[gcc]

2013-06-10  Michael Meissner  <meissner@linux.vnet.ibm.com>
	    Pat Haugen <pthaugen@us.ibm.com>
	    Peter Bergner <bergner@vnet.ibm.com>

	* config/rs6000/vector.md (GPR move splitter): Do not split moves
	of vectors in GPRS if they are direct moves or quad word load or
	store moves.

	* config/rs6000/rs6000-protos.h (rs6000_output_move_128bit): Add
	declaration.
	(direct_move_p): Likewise.
	(quad_load_store_p): Likewise.

	* config/rs6000/rs6000.c (enum rs6000_reg_type): Simplify register
	classes into bins based on the physical register type.
	(reg_class_to_reg_type): Likewise.
	(IS_STD_REG_TYPE): Likewise.
	(IS_FP_VECT_REG_TYPE): Likewise.
	(reload_fpr_gpr): Arrays to determine what insn to use if we can
	use direct move instructions.
	(reload_gpr_vsx): Likewise.
	(reload_vsx_gpr): Likewise.
	(rs6000_init_hard_regno_mode_ok): Precalculate the register type
	information that is a simplification of register classes.  Also
	precalculate direct move reload helpers.
	(direct_move_p): New function to return true if the operation can
	be done as a direct move instruciton.
	(quad_load_store_p): New function to return true if the operation
	is a quad memory operation.
	(rs6000_legitimize_address): If quad memory, only allow register
	indirect for TImode addresses.
	(rs6000_legitimate_address_p): Likewise.
	(enum reload_reg_type): Delete, replace with rs6000_reg_type.
	(rs6000_reload_register_type): Likewise.
	(register_to_reg_type): Return register type.
	(rs6000_secondary_reload_simple_move): New helper function for
	secondary reload and secondary memory needed to identify anything
	that is a simple move, and does not need reloading.
	(rs6000_secondary_reload_direct_move): New helper function for
	secondary reload to identify cases that can be done with several
	instructions via the direct move instructions.
	(rs6000_secondary_reload_move): New helper function for secondary
	reload to identify moves between register types that can be done.
	(rs6000_secondary_reload): Add support for quad memory operations
	and for direct move.
	(rs6000_secondary_memory_needed): Likewise.
	(rs6000_debug_secondary_memory_needed): Change argument names.
	(rs6000_output_move_128bit): New function to return the move to
	use for 128-bit moves, including knowing about the various
	limitations of quad memory operations.

	* config/rs6000/vsx.md (vsx_mov<mode>): Add support for quad
	memory operations.  call rs6000_output_move_128bit for the actual
	instruciton(s) to generate.
	(vsx_movti_64bit): Likewise.

	* config/rs6000/rs6000.md (UNSPEC_P8V_FMRGOW): New unspec values.
	(UNSPEC_P8V_MTVSRWZ): Likewise.
	(UNSPEC_P8V_RELOAD_FROM_GPR): Likewise.
	(UNSPEC_P8V_MTVSRD): Likewise.
	(UNSPEC_P8V_XXPERMDI): Likewise.
	(UNSPEC_P8V_RELOAD_FROM_VSX): Likewise.
	(UNSPEC_FUSION_GPR): Likewise.
	(FMOVE128_GPR): New iterator for direct move.
	(f32_lv): New mode attribute for load/store of SFmode/SDmode
	values.
	(f32_sv): Likewise.
	(f32_dm): Likewise.
	(zero_extend<mode>di2_internal1): Add support for power8 32-bit
	loads and direct move instructions.
	(zero_extendsidi2_lfiwzx): Likewise.
	(extendsidi2_lfiwax): Likewise.
	(extendsidi2_nocell): Likewise.
	(floatsi<mode>2_lfiwax): Likewise.
	(lfiwax): Likewise.
	(floatunssi<mode>2_lfiwzx): Likewise.
	(lfiwzx): Likewise.
	(fix_trunc<mode>_stfiwx): Likewise.
	(fixuns_trunc<mode>_stfiwx): Likewise.
	(mov<mode>_hardfloat, 32-bit floating point): Likewise.
	(mov<move>_hardfloat64, 64-bit floating point): Likewise.
	(parity<mode>2_cmpb): Set length/type attr.
	(unnamed shift right patterns, mov<mode>_internal2): Change type attr
	for 'mr.' to fast_compare.
	(bpermd_<mode>): Change type attr to popcnt.
	(p8_fmrgow_<mode>): New insns for power8 direct move support.
	(p8_mtvsrwz_1): Likewise.
	(p8_mtvsrwz_2): Likewise.
	(reload_fpr_from_gpr<mode>): Likewise.
	(p8_mtvsrd_1): Likewise.
	(p8_mtvsrd_2): Likewise.
	(p8_xxpermdi_<mode>): Likewise.
	(reload_vsx_from_gpr<mode>): Likewise.
	(reload_vsx_from_gprsf): Likewise.
	(p8_mfvsrd_3_<mode>): LIkewise.
	(reload_gpr_from_vsx<mode>): Likewise.
	(reload_gpr_from_vsxsf): Likewise.
	(p8_mfvsrd_4_disf): Likewise.
	(multi-word GPR splits): Do not split direct moves or quad memory
	operations.

[gcc/testsuite]
2013-06-10  Michael Meissner  <meissner@linux.vnet.ibm.com>
	    Pat Haugen <pthaugen@us.ibm.com>
	    Peter Bergner <bergner@vnet.ibm.com>

	* gcc.target/powerpc/direct-move-vint1.c: New tests for power8
	direct move instructions.
	* gcc.target/powerpc/direct-move-vint2.c: Likewise.
	* gcc.target/powerpc/direct-move.h: Likewise.
	* gcc.target/powerpc/direct-move-float1.c: Likewise.
	* gcc.target/powerpc/direct-move-float2.c: Likewise.
	* gcc.target/powerpc/direct-move-double1.c: Likewise.
	* gcc.target/powerpc/direct-move-double2.c: Likewise.
	* gcc.target/powerpc/direct-move-long1.c: Likewise.
	* gcc.target/powerpc/direct-move-long2.c: Likewise.



git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@199918 138bc75d-0d04-0410-961f-82ee72b054a4

1 files changed, 15 insertions, 0 deletions

diff --git a/gcc/testsuite/gcc.target/powerpc/direct-move-long1.c b/gcc/testsuite/gcc.target/powerpc/direct-move-long1.c
new file mode 100644
index 00000000000..907e802c72b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/direct-move-long1.c
@@ -0,0 +1,15 @@
+/* { dg-do compile { target { powerpc*-*-linux* && lp64 } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-skip-if "" { powerpc*-*-*spe* } { "*" } { "" } } */
+/* { dg-require-effective-target powerpc_p8vector_ok } */
+/* { dg-options "-mcpu=power8 -O2" } */
+/* { dg-final { scan-assembler-times "mtvsrd" 1 } } */
+/* { dg-final { scan-assembler-times "mfvsrd" 2 } } */
+
+/* Check code generation for direct move for long types.  */
+
+#define TYPE long
+#define IS_INT 1
+#define NO_ALTIVEC 1
+
+#include "direct-move.h"