diff options
Diffstat (limited to 'FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h')
| -rw-r--r-- | FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h | 118 |
1 files changed, 118 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h b/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h new file mode 100644 index 000000000..198bcc6f5 --- /dev/null +++ b/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/board/pin_mux.h @@ -0,0 +1,118 @@ +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +#define IOCON_PIO_DIGITAL_EN 0x0100u /*!<@brief Enables digital function */ +#define IOCON_PIO_FUNC1 0x01u /*!<@brief Selects pin function 1 */ +#define IOCON_PIO_INV_DI 0x00u /*!<@brief Input function is not inverted */ +#define IOCON_PIO_MODE_INACT 0x00u /*!<@brief No addition pin function */ +#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!<@brief Open drain is disabled */ +#define IOCON_PIO_SLEW_STANDARD 0x00u /*!<@brief Standard mode, output slew rate control is enabled */ +#define PIO1_4_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_4_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */ +#define PIO1_6_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_6_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */ +#define PIO1_7_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_7_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */ +#define PIO1_9_DIGIMODE_DIGITAL 0x01u /*!<@brief Select Digital mode.: Enable Digital mode. Digital input is enabled. */ +#define PIO1_9_FUNC_ALT0 0x00u /*!<@brief Selects pin function.: Alternative connection 0. */ + +/*! @name PIO0_29 (number 92), UART_RX + @{ */ +#define BOARD_INITPINS_UART_RX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_UART_RX_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_UART_RX_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO0_30 (number 94), UART_TX + @{ */ +#define BOARD_INITPINS_UART_TX_PORT 0U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_UART_TX_PIN 30U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_UART_TX_PIN_MASK (1U << 30U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_4 (number 1), LED_BLUE + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_LED_BLUE_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITPINS_LED_BLUE_GPIO_PIN_MASK (1U << 4U) /*!<@brief GPIO pin mask */ +#define BOARD_INITPINS_LED_BLUE_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_LED_BLUE_PIN 4U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_LED_BLUE_PIN_MASK (1U << 4U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_6 (number 5), LED_RED + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_LED_RED_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITPINS_LED_RED_GPIO_PIN_MASK (1U << 6U) /*!<@brief GPIO pin mask */ +#define BOARD_INITPINS_LED_RED_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_LED_RED_PIN 6U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_LED_RED_PIN_MASK (1U << 6U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_7 (number 9), LED_GREEN + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_LED_GREEN_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITPINS_LED_GREEN_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ +#define BOARD_INITPINS_LED_GREEN_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_LED_GREEN_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_LED_GREEN_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PIO1_9 (number 10), USER_BUTTON + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 9U) /*!<@brief GPIO pin mask */ +#define BOARD_INITPINS_USER_BUTTON_PORT 1U /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITPINS_USER_BUTTON_PIN 9U /*!<@brief PORT pin number */ +#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 9U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitPins(void); /* Function assigned for the Cortex-M33 (Core #0) */ + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ |