summaryrefslogtreecommitdiff
path: root/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h
diff options
context:
space:
mode:
Diffstat (limited to 'FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h')
-rw-r--r--FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h562
1 files changed, 281 insertions, 281 deletions
diff --git a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h b/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h
index 8ea5fa0c7..6729df0fe 100644
--- a/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h
+++ b/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/ATSAM4E/ethernet_phy.h
@@ -1,281 +1,281 @@
-/**
- * \file
- *
- * \brief KSZ8051MNL (Ethernet PHY) driver for SAM.
- *
- * Copyright (c) 2013 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
-
-#ifndef ETHERNET_PHY_H_INCLUDED
-#define ETHERNET_PHY_H_INCLUDED
-
-#include "compiler.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// IEEE defined Registers
-#define GMII_BMCR 0x00 // Basic Control
-#define GMII_BMSR 0x01 // Basic Status
-#define GMII_PHYID1 0x02 // PHY Idendifier 1
-#define GMII_PHYID2 0x03 // PHY Idendifier 2
-#define GMII_ANAR 0x04 // Auto_Negotiation Advertisement
-#define GMII_ANLPAR 0x05 // Auto_negotiation Link Partner Ability
-#define GMII_ANER 0x06 // Auto-negotiation Expansion
-#define GMII_ANNPR 0x07 // Auto-negotiation Next Page
-#define GMII_ANLPNPAR 0x08 // Link Partner Next Page Ability
-//#define GMII_1000BTCR 9 // 1000Base-T Control // Reserved
-//#define GMII_1000BTSR 10 // 1000Base-T Status // Reserved
-#define GMII_AFECR1 0x11 // AFE Control 1
-//#define GMII_ERDWR 12 // Extend Register - Data Write Register
-//#define GMII_ERDRR 13 // Extend Register - Data Read Register
-//14 reserved
-#define GMII_RXERCR 0x15 // RXER Counter
-
- #define PHY_REG_01_BMSR 0x01 // Basic mode status register
- #define PHY_REG_02_PHYSID1 0x02 // PHYS ID 1
- #define PHY_REG_03_PHYSID2 0x03 // PHYS ID 2
- #define PHY_REG_04_ADVERTISE 0x04 // Advertisement control reg
- #define PHY_REG_05_LPA 0x05 // Link partner ability reg
- #define PHY_REG_06_ANER 0x06 // 6 RW Auto-Negotiation Expansion Register
- #define PHY_REG_07_ANNPTR 0x07 // 7 RW Auto-Negotiation Next Page TX
- #define PHY_REG_08_RESERVED0 0x08 // 0x08..0x0Fh 8-15 RW RESERVED
-
- #define PHY_REG_10_PHYSTS 0x10 // 16 RO PHY Status Register
- #define PHY_REG_11_MICR 0x11 // 17 RW MII Interrupt Control Register
- #define PHY_REG_12_MISR 0x12 // 18 RO MII Interrupt Status Register
- #define PHY_REG_13_RESERVED1 0x13 // 19 RW RESERVED
- #define PHY_REG_14_FCSCR 0x14 // 20 RO False Carrier Sense Counter Register
- #define PHY_REG_15_RECR 0x15 // 21 RO Receive Error Counter Register
- #define PHY_REG_16_PCSR 0x16 // 22 RW PCS Sub-Layer Configuration and Status Register
- #define PHY_REG_17_RBR 0x17 // 23 RW RMII and Bypass Register
- #define PHY_REG_18_LEDCR 0x18 // 24 RW LED Direct Control Register
- #define PHY_REG_19_PHYCR 0x19 // 25 RW PHY Control Register
- #define PHY_REG_1A_10BTSCR 0x1A // 26 RW 10Base-T Status/Control Register
- #define PHY_REG_1B_CDCTRL1 0x1B // 27 RW CD Test Control Register and BIST Extensions Register
- #define PHY_REG_1B_INT_CTRL 0x1B // 27 RW KSZ8041NL interrupt control
- #define PHY_REG_1C_RESERVED2 0x1C // 28 RW RESERVED
- #define PHY_REG_1D_EDCR 0x1D // 29 RW Energy Detect Control Register
- #define PHY_REG_1E_RESERVED3 0x1E //
- #define PHY_REG_1F_RESERVED4 0x1F // 30-31 RW RESERVED
-
- #define PHY_REG_1E_PHYCR_1 0x1E //
- #define PHY_REG_1F_PHYCR_2 0x1F //
-
- #define PHY_SPEED_10 1
- #define PHY_SPEED_100 2
- #define PHY_SPEED_AUTO (PHY_SPEED_10|PHY_SPEED_100)
-
- #define PHY_MDIX_DIRECT 1
- #define PHY_MDIX_CROSSED 2
- #define PHY_MDIX_AUTO (PHY_MDIX_CROSSED|PHY_MDIX_DIRECT)
-
- #define PHY_DUPLEX_HALF 1
- #define PHY_DUPLEX_FULL 2
- #define PHY_DUPLEX_AUTO (PHY_DUPLEX_FULL|PHY_DUPLEX_HALF)
-
- typedef struct _SPhyProps {
- unsigned char speed;
- unsigned char mdix;
- unsigned char duplex;
- unsigned char spare;
- } SPhyProps;
-
- const char *phyPrintable (const SPhyProps *apProps);
-
- extern SPhyProps phyProps;
-
-#define GMII_OMSOR 0x16 // Operation Mode Strap Override
-#define GMII_OMSSR 0x17 // Operation Mode Strap Status
-#define GMII_ECR 0x18 // Expanded Control
-//#define GMII_DPPSR 19 // Digital PMA/PCS Status
-//20 reserved
-//#define GMII_RXERCR 21 // RXER Counter Register
-//22-26 reserved
-#define GMII_ICSR 0x1B // Interrupt Control/Status
-//#define GMII_DDC1R 28 // Digital Debug Control 1 Register
-#define GMII_LCSR 0x1D // LinkMD Control/Status
-
-//29-30 reserved
-#define GMII_PCR1 0x1E // PHY Control 1
-#define GMII_PCR2 0x1F // PHY Control 2
-
-/*
-//Extend Registers
-#define GMII_CCR 256 // Common Control Register
-#define GMII_SSR 257 // Strap Status Register
-#define GMII_OMSOR 258 // Operation Mode Strap Override Register
-#define GMII_OMSSR 259 // Operation Mode Strap Status Register
-#define GMII_RCCPSR 260 // RGMII Clock and Control Pad Skew Register
-#define GMII_RRDPSR 261 // RGMII RX Data Pad Skew Register
-#define GMII_ATR 263 // Analog Test Register
-*/
-
-
-// Bit definitions: GMII_BMCR 0x00 Basic Control
-#define GMII_RESET (1 << 15) // 1= Software Reset; 0=Normal Operation
-#define GMII_LOOPBACK (1 << 14) // 1=loopback Enabled; 0=Normal Operation
-#define GMII_SPEED_SELECT (1 << 13) // 1=100Mbps; 0=10Mbps
-#define GMII_AUTONEG (1 << 12) // Auto-negotiation Enable
-#define GMII_POWER_DOWN (1 << 11) // 1=Power down 0=Normal operation
-#define GMII_ISOLATE (1 << 10) // 1 = Isolates 0 = Normal operation
-#define GMII_RESTART_AUTONEG (1 << 9) // 1 = Restart auto-negotiation 0 = Normal operation
-#define GMII_DUPLEX_MODE (1 << 8) // 1 = Full duplex operation 0 = Normal operation
-#define GMII_COLLISION_TEST (1 << 7) // 1 = Enable COL test; 0 = Disable COL test
-//#define GMII_SPEED_SELECT_MSB (1 << 6) // Reserved
-// Reserved 6 to 0 // Read as 0, ignore on write
-
-// Bit definitions: GMII_BMSR 0x01 Basic Status
-#define GMII_100BASE_T4 (1 << 15) // 100BASE-T4 Capable
-#define GMII_100BASE_TX_FD (1 << 14) // 100BASE-TX Full Duplex Capable
-#define GMII_100BASE_T4_HD (1 << 13) // 100BASE-TX Half Duplex Capable
-#define GMII_10BASE_T_FD (1 << 12) // 10BASE-T Full Duplex Capable
-#define GMII_10BASE_T_HD (1 << 11) // 10BASE-T Half Duplex Capable
-// Reserved 10 to79 // Read as 0, ignore on write
-//#define GMII_EXTEND_STATUS (1 << 8) // 1 = Extend Status Information In Reg 15
-// Reserved 7
-#define GMII_MF_PREAMB_SUPPR (1 << 6) // MII Frame Preamble Suppression
-#define GMII_AUTONEG_COMP (1 << 5) // Auto-negotiation Complete
-#define GMII_REMOTE_FAULT (1 << 4) // Remote Fault
-#define GMII_AUTONEG_ABILITY (1 << 3) // Auto Configuration Ability
-#define GMII_LINK_STATUS (1 << 2) // Link Status
-#define GMII_JABBER_DETECT (1 << 1) // Jabber Detect
-#define GMII_EXTEND_CAPAB (1 << 0) // Extended Capability
-
-
-// Bit definitions: GMII_PHYID1 0x02 PHY Idendifier 1
-// Bit definitions: GMII_PHYID2 0x03 PHY Idendifier 2
-#define GMII_LSB_MASK 0x3F
-#define GMII_OUI_MSB 0x0022
-#define GMII_OUI_LSB 0x05
-
-
-// Bit definitions: GMII_ANAR 0x04 Auto_Negotiation Advertisement
-// Bit definitions: GMII_ANLPAR 0x05 Auto_negotiation Link Partner Ability
-#define GMII_NP (1 << 15) // Next page Indication
-// Reserved 7
-#define GMII_RF (1 << 13) // Remote Fault
-// Reserved 12 // Write as 0, ignore on read
-#define GMII_PAUSE_MASK (3 << 11) // 0,0 = No Pause 1,0 = Asymmetric Pause(link partner)
- // 0,1 = Symmetric Pause 1,1 = Symmetric&Asymmetric Pause(local device)
-#define GMII_100T4 (1 << 9) // 100BASE-T4 Support
-#define GMII_100TX_FDX (1 << 8) // 100BASE-TX Full Duplex Support
-#define GMII_100TX_HDX (1 << 7) // 100BASE-TX Support
-#define GMII_10_FDX (1 << 6) // 10BASE-T Full Duplex Support
-#define GMII_10_HDX (1 << 5) // 10BASE-T Support
-// Selector 4 to 0 // Protocol Selection Bits
-#define GMII_AN_IEEE_802_3 0x0001 // [00001] = IEEE 802.3
-
-
-// Bit definitions: GMII_ANER 0x06 Auto-negotiation Expansion
-// Reserved 15 to 5 // Read as 0, ignore on write
-#define GMII_PDF (1 << 4) // Local Device Parallel Detection Fault
-#define GMII_LP_NP_ABLE (1 << 3) // Link Partner Next Page Able
-#define GMII_NP_ABLE (1 << 2) // Local Device Next Page Able
-#define GMII_PAGE_RX (1 << 1) // New Page Received
-#define GMII_LP_AN_ABLE (1 << 0) // Link Partner Auto-negotiation Able
-
-/**
- * \brief Perform a HW initialization to the PHY and set up clocks.
- *
- * This should be called only once to initialize the PHY pre-settings.
- * The PHY address is the reset status of CRS, RXD[3:0] (the GmacPins' pullups).
- * The COL pin is used to select MII mode on reset (pulled up for Reduced MII).
- * The RXDV pin is used to select test mode on reset (pulled up for test mode).
- * The above pins should be predefined for corresponding settings in resetPins.
- * The GMAC peripheral pins are configured after the reset is done.
- *
- * \param p_gmac Pointer to the GMAC instance.
- * \param uc_phy_addr PHY address.
- * \param ul_mck GMAC MCK.
- *
- * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
- */
-uint8_t ethernet_phy_init(Gmac *p_gmac, uint8_t uc_phy_addr, uint32_t ul_mck);
-
-
-/**
- * \brief Get the Link & speed settings, and automatically set up the GMAC with the
- * settings.
- *
- * \param p_gmac Pointer to the GMAC instance.
- * \param uc_phy_addr PHY address.
- * \param uc_apply_setting_flag Set to 0 to not apply the PHY configurations, else to apply.
- *
- * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
- */
-uint8_t ethernet_phy_set_link(Gmac *p_gmac, uint8_t uc_phy_addr,
- uint8_t uc_apply_setting_flag);
-
-
-/**
- * \brief Issue an auto negotiation of the PHY.
- *
- * \param p_gmac Pointer to the GMAC instance.
- * \param uc_phy_addr PHY address.
- *
- * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
- */
-uint8_t ethernet_phy_auto_negotiate(Gmac *p_gmac, uint8_t uc_phy_addr);
-
-/**
- * \brief Issue a SW reset to reset all registers of the PHY.
- *
- * \param p_gmac Pointer to the GMAC instance.
- * \param uc_phy_addr PHY address.
- *
- * \Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
- */
-uint8_t ethernet_phy_reset(Gmac *p_gmac, uint8_t uc_phy_addr);
-
-typedef struct xPHY_PROPS {
- signed char phy_result;
- uint32_t phy_params;
- uint32_t phy_stat1;
- uint32_t phy_stat2;
- unsigned char phy_chn;
-} PhyProps_t;
-extern PhyProps_t phy_props;
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif /* #ifndef ETHERNET_PHY_H_INCLUDED */
-
+/**
+ * \file
+ *
+ * \brief KSZ8051MNL (Ethernet PHY) driver for SAM.
+ *
+ * Copyright (c) 2013 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef ETHERNET_PHY_H_INCLUDED
+#define ETHERNET_PHY_H_INCLUDED
+
+#include "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// IEEE defined Registers
+#define GMII_BMCR 0x00 // Basic Control
+#define GMII_BMSR 0x01 // Basic Status
+#define GMII_PHYID1 0x02 // PHY Idendifier 1
+#define GMII_PHYID2 0x03 // PHY Idendifier 2
+#define GMII_ANAR 0x04 // Auto_Negotiation Advertisement
+#define GMII_ANLPAR 0x05 // Auto_negotiation Link Partner Ability
+#define GMII_ANER 0x06 // Auto-negotiation Expansion
+#define GMII_ANNPR 0x07 // Auto-negotiation Next Page
+#define GMII_ANLPNPAR 0x08 // Link Partner Next Page Ability
+//#define GMII_1000BTCR 9 // 1000Base-T Control // Reserved
+//#define GMII_1000BTSR 10 // 1000Base-T Status // Reserved
+#define GMII_AFECR1 0x11 // AFE Control 1
+//#define GMII_ERDWR 12 // Extend Register - Data Write Register
+//#define GMII_ERDRR 13 // Extend Register - Data Read Register
+//14 reserved
+#define GMII_RXERCR 0x15 // RXER Counter
+
+ #define PHY_REG_01_BMSR 0x01 // Basic mode status register
+ #define PHY_REG_02_PHYSID1 0x02 // PHYS ID 1
+ #define PHY_REG_03_PHYSID2 0x03 // PHYS ID 2
+ #define PHY_REG_04_ADVERTISE 0x04 // Advertisement control reg
+ #define PHY_REG_05_LPA 0x05 // Link partner ability reg
+ #define PHY_REG_06_ANER 0x06 // 6 RW Auto-Negotiation Expansion Register
+ #define PHY_REG_07_ANNPTR 0x07 // 7 RW Auto-Negotiation Next Page TX
+ #define PHY_REG_08_RESERVED0 0x08 // 0x08..0x0Fh 8-15 RW RESERVED
+
+ #define PHY_REG_10_PHYSTS 0x10 // 16 RO PHY Status Register
+ #define PHY_REG_11_MICR 0x11 // 17 RW MII Interrupt Control Register
+ #define PHY_REG_12_MISR 0x12 // 18 RO MII Interrupt Status Register
+ #define PHY_REG_13_RESERVED1 0x13 // 19 RW RESERVED
+ #define PHY_REG_14_FCSCR 0x14 // 20 RO False Carrier Sense Counter Register
+ #define PHY_REG_15_RECR 0x15 // 21 RO Receive Error Counter Register
+ #define PHY_REG_16_PCSR 0x16 // 22 RW PCS Sub-Layer Configuration and Status Register
+ #define PHY_REG_17_RBR 0x17 // 23 RW RMII and Bypass Register
+ #define PHY_REG_18_LEDCR 0x18 // 24 RW LED Direct Control Register
+ #define PHY_REG_19_PHYCR 0x19 // 25 RW PHY Control Register
+ #define PHY_REG_1A_10BTSCR 0x1A // 26 RW 10Base-T Status/Control Register
+ #define PHY_REG_1B_CDCTRL1 0x1B // 27 RW CD Test Control Register and BIST Extensions Register
+ #define PHY_REG_1B_INT_CTRL 0x1B // 27 RW KSZ8041NL interrupt control
+ #define PHY_REG_1C_RESERVED2 0x1C // 28 RW RESERVED
+ #define PHY_REG_1D_EDCR 0x1D // 29 RW Energy Detect Control Register
+ #define PHY_REG_1E_RESERVED3 0x1E //
+ #define PHY_REG_1F_RESERVED4 0x1F // 30-31 RW RESERVED
+
+ #define PHY_REG_1E_PHYCR_1 0x1E //
+ #define PHY_REG_1F_PHYCR_2 0x1F //
+
+ #define PHY_SPEED_10 1
+ #define PHY_SPEED_100 2
+ #define PHY_SPEED_AUTO (PHY_SPEED_10|PHY_SPEED_100)
+
+ #define PHY_MDIX_DIRECT 1
+ #define PHY_MDIX_CROSSED 2
+ #define PHY_MDIX_AUTO (PHY_MDIX_CROSSED|PHY_MDIX_DIRECT)
+
+ #define PHY_DUPLEX_HALF 1
+ #define PHY_DUPLEX_FULL 2
+ #define PHY_DUPLEX_AUTO (PHY_DUPLEX_FULL|PHY_DUPLEX_HALF)
+
+ typedef struct _SPhyProps {
+ unsigned char speed;
+ unsigned char mdix;
+ unsigned char duplex;
+ unsigned char spare;
+ } SPhyProps;
+
+ const char *phyPrintable (const SPhyProps *apProps);
+
+ extern SPhyProps phyProps;
+
+#define GMII_OMSOR 0x16 // Operation Mode Strap Override
+#define GMII_OMSSR 0x17 // Operation Mode Strap Status
+#define GMII_ECR 0x18 // Expanded Control
+//#define GMII_DPPSR 19 // Digital PMA/PCS Status
+//20 reserved
+//#define GMII_RXERCR 21 // RXER Counter Register
+//22-26 reserved
+#define GMII_ICSR 0x1B // Interrupt Control/Status
+//#define GMII_DDC1R 28 // Digital Debug Control 1 Register
+#define GMII_LCSR 0x1D // LinkMD Control/Status
+
+//29-30 reserved
+#define GMII_PCR1 0x1E // PHY Control 1
+#define GMII_PCR2 0x1F // PHY Control 2
+
+/*
+//Extend Registers
+#define GMII_CCR 256 // Common Control Register
+#define GMII_SSR 257 // Strap Status Register
+#define GMII_OMSOR 258 // Operation Mode Strap Override Register
+#define GMII_OMSSR 259 // Operation Mode Strap Status Register
+#define GMII_RCCPSR 260 // RGMII Clock and Control Pad Skew Register
+#define GMII_RRDPSR 261 // RGMII RX Data Pad Skew Register
+#define GMII_ATR 263 // Analog Test Register
+*/
+
+
+// Bit definitions: GMII_BMCR 0x00 Basic Control
+#define GMII_RESET (1 << 15) // 1= Software Reset; 0=Normal Operation
+#define GMII_LOOPBACK (1 << 14) // 1=loopback Enabled; 0=Normal Operation
+#define GMII_SPEED_SELECT (1 << 13) // 1=100Mbps; 0=10Mbps
+#define GMII_AUTONEG (1 << 12) // Auto-negotiation Enable
+#define GMII_POWER_DOWN (1 << 11) // 1=Power down 0=Normal operation
+#define GMII_ISOLATE (1 << 10) // 1 = Isolates 0 = Normal operation
+#define GMII_RESTART_AUTONEG (1 << 9) // 1 = Restart auto-negotiation 0 = Normal operation
+#define GMII_DUPLEX_MODE (1 << 8) // 1 = Full duplex operation 0 = Normal operation
+#define GMII_COLLISION_TEST (1 << 7) // 1 = Enable COL test; 0 = Disable COL test
+//#define GMII_SPEED_SELECT_MSB (1 << 6) // Reserved
+// Reserved 6 to 0 // Read as 0, ignore on write
+
+// Bit definitions: GMII_BMSR 0x01 Basic Status
+#define GMII_100BASE_T4 (1 << 15) // 100BASE-T4 Capable
+#define GMII_100BASE_TX_FD (1 << 14) // 100BASE-TX Full Duplex Capable
+#define GMII_100BASE_T4_HD (1 << 13) // 100BASE-TX Half Duplex Capable
+#define GMII_10BASE_T_FD (1 << 12) // 10BASE-T Full Duplex Capable
+#define GMII_10BASE_T_HD (1 << 11) // 10BASE-T Half Duplex Capable
+// Reserved 10 to79 // Read as 0, ignore on write
+//#define GMII_EXTEND_STATUS (1 << 8) // 1 = Extend Status Information In Reg 15
+// Reserved 7
+#define GMII_MF_PREAMB_SUPPR (1 << 6) // MII Frame Preamble Suppression
+#define GMII_AUTONEG_COMP (1 << 5) // Auto-negotiation Complete
+#define GMII_REMOTE_FAULT (1 << 4) // Remote Fault
+#define GMII_AUTONEG_ABILITY (1 << 3) // Auto Configuration Ability
+#define GMII_LINK_STATUS (1 << 2) // Link Status
+#define GMII_JABBER_DETECT (1 << 1) // Jabber Detect
+#define GMII_EXTEND_CAPAB (1 << 0) // Extended Capability
+
+
+// Bit definitions: GMII_PHYID1 0x02 PHY Idendifier 1
+// Bit definitions: GMII_PHYID2 0x03 PHY Idendifier 2
+#define GMII_LSB_MASK 0x3F
+#define GMII_OUI_MSB 0x0022
+#define GMII_OUI_LSB 0x05
+
+
+// Bit definitions: GMII_ANAR 0x04 Auto_Negotiation Advertisement
+// Bit definitions: GMII_ANLPAR 0x05 Auto_negotiation Link Partner Ability
+#define GMII_NP (1 << 15) // Next page Indication
+// Reserved 7
+#define GMII_RF (1 << 13) // Remote Fault
+// Reserved 12 // Write as 0, ignore on read
+#define GMII_PAUSE_MASK (3 << 11) // 0,0 = No Pause 1,0 = Asymmetric Pause(link partner)
+ // 0,1 = Symmetric Pause 1,1 = Symmetric&Asymmetric Pause(local device)
+#define GMII_100T4 (1 << 9) // 100BASE-T4 Support
+#define GMII_100TX_FDX (1 << 8) // 100BASE-TX Full Duplex Support
+#define GMII_100TX_HDX (1 << 7) // 100BASE-TX Support
+#define GMII_10_FDX (1 << 6) // 10BASE-T Full Duplex Support
+#define GMII_10_HDX (1 << 5) // 10BASE-T Support
+// Selector 4 to 0 // Protocol Selection Bits
+#define GMII_AN_IEEE_802_3 0x0001 // [00001] = IEEE 802.3
+
+
+// Bit definitions: GMII_ANER 0x06 Auto-negotiation Expansion
+// Reserved 15 to 5 // Read as 0, ignore on write
+#define GMII_PDF (1 << 4) // Local Device Parallel Detection Fault
+#define GMII_LP_NP_ABLE (1 << 3) // Link Partner Next Page Able
+#define GMII_NP_ABLE (1 << 2) // Local Device Next Page Able
+#define GMII_PAGE_RX (1 << 1) // New Page Received
+#define GMII_LP_AN_ABLE (1 << 0) // Link Partner Auto-negotiation Able
+
+/**
+ * \brief Perform a HW initialization to the PHY and set up clocks.
+ *
+ * This should be called only once to initialize the PHY pre-settings.
+ * The PHY address is the reset status of CRS, RXD[3:0] (the GmacPins' pullups).
+ * The COL pin is used to select MII mode on reset (pulled up for Reduced MII).
+ * The RXDV pin is used to select test mode on reset (pulled up for test mode).
+ * The above pins should be predefined for corresponding settings in resetPins.
+ * The GMAC peripheral pins are configured after the reset is done.
+ *
+ * \param p_gmac Pointer to the GMAC instance.
+ * \param uc_phy_addr PHY address.
+ * \param ul_mck GMAC MCK.
+ *
+ * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
+ */
+uint8_t ethernet_phy_init(Gmac *p_gmac, uint8_t uc_phy_addr, uint32_t ul_mck);
+
+
+/**
+ * \brief Get the Link & speed settings, and automatically set up the GMAC with the
+ * settings.
+ *
+ * \param p_gmac Pointer to the GMAC instance.
+ * \param uc_phy_addr PHY address.
+ * \param uc_apply_setting_flag Set to 0 to not apply the PHY configurations, else to apply.
+ *
+ * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
+ */
+uint8_t ethernet_phy_set_link(Gmac *p_gmac, uint8_t uc_phy_addr,
+ uint8_t uc_apply_setting_flag);
+
+
+/**
+ * \brief Issue an auto negotiation of the PHY.
+ *
+ * \param p_gmac Pointer to the GMAC instance.
+ * \param uc_phy_addr PHY address.
+ *
+ * Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
+ */
+uint8_t ethernet_phy_auto_negotiate(Gmac *p_gmac, uint8_t uc_phy_addr);
+
+/**
+ * \brief Issue a SW reset to reset all registers of the PHY.
+ *
+ * \param p_gmac Pointer to the GMAC instance.
+ * \param uc_phy_addr PHY address.
+ *
+ * \Return GMAC_OK if successfully, GMAC_TIMEOUT if timeout.
+ */
+uint8_t ethernet_phy_reset(Gmac *p_gmac, uint8_t uc_phy_addr);
+
+typedef struct xPHY_PROPS {
+ signed char phy_result;
+ uint32_t phy_params;
+ uint32_t phy_stat1;
+ uint32_t phy_stat2;
+ unsigned char phy_chn;
+} PhyProps_t;
+extern PhyProps_t phy_props;
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif /* #ifndef ETHERNET_PHY_H_INCLUDED */
+
View Lorry Controller Status