diff options
Diffstat (limited to 'libgcc/config/rs6000/quad-float128.h')
| -rw-r--r-- | libgcc/config/rs6000/quad-float128.h | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/libgcc/config/rs6000/quad-float128.h b/libgcc/config/rs6000/quad-float128.h new file mode 100644 index 00000000000..423cb05d9ea --- /dev/null +++ b/libgcc/config/rs6000/quad-float128.h @@ -0,0 +1,203 @@ +/* Software floating-point emulation. + Definitions for IEEE Quad Precision on the PowerPC. + Copyright (C) 2016 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Michael Meissner (meissner@linux.vnet.ibm.com). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + In addition to the permissions in the GNU Lesser General Public + License, the Free Software Foundation gives you unlimited + permission to link the compiled version of this file into + combinations with other programs, and to distribute those + combinations without any restriction coming from the use of this + file. (The Lesser General Public License restrictions do apply in + other respects; for example, they cover modification of the file, + and distribution when not linked into a combine executable.) + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +/* quad.h defines the TFtype type by: + typedef float TFtype __attribute__ ((mode (TF))); + + This define forces it to use KFmode (aka, ieee 128-bit floating point). */ +#define TF KF + +/* Force the use of the VSX instruction set. */ +#if defined(_ARCH_PPC) && (!defined(__VSX__) || !defined(__FLOAT128__)) +#pragma GCC target ("vsx,float128") +#endif + +#include <quad.h> + +/* Add prototypes of the library functions created. In case the appropriate + int/long types are not declared in scope by the time quad.h is included, + provide our own version. */ +typedef int SItype_ppc __attribute__ ((__mode__ (__SI__))); +typedef int DItype_ppc __attribute__ ((__mode__ (__DI__))); +typedef unsigned USItype_ppc __attribute__ ((__mode__ (__SI__))); +typedef unsigned UDItype_ppc __attribute__ ((__mode__ (__DI__))); + +#ifdef _ARCH_PPC64 +typedef int TItype_ppc __attribute__ ((__mode__ (__TI__))); +typedef unsigned UTItype_ppc __attribute__ ((__mode__ (__TI__))); +#endif + +/* Software emulation functions. */ +extern TFtype __addkf3_sw (TFtype, TFtype); +extern TFtype __subkf3_sw (TFtype, TFtype); +extern TFtype __mulkf3_sw (TFtype, TFtype); +extern TFtype __divkf3_sw (TFtype, TFtype); +extern TFtype __negkf2_sw (TFtype); +extern CMPtype __eqkf2_sw (TFtype, TFtype); +extern CMPtype __gekf2_sw (TFtype, TFtype); +extern CMPtype __lekf2_sw (TFtype, TFtype); +extern CMPtype __unordkf2_sw (TFtype, TFtype); +extern TFtype __extendsfkf2_sw (float); +extern TFtype __extenddfkf2_sw (double); +extern float __trunckfsf2_sw (TFtype); +extern double __trunckfdf2_sw (TFtype); +extern SItype_ppc __fixkfsi_sw (TFtype); +extern DItype_ppc __fixkfdi_sw (TFtype); +extern USItype_ppc __fixunskfsi_sw (TFtype); +extern UDItype_ppc __fixunskfdi_sw (TFtype); +extern TFtype __floatsikf_sw (SItype_ppc); +extern TFtype __floatdikf_sw (DItype_ppc); +extern TFtype __floatunsikf_sw (USItype_ppc); +extern TFtype __floatundikf_sw (UDItype_ppc); +extern __ibm128 __extendkftf2_sw (TFtype); +extern TFtype __trunctfkf2_sw (__ibm128); + +#ifdef _ARCH_PPC64 +/* We do not provide ifunc resolvers for __fixkfti, __fixunskfti, __floattikf, + and __floatuntikf. There is no ISA 3.0 instruction that converts between + 128-bit integer types and 128-bit IEEE floating point, or vice versa. So + use the emulator functions for these conversions. */ + +extern TItype_ppc __fixkfti (TFtype); +extern UTItype_ppc __fixunskfti (TFtype); +extern TFtype __floattikf (TItype_ppc); +extern TFtype __floatuntikf (UTItype_ppc); +#endif + +/* Functions using the ISA 3.0 hardware support. If the code is compiled with + -mcpu=power9, it will not use these functions, but if it was compiled with + -mcpu=power7 or -mcpu=power8 and run on a ISA 3.0 system, it will use the + hardware instruction. */ +extern TFtype __addkf3_hw (TFtype, TFtype); +extern TFtype __subkf3_hw (TFtype, TFtype); +extern TFtype __mulkf3_hw (TFtype, TFtype); +extern TFtype __divkf3_hw (TFtype, TFtype); +extern TFtype __negkf2_hw (TFtype); +extern CMPtype __eqkf2_hw (TFtype, TFtype); +extern CMPtype __gekf2_hw (TFtype, TFtype); +extern CMPtype __lekf2_hw (TFtype, TFtype); +extern CMPtype __unordkf2_hw (TFtype, TFtype); +extern TFtype __extendsfkf2_hw (float); +extern TFtype __extenddfkf2_hw (double); +extern float __trunckfsf2_hw (TFtype); +extern double __trunckfdf2_hw (TFtype); +extern SItype_ppc __fixkfsi_hw (TFtype); +extern DItype_ppc __fixkfdi_hw (TFtype); +extern USItype_ppc __fixunskfsi_hw (TFtype); +extern UDItype_ppc __fixunskfdi_hw (TFtype); +extern TFtype __floatsikf_hw (SItype_ppc); +extern TFtype __floatdikf_hw (DItype_ppc); +extern TFtype __floatunsikf_hw (USItype_ppc); +extern TFtype __floatundikf_hw (UDItype_ppc); +extern __ibm128 __extendkftf2_hw (TFtype); +extern TFtype __trunctfkf2_hw (__ibm128); + +/* Ifunc function declarations, to automatically switch between software + emulation and hardware support. */ +extern TFtype __addkf3 (TFtype, TFtype); +extern TFtype __subkf3 (TFtype, TFtype); +extern TFtype __mulkf3 (TFtype, TFtype); +extern TFtype __divkf3 (TFtype, TFtype); +extern TFtype __negkf2 (TFtype); +extern CMPtype __eqkf2 (TFtype, TFtype); +extern CMPtype __nekf2 (TFtype, TFtype); +extern CMPtype __gekf2 (TFtype, TFtype); +extern CMPtype __gtkf2 (TFtype, TFtype); +extern CMPtype __lekf2 (TFtype, TFtype); +extern CMPtype __ltkf2 (TFtype, TFtype); +extern CMPtype __unordkf2 (TFtype, TFtype); +extern TFtype __extendsfkf2 (float); +extern TFtype __extenddfkf2 (double); +extern float __trunckfsf2 (TFtype); +extern double __trunckfdf2 (TFtype); +extern SItype_ppc __fixkfsi (TFtype); +extern DItype_ppc __fixkfdi (TFtype); +extern USItype_ppc __fixunskfsi (TFtype); +extern UDItype_ppc __fixunskfdi (TFtype); +extern TFtype __floatsikf (SItype_ppc); +extern TFtype __floatdikf (DItype_ppc); +extern TFtype __floatunsikf (USItype_ppc); +extern TFtype __floatundikf (UDItype_ppc); +extern __ibm128 __extendkftf2 (TFtype); +extern TFtype __trunctfkf2 (__ibm128); + +#ifdef __LITTLE_ENDIAN__ +#define HIGH_WORD 1 +#define LOW_WORD 0 +#else +#define HIGH_WORD 0 +#define LOW_WORD 1 +#endif + +/* Implementation of conversions between __ibm128 and __float128, to allow the + same code to be used on systems with IEEE 128-bit emulation and with IEEE + 128-bit hardware support. */ + +#define CVT_FLOAT128_TO_IBM128(RESULT, VALUE) \ +{ \ + double __high, __low; \ + __float128 __value = (VALUE); \ + \ + __high = (double) __value; \ + if (__builtin_isnan (__high) || __builtin_isinf (__high)) \ + __low = 0.0; \ + \ + else \ + { \ + double __high_temp; \ + \ + __low = (double) (__value - (__float128) __high); \ + /* Renormalize low/high and move them into canonical IBM long \ + double form. */ \ + __high_temp = __high + __low; \ + __low = (__high - __high_temp) + __low; \ + __high = __high_temp; \ + } \ + \ + RESULT = __builtin_pack_ibm128 (__high, __low); \ +} + +#define CVT_IBM128_TO_FLOAT128(RESULT, VALUE) \ +{ \ + __ibm128 __value = (VALUE); \ + double __high = __builtin_unpack_ibm128 (__value, HIGH_WORD); \ + double __low = __builtin_unpack_ibm128 (__value, LOW_WORD); \ + \ + /* Handle the special cases of NAN and infinity. */ \ + if (__builtin_isnan (__high) || __builtin_isinf (__high)) \ + RESULT = (__float128) __high; \ + \ + /* If low is 0.0, there no need to do the add. In addition, \ + avoiding the add produces the correct sign if high is -0.0. */ \ + else if (__low == 0.0) \ + RESULT = (__float128) __high; \ + \ + else \ + RESULT = ((__float128) __high) + ((__float128) __low); \ +} |