diff options
Diffstat (limited to 'FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo_bsp/ps7_cortexa9_0/include/xstatus.h')
| -rw-r--r-- | FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo_bsp/ps7_cortexa9_0/include/xstatus.h | 439 |
1 files changed, 439 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo_bsp/ps7_cortexa9_0/include/xstatus.h b/FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo_bsp/ps7_cortexa9_0/include/xstatus.h new file mode 100644 index 000000000..76d2a94c7 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_A9_Zynq_ZC702/RTOSDemo_bsp/ps7_cortexa9_0/include/xstatus.h @@ -0,0 +1,439 @@ +/****************************************************************************** +* +* (c) Copyright 2002-2013 Xilinx, Inc. All rights reserved. +* +* This file contains confidential and proprietary information of Xilinx, Inc. +* and is protected under U.S. and international copyright and other +* intellectual property laws. +* +* DISCLAIMER +* This disclaimer is not a license and does not grant any rights to the +* materials distributed herewith. Except as otherwise provided in a valid +* license issued to you by Xilinx, and to the maximum extent permitted by +* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL +* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS, +* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF +* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; +* and (2) Xilinx shall not be liable (whether in contract or tort, including +* negligence, or under any other theory of liability) for any loss or damage +* of any kind or nature related to, arising under or in connection with these +* materials, including for any direct, or any indirect, special, incidental, +* or consequential loss or damage (including loss of data, profits, goodwill, +* or any type of loss or damage suffered as a result of any action brought by +* a third party) even if such damage or loss was reasonably foreseeable or +* Xilinx had been advised of the possibility of the same. +* +* CRITICAL APPLICATIONS +* Xilinx products are not designed or intended to be fail-safe, or for use in +* any application requiring fail-safe performance, such as life-support or +* safety devices or systems, Class III medical devices, nuclear facilities, +* applications related to the deployment of airbags, or any other applications +* that could lead to death, personal injury, or severe property or +* environmental damage (individually and collectively, "Critical +* Applications"). Customer assumes the sole risk and liability of any use of +* Xilinx products in Critical Applications, subject only to applicable laws +* and regulations governing limitations on product liability. +* +* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE +* AT ALL TIMES. +* +******************************************************************************/ +/*****************************************************************************/ +/** +* +* @file xstatus.h +* +* This file contains Xilinx software status codes. Status codes have their +* own data type called int. These codes are used throughout the Xilinx +* device drivers. +* +******************************************************************************/ + +#ifndef XSTATUS_H /* prevent circular inclusions */ +#define XSTATUS_H /* by using protection macros */ + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************** Include Files *********************************/ + +#include "xil_types.h" +#include "xil_assert.h" + +/************************** Constant Definitions *****************************/ + +/*********************** Common statuses 0 - 500 *****************************/ + +#define XST_SUCCESS 0L +#define XST_FAILURE 1L +#define XST_DEVICE_NOT_FOUND 2L +#define XST_DEVICE_BLOCK_NOT_FOUND 3L +#define XST_INVALID_VERSION 4L +#define XST_DEVICE_IS_STARTED 5L +#define XST_DEVICE_IS_STOPPED 6L +#define XST_FIFO_ERROR 7L /* an error occurred during an + operation with a FIFO such as + an underrun or overrun, this + error requires the device to + be reset */ +#define XST_RESET_ERROR 8L /* an error occurred which requires + the device to be reset */ +#define XST_DMA_ERROR 9L /* a DMA error occurred, this error + typically requires the device + using the DMA to be reset */ +#define XST_NOT_POLLED 10L /* the device is not configured for + polled mode operation */ +#define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put + the specified data into */ +#define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough + to hold the expected data */ +#define XST_NO_DATA 13L /* there was no data available */ +#define XST_REGISTER_ERROR 14L /* a register did not contain the + expected value */ +#define XST_INVALID_PARAM 15L /* an invalid parameter was passed + into the function */ +#define XST_NOT_SGDMA 16L /* the device is not configured for + scatter-gather DMA operation */ +#define XST_LOOPBACK_ERROR 17L /* a loopback test failed */ +#define XST_NO_CALLBACK 18L /* a callback has not yet been + registered */ +#define XST_NO_FEATURE 19L /* device is not configured with + the requested feature */ +#define XST_NOT_INTERRUPT 20L /* device is not configured for + interrupt mode operation */ +#define XST_DEVICE_BUSY 21L /* device is busy */ +#define XST_ERROR_COUNT_MAX 22L /* the error counters of a device + have maxed out */ +#define XST_IS_STARTED 23L /* used when part of device is + already started i.e. + sub channel */ +#define XST_IS_STOPPED 24L /* used when part of device is + already stopped i.e. + sub channel */ +#define XST_DATA_LOST 26L /* driver defined error */ +#define XST_RECV_ERROR 27L /* generic receive error */ +#define XST_SEND_ERROR 28L /* generic transmit error */ +#define XST_NOT_ENABLED 29L /* a requested service is not + available because it has not + been enabled */ + +/***************** Utility Component statuses 401 - 500 *********************/ + +#define XST_MEMTEST_FAILED 401L /* memory test failed */ + + +/***************** Common Components statuses 501 - 1000 *********************/ + +/********************* Packet Fifo statuses 501 - 510 ************************/ + +#define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */ +#define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */ +#define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value + was invalid after reset */ +#define XST_PFIFO_ERROR 504L /* generic packet FIFO error */ +#define XST_PFIFO_DEADLOCK 505L /* packet FIFO is reporting + * empty and full simultaneously + */ + +/************************** DMA statuses 511 - 530 ***************************/ + +#define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer + failed */ +#define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value + was invalid after reset */ +#define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains + no buffer descriptors ready + to be processed */ +#define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */ +#define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */ +#define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of + the scatter gather list are + being used */ +#define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer + descriptor which is to be + copied over in the scatter + list is locked */ +#define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been + put into the scatter gather + list to be commited */ +#define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold + specified was larger than the + total # of buffer descriptors + in the scatter gather list */ +#define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has + already been created */ +#define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has + been created */ +#define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was + being started was not committed + to the list */ +#define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start + has already been used by the + hardware so it can't be reused + */ +#define XST_DMA_SG_LIST_ERROR 526L /* general purpose list access + error */ +#define XST_DMA_BD_ERROR 527L /* general buffer descriptor + error */ + +/************************** IPIF statuses 531 - 550 ***************************/ + +#define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width + was passed into the function */ +#define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at + reset was not valid */ +#define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt + status register did not read + back correctly */ +#define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status + register did not reset when + acked */ +#define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable + register was not updated when + other registers changed */ +#define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt + status register did not read + back correctly */ +#define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register + did not reset when acked */ +#define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was + not updated correctly when other + registers changed */ +#define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending + register did not indicate the + expected value */ +#define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register + did not indicate the expected + value */ +#define XST_IPIF_ERROR 541L /* generic ipif error */ + +/****************** Device specific statuses 1001 - 4095 *********************/ + +/********************* Ethernet statuses 1001 - 1050 *************************/ + +#define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough + * to hold the minimum number of + * buffers or descriptors */ +#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */ +#define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */ +#define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */ +#define XST_EMAC_OUT_OF_BUFFERS 1005L /* Driver is out of buffers */ +#define XST_EMAC_PARSE_ERROR 1006L /* Invalid driver init string */ +#define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late + * collision on polled send */ + +/*********************** UART statuses 1051 - 1075 ***************************/ +#define XST_UART + +#define XST_UART_INIT_ERROR 1051L +#define XST_UART_START_ERROR 1052L +#define XST_UART_CONFIG_ERROR 1053L +#define XST_UART_TEST_FAIL 1054L +#define XST_UART_BAUD_ERROR 1055L +#define XST_UART_BAUD_RANGE 1056L + + +/************************ IIC statuses 1076 - 1100 ***************************/ + +#define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */ +#define XST_IIC_BUS_BUSY 1077 /* bus found busy */ +#define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */ + /* general call address */ +#define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */ + /* value after reset not valid */ +#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */ + /* value after reset not valid */ +#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */ + /* value after reset not valid */ +#define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */ + /* value after reset not valid */ +#define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */ + /* didn't return value written */ +#define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */ + /* didn't return value written */ +#define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */ + /* didn't return value written */ +#define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */ + /* didn't return value written */ +#define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */ + /* didn't return written value */ +#define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */ + +/*********************** ATMC statuses 1101 - 1125 ***************************/ + +#define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM + controller hit the max value + which requires the statistics + to be cleared */ + +/*********************** Flash statuses 1126 - 1150 **************************/ + +#define XST_FLASH_BUSY 1126L /* Flash is erasing or programming + */ +#define XST_FLASH_READY 1127L /* Flash is ready for commands */ +#define XST_FLASH_ERROR 1128L /* Flash had detected an internal + error. Use XFlash_DeviceControl + to retrieve device specific codes + */ +#define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state + */ +#define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state + */ +#define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by + driver */ +#define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */ +#define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */ +#define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation + aborted due to a timeout */ +#define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its + addressible range */ +#define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */ +#define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from + write/erase function with + XFL_NON_BLOCKING_WRITE/ERASE + option cleared */ +#define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */ + +/*********************** SPI statuses 1151 - 1175 ****************************/ + +#define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */ +#define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */ +#define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */ +#define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */ +#define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */ +#define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being + * selected */ +#define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */ +#define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only + */ +#define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */ +#define XST_SPI_SLAVE_MODE 1160 /* device has been addressed as slave */ +#define XST_SPI_RECEIVE_NOT_EMPTY 1161 /* device received data in slave mode */ + +#define XST_SPI_COMMAND_ERROR 1162 /* unrecognised command - qspi only */ + +/********************** OPB Arbiter statuses 1176 - 1200 *********************/ + +#define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either + * one master assigned to two or more + * priorities, or one master not + * assigned to any priority + */ +#define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the + * priority levels without first + * suspending the use of priority + * levels + */ +#define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but + * bus parking was not enabled + */ +#define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed + * priority mode to allow the + * priorities to be changed + */ + +/************************ Intc statuses 1201 - 1225 **************************/ + +#define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */ +#define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */ + +/********************** TmrCtr statuses 1226 - 1250 **************************/ + +#define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */ + +/********************** WdtTb statuses 1251 - 1275 ***************************/ + +#define XST_WDTTB_TIMER_FAILED 1251L + +/********************** PlbArb statuses 1276 - 1300 **************************/ + +#define XST_PLBARB_FAIL_SELFTEST 1276L + +/********************** Plb2Opb statuses 1301 - 1325 *************************/ + +#define XST_PLB2OPB_FAIL_SELFTEST 1301L + +/********************** Opb2Plb statuses 1326 - 1350 *************************/ + +#define XST_OPB2PLB_FAIL_SELFTEST 1326L + +/********************** SysAce statuses 1351 - 1360 **************************/ + +#define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */ + +/********************** PCI Bridge statuses 1361 - 1375 **********************/ + +#define XST_PCI_INVALID_ADDRESS 1361L + +/********************** FlexRay constants 1400 - 1409 *************************/ + +#define XST_FR_TX_ERROR 1400 +#define XST_FR_TX_BUSY 1401 +#define XST_FR_BUF_LOCKED 1402 +#define XST_FR_NO_BUF 1403 + +/****************** USB constants 1410 - 1420 *******************************/ + +#define XST_USB_ALREADY_CONFIGURED 1410 +#define XST_USB_BUF_ALIGN_ERROR 1411 +#define XST_USB_NO_DESC_AVAILABLE 1412 +#define XST_USB_BUF_TOO_BIG 1413 +#define XST_USB_NO_BUF 1414 + +/****************** HWICAP constants 1421 - 1429 *****************************/ + +#define XST_HWICAP_WRITE_DONE 1421 + + +/****************** AXI VDMA constants 1430 - 1440 *****************************/ + +#define XST_VDMA_MISMATCH_ERROR 1430 + +/*********************** NAND Flash statuses 1441 - 1459 *********************/ + +#define XST_NAND_BUSY 1441L /* Flash is erasing or + * programming + */ +#define XST_NAND_READY 1442L /* Flash is ready for commands + */ +#define XST_NAND_ERROR 1443L /* Flash had detected an + * internal error. + */ +#define XST_NAND_PART_NOT_SUPPORTED 1444L /* Flash type not supported by + * driver + */ +#define XST_NAND_OPT_NOT_SUPPORTED 1445L /* Operation not supported + */ +#define XST_NAND_TIMEOUT_ERROR 1446L /* Programming or erase + * operation aborted due to a + * timeout + */ +#define XST_NAND_ADDRESS_ERROR 1447L /* Accessed flash outside its + * addressible range + */ +#define XST_NAND_ALIGNMENT_ERROR 1448L /* Write alignment error + */ +#define XST_NAND_PARAM_PAGE_ERROR 1449L /* Failed to read parameter + * page of the device + */ +#define XST_NAND_CACHE_ERROR 1450L /* Flash page buffer error + */ + +#define XST_NAND_WRITE_PROTECTED 1451L /* Flash is write protected + */ + +/**************************** Type Definitions *******************************/ + +typedef int XStatus; + +/***************** Macros (Inline Functions) Definitions *********************/ + + +/************************** Function Prototypes ******************************/ + +#ifdef __cplusplus +} +#endif + +#endif /* end of protection macro */ |