diff options
Diffstat (limited to 'libbacktrace/configure.ac')
| -rw-r--r-- | libbacktrace/configure.ac | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/libbacktrace/configure.ac b/libbacktrace/configure.ac new file mode 100644 index 00000000000..7a44fdfc7a8 --- /dev/null +++ b/libbacktrace/configure.ac @@ -0,0 +1,253 @@ +# configure.ac -- Backtrace configure script. +# Copyright (C) 2012 Free Software Foundation, Inc. + +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: + +# (1) Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. + +# (2) Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. + +# (3) The name of the author may not be used to +# endorse or promote products derived from this software without +# specific prior written permission. + +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR +# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, +# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. + +AC_PREREQ(2.64) +AC_INIT(package-unused, version-unused,, libbacktrace) +AC_CONFIG_SRCDIR(backtrace.h) +AC_CONFIG_HEADER(config.h) + +AC_CANONICAL_SYSTEM +target_alias=${target_alias-$host_alias} + +libtool_VERSION=1:0:0 +AC_SUBST(libtool_VERSION) + +AM_INIT_AUTOMAKE([1.11.1 foreign no-dist no-define -Wall -Wno-portability]) + +AM_MAINTAINER_MODE + +AC_ARG_WITH(target-subdir, +[ --with-target-subdir=SUBDIR Configuring in a subdirectory for target]) + +# We must force CC to /not/ be precious variables; otherwise +# the wrong, non-multilib-adjusted value will be used in multilibs. +# As a side effect, we have to subst CFLAGS ourselves. +m4_rename([_AC_ARG_VAR_PRECIOUS],[backtrace_PRECIOUS]) +m4_define([_AC_ARG_VAR_PRECIOUS],[]) +AC_PROG_CC +m4_rename_force([backtrace_PRECIOUS],[_AC_ARG_VAR_PRECIOUS]) + +AC_SUBST(CFLAGS) + +AC_PROG_RANLIB + +AC_PROG_AWK +case "$AWK" in +"") AC_MSG_ERROR([can't build without awk]) ;; +esac + +LT_INIT([disable-shared]) +AM_PROG_LIBTOOL + +backtrace_supported=yes + +if test -n "${with_target_subdir}"; then + # We are compiling a GCC library. We can assume that the unwind + # library exists. + AM_ENABLE_MULTILIB(, ..) + BACKTRACE_FILE="backtrace.lo simple.lo" +else + AC_CHECK_HEADER([unwind.h], + [AC_CHECK_FUNC([_Unwind_Backtrace], + [BACKTRACE_FILE="backtrace.lo simple.lo"], + [BACKTRACE_FILE="nounwind.lo" + backtrace_supported=no])], + [BACKTRACE_FILE="nounwind.lo" + backtrace_supported=no]) +fi +AC_SUBST(BACKTRACE_FILE) + +ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wstrict-prototypes \ + -Wmissing-prototypes -Wold-style-definition \ + -Wmissing-format-attribute -Wcast-qual], + [WARN_FLAGS]) + +if test "x$GCC" = "xyes"; then + WARN_FLAGS="$WARN_FLAGS -Werror" +fi + +AC_SUBST(WARN_FLAGS) + +GCC_CHECK_UNWIND_GETIPINFO + +# When building as a target library, shared libraries may want to link +# this in. We don't want to provide another shared library to +# complicate dependencies. Instead, we just compile with -fPIC. +PIC_FLAG= +if test -n "${with_target_subdir}"; then + PIC_FLAG=-fPIC +fi +AC_SUBST(PIC_FLAG) + +# Test for __sync support. +AC_CACHE_CHECK([__sync extensions], +[libbacktrace_cv_sys_sync], +[if test -n "${with_target_subdir}"; then + libbacktrace_cv_sys_sync=yes + else + AC_LINK_IFELSE( + [AC_LANG_PROGRAM([int i;], + [__sync_bool_compare_and_swap (&i, i, i); + __sync_lock_test_and_set (&i, 1); + __sync_lock_release (&i);])], + [libbacktrace_cv_sys_sync=yes], + [libbacktrace_cv_sys_sync=no]) + fi]) +BACKTRACE_SUPPORTS_THREADS=0 +if test "$libbacktrace_cv_sys_sync" = "yes"; then + BACKTRACE_SUPPORTS_THREADS=1 + AC_DEFINE([HAVE_SYNC_FUNCTIONS], 1, + [Define to 1 if you have the __sync functions]) +fi +AC_SUBST(BACKTRACE_SUPPORTS_THREADS) + +# The library needs to be able to read the executable itself. Compile +# a file to determine the executable format. The awk script +# filetype.awk prints out the file type. +AC_CACHE_CHECK([output filetype], +[libbacktrace_cv_sys_filetype], +[filetype= +AC_COMPILE_IFELSE( + [AC_LANG_PROGRAM([int i;], [int j;])], + [filetype=`${AWK} -f $srcdir/filetype.awk conftest.$ac_objext`], + [AC_MSG_FAILURE([compiler failed])]) +libbacktrace_cv_sys_filetype=$filetype]) + +# Match the file type to decide what files to compile. +FORMAT_FILE= +case "$libbacktrace_cv_sys_filetype" in +elf*) FORMAT_FILE="elf.lo" ;; +*) AC_MSG_WARN([could not determine output file type]) + FORMAT_FILE="unknown.lo" + backtrace_supported=no + ;; +esac +AC_SUBST(FORMAT_FILE) + +# ELF defines. +elfsize= +case "$libbacktrace_cv_sys_filetype" in +elf32) elfsize=32 ;; +elf64) elfsize=64 ;; +esac +AC_DEFINE_UNQUOTED([BACKTRACE_ELF_SIZE], [$elfsize], [ELF size: 32 or 64]) + +BACKTRACE_SUPPORTED=0 +if test "$backtrace_supported" = "yes"; then + BACKTRACE_SUPPORTED=1 +fi +AC_SUBST(BACKTRACE_SUPPORTED) + +AC_CHECK_HEADERS(sys/mman.h) +if test "$ac_cv_header_sys_mman_h" = "no"; then + have_mmap=no +else + if test -n "${with_target_subdir}"; then + # When built as a GCC target library, we can't do a link test. We + # simply assume that if we have mman.h, we have mmap. + have_mmap=yes + else + AC_CHECK_FUNC(mmap, [have_mmap=yes], [have_mmap=no]) + fi +fi +if test "$have_mmap" = "no"; then + VIEW_FILE=read.lo + ALLOC_FILE=alloc.lo +else + VIEW_FILE=mmapio.lo + AC_PREPROC_IFELSE([ +#include <sys/mman.h> +#if !defined(MAP_ANONYMOUS) && !defined(MAP_ANON) + #error no MAP_ANONYMOUS +#endif +], [ALLOC_FILE=mmap.lo], [ALLOC_FILE=alloc.lo]) +fi +AC_SUBST(VIEW_FILE) +AC_SUBST(ALLOC_FILE) + +BACKTRACE_USES_MALLOC=0 +if test "$ALLOC_FILE" = "alloc.lo"; then + BACKTRACE_USES_MALLOC=1 +fi +AC_SUBST(BACKTRACE_USES_MALLOC) + +AC_CACHE_CHECK([whether tests can run], + [libbacktrace_cv_sys_native], + [AC_RUN_IFELSE([AC_LANG_PROGRAM([], [return 0;])], + [libbacktrace_cv_sys_native=yes], + [libbacktrace_cv_sys_native=no], + [libbacktrace_cv_sys_native=no])]) +AM_CONDITIONAL(NATIVE, test "$libbacktrace_cv_sys_native" = "yes") + +if test "${multilib}" = "yes"; then + multilib_arg="--enable-multilib" +else + multilib_arg= +fi + +AC_CONFIG_FILES(Makefile backtrace-supported.h) + +# We need multilib support, but only if configuring for the target. +AC_CONFIG_COMMANDS([default], +[if test -n "$CONFIG_FILES"; then + if test -n "${with_target_subdir}"; then + # Multilibs need MULTISUBDIR defined correctly in certain makefiles so + # that multilib installs will end up installed in the correct place. + # The testsuite needs it for multilib-aware ABI baseline files. + # To work around this not being passed down from config-ml.in -> + # srcdir/Makefile.am -> srcdir/{src,libsupc++,...}/Makefile.am, manually + # append it here. Only modify Makefiles that have just been created. + # + # Also, get rid of this simulated-VPATH thing that automake does. + cat > vpsed << \_EOF + s!`test -f '$<' || echo '$(srcdir)/'`!! +_EOF + for i in $SUBDIRS; do + case $CONFIG_FILES in + *${i}/Makefile*) + #echo "Adding MULTISUBDIR to $i/Makefile" + sed -f vpsed $i/Makefile > tmp + grep '^MULTISUBDIR =' Makefile >> tmp + mv tmp $i/Makefile + ;; + esac + done + rm vpsed + fi + fi +], +[ +# Variables needed in config.status (file generation) which aren't already +# passed by autoconf. +SUBDIRS="$SUBDIRS" +]) + +AC_OUTPUT |