diff options
Diffstat (limited to 'FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/Common/WinPCap/Packet32.h')
| -rw-r--r-- | FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/Common/WinPCap/Packet32.h | 398 |
1 files changed, 0 insertions, 398 deletions
diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/Common/WinPCap/Packet32.h b/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/Common/WinPCap/Packet32.h deleted file mode 100644 index e8a444dee..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/Common/WinPCap/Packet32.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy) - * Copyright (c) 2005 - 2007 CACE Technologies, Davis (California) - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Politecnico di Torino, CACE Technologies - * nor the names of its contributors may be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -/** @ingroup packetapi - * @{ - */ - -/** @defgroup packet32h Packet.dll definitions and data structures - * Packet32.h contains the data structures and the definitions used by packet.dll. - * The file is used both by the Win9x and the WinNTx versions of packet.dll, and can be included - * by the applications that use the functions of this library - * @{ - */ - -#ifndef __PACKET32 - #define __PACKET32 - - #include <winsock2.h> - - #ifdef HAVE_AIRPCAP_API - #include <airpcap.h> - #else - #if !defined( AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ ) - #define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ - typedef struct _AirpcapHandle * PAirpcapHandle; - #endif /* AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ */ - #endif /* HAVE_AIRPCAP_API */ - - #ifdef HAVE_DAG_API - #include <dagc.h> - #endif /* HAVE_DAG_API */ - -/* Working modes */ - #define PACKET_MODE_CAPT 0x0 /*/< Capture mode */ - #define PACKET_MODE_STAT 0x1 /*/< Statistical mode */ - #define PACKET_MODE_MON 0x2 /*/< Monitoring mode */ - #define PACKET_MODE_DUMP 0x10 /*/< Dump mode */ - #define PACKET_MODE_STAT_DUMP MODE_DUMP | MODE_STAT /*/< Statistical dump Mode */ - - -/*/ Alignment macro. Defines the alignment size. */ - #define Packet_ALIGNMENT sizeof( int ) -/*/ Alignment macro. Rounds up to the next even multiple of Packet_ALIGNMENT. */ - #define Packet_WORDALIGN( x ) ( ( ( x ) + ( Packet_ALIGNMENT - 1 ) ) & ~( Packet_ALIGNMENT - 1 ) ) - - #define NdisMediumNull -1 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - #define NdisMediumCHDLC -2 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - #define NdisMediumPPPSerial -3 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - #define NdisMediumBare80211 -4 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - #define NdisMediumRadio80211 -5 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - #define NdisMediumPpi -6 /*/< Custom linktype: NDIS doesn't provide an equivalent */ - -/* Loopback behaviour definitions */ - #define NPF_DISABLE_LOOPBACK 1 /*/< Drop the packets sent by the NPF driver */ - #define NPF_ENABLE_LOOPBACK 2 /*/< Capture the packets sent by the NPF driver */ - -/*! - * \brief Network type structure. - * - * This structure is used by the PacketGetNetType() function to return information on the current adapter's type and speed. - */ - typedef struct NetType - { - UINT LinkType; /*/< The MAC of the current network adapter (see function PacketGetNetType() for more information) */ - ULONGLONG LinkSpeed; /*/< The speed of the network in bits per second */ - } NetType; - - -/*some definitions stolen from libpcap */ - - #ifndef BPF_MAJOR_VERSION - -/*! - * \brief A BPF pseudo-assembly program. - * - * The program will be injected in the kernel by the PacketSetBPF() function and applied to every incoming packet. - */ - struct bpf_program - { - UINT bf_len; /*/< Indicates the number of instructions of the program, i.e. the number of struct bpf_insn that will follow. */ - struct bpf_insn * bf_insns; /*/< A pointer to the first instruction of the program. */ - }; - -/*! - * \brief A single BPF pseudo-instruction. - * - * bpf_insn contains a single instruction for the BPF register-machine. It is used to send a filter program to the driver. - */ - struct bpf_insn - { - USHORT code; /*/< Instruction type and addressing mode. */ - UCHAR jt; /*/< Jump if true */ - UCHAR jf; /*/< Jump if false */ - int k; /*/< Generic field used for various purposes. */ - }; - -/*! - * \brief Structure that contains a couple of statistics values on the current capture. - * - * It is used by packet.dll to return statistics about a capture session. - */ - struct bpf_stat - { - UINT bs_recv; /*/< Number of packets that the driver received from the network adapter */ - /*/< from the beginning of the current capture. This value includes the packets */ - /*/< lost by the driver. */ - UINT bs_drop; /*/< number of packets that the driver lost from the beginning of a capture. */ - /*/< Basically, a packet is lost when the the buffer of the driver is full. */ - /*/< In this situation the packet cannot be stored and the driver rejects it. */ - UINT ps_ifdrop; /*/< drops by interface. XXX not yet supported */ - UINT bs_capt; /*/< number of packets that pass the filter, find place in the kernel buffer and */ - /*/< thus reach the application. */ - }; - -/*! - * \brief Packet header. - * - * This structure defines the header associated with every packet delivered to the application. - */ - struct bpf_hdr - { - struct timeval bh_tstamp; /*/< The timestamp associated with the captured packet. */ - /*/< It is stored in a TimeVal structure. */ - UINT bh_caplen; /*/< Length of captured portion. The captured portion <b>can be different</b> */ - /*/< from the original packet, because it is possible (with a proper filter) */ - /*/< to instruct the driver to capture only a portion of the packets. */ - UINT bh_datalen; /*/< Original length of packet */ - USHORT bh_hdrlen; /*/< Length of bpf header (this struct plus alignment padding). In some cases, */ - /*/< a padding could be added between the end of this structure and the packet */ - /*/< data for performance reasons. This filed can be used to retrieve the actual data */ - /*/< of the packet. */ - }; - -/*! - * \brief Dump packet header. - * - * This structure defines the header associated with the packets in a buffer to be used with PacketSendPackets(). - * It is simpler than the bpf_hdr, because it corresponds to the header associated by WinPcap and libpcap to a - * packet in a dump file. This makes straightforward sending WinPcap dump files to the network. - */ - struct dump_bpf_hdr - { - struct timeval ts; /*/< Time stamp of the packet */ - UINT caplen; /*/< Length of captured portion. The captured portion can smaller than the */ - /*/< the original packet, because it is possible (with a proper filter) to */ - /*/< instruct the driver to capture only a portion of the packets. */ - UINT len; /*/< Length of the original packet (off wire). */ - }; - - - #endif /* ifndef BPF_MAJOR_VERSION */ - - struct bpf_stat; - - #define DOSNAMEPREFIX TEXT( "Packet_" ) /*/< Prefix added to the adapters device names to create the WinPcap devices */ - #define MAX_LINK_NAME_LENGTH 64 /*< Maximum length of the devices symbolic links */ - #define NMAX_PACKET 65535 - -/*! - * \brief Addresses of a network adapter. - * - * This structure is used by the PacketGetNetInfoEx() function to return the IP addresses associated with - * an adapter. - */ - typedef struct npf_if_addr - { - struct sockaddr_storage IPAddress; /*/< IP address. */ - struct sockaddr_storage SubnetMask; /*/< Netmask for that address. */ - struct sockaddr_storage Broadcast; /*/< Broadcast address. */ - } npf_if_addr; - - - #define ADAPTER_NAME_LENGTH 256 + 12 /*/< Maximum length for the name of an adapter. The value is the same used by the IP Helper API. */ - #define ADAPTER_DESC_LENGTH 128 /*/< Maximum length for the description of an adapter. The value is the same used by the IP Helper API. */ - #define MAX_MAC_ADDR_LENGTH 8 /*/< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. */ - #define MAX_NETWORK_ADDRESSES 16 /*/< Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API. */ - - - typedef struct WAN_ADAPTER_INT WAN_ADAPTER; /*/< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API */ - typedef WAN_ADAPTER * PWAN_ADAPTER; /*/< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API */ - - #define INFO_FLAG_NDIS_ADAPTER 0 /*/< Flag for ADAPTER_INFO: this is a traditional ndis adapter */ - #define INFO_FLAG_NDISWAN_ADAPTER 1 /*/< Flag for ADAPTER_INFO: this is a NdisWan adapter, and it's managed by WANPACKET */ - #define INFO_FLAG_DAG_CARD 2 /*/< Flag for ADAPTER_INFO: this is a DAG card */ - #define INFO_FLAG_DAG_FILE 6 /*/< Flag for ADAPTER_INFO: this is a DAG file */ - #define INFO_FLAG_DONT_EXPORT 8 /*/< Flag for ADAPTER_INFO: when this flag is set, the adapter will not be listed or openend by winpcap. This allows to prevent exporting broken network adapters, like for example FireWire ones. */ - #define INFO_FLAG_AIRPCAP_CARD 16 /*/< Flag for ADAPTER_INFO: this is an airpcap card */ - #define INFO_FLAG_NPFIM_DEVICE 32 - -/*! - * \brief Describes an opened network adapter. - * - * This structure is the most important for the functioning of packet.dll, but the great part of its fields - * should be ignored by the user, since the library offers functions that avoid to cope with low-level parameters - */ - typedef struct _ADAPTER - { - HANDLE hFile; /*/< \internal Handle to an open instance of the NPF driver. */ - CHAR SymbolicLink[ MAX_LINK_NAME_LENGTH ]; /*/< \internal A string containing the name of the network adapter currently opened. */ - int NumWrites; /*/< \internal Number of times a packets written on this adapter will be repeated */ - /*/< on the wire. */ - HANDLE ReadEvent; /*/< A notification event associated with the read calls on the adapter. */ - /*/< It can be passed to standard Win32 functions (like WaitForSingleObject */ - /*/< or WaitForMultipleObjects) to wait until the driver's buffer contains some */ - /*/< data. It is particularly useful in GUI applications that need to wait */ - /*/< concurrently on several events. In Windows NT/2000 the PacketSetMinToCopy() */ - /*/< function can be used to define the minimum amount of data in the kernel buffer */ - /*/< that will cause the event to be signalled. */ - - UINT ReadTimeOut; /*/< \internal The amount of time after which a read on the driver will be released and */ - /*/< ReadEvent will be signaled, also if no packets were captured */ - CHAR Name[ ADAPTER_NAME_LENGTH ]; - PWAN_ADAPTER pWanAdapter; - UINT Flags; /*/< Adapter's flags. Tell if this adapter must be treated in a different way, using the Netmon API or the dagc API. */ - - #ifdef HAVE_AIRPCAP_API - PAirpcapHandle AirpcapAd; - #endif // HAVE_AIRPCAP_API - - #ifdef HAVE_NPFIM_API - void * NpfImHandle; - #endif // HAVE_NPFIM_API - - #ifdef HAVE_DAG_API - dagc_t * pDagCard; /*/< Pointer to the dagc API adapter descriptor for this adapter */ - PCHAR DagBuffer; /*/< Pointer to the buffer with the packets that is received from the DAG card */ - struct timeval DagReadTimeout; /*/< Read timeout. The dagc API requires a timeval structure */ - unsigned DagFcsLen; /*/< Length of the frame check sequence attached to any packet by the card. Obtained from the registry */ - DWORD DagFastProcess; /*/< True if the user requests fast capture processing on this card. Higher level applications can use this value to provide a faster but possibly unprecise capture (for example, libpcap doesn't convert the timestamps). */ - #endif // HAVE_DAG_API - } ADAPTER, * LPADAPTER; - -/*! - * \brief Structure that contains a group of packets coming from the driver. - * - * This structure defines the header associated with every packet delivered to the application. - */ - typedef struct _PACKET - { - HANDLE hEvent; /*/< \deprecated Still present for compatibility with old applications. */ - OVERLAPPED OverLapped; /*/< \deprecated Still present for compatibility with old applications. */ - PVOID Buffer; /*/< Buffer with containing the packets. See the PacketReceivePacket() for */ - /*/< details about the organization of the data in this buffer */ - UINT Length; /*/< Length of the buffer */ - DWORD ulBytesReceived; /*/< Number of valid bytes present in the buffer, i.e. amount of data */ - /*/< received by the last call to PacketReceivePacket() */ - BOOLEAN bIoComplete; /*/< \deprecated Still present for compatibility with old applications. */ - } PACKET, * LPPACKET; - -/*! - * \brief Structure containing an OID request. - * - * It is used by the PacketRequest() function to send an OID to the interface card driver. - * It can be used, for example, to retrieve the status of the error counters on the adapter, its MAC address, - * the list of the multicast groups defined on it, and so on. - */ - struct _PACKET_OID_DATA - { - ULONG Oid; /*/< OID code. See the Microsoft DDK documentation or the file ntddndis.h */ - /*/< for a complete list of valid codes. */ - ULONG Length; /*/< Length of the data field */ - UCHAR Data[ 1 ]; /*/< variable-lenght field that contains the information passed to or received */ - /*/< from the adapter. */ - }; - typedef struct _PACKET_OID_DATA PACKET_OID_DATA, * PPACKET_OID_DATA; - - #ifdef __cplusplus - extern "C" { - #endif - -/** - * @} - */ - -/* - * BOOLEAN QueryWinPcapRegistryStringA(CHAR *SubKeyName, - * CHAR *Value, - * UINT *pValueLen, - * CHAR *DefaultVal); - * - * BOOLEAN QueryWinPcapRegistryStringW(WCHAR *SubKeyName, - * WCHAR *Value, - * UINT *pValueLen, - * WCHAR *DefaultVal); - */ - -/*--------------------------------------------------------------------------- */ -/* EXPORTED FUNCTIONS */ -/*--------------------------------------------------------------------------- */ - - PCHAR PacketGetVersion(); - PCHAR PacketGetDriverVersion(); - BOOLEAN PacketSetMinToCopy( LPADAPTER AdapterObject, - int nbytes ); - BOOLEAN PacketSetNumWrites( LPADAPTER AdapterObject, - int nwrites ); - BOOLEAN PacketSetMode( LPADAPTER AdapterObject, - int mode ); - BOOLEAN PacketSetReadTimeout( LPADAPTER AdapterObject, - int timeout ); - BOOLEAN PacketSetBpf( LPADAPTER AdapterObject, - struct bpf_program * fp ); - BOOLEAN PacketSetLoopbackBehavior( LPADAPTER AdapterObject, - UINT LoopbackBehavior ); - INT PacketSetSnapLen( LPADAPTER AdapterObject, - int snaplen ); - BOOLEAN PacketGetStats( LPADAPTER AdapterObject, - struct bpf_stat * s ); - BOOLEAN PacketGetStatsEx( LPADAPTER AdapterObject, - struct bpf_stat * s ); - BOOLEAN PacketSetBuff( LPADAPTER AdapterObject, - int dim ); - BOOLEAN PacketGetNetType( LPADAPTER AdapterObject, - NetType * type ); - LPADAPTER PacketOpenAdapter( PCHAR AdapterName ); - BOOLEAN PacketSendPacket( LPADAPTER AdapterObject, - LPPACKET pPacket, - BOOLEAN Sync ); - INT PacketSendPackets( LPADAPTER AdapterObject, - PVOID PacketBuff, - ULONG Size, - BOOLEAN Sync ); - LPPACKET PacketAllocatePacket( void ); - VOID PacketInitPacket( LPPACKET lpPacket, - PVOID Buffer, - UINT Length ); - VOID PacketFreePacket( LPPACKET lpPacket ); - BOOLEAN PacketReceivePacket( LPADAPTER AdapterObject, - LPPACKET lpPacket, - BOOLEAN Sync ); - BOOLEAN PacketSetHwFilter( LPADAPTER AdapterObject, - ULONG Filter ); - BOOLEAN PacketGetAdapterNames( PTSTR pStr, - PULONG BufferSize ); - BOOLEAN PacketGetNetInfoEx( PCHAR AdapterName, - npf_if_addr * buffer, - PLONG NEntries ); - BOOLEAN PacketRequest( LPADAPTER AdapterObject, - BOOLEAN Set, - PPACKET_OID_DATA OidData ); - HANDLE PacketGetReadEvent( LPADAPTER AdapterObject ); - BOOLEAN PacketSetDumpName( LPADAPTER AdapterObject, - void * name, - int len ); - BOOLEAN PacketSetDumpLimits( LPADAPTER AdapterObject, - UINT maxfilesize, - UINT maxnpacks ); - BOOLEAN PacketIsDumpEnded( LPADAPTER AdapterObject, - BOOLEAN sync ); - BOOL PacketStopDriver(); - VOID PacketCloseAdapter( LPADAPTER lpAdapter ); - BOOLEAN PacketStartOem( PCHAR errorString, - UINT errorStringLength ); - BOOLEAN PacketStartOemEx( PCHAR errorString, - UINT errorStringLength, - ULONG flags ); - PAirpcapHandle PacketGetAirPcapHandle( LPADAPTER AdapterObject ); - -/* */ -/* Used by PacketStartOemEx */ -/* */ - #define PACKET_START_OEM_NO_NETMON 0x00000001 - - #ifdef __cplusplus - } - #endif - -#endif //__PACKET32 |