procedure declaration that contains % a dot, i.e., a object or class method, but the procedure name is not a % procedure of this type. parser_d_procedure_start=03049_DL_PROCEDURE/FUNCTION $1 % When using the \var{-vd} switch, the compiler tells you when it starts % processing a procedure or function implementation. parser_e_error_in_real=03050_E_La constant de punt flotant no és vàlida % The compiler expects a floating point expression, and gets something else. parser_e_fail_only_in_constructor=03051_E_FAIL només es pot utilitzar en constructors % You are using the \var{fail} keyword outside a constructor method. parser_e_no_paras_for_destructor=03052_E_Els destructors no poden tenir paràmetres % You are declaring a destructor with a parameter list. Destructor methods % cannot have parameters. parser_e_only_class_methods_via_class_ref=03053_E_Els mètodes de la classe només es poden referir amb referències de classe % This error occurs in a situation like the following: % \begin{verbatim} % Type : % Tclass = Class of Tobject; % % Var C : TClass; % % begin % ... % C.free % \end{verbatim} % \var{Free} is not a class method and hence cannot be called with a class % reference. parser_e_only_class_methods=03054_E_Només els mètodes de la classe poden ser accedits en mètodes de classe % This is related to the previous error. You cannot call a method of an object % from a inside a class method. The following code would produce this error: % \begin{verbatim} % class procedure tobject.x; % % begin % free % \end{verbatim} % Because free is a normal method of a class it cannot be called from a class % method. parser_e_case_mismatch=03055_E_Els tipus d'una constant i CASE no concorden % One of the labels is not of the same type as the case variable. parser_e_illegal_symbol_exported=03056_E_No es pot exportar el símbol d'una biblioteca % You can only export procedures and functions when you write a library. You % cannot export variables or constants. parser_w_should_use_override=03057_W_ "$1" està amagant un mètode heretat % A method that is declared \var{virtual} in a parent class, should be % overridden in the descendent class with the \var{override} directive. If you % don't specify the \var{override} directive, you will hide the parent method; % you will not override it. parser_e_nothing_to_be_overridden=03058_E_No hi ha un mètode en una classe avantpassada per ser substituït: "$1" % You are trying to \var{override} a virtual method of a parent class that does % not exist. parser_e_no_procedure_to_access_property=03059_E_No s'ha subministrat un membre per accedir a la propietat % You specified no \var{read} directive for a property. parser_w_stored_not_implemented=03060_W_La directiva Stored encara no està implementada % The \var{stored} directive is not yet implemented parser_e_ill_property_access_sym=03061_E_El símbol per accedir a la propietat no és vàlid % There is an error in the \var{read} or \var{write} directives for an array % property. When you declare an array property, you can only access it with % procedures and functions. The following code woud cause such an error. % \begin{verbatim} % tmyobject = class % i : integer; % property x [i : integer]: integer read I write i; % \end{verbatim} % parser_e_cant_access_protected_member=03062_E_Aquí no es pot accedir a un camp protegit d'un objecte % Fields that are declared in a \var{protected} section of an object or class % declaration cannot be accessed outside the module wher the object is % defined, or outside descendent object methods. parser_e_cant_access_private_member=03063_E_Aquí no es pot accedir a un camp privat d'un objecte % Fields that are declared in a \var{private} section of an object or class % declaration cannot be accessed outside the module where the class is % defined. parser_e_overridden_methods_not_same_ret=03066_E_Els mètodes sobrecarregats han de retornar el mateix tipus: "$2" està sobrecarregat per "$1", el qual retorna un altre tipus % If you declare overridden methods in a class definition, they must % have the same return type. parser_e_dont_nest_export=03067_E_Les funcions declarades amb EXPORT no poden estar niades % You cannot declare a function or procedure within a function or procedure % that was declared as an export procedure. parser_e_methods_dont_be_export=03068_E_Els mètodes no poden ser EXPORTats % You cannot declare a procedure that is a method for an object as % \var{export}ed. parser_e_call_by_ref_without_typeconv=03069_E_Les trucades per paràmetres variables tenen que concordar exactament: s'ha obtingut "$1", s'esperava "$2" % When calling a function declared with \var{var} parameters, the variables in % the function call must be of exactly the same type. There is no automatic % type conversion. parser_e_no_super_class=03070_E_La classe no és un pare de la classe actual % When calling inherited methods, you are trying to call a method of a non-related % class. You can only call an inherited method of a parent class. parser_e_self_not_in_method=03071_E_SELF només és permet en mètodes % You are trying to use the \var{self} parameter outside an object's method. % Only methods get passed the \var{self} parameters. parser_e_generic_methods_only_in_methods=03072_E_Els mètodes només poden estar en altres mètodes cridats directament amb l'identificador del tipus de la classe % A construction like \var{sometype.somemethod} is only allowed in a method. parser_e_illegal_colon_qualifier=03073_E_Ús no vàlid de ":" % You are using the format \var{:} (colon) 2 times on an expression that % is not a real expression. parser_e_illegal_set_expr=03074_E_S'ha produït un error de comprovació de l'abast en el constructor del conjunt o hi ha element del conjunt duplicat % The declaration of a set contains an error. Either one of the elements is % outside the range of the set type, either two of the elements are in fact % the same. parser_e_pointer_to_class_expected=03075_E_S'esperava un punter a un objecte % You specified an illegal type in a \var{New} statement. % The extended syntax of \var{New} needs an object as a parameter. parser_e_expr_have_to_be_constructor_call=03076_E_L'expressió ha de ser una trucada al constructor % When using the extended syntax of \var{new}, you must specify the constructor % method of the object you are trying to create. The procedure you specified % is not a constructor. parser_e_expr_have_to_be_destructor_call=03077_E_L'expressió ha de ser una trucada al destructor % When using the extended syntax of \var{dispose}, you must specify the % destructor method of the object you are trying to dispose of. % The procedure you specified is not a destructor. parser_e_invalid_record_const=03078_E_L'ordre dels elements del registre no és correcte % When declaring a constant record, you specified the fields in the wrong % order. parser_e_false_with_expr=03079_E_El tipus de l'expressió ha de ser CLASS o RECORD % A \var{with} statement needs an argument that is of the type \var{record} % or \var{class}. You are using \var{with} on an expression that is not of % this type. parser_e_void_function=03080_E_Els procediments no poden retornar cap valor % In \fpc, you can specify a return value for a function when using % the \var{exit} statement. This error occurs when you try to do this with a % procedure. Procedures cannot return a value. parser_e_only_methods_allowed=03081_E_Els constructors, destructors i class operators han de ser mètodes % You're declaring a procedure as destructor, constructor or class operator, when the % procedure isn't a class method. parser_e_operator_not_overloaded=03082_E_L'operador no està sobrecarregat % You're trying to use an overloaded operator when it is not overloaded for % this type. parser_e_no_such_assignment=03083_E_No es pot sobrecarregar l'assignació per tipus iguals % You can not overload assignment for types % that the compiler considers as equal. parser_e_overload_impossible=03084_E_No es pot sobrecarregar l'operador % The combination of operator, arguments and return type are % incompatible. parser_e_no_reraise_possible=03085_E_Aquí no es pot rellançar una excepció % You are trying to raise an exception where it is not allowed. You can only % raise exceptions in an \var{except} block. parser_e_no_new_or_dispose_for_classes=03086_E_No es permet la sintaxi estesa de NEW o DISPOSE en una classe % You cannot generate an instance of a class with the extended syntax of % \var{new}. The constructor must be used for that. For the same reason, you % cannot call \var{dispose} to de-allocate an instance of a class, the % destructor must be used for that. parser_e_procedure_overloading_is_off=03088_E_La sobrecàrrega de procediments no està activada % When using the \var{-So} switch, procedure overloading is switched off. % Turbo Pascal does not support function overloading. parser_e_overload_operator_failed=03089_E_No es pot sobrecarregar aquest operador % You are trying to overload an operator which cannot be overloaded. % The following operators can be overloaded : % \begin{verbatim} % +, -, *, /, =, >, <, <=, >=, is, as, in, **, := % \end{verbatim} parser_e_comparative_operator_return_boolean=03090_E_L'operador comparatiu ha de retornar un valor booleà % When overloading the \var{=} operator, the function must return a boolean % value. parser_e_only_virtual_methods_abstract=03091_E_Només els mètodes virtuals poden ser abstractes % You are declaring a method as abstract, when it is not declared to be % virtual. parser_f_unsupported_feature=03092_F_S'està fent ús d'una característica no permesa! % You're trying to force the compiler into doing something it cannot do yet. parser_e_mix_of_classes_and_objects=03093_E_No es permet la barreja de diferents tipus d'objectes (class, object, interface, etc) % You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and % \var{interfaces} interttwined . E,g. % a class cannot have an object as parent and vice versa. parser_w_unknown_proc_directive_ignored=03094_W_Es desconeix la directiva del procediment "$1", s'ignora. parser_e_absolute_only_one_var=03095_E_Absolute només es pot associar a una variable % The procedure direcive you specified is unknown. % You cannot specify more than one variable before the \var{absolute} directive. % Thus, the following construct will provide this error: % \begin{verbatim} % Var Z : Longint; % X,Y : Longint absolute Z; % \end{verbatim} % \item [ absolute can only be associated a var or const ] % The address of a \var{absolute} directive can only point to a variable or a % typed constant. Therefore, the following code will produce this error: % \begin{verbatim} % Procedure X; % % var p : longint absolute x; % \end{verbatim} % parser_e_absolute_only_to_var_or_const=03096_E_ABSOLUTE només es pot associar a una variable o constant % The address of a \var{absolute} directive can only point to a variable or % constant. Therefore, the following code will produce this error: % \begin{verbatim} % Procedure X; % % var p : longint absolute x; % \end{verbatim} % parser_e_initialized_only_one_var=03097_E_Només es pot inicialitzar una variable % You cannot specify more than one variable with a initial value % in Delphi mode. parser_e_abstract_no_definition=03098_E_Els mètodes abstractes no han de tenir cap definició (en el cos de la funció) % Abstract methods can only be declared, you cannot implement them. They % should be overridden by a descendant class. parser_e_overloaded_must_be_all_global=03099_E_Aquesta funció sobrecarregada no pot ser local (ha de ser EXPORTED) % You are defining a overloaded function in the implementation part of a unit, % but there is no corresponding declaration in the interface part of the unit. parser_w_virtual_without_constructor=03100_W_Els mètodes virtuals s'utilitzen sense un constructor a "$1" % If you declare objects or classes that contain virtual methods, you need % to have a constructor and destructor to initialize them. The compiler % encountered an object or class with virtual methods that doesn't have % a constructor/destructor pair. parser_c_macro_defined=03101_CL_S'ha definit la macro: $1 % When \var{-vc} is used, the compiler tells you when it defines macros. parser_c_macro_undefined=03102_CL_S'ha indefinit la macro: $1 % When \var{-vc} is used, the compiler tells you when it undefines macros. parser_c_macro_set_to=03103_CL_S'ha ficat la macro $1 a $2 % When \var{-vc} is used, the compiler tells you what values macros get. parser_i_compiling=03104_I_S'està compilant $1 % When you turn on information messages (\var{-vi}), the compiler tells you % what units it is recompiling. parser_u_parsing_interface=03105_UL_S'està analitzant l'interfície de l'unitat $1 % This tells you that the reading of the interface % of the current unit starts parser_u_parsing_implementation=03106_UL_S'està analitzant l'implementació de $1 % This tells you that the code reading of the implementation % of the current unit, library or program starts parser_d_compiling_second_time=03107_DL_S'està compilant $1 per segona vegada % When you request debug messages (\var{-vd}) the compiler tells you what % units it recompiles for the second time. parser_e_no_property_found_to_override=03109_E_No s'ha trobat la propietat a sobreescriure % You want to overrride a property of a parent class, when there is, in fact, % no such property in the parent class. parser_e_only_one_default_property=03110_E_Només es permet una propietat predeterminada. % You specified a property as \var{Default}, but the class already has a % default property, and a class can have only one default property. parser_e_property_need_paras=03111_E_La propietat predeterminada ha de ser un conjunt de propietat % Only array properties of classes can be made \var{default} properties. parser_e_constructor_cannot_be_not_virtual=03112_E_Els constructors virtuals només son compatibles en models class object % You cannot have virtual constructors in objects. You can only have them % in classes. parser_e_no_default_property_available=03113_E_No hi ha cap propietat predeterminada disponible % You are trying to access a default property of a class, but this class (or one of % its ancestors) does not have a default property. parser_e_cant_have_published=03114_E_La classe no pot tenir una secció PUBLISHED, utilitzeu el commutador {$M+} % If you want a \var{published} section in a class definition, you must % use the \var{\{\$M+\}} switch, whch turns on generation of type % information. parser_e_forward_declaration_must_be_resolved=03115_E_La declaració posterior de la classe "$1" s'ha de resoldre aquí per poder utilitzar la classe com anvantpassada % To be able to use an object as an ancestor object, it must be defined % first. This error occurs in the following situation: % \begin{verbatim} % Type ParentClas = Class; % ChildClass = Class(ParentClass) % ... % end; % \end{verbatim} % Where \var{ParentClass} is declared but not defined. parser_e_no_local_operator=03116_E_No es permeten els operadors locals % You cannot overload locally, i.e. inside procedures or function % definitions. parser_e_proc_dir_not_allowed_in_interface=03117_E_No es permet la directiva de procediment "$1" en la secció INTERFACE % This procedure directive is not allowed in the \var{interface} section of % a unit. You can only use it in the \var{implementation} section. parser_e_proc_dir_not_allowed_in_implementation=03118_E_No es permet la directiva del procediment "$1" en la secció IMPLEMENTATION % This procedure directive is not defined in the \var{implementation} section of % a unit. You can only use it in the \var{interface} section. parser_e_proc_dir_not_allowed_in_procvar=03119_E_No es permet la directiva del procediment "$1" en la declaració procvar % This procedure directive cannot be part of a procedural of function % type declaration. parser_e_function_already_declared_public_forward=03120_E_La funció "$1" ja està declarada com Public/Forward % You will get this error if a function is defined as \var{forward} twice. % Or it is once in the \var{interface} section, and once as a \var{forward} % declaration in the \var{implmentation} section. parser_e_not_external_and_export=03121_E_No es poden utilitzar EXPORT i EXTERNAL conjuntament % These two procedure directives are mutually exclusive parser_n_not_supported_for_inline=03123_N_Encara no es permet "$1" dins de procediment/funció inserits % Inline procedures don't support this declaration. parser_h_inlining_disabled=03124_H_S'ha deshabilitat l'inseriment % Inlining of procedures is disabled. parser_i_writing_browser_log=03125_I_S'està escrivint el registre del navegador $1 % When information messages are on, the compiler warns you when it % writes the browser log (generated with the \var{\{\$Y+ \}} switch). parser_h_maybe_deref_caret_missing=03126_H_Pot ser que falti la dereferència del punter % The compiler thinks that a pointer may need a dereference. parser_f_assembler_reader_not_supported=03127_F_El lector de l'assemblador seleccionat no és compatible % The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not % supported. The compiler can be compiled with or without support for a % particular assembler reader. earser_e_proc_dir_conflict=03128_E_La directiva del procediment "$1" té conflictes amb altres directives % You specified a procedure directive that conflicts with other directives. % for instance \var{cdecl} and \var{pascal} are mutually exclusive. parser_e_call_convention_dont_match_forward=03129_E_La convenció de la crida no concorda amb la posterior % This error happens when you declare a function or procedure with % e.g. \var{cdecl;} but omit this directive in the implementation, or vice % versa. The calling convention is part of the function declaration, and % must be repeated in the function definition. parser_e_property_cant_have_a_default_value=03131_E_La propietat no pot tenir un valor predeterminat % Set properties or indexed properties cannot have a default value. parser_e_property_default_value_must_const=03132_E_El valor predeterminat d'una propietat ha de ser constant % The value of a \var{default} declared property must be knwon at compile % time. The value you specified is only known at run time. This happens % .e.g. if you specify a variable name as a default value. parser_e_cant_publish_that=03133_E_No es pot publicar el símbol, només pot ser una classe % Only class type variables can be in a \var{published} section of a class % if they are not declared as a property. parser_e_cant_publish_that_property=03134_E_No es pot publicar aquest tipus de propietat % Properties in a \var{published} section cannot be array properties. % they must be moved to public sections. Properties in a \var{published} % section must be an ordinal type, a real type, strings or sets. parser_e_empty_import_name=03136_E_Es requereix nom d'importació % Some targets need a name for the imported procedure or a \var{cdecl} specifier parser_e_division_by_zero=03138_E_S'ha efectuat una divisió per zero % There is a divsion by zero encounted parser_e_invalid_float_operation=03139_E_L'operació de punt flotant no és vàlida % An operation on two real type values produced an overflow or a division % by zero. parser_e_array_lower_less_than_upper_bound=03140_E_El límit superior de l'abast és menor que el límit inferior % The upper bound of a an array declaration is less than the lower bound and this % is not possible parser_w_string_too_long=03141_W_La cadena "$1" és més llarga que "$2" % The size of the constant string is larger than the size you specified in % string type definition parser_e_string_larger_array=03142_E_La longitud de la cadena és major que el conjunt de caràcters % The size of the constant string is larger than the size you specified in % the array[x..y] of char definition parser_e_ill_msg_expr=03143_E_Hi ha una expressió il·legal després d'una directiva del missatge % \fpc supports only integer or string values as message constants parser_e_ill_msg_param=03144_E_Els manipuladors de missatges només accepten una crida per paràmetre de referència % A method declared with the \var{message}-directive as message handler % can take only one parameter which must be declared as call by reference % Parameters are declared as call by reference using the \var{var}-directive parser_e_duplicate_message_label=03145_E_L'etiqueta del missatge està duplicada: "$1" % A label for a message is used twice in one object/class parser_e_self_in_non_message_handler=03146_E_SELF només pot ser un paràmetre explícit en mètodes que son manipuladors dels missatges % The self parameter can be passed only explicit if it is a method which % is declared as message handler parser_e_threadvars_only_sg=03147_E_Les variables del fil només poden ser estàtiques o globals % Threadvars must be static or global, you can't declare a thread % local to a procedure. Local variables are always local to a thread, % because every thread has its own stack and local variables % are stored on the stack parser_f_direct_assembler_not_allowed=03148_F_L'assemblador directe no és compatible amb el format binari de la sortida % You can't use direct assembler when using a binary writer, choose an % other outputformat or use another assembler reader % \end{description} parser_w_no_objpas_use_mode=03149_W_No carregueu manualment l'unitat OBJPAS, utilitzeu {\$mode objfpc\} o {\$mode delphi\} % You are trying to load the ObjPas unit manual from a uses clause. This is % not a good idea. Use the \var{\{\$mode objfpc\}} or % \var{\{\$mode delphi\}} % directives which load the unit automatically parser_e_no_object_override=03150_E_No es pot utilitzar OVERRIDE en objectes % Override is not supported for objects, use \var{virtual} instead to override % a method of a parent object parser_e_cant_use_inittable_here=03151_E_No es poden utilitzar els tipus de dades que requereixen inicialització/finalització en registres variables % Some data type (e.g. \var{ansistring}) needs initialization/finalization % code which is implicitly generated by the compiler. Such data types % can't be used in the variant part of a record. parser_e_resourcestring_only_sg=03152_E_Les cadenes del recurs només poden ser estàtiques o globals % Resourcestring can not be declared local, only global or using the static % directive. parser_e_exit_with_argument_not__possible=03153_E_Aquí no es pot utilitzar Exit amb arguments % an exit statement with an argument for the return value can't be used here, this % can happen e.g. in \var{try..except} or \var{try..finally} blocks parser_e_stored_property_must_be_boolean=03154_E_El tipus del símbol ha de ser booleà % If you specify a storage symbol in a property declaration, it must be of % the type boolean parser_e_ill_property_storage_sym=03155_E_No es permet aquest símbol com a símbol per emmagatzemar % You can't use this type of symbol as storage specifier in property % declaration. You can use only methods with the result type boolean, % boolean class fields or boolean constants parser_e_only_publishable_classes_can__be_published=03156_E_Només les classes compilades amb el mode $M+ poden ser publicades % In the published section of a class can be only class as fields used which % are compiled in $M+ or which are derived from such a class. Normally % such a class should be derived from TPersitent parser_e_proc_directive_expected=03157_E_S'esperava la directiva del procediment % When declaring a procedure in a const block you used a ; after the % procedure declaration after which a procedure directive must follow. % Correct declarations are: % \begin{verbatim} % const % p : procedure;stdcall=nil; % p : procedure stdcall=nil; % \end{verbatim} parser_e_invalid_property_index_value=03158_E_El valor per un índex de la propietat ha de ser d'un tipus ordinal % The value you use to index a property must be of an ordinal type, for % example an integer or enumerated type. parser_e_procname_to_short_for_export=03159_E_El nom del procediment és massa curt per ser exportat % The length of the procedure/function name must be at least 2 characters % long. This is because of a bug in dlltool which doesn't parse the .def % file correct with a name of length 1. parser_e_dlltool_unit_var_problem=03160_E_No es pot generar una entrada DEFFILE per les variables globals d'una unitat parser_e_dlltool_unit_var_problem2=03161_E_Compileu sense l'opció -WD % You need to compile this file without the -WD switch on the % commandline parser_f_need_objfpc_or_delphi_mode=03162_F_Necessiteu el mode ObjFpc (-S2) o Delphi (-Sd) per compilar aquest mòdul % You need to use {\$MODE OBJFPC\} or {\$MODE DELPHI\} to compile this file % Or use the equivalent commandline switches -S2 or -Sd parser_e_no_export_with_index_for_target=03163_E_No es pot exportar amb índex sota $1 % Exporting of functions or procedures with a specific index is not % supported on this target. parser_e_no_export_of_variables_for_target=03164_E_No es poden exportar variables sota $1 % Exporting of variables is not supported on this target. parser_e_improper_guid_syntax=03165_E_La sintaxi de GUID no és apropiada parser_w_interface_mapping_notfound=03168_W_El procediment anomenat "$1" no sembla apropiat per implementar $2.$3 parser_e_interface_id_expected=03169_E_S'esperava identificador d'interfície % This happens when the compiler scans a \var{class} declaration that contains % \var{interface} function name mapping code like this: % \begin{verbatim} % type % TMyObject = class (TObject, IDispach) % function IUnknown.QueryInterface=MyQueryInterface; % .... % \end{verbatim} % and the \var{interface} before the dot not listed in the inheritance list. parser_e_type_cant_be_used_in_array_index=03170_E_No es pot utilitzar el tipus "$1" com a índex de conjunt % Types like \var{qword} or \var{int64} aren't allowed as array index type parser_e_no_con_des_in_interfaces=03171_E_No es permeten els constructors i destructors a l'interfície % Constructor and destructor declarations aren't allowed in interface % In the most cases the method \var{QueryInterface} of \var{IUnknown} can % be used to create a new interface parser_e_no_access_specifier_in_interfaces=03172_E_No es poden utilitzar els especificadors d'accés en l'interfície % The access specifiers \var{public}, \var{private}, \var{protected} and % \var{published} can't be used in interfaces because all methods % of an interfaces must be public. parser_e_no_vars_in_interfaces=03173_E_Una interfície no pot contenir camps % Declarations of fields aren't allowed in interfaces. An interface % can contain only methods parser_e_no_local_proc_external=03174_E_No es poden declarar procediments locals com EXTERNAL % Declaring local procedures as external is not possible. Local procedures % get hidden parameters that will make the chance of errors very high parser_w_skipped_fields_before=03175_W_Alguns camps d'abans de "$1" no s'han inicialitzat % In Delphi mode, not all fields of a typed constant record have to be % initialized, but the compiler warms you when it detects such situations parser_e_skipped_fields_before=03176_E_Alguns camps d'abans de "$1" no s'han inicialitzat % In all syntax modes but Delphi mode, you can't leave some fields unitialized % in the middle of a typed constant record parser_w_skipped_fields_after=03177_W_Alguns camps de després de "$1" no s'han inicialitzat % You can leave some fields at the end of a type constant record unitialized % (the compiler will initialize them to zero automatically), this may be the cause % of subtle problems. parser_e_varargs_need_cdecl_and_external=03178_E_Directiva VarArgs sense CDecl i External % The varargs directive can only be used with procedures or functions % that are declared with \var{cdecl} and \var{external} directives. The varargs directive % is only meant to provide a compatible interface to C functions like printf. parser_e_self_call_by_value=03179_E_SELF ha de ser un paràmetre normal % You can't declare self as a const or var parameter, it must always be % a call-by-value parameter parser_e_interface_has_no_guid=03180_E_L'interfície "$1" no té identificació d'interfície % When you want to assign an interface to a constant, then the interface % must have a GUID value set. parser_e_illegal_field_or_method=03181_E_Es desconeix el camp de la classe o l'identificador del mètode "$1" % Properties must refer to a field or method in the same class parser_w_proc_overriding_calling=03182_W_S'està sobreescrivint la convenció de la crida "$1" amb "$2" % There are two directives in the procedure declaration that specify a calling % convention. Only the last directive will be used parser_e_noprocvarobj_const=03183_E_Les constants del tipus "procediment de l'objecte" només es poden inicialitzar amb NIL % You can't assign the address of a method to a typed constant which has a % "procedure of object" type, because such a constant requires two addresses: % that of the method (which is known at compile time) and that of the object or % class instance it operates an (which can't be known at compile time). parser_e_default_value_only_one_para=03184_E_El valor predeterminat només es pot assignar a un paràmetre parser_e_default_value_expected_for_para=03185_E_Es requereix el paràmetre predeterminat per "$1" parser_w_unsupported_feature=03186_W_No es permet l'ús d'aquesta característica! % You're trying to force the compiler into doing something it cannot do yet. parser_h_c_arrays_are_references=03187_H_Els conjunts del C es passen per referència % Any array passed to a C functions is passed % by a pointer (i.e. by reference). parser_e_C_array_of_const_must_be_last=03188_E_El conjunt de constants de C, han de ser l'últim argument % You can not add any other argument after an \var{array of const} for % \var{cdecl} functions, as the size pushed on stack for this argument is % not known. parser_h_type_redef=03189_H_S'ha tornat a definir el tipus "$1" % This is an indicator that a previously declared type is % being redefined as something else. This may, or may not % be, a cause for errors. parser_w_cdecl_has_no_high=03190_W_Les funcions declarades amb CDECL no tenen paràmetres alts % Functions declared with cdecl modifier do not pass an extra implicit parameter parser_w_cdecl_no_openstring=03191_W_Les funcions declarades amb CDECL no son compatibles amb les cadenes obertes % Openstring is not supported for cdecl'ared functions parser_e_initialized_not_for_threadvar=03192_E_No es poden inicialitzar variables definides com a variables del fil % Variables declared as threadvar can not be initialized with a default value % The variables will always be filled with zero at the start of a new thread parser_e_msg_only_for_classes=03193_E_Només es permet la directiva del missatge en classes % The message directive is only supported for Class types. parser_e_procedure_or_function_expected=03194_E_S'esperava procediment o funció % A class method can only be specified for procedures and functions parser_e_illegal_calling_convention=03195_E_S'ignora la directiva de la convenció de la crida: "$1" % Some calling conventions are supported only by certain CPUs. I.e. most % non-i386 ports support only the standard ABI calling convention of the CPU. parser_e_no_object_reintroduce=03196_E_No es pot utilitzar REINTRODUCE en els objectes % \var{REINTRODUCE} is not supported for objects parser_e_paraloc_only_one_para=03197_E_Cada argument ha de tenir la seva pròpia localització % if locations for arguments are specified explicity as it is required by % some syscalls conventions, each argument must have its only location, % things like \var{procedure p (i,j:longint 'r');} aren't allowed parser_e_paraloc_all_paras=03198_E_Cada argument ha de tenir una localització explicita % if one argument has an explicit argument location, all arguments of a procedure % must have one parser_e_illegal_explicit_paraloc=03199_E_No es coneix la localització de l'argument % The location specified for an argument isn't recognized by the compiler parser_e_32bitint_or_pointer_variable_expected=03200_E_S'esperava variable tipus Integer de 32 Bits o Pointer % The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable. parser_e_goto_outside_proc=03201_E_No es permeten les declaracions GOTO entre diferents procediments % It is not allowed to use the \var{goto} statements referencing labels outside the % current procedure. The following example shows the problem: % \begin{verbatim} % ... % procedure p1; % label % l1: % % procedure p2; % begin % goto l1; // This goto ISN'T allowed % end; % % begin % p2 % l1; % end; % ... % % \end{verbatim} parser_f_too_complex_proc=03202_F_El procediment és massa complex, requereix massa registres % Your procedure body is too long for the compiler. You should split the % procedure into multiple smaller procedures. parser_e_illegal_expression=03203_E_L'expressió és il·legal % This can occur under many circumstancies. Mostly when trying to evaluate % constant expressions parser_e_invalid_integer=03204_E_L'expressió amb INTEGER no és vàlida, el resultat ha de ser INTEGER % You made an expression which isn't an integer, and the compiler expects the % result to be an integer. parser_e_invalid_qualifier=03205_E_El qualificador és il·legal % One of the following is happening: % \begin{itemize} % \item You're trying to access a field of a variable that is not a record. % \item You're indexing a variable that is not an array. % \item You're dereferencing a variable that is not a pointer. % \end{itemize} parser_e_upper_lower_than_lower=03206_E_El límit més alt és inferior al límit més baix de l'abast % You are declaring a subrange, and the lower limit is higher than the high % limit of the range parser_e_macpas_exit_wrong_param=03207_E_La sortida del paràmetre ha de ser el nom del procediment on s'utilitza % Non local exit is not allowed. This error occurs only in mode MacPas. parser_e_illegal_assignment_to_count_var=03208_E_L'assignació de la variable "$1" del bucle FOR no és vàlida % The type of a \var{for} loop variable must be an ordinal type. % Loop variables cannot be reals or strings. parser_e_no_local_var_external=03209_E_No es pot declarar una variable local com EXTERNAL % Declaring local variables as external is not allowed. Only global variables can reference % to external variables. parser_e_proc_already_external=03210_E_El procediment ja està declarat com EXTERNAL % The procedure is already declared with the EXTERNAL directive in an interface of % forward declaration. parser_w_implicit_uses_of_variants_unit=03211_W_S'està utilitzant implícitament l'unitat Variants % The Variant type is used in the unit without any used unit using the variants unit. % The compiler has implicity added the Variants unit to the uses list. % To remove this warning, the Variants unit needs to be added to the USES statement. parser_e_no_static_method_in_interfaces=03212_E_No es poden utilitzar els mètodes de la classe i estàtics dins d'INTERFACES % The specifier \var{class} and directive \var{static} can be used in interfaces % because all methods of an interface must be public. parser_e_arithmetic_operation_overflow=03213_E_S'ha produït una sobrecàrrega en l'operació aritmètica % An operation on two integers values produced an overflow % \end{description} # # Type Checking # # # 04058 is the last used one # % \section{Type checking errors} % This section lists all errors that can occur when type checking is % performed. % \begin{description} type_e_mismatch=04000_E_Els tipus no concorden % This can happen in many cases: % \begin{itemize} % \item The variable you're assigning to is of a different type than the % expression in the assignment. % \item You are calling a function or procedure with parameters that are % incompatible with the parameters in the function or procedure definition. % \end{itemize} type_e_incompatible_types=04001_E_Els tipus son incompatibles: s'ha obtingut "$1", s'esperava "$2" % There is no conversion possible between the two types % Another possiblity is that they are declared in different % declarations: % \begin{verbatim} % Var % A1 : Array[1..10] Of Integer; % A2 : Array[1..10] Of Integer; % % Begin % A1:=A2; { This statement gives also this error, it % is due the strict type checking of pascal } % End. % \end{verbatim} type_e_not_equal_types=04002_E_Els tipus "$1" i "$2" no concorden % The types are not equal type_e_type_id_expected=04003_E_S'esperava un identificador de tipus % The identifier is not a type, or you forgot to supply a type identifier. type_e_variable_id_expected=04004_E_S'esperava un identificador de variable % This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec}) % when it expects a variable. You can only pass variables as arguments to these functions. type_e_integer_expr_expected=04005_E_S'esperava una expressió entera, però s'ha obtingut "$1" % The compiler expects an expression of type integer, but gets a different % type. type_e_boolean_expr_expected=04006_E_S'esperava una expressió booleana, però s'ha obtingut "$1" % The expression must be a boolean type, it should be return true or % false. type_e_ordinal_expr_expected=04007_E_S'esperava una expressió ordinal % The expression must be of ordinal type, i.e., maximum a \var{Longint}. % This happens, for instance, when you specify a second argument % to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value. type_e_pointer_type_expected=04008_E_S'esperava un tipus punter, però s'ha obtingut "$1" % The variable or expression isn't of the type \var{pointer}. This % happens when you pass a variable that isn't a pointer to \var{New} % or \var{Dispose}. type_e_class_type_expected=04009_E_S'esperava un tipus de classe, però s'ha obtingut "$1" % The variable of expression isn't of the type \var{class}. This happens % typically when % \begin{enumerate} % \item The parent class in a class declaration isn't a class. % \item An exception handler (\var{On}) contains a type identifier that % isn't a class. % \end{enumerate} type_e_cant_eval_constant_expr=04011_E_No es pot avaluar l'expressió constant % This error can ocurr when the bounds of an array you declared does % not evaluate to ordinal constants type_e_set_element_are_not_comp=04012_E_Els elements del conjunt no son compatibles % You are trying to make an operation on two sets, when the set element types % are not the same. The base type of a set must be the same when taking the % union type_e_set_operation_unknown=04013_E_L'operació no està implementada pels conjunts % several binary operations are not defined for sets % like div mod ** (also >= <= for now) type_w_convert_real_2_comp=04014_W_S'està convertint automàticament el tipus de punt flotant a COMP, el qual és un tipus enter % An implicit type conversion from a real type to a \var{comp} is % encountered. Since \var{comp} is a 64 bit integer type, this may indicate % an error. type_h_use_div_for_int=04015_H_Utilitzeu DIV per obtenir un resultat enter % When hints are on, then an integer division with the '/' operator will % procuce this message, because the result will then be of type real type_e_strict_var_string_violation=04016_E_Els tipus de la cadena no concorden a causa del mode $V+ % When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter % should be of the exact same type as the declared parameter of the procedure. type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_No es pot utilitzar SUCC o PRED en enumeracions amb assignació % When you declared an enumeration type which has assignments in it, as in C, % like in the following: % \begin{verbatim} % Tenum = (a,b,e:=5); % \end{verbatim} % you cannot use the \var{Succ} or \var{Pred} functions on them. type_e_cant_read_write_type=04018_E_No es poden llegir o escriure variables d'aquest tipus % You are trying to \var{read} or \var{write} a variable from or to a % file of type text, which doesn't support that. Only integer types, % reals, pchars and strings can be read from/written to a text file. % Booleans can only be written to text files. type_e_no_readln_writeln_for_typed_file=04019_E_No és pot utilitzar READLN o WRITELN en fitxers de tipus % \var{readln} and \var{writeln} are only allowed for text files. type_e_no_read_write_for_untyped_file=04020_E_No és pot utilitzar READ o WRITE en fitxers sense tipus % \var{read} and \var{write} are only allowed for text or typed files. type_e_typeconflict_in_set=04021_E_S'ha produït un conflicte de tipus entre els elements del conjunt % There is at least one set element which is of the wrong type, i.e. not of % the set type. type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) retorna el word/dword més alt/més baix % \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword} % which returns the lower/upper word of the argument. TP always uses % a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the % bits 8..15 for \var{hi}. If you want the TP behavior you have % to type case the argument to \var{word/integer} type_e_integer_or_real_expr_expected=04023_E_S'esperava una expressió tipus INTEGER o REAL % The first argument to \var{str} must a real or integer type. type_e_wrong_type_in_array_constructor=04024_E_El tipus "$1" no és correcte en el constructor del conjunt % You are trying to use a type in an array constructor which is not % allowed. type_e_wrong_parameter_type=04025_E_El tipus de l'argument num.$1 és incompatible: s'ha obtingut "$2", s'esperava "$3" % You are trying to pass an invalid type for the specified parameter. % \end{description} type_e_no_method_and_procedure_not_compatible=04026_E_El mètode (variable) i el procediment (variable) no son compatibles % You can't assign a method to a procedure variable or a procedure to a % method pointer. type_e_wrong_math_argument=04027_E_S'ha passat una constant il·legal a una funció matemàtica interna % The constant argument passed to a ln or sqrt function is out of % the definition range of these functions. type_e_no_addr_of_constant=04028_E_No es pot trobar l'adreça de les constants % It is not possible to get the address of a constant, because they % aren't stored in memory, you can try making it a typed constant. type_e_argument_cant_be_assigned=04029_E_No es pot assignar l'argument % Only expressions which can be on the left side of an % assignment can be passed as call by reference argument % Remark: Properties can be only % used on the left side of an assignment, but they cannot be used as arguments type_e_cannot_local_proc_to_procvar=04030_E_No es pot assignar el procediment/funció local a la variable del procediment % It's not allowed to assign a local procedure/function to a % procedure variable, because the calling of local procedure/function is % different. You can only assign local procedure/function to a void pointer. type_e_no_assign_to_addr=04031_E_No es poden assignar els valors a una adreça % It is not allowed to assign a value to an address of a variable, constant, % procedure or function. You can try compiling with -So if the identifier % is a procedure variable. type_e_no_assign_to_const=04032_E_No es poden assignar valors a una variable declarada com a constant % It's not allowed to assign a value to a variable which is declared % as a const. This is normally a parameter declared as const, to allow % changing the value make the parameter as a value parameter or a var. type_e_array_required=04033_E_Es requereix tipus de conjunt % If you are accessing a variable using an index '[]' then % the type must be an array. In FPC mode also a pointer is allowed. type_e_interface_type_expected=04034_E_S'esperava tipus d'interfície, però s'ha obtingut "$1" type_w_mixed_signed_unsigned=04035_W_El resultat de la barreja d'expressions amb signe i paraules llargues és de 64 octets % If yoy divide (or calculate the modulus of) a signed expression by a longword (or vice versa), % or if you have overflow and/or range checking turned on and use an arithmetic % expression (+, -, *, div, mod) in which both signed numbers and longwords appear, % then everything has to be evaluated in 64bit which is slower than normal % 32bit arithmetic. You can avoid this by typecasting one operand so it % matches the result type of the other one. type_w_mixed_signed_unsigned2=04036_W_Barrejar expressions amb signe i cardinals aquí, pot causar errors de l'abast % If you use a binari operator (and, or, xor) and one of % the operands is a longword while the other one is a signed expression, then, % if range checking is turned on, you may get a range check error because in % such a case both operands are converted to longword before the operation is % matches the result type of the other one. type_e_typecast_wrong_size_for_assignment=04037_E_La conversió de tipus té diferents tamanys ($1 -> $2) en les assignacions % Type casting to a type with a different size is not allowed when the variable is % used for assigning. type_e_array_index_enums_with_assign_not_possible=04038_E_Els enumerats amb assignacions no es poden utilitzar com a índex de conjunts % When yoy declare an enumeration type which has assignments in it, as in C, % like the foloowing: % \begin{verbatim} % Tenum = (a,b,e:=5); % \end{verbatim} % yoy cannot use it as index of an array. type_e_classes_not_related=04039_E_Els tipus Class o Object "$1" i "$2" no estan relacionats % There is a typecast from one class or object to another while the class/object % are not related. This will probably lead to errors type_w_classes_not_related=04040_W_Els tipus de la classe "$1" i "$2" no estan relacionats % There is a typecast from one class or object to another while the class/object % are not related. This will probably lead to errors type_e_class_or_interface_type_expected=04041_E_S'esperava tipus de classe o interfície, però s'ha obtingut "$1" type_e_type_is_not_completly_defined=04042_E_No s'ha definit completament el tipus "$1" % The size of the constant string, which is assigned to a shortstring, % is longer than the maximum size of the shortstring type_w_signed_unsigned_always_false=04044_W_La comparació és sempre falsa a causa de l'abast dels valors % There is a comparison between an unsigned value and a signed constant which is % less than zero. Because of type promotion, the statement will always evaluate to % false. Explicitly typecast the constant to the correct range to avoid this problem. type_w_signed_unsigned_always_true=04045_W_La comparació és sempre vertadera a causa de l'abast dels valors % There is a comparison between an unsigned value and a signed constant which is % less than zero. Because of type promotion, the statement will always evaluate to % true. Explicitly typecast the constant to the correct range to avoid this problem. type_w_instance_with_abstract=04046_W_S'està construint una classe "$1" amb mètodes abstractes % An instance of a class is created which contains non_implemented abstract % methods. This will probably lead to a runtime error 211 in the code if that % routine is ever called. All abstract methods should be overridden. type_h_in_range_check=04047_H_L'operand esquerra per a l'operador d'IN ha de tenir el tamany d'un octet % The left operand of the \var{in} operator is not an ordinal or enumeration which fits % within 8-bits, this may lead to range check errors. The \var{in} operator % currently only supports a left operand which fits within a byte. In the case of % enumerations, the size of an element of an enumeration can be controlled with % the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches. type_w_smaller_possible_range_check=04048_W_El tamany dels tipus no concorden, possible pèrdua de dades / errors de l'abast type_h_smaller_possible_range_check=04049_H_El tamany dels tipus no concorden, possible pèrdua de dades / errors de l'abast % There is an assignement to a smaller type than the source type. This means that % this may cause a range-check error, or may lead to possible loss of data type_e_cant_take_address_of_abtract_method=04050_E_No es pot obtenir l'adreça d'un mètode abstracte % An abstract method has no body, so the address of an abstract method can not % be taken type_e_operator_not_allowed=04051_E_No es pot aplicar l'operador pel tipus d'operand % You are trying an operator that is not available for the type of the % operands type_e_constant_expr_expected=04052_E_S'esperava una expressió constant % The compiler expects an constant expression, but gets a variable expression. type_e_operator_not_supported_for_types=04053_E_L'operació "$1" no és compatible pels tipus "$2" i "$3" % The operation is not allowed for the supplied types type_e_illegal_type_conversion=04054_E_S'ha produït una conversió il·legal dels tipus: "$1" a "$2" % When doing a type-cast, you must take care that the sizes of the variable % and the destination type are the same type_h_pointer_to_longint_conv_not_portable=04055_H_La conversió entre ordinals i punters no és portable % If you typecast a pointer to a longint (or vice-versa), this code will not % compile on a machineusing 64-bit for pointer storage. type_w_pointer_to_longint_conv_not_portable=04056_W_La conversió entre ordinals i punters no és portable % If you typecast a pointer to a ordinal type of different size (or vice-versa) % this can cause problems. This is a warning to help finding the 32bit specific % code where cardinal/longint is used to typecast pointers to ordinals % A solution is to use the ptrint/ptruint types instead. type_e_cant_choose_overload_function=04057_E_No es pot determinar a quina funció sobrecarregada cridar. % You are calling overloaded functions with a parameter that does not correspond % to any of the declared function parameter lists. e.g. when you have declared % a function with parameters \var{word} and \var{longint}, and then you call % it with a parameter which is of type \var{integer}. type_e_illegal_count_var=04058_E_La variable del comptador no és vàlida % The type of a \var{for} loop variable must be an ordinal type. % Loop variables cannot be reals or strings. % \end{description} # # Symtable # # 05056 is the last used one # % \section{Symbol handling} % This section lists all the messages that concern the handling of symbols. % This means all things that have to do with procedure and variable names. % \begin{description} sym_e_id_not_found=05000_E_No s'ha trobat l'dentificador "$1" % The compiler doesn't know this symbol. Usually happens when you misspel % the name of a variable or procedure, or when you forgot to declare a % variable. sym_f_internal_error_in_symtablestack=05001_F_S'ha produït un error intern en SymTableStack() % An internal error occurred in the compiler; If you encounter such an error, % please contact the developers and try to provide an exact description of % the circumstances in which the error occurs. sym_e_duplicate_id=05002_E_L'identificador "$1" està duplicat % The identifier was already declared in the current scope. sym_h_duplicate_id_where=05003_H_L'identificador ja està definit en $1 en la línia $2 % The identifier was already declared in a previous scope. sym_e_unknown_id=05004_E_Es desconeix l'identificador "$1" % The identifier encountered has not been declared, or is used outside the % scope where it is defined. sym_e_forward_not_resolved=05005_E_No s'ha resolt la declaració posterior "$1" % This can happen in two cases: % \begin{itemize} % \item This happens when you declare a function (in the \var{interface} part, or % with a \var{forward} directive, but do not implement it. % \item You reference a type which isn't declared in the current \var{type} % block. % \end{itemize} sym_e_error_in_type_def=05007_E_S'ha produït un error en la definició del tipus % There is an error in your definition of a new array type: % \item One of the range delimiters in an array declaration is err¢neous. % For example, \var{Array [1..1.25]} will trigger this error. sym_e_forward_type_not_resolved=05009_E_No s'ha resolt el tipus posterior "$1" % A symbolwas forward defined, but no declaration was encountered. sym_e_only_static_in_static=05010_E_Només les variables estàtiques poden ser utilitzades en mètodes estàtics o fora dels mètodes % A static method of an object can only access static variables. sym_e_type_must_be_rec_or_object_or_class=05012_E_Record or object or class type expected % The variable or expression isn't of the type \var{record} or \var{object} or \var{class}. sym_e_no_instance_of_abstract_object=05013_E_No es permeten les instàncies de les classes o els objectes amb un mètode abstracte % You are trying to generate an instance of a class which has an abstract % method that wasn't overridden. sym_w_label_not_defined=05014_W_No s'ha definit l'etiqueta "$1" % A label was declared, but not defined. sym_e_label_used_and_not_defined=05015_E_S'està utilitzant l'etiqueta "$1" però no està definida % A label was declared and used, but not defined. sym_e_ill_label_decl=05016_E_La declaració de l'etiqueta no és vàlida % This error should never happen; it occurs if a label is defined outside a % procedure or function. sym_e_goto_and_label_not_supported=05017_E_No es permeten GOTO i LABEL (utilitzeu el commutador -Sg) % You must compile a program which has \var{label}s and \var{goto} statements % with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't % supported. sym_e_label_not_found=05018_E_No s'ha trobat l'etiqueta % A \var{goto label} was encountered, but the label isn't declared. sym_e_id_is_no_label_id=05019_E_L'identificador no és una etiqueta % The identifier specified after the \var{goto} isn't of type label. sym_e_label_already_defined=05020_E_L'etiqueta ja està definida % You are defining a label twice. You can define a label only once. sym_e_ill_type_decl_set=05021_E_Declaració de tipus il·legal dels elements del conjunt % The declaration of a set contains an invalid type definition. sym_e_class_forward_not_resolved=05022_E_No s'ha resolt la definició de la classe posterior "$1" % You declared a class, but you did not implement it. sym_n_unit_not_used=05023_H_No s'utilitza l'unitat "$1" en $2 % The unit referenced in the \var{uses} clause is not used. sym_h_para_identifier_not_used=05024_H_No s'utilitza el paràmetre "$1" % The identifier was declared (locally or globally) but % was not used (locally or globally). sym_n_local_identifier_not_used=05025_N_No s'utilitza la variable local "$1" % You have declared, but not used a variable in a procedure or function % implementation. sym_h_para_identifier_only_set=05026_H_S'ha assignat el paràmetre del valor "$1" però no s'utilitza % The identifier was declared (locally or globally) % set but not used (locally or globally). sym_n_local_identifier_only_set=05027_N_S'ha assignat la variable local "$1" però no s'utilitza % The variable in a procedure or function % implementation is declared, set but never used. sym_h_local_symbol_not_used=05028_H_No s'utilitza $1 local "$2" % A local symbol is never used. sym_n_private_identifier_not_used=05029_N_No s'utilitza el camp privat "$1.$2" sym_n_private_identifier_only_set=05030_N_S'ha assignat el camp privat "$1.$2" però no s'utilitza sym_n_private_method_not_used=05031_N_No s'utilitza el mètode privat "$1.$2" sym_e_set_expected=05032_E_S'esperava un tipus de conjunt % The variable or expression is not of type \var{set}. This happens in an % \var{in} statement. sym_w_function_result_not_set=05033_W_No s'ha definit el resultat de la funció % You can get this warning if the compiler thinks that a function return % value is not set. This will not be displayed for assembler procedures, % or procedures that contain assembler blocks. sym_w_wrong_C_pack=05034_W_El tipus "$1" no està alineat correctament en el registre actual pel C % Arrays with sizes not multiples of 4 will be wrongly aligned % for C structures. sym_e_illegal_field=05035_E_No es coneix l'identificador del camp del registre "$1" % The field doesn't exist in the record/object definition. sym_w_uninitialized_local_variable=05036_W_No s'ha inicialitzat la variable local "$1" % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_w_uninitialized_variable=05037_W_No s'ha inicialitzat la variable "$1" % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_e_id_no_member=05038_E_L'identificador "$1" no identifica cap membre % This error is generated when an identifier of a record, % field, or method is accessed while it is not defined. sym_h_param_list=05039_H_S'ha trobat la declaració: $1 % You get this when you use the \var{-vh} switch. In case an overloaded % procedure is not found, then all candidate overloaded procedures are % listed, with their parameter lists. sym_e_segment_too_large=05040_E_L'element de dades és massa llarg % You get this when you declare an array whose size exceeds the % prescribed limit (2 Gb on 80368+/68020+ processors) sym_e_no_matching_implementation_found=05042_E_S'ha trobat una implementació pel mètode d'interfície "$1" que no concorda % There was no matching method found which could implement the interface % method. Check argument types and result type of the methods. sym_w_deprecated_symbol=05043_W_Es desaconsella el símbol "$1" % This means that a symbol (a variable, routine, etc...) which is % declared as \var{deprecated} is used. Deprecated symbols may no longer % be available in newer versions of the unit/library. Usage of this symbol % should be avoied as much as possible. sym_w_non_portable_symbol=05044_W_El símbol "$1" no és portable % This means that a symbol (a variable, routine, etc...) which is % declared as \var{platform} is used. This symbol's value, usage % and availability is platform specific and should not be used % if the source code must be portable. sym_w_non_implemented_symbol=05055_W_El símbol "$1" no està implementat % This means that a symbol (a variable, routine, etc...) which is % declared as \var{unimplemented} is used. This symbol is defined, % but is not yet implemented on this specific platform. sym_e_cant_create_unique_type=05056_E_No es pot crear un tipus únic a partir d'aquest tipus % Only simple types like ordinal, float and string types are supported when % redefining a type with \var{type newtype = type oldtype;} % \end{description} sym_h_uninitialized_local_variable=05057_H_La variable local "$1" no està inicialitzada % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) sym_h_uninitialized_variable=05058_H_La variable "$1" no està inicialitzada % This message is displayed if the compiler thinks that a variable will % be used (i.e. appears in the right-hand-side of an expression) when it % was not initialized first (i.e. appeared in the left-hand side of an % assigment) # # Codegenerator # # 06045 is the last used one # % \section{Code generator messages} % This section lists all messages that can be displayed if the code % generator encounters an error condition. % \begin{description} cg_e_parasize_too_big=06009_E_El tamany de la llista de paràmetres excedeix els 65535 octets % The I386 processor limits the parameter list to 65535 bytes (the \var{RET} % instruction causes this) cg_e_file_must_call_by_reference=06012_E_Els tipus del fitxer han de ser paràmetres variables % You cannot specify files as value parameters, i.e. they must always be % declared \var{var} parameters. cg_e_cant_use_far_pointer_there=06013_E_Aquí no es permet l'ús de punters de tipus FAR % Free Pascal doesn't support far pointers, so you cannot take the address of % an expression which has a far reference as a result. The \var{mem} construct % has a far reference as a result, so the following code will produce this % error: % \begin{verbatim} % var p : pointer; % ... % p:=@mem[a000:000]; % \end{verbatim} cg_e_dont_call_exported_direct=06015_E_No es poden cridar les funcions declarades amb EXPORT % No longer in use. cg_w_member_cd_call_from_method=06016_W_Possiblement s'ha produït una crida il·legal d'un constructor o destructor % The compiler detected that a constructor or destructor is called within a % method. This will probably lead to problems, since contructors/destructors % require parameters on entry cg_n_inefficient_code=06017_N_El codi és ineficient % You statement seems dubious to the compiler. cg_w_unreachable_code=06018_W_Aquest codi no s'executa mai % You specified a construct which will never be executed. Example: % \begin{verbatim} % while false do % begin % {.. code ...} % end; % \end{verbatim} cg_e_cant_call_abstract_method=06020_E_Els mètodes abstractes no es poden cridar directament % You cannot call an abstract method directy, instead you must call a % overriding child method, because an abstract method isn't implemented. cg_d_register_weight=06027_DL_Registre $1 pes $2 $3 % Debugging message. Shown when the compiler considers a variable for % keeping in the registers. cg_d_stackframe_omited=06029_DL_S'omet l'estructura de la pila % Some procedure/functions do not need a complete stack-frame, so it is omitted. % This message will be displayed when the {-vd} switch is used. cg_e_unable_inline_object_methods=06031_E_No es poden inserir mètodes d'objectes o classes % You cannot have inlined object methods. cg_e_unable_inline_procvar=06032_E_No es poden inserir crides a procvar % A procedure with a procedural variable call cannot be inlined. cg_e_no_code_for_inline_stored=06033_E_No hi ha codi enmagetzemat pel procediment inserit % The compiler couldn't store code for the inline procedure. cg_e_can_access_element_zero=06035_E_No es pot accedir a l'element zero d'un ansi/wide- o longstring, utilitzeu (set)length % You should use \var{setlength} to set the length of an ansi/wide/longstring % and \var{length} to get the length of such a string types cg_e_cannot_call_cons_dest_inside_with=06037_E_No es poden cridar constructors o destructors dins de la clàusula 'with' % Inside a \var{with} clause you cannot call a constructor or destructor for the % object you have in the \var{with} clause. cg_e_cannot_call_message_direct=06038_E_No es poden cridat els mètodes manipuladors de missatges directament % A message method handler method cannot be called directly if it contains an % explicit self argument cg_e_goto_inout_of_exception_block=06039_E_Hi ha un salt dins o fora d'un block d'excepció % It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}: % \begin{verbatim} % label 1; % % ... % % try % if not(final) then % goto 1; // this line will cause an error % finally % ... % end; % 1: % ... % \end{verbatim} cg_e_control_flow_outside_finally=06040_E_No es permeten les declaracions de control de flux en un bloc finally % It isn't allowed to use the control flow statements \var{break}, % \var{continue} and \var{exit} % inside a finally statement. The following example shows the problem: % \begin{verbatim} % ... % try % p; % finally % ... % exit; // This exit ISN'T allowed % end; % ... % % \end{verbatim} % If the procedure \var{p} raises an exception the finally block is % executed. If the execution reaches the exit, it's unclear what to do: % exiting the procedure or searching for another exception handler cg_w_parasize_too_big=06041_W_El tamany dels paràmetres excedeix el límit per determinades cpu's % This indicates that you are declaring more than 64k ok parameters, which % might not be supported on other processor targets. cg_w_localsize_to_big=06042_W_El tamany de la variable local excedeix el límit per determinades cpu's % This indicates that you are declaring more than 32k of local variables, which % might not be supported on other processor targets. cg_e_localsize_too_big=06043_E_Les variables locals excedeixen el límit permès % This indicates that you are declaring more than 32k of local variables, which % is not supported by this processor. cg_e_break_not_allowed=06044_E_No es permet BREAK % You're trying to use \var{break} outside a loop construction. cg_e_continue_not_allowed=06045_E_No es permet CONTINUE % You're trying to use \var{continue} outside a loop construction. % \end{description} # EndOfTeX # # Assembler reader # # 07097 is the last one used # asmr_d_start_reading=07000_DL_S'està començant l'analització del bloc d'assemblador $1 % This informs you that an assembler block is being parsed asmr_d_finish_reading=07001_DL_S'ha finalitzat l'analizació del bloc d'assemblador $1 % This informs you that an assembler block has finished. asmr_e_none_label_contain_at=07002_E_Un patró que no és una etiqueta conté @ % A identifier which isn't a label can't contain a @. asmr_e_building_record_offset=07004_E_S'ha produït un error mentre es muntava el desplaçament del registre % There has an error occured while building the offset of a record/object % structure, this can happend when there is no field specified at all or % an unknown field identifier is used. asmr_e_offset_without_identifier=07005_E_S'està utilitzant OFFSET sense identificador % You can only use OFFSET with an identifier. Other syntaxes aren't % supported asmr_e_type_without_identifier=07006_E_S'està utilitzant TYPE sense identificador % You can only use TYPE with an identifier. Other syntaxes aren't % supported asmr_e_no_local_or_para_allowed=07007_E_Aquí no es poden utilitzar variables locals o paràmetres % You can't use a local variable or parameter here, mostly because the % addressing of locals and parameters is done using the frame pointer register so the % address can't be obtained directly. asmr_e_need_offset=07008_E_Aquí heu d'utilitzar OFFSET % You need to use OFFSET here to get the address of the identifier. asmr_e_need_dollar=07009_E_Aquí heu d'utilitzar $ % You need to use $ here to get the address of the identifier. asmr_e_cant_have_multiple_relocatable_symbols=07010_E_No es poden utilitzar multiples símbols reassignats % You can't have more than one relocatable symbol (variable/typed constant) % in one argument. asmr_e_only_add_relocatable_symbol=07011_E_Els símbols reassignats només es poden afegir % Relocatable symbols (variable/typed constant) can't be used with other % operators. Only addition is allowed. asmr_e_invalid_constant_expression=07012_E_L'expressió constant no és vàlida % There is an error in the constant expression. asmr_e_relocatable_symbol_not_allowed=07013_E_No es permet el símbol reassignat % You can't use a relocatable symbol (variable/typed constant) here. asmr_e_invalid_reference_syntax=07014_E_La sintaxi de la referència no és vàlida % There is an error in the reference. asmr_e_local_para_unreachable=07015_E_No podeu accedir a $1 des d'aquest codi % You can not read directly the value of local or para % of a higher level in assembler code (except for % local assembler code without parameter nor locals). asmr_e_local_label_not_allowed_as_ref=07016_E_No es permeten els símbols i etiquetes locals com a referències % You can't use local symbols/labels as references asmr_e_wrong_base_index=07017_E_L'utilització de la base i índex del registre no és vàlida % There is an error with the base and index register, they are % probably incorrect asmr_w_possible_object_field_bug=07018_W_Hi ha un possible error en la manipulació del camp de l'objecte % Fields of objects or classes can be reached directly in normal or objfpc % modes but TP and Delphi modes treat the field name as a simple offset. asmr_e_wrong_scale_factor=07019_E_S'ha especificat un factor de l'escala erroni % The scale factor given is wrong, only 1,2,4 and 8 are allowed asmr_e_multiple_index=07020_E_S'estan utilitzant múltiples registres d'índex % You are trying to use more than one index register asmr_e_invalid_operand_type=07021_E_El tipus de l'operand no és vàlid % The operand type doesn't match with the opcode used asmr_e_invalid_string_as_opcode_operand=07022_E_La cadena $1 no és vàlida com operand opcode % The string specified as operand is not correct with this opcode asmr_w_CODE_and_DATA_not_supported=07023_W_No es permet l'ús de @CODE i @DATA % @CODE and @DATA are unsupported and are ignored. asmr_e_null_label_ref_not_allowed=07024_E_No es permeten les referències a etiquetes nul·les asmr_e_expr_zero_divide=07025_E_Divisió per zero en l'avaluador asm % There is a division by zero in a constant expression asmr_e_expr_illegal=07026_E_L'expressió és il·legal % There is an illegal expression in a constant expression asmr_e_escape_seq_ignored=07027_E_S'ignora la seqüència d'escapament: $1 % There is a C-styled string, but the escape sequence in the string % is unknown, and is therefore ignored asmr_e_invalid_symbol_ref=07028_E_La referència del símbol no és vàlida asmr_w_fwait_emu_prob=07029_W_Fwait pot causar problemes d'emulació amb emu387 asmr_w_fadd_to_faddp=07030_W_S'ha traduït $1 sense operand a $1P asmr_w_enter_not_supported_by_linux=07031_W_El Kernel del Linux no permet l'instrucció ENTER % ENTER instruction can generate a stack page fault that is not % caught correctly by the i386 Linux page handler. asmr_w_calling_overload_func=07032_W_S'està cridant a una funció sobrecarregada en asm % There is a call to an overloaded method in the assembler block, % this might be the sign there is a problem asmr_e_unsupported_symbol_type=07033_E_El tipus del símbol no és compatible amb l'operand asmr_e_constant_out_of_bounds=07034_E_El valor de la constant està fora dels límits asmr_e_error_converting_decimal=07035_E_S'ha produït un error mentre es convertia el decimal $1 % A constant decimal value doen not have the correct syntax asmr_e_error_converting_octal=07036_E_S'ha produït un error mentre es convertia l'octal $1 % A constant octal value does not have the correct syntax asmr_e_error_converting_binary=07037_E_S'ha produït un error mentre es convertia el binari $1 % A constant binary value does not have the correct syntax asmr_e_error_converting_hexadecimal=07038_E_S'ha produït un error mentre es convertia l'hexadecimal $1 % A constant hexadecimal value does not have the correct syntax asmr_h_direct_global_to_mangled=07039_H_S'ha traduït $1 a $2 asmr_w_direct_global_is_overloaded_func=07040_W_$1 està associat a una funció sobrecarregada asmr_e_cannot_use_SELF_outside_a_method=07041_E_No es pot utilitzar SELF fora d'un mètode % There is a reference to the \var{self} symbol while it is not % allowed. \var{self} can only be referenced inside methods asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_No es pot utilitzar OLDEBP fora d'un procediment niat % There is a reference to the \var{oldebp} symbol while it is not % allowed. \var{oldebp} can only be referenced inside nested routines asmr_e_void_function=07043_W_Els procediments no poden retornar cap valor en codi asm % Trying to return a value while in a procedure. A procedure % does not have any return value asmr_e_SEG_not_supported=07044_E_No es permet SEG asmr_e_size_suffix_and_dest_dont_match=07045_E_El tamany de sufix i objectiu o el tamany de l'origen no concorden % The register size and the opcode size suffix does not match. This is % probably an error in the assembler statement asmr_w_size_suffix_and_dest_dont_match=07046_W_El tamany de sufix i objectiu o el tamany de l'origen no concorden % The register size and the opcode size suffix does not match. This is % probably an error in the assembler statement asmr_e_syntax_error=07047_E_Error de sintaxi de l'assemblador % There is an assembler syntax error asmr_e_invalid_opcode_and_operand=07048_E_La combinació d'opcode i operands no és vàlida % The opcode cannot be used with this type of operand asmr_e_syn_operand=07049_E_S'ha trobat un error de sintaxi de l'assemblador en l'operand asmr_e_syn_constant=07050_E_S'ha trobat un error de sintaxi de l'assemblador en la constant asmr_e_invalid_string_expression=07051_E_L'expressió de la cadena no és vàlida asmr_w_const32bit_for_address=07052_W_Constant amb símbol $1 per una adreça que no és en un punter % A constant expression represents an address which does not fit % into a pointer. The address is probably incorrect asmr_e_unknown_opcode=07053_E_Es desconeix l'opcode $1 % This opcode is not known asmr_e_invalid_or_missing_opcode=07054_E_Falta opcode o no és vàlid asmr_e_invalid_prefix_and_opcode=07055_E_La combinació del prefix i l'opcode $1 no és vàlida asmr_e_invalid_override_and_opcode=07056_E_La combinació de override i opcode $1 no és vàlida asmr_e_too_many_operands=07057_E_Hi ha massa operands en la línia % There are too many operands for this opcode. Check your % assembler syntax asmr_w_near_ignored=07058_W_S'ignora NEAR asmr_w_far_ignored=07059_W_S'ignora FAR asmr_e_dup_local_sym=07060_E_El símbol local $1 està duplicat asmr_e_unknown_local_sym=07061_E_El símbol local $1 no està definit asmr_e_unknown_label_identifier=07062_E_No es coneix l'identificador de l''etiqueta $1 asmr_e_invalid_register=07063_E_El nom del registre no és vàlid % There is an unknown register name used as operand asmr_e_invalid_fpu_register=07064_E_El nom del registre de punt flotant no és vàlid asmr_w_modulo_not_supported=07066_W_No es permet l'ús del mòdul asmr_e_invalid_float_const=07067_E_La constant de punt flotant $1 no és vàlida % The floating point constant declared in an assembler block is invalid asmr_e_invalid_float_expr=07068_E_L'expressió de punt flotant no és vàlida % The floating point expression declared in an assembler block is invalid asmr_e_wrong_sym_type=07069_E_El tipus del símbol no és correcte asmr_e_cannot_index_relative_var=07070_E_No es pot indexar una variable local o un paràmetre amb un registre % Trying to index using a base register a symbol which is already relative % to a register. This is not possible, and will probably lead to crashes. asmr_e_invalid_seg_override=07071_E_L'expressió que sobreescriu el segment no és vàlida asmr_w_id_supposed_external=07072_W_S'assumeix l'identificador $1 com extern % There is a reference to an undefined symbol. This will not result % in an error, since the symbol might be external, but may cause % problems at link time if the symbol is not defined anywhere. asmr_e_string_not_allowed_as_const=07073_E_No es permeten les cadenes com a constants % Character strings are not allowed as constants. asmr_e_no_var_type_specified=07074_E_No s'ha especificat el tipus de la variable % The syntax expects a type idenfitifer after the dot, but % none was found. asmr_w_assembler_code_not_returned_to_text=07075_E_El codi de l'assemblador no ha retornat a la secció de text % There was a directive in the assembler block to change sections, % but there is a missing return to the text section at the end % of the assembler block. This might cause errors during link time. asmr_e_not_directive_or_local_symbol=07076_E_$1 no és una directiva o un símbol local % This symbol is unknown. asmr_w_using_defined_as_local=07077_E_S'està utilitzant un nom definit com una etiqueta local asmr_e_dollar_without_identifier=07078_E_S'està utilitzant el símbol Dol·lar sense un identificador % A constant expression has an identifier which does not start with % the $ symbol. asmr_w_32bit_const_for_address=07079_W_L'adreça ha creat una constant de 32bit % A constant was used as an address. This is probably an error, % since using absolute addresses will probably not work. asmr_n_align_is_target_specific=07080_N_.align és específic de la plataforma, utilitzeu .balign o .p2align % Using the .align directive is platform specific, and its meaning will vary % from one platform to another. asmr_e_cannot_access_field_directly_for_parameters=07081_E_Els paràmetres no poden accedir directament als camps % You should load the parameter first into a register and then access the % fields using that register. asmr_e_cannot_access_object_field_directly=07082_E_No es pot accedir directament als camps dels objectes o classes % You should load the self pointer first into a register and then access the % fields using the register as base. By default the self pointer is available % in the esi register on i386. asmr_e_unable_to_determine_reference_size=07083_E_No s'ha especificat el tamany i no es pot determinar el tamany dels operands % You should specify explicity a size for the reference, because % compiler is unable to determine what size (byte, word, dword, etc.) it % should use for the reference. asmr_e_cannot_use_RESULT_here=07084_E_No es pot utilitzar RESULT en aquesta funció % Some functions which return complex types cannot use the \var{result} % keyword. asmr_w_adding_explicit_args_fXX=07086_W_"$1" sense operand s'ha traduït a "$1 %st,%st(1)" asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" s'ha traduït a "$1 %st,%st(n)" asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" s'ha traduït a "$1 %st(n),%st" asmr_e_invalid_char_smaller=07089_E_Aquí no es permet el caràcter < % The shift operator requires the << characters. Only one % of those characters was found. asmr_e_invalid_char_greater=07090_E_Aquí no es permet el caràcter > % The shift operator requires the >> characters. Only one % of those characters was found. asmr_w_align_not_supported=07093_W_No es permet l'ús d'ALIGN asmr_e_no_inc_and_dec_together=07094_E_Inc i Dec no poden estar junts % Trying to use an increment and a decrement within the same % opcode on the 680x0. This is impossible. asmr_e_invalid_reg_list_in_movem=07095_E_El reglist no és vàlid pel movem % Trying to use the \var{movem} opcode with invalid registers % to save or restore. asmr_e_invalid_reg_list_for_opcode=07096_E_El reglist no és vàlid per l'opcode asmr_e_68020_mode_required=07097_E_Es requereix un mode de cpu més alt ($1) % Trying to use an instruction which is not supported in the current % cpu mode. Use a higher cpu generation to be able to use this % opcode in your assembler block asmr_w_unable_to_determine_reference_size_using_dword=07098_W_No s'ha especificat i no es pot determinar el tamany dels operands, s'està utilitzant DWORD com a predeterminat % You should specify explicitly a size for the reference, because % the compiler is unable to determine what size (byte,word,dword,etc.) it % should use for the reference. This warning is only used in Delphi mode where % it falls back to use DWORD as default. asmr_e_illegal_shifterop_syntax=07099_E_S'ha trobat un error de sintaxi mentre s'analitzava un operand desplaçat % ARM only, ARM assembler supports a so called shifter operand. The used syntax isn't % a valid shifter operand. Example for an operation with shifter operand: % \begin{verbatim} % asm % orr r2,r2,r2,lsl #8 % end; % \end{verbatim} # # Assembler/binary writers # # 08018 is the last one used # asmw_f_too_many_asm_files=08000_F_Hi ha massa arxius d'assemblador oberts % With smartlinking enabled, there are too many assembler % files generated. Disable smartlinking. asmw_f_assembler_output_not_supported=08001_F_L'assemblador de sortida seleccionat no és compatible asmw_f_comp_not_supported=08002_F_No es permet l'ús de COMP asmw_f_direct_not_supported=08003_F_Direct no és compatible amb els escriptors binaris % Direct assembler mode is not supported for binary writers. asmw_e_alloc_data_only_in_bss=08004_E_Només es permet l'assignació de dades en la secció bss asmw_f_no_binary_writer_selected=08005_F_No s'ha seleccionat un escriptor binari asmw_e_opcode_not_in_table=08006_E_Asm: L'opcode $1 no és a la taula asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 la combinació d'opcode i operands no és vàlida asmw_e_16bit_not_supported=08008_E_Asm: No es permeten les referències de 16 Bits asmw_e_invalid_effective_address=08009_E_Asm: L'adreça actual no és vàlida asmw_e_immediate_or_reference_expected=08010_E_Asm: S'esperava immediat o referència asmw_e_value_exceeds_bounds=08011_E_Asm: el valor $1 excedeix el límit $2 asmw_e_short_jmp_out_of_range=08012_E_Asm: El salt curt està fora de l'abast $1 asmw_e_undefined_label=08013_E_Asm: L'etiqueta $1 no està definida asmw_e_comp_not_supported=08014_E_Asm: El tipus comp no està permès en aquest objectiu asmw_e_extended_not_supported=08015_E_Asm: El tipus Extended no està permès en aquest objectiu asmw_e_duplicate_label=08016_E_Asm: L'etiqueta $1 està duplicada asmw_e_redefined_label=08017_E_Asm: S'ha tornat a definir l'etiqueta $1 asmw_e_first_defined_label=08018_E_Asm: Aquí s'ha definit primer asmw_e_invalid_register=08019_E_Asm: el registre $1 no és vàlid # # Executing linker/assembler # # 09034 is the last one used # # BeginOfTeX % % \section{Errors of assembling/linking stage} % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} exec_w_source_os_redefined=09000_W_S'ha tornat a definir el SO d'origen exec_i_assembling_pipe=09001_I_S'està assemblant (canonada) $1 exec_d_cant_create_asmfile=09002_E_No es pot crear el fitxer d'assemblador $1 % The mentioned file can't be create. Check if you've % permission to create this file exec_e_cant_create_objectfile=09003_E_No es pot creat el fitxer objecte $1 % The mentioned file can't be create. Check if you've % permission to create this file exec_e_cant_create_archivefile=09004_E_No es pot crear l'arxiu $1 % The mentioned file can't be create. Check if you've % permission to create this file exec_w_assembler_not_found=09005_W_No s'ha trobat l'assemblador $1, s'està canviant a assemblament extern exec_t_using_assembler=09006_T_S'està utilitzant l'assemblador $1 exec_w_error_while_assembling=09007_W_S'ha produït un error mentre s'assemblava el codi de sortida $1 % There was an error while assembling the file using an external assembler. % Consult the documentation of the assembler tool to find out more information % on this error. exec_w_cant_call_assembler=09008_W_No es pot cridar l'assemblador, error $1 canviant a assemblament extern exec_i_assembling=09009_I_S'està assemblant $1 exec_i_assembling_smart=09010_I_S'està assemblant amb enllaçament intel·ligent $1 exec_w_objfile_not_found=09011_W_No s'ha trobat l'objecte $1, l'enllaçament pot fallar ! % One of the object file is missing, and linking will probably fail. % Check your paths. exec_w_libfile_not_found=09012_W_No s'ha trobat la biblioteca $1, l'enllaçament pot fallar ! % One of the library file is missing, and linking will probably fail. % Check your paths. exec_w_error_while_linking=09013_W_S'ha produït un error mentre s'enllaçava % Generic error while linking. exec_w_cant_call_linker=09014_W_No es pot cridar l'enllaçador, s'està canviant a l'enllaçament extern exec_i_linking=09015_I_S'està enllaçant $1 exec_w_util_not_found=09016_W_No s'ha trobat l'utilitat $1, s'està canviant a enllaçament extern exec_t_using_util=09017_T_S'està utilitzant l'utilitat $1 exec_e_exe_not_supported=09018_E_No es permet la creació d'executables exec_e_dll_not_supported=09019_E_No es permet la creació de biblioteques dinàmiques/compartides exec_i_closing_script=09020_I_S'està tancant la seqüència $1 exec_w_res_not_found=09021_W_No s'ha trobat el compilador del recurs, s'està canviant a mode extern exec_i_compilingresource=09022_I_S'està compilant el recurs $1 exec_t_unit_not_static_linkable_switch_to_smart=09023_T_No es pot enllaçar estàticament l'unitat $1, s'està canviant a enllaçament intel·ligent exec_t_unit_not_smart_linkable_switch_to_static=09024_T_No es pot utilitzar l'enllaçament intel·ligent amb l'unitat $1, s'està canviant a enllaçament estàtic. exec_t_unit_not_shared_linkable_switch_to_static=09025_T_No es pot utilitzar l'enllaçament compartit amb l'unitat $1, s'està canviant a enllaçament estàtic exec_e_unit_not_smart_or_static_linkable=09026_E_No es pot enllaçar l'unitat $1 ni estàticament ni dinàmicament exec_e_unit_not_shared_or_static_linkable=09027_E_No es pot utilitzar l'enllaçament compartit ni estàtic amb l'unitat $1. %\end{description} # EndOfTeX # # Executable information # execinfo_f_cant_process_executable=09128_F_No es pot post-processar l'executable $1 execinfo_f_cant_open_executable=09129_F_No es pot obrir l'executable $1 execinfo_x_codesize=09130_X_Tamany del codi: $1 octets execinfo_x_initdatasize=09131_X_Tamany de les dades inicialitzades: $1 octets execinfo_x_uninitdatasize=09132_X_Tamany de les dades sense inicialitzar: $1 octets execinfo_x_stackreserve=09133_X_Espai reservat per la pila: $1 octets execinfo_x_stackcommit=09134_X_Espai utilitzat per la pila: $1 octets # # Unit loading # # 10041 is the last used one # # BeginOfTeX % \section{Unit loading messages.} % This section lists all messages that can occur when the compiler is % loading a unit from disk into memory. Many of these messages are % informational messages. % \begin{description} unit_t_unitsearch=10000_T_S'està cercant l'unitat: $1 % When you use the \var{-vt}, the compiler tells you where it tries to find % unit files. unit_t_ppu_loading=10001_T_S'està carregant la PPU $1 % When the \var{-vt} switch is used, the compiler tells you % what units it loads. unit_u_ppu_name=10002_U_Nom de la PPU: $1 % When you use the \var{-vu} flag, the unit name is shown. unit_u_ppu_flags=10003_U_Senyaladors de la PPU: $1 % When you use the \var{-vu} flag, the unit flags are shown. unit_u_ppu_crc=10004_U_Crc de la PPU: $1 % When you use the \var{-vu} flag, the unit CRC check is shown. unit_u_ppu_time=10005_U_Temps de la PPU: $1 % When you use the \var{-vu} flag, the unit time is shown. unit_u_ppu_file_too_short=10006_U_El fitxer PPU és massa curt % When you use the \var{-vu} flag, the unit time is shown. unit_u_ppu_invalid_header=10007_U_L'encapçalament de la PPU no és vàlid (no hi ha PPU al principi) % A unit file contains as the first three bytes the ascii codes of \var{PPU} unit_u_ppu_invalid_version=10008_U_La versió $1 de la PPU no és vàlida % This unit file was compiled with a different version of the compiler, and % cannot be read. unit_u_ppu_invalid_processor=10009_U_La PPU està compilada per a un altre processador % This unit file was compiled for a different processor type, and % cannot be read unit_u_ppu_invalid_target=10010_U_La PPU està compilada per un altre objectiu % This unit file was compiled for a different processor type, and % cannot be read unit_u_ppu_source=10011_U_font PPU: $1 % When you use the \var{-vu} flag, the unit CRC check is shown. unit_u_ppu_write=10012_U_S'està escrivint $1 % When you specify the \var{-vu} switch, the compiler will tell you where it % writes the unit file. unit_f_ppu_cannot_write=10013_F_No es pot escriure el fitxer PPU % An error occurred when writing the unit file. unit_f_ppu_read_error=10014_F_No es pot llegir el fitxer PPU % This means that the unit file was corrupted, and contains invalid % information. Recompilation will be necessary. unit_f_ppu_read_unexpected_end=10015_F_No s'esperava el final del fitxer PPU % Unexpected end of file. This may mean that the PPU file is % corrupted. unit_f_ppu_invalid_entry=10016_F_Entrada invàlida en el fitxer PPU: $1 % The unit the compiler is trying to read is corrupted, or generated with a % newer version of the compiler. unit_f_ppu_dbx_count_problem=10017_F_Hi ha hagut un problema calculant el Dbx de la PPU % There is an inconsistency in the debugging information of the unit. unit_e_illegal_unit_name=10018_E_El nom de l'unitat és il·legal: $1 % The name of the unit doesn't match the file name. unit_f_too_much_units=10019_F_Hi ha massa unitats % \fpc has a limit of 1024 units in a program. You can change this behavior % by changing the \var{maxunits} constant in the \file{files.pas} file of the % compiler, and recompiling the compiler. unit_f_circular_unit_reference=10020_F_Hi ha una referència circular entre les unitats $1 i $2 % Two units are using each other in the interface part. This is only allowed % in the \var{implementation} part. At least one unit must contain the other one % in the \var{implementation} section. unit_f_cant_compile_unit=10021_F_No es pot compilar l'unitat $1, no hi ha les fonts disponibles % A unit was found that needs to be recompiled, but no sources are % available. unit_f_cant_find_ppu=10022_F_No es pot trobar l'unitat $1 % You tried to use a unit of which the PPU file isn't found by the % compiler. Check your config files for the unit pathes unit_w_unit_name_error=10023_W_No es pot trobar l'unitat $1, però hi ha la $2 unit_f_unit_name_error=10024_F_S'estava cercant l'unitat $1, però s'ha trobat $2 % Dos truncation of 8 letters for unit PPU files % may lead to problems when unit name is longer than 8 letters. unit_w_switch_us_missed=10025_W_Per compilar l'unitat System es necessita el commutador -Us % When recompiling the system unit (it needs special treatment), the % \var{-Us} must be specified. unit_f_errors_in_unit=10026_F_Hi ha hagut $1 errors compilant el mòdul, s'ha aturat! % When the compiler encounters a fatal error or too many errors in a module % then it stops with this message. unit_u_load_unit=10027_U_S'està carregant desde $1 ($2) l'unitat $3 % When you use the \var{-vu} flag, which unit is loaded from which unit is % shown. unit_u_recompile_crc_change=10028_U_S'està tornant a compilar $1, s'ha canviat la suma de verificació a $2 unit_u_recompile_source_found_alone=10029_U_S'està tornant a compilar $1, només s'han trobat les fonts % When you use the \var{-vu} flag, these messages tell you why the current % unit is recompiled. unit_u_recompile_staticlib_is_older=10030_U_S'està tornant a compilar l'unitat, la biblioteca estàtica és més vella que el fitxer ppu % When you use the \var{-vu} flag, the compiler warns if the static library % of the unit are older than the unit file itself. unit_u_recompile_sharedlib_is_older=10031_U_S'està tornant a compilar l'unitat, la biblioteca compartida és més vella que el fitxer ppu % When you use the \var{-vu} flag, the compiler warns if the shared library % of the unit are older than the unit file itself. unit_u_recompile_obj_and_asm_older=10032_U_S'està tornant a compilar l'unitat, obj i asm son més vells que el fitxer ppu % When you use the \var{-vu} flag, the compiler warns if the assembler of % object file of the unit are older than the unit file itself. unit_u_recompile_obj_older_than_asm=10033_U_S'està tornant a compilar l'unitat, obj és més vell que asm % When you use the \var{-vu} flag, the compiler warns if the assembler % file of the unit is older than the object file of the unit. unit_u_parsing_interface=10034_U_S'està analitzant l'interfície de $1 % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the interface part of the unit unit_u_parsing_implementation=10035_U_S'està analitzant l'implementació de $1 % When you use the \var{-vu} flag, the compiler warns that it starts % parsing the implementation part of the unit unit_u_second_load_unit=10036_U_S'està carregant l'unitat $1 per segona vegada % When you use the \var{-vu} flag, the compiler warns that it starts % recompiling a unit for the second time. This can happend with interdepend % units. unit_u_check_time=10037_U_S'està comprovant el fitxer PPU $1 temps $2 % When you use the \var{-vu} flag, the compiler show the filename and % date and time of the file which a recompile depends on ### The following two error msgs is currently disabled # unit_h_cond_not_set_in_last_compile=10038_H_El condicional $1 no ha estat inicialitzat al començament de la última compilació de $2 # % When recompilation of an unit ies required the compiler will check that # % the same conditionals are set for the recompilation. The compiler has # % found a conditional that currently is defined, but was not used the last # % time the unit was compiled # unit_h_cond_set_in_last_compile=10039_H_El condicional $1 ha estat inicialitzat al començament de la última compilació de $2 # % When recompilation of an unit is required the compiler will check that # % the same conditionals are set for the recompilation. The compiler has # % found a conditional that was used the last time the unit was compiled, but # % the conditional is currently not defined. unit_w_cant_compile_unit_with_changed_incfile=10040_W_No es pot tornar a compilar l'unitat $1, però s'han trobat fitxers inclosos modificats % A unit was found to have modified include files, but % some source files were not found, so recompilation is impossible. unit_h_source_modified=10041_H_El fitxer $1 és més nou que la versió de la PPU $2 % A modified source file for a unit was found that was compiled with the % release flag (-Ur). The unit will not implicitly be recompiled because % this release flag is set. unit_u_ppu_invalid_fpumode=10042_U_S'està utilitzant una unitat la qual no ha estat compilada amb el mode FPU correcte % Trying to compile code while using units which were not compiled with % the same floating point format mode. Either all code should be compiled % with FPU emulation on, or with FPU emulation off. unit_u_loading_interface_units=10043_U_S'estan carregant les unitats d'INTERFACE desde $1 % When you use the \var{-vu} flag, the compiler warms that it starts % loading the units defined in the interface part of the unit unit_u_loading_implementation_units=10044_U_S'estan carregant les unitat d'IMPLEMENTATION desde $1 % When you use the \var{-vu} flag, the compiler warms that it starts % loading the units defined in the implementation part of the unit unit_u_interface_crc_changed=10045_U_L'interfície CRC ha canviat per la unitat $1 % When you use the \var{-vu} flag, the compiler warms that it the % CRC calculated for the interface has been changed after the implementation % has been parsed unit_u_implementation_crc_changed=10046_U_L'implementació CRC ha canviat per l'unitat $1 % When you use the \var{-vu} flag, the compiler warms that it the % CRC calculated has been changed after the implementation % has been parsed unit_u_finished_compiling=10047_U_S'ha acabat la compilació de l'unitat $1 % When you use the \var{-vu} flag, the compiler warms that it % has finished compiling the unit unit_u_add_depend_to=10048_U_S'ha afegit la dependència de $1 a $2 % When you use the \var{-vu} flag, the compiler warms that it % has added a dependency between the two units unit_u_no_reload_is_caller=10049_U_No es torna a carregar, es crida: $1 % When you use the \var{-vu} flag, the compiler warms that it % has will not reload the unit because it is the unit that wants % to load this unit unit_u_no_reload_in_second_compile=10050_U_No es torna a carregar, ja és en segona compilació: $1 % When you use the \var{-vu} flag, the compiler warms that it % has will not reload the unit because it is already in a second recompile unit_u_flag_for_reload=10051_U_Senyalador per la recàrrega: $1 % When you use the \var{-vu} flag, the compiler warms that it % has to reload the unit unit_u_forced_reload=10052_U_Es torna a carregar forçadament % When you use the \var{-vu} flag, the compiler warms that it % has is reloading the unit because it was required unit_u_previous_state=10053_U_Estat previ de $1: $2 % When you use the \var{-vu} flag, the compiler shows the % previous state of the unit unit_u_second_compile_unit=10054_U_S'està compilant l'unitat $1 per segona vegada % When you use the \var{-vu} flag, the compiler warms that it starts % recompiling a unit for the second time. This can happend with independent % units unit_u_loading_unit=10055_U_S'està carregant l'unitat $1 % When you use the \var{-vu} flag, the compiler warms that it starts % loading the unit unit_u_finished_loading_unit=10056_U_S'ha acabat la càrrega de l'unitat $1 % When you use the \var{-vu} flag, the compiler warms that it finished % loading the unit unit_u_registering_new_unit=10057_U_S'està registrant l'unitat nova $1 % When you use the \var{-vu} flag, the compiler warms that it has % found a new unit and registers it in the internal lists unit_u_reresolving_unit=10058_U_S'està tornant a resoldre l'unitat $1 % When you use the \var{-vu} flag, the compiler warms that it % has to recalculate the internal data of the unit unit_u_skipping_reresolving_unit=10059_U_No es torna a resoldre l'unitat $1, encara s'estan carregant les unitats utilitzades % When you use the \var{-vu} flag, the compiler warms that it % skips to recalculate the internal data of the unit because there % is no data to racalculate % \end{description} # EndOfTeX # # Options # # 11039 is the las used one # option_usage=11000_O_$1 [opcions] [opcions] # BeginOfTeX % % \section{Command-line handling errors} % This section lists errors that occur when the compiler is processing the % command line or handling the configuration files. % \begin{description} option_only_one_source_support=11001_W_Només es permet un fitxer font % You can specify only one source file on the command line. The first % one will be compiled, others will be ignored. This may indicate that % you forgot a \var{'-'} sign. option_def_only_for_os2=11002_W_El fitxer DEF només pot ser creat per OS/2 % This option can only be specified when you're compiling for OS/2 option_no_nested_response_file=11003_E_No es permeten els fitxers de resposta niats % you cannot nest response files with the \var{@file} command-line option. option_no_source_found=11004_F_No hi ha el nom del fitxer font en la línia d'ordres % The compiler expects a source file name on the command line. option_no_option_found=11005_N_No hi ha cap opció dins del fitxer de configuració $1 % The compiler didn't find any option in that config file. option_illegal_para=11006_E_El paràmetre $1 és il·legal % You specified an unknown option. option_help_pages_para=11007_H_-? escriu las pàgines de l'ajuda % When an unknown option is given, this message is diplayed. option_too_many_cfg_files=11008_F_Hi ha massa fitxers de configuració niats % You can only nest up to 16 config files. option_unable_open_file=11009_F_No es pot obrir el fitxer $1 % The option file cannot be found. option_reading_further_from=11010_N_S'estan llegint les opcions addicionals de $1 % Displayed when you have notes turned on, and the compiler switches % to another options file. option_target_is_already_set=11011_W_L'objectiu ja està posat a $1 % Displayed if more than one \var{-T} option is specified. option_no_shared_lib_under_dos=11012_W_Les biblioteques compartides no estan permeses en la plataforma DOS, es canvia a estàtiques % If you specify \var{-CD} for the \dos platform, this message is displayed. % The compiler supports only static libraries under \dos option_too_many_ifdef=11013_F_Hi ha massa IF(N)DEFs % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_too_many_endif=11014_F_Hi ha massa ENDIFs % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_too_less_endif=11015_F_Hi ha un condicional obert al final del fitxer % the \var{\#IF(N)DEF} statements in the options file are not balanced with % the \var{\#ENDIF} statements. option_no_debug_support=11016_W_Aquest executable no permet la generació d'informació del depurador % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. option_no_debug_support_recompile_fpc=11017_H_Proveu de tornar a compilar amb -dGDB % It is possible to have a compiler executable that doesn't support % the generation of debugging info. If you use such an executable with the % \var{-g} switch, this warning will be displayed. option_obsolete_switch=11018_E_Esteu utilitzant el commutador obsolet $1 % this warns you when you use a switch that is not needed/supported anymore. % It is recommended that you remove the switch to overcome problems in the % future, when the switch meaning may change. option_obsolete_switch_use_new=11019_E_Esteu utilitzant el commutador obsolet $1, si us plau, utilitzeu $2 % this warns you when you use a switch that is not supported anymore. You % must now use the second switch instead. % It is recommended that you change the switch to overcome problems in the % future, when the switch meaning may change. option_switch_bin_to_src_assembler=11020_N_S'està canviant a assemblador d'escriptura del codi font a predeterminat % this notifies you that the assembler has been changed because you used the % -a switch which can't be used with a binary assembler writer. option_incompatible_asm=11021_W_La sortida de l'assemblador seleccionada "$1" no és compatible amb "$2" option_asm_forced=11022_W_S'utilitza l'assemblador "$1" forçadament % The assembler output selected can not generate % object files with the correct format. Therefore, the % default assembler for this target is used instead. option_using_file=11026_T_S'estan llegint les opcions del fitxer $1 % Options are also read from this file option_using_env=11027_T_S'estan llegint les opcions des de l'entorn $1 % Options are also read from this environment string option_handling_option=11028_D_S'està gestionant l'opció "$1" % Debug info that an option is found and will be handled option_help_press_enter=11029__*** Premeu *** option_start_reading_configfile=11030_H_S'està començant a llegir el fitxer de configuració $1 % Starting of config file parsing. option_end_reading_configfile=11031_H_S'ha acabat de llegir el fitxer de configuració $1 % End of config file parsing option_interpreting_option=11032_D_S'està executant l'opció "$1" option_interpreting_firstpass_option=11036_D_S'està executant l'opció "$1" per 1ª vegada option_interpreting_file_option=11033_D_S'està executant l'opció del fitxer "$1" option_read_config_file=11034_D=11034_D_S'està llegint el fitxer de configuració "$1" option_found_file=11035_D_S'ha trobat el nom del fitxer font "$1" % Additional infos about options, displayed % when you have debug option turned on. option_code_page_not_available=11039_E_La pàgina del codi no està disponible %\end{description} # EndOfTeX # # Logo (option -l) # option_logo=11023_[ Free Pascal Compiler versió $FPCFULLVERSION [$FPCDATE] per $FPCCPU Copyright (c) 1993-2020 per Florian Klaempfl and others ] # # Info (option -i) # option_info=11024_[ Free Pascal Compiler versió $FPCVERSION Data del compilador : $FPCDATE CPU del compilador : $FPCCPU Plataformes compatibles : $OSTARGETS Aquest programa ve sota la Llicència Pública General de GNU Per a més informació llegiu COPYING.v2 Comuniqueu les errades, suggeriments, etc a: https://bugs.freepascal.org ] # # Help pages (option -? and -h) # # The first character on the line indicates who will display this # line, the current possibilities are : # * = every target # 3 = 80x86 targets # 6 = 680x0 targets # e = in extended debug mode only # P = PowerPC targets # S = Sparc targets # V = Virtual machine targets # The second character also indicates who will display this line, # (if the above character was TRUE) the current possibilities are : # * = everyone # g = with GDB info supported by the compiler # O = OS/2 # L = UNIX systems # The third character represents the indentation level. # option_help_pages=11025_[ **0*_Poseu + després d'un commutador booleà per activar-lo, - per desactivar-lo **1a_El compilador no eliminarà el fitxer d'assemblador generat **2al_Escriu les línies del codi font en el fitxer de l'assemblador **2an_Escriu l'informació del node en el fitxer d'assemblador *L2ap_Utilitza canonades en lloc de crear fitxers temporals d'assemblador **2ar_Escriu info.d'alotj/desalotj del registre en el fitxer d'assemblador **2at_Escriu info.d'alotj/desalotj temporal en el fitxer d'assemblador **1A_format de la sortida: **2Adefault_Utilitza assemblador predeterminat 3*2Aas_Utilitza assemblador GNU AS 3*2Anasmcoff_fitxer coff (Go32v2) utilitzant Nasm 3*2Aasmelf_fitxer elf32 (Linux) utilitzant Nasm 3*2Anasmwin32_fitxer objecte Win32 utilitzant Nasm 3*2Anasmwdosx_fitxer objecte Win32/WDOSX utilitzant Nasm 3*2Awasm_fitxer objecte utilitzant Wasm (Watcom) 3*2Anasmobj_fitxer objecte utilitzant Nasm 3*2Amasm_fitxer objecte utilitzant Masm (Microsoft) 3*2Atasm_fitxer objecte utilitzant Tasm (Borland) 3*2Aelf_elf32 (Linux) utilitzant escriptor intern 3*2Acoff_coff (Go32v2) utilitzant escriptor intern 3*2Apecoff_pecoff (Win32) utilitzant escriptor intern 4*2Aas_assemblar utilitzant el GNU AS 6*2Aas_fitxer objecte Unix utilitzant GNU AS 6*2Agas_assemblador GNU Motorola 6*2Amit_sintaxi MIT (antiga GAS) 6*2Amot_assemblador Motorola estàndard A*2Aas_assemblar utilitzant GNU AS P*2Aas_assemblar utilitzant GNU AS S*2Aas_assemblar utilitzant GNU AS **1b_Genera informació de navegador **2bl_Genera informació dels símbols locals **1B_Munta tots els mòduls **1C_Opcions de generació del codi: **2Cc_predetermina la convenció de crida a **2CD_Crea biblioteca dinàmica **2Ce_Compilació amb opcodes emulats de coma flotant **2Cf_Selecciona instrucció fpu a utilitzar per **2Cg_Genera codi PIC **2Ch_ octets de la pila (entre 1023 i 67107840) **2Ci_Comprova E/S **2Cn_Omet l'enllaçament **2Co_Comprova el desbordament de les operacions amb enters **2Cr_Comprova l'abast **2CR_Verifica la validesa de la crida dels objectes del mètode **2Cs_Posa el tamany de la pila a **2Ct_Comprova la pila **2CX_Crea també biblioteca enllaçada intel·ligentment **1d_Defineix el símbol **1D_Genera un fitxer DEF **2Dd_Posa la descripció a **2Dv_Posa la versió de DLL a *O2Dw_Aplicació PM **1e_Posa el camí a l'executable **1E_Igual que -Cn **1F_Posa els noms dels fitxers i els camins: **2Fa[,y]_Carrega primer les unitats i [y], abans d'analitzar USES **2Fc_Posa la pàgina del codi d'entrada a **2FD_Posa el directori on buscar les utilitats del compilador **2Fe_Redirigeix la sortida dels errors a **2FE_Posa el path de sortida d'executables i unitats a **2Fi_Afegeix al camí dels inclosos **2Fl_Afegeix al camí de les llibreries **2FL_Utilitza com enllaçador dinàmic **2Fo_Afegeix al camí dels objectes **2Fr_Carrega el fitxer de missatges d'error **2Fu_Afegeix al camí de les unitats **2FU_Posa camí sortida de les unitats a , substitueix -FE *g1g_Genera informació del depurador: *g2gc_genera controls pels punters *g2gd_Utilitza dbx *g2gg_Utilitza gsym *g2gh_Utilitza l'unitat de traçat de la pila (depura pèrdua de memòria) *g2gl_Utilitza l'unitat d'info. per mostrar +info per seguiments inversos *g2gv_Genera programes traçables amb valgrind *g2gw_Genera informació de depuració dwarf **1i_Informació: **2iD_Retorna la data del compilador **2iV_Retorna la versió del compilador **2iSO_Retorna el SO d'origen **2iSP_Retorna el processador d'origen **2iTO_Retorna el SO de destí **2iTP_Retorna el processador de destí **1I_Afegeix a la trajec.d'afegits **1k_Passa a l'enllaçador **1l_Escriu el logotipus **1M_Fica el mode del llenguatge a **2Mfpc_dialecte Free Pascal (predeterminat) **2Mobjfpc_Activa algunes extensions Delphi 2 **2Mdelphi_Intenta ser compatible amb Delphi **2Mtp_Intenta ser compatible amb TP/BP 7.0 **2Mgpc_Intenta ser compatible amb gpc **2Mmacpas_Intenta ser compatible amb dialectes Pascal del Macintosh **1n_No llegeix el fitxer de configuració predeterminat **1o_Canvia el nom de l'executable produït a **1O_optimitzacions: 3*2Og_genera codi més petit 3*2OG_genera codi més ràpid (predeterminat) **2Or_manté determinades variables en els registres 3*2Ou_habilita optimitzacions incertes (mireu docs) 3*2O1_optimitzacions de nivell 1 (ràpides) 3*2O2_optimitzacions de nivell 2 (-O1 + més lentes) 3*2O3_optimitzacions de nivell 3 (-O2 repetidament, max 5 vegades) 3*2Op_processador de destí: 3*3Op1_posa el processador de destí a 386/486 3*3Op2_posa el processador de destí a Pentium/PentiumMMX (r) 3*3Op3_posa el processador de destí a PPro/PII/c6x86/K6 (r) 6*2Og_genera codi més petit 6*2OG_genera codi més ràpid (predeterminat) 6*2Ox_optimitza al màxim (Encara no és segur !!!) 6*2O0_posa el processador de destí a MC68000 6*2O2_posa el processador de destí a MC68020+ (predeterminat) **1pg_genera codi de perfil per gprof (defineix FPC_PROFILE) **1R_Estil de lectura de l'assemblador: **2Rdefault_utilitza l'assemblador predeterminat 3*2Ratt_llegeix assemblador d'estil AT&T 3*2Rintel_llegeix assemblador d'estil Intel 4*2Ratt_llegeix assemblador d'estil AT&T 4*2Rintel_llegeix assemblador d'estil Intel 8*2Ratt_llegeix assemblador d'estil AT&T 8*2Rintel_llegeix assemblador d'estil Intel 6*2RMOT_llegeix assemblador d'estil Motorola **1S_Opcions de sintaxi: **2S2_Igual que -Mobjfpc **2Sc_Permet operadors tipus C (*=,+=,/= i -=) **2Sa_Inclou assertion code **2Sd_Igual que -Mdelphi **2Se_opcions d'error és una combinació del següent: **3*_: el compilador s'atura després de errors (predeterminat és 1) **3*_w: el compilador s'atura també després dels avisos **3*_n: el compilador s'atura també després de les notes **3*_h: el compilador s'atura també després dels suggeriments **2Sg_Permet LABEL i GOTO **2Sh_Utilitza ansistrings **2Si_Permet INLINE estil C++ **2SI_posa l'estil de l'interfície a **3SIcom_interfície compatible amb COM (predeterminat) **3SIcorba_interfície compatible amb CORBA **2Sm_Permet macros tipus C (globals) **2So_Igual que -Mtp **2Sp_Igual que -Mgpc **2Ss_El nom del constructor ha de ser init (destructor = done) **1s_No cridis l'assemblador ni l'enllaçador **2sh_Genera la seqüència per enllaçar a l'anfitrió **2st_Genera la seqüència per enllaçar al destí **2sr_Salta la fase de localització de registres (utilitzeu amb -alr) **1T_sistema operatiu de destí: 3*2Termx_OS/2 via EMX (incloent extensor EMX/RSX) 3*2Tfreebsd_FreeBSD 3*2go32v2_versió 2 de DJ Deloire DOS extender 3*2Tlinux_Linux 3*2Tnetbsd_NetBSD 3*2Tnetware_Novell Netware Module (clib) 3*2Tnetwlibc_Novell Netware Module (libc) 3*2Topenbsd_OpenBSD 3*2Tos2_OS/2 eComStation 3*2Twatcom_Watcom compatible DOS extender 3*2Twdosx_WDOSX DOS extender 3*2Twin32_Windows 32 Bit 4*2Tlinux_Linux 6*2Tamiga_Commodore Amiga 6*2Tatari_Atari ST/STe/TT 6*2Tlinux_Linux-68k 6*2Tmacos_Macintosh m68k (no compatible) 6*2Tpalmos_PalmOS A*2Tlinux_Linux P*2Tdarwin_Darwin i MacOS X en PowerPC P*2Tlinux_Linux en PowerPC P*2Tmacos_MacOS (clàssic) en PowerPC P*2Tmorphos_MorphOS S*2Tlinux_Linux **1u_Indefineix el símbol **1U_Opcions de l'unitat: **2Un_No comprovar el nom de l'unitat **2Ur_generate release unit files **2Us_Compila una unitat del sistema **1v_Detall. és una combinació de les següents lletres : **2*_e : mostra errors (predet.) 0 : no mostrar res (excepte errors) **2*_w : mostra avisos u : mostra info de les unitats **2*_n : mostra notes t : mostra els fitxers selec./utilitz. **2*_h : mostra suggeriments c : mostra els condicionals **2*_i : mostra informació general d : mostra l'informació del depurador **2*_l : mostra números de línia r : compatibilitat Rhide/GCC **2*_a : mostra-ho tot x : informació de l'executable (win32) **2*_v : escriu fpcdebug.txt amb p : escriu tree.log amb arbre analitzat **2*_ molta informació de la depuració 3*1W_Opcions per a plataformes tipus Win32 3*2WB_Imatge a valor hexadecimal 3*2WC_Especifica aplicació tipus consola 3*2WD_Utilitza DEFFILE per exportar les funcions de DLL o EXE 3*2WF_Especifica aplicació tipus pantalla sencera (només OS/2) 3*2WG_Especifica aplicació de tipus gràfic 3*2WN_No generar codi deslocalitzat (necessari per la depuració) 3*2WR_Genera codi reagrupat P*2WC_Especifica aplicació tipus consola (només MacOS) P*2WG_Especifica aplicació gràfica (només MacOS) P*2WT_Especifica aplicació tipus eina (eina MPW, només MacOS) **1X_Opcions de l'executable: **2Xc_passa --shared a l'enllaçador (només Unix) **2Xd_no utilitzar el camí normalitzat de biblioteques (necessària per compilar entre diferents SO) **2XD_intenta enllaçar les unitats dinàmicament (defineix FPC_LINK_DYNAMIC) **2XP_avant posar el prefix als noms de les utilitats binaries **2Xr_posa el camí de les biblioteques a (necessari per compilar entre diferents SO) **2Xs_elimina tots els símbols de l'executable **2XS_intenta enllaçar les unitats estàticament (predeterminat) (defineix FPC_LINK_STATIC) **2Xt_enllaça amb biblioteques estàtiques (es passa -static a l'enllaçador) **2XX_intenta enllaçar les unitats intel·ligentment (defineix FPC_LINK_SMART) **1*_ **1?_mostra aquesta ajuda **1h_mostra aquesta ajuda sense esperar ] # # The End...