diff options
Diffstat (limited to 'FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_cache.h')
| -rw-r--r-- | FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_cache.h | 436 |
1 files changed, 436 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_cache.h b/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_cache.h new file mode 100644 index 000000000..9500d6815 --- /dev/null +++ b/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_cache.h @@ -0,0 +1,436 @@ +/******************************************************************************* + * Copyright 2019-2021 Microchip FPGA Embedded Systems Solutions. + * + * SPDX-License-Identifier: MIT + * + * @file hw_cache.h + * @author Microchip-FPGA Embedded Systems Solutions + * + * + * Note 1: This file should not be edited. If you need to modify a parameter + * without going through regenerating using the MSS Configurator Libero flow + * or editing the associated xml file + * the following method is recommended: + + * 1. edit the following file + * boards/your_board/platform_config/mpfs_hal_config/mss_sw_config.h + + * 2. define the value you want to override there. + * (Note: There is a commented example in the platform directory) + + * Note 2: The definition in mss_sw_config.h takes precedence, as + * mss_sw_config.h is included prior to the generated header files located in + * boards/your_board/fpga_design_config + * + */ + +#ifndef HW_CACHE_H_ +#define HW_CACHE_H_ + + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined (LIBERO_SETTING_WAY_ENABLE) +/*Way indexes less than or equal to this register value may be used by the +cache. E.g. set to 0x7, will allocate 8 cache ways, 0-7 to cache, and leave +8-15 as LIM. Note 1: Way 0 is always allocated as cache. Note 2: each way is +128KB. */ +#define LIBERO_SETTING_WAY_ENABLE 0x0000000BUL + /* WAY_ENABLE [0:8] RW value= 0xB */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_DMA) +/*Way mask register master DMA. Set field to zero to disable way from this +master. The available cache ways are 0 to number set in WAY_ENABLE register. If +using scratch pad memory, the ways you want reserved for scrathpad are not +available for selection, you must set to 0. e.g. If three ways reserved for +scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for all +masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_DMA 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_AXI4_PORT_0) +/*Way mask register master DMA. Set field to zero to disable way from this +master. The available cache ways are 0 to number set in WAY_ENABLE register. If +using scratch pad memory, the ways you want reserved for scrathpad are not +available for selection, you must set to 0. e.g. If three ways reserved for +scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for all +masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_AXI4_PORT_0 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_AXI4_PORT_1) +/*Way mask register master DMA. Set field to zero to disable way from this +master. The available cache ways are 0 to number set in WAY_ENABLE register. If +using scratch pad memory, the ways you want reserved for scrathpad are not +available for selection, you must set to 0. e.g. If three ways reserved for +scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for all +masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_AXI4_PORT_1 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_AXI4_PORT_2) +/*Way mask registerAXI slave port 2. Set field to zero to disable way from this +master. The available cache ways are 0 to number set in WAY_ENABLE register. If +using scratch pad memory, the ways you want reserved for scrathpad are not +available for selection, you must set to 0. e.g. If three ways reserved for +scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for all +masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_AXI4_PORT_2 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_AXI4_PORT_3) +/*Way mask register AXI slave port 3. Set field to 1 to disable way from this +master. Set field to zero to disable way from this master. The available cache +ways are 0 to number set in WAY_ENABLE register. If using scratch pad memory, +the ways you want reserved for scrathpad are not available for selection, you +must set to 0. e.g. If three ways reserved for scratchpad, WAY_MASK_0, +WAY_MASK_1 and WAY_MASK_2 will be set to zero for all masters, so they can not +evict the way. */ +#define LIBERO_SETTING_WAY_MASK_AXI4_PORT_3 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_E51_DCACHE) +/*Way mask register E51 data cache (hart0). Set field to zero to disable way +from this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_E51_DCACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_E51_ICACHE) +/*Way mask registerE52 instruction cache (hart0). Set field to zero to disable +way from this master. The available cache ways are 0 to number set in +WAY_ENABLE register. If using scratch pad memory, the ways you want reserved +for scrathpad are not available for selection, you must set to 0. e.g. If three +ways reserved for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set +to zero for all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_E51_ICACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_1_DCACHE) +/*Way mask register data cache (hart1). Set field to zero to disable way from +this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_1_DCACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_1_ICACHE) +/*Way mask register instruction cache (hart1). Set field to zero to disable way +from this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_1_ICACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_2_DCACHE) +/*Way mask register data cache (hart2). Set field to 1 to disable way from this +master. Set field to zero to disable way from this master. The available cache +ways are 0 to number set in WAY_ENABLE register. If using scratch pad memory, +the ways you want reserved for scrathpad are not available for selection, you +must set to 0. e.g. If three ways reserved for scratchpad, WAY_MASK_0, +WAY_MASK_1 and WAY_MASK_2 will be set to zero for all masters, so they can not +evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_2_DCACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_2_ICACHE) +/*Way mask register instruction cache (hart2). Set field to zero to disable way +from this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_2_ICACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_3_DCACHE) +/*Way mask register data cache (hart3). Set field to 1 to disable way from this +master.Set field to zero to disable way from this master. The available cache +ways are 0 to number set in WAY_ENABLE register. If using scratch pad memory, +the ways you want reserved for scrathpad are not available for selection, you +must set to 0. e.g. If three ways reserved for scratchpad, WAY_MASK_0, +WAY_MASK_1 and WAY_MASK_2 will be set to zero for all masters, so they can not +evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_3_DCACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_3_ICACHE) +/*Way mask register instruction cache(hart3). Set field to zero to disable way +from this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_3_ICACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_4_DCACHE) +/*Way mask register data cache (hart4). Set field to 1 to disable way from this +master. Set field to zero to disable way from this master. The available cache +ways are 0 to number set in WAY_ENABLE register. If using scratch pad memory, +the ways you want reserved for scrathpad are not available for selection, you +must set to 0. e.g. If three ways reserved for scratchpad, WAY_MASK_0, +WAY_MASK_1 and WAY_MASK_2 will be set to zero for all masters, so they can not +evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_4_DCACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_WAY_MASK_U54_4_ICACHE) +/*Way mask register instruction cache (hart4). Set field to zero to disable way +from this master. The available cache ways are 0 to number set in WAY_ENABLE +register. If using scratch pad memory, the ways you want reserved for scrathpad +are not available for selection, you must set to 0. e.g. If three ways reserved +for scratchpad, WAY_MASK_0, WAY_MASK_1 and WAY_MASK_2 will be set to zero for +all masters, so they can not evict the way. */ +#define LIBERO_SETTING_WAY_MASK_U54_4_ICACHE 0x0000F0FFUL + /* WAY_MASK_0 [0:1] RW value= 0x1 */ + /* WAY_MASK_1 [1:1] RW value= 0x1 */ + /* WAY_MASK_2 [2:1] RW value= 0x1 */ + /* WAY_MASK_3 [3:1] RW value= 0x1 */ + /* WAY_MASK_4 [4:1] RW value= 0x1 */ + /* WAY_MASK_5 [5:1] RW value= 0x1 */ + /* WAY_MASK_6 [6:1] RW value= 0x1 */ + /* WAY_MASK_7 [7:1] RW value= 0x1 */ + /* WAY_MASK_8 [8:1] RW value= 0x0 */ + /* WAY_MASK_9 [9:1] RW value= 0x0 */ + /* WAY_MASK_10 [10:1] RW value= 0x0 */ + /* WAY_MASK_11 [11:1] RW value= 0x0 */ + /* WAY_MASK_12 [12:1] RW value= 0x1 */ + /* WAY_MASK_13 [13:1] RW value= 0x1 */ + /* WAY_MASK_14 [14:1] RW value= 0x1 */ + /* WAY_MASK_15 [15:1] RW value= 0x1 */ +#endif +#if !defined (LIBERO_SETTING_NUM_SCRATCH_PAD_WAYS) +/*Number of ways reserved for scratchpad. Note 1: This is not a register Note +2: each way is 128KB. Note 3: Embedded software expects cache ways allocated +for scratchpad start at way 0, and work up. */ +#define LIBERO_SETTING_NUM_SCRATCH_PAD_WAYS 0x00000004UL + /* NUM_OF_WAYS [0:8] RW value= 0x4 */ +#endif + +#ifdef __cplusplus +} +#endif + + +#endif /* #ifdef HW_CACHE_H_ */ + |