* Makefile.in (LIBGNU, INCGNU): Define.

	(INTERNAL_CFLAGS_BASE): Add INCGNU.
	(INTERNAL_LIBS, CLIBS, CDEPS): Add LIBGNU.
	(CLEANDIRS): New.
	($(LIBGNU), all-lib): New rules.
	(clean, distclean, do-maintainer-clean): Use CLEANDIRS.
	* configure.ac: Use gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE.
	Simplify AC_CONFIG_AUX_DIR.  Generate gnulib/Makefile.
	* gnulib: New directory, from gnulib-tool.
	* configure, aclocal.m4: Regenerated.

	* Makefile.in (LIBOBJS): New.
	(OBS): Use LIBOBJS.
	(memmem.o): New rule.
	* configure.ac: Use AC_CONFIG_LIBOBJ_DIR and check for memmem.
	* configure: Regenerated.

9 files changed, 1721 insertions, 38 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index ff652faf20d..30230d22e0b 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,18 @@
 2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>
 
+	* Makefile.in (LIBGNU, INCGNU): Define.
+	(INTERNAL_CFLAGS_BASE): Add INCGNU.
+	(INTERNAL_LIBS, CLIBS, CDEPS): Add LIBGNU.
+	(CLEANDIRS): New.
+	($(LIBGNU), all-lib): New rules.
+	(clean, distclean, do-maintainer-clean): Use CLEANDIRS.
+	* configure.ac: Use gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE.
+	Simplify AC_CONFIG_AUX_DIR.  Generate gnulib/Makefile.
+	* gnulib: New directory, from gnulib-tool.
+	* configure, aclocal.m4: Regenerated.
+
+2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>
+
 	* linux-thread-db.c (have_threads_callback): Check thread->private.
 
 2008-04-13  Nick Roberts  <nickrob@snap.net.nz>
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index a2a9d4b81ae..6dc2de6379b 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -160,6 +160,10 @@ LIBICONV = @LIBICONV@
 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 
+# Helper code from gnulib.
+LIBGNU = gnulib/libgnu.a
+INCGNU = -I$(srcdir)/gnulib -Ignulib
+
 #
 # CLI sub directory definitons
 #
@@ -364,7 +368,7 @@ INTERNAL_CFLAGS_BASE = \
 	$(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 	$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 	$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
-	$(INTL_CFLAGS) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
+	$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 
@@ -388,13 +392,13 @@ INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_
 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 	$(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
-	-lintl -liberty
+	-lintl -liberty $(LIBGNU)
 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 	$(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 	$(LIBICONV) $(LIBEXPAT) \
-	$(LIBIBERTY) $(WIN32LIBS)
+	$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
-	$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS)
+	$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 
 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
@@ -1077,6 +1081,7 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 TSOBS = inflow.o
 
 SUBDIRS = @subdirs@
+CLEANDIRS = $(SUBDIRS) gnulib
 
 # For now, shortcut the "configure GDB for fewer languages" stuff.
 YYFILES = c-exp.c \
@@ -1329,6 +1334,12 @@ $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
 		-o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
 		$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
 
+# Convenience rule to handle recursion.
+$(LIBGNU): all-lib
+all-lib:
+	@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
+.PHONY: all-lib
+
 # Create a library of the gdb object files and build GDB by linking
 # against that.
 #
@@ -1368,7 +1379,7 @@ TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
 tags: TAGS
 
 clean mostlyclean: $(CONFIG_CLEAN)
-	@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
+	@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
 	rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
 	rm -f init.c version.c
 	rm -f gdb$(EXEEXT) core make.log
@@ -1387,7 +1398,7 @@ clean-tui:
 # NB: While GDBSERVER might be configured on native systems, it isn't
 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
 distclean: clean
-	@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
+	@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
 	rm -f gdbserver/config.status gdbserver/config.log
 	rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
 	rm -f gdbserver/Makefile gdbserver/config.cache
@@ -1414,7 +1425,7 @@ local-maintainer-clean:
 	rm -f nm.h config.status
 
 do-maintainer-clean:
-	@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" \
+	@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
 		subdir_do
 
 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
diff --git a/gdb/aclocal.m4 b/gdb/aclocal.m4
index 89a8eac08d3..a93606763fa 100644
--- a/gdb/aclocal.m4
+++ b/gdb/aclocal.m4
@@ -11,6 +11,78 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
 # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
@@ -44,6 +116,379 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $1 | $1:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
@@ -73,4 +518,363 @@ AC_DEFUN([AM_MAINTAINER_MODE],
 
 AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
 
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake.  There are at least two reasons why we must not
+# use `-m 0755':
+#   - it causes special bits like SGID to be ignored,
+#   - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out.  Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
 m4_include([acinclude.m4])
diff --git a/gdb/configure b/gdb/configure
index b4930c46d92..505634dd7c1 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -313,7 +313,7 @@ ac_includes_default="\
 ac_subdirs_all="$ac_subdirs_all gdbtk"
 ac_subdirs_all="$ac_subdirs_all multi-ice"
 ac_subdirs_all="$ac_subdirs_all gdbserver"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT localedir PACKAGE subdirs TARGET_OBS AWK INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S RANLIB ac_ct_RANLIB YACC AR ac_ct_AR DLLTOOL ac_ct_DLLTOOL WINDRES ac_ct_WINDRES MIG ac_ct_MIG READLINE READLINE_DEPS READLINE_CFLAGS HAVE_LIBEXPAT LIBEXPAT LTLIBEXPAT ALLOCA CONFIG_LDFLAGS TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS WERROR_CFLAGS SER_HARDWIRE WIN32LIBS LIBGUI GUI_CFLAGS_X WIN32LDAPP TCL_VERSION TCL_MAJOR_VERSION TCL_MINOR_VERSION TCL_CC TCL_DEFS TCL_SHLIB_CFLAGS TCL_SHLIB_LD TCL_SHLIB_LD_LIBS TCL_SHLIB_SUFFIX TCL_DL_LIBS TCL_LD_FLAGS TCL_LD_SEARCH_FLAGS TCL_CC_SEARCH_FLAGS TCL_COMPAT_OBJS TCL_RANLIB TCL_BUILD_LIB_SPEC TCL_LIB_SPEC TCL_LIB_VERSIONS_OK TK_VERSION TK_DEFS TK_BUILD_INCLUDES TK_XINCLUDES TK_XLIBSW TK_BUILD_LIB_SPEC TK_LIB_SPEC TCLHDIR TKHDIR ITCLHDIR ITKHDIR ITCL_VERSION ITCL_DEFS ITCL_BUILD_INCLUDES ITCL_BUILD_LIB_SPEC ITCL_LIB_SPEC ITK_VERSION ITK_DEFS ITK_BUILD_INCLUDES ITK_BUILD_LIB_SPEC ITK_LIB_SPEC X_CFLAGS X_LDFLAGS X_LIBS TCL_DEPS TK_DEPS ITCLLIB ITCL_DEPS ITKLIB ITK_DEPS GDBTKLIBS GDBTK_CFLAGS GDBTK_SRC_DIR SIM SIM_OBS ENABLE_CFLAGS PROFILE_CFLAGS CONFIG_OBS CONFIG_DEPS CONFIG_SRCS CONFIG_ALL CONFIG_CLEAN CONFIG_INSTALL CONFIG_UNINSTALL target_subdir frags nm_h LIBICONV LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT localedir PACKAGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE subdirs TARGET_OBS LN_S RANLIB ac_ct_RANLIB YACC AR ac_ct_AR DLLTOOL ac_ct_DLLTOOL WINDRES ac_ct_WINDRES MIG ac_ct_MIG READLINE READLINE_DEPS READLINE_CFLAGS HAVE_LIBEXPAT LIBEXPAT LTLIBEXPAT ALLOCA CONFIG_LDFLAGS TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS WERROR_CFLAGS SER_HARDWIRE WIN32LIBS LIBGUI GUI_CFLAGS_X WIN32LDAPP TCL_VERSION TCL_MAJOR_VERSION TCL_MINOR_VERSION TCL_CC TCL_DEFS TCL_SHLIB_CFLAGS TCL_SHLIB_LD TCL_SHLIB_LD_LIBS TCL_SHLIB_SUFFIX TCL_DL_LIBS TCL_LD_FLAGS TCL_LD_SEARCH_FLAGS TCL_CC_SEARCH_FLAGS TCL_COMPAT_OBJS TCL_RANLIB TCL_BUILD_LIB_SPEC TCL_LIB_SPEC TCL_LIB_VERSIONS_OK TK_VERSION TK_DEFS TK_BUILD_INCLUDES TK_XINCLUDES TK_XLIBSW TK_BUILD_LIB_SPEC TK_LIB_SPEC TCLHDIR TKHDIR ITCLHDIR ITKHDIR ITCL_VERSION ITCL_DEFS ITCL_BUILD_INCLUDES ITCL_BUILD_LIB_SPEC ITCL_LIB_SPEC ITK_VERSION ITK_DEFS ITK_BUILD_INCLUDES ITK_BUILD_LIB_SPEC ITK_LIB_SPEC X_CFLAGS X_LDFLAGS X_LIBS TCL_DEPS TK_DEPS ITCLLIB ITCL_DEPS ITKLIB ITK_DEPS GDBTKLIBS GDBTK_CFLAGS GDBTK_SRC_DIR SIM SIM_OBS ENABLE_CFLAGS PROFILE_CFLAGS CONFIG_OBS CONFIG_DEPS CONFIG_SRCS CONFIG_ALL CONFIG_CLEAN CONFIG_INSTALL CONFIG_UNINSTALL target_subdir frags nm_h LIBICONV LIBOBJS LTLIBOBJS'
 ac_subst_files='host_makefile_frag'
 
 # Initialize some variables set by options.
@@ -860,6 +860,8 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
   --enable-targets        alternative target configurations
   --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
   --disable-gdbcli        disable command-line interface (CLI)
@@ -2713,6 +2715,7 @@ if test "$ac_cv_search_strerror" != no; then
 
 fi
 
+gl_EARLY
 
 
 
@@ -2826,7 +2829,7 @@ esac
 
 
 ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
+for ac_dir in .. $srcdir/..; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -2842,8 +2845,8 @@ for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/.. $srcdir/\`cd $srcdir;pwd\`/.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/.. $srcdir/\`cd $srcdir;pwd\`/.." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in .. $srcdir/.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in .. $srcdir/.." >&2;}
    { (exit 1); exit 1; }; }
 fi
 ac_config_guess="$SHELL $ac_aux_dir/config.guess"
@@ -3027,6 +3030,8 @@ if test x"$USE_NLS" = xyes; then
    CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
 fi
 
+gl_INIT
+
 PACKAGE=gdb
 
 cat >>confdefs.h <<_ACEOF
@@ -3035,6 +3040,586 @@ _ACEOF
 
 
 
+# GDB does not use automake, but gnulib does.  This line lets us
+# generate its Makefile.in.
+am__api_version="1.9"
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=gdb
+ VERSION=UNUSED-VERSION
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
 debugdir=${libdir}/debug
 
 
@@ -3864,20 +4449,6 @@ _ACEOF
 
 fi
 
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
-
 # The CLI cannot be disabled yet, but may be in the future.
 
 # Enable CLI.
@@ -24803,7 +25374,7 @@ _ACEOF
 
 
 
-                    ac_config_files="$ac_config_files Makefile .gdbinit:gdbinit.in"
+                              ac_config_files="$ac_config_files Makefile .gdbinit:gdbinit.in gnulib/Makefile"
           ac_config_commands="$ac_config_commands default"
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -24903,6 +25474,20 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -25339,6 +25924,7 @@ cat >>$CONFIG_STATUS <<_ACEOF
 # INIT-COMMANDS section.
 #
 
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 GCC="$GCC"
 CC="$CC"
@@ -25373,7 +25959,9 @@ do
   # Handling of arguments.
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
   ".gdbinit" ) CONFIG_FILES="$CONFIG_FILES .gdbinit:gdbinit.in" ;;
+  "gnulib/Makefile" ) CONFIG_FILES="$CONFIG_FILES gnulib/Makefile" ;;
   "$ac_config_links_1" ) CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
   "gdb_stdint.h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS gdb_stdint.h" ;;
   "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
   "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
@@ -25501,12 +26089,38 @@ s,@GENCAT@,$GENCAT,;t t
 s,@CATOBJEXT@,$CATOBJEXT,;t t
 s,@localedir@,$localedir,;t t
 s,@PACKAGE@,$PACKAGE,;t t
-s,@subdirs@,$subdirs,;t t
-s,@TARGET_OBS@,$TARGET_OBS,;t t
-s,@AWK@,$AWK,;t t
 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@subdirs@,$subdirs,;t t
+s,@TARGET_OBS@,$TARGET_OBS,;t t
 s,@LN_S@,$LN_S,;t t
 s,@RANLIB@,$RANLIB,;t t
 s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
@@ -26065,6 +26679,28 @@ echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
     cat $tmp/config.h
     rm -f $tmp/config.h
   fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $ac_file | $ac_file:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X$ac_file : 'X\(//\)[^/]' \| \
+	 X$ac_file : 'X\(//\)$' \| \
+	 X$ac_file : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
 done
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -26319,6 +26955,91 @@ esac
   { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
 echo "$as_me: executing $ac_dest commands" >&6;}
   case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
     gdb_stdint.h )
 if test "$GCC" = yes; then
   echo "/* generated for " `$CC --version | sed 1q` "*/" > tmp-stdint.h
diff --git a/gdb/configure.ac b/gdb/configure.ac
index fcc35136a8e..43aa2dd0928 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -1,6 +1,6 @@
 dnl Autoconf configure script for GDB, the GNU debugger.
 dnl Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-dnl 2005, 2006
+dnl 2005, 2006, 2007, 2008
 dnl Free Software Foundation, Inc.
 dnl
 dnl This file is part of GDB.
@@ -29,9 +29,10 @@ AC_PROG_CC
 AC_GNU_SOURCE
 AC_AIX
 AC_ISC_POSIX
+gl_EARLY
 AM_PROG_CC_STDC
 
-AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
+AC_CONFIG_AUX_DIR(..)
 AC_CANONICAL_SYSTEM
 
 dnl List of object files and targets accumulated by configure.
@@ -59,10 +60,16 @@ if test x"$USE_NLS" = xyes; then
    CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
 fi
 
+gl_INIT
+
 PACKAGE=gdb
 AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
 AC_SUBST(PACKAGE)
 
+# GDB does not use automake, but gnulib does.  This line lets us
+# generate its Makefile.in.
+AM_INIT_AUTOMAKE(gdb, UNUSED-VERSION, [no-define])
+
 debugdir=${libdir}/debug
 	 
 AC_ARG_WITH(separate-debug-dir,
@@ -207,8 +214,6 @@ if test "x$targ_defvec" != x; then
     [Define to BFD's default target vector. ])
 fi
 
-AC_ARG_PROGRAM
-
 # The CLI cannot be disabled yet, but may be in the future.
 
 # Enable CLI.
@@ -1721,7 +1726,7 @@ AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "ISO-8859-1",
 
 AM_ICONV
 
-AC_OUTPUT(Makefile .gdbinit:gdbinit.in,
+AC_OUTPUT(Makefile .gdbinit:gdbinit.in gnulib/Makefile,
 [
 dnl Autoconf doesn't provide a mechanism for modifying definitions 
 dnl provided by makefile fragments.
diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog
index 1a8689520a2..c3aaeb521de 100644
--- a/gdb/gdbserver/ChangeLog
+++ b/gdb/gdbserver/ChangeLog
@@ -1,3 +1,11 @@
+2008-04-14  Daniel Jacobowitz  <dan@codesourcery.com>
+
+	* Makefile.in (LIBOBJS): New.
+	(OBS): Use LIBOBJS.
+	(memmem.o): New rule.
+	* configure.ac: Use AC_CONFIG_LIBOBJ_DIR and check for memmem.
+	* configure: Regenerated.
+
 2008-04-04  Ulrich Weigand  <uweigand@de.ibm.com>
 
 	* server.c (handle_query): Never return "unsupported" for
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index 322ad0c40af..1bdd7b7ff79 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -136,6 +136,8 @@ SFILES=	$(srcdir)/gdbreplay.c $(srcdir)/inferiors.c \
 
 DEPFILES = @GDBSERVER_DEPFILES@
 
+LIBOBJS = @LIBOBJS@
+
 SOURCES = $(SFILES)
 TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} 
 
@@ -143,7 +145,7 @@ OBS = inferiors.o regcache.o remote-utils.o server.o signals.o target.o \
 	utils.o version.o \
 	mem-break.o hostio.o \
 	$(XML_BUILTIN) \
-	$(DEPFILES)
+	$(DEPFILES) $(LIBOBJS)
 GDBSERVER_LIBS = @GDBSERVER_LIBS@
 XM_CLIBS = @LIBS@
 
@@ -289,6 +291,9 @@ utils.o: utils.c $(server_h)
 signals.o: ../signals/signals.c $(server_h)
 	$(CC) -c $(CPPFLAGS) $(INTERNAL_CFLAGS) $< -DGDBSERVER
 
+memmem.o: ../gnulib/memmem.c
+	$(CC) -o memmem.o -c $(CPPFLAGS) $(INTERNAL_CFLAGS) $<
+
 i387-fp.o: i387-fp.c $(server_h)
 
 linux_low_h = $(srcdir)/linux-low.h
diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure
index 58a0885c9bf..0b45c4749a5 100755
--- a/gdb/gdbserver/configure
+++ b/gdb/gdbserver/configure
@@ -272,6 +272,7 @@ PACKAGE_STRING=
 PACKAGE_BUGREPORT=
 
 ac_unique_file="server.c"
+ac_config_libobj_dir=../gnulib
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
@@ -309,7 +310,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CPP EGREP RDYNAMIC GDBSERVER_DEPFILES GDBSERVER_LIBS USE_THREAD_DB srv_xmlbuiltin srv_xmlfiles LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CPP EGREP LIBOBJS RDYNAMIC GDBSERVER_DEPFILES GDBSERVER_LIBS USE_THREAD_DB srv_xmlbuiltin srv_xmlfiles LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -1297,6 +1298,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
           ac_config_headers="$ac_config_headers config.h:config.in"
 
 
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3203,6 +3205,118 @@ fi
 done
 
 
+for ac_func in memmem
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"
+			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_var=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  case $LIBOBJS in
+    "$ac_func.$ac_objext"   | \
+  *" $ac_func.$ac_objext"   | \
+    "$ac_func.$ac_objext "* | \
+  *" $ac_func.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;;
+esac
+
+fi
+done
+
+
+
 have_errno=no
 echo "$as_me:$LINENO: checking for errno" >&5
 echo $ECHO_N "checking for errno... $ECHO_C" >&6
@@ -4951,13 +5065,13 @@ s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
 s,@CPP@,$CPP,;t t
 s,@EGREP@,$EGREP,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
 s,@RDYNAMIC@,$RDYNAMIC,;t t
 s,@GDBSERVER_DEPFILES@,$GDBSERVER_DEPFILES,;t t
 s,@GDBSERVER_LIBS@,$GDBSERVER_LIBS,;t t
 s,@USE_THREAD_DB@,$USE_THREAD_DB,;t t
 s,@srv_xmlbuiltin@,$srv_xmlbuiltin,;t t
 s,@srv_xmlfiles@,$srv_xmlfiles,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
 CEOF
 
diff --git a/gdb/gdbserver/configure.ac b/gdb/gdbserver/configure.ac
index 33131add3bd..8ae5d06fd55 100644
--- a/gdb/gdbserver/configure.ac
+++ b/gdb/gdbserver/configure.ac
@@ -1,5 +1,5 @@
 dnl Autoconf configure script for GDB server.
-dnl Copyright (C) 2000, 2002, 2003, 2004, 2005, 2006
+dnl Copyright (C) 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 dnl Free Software Foundation, Inc.
 dnl
 dnl This file is part of GDB.
@@ -23,6 +23,7 @@ AC_PREREQ(2.59)dnl
 
 AC_INIT(server.c)
 AC_CONFIG_HEADER(config.h:config.in)
+AC_CONFIG_LIBOBJ_DIR(../gnulib)
 
 AC_PROG_CC
 AC_GNU_SOURCE
@@ -42,6 +43,7 @@ AC_CHECK_HEADERS(sgtty.h termio.h termios.h sys/reg.h string.h dnl
 		 sys/ioctl.h netinet/in.h sys/socket.h netdb.h dnl
 		 netinet/tcp.h arpa/inet.h sys/wait.h)
 AC_CHECK_FUNCS(pread pwrite pread64)
+AC_REPLACE_FUNCS(memmem)
 
 have_errno=no
 AC_MSG_CHECKING(for errno)