diff options
Diffstat (limited to 'FreeRTOS/Demo/HCS12_CodeWarrior_banked/CODE/_COM0.H')
| -rw-r--r-- | FreeRTOS/Demo/HCS12_CodeWarrior_banked/CODE/_COM0.H | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/HCS12_CodeWarrior_banked/CODE/_COM0.H b/FreeRTOS/Demo/HCS12_CodeWarrior_banked/CODE/_COM0.H new file mode 100644 index 000000000..3f0e99a23 --- /dev/null +++ b/FreeRTOS/Demo/HCS12_CodeWarrior_banked/CODE/_COM0.H @@ -0,0 +1,191 @@ +/** ###################################################################
+** THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
+** Filename : COM0.H
+** Project : RTOSDemo
+** Processor : MC9S12DP256BCPV
+** Beantype : AsynchroSerial
+** Version : Bean 02.231, Driver 01.08, CPU db: 2.87.283
+** Compiler : Metrowerks HC12 C Compiler
+** Date/Time : 19/06/2005, 15:07
+** Abstract :
+** This bean "AsynchroSerial" implements an asynchronous serial
+** communication. The bean supports different settings of
+** parity, word width, stop-bit and communication speed,
+** user can select interrupt or polling handler.
+** Communication speed can be changed also in runtime.
+** The bean requires one on-chip asynchronous serial channel.
+** Settings :
+** Serial channel : SCI0
+**
+** Protocol
+** Init baud rate : 38400baud
+** Width : 8 bits
+** Stop bits : 1
+** Parity : none
+** Breaks : Disabled
+**
+** Registers
+** Input buffer : SCI0DRL [207]
+** Output buffer : SCI0DRL [207]
+** Control register : SCI0CR1 [202]
+** Mode register : SCI0CR2 [203]
+** Baud setting reg. : SCI0BD [200]
+** Special register : SCI0SR1 [204]
+**
+** Input interrupt
+** Vector name : INT_SCI0
+** Priority : 1
+**
+** Output interrupt
+** Vector name : INT_SCI0
+** Priority : 1
+**
+** Used pins :
+** ----------------------------------------------------
+** Function | On package | Name
+** ----------------------------------------------------
+** Input | 89 | PS0_RxD0
+** Output | 90 | PS1_TxD0
+** ----------------------------------------------------
+**
+**
+** Used baud modes :
+** ----------------------------------------------------
+** No. | Mode ID | Baud rate
+** ----------------------------------------------------
+** 0 | Bm_38400baud | 38400baud
+** 1 | Bm_19200baud | 19200baud
+** 2 | Bm_9600baud | 9600baud
+** 3 | Bm_4800baud | 4800baud
+** ----------------------------------------------------
+** Contents :
+** SetBaudRateMode - byte COM0_SetBaudRateMode(byte Mod);
+**
+** (c) Copyright UNIS, spol. s r.o. 1997-2002
+** UNIS, spol. s r.o.
+** Jundrovska 33
+** 624 00 Brno
+** Czech Republic
+** http : www.processorexpert.com
+** mail : info@processorexpert.com
+** ###################################################################*/
+
+#ifndef __COM0
+#define __COM0
+
+/* MODULE COM0. */
+
+#include "Cpu.h"
+
+#define COM0_Bm_38400baud 0 /* Constant for switch to mode 0 */
+#define COM0_Bm_19200baud 1 /* Constant for switch to mode 1 */
+#define COM0_Bm_9600baud 2 /* Constant for switch to mode 2 */
+#define COM0_Bm_4800baud 3 /* Constant for switch to mode 3 */
+
+
+
+#ifndef __BWUserType_tItem
+#define __BWUserType_tItem
+ typedef struct { /* Item of the index table for possible baudrates */
+ word div; /* divisior */
+ byte val; /* values of the prescalers */
+ } tItem;
+#endif
+#ifndef __BWUserType_COM0_TError
+#define __BWUserType_COM0_TError
+typedef union {
+ byte err;
+ struct {
+ bool OverRun : 1; /* OverRun error flag */
+ bool Framing : 1; /* Framing error flag */
+ bool Parity : 1; /* Parity error flag */
+ bool RxBufOvf : 1; /* Rx buffer full error flag */
+ bool Noise : 1; /* Noise error */
+ bool Break : 1; /* Break detect */
+ bool Idle : 1; /* Idle characted */
+ }errName;
+} COM0_TError;
+#endif
+#ifndef __BWUserType_TDirection
+#define __BWUserType_TDirection
+ typedef enum { /* */
+ TXD_INPUT,
+ TXD_OUTPUT
+ } TDirection;
+#endif
+
+#ifndef __BWUserType_COM0_TComData
+#define __BWUserType_COM0_TComData
+ typedef byte COM0_TComData ; /* User type for communication. Size of this type depends on the communication data witdh. */
+#endif
+
+#pragma CODE_SEG COM0_CODE /* Code section for this module. */
+
+byte COM0_SetBaudRateMode(byte Mod);
+/*
+** ===================================================================
+** Method : COM0_SetBaudRateMode (bean AsynchroSerial)
+**
+** Description :
+** This method changes the channel communication speed (baud
+** rate). This method can be used only if you specify a list
+** of possible period settings at design time (see <Timing
+** dialog box> - Runtime setting - from a list of values).
+** Each of these settings constitutes a mode and Processor
+** Expert^[TM] assigns them a mode identifier. The prescaler
+** and compare values corresponding to each mode are
+** calculated at design time. You may switch modes at
+** runtime by referring only to a mode identifier. No
+** run-time calculations are performed, all the calculations
+** are performed at design time.
+** Parameters :
+** NAME - DESCRIPTION
+** Mod - Timing mode to set
+** Returns :
+** --- - Error code, possible codes:
+** ERR_OK - OK
+** ERR_SPEED - This device does not work in
+** the active speed mode
+** ===================================================================
+*/
+
+#pragma CODE_SEG __NEAR_SEG NON_BANKED /* Interrupt section for this module. Placement will be in NON_BANKED area. */
+__interrupt void COM0_Interrupt(void);
+#pragma CODE_SEG COM0_CODE /* Code section for this module. */
+/*
+** ===================================================================
+** Method : COM0_Interrupt (bean AsynchroSerial)
+**
+** Description :
+** This method is internal. It is used by Processor Expert
+** only.
+** ===================================================================
+*/
+
+
+void COM0_Init(void);
+/*
+** ===================================================================
+** Method : COM0_Init (bean AsynchroSerial)
+**
+** Description :
+** This method is internal. It is used by Processor Expert
+** only.
+** ===================================================================
+*/
+
+
+#pragma CODE_SEG DEFAULT /* Change code section to DEFAULT. */
+
+/* END COM0. */
+
+/*
+** ###################################################################
+**
+** This file was created by UNIS Processor Expert 03.33 for
+** the Motorola HCS12 series of microcontrollers.
+**
+** ###################################################################
+*/
+
+#endif /* ifndef __COM0 */
|