* tree-vrp.c (execute_vrp): Do not pass dump argument to.

	loop_optimizer_init and loop_optimizer_finalize
	* tree-ssa-sink.c (execute_sink_code): Ditto.
	* tree-ssa-loop-ch.c (copy_loop_headers): Ditto.
	* tree-ssa-loop.c (tree_loop_optimizer_init, tree_ssa_loop_init,
	tree_ssa_loop_done): Ditto.
	* tree-ssa-pre.c (init_pre, fini_pre): Ditto.
	* sched-ebb.c: Include output.h.
	(schedule_ebbs): Do not use dump argument.
	* value-prof.h (struct profile_hooks): Remove profile_dump_file.
	* loop.c (loop_dump_stream): Removed.
	(loop_optimize, rest_of_handle_loop_optimize): Do not use dump
	argument.
	(scan_loop, move_movables, find_and_verify_loops, mark_loop_jump,
	emit_prefetch_instructions, loop_bivs_find, loop_bivs_check,
	final_biv_value, loop_biv_eliminable_p, loop_givs_rescan,
	loop_iterations, strength_reduce, record_biv, record_giv,
	final_giv_value, check_final_value, check_ext_dependent_givs,
	combine_givs, check_dbra_loop, maybe_eliminate_biv, load_mems,
	try_copy_prop, loop_delete_insns, try_swap_copy_prop): Use
	dump_file instead of loop_dump_stream.
	* ddg.c (print_ddg_edge, print_ddg, vcg_print_ddg): Do not call
	argument dump_file.
	* reorg.c (dbr_schedule, rest_of_handle_delay_slots): Do not use
	dump argument.
	* flow.c (life_analysis, rest_of_handle_life): Ditto.
	* haifa-sched.c: Include output.h
	(schedule_insns, sched_init): Do not use dump argument.
	* mode-switching.c (optimize_mode_switching): Ditto.
	* modulo-sched.c (stats_file): Removed.
	(print_node_sched_params): Do not call argument dump_file.
	(sms_schedule_by_order, loop_canon_p, sms_schedule,
	rest_of_handle_sms): Do not use dump argument.  Use dump_file instead
	of stats_file.
	* cse.c (cse_main, rest_of_handle_cse, rest_of_handle_cse2): Do not
	use dump argument.
	* loop-init.c (loop_optimizer_init, loop_optimizer_finalize,
	rtl_loop_init, rtl_loop_done): Ditto.
	* global.c (global_alloc, rest_of_handle_global_alloc): Ditto.
	* predict.c (combine_predictions_for_bb, tree_estimate_probability):
	Ditto.
	* recog.c (peephole2_optimize, rest_of_handle_peephole2): Ditto.
	* lcm.c (pre_edge_lcm, pre_edge_rev_lcm): Ditto.
	* regmove.c (fixup_match_1, fixup_match_2, regmove_optimize,
	rest_of_handle_regmove, rest_of_handle_stack_adjustments): Ditto.
	* emit-rtl.c (renumber_insns): Ditto.
	* cfgexpand.c (add_reg_br_prob_note, expand_gimple_cond_expr,
	expand_gimple_basic_block, tree_expand_cfg): Ditto.
	* regclass.c (regclass): Ditto.
	* tree-outof-ssa.c (analyze_edges_for_bb, perform_edge_inserts,
	remove_ssa_form, rewrite_out_of_ssa): Ditto.
	* reg-stack.c (compensate_edge, compensate_edges, convert_regs_1,
	convert_regs_2, convert_regs, reg_to_stack, rest_of_handle_stack_regs):
	Ditto.
	* sched-rgn.c (schedule_insns, rest_of_handle_sched): Ditto.
	* local-alloc.c (rest_of_handle_local_alloc): Do not pass dump_file
	to regclass.
	* gcse.c (gcse_file, debug_stderr): Removed.
	(gcse_main, bypass_jumps, rest_of_handle_jump_bypass,
	rest_of_handle_gcse): Do not use dump argument.
	(cprop_jump, cprop_insn, do_local_cprop, cprop, find_implicit_sets,
	one_cprop_pass, bypass_block, compute_pre_data, insert_insn_end_bb,
	pre_edge_insert, pre_insert_copy_insn, pre_delete, one_pre_gcse_pass,
	compute_code_hoist_vbeinout, compute_code_hoist_data,
	one_code_hoisting_pass, trim_ld_motion_mems, update_ld_motion_stores,
	compute_store_table, build_store_vectors, insert_insn_start_bb,
	insert_store, remove_reachable_equiv_notes, replace_store_insn,
	store_motion): Use dump_file instead of gcse_file.
	* ipa-type-escape.c (type_escape_execute): Remove debugging comments.
	* profile.c (profile_dump_file): Removed.
	(branch_prob): Use dump_file instead of profile_dump_file.
	* ipa.c (cgraph_remove_unreachable_nodes): Do not call argument
	dump_file.
	* tree-ssa-copy.c (dump_copy_of): Ditto.
	* rtl-factoring.c (rtl_seqabstr, rest_of_rtl_seqabstr): Do not pass
	dump file to life_analysis.
	* bt-load.c (branch_target_load_optimize): Ditto.
	* cfgcleanup.c (rest_of_handle_jump2): Do not pass dump_file to
	renumber_insns.
	* rtl.h (cse_main, renumber_insns, schedule_insns, schedule_ebbs,
	regclass, dbr_schedule): Declaration changed.
	* sched-int.h (sched_init): Declaration changed.
	* tree-profile.c (tree_profile_dump_file): Removed.
	(tree_profile_hooks): Removed profile_dump_file hook.
	* rtl-profile (rtl_profile_dump_file): Removed.
	(rtl_profile_hooks): emoved profile_dump_file hook.
	* cfgloop.h (loop_optimizer_init, loop_optimizer_finalize): Declaration
	changed.
	* c-gimplify.c (c_genericize): Do not call local variable dump_file.
	* tree-cfg.c (build_tree_cfg): Ditto.
	* Makefile.in (haifa-sched.o, sched-ebb.o): Add output.h dependency.
	* basic-block.h (life_analysis, pre_edge_lcm, pre_edge_rev_lcm):
	Declaration changed.
	* config/sh/sh.c (sh_output_mi_thunk): Do not pass dump_file to
	life_analysis and schedule_insns.
	* config/m68hc11/m68hc11.c (m68hc11_reorg): Do not pass dump_file to
	life_analysis.
	* config/mt/mt.c (mt_machine_reorg): Do not pass dump_file to
	dbr_schedule.
	* config/mips/mips.c (mips_reorg): Ditto.
	* config/ia64/ia64.c (ia64_reorg): Do not pass dump_file to
	schedule_ebbs.



git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@110656 138bc75d-0d04-0410-961f-82ee72b054a4

1 files changed, 19 insertions, 27 deletions

diff --git a/gcc/tree-outof-ssa.c b/gcc/tree-outof-ssa.c
index 2f36cc6cc81..78ec5e7b356 100644
--- a/gcc/tree-outof-ssa.c
+++ b/gcc/tree-outof-ssa.c
@@ -2052,11 +2052,10 @@ fini_analyze_edges_for_bb (void)
 
 
 /* Look at all the incoming edges to block BB, and decide where the best place
-   to insert the stmts on each edge are, and perform those insertions.   Output
-   any debug information to DEBUG_FILE.  */
+   to insert the stmts on each edge are, and perform those insertions.  */
 
 static void
-analyze_edges_for_bb (basic_block bb, FILE *debug_file)
+analyze_edges_for_bb (basic_block bb)
 {
   edge e;
   edge_iterator ei;
@@ -2180,8 +2179,8 @@ analyze_edges_for_bb (basic_block bb, FILE *debug_file)
     }
 
 
-  if (debug_file)
-    fprintf (debug_file, "\nOpportunities in BB %d for stmt/block reduction:\n",
+  if (dump_file)
+    fprintf (dump_file, "\nOpportunities in BB %d for stmt/block reduction:\n",
 	     bb->index);
 
   
@@ -2207,19 +2206,19 @@ analyze_edges_for_bb (basic_block bb, FILE *debug_file)
         new_edge = make_forwarder_block (leader->dest, same_stmt_list_p, 
 					 NULL);
 	bb = new_edge->dest;
-	if (debug_file)
+	if (dump_file)
 	  {
-	    fprintf (debug_file, "Splitting BB %d for Common stmt list.  ", 
+	    fprintf (dump_file, "Splitting BB %d for Common stmt list.  ", 
 		     leader->dest->index);
-	    fprintf (debug_file, "Original block is now BB%d.\n", bb->index);
-	    print_generic_stmt (debug_file, curr_stmt_list, TDF_VOPS);
+	    fprintf (dump_file, "Original block is now BB%d.\n", bb->index);
+	    print_generic_stmt (dump_file, curr_stmt_list, TDF_VOPS);
 	  }
 
 	FOR_EACH_EDGE (e, ei, new_edge->src->preds)
 	  {
 	    e->aux = NULL;
-	    if (debug_file)
-	      fprintf (debug_file, "  Edge (%d->%d) lands here.\n", 
+	    if (dump_file)
+	      fprintf (dump_file, "  Edge (%d->%d) lands here.\n", 
 		       e->src->index, e->dest->index);
 	  }
 
@@ -2246,11 +2245,10 @@ analyze_edges_for_bb (basic_block bb, FILE *debug_file)
 /* This function will analyze the insertions which were performed on edges,
    and decide whether they should be left on that edge, or whether it is more
    efficient to emit some subset of them in a single block.  All stmts are
-   inserted somewhere, and if non-NULL, debug information is printed via 
-   DUMP_FILE.  */
+   inserted somewhere.  */
 
 static void
-perform_edge_inserts (FILE *dump_file)
+perform_edge_inserts (void)
 {
   basic_block bb;
 
@@ -2268,9 +2266,9 @@ perform_edge_inserts (FILE *dump_file)
   init_analyze_edges_for_bb ();
 
   FOR_EACH_BB (bb)
-    analyze_edges_for_bb (bb, dump_file);
+    analyze_edges_for_bb (bb);
 
-  analyze_edges_for_bb (EXIT_BLOCK_PTR, dump_file);
+  analyze_edges_for_bb (EXIT_BLOCK_PTR);
 
   /* Free data structures used in analyze_edges_for_bb.   */
   fini_analyze_edges_for_bb ();
@@ -2311,21 +2309,17 @@ perform_edge_inserts (FILE *dump_file)
 }
 
 
-/* Remove the variables specified in MAP from SSA form.  Any debug information
-   is sent to DUMP.  FLAGS indicate what options should be used.  */
+/* Remove the variables specified in MAP from SSA form.  FLAGS indicate what
+   options should be used.  */
 
 static void
-remove_ssa_form (FILE *dump, var_map map, int flags)
+remove_ssa_form (var_map map, int flags)
 {
   tree_live_info_p liveinfo;
   basic_block bb;
   tree phi, next;
-  FILE *save;
   tree *values = NULL;
 
-  save = dump_file;
-  dump_file = dump;
-
   /* If we are not combining temps, don't calculate live ranges for variables
      with only one SSA version.  */
   if ((flags & SSANORM_COMBINE_TEMPS) == 0)
@@ -2396,9 +2390,7 @@ remove_ssa_form (FILE *dump, var_map map, int flags)
   fini_ssa_operands ();
 
   /* If any copies were inserted on edges, analyze and insert them now.  */
-  perform_edge_inserts (dump_file);
-
-  dump_file = save;
+  perform_edge_inserts ();
 }
 
 /* Search every PHI node for arguments associated with backedges which
@@ -2527,7 +2519,7 @@ rewrite_out_of_ssa (void)
   if (flag_tree_ter && !flag_mudflap)
     ssa_flags |= SSANORM_PERFORM_TER;
 
-  remove_ssa_form (dump_file, map, ssa_flags);
+  remove_ssa_form (map, ssa_flags);
 
   if (dump_file && (dump_flags & TDF_DETAILS))
     dump_tree_cfg (dump_file, dump_flags & ~TDF_DETAILS);