diff options
Diffstat (limited to 'FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c')
-rw-r--r-- | FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c | 1160 |
1 files changed, 1160 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c b/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c new file mode 100644 index 000000000..1bbf23587 --- /dev/null +++ b/FreeRTOS/Demo/Safer_Interrupts_M33F_NXP_LPC55S69_MCUXpresso/NXP_Code/drivers/fsl_usart.c @@ -0,0 +1,1160 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2021 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_usart.h" +#include "fsl_device_registers.h" +#include "fsl_flexcomm.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.flexcomm_usart" +#endif + +/*! + * @brief Used for conversion from `flexcomm_usart_irq_handler_t` to `flexcomm_irq_handler_t` + */ +typedef union usart_to_flexcomm +{ + flexcomm_usart_irq_handler_t usart_master_handler; + flexcomm_irq_handler_t flexcomm_handler; +} usart_to_flexcomm_t; + +enum +{ + kUSART_TxIdle, /* TX idle. */ + kUSART_TxBusy, /* TX busy. */ + kUSART_RxIdle, /* RX idle. */ + kUSART_RxBusy /* RX busy. */ +}; + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/*! @brief IRQ name array */ +static const IRQn_Type s_usartIRQ[] = USART_IRQS; + +/*! @brief Array to map USART instance number to base address. */ +static const uint32_t s_usartBaseAddrs[FSL_FEATURE_SOC_USART_COUNT] = USART_BASE_ADDRS; + +/******************************************************************************* + * Code + ******************************************************************************/ + +/* Get the index corresponding to the USART */ +/*! brief Returns instance number for USART peripheral base address. */ +uint32_t USART_GetInstance(USART_Type *base) +{ + uint32_t i; + + for (i = 0; i < (uint32_t)FSL_FEATURE_SOC_USART_COUNT; i++) + { + if ((uint32_t)base == s_usartBaseAddrs[i]) + { + break; + } + } + + assert(i < (uint32_t)FSL_FEATURE_SOC_USART_COUNT); + return i; +} + +/*! + * brief Get the length of received data in RX ring buffer. + * + * param handle USART handle pointer. + * return Length of received data in RX ring buffer. + */ +size_t USART_TransferGetRxRingBufferLength(usart_handle_t *handle) +{ + size_t size; + + /* Check arguments */ + assert(NULL != handle); + uint16_t rxRingBufferHead = handle->rxRingBufferHead; + uint16_t rxRingBufferTail = handle->rxRingBufferTail; + + if (rxRingBufferTail > rxRingBufferHead) + { + size = (size_t)rxRingBufferHead + handle->rxRingBufferSize - (size_t)rxRingBufferTail; + } + else + { + size = (size_t)rxRingBufferHead - (size_t)rxRingBufferTail; + } + return size; +} + +static bool USART_TransferIsRxRingBufferFull(usart_handle_t *handle) +{ + bool full; + + /* Check arguments */ + assert(NULL != handle); + + if (USART_TransferGetRxRingBufferLength(handle) == (handle->rxRingBufferSize - 1U)) + { + full = true; + } + else + { + full = false; + } + return full; +} + +/*! + * brief Sets up the RX ring buffer. + * + * This function sets up the RX ring buffer to a specific USART handle. + * + * When the RX ring buffer is used, data received are stored into the ring buffer even when the + * user doesn't call the USART_TransferReceiveNonBlocking() API. If there is already data received + * in the ring buffer, the user can get the received data from the ring buffer directly. + * + * note When using the RX ring buffer, one byte is reserved for internal use. In other + * words, if p ringBufferSize is 32, then only 31 bytes are used for saving data. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param ringBuffer Start address of the ring buffer for background receiving. Pass NULL to disable the ring buffer. + * param ringBufferSize size of the ring buffer. + */ +void USART_TransferStartRingBuffer(USART_Type *base, usart_handle_t *handle, uint8_t *ringBuffer, size_t ringBufferSize) +{ + /* Check arguments */ + assert(NULL != base); + assert(NULL != handle); + assert(NULL != ringBuffer); + + /* Setup the ringbuffer address */ + handle->rxRingBuffer = ringBuffer; + handle->rxRingBufferSize = ringBufferSize; + handle->rxRingBufferHead = 0U; + handle->rxRingBufferTail = 0U; + /* ring buffer is ready we can start receiving data */ + base->FIFOINTENSET = USART_FIFOINTENSET_RXLVL_MASK | USART_FIFOINTENSET_RXERR_MASK; +} + +/*! + * brief Aborts the background transfer and uninstalls the ring buffer. + * + * This function aborts the background transfer and uninstalls the ring buffer. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + */ +void USART_TransferStopRingBuffer(USART_Type *base, usart_handle_t *handle) +{ + /* Check arguments */ + assert(NULL != base); + assert(NULL != handle); + + if (handle->rxState == (uint8_t)kUSART_RxIdle) + { + base->FIFOINTENCLR = USART_FIFOINTENCLR_RXLVL_MASK | USART_FIFOINTENCLR_RXERR_MASK; + } + handle->rxRingBuffer = NULL; + handle->rxRingBufferSize = 0U; + handle->rxRingBufferHead = 0U; + handle->rxRingBufferTail = 0U; +} + +/*! + * brief Initializes a USART instance with user configuration structure and peripheral clock. + * + * This function configures the USART module with the user-defined settings. The user can configure the configuration + * structure and also get the default configuration by using the USART_GetDefaultConfig() function. + * Example below shows how to use this API to configure USART. + * code + * usart_config_t usartConfig; + * usartConfig.baudRate_Bps = 115200U; + * usartConfig.parityMode = kUSART_ParityDisabled; + * usartConfig.stopBitCount = kUSART_OneStopBit; + * USART_Init(USART1, &usartConfig, 20000000U); + * endcode + * + * param base USART peripheral base address. + * param config Pointer to user-defined configuration structure. + * param srcClock_Hz USART clock source frequency in HZ. + * retval kStatus_USART_BaudrateNotSupport Baudrate is not support in current clock source. + * retval kStatus_InvalidArgument USART base address is not valid + * retval kStatus_Success Status USART initialize succeed + */ +status_t USART_Init(USART_Type *base, const usart_config_t *config, uint32_t srcClock_Hz) +{ + int result; + + /* check arguments */ + assert(!((NULL == base) || (NULL == config) || (0U == srcClock_Hz))); + if ((NULL == base) || (NULL == config) || (0U == srcClock_Hz)) + { + return kStatus_InvalidArgument; + } + + /* initialize flexcomm to USART mode */ + result = FLEXCOMM_Init(base, FLEXCOMM_PERIPH_USART); + if (kStatus_Success != result) + { + return result; + } + + if (config->enableTx) + { + /* empty and enable txFIFO */ + base->FIFOCFG |= USART_FIFOCFG_EMPTYTX_MASK | USART_FIFOCFG_ENABLETX_MASK; + /* setup trigger level */ + base->FIFOTRIG &= ~(USART_FIFOTRIG_TXLVL_MASK); + base->FIFOTRIG |= USART_FIFOTRIG_TXLVL(config->txWatermark); + /* enable trigger interrupt */ + base->FIFOTRIG |= USART_FIFOTRIG_TXLVLENA_MASK; + } + + /* empty and enable rxFIFO */ + if (config->enableRx) + { + base->FIFOCFG |= USART_FIFOCFG_EMPTYRX_MASK | USART_FIFOCFG_ENABLERX_MASK; + /* setup trigger level */ + base->FIFOTRIG &= ~(USART_FIFOTRIG_RXLVL_MASK); + base->FIFOTRIG |= USART_FIFOTRIG_RXLVL(config->rxWatermark); + /* enable trigger interrupt */ + base->FIFOTRIG |= USART_FIFOTRIG_RXLVLENA_MASK; + } + /* setup configuration and enable USART */ + base->CFG = USART_CFG_PARITYSEL(config->parityMode) | USART_CFG_STOPLEN(config->stopBitCount) | + USART_CFG_DATALEN(config->bitCountPerChar) | USART_CFG_LOOP(config->loopback) | + USART_CFG_SYNCEN((uint32_t)config->syncMode >> 1) | USART_CFG_SYNCMST((uint8_t)config->syncMode) | + USART_CFG_CLKPOL(config->clockPolarity) | USART_CFG_MODE32K(config->enableMode32k) | + USART_CFG_CTSEN(config->enableHardwareFlowControl) | USART_CFG_ENABLE_MASK; + + /* Setup baudrate */ + if (config->enableMode32k) + { + if ((9600U % config->baudRate_Bps) == 0U) + { + base->BRG = 9600U / config->baudRate_Bps; + } + else + { + return kStatus_USART_BaudrateNotSupport; + } + } + else + { + result = USART_SetBaudRate(base, config->baudRate_Bps, srcClock_Hz); + if (kStatus_Success != result) + { + return result; + } + } + /* Setting continuous Clock configuration. used for synchronous mode. */ + USART_EnableContinuousSCLK(base, config->enableContinuousSCLK); + + return kStatus_Success; +} + +/*! + * brief Deinitializes a USART instance. + * + * This function waits for TX complete, disables TX and RX, and disables the USART clock. + * + * param base USART peripheral base address. + */ +void USART_Deinit(USART_Type *base) +{ + /* Check arguments */ + assert(NULL != base); + while (0U == (base->STAT & USART_STAT_TXIDLE_MASK)) + { + } + /* Disable interrupts, disable dma requests, disable peripheral */ + base->FIFOINTENCLR = USART_FIFOINTENCLR_TXERR_MASK | USART_FIFOINTENCLR_RXERR_MASK | USART_FIFOINTENCLR_TXLVL_MASK | + USART_FIFOINTENCLR_RXLVL_MASK; + base->FIFOCFG &= ~(USART_FIFOCFG_DMATX_MASK | USART_FIFOCFG_DMARX_MASK); + base->CFG &= ~(USART_CFG_ENABLE_MASK); +} + +/*! + * brief Gets the default configuration structure. + * + * This function initializes the USART configuration structure to a default value. The default + * values are: + * usartConfig->baudRate_Bps = 115200U; + * usartConfig->parityMode = kUSART_ParityDisabled; + * usartConfig->stopBitCount = kUSART_OneStopBit; + * usartConfig->bitCountPerChar = kUSART_8BitsPerChar; + * usartConfig->loopback = false; + * usartConfig->enableTx = false; + * usartConfig->enableRx = false; + * + * param config Pointer to configuration structure. + */ +void USART_GetDefaultConfig(usart_config_t *config) +{ + /* Check arguments */ + assert(NULL != config); + + /* Initializes the configure structure to zero. */ + (void)memset(config, 0, sizeof(*config)); + + /* Set always all members ! */ + config->baudRate_Bps = 115200U; + config->parityMode = kUSART_ParityDisabled; + config->stopBitCount = kUSART_OneStopBit; + config->bitCountPerChar = kUSART_8BitsPerChar; + config->loopback = false; + config->enableRx = false; + config->enableTx = false; + config->enableMode32k = false; + config->txWatermark = kUSART_TxFifo0; + config->rxWatermark = kUSART_RxFifo1; + config->syncMode = kUSART_SyncModeDisabled; + config->enableContinuousSCLK = false; + config->clockPolarity = kUSART_RxSampleOnFallingEdge; + config->enableHardwareFlowControl = false; +} + +/*! + * brief Sets the USART instance baud rate. + * + * This function configures the USART module baud rate. This function is used to update + * the USART module baud rate after the USART module is initialized by the USART_Init. + * code + * USART_SetBaudRate(USART1, 115200U, 20000000U); + * endcode + * + * param base USART peripheral base address. + * param baudrate_Bps USART baudrate to be set. + * param srcClock_Hz USART clock source frequency in HZ. + * retval kStatus_USART_BaudrateNotSupport Baudrate is not support in current clock source. + * retval kStatus_Success Set baudrate succeed. + * retval kStatus_InvalidArgument One or more arguments are invalid. + */ +status_t USART_SetBaudRate(USART_Type *base, uint32_t baudrate_Bps, uint32_t srcClock_Hz) +{ + uint32_t best_diff = (uint32_t)-1, best_osrval = 0xf, best_brgval = (uint32_t)-1; + uint32_t osrval, brgval, diff, baudrate; + + /* check arguments */ + assert(!((NULL == base) || (0U == baudrate_Bps) || (0U == srcClock_Hz))); + if ((NULL == base) || (0U == baudrate_Bps) || (0U == srcClock_Hz)) + { + return kStatus_InvalidArgument; + } + + /* If synchronous master mode is enabled, only configure the BRG value. */ + if ((base->CFG & USART_CFG_SYNCEN_MASK) != 0U) + { + if ((base->CFG & USART_CFG_SYNCMST_MASK) != 0U) + { + brgval = srcClock_Hz / baudrate_Bps; + base->BRG = brgval - 1U; + } + } + else + { + /* + * Smaller values of OSR can make the sampling position within a data bit less accurate and may + * potentially cause more noise errors or incorrect data. + */ + for (osrval = best_osrval; osrval >= 8U; osrval--) + { + brgval = (((srcClock_Hz * 10U) / ((osrval + 1U) * baudrate_Bps)) - 5U) / 10U; + if (brgval > 0xFFFFU) + { + continue; + } + baudrate = srcClock_Hz / ((osrval + 1U) * (brgval + 1U)); + diff = (baudrate_Bps < baudrate) ? (baudrate - baudrate_Bps) : (baudrate_Bps - baudrate); + if (diff < best_diff) + { + best_diff = diff; + best_osrval = osrval; + best_brgval = brgval; + } + } + + /* Check to see if actual baud rate is within 3% of desired baud rate + * based on the best calculated OSR and BRG value */ + baudrate = srcClock_Hz / ((best_osrval + 1U) * (best_brgval + 1U)); + diff = (baudrate_Bps < baudrate) ? (baudrate - baudrate_Bps) : (baudrate_Bps - baudrate); + if (diff > ((baudrate_Bps / 100U) * 3U)) + { + return kStatus_USART_BaudrateNotSupport; + } + + /* value over range */ + if (best_brgval > 0xFFFFU) + { + return kStatus_USART_BaudrateNotSupport; + } + + base->OSR = best_osrval; + base->BRG = best_brgval; + } + + return kStatus_Success; +} + +/*! + * brief Enable 32 kHz mode which USART uses clock from the RTC oscillator as the clock source. + * + * Please note that in order to use a 32 kHz clock to operate USART properly, the RTC oscillator + * and its 32 kHz output must be manully enabled by user, by calling RTC_Init and setting + * SYSCON_RTCOSCCTRL_EN bit to 1. + * And in 32kHz clocking mode the USART can only work at 9600 baudrate or at the baudrate that + * 9600 can evenly divide, eg: 4800, 3200. + * + * param base USART peripheral base address. + * param baudRate_Bps USART baudrate to be set.. + * param enableMode32k true is 32k mode, false is normal mode. + * param srcClock_Hz USART clock source frequency in HZ. + * retval kStatus_USART_BaudrateNotSupport Baudrate is not support in current clock source. + * retval kStatus_Success Set baudrate succeed. + * retval kStatus_InvalidArgument One or more arguments are invalid. + */ +status_t USART_Enable32kMode(USART_Type *base, uint32_t baudRate_Bps, bool enableMode32k, uint32_t srcClock_Hz) +{ + status_t result = kStatus_Success; + base->CFG &= ~(USART_CFG_ENABLE_MASK); + if (enableMode32k) + { + base->CFG |= USART_CFG_MODE32K_MASK; + if ((9600U % baudRate_Bps) == 0U) + { + base->BRG = 9600U / baudRate_Bps - 1U; + } + else + { + return kStatus_USART_BaudrateNotSupport; + } + } + else + { + base->CFG &= ~(USART_CFG_MODE32K_MASK); + result = USART_SetBaudRate(base, baudRate_Bps, srcClock_Hz); + if (kStatus_Success != result) + { + return result; + } + } + base->CFG |= USART_CFG_ENABLE_MASK; + return result; +} + +/*! + * brief Enable 9-bit data mode for USART. + * + * This function set the 9-bit mode for USART module. The 9th bit is not used for parity thus can be modified by user. + * + * param base USART peripheral base address. + * param enable true to enable, false to disable. + */ +void USART_Enable9bitMode(USART_Type *base, bool enable) +{ + assert(base != NULL); + + uint32_t temp = 0U; + + if (enable) + { + /* Set USART 9-bit mode, disable parity. */ + temp = base->CFG & ~((uint32_t)USART_CFG_DATALEN_MASK | (uint32_t)USART_CFG_PARITYSEL_MASK); + temp |= (uint32_t)USART_CFG_DATALEN(0x2U); + base->CFG = temp; + } + else + { + /* Set USART to 8-bit mode. */ + base->CFG &= ~((uint32_t)USART_CFG_DATALEN_MASK); + base->CFG |= (uint32_t)USART_CFG_DATALEN(0x1U); + } +} + +/*! + * brief Transmit an address frame in 9-bit data mode. + * + * param base USART peripheral base address. + * param address USART slave address. + */ +void USART_SendAddress(USART_Type *base, uint8_t address) +{ + assert(base != NULL); + base->FIFOWR = ((uint32_t)address | 0x100UL); +} + +/*! + * brief Writes to the TX register using a blocking method. + * + * This function polls the TX register, waits for the TX register to be empty or for the TX FIFO + * to have room and writes data to the TX buffer. + * + * param base USART peripheral base address. + * param data Start address of the data to write. + * param length Size of the data to write. + * retval kStatus_USART_Timeout Transmission timed out and was aborted. + * retval kStatus_InvalidArgument Invalid argument. + * retval kStatus_Success Successfully wrote all data. + */ +status_t USART_WriteBlocking(USART_Type *base, const uint8_t *data, size_t length) +{ + /* Check arguments */ + assert(!((NULL == base) || (NULL == data))); +#if UART_RETRY_TIMES + uint32_t waitTimes; +#endif + if ((NULL == base) || (NULL == data)) + { + return kStatus_InvalidArgument; + } + /* Check whether txFIFO is enabled */ + if (0U == (base->FIFOCFG & USART_FIFOCFG_ENABLETX_MASK)) + { + return kStatus_InvalidArgument; + } + for (; length > 0U; length--) + { + /* Loop until txFIFO get some space for new data */ +#if UART_RETRY_TIMES + waitTimes = UART_RETRY_TIMES; + while ((0U == (base->FIFOSTAT & USART_FIFOSTAT_TXNOTFULL_MASK)) && (--waitTimes != 0U)) +#else + while (0U == (base->FIFOSTAT & USART_FIFOSTAT_TXNOTFULL_MASK)) +#endif + { + } +#if UART_RETRY_TIMES + if (0U == waitTimes) + { + return kStatus_USART_Timeout; + } +#endif + base->FIFOWR = *data; + data++; + } + /* Wait to finish transfer */ +#if UART_RETRY_TIMES + waitTimes = UART_RETRY_TIMES; + while ((0U == (base->STAT & USART_STAT_TXIDLE_MASK)) && (--waitTimes != 0U)) +#else + while (0U == (base->STAT & USART_STAT_TXIDLE_MASK)) +#endif + { + } +#if UART_RETRY_TIMES + if (0U == waitTimes) + { + return kStatus_USART_Timeout; + } +#endif + return kStatus_Success; +} + +/*! + * brief Read RX data register using a blocking method. + * + * This function polls the RX register, waits for the RX register to be full or for RX FIFO to + * have data and read data from the TX register. + * + * param base USART peripheral base address. + * param data Start address of the buffer to store the received data. + * param length Size of the buffer. + * retval kStatus_USART_FramingError Receiver overrun happened while receiving data. + * retval kStatus_USART_ParityError Noise error happened while receiving data. + * retval kStatus_USART_NoiseError Framing error happened while receiving data. + * retval kStatus_USART_RxError Overflow or underflow rxFIFO happened. + * retval kStatus_USART_Timeout Transmission timed out and was aborted. + * retval kStatus_Success Successfully received all data. + */ +status_t USART_ReadBlocking(USART_Type *base, uint8_t *data, size_t length) +{ + uint32_t statusFlag; + status_t status = kStatus_Success; +#if UART_RETRY_TIMES + uint32_t waitTimes; +#endif + + /* check arguments */ + assert(!((NULL == base) || (NULL == data))); + if ((NULL == base) || (NULL == data)) + { + return kStatus_InvalidArgument; + } + + /* Check whether rxFIFO is enabled */ + if ((base->FIFOCFG & USART_FIFOCFG_ENABLERX_MASK) == 0U) + { + return kStatus_Fail; + } + for (; length > 0U; length--) + { + /* loop until rxFIFO have some data to read */ +#if UART_RETRY_TIMES + waitTimes = UART_RETRY_TIMES; + while (((base->FIFOSTAT & USART_FIFOSTAT_RXNOTEMPTY_MASK) == 0U) && (--waitTimes != 0U)) +#else + while ((base->FIFOSTAT & USART_FIFOSTAT_RXNOTEMPTY_MASK) == 0U) +#endif + { + } +#if UART_RETRY_TIMES + if (waitTimes == 0U) + { + status = kStatus_USART_Timeout; + break; + } +#endif + /* check rxFIFO statusFlag */ + if ((base->FIFOSTAT & USART_FIFOSTAT_RXERR_MASK) != 0U) + { + base->FIFOCFG |= USART_FIFOCFG_EMPTYRX_MASK; + base->FIFOSTAT |= USART_FIFOSTAT_RXERR_MASK; + status = kStatus_USART_RxError; + break; + } + /* check receive statusFlag */ + statusFlag = base->STAT; + /* Clear all status flags */ + base->STAT |= statusFlag; + if ((statusFlag & USART_STAT_PARITYERRINT_MASK) != 0U) + { + status = kStatus_USART_ParityError; + } + if ((statusFlag & USART_STAT_FRAMERRINT_MASK) != 0U) + { + status = kStatus_USART_FramingError; + } + if ((statusFlag & USART_STAT_RXNOISEINT_MASK) != 0U) + { + status = kStatus_USART_NoiseError; + } + + if (kStatus_Success == status) + { + *data = (uint8_t)base->FIFORD; + data++; + } + else + { + break; + } + } + return status; +} + +/*! + * brief Initializes the USART handle. + * + * This function initializes the USART handle which can be used for other USART + * transactional APIs. Usually, for a specified USART instance, + * call this API once to get the initialized handle. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param callback The callback function. + * param userData The parameter of the callback function. + */ +status_t USART_TransferCreateHandle(USART_Type *base, + usart_handle_t *handle, + usart_transfer_callback_t callback, + void *userData) +{ + /* Check 'base' */ + assert(!((NULL == base) || (NULL == handle))); + + uint32_t instance = 0; + usart_to_flexcomm_t handler; + handler.usart_master_handler = USART_TransferHandleIRQ; + + if ((NULL == base) || (NULL == handle)) + { + return kStatus_InvalidArgument; + } + + instance = USART_GetInstance(base); + + (void)memset(handle, 0, sizeof(*handle)); + /* Set the TX/RX state. */ + handle->rxState = (uint8_t)kUSART_RxIdle; + handle->txState = (uint8_t)kUSART_TxIdle; + /* Set the callback and user data. */ + handle->callback = callback; + handle->userData = userData; + handle->rxWatermark = (uint8_t)USART_FIFOTRIG_RXLVL_GET(base); + handle->txWatermark = (uint8_t)USART_FIFOTRIG_TXLVL_GET(base); + + FLEXCOMM_SetIRQHandler(base, handler.flexcomm_handler, handle); + + /* Enable interrupt in NVIC. */ + (void)EnableIRQ(s_usartIRQ[instance]); + + return kStatus_Success; +} + +/*! + * brief Transmits a buffer of data using the interrupt method. + * + * This function sends data using an interrupt method. This is a non-blocking function, which + * returns directly without waiting for all data to be written to the TX register. When + * all data is written to the TX register in the IRQ handler, the USART driver calls the callback + * function and passes the ref kStatus_USART_TxIdle as status parameter. + * + * note The kStatus_USART_TxIdle is passed to the upper layer when all data is written + * to the TX register. However it does not ensure that all data are sent out. Before disabling the TX, + * check the kUSART_TransmissionCompleteFlag to ensure that the TX is finished. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param xfer USART transfer structure. See #usart_transfer_t. + * retval kStatus_Success Successfully start the data transmission. + * retval kStatus_USART_TxBusy Previous transmission still not finished, data not all written to TX register yet. + * retval kStatus_InvalidArgument Invalid argument. + */ +status_t USART_TransferSendNonBlocking(USART_Type *base, usart_handle_t *handle, usart_transfer_t *xfer) +{ + /* Check arguments */ + assert(!((NULL == base) || (NULL == handle) || (NULL == xfer))); + if ((NULL == base) || (NULL == handle) || (NULL == xfer)) + { + return kStatus_InvalidArgument; + } + /* Check xfer members */ + assert(!((0U == xfer->dataSize) || (NULL == xfer->txData))); + if ((0U == xfer->dataSize) || (NULL == xfer->txData)) + { + return kStatus_InvalidArgument; + } + + /* Return error if current TX busy. */ + if ((uint8_t)kUSART_TxBusy == handle->txState) + { + return kStatus_USART_TxBusy; + } + else + { + /* Disable IRQ when configuring transfer handle, in case interrupt occurs during the process and messes up the + * handle value. */ + uint32_t interruptMask = USART_GetEnabledInterrupts(base); + USART_DisableInterrupts(base, interruptMask); + handle->txData = xfer->txData; + handle->txDataSize = xfer->dataSize; + handle->txDataSizeAll = xfer->dataSize; + handle->txState = (uint8_t)kUSART_TxBusy; + /* Enable transmiter interrupt and the previously disabled interrupt. */ + USART_EnableInterrupts(base, interruptMask | (uint32_t)kUSART_TxLevelInterruptEnable); + } + return kStatus_Success; +} + +/*! + * brief Aborts the interrupt-driven data transmit. + * + * This function aborts the interrupt driven data sending. The user can get the remainBtyes to find out + * how many bytes are still not sent out. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + */ +void USART_TransferAbortSend(USART_Type *base, usart_handle_t *handle) +{ + assert(NULL != handle); + + /* Disable interrupts */ + USART_DisableInterrupts(base, (uint32_t)kUSART_TxLevelInterruptEnable); + /* Empty txFIFO */ + base->FIFOCFG |= USART_FIFOCFG_EMPTYTX_MASK; + + handle->txDataSize = 0U; + handle->txState = (uint8_t)kUSART_TxIdle; +} + +/*! + * brief Get the number of bytes that have been sent out to bus. + * + * This function gets the number of bytes that have been sent out to bus by interrupt method. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param count Send bytes count. + * retval kStatus_NoTransferInProgress No send in progress. + * retval kStatus_InvalidArgument Parameter is invalid. + * retval kStatus_Success Get successfully through the parameter \p count; + */ +status_t USART_TransferGetSendCount(USART_Type *base, usart_handle_t *handle, uint32_t *count) +{ + assert(NULL != handle); + assert(NULL != count); + + if ((uint8_t)kUSART_TxIdle == handle->txState) + { + return kStatus_NoTransferInProgress; + } + + *count = handle->txDataSizeAll - handle->txDataSize - + ((base->FIFOSTAT & USART_FIFOSTAT_TXLVL_MASK) >> USART_FIFOSTAT_TXLVL_SHIFT); + + return kStatus_Success; +} + +/*! + * brief Receives a buffer of data using an interrupt method. + * + * This function receives data using an interrupt method. This is a non-blocking function, which + * returns without waiting for all data to be received. + * If the RX ring buffer is used and not empty, the data in the ring buffer is copied and + * the parameter p receivedBytes shows how many bytes are copied from the ring buffer. + * After copying, if the data in the ring buffer is not enough to read, the receive + * request is saved by the USART driver. When the new data arrives, the receive request + * is serviced first. When all data is received, the USART driver notifies the upper layer + * through a callback function and passes the status parameter ref kStatus_USART_RxIdle. + * For example, the upper layer needs 10 bytes but there are only 5 bytes in the ring buffer. + * The 5 bytes are copied to the xfer->data and this function returns with the + * parameter p receivedBytes set to 5. For the left 5 bytes, newly arrived data is + * saved from the xfer->data[5]. When 5 bytes are received, the USART driver notifies the upper layer. + * If the RX ring buffer is not enabled, this function enables the RX and RX interrupt + * to receive data to the xfer->data. When all data is received, the upper layer is notified. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param xfer USART transfer structure, see #usart_transfer_t. + * param receivedBytes Bytes received from the ring buffer directly. + * retval kStatus_Success Successfully queue the transfer into transmit queue. + * retval kStatus_USART_RxBusy Previous receive request is not finished. + * retval kStatus_InvalidArgument Invalid argument. + */ +status_t USART_TransferReceiveNonBlocking(USART_Type *base, + usart_handle_t *handle, + usart_transfer_t *xfer, + size_t *receivedBytes) +{ + uint32_t i; + /* How many bytes to copy from ring buffer to user memory. */ + size_t bytesToCopy = 0U; + /* How many bytes to receive. */ + size_t bytesToReceive; + /* How many bytes currently have received. */ + size_t bytesCurrentReceived; + uint32_t interruptMask = 0U; + + /* Check arguments */ + assert(!((NULL == base) || (NULL == handle) || (NULL == xfer))); + if ((NULL == base) || (NULL == handle) || (NULL == xfer)) + { + return kStatus_InvalidArgument; + } + /* Check xfer members */ + assert(!((0U == xfer->dataSize) || (NULL == xfer->rxData))); + if ((0U == xfer->dataSize) || (NULL == xfer->rxData)) + { + return kStatus_InvalidArgument; + } + + /* Enable address detect when address match is enabled. */ + if ((base->CFG & (uint32_t)USART_CFG_AUTOADDR_MASK) != 0U) + { + base->CTL |= (uint32_t)USART_CTL_ADDRDET_MASK; + } + + /* How to get data: + 1. If RX ring buffer is not enabled, then save xfer->data and xfer->dataSize + to uart handle, enable interrupt to store received data to xfer->data. When + all data received, trigger callback. + 2. If RX ring buffer is enabled and not empty, get data from ring buffer first. + If there are enough data in ring buffer, copy them to xfer->data and return. + If there are not enough data in ring buffer, copy all of them to xfer->data, + save the xfer->data remained empty space to uart handle, receive data + to this empty space and trigger callback when finished. */ + if ((uint8_t)kUSART_RxBusy == handle->rxState) + { + return kStatus_USART_RxBusy; + } + else + { + bytesToReceive = xfer->dataSize; + bytesCurrentReceived = 0U; + /* If RX ring buffer is used. */ + if (handle->rxRingBuffer != NULL) + { + /* Disable IRQ, protect ring buffer. */ + interruptMask = USART_GetEnabledInterrupts(base); + USART_DisableInterrupts(base, interruptMask); + + /* How many bytes in RX ring buffer currently. */ + bytesToCopy = USART_TransferGetRxRingBufferLength(handle); + if (bytesToCopy != 0U) + { + bytesToCopy = MIN(bytesToReceive, bytesToCopy); + bytesToReceive -= bytesToCopy; + /* Copy data from ring buffer to user memory. */ + for (i = 0U; i < bytesToCopy; i++) + { + xfer->rxData[bytesCurrentReceived++] = handle->rxRingBuffer[handle->rxRingBufferTail]; + /* Wrap to 0. Not use modulo (%) because it might be large and slow. */ + if ((size_t)handle->rxRingBufferTail + 1U == handle->rxRingBufferSize) + { + handle->rxRingBufferTail = 0U; + } + else + { + handle->rxRingBufferTail++; + } + } + } + /* If ring buffer does not have enough data, still need to read more data. */ + if (bytesToReceive != 0U) + { + /* No data in ring buffer, save the request to UART handle. */ + handle->rxData = xfer->rxData + bytesCurrentReceived; + handle->rxDataSize = bytesToReceive; + handle->rxDataSizeAll = xfer->dataSize; + handle->rxState = (uint8_t)kUSART_RxBusy; + } + /* Re-enable IRQ. */ + USART_EnableInterrupts(base, interruptMask); + /* Call user callback since all data are received. */ + if (0U == bytesToReceive) + { + if (handle->callback != NULL) + { + handle->callback(base, handle, kStatus_USART_RxIdle, handle->userData); + } + } + } + /* Ring buffer not used. */ + else + { + /* Disable IRQ when configuring transfer handle, in case interrupt occurs during the process and messes up + * the handle value. */ + interruptMask = USART_GetEnabledInterrupts(base); + USART_DisableInterrupts(base, interruptMask); + handle->rxData = xfer->rxData + bytesCurrentReceived; + handle->rxDataSize = bytesToReceive; + handle->rxDataSizeAll = bytesToReceive; + handle->rxState = (uint8_t)kUSART_RxBusy; + + /* Enable RX interrupt. */ + base->FIFOINTENSET = USART_FIFOINTENSET_RXLVL_MASK; + /* Re-enable IRQ. */ + USART_EnableInterrupts(base, interruptMask); + } + /* Return the how many bytes have read. */ + if (receivedBytes != NULL) + { + *receivedBytes = bytesCurrentReceived; + } + } + return kStatus_Success; +} + +/*! + * brief Aborts the interrupt-driven data receiving. + * + * This function aborts the interrupt-driven data receiving. The user can get the remainBytes to find out + * how many bytes not received yet. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + */ +void USART_TransferAbortReceive(USART_Type *base, usart_handle_t *handle) +{ + assert(NULL != handle); + + /* Only abort the receive to handle->rxData, the RX ring buffer is still working. */ + if (NULL == handle->rxRingBuffer) + { + /* Disable interrupts */ + USART_DisableInterrupts(base, (uint32_t)kUSART_RxLevelInterruptEnable); + /* Empty rxFIFO */ + base->FIFOCFG |= USART_FIFOCFG_EMPTYRX_MASK; + } + + handle->rxDataSize = 0U; + handle->rxState = (uint8_t)kUSART_RxIdle; +} + +/*! + * brief Get the number of bytes that have been received. + * + * This function gets the number of bytes that have been received. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + * param count Receive bytes count. + * retval kStatus_NoTransferInProgress No receive in progress. + * retval kStatus_InvalidArgument Parameter is invalid. + * retval kStatus_Success Get successfully through the parameter \p count; + */ +status_t USART_TransferGetReceiveCount(USART_Type *base, usart_handle_t *handle, uint32_t *count) +{ + assert(NULL != handle); + assert(NULL != count); + + if ((uint8_t)kUSART_RxIdle == handle->rxState) + { + return kStatus_NoTransferInProgress; + } + + *count = handle->rxDataSizeAll - handle->rxDataSize; + + return kStatus_Success; +} + +/*! + * brief USART IRQ handle function. + * + * This function handles the USART transmit and receive IRQ request. + * + * param base USART peripheral base address. + * param handle USART handle pointer. + */ +void USART_TransferHandleIRQ(USART_Type *base, usart_handle_t *handle) +{ + /* Check arguments */ + assert((NULL != base) && (NULL != handle)); + + bool receiveEnabled = ((handle->rxDataSize != 0U) || (handle->rxRingBuffer != NULL)); + bool sendEnabled = (handle->txDataSize != 0U); + uint8_t rxdata; + size_t tmpsize; + + /* If RX overrun. */ + if ((base->FIFOSTAT & USART_FIFOSTAT_RXERR_MASK) != 0U) + { + /* Clear rx error state. */ + base->FIFOSTAT |= USART_FIFOSTAT_RXERR_MASK; + /* clear rxFIFO */ + base->FIFOCFG |= USART_FIFOCFG_EMPTYRX_MASK; + /* Trigger callback. */ + if (handle->callback != NULL) + { + handle->callback(base, handle, kStatus_USART_RxError, handle->userData); + } + } + while ((receiveEnabled && ((base->FIFOSTAT & USART_FIFOSTAT_RXNOTEMPTY_MASK) != 0U)) || + (sendEnabled && ((base->FIFOSTAT & USART_FIFOSTAT_TXNOTFULL_MASK) != 0U))) + { + /* Receive data */ + if (receiveEnabled && ((base->FIFOSTAT & USART_FIFOSTAT_RXNOTEMPTY_MASK) != 0U)) + { + /* Clear address detect when RXFIFO has data. */ + base->CTL &= ~(uint32_t)USART_CTL_ADDRDET_MASK; + /* Receive to app bufffer if app buffer is present */ + if (handle->rxDataSize != 0U) + { + rxdata = (uint8_t)base->FIFORD; + *handle->rxData = rxdata; + handle->rxDataSize--; + handle->rxData++; + receiveEnabled = ((handle->rxDataSize != 0U) || (handle->rxRingBuffer != NULL)); + if (0U == handle->rxDataSize) + { + if (NULL == handle->rxRingBuffer) + { + base->FIFOINTENCLR = USART_FIFOINTENCLR_RXLVL_MASK | USART_FIFOINTENSET_RXERR_MASK; + } + handle->rxState = (uint8_t)kUSART_RxIdle; + if (handle->callback != NULL) + { + handle->callback(base, handle, kStatus_USART_RxIdle, handle->userData); + } + } + } + /* Otherwise receive to ring buffer if ring buffer is present */ + else + { + if (handle->rxRingBuffer != NULL) + { + /* If RX ring buffer is full, trigger callback to notify over run. */ + if (USART_TransferIsRxRingBufferFull(handle)) + { + if (handle->callback != NULL) + { + handle->callback(base, handle, kStatus_USART_RxRingBufferOverrun, handle->userData); + } + } + /* If ring buffer is still full after callback function, the oldest data is overridden. */ + if (USART_TransferIsRxRingBufferFull(handle)) + { + /* Increase handle->rxRingBufferTail to make room for new data. */ + if ((size_t)handle->rxRingBufferTail + 1U == handle->rxRingBufferSize) + { + handle->rxRingBufferTail = 0U; + } + else + { + handle->rxRingBufferTail++; + } + } + /* Read data. */ + rxdata = (uint8_t)base->FIFORD; + handle->rxRingBuffer[handle->rxRingBufferHead] = rxdata; + /* Increase handle->rxRingBufferHead. */ + if ((size_t)handle->rxRingBufferHead + 1U == handle->rxRingBufferSize) + { + handle->rxRingBufferHead = 0U; + } + else + { + handle->rxRingBufferHead++; + } + } + } + } + /* Send data */ + if (sendEnabled && ((base->FIFOSTAT & USART_FIFOSTAT_TXNOTFULL_MASK) != 0U)) + { + base->FIFOWR = *handle->txData; + handle->txDataSize--; + handle->txData++; + sendEnabled = handle->txDataSize != 0U; + if (!sendEnabled) + { + base->FIFOINTENCLR = USART_FIFOINTENCLR_TXLVL_MASK; + + base->INTENSET = USART_INTENSET_TXIDLEEN_MASK; + } + } + } + + /* Tx idle and the interrupt is enabled. */ + if ((0U != (base->INTENSET & USART_INTENSET_TXIDLEEN_MASK)) && (0U != (base->INTSTAT & USART_INTSTAT_TXIDLE_MASK))) + { + /* Set txState to idle only when all data has been sent out to bus. */ + handle->txState = (uint8_t)kUSART_TxIdle; + /* Disable tx idle interrupt */ + base->INTENCLR = USART_INTENCLR_TXIDLECLR_MASK; + + /* Trigger callback. */ + if (handle->callback != NULL) + { + handle->callback(base, handle, kStatus_USART_TxIdle, handle->userData); + } + } + + /* ring buffer is not used */ + if (NULL == handle->rxRingBuffer) + { + tmpsize = handle->rxDataSize; + + /* restore if rx transfer ends and rxLevel is different from default value */ + if ((tmpsize == 0U) && (USART_FIFOTRIG_RXLVL_GET(base) != handle->rxWatermark)) + { + base->FIFOTRIG = + (base->FIFOTRIG & (~USART_FIFOTRIG_RXLVL_MASK)) | USART_FIFOTRIG_RXLVL(handle->rxWatermark); + } + /* decrease level if rx transfer is bellow */ + if ((tmpsize != 0U) && (tmpsize < (USART_FIFOTRIG_RXLVL_GET(base) + 1U))) + { + base->FIFOTRIG = (base->FIFOTRIG & (~USART_FIFOTRIG_RXLVL_MASK)) | (USART_FIFOTRIG_RXLVL(tmpsize - 1U)); + } + } +} |