diff options
Diffstat (limited to 'FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_mpu_crypto.h')
-rw-r--r-- | FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_mpu_crypto.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_mpu_crypto.h b/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_mpu_crypto.h new file mode 100644 index 000000000..e979f49d1 --- /dev/null +++ b/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/polarfire_hal/boards/icicle-kit-es/fpga_design_config/memory_map/hw_mpu_crypto.h @@ -0,0 +1,70 @@ +/******************************************************************************* + * Copyright 2019-2021 Microchip FPGA Embedded Systems Solutions. + * + * SPDX-License-Identifier: MIT + * + * @file hw_mpu_crypto.h + * @author Microchip-FPGA Embedded Systems Solutions + * + * + * Note 1: This file should not be edited. If you need to modify a parameter + * without going through regenerating using the MSS Configurator Libero flow + * or editing the associated xml file + * the following method is recommended: + + * 1. edit the following file + * boards/your_board/platform_config/mpfs_hal_config/mss_sw_config.h + + * 2. define the value you want to override there. + * (Note: There is a commented example in the platform directory) + + * Note 2: The definition in mss_sw_config.h takes precedence, as + * mss_sw_config.h is included prior to the generated header files located in + * boards/your_board/fpga_design_config + * + */ + +#ifndef HW_MPU_CRYPTO_H_ +#define HW_MPU_CRYPTO_H_ + + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined (LIBERO_SETTING_CRYPTO_MPU_CFG_PMP0) +/*mpu setup register, 64 bits */ +#define LIBERO_SETTING_CRYPTO_MPU_CFG_PMP0 0x1F00000FFFFFFFFFULL + /* PMP [0:38] RW value= 0xFFFFFFFFF */ + /* RESERVED [38:18] RW value= 0x0 */ + /* MODE [56:8] RW value= 0x1F */ +#endif +#if !defined (LIBERO_SETTING_CRYPTO_MPU_CFG_PMP1) +/*mpu setup register, 64 bits */ +#define LIBERO_SETTING_CRYPTO_MPU_CFG_PMP1 0x1F00000FFFFFFFFFULL + /* PMP [0:38] RW value= 0xFFFFFFFFF */ + /* RESERVED [38:18] RW value= 0x0 */ + /* MODE [56:8] RW value= 0x1F */ +#endif +#if !defined (LIBERO_SETTING_CRYPTO_MPU_CFG_PMP2) +/*pmp setup register, 64 bits */ +#define LIBERO_SETTING_CRYPTO_MPU_CFG_PMP2 0x1F00000FFFFFFFFFULL + /* PMP [0:38] RW value= 0xFFFFFFFFF */ + /* RESERVED [38:18] RW value= 0x0 */ + /* MODE [56:8] RW value= 0x1F */ +#endif +#if !defined (LIBERO_SETTING_CRYPTO_MPU_CFG_PMP3) +/*pmp setup register, 64 bits */ +#define LIBERO_SETTING_CRYPTO_MPU_CFG_PMP3 0x1F00000FFFFFFFFFULL + /* PMP [0:38] RW value= 0xFFFFFFFFF */ + /* RESERVED [38:18] RW value= 0x0 */ + /* MODE [56:8] RW value= 0x1F */ +#endif + +#ifdef __cplusplus +} +#endif + + +#endif /* #ifdef HW_MPU_CRYPTO_H_ */ + |