/* * FreeRTOS Kernel V10.3.0 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * http://www.FreeRTOS.org * http://aws.amazon.com/freertos */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * http://www.freertos.org/a00110.html * * The bottom of this file contains some constants specific to running the UDP * stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than * the demo) are contained in FreeRTOSIPConfig.h. *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 #define configMAX_PRIORITIES ( 7 ) #define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */ #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */ #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) ) #define configMAX_TASK_NAME_LEN ( 15 ) #define configUSE_TRACE_FACILITY 0 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 #define configUSE_CO_ROUTINES 0 #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configQUEUE_REGISTRY_SIZE 0 #define configUSE_APPLICATION_TASK_TAG 0 #define configUSE_COUNTING_SEMAPHORES 1 #define configUSE_ALTERNATIVE_API 0 #define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSUPPORT_STATIC_ALLOCATION 1 /* Hook function related definitions. */ #define configUSE_TICK_HOOK 0 #define configUSE_IDLE_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 #define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */ /* Software timer related definitions. */ #define configUSE_TIMERS 1 #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) #define configTIMER_QUEUE_LENGTH 5 #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) /* Event group related definitions. */ #define configUSE_EVENT_GROUPS 1 /* Run time stats gathering configuration options. */ #define configGENERATE_RUN_TIME_STATS 0 /* Co-routine definitions. */ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) /* Set the following definitions to 1 to include the API function, or zero * to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_uxTaskGetStackHighWaterMark 1 #define INCLUDE_xTaskGetSchedulerState 1 #define INCLUDE_xTimerGetTimerTaskHandle 0 #define INCLUDE_xTaskGetIdleTaskHandle 0 #define INCLUDE_xQueueGetMutexHolder 1 #define INCLUDE_eTaskGetState 1 #define INCLUDE_xEventGroupSetBitsFromISR 1 #define INCLUDE_xTimerPendFunctionCall 1 #define INCLUDE_pcTaskGetTaskName 1 /* This demo makes use of one or more example stats formatting functions. These * format the raw data provided by the uxTaskGetSystemState() function in to human * readable ASCII form. See the notes in the implementation of vTaskList() within * FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS * is set to 2 so the formatting functions are included without the stdio.h being * included in tasks.c. That is because this project defines its own sprintf() * functions. */ #define configUSE_STATS_FORMATTING_FUNCTIONS 1 /* Assert call defined for debug builds. */ #ifdef _DEBUG extern void vAssertCalled( const char * pcFile, uint32_t ulLine ); #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) #endif /* _DEBUG */ /* Application specific definitions follow. **********************************/ /* Only used when running in the FreeRTOS Windows simulator. Defines the * priority of the task used to simulate Ethernet interrupts. */ #define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 ) /* This demo creates a virtual network connection by accessing the raw Ethernet * or WiFi data to and from a real network connection. Many computers have more * than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell * the demo which real port should be used to create the virtual port. The ports * available are displayed on the console when the application is executed. For * example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 * results in the wired network being used, while setting * configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being * used. */ #define configNETWORK_INTERFACE_TO_USE ( 0L ) /* The address to which logging is sent should UDP logging be enabled. */ #define configUDP_LOGGING_ADDR0 192 #define configUDP_LOGGING_ADDR1 168 #define configUDP_LOGGING_ADDR2 0 #define configUDP_LOGGING_ADDR3 11 /* Default MAC address configuration. The demo creates a virtual network * connection that uses this MAC address by accessing the raw Ethernet/WiFi data * to and from a real network connection on the host PC. See the * configNETWORK_INTERFACE_TO_USE definition above for information on how to * configure the real network connection to use. */ #define configMAC_ADDR0 0x00 #define configMAC_ADDR1 0x11 #define configMAC_ADDR2 0x11 #define configMAC_ADDR3 0x11 #define configMAC_ADDR4 0x11 #define configMAC_ADDR5 0x41 /* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configIP_ADDR0 10 #define configIP_ADDR1 10 #define configIP_ADDR2 10 #define configIP_ADDR3 200 /* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to * 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configGATEWAY_ADDR0 10 #define configGATEWAY_ADDR1 10 #define configGATEWAY_ADDR2 10 #define configGATEWAY_ADDR3 1 /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and * 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set * to 1 but a DNS server cannot be contacted.*/ #define configDNS_SERVER_ADDR0 208 #define configDNS_SERVER_ADDR1 67 #define configDNS_SERVER_ADDR2 222 #define configDNS_SERVER_ADDR3 222 /* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or * ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ #define configNET_MASK0 255 #define configNET_MASK1 0 #define configNET_MASK2 0 #define configNET_MASK3 0 /* The UDP port to which print messages are sent. */ #define configPRINT_PORT ( 15000 ) #if ( defined( _MSC_VER ) && ( _MSC_VER <= 1600 ) && !defined( snprintf ) ) /* Map to Windows names. */ #define snprintf _snprintf #define vsnprintf _vsnprintf #endif /* Visual studio does not have an implementation of strcasecmp(). */ #define strcasecmp _stricmp #define strncasecmp _strnicmp #define strcmpi _strcmpi /* Prototype for the function used to print out. In this case it prints to the * console before the network is connected then a UDP port after the network has * connected. */ extern void vLoggingPrintf( const char * pcFormatString, ... ); #define configPRINTF( X ) vLoggingPrintf X #endif /* FREERTOS_CONFIG_H */