2003-01-30 Andrew Cagney <ac131313@redhat.com>

	* Makefile.in (mon960-rom.o): Delete rule.
	* mon960-rom.c: Delete file.

1 files changed, 0 insertions, 261 deletions

diff --git a/gdb/mon960-rom.c b/gdb/mon960-rom.c
deleted file mode 100644
index 46f5784ed7c..00000000000
--- a/gdb/mon960-rom.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/* Remote target glue for the Intel 960 MON960 ROM monitor.
-   Copyright 1995, 1996, 1997, 1998, 1999, 2000
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-
-#include "defs.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "monitor.h"
-#include "serial.h"
-#include "srec.h"
-#include "xmodem.h"
-#include "symtab.h"
-#include "symfile.h"		/* for generic_load */
-#include "inferior.h"		/* for write_pc() */
-#include "gdb_string.h"
-
-#define USE_GENERIC_LOAD
-
-static struct target_ops mon960_ops;
-
-static void mon960_open (char *args, int from_tty);
-
-#ifdef USE_GENERIC_LOAD
-
-static void
-mon960_load_gen (char *filename, int from_tty)
-{
-  generic_load (filename, from_tty);
-  /* Finally, make the PC point at the start address */
-  if (exec_bfd)
-    write_pc (bfd_get_start_address (exec_bfd));
-
-  inferior_ptid = null_ptid;		/* No process now */
-}
-
-#else
-
-static void
-mon960_load (struct serial *desc, char *file, int hashmark)
-{
-  bfd *abfd;
-  asection *s;
-  char *buffer;
-  int i;
-
-  buffer = alloca (XMODEM_PACKETSIZE);
-  abfd = bfd_openr (file, 0);
-  if (!abfd)
-    {
-      printf_filtered ("Unable to open file %s\n", file);
-      return;
-    }
-  if (bfd_check_format (abfd, bfd_object) == 0)
-    {
-      printf_filtered ("File is not an object file\n");
-      return;
-    }
-  for (s = abfd->sections; s; s = s->next)
-    if (s->flags & SEC_LOAD)
-      {
-	bfd_size_type section_size;
-	printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma,
-			 s->vma + s->_raw_size);
-	gdb_flush (gdb_stdout);
-	monitor_printf (current_monitor->load, s->vma);
-	if (current_monitor->loadresp)
-	  monitor_expect (current_monitor->loadresp, NULL, 0);
-	xmodem_init_xfer (desc);
-	section_size = bfd_section_size (abfd, s);
-	for (i = 0; i < section_size; i += XMODEM_DATASIZE)
-	  {
-	    int numbytes;
-	    numbytes = min (XMODEM_DATASIZE, section_size - i);
-	    bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i,
-				      numbytes);
-	    xmodem_send_packet (desc, buffer, numbytes, hashmark);
-	    if (hashmark)
-	      {
-		putchar_unfiltered ('#');
-		gdb_flush (gdb_stdout);
-	      }
-	  }			/* Per-packet (or S-record) loop */
-	xmodem_finish_xfer (desc);
-	monitor_expect_prompt (NULL, 0);
-	putchar_unfiltered ('\n');
-      }				/* Loadable sections */
-  if (hashmark)
-    putchar_unfiltered ('\n');
-}
-
-#endif /* USE_GENERIC_LOAD */
-
-/* This array of registers need to match the indexes used by GDB.
-   This exists because the various ROM monitors use different strings
-   than does GDB, and don't necessarily support all the registers
-   either. So, typing "info reg sp" becomes a "r30".  */
-
-/* these correspond to the offsets from tm-* files from config directories */
-/* g0-g14, fp, pfp, sp, rip,r3-15, pc, ac, tc, fp0-3 */
-/* NOTE: "ip" is documented as "ir" in the Mon960 UG. */
-/* NOTE: "ir" can't be accessed... but there's an ip and rip. */
-static char *full_regnames[NUM_REGS] =
-{
-  /*  0 */ "pfp", "sp", "rip", "r3", "r4", "r5", "r6", "r7",
-  /*  8 */ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
-  /* 16 */ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",
-  /* 24 */ "g8", "g9", "g10", "g11", "g12", "g13", "g14", "fp",
-  /* 32 */ "pc", "ac", "tc", "ip", "fp0", "fp1", "fp2", "fp3",
-};
-
-static char *mon960_regnames[NUM_REGS];
-
-/* Define the monitor command strings. Since these are passed directly
-   through to a printf style function, we may include formatting
-   strings. We also need a CR or LF on the end.  */
-
-/* need to pause the monitor for timing reasons, so slow it down */
-
-#if 0
-/* FIXME: this extremely long init string causes MON960 to return two NAKS
-   instead of performing the autobaud recognition, at least when gdb
-   is running on GNU/Linux.  The short string below works on Linux, and on
-   SunOS using a tcp serial connection.  Must retest on SunOS using a
-   direct serial connection; if that works, get rid of the long string. */
-static char *mon960_inits[] =
-{"\n\r\r\r\r\r\r\r\r\r\r\r\r\r\r\n\r\n\r\n", NULL};
-#else
-static char *mon960_inits[] =
-{"\r", NULL};
-#endif
-
-static struct monitor_ops mon960_cmds;
-
-static void
-init_mon960_cmds (void)
-{
-  mon960_cmds.flags = MO_CLR_BREAK_USES_ADDR
-    | MO_NO_ECHO_ON_OPEN | MO_SEND_BREAK_ON_STOP | MO_GETMEM_READ_SINGLE;	/* flags */
-  mon960_cmds.init = mon960_inits;	/* Init strings */
-  mon960_cmds.cont = "go\n\r";	/* continue command */
-  mon960_cmds.step = "st\n\r";	/* single step */
-  mon960_cmds.stop = NULL;	/* break interrupts the program */
-  mon960_cmds.set_break = NULL;	/* set a breakpoint */
-  mon960_cmds.clr_break =	/* can't use "br" because only 2 hw bps are supported */
-    mon960_cmds.clr_all_break = NULL;	/* clear a breakpoint - "de" is for hw bps */
-  NULL,				/* clear all breakpoints */
-    mon960_cmds.fill = NULL;	/* fill (start end val) */
-  /* can't use "fi" because it takes words, not bytes */
-  /* can't use "mb", "md" or "mo" because they require interaction */
-  mon960_cmds.setmem.cmdb = NULL;	/* setmem.cmdb (addr, value) */
-  mon960_cmds.setmem.cmdw = NULL;	/* setmem.cmdw (addr, value) */
-  mon960_cmds.setmem.cmdl = "md %x %x\n\r";	/* setmem.cmdl (addr, value) */
-  mon960_cmds.setmem.cmdll = NULL;	/* setmem.cmdll (addr, value) */
-  mon960_cmds.setmem.resp_delim = NULL;		/* setmem.resp_delim */
-  mon960_cmds.setmem.term = NULL;	/* setmem.term */
-  mon960_cmds.setmem.term_cmd = NULL;	/* setmem.term_cmd */
-  /* since the parsing of multiple bytes is difficult due to
-     interspersed addresses, we'll only read 1 value at a time,
-     even tho these can handle a count */
-  mon960_cmds.getmem.cmdb = "db %x\n\r";	/* getmem.cmdb (addr, #bytes) */
-  mon960_cmds.getmem.cmdw = "ds %x\n\r";	/* getmem.cmdw (addr, #swords) */
-  mon960_cmds.getmem.cmdl = "di %x\n\r";	/* getmem.cmdl (addr, #words) */
-  mon960_cmds.getmem.cmdll = "dd %x\n\r";	/* getmem.cmdll (addr, #dwords) */
-  mon960_cmds.getmem.resp_delim = " : ";	/* getmem.resp_delim */
-  mon960_cmds.getmem.term = NULL;	/* getmem.term */
-  mon960_cmds.getmem.term_cmd = NULL;	/* getmem.term_cmd */
-  mon960_cmds.setreg.cmd = "md %s %x\n\r";	/* setreg.cmd (name, value) */
-  mon960_cmds.setreg.resp_delim = NULL;		/* setreg.resp_delim */
-  mon960_cmds.setreg.term = NULL;	/* setreg.term */
-  mon960_cmds.setreg.term_cmd = NULL,	/* setreg.term_cmd */
-    mon960_cmds.getreg.cmd = "di %s\n\r";	/* getreg.cmd (name) */
-  mon960_cmds.getreg.resp_delim = " : ";	/* getreg.resp_delim */
-  mon960_cmds.getreg.term = NULL;	/* getreg.term */
-  mon960_cmds.getreg.term_cmd = NULL;	/* getreg.term_cmd */
-  mon960_cmds.dump_registers = "re\n\r";	/* dump_registers */
-  mon960_cmds.register_pattern = "\\(\\w+\\)=\\([0-9a-fA-F]+\\)";	/* register_pattern */
-  mon960_cmds.supply_register = NULL;	/* supply_register */
-#ifdef USE_GENERIC_LOAD
-  mon960_cmds.load_routine = NULL;	/* load_routine (defaults to SRECs) */
-  mon960_cmds.load = NULL;	/* download command */
-  mon960_cmds.loadresp = NULL;	/* load response */
-#else
-  mon960_cmds.load_routine = mon960_load;	/* load_routine (defaults to SRECs) */
-  mon960_cmds.load = "do\n\r";	/* download command */
-  mon960_cmds.loadresp = "Downloading\n\r";	/* load response */
-#endif
-  mon960_cmds.prompt = "=>";	/* monitor command prompt */
-  mon960_cmds.line_term = "\n\r";	/* end-of-command delimitor */
-  mon960_cmds.cmd_end = NULL;	/* optional command terminator */
-  mon960_cmds.target = &mon960_ops;	/* target operations */
-  mon960_cmds.stopbits = SERIAL_1_STOPBITS;	/* number of stop bits */
-  mon960_cmds.regnames = mon960_regnames;	/* registers names */
-  mon960_cmds.magic = MONITOR_OPS_MAGIC;	/* magic */
-};
-
-static void
-mon960_open (char *args, int from_tty)
-{
-  char buf[64];
-
-  monitor_open (args, &mon960_cmds, from_tty);
-
-  /* Attempt to fetch the value of the first floating point register (fp0).
-     If the monitor returns a string containing the word "Bad" we'll assume
-     this processor has no floating point registers, and nullify the 
-     regnames entries that refer to FP registers.  */
-
-  monitor_printf (mon960_cmds.getreg.cmd, full_regnames[FP0_REGNUM]);	/* di fp0 */
-  if (monitor_expect_prompt (buf, sizeof (buf)) != -1)
-    if (strstr (buf, "Bad") != NULL)
-      {
-	int i;
-
-	for (i = FP0_REGNUM; i < FP0_REGNUM + 4; i++)
-	  mon960_regnames[i] = NULL;
-      }
-}
-
-void
-_initialize_mon960 (void)
-{
-  memcpy (mon960_regnames, full_regnames, sizeof (full_regnames));
-
-  init_mon960_cmds ();
-
-  init_monitor_ops (&mon960_ops);
-
-  mon960_ops.to_shortname = "mon960";	/* for the target command */
-  mon960_ops.to_longname = "Intel 960 MON960 monitor";
-#ifdef USE_GENERIC_LOAD
-  mon960_ops.to_load = mon960_load_gen;		/* FIXME - should go back and try "do" */
-#endif
-  /* use SW breaks; target only supports 2 HW breakpoints */
-  mon960_ops.to_insert_breakpoint = memory_insert_breakpoint;
-  mon960_ops.to_remove_breakpoint = memory_remove_breakpoint;
-
-  mon960_ops.to_doc =
-    "Use an Intel 960 board running the MON960 debug monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).";
-
-  mon960_ops.to_open = mon960_open;
-  add_target (&mon960_ops);
-}