Initial revision

1 files changed, 379 insertions, 0 deletions

diff --git a/gdb/i386-linux-nat.c b/gdb/i386-linux-nat.c
new file mode 100644
index 00000000000..8c63a9414d9
--- /dev/null
+++ b/gdb/i386-linux-nat.c
@@ -0,0 +1,379 @@
+/* Native-dependent code for Linux running on i386's, for GDB.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+
+/* For i386_linux_skip_solib_resolver */
+#include "symtab.h"
+#include "frame.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+#include <sys/ptrace.h>
+#include <sys/user.h>
+#include <sys/procfs.h>
+
+#ifdef HAVE_SYS_REG_H
+#include <sys/reg.h>
+#endif
+
+/* This is a duplicate of the table in i386-xdep.c. */
+
+static int regmap[] = 
+{
+  EAX, ECX, EDX, EBX,
+  UESP, EBP, ESI, EDI,
+  EIP, EFL, CS, SS,
+  DS, ES, FS, GS,
+};
+
+
+/*  FIXME:  These routine absolutely depends upon (NUM_REGS - NUM_FREGS)
+    being less than or equal to the number of registers that can be stored
+    in a gregset_t.  Note that with the current scheme there will typically
+    be more registers actually stored in a gregset_t that what we know
+    about.  This is bogus and should be fixed. */
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+
+  for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regmap[regi]));
+    }
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+
+  for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regmap[regi]) = *(int *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+}
+
+
+/*  Given a pointer to a floating point register set in (fpregset_t *)
+    format, unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  char *from;
+  from = (char *) &(fpregsetp->st_space[0]);
+  for (regi = FPSTART_REGNUM ; regi <= FPEND_REGNUM ; regi++)
+    {
+      supply_register(regi, from);
+      from += REGISTER_RAW_SIZE(regi);
+    }
+}
+
+/*  Given a pointer to a floating point register set in (fpregset_t *)
+    format, update all of the registers from gdb's idea
+    of the current floating point register set. */
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  char *to;
+  char *from;
+
+  to = (char *) &(fpregsetp->st_space[0]);
+  for (regi = FPSTART_REGNUM ; regi <= FPEND_REGNUM ; regi++)
+    {
+      from = (char *) &registers[REGISTER_BYTE (regi)];
+      memcpy (to, from, REGISTER_RAW_SIZE (regi));
+      to += REGISTER_RAW_SIZE(regi);
+    }
+}
+
+/*
+  Get the whole floating point state of the process and
+  store the floating point stack into registers[].
+  */
+static void
+fetch_fpregs(void)
+{
+  int ret, regno;
+  char buf[FPREG_BYTES];
+
+  ret = ptrace (PTRACE_GETFPREGS, inferior_pid,	0, (int)buf);
+  if ( ret < 0 )
+    {
+      warning ("Couldn't get floating point status");
+      return;
+    }
+
+  for ( regno = 0; regno < NUM_FREGS; regno++ )
+    {
+      if ( regno < 7 )
+	supply_register (NUM_REGS-NUM_FREGS+regno, buf + regno*4);
+      else
+	supply_register (NUM_REGS-NUM_FREGS+regno,
+			 buf + FPENV_BYTES + (regno-7)*FPREG_RAW_SIZE);
+    }
+
+}
+
+
+/*
+  Get the whole floating point state of the process and
+  replace the contents from registers[].
+  */
+static void
+store_fpregs(void)
+{
+  int ret, regno;
+  char buf[FPREG_BYTES];
+
+  ret = ptrace (PTRACE_GETFPREGS, inferior_pid,	0, (int)buf);
+  if ( ret < 0 )
+    {
+      warning ("Couldn't get floating point status");
+      return;
+    }
+
+  for ( regno = 0; regno < NUM_FREGS; regno++ )
+    {
+      if ( register_valid[regno] )
+	{
+	  if ( regno < 7 )
+	    {
+	      read_register_gen (NUM_REGS-NUM_FREGS+regno,
+				 buf + regno*4);
+	    }
+	  else
+	    {
+	      read_register_gen (NUM_REGS-NUM_FREGS+regno,
+				 buf + FPENV_BYTES + (regno-7)*FPREG_RAW_SIZE);
+	    }
+	}
+    }
+
+  ret = ptrace (PTRACE_SETFPREGS, inferior_pid, 0, (int)buf);
+  if ( ret < 0 )
+    {
+      warning ("Couldn't write floating point status");
+      return;
+    }
+
+}
+
+
+/*
+  Get state of all non-fp registers of the process and
+  store into registers[].
+  */
+static void
+fetch_regs(void)
+{
+  int ret, regno;
+  char buf[17*sizeof(unsigned int)];
+
+  ret = ptrace (PTRACE_GETREGS, inferior_pid, 0, (int)buf);
+  if ( ret < 0 )
+    {
+      warning ("Couldn't get registers");
+      return;
+    }
+
+  for ( regno = 0; regno < NUM_REGS-NUM_FREGS; regno++ )
+    supply_register (regno, buf + register_addr (regno, U_REGS_OFFSET));
+
+}
+
+
+/*
+  Get the whole non-floating-point register state of the process and
+  replace them in the process from registers[].
+  */
+static void
+store_regs(void)
+{
+  int ret, regno;
+  char buf[17*sizeof(unsigned int)];
+
+  ret = ptrace (PTRACE_GETREGS, inferior_pid, 0, (int)buf);
+  if ( ret < 0 )
+    {
+      warning ("Couldn't get registers");
+      return;
+    }
+
+  for ( regno = 0; regno < NUM_REGS-NUM_FREGS; regno++ )
+    {
+      if ( register_valid[regno] )
+	read_register_gen (regno, buf + register_addr (regno, U_REGS_OFFSET));
+    }
+
+  ret = ptrace (PTRACE_SETREGS, inferior_pid, 0, (int)buf);
+
+  if ( ret < 0 )
+    {
+      warning ("Couldn't write floating point status");
+      return;
+    }
+
+}
+
+
+/* Fetch registers from the child process.
+   Fetch all if regno == -1, otherwise fetch all ordinary
+   registers or all floating point registers depending
+   upon the value of regno. */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if ( (regno < NUM_REGS - NUM_FREGS) || (regno == -1) )
+    fetch_regs();
+
+  if ( (regno >= NUM_REGS - NUM_FREGS) || (regno == -1) )
+    fetch_fpregs();
+}
+
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register, which
+   then determines whether we store all ordinary
+   registers or all of the floating point registers. */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  if ( (regno < NUM_REGS - NUM_FREGS) || (regno == -1) )
+    store_regs();
+
+  if ( (regno >= NUM_REGS - NUM_FREGS) || (regno == -1) )
+    store_fpregs();
+}
+
+
+/* Find the minimal symbol named NAME, and return both the minsym
+   struct and its objfile.  This probably ought to be in minsym.c, but
+   everything there is trying to deal with things like C++ and
+   SOFUN_ADDRESS_MAYBE_TURQUOISE, ...  Since this is so simple, it may
+   be considered too special-purpose for general consumption.  */
+
+static struct minimal_symbol *
+find_minsym_and_objfile (char *name, struct objfile **objfile_p)
+{
+  struct objfile *objfile;
+
+  ALL_OBJFILES (objfile)
+    {
+      struct minimal_symbol *msym;
+
+      ALL_OBJFILE_MSYMBOLS (objfile, msym)
+	{
+	  if (SYMBOL_NAME (msym)
+	      && STREQ (SYMBOL_NAME (msym), name))
+	    {
+	      *objfile_p = objfile;
+	      return msym;
+	    }
+	}
+    }
+
+  return 0;
+}
+
+
+static CORE_ADDR
+skip_hurd_resolver (CORE_ADDR pc)
+{
+  /* The HURD dynamic linker is part of the GNU C library, so many
+     GNU/Linux distributions use it.  (All ELF versions, as far as I
+     know.)  An unresolved PLT entry points to "_dl_runtime_resolve",
+     which calls "fixup" to patch the PLT, and then passes control to
+     the function.
+
+     We look for the symbol `_dl_runtime_resolve', and find `fixup' in
+     the same objfile.  If we are at the entry point of `fixup', then
+     we set a breakpoint at the return address (at the top of the
+     stack), and continue.
+  
+     It's kind of gross to do all these checks every time we're
+     called, since they don't change once the executable has gotten
+     started.  But this is only a temporary hack --- upcoming versions
+     of Linux will provide a portable, efficient interface for
+     debugging programs that use shared libraries.  */
+
+  struct objfile *objfile;
+  struct minimal_symbol *resolver 
+    = find_minsym_and_objfile ("_dl_runtime_resolve", &objfile);
+
+  if (resolver)
+    {
+      struct minimal_symbol *fixup
+	= lookup_minimal_symbol ("fixup", 0, objfile);
+
+      if (fixup && SYMBOL_VALUE_ADDRESS (fixup) == pc)
+	return (SAVED_PC_AFTER_CALL (get_current_frame ()));
+    }
+
+  return 0;
+}      
+
+
+/* See the comments for SKIP_SOLIB_RESOLVER at the top of infrun.c.
+   This function:
+   1) decides whether a PLT has sent us into the linker to resolve
+      a function reference, and 
+   2) if so, tells us where to set a temporary breakpoint that will
+      trigger when the dynamic linker is done.  */
+
+CORE_ADDR
+i386_linux_skip_solib_resolver (CORE_ADDR pc)
+{
+  CORE_ADDR result;
+
+  /* Plug in functions for other kinds of resolvers here.  */
+  result = skip_hurd_resolver (pc);
+  if (result)
+    return result;
+
+  return 0;
+}