diff options
Diffstat (limited to 'builds/freetype.mk')
-rw-r--r-- | builds/freetype.mk | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/builds/freetype.mk b/builds/freetype.mk deleted file mode 100644 index f8cfd411c..000000000 --- a/builds/freetype.mk +++ /dev/null @@ -1,339 +0,0 @@ -# -# FreeType 2 library sub-Makefile -# - - -# Copyright 1996-2017 by -# David Turner, Robert Wilhelm, and Werner Lemberg. -# -# This file is part of the FreeType project, and may only be used, modified, -# and distributed under the terms of the FreeType project license, -# LICENSE.TXT. By continuing to use, modify, or distribute this file you -# indicate that you have read the license and understand and accept it -# fully. - - -# DO NOT INVOKE THIS MAKEFILE DIRECTLY! IT IS MEANT TO BE INCLUDED BY -# OTHER MAKEFILES. - - -# The following variables (set by other Makefile components, in the -# environment, or on the command line) are used: -# -# BUILD_DIR The architecture dependent directory, -# e.g. `$(TOP_DIR)/builds/unix'. Added to INCLUDES also. -# -# OBJ_DIR The directory in which object files are created. -# -# LIB_DIR The directory in which the library is created. -# -# DOC_DIR The directory in which the API reference is created. -# -# INCLUDES A list of directories to be included additionally. -# -# DEVEL_DIR Development directory which is added to the INCLUDES -# variable before the standard include directories. -# -# CFLAGS Compilation flags. This overrides the default settings -# in the platform-specific configuration files. -# -# FTSYS_SRC If set, its value is used as the name of a replacement -# file for `src/base/ftsystem.c'. -# -# FTDEBUG_SRC If set, its value is used as the name of a replacement -# file for `src/base/ftdebug.c'. [For a normal build, this -# file does nothing.] -# -# FTMODULE_H The file which contains the list of module classes for -# the current build. Usually, this is automatically -# created by `modules.mk'. -# -# BASE_OBJ_S -# BASE_OBJ_M A list of base objects (for single object and multiple -# object builds, respectively). Set up in -# `src/base/rules.mk'. -# -# BASE_EXT_OBJ A list of base extension objects. Set up in -# `src/base/rules.mk'. -# -# DRV_OBJ_S -# DRV_OBJ_M A list of driver objects (for single object and multiple -# object builds, respectively). Set up cumulatively in -# `src/<driver>/rules.mk'. -# -# CLEAN -# DISTCLEAN The sub-makefiles can append additional stuff to these two -# variables which is to be removed for the `clean' resp. -# `distclean' target. -# -# TOP_DIR, SEP, -# COMPILER_SEP, -# LIBRARY, CC, -# A, I, O, T Check `config.mk' for details. - - -# The targets `objects' and `library' are defined at the end of this -# Makefile after all other rules have been included. -# -.PHONY: single multi objects library refdoc - -# default target -- build single objects and library -# -single: objects library - -# `multi' target -- build multiple objects and library -# -multi: objects library - - -# The FreeType source directory, usually `./src'. -# -SRC_DIR := $(TOP_DIR)/src - -# The directory where the base layer components are placed, usually -# `./src/base'. -# -BASE_DIR := $(SRC_DIR)/base - -# Other derived directories. -# -PUBLIC_DIR := $(TOP_DIR)/include/freetype -INTERNAL_DIR := $(PUBLIC_DIR)/internal -SERVICES_DIR := $(INTERNAL_DIR)/services -CONFIG_DIR := $(PUBLIC_DIR)/config - -# The documentation directory. -# -DOC_DIR ?= $(TOP_DIR)/docs/reference - -# The final name of the library file. -# -PROJECT_LIBRARY := $(LIB_DIR)/$(LIBRARY).$A - - -# include paths -# -# IMPORTANT NOTE: The architecture-dependent directory must ALWAYS be placed -# before the standard include list. Porters are then able to -# put their own version of some of the FreeType components -# in the `builds/<system>' directory, as these files will -# override the default sources. -# -INCLUDES := $(subst /,$(COMPILER_SEP),$(OBJ_DIR) \ - $(DEVEL_DIR) \ - $(BUILD_DIR) \ - $(TOP_DIR)/include) - -INCLUDE_FLAGS := $(INCLUDES:%=$I%) - -ifdef DEVEL_DIR - # We assume that all library dependencies for FreeType are fulfilled for a - # development build, so we directly access the necessary include directory - # information using `pkg-config'. - INCLUDE_FLAGS += $(shell pkg-config --cflags libpng \ - harfbuzz ) -endif - - -# C flags used for the compilation of an object file. This must include at -# least the paths for the `base' and `builds/<system>' directories; -# debug/optimization/warning flags + ansi compliance if needed. -# -# $(INCLUDE_FLAGS) should come before $(CFLAGS) to avoid problems with -# old FreeType versions. -# -# Note what we also define the macro FT2_BUILD_LIBRARY when building -# FreeType. This is required to let our sources include the internal -# headers (something forbidden by clients). -# -# Finally, we define FT_CONFIG_MODULES_H so that the compiler uses the -# generated version of `ftmodule.h' in $(OBJ_DIR). If there is an -# `ftoption.h' files in $(OBJ_DIR), define FT_CONFIG_OPTIONS_H too. -# -ifneq ($(wildcard $(OBJ_DIR)/ftoption.h),) - FTOPTION_H := $(OBJ_DIR)/ftoption.h - FTOPTION_FLAG := $DFT_CONFIG_OPTIONS_H="<ftoption.h>" -endif - -# `CPPFLAGS' might be specified by the user in the environment. -# -FT_CFLAGS = $(CPPFLAGS) \ - $(CFLAGS) \ - $DFT2_BUILD_LIBRARY \ - $DFT_CONFIG_MODULES_H="<ftmodule.h>" \ - $(FTOPTION_FLAG) - - -# Include the `exports' rules file. -# -include $(TOP_DIR)/builds/exports.mk - - -# Initialize the list of objects. -# -OBJECTS_LIST := - - -# Define $(PUBLIC_H) as the list of all public header files located in -# `$(TOP_DIR)/include/freetype'. $(INTERNAL_H), and $(CONFIG_H) are defined -# similarly. -# -# This is used to simplify the dependency rules -- if one of these files -# changes, the whole library is recompiled. -# -PUBLIC_H := $(wildcard $(PUBLIC_DIR)/*.h) -INTERNAL_H := $(wildcard $(INTERNAL_DIR)/*.h) \ - $(wildcard $(SERVICES_DIR)/*.h) -CONFIG_H := $(wildcard $(CONFIG_DIR)/*.h) \ - $(wildcard $(BUILD_DIR)/config/*.h) \ - $(FTMODULE_H) \ - $(FTOPTION_H) -DEVEL_H := $(wildcard $(TOP_DIR)/devel/*.h) - -FREETYPE_H := $(PUBLIC_H) $(INTERNAL_H) $(CONFIG_H) $(DEVEL_H) - - -FT_COMPILE := $(CC) $(ANSIFLAGS) $(INCLUDE_FLAGS) $(FT_CFLAGS) - -# ftsystem component -# -FTSYS_SRC ?= $(BASE_DIR)/ftsystem.c - -FTSYS_OBJ := $(OBJ_DIR)/ftsystem.$O - -OBJECTS_LIST += $(FTSYS_OBJ) - -$(FTSYS_OBJ): $(FTSYS_SRC) $(FREETYPE_H) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# ftdebug component -# -FTDEBUG_SRC ?= $(BASE_DIR)/ftdebug.c - -FTDEBUG_OBJ := $(OBJ_DIR)/ftdebug.$O - -OBJECTS_LIST += $(FTDEBUG_OBJ) - -$(FTDEBUG_OBJ): $(FTDEBUG_SRC) $(FREETYPE_H) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# Include all rule files from FreeType components. -# -include $(SRC_DIR)/base/rules.mk -include $(patsubst %,$(SRC_DIR)/%/rules.mk,$(MODULES)) - - -# ftinit component -# -# The C source `ftinit.c' contains the FreeType initialization routines. -# It is able to automatically register one or more drivers when the API -# function FT_Init_FreeType() is called. -# -# The set of initial drivers is determined by the driver Makefiles -# includes above. Each driver Makefile updates the FTINIT_xxx lists -# which contain additional include paths and macros used to compile the -# single `ftinit.c' source. -# -FTINIT_SRC := $(BASE_DIR)/ftinit.c -FTINIT_OBJ := $(OBJ_DIR)/ftinit.$O - -OBJECTS_LIST += $(FTINIT_OBJ) - -$(FTINIT_OBJ): $(FTINIT_SRC) $(FREETYPE_H) - $(FT_COMPILE) $T$(subst /,$(COMPILER_SEP),$@ $<) - - -# All FreeType library objects. -# -OBJ_M := $(BASE_OBJ_M) $(BASE_EXT_OBJ) $(DRV_OBJS_M) -OBJ_S := $(BASE_OBJ_S) $(BASE_EXT_OBJ) $(DRV_OBJS_S) - - -# The target `multi' on the Make command line indicates that we want to -# compile each source file independently. -# -# Otherwise, each module/driver is compiled in a single object file through -# source file inclusion (see `src/base/ftbase.c' or -# `src/truetype/truetype.c' for examples). -# -BASE_OBJECTS := $(OBJECTS_LIST) - -ifneq ($(findstring multi,$(MAKECMDGOALS)),) - OBJECTS_LIST += $(OBJ_M) -else - OBJECTS_LIST += $(OBJ_S) -endif - -objects: $(OBJECTS_LIST) - -library: $(PROJECT_LIBRARY) - - -# Option `-B' disables generation of .pyc files (available since python 2.6) -# -refdoc: - python -B $(SRC_DIR)/tools/docmaker/docmaker.py \ - --prefix=ft2 \ - --title=FreeType-$(version) \ - --output=$(DOC_DIR) \ - $(PUBLIC_DIR)/*.h \ - $(PUBLIC_DIR)/config/*.h \ - $(PUBLIC_DIR)/cache/*.h - - -.PHONY: clean_project_std distclean_project_std - -# Standard cleaning and distclean rules. These are not accepted -# on all systems though. -# -clean_project_std: - -$(DELETE) $(BASE_OBJECTS) $(OBJ_M) $(OBJ_S) $(CLEAN) - -distclean_project_std: clean_project_std - -$(DELETE) $(PROJECT_LIBRARY) - -$(DELETE) *.orig *~ core *.core $(DISTCLEAN) - - -.PHONY: clean_project_dos distclean_project_dos - -# The Dos command shell does not support very long list of arguments, so -# we are stuck with wildcards. -# -# Don't break the command lines with \; this prevents the "del" command from -# working correctly on Win9x. -# -clean_project_dos: - -$(DELETE) $(subst /,$(SEP),$(OBJ_DIR)/*.$O $(CLEAN) $(NO_OUTPUT)) - -distclean_project_dos: clean_project_dos - -$(DELETE) $(subst /,$(SEP),$(PROJECT_LIBRARY) $(DISTCLEAN) $(NO_OUTPUT)) - - -.PHONY: remove_config_mk remove_ftmodule_h - -# Remove configuration file (used for distclean). -# -remove_config_mk: - -$(DELETE) $(subst /,$(SEP),$(CONFIG_MK) $(NO_OUTPUT)) - -# Remove module list (used for distclean). -# -remove_ftmodule_h: - -$(DELETE) $(subst /,$(SEP),$(FTMODULE_H) $(NO_OUTPUT)) - - -.PHONY: clean distclean - -# The `config.mk' file must define `clean_freetype' and -# `distclean_freetype'. Implementations may use to relay these to either -# the `std' or `dos' versions from above, or simply provide their own -# implementation. -# -clean: clean_project -distclean: distclean_project remove_config_mk remove_ftmodule_h - -$(DELETE) $(subst /,$(SEP),$(DOC_DIR)/*.html $(NO_OUTPUT)) - - -# EOF |