diff options
Diffstat (limited to 'gcc/ChangeLog')
| -rw-r--r-- | gcc/ChangeLog | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/gcc/ChangeLog b/gcc/ChangeLog index e42b63a675b..a63667af04c 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,215 @@ +2001-04-03 Jakub Jelinek <jakub@redhat.com> + David S. Miller <davem@pierdol.cobaltmicro.com> + Andrew MacLeod <amacleod@redhat.com> + + Use byte offsets in SUBREGs instead of words. + + * alias.c (nonlocal_mentioned_p): Use subreg_regno function. + * caller-save.c (mark_set_regs): Change callers of subreg_hard_regno + to pass new argument. + (add_stored_regs): Use subreg_regno_offset function. + * calls.c (expand_call): For non-paradoxical SUBREG take endianess + into account. + (precompute_arguments): Use gen_lowpart_SUBREG. + * combine.c (try_combine): Replace explicit XEXP with SUBREG_REG. + (combine_simplify_rtx): Rework to use SUBREG_BYTE. + (simplify_set): Rework to use SUBREG_BYTE. + (expand_field_assignment): Use SUBREG_BYTE. + (make_extraction): Use SUBREG_BYTE. + (if_then_else_cond): Use SUBREG_BYTE. + (apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments. + (gen_lowpart_for_combine): Compute full byte offset. + * cse.c (mention_regs): Use SUBREG_BYTE. + (remove_invalid_subreg_refs): Rework to use SUBREG_BYTE. + (canon_hash): Use SUBREG_BYTE. + (fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword. + (gen_lowpart_if_possible): Formatting. + * dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos + correctly. + * dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG + (mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG + (loc_descriptor): Fixup explicit XEXP into SUBREG_REG + * dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG + (output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG + (output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG + * emit-rtl.c (gen_rtx_SUBREG): New function, used to verify + certain invariants about SUBREGs the compiler creates. + (gen_lowpart_SUBREG): New function. + (subreg_hard_regno): New function to get the final register number. + (gen_lowpart_common): Use SUBREG_BYTE. + (gen_imagpart): Spacing nits. + (subreg_realpart_p): Use SUBREG_BYTE. + (gen_highpart): Use SUBREG_BYTE. + (subreg_lowpart_p): Always compute endian corrected goal offset, + even at the byte level, then compare against that. + (constant_subword): New function, pulled out all constant cases + from operand_subword and changed second argument name to offset. + (operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early + and call constant_subword to do the work. Return const0_rtx if + looking for a word outside of OP. + (operand_subword_force): Change second arg name to offset. + * expmed.c (store_bit_field): Use SUBREG_BYTE. + (store_split_bit_field): Use SUBREG_BYTE. + (extract_bit_field): Use SUBREG_BYTE. + (extract_split_bit_field): Use SUBREG_BYTE. + (expand_shift): Use SUBREG_BYTE. + * expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG. + * final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE. + * flow.c (set_noop_p): Use SUBREG_BYTE. + (mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead. + * function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG. + (fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian + correction code. + (optimize_bit_field): Use SUBREG_BYTE. + (purge_addressof_1): Use SUBREG_BYTE. + (purge_single_hard_subreg_set): Use subreg_regno_offset function. + (assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are + actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true. + * gengenrtl.c (special_rtx): Add SUBREG. + * global.c (mark_reg_store): Use SUBREG_BYTE. + (set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE. + * ifcvt (noce_emit_move_insn): Use SUBREG_BYTE. + * integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure + final byte offset is congruent to subreg's mode size. + (subst_constants): Use SUBREG_BYTE. + (mark_stores): Use subreg_regno_offset function. + * jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset + function and SUBREG_BYTE. + * local-alloc.c (combine_regs): Use subreg_regno_offset function. + (reg_is_born): Use subreg_hard_regno. + * recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte + endian correction code. Don't combine subregs unless resulting + offset aligns with type. Fix subreg constant extraction for DImode. + Simplify SUBREG of VOIDmode CONST_DOUBLE. + (general_operand): Remove dead mode_altering_drug code. + (indirect_operand): Use SUBREG_BYTE. + (constrain_operands): Use subreg_regno_offset function. + * reg-stack.c (get_true_reg): Use subreg_regno_offset function. + * regmove.c (regmove_optimize): Use SUBREG_BYTE. + (optimize_reg_copy_3): Use gen_lowpart_SUBREG. + * regs.h (REG_SIZE): Allow target to override. + (REGMODE_NATURAL_SIZE): New macro which target can override. + * reload.c (reload_inner_reg_of_subreg): subreg_regno should be used + on the entire subreg rtx. + (push_reload): Use SUBREG_BYTE in comments and code. + (find_dummy_reload): Use subreg_regno_offset. Only adjust offsets + for hard registers inside subregs. + (operands_match_p): Use subreg_regno_offset. + (find_reloads): Use SUBREG_BYTE and only advance offset for subregs + containing hard regs. + (find_reload_toplev): Use SUBREG_BYTE. Remove byte endian + corrections when fixing up MEM subregs. + (find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and + subreg_regno_offset where appropriate. + (find_reloads_subreg_address): Use SUBREG_BYTE. Remove + byte endian corrections when fixing up MEM subregs. + (subst_reloads): When combining two subregs, make sure final + offset is congruent to subreg's mode size. + (find_replacement): Use SUBREG_BYTE and subreg_regno_offset. + (refers_to_regno_for_reload_p): Use subreg_regno. + (reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset. + * reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian + correction code for memory subreg fixups. + (forget_old_reload_1): Use subreg_regno_offset. + (choose_reload_regs): Use subreg_regno. + (emit_input_reload_insns): Use SUBREG_BYTE. + (reload_combine_note_store): Use subreg_regno_offset. + (move2add_note_store): Use subreg_regno_offset. + * resource.c (update_live_status, mark_referenced_resources): Use + subreg_regno function. + (mark_set_resources): Use subreg_regno function. + * rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE. + (subreg_regno_offset, subreg_regno): Define prototypes. + (subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions. + (gen_lowpart_SUBREG): Add prototype. + * rtl.texi (subreg): Update to reflect new byte offset representation. + Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now. + * rtlanal.c (refers_to_regno_p): Use subreg_regno. + (reg_overlap_mentioned_p): Use subreg_regno. + (replace_regs); Make sure final offset of combined subreg is + congruent to size of subreg's mode. + (subreg_regno_offset): New function. + (subreg_regno): New function. + * sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE. + * sdbout.c (sdbout_symbol): Compute offset using alter_subreg. + * stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG. + * tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead. + (SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides. + * config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno. + (a29k_get_reloaded_address): Use SUBREG_BYTE. + (print_operand): Use SUBREG_BYTE. + * config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE. + * config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE. + (arm_reload_out_hi): Use SUBREG_BYTE. + * config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset + instead of SUBREG_WORD. + (d30v_print_operand_memory_reference): Use subreg_regno_offset. + * config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix + SUBREG creation to use byte offset. + * config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit + inverted load insns): Fix explicit rtl subregs to use byte + offsets. + * config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3, + udivsi3, umodsi3): Generate SUBREGs with byte offsets. + * config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE. + * config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl + to use byte offsets. + (unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets. + * config/i960/i960.md (extendhisi2): Generate SUBREGs with byte + offsets, also make sure it is congruent to SUBREG's mode size. + (extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2, + unnamed ldob insn): Generate SUBREGs with byte offset. + (zero_extendqihi2): SUBREG's are byte offsets. + * config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE. + (m68hc11_gen_highpart): Use SUBREG_BYTE. + * config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2, + zero-extendqisi2): Generate SUBREGs with byte offset. + (umulsidi3, mulsidi3, subreghi1ashrdi_const32, + subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit + subregs in rtl to use byte offsets. + * config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset. + * config/mips/mips.c (mips_move_1word): Use subreg_regno_offset. + (mips_move_2words): Use subreg_regno_offset. + (mips_secondary_reload_class): Use subreg_regno_offset. + * config/mips/mips.md (DImode plus, minus, move, and logical op + splits): Fixup explicit subregs in rtl to use byte offsets. + * config/mn10200/mn10200.c (print_operand): Use subreg_regno function. + * config/mn10300/mn10300.c (print_operand): Use subreg_regno function. + * config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in + rtl to use byte offsets. + * config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE. + * config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit + subregs to use byte offsets. + * config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1): + Fixup explicit subregs in rtl to use byte offsets. + * config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE + and remove byte endian correction code. + * config/sh/sh.c (output_movedouble): Use subreg_regno. + (gen_ashift_hi): Use SUBREG_BYTE. + (regs_used): Use subreg_regno_offset. + (machine_dependent_reorg): Use subreg_regno_offset. + * config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE. + * config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno. + (movdf_i4): Subregs are byte offsets now. + * config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE. + * config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed. + (REGMODE_NATURAL_SIZE): Override. + (REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode. + * config/sparc/sparc.md (TFmode move splits): Generate SUBREGs + with byte offsets. + (zero_extendhisi2, zero_extendqidi2_insn, extendhisi2, + extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn, + extendqidi2): Generate SUBREGs with byte offsets, also make sure + it is congruent to SUBREG's mode size. + (smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte + offsets. + (cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc, + cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2, + lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper + SUBREG_BYTE offset for non-paradoxical subregs in patterns. + * config/v850/v850.c (print_operand, output_move_double): Use + subreg_regno function. + 2001-04-03 Alexandre Oliva <aoliva@redhat.com> * configure.in (target_subdir): Use target_alias, not target. |