diff options
Diffstat (limited to 'FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h')
-rw-r--r-- | FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h | 418 |
1 files changed, 209 insertions, 209 deletions
diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h b/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h index 70bea4afd..6813adb5a 100644 --- a/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h +++ b/FreeRTOS-Plus/Demo/FreeRTOS_Cellular_Interface_Windows_Simulator/MQTT_Mutual_Auth_Demo_with_HL7802/FreeRTOSConfig.h @@ -1,209 +1,209 @@ -/*
- * FreeRTOS V202107.00
- * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * http://www.FreeRTOS.org
- * http://aws.amazon.com/freertos
- */
-
-#ifndef FREERTOS_CONFIG_H
-#define FREERTOS_CONFIG_H
-
-/*-----------------------------------------------------------
-* Application specific definitions.
-*
-* These definitions should be adjusted for your particular hardware and
-* application requirements.
-*
-* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
-* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
-* http://www.freertos.org/a00110.html
-*
-* The bottom of this file contains some constants specific to running the UDP
-* stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than
-* the demo) are contained in FreeRTOSIPConfig.h.
-*----------------------------------------------------------*/
-#define configUSE_PREEMPTION 1
-#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
-#define configMAX_PRIORITIES ( 7 )
-#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */
-#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */
-#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) )
-#define configMAX_TASK_NAME_LEN ( 15 )
-#define configUSE_TRACE_FACILITY 0
-#define configUSE_16_BIT_TICKS 0
-#define configIDLE_SHOULD_YIELD 1
-#define configUSE_CO_ROUTINES 0
-#define configUSE_MUTEXES 1
-#define configUSE_RECURSIVE_MUTEXES 1
-#define configQUEUE_REGISTRY_SIZE 0
-#define configUSE_APPLICATION_TASK_TAG 0
-#define configUSE_COUNTING_SEMAPHORES 1
-#define configUSE_ALTERNATIVE_API 0
-#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0
-#define configENABLE_BACKWARD_COMPATIBILITY 1
-#define configSUPPORT_STATIC_ALLOCATION 1
-
-/* Hook function related definitions. */
-#define configUSE_TICK_HOOK 0
-#define configUSE_IDLE_HOOK 0
-#define configUSE_MALLOC_FAILED_HOOK 0
-#define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */
-
-/* Software timer related definitions. */
-#define configUSE_TIMERS 1
-#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )
-#define configTIMER_QUEUE_LENGTH 5
-#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 )
-
-/* Event group related definitions. */
-#define configUSE_EVENT_GROUPS 1
-
-/* Run time stats gathering configuration options. */
-#define configGENERATE_RUN_TIME_STATS 0
-
-/* Co-routine definitions. */
-#define configUSE_CO_ROUTINES 0
-#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
-
-/* Set the following definitions to 1 to include the API function, or zero
- * to exclude the API function. */
-#define INCLUDE_vTaskPrioritySet 1
-#define INCLUDE_uxTaskPriorityGet 1
-#define INCLUDE_vTaskDelete 1
-#define INCLUDE_vTaskCleanUpResources 0
-#define INCLUDE_vTaskSuspend 1
-#define INCLUDE_vTaskDelayUntil 1
-#define INCLUDE_vTaskDelay 1
-#define INCLUDE_uxTaskGetStackHighWaterMark 1
-#define INCLUDE_xTaskGetSchedulerState 1
-#define INCLUDE_xTimerGetTimerTaskHandle 0
-#define INCLUDE_xTaskGetIdleTaskHandle 0
-#define INCLUDE_xQueueGetMutexHolder 1
-#define INCLUDE_eTaskGetState 1
-#define INCLUDE_xEventGroupSetBitsFromISR 1
-#define INCLUDE_xTimerPendFunctionCall 1
-#define INCLUDE_pcTaskGetTaskName 1
-
-/* This demo makes use of one or more example stats formatting functions. These
- * format the raw data provided by the uxTaskGetSystemState() function in to human
- * readable ASCII form. See the notes in the implementation of vTaskList() within
- * FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS
- * is set to 2 so the formatting functions are included without the stdio.h being
- * included in tasks.c. That is because this project defines its own sprintf()
- * functions. */
-#define configUSE_STATS_FORMATTING_FUNCTIONS 1
-
-/* Assert call defined for debug builds. */
-#ifdef _DEBUG
- extern void vAssertCalled( const char * pcFile,
- uint32_t ulLine );
- #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ )
-#endif /* _DEBUG */
-
-
-
-/* Application specific definitions follow. **********************************/
-
-/* Only used when running in the FreeRTOS Windows simulator. Defines the
- * priority of the task used to simulate Ethernet interrupts. */
-#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 )
-
-/* This demo creates a virtual network connection by accessing the raw Ethernet
- * or WiFi data to and from a real network connection. Many computers have more
- * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell
- * the demo which real port should be used to create the virtual port. The ports
- * available are displayed on the console when the application is executed. For
- * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4
- * results in the wired network being used, while setting
- * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being
- * used. */
-#define configNETWORK_INTERFACE_TO_USE ( 1L )
-
-/* The address to which logging is sent should UDP logging be enabled. */
-#define configUDP_LOGGING_ADDR0 192
-#define configUDP_LOGGING_ADDR1 168
-#define configUDP_LOGGING_ADDR2 0
-#define configUDP_LOGGING_ADDR3 11
-
-/* Default MAC address configuration. The demo creates a virtual network
- * connection that uses this MAC address by accessing the raw Ethernet/WiFi data
- * to and from a real network connection on the host PC. See the
- * configNETWORK_INTERFACE_TO_USE definition above for information on how to
- * configure the real network connection to use. */
-#define configMAC_ADDR0 0x00
-#define configMAC_ADDR1 0x11
-#define configMAC_ADDR2 0x11
-#define configMAC_ADDR3 0x11
-#define configMAC_ADDR4 0x11
-#define configMAC_ADDR5 0x6a
-
-/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or
- * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
-#define configIP_ADDR0 10
-#define configIP_ADDR1 10
-#define configIP_ADDR2 10
-#define configIP_ADDR3 200
-
-/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to
- * 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
-#define configGATEWAY_ADDR0 10
-#define configGATEWAY_ADDR1 10
-#define configGATEWAY_ADDR2 10
-#define configGATEWAY_ADDR3 1
-
-/* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and
- * 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set
- * to 1 but a DNS server cannot be contacted.*/
-#define configDNS_SERVER_ADDR0 208
-#define configDNS_SERVER_ADDR1 67
-#define configDNS_SERVER_ADDR2 222
-#define configDNS_SERVER_ADDR3 222
-
-/* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or
- * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */
-#define configNET_MASK0 255
-#define configNET_MASK1 0
-#define configNET_MASK2 0
-#define configNET_MASK3 0
-
-/* The UDP port to which print messages are sent. */
-#define configPRINT_PORT ( 15000 )
-
-
-#if ( defined( _MSC_VER ) && ( _MSC_VER <= 1600 ) && !defined( snprintf ) )
- /* Map to Windows names. */
- #define snprintf _snprintf
- #define vsnprintf _vsnprintf
-#endif
-
-/* Visual studio does not have an implementation of strcasecmp(). */
-#define strcasecmp _stricmp
-#define strncasecmp _strnicmp
-#define strcmpi _strcmpi
-
-/* Prototype for the function used to print out. In this case it prints to the
- * console before the network is connected then a UDP port after the network has
- * connected. */
-extern void vLoggingPrintf( const char * pcFormatString,
- ... );
-#define configPRINTF( X ) vLoggingPrintf X
-
-#endif /* FREERTOS_CONFIG_H */
+/* + * FreeRTOS V202107.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + */ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- +* Application specific definitions. +* +* These definitions should be adjusted for your particular hardware and +* application requirements. +* +* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE +* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. +* http://www.freertos.org/a00110.html +* +* The bottom of this file contains some constants specific to running the UDP +* stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than +* the demo) are contained in FreeRTOSIPConfig.h. +*----------------------------------------------------------*/ +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#define configMAX_PRIORITIES ( 7 ) +#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */ +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */ +#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) ) +#define configMAX_TASK_NAME_LEN ( 15 ) +#define configUSE_TRACE_FACILITY 0 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_CO_ROUTINES 0 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 0 +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_ALTERNATIVE_API 0 +#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSUPPORT_STATIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_TICK_HOOK 0 +#define configUSE_IDLE_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */ + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_QUEUE_LENGTH 5 +#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) + +/* Event group related definitions. */ +#define configUSE_EVENT_GROUPS 1 + +/* Run time stats gathering configuration options. */ +#define configGENERATE_RUN_TIME_STATS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Set the following definitions to 1 to include the API function, or zero + * to exclude the API function. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 1 +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTimerGetTimerTaskHandle 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xQueueGetMutexHolder 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xEventGroupSetBitsFromISR 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_pcTaskGetTaskName 1 + +/* This demo makes use of one or more example stats formatting functions. These + * format the raw data provided by the uxTaskGetSystemState() function in to human + * readable ASCII form. See the notes in the implementation of vTaskList() within + * FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS + * is set to 2 so the formatting functions are included without the stdio.h being + * included in tasks.c. That is because this project defines its own sprintf() + * functions. */ +#define configUSE_STATS_FORMATTING_FUNCTIONS 1 + +/* Assert call defined for debug builds. */ +#ifdef _DEBUG + extern void vAssertCalled( const char * pcFile, + uint32_t ulLine ); + #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) +#endif /* _DEBUG */ + + + +/* Application specific definitions follow. **********************************/ + +/* Only used when running in the FreeRTOS Windows simulator. Defines the + * priority of the task used to simulate Ethernet interrupts. */ +#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 ) + +/* This demo creates a virtual network connection by accessing the raw Ethernet + * or WiFi data to and from a real network connection. Many computers have more + * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell + * the demo which real port should be used to create the virtual port. The ports + * available are displayed on the console when the application is executed. For + * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 + * results in the wired network being used, while setting + * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being + * used. */ +#define configNETWORK_INTERFACE_TO_USE ( 1L ) + +/* The address to which logging is sent should UDP logging be enabled. */ +#define configUDP_LOGGING_ADDR0 192 +#define configUDP_LOGGING_ADDR1 168 +#define configUDP_LOGGING_ADDR2 0 +#define configUDP_LOGGING_ADDR3 11 + +/* Default MAC address configuration. The demo creates a virtual network + * connection that uses this MAC address by accessing the raw Ethernet/WiFi data + * to and from a real network connection on the host PC. See the + * configNETWORK_INTERFACE_TO_USE definition above for information on how to + * configure the real network connection to use. */ +#define configMAC_ADDR0 0x00 +#define configMAC_ADDR1 0x11 +#define configMAC_ADDR2 0x11 +#define configMAC_ADDR3 0x11 +#define configMAC_ADDR4 0x11 +#define configMAC_ADDR5 0x6a + +/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or + * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ +#define configIP_ADDR0 10 +#define configIP_ADDR1 10 +#define configIP_ADDR2 10 +#define configIP_ADDR3 200 + +/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to + * 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ +#define configGATEWAY_ADDR0 10 +#define configGATEWAY_ADDR1 10 +#define configGATEWAY_ADDR2 10 +#define configGATEWAY_ADDR3 1 + +/* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and + * 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set + * to 1 but a DNS server cannot be contacted.*/ +#define configDNS_SERVER_ADDR0 208 +#define configDNS_SERVER_ADDR1 67 +#define configDNS_SERVER_ADDR2 222 +#define configDNS_SERVER_ADDR3 222 + +/* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or + * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ +#define configNET_MASK0 255 +#define configNET_MASK1 0 +#define configNET_MASK2 0 +#define configNET_MASK3 0 + +/* The UDP port to which print messages are sent. */ +#define configPRINT_PORT ( 15000 ) + + +#if ( defined( _MSC_VER ) && ( _MSC_VER <= 1600 ) && !defined( snprintf ) ) + /* Map to Windows names. */ + #define snprintf _snprintf + #define vsnprintf _vsnprintf +#endif + +/* Visual studio does not have an implementation of strcasecmp(). */ +#define strcasecmp _stricmp +#define strncasecmp _strnicmp +#define strcmpi _strcmpi + +/* Prototype for the function used to print out. In this case it prints to the + * console before the network is connected then a UDP port after the network has + * connected. */ +extern void vLoggingPrintf( const char * pcFormatString, + ... ); +#define configPRINTF( X ) vLoggingPrintf X + +#endif /* FREERTOS_CONFIG_H */ |