/* RTL simplification functions for GNU compiler. Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "tree.h" #include "tm_p.h" #include "regs.h" #include "hard-reg-set.h" #include "flags.h" #include "real.h" #include "insn-config.h" #include "recog.h" #include "function.h" #include "expr.h" #include "toplev.h" #include "output.h" #include "ggc.h" #include "target.h" /* Simplification and canonicalization of RTL. */ /* Much code operates on (low, high) pairs; the low value is an unsigned wide int, the high value a signed wide int. We occasionally need to sign extend from low to high as if low were a signed wide int. */ #define HWI_SIGN_EXTEND(low) \ ((((HOST_WIDE_INT) low) < 0) ? ((HOST_WIDE_INT) -1) : ((HOST_WIDE_INT) 0)) static rtx neg_const_int (enum machine_mode, rtx); static bool plus_minus_operand_p (rtx); static int simplify_plus_minus_op_data_cmp (const void *, const void *); static rtx simplify_plus_minus (enum rtx_code, enum machine_mode, rtx, rtx, int); static rtx simplify_immed_subreg (enum machine_mode, rtx, enum machine_mode, unsigned int); static rtx simplify_associative_operation (enum rtx_code, enum machine_mode, rtx, rtx); static rtx simplify_relational_operation_1 (enum rtx_code, enum machine_mode, enum machine_mode, rtx, rtx); /* Negate a CONST_INT rtx, truncating (because a conversion from a maximally negative number can overflow). */ static rtx neg_const_int (enum machine_mode mode, rtx i) { return gen_int_mode (- INTVAL (i), mode); } /* Test whether expression, X, is an immediate constant that represents the most significant bit of machine mode MODE. */ bool mode_signbit_p (enum machine_mode mode, rtx x) { unsigned HOST_WIDE_INT val; unsigned int width; if (GET_MODE_CLASS (mode) != MODE_INT) return false; width = GET_MODE_BITSIZE (mode); if (width == 0) return false; if (width <= HOST_BITS_PER_WIDE_INT && GET_CODE (x) == CONST_INT) val = INTVAL (x); else if (width <= 2 * HOST_BITS_PER_WIDE_INT && GET_CODE (x) == CONST_DOUBLE && CONST_DOUBLE_LOW (x) == 0) { val = CONST_DOUBLE_HIGH (x); width -= HOST_BITS_PER_WIDE_INT; } else return false; if (width < HOST_BITS_PER_WIDE_INT) val &= ((unsigned HOST_WIDE_INT) 1 << width) - 1; return val == ((unsigned HOST_WIDE_INT) 1 << (width - 1)); } /* Make a binary operation by properly ordering the operands and seeing if the expression folds. */ rtx simplify_gen_binary (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1) { rtx tem; /* Put complex operands first and constants second if commutative. */ if (GET_RTX_CLASS (code) == RTX_COMM_ARITH && swap_commutative_operands_p (op0, op1)) tem = op0, op0 = op1, op1 = tem; /* If this simplifies, do it. */ tem = simplify_binary_operation (code, mode, op0, op1); if (tem) return tem; /* Handle addition and subtraction specially. Otherwise, just form the operation. */ if (code == PLUS || code == MINUS) { tem = simplify_plus_minus (code, mode, op0, op1, 1); if (tem) return tem; } return gen_rtx_fmt_ee (code, mode, op0, op1); } /* If X is a MEM referencing the constant pool, return the real value. Otherwise return X. */ rtx avoid_constant_pool_reference (rtx x) { rtx c, tmp, addr; enum machine_mode cmode; switch (GET_CODE (x)) { case MEM: break; case FLOAT_EXTEND: /* Handle float extensions of constant pool references. */ tmp = XEXP (x, 0); c = avoid_constant_pool_reference (tmp); if (c != tmp && GET_CODE (c) == CONST_DOUBLE) { REAL_VALUE_TYPE d; REAL_VALUE_FROM_CONST_DOUBLE (d, c); return CONST_DOUBLE_FROM_REAL_VALUE (d, GET_MODE (x)); } return x; default: return x; } addr = XEXP (x, 0); /* Call target hook to avoid the effects of -fpic etc.... */ addr = targetm.delegitimize_address (addr); if (GET_CODE (addr) == LO_SUM) addr = XEXP (addr, 1); if (GET_CODE (addr) != SYMBOL_REF || ! CONSTANT_POOL_ADDRESS_P (addr)) return x; c = get_pool_constant (addr); cmode = get_pool_mode (addr); /* If we're accessing the constant in a different mode than it was originally stored, attempt to fix that up via subreg simplifications. If that fails we have no choice but to return the original memory. */ if (cmode != GET_MODE (x)) { c = simplify_subreg (GET_MODE (x), c, cmode, 0); return c ? c : x; } return c; } /* Make a unary operation by first seeing if it folds and otherwise making the specified operation. */ rtx simplify_gen_unary (enum rtx_code code, enum machine_mode mode, rtx op, enum machine_mode op_mode) { rtx tem; /* If this simplifies, use it. */ if ((tem = simplify_unary_operation (code, mode, op, op_mode)) != 0) return tem; return gen_rtx_fmt_e (code, mode, op); } /* Likewise for ternary operations. */ rtx simplify_gen_ternary (enum rtx_code code, enum machine_mode mode, enum machine_mode op0_mode, rtx op0, rtx op1, rtx op2) { rtx tem; /* If this simplifies, use it. */ if (0 != (tem = simplify_ternary_operation (code, mode, op0_mode, op0, op1, op2))) return tem; return gen_rtx_fmt_eee (code, mode, op0, op1, op2); } /* Likewise, for relational operations. CMP_MODE specifies mode comparison is done in. */ rtx simplify_gen_relational (enum rtx_code code, enum machine_mode mode, enum machine_mode cmp_mode, rtx op0, rtx op1) { rtx tem; if (0 != (tem = simplify_relational_operation (code, mode, cmp_mode, op0, op1))) return tem; return gen_rtx_fmt_ee (code, mode, op0, op1); } /* Replace all occurrences of OLD_RTX in X with NEW_RTX and try to simplify the resulting RTX. Return a new RTX which is as simplified as possible. */ rtx simplify_replace_rtx (rtx x, rtx old_rtx, rtx new_rtx) { enum rtx_code code = GET_CODE (x); enum machine_mode mode = GET_MODE (x); enum machine_mode op_mode; rtx op0, op1, op2; /* If X is OLD_RTX, return NEW_RTX. Otherwise, if this is an expression, try to build a new expression substituting recursively. If we can't do anything, return our input. */ if (x == old_rtx) return new_rtx; switch (GET_RTX_CLASS (code)) { case RTX_UNARY: op0 = XEXP (x, 0); op_mode = GET_MODE (op0); op0 = simplify_replace_rtx (op0, old_rtx, new_rtx); if (op0 == XEXP (x, 0)) return x; return simplify_gen_unary (code, mode, op0, op_mode); case RTX_BIN_ARITH: case RTX_COMM_ARITH: op0 = simplify_replace_rtx (XEXP (x, 0), old_rtx, new_rtx); op1 = simplify_replace_rtx (XEXP (x, 1), old_rtx, new_rtx); if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1)) return x; return simplify_gen_binary (code, mode, op0, op1); case RTX_COMPARE: case RTX_COMM_COMPARE: op0 = XEXP (x, 0); op1 = XEXP (x, 1); op_mode = GET_MODE (op0) != VOIDmode ? GET_MODE (op0) : GET_MODE (op1); op0 = simplify_replace_rtx (op0, old_rtx, new_rtx); op1 = simplify_replace_rtx (op1, old_rtx, new_rtx); if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1)) return x; return simplify_gen_relational (code, mode, op_mode, op0, op1); case RTX_TERNARY: case RTX_BITFIELD_OPS: op0 = XEXP (x, 0); op_mode = GET_MODE (op0); op0 = simplify_replace_rtx (op0, old_rtx, new_rtx); op1 = simplify_replace_rtx (XEXP (x, 1), old_rtx, new_rtx); op2 = simplify_replace_rtx (XEXP (x, 2), old_rtx, new_rtx); if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1) && op2 == XEXP (x, 2)) return x; if (op_mode == VOIDmode) op_mode = GET_MODE (op0); return simplify_gen_ternary (code, mode, op_mode, op0, op1, op2); case RTX_EXTRA: /* The only case we try to handle is a SUBREG. */ if (code == SUBREG) { op0 = simplify_replace_rtx (SUBREG_REG (x), old_rtx, new_rtx); if (op0 == SUBREG_REG (x)) return x; op0 = simplify_gen_subreg (GET_MODE (x), op0, GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x)); return op0 ? op0 : x; } break; case RTX_OBJ: if (code == MEM) { op0 = simplify_replace_rtx (XEXP (x, 0), old_rtx, new_rtx); if (op0 == XEXP (x, 0)) return x; return replace_equiv_address_nv (x, op0); } else if (code == LO_SUM) { op0 = simplify_replace_rtx (XEXP (x, 0), old_rtx, new_rtx); op1 = simplify_replace_rtx (XEXP (x, 1), old_rtx, new_rtx); /* (lo_sum (high x) x) -> x */ if (GET_CODE (op0) == HIGH && rtx_equal_p (XEXP (op0, 0), op1)) return op1; if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1)) return x; return gen_rtx_LO_SUM (mode, op0, op1); } else if (code == REG) { if (rtx_equal_p (x, old_rtx)) return new_rtx; } break; default: break; } return x; } /* Try to simplify a unary operation CODE whose output mode is to be MODE with input operand OP whose mode was originally OP_MODE. Return zero if no simplification can be made. */ rtx simplify_unary_operation (enum rtx_code code, enum machine_mode mode, rtx op, enum machine_mode op_mode) { unsigned int width = GET_MODE_BITSIZE (mode); rtx trueop = avoid_constant_pool_reference (op); if (code == VEC_DUPLICATE) { gcc_assert (VECTOR_MODE_P (mode)); if (GET_MODE (trueop) != VOIDmode) { if (!VECTOR_MODE_P (GET_MODE (trueop))) gcc_assert (GET_MODE_INNER (mode) == GET_MODE (trueop)); else gcc_assert (GET_MODE_INNER (mode) == GET_MODE_INNER (GET_MODE (trueop))); } if (GET_CODE (trueop) == CONST_INT || GET_CODE (trueop) == CONST_DOUBLE || GET_CODE (trueop) == CONST_VECTOR) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); rtvec v = rtvec_alloc (n_elts); unsigned int i; if (GET_CODE (trueop) != CONST_VECTOR) for (i = 0; i < n_elts; i++) RTVEC_ELT (v, i) = trueop; else { enum machine_mode inmode = GET_MODE (trueop); int in_elt_size = GET_MODE_SIZE (GET_MODE_INNER (inmode)); unsigned in_n_elts = (GET_MODE_SIZE (inmode) / in_elt_size); gcc_assert (in_n_elts < n_elts); gcc_assert ((n_elts % in_n_elts) == 0); for (i = 0; i < n_elts; i++) RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop, i % in_n_elts); } return gen_rtx_CONST_VECTOR (mode, v); } } else if (GET_CODE (op) == CONST) return simplify_unary_operation (code, mode, XEXP (op, 0), op_mode); if (VECTOR_MODE_P (mode) && GET_CODE (trueop) == CONST_VECTOR) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); enum machine_mode opmode = GET_MODE (trueop); int op_elt_size = GET_MODE_SIZE (GET_MODE_INNER (opmode)); unsigned op_n_elts = (GET_MODE_SIZE (opmode) / op_elt_size); rtvec v = rtvec_alloc (n_elts); unsigned int i; gcc_assert (op_n_elts == n_elts); for (i = 0; i < n_elts; i++) { rtx x = simplify_unary_operation (code, GET_MODE_INNER (mode), CONST_VECTOR_ELT (trueop, i), GET_MODE_INNER (opmode)); if (!x) return 0; RTVEC_ELT (v, i) = x; } return gen_rtx_CONST_VECTOR (mode, v); } /* The order of these tests is critical so that, for example, we don't check the wrong mode (input vs. output) for a conversion operation, such as FIX. At some point, this should be simplified. */ if (code == FLOAT && GET_MODE (trueop) == VOIDmode && (GET_CODE (trueop) == CONST_DOUBLE || GET_CODE (trueop) == CONST_INT)) { HOST_WIDE_INT hv, lv; REAL_VALUE_TYPE d; if (GET_CODE (trueop) == CONST_INT) lv = INTVAL (trueop), hv = HWI_SIGN_EXTEND (lv); else lv = CONST_DOUBLE_LOW (trueop), hv = CONST_DOUBLE_HIGH (trueop); REAL_VALUE_FROM_INT (d, lv, hv, mode); d = real_value_truncate (mode, d); return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); } else if (code == UNSIGNED_FLOAT && GET_MODE (trueop) == VOIDmode && (GET_CODE (trueop) == CONST_DOUBLE || GET_CODE (trueop) == CONST_INT)) { HOST_WIDE_INT hv, lv; REAL_VALUE_TYPE d; if (GET_CODE (trueop) == CONST_INT) lv = INTVAL (trueop), hv = HWI_SIGN_EXTEND (lv); else lv = CONST_DOUBLE_LOW (trueop), hv = CONST_DOUBLE_HIGH (trueop); if (op_mode == VOIDmode) { /* We don't know how to interpret negative-looking numbers in this case, so don't try to fold those. */ if (hv < 0) return 0; } else if (GET_MODE_BITSIZE (op_mode) >= HOST_BITS_PER_WIDE_INT * 2) ; else hv = 0, lv &= GET_MODE_MASK (op_mode); REAL_VALUE_FROM_UNSIGNED_INT (d, lv, hv, mode); d = real_value_truncate (mode, d); return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); } if (GET_CODE (trueop) == CONST_INT && width <= HOST_BITS_PER_WIDE_INT && width > 0) { HOST_WIDE_INT arg0 = INTVAL (trueop); HOST_WIDE_INT val; switch (code) { case NOT: val = ~ arg0; break; case NEG: val = - arg0; break; case ABS: val = (arg0 >= 0 ? arg0 : - arg0); break; case FFS: /* Don't use ffs here. Instead, get low order bit and then its number. If arg0 is zero, this will return 0, as desired. */ arg0 &= GET_MODE_MASK (mode); val = exact_log2 (arg0 & (- arg0)) + 1; break; case CLZ: arg0 &= GET_MODE_MASK (mode); if (arg0 == 0 && CLZ_DEFINED_VALUE_AT_ZERO (mode, val)) ; else val = GET_MODE_BITSIZE (mode) - floor_log2 (arg0) - 1; break; case CTZ: arg0 &= GET_MODE_MASK (mode); if (arg0 == 0) { /* Even if the value at zero is undefined, we have to come up with some replacement. Seems good enough. */ if (! CTZ_DEFINED_VALUE_AT_ZERO (mode, val)) val = GET_MODE_BITSIZE (mode); } else val = exact_log2 (arg0 & -arg0); break; case POPCOUNT: arg0 &= GET_MODE_MASK (mode); val = 0; while (arg0) val++, arg0 &= arg0 - 1; break; case PARITY: arg0 &= GET_MODE_MASK (mode); val = 0; while (arg0) val++, arg0 &= arg0 - 1; val &= 1; break; case TRUNCATE: val = arg0; break; case ZERO_EXTEND: /* When zero-extending a CONST_INT, we need to know its original mode. */ gcc_assert (op_mode != VOIDmode); if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT) { /* If we were really extending the mode, we would have to distinguish between zero-extension and sign-extension. */ gcc_assert (width == GET_MODE_BITSIZE (op_mode)); val = arg0; } else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT) val = arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode)); else return 0; break; case SIGN_EXTEND: if (op_mode == VOIDmode) op_mode = mode; if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT) { /* If we were really extending the mode, we would have to distinguish between zero-extension and sign-extension. */ gcc_assert (width == GET_MODE_BITSIZE (op_mode)); val = arg0; } else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT) { val = arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode)); if (val & ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (op_mode) - 1))) val -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode); } else return 0; break; case SQRT: case FLOAT_EXTEND: case FLOAT_TRUNCATE: case SS_TRUNCATE: case US_TRUNCATE: return 0; default: gcc_unreachable (); } val = trunc_int_for_mode (val, mode); return GEN_INT (val); } /* We can do some operations on integer CONST_DOUBLEs. Also allow for a DImode operation on a CONST_INT. */ else if (GET_MODE (trueop) == VOIDmode && width <= HOST_BITS_PER_WIDE_INT * 2 && (GET_CODE (trueop) == CONST_DOUBLE || GET_CODE (trueop) == CONST_INT)) { unsigned HOST_WIDE_INT l1, lv; HOST_WIDE_INT h1, hv; if (GET_CODE (trueop) == CONST_DOUBLE) l1 = CONST_DOUBLE_LOW (trueop), h1 = CONST_DOUBLE_HIGH (trueop); else l1 = INTVAL (trueop), h1 = HWI_SIGN_EXTEND (l1); switch (code) { case NOT: lv = ~ l1; hv = ~ h1; break; case NEG: neg_double (l1, h1, &lv, &hv); break; case ABS: if (h1 < 0) neg_double (l1, h1, &lv, &hv); else lv = l1, hv = h1; break; case FFS: hv = 0; if (l1 == 0) { if (h1 == 0) lv = 0; else lv = HOST_BITS_PER_WIDE_INT + exact_log2 (h1 & -h1) + 1; } else lv = exact_log2 (l1 & -l1) + 1; break; case CLZ: hv = 0; if (h1 != 0) lv = GET_MODE_BITSIZE (mode) - floor_log2 (h1) - 1 - HOST_BITS_PER_WIDE_INT; else if (l1 != 0) lv = GET_MODE_BITSIZE (mode) - floor_log2 (l1) - 1; else if (! CLZ_DEFINED_VALUE_AT_ZERO (mode, lv)) lv = GET_MODE_BITSIZE (mode); break; case CTZ: hv = 0; if (l1 != 0) lv = exact_log2 (l1 & -l1); else if (h1 != 0) lv = HOST_BITS_PER_WIDE_INT + exact_log2 (h1 & -h1); else if (! CTZ_DEFINED_VALUE_AT_ZERO (mode, lv)) lv = GET_MODE_BITSIZE (mode); break; case POPCOUNT: hv = 0; lv = 0; while (l1) lv++, l1 &= l1 - 1; while (h1) lv++, h1 &= h1 - 1; break; case PARITY: hv = 0; lv = 0; while (l1) lv++, l1 &= l1 - 1; while (h1) lv++, h1 &= h1 - 1; lv &= 1; break; case TRUNCATE: /* This is just a change-of-mode, so do nothing. */ lv = l1, hv = h1; break; case ZERO_EXTEND: gcc_assert (op_mode != VOIDmode); if (GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT) return 0; hv = 0; lv = l1 & GET_MODE_MASK (op_mode); break; case SIGN_EXTEND: if (op_mode == VOIDmode || GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT) return 0; else { lv = l1 & GET_MODE_MASK (op_mode); if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT && (lv & ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (op_mode) - 1))) != 0) lv -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode); hv = HWI_SIGN_EXTEND (lv); } break; case SQRT: return 0; default: return 0; } return immed_double_const (lv, hv, mode); } else if (GET_CODE (trueop) == CONST_DOUBLE && GET_MODE_CLASS (mode) == MODE_FLOAT) { REAL_VALUE_TYPE d, t; REAL_VALUE_FROM_CONST_DOUBLE (d, trueop); switch (code) { case SQRT: if (HONOR_SNANS (mode) && real_isnan (&d)) return 0; real_sqrt (&t, mode, &d); d = t; break; case ABS: d = REAL_VALUE_ABS (d); break; case NEG: d = REAL_VALUE_NEGATE (d); break; case FLOAT_TRUNCATE: d = real_value_truncate (mode, d); break; case FLOAT_EXTEND: /* All this does is change the mode. */ break; case FIX: real_arithmetic (&d, FIX_TRUNC_EXPR, &d, NULL); break; case NOT: { long tmp[4]; int i; real_to_target (tmp, &d, GET_MODE (trueop)); for (i = 0; i < 4; i++) tmp[i] = ~tmp[i]; real_from_target (&d, tmp, mode); } default: gcc_unreachable (); } return CONST_DOUBLE_FROM_REAL_VALUE (d, mode); } else if (GET_CODE (trueop) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (trueop)) == MODE_FLOAT && GET_MODE_CLASS (mode) == MODE_INT && width <= 2*HOST_BITS_PER_WIDE_INT && width > 0) { /* Although the overflow semantics of RTL's FIX and UNSIGNED_FIX operators are intentionally left unspecified (to ease implementation by target backends), for consistency, this routine implements the same semantics for constant folding as used by the middle-end. */ HOST_WIDE_INT xh, xl, th, tl; REAL_VALUE_TYPE x, t; REAL_VALUE_FROM_CONST_DOUBLE (x, trueop); switch (code) { case FIX: if (REAL_VALUE_ISNAN (x)) return const0_rtx; /* Test against the signed upper bound. */ if (width > HOST_BITS_PER_WIDE_INT) { th = ((unsigned HOST_WIDE_INT) 1 << (width - HOST_BITS_PER_WIDE_INT - 1)) - 1; tl = -1; } else { th = 0; tl = ((unsigned HOST_WIDE_INT) 1 << (width - 1)) - 1; } real_from_integer (&t, VOIDmode, tl, th, 0); if (REAL_VALUES_LESS (t, x)) { xh = th; xl = tl; break; } /* Test against the signed lower bound. */ if (width > HOST_BITS_PER_WIDE_INT) { th = (HOST_WIDE_INT) -1 << (width - HOST_BITS_PER_WIDE_INT - 1); tl = 0; } else { th = -1; tl = (HOST_WIDE_INT) -1 << (width - 1); } real_from_integer (&t, VOIDmode, tl, th, 0); if (REAL_VALUES_LESS (x, t)) { xh = th; xl = tl; break; } REAL_VALUE_TO_INT (&xl, &xh, x); break; case UNSIGNED_FIX: if (REAL_VALUE_ISNAN (x) || REAL_VALUE_NEGATIVE (x)) return const0_rtx; /* Test against the unsigned upper bound. */ if (width == 2*HOST_BITS_PER_WIDE_INT) { th = -1; tl = -1; } else if (width >= HOST_BITS_PER_WIDE_INT) { th = ((unsigned HOST_WIDE_INT) 1 << (width - HOST_BITS_PER_WIDE_INT)) - 1; tl = -1; } else { th = 0; tl = ((unsigned HOST_WIDE_INT) 1 << width) - 1; } real_from_integer (&t, VOIDmode, tl, th, 1); if (REAL_VALUES_LESS (t, x)) { xh = th; xl = tl; break; } REAL_VALUE_TO_INT (&xl, &xh, x); break; default: gcc_unreachable (); } return immed_double_const (xl, xh, mode); } /* This was formerly used only for non-IEEE float. eggert@twinsun.com says it is safe for IEEE also. */ else { enum rtx_code reversed; rtx temp; /* There are some simplifications we can do even if the operands aren't constant. */ switch (code) { case NOT: /* (not (not X)) == X. */ if (GET_CODE (op) == NOT) return XEXP (op, 0); /* (not (eq X Y)) == (ne X Y), etc. */ if (COMPARISON_P (op) && (mode == BImode || STORE_FLAG_VALUE == -1) && ((reversed = reversed_comparison_code (op, NULL_RTX)) != UNKNOWN)) return simplify_gen_relational (reversed, mode, VOIDmode, XEXP (op, 0), XEXP (op, 1)); /* (not (plus X -1)) can become (neg X). */ if (GET_CODE (op) == PLUS && XEXP (op, 1) == constm1_rtx) return simplify_gen_unary (NEG, mode, XEXP (op, 0), mode); /* Similarly, (not (neg X)) is (plus X -1). */ if (GET_CODE (op) == NEG) return plus_constant (XEXP (op, 0), -1); /* (not (xor X C)) for C constant is (xor X D) with D = ~C. */ if (GET_CODE (op) == XOR && GET_CODE (XEXP (op, 1)) == CONST_INT && (temp = simplify_unary_operation (NOT, mode, XEXP (op, 1), mode)) != 0) return simplify_gen_binary (XOR, mode, XEXP (op, 0), temp); /* (not (plus X C)) for signbit C is (xor X D) with D = ~C. */ if (GET_CODE (op) == PLUS && GET_CODE (XEXP (op, 1)) == CONST_INT && mode_signbit_p (mode, XEXP (op, 1)) && (temp = simplify_unary_operation (NOT, mode, XEXP (op, 1), mode)) != 0) return simplify_gen_binary (XOR, mode, XEXP (op, 0), temp); /* (not (ashift 1 X)) is (rotate ~1 X). We used to do this for operands other than 1, but that is not valid. We could do a similar simplification for (not (lshiftrt C X)) where C is just the sign bit, but this doesn't seem common enough to bother with. */ if (GET_CODE (op) == ASHIFT && XEXP (op, 0) == const1_rtx) { temp = simplify_gen_unary (NOT, mode, const1_rtx, mode); return simplify_gen_binary (ROTATE, mode, temp, XEXP (op, 1)); } /* If STORE_FLAG_VALUE is -1, (not (comparison X Y)) can be done by reversing the comparison code if valid. */ if (STORE_FLAG_VALUE == -1 && COMPARISON_P (op) && (reversed = reversed_comparison_code (op, NULL_RTX)) != UNKNOWN) return simplify_gen_relational (reversed, mode, VOIDmode, XEXP (op, 0), XEXP (op, 1)); /* (not (ashiftrt foo C)) where C is the number of bits in FOO minus 1 is (ge foo (const_int 0)) if STORE_FLAG_VALUE is -1, so we can perform the above simplification. */ if (STORE_FLAG_VALUE == -1 && GET_CODE (op) == ASHIFTRT && GET_CODE (XEXP (op, 1)) == CONST_INT && INTVAL (XEXP (op, 1)) == GET_MODE_BITSIZE (mode) - 1) return simplify_gen_relational (GE, mode, VOIDmode, XEXP (op, 0), const0_rtx); break; case NEG: /* (neg (neg X)) == X. */ if (GET_CODE (op) == NEG) return XEXP (op, 0); /* (neg (plus X 1)) can become (not X). */ if (GET_CODE (op) == PLUS && XEXP (op, 1) == const1_rtx) return simplify_gen_unary (NOT, mode, XEXP (op, 0), mode); /* Similarly, (neg (not X)) is (plus X 1). */ if (GET_CODE (op) == NOT) return plus_constant (XEXP (op, 0), 1); /* (neg (minus X Y)) can become (minus Y X). This transformation isn't safe for modes with signed zeros, since if X and Y are both +0, (minus Y X) is the same as (minus X Y). If the rounding mode is towards +infinity (or -infinity) then the two expressions will be rounded differently. */ if (GET_CODE (op) == MINUS && !HONOR_SIGNED_ZEROS (mode) && !HONOR_SIGN_DEPENDENT_ROUNDING (mode)) return simplify_gen_binary (MINUS, mode, XEXP (op, 1), XEXP (op, 0)); if (GET_CODE (op) == PLUS && !HONOR_SIGNED_ZEROS (mode) && !HONOR_SIGN_DEPENDENT_ROUNDING (mode)) { /* (neg (plus A C)) is simplified to (minus -C A). */ if (GET_CODE (XEXP (op, 1)) == CONST_INT || GET_CODE (XEXP (op, 1)) == CONST_DOUBLE) { temp = simplify_unary_operation (NEG, mode, XEXP (op, 1), mode); if (temp) return simplify_gen_binary (MINUS, mode, temp, XEXP (op, 0)); } /* (neg (plus A B)) is canonicalized to (minus (neg A) B). */ temp = simplify_gen_unary (NEG, mode, XEXP (op, 0), mode); return simplify_gen_binary (MINUS, mode, temp, XEXP (op, 1)); } /* (neg (mult A B)) becomes (mult (neg A) B). This works even for floating-point values. */ if (GET_CODE (op) == MULT && !HONOR_SIGN_DEPENDENT_ROUNDING (mode)) { temp = simplify_gen_unary (NEG, mode, XEXP (op, 0), mode); return simplify_gen_binary (MULT, mode, temp, XEXP (op, 1)); } /* NEG commutes with ASHIFT since it is multiplication. Only do this if we can then eliminate the NEG (e.g., if the operand is a constant). */ if (GET_CODE (op) == ASHIFT) { temp = simplify_unary_operation (NEG, mode, XEXP (op, 0), mode); if (temp) return simplify_gen_binary (ASHIFT, mode, temp, XEXP (op, 1)); } /* (neg (ashiftrt X C)) can be replaced by (lshiftrt X C) when C is equal to the width of MODE minus 1. */ if (GET_CODE (op) == ASHIFTRT && GET_CODE (XEXP (op, 1)) == CONST_INT && INTVAL (XEXP (op, 1)) == GET_MODE_BITSIZE (mode) - 1) return simplify_gen_binary (LSHIFTRT, mode, XEXP (op, 0), XEXP (op, 1)); /* (neg (lshiftrt X C)) can be replaced by (ashiftrt X C) when C is equal to the width of MODE minus 1. */ if (GET_CODE (op) == LSHIFTRT && GET_CODE (XEXP (op, 1)) == CONST_INT && INTVAL (XEXP (op, 1)) == GET_MODE_BITSIZE (mode) - 1) return simplify_gen_binary (ASHIFTRT, mode, XEXP (op, 0), XEXP (op, 1)); break; case SIGN_EXTEND: /* (sign_extend (truncate (minus (label_ref L1) (label_ref L2)))) becomes just the MINUS if its mode is MODE. This allows folding switch statements on machines using casesi (such as the VAX). */ if (GET_CODE (op) == TRUNCATE && GET_MODE (XEXP (op, 0)) == mode && GET_CODE (XEXP (op, 0)) == MINUS && GET_CODE (XEXP (XEXP (op, 0), 0)) == LABEL_REF && GET_CODE (XEXP (XEXP (op, 0), 1)) == LABEL_REF) return XEXP (op, 0); /* Check for a sign extension of a subreg of a promoted variable, where the promotion is sign-extended, and the target mode is the same as the variable's promotion. */ if (GET_CODE (op) == SUBREG && SUBREG_PROMOTED_VAR_P (op) && ! SUBREG_PROMOTED_UNSIGNED_P (op) && GET_MODE (XEXP (op, 0)) == mode) return XEXP (op, 0); #if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend) if (! POINTERS_EXTEND_UNSIGNED && mode == Pmode && GET_MODE (op) == ptr_mode && (CONSTANT_P (op) || (GET_CODE (op) == SUBREG && REG_P (SUBREG_REG (op)) && REG_POINTER (SUBREG_REG (op)) && GET_MODE (SUBREG_REG (op)) == Pmode))) return convert_memory_address (Pmode, op); #endif break; case ZERO_EXTEND: /* Check for a zero extension of a subreg of a promoted variable, where the promotion is zero-extended, and the target mode is the same as the variable's promotion. */ if (GET_CODE (op) == SUBREG && SUBREG_PROMOTED_VAR_P (op) && SUBREG_PROMOTED_UNSIGNED_P (op) && GET_MODE (XEXP (op, 0)) == mode) return XEXP (op, 0); #if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend) if (POINTERS_EXTEND_UNSIGNED > 0 && mode == Pmode && GET_MODE (op) == ptr_mode && (CONSTANT_P (op) || (GET_CODE (op) == SUBREG && REG_P (SUBREG_REG (op)) && REG_POINTER (SUBREG_REG (op)) && GET_MODE (SUBREG_REG (op)) == Pmode))) return convert_memory_address (Pmode, op); #endif break; default: break; } return 0; } } /* Subroutine of simplify_binary_operation to simplify a commutative, associative binary operation CODE with result mode MODE, operating on OP0 and OP1. CODE is currently one of PLUS, MULT, AND, IOR, XOR, SMIN, SMAX, UMIN or UMAX. Return zero if no simplification or canonicalization is possible. */ static rtx simplify_associative_operation (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1) { rtx tem; /* Linearize the operator to the left. */ if (GET_CODE (op1) == code) { /* "(a op b) op (c op d)" becomes "((a op b) op c) op d)". */ if (GET_CODE (op0) == code) { tem = simplify_gen_binary (code, mode, op0, XEXP (op1, 0)); return simplify_gen_binary (code, mode, tem, XEXP (op1, 1)); } /* "a op (b op c)" becomes "(b op c) op a". */ if (! swap_commutative_operands_p (op1, op0)) return simplify_gen_binary (code, mode, op1, op0); tem = op0; op0 = op1; op1 = tem; } if (GET_CODE (op0) == code) { /* Canonicalize "(x op c) op y" as "(x op y) op c". */ if (swap_commutative_operands_p (XEXP (op0, 1), op1)) { tem = simplify_gen_binary (code, mode, XEXP (op0, 0), op1); return simplify_gen_binary (code, mode, tem, XEXP (op0, 1)); } /* Attempt to simplify "(a op b) op c" as "a op (b op c)". */ tem = swap_commutative_operands_p (XEXP (op0, 1), op1) ? simplify_binary_operation (code, mode, op1, XEXP (op0, 1)) : simplify_binary_operation (code, mode, XEXP (op0, 1), op1); if (tem != 0) return simplify_gen_binary (code, mode, XEXP (op0, 0), tem); /* Attempt to simplify "(a op b) op c" as "(a op c) op b". */ tem = swap_commutative_operands_p (XEXP (op0, 0), op1) ? simplify_binary_operation (code, mode, op1, XEXP (op0, 0)) : simplify_binary_operation (code, mode, XEXP (op0, 0), op1); if (tem != 0) return simplify_gen_binary (code, mode, tem, XEXP (op0, 1)); } return 0; } /* Simplify a binary operation CODE with result mode MODE, operating on OP0 and OP1. Return 0 if no simplification is possible. Don't use this for relational operations such as EQ or LT. Use simplify_relational_operation instead. */ rtx simplify_binary_operation (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1) { HOST_WIDE_INT arg0, arg1, arg0s, arg1s; HOST_WIDE_INT val; unsigned int width = GET_MODE_BITSIZE (mode); rtx trueop0, trueop1; rtx tem; /* Relational operations don't work here. We must know the mode of the operands in order to do the comparison correctly. Assuming a full word can give incorrect results. Consider comparing 128 with -128 in QImode. */ gcc_assert (GET_RTX_CLASS (code) != RTX_COMPARE); gcc_assert (GET_RTX_CLASS (code) != RTX_COMM_COMPARE); /* Make sure the constant is second. */ if (GET_RTX_CLASS (code) == RTX_COMM_ARITH && swap_commutative_operands_p (op0, op1)) { tem = op0, op0 = op1, op1 = tem; } trueop0 = avoid_constant_pool_reference (op0); trueop1 = avoid_constant_pool_reference (op1); if (VECTOR_MODE_P (mode) && code != VEC_CONCAT && GET_CODE (trueop0) == CONST_VECTOR && GET_CODE (trueop1) == CONST_VECTOR) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); enum machine_mode op0mode = GET_MODE (trueop0); int op0_elt_size = GET_MODE_SIZE (GET_MODE_INNER (op0mode)); unsigned op0_n_elts = (GET_MODE_SIZE (op0mode) / op0_elt_size); enum machine_mode op1mode = GET_MODE (trueop1); int op1_elt_size = GET_MODE_SIZE (GET_MODE_INNER (op1mode)); unsigned op1_n_elts = (GET_MODE_SIZE (op1mode) / op1_elt_size); rtvec v = rtvec_alloc (n_elts); unsigned int i; gcc_assert (op0_n_elts == n_elts); gcc_assert (op1_n_elts == n_elts); for (i = 0; i < n_elts; i++) { rtx x = simplify_binary_operation (code, GET_MODE_INNER (mode), CONST_VECTOR_ELT (trueop0, i), CONST_VECTOR_ELT (trueop1, i)); if (!x) return 0; RTVEC_ELT (v, i) = x; } return gen_rtx_CONST_VECTOR (mode, v); } if (GET_MODE_CLASS (mode) == MODE_FLOAT && GET_CODE (trueop0) == CONST_DOUBLE && GET_CODE (trueop1) == CONST_DOUBLE && mode == GET_MODE (op0) && mode == GET_MODE (op1)) { if (code == AND || code == IOR || code == XOR) { long tmp0[4]; long tmp1[4]; REAL_VALUE_TYPE r; int i; real_to_target (tmp0, CONST_DOUBLE_REAL_VALUE (op0), GET_MODE (op0)); real_to_target (tmp1, CONST_DOUBLE_REAL_VALUE (op1), GET_MODE (op1)); for (i = 0; i < 4; i++) { switch (code) { case AND: tmp0[i] &= tmp1[i]; break; case IOR: tmp0[i] |= tmp1[i]; break; case XOR: tmp0[i] ^= tmp1[i]; break; default: gcc_unreachable (); } } real_from_target (&r, tmp0, mode); return CONST_DOUBLE_FROM_REAL_VALUE (r, mode); } else { REAL_VALUE_TYPE f0, f1, value; REAL_VALUE_FROM_CONST_DOUBLE (f0, trueop0); REAL_VALUE_FROM_CONST_DOUBLE (f1, trueop1); f0 = real_value_truncate (mode, f0); f1 = real_value_truncate (mode, f1); if (HONOR_SNANS (mode) && (REAL_VALUE_ISNAN (f0) || REAL_VALUE_ISNAN (f1))) return 0; if (code == DIV && REAL_VALUES_EQUAL (f1, dconst0) && (flag_trapping_math || ! MODE_HAS_INFINITIES (mode))) return 0; if (MODE_HAS_INFINITIES (mode) && HONOR_NANS (mode) && flag_trapping_math && REAL_VALUE_ISINF (f0) && REAL_VALUE_ISINF (f1)) { int s0 = REAL_VALUE_NEGATIVE (f0); int s1 = REAL_VALUE_NEGATIVE (f1); switch (code) { case PLUS: /* Inf + -Inf = NaN plus exception. */ if (s0 != s1) return 0; break; case MINUS: /* Inf - Inf = NaN plus exception. */ if (s0 == s1) return 0; break; case DIV: /* Inf / Inf = NaN plus exception. */ return 0; default: break; } } if (code == MULT && MODE_HAS_INFINITIES (mode) && HONOR_NANS (mode) && flag_trapping_math && ((REAL_VALUE_ISINF (f0) && REAL_VALUES_EQUAL (f1, dconst0)) || (REAL_VALUE_ISINF (f1) && REAL_VALUES_EQUAL (f0, dconst0)))) /* Inf * 0 = NaN plus exception. */ return 0; REAL_ARITHMETIC (value, rtx_to_tree_code (code), f0, f1); value = real_value_truncate (mode, value); return CONST_DOUBLE_FROM_REAL_VALUE (value, mode); } } /* We can fold some multi-word operations. */ if (GET_MODE_CLASS (mode) == MODE_INT && width == HOST_BITS_PER_WIDE_INT * 2 && (GET_CODE (trueop0) == CONST_DOUBLE || GET_CODE (trueop0) == CONST_INT) && (GET_CODE (trueop1) == CONST_DOUBLE || GET_CODE (trueop1) == CONST_INT)) { unsigned HOST_WIDE_INT l1, l2, lv, lt; HOST_WIDE_INT h1, h2, hv, ht; if (GET_CODE (trueop0) == CONST_DOUBLE) l1 = CONST_DOUBLE_LOW (trueop0), h1 = CONST_DOUBLE_HIGH (trueop0); else l1 = INTVAL (trueop0), h1 = HWI_SIGN_EXTEND (l1); if (GET_CODE (trueop1) == CONST_DOUBLE) l2 = CONST_DOUBLE_LOW (trueop1), h2 = CONST_DOUBLE_HIGH (trueop1); else l2 = INTVAL (trueop1), h2 = HWI_SIGN_EXTEND (l2); switch (code) { case MINUS: /* A - B == A + (-B). */ neg_double (l2, h2, &lv, &hv); l2 = lv, h2 = hv; /* Fall through.... */ case PLUS: add_double (l1, h1, l2, h2, &lv, &hv); break; case MULT: mul_double (l1, h1, l2, h2, &lv, &hv); break; case DIV: if (div_and_round_double (TRUNC_DIV_EXPR, 0, l1, h1, l2, h2, &lv, &hv, <, &ht)) return 0; break; case MOD: if (div_and_round_double (TRUNC_DIV_EXPR, 0, l1, h1, l2, h2, <, &ht, &lv, &hv)) return 0; break; case UDIV: if (div_and_round_double (TRUNC_DIV_EXPR, 1, l1, h1, l2, h2, &lv, &hv, <, &ht)) return 0; break; case UMOD: if (div_and_round_double (TRUNC_DIV_EXPR, 1, l1, h1, l2, h2, <, &ht, &lv, &hv)) return 0; break; case AND: lv = l1 & l2, hv = h1 & h2; break; case IOR: lv = l1 | l2, hv = h1 | h2; break; case XOR: lv = l1 ^ l2, hv = h1 ^ h2; break; case SMIN: if (h1 < h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 < (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case SMAX: if (h1 > h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 > (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case UMIN: if ((unsigned HOST_WIDE_INT) h1 < (unsigned HOST_WIDE_INT) h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 < (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case UMAX: if ((unsigned HOST_WIDE_INT) h1 > (unsigned HOST_WIDE_INT) h2 || (h1 == h2 && ((unsigned HOST_WIDE_INT) l1 > (unsigned HOST_WIDE_INT) l2))) lv = l1, hv = h1; else lv = l2, hv = h2; break; case LSHIFTRT: case ASHIFTRT: case ASHIFT: case ROTATE: case ROTATERT: if (SHIFT_COUNT_TRUNCATED) l2 &= (GET_MODE_BITSIZE (mode) - 1), h2 = 0; if (h2 != 0 || l2 >= GET_MODE_BITSIZE (mode)) return 0; if (code == LSHIFTRT || code == ASHIFTRT) rshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, code == ASHIFTRT); else if (code == ASHIFT) lshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, 1); else if (code == ROTATE) lrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); else /* code == ROTATERT */ rrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv); break; default: return 0; } return immed_double_const (lv, hv, mode); } if (GET_CODE (op0) != CONST_INT || GET_CODE (op1) != CONST_INT || width > HOST_BITS_PER_WIDE_INT || width == 0) { /* Even if we can't compute a constant result, there are some cases worth simplifying. */ switch (code) { case PLUS: /* Maybe simplify x + 0 to x. The two expressions are equivalent when x is NaN, infinite, or finite and nonzero. They aren't when x is -0 and the rounding mode is not towards -infinity, since (-0) + 0 is then 0. */ if (!HONOR_SIGNED_ZEROS (mode) && trueop1 == CONST0_RTX (mode)) return op0; /* ((-a) + b) -> (b - a) and similarly for (a + (-b)). These transformations are safe even for IEEE. */ if (GET_CODE (op0) == NEG) return simplify_gen_binary (MINUS, mode, op1, XEXP (op0, 0)); else if (GET_CODE (op1) == NEG) return simplify_gen_binary (MINUS, mode, op0, XEXP (op1, 0)); /* (~a) + 1 -> -a */ if (INTEGRAL_MODE_P (mode) && GET_CODE (op0) == NOT && trueop1 == const1_rtx) return simplify_gen_unary (NEG, mode, XEXP (op0, 0), mode); /* Handle both-operands-constant cases. We can only add CONST_INTs to constants since the sum of relocatable symbols can't be handled by most assemblers. Don't add CONST_INT to CONST_INT since overflow won't be computed properly if wider than HOST_BITS_PER_WIDE_INT. */ if (CONSTANT_P (op0) && GET_MODE (op0) != VOIDmode && GET_CODE (op1) == CONST_INT) return plus_constant (op0, INTVAL (op1)); else if (CONSTANT_P (op1) && GET_MODE (op1) != VOIDmode && GET_CODE (op0) == CONST_INT) return plus_constant (op1, INTVAL (op0)); /* See if this is something like X * C - X or vice versa or if the multiplication is written as a shift. If so, we can distribute and make a new multiply, shift, or maybe just have X (if C is 2 in the example above). But don't make something more expensive than we had before. */ if (! FLOAT_MODE_P (mode)) { HOST_WIDE_INT coeff0 = 1, coeff1 = 1; rtx lhs = op0, rhs = op1; if (GET_CODE (lhs) == NEG) coeff0 = -1, lhs = XEXP (lhs, 0); else if (GET_CODE (lhs) == MULT && GET_CODE (XEXP (lhs, 1)) == CONST_INT) { coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0); } else if (GET_CODE (lhs) == ASHIFT && GET_CODE (XEXP (lhs, 1)) == CONST_INT && INTVAL (XEXP (lhs, 1)) >= 0 && INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1)); lhs = XEXP (lhs, 0); } if (GET_CODE (rhs) == NEG) coeff1 = -1, rhs = XEXP (rhs, 0); else if (GET_CODE (rhs) == MULT && GET_CODE (XEXP (rhs, 1)) == CONST_INT) { coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0); } else if (GET_CODE (rhs) == ASHIFT && GET_CODE (XEXP (rhs, 1)) == CONST_INT && INTVAL (XEXP (rhs, 1)) >= 0 && INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1)); rhs = XEXP (rhs, 0); } if (rtx_equal_p (lhs, rhs)) { rtx orig = gen_rtx_PLUS (mode, op0, op1); tem = simplify_gen_binary (MULT, mode, lhs, GEN_INT (coeff0 + coeff1)); return rtx_cost (tem, SET) <= rtx_cost (orig, SET) ? tem : 0; } } /* (plus (xor X C1) C2) is (xor X (C1^C2)) if C2 is signbit. */ if ((GET_CODE (op1) == CONST_INT || GET_CODE (op1) == CONST_DOUBLE) && GET_CODE (op0) == XOR && (GET_CODE (XEXP (op0, 1)) == CONST_INT || GET_CODE (XEXP (op0, 1)) == CONST_DOUBLE) && mode_signbit_p (mode, op1)) return simplify_gen_binary (XOR, mode, XEXP (op0, 0), simplify_gen_binary (XOR, mode, op1, XEXP (op0, 1))); /* If one of the operands is a PLUS or a MINUS, see if we can simplify this by the associative law. Don't use the associative law for floating point. The inaccuracy makes it nonassociative, and subtle programs can break if operations are associated. */ if (INTEGRAL_MODE_P (mode) && (plus_minus_operand_p (op0) || plus_minus_operand_p (op1)) && (tem = simplify_plus_minus (code, mode, op0, op1, 0)) != 0) return tem; /* Reassociate floating point addition only when the user specifies unsafe math optimizations. */ if (FLOAT_MODE_P (mode) && flag_unsafe_math_optimizations) { tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; } break; case COMPARE: #ifdef HAVE_cc0 /* Convert (compare FOO (const_int 0)) to FOO unless we aren't using cc0, in which case we want to leave it as a COMPARE so we can distinguish it from a register-register-copy. In IEEE floating point, x-0 is not the same as x. */ if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT || ! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) && trueop1 == CONST0_RTX (mode)) return op0; #endif /* Convert (compare (gt (flags) 0) (lt (flags) 0)) to (flags). */ if (((GET_CODE (op0) == GT && GET_CODE (op1) == LT) || (GET_CODE (op0) == GTU && GET_CODE (op1) == LTU)) && XEXP (op0, 1) == const0_rtx && XEXP (op1, 1) == const0_rtx) { rtx xop00 = XEXP (op0, 0); rtx xop10 = XEXP (op1, 0); #ifdef HAVE_cc0 if (GET_CODE (xop00) == CC0 && GET_CODE (xop10) == CC0) #else if (REG_P (xop00) && REG_P (xop10) && GET_MODE (xop00) == GET_MODE (xop10) && REGNO (xop00) == REGNO (xop10) && GET_MODE_CLASS (GET_MODE (xop00)) == MODE_CC && GET_MODE_CLASS (GET_MODE (xop10)) == MODE_CC) #endif return xop00; } break; case MINUS: /* We can't assume x-x is 0 even with non-IEEE floating point, but since it is zero except in very strange circumstances, we will treat it as zero with -funsafe-math-optimizations. */ if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0) && (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations)) return CONST0_RTX (mode); /* Change subtraction from zero into negation. (0 - x) is the same as -x when x is NaN, infinite, or finite and nonzero. But if the mode has signed zeros, and does not round towards -infinity, then 0 - 0 is 0, not -0. */ if (!HONOR_SIGNED_ZEROS (mode) && trueop0 == CONST0_RTX (mode)) return simplify_gen_unary (NEG, mode, op1, mode); /* (-1 - a) is ~a. */ if (trueop0 == constm1_rtx) return simplify_gen_unary (NOT, mode, op1, mode); /* Subtracting 0 has no effect unless the mode has signed zeros and supports rounding towards -infinity. In such a case, 0 - 0 is -0. */ if (!(HONOR_SIGNED_ZEROS (mode) && HONOR_SIGN_DEPENDENT_ROUNDING (mode)) && trueop1 == CONST0_RTX (mode)) return op0; /* See if this is something like X * C - X or vice versa or if the multiplication is written as a shift. If so, we can distribute and make a new multiply, shift, or maybe just have X (if C is 2 in the example above). But don't make something more expensive than we had before. */ if (! FLOAT_MODE_P (mode)) { HOST_WIDE_INT coeff0 = 1, coeff1 = 1; rtx lhs = op0, rhs = op1; if (GET_CODE (lhs) == NEG) coeff0 = -1, lhs = XEXP (lhs, 0); else if (GET_CODE (lhs) == MULT && GET_CODE (XEXP (lhs, 1)) == CONST_INT) { coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0); } else if (GET_CODE (lhs) == ASHIFT && GET_CODE (XEXP (lhs, 1)) == CONST_INT && INTVAL (XEXP (lhs, 1)) >= 0 && INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1)); lhs = XEXP (lhs, 0); } if (GET_CODE (rhs) == NEG) coeff1 = - 1, rhs = XEXP (rhs, 0); else if (GET_CODE (rhs) == MULT && GET_CODE (XEXP (rhs, 1)) == CONST_INT) { coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0); } else if (GET_CODE (rhs) == ASHIFT && GET_CODE (XEXP (rhs, 1)) == CONST_INT && INTVAL (XEXP (rhs, 1)) >= 0 && INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT) { coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1)); rhs = XEXP (rhs, 0); } if (rtx_equal_p (lhs, rhs)) { rtx orig = gen_rtx_MINUS (mode, op0, op1); tem = simplify_gen_binary (MULT, mode, lhs, GEN_INT (coeff0 - coeff1)); return rtx_cost (tem, SET) <= rtx_cost (orig, SET) ? tem : 0; } } /* (a - (-b)) -> (a + b). True even for IEEE. */ if (GET_CODE (op1) == NEG) return simplify_gen_binary (PLUS, mode, op0, XEXP (op1, 0)); /* (-x - c) may be simplified as (-c - x). */ if (GET_CODE (op0) == NEG && (GET_CODE (op1) == CONST_INT || GET_CODE (op1) == CONST_DOUBLE)) { tem = simplify_unary_operation (NEG, mode, op1, mode); if (tem) return simplify_gen_binary (MINUS, mode, tem, XEXP (op0, 0)); } /* If one of the operands is a PLUS or a MINUS, see if we can simplify this by the associative law. Don't use the associative law for floating point. The inaccuracy makes it nonassociative, and subtle programs can break if operations are associated. */ if (INTEGRAL_MODE_P (mode) && (plus_minus_operand_p (op0) || plus_minus_operand_p (op1)) && (tem = simplify_plus_minus (code, mode, op0, op1, 0)) != 0) return tem; /* Don't let a relocatable value get a negative coeff. */ if (GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode) return simplify_gen_binary (PLUS, mode, op0, neg_const_int (mode, op1)); /* (x - (x & y)) -> (x & ~y) */ if (GET_CODE (op1) == AND) { if (rtx_equal_p (op0, XEXP (op1, 0))) { tem = simplify_gen_unary (NOT, mode, XEXP (op1, 1), GET_MODE (XEXP (op1, 1))); return simplify_gen_binary (AND, mode, op0, tem); } if (rtx_equal_p (op0, XEXP (op1, 1))) { tem = simplify_gen_unary (NOT, mode, XEXP (op1, 0), GET_MODE (XEXP (op1, 0))); return simplify_gen_binary (AND, mode, op0, tem); } } break; case MULT: if (trueop1 == constm1_rtx) return simplify_gen_unary (NEG, mode, op0, mode); /* Maybe simplify x * 0 to 0. The reduction is not valid if x is NaN, since x * 0 is then also NaN. Nor is it valid when the mode has signed zeros, since multiplying a negative number by 0 will give -0, not 0. */ if (!HONOR_NANS (mode) && !HONOR_SIGNED_ZEROS (mode) && trueop1 == CONST0_RTX (mode) && ! side_effects_p (op0)) return op1; /* In IEEE floating point, x*1 is not equivalent to x for signalling NaNs. */ if (!HONOR_SNANS (mode) && trueop1 == CONST1_RTX (mode)) return op0; /* Convert multiply by constant power of two into shift unless we are still generating RTL. This test is a kludge. */ if (GET_CODE (trueop1) == CONST_INT && (val = exact_log2 (INTVAL (trueop1))) >= 0 /* If the mode is larger than the host word size, and the uppermost bit is set, then this isn't a power of two due to implicit sign extension. */ && (width <= HOST_BITS_PER_WIDE_INT || val != HOST_BITS_PER_WIDE_INT - 1)) return simplify_gen_binary (ASHIFT, mode, op0, GEN_INT (val)); /* x*2 is x+x and x*(-1) is -x */ if (GET_CODE (trueop1) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (trueop1)) == MODE_FLOAT && GET_MODE (op0) == mode) { REAL_VALUE_TYPE d; REAL_VALUE_FROM_CONST_DOUBLE (d, trueop1); if (REAL_VALUES_EQUAL (d, dconst2)) return simplify_gen_binary (PLUS, mode, op0, copy_rtx (op0)); if (REAL_VALUES_EQUAL (d, dconstm1)) return simplify_gen_unary (NEG, mode, op0, mode); } /* Reassociate multiplication, but for floating point MULTs only when the user specifies unsafe math optimizations. */ if (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations) { tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; } break; case IOR: if (trueop1 == const0_rtx) return op0; if (GET_CODE (trueop1) == CONST_INT && ((INTVAL (trueop1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode))) return op1; if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0)) return op0; /* A | (~A) -> -1 */ if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return constm1_rtx; tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case XOR: if (trueop1 == const0_rtx) return op0; if (GET_CODE (trueop1) == CONST_INT && ((INTVAL (trueop1) & GET_MODE_MASK (mode)) == GET_MODE_MASK (mode))) return simplify_gen_unary (NOT, mode, op0, mode); if (trueop0 == trueop1 && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return const0_rtx; /* Canonicalize XOR of the most significant bit to PLUS. */ if ((GET_CODE (op1) == CONST_INT || GET_CODE (op1) == CONST_DOUBLE) && mode_signbit_p (mode, op1)) return simplify_gen_binary (PLUS, mode, op0, op1); /* (xor (plus X C1) C2) is (xor X (C1^C2)) if C1 is signbit. */ if ((GET_CODE (op1) == CONST_INT || GET_CODE (op1) == CONST_DOUBLE) && GET_CODE (op0) == PLUS && (GET_CODE (XEXP (op0, 1)) == CONST_INT || GET_CODE (XEXP (op0, 1)) == CONST_DOUBLE) && mode_signbit_p (mode, XEXP (op0, 1))) return simplify_gen_binary (XOR, mode, XEXP (op0, 0), simplify_gen_binary (XOR, mode, op1, XEXP (op0, 1))); tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case AND: if (trueop1 == const0_rtx && ! side_effects_p (op0)) return const0_rtx; /* If we are turning off bits already known off in OP0, we need not do an AND. */ if (GET_CODE (trueop1) == CONST_INT && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT && (nonzero_bits (trueop0, mode) & ~INTVAL (trueop1)) == 0) return op0; if (trueop0 == trueop1 && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return op0; /* A & (~A) -> 0 */ if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1)) || (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0))) && ! side_effects_p (op0) && GET_MODE_CLASS (mode) != MODE_CC) return const0_rtx; /* For constants M and N, if M == (1LL << cst) - 1 && (N & M) == M, ((A & N) + B) & M -> (A + B) & M Similarly if (N & M) == 0, ((A | N) + B) & M -> (A + B) & M and for - instead of + and/or ^ instead of |. */ if (GET_CODE (trueop1) == CONST_INT && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT && ~INTVAL (trueop1) && (INTVAL (trueop1) & (INTVAL (trueop1) + 1)) == 0 && (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS)) { rtx pmop[2]; int which; pmop[0] = XEXP (op0, 0); pmop[1] = XEXP (op0, 1); for (which = 0; which < 2; which++) { tem = pmop[which]; switch (GET_CODE (tem)) { case AND: if (GET_CODE (XEXP (tem, 1)) == CONST_INT && (INTVAL (XEXP (tem, 1)) & INTVAL (trueop1)) == INTVAL (trueop1)) pmop[which] = XEXP (tem, 0); break; case IOR: case XOR: if (GET_CODE (XEXP (tem, 1)) == CONST_INT && (INTVAL (XEXP (tem, 1)) & INTVAL (trueop1)) == 0) pmop[which] = XEXP (tem, 0); break; default: break; } } if (pmop[0] != XEXP (op0, 0) || pmop[1] != XEXP (op0, 1)) { tem = simplify_gen_binary (GET_CODE (op0), mode, pmop[0], pmop[1]); return simplify_gen_binary (code, mode, tem, op1); } } tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case UDIV: /* 0/x is 0 (or x&0 if x has side-effects). */ if (trueop0 == const0_rtx) return side_effects_p (op1) ? simplify_gen_binary (AND, mode, op1, const0_rtx) : const0_rtx; /* x/1 is x. */ if (trueop1 == const1_rtx) { /* Handle narrowing UDIV. */ rtx x = gen_lowpart_common (mode, op0); if (x) return x; if (mode != GET_MODE (op0) && GET_MODE (op0) != VOIDmode) return gen_lowpart_SUBREG (mode, op0); return op0; } /* Convert divide by power of two into shift. */ if (GET_CODE (trueop1) == CONST_INT && (arg1 = exact_log2 (INTVAL (trueop1))) > 0) return simplify_gen_binary (LSHIFTRT, mode, op0, GEN_INT (arg1)); break; case DIV: /* Handle floating point and integers separately. */ if (GET_MODE_CLASS (mode) == MODE_FLOAT) { /* Maybe change 0.0 / x to 0.0. This transformation isn't safe for modes with NaNs, since 0.0 / 0.0 will then be NaN rather than 0.0. Nor is it safe for modes with signed zeros, since dividing 0 by a negative number gives -0.0 */ if (trueop0 == CONST0_RTX (mode) && !HONOR_NANS (mode) && !HONOR_SIGNED_ZEROS (mode) && ! side_effects_p (op1)) return op0; /* x/1.0 is x. */ if (trueop1 == CONST1_RTX (mode) && !HONOR_SNANS (mode)) return op0; if (GET_CODE (trueop1) == CONST_DOUBLE && trueop1 != CONST0_RTX (mode)) { REAL_VALUE_TYPE d; REAL_VALUE_FROM_CONST_DOUBLE (d, trueop1); /* x/-1.0 is -x. */ if (REAL_VALUES_EQUAL (d, dconstm1) && !HONOR_SNANS (mode)) return simplify_gen_unary (NEG, mode, op0, mode); /* Change FP division by a constant into multiplication. Only do this with -funsafe-math-optimizations. */ if (flag_unsafe_math_optimizations && !REAL_VALUES_EQUAL (d, dconst0)) { REAL_ARITHMETIC (d, RDIV_EXPR, dconst1, d); tem = CONST_DOUBLE_FROM_REAL_VALUE (d, mode); return simplify_gen_binary (MULT, mode, op0, tem); } } } else { /* 0/x is 0 (or x&0 if x has side-effects). */ if (trueop0 == const0_rtx) return side_effects_p (op1) ? simplify_gen_binary (AND, mode, op1, const0_rtx) : const0_rtx; /* x/1 is x. */ if (trueop1 == const1_rtx) { /* Handle narrowing DIV. */ rtx x = gen_lowpart_common (mode, op0); if (x) return x; if (mode != GET_MODE (op0) && GET_MODE (op0) != VOIDmode) return gen_lowpart_SUBREG (mode, op0); return op0; } /* x/-1 is -x. */ if (trueop1 == constm1_rtx) { rtx x = gen_lowpart_common (mode, op0); if (!x) x = (mode != GET_MODE (op0) && GET_MODE (op0) != VOIDmode) ? gen_lowpart_SUBREG (mode, op0) : op0; return simplify_gen_unary (NEG, mode, x, mode); } } break; case UMOD: /* 0%x is 0 (or x&0 if x has side-effects). */ if (trueop0 == const0_rtx) return side_effects_p (op1) ? simplify_gen_binary (AND, mode, op1, const0_rtx) : const0_rtx; /* x%1 is 0 (of x&0 if x has side-effects). */ if (trueop1 == const1_rtx) return side_effects_p (op0) ? simplify_gen_binary (AND, mode, op0, const0_rtx) : const0_rtx; /* Implement modulus by power of two as AND. */ if (GET_CODE (trueop1) == CONST_INT && exact_log2 (INTVAL (trueop1)) > 0) return simplify_gen_binary (AND, mode, op0, GEN_INT (INTVAL (op1) - 1)); break; case MOD: /* 0%x is 0 (or x&0 if x has side-effects). */ if (trueop0 == const0_rtx) return side_effects_p (op1) ? simplify_gen_binary (AND, mode, op1, const0_rtx) : const0_rtx; /* x%1 and x%-1 is 0 (or x&0 if x has side-effects). */ if (trueop1 == const1_rtx || trueop1 == constm1_rtx) return side_effects_p (op0) ? simplify_gen_binary (AND, mode, op0, const0_rtx) : const0_rtx; break; case ROTATERT: case ROTATE: case ASHIFTRT: /* Rotating ~0 always results in ~0. */ if (GET_CODE (trueop0) == CONST_INT && width <= HOST_BITS_PER_WIDE_INT && (unsigned HOST_WIDE_INT) INTVAL (trueop0) == GET_MODE_MASK (mode) && ! side_effects_p (op1)) return op0; /* Fall through.... */ case ASHIFT: case LSHIFTRT: if (trueop1 == const0_rtx) return op0; if (trueop0 == const0_rtx && ! side_effects_p (op1)) return op0; break; case SMIN: if (width <= HOST_BITS_PER_WIDE_INT && GET_CODE (trueop1) == CONST_INT && INTVAL (trueop1) == (HOST_WIDE_INT) 1 << (width -1) && ! side_effects_p (op0)) return op1; if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0)) return op0; tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case SMAX: if (width <= HOST_BITS_PER_WIDE_INT && GET_CODE (trueop1) == CONST_INT && ((unsigned HOST_WIDE_INT) INTVAL (trueop1) == (unsigned HOST_WIDE_INT) GET_MODE_MASK (mode) >> 1) && ! side_effects_p (op0)) return op1; if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0)) return op0; tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case UMIN: if (trueop1 == const0_rtx && ! side_effects_p (op0)) return op1; if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0)) return op0; tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case UMAX: if (trueop1 == constm1_rtx && ! side_effects_p (op0)) return op1; if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0)) return op0; tem = simplify_associative_operation (code, mode, op0, op1); if (tem) return tem; break; case SS_PLUS: case US_PLUS: case SS_MINUS: case US_MINUS: /* ??? There are simplifications that can be done. */ return 0; case VEC_SELECT: if (!VECTOR_MODE_P (mode)) { gcc_assert (VECTOR_MODE_P (GET_MODE (trueop0))); gcc_assert (mode == GET_MODE_INNER (GET_MODE (trueop0))); gcc_assert (GET_CODE (trueop1) == PARALLEL); gcc_assert (XVECLEN (trueop1, 0) == 1); gcc_assert (GET_CODE (XVECEXP (trueop1, 0, 0)) == CONST_INT); if (GET_CODE (trueop0) == CONST_VECTOR) return CONST_VECTOR_ELT (trueop0, INTVAL (XVECEXP (trueop1, 0, 0))); } else { gcc_assert (VECTOR_MODE_P (GET_MODE (trueop0))); gcc_assert (GET_MODE_INNER (mode) == GET_MODE_INNER (GET_MODE (trueop0))); gcc_assert (GET_CODE (trueop1) == PARALLEL); if (GET_CODE (trueop0) == CONST_VECTOR) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); rtvec v = rtvec_alloc (n_elts); unsigned int i; gcc_assert (XVECLEN (trueop1, 0) == (int) n_elts); for (i = 0; i < n_elts; i++) { rtx x = XVECEXP (trueop1, 0, i); gcc_assert (GET_CODE (x) == CONST_INT); RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop0, INTVAL (x)); } return gen_rtx_CONST_VECTOR (mode, v); } } return 0; case VEC_CONCAT: { enum machine_mode op0_mode = (GET_MODE (trueop0) != VOIDmode ? GET_MODE (trueop0) : GET_MODE_INNER (mode)); enum machine_mode op1_mode = (GET_MODE (trueop1) != VOIDmode ? GET_MODE (trueop1) : GET_MODE_INNER (mode)); gcc_assert (VECTOR_MODE_P (mode)); gcc_assert (GET_MODE_SIZE (op0_mode) + GET_MODE_SIZE (op1_mode) == GET_MODE_SIZE (mode)); if (VECTOR_MODE_P (op0_mode)) gcc_assert (GET_MODE_INNER (mode) == GET_MODE_INNER (op0_mode)); else gcc_assert (GET_MODE_INNER (mode) == op0_mode); if (VECTOR_MODE_P (op1_mode)) gcc_assert (GET_MODE_INNER (mode) == GET_MODE_INNER (op1_mode)); else gcc_assert (GET_MODE_INNER (mode) == op1_mode); if ((GET_CODE (trueop0) == CONST_VECTOR || GET_CODE (trueop0) == CONST_INT || GET_CODE (trueop0) == CONST_DOUBLE) && (GET_CODE (trueop1) == CONST_VECTOR || GET_CODE (trueop1) == CONST_INT || GET_CODE (trueop1) == CONST_DOUBLE)) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); rtvec v = rtvec_alloc (n_elts); unsigned int i; unsigned in_n_elts = 1; if (VECTOR_MODE_P (op0_mode)) in_n_elts = (GET_MODE_SIZE (op0_mode) / elt_size); for (i = 0; i < n_elts; i++) { if (i < in_n_elts) { if (!VECTOR_MODE_P (op0_mode)) RTVEC_ELT (v, i) = trueop0; else RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop0, i); } else { if (!VECTOR_MODE_P (op1_mode)) RTVEC_ELT (v, i) = trueop1; else RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop1, i - in_n_elts); } } return gen_rtx_CONST_VECTOR (mode, v); } } return 0; default: gcc_unreachable (); } return 0; } /* Get the integer argument values in two forms: zero-extended in ARG0, ARG1 and sign-extended in ARG0S, ARG1S. */ arg0 = INTVAL (trueop0); arg1 = INTVAL (trueop1); if (width < HOST_BITS_PER_WIDE_INT) { arg0 &= ((HOST_WIDE_INT) 1 << width) - 1; arg1 &= ((HOST_WIDE_INT) 1 << width) - 1; arg0s = arg0; if (arg0s & ((HOST_WIDE_INT) 1 << (width - 1))) arg0s |= ((HOST_WIDE_INT) (-1) << width); arg1s = arg1; if (arg1s & ((HOST_WIDE_INT) 1 << (width - 1))) arg1s |= ((HOST_WIDE_INT) (-1) << width); } else { arg0s = arg0; arg1s = arg1; } /* Compute the value of the arithmetic. */ switch (code) { case PLUS: val = arg0s + arg1s; break; case MINUS: val = arg0s - arg1s; break; case MULT: val = arg0s * arg1s; break; case DIV: if (arg1s == 0 || (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1) && arg1s == -1)) return 0; val = arg0s / arg1s; break; case MOD: if (arg1s == 0 || (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1) && arg1s == -1)) return 0; val = arg0s % arg1s; break; case UDIV: if (arg1 == 0 || (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1) && arg1s == -1)) return 0; val = (unsigned HOST_WIDE_INT) arg0 / arg1; break; case UMOD: if (arg1 == 0 || (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1) && arg1s == -1)) return 0; val = (unsigned HOST_WIDE_INT) arg0 % arg1; break; case AND: val = arg0 & arg1; break; case IOR: val = arg0 | arg1; break; case XOR: val = arg0 ^ arg1; break; case LSHIFTRT: case ASHIFT: case ASHIFTRT: /* Truncate the shift if SHIFT_COUNT_TRUNCATED, otherwise make sure the value is in range. We can't return any old value for out-of-range arguments because either the middle-end (via shift_truncation_mask) or the back-end might be relying on target-specific knowledge. Nor can we rely on shift_truncation_mask, since the shift might not be part of an ashlM3, lshrM3 or ashrM3 instruction. */ if (SHIFT_COUNT_TRUNCATED) arg1 = (unsigned HOST_WIDE_INT) arg1 % width; else if (arg1 < 0 || arg1 >= GET_MODE_BITSIZE (mode)) return 0; val = (code == ASHIFT ? ((unsigned HOST_WIDE_INT) arg0) << arg1 : ((unsigned HOST_WIDE_INT) arg0) >> arg1); /* Sign-extend the result for arithmetic right shifts. */ if (code == ASHIFTRT && arg0s < 0 && arg1 > 0) val |= ((HOST_WIDE_INT) -1) << (width - arg1); break; case ROTATERT: if (arg1 < 0) return 0; arg1 %= width; val = ((((unsigned HOST_WIDE_INT) arg0) << (width - arg1)) | (((unsigned HOST_WIDE_INT) arg0) >> arg1)); break; case ROTATE: if (arg1 < 0) return 0; arg1 %= width; val = ((((unsigned HOST_WIDE_INT) arg0) << arg1) | (((unsigned HOST_WIDE_INT) arg0) >> (width - arg1))); break; case COMPARE: /* Do nothing here. */ return 0; case SMIN: val = arg0s <= arg1s ? arg0s : arg1s; break; case UMIN: val = ((unsigned HOST_WIDE_INT) arg0 <= (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1); break; case SMAX: val = arg0s > arg1s ? arg0s : arg1s; break; case UMAX: val = ((unsigned HOST_WIDE_INT) arg0 > (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1); break; case SS_PLUS: case US_PLUS: case SS_MINUS: case US_MINUS: /* ??? There are simplifications that can be done. */ return 0; default: gcc_unreachable (); } val = trunc_int_for_mode (val, mode); return GEN_INT (val); } /* Simplify a PLUS or MINUS, at least one of whose operands may be another PLUS or MINUS. Rather than test for specific case, we do this by a brute-force method and do all possible simplifications until no more changes occur. Then we rebuild the operation. If FORCE is true, then always generate the rtx. This is used to canonicalize stuff emitted from simplify_gen_binary. Note that this can still fail if the rtx is too complex. It won't fail just because the result is not 'simpler' than the input, however. */ struct simplify_plus_minus_op_data { rtx op; int neg; }; static int simplify_plus_minus_op_data_cmp (const void *p1, const void *p2) { const struct simplify_plus_minus_op_data *d1 = p1; const struct simplify_plus_minus_op_data *d2 = p2; return (commutative_operand_precedence (d2->op) - commutative_operand_precedence (d1->op)); } static rtx simplify_plus_minus (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1, int force) { struct simplify_plus_minus_op_data ops[8]; rtx result, tem; int n_ops = 2, input_ops = 2, input_consts = 0, n_consts; int first, changed; int i, j; memset (ops, 0, sizeof ops); /* Set up the two operands and then expand them until nothing has been changed. If we run out of room in our array, give up; this should almost never happen. */ ops[0].op = op0; ops[0].neg = 0; ops[1].op = op1; ops[1].neg = (code == MINUS); do { changed = 0; for (i = 0; i < n_ops; i++) { rtx this_op = ops[i].op; int this_neg = ops[i].neg; enum rtx_code this_code = GET_CODE (this_op); switch (this_code) { case PLUS: case MINUS: if (n_ops == 7) return NULL_RTX; ops[n_ops].op = XEXP (this_op, 1); ops[n_ops].neg = (this_code == MINUS) ^ this_neg; n_ops++; ops[i].op = XEXP (this_op, 0); input_ops++; changed = 1; break; case NEG: ops[i].op = XEXP (this_op, 0); ops[i].neg = ! this_neg; changed = 1; break; case CONST: if (n_ops < 7 && GET_CODE (XEXP (this_op, 0)) == PLUS && CONSTANT_P (XEXP (XEXP (this_op, 0), 0)) && CONSTANT_P (XEXP (XEXP (this_op, 0), 1))) { ops[i].op = XEXP (XEXP (this_op, 0), 0); ops[n_ops].op = XEXP (XEXP (this_op, 0), 1); ops[n_ops].neg = this_neg; n_ops++; input_consts++; changed = 1; } break; case NOT: /* ~a -> (-a - 1) */ if (n_ops != 7) { ops[n_ops].op = constm1_rtx; ops[n_ops++].neg = this_neg; ops[i].op = XEXP (this_op, 0); ops[i].neg = !this_neg; changed = 1; } break; case CONST_INT: if (this_neg) { ops[i].op = neg_const_int (mode, this_op); ops[i].neg = 0; changed = 1; } break; default: break; } } } while (changed); /* If we only have two operands, we can't do anything. */ if (n_ops <= 2 && !force) return NULL_RTX; /* Count the number of CONSTs we didn't split above. */ for (i = 0; i < n_ops; i++) if (GET_CODE (ops[i].op) == CONST) input_consts++; /* Now simplify each pair of operands until nothing changes. The first time through just simplify constants against each other. */ first = 1; do { changed = first; for (i = 0; i < n_ops - 1; i++) for (j = i + 1; j < n_ops; j++) { rtx lhs = ops[i].op, rhs = ops[j].op; int lneg = ops[i].neg, rneg = ops[j].neg; if (lhs != 0 && rhs != 0 && (! first || (CONSTANT_P (lhs) && CONSTANT_P (rhs)))) { enum rtx_code ncode = PLUS; if (lneg != rneg) { ncode = MINUS; if (lneg) tem = lhs, lhs = rhs, rhs = tem; } else if (swap_commutative_operands_p (lhs, rhs)) tem = lhs, lhs = rhs, rhs = tem; tem = simplify_binary_operation (ncode, mode, lhs, rhs); /* Reject "simplifications" that just wrap the two arguments in a CONST. Failure to do so can result in infinite recursion with simplify_binary_operation when it calls us to simplify CONST operations. */ if (tem && ! (GET_CODE (tem) == CONST && GET_CODE (XEXP (tem, 0)) == ncode && XEXP (XEXP (tem, 0), 0) == lhs && XEXP (XEXP (tem, 0), 1) == rhs) /* Don't allow -x + -1 -> ~x simplifications in the first pass. This allows us the chance to combine the -1 with other constants. */ && ! (first && GET_CODE (tem) == NOT && XEXP (tem, 0) == rhs)) { lneg &= rneg; if (GET_CODE (tem) == NEG) tem = XEXP (tem, 0), lneg = !lneg; if (GET_CODE (tem) == CONST_INT && lneg) tem = neg_const_int (mode, tem), lneg = 0; ops[i].op = tem; ops[i].neg = lneg; ops[j].op = NULL_RTX; changed = 1; } } } first = 0; } while (changed); /* Pack all the operands to the lower-numbered entries. */ for (i = 0, j = 0; j < n_ops; j++) if (ops[j].op) ops[i++] = ops[j]; n_ops = i; /* Sort the operations based on swap_commutative_operands_p. */ qsort (ops, n_ops, sizeof (*ops), simplify_plus_minus_op_data_cmp); /* Create (minus -C X) instead of (neg (const (plus X C))). */ if (n_ops == 2 && GET_CODE (ops[1].op) == CONST_INT && CONSTANT_P (ops[0].op) && ops[0].neg) return gen_rtx_fmt_ee (MINUS, mode, ops[1].op, ops[0].op); /* We suppressed creation of trivial CONST expressions in the combination loop to avoid recursion. Create one manually now. The combination loop should have ensured that there is exactly one CONST_INT, and the sort will have ensured that it is last in the array and that any other constant will be next-to-last. */ if (n_ops > 1 && GET_CODE (ops[n_ops - 1].op) == CONST_INT && CONSTANT_P (ops[n_ops - 2].op)) { rtx value = ops[n_ops - 1].op; if (ops[n_ops - 1].neg ^ ops[n_ops - 2].neg) value = neg_const_int (mode, value); ops[n_ops - 2].op = plus_constant (ops[n_ops - 2].op, INTVAL (value)); n_ops--; } /* Count the number of CONSTs that we generated. */ n_consts = 0; for (i = 0; i < n_ops; i++) if (GET_CODE (ops[i].op) == CONST) n_consts++; /* Give up if we didn't reduce the number of operands we had. Make sure we count a CONST as two operands. If we have the same number of operands, but have made more CONSTs than before, this is also an improvement, so accept it. */ if (!force && (n_ops + n_consts > input_ops || (n_ops + n_consts == input_ops && n_consts <= input_consts))) return NULL_RTX; /* Put a non-negated operand first, if possible. */ for (i = 0; i < n_ops && ops[i].neg; i++) continue; if (i == n_ops) ops[0].op = gen_rtx_NEG (mode, ops[0].op); else if (i != 0) { tem = ops[0].op; ops[0] = ops[i]; ops[i].op = tem; ops[i].neg = 1; } /* Now make the result by performing the requested operations. */ result = ops[0].op; for (i = 1; i < n_ops; i++) result = gen_rtx_fmt_ee (ops[i].neg ? MINUS : PLUS, mode, result, ops[i].op); return result; } /* Check whether an operand is suitable for calling simplify_plus_minus. */ static bool plus_minus_operand_p (rtx x) { return GET_CODE (x) == PLUS || GET_CODE (x) == MINUS || (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && CONSTANT_P (XEXP (XEXP (x, 0), 0)) && CONSTANT_P (XEXP (XEXP (x, 0), 1))); } /* Like simplify_binary_operation except used for relational operators. MODE is the mode of the result. If MODE is VOIDmode, both operands must not also be VOIDmode. CMP_MODE specifies in which mode the comparison is done in, so it is the mode of the operands. If CMP_MODE is VOIDmode, it is taken from the operands or, if both are VOIDmode, the operands are compared in "infinite precision". */ rtx simplify_relational_operation (enum rtx_code code, enum machine_mode mode, enum machine_mode cmp_mode, rtx op0, rtx op1) { rtx tem, trueop0, trueop1; if (cmp_mode == VOIDmode) cmp_mode = GET_MODE (op0); if (cmp_mode == VOIDmode) cmp_mode = GET_MODE (op1); tem = simplify_const_relational_operation (code, cmp_mode, op0, op1); if (tem) { if (GET_MODE_CLASS (mode) == MODE_FLOAT) { if (tem == const0_rtx) return CONST0_RTX (mode); #ifdef FLOAT_STORE_FLAG_VALUE { REAL_VALUE_TYPE val; val = FLOAT_STORE_FLAG_VALUE (mode); return CONST_DOUBLE_FROM_REAL_VALUE (val, mode); } #else return NULL_RTX; #endif } if (VECTOR_MODE_P (mode)) { if (tem == const0_rtx) return CONST0_RTX (mode); #ifdef VECTOR_STORE_FLAG_VALUE { int i, units; rtvec c; rtx val = VECTOR_STORE_FLAG_VALUE (mode); if (val == NULL_RTX) return NULL_RTX; if (val == const1_rtx) return CONST1_RTX (mode); units = GET_MODE_NUNITS (mode); v = rtvec_alloc (units); for (i = 0; i < units; i++) RTVEC_ELT (v, i) = val; return gen_rtx_raw_CONST_VECTOR (mode, v); } #else return NULL_RTX; #endif } return tem; } /* For the following tests, ensure const0_rtx is op1. */ if (swap_commutative_operands_p (op0, op1) || (op0 == const0_rtx && op1 != const0_rtx)) tem = op0, op0 = op1, op1 = tem, code = swap_condition (code); /* If op0 is a compare, extract the comparison arguments from it. */ if (GET_CODE (op0) == COMPARE && op1 == const0_rtx) return simplify_relational_operation (code, mode, VOIDmode, XEXP (op0, 0), XEXP (op0, 1)); if (mode == VOIDmode || GET_MODE_CLASS (cmp_mode) == MODE_CC || CC0_P (op0)) return NULL_RTX; trueop0 = avoid_constant_pool_reference (op0); trueop1 = avoid_constant_pool_reference (op1); return simplify_relational_operation_1 (code, mode, cmp_mode, trueop0, trueop1); } /* This part of simplify_relational_operation is only used when CMP_MODE is not in class MODE_CC (i.e. it is a real comparison). MODE is the mode of the result, while CMP_MODE specifies in which mode the comparison is done in, so it is the mode of the operands. */ static rtx simplify_relational_operation_1 (enum rtx_code code, enum machine_mode mode, enum machine_mode cmp_mode, rtx op0, rtx op1) { enum rtx_code op0code = GET_CODE (op0); if (GET_CODE (op1) == CONST_INT) { if (INTVAL (op1) == 0 && COMPARISON_P (op0)) { /* If op0 is a comparison, extract the comparison arguments form it. */ if (code == NE) { if (GET_MODE (op0) == cmp_mode) return simplify_rtx (op0); else return simplify_gen_relational (GET_CODE (op0), mode, VOIDmode, XEXP (op0, 0), XEXP (op0, 1)); } else if (code == EQ) { enum rtx_code new_code = reversed_comparison_code (op0, NULL_RTX); if (new_code != UNKNOWN) return simplify_gen_relational (new_code, mode, VOIDmode, XEXP (op0, 0), XEXP (op0, 1)); } } } /* (eq/ne (plus x cst1) cst2) simplifies to (eq/ne x (cst2 - cst1)) */ if ((code == EQ || code == NE) && (op0code == PLUS || op0code == MINUS) && CONSTANT_P (op1) && CONSTANT_P (XEXP (op0, 1)) && (INTEGRAL_MODE_P (cmp_mode) || flag_unsafe_math_optimizations)) { rtx x = XEXP (op0, 0); rtx c = XEXP (op0, 1); c = simplify_gen_binary (op0code == PLUS ? MINUS : PLUS, cmp_mode, op1, c); return simplify_gen_relational (code, mode, cmp_mode, x, c); } return NULL_RTX; } /* Check if the given comparison (done in the given MODE) is actually a tautology or a contradiction. If no simplification is possible, this function returns zero. Otherwise, it returns either const_true_rtx or const0_rtx. */ rtx simplify_const_relational_operation (enum rtx_code code, enum machine_mode mode, rtx op0, rtx op1) { int equal, op0lt, op0ltu, op1lt, op1ltu; rtx tem; rtx trueop0; rtx trueop1; gcc_assert (mode != VOIDmode || (GET_MODE (op0) == VOIDmode && GET_MODE (op1) == VOIDmode)); /* If op0 is a compare, extract the comparison arguments from it. */ if (GET_CODE (op0) == COMPARE && op1 == const0_rtx) op1 = XEXP (op0, 1), op0 = XEXP (op0, 0); /* We can't simplify MODE_CC values since we don't know what the actual comparison is. */ if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC || CC0_P (op0)) return 0; /* Make sure the constant is second. */ if (swap_commutative_operands_p (op0, op1)) { tem = op0, op0 = op1, op1 = tem; code = swap_condition (code); } trueop0 = avoid_constant_pool_reference (op0); trueop1 = avoid_constant_pool_reference (op1); /* For integer comparisons of A and B maybe we can simplify A - B and can then simplify a comparison of that with zero. If A and B are both either a register or a CONST_INT, this can't help; testing for these cases will prevent infinite recursion here and speed things up. If CODE is an unsigned comparison, then we can never do this optimization, because it gives an incorrect result if the subtraction wraps around zero. ANSI C defines unsigned operations such that they never overflow, and thus such cases can not be ignored; but we cannot do it even for signed comparisons for languages such as Java, so test flag_wrapv. */ if (!flag_wrapv && INTEGRAL_MODE_P (mode) && trueop1 != const0_rtx && ! ((REG_P (op0) || GET_CODE (trueop0) == CONST_INT) && (REG_P (op1) || GET_CODE (trueop1) == CONST_INT)) && 0 != (tem = simplify_binary_operation (MINUS, mode, op0, op1)) /* We cannot do this for == or != if tem is a nonzero address. */ && ((code != EQ && code != NE) || ! nonzero_address_p (tem)) && code != GTU && code != GEU && code != LTU && code != LEU) return simplify_const_relational_operation (signed_condition (code), mode, tem, const0_rtx); if (flag_unsafe_math_optimizations && code == ORDERED) return const_true_rtx; if (flag_unsafe_math_optimizations && code == UNORDERED) return const0_rtx; /* For modes without NaNs, if the two operands are equal, we know the result except if they have side-effects. */ if (! HONOR_NANS (GET_MODE (trueop0)) && rtx_equal_p (trueop0, trueop1) && ! side_effects_p (trueop0)) equal = 1, op0lt = 0, op0ltu = 0, op1lt = 0, op1ltu = 0; /* If the operands are floating-point constants, see if we can fold the result. */ else if (GET_CODE (trueop0) == CONST_DOUBLE && GET_CODE (trueop1) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (trueop0)) == MODE_FLOAT) { REAL_VALUE_TYPE d0, d1; REAL_VALUE_FROM_CONST_DOUBLE (d0, trueop0); REAL_VALUE_FROM_CONST_DOUBLE (d1, trueop1); /* Comparisons are unordered iff at least one of the values is NaN. */ if (REAL_VALUE_ISNAN (d0) || REAL_VALUE_ISNAN (d1)) switch (code) { case UNEQ: case UNLT: case UNGT: case UNLE: case UNGE: case NE: case UNORDERED: return const_true_rtx; case EQ: case LT: case GT: case LE: case GE: case LTGT: case ORDERED: return const0_rtx; default: return 0; } equal = REAL_VALUES_EQUAL (d0, d1); op0lt = op0ltu = REAL_VALUES_LESS (d0, d1); op1lt = op1ltu = REAL_VALUES_LESS (d1, d0); } /* Otherwise, see if the operands are both integers. */ else if ((GET_MODE_CLASS (mode) == MODE_INT || mode == VOIDmode) && (GET_CODE (trueop0) == CONST_DOUBLE || GET_CODE (trueop0) == CONST_INT) && (GET_CODE (trueop1) == CONST_DOUBLE || GET_CODE (trueop1) == CONST_INT)) { int width = GET_MODE_BITSIZE (mode); HOST_WIDE_INT l0s, h0s, l1s, h1s; unsigned HOST_WIDE_INT l0u, h0u, l1u, h1u; /* Get the two words comprising each integer constant. */ if (GET_CODE (trueop0) == CONST_DOUBLE) { l0u = l0s = CONST_DOUBLE_LOW (trueop0); h0u = h0s = CONST_DOUBLE_HIGH (trueop0); } else { l0u = l0s = INTVAL (trueop0); h0u = h0s = HWI_SIGN_EXTEND (l0s); } if (GET_CODE (trueop1) == CONST_DOUBLE) { l1u = l1s = CONST_DOUBLE_LOW (trueop1); h1u = h1s = CONST_DOUBLE_HIGH (trueop1); } else { l1u = l1s = INTVAL (trueop1); h1u = h1s = HWI_SIGN_EXTEND (l1s); } /* If WIDTH is nonzero and smaller than HOST_BITS_PER_WIDE_INT, we have to sign or zero-extend the values. */ if (width != 0 && width < HOST_BITS_PER_WIDE_INT) { l0u &= ((HOST_WIDE_INT) 1 << width) - 1; l1u &= ((HOST_WIDE_INT) 1 << width) - 1; if (l0s & ((HOST_WIDE_INT) 1 << (width - 1))) l0s |= ((HOST_WIDE_INT) (-1) << width); if (l1s & ((HOST_WIDE_INT) 1 << (width - 1))) l1s |= ((HOST_WIDE_INT) (-1) << width); } if (width != 0 && width <= HOST_BITS_PER_WIDE_INT) h0u = h1u = 0, h0s = HWI_SIGN_EXTEND (l0s), h1s = HWI_SIGN_EXTEND (l1s); equal = (h0u == h1u && l0u == l1u); op0lt = (h0s < h1s || (h0s == h1s && l0u < l1u)); op1lt = (h1s < h0s || (h1s == h0s && l1u < l0u)); op0ltu = (h0u < h1u || (h0u == h1u && l0u < l1u)); op1ltu = (h1u < h0u || (h1u == h0u && l1u < l0u)); } /* Otherwise, there are some code-specific tests we can make. */ else { /* Optimize comparisons with upper and lower bounds. */ if (SCALAR_INT_MODE_P (mode) && GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT) { rtx mmin, mmax; int sign; if (code == GEU || code == LEU || code == GTU || code == LTU) sign = 0; else sign = 1; get_mode_bounds (mode, sign, mode, &mmin, &mmax); tem = NULL_RTX; switch (code) { case GEU: case GE: /* x >= min is always true. */ if (rtx_equal_p (trueop1, mmin)) tem = const_true_rtx; else break; case LEU: case LE: /* x <= max is always true. */ if (rtx_equal_p (trueop1, mmax)) tem = const_true_rtx; break; case GTU: case GT: /* x > max is always false. */ if (rtx_equal_p (trueop1, mmax)) tem = const0_rtx; break; case LTU: case LT: /* x < min is always false. */ if (rtx_equal_p (trueop1, mmin)) tem = const0_rtx; break; default: break; } if (tem == const0_rtx || tem == const_true_rtx) return tem; } switch (code) { case EQ: if (trueop1 == const0_rtx && nonzero_address_p (op0)) return const0_rtx; break; case NE: if (trueop1 == const0_rtx && nonzero_address_p (op0)) return const_true_rtx; break; case LT: /* Optimize abs(x) < 0.0. */ if (trueop1 == CONST0_RTX (mode) && !HONOR_SNANS (mode)) { tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0) : trueop0; if (GET_CODE (tem) == ABS) return const0_rtx; } break; case GE: /* Optimize abs(x) >= 0.0. */ if (trueop1 == CONST0_RTX (mode) && !HONOR_NANS (mode)) { tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0) : trueop0; if (GET_CODE (tem) == ABS) return const_true_rtx; } break; case UNGE: /* Optimize ! (abs(x) < 0.0). */ if (trueop1 == CONST0_RTX (mode)) { tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0) : trueop0; if (GET_CODE (tem) == ABS) return const_true_rtx; } break; default: break; } return 0; } /* If we reach here, EQUAL, OP0LT, OP0LTU, OP1LT, and OP1LTU are set as appropriate. */ switch (code) { case EQ: case UNEQ: return equal ? const_true_rtx : const0_rtx; case NE: case LTGT: return ! equal ? const_true_rtx : const0_rtx; case LT: case UNLT: return op0lt ? const_true_rtx : const0_rtx; case GT: case UNGT: return op1lt ? const_true_rtx : const0_rtx; case LTU: return op0ltu ? const_true_rtx : const0_rtx; case GTU: return op1ltu ? const_true_rtx : const0_rtx; case LE: case UNLE: return equal || op0lt ? const_true_rtx : const0_rtx; case GE: case UNGE: return equal || op1lt ? const_true_rtx : const0_rtx; case LEU: return equal || op0ltu ? const_true_rtx : const0_rtx; case GEU: return equal || op1ltu ? const_true_rtx : const0_rtx; case ORDERED: return const_true_rtx; case UNORDERED: return const0_rtx; default: gcc_unreachable (); } } /* Simplify CODE, an operation with result mode MODE and three operands, OP0, OP1, and OP2. OP0_MODE was the mode of OP0 before it became a constant. Return 0 if no simplifications is possible. */ rtx simplify_ternary_operation (enum rtx_code code, enum machine_mode mode, enum machine_mode op0_mode, rtx op0, rtx op1, rtx op2) { unsigned int width = GET_MODE_BITSIZE (mode); /* VOIDmode means "infinite" precision. */ if (width == 0) width = HOST_BITS_PER_WIDE_INT; switch (code) { case SIGN_EXTRACT: case ZERO_EXTRACT: if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == CONST_INT && GET_CODE (op2) == CONST_INT && ((unsigned) INTVAL (op1) + (unsigned) INTVAL (op2) <= width) && width <= (unsigned) HOST_BITS_PER_WIDE_INT) { /* Extracting a bit-field from a constant */ HOST_WIDE_INT val = INTVAL (op0); if (BITS_BIG_ENDIAN) val >>= (GET_MODE_BITSIZE (op0_mode) - INTVAL (op2) - INTVAL (op1)); else val >>= INTVAL (op2); if (HOST_BITS_PER_WIDE_INT != INTVAL (op1)) { /* First zero-extend. */ val &= ((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1; /* If desired, propagate sign bit. */ if (code == SIGN_EXTRACT && (val & ((HOST_WIDE_INT) 1 << (INTVAL (op1) - 1)))) val |= ~ (((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1); } /* Clear the bits that don't belong in our mode, unless they and our sign bit are all one. So we get either a reasonable negative value or a reasonable unsigned value for this mode. */ if (width < HOST_BITS_PER_WIDE_INT && ((val & ((HOST_WIDE_INT) (-1) << (width - 1))) != ((HOST_WIDE_INT) (-1) << (width - 1)))) val &= ((HOST_WIDE_INT) 1 << width) - 1; return gen_int_mode (val, mode); } break; case IF_THEN_ELSE: if (GET_CODE (op0) == CONST_INT) return op0 != const0_rtx ? op1 : op2; /* Convert c ? a : a into "a". */ if (rtx_equal_p (op1, op2) && ! side_effects_p (op0)) return op1; /* Convert a != b ? a : b into "a". */ if (GET_CODE (op0) == NE && ! side_effects_p (op0) && ! HONOR_NANS (mode) && ! HONOR_SIGNED_ZEROS (mode) && ((rtx_equal_p (XEXP (op0, 0), op1) && rtx_equal_p (XEXP (op0, 1), op2)) || (rtx_equal_p (XEXP (op0, 0), op2) && rtx_equal_p (XEXP (op0, 1), op1)))) return op1; /* Convert a == b ? a : b into "b". */ if (GET_CODE (op0) == EQ && ! side_effects_p (op0) && ! HONOR_NANS (mode) && ! HONOR_SIGNED_ZEROS (mode) && ((rtx_equal_p (XEXP (op0, 0), op1) && rtx_equal_p (XEXP (op0, 1), op2)) || (rtx_equal_p (XEXP (op0, 0), op2) && rtx_equal_p (XEXP (op0, 1), op1)))) return op2; if (COMPARISON_P (op0) && ! side_effects_p (op0)) { enum machine_mode cmp_mode = (GET_MODE (XEXP (op0, 0)) == VOIDmode ? GET_MODE (XEXP (op0, 1)) : GET_MODE (XEXP (op0, 0))); rtx temp; /* Look for happy constants in op1 and op2. */ if (GET_CODE (op1) == CONST_INT && GET_CODE (op2) == CONST_INT) { HOST_WIDE_INT t = INTVAL (op1); HOST_WIDE_INT f = INTVAL (op2); if (t == STORE_FLAG_VALUE && f == 0) code = GET_CODE (op0); else if (t == 0 && f == STORE_FLAG_VALUE) { enum rtx_code tmp; tmp = reversed_comparison_code (op0, NULL_RTX); if (tmp == UNKNOWN) break; code = tmp; } else break; return simplify_gen_relational (code, mode, cmp_mode, XEXP (op0, 0), XEXP (op0, 1)); } if (cmp_mode == VOIDmode) cmp_mode = op0_mode; temp = simplify_relational_operation (GET_CODE (op0), op0_mode, cmp_mode, XEXP (op0, 0), XEXP (op0, 1)); /* See if any simplifications were possible. */ if (temp) { if (GET_CODE (temp) == CONST_INT) return temp == const0_rtx ? op2 : op1; else if (temp) return gen_rtx_IF_THEN_ELSE (mode, temp, op1, op2); } } break; case VEC_MERGE: gcc_assert (GET_MODE (op0) == mode); gcc_assert (GET_MODE (op1) == mode); gcc_assert (VECTOR_MODE_P (mode)); op2 = avoid_constant_pool_reference (op2); if (GET_CODE (op2) == CONST_INT) { int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode)); unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size); int mask = (1 << n_elts) - 1; if (!(INTVAL (op2) & mask)) return op1; if ((INTVAL (op2) & mask) == mask) return op0; op0 = avoid_constant_pool_reference (op0); op1 = avoid_constant_pool_reference (op1); if (GET_CODE (op0) == CONST_VECTOR && GET_CODE (op1) == CONST_VECTOR) { rtvec v = rtvec_alloc (n_elts); unsigned int i; for (i = 0; i < n_elts; i++) RTVEC_ELT (v, i) = (INTVAL (op2) & (1 << i) ? CONST_VECTOR_ELT (op0, i) : CONST_VECTOR_ELT (op1, i)); return gen_rtx_CONST_VECTOR (mode, v); } } break; default: gcc_unreachable (); } return 0; } /* Evaluate a SUBREG of a CONST_INT or CONST_DOUBLE or CONST_VECTOR, returning another CONST_INT or CONST_DOUBLE or CONST_VECTOR. Works by unpacking OP into a collection of 8-bit values represented as a little-endian array of 'unsigned char', selecting by BYTE, and then repacking them again for OUTERMODE. */ static rtx simplify_immed_subreg (enum machine_mode outermode, rtx op, enum machine_mode innermode, unsigned int byte) { /* We support up to 512-bit values (for V8DFmode). */ enum { max_bitsize = 512, value_bit = 8, value_mask = (1 << value_bit) - 1 }; unsigned char value[max_bitsize / value_bit]; int value_start; int i; int elem; int num_elem; rtx * elems; int elem_bitsize; rtx result_s; rtvec result_v = NULL; enum mode_class outer_class; enum machine_mode outer_submode; /* Some ports misuse CCmode. */ if (GET_MODE_CLASS (outermode) == MODE_CC && GET_CODE (op) == CONST_INT) return op; /* We have no way to represent a complex constant at the rtl level. */ if (COMPLEX_MODE_P (outermode)) return NULL_RTX; /* Unpack the value. */ if (GET_CODE (op) == CONST_VECTOR) { num_elem = CONST_VECTOR_NUNITS (op); elems = &CONST_VECTOR_ELT (op, 0); elem_bitsize = GET_MODE_BITSIZE (GET_MODE_INNER (innermode)); } else { num_elem = 1; elems = &op; elem_bitsize = max_bitsize; } /* If this asserts, it is too complicated; reducing value_bit may help. */ gcc_assert (BITS_PER_UNIT % value_bit == 0); /* I don't know how to handle endianness of sub-units. */ gcc_assert (elem_bitsize % BITS_PER_UNIT == 0); for (elem = 0; elem < num_elem; elem++) { unsigned char * vp; rtx el = elems[elem]; /* Vectors are kept in target memory order. (This is probably a mistake.) */ { unsigned byte = (elem * elem_bitsize) / BITS_PER_UNIT; unsigned ibyte = (((num_elem - 1 - elem) * elem_bitsize) / BITS_PER_UNIT); unsigned word_byte = WORDS_BIG_ENDIAN ? ibyte : byte; unsigned subword_byte = BYTES_BIG_ENDIAN ? ibyte : byte; unsigned bytele = (subword_byte % UNITS_PER_WORD + (word_byte / UNITS_PER_WORD) * UNITS_PER_WORD); vp = value + (bytele * BITS_PER_UNIT) / value_bit; } switch (GET_CODE (el)) { case CONST_INT: for (i = 0; i < HOST_BITS_PER_WIDE_INT && i < elem_bitsize; i += value_bit) *vp++ = INTVAL (el) >> i; /* CONST_INTs are always logically sign-extended. */ for (; i < elem_bitsize; i += value_bit) *vp++ = INTVAL (el) < 0 ? -1 : 0; break; case CONST_DOUBLE: if (GET_MODE (el) == VOIDmode) { /* If this triggers, someone should have generated a CONST_INT instead. */ gcc_assert (elem_bitsize > HOST_BITS_PER_WIDE_INT); for (i = 0; i < HOST_BITS_PER_WIDE_INT; i += value_bit) *vp++ = CONST_DOUBLE_LOW (el) >> i; while (i < HOST_BITS_PER_WIDE_INT * 2 && i < elem_bitsize) { *vp++ = CONST_DOUBLE_HIGH (el) >> (i - HOST_BITS_PER_WIDE_INT); i += value_bit; } /* It shouldn't matter what's done here, so fill it with zero. */ for (; i < max_bitsize; i += value_bit) *vp++ = 0; } else { long tmp[max_bitsize / 32]; int bitsize = GET_MODE_BITSIZE (GET_MODE (el)); gcc_assert (GET_MODE_CLASS (GET_MODE (el)) == MODE_FLOAT); gcc_assert (bitsize <= elem_bitsize); gcc_assert (bitsize % value_bit == 0); real_to_target (tmp, CONST_DOUBLE_REAL_VALUE (el), GET_MODE (el)); /* real_to_target produces its result in words affected by FLOAT_WORDS_BIG_ENDIAN. However, we ignore this, and use WORDS_BIG_ENDIAN instead; see the documentation of SUBREG in rtl.texi. */ for (i = 0; i < bitsize; i += value_bit) { int ibase; if (WORDS_BIG_ENDIAN) ibase = bitsize - 1 - i; else ibase = i; *vp++ = tmp[ibase / 32] >> i % 32; } /* It shouldn't matter what's done here, so fill it with zero. */ for (; i < elem_bitsize; i += value_bit) *vp++ = 0; } break; default: gcc_unreachable (); } } /* Now, pick the right byte to start with. */ /* Renumber BYTE so that the least-significant byte is byte 0. A special case is paradoxical SUBREGs, which shouldn't be adjusted since they will already have offset 0. */ if (GET_MODE_SIZE (innermode) >= GET_MODE_SIZE (outermode)) { unsigned ibyte = (GET_MODE_SIZE (innermode) - GET_MODE_SIZE (outermode) - byte); unsigned word_byte = WORDS_BIG_ENDIAN ? ibyte : byte; unsigned subword_byte = BYTES_BIG_ENDIAN ? ibyte : byte; byte = (subword_byte % UNITS_PER_WORD + (word_byte / UNITS_PER_WORD) * UNITS_PER_WORD); } /* BYTE should still be inside OP. (Note that BYTE is unsigned, so if it's become negative it will instead be very large.) */ gcc_assert (byte < GET_MODE_SIZE (innermode)); /* Convert from bytes to chunks of size value_bit. */ value_start = byte * (BITS_PER_UNIT / value_bit); /* Re-pack the value. */ if (VECTOR_MODE_P (outermode)) { num_elem = GET_MODE_NUNITS (outermode); result_v = rtvec_alloc (num_elem); elems = &RTVEC_ELT (result_v, 0); outer_submode = GET_MODE_INNER (outermode); } else { num_elem = 1; elems = &result_s; outer_submode = outermode; } outer_class = GET_MODE_CLASS (outer_submode); elem_bitsize = GET_MODE_BITSIZE (outer_submode); gcc_assert (elem_bitsize % value_bit == 0); gcc_assert (elem_bitsize + value_start * value_bit <= max_bitsize); for (elem = 0; elem < num_elem; elem++) { unsigned char *vp; /* Vectors are stored in target memory order. (This is probably a mistake.) */ { unsigned byte = (elem * elem_bitsize) / BITS_PER_UNIT; unsigned ibyte = (((num_elem - 1 - elem) * elem_bitsize) / BITS_PER_UNIT); unsigned word_byte = WORDS_BIG_ENDIAN ? ibyte : byte; unsigned subword_byte = BYTES_BIG_ENDIAN ? ibyte : byte; unsigned bytele = (subword_byte % UNITS_PER_WORD + (word_byte / UNITS_PER_WORD) * UNITS_PER_WORD); vp = value + value_start + (bytele * BITS_PER_UNIT) / value_bit; } switch (outer_class) { case MODE_INT: case MODE_PARTIAL_INT: { unsigned HOST_WIDE_INT hi = 0, lo = 0; for (i = 0; i < HOST_BITS_PER_WIDE_INT && i < elem_bitsize; i += value_bit) lo |= (HOST_WIDE_INT)(*vp++ & value_mask) << i; for (; i < elem_bitsize; i += value_bit) hi |= ((HOST_WIDE_INT)(*vp++ & value_mask) << (i - HOST_BITS_PER_WIDE_INT)); /* immed_double_const doesn't call trunc_int_for_mode. I don't know why. */ if (elem_bitsize <= HOST_BITS_PER_WIDE_INT) elems[elem] = gen_int_mode (lo, outer_submode); else elems[elem] = immed_double_const (lo, hi, outer_submode); } break; case MODE_FLOAT: { REAL_VALUE_TYPE r; long tmp[max_bitsize / 32]; /* real_from_target wants its input in words affected by FLOAT_WORDS_BIG_ENDIAN. However, we ignore this, and use WORDS_BIG_ENDIAN instead; see the documentation of SUBREG in rtl.texi. */ for (i = 0; i < max_bitsize / 32; i++) tmp[i] = 0; for (i = 0; i < elem_bitsize; i += value_bit) { int ibase; if (WORDS_BIG_ENDIAN) ibase = elem_bitsize - 1 - i; else ibase = i; tmp[ibase / 32] |= (*vp++ & value_mask) << i % 32; } real_from_target (&r, tmp, outer_submode); elems[elem] = CONST_DOUBLE_FROM_REAL_VALUE (r, outer_submode); } break; default: gcc_unreachable (); } } if (VECTOR_MODE_P (outermode)) return gen_rtx_CONST_VECTOR (outermode, result_v); else return result_s; } /* Simplify SUBREG:OUTERMODE(OP:INNERMODE, BYTE) Return 0 if no simplifications are possible. */ rtx simplify_subreg (enum machine_mode outermode, rtx op, enum machine_mode innermode, unsigned int byte) { /* Little bit of sanity checking. */ gcc_assert (innermode != VOIDmode); gcc_assert (outermode != VOIDmode); gcc_assert (innermode != BLKmode); gcc_assert (outermode != BLKmode); gcc_assert (GET_MODE (op) == innermode || GET_MODE (op) == VOIDmode); gcc_assert ((byte % GET_MODE_SIZE (outermode)) == 0); gcc_assert (byte < GET_MODE_SIZE (innermode)); if (outermode == innermode && !byte) return op; if (GET_CODE (op) == CONST_INT || GET_CODE (op) == CONST_DOUBLE || GET_CODE (op) == CONST_VECTOR) return simplify_immed_subreg (outermode, op, innermode, byte); /* Changing mode twice with SUBREG => just change it once, or not at all if changing back op starting mode. */ if (GET_CODE (op) == SUBREG) { enum machine_mode innermostmode = GET_MODE (SUBREG_REG (op)); int final_offset = byte + SUBREG_BYTE (op); rtx newx; if (outermode == innermostmode && byte == 0 && SUBREG_BYTE (op) == 0) return SUBREG_REG (op); /* The SUBREG_BYTE represents offset, as if the value were stored in memory. Irritating exception is paradoxical subreg, where we define SUBREG_BYTE to be 0. On big endian machines, this value should be negative. For a moment, undo this exception. */ if (byte == 0 && GET_MODE_SIZE (innermode) < GET_MODE_SIZE (outermode)) { int difference = (GET_MODE_SIZE (innermode) - GET_MODE_SIZE (outermode)); if (WORDS_BIG_ENDIAN) final_offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD; if (BYTES_BIG_ENDIAN) final_offset += difference % UNITS_PER_WORD; } if (SUBREG_BYTE (op) == 0 && GET_MODE_SIZE (innermostmode) < GET_MODE_SIZE (innermode)) { int difference = (GET_MODE_SIZE (innermostmode) - GET_MODE_SIZE (innermode)); if (WORDS_BIG_ENDIAN) final_offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD; if (BYTES_BIG_ENDIAN) final_offset += difference % UNITS_PER_WORD; } /* See whether resulting subreg will be paradoxical. */ if (GET_MODE_SIZE (innermostmode) > GET_MODE_SIZE (outermode)) { /* In nonparadoxical subregs we can't handle negative offsets. */ if (final_offset < 0) return NULL_RTX; /* Bail out in case resulting subreg would be incorrect. */ if (final_offset % GET_MODE_SIZE (outermode) || (unsigned) final_offset >= GET_MODE_SIZE (innermostmode)) return NULL_RTX; } else { int offset = 0; int difference = (GET_MODE_SIZE (innermostmode) - GET_MODE_SIZE (outermode)); /* In paradoxical subreg, see if we are still looking on lower part. If so, our SUBREG_BYTE will be 0. */ if (WORDS_BIG_ENDIAN) offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD; if (BYTES_BIG_ENDIAN) offset += difference % UNITS_PER_WORD; if (offset == final_offset) final_offset = 0; else return NULL_RTX; } /* Recurse for further possible simplifications. */ newx = simplify_subreg (outermode, SUBREG_REG (op), innermostmode, final_offset); if (newx) return newx; if (validate_subreg (outermode, innermostmode, SUBREG_REG (op), final_offset)) return gen_rtx_SUBREG (outermode, SUBREG_REG (op), final_offset); return NULL_RTX; } /* SUBREG of a hard register => just change the register number and/or mode. If the hard register is not valid in that mode, suppress this simplification. If the hard register is the stack, frame, or argument pointer, leave this as a SUBREG. */ if (REG_P (op) && REGNO (op) < FIRST_PSEUDO_REGISTER #ifdef CANNOT_CHANGE_MODE_CLASS && ! (REG_CANNOT_CHANGE_MODE_P (REGNO (op), innermode, outermode) && GET_MODE_CLASS (innermode) != MODE_COMPLEX_INT && GET_MODE_CLASS (innermode) != MODE_COMPLEX_FLOAT) #endif && ((reload_completed && !frame_pointer_needed) || (REGNO (op) != FRAME_POINTER_REGNUM #if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM && REGNO (op) != HARD_FRAME_POINTER_REGNUM #endif )) #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && REGNO (op) != ARG_POINTER_REGNUM #endif && REGNO (op) != STACK_POINTER_REGNUM && subreg_offset_representable_p (REGNO (op), innermode, byte, outermode)) { unsigned int regno = REGNO (op); unsigned int final_regno = regno + subreg_regno_offset (regno, innermode, byte, outermode); /* ??? We do allow it if the current REG is not valid for its mode. This is a kludge to work around how float/complex arguments are passed on 32-bit SPARC and should be fixed. */ if (HARD_REGNO_MODE_OK (final_regno, outermode) || ! HARD_REGNO_MODE_OK (regno, innermode)) { rtx x = gen_rtx_REG_offset (op, outermode, final_regno, byte); /* Propagate original regno. We don't have any way to specify the offset inside original regno, so do so only for lowpart. The information is used only by alias analysis that can not grog partial register anyway. */ if (subreg_lowpart_offset (outermode, innermode) == byte) ORIGINAL_REGNO (x) = ORIGINAL_REGNO (op); return x; } } /* If we have a SUBREG of a register that we are replacing and we are replacing it with a MEM, make a new MEM and try replacing the SUBREG with it. Don't do this if the MEM has a mode-dependent address or if we would be widening it. */ if (MEM_P (op) && ! mode_dependent_address_p (XEXP (op, 0)) /* Allow splitting of volatile memory references in case we don't have instruction to move the whole thing. */ && (! MEM_VOLATILE_P (op) || ! have_insn_for (SET, innermode)) && GET_MODE_SIZE (outermode) <= GET_MODE_SIZE (GET_MODE (op))) return adjust_address_nv (op, outermode, byte); /* Handle complex values represented as CONCAT of real and imaginary part. */ if (GET_CODE (op) == CONCAT) { unsigned int inner_size, final_offset; rtx part, res; inner_size = GET_MODE_UNIT_SIZE (innermode); part = byte < inner_size ? XEXP (op, 0) : XEXP (op, 1); final_offset = byte % inner_size; if (final_offset + GET_MODE_SIZE (outermode) > inner_size) return NULL_RTX; res = simplify_subreg (outermode, part, GET_MODE (part), final_offset); if (res) return res; if (validate_subreg (outermode, GET_MODE (part), part, final_offset)) return gen_rtx_SUBREG (outermode, part, final_offset); return NULL_RTX; } /* Optimize SUBREG truncations of zero and sign extended values. */ if ((GET_CODE (op) == ZERO_EXTEND || GET_CODE (op) == SIGN_EXTEND) && GET_MODE_BITSIZE (outermode) < GET_MODE_BITSIZE (innermode)) { unsigned int bitpos = subreg_lsb_1 (outermode, innermode, byte); /* If we're requesting the lowpart of a zero or sign extension, there are three possibilities. If the outermode is the same as the origmode, we can omit both the extension and the subreg. If the outermode is not larger than the origmode, we can apply the truncation without the extension. Finally, if the outermode is larger than the origmode, but both are integer modes, we can just extend to the appropriate mode. */ if (bitpos == 0) { enum machine_mode origmode = GET_MODE (XEXP (op, 0)); if (outermode == origmode) return XEXP (op, 0); if (GET_MODE_BITSIZE (outermode) <= GET_MODE_BITSIZE (origmode)) return simplify_gen_subreg (outermode, XEXP (op, 0), origmode, subreg_lowpart_offset (outermode, origmode)); if (SCALAR_INT_MODE_P (outermode)) return simplify_gen_unary (GET_CODE (op), outermode, XEXP (op, 0), origmode); } /* A SUBREG resulting from a zero extension may fold to zero if it extracts higher bits that the ZERO_EXTEND's source bits. */ if (GET_CODE (op) == ZERO_EXTEND && bitpos >= GET_MODE_BITSIZE (GET_MODE (XEXP (op, 0)))) return CONST0_RTX (outermode); } return NULL_RTX; } /* Make a SUBREG operation or equivalent if it folds. */ rtx simplify_gen_subreg (enum machine_mode outermode, rtx op, enum machine_mode innermode, unsigned int byte) { rtx newx; newx = simplify_subreg (outermode, op, innermode, byte); if (newx) return newx; if (GET_CODE (op) == SUBREG || GET_CODE (op) == CONCAT || GET_MODE (op) == VOIDmode) return NULL_RTX; if (validate_subreg (outermode, innermode, op, byte)) return gen_rtx_SUBREG (outermode, op, byte); return NULL_RTX; } /* Simplify X, an rtx expression. Return the simplified expression or NULL if no simplifications were possible. This is the preferred entry point into the simplification routines; however, we still allow passes to call the more specific routines. Right now GCC has three (yes, three) major bodies of RTL simplification code that need to be unified. 1. fold_rtx in cse.c. This code uses various CSE specific information to aid in RTL simplification. 2. simplify_rtx in combine.c. Similar to fold_rtx, except that it uses combine specific information to aid in RTL simplification. 3. The routines in this file. Long term we want to only have one body of simplification code; to get to that state I recommend the following steps: 1. Pour over fold_rtx & simplify_rtx and move any simplifications which are not pass dependent state into these routines. 2. As code is moved by #1, change fold_rtx & simplify_rtx to use this routine whenever possible. 3. Allow for pass dependent state to be provided to these routines and add simplifications based on the pass dependent state. Remove code from cse.c & combine.c that becomes redundant/dead. It will take time, but ultimately the compiler will be easier to maintain and improve. It's totally silly that when we add a simplification that it needs to be added to 4 places (3 for RTL simplification and 1 for tree simplification. */ rtx simplify_rtx (rtx x) { enum rtx_code code = GET_CODE (x); enum machine_mode mode = GET_MODE (x); switch (GET_RTX_CLASS (code)) { case RTX_UNARY: return simplify_unary_operation (code, mode, XEXP (x, 0), GET_MODE (XEXP (x, 0))); case RTX_COMM_ARITH: if (swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1))) return simplify_gen_binary (code, mode, XEXP (x, 1), XEXP (x, 0)); /* Fall through.... */ case RTX_BIN_ARITH: return simplify_binary_operation (code, mode, XEXP (x, 0), XEXP (x, 1)); case RTX_TERNARY: case RTX_BITFIELD_OPS: return simplify_ternary_operation (code, mode, GET_MODE (XEXP (x, 0)), XEXP (x, 0), XEXP (x, 1), XEXP (x, 2)); case RTX_COMPARE: case RTX_COMM_COMPARE: return simplify_relational_operation (code, mode, ((GET_MODE (XEXP (x, 0)) != VOIDmode) ? GET_MODE (XEXP (x, 0)) : GET_MODE (XEXP (x, 1))), XEXP (x, 0), XEXP (x, 1)); case RTX_EXTRA: if (code == SUBREG) return simplify_gen_subreg (mode, SUBREG_REG (x), GET_MODE (SUBREG_REG (x)), SUBREG_BYTE (x)); break; case RTX_OBJ: if (code == LO_SUM) { /* Convert (lo_sum (high FOO) FOO) to FOO. */ if (GET_CODE (XEXP (x, 0)) == HIGH && rtx_equal_p (XEXP (XEXP (x, 0), 0), XEXP (x, 1))) return XEXP (x, 1); } break; default: break; } return NULL; }