2015-11-09 Michael Meissner <meissner@linux.vnet.ibm.com>

	* config/rs6000/rs6000.opt (-mpower9-fusion): Add new switches for
	ISA 3.0 (power9).
	(-mpower9-vector): Likewise.
	(-mpower9-dform): Likewise.
	(-mpower9-minmax): Likewise.
	(-mtoc-fusion): Likewise.
	(-mmodulo): Likewise.
	(-mfloat128-hardware): Likewise.

	* config/rs6000/rs6000-cpus.def (ISA_3_0_MASKS_SERVER): Add option
	mask for ISA 3.0 (power9).
	(POWERPC_MASKS): Add new ISA 3.0 switches.
	(power9 cpu): Add power9 cpu.

	* config/rs6000/rs6000.h (ASM_CPU_POWER9_SPEC): Add support for
	power9.
	(ASM_CPU_SPEC): Likewise.
	(EXTRA_SPECS): Likewise.

	* config/rs6000/rs6000-opts.h (enum processor_type): Add
	PROCESSOR_POWER9.

	* config/rs6000/rs6000.c (power9_cost): Initial cost setup for
	power9.
	(rs6000_debug_reg_global): Add support for power9 fusion.
	(rs6000_setup_reg_addr_masks): Cache mode size.
	(rs6000_option_override_internal): Until real power9 tuning is
	added, use -mtune=power8 for -mcpu=power9.
	(rs6000_setup_reg_addr_masks): Do not allow pre-increment,
	pre-decrement, or pre-modify on SFmode/DFmode if we allow the use
	of Altivec registers.
	(rs6000_option_override_internal): Add support for ISA 3.0
	switches.
	(rs6000_loop_align): Add support for power9 cpu.
	(rs6000_file_start): Likewise.
	(rs6000_adjust_cost): Likewise.
	(rs6000_issue_rate): Likewise.
	(insn_must_be_first_in_group): Likewise.
	(insn_must_be_last_in_group): Likewise.
	(force_new_group): Likewise.
	(rs6000_register_move_cost): Likewise.
	(rs6000_opt_masks): Likewise.

	* config/rs6000/rs6000.md (cpu attribute): Add power9.
	* config/rs6000/rs6000-tables.opt: Regenerate.

	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
	_ARCH_PWR9 if power9 support is available.

	* config/rs6000/aix61.h (ASM_CPU_SPEC): Add power9.
	* config/rs6000/aix53.h (ASM_CPU_SPEC): Likewise.

	* configure.ac: Determine if the assembler supports the ISA 3.0
	instructions.
	* config.in (HAVE_AS_POWER9): Likewise.
	* configure: Regenerate.

	* doc/invoke.texi (RS/6000 and PowerPC Options): Document ISA 3.0
	switches.



git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230031 138bc75d-0d04-0410-961f-82ee72b054a4

15 files changed, 427 insertions, 26 deletions

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index ebd537cbcae..791180455b4 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,65 @@
+2015-11-09  Michael Meissner  <meissner@linux.vnet.ibm.com>
+
+	* config/rs6000/rs6000.opt (-mpower9-fusion): Add new switches for
+	ISA 3.0 (power9).
+	(-mpower9-vector): Likewise.
+	(-mpower9-dform): Likewise.
+	(-mpower9-minmax): Likewise.
+	(-mtoc-fusion): Likewise.
+	(-mmodulo): Likewise.
+	(-mfloat128-hardware): Likewise.
+
+	* config/rs6000/rs6000-cpus.def (ISA_3_0_MASKS_SERVER): Add option
+	mask for ISA 3.0 (power9).
+	(POWERPC_MASKS): Add new ISA 3.0 switches.
+	(power9 cpu): Add power9 cpu.
+
+	* config/rs6000/rs6000.h (ASM_CPU_POWER9_SPEC): Add support for
+	power9.
+	(ASM_CPU_SPEC): Likewise.
+	(EXTRA_SPECS): Likewise.
+
+	* config/rs6000/rs6000-opts.h (enum processor_type): Add
+	PROCESSOR_POWER9.
+
+	* config/rs6000/rs6000.c (power9_cost): Initial cost setup for
+	power9.
+	(rs6000_debug_reg_global): Add support for power9 fusion.
+	(rs6000_setup_reg_addr_masks): Cache mode size.
+	(rs6000_option_override_internal): Until real power9 tuning is
+	added, use -mtune=power8 for -mcpu=power9.
+	(rs6000_setup_reg_addr_masks): Do not allow pre-increment,
+	pre-decrement, or pre-modify on SFmode/DFmode if we allow the use
+	of Altivec registers.
+	(rs6000_option_override_internal): Add support for ISA 3.0
+	switches.
+	(rs6000_loop_align): Add support for power9 cpu.
+	(rs6000_file_start): Likewise.
+	(rs6000_adjust_cost): Likewise.
+	(rs6000_issue_rate): Likewise.
+	(insn_must_be_first_in_group): Likewise.
+	(insn_must_be_last_in_group): Likewise.
+	(force_new_group): Likewise.
+	(rs6000_register_move_cost): Likewise.
+	(rs6000_opt_masks): Likewise.
+
+	* config/rs6000/rs6000.md (cpu attribute): Add power9.
+	* config/rs6000/rs6000-tables.opt: Regenerate.
+
+	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define
+	_ARCH_PWR9 if power9 support is available.
+
+	* config/rs6000/aix61.h (ASM_CPU_SPEC): Add power9.
+	* config/rs6000/aix53.h (ASM_CPU_SPEC): Likewise.
+
+	* configure.ac: Determine if the assembler supports the ISA 3.0
+	instructions.
+	* config.in (HAVE_AS_POWER9): Likewise.
+	* configure: Regenerate.
+
+	* doc/invoke.texi (RS/6000 and PowerPC Options): Document ISA 3.0
+	switches.
+
 2015-11-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
 
 	* config/aarch64/aarch64.c (aarch64_simd_valid_immediate):
diff --git a/gcc/config.in b/gcc/config.in
index eb1ea106031..bb0d22053e9 100644
--- a/gcc/config.in
+++ b/gcc/config.in
@@ -556,6 +556,12 @@
 #endif
 
 
+/* Define if your assembler supports POWER9 instructions. */
+#ifndef USED_FOR_TARGET
+#undef HAVE_AS_POWER9
+#endif
+
+
 /* Define if your assembler supports .ref */
 #ifndef USED_FOR_TARGET
 #undef HAVE_AS_REF
diff --git a/gcc/config/rs6000/aix53.h b/gcc/config/rs6000/aix53.h
index b912e7b8589..d9aa3c20f75 100644
--- a/gcc/config/rs6000/aix53.h
+++ b/gcc/config/rs6000/aix53.h
@@ -63,6 +63,7 @@ do {									\
 %{mcpu=power6x: -mpwr6} \
 %{mcpu=power7: -mpwr7} \
 %{mcpu=power8: -mpwr8} \
+%{mcpu=power9: -mpwr9} \
 %{mcpu=powerpc: -mppc} \
 %{mcpu=rs64a: -mppc} \
 %{mcpu=603: -m603} \
diff --git a/gcc/config/rs6000/aix61.h b/gcc/config/rs6000/aix61.h
index 0e27057027f..46bdcf50035 100644
--- a/gcc/config/rs6000/aix61.h
+++ b/gcc/config/rs6000/aix61.h
@@ -80,6 +80,7 @@ do {									\
 %{mcpu=power6x: -mpwr6} \
 %{mcpu=power7: -mpwr7} \
 %{mcpu=power8: -mpwr8} \
+%{mcpu=power9: -mpwr9} \
 %{mcpu=powerpc: -mppc} \
 %{mcpu=rs64a: -mppc} \
 %{mcpu=603: -m603} \
diff --git a/gcc/config/rs6000/rs6000-c.c b/gcc/config/rs6000/rs6000-c.c
index 8f02edd1a63..a1b4fd4d17e 100644
--- a/gcc/config/rs6000/rs6000-c.c
+++ b/gcc/config/rs6000/rs6000-c.c
@@ -349,6 +349,8 @@ rs6000_target_modify_macros (bool define_p, HOST_WIDE_INT flags,
     rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR7");
   if ((flags & OPTION_MASK_DIRECT_MOVE) != 0)
     rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR8");
+  if ((flags & OPTION_MASK_MODULO) != 0)
+    rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR9");
   if ((flags & OPTION_MASK_SOFT_FLOAT) != 0)
     rs6000_define_or_undefine_macro (define_p, "_SOFT_FLOAT");
   if ((flags & OPTION_MASK_RECIP_PRECISION) != 0)
diff --git a/gcc/config/rs6000/rs6000-cpus.def b/gcc/config/rs6000/rs6000-cpus.def
index c63506bdf82..fc2b0f11353 100644
--- a/gcc/config/rs6000/rs6000-cpus.def
+++ b/gcc/config/rs6000/rs6000-cpus.def
@@ -60,6 +60,15 @@
   				 | OPTION_MASK_QUAD_MEMORY_ATOMIC	\
 				 | OPTION_MASK_UPPER_REGS_SF)
 
+/* Add ISEL back into ISA 3.0, since it is supposed to be a win.  Do not add
+   P9_DFORM or P9_MINMAX until they are fully debugged.  */
+#define ISA_3_0_MASKS_SERVER	(ISA_2_7_MASKS_SERVER			\
+				 | OPTION_MASK_FLOAT128_HW		\
+				 | OPTION_MASK_ISEL			\
+				 | OPTION_MASK_MODULO			\
+				 | OPTION_MASK_P9_FUSION		\
+				 | OPTION_MASK_P9_VECTOR)
+
 #define POWERPC_7400_MASK	(OPTION_MASK_PPC_GFXOPT | OPTION_MASK_ALTIVEC)
 
 /* Deal with ports that do not have -mstrict-align.  */
@@ -87,10 +96,15 @@
 				 | OPTION_MASK_ISEL			\
 				 | OPTION_MASK_MFCRF			\
 				 | OPTION_MASK_MFPGPR			\
+				 | OPTION_MASK_MODULO			\
 				 | OPTION_MASK_MULHW			\
 				 | OPTION_MASK_NO_UPDATE		\
 				 | OPTION_MASK_P8_FUSION		\
 				 | OPTION_MASK_P8_VECTOR		\
+				 | OPTION_MASK_P9_DFORM			\
+				 | OPTION_MASK_P9_FUSION		\
+				 | OPTION_MASK_P9_MINMAX		\
+				 | OPTION_MASK_P9_VECTOR		\
 				 | OPTION_MASK_POPCNTB			\
 				 | OPTION_MASK_POPCNTD			\
 				 | OPTION_MASK_POWERPC64		\
@@ -101,6 +115,7 @@
 				 | OPTION_MASK_RECIP_PRECISION		\
 				 | OPTION_MASK_SOFT_FLOAT		\
 				 | OPTION_MASK_STRICT_ALIGN_OPTIONAL	\
+				 | OPTION_MASK_TOC_FUSION		\
 				 | OPTION_MASK_UPPER_REGS_DF		\
 				 | OPTION_MASK_UPPER_REGS_SF		\
 				 | OPTION_MASK_VSX			\
@@ -195,6 +210,7 @@ RS6000_CPU ("power7", PROCESSOR_POWER7,   /* Don't add MASK_ISEL by default */
 	    | MASK_POPCNTB | MASK_FPRND | MASK_CMPB | MASK_DFP | MASK_POPCNTD
 	    | MASK_VSX | MASK_RECIP_PRECISION | OPTION_MASK_UPPER_REGS_DF)
 RS6000_CPU ("power8", PROCESSOR_POWER8, MASK_POWERPC64 | ISA_2_7_MASKS_SERVER)
+RS6000_CPU ("power9", PROCESSOR_POWER9, MASK_POWERPC64 | ISA_3_0_MASKS_SERVER)
 RS6000_CPU ("powerpc", PROCESSOR_POWERPC, 0)
 RS6000_CPU ("powerpc64", PROCESSOR_POWERPC64, MASK_PPC_GFXOPT | MASK_POWERPC64)
 RS6000_CPU ("powerpc64le", PROCESSOR_POWER8, MASK_POWERPC64 | ISA_2_7_MASKS_SERVER)
diff --git a/gcc/config/rs6000/rs6000-opts.h b/gcc/config/rs6000/rs6000-opts.h
index 2a028eaae8f..012c0db42fc 100644
--- a/gcc/config/rs6000/rs6000-opts.h
+++ b/gcc/config/rs6000/rs6000-opts.h
@@ -60,6 +60,7 @@ enum processor_type
    PROCESSOR_POWER6,
    PROCESSOR_POWER7,
    PROCESSOR_POWER8,
+   PROCESSOR_POWER9,
 
    PROCESSOR_RS64A,
    PROCESSOR_MPCCORE,
diff --git a/gcc/config/rs6000/rs6000-tables.opt b/gcc/config/rs6000/rs6000-tables.opt
index e4b41e148bc..2529ff1ca91 100644
--- a/gcc/config/rs6000/rs6000-tables.opt
+++ b/gcc/config/rs6000/rs6000-tables.opt
@@ -180,14 +180,17 @@ EnumValue
 Enum(rs6000_cpu_opt_value) String(power8) Value(50)
 
 EnumValue
-Enum(rs6000_cpu_opt_value) String(powerpc) Value(51)
+Enum(rs6000_cpu_opt_value) String(power9) Value(51)
 
 EnumValue
-Enum(rs6000_cpu_opt_value) String(powerpc64) Value(52)
+Enum(rs6000_cpu_opt_value) String(powerpc) Value(52)
 
 EnumValue
-Enum(rs6000_cpu_opt_value) String(powerpc64le) Value(53)
+Enum(rs6000_cpu_opt_value) String(powerpc64) Value(53)
 
 EnumValue
-Enum(rs6000_cpu_opt_value) String(rs64) Value(54)
+Enum(rs6000_cpu_opt_value) String(powerpc64le) Value(54)
+
+EnumValue
+Enum(rs6000_cpu_opt_value) String(rs64) Value(55)
 
diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index 13d0193ea55..2adf79b1315 100644
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -985,6 +985,26 @@ struct processor_costs power8_cost = {
   COSTS_N_INSNS (3),	/* SF->DF convert */
 };
 
+/* Instruction costs on POWER9 processors.  */
+static const
+struct processor_costs power9_cost = {
+  COSTS_N_INSNS (3),	/* mulsi */
+  COSTS_N_INSNS (3),	/* mulsi_const */
+  COSTS_N_INSNS (3),	/* mulsi_const9 */
+  COSTS_N_INSNS (3),	/* muldi */
+  COSTS_N_INSNS (19),	/* divsi */
+  COSTS_N_INSNS (35),	/* divdi */
+  COSTS_N_INSNS (3),	/* fp */
+  COSTS_N_INSNS (3),	/* dmul */
+  COSTS_N_INSNS (14),	/* sdiv */
+  COSTS_N_INSNS (17),	/* ddiv */
+  128,			/* cache line size */
+  32,			/* l1 cache */
+  256,			/* l2 cache */
+  12,			/* prefetch streams */
+  COSTS_N_INSNS (3),	/* SF->DF convert */
+};
+
 /* Instruction costs on POWER A2 processors.  */
 static const
 struct processor_costs ppca2_cost = {
@@ -2423,8 +2443,18 @@ rs6000_debug_reg_global (void)
     fprintf (stderr, DEBUG_FMT_S, "lra", "true");
 
   if (TARGET_P8_FUSION)
-    fprintf (stderr, DEBUG_FMT_S, "p8 fusion",
-	     (TARGET_P8_FUSION_SIGN) ? "zero+sign" : "zero");
+    {
+      char options[80];
+
+      strcpy (options, (TARGET_P9_FUSION) ? "power9" : "power8");
+      if (TARGET_TOC_FUSION)
+	strcat (options, ", toc");
+
+      if (TARGET_P8_FUSION_SIGN)
+	strcat (options, ", sign");
+
+      fprintf (stderr, DEBUG_FMT_S, "fusion", options);
+    }
 
   fprintf (stderr, DEBUG_FMT_S, "plt-format",
 	   TARGET_SECURE_PLT ? "secure" : "bss");
@@ -2463,6 +2493,7 @@ rs6000_setup_reg_addr_masks (void)
   for (m = 0; m < NUM_MACHINE_MODES; ++m)
     {
       machine_mode m2 = (machine_mode)m;
+      unsigned short msize = GET_MODE_SIZE (m2);
 
       /* SDmode is special in that we want to access it only via REG+REG
 	 addressing on power7 and above, since we want to use the LFIWZX and
@@ -2492,16 +2523,18 @@ rs6000_setup_reg_addr_masks (void)
 	      /* Figure out if we can do PRE_INC, PRE_DEC, or PRE_MODIFY
 		 addressing.  Restrict addressing on SPE for 64-bit types
 		 because of the SUBREG hackery used to address 64-bit floats in
-		 '32-bit' GPRs.  */
+		 '32-bit' GPRs.  If we allow scalars into Altivec registers,
+		 don't allow PRE_INC, PRE_DEC, or PRE_MODIFY.  */
 
 	      if (TARGET_UPDATE
 		  && (rc == RELOAD_REG_GPR || rc == RELOAD_REG_FPR)
-		  && GET_MODE_SIZE (m2) <= 8
+		  && msize <= 8
 		  && !VECTOR_MODE_P (m2)
 		  && !FLOAT128_VECTOR_P (m2)
 		  && !COMPLEX_MODE_P (m2)
-		  && !indexed_only_p
-		  && !(TARGET_E500_DOUBLE && GET_MODE_SIZE (m2) == 8))
+		  && (m2 != DFmode || !TARGET_UPPER_REGS_DF)
+		  && (m2 != SFmode || !TARGET_UPPER_REGS_SF)
+		  && !(TARGET_E500_DOUBLE && msize == 8))
 		{
 		  addr_mask |= RELOAD_REG_PRE_INCDEC;
 
@@ -2536,7 +2569,7 @@ rs6000_setup_reg_addr_masks (void)
 
 	  /* VMX registers can do (REG & -16) and ((REG+REG) & -16)
 	     addressing on 128-bit types.  */
-	  if (rc == RELOAD_REG_VMX && GET_MODE_SIZE (m2) == 16
+	  if (rc == RELOAD_REG_VMX && msize == 16
 	      && (addr_mask & RELOAD_REG_VALID) != 0)
 	    addr_mask |= RELOAD_REG_AND_M16;
 
@@ -3382,7 +3415,22 @@ rs6000_option_override_internal (bool global_init_p)
   if (rs6000_tune_index >= 0)
     tune_index = rs6000_tune_index;
   else if (have_cpu)
-    rs6000_tune_index = tune_index = cpu_index;
+    {
+      /* Until power9 tuning is available, use power8 tuning if -mcpu=power9.  */
+      if (processor_target_table[cpu_index].processor != PROCESSOR_POWER9)
+	rs6000_tune_index = tune_index = cpu_index;
+      else
+	{
+	  size_t i;
+	  tune_index = -1;
+	  for (i = 0; i < ARRAY_SIZE (processor_target_table); i++)
+	    if (processor_target_table[i].processor == PROCESSOR_POWER8)
+	      {
+		rs6000_tune_index = tune_index = i;
+		break;
+	      }
+	}
+    }
   else
     {
       size_t i;
@@ -3557,7 +3605,9 @@ rs6000_option_override_internal (bool global_init_p)
 
   /* For the newer switches (vsx, dfp, etc.) set some of the older options,
      unless the user explicitly used the -mno-<option> to disable the code.  */
-  if (TARGET_P8_VECTOR || TARGET_DIRECT_MOVE || TARGET_CRYPTO)
+  if (TARGET_P9_VECTOR || TARGET_MODULO || TARGET_P9_DFORM || TARGET_P9_MINMAX)
+    rs6000_isa_flags |= (ISA_3_0_MASKS_SERVER & ~rs6000_isa_flags_explicit);
+  else if (TARGET_P8_VECTOR || TARGET_DIRECT_MOVE || TARGET_CRYPTO)
     rs6000_isa_flags |= (ISA_2_7_MASKS_SERVER & ~rs6000_isa_flags_explicit);
   else if (TARGET_VSX)
     rs6000_isa_flags |= (ISA_2_6_MASKS_SERVER & ~rs6000_isa_flags_explicit);
@@ -3703,6 +3753,41 @@ rs6000_option_override_internal (bool global_init_p)
     rs6000_isa_flags |= (processor_target_table[tune_index].target_enable
 			 & OPTION_MASK_P8_FUSION);
 
+  /* Setting additional fusion flags turns on base fusion.  */
+  if (!TARGET_P8_FUSION && (TARGET_P8_FUSION_SIGN || TARGET_TOC_FUSION))
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_P8_FUSION)
+	{
+	  if (TARGET_P8_FUSION_SIGN)
+	    error ("-mpower8-fusion-sign requires -mpower8-fusion");
+
+	  if (TARGET_TOC_FUSION)
+	    error ("-mtoc-fusion requires -mpower8-fusion");
+
+	  rs6000_isa_flags &= ~OPTION_MASK_P8_FUSION;
+	}
+      else
+	rs6000_isa_flags |= OPTION_MASK_P8_FUSION;
+    }
+
+  /* Power9 fusion is a superset over power8 fusion.  */
+  if (TARGET_P9_FUSION && !TARGET_P8_FUSION)
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_P8_FUSION)
+	{
+	  error ("-mpower9-fusion requires -mpower8-fusion");
+	  rs6000_isa_flags &= ~OPTION_MASK_P9_FUSION;
+	}
+      else
+	rs6000_isa_flags |= OPTION_MASK_P8_FUSION;
+    }
+
+  /* Enable power9 fusion if we are tuning for power9, even if we aren't
+     generating power9 instructions.  */
+  if (!(rs6000_isa_flags_explicit & OPTION_MASK_P9_FUSION))
+    rs6000_isa_flags |= (processor_target_table[tune_index].target_enable
+			 & OPTION_MASK_P9_FUSION);
+
   /* Power8 does not fuse sign extended loads with the addis.  If we are
      optimizing at high levels for speed, convert a sign extended load into a
      zero extending load, and an explicit sign extension.  */
@@ -3712,6 +3797,58 @@ rs6000_option_override_internal (bool global_init_p)
       && optimize >= 3)
     rs6000_isa_flags |= OPTION_MASK_P8_FUSION_SIGN;
 
+  /* TOC fusion requires 64-bit and medium/large code model.  */
+  if (TARGET_TOC_FUSION && !TARGET_POWERPC64)
+    {
+      rs6000_isa_flags &= ~OPTION_MASK_TOC_FUSION;
+      if ((rs6000_isa_flags_explicit & OPTION_MASK_TOC_FUSION) != 0)
+	warning (0, N_("-mtoc-fusion requires 64-bit"));
+    }
+
+  if (TARGET_TOC_FUSION && (TARGET_CMODEL == CMODEL_SMALL))
+    {
+      rs6000_isa_flags &= ~OPTION_MASK_TOC_FUSION;
+      if ((rs6000_isa_flags_explicit & OPTION_MASK_TOC_FUSION) != 0)
+	warning (0, N_("-mtoc-fusion requires medium/large code model"));
+    }
+
+  /* Turn on -mtoc-fusion by default if p8-fusion and 64-bit medium/large code
+     model.  */
+  if (TARGET_P8_FUSION && !TARGET_TOC_FUSION && TARGET_POWERPC64
+      && (TARGET_CMODEL != CMODEL_SMALL)
+      && !(rs6000_isa_flags_explicit & OPTION_MASK_TOC_FUSION))
+    rs6000_isa_flags |= OPTION_MASK_TOC_FUSION;
+
+  /* ISA 3.0 D-form instructions require p9-vector and upper-regs.  */
+  if (TARGET_P9_DFORM && !TARGET_P9_VECTOR)
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_P9_VECTOR)
+	error ("-mpower9-dform requires -mpower9-vector");
+      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+    }
+
+  if (TARGET_P9_DFORM && !TARGET_UPPER_REGS_DF)
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_UPPER_REGS_DF)
+	error ("-mpower9-dform requires -mupper-regs-df");
+      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+    }
+
+  if (TARGET_P9_DFORM && !TARGET_UPPER_REGS_SF)
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_UPPER_REGS_SF)
+	error ("-mpower9-dform requires -mupper-regs-sf");
+      rs6000_isa_flags &= ~OPTION_MASK_P9_DFORM;
+    }
+
+  /* ISA 3.0 vector instructions include ISA 2.07.  */
+  if (TARGET_P9_VECTOR && !TARGET_P8_VECTOR)
+    {
+      if (rs6000_isa_flags_explicit & OPTION_MASK_P8_VECTOR)
+	error ("-mpower9-vector requires -mpower8-vector");
+      rs6000_isa_flags &= ~OPTION_MASK_P9_VECTOR;
+    }
+
   /* Set -mallow-movmisalign to explicitly on if we have full ISA 2.07
      support. If we only have ISA 2.06 support, and the user did not specify
      the switch, leave it set to -1 so the movmisalign patterns are enabled,
@@ -3757,9 +3894,32 @@ rs6000_option_override_internal (bool global_init_p)
       if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128) != 0)
 	error ("-mfloat128 requires VSX support");
 
-      rs6000_isa_flags &= ~OPTION_MASK_FLOAT128;
+      rs6000_isa_flags &= ~(OPTION_MASK_FLOAT128 | OPTION_MASK_FLOAT128_HW);
+    }
+
+  /* IEEE 128-bit floating point hardware instructions imply enabling
+     __float128.  */
+  if (TARGET_FLOAT128_HW
+      && (rs6000_isa_flags & (OPTION_MASK_P9_VECTOR
+			      | OPTION_MASK_DIRECT_MOVE
+			      | OPTION_MASK_UPPER_REGS_DF
+			      | OPTION_MASK_UPPER_REGS_SF)) == 0)
+    {
+      if ((rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_HW) != 0)
+	error ("-mfloat128-hardware requires full ISA 3.0 support");
+
+      rs6000_isa_flags &= ~OPTION_MASK_FLOAT128_HW;
     }
 
+  else if (TARGET_P9_VECTOR && !TARGET_FLOAT128_HW
+	   && (rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128_HW) == 0)
+    rs6000_isa_flags |= OPTION_MASK_FLOAT128_HW;
+
+  if (TARGET_FLOAT128_HW
+      && (rs6000_isa_flags_explicit & OPTION_MASK_FLOAT128) == 0)
+    rs6000_isa_flags |= OPTION_MASK_FLOAT128;
+
+  /* Print the options after updating the defaults.  */
   if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
     rs6000_print_isa_options (stderr, 0, "after defaults", rs6000_isa_flags);
 
@@ -3957,18 +4117,21 @@ rs6000_option_override_internal (bool global_init_p)
 			&& rs6000_cpu != PROCESSOR_POWER6
 			&& rs6000_cpu != PROCESSOR_POWER7
 			&& rs6000_cpu != PROCESSOR_POWER8
+			&& rs6000_cpu != PROCESSOR_POWER9
 			&& rs6000_cpu != PROCESSOR_PPCA2
 			&& rs6000_cpu != PROCESSOR_CELL
 			&& rs6000_cpu != PROCESSOR_PPC476);
   rs6000_sched_groups = (rs6000_cpu == PROCESSOR_POWER4
 			 || rs6000_cpu == PROCESSOR_POWER5
 			 || rs6000_cpu == PROCESSOR_POWER7
-			 || rs6000_cpu == PROCESSOR_POWER8);
+			 || rs6000_cpu == PROCESSOR_POWER8
+			 || rs6000_cpu == PROCESSOR_POWER9);
   rs6000_align_branch_targets = (rs6000_cpu == PROCESSOR_POWER4
 				 || rs6000_cpu == PROCESSOR_POWER5
 				 || rs6000_cpu == PROCESSOR_POWER6
 				 || rs6000_cpu == PROCESSOR_POWER7
 				 || rs6000_cpu == PROCESSOR_POWER8
+				 || rs6000_cpu == PROCESSOR_POWER9
 				 || rs6000_cpu == PROCESSOR_PPCE500MC
 				 || rs6000_cpu == PROCESSOR_PPCE500MC64
 				 || rs6000_cpu == PROCESSOR_PPCE5500
@@ -4216,6 +4379,10 @@ rs6000_option_override_internal (bool global_init_p)
 	rs6000_cost = &power8_cost;
 	break;
 
+      case PROCESSOR_POWER9:
+	rs6000_cost = &power9_cost;
+	break;
+
       case PROCESSOR_PPCA2:
 	rs6000_cost = &ppca2_cost;
 	break;
@@ -4396,7 +4563,8 @@ rs6000_loop_align (rtx label)
 	  || rs6000_cpu == PROCESSOR_POWER5
 	  || rs6000_cpu == PROCESSOR_POWER6
 	  || rs6000_cpu == PROCESSOR_POWER7
-	  || rs6000_cpu == PROCESSOR_POWER8))
+	  || rs6000_cpu == PROCESSOR_POWER8
+	  || rs6000_cpu == PROCESSOR_POWER9))
     return 5;
   else
     return align_loops_log;
@@ -5213,7 +5381,9 @@ rs6000_file_start (void)
       || !global_options_set.x_rs6000_cpu_index)
     {
       fputs ("\t.machine ", asm_out_file);
-      if ((rs6000_isa_flags & OPTION_MASK_DIRECT_MOVE) != 0)
+      if ((rs6000_isa_flags & OPTION_MASK_MODULO) != 0)
+	fputs ("power9\n", asm_out_file);
+      else if ((rs6000_isa_flags & OPTION_MASK_DIRECT_MOVE) != 0)
 	fputs ("power8\n", asm_out_file);
       else if ((rs6000_isa_flags & OPTION_MASK_POPCNTD) != 0)
 	fputs ("power7\n", asm_out_file);
@@ -28013,6 +28183,7 @@ rs6000_adjust_cost (rtx_insn *insn, rtx link, rtx_insn *dep_insn, int cost)
                  || rs6000_cpu_attr == CPU_POWER5
 		 || rs6000_cpu_attr == CPU_POWER7
 		 || rs6000_cpu_attr == CPU_POWER8
+		 || rs6000_cpu_attr == CPU_POWER9
                  || rs6000_cpu_attr == CPU_CELL)
                 && recog_memoized (dep_insn)
                 && (INSN_CODE (dep_insn) >= 0))
@@ -28585,6 +28756,7 @@ rs6000_issue_rate (void)
   case CPU_POWER7:
     return 5;
   case CPU_POWER8:
+  case CPU_POWER9:
     return 7;
   default:
     return 1;
@@ -29218,6 +29390,7 @@ insn_must_be_first_in_group (rtx_insn *insn)
         }
       break;
     case PROCESSOR_POWER8:
+    case PROCESSOR_POWER9:
       type = get_attr_type (insn);
 
       switch (type)
@@ -29348,6 +29521,7 @@ insn_must_be_last_in_group (rtx_insn *insn)
     }
     break;
   case PROCESSOR_POWER8:
+  case PROCESSOR_POWER9:
     type = get_attr_type (insn);
 
     switch (type)
@@ -29466,7 +29640,7 @@ force_new_group (int sched_verbose, FILE *dump, rtx *group_insns,
 
       /* Do we have a special group ending nop? */
       if (rs6000_cpu_attr == CPU_POWER6 || rs6000_cpu_attr == CPU_POWER7
-	  || rs6000_cpu_attr == CPU_POWER8)
+	  || rs6000_cpu_attr == CPU_POWER8 || rs6000_cpu_attr == CPU_POWER9)
 	{
 	  nop = gen_group_ending_nop ();
 	  emit_insn_before (nop, next_insn);
@@ -31966,7 +32140,8 @@ rs6000_register_move_cost (machine_mode mode,
          expensive than memory in order to bias spills to memory .*/
       else if ((rs6000_cpu == PROCESSOR_POWER6
 		|| rs6000_cpu == PROCESSOR_POWER7
-		|| rs6000_cpu == PROCESSOR_POWER8)
+		|| rs6000_cpu == PROCESSOR_POWER8
+		|| rs6000_cpu == PROCESSOR_POWER9)
 	       && reg_classes_intersect_p (rclass, LINK_OR_CTR_REGS))
         ret = 6 * hard_regno_nregs[0][mode];
 
@@ -33496,12 +33671,14 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
   { "efficient-unaligned-vsx",	OPTION_MASK_EFFICIENT_UNALIGNED_VSX,
 								false, true  },
   { "float128",			OPTION_MASK_FLOAT128,		false, true  },
+  { "float128-hardware",	OPTION_MASK_FLOAT128_HW,	false, true  },
   { "fprnd",			OPTION_MASK_FPRND,		false, true  },
   { "hard-dfp",			OPTION_MASK_DFP,		false, true  },
   { "htm",			OPTION_MASK_HTM,		false, true  },
   { "isel",			OPTION_MASK_ISEL,		false, true  },
   { "mfcrf",			OPTION_MASK_MFCRF,		false, true  },
   { "mfpgpr",			OPTION_MASK_MFPGPR,		false, true  },
+  { "modulo",			OPTION_MASK_MODULO,		false, true  },
   { "mulhw",			OPTION_MASK_MULHW,		false, true  },
   { "multiple",			OPTION_MASK_MULTIPLE,		false, true  },
   { "popcntb",			OPTION_MASK_POPCNTB,		false, true  },
@@ -33509,6 +33686,10 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
   { "power8-fusion",		OPTION_MASK_P8_FUSION,		false, true  },
   { "power8-fusion-sign",	OPTION_MASK_P8_FUSION_SIGN,	false, true  },
   { "power8-vector",		OPTION_MASK_P8_VECTOR,		false, true  },
+  { "power9-dform",		OPTION_MASK_P9_DFORM,		false, true  },
+  { "power9-fusion",		OPTION_MASK_P9_FUSION,		false, true  },
+  { "power9-minmax",		OPTION_MASK_P9_MINMAX,		false, true  },
+  { "power9-vector",		OPTION_MASK_P9_VECTOR,		false, true  },
   { "powerpc-gfxopt",		OPTION_MASK_PPC_GFXOPT,		false, true  },
   { "powerpc-gpopt",		OPTION_MASK_PPC_GPOPT,		false, true  },
   { "quad-memory",		OPTION_MASK_QUAD_MEMORY,	false, true  },
@@ -33516,6 +33697,7 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
   { "recip-precision",		OPTION_MASK_RECIP_PRECISION,	false, true  },
   { "save-toc-indirect",	OPTION_MASK_SAVE_TOC_INDIRECT,	false, true  },
   { "string",			OPTION_MASK_STRING,		false, true  },
+  { "toc-fusion",		OPTION_MASK_TOC_FUSION,		false, true  },
   { "update",			OPTION_MASK_NO_UPDATE,		true , true  },
   { "upper-regs-df",		OPTION_MASK_UPPER_REGS_DF,	false, true  },
   { "upper-regs-sf",		OPTION_MASK_UPPER_REGS_SF,	false, true  },
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index 02da097227b..223ba699ce5 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -95,6 +95,12 @@
 #define ASM_CPU_POWER8_SPEC ASM_CPU_POWER7_SPEC
 #endif
 
+#ifdef HAVE_AS_POWER9
+#define ASM_CPU_POWER9_SPEC "-mpower9"
+#else
+#define ASM_CPU_POWER9_SPEC ASM_CPU_POWER8_SPEC
+#endif
+
 #ifdef HAVE_AS_DCI
 #define ASM_CPU_476_SPEC "-m476"
 #else
@@ -119,6 +125,7 @@
 %{mcpu=power6x: %(asm_cpu_power6) -maltivec} \
 %{mcpu=power7: %(asm_cpu_power7)} \
 %{mcpu=power8: %(asm_cpu_power8)} \
+%{mcpu=power9: %(asm_cpu_power9)} \
 %{mcpu=a2: -ma2} \
 %{mcpu=powerpc: -mppc} \
 %{mcpu=rs64a: -mppc64} \
@@ -193,6 +200,7 @@
   { "asm_cpu_power6",		ASM_CPU_POWER6_SPEC },			\
   { "asm_cpu_power7",		ASM_CPU_POWER7_SPEC },			\
   { "asm_cpu_power8",		ASM_CPU_POWER8_SPEC },			\
+  { "asm_cpu_power9",		ASM_CPU_POWER9_SPEC },			\
   { "asm_cpu_476",		ASM_CPU_476_SPEC },			\
   SUBTARGET_EXTRA_SPECS
 
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index eeeef342228..79e0271ff3c 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -252,7 +252,7 @@
    ppc750,ppc7400,ppc7450,
    ppc403,ppc405,ppc440,ppc476,
    ppc8540,ppc8548,ppce300c2,ppce300c3,ppce500mc,ppce500mc64,ppce5500,ppce6500,
-   power4,power5,power6,power7,power8,
+   power4,power5,power6,power7,power8,power9,
    rs64a,mpccore,cell,ppca2,titan"
   (const (symbol_ref "rs6000_cpu_attr")))
 
diff --git a/gcc/config/rs6000/rs6000.opt b/gcc/config/rs6000/rs6000.opt
index b9e4b7dfdb6..61e3c8a323e 100644
--- a/gcc/config/rs6000/rs6000.opt
+++ b/gcc/config/rs6000/rs6000.opt
@@ -601,6 +601,34 @@ moptimize-swaps
 Target Undocumented Var(rs6000_optimize_swaps) Init(1) Save
 Analyze and remove doubleword swaps from VSX computations.
 
+mpower9-fusion
+Target Report Mask(P9_FUSION) Var(rs6000_isa_flags)
+Fuse certain operations together for better performance on power9.
+
+mpower9-vector
+Target Report Mask(P9_VECTOR) Var(rs6000_isa_flags)
+Use/do not use vector and scalar instructions added in ISA 3.0.
+
+mpower9-dform
+Target Undocumented Mask(P9_DFORM) Var(rs6000_isa_flags)
+Use/do not use vector and scalar instructions added in ISA 3.0.
+
+mpower9-minmax
+Target Undocumented Mask(P9_MINMAX) Var(rs6000_isa_flags)
+Use/do not use the new min/max instructions defined in ISA 3.0.
+
+mtoc-fusion
+Target Undocumented Mask(TOC_FUSION) Var(rs6000_isa_flags)
+Fuse medium/large code model toc references with the memory instruction.
+
+mmodulo
+Target Report Mask(MODULO) Var(rs6000_isa_flags)
+Generate the integer modulo instructions.
+
 mfloat128
 Target Report Mask(FLOAT128) Var(rs6000_isa_flags)
 Enable/disable IEEE 128-bit floating point via the __float128 keyword.
+
+mfloat128-hardware
+Target Report Mask(FLOAT128_HW) Var(rs6000_isa_flags)
+Enable/disable using IEEE 128-bit floating point instructions.
diff --git a/gcc/configure b/gcc/configure
index de6cf13569f..0cd85fb8646 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -26333,6 +26333,48 @@ $as_echo "#define HAVE_AS_POWER8 1" >>confdefs.h
 fi
 
     case $target in
+      *-*-aix*) conftest_s='	.machine "pwr9"
+	.csect .text[PR]';;
+      *) conftest_s='	.machine power9
+	.text';;
+    esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for power9 support" >&5
+$as_echo_n "checking assembler for power9 support... " >&6; }
+if test "${gcc_cv_as_powerpc_power9+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  gcc_cv_as_powerpc_power9=no
+    if test $in_tree_gas = yes; then
+    if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 19 \) \* 1000 + 2`
+  then gcc_cv_as_powerpc_power9=yes
+fi
+  elif test x$gcc_cv_as != x; then
+    $as_echo "$conftest_s" > conftest.s
+    if { ac_try='$gcc_cv_as $gcc_cv_as_flags -a32 -o conftest.o conftest.s >&5'
+  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }
+    then
+	gcc_cv_as_powerpc_power9=yes
+    else
+      echo "configure: failed program was" >&5
+      cat conftest.s >&5
+    fi
+    rm -f conftest.o conftest.s
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_powerpc_power9" >&5
+$as_echo "$gcc_cv_as_powerpc_power9" >&6; }
+if test $gcc_cv_as_powerpc_power9 = yes; then
+
+$as_echo "#define HAVE_AS_POWER9 1" >>confdefs.h
+
+fi
+
+    case $target in
       *-*-aix*) conftest_s='	.csect .text[PR]
 	lwsync';;
       *) conftest_s='	.text
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 7670824e5a4..ed2e665b40c 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -4316,6 +4316,19 @@ LCF0:
 	  [Define if your assembler supports POWER8 instructions.])])
 
     case $target in
+      *-*-aix*) conftest_s='	.machine "pwr9"
+	.csect .text[[PR]]';;
+      *) conftest_s='	.machine power9
+	.text';;
+    esac
+
+    gcc_GAS_CHECK_FEATURE([power9 support],
+      gcc_cv_as_powerpc_power9, [2,19,2], -a32,
+      [$conftest_s],,
+      [AC_DEFINE(HAVE_AS_POWER9, 1,
+	  [Define if your assembler supports POWER9 instructions.])])
+
+    case $target in
       *-*-aix*) conftest_s='	.csect .text[[PR]]
 	lwsync';;
       *) conftest_s='	.text
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index dc9a4e73712..2198db0c13e 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -949,8 +949,9 @@ See RS/6000 and PowerPC Options.
 -mquad-memory-atomic -mno-quad-memory-atomic @gol
 -mcompat-align-parm -mno-compat-align-parm @gol
 -mupper-regs-df -mno-upper-regs-df -mupper-regs-sf -mno-upper-regs-sf @gol
--mupper-regs -mno-upper-regs @gol
--mfloat128 -mno-float128}
+-mupper-regs -mno-upper-regs -mmodulo -mno-modulo @gol
+-mfloat128 -mno-float128 -mfloat128-hardware -mno-float128-hardware @gol
+-mpower9-fusion -mno-mpower9-fusion -mpower9-vector -mno-power9-vector}
 
 @emph{RX Options}
 @gccoptlist{-m64bit-doubles  -m32bit-doubles  -fpu  -nofpu@gol
@@ -19311,8 +19312,9 @@ Supported values for @var{cpu_type} are @samp{401}, @samp{403},
 @samp{e300c3}, @samp{e500mc}, @samp{e500mc64}, @samp{e5500},
 @samp{e6500}, @samp{ec603e}, @samp{G3}, @samp{G4}, @samp{G5},
 @samp{titan}, @samp{power3}, @samp{power4}, @samp{power5}, @samp{power5+},
-@samp{power6}, @samp{power6x}, @samp{power7}, @samp{power8}, @samp{powerpc},
-@samp{powerpc64}, @samp{powerpc64le}, and @samp{rs64}.
+@samp{power6}, @samp{power6x}, @samp{power7}, @samp{power8},
+@samp{power9}, @samp{powerpc}, @samp{powerpc64}, @samp{powerpc64le},
+and @samp{rs64}.
 
 @option{-mcpu=powerpc}, @option{-mcpu=powerpc64}, and
 @option{-mcpu=powerpc64le} specify pure 32-bit PowerPC (either
@@ -19332,7 +19334,8 @@ following options:
 -mpowerpc-gpopt  -mpowerpc-gfxopt  -msingle-float -mdouble-float @gol
 -msimple-fpu -mstring  -mmulhw  -mdlmzb  -mmfpgpr -mvsx @gol
 -mcrypto -mdirect-move -mpower8-fusion -mpower8-vector @gol
--mquad-memory -mquad-memory-atomic}
+-mquad-memory -mquad-memory-atomic -mmodulo -mfloat128 -mfloat128-hardware @gol
+-mpower9-fusion -mpower9-vector}
 
 The particular options set for any particular CPU varies between
 compiler versions, depending on what setting seems to produce optimal
@@ -19569,12 +19572,45 @@ If the @option{-mno-upper-regs} option is used, it turns off both
 @opindex mfloat128
 @opindex mno-float128
 Enable/disable the @var{__float128} keyword for IEEE 128-bit floating point
-and use software emulation for IEEE 128-bit floating point.
+and use either software emulation for IEEE 128-bit floating point or
+hardware instructions.
 
 The VSX instruction set (@option{-mvsx}, @option{-mcpu=power7}, or
 @option{-mcpu=power8}) must be enabled to use the @option{-mfloat128}
 option.
 
+@item -mfloat128-hardware
+@itemx -mno-float128-hardware
+@opindex mfloat128-hardware
+@opindex mno-float128-hardware
+Enable/disable using ISA 3.0 hardware instructions to support the
+@var{__float128} data type.
+
+@item -mmodulo
+@itemx -mno-modulo
+@opindex mmodulo
+@opindex mno-module
+Generate code that uses (does not use) the ISA 3.0 integer modulo
+instructions.  The @option{-mmodulo} option is enabled by default
+with the @option{-mcpu=power9} option.
+
+@item -mpower9-fusion
+@itemx -mno-power9-fusion
+@opindex mpower9-fusion
+@opindex mno-power9-fusion
+Generate code that keeps (does not keeps) some operations adjacent so
+that the instructions can be fused together on power9 and later
+processors.
+
+@item -mpower9-vector
+@itemx -mno-power9-vector
+@opindex mpower9-vector
+@opindex mno-power9-vector
+Generate code that uses (does not use) the vector and scalar
+instructions that were added in version 2.07 of the PowerPC ISA.  Also
+enable the use of built-in functions that allow more direct access to
+the vector instructions.
+
 @item -mfloat-gprs=@var{yes/single/double/no}
 @itemx -mfloat-gprs
 @opindex mfloat-gprs