/* Basic block reordering routines for the GNU compiler. Copyright (C) 2000-2013 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see . */ /* This (greedy) algorithm constructs traces in several rounds. The construction starts from "seeds". The seed for the first round is the entry point of the function. When there are more than one seed, the one with the lowest key in the heap is selected first (see bb_to_key). Then the algorithm repeatedly adds the most probable successor to the end of a trace. Finally it connects the traces. There are two parameters: Branch Threshold and Exec Threshold. If the probability of an edge to a successor of the current basic block is lower than Branch Threshold or its frequency is lower than Exec Threshold, then the successor will be the seed in one of the next rounds. Each round has these parameters lower than the previous one. The last round has to have these parameters set to zero so that the remaining blocks are picked up. The algorithm selects the most probable successor from all unvisited successors and successors that have been added to this trace. The other successors (that has not been "sent" to the next round) will be other seeds for this round and the secondary traces will start from them. If the successor has not been visited in this trace, it is added to the trace (however, there is some heuristic for simple branches). If the successor has been visited in this trace, a loop has been found. If the loop has many iterations, the loop is rotated so that the source block of the most probable edge going out of the loop is the last block of the trace. If the loop has few iterations and there is no edge from the last block of the loop going out of the loop, the loop header is duplicated. When connecting traces, the algorithm first checks whether there is an edge from the last block of a trace to the first block of another trace. When there are still some unconnected traces it checks whether there exists a basic block BB such that BB is a successor of the last block of a trace and BB is a predecessor of the first block of another trace. In this case, BB is duplicated, added at the end of the first trace and the traces are connected through it. The rest of traces are simply connected so there will be a jump to the beginning of the rest of traces. The above description is for the full algorithm, which is used when the function is optimized for speed. When the function is optimized for size, in order to reduce long jumps and connect more fallthru edges, the algorithm is modified as follows: (1) Break long traces to short ones. A trace is broken at a block that has multiple predecessors/ successors during trace discovery. When connecting traces, only connect Trace n with Trace n + 1. This change reduces most long jumps compared with the above algorithm. (2) Ignore the edge probability and frequency for fallthru edges. (3) Keep the original order of blocks when there is no chance to fall through. We rely on the results of cfg_cleanup. To implement the change for code size optimization, block's index is selected as the key and all traces are found in one round. References: "Software Trace Cache" A. Ramirez, J. Larriba-Pey, C. Navarro, J. Torrellas and M. Valero; 1999 http://citeseer.nj.nec.com/15361.html */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "tree.h" #include "rtl.h" #include "regs.h" #include "flags.h" #include "output.h" #include "fibheap.h" #include "target.h" #include "function.h" #include "tm_p.h" #include "obstack.h" #include "expr.h" #include "params.h" #include "diagnostic-core.h" #include "toplev.h" /* user_defined_section_attribute */ #include "tree-pass.h" #include "df.h" #include "bb-reorder.h" #include "except.h" /* The number of rounds. In most cases there will only be 4 rounds, but when partitioning hot and cold basic blocks into separate sections of the object file there will be an extra round. */ #define N_ROUNDS 5 /* Stubs in case we don't have a return insn. We have to check at run time too, not only compile time. */ #ifndef HAVE_return #define HAVE_return 0 #define gen_return() NULL_RTX #endif struct target_bb_reorder default_target_bb_reorder; #if SWITCHABLE_TARGET struct target_bb_reorder *this_target_bb_reorder = &default_target_bb_reorder; #endif #define uncond_jump_length \ (this_target_bb_reorder->x_uncond_jump_length) /* Branch thresholds in thousandths (per mille) of the REG_BR_PROB_BASE. */ static const int branch_threshold[N_ROUNDS] = {400, 200, 100, 0, 0}; /* Exec thresholds in thousandths (per mille) of the frequency of bb 0. */ static const int exec_threshold[N_ROUNDS] = {500, 200, 50, 0, 0}; /* If edge frequency is lower than DUPLICATION_THRESHOLD per mille of entry block the edge destination is not duplicated while connecting traces. */ #define DUPLICATION_THRESHOLD 100 /* Structure to hold needed information for each basic block. */ typedef struct bbro_basic_block_data_def { /* Which trace is the bb start of (-1 means it is not a start of any). */ int start_of_trace; /* Which trace is the bb end of (-1 means it is not an end of any). */ int end_of_trace; /* Which trace is the bb in? */ int in_trace; /* Which trace was this bb visited in? */ int visited; /* Which heap is BB in (if any)? */ fibheap_t heap; /* Which heap node is BB in (if any)? */ fibnode_t node; } bbro_basic_block_data; /* The current size of the following dynamic array. */ static int array_size; /* The array which holds needed information for basic blocks. */ static bbro_basic_block_data *bbd; /* To avoid frequent reallocation the size of arrays is greater than needed, the number of elements is (not less than) 1.25 * size_wanted. */ #define GET_ARRAY_SIZE(X) ((((X) / 4) + 1) * 5) /* Free the memory and set the pointer to NULL. */ #define FREE(P) (gcc_assert (P), free (P), P = 0) /* Structure for holding information about a trace. */ struct trace { /* First and last basic block of the trace. */ basic_block first, last; /* The round of the STC creation which this trace was found in. */ int round; /* The length (i.e. the number of basic blocks) of the trace. */ int length; }; /* Maximum frequency and count of one of the entry blocks. */ static int max_entry_frequency; static gcov_type max_entry_count; /* Local function prototypes. */ static void find_traces (int *, struct trace *); static basic_block rotate_loop (edge, struct trace *, int); static void mark_bb_visited (basic_block, int); static void find_traces_1_round (int, int, gcov_type, struct trace *, int *, int, fibheap_t *, int); static basic_block copy_bb (basic_block, edge, basic_block, int); static fibheapkey_t bb_to_key (basic_block); static bool better_edge_p (const_basic_block, const_edge, int, int, int, int, const_edge); static bool connect_better_edge_p (const_edge, bool, int, const_edge, struct trace *); static void connect_traces (int, struct trace *); static bool copy_bb_p (const_basic_block, int); static bool push_to_next_round_p (const_basic_block, int, int, int, gcov_type); /* Return the trace number in which BB was visited. */ static int bb_visited_trace (const_basic_block bb) { gcc_assert (bb->index < array_size); return bbd[bb->index].visited; } /* This function marks BB that it was visited in trace number TRACE. */ static void mark_bb_visited (basic_block bb, int trace) { bbd[bb->index].visited = trace; if (bbd[bb->index].heap) { fibheap_delete_node (bbd[bb->index].heap, bbd[bb->index].node); bbd[bb->index].heap = NULL; bbd[bb->index].node = NULL; } } /* Check to see if bb should be pushed into the next round of trace collections or not. Reasons for pushing the block forward are 1). If the block is cold, we are doing partitioning, and there will be another round (cold partition blocks are not supposed to be collected into traces until the very last round); or 2). There will be another round, and the basic block is not "hot enough" for the current round of trace collection. */ static bool push_to_next_round_p (const_basic_block bb, int round, int number_of_rounds, int exec_th, gcov_type count_th) { bool there_exists_another_round; bool block_not_hot_enough; there_exists_another_round = round < number_of_rounds - 1; block_not_hot_enough = (bb->frequency < exec_th || bb->count < count_th || probably_never_executed_bb_p (cfun, bb)); if (there_exists_another_round && block_not_hot_enough) return true; else return false; } /* Find the traces for Software Trace Cache. Chain each trace through RBI()->next. Store the number of traces to N_TRACES and description of traces to TRACES. */ static void find_traces (int *n_traces, struct trace *traces) { int i; int number_of_rounds; edge e; edge_iterator ei; fibheap_t heap; /* Add one extra round of trace collection when partitioning hot/cold basic blocks into separate sections. The last round is for all the cold blocks (and ONLY the cold blocks). */ number_of_rounds = N_ROUNDS - 1; /* Insert entry points of function into heap. */ heap = fibheap_new (); max_entry_frequency = 0; max_entry_count = 0; FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR_FOR_FN (cfun)->succs) { bbd[e->dest->index].heap = heap; bbd[e->dest->index].node = fibheap_insert (heap, bb_to_key (e->dest), e->dest); if (e->dest->frequency > max_entry_frequency) max_entry_frequency = e->dest->frequency; if (e->dest->count > max_entry_count) max_entry_count = e->dest->count; } /* Find the traces. */ for (i = 0; i < number_of_rounds; i++) { gcov_type count_threshold; if (dump_file) fprintf (dump_file, "STC - round %d\n", i + 1); if (max_entry_count < INT_MAX / 1000) count_threshold = max_entry_count * exec_threshold[i] / 1000; else count_threshold = max_entry_count / 1000 * exec_threshold[i]; find_traces_1_round (REG_BR_PROB_BASE * branch_threshold[i] / 1000, max_entry_frequency * exec_threshold[i] / 1000, count_threshold, traces, n_traces, i, &heap, number_of_rounds); } fibheap_delete (heap); if (dump_file) { for (i = 0; i < *n_traces; i++) { basic_block bb; fprintf (dump_file, "Trace %d (round %d): ", i + 1, traces[i].round + 1); for (bb = traces[i].first; bb != traces[i].last; bb = (basic_block) bb->aux) fprintf (dump_file, "%d [%d] ", bb->index, bb->frequency); fprintf (dump_file, "%d [%d]\n", bb->index, bb->frequency); } fflush (dump_file); } } /* Rotate loop whose back edge is BACK_EDGE in the tail of trace TRACE (with sequential number TRACE_N). */ static basic_block rotate_loop (edge back_edge, struct trace *trace, int trace_n) { basic_block bb; /* Information about the best end (end after rotation) of the loop. */ basic_block best_bb = NULL; edge best_edge = NULL; int best_freq = -1; gcov_type best_count = -1; /* The best edge is preferred when its destination is not visited yet or is a start block of some trace. */ bool is_preferred = false; /* Find the most frequent edge that goes out from current trace. */ bb = back_edge->dest; do { edge e; edge_iterator ei; FOR_EACH_EDGE (e, ei, bb->succs) if (e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun) && bb_visited_trace (e->dest) != trace_n && (e->flags & EDGE_CAN_FALLTHRU) && !(e->flags & EDGE_COMPLEX)) { if (is_preferred) { /* The best edge is preferred. */ if (!bb_visited_trace (e->dest) || bbd[e->dest->index].start_of_trace >= 0) { /* The current edge E is also preferred. */ int freq = EDGE_FREQUENCY (e); if (freq > best_freq || e->count > best_count) { best_freq = freq; best_count = e->count; best_edge = e; best_bb = bb; } } } else { if (!bb_visited_trace (e->dest) || bbd[e->dest->index].start_of_trace >= 0) { /* The current edge E is preferred. */ is_preferred = true; best_freq = EDGE_FREQUENCY (e); best_count = e->count; best_edge = e; best_bb = bb; } else { int freq = EDGE_FREQUENCY (e); if (!best_edge || freq > best_freq || e->count > best_count) { best_freq = freq; best_count = e->count; best_edge = e; best_bb = bb; } } } } bb = (basic_block) bb->aux; } while (bb != back_edge->dest); if (best_bb) { /* Rotate the loop so that the BEST_EDGE goes out from the last block of the trace. */ if (back_edge->dest == trace->first) { trace->first = (basic_block) best_bb->aux; } else { basic_block prev_bb; for (prev_bb = trace->first; prev_bb->aux != back_edge->dest; prev_bb = (basic_block) prev_bb->aux) ; prev_bb->aux = best_bb->aux; /* Try to get rid of uncond jump to cond jump. */ if (single_succ_p (prev_bb)) { basic_block header = single_succ (prev_bb); /* Duplicate HEADER if it is a small block containing cond jump in the end. */ if (any_condjump_p (BB_END (header)) && copy_bb_p (header, 0) && !find_reg_note (BB_END (header), REG_CROSSING_JUMP, NULL_RTX)) copy_bb (header, single_succ_edge (prev_bb), prev_bb, trace_n); } } } else { /* We have not found suitable loop tail so do no rotation. */ best_bb = back_edge->src; } best_bb->aux = NULL; return best_bb; } /* One round of finding traces. Find traces for BRANCH_TH and EXEC_TH i.e. do not include basic blocks whose probability is lower than BRANCH_TH or whose frequency is lower than EXEC_TH into traces (or whose count is lower than COUNT_TH). Store the new traces into TRACES and modify the number of traces *N_TRACES. Set the round (which the trace belongs to) to ROUND. The function expects starting basic blocks to be in *HEAP and will delete *HEAP and store starting points for the next round into new *HEAP. */ static void find_traces_1_round (int branch_th, int exec_th, gcov_type count_th, struct trace *traces, int *n_traces, int round, fibheap_t *heap, int number_of_rounds) { /* Heap for discarded basic blocks which are possible starting points for the next round. */ fibheap_t new_heap = fibheap_new (); bool for_size = optimize_function_for_size_p (cfun); while (!fibheap_empty (*heap)) { basic_block bb; struct trace *trace; edge best_edge, e; fibheapkey_t key; edge_iterator ei; bb = (basic_block) fibheap_extract_min (*heap); bbd[bb->index].heap = NULL; bbd[bb->index].node = NULL; if (dump_file) fprintf (dump_file, "Getting bb %d\n", bb->index); /* If the BB's frequency is too low, send BB to the next round. When partitioning hot/cold blocks into separate sections, make sure all the cold blocks (and ONLY the cold blocks) go into the (extra) final round. When optimizing for size, do not push to next round. */ if (!for_size && push_to_next_round_p (bb, round, number_of_rounds, exec_th, count_th)) { int key = bb_to_key (bb); bbd[bb->index].heap = new_heap; bbd[bb->index].node = fibheap_insert (new_heap, key, bb); if (dump_file) fprintf (dump_file, " Possible start point of next round: %d (key: %d)\n", bb->index, key); continue; } trace = traces + *n_traces; trace->first = bb; trace->round = round; trace->length = 0; bbd[bb->index].in_trace = *n_traces; (*n_traces)++; do { int prob, freq; bool ends_in_call; /* The probability and frequency of the best edge. */ int best_prob = INT_MIN / 2; int best_freq = INT_MIN / 2; best_edge = NULL; mark_bb_visited (bb, *n_traces); trace->length++; if (dump_file) fprintf (dump_file, "Basic block %d was visited in trace %d\n", bb->index, *n_traces - 1); ends_in_call = block_ends_with_call_p (bb); /* Select the successor that will be placed after BB. */ FOR_EACH_EDGE (e, ei, bb->succs) { gcc_assert (!(e->flags & EDGE_FAKE)); if (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun)) continue; if (bb_visited_trace (e->dest) && bb_visited_trace (e->dest) != *n_traces) continue; if (BB_PARTITION (e->dest) != BB_PARTITION (bb)) continue; prob = e->probability; freq = e->dest->frequency; /* The only sensible preference for a call instruction is the fallthru edge. Don't bother selecting anything else. */ if (ends_in_call) { if (e->flags & EDGE_CAN_FALLTHRU) { best_edge = e; best_prob = prob; best_freq = freq; } continue; } /* Edge that cannot be fallthru or improbable or infrequent successor (i.e. it is unsuitable successor). When optimizing for size, ignore the probability and frequency. */ if (!(e->flags & EDGE_CAN_FALLTHRU) || (e->flags & EDGE_COMPLEX) || ((prob < branch_th || EDGE_FREQUENCY (e) < exec_th || e->count < count_th) && (!for_size))) continue; /* If partitioning hot/cold basic blocks, don't consider edges that cross section boundaries. */ if (better_edge_p (bb, e, prob, freq, best_prob, best_freq, best_edge)) { best_edge = e; best_prob = prob; best_freq = freq; } } /* If the best destination has multiple predecessors, and can be duplicated cheaper than a jump, don't allow it to be added to a trace. We'll duplicate it when connecting traces. */ if (best_edge && EDGE_COUNT (best_edge->dest->preds) >= 2 && copy_bb_p (best_edge->dest, 0)) best_edge = NULL; /* If the best destination has multiple successors or predecessors, don't allow it to be added when optimizing for size. This makes sure predecessors with smaller index are handled before the best destinarion. It breaks long trace and reduces long jumps. Take if-then-else as an example. A / \ B C \ / D If we do not remove the best edge B->D/C->D, the final order might be A B D ... C. C is at the end of the program. If D's successors and D are complicated, might need long jumps for A->C and C->D. Similar issue for order: A C D ... B. After removing the best edge, the final result will be ABCD/ ACBD. It does not add jump compared with the previous order. But it reduces the possibility of long jumps. */ if (best_edge && for_size && (EDGE_COUNT (best_edge->dest->succs) > 1 || EDGE_COUNT (best_edge->dest->preds) > 1)) best_edge = NULL; /* Add all non-selected successors to the heaps. */ FOR_EACH_EDGE (e, ei, bb->succs) { if (e == best_edge || e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun) || bb_visited_trace (e->dest)) continue; key = bb_to_key (e->dest); if (bbd[e->dest->index].heap) { /* E->DEST is already in some heap. */ if (key != bbd[e->dest->index].node->key) { if (dump_file) { fprintf (dump_file, "Changing key for bb %d from %ld to %ld.\n", e->dest->index, (long) bbd[e->dest->index].node->key, key); } fibheap_replace_key (bbd[e->dest->index].heap, bbd[e->dest->index].node, key); } } else { fibheap_t which_heap = *heap; prob = e->probability; freq = EDGE_FREQUENCY (e); if (!(e->flags & EDGE_CAN_FALLTHRU) || (e->flags & EDGE_COMPLEX) || prob < branch_th || freq < exec_th || e->count < count_th) { /* When partitioning hot/cold basic blocks, make sure the cold blocks (and only the cold blocks) all get pushed to the last round of trace collection. When optimizing for size, do not push to next round. */ if (!for_size && push_to_next_round_p (e->dest, round, number_of_rounds, exec_th, count_th)) which_heap = new_heap; } bbd[e->dest->index].heap = which_heap; bbd[e->dest->index].node = fibheap_insert (which_heap, key, e->dest); if (dump_file) { fprintf (dump_file, " Possible start of %s round: %d (key: %ld)\n", (which_heap == new_heap) ? "next" : "this", e->dest->index, (long) key); } } } if (best_edge) /* Suitable successor was found. */ { if (bb_visited_trace (best_edge->dest) == *n_traces) { /* We do nothing with one basic block loops. */ if (best_edge->dest != bb) { if (EDGE_FREQUENCY (best_edge) > 4 * best_edge->dest->frequency / 5) { /* The loop has at least 4 iterations. If the loop header is not the first block of the function we can rotate the loop. */ if (best_edge->dest != ENTRY_BLOCK_PTR_FOR_FN (cfun)->next_bb) { if (dump_file) { fprintf (dump_file, "Rotating loop %d - %d\n", best_edge->dest->index, bb->index); } bb->aux = best_edge->dest; bbd[best_edge->dest->index].in_trace = (*n_traces) - 1; bb = rotate_loop (best_edge, trace, *n_traces); } } else { /* The loop has less than 4 iterations. */ if (single_succ_p (bb) && copy_bb_p (best_edge->dest, optimize_edge_for_speed_p (best_edge))) { bb = copy_bb (best_edge->dest, best_edge, bb, *n_traces); trace->length++; } } } /* Terminate the trace. */ break; } else { /* Check for a situation A /| B | \| C where EDGE_FREQUENCY (AB) + EDGE_FREQUENCY (BC) >= EDGE_FREQUENCY (AC). (i.e. 2 * B->frequency >= EDGE_FREQUENCY (AC) ) Best ordering is then A B C. When optimizing for size, A B C is always the best order. This situation is created for example by: if (A) B; C; */ FOR_EACH_EDGE (e, ei, bb->succs) if (e != best_edge && (e->flags & EDGE_CAN_FALLTHRU) && !(e->flags & EDGE_COMPLEX) && !bb_visited_trace (e->dest) && single_pred_p (e->dest) && !(e->flags & EDGE_CROSSING) && single_succ_p (e->dest) && (single_succ_edge (e->dest)->flags & EDGE_CAN_FALLTHRU) && !(single_succ_edge (e->dest)->flags & EDGE_COMPLEX) && single_succ (e->dest) == best_edge->dest && (2 * e->dest->frequency >= EDGE_FREQUENCY (best_edge) || for_size)) { best_edge = e; if (dump_file) fprintf (dump_file, "Selecting BB %d\n", best_edge->dest->index); break; } bb->aux = best_edge->dest; bbd[best_edge->dest->index].in_trace = (*n_traces) - 1; bb = best_edge->dest; } } } while (best_edge); trace->last = bb; bbd[trace->first->index].start_of_trace = *n_traces - 1; bbd[trace->last->index].end_of_trace = *n_traces - 1; /* The trace is terminated so we have to recount the keys in heap (some block can have a lower key because now one of its predecessors is an end of the trace). */ FOR_EACH_EDGE (e, ei, bb->succs) { if (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun) || bb_visited_trace (e->dest)) continue; if (bbd[e->dest->index].heap) { key = bb_to_key (e->dest); if (key != bbd[e->dest->index].node->key) { if (dump_file) { fprintf (dump_file, "Changing key for bb %d from %ld to %ld.\n", e->dest->index, (long) bbd[e->dest->index].node->key, key); } fibheap_replace_key (bbd[e->dest->index].heap, bbd[e->dest->index].node, key); } } } } fibheap_delete (*heap); /* "Return" the new heap. */ *heap = new_heap; } /* Create a duplicate of the basic block OLD_BB and redirect edge E to it, add it to trace after BB, mark OLD_BB visited and update pass' data structures (TRACE is a number of trace which OLD_BB is duplicated to). */ static basic_block copy_bb (basic_block old_bb, edge e, basic_block bb, int trace) { basic_block new_bb; new_bb = duplicate_block (old_bb, e, bb); BB_COPY_PARTITION (new_bb, old_bb); gcc_assert (e->dest == new_bb); if (dump_file) fprintf (dump_file, "Duplicated bb %d (created bb %d)\n", old_bb->index, new_bb->index); if (new_bb->index >= array_size || last_basic_block > array_size) { int i; int new_size; new_size = MAX (last_basic_block, new_bb->index + 1); new_size = GET_ARRAY_SIZE (new_size); bbd = XRESIZEVEC (bbro_basic_block_data, bbd, new_size); for (i = array_size; i < new_size; i++) { bbd[i].start_of_trace = -1; bbd[i].end_of_trace = -1; bbd[i].in_trace = -1; bbd[i].visited = 0; bbd[i].heap = NULL; bbd[i].node = NULL; } array_size = new_size; if (dump_file) { fprintf (dump_file, "Growing the dynamic array to %d elements.\n", array_size); } } gcc_assert (!bb_visited_trace (e->dest)); mark_bb_visited (new_bb, trace); new_bb->aux = bb->aux; bb->aux = new_bb; bbd[new_bb->index].in_trace = trace; return new_bb; } /* Compute and return the key (for the heap) of the basic block BB. */ static fibheapkey_t bb_to_key (basic_block bb) { edge e; edge_iterator ei; int priority = 0; /* Use index as key to align with its original order. */ if (optimize_function_for_size_p (cfun)) return bb->index; /* Do not start in probably never executed blocks. */ if (BB_PARTITION (bb) == BB_COLD_PARTITION || probably_never_executed_bb_p (cfun, bb)) return BB_FREQ_MAX; /* Prefer blocks whose predecessor is an end of some trace or whose predecessor edge is EDGE_DFS_BACK. */ FOR_EACH_EDGE (e, ei, bb->preds) { if ((e->src != ENTRY_BLOCK_PTR_FOR_FN (cfun) && bbd[e->src->index].end_of_trace >= 0) || (e->flags & EDGE_DFS_BACK)) { int edge_freq = EDGE_FREQUENCY (e); if (edge_freq > priority) priority = edge_freq; } } if (priority) /* The block with priority should have significantly lower key. */ return -(100 * BB_FREQ_MAX + 100 * priority + bb->frequency); return -bb->frequency; } /* Return true when the edge E from basic block BB is better than the temporary best edge (details are in function). The probability of edge E is PROB. The frequency of the successor is FREQ. The current best probability is BEST_PROB, the best frequency is BEST_FREQ. The edge is considered to be equivalent when PROB does not differ much from BEST_PROB; similarly for frequency. */ static bool better_edge_p (const_basic_block bb, const_edge e, int prob, int freq, int best_prob, int best_freq, const_edge cur_best_edge) { bool is_better_edge; /* The BEST_* values do not have to be best, but can be a bit smaller than maximum values. */ int diff_prob = best_prob / 10; int diff_freq = best_freq / 10; /* The smaller one is better to keep the original order. */ if (optimize_function_for_size_p (cfun)) return !cur_best_edge || cur_best_edge->dest->index > e->dest->index; if (prob > best_prob + diff_prob) /* The edge has higher probability than the temporary best edge. */ is_better_edge = true; else if (prob < best_prob - diff_prob) /* The edge has lower probability than the temporary best edge. */ is_better_edge = false; else if (freq < best_freq - diff_freq) /* The edge and the temporary best edge have almost equivalent probabilities. The higher frequency of a successor now means that there is another edge going into that successor. This successor has lower frequency so it is better. */ is_better_edge = true; else if (freq > best_freq + diff_freq) /* This successor has higher frequency so it is worse. */ is_better_edge = false; else if (e->dest->prev_bb == bb) /* The edges have equivalent probabilities and the successors have equivalent frequencies. Select the previous successor. */ is_better_edge = true; else is_better_edge = false; /* If we are doing hot/cold partitioning, make sure that we always favor non-crossing edges over crossing edges. */ if (!is_better_edge && flag_reorder_blocks_and_partition && cur_best_edge && (cur_best_edge->flags & EDGE_CROSSING) && !(e->flags & EDGE_CROSSING)) is_better_edge = true; return is_better_edge; } /* Return true when the edge E is better than the temporary best edge CUR_BEST_EDGE. If SRC_INDEX_P is true, the function compares the src bb of E and CUR_BEST_EDGE; otherwise it will compare the dest bb. BEST_LEN is the trace length of src (or dest) bb in CUR_BEST_EDGE. TRACES record the information about traces. When optimizing for size, the edge with smaller index is better. When optimizing for speed, the edge with bigger probability or longer trace is better. */ static bool connect_better_edge_p (const_edge e, bool src_index_p, int best_len, const_edge cur_best_edge, struct trace *traces) { int e_index; int b_index; bool is_better_edge; if (!cur_best_edge) return true; if (optimize_function_for_size_p (cfun)) { e_index = src_index_p ? e->src->index : e->dest->index; b_index = src_index_p ? cur_best_edge->src->index : cur_best_edge->dest->index; /* The smaller one is better to keep the original order. */ return b_index > e_index; } if (src_index_p) { e_index = e->src->index; if (e->probability > cur_best_edge->probability) /* The edge has higher probability than the temporary best edge. */ is_better_edge = true; else if (e->probability < cur_best_edge->probability) /* The edge has lower probability than the temporary best edge. */ is_better_edge = false; else if (traces[bbd[e_index].end_of_trace].length > best_len) /* The edge and the temporary best edge have equivalent probabilities. The edge with longer trace is better. */ is_better_edge = true; else is_better_edge = false; } else { e_index = e->dest->index; if (e->probability > cur_best_edge->probability) /* The edge has higher probability than the temporary best edge. */ is_better_edge = true; else if (e->probability < cur_best_edge->probability) /* The edge has lower probability than the temporary best edge. */ is_better_edge = false; else if (traces[bbd[e_index].start_of_trace].length > best_len) /* The edge and the temporary best edge have equivalent probabilities. The edge with longer trace is better. */ is_better_edge = true; else is_better_edge = false; } return is_better_edge; } /* Connect traces in array TRACES, N_TRACES is the count of traces. */ static void connect_traces (int n_traces, struct trace *traces) { int i; bool *connected; bool two_passes; int last_trace; int current_pass; int current_partition; int freq_threshold; gcov_type count_threshold; bool for_size = optimize_function_for_size_p (cfun); freq_threshold = max_entry_frequency * DUPLICATION_THRESHOLD / 1000; if (max_entry_count < INT_MAX / 1000) count_threshold = max_entry_count * DUPLICATION_THRESHOLD / 1000; else count_threshold = max_entry_count / 1000 * DUPLICATION_THRESHOLD; connected = XCNEWVEC (bool, n_traces); last_trace = -1; current_pass = 1; current_partition = BB_PARTITION (traces[0].first); two_passes = false; if (crtl->has_bb_partition) for (i = 0; i < n_traces && !two_passes; i++) if (BB_PARTITION (traces[0].first) != BB_PARTITION (traces[i].first)) two_passes = true; for (i = 0; i < n_traces || (two_passes && current_pass == 1) ; i++) { int t = i; int t2; edge e, best; int best_len; if (i >= n_traces) { gcc_assert (two_passes && current_pass == 1); i = 0; t = i; current_pass = 2; if (current_partition == BB_HOT_PARTITION) current_partition = BB_COLD_PARTITION; else current_partition = BB_HOT_PARTITION; } if (connected[t]) continue; if (two_passes && BB_PARTITION (traces[t].first) != current_partition) continue; connected[t] = true; /* Find the predecessor traces. */ for (t2 = t; t2 > 0;) { edge_iterator ei; best = NULL; best_len = 0; FOR_EACH_EDGE (e, ei, traces[t2].first->preds) { int si = e->src->index; if (e->src != ENTRY_BLOCK_PTR_FOR_FN (cfun) && (e->flags & EDGE_CAN_FALLTHRU) && !(e->flags & EDGE_COMPLEX) && bbd[si].end_of_trace >= 0 && !connected[bbd[si].end_of_trace] && (BB_PARTITION (e->src) == current_partition) && connect_better_edge_p (e, true, best_len, best, traces)) { best = e; best_len = traces[bbd[si].end_of_trace].length; } } if (best) { best->src->aux = best->dest; t2 = bbd[best->src->index].end_of_trace; connected[t2] = true; if (dump_file) { fprintf (dump_file, "Connection: %d %d\n", best->src->index, best->dest->index); } } else break; } if (last_trace >= 0) traces[last_trace].last->aux = traces[t2].first; last_trace = t; /* Find the successor traces. */ while (1) { /* Find the continuation of the chain. */ edge_iterator ei; best = NULL; best_len = 0; FOR_EACH_EDGE (e, ei, traces[t].last->succs) { int di = e->dest->index; if (e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun) && (e->flags & EDGE_CAN_FALLTHRU) && !(e->flags & EDGE_COMPLEX) && bbd[di].start_of_trace >= 0 && !connected[bbd[di].start_of_trace] && (BB_PARTITION (e->dest) == current_partition) && connect_better_edge_p (e, false, best_len, best, traces)) { best = e; best_len = traces[bbd[di].start_of_trace].length; } } if (for_size) { if (!best) /* Stop finding the successor traces. */ break; /* It is OK to connect block n with block n + 1 or a block before n. For others, only connect to the loop header. */ if (best->dest->index > (traces[t].last->index + 1)) { int count = EDGE_COUNT (best->dest->preds); FOR_EACH_EDGE (e, ei, best->dest->preds) if (e->flags & EDGE_DFS_BACK) count--; /* If dest has multiple predecessors, skip it. We expect that one predecessor with smaller index connects with it later. */ if (count != 1) break; } /* Only connect Trace n with Trace n + 1. It is conservative to keep the order as close as possible to the original order. It also helps to reduce long jumps. */ if (last_trace != bbd[best->dest->index].start_of_trace - 1) break; if (dump_file) fprintf (dump_file, "Connection: %d %d\n", best->src->index, best->dest->index); t = bbd[best->dest->index].start_of_trace; traces[last_trace].last->aux = traces[t].first; connected[t] = true; last_trace = t; } else if (best) { if (dump_file) { fprintf (dump_file, "Connection: %d %d\n", best->src->index, best->dest->index); } t = bbd[best->dest->index].start_of_trace; traces[last_trace].last->aux = traces[t].first; connected[t] = true; last_trace = t; } else { /* Try to connect the traces by duplication of 1 block. */ edge e2; basic_block next_bb = NULL; bool try_copy = false; FOR_EACH_EDGE (e, ei, traces[t].last->succs) if (e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun) && (e->flags & EDGE_CAN_FALLTHRU) && !(e->flags & EDGE_COMPLEX) && (!best || e->probability > best->probability)) { edge_iterator ei; edge best2 = NULL; int best2_len = 0; /* If the destination is a start of a trace which is only one block long, then no need to search the successor blocks of the trace. Accept it. */ if (bbd[e->dest->index].start_of_trace >= 0 && traces[bbd[e->dest->index].start_of_trace].length == 1) { best = e; try_copy = true; continue; } FOR_EACH_EDGE (e2, ei, e->dest->succs) { int di = e2->dest->index; if (e2->dest == EXIT_BLOCK_PTR_FOR_FN (cfun) || ((e2->flags & EDGE_CAN_FALLTHRU) && !(e2->flags & EDGE_COMPLEX) && bbd[di].start_of_trace >= 0 && !connected[bbd[di].start_of_trace] && BB_PARTITION (e2->dest) == current_partition && EDGE_FREQUENCY (e2) >= freq_threshold && e2->count >= count_threshold && (!best2 || e2->probability > best2->probability || (e2->probability == best2->probability && traces[bbd[di].start_of_trace].length > best2_len)))) { best = e; best2 = e2; if (e2->dest != EXIT_BLOCK_PTR_FOR_FN (cfun)) best2_len = traces[bbd[di].start_of_trace].length; else best2_len = INT_MAX; next_bb = e2->dest; try_copy = true; } } } if (crtl->has_bb_partition) try_copy = false; /* Copy tiny blocks always; copy larger blocks only when the edge is traversed frequently enough. */ if (try_copy && copy_bb_p (best->dest, optimize_edge_for_speed_p (best) && EDGE_FREQUENCY (best) >= freq_threshold && best->count >= count_threshold)) { basic_block new_bb; if (dump_file) { fprintf (dump_file, "Connection: %d %d ", traces[t].last->index, best->dest->index); if (!next_bb) fputc ('\n', dump_file); else if (next_bb == EXIT_BLOCK_PTR_FOR_FN (cfun)) fprintf (dump_file, "exit\n"); else fprintf (dump_file, "%d\n", next_bb->index); } new_bb = copy_bb (best->dest, best, traces[t].last, t); traces[t].last = new_bb; if (next_bb && next_bb != EXIT_BLOCK_PTR_FOR_FN (cfun)) { t = bbd[next_bb->index].start_of_trace; traces[last_trace].last->aux = traces[t].first; connected[t] = true; last_trace = t; } else break; /* Stop finding the successor traces. */ } else break; /* Stop finding the successor traces. */ } } } if (dump_file) { basic_block bb; fprintf (dump_file, "Final order:\n"); for (bb = traces[0].first; bb; bb = (basic_block) bb->aux) fprintf (dump_file, "%d ", bb->index); fprintf (dump_file, "\n"); fflush (dump_file); } FREE (connected); } /* Return true when BB can and should be copied. CODE_MAY_GROW is true when code size is allowed to grow by duplication. */ static bool copy_bb_p (const_basic_block bb, int code_may_grow) { int size = 0; int max_size = uncond_jump_length; rtx insn; if (!bb->frequency) return false; if (EDGE_COUNT (bb->preds) < 2) return false; if (!can_duplicate_block_p (bb)) return false; /* Avoid duplicating blocks which have many successors (PR/13430). */ if (EDGE_COUNT (bb->succs) > 8) return false; if (code_may_grow && optimize_bb_for_speed_p (bb)) max_size *= PARAM_VALUE (PARAM_MAX_GROW_COPY_BB_INSNS); FOR_BB_INSNS (bb, insn) { if (INSN_P (insn)) size += get_attr_min_length (insn); } if (size <= max_size) return true; if (dump_file) { fprintf (dump_file, "Block %d can't be copied because its size = %d.\n", bb->index, size); } return false; } /* Return the length of unconditional jump instruction. */ int get_uncond_jump_length (void) { rtx label, jump; int length; label = emit_label_before (gen_label_rtx (), get_insns ()); jump = emit_jump_insn (gen_jump (label)); length = get_attr_min_length (jump); delete_insn (jump); delete_insn (label); return length; } /* The landing pad OLD_LP, in block OLD_BB, has edges from both partitions. Duplicate the landing pad and split the edges so that no EH edge crosses partitions. */ static void fix_up_crossing_landing_pad (eh_landing_pad old_lp, basic_block old_bb) { eh_landing_pad new_lp; basic_block new_bb, last_bb, post_bb; rtx new_label, jump, post_label; unsigned new_partition; edge_iterator ei; edge e; /* Generate the new landing-pad structure. */ new_lp = gen_eh_landing_pad (old_lp->region); new_lp->post_landing_pad = old_lp->post_landing_pad; new_lp->landing_pad = gen_label_rtx (); LABEL_PRESERVE_P (new_lp->landing_pad) = 1; /* Put appropriate instructions in new bb. */ new_label = emit_label (new_lp->landing_pad); expand_dw2_landing_pad_for_region (old_lp->region); post_bb = BLOCK_FOR_INSN (old_lp->landing_pad); post_bb = single_succ (post_bb); post_label = block_label (post_bb); jump = emit_jump_insn (gen_jump (post_label)); JUMP_LABEL (jump) = post_label; /* Create new basic block to be dest for lp. */ last_bb = EXIT_BLOCK_PTR_FOR_FN (cfun)->prev_bb; new_bb = create_basic_block (new_label, jump, last_bb); new_bb->aux = last_bb->aux; last_bb->aux = new_bb; emit_barrier_after_bb (new_bb); make_edge (new_bb, post_bb, 0); /* Make sure new bb is in the other partition. */ new_partition = BB_PARTITION (old_bb); new_partition ^= BB_HOT_PARTITION | BB_COLD_PARTITION; BB_SET_PARTITION (new_bb, new_partition); /* Fix up the edges. */ for (ei = ei_start (old_bb->preds); (e = ei_safe_edge (ei)) != NULL; ) if (BB_PARTITION (e->src) == new_partition) { rtx insn = BB_END (e->src); rtx note = find_reg_note (insn, REG_EH_REGION, NULL_RTX); gcc_assert (note != NULL); gcc_checking_assert (INTVAL (XEXP (note, 0)) == old_lp->index); XEXP (note, 0) = GEN_INT (new_lp->index); /* Adjust the edge to the new destination. */ redirect_edge_succ (e, new_bb); } else ei_next (&ei); } /* Ensure that all hot bbs are included in a hot path through the procedure. This is done by calling this function twice, once with WALK_UP true (to look for paths from the entry to hot bbs) and once with WALK_UP false (to look for paths from hot bbs to the exit). Returns the updated value of COLD_BB_COUNT and adds newly-hot bbs to BBS_IN_HOT_PARTITION. */ static unsigned int sanitize_hot_paths (bool walk_up, unsigned int cold_bb_count, vec *bbs_in_hot_partition) { /* Callers check this. */ gcc_checking_assert (cold_bb_count); /* Keep examining hot bbs while we still have some left to check and there are remaining cold bbs. */ vec hot_bbs_to_check = bbs_in_hot_partition->copy (); while (! hot_bbs_to_check.is_empty () && cold_bb_count) { basic_block bb = hot_bbs_to_check.pop (); vec *edges = walk_up ? bb->preds : bb->succs; edge e; edge_iterator ei; int highest_probability = 0; int highest_freq = 0; gcov_type highest_count = 0; bool found = false; /* Walk the preds/succs and check if there is at least one already marked hot. Keep track of the most frequent pred/succ so that we can mark it hot if we don't find one. */ FOR_EACH_EDGE (e, ei, edges) { basic_block reach_bb = walk_up ? e->src : e->dest; if (e->flags & EDGE_DFS_BACK) continue; if (BB_PARTITION (reach_bb) != BB_COLD_PARTITION) { found = true; break; } /* The following loop will look for the hottest edge via the edge count, if it is non-zero, then fallback to the edge frequency and finally the edge probability. */ if (e->count > highest_count) highest_count = e->count; int edge_freq = EDGE_FREQUENCY (e); if (edge_freq > highest_freq) highest_freq = edge_freq; if (e->probability > highest_probability) highest_probability = e->probability; } /* If bb is reached by (or reaches, in the case of !WALK_UP) another hot block (or unpartitioned, e.g. the entry block) then it is ok. If not, then the most frequent pred (or succ) needs to be adjusted. In the case where multiple preds/succs have the same frequency (e.g. a 50-50 branch), then both will be adjusted. */ if (found) continue; FOR_EACH_EDGE (e, ei, edges) { if (e->flags & EDGE_DFS_BACK) continue; /* Select the hottest edge using the edge count, if it is non-zero, then fallback to the edge frequency and finally the edge probability. */ if (highest_count) { if (e->count < highest_count) continue; } else if (highest_freq) { if (EDGE_FREQUENCY (e) < highest_freq) continue; } else if (e->probability < highest_probability) continue; basic_block reach_bb = walk_up ? e->src : e->dest; /* We have a hot bb with an immediate dominator that is cold. The dominator needs to be re-marked hot. */ BB_SET_PARTITION (reach_bb, BB_HOT_PARTITION); cold_bb_count--; /* Now we need to examine newly-hot reach_bb to see if it is also dominated by a cold bb. */ bbs_in_hot_partition->safe_push (reach_bb); hot_bbs_to_check.safe_push (reach_bb); } } return cold_bb_count; } /* Find the basic blocks that are rarely executed and need to be moved to a separate section of the .o file (to cut down on paging and improve cache locality). Return a vector of all edges that cross. */ static vec find_rarely_executed_basic_blocks_and_crossing_edges (void) { vec crossing_edges = vNULL; basic_block bb; edge e; edge_iterator ei; unsigned int cold_bb_count = 0; vec bbs_in_hot_partition = vNULL; /* Mark which partition (hot/cold) each basic block belongs in. */ FOR_EACH_BB (bb) { bool cold_bb = false; if (probably_never_executed_bb_p (cfun, bb)) { /* Handle profile insanities created by upstream optimizations by also checking the incoming edge weights. If there is a non-cold incoming edge, conservatively prevent this block from being split into the cold section. */ cold_bb = true; FOR_EACH_EDGE (e, ei, bb->preds) if (!probably_never_executed_edge_p (cfun, e)) { cold_bb = false; break; } } if (cold_bb) { BB_SET_PARTITION (bb, BB_COLD_PARTITION); cold_bb_count++; } else { BB_SET_PARTITION (bb, BB_HOT_PARTITION); bbs_in_hot_partition.safe_push (bb); } } /* Ensure that hot bbs are included along a hot path from the entry to exit. Several different possibilities may include cold bbs along all paths to/from a hot bb. One is that there are edge weight insanities due to optimization phases that do not properly update basic block profile counts. The second is that the entry of the function may not be hot, because it is entered fewer times than the number of profile training runs, but there is a loop inside the function that causes blocks within the function to be above the threshold for hotness. This is fixed by walking up from hot bbs to the entry block, and then down from hot bbs to the exit, performing partitioning fixups as necessary. */ if (cold_bb_count) { mark_dfs_back_edges (); cold_bb_count = sanitize_hot_paths (true, cold_bb_count, &bbs_in_hot_partition); if (cold_bb_count) sanitize_hot_paths (false, cold_bb_count, &bbs_in_hot_partition); } /* The format of .gcc_except_table does not allow landing pads to be in a different partition as the throw. Fix this by either moving or duplicating the landing pads. */ if (cfun->eh->lp_array) { unsigned i; eh_landing_pad lp; FOR_EACH_VEC_ELT (*cfun->eh->lp_array, i, lp) { bool all_same, all_diff; if (lp == NULL || lp->landing_pad == NULL_RTX || !LABEL_P (lp->landing_pad)) continue; all_same = all_diff = true; bb = BLOCK_FOR_INSN (lp->landing_pad); FOR_EACH_EDGE (e, ei, bb->preds) { gcc_assert (e->flags & EDGE_EH); if (BB_PARTITION (bb) == BB_PARTITION (e->src)) all_diff = false; else all_same = false; } if (all_same) ; else if (all_diff) { int which = BB_PARTITION (bb); which ^= BB_HOT_PARTITION | BB_COLD_PARTITION; BB_SET_PARTITION (bb, which); } else fix_up_crossing_landing_pad (lp, bb); } } /* Mark every edge that crosses between sections. */ FOR_EACH_BB (bb) FOR_EACH_EDGE (e, ei, bb->succs) { unsigned int flags = e->flags; /* We should never have EDGE_CROSSING set yet. */ gcc_checking_assert ((flags & EDGE_CROSSING) == 0); if (e->src != ENTRY_BLOCK_PTR_FOR_FN (cfun) && e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun) && BB_PARTITION (e->src) != BB_PARTITION (e->dest)) { crossing_edges.safe_push (e); flags |= EDGE_CROSSING; } /* Now that we've split eh edges as appropriate, allow landing pads to be merged with the post-landing pads. */ flags &= ~EDGE_PRESERVE; e->flags = flags; } return crossing_edges; } /* Set the flag EDGE_CAN_FALLTHRU for edges that can be fallthru. */ static void set_edge_can_fallthru_flag (void) { basic_block bb; FOR_EACH_BB (bb) { edge e; edge_iterator ei; FOR_EACH_EDGE (e, ei, bb->succs) { e->flags &= ~EDGE_CAN_FALLTHRU; /* The FALLTHRU edge is also CAN_FALLTHRU edge. */ if (e->flags & EDGE_FALLTHRU) e->flags |= EDGE_CAN_FALLTHRU; } /* If the BB ends with an invertible condjump all (2) edges are CAN_FALLTHRU edges. */ if (EDGE_COUNT (bb->succs) != 2) continue; if (!any_condjump_p (BB_END (bb))) continue; if (!invert_jump (BB_END (bb), JUMP_LABEL (BB_END (bb)), 0)) continue; invert_jump (BB_END (bb), JUMP_LABEL (BB_END (bb)), 0); EDGE_SUCC (bb, 0)->flags |= EDGE_CAN_FALLTHRU; EDGE_SUCC (bb, 1)->flags |= EDGE_CAN_FALLTHRU; } } /* If any destination of a crossing edge does not have a label, add label; Convert any easy fall-through crossing edges to unconditional jumps. */ static void add_labels_and_missing_jumps (vec crossing_edges) { size_t i; edge e; FOR_EACH_VEC_ELT (crossing_edges, i, e) { basic_block src = e->src; basic_block dest = e->dest; rtx label, new_jump; if (dest == EXIT_BLOCK_PTR_FOR_FN (cfun)) continue; /* Make sure dest has a label. */ label = block_label (dest); /* Nothing to do for non-fallthru edges. */ if (src == ENTRY_BLOCK_PTR_FOR_FN (cfun)) continue; if ((e->flags & EDGE_FALLTHRU) == 0) continue; /* If the block does not end with a control flow insn, then we can trivially add a jump to the end to fixup the crossing. Otherwise the jump will have to go in a new bb, which will be handled by fix_up_fall_thru_edges function. */ if (control_flow_insn_p (BB_END (src))) continue; /* Make sure there's only one successor. */ gcc_assert (single_succ_p (src)); new_jump = emit_jump_insn_after (gen_jump (label), BB_END (src)); BB_END (src) = new_jump; JUMP_LABEL (new_jump) = label; LABEL_NUSES (label) += 1; emit_barrier_after_bb (src); /* Mark edge as non-fallthru. */ e->flags &= ~EDGE_FALLTHRU; } } /* Find any bb's where the fall-through edge is a crossing edge (note that these bb's must also contain a conditional jump or end with a call instruction; we've already dealt with fall-through edges for blocks that didn't have a conditional jump or didn't end with call instruction in the call to add_labels_and_missing_jumps). Convert the fall-through edge to non-crossing edge by inserting a new bb to fall-through into. The new bb will contain an unconditional jump (crossing edge) to the original fall through destination. */ static void fix_up_fall_thru_edges (void) { basic_block cur_bb; basic_block new_bb; edge succ1; edge succ2; edge fall_thru; edge cond_jump = NULL; edge e; bool cond_jump_crosses; int invert_worked; rtx old_jump; rtx fall_thru_label; FOR_EACH_BB (cur_bb) { fall_thru = NULL; if (EDGE_COUNT (cur_bb->succs) > 0) succ1 = EDGE_SUCC (cur_bb, 0); else succ1 = NULL; if (EDGE_COUNT (cur_bb->succs) > 1) succ2 = EDGE_SUCC (cur_bb, 1); else succ2 = NULL; /* Find the fall-through edge. */ if (succ1 && (succ1->flags & EDGE_FALLTHRU)) { fall_thru = succ1; cond_jump = succ2; } else if (succ2 && (succ2->flags & EDGE_FALLTHRU)) { fall_thru = succ2; cond_jump = succ1; } else if (succ1 && (block_ends_with_call_p (cur_bb) || can_throw_internal (BB_END (cur_bb)))) { edge e; edge_iterator ei; /* Find EDGE_CAN_FALLTHRU edge. */ FOR_EACH_EDGE (e, ei, cur_bb->succs) if (e->flags & EDGE_CAN_FALLTHRU) { fall_thru = e; break; } } if (fall_thru && (fall_thru->dest != EXIT_BLOCK_PTR_FOR_FN (cfun))) { /* Check to see if the fall-thru edge is a crossing edge. */ if (fall_thru->flags & EDGE_CROSSING) { /* The fall_thru edge crosses; now check the cond jump edge, if it exists. */ cond_jump_crosses = true; invert_worked = 0; old_jump = BB_END (cur_bb); /* Find the jump instruction, if there is one. */ if (cond_jump) { if (!(cond_jump->flags & EDGE_CROSSING)) cond_jump_crosses = false; /* We know the fall-thru edge crosses; if the cond jump edge does NOT cross, and its destination is the next block in the bb order, invert the jump (i.e. fix it so the fall through does not cross and the cond jump does). */ if (!cond_jump_crosses) { /* Find label in fall_thru block. We've already added any missing labels, so there must be one. */ fall_thru_label = block_label (fall_thru->dest); if (old_jump && JUMP_P (old_jump) && fall_thru_label) invert_worked = invert_jump (old_jump, fall_thru_label,0); if (invert_worked) { fall_thru->flags &= ~EDGE_FALLTHRU; cond_jump->flags |= EDGE_FALLTHRU; update_br_prob_note (cur_bb); e = fall_thru; fall_thru = cond_jump; cond_jump = e; cond_jump->flags |= EDGE_CROSSING; fall_thru->flags &= ~EDGE_CROSSING; } } } if (cond_jump_crosses || !invert_worked) { /* This is the case where both edges out of the basic block are crossing edges. Here we will fix up the fall through edge. The jump edge will be taken care of later. The EDGE_CROSSING flag of fall_thru edge is unset before the call to force_nonfallthru function because if a new basic-block is created this edge remains in the current section boundary while the edge between new_bb and the fall_thru->dest becomes EDGE_CROSSING. */ fall_thru->flags &= ~EDGE_CROSSING; new_bb = force_nonfallthru (fall_thru); if (new_bb) { new_bb->aux = cur_bb->aux; cur_bb->aux = new_bb; /* This is done by force_nonfallthru_and_redirect. */ gcc_assert (BB_PARTITION (new_bb) == BB_PARTITION (cur_bb)); single_succ_edge (new_bb)->flags |= EDGE_CROSSING; } else { /* If a new basic-block was not created; restore the EDGE_CROSSING flag. */ fall_thru->flags |= EDGE_CROSSING; } /* Add barrier after new jump */ emit_barrier_after_bb (new_bb ? new_bb : cur_bb); } } } } } /* This function checks the destination block of a "crossing jump" to see if it has any crossing predecessors that begin with a code label and end with an unconditional jump. If so, it returns that predecessor block. (This is to avoid creating lots of new basic blocks that all contain unconditional jumps to the same destination). */ static basic_block find_jump_block (basic_block jump_dest) { basic_block source_bb = NULL; edge e; rtx insn; edge_iterator ei; FOR_EACH_EDGE (e, ei, jump_dest->preds) if (e->flags & EDGE_CROSSING) { basic_block src = e->src; /* Check each predecessor to see if it has a label, and contains only one executable instruction, which is an unconditional jump. If so, we can use it. */ if (LABEL_P (BB_HEAD (src))) for (insn = BB_HEAD (src); !INSN_P (insn) && insn != NEXT_INSN (BB_END (src)); insn = NEXT_INSN (insn)) { if (INSN_P (insn) && insn == BB_END (src) && JUMP_P (insn) && !any_condjump_p (insn)) { source_bb = src; break; } } if (source_bb) break; } return source_bb; } /* Find all BB's with conditional jumps that are crossing edges; insert a new bb and make the conditional jump branch to the new bb instead (make the new bb same color so conditional branch won't be a 'crossing' edge). Insert an unconditional jump from the new bb to the original destination of the conditional jump. */ static void fix_crossing_conditional_branches (void) { basic_block cur_bb; basic_block new_bb; basic_block dest; edge succ1; edge succ2; edge crossing_edge; edge new_edge; rtx old_jump; rtx set_src; rtx old_label = NULL_RTX; rtx new_label; FOR_EACH_BB (cur_bb) { crossing_edge = NULL; if (EDGE_COUNT (cur_bb->succs) > 0) succ1 = EDGE_SUCC (cur_bb, 0); else succ1 = NULL; if (EDGE_COUNT (cur_bb->succs) > 1) succ2 = EDGE_SUCC (cur_bb, 1); else succ2 = NULL; /* We already took care of fall-through edges, so only one successor can be a crossing edge. */ if (succ1 && (succ1->flags & EDGE_CROSSING)) crossing_edge = succ1; else if (succ2 && (succ2->flags & EDGE_CROSSING)) crossing_edge = succ2; if (crossing_edge) { old_jump = BB_END (cur_bb); /* Check to make sure the jump instruction is a conditional jump. */ set_src = NULL_RTX; if (any_condjump_p (old_jump)) { if (GET_CODE (PATTERN (old_jump)) == SET) set_src = SET_SRC (PATTERN (old_jump)); else if (GET_CODE (PATTERN (old_jump)) == PARALLEL) { set_src = XVECEXP (PATTERN (old_jump), 0,0); if (GET_CODE (set_src) == SET) set_src = SET_SRC (set_src); else set_src = NULL_RTX; } } if (set_src && (GET_CODE (set_src) == IF_THEN_ELSE)) { if (GET_CODE (XEXP (set_src, 1)) == PC) old_label = XEXP (set_src, 2); else if (GET_CODE (XEXP (set_src, 2)) == PC) old_label = XEXP (set_src, 1); /* Check to see if new bb for jumping to that dest has already been created; if so, use it; if not, create a new one. */ new_bb = find_jump_block (crossing_edge->dest); if (new_bb) new_label = block_label (new_bb); else { basic_block last_bb; rtx new_jump; /* Create new basic block to be dest for conditional jump. */ /* Put appropriate instructions in new bb. */ new_label = gen_label_rtx (); emit_label (new_label); gcc_assert (GET_CODE (old_label) == LABEL_REF); old_label = JUMP_LABEL (old_jump); new_jump = emit_jump_insn (gen_jump (old_label)); JUMP_LABEL (new_jump) = old_label; last_bb = EXIT_BLOCK_PTR_FOR_FN (cfun)->prev_bb; new_bb = create_basic_block (new_label, new_jump, last_bb); new_bb->aux = last_bb->aux; last_bb->aux = new_bb; emit_barrier_after_bb (new_bb); /* Make sure new bb is in same partition as source of conditional branch. */ BB_COPY_PARTITION (new_bb, cur_bb); } /* Make old jump branch to new bb. */ redirect_jump (old_jump, new_label, 0); /* Remove crossing_edge as predecessor of 'dest'. */ dest = crossing_edge->dest; redirect_edge_succ (crossing_edge, new_bb); /* Make a new edge from new_bb to old dest; new edge will be a successor for new_bb and a predecessor for 'dest'. */ if (EDGE_COUNT (new_bb->succs) == 0) new_edge = make_edge (new_bb, dest, 0); else new_edge = EDGE_SUCC (new_bb, 0); crossing_edge->flags &= ~EDGE_CROSSING; new_edge->flags |= EDGE_CROSSING; } } } } /* Find any unconditional branches that cross between hot and cold sections. Convert them into indirect jumps instead. */ static void fix_crossing_unconditional_branches (void) { basic_block cur_bb; rtx last_insn; rtx label; rtx label_addr; rtx indirect_jump_sequence; rtx jump_insn = NULL_RTX; rtx new_reg; rtx cur_insn; edge succ; FOR_EACH_BB (cur_bb) { last_insn = BB_END (cur_bb); if (EDGE_COUNT (cur_bb->succs) < 1) continue; succ = EDGE_SUCC (cur_bb, 0); /* Check to see if bb ends in a crossing (unconditional) jump. At this point, no crossing jumps should be conditional. */ if (JUMP_P (last_insn) && (succ->flags & EDGE_CROSSING)) { gcc_assert (!any_condjump_p (last_insn)); /* Make sure the jump is not already an indirect or table jump. */ if (!computed_jump_p (last_insn) && !tablejump_p (last_insn, NULL, NULL)) { /* We have found a "crossing" unconditional branch. Now we must convert it to an indirect jump. First create reference of label, as target for jump. */ label = JUMP_LABEL (last_insn); label_addr = gen_rtx_LABEL_REF (Pmode, label); LABEL_NUSES (label) += 1; /* Get a register to use for the indirect jump. */ new_reg = gen_reg_rtx (Pmode); /* Generate indirect the jump sequence. */ start_sequence (); emit_move_insn (new_reg, label_addr); emit_indirect_jump (new_reg); indirect_jump_sequence = get_insns (); end_sequence (); /* Make sure every instruction in the new jump sequence has its basic block set to be cur_bb. */ for (cur_insn = indirect_jump_sequence; cur_insn; cur_insn = NEXT_INSN (cur_insn)) { if (!BARRIER_P (cur_insn)) BLOCK_FOR_INSN (cur_insn) = cur_bb; if (JUMP_P (cur_insn)) jump_insn = cur_insn; } /* Insert the new (indirect) jump sequence immediately before the unconditional jump, then delete the unconditional jump. */ emit_insn_before (indirect_jump_sequence, last_insn); delete_insn (last_insn); /* Make BB_END for cur_bb be the jump instruction (NOT the barrier instruction at the end of the sequence...). */ BB_END (cur_bb) = jump_insn; } } } } /* Add REG_CROSSING_JUMP note to all crossing jump insns. */ static void add_reg_crossing_jump_notes (void) { basic_block bb; edge e; edge_iterator ei; FOR_EACH_BB (bb) FOR_EACH_EDGE (e, ei, bb->succs) if ((e->flags & EDGE_CROSSING) && JUMP_P (BB_END (e->src)) /* Some notes were added during fix_up_fall_thru_edges, via force_nonfallthru_and_redirect. */ && !find_reg_note (BB_END (e->src), REG_CROSSING_JUMP, NULL_RTX)) add_reg_note (BB_END (e->src), REG_CROSSING_JUMP, NULL_RTX); } /* Reorder basic blocks. The main entry point to this file. FLAGS is the set of flags to pass to cfg_layout_initialize(). */ static void reorder_basic_blocks (void) { int n_traces; int i; struct trace *traces; gcc_assert (current_ir_type () == IR_RTL_CFGLAYOUT); if (n_basic_blocks_for_fn (cfun) <= NUM_FIXED_BLOCKS + 1) return; set_edge_can_fallthru_flag (); mark_dfs_back_edges (); /* We are estimating the length of uncond jump insn only once since the code for getting the insn length always returns the minimal length now. */ if (uncond_jump_length == 0) uncond_jump_length = get_uncond_jump_length (); /* We need to know some information for each basic block. */ array_size = GET_ARRAY_SIZE (last_basic_block); bbd = XNEWVEC (bbro_basic_block_data, array_size); for (i = 0; i < array_size; i++) { bbd[i].start_of_trace = -1; bbd[i].end_of_trace = -1; bbd[i].in_trace = -1; bbd[i].visited = 0; bbd[i].heap = NULL; bbd[i].node = NULL; } traces = XNEWVEC (struct trace, n_basic_blocks_for_fn (cfun)); n_traces = 0; find_traces (&n_traces, traces); connect_traces (n_traces, traces); FREE (traces); FREE (bbd); relink_block_chain (/*stay_in_cfglayout_mode=*/true); if (dump_file) { if (dump_flags & TDF_DETAILS) dump_reg_info (dump_file); dump_flow_info (dump_file, dump_flags); } /* Signal that rtl_verify_flow_info_1 can now verify that there is at most one switch between hot/cold sections. */ crtl->bb_reorder_complete = true; } /* Determine which partition the first basic block in the function belongs to, then find the first basic block in the current function that belongs to a different section, and insert a NOTE_INSN_SWITCH_TEXT_SECTIONS note immediately before it in the instruction stream. When writing out the assembly code, encountering this note will make the compiler switch between the hot and cold text sections. */ void insert_section_boundary_note (void) { basic_block bb; bool switched_sections = false; int current_partition = 0; if (!crtl->has_bb_partition) return; FOR_EACH_BB (bb) { if (!current_partition) current_partition = BB_PARTITION (bb); if (BB_PARTITION (bb) != current_partition) { gcc_assert (!switched_sections); switched_sections = true; emit_note_before (NOTE_INSN_SWITCH_TEXT_SECTIONS, BB_HEAD (bb)); current_partition = BB_PARTITION (bb); } } } static bool gate_handle_reorder_blocks (void) { if (targetm.cannot_modify_jumps_p ()) return false; return (optimize > 0 && (flag_reorder_blocks || flag_reorder_blocks_and_partition)); } static unsigned int rest_of_handle_reorder_blocks (void) { basic_block bb; /* Last attempt to optimize CFG, as scheduling, peepholing and insn splitting possibly introduced more crossjumping opportunities. */ cfg_layout_initialize (CLEANUP_EXPENSIVE); reorder_basic_blocks (); cleanup_cfg (CLEANUP_EXPENSIVE); FOR_EACH_BB (bb) if (bb->next_bb != EXIT_BLOCK_PTR_FOR_FN (cfun)) bb->aux = bb->next_bb; cfg_layout_finalize (); return 0; } namespace { const pass_data pass_data_reorder_blocks = { RTL_PASS, /* type */ "bbro", /* name */ OPTGROUP_NONE, /* optinfo_flags */ true, /* has_gate */ true, /* has_execute */ TV_REORDER_BLOCKS, /* tv_id */ 0, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ TODO_verify_rtl_sharing, /* todo_flags_finish */ }; class pass_reorder_blocks : public rtl_opt_pass { public: pass_reorder_blocks (gcc::context *ctxt) : rtl_opt_pass (pass_data_reorder_blocks, ctxt) {} /* opt_pass methods: */ bool gate () { return gate_handle_reorder_blocks (); } unsigned int execute () { return rest_of_handle_reorder_blocks (); } }; // class pass_reorder_blocks } // anon namespace rtl_opt_pass * make_pass_reorder_blocks (gcc::context *ctxt) { return new pass_reorder_blocks (ctxt); } /* Duplicate the blocks containing computed gotos. This basically unfactors computed gotos that were factored early on in the compilation process to speed up edge based data flow. We used to not unfactoring them again, which can seriously pessimize code with many computed jumps in the source code, such as interpreters. See e.g. PR15242. */ static bool gate_duplicate_computed_gotos (void) { if (targetm.cannot_modify_jumps_p ()) return false; return (optimize > 0 && flag_expensive_optimizations && ! optimize_function_for_size_p (cfun)); } static unsigned int duplicate_computed_gotos (void) { basic_block bb, new_bb; bitmap candidates; int max_size; if (n_basic_blocks_for_fn (cfun) <= NUM_FIXED_BLOCKS + 1) return 0; clear_bb_flags (); cfg_layout_initialize (0); /* We are estimating the length of uncond jump insn only once since the code for getting the insn length always returns the minimal length now. */ if (uncond_jump_length == 0) uncond_jump_length = get_uncond_jump_length (); max_size = uncond_jump_length * PARAM_VALUE (PARAM_MAX_GOTO_DUPLICATION_INSNS); candidates = BITMAP_ALLOC (NULL); /* Look for blocks that end in a computed jump, and see if such blocks are suitable for unfactoring. If a block is a candidate for unfactoring, mark it in the candidates. */ FOR_EACH_BB (bb) { rtx insn; edge e; edge_iterator ei; int size, all_flags; /* Build the reorder chain for the original order of blocks. */ if (bb->next_bb != EXIT_BLOCK_PTR_FOR_FN (cfun)) bb->aux = bb->next_bb; /* Obviously the block has to end in a computed jump. */ if (!computed_jump_p (BB_END (bb))) continue; /* Only consider blocks that can be duplicated. */ if (find_reg_note (BB_END (bb), REG_CROSSING_JUMP, NULL_RTX) || !can_duplicate_block_p (bb)) continue; /* Make sure that the block is small enough. */ size = 0; FOR_BB_INSNS (bb, insn) if (INSN_P (insn)) { size += get_attr_min_length (insn); if (size > max_size) break; } if (size > max_size) continue; /* Final check: there must not be any incoming abnormal edges. */ all_flags = 0; FOR_EACH_EDGE (e, ei, bb->preds) all_flags |= e->flags; if (all_flags & EDGE_COMPLEX) continue; bitmap_set_bit (candidates, bb->index); } /* Nothing to do if there is no computed jump here. */ if (bitmap_empty_p (candidates)) goto done; /* Duplicate computed gotos. */ FOR_EACH_BB (bb) { if (bb->flags & BB_VISITED) continue; bb->flags |= BB_VISITED; /* BB must have one outgoing edge. That edge must not lead to the exit block or the next block. The destination must have more than one predecessor. */ if (!single_succ_p (bb) || single_succ (bb) == EXIT_BLOCK_PTR_FOR_FN (cfun) || single_succ (bb) == bb->next_bb || single_pred_p (single_succ (bb))) continue; /* The successor block has to be a duplication candidate. */ if (!bitmap_bit_p (candidates, single_succ (bb)->index)) continue; /* Don't duplicate a partition crossing edge, which requires difficult fixup. */ if (find_reg_note (BB_END (bb), REG_CROSSING_JUMP, NULL_RTX)) continue; new_bb = duplicate_block (single_succ (bb), single_succ_edge (bb), bb); new_bb->aux = bb->aux; bb->aux = new_bb; new_bb->flags |= BB_VISITED; } done: cfg_layout_finalize (); BITMAP_FREE (candidates); return 0; } namespace { const pass_data pass_data_duplicate_computed_gotos = { RTL_PASS, /* type */ "compgotos", /* name */ OPTGROUP_NONE, /* optinfo_flags */ true, /* has_gate */ true, /* has_execute */ TV_REORDER_BLOCKS, /* tv_id */ 0, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ TODO_verify_rtl_sharing, /* todo_flags_finish */ }; class pass_duplicate_computed_gotos : public rtl_opt_pass { public: pass_duplicate_computed_gotos (gcc::context *ctxt) : rtl_opt_pass (pass_data_duplicate_computed_gotos, ctxt) {} /* opt_pass methods: */ bool gate () { return gate_duplicate_computed_gotos (); } unsigned int execute () { return duplicate_computed_gotos (); } }; // class pass_duplicate_computed_gotos } // anon namespace rtl_opt_pass * make_pass_duplicate_computed_gotos (gcc::context *ctxt) { return new pass_duplicate_computed_gotos (ctxt); } static bool gate_handle_partition_blocks (void) { /* The optimization to partition hot/cold basic blocks into separate sections of the .o file does not work well with linkonce or with user defined section attributes. Don't call it if either case arises. */ return (flag_reorder_blocks_and_partition && optimize /* See gate_handle_reorder_blocks. We should not partition if we are going to omit the reordering. */ && optimize_function_for_speed_p (cfun) && !DECL_ONE_ONLY (current_function_decl) && !user_defined_section_attribute); } /* This function is the main 'entrance' for the optimization that partitions hot and cold basic blocks into separate sections of the .o file (to improve performance and cache locality). Ideally it would be called after all optimizations that rearrange the CFG have been called. However part of this optimization may introduce new register usage, so it must be called before register allocation has occurred. This means that this optimization is actually called well before the optimization that reorders basic blocks (see function above). This optimization checks the feedback information to determine which basic blocks are hot/cold, updates flags on the basic blocks to indicate which section they belong in. This information is later used for writing out sections in the .o file. Because hot and cold sections can be arbitrarily large (within the bounds of memory), far beyond the size of a single function, it is necessary to fix up all edges that cross section boundaries, to make sure the instructions used can actually span the required distance. The fixes are described below. Fall-through edges must be changed into jumps; it is not safe or legal to fall through across a section boundary. Whenever a fall-through edge crossing a section boundary is encountered, a new basic block is inserted (in the same section as the fall-through source), and the fall through edge is redirected to the new basic block. The new basic block contains an unconditional jump to the original fall-through target. (If the unconditional jump is insufficient to cross section boundaries, that is dealt with a little later, see below). In order to deal with architectures that have short conditional branches (which cannot span all of memory) we take any conditional jump that attempts to cross a section boundary and add a level of indirection: it becomes a conditional jump to a new basic block, in the same section. The new basic block contains an unconditional jump to the original target, in the other section. For those architectures whose unconditional branch is also incapable of reaching all of memory, those unconditional jumps are converted into indirect jumps, through a register. IMPORTANT NOTE: This optimization causes some messy interactions with the cfg cleanup optimizations; those optimizations want to merge blocks wherever possible, and to collapse indirect jump sequences (change "A jumps to B jumps to C" directly into "A jumps to C"). Those optimizations can undo the jump fixes that partitioning is required to make (see above), in order to ensure that jumps attempting to cross section boundaries are really able to cover whatever distance the jump requires (on many architectures conditional or unconditional jumps are not able to reach all of memory). Therefore tests have to be inserted into each such optimization to make sure that it does not undo stuff necessary to cross partition boundaries. This would be much less of a problem if we could perform this optimization later in the compilation, but unfortunately the fact that we may need to create indirect jumps (through registers) requires that this optimization be performed before register allocation. Hot and cold basic blocks are partitioned and put in separate sections of the .o file, to reduce paging and improve cache performance (hopefully). This can result in bits of code from the same function being widely separated in the .o file. However this is not obvious to the current bb structure. Therefore we must take care to ensure that: 1). There are no fall_thru edges that cross between sections; 2). For those architectures which have "short" conditional branches, all conditional branches that attempt to cross between sections are converted to unconditional branches; and, 3). For those architectures which have "short" unconditional branches, all unconditional branches that attempt to cross between sections are converted to indirect jumps. The code for fixing up fall_thru edges that cross between hot and cold basic blocks does so by creating new basic blocks containing unconditional branches to the appropriate label in the "other" section. The new basic block is then put in the same (hot or cold) section as the original conditional branch, and the fall_thru edge is modified to fall into the new basic block instead. By adding this level of indirection we end up with only unconditional branches crossing between hot and cold sections. Conditional branches are dealt with by adding a level of indirection. A new basic block is added in the same (hot/cold) section as the conditional branch, and the conditional branch is retargeted to the new basic block. The new basic block contains an unconditional branch to the original target of the conditional branch (in the other section). Unconditional branches are dealt with by converting them into indirect jumps. */ static unsigned partition_hot_cold_basic_blocks (void) { vec crossing_edges; if (n_basic_blocks_for_fn (cfun) <= NUM_FIXED_BLOCKS + 1) return 0; df_set_flags (DF_DEFER_INSN_RESCAN); crossing_edges = find_rarely_executed_basic_blocks_and_crossing_edges (); if (!crossing_edges.exists ()) return 0; crtl->has_bb_partition = true; /* Make sure the source of any crossing edge ends in a jump and the destination of any crossing edge has a label. */ add_labels_and_missing_jumps (crossing_edges); /* Convert all crossing fall_thru edges to non-crossing fall thrus to unconditional jumps (that jump to the original fall through dest). */ fix_up_fall_thru_edges (); /* If the architecture does not have conditional branches that can span all of memory, convert crossing conditional branches into crossing unconditional branches. */ if (!HAS_LONG_COND_BRANCH) fix_crossing_conditional_branches (); /* If the architecture does not have unconditional branches that can span all of memory, convert crossing unconditional branches into indirect jumps. Since adding an indirect jump also adds a new register usage, update the register usage information as well. */ if (!HAS_LONG_UNCOND_BRANCH) fix_crossing_unconditional_branches (); add_reg_crossing_jump_notes (); /* Clear bb->aux fields that the above routines were using. */ clear_aux_for_blocks (); crossing_edges.release (); /* ??? FIXME: DF generates the bb info for a block immediately. And by immediately, I mean *during* creation of the block. #0 df_bb_refs_collect #1 in df_bb_refs_record #2 in create_basic_block_structure Which means that the bb_has_eh_pred test in df_bb_refs_collect will *always* fail, because no edges can have been added to the block yet. Which of course means we don't add the right artificial refs, which means we fail df_verify (much) later. Cleanest solution would seem to make DF_DEFER_INSN_RESCAN imply that we also shouldn't grab data from the new blocks those new insns are in either. In this way one can create the block, link it up properly, and have everything Just Work later, when deferred insns are processed. In the meantime, we have no other option but to throw away all of the DF data and recompute it all. */ if (cfun->eh->lp_array) { df_finish_pass (true); df_scan_alloc (NULL); df_scan_blocks (); /* Not all post-landing pads use all of the EH_RETURN_DATA_REGNO data. We blindly generated all of them when creating the new landing pad. Delete those assignments we don't use. */ df_set_flags (DF_LR_RUN_DCE); df_analyze (); } return TODO_verify_flow | TODO_verify_rtl_sharing; } namespace { const pass_data pass_data_partition_blocks = { RTL_PASS, /* type */ "bbpart", /* name */ OPTGROUP_NONE, /* optinfo_flags */ true, /* has_gate */ true, /* has_execute */ TV_REORDER_BLOCKS, /* tv_id */ PROP_cfglayout, /* properties_required */ 0, /* properties_provided */ 0, /* properties_destroyed */ 0, /* todo_flags_start */ 0, /* todo_flags_finish */ }; class pass_partition_blocks : public rtl_opt_pass { public: pass_partition_blocks (gcc::context *ctxt) : rtl_opt_pass (pass_data_partition_blocks, ctxt) {} /* opt_pass methods: */ bool gate () { return gate_handle_partition_blocks (); } unsigned int execute () { return partition_hot_cold_basic_blocks (); } }; // class pass_partition_blocks } // anon namespace rtl_opt_pass * make_pass_partition_blocks (gcc::context *ctxt) { return new pass_partition_blocks (ctxt); }