/* Automatically generated by po2tbl.sed from gcc.pot.  */

#if HAVE_CONFIG_H
# include <config.h>
#endif

#include "libgettext.h"

const struct _msg_ent _msg_tbl[] = {
  {"", 1},
  {"offset outside bounds of constant string", 2},
  {"__builtin_saveregs not supported by this target", 3},
  {"argument of `__builtin_args_info' must be constant", 4},
  {"argument of `__builtin_args_info' out of range", 5},
  {"missing argument in `__builtin_args_info'", 6},
  {"`va_start' used in function with fixed args", 7},
  {"second parameter of `va_start' not last named argument", 8},
  {"`__builtin_next_arg' called without an argument", 9},
  {"too many arguments to function `va_start'", 10},
  {"first argument to `va_arg' not of type `va_list'", 11},
  {"`%s' is promoted to `%s' when passed through `...'", 12},
  {"(so you should pass `%s' not `%s' to `va_arg')", 13},
  {"invalid arg to `__builtin_frame_address'", 14},
  {"invalid arg to `__builtin_return_address'", 15},
  {"unsupported arg to `__builtin_frame_address'", 16},
  {"unsupported arg to `__builtin_return_address'", 17},
  {"second arg to `__builtin_expect' must be a constant", 18},
  {"__builtin_longjmp second argument must be 1", 19},
  {"__builtin_trap not supported by this target", 20},
  {"built-in function `%s' not currently supported", 21},
  {"\
string length `%d' is greater than the minimum length `%d' ISO C%d is \
required to support", 22},
  {"`%s' attribute directive ignored", 23},
  {"`%s' attribute does not apply to types", 24},
  {"wrong number of arguments specified for `%s' attribute", 25},
  {"`%s' attribute ignored", 26},
  {"unknown machine mode `%s'", 27},
  {"no data type for mode `%s'", 28},
  {"section attribute cannot be specified for local variables", 29},
  {"section of `%s' conflicts with previous declaration", 30},
  {"section attribute not allowed for `%s'", 31},
  {"section attributes are not supported for this target", 32},
  {"requested alignment is not a constant", 33},
  {"requested alignment is not a power of 2", 34},
  {"requested alignment is too large", 35},
  {"alignment may not be specified for `%s'", 36},
  {"argument format specified for non-function `%s'", 37},
  {"unrecognized format specifier", 38},
  {"`%s' is an unrecognized format function type", 39},
  {"format string has invalid operand number", 40},
  {"format string arg follows the args to be formatted", 41},
  {"format string arg not a string type", 42},
  {"args to be formatted is not '...'", 43},
  {"function does not return string type", 44},
  {"`%s' defined both normally and as an alias", 45},
  {"alias arg not a string", 46},
  {"`%s' attribute applies only to functions", 47},
  {"can't set `%s' attribute after definition", 48},
  {"too few arguments for format", 49},
  {"missing $ operand number in format", 50},
  {"ISO C does not support %%n$ operand number formats", 51},
  {"operand number out of range in format", 52},
  {"format argument %d unused before used argument %d in $-style format", 53},
  {"unused arguments in $-style format", 54},
  {"null format string", 55},
  {"format not a string literal, argument types not checked", 56},
  {"zero-length format string", 57},
  {"unterminated format string", 58},
  {"embedded `\\0' in format", 59},
  {"too many arguments for format", 60},
  {"spurious trailing `%%' in format", 61},
  {"zero width in scanf format", 62},
  {"ISO C does not support the strftime `%c' flag", 63},
  {"repeated `%c' flag in format", 64},
  {"ISO C does not support strftime format width", 65},
  {"multiple E/O modifiers in format", 66},
  {"use of both ` ' and `+' flags in format", 67},
  {"use of both `0' and `-' flags in format", 68},
  {"ISO C does not support the `'' format flag", 69},
  {"ISO C does not support the `I' format flag", 70},
  {"field width is not type int (arg %d)", 71},
  {"field precision is not type int (arg %d)", 72},
  {"ISO C does not support the `%s' %s length modifier", 73},
  {"ISO C89 does not support the `%s' %s length modifier", 74},
  {"use of `*' and `%s' together in format", 75},
  {"conversion lacks type at end of format", 76},
  {"unknown conversion type character `%c' in format", 77},
  {"unknown conversion type character 0x%x in format", 78},
  {"ISO C does not support the `%%%c' %s format", 79},
  {"ISO C89 does not support the `%%%c' %s format", 80},
  {"ISO C does not support `%%O%c'", 81},
  {"ISO C89 does not support `%%O%c'", 82},
  {"ISO C89 does not support `%%E%c'", 83},
  {"width used with `%c' format", 84},
  {"`%%%c' yields only last 2 digits of year in some locales", 85},
  {"`%%%c' yields only last 2 digits of year", 86},
  {"precision used with `%c' format", 87},
  {"`a' flag used with `%c' format", 88},
  {"ISO C does not support the `a' flag", 89},
  {"no closing `]' for `%%[' format", 90},
  {"suppression of `%c' conversion in format", 91},
  {"flag `%c' used with type `%c'", 92},
  {"`0' flag ignored with precision specifier and `%c' format", 93},
  {"use of `%s' length modifier with `%c' type character", 94},
  {"ISO C does not support the `%%%s%c' %s format", 95},
  {"ISO C89 does not support the `%%%s%c' %s format", 96},
  {"writing into constant object (arg %d)", 97},
  {"extra type qualifiers in format argument (arg %d)", 98},
  {"format argument is not a pointer (arg %d)", 99},
  {"format argument is not a pointer to a pointer (arg %d)", 100},
  {"%s format, %s arg (arg %d)", 101},
  {"overflow in constant expression", 102},
  {"integer overflow in expression", 103},
  {"floating point overflow in expression", 104},
  {"large integer implicitly truncated to unsigned type", 105},
  {"negative integer implicitly converted to unsigned type", 106},
  {"overflow in implicit constant conversion", 107},
  {"expression statement has incomplete type", 108},
  {"case label does not reduce to an integer constant", 109},
  {"invalid truth-value expression", 110},
  {"invalid operands to binary %s", 111},
  {"comparison is always false due to limited range of data type", 112},
  {"comparison is always true due to limited range of data type", 113},
  {"comparison of unsigned expression >= 0 is always true", 114},
  {"comparison of unsigned expression < 0 is always false", 115},
  {"struct type value used where scalar is required", 116},
  {"union type value used where scalar is required", 117},
  {"array type value used where scalar is required", 118},
  {"suggest parentheses around assignment used as truth value", 119},
  {"invalid use of `restrict'", 120},
  {"too few arguments to function `%s'", 121},
  {"too many arguments to function `%s'", 122},
  {"void value not ignored as it ought to be", 123},
  {"conversion to non-scalar type requested", 124},
  {"unknown C standard `%s'", 125},
  {"array `%s' assumed to have one element", 126},
  {"`struct %s' incomplete in scope ending here", 127},
  {"`union %s' incomplete in scope ending here", 128},
  {"`enum %s' incomplete in scope ending here", 129},
  {"label `%s' used but not defined", 130},
  {"label `%s' defined but not used", 131},
  {"shadowing built-in function `%s'", 132},
  {"shadowing library function `%s'", 133},
  {"library function `%s' declared as non-function", 134},
  {"built-in function `%s' declared as non-function", 135},
  {"`%s' redeclared as different kind of symbol", 136},
  {"previous declaration of `%s'", 137},
  {"conflicting types for built-in function `%s'", 138},
  {"conflicting types for `%s'", 139},
  {"\
A parameter list with an ellipsis can't match an empty parameter name list \
declaration.", 140},
  {"\
An argument type that has a default promotion can't match an empty parameter \
name list declaration.", 141},
  {"redefinition of `%s'", 142},
  {"redeclaration of `%s'", 143},
  {"conflicting declarations of `%s'", 144},
  {"`%s' previously defined here", 145},
  {"`%s' previously declared here", 146},
  {"prototype for `%s' follows", 147},
  {"non-prototype definition here", 148},
  {"prototype for `%s' follows and number of arguments doesn't match", 149},
  {"prototype for `%s' follows and argument %d doesn't match", 150},
  {"`%s' declared inline after being called", 151},
  {"`%s' declared inline after its definition", 152},
  {"static declaration for `%s' follows non-static", 153},
  {"non-static declaration for `%s' follows static", 154},
  {"const declaration for `%s' follows non-const", 155},
  {"type qualifiers for `%s' conflict with previous decl", 156},
  {"redundant redeclaration of `%s' in same scope", 157},
  {"nested extern declaration of `%s'", 158},
  {"`%s' used prior to declaration", 159},
  {"`%s' was declared implicitly `extern' and later `static'", 160},
  {"type mismatch with previous external decl", 161},
  {"previous external decl of `%s'", 162},
  {"type mismatch with previous implicit declaration", 163},
  {"previous implicit declaration of `%s'", 164},
  {"type of external `%s' is not global", 165},
  {"`%s' was previously implicitly declared to return `int'", 166},
  {"`%s' was declared `extern' and later `static'", 167},
  {"extern declaration of `%s' doesn't match global one", 168},
  {"`%s' locally external but globally static", 169},
  {"declaration of `%s' shadows a parameter", 170},
  {"declaration of `%s' shadows a symbol from the parameter list", 171},
  {"declaration of `%s' shadows previous local", 172},
  {"declaration of `%s' shadows global declaration", 173},
  {"function `%s' was previously declared within a block", 174},
  {"implicit declaration of function `%s'", 175},
  {"label %s referenced outside of any function", 176},
  {"duplicate label declaration `%s'", 177},
  {"this is a previous declaration", 178},
  {"unnamed struct/union that defines no instances", 179},
  {"useless keyword or type name in empty declaration", 180},
  {"two types specified in one empty declaration", 181},
  {"empty declaration", 182},
  {"`%s' is usually a function", 183},
  {"typedef `%s' is initialized", 184},
  {"function `%s' is initialized like a variable", 185},
  {"parameter `%s' is initialized", 186},
  {"variable-sized object may not be initialized", 187},
  {"variable `%s' has initializer but incomplete type", 188},
  {"elements of array `%s' have incomplete type", 189},
  {"declaration of `%s' has `extern' and is initialized", 190},
  {"initializer fails to determine size of `%s'", 191},
  {"array size missing in `%s'", 192},
  {"zero or negative size array `%s'", 193},
  {"storage size of `%s' isn't known", 194},
  {"storage size of `%s' isn't constant", 195},
  {"ANSI C forbids parameter `%s' shadowing typedef", 196},
  {"`long long long' is too long for GCC", 197},
  {"ISO C89 does not support `long long'", 198},
  {"duplicate `%s'", 199},
  {"two or more data types in declaration of `%s'", 200},
  {"`%s' fails to be a typedef or built in type", 201},
  {"both long and short specified for `%s'", 202},
  {"long or short specified with char for `%s'", 203},
  {"long or short specified with floating type for `%s'", 204},
  {"the only valid combination is `long double'", 205},
  {"both signed and unsigned specified for `%s'", 206},
  {"long, short, signed or unsigned invalid for `%s'", 207},
  {"long, short, signed or unsigned used invalidly for `%s'", 208},
  {"complex invalid for `%s'", 209},
  {"duplicate `const'", 210},
  {"duplicate `restrict'", 211},
  {"duplicate `volatile'", 212},
  {"multiple storage classes in declaration of `%s'", 213},
  {"function definition declared `auto'", 214},
  {"function definition declared `register'", 215},
  {"function definition declared `typedef'", 216},
  {"storage class specified for structure field `%s'", 217},
  {"storage class specified for parameter `%s'", 218},
  {"storage class specified for typename", 219},
  {"`%s' initialized and declared `extern'", 220},
  {"`%s' has both `extern' and initializer", 221},
  {"nested function `%s' declared `extern'", 222},
  {"top-level declaration of `%s' specifies `auto'", 223},
  {"declaration of `%s' as array of voids", 224},
  {"declaration of `%s' as array of functions", 225},
  {"size of array `%s' has non-integer type", 226},
  {"ISO C forbids zero-size array `%s'", 227},
  {"size of array `%s' is negative", 228},
  {"ISO C89 forbids array `%s' whose size can't be evaluated", 229},
  {"ISO C89 forbids variable-size array `%s'", 230},
  {"size of array `%s' is too large", 231},
  {"array type has incomplete element type", 232},
  {"ANSI C forbids const or volatile function types", 233},
  {"`%s' declared as function returning a function", 234},
  {"`%s' declared as function returning an array", 235},
  {"ISO C forbids qualified function types", 236},
  {"invalid type modifier within pointer declarator", 237},
  {"ISO C forbids const or volatile function types", 238},
  {"variable or field `%s' declared void", 239},
  {"field `%s' declared as a function", 240},
  {"field `%s' has incomplete type", 241},
  {"invalid storage class for function `%s'", 242},
  {"ISO C forbids qualified void function return type", 243},
  {"`noreturn' function returns non-void value", 244},
  {"cannot inline function `main'", 245},
  {"variable `%s' declared `inline'", 246},
  {"function declaration isn't a prototype", 247},
  {"parameter names (without types) in function declaration", 248},
  {"parameter `%s' has incomplete type", 249},
  {"parameter has incomplete type", 250},
  {"parameter `%s' points to incomplete type", 251},
  {"parameter points to incomplete type", 252},
  {"parameter `%s' has just a forward declaration", 253},
  {"`void' in parameter list must be the entire list", 254},
  {"`%s %s' declared inside parameter list", 255},
  {"anonymous struct declared inside parameter list", 256},
  {"anonymous union declared inside parameter list", 257},
  {"anonymous enum declared inside parameter list", 258},
  {"\
its scope is only this definition or declaration, which is probably not what \
you want.", 259},
  {"ISO C forbids forward references to `enum' types", 260},
  {"redefinition of `%s %s'", 261},
  {"%s defined inside parms", 262},
  {"union", 263},
  {"structure", 264},
  {"%s has no %s", 265},
  {"struct", 266},
  {"named members", 267},
  {"members", 268},
  {"nested redefinition of `%s'", 269},
  {"bit-field `%s' width not an integer constant", 270},
  {"bit-field `%s' has invalid type", 271},
  {"bit-field `%s' type invalid in ISO C", 272},
  {"negative width in bit-field `%s'", 273},
  {"width of `%s' exceeds its type", 274},
  {"zero width for bit-field `%s'", 275},
  {"`%s' is narrower than values of its type", 276},
  {"duplicate member `%s'", 277},
  {"union cannot be made transparent", 278},
  {"redeclaration of `enum %s'", 279},
  {"enum defined inside parms", 280},
  {"enumeration values exceed range of largest integer", 281},
  {"enumerator value for `%s' not integer constant", 282},
  {"overflow in enumeration values", 283},
  {"ISO C restricts enumerator values to range of `int'", 284},
  {"return type is an incomplete type", 285},
  {"no previous prototype for `%s'", 286},
  {"`%s' was used with no prototype before its definition", 287},
  {"no previous declaration for `%s'", 288},
  {"`%s' was used with no declaration before its definition", 289},
  {"return type of `%s' is not `int'", 290},
  {"first argument of `%s' should be `int'", 291},
  {"second argument of `%s' should be `char **'", 292},
  {"third argument of `%s' should probably be `char **'", 293},
  {"`%s' takes only zero or two arguments", 294},
  {"third argument of `%s' is deprecated", 295},
  {"`%s' is normally a non-static function", 296},
  {"parm types given both in parmlist and separately", 297},
  {"parameter name omitted", 298},
  {"parameter `%s' declared void", 299},
  {"parameter name missing from parameter list", 300},
  {"multiple parameters named `%s'", 301},
  {"type of `%s' defaults to `int'", 302},
  {"declaration for parameter `%s' but no such parameter", 303},
  {"number of arguments doesn't match prototype", 304},
  {"promoted argument `%s' doesn't match prototype", 305},
  {"argument `%s' doesn't match prototype", 306},
  {"type of parameter `%s' is not declared", 307},
  {"function might be possible candidate for attribute `noreturn'", 308},
  {"`noreturn' function does return", 309},
  {"control reaches end of non-void function", 310},
  {"this function may return with or without a value", 311},
  {"size of return value of `%s' is %u bytes", 312},
  {"size of return value of `%s' is larger than %d bytes", 313},
  {"ISO C forbids case ranges", 314},
  {"label must have integral type in ISO C", 315},
  {"default label not within a switch statement", 316},
  {"case label not within a switch statement", 317},
  {"multiple default labels in one switch", 318},
  {"this is the first default label", 319},
  {"duplicate case value", 320},
  {"this is the first entry for that value", 321},
  {"case value out of range", 322},
  {"case label within scope of cleanup or variable array", 323},
  {"stray '\\' in program", 324},
  {"invalid #-line", 325},
  {"undefined or invalid # directive `%s'", 326},
  {"invalid #line", 327},
  {"badly nested C headers from preprocessor", 328},
  {"#-lines for entering and leaving files don't match", 329},
  {"ignoring #pragma %s %s", 330},
  {"ignoring #pragma %s", 331},
  {"incomplete universal-character-name", 332},
  {"non hex digit '%c' in universal-character-name", 333},
  {"universal-character-name on EBCDIC target", 334},
  {"universal-character-name used for '%c'", 335},
  {"invalid universal-character-name", 336},
  {"the meaning of `\\x' varies with -traditional", 337},
  {"\\x used with no following hex digits", 338},
  {"hex escape out of range", 339},
  {"the meaning of '\\a' varies with -traditional", 340},
  {"the meaning of '\\%c' varies with -traditional", 341},
  {"non-ISO-standard escape sequence, '\\%c'", 342},
  {"unknown escape sequence '\\%c'", 343},
  {"unknown escape sequence: '\\' followed by char 0x%.2x", 344},
  {"universal-character-name '\\U%08x' not valid in identifier", 345},
  {"universal-character-name '\\u%04x' not valid in identifier", 346},
  {"both 'f' and 'l' suffixes on floating constant", 347},
  {"floating point number exceeds range of '%s'", 348},
  {"stray '%c' in program", 349},
  {"stray '\\%#o' in program", 350},
  {"'$' in identifier", 351},
  {"parse error at '..'", 352},
  {"floating constant may not be in radix 16", 353},
  {"traditional C rejects the 'f' suffix", 354},
  {"traditional C rejects the 'l' suffix", 355},
  {"ISO C forbids imaginary numeric constants", 356},
  {"floating point number exceeds range of 'double'", 357},
  {"two 'u' suffixes on integer constant", 358},
  {"traditional C rejects the 'u' suffix", 359},
  {"three 'l' suffixes on integer constant", 360},
  {"'lul' is not a valid integer suffix", 361},
  {"'Ll' and 'lL' are not valid integer suffixes", 362},
  {"ISO C89 forbids long long integer constants", 363},
  {"more than one 'i' or 'j' suffix on integer constant", 364},
  {"\
integer constant is too large for this configuration of the compiler - \
truncated to %d bits", 365},
  {"width of integer constant changes with -traditional", 366},
  {"integer constant is unsigned in ISO C, signed with -traditional", 367},
  {"width of integer constant may change on other systems with -traditional", 368},
  {"integer constant larger than the maximum value of an unsigned long int", 369},
  {"decimal constant is so large that it is unsigned", 370},
  {"integer constant is larger than the maximum value for its type", 371},
  {"missing white space after number '%.*s'", 372},
  {"Ignoring invalid multibyte character", 373},
  {"escape sequence out of range for character", 374},
  {"empty character constant", 375},
  {"character constant too long", 376},
  {"multi-character character constant", 377},
  {"syntax error", 378},
  {"syntax error: cannot back up", 379},
  {"parser stack overflow", 380},
  {"ISO C forbids an empty source file", 381},
  {"argument of `asm' is not a constant string", 382},
  {"ISO C forbids data definition with no type or storage class", 383},
  {"data definition has no type or storage class", 384},
  {"ISO C does not allow extra `;' outside of a function", 385},
  {"traditional C rejects the unary plus operator", 386},
  {"ISO C forbids `&&'", 387},
  {"`sizeof' applied to a bit-field", 388},
  {"ISO C89 forbids constructor expressions", 389},
  {"ISO C forbids omitting the middle term of a ?: expression", 390},
  {"ISO C forbids braced-groups within expressions", 391},
  {"traditional C rejects string concatenation", 392},
  {"ISO C does not permit use of `varargs.h'", 393},
  {"`%s' is not at beginning of declaration", 394},
  {"ISO C forbids empty initializer braces", 395},
  {"ISO C forbids nested functions", 396},
  {"`[*]' in parameter declaration only allowed in ISO C 99", 397},
  {"comma at end of enumerator list", 398},
  {"no semicolon at end of struct or union", 399},
  {"extra semicolon in struct or union specified", 400},
  {"ISO C doesn't support unnamed structs/unions", 401},
  {"ISO C forbids member declarations with no members", 402},
  {"ISO C forbids label at end of compound statement", 403},
  {"ISO C forbids label declarations", 404},
  {"braced-group within expression allowed only inside a function", 405},
  {"empty body in an else-statement", 406},
  {"ISO C forbids `goto *expr;'", 407},
  {"ISO C forbids forward parameter declarations", 408},
  {"ISO C requires a named argument before `...'", 409},
  {"`...' in old-style identifier list", 410},
  {"parse error; also virtual memory exceeded", 411},
  {"parse error", 412},
  {"%s at end of input", 413},
  {"%s before %s'%c'", 414},
  {"%s before %s'\\x%x'", 415},
  {"%s before string constant", 416},
  {"%s before numeric constant", 417},
  {"%s before \"%s\"", 418},
  {"%s before '%s' token", 419},
  {"invalid identifier `%s'", 420},
  {"syntax error before '%s' token", 421},
  {"YYDEBUG not defined.", 422},
  {"\
#pragma pack (pop) encountered without matching #pragma pack (push, <n>)", 423},
  {"\
#pragma pack(pop, %s) encountered without matching #pragma pack(push, %s, \
<n>)", 424},
  {"junk at end of '#pragma pack'", 425},
  {"junk at end of #pragma weak", 426},
  {"malformed #pragma directive", 427},
  {"break statement not within loop or switch", 428},
  {"continue statement not within a loop", 429},
  {"%s qualifier ignored on asm", 430},
  {"`%s' has an incomplete type", 431},
  {"invalid use of void expression", 432},
  {"invalid use of array with unspecified bounds", 433},
  {"invalid use of undefined type `%s %s'", 434},
  {"invalid use of incomplete typedef `%s'", 435},
  {"function types not truly compatible in ISO C", 436},
  {"types are not quite compatible", 437},
  {"sizeof applied to a function type", 438},
  {"sizeof applied to a void type", 439},
  {"sizeof applied to an incomplete type", 440},
  {"arithmetic on pointer to an incomplete type", 441},
  {"__alignof__ applied to an incomplete type", 442},
  {"`__alignof' applied to a bit-field", 443},
  {"invalid use of non-lvalue array", 444},
  {"%s has no member named `%s'", 445},
  {"request for member `%s' in something not a structure or union", 446},
  {"dereferencing pointer to incomplete type", 447},
  {"dereferencing `void *' pointer", 448},
  {"invalid type argument of `%s'", 449},
  {"subscript missing in array reference", 450},
  {"array subscript has type `char'", 451},
  {"array subscript is not an integer", 452},
  {"ISO C forbids subscripting `register' array", 453},
  {"ISO C89 forbids subscripting non-lvalue array", 454},
  {"subscript has type `char'", 455},
  {"subscripted value is neither array nor pointer", 456},
  {"`%s' undeclared here (not in a function)", 457},
  {"`%s' undeclared (first use in this function)", 458},
  {"(Each undeclared identifier is reported only once", 459},
  {"for each function it appears in.)", 460},
  {"local declaration of `%s' hides instance variable", 461},
  {"called object is not a function", 462},
  {"too many arguments to function", 463},
  {"type of formal parameter %d is incomplete", 464},
  {"%s as integer rather than floating due to prototype", 465},
  {"%s as complex rather than floating due to prototype", 466},
  {"%s as floating rather than integer due to prototype", 467},
  {"%s as floating rather than complex due to prototype", 468},
  {"%s as `float' rather than `double' due to prototype", 469},
  {"%s with different width due to prototype", 470},
  {"%s as unsigned due to prototype", 471},
  {"%s as signed due to prototype", 472},
  {"too few arguments to function", 473},
  {"suggest parentheses around + or - inside shift", 474},
  {"suggest parentheses around && within ||", 475},
  {"suggest parentheses around arithmetic in operand of |", 476},
  {"suggest parentheses around comparison in operand of |", 477},
  {"suggest parentheses around arithmetic in operand of ^", 478},
  {"suggest parentheses around comparison in operand of ^", 479},
  {"suggest parentheses around + or - in operand of &", 480},
  {"suggest parentheses around comparison in operand of &", 481},
  {"comparisons like X<=Y<=Z do not have their mathematical meaning", 482},
  {"right shift count is negative", 483},
  {"right shift count >= width of type", 484},
  {"left shift count is negative", 485},
  {"left shift count >= width of type", 486},
  {"shift count is negative", 487},
  {"shift count >= width of type", 488},
  {"comparing floating point with == or != is unsafe", 489},
  {"ISO C forbids comparison of `void *' with function pointer", 490},
  {"comparison of distinct pointer types lacks a cast", 491},
  {"comparison between pointer and integer", 492},
  {"ISO C forbids ordered comparisons of pointers to functions", 493},
  {"comparison of complete and incomplete pointers", 494},
  {"ordered comparison of pointer with integer zero", 495},
  {"unordered comparison on non-floating point argument", 496},
  {"comparison between signed and unsigned", 497},
  {"comparison of promoted ~unsigned with constant", 498},
  {"comparison of promoted ~unsigned with unsigned", 499},
  {"pointer of type `void *' used in arithmetic", 500},
  {"pointer to a function used in arithmetic", 501},
  {"pointer of type `void *' used in subtraction", 502},
  {"pointer to a function used in subtraction", 503},
  {"wrong type argument to unary plus", 504},
  {"wrong type argument to unary minus", 505},
  {"wrong type argument to bit-complement", 506},
  {"wrong type argument to abs", 507},
  {"wrong type argument to conjugation", 508},
  {"wrong type argument to unary exclamation mark", 509},
  {"wrong type argument to %s", 510},
  {"%s of pointer to unknown structure", 511},
  {"invalid lvalue in increment", 512},
  {"invalid lvalue in decrement", 513},
  {"increment", 514},
  {"decrement", 515},
  {"ISO C forbids the address of a cast expression", 516},
  {"invalid lvalue in unary `&'", 517},
  {"attempt to take address of bit-field structure member `%s'", 518},
  {"%s", 519},
  {"ISO C forbids use of conditional expressions as lvalues", 520},
  {"ISO C forbids use of compound expressions as lvalues", 521},
  {"ISO C forbids use of cast expressions as lvalues", 522},
  {"%s of read-only member `%s'", 523},
  {"%s of read-only variable `%s'", 524},
  {"%s of read-only location", 525},
  {"cannot take address of bitfield `%s'", 526},
  {"global register variable `%s' used in nested function", 527},
  {"register variable `%s' used in nested function", 528},
  {"address of global register variable `%s' requested", 529},
  {"cannot put object with volatile field into register", 530},
  {"address of register variable `%s' requested", 531},
  {"signed and unsigned type in conditional expression", 532},
  {"ISO C forbids conditional expr with only one void side", 533},
  {"ISO C forbids conditional expr between `void *' and function pointer", 534},
  {"pointer type mismatch in conditional expression", 535},
  {"pointer/integer type mismatch in conditional expression", 536},
  {"ANSI C forbids conditional expr between 0 and function pointer", 537},
  {"type mismatch in conditional expression", 538},
  {"left-hand operand of comma expression has no effect", 539},
  {"cast specifies array type", 540},
  {"cast specifies function type", 541},
  {"ISO C forbids casting nonscalar to the same type", 542},
  {"ISO C forbids casts to union type", 543},
  {"cast to union type from type not present in union", 544},
  {"cast discards qualifiers from pointer target type", 545},
  {"cast increases required alignment of target type", 546},
  {"cast from pointer to integer of different size", 547},
  {"cast does not match function type", 548},
  {"cast to pointer from integer of different size", 549},
  {"invalid lvalue in assignment", 550},
  {"assignment", 551},
  {"%s makes qualified function pointer from unqualified", 552},
  {"%s discards qualifiers from pointer target type", 553},
  {"ISO C prohibits argument conversion to union type", 554},
  {"ISO C forbids %s between function pointer and `void *'", 555},
  {"pointer targets in %s differ in signedness", 556},
  {"%s from incompatible pointer type", 557},
  {"%s makes pointer from integer without a cast", 558},
  {"%s makes integer from pointer without a cast", 559},
  {"incompatible type for argument %d of `%s'", 560},
  {"incompatible type for argument %d of indirect function call", 561},
  {"incompatible types in %s", 562},
  {"passing arg %d of `%s'", 563},
  {"passing arg %d of pointer to function", 564},
  {"initializer for static variable is not constant", 565},
  {"initializer for static variable uses complicated arithmetic", 566},
  {"aggregate initializer is not constant", 567},
  {"aggregate initializer uses complicated arithmetic", 568},
  {"traditional C rejects automatic aggregate initialization", 569},
  {"(near initialization for `%s')", 570},
  {"char-array initialized from wide string", 571},
  {"int-array initialized from non-wide string", 572},
  {"initializer-string for array of chars is too long", 573},
  {"array initialized from non-constant array expression", 574},
  {"initializer element is not constant", 575},
  {"initializer element is not computable at load time", 576},
  {"initialization", 577},
  {"invalid initializer", 578},
  {"extra brace group at end of initializer", 579},
  {"missing braces around initializer", 580},
  {"braces around scalar initializer", 581},
  {"missing initializer", 582},
  {"empty braces in initializer", 583},
  {"empty scalar initializer", 584},
  {"extra elements in scalar initializer", 585},
  {"zero or negative array size `%s'", 586},
  {"nonconstant array index in initializer", 587},
  {"array index in non-array initializer", 588},
  {"duplicate array index in initializer", 589},
  {"empty index range in initializer", 590},
  {"ISO C89 forbids specifying element to initialize", 591},
  {"unknown field `%s' specified in initializer", 592},
  {"field `%s' already initialized", 593},
  {"ISO C89 forbids specifying structure member to initialize", 594},
  {"duplicate initializer", 595},
  {"excess elements in char array initializer", 596},
  {"excess elements in struct initializer", 597},
  {"excess elements in union initializer", 598},
  {"traditional C rejects initialization of unions", 599},
  {"excess elements in array initializer", 600},
  {"excess elements in scalar initializer", 601},
  {"asm template is not a string constant", 602},
  {"invalid lvalue in asm statement", 603},
  {"modification by `asm'", 604},
  {"function declared `noreturn' has a `return' statement", 605},
  {"`return' with a value, in function returning void", 606},
  {"return", 607},
  {"function returns address of local variable", 608},
  {"switch quantity not an integer", 609},
  {"`long' switch expression not converted to `int' in ISO C", 610},
  {"inlining failed in call to `%s'", 611},
  {"called from here", 612},
  {"can't inline call to `%s'", 613},
  {"function call has aggregate value", 614},
  {"internal error", 615},
  {"no arguments", 616},
  {"fopen %s", 617},
  {"fclose %s", 618},
  {"collect2 version %s", 619},
  {"%d constructor(s) found\n", 620},
  {"%d destructor(s)  found\n", 621},
  {"%d frame table(s) found\n", 622},
  {"%s terminated with signal %d [%s]%s", 623},
  {"%s returned %d exit status", 624},
  {"[cannot find %s]", 625},
  {"cannot find `%s'", 626},
  {"redirecting stdout: %s", 627},
  {"[Leaving %s]\n", 628},
  {"\
\n\
write_c_file - output name is %s, prefix is %s\n", 629},
  {"cannot find `nm'", 630},
  {"pipe", 631},
  {"fdopen", 632},
  {"dup2 %d 1", 633},
  {"close %d", 634},
  {"execvp %s", 635},
  {"init function found in object %s", 636},
  {"fini function found in object %s", 637},
  {"fclose", 638},
  {"unable to open file '%s'", 639},
  {"unable to stat file '%s'", 640},
  {"unable to mmap file '%s'", 641},
  {"not found\n", 642},
  {"dynamic dependency %s not found", 643},
  {"bad magic number in file '%s'", 644},
  {"dynamic dependencies.\n", 645},
  {"cannot find `ldd'", 646},
  {"execv %s", 647},
  {"\
\n\
ldd output with constructors/destructors.\n", 648},
  {"unable to open dynamic dependency '%s'", 649},
  {"%s: not a COFF file", 650},
  {"%s: cannot open as COFF file", 651},
  {"Library lib%s not found", 652},
  {"open %s", 653},
  {"incompatibilities between object file & expected values", 654},
  {"\
\n\
Processing symbol table #%d, offset = 0x%.8lx, kind = %s\n", 655},
  {"string section missing", 656},
  {"section pointer missing", 657},
  {"no symbol table found", 658},
  {"no cmd_strings found", 659},
  {"\
\n\
Updating header and load commands.\n\
\n", 660},
  {"load command map, %d cmds, new size %ld.\n", 661},
  {"\
writing load commands.\n\
\n", 662},
  {"close %s", 663},
  {"could not convert 0x%l.8x into a region", 664},
  {"%s function, region %d, offset = %ld (0x%.8lx)\n", 665},
  {"bad magic number", 666},
  {"bad header version", 667},
  {"bad raw header version", 668},
  {"raw header buffer too small", 669},
  {"old raw header file", 670},
  {"unsupported version", 671},
  {"unknown {de,en}code_mach_o_hdr return value %d", 672},
  {"fstat %s", 673},
  {"lseek %s 0", 674},
  {"read %s", 675},
  {"read %ld bytes, expected %ld, from %s", 676},
  {"msync %s", 677},
  {"munmap %s", 678},
  {"write %s", 679},
  {"wrote %ld bytes, expected %ld, to %s", 680},
  {"\
;; Combiner statistics: %d attempts, %d substitutions (%d requiring new \
space),\n\
;; %d successes.\n\
\n", 681},
  {"\
\n\
;; Combiner totals: %d attempts, %d substitutions (%d requiring new space),\n\
;; %d successes.\n", 682},
  {"invalid %%Q value", 683},
  {"invalid %%C value", 684},
  {"invalid %%N value", 685},
  {"invalid %%M value", 686},
  {"invalid %%m value", 687},
  {"invalid %%L value", 688},
  {"invalid %%O value", 689},
  {"invalid %%P value", 690},
  {"invalid %%V value", 691},
  {"Generate code assuming DW bit is set", 692},
  {"Generate code assuming DW bit is not set", 693},
  {"Generate code using byte writes", 694},
  {"Do not generate byte writes", 695},
  {"Use small memory model", 696},
  {"Use normal memory model", 697},
  {"Use large memory model", 698},
  {"Generate 29050 code", 699},
  {"Generate 29000 code", 700},
  {"Use kernel global registers", 701},
  {"Use user global registers", 702},
  {"Emit stack checking code", 703},
  {"Do not emit stack checking code", 704},
  {"Work around storem hardware bug", 705},
  {"Do not work around storem hardware bug", 706},
  {"Store locals in argument registers", 707},
  {"Do not store locals in arg registers", 708},
  {"Use software floating point", 709},
  {"Do not generate multm instructions", 710},
  {"bad value `%s' for -mtrap-precision switch", 711},
  {"bad value `%s' for -mfp-rounding-mode switch", 712},
  {"bad value `%s' for -mfp-trap-mode switch", 713},
  {"bad value `%s' for -mcpu switch", 714},
  {"fp software completion requires -mtrap-precision=i", 715},
  {"rounding mode not supported for VAX floats", 716},
  {"trap mode not supported for VAX floats", 717},
  {"L%d cache latency unknown for %s", 718},
  {"bad value `%s' for -mmemory-latency", 719},
  {"invalid %%r value", 720},
  {"invalid %%R value", 721},
  {"invalid %%h value", 722},
  {"invalid %%U value", 723},
  {"invalid %%s value", 724},
  {"invalid %%E value", 725},
  {"invalid %%xn code", 726},
  {"Use hardware fp", 727},
  {"Do not use hardware fp", 728},
  {"Use fp registers", 729},
  {"Do not use fp registers", 730},
  {"Do not assume GAS", 731},
  {"Assume GAS", 732},
  {"Request IEEE-conformant math library routines (OSF/1)", 733},
  {"Emit IEEE-conformant code, without inexact exceptions", 734},
  {"Emit IEEE-conformant code, with inexact exceptions", 735},
  {"Do not emit complex integer constants to read-only memory", 736},
  {"Use VAX fp", 737},
  {"Do not use VAX fp", 738},
  {"Emit code for the byte/word ISA extension", 739},
  {"Emit code for the motion video ISA extension", 740},
  {"Emit code for the fp move and sqrt ISA extension", 741},
  {"Emit code for the counting ISA extension", 742},
  {"Generate code for a given CPU", 743},
  {"Control the generated fp rounding mode", 744},
  {"Control the IEEE trap mode", 745},
  {"Control the precision given to fp exceptions", 746},
  {"Tune expected memory latency", 747},
  {"bad value (%s) for -mcpu switch", 748},
  {"invalid operand to %R code", 749},
  {"invalid operand to %H/%L code", 750},
  {"invalid operand to %U code", 751},
  {"invalid operand to %V code", 752},
  {"invalid operand output code", 753},
  {"switch -mcpu=%s conflicts with -march= switch", 754},
  {"bad value (%s) for %s switch", 755},
  {"target CPU does not support APCS-32", 756},
  {"target CPU does not support APCS-26", 757},
  {"target CPU does not support interworking", 758},
  {"target CPU does not supoport THUMB instructions.", 759},
  {"\
enabling backtrace support is only meaningful when compiling for the Thumb.", 760},
  {"\
enabling callee interworking support is only meaningful when compiling for \
the Thumb.", 761},
  {"\
enabling caller interworking support is only meaningful when compiling for \
the Thumb.", 762},
  {"interworking forces APCS-32 to be used", 763},
  {"-mapcs-stack-check incompatible with -mno-apcs-frame", 764},
  {"-fpic and -mapcs-reent are incompatible", 765},
  {"APCS reentrant code not supported.  Ignored", 766},
  {"-g with -mno-apcs-frame may not give sensible debugging", 767},
  {"Passing floating point arguments in fp regs not yet supported", 768},
  {"Invalid floating point emulation option: -mfpe-%s", 769},
  {"Structure size boundary can only be set to 8 or 32", 770},
  {"-mpic-register= is useless without -fpic", 771},
  {"Unable to use '%s' for PIC register", 772},
  {"Unable to compute real location of stacked parameter", 773},
  {"No low registers available for popping high registers", 774},
  {"thumb_load_double_from_address: destination is not a register", 775},
  {"thumb_load_double_from_address: source is not a computed memory address", 776},
  {"thumb_load_double_from_address: base is not a register", 777},
  {"thumb_load_double_from_address: Unhandled address calculation", 778},
  {"Generate APCS conformant stack frames", 779},
  {"Store function names in object code", 780},
  {"Use the 32bit version of the APCS", 781},
  {"Use the 26bit version of the APCS", 782},
  {"Pass FP arguments in FP registers", 783},
  {"Generate re-entrant, PIC code", 784},
  {"The MMU will trap on unaligned accesses", 785},
  {"Use library calls to perform FP operations", 786},
  {"Use hardware floating point instructions", 787},
  {"Assume target CPU is configured as big endian", 788},
  {"Assume target CPU is configured as little endian", 789},
  {"Assume big endian bytes, little endian words", 790},
  {"Support calls between THUMB and ARM instructions sets", 791},
  {"Generate a call to abort if a noreturn function returns", 792},
  {"Do not move instructions into a function's prologue", 793},
  {"Do not load the PIC register in function prologues", 794},
  {"Generate call insns as indirect calls, if necessary", 795},
  {"Compile for the Thumb not the ARM", 796},
  {"Thumb: Generate (non-leaf) stack frames even if not needed", 797},
  {"Thumb: Generate (leaf) stack frames even if not needed", 798},
  {"Thumb: Assume non-static functions may be called from ARM code", 799},
  {"Thumb: Assume function pointers may go to non-Thumb aware code", 800},
  {"Specify the name of the target CPU", 801},
  {"Specify the name of the target architecture", 802},
  {"Specify the version of the floating point emulator", 803},
  {"Specify the minimum bit alignment of structures", 804},
  {"Specify the register to be used for PIC addressing", 805},
  {"Do symbol renaming for BSD", 806},
  {"Do symbol renaming for X/OPEN", 807},
  {"Don't do symbol renaming", 808},
  {"Generate code for the C400", 809},
  {"Generate code for the C300", 810},
  {"Generate code for c1", 811},
  {"Generate code for c2", 812},
  {"Generate code for c32", 813},
  {"Generate code for c34", 814},
  {"Use standard calling sequence, with arg count word", 815},
  {"Place arg count in a nop instruction (faster than push)", 816},
  {"Don't push arg count, depend on symbol table", 817},
  {"Use data cache for volatile mem refs (default)", 818},
  {"Don't use data cache for volatile mem refs", 819},
  {"Bypass data cache for volatile mem refs", 820},
  {"Use 64-bit longs", 821},
  {"Use cc- and libc-compatible 32-bit longs", 822},
  {"Invalid register class letter %c", 823},
  {"ACCUM_HIGH_REGS class in limit_reload_class", 824},
  {"YH_OR_ACCUM_HIGH_REGS found in limit_reload_class", 825},
  {"YL found in limit_reload_class", 826},
  {"Stack size > 32k", 827},
  {"Invalid addressing mode", 828},
  {"Bad register extension code", 829},
  {"Invalid offset in ybase addressing", 830},
  {"Invalid register in ybase addressing", 831},
  {"inline float constants not supported on this host", 832},
  {"Invalid shift operator in emit_1600_core_shift", 833},
  {"Invalid mode for gen_tst_reg", 834},
  {"Invalid mode for integer comparison in gen_compare_reg", 835},
  {"Invalid register for compare", 836},
  {"Profiling not implemented yet.", 837},
  {"Trampolines not yet implemented", 838},
  {"Generate code the unix assembler can handle", 839},
  {"Generate code an embedded assembler can handle", 840},
  {"Generate code for a mc68020", 841},
  {"Use bitfield instructions", 842},
  {"Generate code for a mc68000", 843},
  {"Generate software FP code", 844},
  {"Do not generate bitfield insns", 845},
  {"Use 16bit integers", 846},
  {"Use 32bit integers", 847},
  {"Compile for Gmicro/300", 848},
  {"Compile for Gmicro/200", 849},
  {"Compile for Gmicro/100", 850},
  {"Use floating point co-processor", 851},
  {"Do not use floating point co-processor", 852},
  {"Alternate calling convention", 853},
  {"Use normal calling convention", 854},
  {"Do not use bitfield instructions", 855},
  {"Use alternative return sequence", 856},
  {"Use normal return sequence", 857},
  {"Always use string instruction", 858},
  {"Use string instruction when appropriate", 859},
  {"Only initialized variables can be placed into the 8-bit area.", 860},
  {"Generate H8/S code", 861},
  {"Do not generate H8/S code", 862},
  {"Make integers 32 bits wide", 863},
  {"Use registers for argument passing", 864},
  {"Do not use registers for argument passing", 865},
  {"Consider access to byte sized memory slow", 866},
  {"Enable linker relaxing", 867},
  {"Generate H8/300H code", 868},
  {"Do not generate H8/300H code", 869},
  {"Use H8/300 alignment rules", 870},
  {"real name is too long - alias ignored", 871},
  {"alias name is too long - alias ignored", 872},
  {"junk at end of #pragma map", 873},
  {"malformed #pragma map, ignored", 874},
  {"Generate char instructions", 875},
  {"Do not generate char instructions", 876},
  {"Use the Cygwin interface", 877},
  {"Use the Mingw32 interface", 878},
  {"Create GUI application", 879},
  {"Create console application", 880},
  {"Generate code for a DLL", 881},
  {"Ignore dllimport for functions", 882},
  {"Use Mingw-specific thread support", 883},
  {"-f%s ignored for target (all code is position independent)", 884},
  {"Internal gcc abort from %s:%d", 885},
  {"The local variable `insn' has the value:", 886},
  {"Retain standard MXDB information", 887},
  {"Retain legend information", 888},
  {"Generate external legend information", 889},
  {"Emit identifying info in .s file", 890},
  {"Warn when a function arg is a structure", 891},
  {"argument is a structure", 892},
  {"bad value (%s) for -march= switch", 893},
  {"bad value (%s) for -mcpu= switch", 894},
  {"Register '%c' is unknown", 895},
  {"Register '%c' already specified in allocation order", 896},
  {"-mregparm=%d is not between 0 and %d", 897},
  {"-malign-loops=%d is not between 0 and %d", 898},
  {"-malign-jumps=%d is not between 0 and %d", 899},
  {"-malign-functions=%d is not between 0 and %d", 900},
  {"-mpreferred-stack-boundary=%d is not between 2 and 31", 901},
  {"-mbranch-cost=%d is not between 0 and 5", 902},
  {"floating constant misused", 903},
  {"invalid UNSPEC as operand", 904},
  {"invalid expression as operand", 905},
  {"half-pic init called on systems that don't support it.", 906},
  {"Same as -mcpu=i386", 907},
  {"Same as -mcpu=i486", 908},
  {"Same as -mcpu=pentium", 909},
  {"Same as -mcpu=pentiumpro", 910},
  {"Align some doubles on dword boundary", 911},
  {"Align doubles on word boundary", 912},
  {"Uninitialized locals in .bss", 913},
  {"Uninitialized locals in .data", 914},
  {"Use IEEE math for fp comparisons", 915},
  {"Do not use IEEE math for fp comparisons", 916},
  {"Return values of functions in FPU registers", 917},
  {"Do not return values of functions in FPU registers", 918},
  {"Do not generate sin, cos, sqrt for FPU", 919},
  {"Generate sin, cos, sqrt for FPU", 920},
  {"Omit the frame pointer in leaf functions", 921},
  {"Enable stack probing", 922},
  {"Emit Intel syntax assembler opcodes", 923},
  {"Align destination of the string operations", 924},
  {"Do not align destination of the string operations", 925},
  {"Inline all known string operations", 926},
  {"Do not inline all known string operations", 927},
  {"Use push instructions to save outgoing arguments", 928},
  {"Do not use push instructions to save outgoing arguments", 929},
  {"Support MMX builtins", 930},
  {"Do not support MMX builtins", 931},
  {"Support MMX and SSE builtins", 932},
  {"Do not support MMX and SSE builtins", 933},
  {"Schedule code for given CPU", 934},
  {"Generate code for given CPU", 935},
  {"Control allocation order of integer registers", 936},
  {"Number of registers used to pass integer arguments", 937},
  {"Loop code aligned to this power of 2", 938},
  {"Jump targets are aligned to this power of 2", 939},
  {"Function starts are aligned to this power of 2", 940},
  {"Attempt to keep stack aligned to this power of 2", 941},
  {"Branches are this expensive (1-5, arbitrary units)", 942},
  {"Profiling uses mcount", 943},
  {"Emit half-PIC code", 944},
  {"Emit ELF object code", 945},
  {"Emit ROSE object code", 946},
  {"Symbols have a leading underscore", 947},
  {"Align to >word boundaries", 948},
  {"Use mcount for profiling", 949},
  {"Use mcount_ptr for profiling", 950},
  {"%s causes a section type conflict", 951},
  {"Generate COFF output", 952},
  {"Generate ELF output", 953},
  {"`%s' declared as both exported to and imported from a DLL.", 954},
  {"initialized variable `%s' is marked dllimport", 955},
  {"static variable `%s' is marked dllimport", 956},
  {"Environment variable DJGPP not defined.", 957},
  {"Environment variable DJGPP points to missing file '%s'.", 958},
  {"Environment variable DJGPP points to corrupt file '%s'.", 959},
  {"Generate code which uses the FPU", 960},
  {"Do not generate code which uses the FPU", 961},
  {"sorry, not implemented: #pragma align NAME=SIZE", 962},
  {"malformed #pragma align - ignored", 963},
  {"sorry, not implemented: #pragma noalign NAME", 964},
  {"stack limit expression is not supported", 965},
  {"Generate SA code", 966},
  {"Generate SB code", 967},
  {"Generate KA code", 968},
  {"Generate KB code", 969},
  {"Generate JA code", 970},
  {"Generate JD code", 971},
  {"Generate JF code", 972},
  {"generate RP code", 973},
  {"Generate MC code", 974},
  {"Generate CA code", 975},
  {"Generate CF code", 976},
  {"Use alternate leaf function entries", 977},
  {"Do not use alternate leaf function entries", 978},
  {"Perform tail call optimization", 979},
  {"Do not perform tail call optimization", 980},
  {"Use complex addressing modes", 981},
  {"Do not use complex addressing modes", 982},
  {"Align code to 8 byte boundary", 983},
  {"Do not align code to 8 byte boundary", 984},
  {"Enable compatibility with iC960 v2.0", 985},
  {"Enable compatibility with iC960 v3.0", 986},
  {"Enable compatibility with ic960 assembler", 987},
  {"Do not permit unaligned accesses", 988},
  {"Permit unaligned accesses", 989},
  {"Layout types like Intel's v1.3 gcc", 990},
  {"Do not layout types like Intel's v1.3 gcc", 991},
  {"Use 64 bit long doubles", 992},
  {"Enable linker relaxation", 993},
  {"Do not enable linker relaxation", 994},
  {"conflicting architectures defined - using C series", 995},
  {"conflicting architectures defined - using K series", 996},
  {"iC2.0 and iC3.0 are incompatible - using iC3.0", 997},
  {"The -mlong-double-64 option does not work yet.", 998},
  {"-msystem-v and -p are incompatible", 999},
  {"-msystem-v and -mthreads are incompatible", 1000},
  {"bad value (%s) for -mmodel switch", 1001},
  {"bad value (%s) for -msdata switch", 1002},
  {"const objects cannot go in .sdata/.sbss", 1003},
  {"invalid operand to %s code", 1004},
  {"invalid operand to %p code", 1005},
  {"invalid operand to %T/%B code", 1006},
  {"invalid operand to %N code", 1007},
  {"Display compile time statistics", 1008},
  {"Align all loops to 32 byte boundary", 1009},
  {"Only issue one instruction per cycle", 1010},
  {"Prefer branches over conditional execution", 1011},
  {"Code size: small, medium or large", 1012},
  {"Small data area: none, sdata, use", 1013},
  {"-malign-loops=%d is not between 1 and %d", 1014},
  {"-malign-jumps=%d is not between 1 and %d", 1015},
  {"-malign-functions=%d is not between 1 and %d", 1016},
  {"-fPIC is not currently supported on the 68000 or 68010\n", 1017},
  {"Internal gcc monitor: short-branch(%x)", 1018},
  {"Internal gcc error: Can't express symbolic location", 1019},
  {"argument #%d is a structure", 1020},
  {"%R not followed by %B/C/D/E", 1021},
  {"invalid %x/X value", 1022},
  {"invalid %H value", 1023},
  {"invalid %h value", 1024},
  {"invalid %Q value", 1025},
  {"invalid %q value", 1026},
  {"invalid %o value", 1027},
  {"invalid %p value", 1028},
  {"invalid %s/S value", 1029},
  {"invalid %P operand", 1030},
  {"invalid %B value", 1031},
  {"invalid %C value", 1032},
  {"invalid %D value", 1033},
  {"invalid %E value", 1034},
  {"`%d' operand isn't a register", 1035},
  {"invalid %r value", 1036},
  {"operand is r0", 1037},
  {"operand is const_double", 1038},
  {"invalid code", 1039},
  {"-mtrap-large-shift and -mhandle-large-shift are incompatible", 1040},
  {"Invalid option `-mshort-data-%s'", 1041},
  {"-mshort-data-%s is too large ", 1042},
  {"-mshort-data-%s and PIC are incompatible", 1043},
  {"-mips%d not supported", 1044},
  {"bad value (%s) for -mips switch", 1045},
  {"bad value (%s) for -mabi= switch", 1046},
  {"-mabi=%s does not support -mips%d", 1047},
  {"The -mabi=32 support does not work yet.", 1048},
  {"This target does not support the -mabi switch.", 1049},
  {"-mcpu=%s does not support -mips%d", 1050},
  {"-mips%d does not support 64 bit fp registers", 1051},
  {"-mips%d does not support 64 bit gp registers", 1052},
  {"-G is incompatible with PIC code which is the default", 1053},
  {"-membedded-pic and -mabicalls are incompatible", 1054},
  {"-G and -membedded-pic are incompatible", 1055},
  {"Invalid option `entry%s'", 1056},
  {"-mentry is only meaningful with -mips-16", 1057},
  {"internal error: %%) found without a %%( in assembler pattern", 1058},
  {"internal error: %%] found without a %%[ in assembler pattern", 1059},
  {"internal error: %%> found without a %%< in assembler pattern", 1060},
  {"internal error: %%} found without a %%{ in assembler pattern", 1061},
  {"PRINT_OPERAND: Unknown punctuation '%c'", 1062},
  {"PRINT_OPERAND null pointer", 1063},
  {"PRINT_OPERAND: letter %c was found & insn was not CONST_INT", 1064},
  {"PRINT_OPERAND_ADDRESS, null pointer", 1065},
  {"\
MIPS ECOFF format does not allow changing filenames within functions with \
#line", 1066},
  {"gp_offset (%ld) or end_offset (%ld) is less than zero.", 1067},
  {"fp_offset (%ld) or end_offset (%ld) is less than zero.", 1068},
  {"can not handle inconsistent calls to `%s'", 1069},
  {"No default crt0.o", 1070},
  {"Use 64-bit int type", 1071},
  {"Use 64-bit long type", 1072},
  {"Use 32-bit long type", 1073},
  {"Optimize lui/addiu address loads", 1074},
  {"Don't optimize lui/addiu address loads", 1075},
  {"Use MIPS as", 1076},
  {"Use GNU as", 1077},
  {"Use symbolic register names", 1078},
  {"Don't use symbolic register names", 1079},
  {"Use GP relative sdata/sbss sections", 1080},
  {"Don't use GP relative sdata/sbss sections", 1081},
  {"Output compiler statistics", 1082},
  {"Don't output compiler statistics", 1083},
  {"Don't optimize block moves", 1084},
  {"Optimize block moves", 1085},
  {"Use mips-tfile asm postpass", 1086},
  {"Don't use mips-tfile asm postpass", 1087},
  {"Use hardware floating point", 1088},
  {"Use 64-bit FP registers", 1089},
  {"Use 32-bit FP registers", 1090},
  {"Use 64-bit general registers", 1091},
  {"Use 32-bit general registers", 1092},
  {"Use Irix PIC", 1093},
  {"Don't use Irix PIC", 1094},
  {"Use OSF PIC", 1095},
  {"Don't use OSF PIC", 1096},
  {"Use indirect calls", 1097},
  {"Don't use indirect calls", 1098},
  {"Use embedded PIC", 1099},
  {"Don't use embedded PIC", 1100},
  {"Use ROM instead of RAM", 1101},
  {"Don't use ROM instead of RAM", 1102},
  {"Put uninitialized constants in ROM (needs -membedded-data)", 1103},
  {"Don't put uninitialized constants in ROM", 1104},
  {"Use big-endian byte order", 1105},
  {"Use little-endian byte order", 1106},
  {"Use single (32-bit) FP only", 1107},
  {"Don't use single (32-bit) FP only", 1108},
  {"Use multiply accumulate", 1109},
  {"Don't use multiply accumulate", 1110},
  {"Work around early 4300 hardware bug", 1111},
  {"Don't work around early 4300 hardware bug", 1112},
  {"Optimize for 4650", 1113},
  {"Optimize for 3900", 1114},
  {"Trap on integer divide by zero", 1115},
  {"Don't trap on integer divide by zero", 1116},
  {"Trap on integer divide overflow", 1117},
  {"Don't trap on integer divide overflow", 1118},
  {"Specify CPU for scheduling purposes", 1119},
  {"Specify MIPS ISA", 1120},
  {"Use mips16 entry/exit psuedo ops", 1121},
  {"Don't use MIPS16 instructions", 1122},
  {"mips16 function profiling", 1123},
  {"Work around hardware multiply bug", 1124},
  {"Do not work around hardware multiply bug", 1125},
  {"Target the AM33 processor", 1126},
  {"optimization turned on", 1127},
  {"optimization turned off", 1128},
  {"optimization level restored", 1129},
  {"Don't use hardware fp", 1130},
  {"Alternative calling convention", 1131},
  {"Pass some arguments in registers", 1132},
  {"Pass all arguments on stack", 1133},
  {"Optimize for 32532 cpu", 1134},
  {"Optimize for 32332 cpu", 1135},
  {"Optimize for 32032", 1136},
  {"Register sb is zero. Use for absolute addressing", 1137},
  {"Do not use register sb", 1138},
  {"Generate code for high memory", 1139},
  {"Generate code for low memory", 1140},
  {"32381 fpu", 1141},
  {"Use multiply-accumulate fp instructions", 1142},
  {"Do not use multiply-accumulate fp instructions", 1143},
  {"\"Small register classes\" kludge", 1144},
  {"No \"Small register classes\" kludge", 1145},
  {"\
Unknown -mschedule= option (%s).\n\
Valid options are 700, 7100, 7100LC, 7200, and 8000\n", 1146},
  {"\
Unknown -march= option (%s).\n\
Valid options are 1.0, 1.1, and 2.0\n", 1147},
  {"PIC code generation is not supported in the portable runtime model\n", 1148},
  {"PIC code generation is not compatible with fast indirect calls\n", 1149},
  {"PIC code generation is not compatible with profiling\n", 1150},
  {"-g is only supported when using GAS on this processor,", 1151},
  {"-g option disabled.", 1152},
  {"Do not use hardware floating point", 1153},
  {"Return floating point results in ac0", 1154},
  {"Return floating point results in memory", 1155},
  {"Generate code for an 11/40", 1156},
  {"Generate code for an 11/45", 1157},
  {"Generate code for an 11/10", 1158},
  {"Use 32 bit int", 1159},
  {"Use 16 bit int", 1160},
  {"Use 32 bit float", 1161},
  {"Use 64 bit float", 1162},
  {"Target has split I&D", 1163},
  {"Target does not have split I&D", 1164},
  {"Use UNIX assembler syntax", 1165},
  {"Use DEC assembler syntax", 1166},
  {"invalid %%B value", 1167},
  {"invalid %%S value", 1168},
  {"invalid %%b value", 1169},
  {"invalid %%H value", 1170},
  {"invalid %%z value", 1171},
  {"invalid %%Z value", 1172},
  {"invalid %%k value", 1173},
  {"invalid %%j value", 1174},
  {"can't have varargs with -mfp-arg-in-fp-regs", 1175},
  {"Always pass floating-point arguments in memory", 1176},
  {"Don't always pass floating-point arguments in memory", 1177},
  {"Support message passing with the Parallel Environment", 1178},
  {"Compile for 64-bit pointers", 1179},
  {"Compile for 32-bit pointers", 1180},
  {"-maix64 and POWER architecture are incompatible.", 1181},
  {"-maix64 requires PowerPC64 architecture remain enabled.", 1182},
  {"\
-maix64 required: 64-bit computation with 32-bit addressing not yet \
supported.", 1183},
  {"-mmultiple is not supported on little endian systems", 1184},
  {"-mstring is not supported on little endian systems", 1185},
  {"-f%s ignored for AIX (all code is position independent)", 1186},
  {"-ffunction-sections disabled on AIX when debugging", 1187},
  {"-fdata-sections not supported on AIX", 1188},
  {"Unknown -mdebug-%s switch", 1189},
  {"invalid %%f value", 1190},
  {"invalid %%F value", 1191},
  {"invalid %%G value", 1192},
  {"invalid %%j code", 1193},
  {"invalid %%J code", 1194},
  {"invalid %%K value", 1195},
  {"invalid %%p value", 1196},
  {"invalid %%q value", 1197},
  {"%%S computed all 1's mask", 1198},
  {"%%S computed all 0's mask", 1199},
  {"invalid %%T value", 1200},
  {"invalid %%u value", 1201},
  {"invalid %%v value", 1202},
  {"invalid %%W value", 1203},
  {"Use POWER instruction set", 1204},
  {"Use POWER2 instruction set", 1205},
  {"Do not use POWER2 instruction set", 1206},
  {"Do not use POWER instruction set", 1207},
  {"Use PowerPC instruction set", 1208},
  {"Do not use PowerPC instruction set", 1209},
  {"Use PowerPC General Purpose group optional instructions", 1210},
  {"Don't use PowerPC General Purpose group optional instructions", 1211},
  {"Use PowerPC Graphics group optional instructions", 1212},
  {"Don't use PowerPC Graphics group optional instructions", 1213},
  {"Use PowerPC-64 instruction set", 1214},
  {"Don't use PowerPC-64 instruction set", 1215},
  {"Use new mnemonics for PowerPC architecture", 1216},
  {"Use old mnemonics for PowerPC architecture", 1217},
  {"Put everything in the regular TOC", 1218},
  {"Place floating point constants in TOC", 1219},
  {"Don't place floating point constants in TOC", 1220},
  {"Place symbol+offset constants in TOC", 1221},
  {"Don't place symbol+offset constants in TOC", 1222},
  {"Place variable addresses in the regular TOC", 1223},
  {"Generate load/store multiple instructions", 1224},
  {"Do not generate load/store multiple instructions", 1225},
  {"Generate string instructions for block moves", 1226},
  {"Do not generate string instructions for block moves", 1227},
  {"Generate load/store with update instructions", 1228},
  {"Do not generate load/store with update instructions", 1229},
  {"Generate fused multiply/add instructions", 1230},
  {"Don't generate fused multiply/add instructions", 1231},
  {"Don't schedule the start and end of the procedure", 1232},
  {"Use features of and schedule code for given CPU", 1233},
  {"Enable debug output", 1234},
  {"RETURN_ADDRESS_OFFSET not supported", 1235},
  {"Select ABI calling convention.", 1236},
  {"Select method for sdata handling.", 1237},
  {"Align to the base type of the bitfield.", 1238},
  {"Don't align to the base type of the bitfield.", 1239},
  {"Don't assume that unaligned accesses are handled by the system", 1240},
  {"Assume that unaligned accesses are handled by the system", 1241},
  {"Produce code relocatable at runtime.", 1242},
  {"Don't produce code relocatable at runtime.", 1243},
  {"Produce little endian code.", 1244},
  {"Produce big endian code.", 1245},
  {"Use 128 bit long doubles", 1246},
  {"no description yet", 1247},
  {"Use EABI.", 1248},
  {"Don't use EABI.", 1249},
  {"Use alternate register names.", 1250},
  {"Don't use alternate register names.", 1251},
  {"Link with libsim.a, libc.a and sim-crt0.o.", 1252},
  {"Link with libads.a, libc.a and crt0.o.", 1253},
  {"Link with libyk.a, libc.a and crt0.o.", 1254},
  {"Link with libmvme.a, libc.a and crt0.o.", 1255},
  {"Set the PPC_EMB bit in the ELF flags header", 1256},
  {"Bad value for -mcall-%s", 1257},
  {"Bad value for -msdata=%s", 1258},
  {"-mrelocatable and -msdata=%s are incompatible.", 1259},
  {"-f%s and -msdata=%s are incompatible.", 1260},
  {"-msdata=%s and -mcall-%s are incompatible.", 1261},
  {"-mrelocatable and -mno-minimal-toc are incompatible.", 1262},
  {"-mrelocatable and -mcall-%s are incompatible.", 1263},
  {"-fPIC and -mcall-%s are incompatible.", 1264},
  {"-mcall-aixdesc must be big endian", 1265},
  {"Generate code for big endian", 1266},
  {"Generate code for little endian", 1267},
  {"%s is not supported by this configuration", 1268},
  {"-mptr%d not allowed on -m%d", 1269},
  {"-mlong-double-64 not allowed with -m64", 1270},
  {"bad value (%s) for -mcmodel= switch", 1271},
  {"-mcmodel= is not supported on 32 bit systems", 1272},
  {"profiling does not support code models other than medlow", 1273},
  {"Invalid %%Y operand", 1274},
  {"Invalid %%A operand", 1275},
  {"Invalid %%B operand", 1276},
  {"Invalid %%c operand", 1277},
  {"Invalid %%C operand", 1278},
  {"Invalid %%d operand", 1279},
  {"Invalid %%D operand", 1280},
  {"Invalid %%f operand", 1281},
  {"long long constant not a valid immediate operand", 1282},
  {"floating point constant not a valid immediate operand", 1283},
  {"%s and profiling conflict: disabling %s", 1284},
  {"Use FUNCTION_EPILOGUE", 1285},
  {"Do not use FUNCTION_EPILOGUE", 1286},
  {"Assume possible double misalignment", 1287},
  {"Assume all doubles are aligned", 1288},
  {"Pass -assert pure-text to linker", 1289},
  {"Do not pass -assert pure-text to linker", 1290},
  {"Use flat register window model", 1291},
  {"Do not use flat register window model", 1292},
  {"Use ABI reserved registers", 1293},
  {"Do not use ABI reserved registers", 1294},
  {"Use hardware quad fp instructions", 1295},
  {"Do not use hardware quad fp instructions", 1296},
  {"Compile for v8plus ABI", 1297},
  {"Do not compile for v8plus ABI", 1298},
  {"Utilize Visual Instruction Set", 1299},
  {"Do not utilize Visual Instruction Set", 1300},
  {"Optimize for Cypress processors", 1301},
  {"Optimize for SparcLite processors", 1302},
  {"Optimize for F930 processors", 1303},
  {"Optimize for F934 processors", 1304},
  {"Use V8 Sparc ISA", 1305},
  {"Optimize for SuperSparc processors", 1306},
  {"Pointers are 64-bit", 1307},
  {"Pointers are 32-bit", 1308},
  {"Use 32-bit ABI", 1309},
  {"Use 64-bit ABI", 1310},
  {"Use stack bias", 1311},
  {"Do not use stack bias", 1312},
  {"Use structs on stronger alignment for double-word copies", 1313},
  {"Do not use structs on stronger alignment for double-word copies", 1314},
  {"Optimize tail call instructions in assembler and linker", 1315},
  {"Do not optimize tail call instructions in assembler or linker", 1316},
  {"Use given Sparc code model", 1317},
  {"%s=%s is not numeric.", 1318},
  {"%s=%s is too large.", 1319},
  {"a data area attribute cannot be specified for local variables", 1320},
  {"data area of '%s' conflicts with previous declaration", 1321},
  {"Bogus JR construction: %d\n", 1322},
  {"Bad amount of stack space removal: %d", 1323},
  {"Bogus JARL construction: %d\n", 1324},
  {"#pragma GHS endXXXX found without previous startXXX", 1325},
  {"#pragma GHS endXXX does not match previous startXXX", 1326},
  {"Cannot set interrupt attribute: no current function", 1327},
  {"Cannot set interrupt attribute: no such identifier", 1328},
  {"junk at end of #pragma ghs section", 1329},
  {"unrecognised section name \"%s\"", 1330},
  {"malformed #pragma ghs section", 1331},
  {"junk at end of #pragma ghs interrupt", 1332},
  {"junk at end of #pragma ghs starttda", 1333},
  {"junk at end of #pragma ghs startsda", 1334},
  {"junk at end of #pragma ghs startzda", 1335},
  {"junk at end of #pragma ghs endtda", 1336},
  {"junk at end of #pragma ghs endsda", 1337},
  {"junk at end of #pragma ghs endzda", 1338},
  {"Support Green Hills ABI", 1339},
  {"Prohibit PC relative function calls", 1340},
  {"Reuse r30 on a per function basis", 1341},
  {"Use stubs for function prologues", 1342},
  {"Same as: -mep -mprolog-function", 1343},
  {"Enable backend debugging", 1344},
  {"Compile for the v850 processor", 1345},
  {"Use 4 byte entries in switch tables", 1346},
  {"Set the max size of data eligible for the TDA area", 1347},
  {"Set the max size of data eligible for the SDA area", 1348},
  {"Set the max size of data eligible for the ZDA area", 1349},
  {"cannot convert to a pointer type", 1350},
  {"pointer value used where a floating point value was expected", 1351},
  {"aggregate value used where a float was expected", 1352},
  {"conversion to incomplete type", 1353},
  {"can't convert between vector values of different size", 1354},
  {"aggregate value used where an integer was expected", 1355},
  {"pointer value used where a complex was expected", 1356},
  {"aggregate value used where a complex was expected", 1357},
  {"can't convert value to a vector", 1358},
  {"unable to call pointer to member function here", 1359},
  {"destructors take no parameters", 1360},
  {"ISO C++ forbids omitting the middle term of a ?: expression", 1361},
  {"internal inconsistency: binfo offset error for rtti", 1362},
  {"conflicting access specifications for field `%s', ignored", 1363},
  {"trying to finish struct, but kicked out due to previous parse errors.", 1364},
  {"language string `\"%s\"' not recognized", 1365},
  {"not enough type information", 1366},
  {"invalid operation on uninstantiated type", 1367},
  {"\
object size exceeds built-in limit for virtual function table implementation", 1368},
  {"\
object size exceeds normal limit for virtual function table implementation, \
recompile all source and use -fhuge-objects", 1369},
  {"internal compiler error: debugging info corrupted", 1370},
  {"parse errors have confused me too much", 1371},
  {"declaration of `%s' shadows a member of `this'", 1372},
  {"label `%s' referenced outside of any function", 1373},
  {"jump to case label", 1374},
  {"  enters try block", 1375},
  {"  from here", 1376},
  {"`default' label not within a switch statement", 1377},
  {"pointers are not permitted as case values", 1378},
  {"ISO C++ forbids range expressions in switch statement", 1379},
  {"empty range specified", 1380},
  {"duplicate (or overlapping) case value", 1381},
  {"where case label appears here", 1382},
  {"\
(enclose actions of previous case statements requiring destructors in their \
own scope.)", 1383},
  {"virtual memory exhausted", 1384},
  {"the new ABI requires vtable thunks", 1385},
  {"an anonymous union cannot have function members", 1386},
  {"multiple types in one declaration", 1387},
  {"declaration does not declare anything", 1388},
  {"ISO C++ prohibits anonymous structs", 1389},
  {"assignment (not initialization) in declaration", 1390},
  {"invalid catch parameter", 1391},
  {"cannot declare `::main' to be a template", 1392},
  {"cannot declare `::main' to be inline", 1393},
  {"cannot declare `::main' to be static", 1394},
  {"`main' must return `int'", 1395},
  {"overflow in array dimension", 1396},
  {"destructors must be member functions", 1397},
  {"`bool' is now a keyword", 1398},
  {"ISO C++ does not support `long long'", 1399},
  {"short, signed or unsigned invalid for `%s'", 1400},
  {"long and short specified together for `%s'", 1401},
  {"signed and unsigned given together for `%s'", 1402},
  {"storage class specifiers invalid in parameter declarations", 1403},
  {"typedef declaration invalid in parameter declaration", 1404},
  {"virtual outside class declaration", 1405},
  {"storage class specified for %s `%s'", 1406},
  {"storage class specifiers invalid in friend function declarations", 1407},
  {"destructor cannot be static member function", 1408},
  {"constructor cannot be static member function", 1409},
  {"constructors cannot be declared virtual", 1410},
  {"return value type specifier for constructor ignored", 1411},
  {"can't initialize friend function `%s'", 1412},
  {"virtual functions cannot be friends", 1413},
  {"friend declaration not in class definition", 1414},
  {"cannot declare %s to references", 1415},
  {"invalid type: `void &'", 1416},
  {"discarding `const' applied to a reference", 1417},
  {"discarding `volatile' applied to a reference", 1418},
  {"only declarations of constructors can be `explicit'", 1419},
  {"non-member `%s' cannot be declared `mutable'", 1420},
  {"non-object member `%s' cannot be declared `mutable'", 1421},
  {"function `%s' cannot be declared `mutable'", 1422},
  {"static `%s' cannot be declared `mutable'", 1423},
  {"const `%s' cannot be declared `mutable'", 1424},
  {"typedef declaration includes an initializer", 1425},
  {"unnamed variable or field declared void", 1426},
  {"variable or field declared void", 1427},
  {"cannot use `::' in parameter declaration", 1428},
  {"declaration of `%s' as void", 1429},
  {"`%s' is neither function nor member function; cannot be declared friend", 1430},
  {"member functions are implicitly friends of their class", 1431},
  {"storage class `auto' invalid for function `%s'", 1432},
  {"storage class `register' invalid for function `%s'", 1433},
  {"\
storage class `static' invalid for function `%s' declared out of global scope", 1434},
  {"\
storage class `inline' invalid for function `%s' declared out of global scope", 1435},
  {"virtual non-class function `%s'", 1436},
  {"cannot declare static function inside another function", 1437},
  {"\
invalid integer constant in parameter list, did you forget to give parameter \
name?", 1438},
  {"parameter invalidly declared method type", 1439},
  {"parameter invalidly declared offset type", 1440},
  {"`void' in parameter list must be entire list", 1441},
  {"conversion to %s%s will never use a type conversion operator", 1442},
  {"return type for `main' changed to `int'", 1443},
  {"no return statement in function returning non-void", 1444},
  {"-f%s is no longer supported", 1445},
  {"\
-fhandle-exceptions has been renamed to -fexceptions (and is now on by \
default)", 1446},
  {"no file specified with -fdump-translation-unit", 1447},
  {"-Wno-strict-prototypes is not supported in C++", 1448},
  {"name missing for member function", 1449},
  {"`__alignof__' applied to a bit-field", 1450},
  {"parser may be lost: is there a '{' missing somewhere?", 1451},
  {"ambiguous conversion for array subscript", 1452},
  {"anachronistic use of array size in vector delete", 1453},
  {"\
cannot delete a function.  Only pointer-to-objects are valid arguments to \
`delete'", 1454},
  {"initializer invalid for static member with constructor", 1455},
  {"(an out of class initialization is required)", 1456},
  {"field initializer is not constant", 1457},
  {"anonymous struct not inside named type", 1458},
  {"namespace-scope anonymous aggregates must be static", 1459},
  {"anonymous aggregate with no members", 1460},
  {"`operator new' must return type `void *'", 1461},
  {"`operator new' takes type `size_t' parameter", 1462},
  {"`operator new' takes type `size_t' as first parameter", 1463},
  {"`operator delete' must return type `void'", 1464},
  {"`operator delete' takes type `void *' as first parameter", 1465},
  {"second argument to `operator delete' must be of type `size_t'", 1466},
  {"too many arguments in declaration of `operator delete'", 1467},
  {"`...' invalid in specification of `operator delete'", 1468},
  {"too many initialization functions required", 1469},
  {"use of old-style cast", 1470},
  {"`%s' not supported by dump_type", 1471},
  {"`%s' not supported by dump_type_prefix", 1472},
  {"`%s' not supported by dump_type_suffix", 1473},
  {"`%s' not supported by dump_decl", 1474},
  {"`%s' not supported by dump_expr", 1475},
  {"In %s `%s':", 1476},
  {"call to Java `catch' or `throw', while `jthrowable' undefined", 1477},
  {"mixing C++ and Java `catch'es in single translation unit", 1478},
  {"  in thrown expression", 1479},
  {"\
(if this is not what you intended, make sure the function template has \
already been declared and add <> after the function name here) \
-Wno-non-template-friend disables this warning.", 1480},
  {"argument to `%s' missing\n", 1481},
  {"initializer list treated as compound expression", 1482},
  {"  will be re-ordered to match declaration order", 1483},
  {"  will be re-ordered to match inheritance order", 1484},
  {"base class initializer specified, but no base class to initialize", 1485},
  {"initializer for unnamed base class ambiguous", 1486},
  {"no base class to initialize", 1487},
  {"object missing in use of pointer-to-member construct", 1488},
  {"at this point in file", 1489},
  {"new of array type fails to specify size", 1490},
  {"size in array new must have integral type", 1491},
  {"zero size array reserves no space", 1492},
  {"new cannot be applied to a reference type", 1493},
  {"new cannot be applied to a function type", 1494},
  {"call to Java constructor, while `jclass' undefined", 1495},
  {"invalid type `void' for new", 1496},
  {"call to Java constructor, while `%s' undefined", 1497},
  {"initializer list being treated as compound expression", 1498},
  {"initializer list appears where operand should be used", 1499},
  {"initialization of array from dissimilar array type", 1500},
  {"initializer ends prematurely", 1501},
  {"cannot initialize multi-dimensional array with initializer", 1502},
  {"unknown array size in delete", 1503},
  {"type to vector delete is neither pointer or array type", 1504},
  {"type name expected before `*'", 1505},
  {"cannot declare references to references", 1506},
  {"cannot declare pointers to references", 1507},
  {"type name expected before `&'", 1508},
  {"semicolon missing after %s declaration", 1509},
  {"junk at end of #pragma %s", 1510},
  {"invalid #pragma %s", 1511},
  {"#pragma implementation for %s appears after file is included", 1512},
  {"\
(Each undeclared identifier is reported only once for each function it \
appears in.)", 1513},
  {"name lookup of `%s' changed", 1514},
  {"name lookup of `%s' changed for new ISO `for' scoping", 1515},
  {"conversion of %s as template parameter", 1516},
  {"methods cannot be converted to function pointers", 1517},
  {"ambiguous request for method pointer `%s'", 1518},
  {"request for member `%s' is ambiguous in multiple inheritance lattice", 1519},
  {"invalid default template argument", 1520},
  {"no base or member initializers given following ':'", 1521},
  {"base initializers not allowed for non-member functions", 1522},
  {"only constructors take base initializers", 1523},
  {"anachronistic old style base class initializer", 1524},
  {"`>>' should be `> >' in template class name", 1525},
  {"ISO C++ forbids an empty condition for `%s'", 1526},
  {"ISO C++ forbids `&&'", 1527},
  {"ISO C++ forbids initialization of new expression with `='", 1528},
  {"ISO C++ forbids constructor-expressions", 1529},
  {"ISO C++ forbids braced-groups within expressions", 1530},
  {"sigof type specifier", 1531},
  {"`sigof' applied to non-aggregate expression", 1532},
  {"`sigof' applied to non-aggregate type", 1533},
  {"storage class specifier `%s' not allowed after struct or class", 1534},
  {"type specifier `%s' not allowed after struct or class", 1535},
  {"type qualifier `%s' not allowed after struct or class", 1536},
  {"no body nor ';' separates two class, struct or union declarations", 1537},
  {"multiple access specifiers", 1538},
  {"multiple `virtual' specifiers", 1539},
  {"missing ';' before right brace", 1540},
  {"ISO C++ forbids array dimensions with parenthesized type in new", 1541},
  {"ISO C++ forbids label declarations", 1542},
  {"ISO C++ forbids computed gotos", 1543},
  {"label must be followed by statement", 1544},
  {"ISO C++ forbids compound statements inside for initializations", 1545},
  {"possibly missing ')'", 1546},
  {"type specifier omitted for parameter", 1547},
  {"  a template type parameter must begin with `class' or `typename'", 1548},
  {"creating array with size zero", 1549},
  {"use of `%s' in template", 1550},
  {"incomplete type unification", 1551},
  {"use of `%s' in template type unification", 1552},
  {"-frepo must be used with -c", 1553},
  {"mysterious repository information in %s", 1554},
  {"can't create repository information file `%s'", 1555},
  {"taking dynamic typeid of object with -fno-rtti", 1556},
  {"cannot use typeid with -fno-rtti", 1557},
  {"must #include <typeinfo> before using typeid", 1558},
  {"adjusting pointers for covariant returns", 1559},
  {"recoverable compiler error, fixups for virtual function", 1560},
  {"identifier name `%s' conflicts with GNU C++ internal naming strategy", 1561},
  {"syntax error before '#' token", 1562},
  {"syntax error before '\\' token", 1563},
  {"keyword 'export' not implemented and will be ignored", 1564},
  {"parse error at end of saved function text", 1565},
  {"parse error in method specification", 1566},
  {"function body for constructor missing", 1567},
  {"non-lvalue in %s", 1568},
  {"`com_interface' only supported with -fvtable-thunks", 1569},
  {"`com_interface' attribute can only be applied to class definitions", 1570},
  {"requested init_priority is not an integer constant", 1571},
  {"\
can only use init_priority attribute on file-scope definitions of objects of \
class type", 1572},
  {"requested init_priority is out of range", 1573},
  {"requested init_priority is reserved for internal use", 1574},
  {"\
ISO C++ forbids %s between pointer of type `void *' and pointer-to-function", 1575},
  {"ISO C++ forbids applying `sizeof' to a function type", 1576},
  {"ISO C++ forbids applying `sizeof' to a member function", 1577},
  {"\
ISO C++ forbids applying `sizeof' to type `void' which is an incomplete type", 1578},
  {"sizeof applied to a bit-field", 1579},
  {"ISO C++ forbids applying `sizeof' to an expression of function type", 1580},
  {"invalid reference to NULL ptr, use ptr-to-member instead", 1581},
  {"invalid use of `%s' on pointer to member", 1582},
  {"invalid type argument", 1583},
  {"ISO C++ forbids subscripting non-lvalue array", 1584},
  {"subscripting array declared `register'", 1585},
  {"pointer to member function called, but not in class scope", 1586},
  {"\
invalid call to member function needing `this' in static member function \
scope", 1587},
  {"ISO C++ forbids calling `::main' from within program", 1588},
  {"parameter type of called function is incomplete", 1589},
  {"%s rotate count is negative", 1590},
  {"%s rotate count >= width of type", 1591},
  {"ISO C++ forbids comparison between pointer and integer", 1592},
  {"comparison between signed and unsigned integer expressions", 1593},
  {"ISO C++ forbids using pointer of type `void *' in pointer arithmetic", 1594},
  {"ISO C++ forbids using a pointer-to-function in pointer arithmetic", 1595},
  {"\
ISO C++ forbids using a pointer to member function in pointer arithmetic", 1596},
  {"ISO C++ forbids using pointer to a member in pointer arithmetic", 1597},
  {"ISO C++ forbids using pointer of type `void *' in subtraction", 1598},
  {"ISO C++ forbids using pointer to a function in subtraction", 1599},
  {"ISO C++ forbids using pointer to a method in subtraction", 1600},
  {"ISO C++ forbids using pointer to a member in subtraction", 1601},
  {"invalid use of a pointer to an incomplete type in pointer arithmetic", 1602},
  {"taking address of temporary", 1603},
  {"ISO C++ forbids %sing an enum", 1604},
  {"cast to non-reference type used as lvalue", 1605},
  {"ISO C++ forbids taking address of function `::main'", 1606},
  {"ISO C++ forbids taking the address of a cast to a non-lvalue expression", 1607},
  {"unary `&'", 1608},
  {"cannot take the address of `this', which is an ravlue expression", 1609},
  {"\
ISO C++ forbids casting between pointer-to-function and pointer-to-object", 1610},
  {"ISO C++ forbids casting to an array type", 1611},
  {"ISO C++ forbids cast to non-reference type used as lvalue", 1612},
  {"ISO C++ forbids assignment of arrays", 1613},
  {"return value from function receives multiple initializations", 1614},
  {"   in pointer to member function conversion", 1615},
  {"   in pointer to member conversion", 1616},
  {"returning reference to temporary", 1617},
  {"reference to non-lvalue returned", 1618},
  {"returning a value from a destructor", 1619},
  {"cannot return from a handler of a function-try-block of a constructor", 1620},
  {"returning a value from a constructor", 1621},
  {"\
return-statement with no value, in function declared with a non-void return \
type", 1622},
  {"\
return-statement with a value, in function declared with a void return type", 1623},
  {"  since the following virtual functions are abstract:", 1624},
  {"Internal error #%d.", 1625},
  {"due to the presence of a constructor", 1626},
  {"comma expression used to initialize return value", 1627},
  {"cannot initialize arrays using this syntax", 1628},
  {"ANSI C++ forbids non-constant aggregate initializer expressions", 1629},
  {"initializing array with parameter list", 1630},
  {"initializer for scalar variable requires one element", 1631},
  {"aggregate has a partly bracketed initializer", 1632},
  {"non-trivial labeled initializers", 1633},
  {"non-empty initializer for array of empty elements", 1634},
  {"initializer list for object of class with virtual base classes", 1635},
  {"initializer list for object of class with base classes", 1636},
  {"initializer list for object using virtual functions", 1637},
  {"index value instead of field name in union initializer", 1638},
  {"excess elements in aggregate initializer", 1639},
  {"circular pointer delegation detected", 1640},
  {"result of `operator->()' yields non-pointer result", 1641},
  {"base operand of `->' is not a pointer", 1642},
  {"ISO C++ forbids defining types within %s", 1643},
  {"Can't create cross-reference file `%s'", 1644},
  {"Internal gcc abort.", 1645},
  {"In file included from %s:%u", 1646},
  {"\
,\n\
                 from %s:%u", 1647},
  {"internal error: ", 1648},
  {"warning: ", 1649},
  {"%s: %s", 1650},
  {"traditional C rejects the `U' suffix", 1651},
  {"integer constant contains digits beyond the radix", 1652},
  {"integer constant out of range", 1653},
  {"integer constant is so large that it is unsigned", 1654},
  {"invalid suffix '%.*s' on integer constant", 1655},
  {"\"%s\" is not defined", 1656},
  {"octal escape sequence out of range", 1657},
  {"hex escape sequence out of range", 1658},
  {"integer overflow in preprocessor expression", 1659},
  {"impossible operator type %s", 1660},
  {"comma operator in operand of #if", 1661},
  {"included file \"%s\" exists but is not readable", 1662},
  {"node for '%s' exists, open failed, error '%s', value %lx\n", 1663},
  {"cpp_make_system_header: bad flag %d\n", 1664},
  {"cpp_make_system_header called on non-file buffer", 1665},
  {"Multiple include guards may be useful for:\n", 1666},
  {"No include path in which to find %s", 1667},
  {"%s is too large", 1668},
  {"%s is shorter than expected\n", 1669},
  {"%s is a block device", 1670},
  {"%s is a directory", 1671},
  {"ignoring nonexistent directory \"%s\"\n", 1672},
  {"%s: Not a directory", 1673},
  {"ignoring duplicate directory \"%s\"\n", 1674},
  {"-MG must be specified with one of -M or -MM", 1675},
  {"#include \"...\" search starts here:\n", 1676},
  {"#include <...> search starts here:\n", 1677},
  {"End of search list.\n", 1678},
  {"buffers still stacked in cpp_finish", 1679},
  {"I/O error on output", 1680},
  {"Argument missing after %s", 1681},
  {"Assertion missing after %s", 1682},
  {"Directory name missing after %s", 1683},
  {"File name missing after %s", 1684},
  {"Macro name missing after %s", 1685},
  {"Path name missing after %s", 1686},
  {"Number missing after %s", 1687},
  {"Too many arguments. Type %s --help for usage info", 1688},
  {"GNU CPP version %s (cpplib)\n", 1689},
  {"Output filename specified twice", 1690},
  {"-I- specified twice", 1691},
  {"Usage: %s [switches] input output\n", 1692},
  {"\
Switches:\n\
  -include <file>           Include the contents of <file> before other \
files\n\
  -imacros <file>           Accept definition of macros in <file>\n\
  -iprefix <path>           Specify <path> as a prefix for next two options\n\
  -iwithprefix <dir>        Add <dir> to the end of the system include path\n\
  -iwithprefixbefore <dir>  Add <dir> to the end of the main include path\n\
  -isystem <dir>            Add <dir> to the start of the system include \
path\n", 1693},
  {"\
  -idirafter <dir>          Add <dir> to the end of the system include path\n\
  -I <dir>                  Add <dir> to the end of the main include path\n\
  -I-                       Fine-grained include path control; see info \
docs\n\
  -nostdinc                 Do not search system include directories\n\
                             (dirs specified with -isystem will still be \
used)\n\
  -nostdinc++               Do not search system include directories for \
C++\n\
  -o <file>                 Put output into <file>\n", 1694},
  {"\
  -pedantic                 Issue all warnings demanded by strict ISO C\n\
  -pedantic-errors          Issue -pedantic warnings as errors instead\n\
  -trigraphs                Support ISO C trigraphs\n\
  -lang-c                   Assume that the input sources are in C\n\
  -lang-c89                 Assume that the input sources are in C89\n", 1695},
  {"\
  -lang-c++                 Assume that the input sources are in C++\n\
  -lang-objc                Assume that the input sources are in ObjectiveC\n\
  -lang-objc++              Assume that the input sources are in \
ObjectiveC++\n\
  -lang-asm                 Assume that the input sources are in assembler\n", 1696},
  {"\
  -std=<std name>           Specify the conformance standard; one of:\n\
                            gnu89, gnu99, c89, c99, iso9899:1990,\n\
                            iso9899:199409, iso9899:1999\n\
  -+                        Allow parsing of C++ style features\n\
  -w                        Inhibit warning messages\n\
  -Wtrigraphs               Warn if trigraphs are encountered\n\
  -Wno-trigraphs            Do not warn about trigraphs\n\
  -Wcomment{s}              Warn if one comment starts inside another\n", 1697},
  {"\
  -Wno-comment{s}           Do not warn about comments\n\
  -Wtraditional             Warn about features not present in traditional \
C\n\
  -Wno-traditional          Do not warn about traditional C\n\
  -Wundef                   Warn if an undefined macro is used by #if\n\
  -Wno-undef                Do not warn about testing undefined macros\n\
  -Wimport                  Warn about the use of the #import directive\n", 1698},
  {"\
  -Wno-import               Do not warn about the use of #import\n\
  -Werror                   Treat all warnings as errors\n\
  -Wno-error                Do not treat warnings as errors\n\
  -Wall                     Enable all preprocessor warnings\n\
  -M                        Generate make dependencies\n\
  -MM                       As -M, but ignore system header files\n", 1699},
  {"\
  -MD                       As -M, but put output in a .d file\n\
  -MMD                      As -MD, but ignore system header files\n\
  -MG                       Treat missing header file as generated files\n\
  -g3                       Include #define and #undef directives in the \
output\n\
  -D<macro>                 Define a <macro> with string '1' as its value\n\
  -D<macro>=<val>           Define a <macro> with <val> as its value\n", 1700},
  {"\
  -A<question> (<answer>)   Assert the <answer> to <question>\n\
  -A-<question> (<answer>)  Disable the <answer> to <question>\n\
  -U<macro>                 Undefine <macro> \n\
  -v                        Display the version number\n\
  -H                        Print the name of header files as they are used\n\
  -C                        Do not discard comments\n", 1701},
  {"\
  -dM                       Display a list of macro definitions active at \
end\n\
  -dD                       Preserve macro definitions in output\n\
  -dN                       As -dD except that only the names are preserved\n\
  -dI                       Include #include directives in the output\n\
  -ftabstop=<number>        Distance between tab stops for column reporting\n\
  -P                        Do not generate #line directives\n\
  -$                        Do not allow '$' in identifiers\n", 1702},
  {"\
  -remap                    Remap file names when including files.\n\
  --version                 Display version information\n\
  -h or --help              Display this information\n", 1703},
  {"missing terminating > character", 1704},
  {"trigraph ??%c converted to %c", 1705},
  {"trigraph ??%c ignored", 1706},
  {"'/*' within comment", 1707},
  {"embedded null character ignored", 1708},
  {"%s in preprocessing directive", 1709},
  {"'$' character in identifier", 1710},
  {"multi-line string constant", 1711},
  {"missing terminating %c character", 1712},
  {"possible start of unterminated string literal", 1713},
  {"null characters preserved", 1714},
  {"null character preserved", 1715},
  {"C++ style comments are not allowed in ISO C89", 1716},
  {"(this will be reported only once per input file)", 1717},
  {"comment start split across lines", 1718},
  {"multi-line comment", 1719},
  {"comment start '/*' split across lines", 1720},
  {"unterminated comment", 1721},
  {"comment end '*/' split across lines", 1722},
  {"backslash-newline at end of file", 1723},
  {"backslash and newline separated by space", 1724},
  {"K+R C ignores #\\n with the # indented", 1725},
  {"no newline at end of file", 1726},
  {"invalid preprocessing directive #%s", 1727},
  {"invalid preprocessing directive", 1728},
  {"Unspellable token %s", 1729},
  {"function macro %s must be used with arguments in traditional C", 1730},
  {"unterminated argument list for macro \"%s\"", 1731},
  {"ISO C99 requires rest arguments to be used", 1732},
  {"not enough arguments for macro \"%s\"", 1733},
  {"too many arguments for macro \"%s\"", 1734},
  {"pasting would not give a valid preprocessing token", 1735},
  {"invalid string literal, ignoring final '\\'", 1736},
  {"two tokens pushed in a row", 1737},
  {"directive begins with %s?!", 1738},
  {"macros nested too deep invoking '%s'", 1739},
  {"#%s may not be used inside a macro argument", 1740},
  {"attempt to use poisoned \"%s\"", 1741},
  {"invalid special hash type", 1742},
  {"<command line>", 1743},
  {"traditional C ignores #%s with the # indented", 1744},
  {"suggest hiding #%s from traditional C with an indented #", 1745},
  {"ISO C does not allow #%s", 1746},
  {"# followed by integer", 1747},
  {"\"defined\" cannot be used as a macro name", 1748},
  {"\"%s\" cannot be used as a macro name in C++", 1749},
  {"macro names must be identifiers", 1750},
  {"\"%s\" cannot be used as a macro name", 1751},
  {"junk on line after #undef", 1752},
  {"undefining \"%s\"", 1753},
  {"#%s expects \"FILENAME\" or <FILENAME>", 1754},
  {"empty file name in #%s", 1755},
  {"junk at end of #%s", 1756},
  {"#import is obsolete, use an #ifndef wrapper in the header file", 1757},
  {"#include_next in primary source file", 1758},
  {"invalid format #line", 1759},
  {"token after #line is not a positive integer", 1760},
  {"line number out of range", 1761},
  {"second token after #line is not a string", 1762},
  {"garbage at end of #line", 1763},
  {"invalid #ident", 1764},
  {"unknown #pragma namespace %s", 1765},
  {"#pragma once is obsolete", 1766},
  {"#pragma once outside include file", 1767},
  {"invalid #pragma poison directive", 1768},
  {"poisoning existing macro \"%s\"", 1769},
  {"#pragma system_header outside include file", 1770},
  {"cannot find source %c%s%c", 1771},
  {"current file is older than %c%.*s%c", 1772},
  {"#%s with no argument", 1773},
  {"#%s with invalid argument", 1774},
  {"garbage at end of #%s", 1775},
  {"attempt to use poisoned identifier \"%s\"", 1776},
  {"#else without #if", 1777},
  {"#else after #else", 1778},
  {"the conditional began here", 1779},
  {"#elif without #if", 1780},
  {"#elif after #else", 1781},
  {"#endif without #if", 1782},
  {"ISO C forbids text after #%s", 1783},
  {"unterminated #%s", 1784},
  {"assertion without predicate", 1785},
  {"predicate must be an identifier", 1786},
  {"missing '(' after predicate", 1787},
  {"missing ')' to complete answer", 1788},
  {"predicate's answer is empty", 1789},
  {"junk at end of assertion", 1790},
  {"\"%s\" re-asserted", 1791},
  {"<builtin>", 1792},
  {"#include nested too deep", 1793},
  {"buffer pushed with contexts stacked", 1794},
  {"Invalid option %s", 1795},
  {"malformed #pragma implementation", 1796},
  {"\"%s\" is not a valid option to the preprocessor", 1797},
  {"too many input files", 1798},
  {";; Processing block from %d to %d, %d sets.\n", 1799},
  {"%s:%d: warning: ", 1800},
  {"%s:%d: ", 1801},
  {"%s: warning: ", 1802},
  {"%s: ", 1803},
  {"((anonymous))", 1804},
  {"sorry, not implemented: ", 1805},
  {"In method `%s':", 1806},
  {"In function `%s':", 1807},
  {"Unrecognizable insn:", 1808},
  {"Insn does not satisfy its constraints:", 1809},
  {"\
Internal compiler error in %s, at %s:%d\n\
Please submit a full bug report.\n\
See %s for instructions.", 1810},
  {"DW_LOC_OP %s not implememnted yet.\n", 1811},
  {"internal regno botch: regno = %d\n", 1812},
  {"getpwd", 1813},
  {"\
Unable to access real part of complex value in a hard register on this target", 1814},
  {"\
Unable to access imaginary part of complex value in a hard register on this \
target", 1815},
  {"ICE: emit_insn used where emit_jump_insn needed:\n", 1816},
  {"additional handler after ...", 1817},
  {"Cannot duplicate non-existant exception region.", 1818},
  {"exception handling disabled, use -fexceptions to enable", 1819},
  {"Never issued previous false_label", 1820},
  {"Counted %d copies of EH region %d in list.\n", 1821},
  {"Duplicate call to __builtin_eh_return", 1822},
  {"function uses __builtin_eh_return", 1823},
  {"stack limits not supported on this target", 1824},
  {"function using short complex types cannot be inline", 1825},
  {"unsupported wide integer operation", 1826},
  {"prior parameter's size depends on `%s'", 1827},
  {"returned value in block_exit_expr", 1828},
  {"invalid `asm': %s", 1829},
  {"output_operand: %s", 1830},
  {"operand number missing after %-letter", 1831},
  {"operand number out of range", 1832},
  {"invalid %%-code", 1833},
  {"`%l' operand isn't a label", 1834},
  {"ICE: would have deleted prologue/epilogue insn", 1835},
  {"End insn %d for block %d not found in the insn stream.", 1836},
  {"Insn %d is in multiple basic blocks (%d and %d)", 1837},
  {"Head insn %d for block %d not found in the insn stream.", 1838},
  {"Basic block %i edge lists are corrupted", 1839},
  {"Basic block %d pred edge is corrupted", 1840},
  {"NOTE_INSN_BASIC_BLOCK is missing for block %d", 1841},
  {"NOTE_INSN_BASIC_BLOCK is missing for block %d\n", 1842},
  {"NOTE_INSN_BASIC_BLOCK %d in the middle of basic block %d", 1843},
  {"In basic block %d:", 1844},
  {"Basic blocks not numbered consecutively", 1845},
  {"number of bb notes in insn chain (%d) != n_basic_blocks (%d)", 1846},
  {"comparison is always %d due to width of bitfield", 1847},
  {"comparison is always %d", 1848},
  {"`or' of unmatched not-equal tests is always 1", 1849},
  {"`and' of mutually exclusive equal-tests is always 0", 1850},
  {"`%s' might be used uninitialized in this function", 1851},
  {"variable `%s' might be clobbered by `longjmp' or `vfork'", 1852},
  {"argument `%s' might be clobbered by `longjmp' or `vfork'", 1853},
  {"function returns an aggregate", 1854},
  {"unused parameter `%s'", 1855},
  {"Ambiguous abbreviation %s", 1856},
  {"Incomplete `%s' option", 1857},
  {"Missing argument to `%s' option", 1858},
  {"Extraneous argument to `%s' option", 1859},
  {"Using builtin specs.\n", 1860},
  {"\
Setting spec %s to '%s'\n\
\n", 1861},
  {"Reading specs from %s\n", 1862},
  {"specs %%include syntax malformed after %ld characters", 1863},
  {"Could not find specs file %s\n", 1864},
  {"specs %%rename syntax malformed after %ld characters", 1865},
  {"specs %s spec was not found to be renamed", 1866},
  {"rename spec %s to %s\n", 1867},
  {"\
spec is '%s'\n\
\n", 1868},
  {"specs unknown %% command after %ld characters", 1869},
  {"specs file malformed after %ld characters", 1870},
  {"spec file has no spec for linking", 1871},
  {"-pipe not supported", 1872},
  {"\
\n\
Go ahead? (y or n) ", 1873},
  {"\
Internal error: %s (program %s)\n\
Please submit a full bug report.\n\
See %s for instructions.", 1874},
  {"# %s %.2f %.2f\n", 1875},
  {"Usage: %s [options] file...\n", 1876},
  {"Options:\n", 1877},
  {"  -pass-exit-codes         Exit with highest error code from a phase\n", 1878},
  {"  --help                   Display this information\n", 1879},
  {"  (Use '-v --help' to display command line options of sub-processes)\n", 1880},
  {"  -dumpspecs               Display all of the built in spec strings\n", 1881},
  {"  -dumpversion             Display the version of the compiler\n", 1882},
  {"  -dumpmachine             Display the compiler's target processor\n", 1883},
  {"\
  -print-search-dirs       Display the directories in the compiler's search \
path\n", 1884},
  {"\
  -print-libgcc-file-name  Display the name of the compiler's companion \
library\n", 1885},
  {"  -print-file-name=<lib>   Display the full path to library <lib>\n", 1886},
  {"\
  -print-prog-name=<prog>  Display the full path to compiler component \
<prog>\n", 1887},
  {"\
  -print-multi-directory   Display the root directory for versions of \
libgcc\n", 1888},
  {"\
  -print-multi-lib         Display the mapping between command line options \
and\n\
                           multiple library search directories\n", 1889},
  {"\
  -Wa,<options>            Pass comma-separated <options> on to the \
assembler\n", 1890},
  {"\
  -Wp,<options>            Pass comma-separated <options> on to the \
preprocessor\n", 1891},
  {"\
  -Wl,<options>            Pass comma-separated <options> on to the linker\n", 1892},
  {"  -Xlinker <arg>           Pass <arg> on to the linker\n", 1893},
  {"  -save-temps              Do not delete intermediate files\n", 1894},
  {"  -pipe                    Use pipes rather than intermediate files\n", 1895},
  {"  -time                    Time the execution of each subprocess\n", 1896},
  {"\
  -specs=<file>            Override builtin specs with the contents of \
<file>\n", 1897},
  {"\
  -std=<standard>          Assume that the input sources are for <standard>\n", 1898},
  {"\
  -B <directory>           Add <directory> to the compiler's search paths\n", 1899},
  {"  -b <machine>             Run gcc for target <machine>, if installed\n", 1900},
  {"\
  -V <version>             Run gcc version number <version>, if installed\n", 1901},
  {"\
  -v                       Display the programs invoked by the compiler\n", 1902},
  {"\
  -E                       Preprocess only; do not compile, assemble or \
link\n", 1903},
  {"  -S                       Compile only; do not assemble or link\n", 1904},
  {"  -c                       Compile and assemble, but do not link\n", 1905},
  {"  -o <file>                Place the output into <file>\n", 1906},
  {"\
  -x <language>            Specify the language of the following input \
files\n\
                           Permissable languages include: c c++ assembler \
none\n\
                           'none' means revert to the default behaviour of\n\
                           guessing the language based on the file's \
extension\n", 1907},
  {"\
\n\
Options starting with -g, -f, -m, -O or -W are automatically passed on to\n\
the various sub-processes invoked by %s.  In order to pass other options\n\
on to these processes the -W<letter> options must be used.\n", 1908},
  {"argument to `-Xlinker' is missing", 1909},
  {"argument to `-specs' is missing", 1910},
  {"argument to `-specs=' is missing", 1911},
  {"argument to `-b' is missing", 1912},
  {"argument to `-B' is missing", 1913},
  {"argument to `-V' is missing", 1914},
  {"invalid version number format", 1915},
  {"cannot specify -o with -c or -S and multiple compilations", 1916},
  {"Warning: -pipe ignored since -save-temps specified", 1917},
  {"Warning: -pipe ignored since -time specified", 1918},
  {"argument to `-x' is missing", 1919},
  {"argument to `-%s' is missing", 1920},
  {"Warning: `-x %s' after last input file has no effect", 1921},
  {"Invalid specification!  Bug in cc.", 1922},
  {"Spec failure: '%%*' has not been initialised by pattern match", 1923},
  {"Warning: use of obsolete %%[ operator in specs", 1924},
  {"Processing spec %c%s%c, which is '%s'\n", 1925},
  {"Spec failure: Unrecognised spec option '%c'", 1926},
  {"unrecognized option `-%s'", 1927},
  {"install: %s%s\n", 1928},
  {"programs: %s\n", 1929},
  {"libraries: %s\n", 1930},
  {"\
\n\
For bug reporting instructions, please see:\n", 1931},
  {"gcc version %s\n", 1932},
  {"gcc driver version %s executing gcc version %s\n", 1933},
  {"No input files", 1934},
  {"%s: %s compiler not installed on this system", 1935},
  {"%s: linker input file unused since linking not done", 1936},
  {"language %s not recognized", 1937},
  {"Internal gcov abort.\n", 1938},
  {"gcov [-b] [-v] [-n] [-l] [-f] [-o OBJDIR] file\n", 1939},
  {"Could not open basic block file %s.\n", 1940},
  {"Could not open data file %s.\n", 1941},
  {"Assuming that all execution counts are zero.\n", 1942},
  {"Could not open program flow graph file %s.\n", 1943},
  {"No executable code associated with file %s.\n", 1944},
  {".da file contents exhausted too early\n", 1945},
  {".da file contents not exhausted\n", 1946},
  {"%6.2f%% of %d source lines executed in function %s\n", 1947},
  {"No executable source lines in function %s\n", 1948},
  {"%6.2f%% of %d branches executed in function %s\n", 1949},
  {"%6.2f%% of %d branches taken at least once in function %s\n", 1950},
  {"No branches in function %s\n", 1951},
  {"%6.2f%% of %d calls executed in function %s\n", 1952},
  {"No calls in function %s\n", 1953},
  {"didn't use all bb entries of graph, function %s\n", 1954},
  {"block_num = %ld, num_blocks = %d\n", 1955},
  {"ERROR: too many basic blocks in .bb file %s\n", 1956},
  {"%6.2f%% of %d source lines executed in file %s\n", 1957},
  {"No executable source lines in file %s\n", 1958},
  {"%6.2f%% of %d branches executed in file %s\n", 1959},
  {"%6.2f%% of %d branches taken at least once in file %s\n", 1960},
  {"No branches in file %s\n", 1961},
  {"%6.2f%% of %d calls executed in file %s\n", 1962},
  {"No calls in file %s\n", 1963},
  {"Could not open source file %s.\n", 1964},
  {"Could not open output file %s.\n", 1965},
  {"Creating %s.\n", 1966},
  {"call %d never executed\n", 1967},
  {"call %d returns = %d\n", 1968},
  {"call %d returns = %d%%\n", 1969},
  {"branch %d never executed\n", 1970},
  {"branch %d taken = %d\n", 1971},
  {"branch %d taken = %d%%\n", 1972},
  {"Unexpected EOF while reading source file %s.\n", 1973},
  {"%s: option `%s' is ambiguous\n", 1974},
  {"%s: option `--%s' doesn't allow an argument\n", 1975},
  {"%s: option `%c%s' doesn't allow an argument\n", 1976},
  {"%s: option `%s' requires an argument\n", 1977},
  {"%s: unrecognized option `--%s'\n", 1978},
  {"%s: unrecognized option `%c%s'\n", 1979},
  {"%s: illegal option -- %c\n", 1980},
  {"%s: invalid option -- %c\n", 1981},
  {"%s: option requires an argument -- %c\n", 1982},
  {"%s: option `-W %s' is ambiguous\n", 1983},
  {"%s: option `-W %s' doesn't allow an argument\n", 1984},
  {"fix_sched_param: unknown param: %s", 1985},
  {"no memory", 1986},
  {"varargs function cannot be inline", 1987},
  {"function using alloca cannot be inline", 1988},
  {"function using setjmp cannot be inline", 1989},
  {"function with nested functions cannot be inline", 1990},
  {"function with label addresses used in initializers cannot inline", 1991},
  {"function too large to be inline", 1992},
  {"no prototype, and parameter address used; cannot be inline", 1993},
  {"inline functions not supported for this return value type", 1994},
  {"function with varying-size return value cannot be inline", 1995},
  {"function with varying-size parameter cannot be inline", 1996},
  {"function with transparent unit parameter cannot be inline", 1997},
  {"function with computed jump cannot inline", 1998},
  {"function with nonlocal goto cannot be inline", 1999},
  {"function with complex parameters cannot be inline", 2000},
  {"function with target specific attribute(s) cannot be inlined", 2001},
  {"Objective-C text in C source file", 2002},
  {"no class name specified as argument to -fconstant-string-class", 2003},
  {"object does not conform to the `%s' protocol", 2004},
  {"class `%s' does not implement the `%s' protocol", 2005},
  {"`%s' cannot be statically allocated", 2006},
  {"statically allocated objects not supported", 2007},
  {"Unexpected type for `id' (%s)", 2008},
  {"Undefined type `id', please import <objc/objc.h>", 2009},
  {"Cannot find protocol declaration for `%s'", 2010},
  {"Cannot find interface declaration for `%s'", 2011},
  {"Cannot find class `%s'", 2012},
  {"Class `%s' already exists", 2013},
  {"Cannot find interface declaration for `%s', superclass of `%s'", 2014},
  {"Circular inheritance in interface declaration for `%s'", 2015},
  {"inconsistent instance variable specification", 2016},
  {"multiple declarations for method `%s'", 2017},
  {"invalid receiver type `%s'", 2018},
  {"`%s' does not respond to `%s'", 2019},
  {"no super class declared in interface for `%s'", 2020},
  {"cannot find class (factory) method.", 2021},
  {"return type for `%s' defaults to id", 2022},
  {"method `%s' not implemented by protocol.", 2023},
  {"return type defaults to id", 2024},
  {"cannot find method.", 2025},
  {"instance variable `%s' accessed in class method", 2026},
  {"duplicate definition of class method `%s'.", 2027},
  {"duplicate declaration of class method `%s'.", 2028},
  {"duplicate definition of instance method `%s'.", 2029},
  {"duplicate declaration of instance method `%s'.", 2030},
  {"duplicate interface declaration for category `%s(%s)'", 2031},
  {"instance variable `%s' is declared private", 2032},
  {"instance variable `%s' is declared %s", 2033},
  {"static access to object of type `id'", 2034},
  {"incomplete implementation of class `%s'", 2035},
  {"incomplete implementation of category `%s'", 2036},
  {"method definition for `%c%s' not found", 2037},
  {"%s `%s' does not fully implement the `%s' protocol", 2038},
  {"reimplementation of class `%s'", 2039},
  {"conflicting super class name `%s'", 2040},
  {"duplicate interface declaration for class `%s'", 2041},
  {"duplicate declaration for protocol `%s'", 2042},
  {"[super ...] must appear in a method context", 2043},
  {"potential selector conflict for method `%s'", 2044},
  {"`@end' must appear in an implementation context", 2045},
  {"method definition not in class context", 2046},
  {"Arc profiling: some edge counts were bad.", 2047},
  {"file %s not found, execution counts assumed to be zero.", 2048},
  {"%s: internal abort\n", 2049},
  {"%s: error writing file `%s': %s\n", 2050},
  {"%s: usage '%s [ -VqfnkN ] [ -i <istring> ] [ filename ... ]'\n", 2051},
  {"%s: usage '%s [ -VqfnkNlgC ] [ -B <dirname> ] [ filename ... ]'\n", 2052},
  {"%s: warning: no read access for file `%s'\n", 2053},
  {"%s: warning: no write access for file `%s'\n", 2054},
  {"%s: warning: no write access for dir containing `%s'\n", 2055},
  {"%s: invalid file name: %s\n", 2056},
  {"%s: %s: can't get status: %s\n", 2057},
  {"\
\n\
%s: fatal error: aux info file corrupted at line %d\n", 2058},
  {"%s:%d: declaration of function `%s' takes different forms\n", 2059},
  {"%s: compiling `%s'\n", 2060},
  {"%s: wait: %s\n", 2061},
  {"%s: subprocess got fatal signal %d\n", 2062},
  {"%s: %s exited with status %d\n", 2063},
  {"%s: warning: missing SYSCALLS file `%s'\n", 2064},
  {"%s: can't read aux info file `%s': %s\n", 2065},
  {"%s: can't get status of aux info file `%s': %s\n", 2066},
  {"%s: can't open aux info file `%s' for reading: %s\n", 2067},
  {"%s: error reading aux info file `%s': %s\n", 2068},
  {"%s: error closing aux info file `%s': %s\n", 2069},
  {"%s: can't delete aux info file `%s': %s\n", 2070},
  {"%s: can't delete file `%s': %s\n", 2071},
  {"%s: warning: can't rename file `%s' to `%s': %s\n", 2072},
  {"%s: conflicting extern definitions of '%s'\n", 2073},
  {"%s: declarations of '%s' will not be converted\n", 2074},
  {"%s: conflict list for '%s' follows:\n", 2075},
  {"%s: warning: using formals list from %s(%d) for function `%s'\n", 2076},
  {"%s: %d: `%s' used but missing from SYSCALLS\n", 2077},
  {"%s: %d: warning: no extern definition for `%s'\n", 2078},
  {"%s: warning: no static definition for `%s' in file `%s'\n", 2079},
  {"%s: multiple static defs of `%s' in file `%s'\n", 2080},
  {"%s: %d: warning: source too confusing\n", 2081},
  {"%s: %d: warning: varargs function declaration not converted\n", 2082},
  {"%s: declaration of function `%s' not converted\n", 2083},
  {"%s: warning: too many parameter lists in declaration of `%s'\n", 2084},
  {"\
\n\
%s: warning: too few parameter lists in declaration of `%s'\n", 2085},
  {"%s: %d: warning: found `%s' but expected `%s'\n", 2086},
  {"%s: local declaration for function `%s' not inserted\n", 2087},
  {"\
\n\
%s: %d: warning: can't add declaration of `%s' into macro call\n", 2088},
  {"%s: global declarations for file `%s' not inserted\n", 2089},
  {"%s: definition of function `%s' not converted\n", 2090},
  {"%s: %d: warning: definition of %s not converted\n", 2091},
  {"%s: found definition of `%s' at %s(%d)\n", 2092},
  {"%s: %d: warning: `%s' excluded by preprocessing\n", 2093},
  {"%s: function definition not converted\n", 2094},
  {"%s: `%s' not converted\n", 2095},
  {"%s: would convert file `%s'\n", 2096},
  {"%s: converting file `%s'\n", 2097},
  {"%s: can't get status for file `%s': %s\n", 2098},
  {"%s: can't open file `%s' for reading: %s\n", 2099},
  {"\
\n\
%s: error reading input file `%s': %s\n", 2100},
  {"%s: can't create/open clean file `%s': %s\n", 2101},
  {"%s: warning: file `%s' already saved in `%s'\n", 2102},
  {"%s: can't link file `%s' to `%s': %s\n", 2103},
  {"%s: can't create/open output file `%s': %s\n", 2104},
  {"%s: can't change mode of file `%s': %s\n", 2105},
  {"%s: cannot get working directory: %s\n", 2106},
  {"%s: input file names must have .c suffixes: %s\n", 2107},
  {"conversion from NaN to int", 2108},
  {"conversion from NaN to unsigned int", 2109},
  {"floating point overflow", 2110},
  {"overflow on truncation to integer", 2111},
  {"overflow on truncation to unsigned integer", 2112},
  {"%s: argument domain error", 2113},
  {"%s: function singularity", 2114},
  {"%s: overflow range error", 2115},
  {"%s: underflow range error", 2116},
  {"%s: total loss of precision", 2117},
  {"%s: partial loss of precision", 2118},
  {"%s: NaN - producing operation", 2119},
  {"Output constraint %d must specify a single register", 2120},
  {"Output regs must be grouped at top of stack", 2121},
  {"Implicitly popped regs must be grouped at top of stack", 2122},
  {"Output operand %d must use `&' constraint", 2123},
  {"can't use '%s' as a %s register", 2124},
  {"unknown register name: %s", 2125},
  {"global register variable follows a function definition", 2126},
  {"register used for two global register variables", 2127},
  {"call-clobbered register used for global register variable", 2128},
  {"cannot reload integer constant operand in `asm'", 2129},
  {"impossible register constraint in `asm'", 2130},
  {"`&' constraint used with no register class", 2131},
  {"inconsistent operand constraints in an `asm'", 2132},
  {"frame size too large for reliable stack checking", 2133},
  {"try reducing the number of local variables", 2134},
  {"Can't find a register in class `%s' while reloading `asm'.", 2135},
  {"Unable to find a register to spill in class `%s'.", 2136},
  {"`asm' operand requires impossible reload", 2137},
  {"`asm' operand constraint incompatible with operand size", 2138},
  {"output operand is constant in `asm'", 2139},
  {"RTL check: access of elt %d of `%s' with last elt %d", 2140},
  {"RTL check: expected elt %d type '%c', have '%c' (rtx %s)", 2141},
  {"RTL check: expected elt %d type '%c' or '%c', have '%c' (rtx %s)", 2142},
  {"RTL check: expected code `%s', have `%s'", 2143},
  {"RTL check: expected code `%s' or `%s', have `%s'", 2144},
  {"RTL check: access of elt %d of vector with last elt %d", 2145},
  {"jump to `%s' invalidly jumps into binding contour", 2146},
  {"label `%s' used before containing binding contour", 2147},
  {"`asm' cannot be used in function where memory usage is checked", 2148},
  {"`asm' cannot be used with `-fcheck-memory-usage'", 2149},
  {"unknown register name `%s' in `asm'", 2150},
  {"too many alternatives in `asm'", 2151},
  {"operand constraints for `asm' differ in number of alternatives", 2152},
  {"output operand constraint lacks `='", 2153},
  {"output constraint `%c' for operand %d is not at the beginning", 2154},
  {"output operand constraint %d contains `+'", 2155},
  {"operand constraint contains '+' or '=' at illegal position.", 2156},
  {"`%%' constraint used with last operand", 2157},
  {"matching constraint not valid in output operand", 2158},
  {"invalid punctuation `%c' in constraint", 2159},
  {"output number %d not directly addressable", 2160},
  {"more than %d operands in `asm'", 2161},
  {"hard register `%s' listed as input operand to `asm'", 2162},
  {"input operand constraint contains `%c'", 2163},
  {"matching constraint references invalid operand number", 2164},
  {"asm operand %d probably doesn't match constraints", 2165},
  {"unused variable `%s'", 2166},
  {"enumeration value `%s' not handled in switch", 2167},
  {"case value `%ld' not in enumerated type", 2168},
  {"case value `%ld' not in enumerated type `%s'", 2169},
  {"type size can't be explicitly evaluated", 2170},
  {"variable-size type declared outside of any function", 2171},
  {"size of `%s' is %d bytes", 2172},
  {"size of `%s' is larger than %d bytes", 2173},
  {"packed attribute causes inefficient alignment for `%s'", 2174},
  {"packed attribute is unnecessary for `%s'", 2175},
  {"padding struct to align `%s'", 2176},
  {"padding struct size to alignment boundary", 2177},
  {"packed attribute causes inefficient alignment", 2178},
  {"packed attribute is unnecessary", 2179},
  {"\
\n\
Execution times (seconds)\n", 2180},
  {" TOTAL                 :", 2181},
  {"time in %s: %ld.%06ld (%ld%%)\n", 2182},
  {"collect: reading %s\n", 2183},
  {"collect: recompiling %s\n", 2184},
  {"collect: tweaking %s in %s\n", 2185},
  {"collect: relinking\n", 2186},
  {"ld returned %d exit status", 2187},
  {"Invalid option `%s'", 2188},
  {"\
Internal error: %s.\n\
Please submit a full bug report.\n\
See %s for instructions.", 2189},
  {"`%s' used but never defined", 2190},
  {"`%s' declared `static' but never defined", 2191},
  {"`%s' defined but not used", 2192},
  {"-ffunction-sections not supported for this target.", 2193},
  {"-fdata-sections not supported for this target.", 2194},
  {"-ffunction-sections disabled; it makes profiling impossible.", 2195},
  {"-ffunction-sections may affect debugging on some targets.", 2196},
  {"Errors detected in input file (your bison.simple is out of date)\n", 2197},
  {"invalid register name `%s' for register variable", 2198},
  {"Usage: %s input [switches]\n", 2199},
  {"Switches:\n", 2200},
  {"\
  -ffixed-<register>      Mark <register> as being unavailable to the \
compiler\n", 2201},
  {"\
  -fcall-used-<register>  Mark <register> as being corrupted by function \
calls\n", 2202},
  {"\
  -fcall-saved-<register> Mark <register> as being preserved across \
functions\n", 2203},
  {"\
  -finline-limit=<number> Limits the size of inlined functions to <number>\n", 2204},
  {"\
  -fmessage-length=<number> Limits diagnostics messages lengths to <number> \
characters per line.  0 suppresses line-wrapping\n", 2205},
  {"\
  -fdiagnostics-show-location=[once | every-line] Indicates how often source \
location information should be emitted, as prefix, at the beginning of \
diagnostics when line-wrapping\n", 2206},
  {"  -O[number]              Set optimisation level to [number]\n", 2207},
  {"  -Os                     Optimise for space rather than speed\n", 2208},
  {"\
  -pedantic               Issue warnings needed by strict compliance to ISO \
C\n", 2209},
  {"\
  -pedantic-errors        Like -pedantic except that errors are produced\n", 2210},
  {"  -w                      Suppress warnings\n", 2211},
  {"  -W                      Enable extra warnings\n", 2212},
  {"  -Wunused                Enable unused warnings\n", 2213},
  {"\
  -Wid-clash-<num>        Warn if 2 identifiers have the same first <num> \
chars\n", 2214},
  {"\
  -Wlarger-than-<number>  Warn if an object is larger than <number> bytes\n", 2215},
  {"  -p                      Enable function profiling\n", 2216},
  {"  -a                      Enable block profiling \n", 2217},
  {"  -ax                     Enable jump profiling \n", 2218},
  {"  -o <file>               Place output into <file> \n", 2219},
  {"\
  -G <number>             Put global and static data smaller than <number>\n\
                          bytes into a special section (on some targets)\n", 2220},
  {"  -aux-info <file>        Emit declaration info into <file>.X\n", 2221},
  {"\
  -quiet                  Do not display functions compiled or elapsed time\n", 2222},
  {"  -version                Display the compiler's version\n", 2223},
  {"\
  -d[letters]             Enable dumps from specific passes of the compiler\n", 2224},
  {"\
  -dumpbase <file>        Base name to be used for dumps from specific \
passes\n", 2225},
  {"  -fsched-verbose=<number> Set the verbosity level of the scheduler\n", 2226},
  {"  --help                  Display this information\n", 2227},
  {"\
\n\
Language specific options:\n", 2228},
  {"  %-23.23s [undocumented]\n", 2229},
  {"\
\n\
There are undocumented %s specific options as well.\n", 2230},
  {"\
\n\
 Options for %s:\n", 2231},
  {"\
\n\
Target specific options:\n", 2232},
  {"  -m%-21.21s [undocumented]\n", 2233},
  {"\
\n\
There are undocumented target specific options as well.\n", 2234},
  {"  They exist, but they are not documented.\n", 2235},
  {"unrecognized gcc debugging option: %c", 2236},
  {"unrecognized register name `%s'", 2237},
  {"Unrecognized option `%s'", 2238},
  {"use -gdwarf -g%d for DWARF v1, level %d", 2239},
  {"use -gdwarf-2   for DWARF v2", 2240},
  {"ignoring option `%s' due to invalid debug level specification", 2241},
  {"`%s': unknown or unsupported -g option", 2242},
  {"`%s' ignored, conflicts with `-g%s'", 2243},
  {"`-a' option (basic block profile) not supported", 2244},
  {"`-ax' option (jump profiling) not supported", 2245},
  {"Ignoring command line option '%s'", 2246},
  {"(It is valid for %s but not the selected language)", 2247},
  {"-Wuninitialized is not supported without -O", 2248},
  {"`-ax' and `-a' are conflicting options. `-a' ignored.", 2249},
  {"instruction scheduling not supported on this target machine", 2250},
  {"this target machine does not have delayed branches", 2251},
  {"-f%sleading-underscore not supported on this target machine", 2252},
  {"Data size %ld.\n", 2253},
  {"\
%s%s%s version %s (%s) compiled by GNU C version %s.\n\
%s%s%s version %s (%s) compiled by CC.\n", 2254},
  {"options passed: ", 2255},
  {"options enabled: ", 2256},
  {"macro or #include recursion too deep", 2257},
  {"Usage: %s [switches] input output", 2258},
  {"-traditional is not supported in C++", 2259},
  {"-traditional and -ansi are mutually exclusive", 2260},
  {"Filename missing after -i option", 2261},
  {"Filename missing after -o option", 2262},
  {"Macro name missing after -D option", 2263},
  {"Macro name missing after -U option", 2264},
  {"-pedantic and -traditional are mutually exclusive", 2265},
  {"-trigraphs and -traditional are mutually exclusive", 2266},
  {"Directory name missing after -I option", 2267},
  {"`/*' within comment", 2268},
  {"unterminated #%s conditional", 2269},
  {"not in any file?!", 2270},
  {"`defined' must be followed by ident or (ident)", 2271},
  {"cccp error: invalid special hash type", 2272},
  {"#include expects \"fname\" or <fname>", 2273},
  {"nonexistent file <%.*s> omitted from dependency output", 2274},
  {"invalid macro name", 2275},
  {"invalid macro name `%s'", 2276},
  {"defining `defined' as a macro", 2277},
  {"parameter name starts with a digit in #define", 2278},
  {"badly punctuated parameter list in #define", 2279},
  {"unterminated parameter list in #define", 2280},
  {"\"%.*s\" redefined", 2281},
  {"# operator should be followed by a macro argument name", 2282},
  {"invalid format #line command", 2283},
  {"undefining `defined'", 2284},
  {"undefining `%s'", 2285},
  {"#elif not within a conditional", 2286},
  {"#%s not within a conditional", 2287},
  {"#else or #elif after #else", 2288},
  {"#else not within a conditional", 2289},
  {"unbalanced #endif", 2290},
  {"unterminated string or character constant", 2291},
  {"arguments given to macro `%s'", 2292},
  {"no args to macro `%s'", 2293},
  {"only 1 arg to macro `%s'", 2294},
  {"only %d args to macro `%s'", 2295},
  {"too many (%d) args to macro `%s'", 2296},
  {"\
Internal error in %s, at tradcpp.c:%d\n\
Please submit a full bug report.\n\
See %s for instructions.", 2297},
  {"`%s' and `%s' identical in first %d characters", 2298},
  {"arrays of functions are not meaningful", 2299},
  {"function return type cannot be function", 2300},
  {"invalid initializer for bit string", 2301},
  {"Tree check: expected %s, have %s", 2302},
  {"Tree check: expected class '%c', have '%c' (%s)", 2303},
  {"register name not specified for `%s'", 2304},
  {"invalid register name for `%s'", 2305},
  {"data type of `%s' isn't suitable for a register", 2306},
  {"register specified for `%s' isn't suitable for data type", 2307},
  {"global register variable has initial value", 2308},
  {"volatile register variables don't work as you might wish", 2309},
  {"register name given for non-register variable `%s'", 2310},
  {"size of variable `%s' is too large", 2311},
  {"\
alignment of `%s' is greater than maximum object file alignment. Using %d.", 2312},
  {"requested alignment for %s is greater than implemented alignment of %d.", 2313},
  {"floating point trap outputting a constant", 2314},
  {"initializer for integer value is too complicated", 2315},
  {"initializer for floating value is not a floating constant", 2316},
  {"unknown set constructor type", 2317},
  {"invalid initial value for member `%s'", 2318},
  {"weak declaration of `%s' must be public", 2319},
  {"weak declaration of `%s' must precede definition", 2320},
  {"only weak aliases are supported in this configuration", 2321},
  {"alias definitions not supported in this configuration; ignored", 2322},
  {"Virtual array %s[%lu]: element %lu out of bounds", 2323},
  {"Unknown stab %s: : 0x%x\n", 2324},
  {"may not use both -EB and -EL", 2325},
  {"-mapcs-26 and -mapcs-32 may not be used together", 2326},
  {"-msoft-float and -mhard_float may not be used together", 2327},
  {"-mbig-endian and -mlittle-endian may not be used together", 2328},
  {"Incompatible interworking options", 2329},
  {"-mbsd and -pedantic incompatible", 2330},
  {"-mbsd and -mxopen incompatible", 2331},
  {"-mxopen and -pedantic incompatible", 2332},
  {"A -ifile option requires a -map option", 2333},
  {"`-p' not supported; use `-pg' and gprof(1)", 2334},
  {"-static not valid with -mcoff", 2335},
  {"-shared not valid with -mcoff", 2336},
  {"-symbolic not valid with -mcoff", 2337},
  {"-fpic is not valid with -mcoff", 2338},
  {"-fPIC is not valid with -mcoff", 2339},
  {"-fpic not valid with -mcoff", 2340},
  {"-fPIC not valid with -mcoff", 2341},
  {"-p option not supported: use -pg instead", 2342},
  {"-pipe is not supported.", 2343},
  {"may not use both -mfp64 and -msingle-float", 2344},
  {"may not use both -mfp64 and -m4650", 2345},
  {"-mhard-float not supported.", 2346},
  {"-msingle-float and -msoft-float can not both be specified.", 2347},
  {"-p profiling is no longer supported.  Use -pg instead.", 2348},
  {"profiling not supported with -mg\n", 2349},
  {"GNU C does not support -C without using -E", 2350},
  {"-pg and -fomit-frame-pointer are incompatible", 2351},
  {"-E required when input is from standard input", 2352},
  {"Compilation of header file requested", 2353},
};

int _msg_tbl_length = 2353;