gdb/ChangeLog:

2004-08-25  Jim Blandy  <jimb@redhat.com>

	Merge changes from trunk:

	2004-08-09  Jim Blandy  <jimb@redhat.com>

	* rs6000-tdep.c (set_sim_regno, init_sim_regno_table,
	rs6000_register_sim_regno): Doc fixes.

	2004-08-04  Jim Blandy  <jimb@redhat.com>

	* ppc-linux-nat.c (fetch_register): Replace 'gdb_assert (0)' with
	a call to 'internal_error', with a more helpful error message.
	* rs6000-tdep.c (e500_pseudo_register_read,
	e500_pseudo_register_write, rs6000_store_return_value): Same.

	Change the layout of the PowerPC E500 raw register cache to allow
	the lower 32-bit halves of the GPRS to be their own raw registers,
	not pseudoregisters.
	* ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag;
	add ppc_ev0_upper_regnum flag.
	* rs6000-tdep.c: #include "reggroups.h".
	(spe_register_p): Recognize the ev upper half registers as SPE
	registers.
	(init_sim_regno_table): Build gdb->sim mappings for the upper-half
	registers.
	(e500_move_ev_register): New function.
	(e500_pseudo_register_read, e500_pseudo_register_write): The 'ev'
	vector registers are the pseudo-registers now, formed by splicing
	together the gprs and the upper-half registers.
	(e500_register_reggroup_p): New function.
	(P): Macro deleted.
	(P8, A4): New macro.
	(PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted.
	(PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New
	macros.
	(registers_e500): Rearrange register set so that the raw register
	set contains 32-bit GPRs and upper-half registers, and the SPE
	vector registers become pseudo-registers.
	(rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p;
	it has been deleted.  Initialize ppc_ev0_upper_regnum.  Many other
	register numbers are now the same for the E500 as they are for
	other PowerPC variants.  Register e500_register_reggroup_p as the
	register group function for the E500.
	* Makefile.in (rs6000-tdep.o): Update dependencies.

	Adapt PPC E500 native support to the new raw regcache layout.
	* ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes.
	(read_spliced_spe_reg, write_spliced_spe_reg): Deleted.
	(fetch_spe_register, store_spe_register): Handle fetching/storing
	all the SPE registers at once, if regno == -1.  These now take
	over the job of fetch_spe_registers and store_spe_registers.
	(fetch_spe_registers, store_spe_registers): Deleted.
	(fetch_ppc_registers, store_ppc_registers): Fetch/store gprs
	unconditionally; they're always raw.  Fetch/store SPE upper half
	registers, if present, instead of ev registers.
	(fetch_register, store_register): Remove sanity checks: gprs are
	never pseudo-registers now, so we never need to even mention any
	registers that are ever pseudoregisters.

	Use a fixed register numbering when communicating with the PowerPC
	simulator.
	* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
	* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
	(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
	New functions.
	(rs6000_gdbarch_init): Register rs6000_register_sim_regno.  Call
	init_sim_regno_table.
	* Makefile.in (gdb_sim_ppc_h): New variable.
	(rs6000-tdep.o): Update dependencies.

	2004-08-02  Andrew Cagney  <cagney@gnu.org>

	Replace DEPRECATED_REGISTER_RAW_SIZE with register_size.
	* rs6000-tdep.c (rs6000_push_dummy_call)
	(rs6000_extract_return_value): Use register_size.
	...
	* ppc-linux-nat.c (fetch_altivec_register, fetch_register)
	(supply_vrregset, store_altivec_register, fill_vrregset): Ditto.

	2004-07-20  Jim Blandy  <jimb@redhat.com>

	* rs6000-tdep.c (rs6000_gdbarch_init): The register set used for
	bfd_mach_ppc has no segment registers.

	Include PowerPC SPR numbers for special-purpose registers.
	* rs6000-tdep.c (struct reg): Add new member, 'spr_num'.
	(R, R4, R8, R16, F, P, R32, R64, R0): Include value for
	new member in initializer.
	(S, S4, SN4, S64): New macros for defining special-purpose
	registers.
	(PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS, PPC_OEA_SPRS, registers_power,
	registers_403, registers_403GC, registers_505, registers_860,
	registers_601, registers_602, registers_603, registers_604,
	registers_750, registers_e500): Use them.

	* rs6000-tdep.c (rs6000_gdbarch_init): Delete variable 'power';
	replace references with expression used to initialize variable.

	2004-07-16  Jim Blandy  <jimb@redhat.com>

	* ppc-tdep.h (ppc_spr_asr): Add missing OEA SPR.
        (ppc_spr_mi_dbcam, ppc_spr_mi_dbram0, ppc_spr_mi_dbram1)
	(ppc_spr_md_cam, ppc_spr_md_ram0, ppc_spr_md_ram1): Add
	missing MPC823 SPRs.
	(ppc_spr_m_twb): Renamed from ppc_spr_md_twb; the old name was
	incorrect.  (This was corrected in GDB's register name tables on
	2004-07-14.)

	* rs6000-tdep.c (registers_602): Correct register name: "esassr"
	should be "esasrr" ("ESA Save and Restore Register").

	2004-07-15  Jim Blandy  <jimb@redhat.com>

	* ppc-tdep.h (struct gdbarch_tdep): New member: ppc_sr0_regnum.
	* rs6000-tdep.c (rs6000_gdbarch_init): Initialize it.

	2004-07-14  Jim Blandy  <jimb@redhat.com>

	* rs6000-tdep.c (COMMON_UISA_NOFP_REGS): Delete; unused.

	* ppc-tdep.h (ppc_num_vrs): New enum constant.

	* ppc-tdep.h (ppc_num_srs): New enum constant.

	* ppc-tdep.h (ppc_spr_mq, ppc_spr_xer, ppc_spr_rtcu, ppc_spr_rtcl)
	(ppc_spr_lr, ppc_spr_ctr, ppc_spr_cnt, ppc_spr_dsisr, ppc_spr_dar)
	(ppc_spr_dec, ppc_spr_sdr1, ppc_spr_srr0, ppc_spr_srr1)
	(ppc_spr_eie, ppc_spr_eid, ppc_spr_nri, ppc_spr_sp, ppc_spr_cmpa)
	(ppc_spr_cmpb, ppc_spr_cmpc, ppc_spr_cmpd, ppc_spr_icr)
	(ppc_spr_der, ppc_spr_counta, ppc_spr_countb, ppc_spr_cmpe)
	(ppc_spr_cmpf, ppc_spr_cmpg, ppc_spr_cmph, ppc_spr_lctrl1)
	(ppc_spr_lctrl2, ppc_spr_ictrl, ppc_spr_bar, ppc_spr_vrsave)
	(ppc_spr_sprg0, ppc_spr_sprg1, ppc_spr_sprg2, ppc_spr_sprg3)
	(ppc_spr_ear, ppc_spr_tbl, ppc_spr_tbu, ppc_spr_pvr)
	(ppc_spr_spefscr, ppc_spr_ibat0u, ppc_spr_ibat0l, ppc_spr_ibat1u)
	(ppc_spr_ibat1l, ppc_spr_ibat2u, ppc_spr_ibat2l, ppc_spr_ibat3u)
	(ppc_spr_ibat3l, ppc_spr_dbat0u, ppc_spr_dbat0l, ppc_spr_dbat1u)
	(ppc_spr_dbat1l, ppc_spr_dbat2u, ppc_spr_dbat2l, ppc_spr_dbat3u)
	(ppc_spr_dbat3l, ppc_spr_ic_cst, ppc_spr_ic_adr, ppc_spr_ic_dat)
	(ppc_spr_dc_cst, ppc_spr_dc_adr, ppc_spr_dc_dat, ppc_spr_dpdr)
	(ppc_spr_dpir, ppc_spr_immr, ppc_spr_mi_ctr, ppc_spr_mi_ap)
	(ppc_spr_mi_epn, ppc_spr_mi_twc, ppc_spr_mi_rpn, ppc_spr_mi_cam)
	(ppc_spr_mi_ram0, ppc_spr_mi_ram1, ppc_spr_md_ctr, ppc_spr_m_casid)
	(ppc_spr_md_ap, ppc_spr_md_epn, ppc_spr_md_twb, ppc_spr_md_twc)
	(ppc_spr_md_rpn, ppc_spr_m_tw, ppc_spr_md_dbcam, ppc_spr_md_dbram0)
	(ppc_spr_md_dbram1, ppc_spr_ummcr0, ppc_spr_upmc1, ppc_spr_upmc2)
	(ppc_spr_usia, ppc_spr_ummcr1, ppc_spr_upmc3, ppc_spr_upmc4)
	(ppc_spr_zpr, ppc_spr_pid, ppc_spr_mmcr0, ppc_spr_pmc1)
	(ppc_spr_sgr, ppc_spr_pmc2, ppc_spr_dcwr, ppc_spr_sia)
	(ppc_spr_mmcr1, ppc_spr_pmc3, ppc_spr_pmc4, ppc_spr_sda)
	(ppc_spr_tbhu, ppc_spr_tblu, ppc_spr_dmiss, ppc_spr_dcmp)
	(ppc_spr_hash1, ppc_spr_hash2, ppc_spr_icdbdr, ppc_spr_imiss)
	(ppc_spr_esr, ppc_spr_icmp, ppc_spr_dear, ppc_spr_rpa)
	(ppc_spr_evpr, ppc_spr_cdbcr, ppc_spr_tsr, ppc_spr_602_tcr)
	(ppc_spr_403_tcr, ppc_spr_ibr, ppc_spr_pit, ppc_spr_esasrr)
	(ppc_spr_tbhi, ppc_spr_tblo, ppc_spr_srr2, ppc_spr_sebr)
	(ppc_spr_srr3, ppc_spr_ser, ppc_spr_hid0, ppc_spr_dbsr)
	(ppc_spr_hid1, ppc_spr_iabr, ppc_spr_dbcr, ppc_spr_iac1)
	(ppc_spr_dabr, ppc_spr_iac2, ppc_spr_dac1, ppc_spr_dac2)
	(ppc_spr_l2cr, ppc_spr_dccr, ppc_spr_ictc, ppc_spr_iccr)
	(ppc_spr_thrm1, ppc_spr_pbl1, ppc_spr_thrm2, ppc_spr_pbu1)
	(ppc_spr_thrm3, ppc_spr_pbl2, ppc_spr_fpecr, ppc_spr_lt)
	(ppc_spr_pir, ppc_spr_pbu2): New enum constants for PowerPC
	special-purpose register numbers.

	* rs6000-tdep.c (registers_860): Correct register name.  (No PPC
	manual mentions 'md_twb', but many mention 'm_twb', and at that
	point in the register list.)

include/gdb/ChangeLog:
2004-08-04  Andrew Cagney  <cagney@gnu.org>

	* sim-ppc.h: Add extern "C" wrapper.
	(enum sim_ppc_regnum): Add full list of SPRs.

2004-08-04  Jim Blandy  <jimb@redhat.com>

	* sim-ppc.h: New file.

sim/ppc/ChangeLog:
2004-08-04  Andrew Cagney  <cagney@gnu.org>
	    Jim Blandy <jimb@redhat.com>

	* sim_callbacks.h (simulator): Declare.
	* Makefile.in (gdb-sim.o): New rule.
	(MAIN_SRC, GDB_OBJ): Add gdb-sim.o, gdb-sim.c.
	(DEFS_H): Delete.
	(GDB_SIM_PPC_H): Define.
	* gdb-sim.c: New file.
	* sim_calls.c: Do not include "defs.h".
	(simulator): Drop static.
	(sim_store_register, sim_fetch_register): Delete.

1 files changed, 0 insertions, 824 deletions

diff --git a/ltcf-c.sh b/ltcf-c.sh
deleted file mode 100644
index d60a3baa19b..00000000000
--- a/ltcf-c.sh
+++ /dev/null
@@ -1,824 +0,0 @@
-#### This script is meant to be sourced by ltconfig.
-
-# ltcf-c.sh - Create a C compiler specific configuration
-#
-# Copyright (C) 1996-2000, 2001 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='main(){return(0);}'
-
-## Linker Characteristics
-case $host_os in
-cygwin* | mingw*)
-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
-  # When not using gcc, we currently assume that we are using
-  # Microsoft Visual C++.
-  if test "$with_gcc" != yes; then
-    with_gnu_ld=no
-  fi
-  ;;
-
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
-  # If archive_cmds runs LD, not CC, wlarc should be empty
-  wlarc='${wl}'
-
-  # See if GNU ld supports shared libraries.
-  case $host_os in
-  aix3* | aix4* | aix5*)
-    # On AIX/PPC, the GNU linker is very broken
-    if test "$host_cpu" != ia64; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-
-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-    # that the semantics of dynamic libraries on AmigaOS, at least up
-    # to version 4, is to share data among multiple programs linked
-    # with the same dynamic library.  Since this doesn't match the
-    # behavior of shared libraries on other platforms, we can use
-    # them.
-    ld_shlibs=no
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  cygwin* | mingw*)
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec='-L$libdir'
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-
-    extract_expsyms_cmds='test -f $output_objdir/impgen.c || \
-      sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/impgen.c~
-      test -f $output_objdir/impgen.exe || (cd $output_objdir && \
-      if test "x$BUILD_CC" != "x" ; then $BUILD_CC -o impgen impgen.c ; \
-      else $CC -o impgen impgen.c ; fi)~
-      $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def'
-
-    old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib'
-
-    # cygwin and mingw dlls have different entry points and sets of symbols
-    # to exclude.
-    # FIXME: what about values for MSVC?
-    dll_entry=__cygwin_dll_entry@12
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~
-    case $host_os in
-    mingw*)
-      # mingw values
-      dll_entry=_DllMainCRTStartup@12
-      dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~
-      ;;
-    esac
-
-    # mingw and cygwin differ, and it's simplest to just exclude the union
-    # of the two symbol sets.
-    dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12
-
-    # recent cygwin and mingw systems supply a stub DllMain which the user
-    # can override, but on older systems we have to supply one (in ltdll.c)
-    if test "x$lt_cv_need_dllmain" = "xyes"; then
-      ltdll_obj='$output_objdir/$soname-ltdll.'"$objext "
-      ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $output_objdir/$soname-ltdll.c~
-	test -f $output_objdir/$soname-ltdll.$objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
-    else
-      ltdll_obj=
-      ltdll_cmds=
-    fi
-
-    # Extract the symbol export list from an `--export-all' def file,
-    # then regenerate the def file from the symbol export list, so that
-    # the compiled dll only exports the symbol export list.
-    # Be careful not to strip the DATA tag left be newer dlltools.
-    export_symbols_cmds="$ltdll_cmds"'
-      $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
-      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
-
-    # If the export-symbols file already is a .def file (1st line
-    # is EXPORTS), use it as is.
-    # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
-        cp $export_symbols $output_objdir/$soname-def;
-      else
-        echo EXPORTS > $output_objdir/$soname-def;
-        _lt_hint=1;
-        cat $export_symbols | while read symbol; do
-         set dummy \$symbol;
-         case \[$]# in
-           2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
-           *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
-         esac;
-         _lt_hint=`expr 1 + \$_lt_hint`;
-        done;
-      fi~
-      '"$ltdll_cmds"'
-      $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~
-      $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~
-      $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags'
-    ;;
-
-  darwin* | rhapsody*)
-    allow_undefined_flag='-undefined suppress'
-    archive_cmds='$CC `test .$module = .yes && echo -bundle || echo -dynamiclib` $allow_undefined_flag -o $lib $libobjs $deplibs $linkopts -install_name $rpath/$soname `test -n "$verstring" -a x$verstring != x0.0 && echo $verstring`'
-    # We need to add '_' to the symbols in $export_symbols first
-    #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    whole_archive_flag_spec='-all_load $convenience'
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-      wlarc=
-    else
-      archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    fi
-    ;;
-
-  solaris* | sysv5*)
-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
-      ld_shlibs=no
-      cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    wlarc=
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-    else
-      ld_shlibs=no
-    fi
-    ;;
-  esac
-
-  if test "$ld_shlibs" = yes; then
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    case $host_os in
-    cygwin* | mingw*)
-      # dlltool doesn't understand --whole-archive et. al.
-      whole_archive_flag_spec=
-      ;;
-    *)
-      # ancient GNU ld didn't support --whole-archive et. al.
-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-	whole_archive_flag_spec=
-      fi
-      ;;
-    esac
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case $host_os in
-  aix3*)
-    allow_undefined_flag=unsupported
-    always_export_symbols=yes
-    archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4* | aix5*)
-    hardcode_direct=yes
-    hardcode_libdir_separator=':'
-    link_all_deplibs=yes
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-    if test "$with_gcc" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-        collect2name=`${CC} -print-prog-name=collect2`
-        if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-        then
-	  # We have reworked collect2
-	  hardcode_direct=yes
-        else
-	  # We have old collect2
-	  hardcode_direct=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L=yes
-	  hardcode_libdir_flag_spec='-L$libdir'
-	  hardcode_libdir_separator=
-        fi
-      esac
-      shared_flag='-shared'
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-        shared_flag='${wl}-G'
-      else
-        shared_flag='${wl}-bM:SRE'
-      fi
-    fi
-
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      if test $with_gnu_ld = no; then
-        exp_sym_flag='-Bexport'
-        no_entry_flag=""
-      fi
-    else
-      # Test if we are trying to use run time linking, or normal AIX style linking.
-      # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
-      aix_use_runtimelinking=no
-      for ld_flag in $LDFLAGS; do
-        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
-          aix_use_runtimelinking=yes
-          break
-        fi
-      done
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-    # -bexpall does not export symbols beginning with underscore (_)
-    always_export_symbols=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other run time loading flags (-brtl), -berok will
-      #           link without error, but may produce a broken library.
-      allow_undefined_flag=' ${wl}-berok'
-      hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-      archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-    else
-      if test "$host_cpu" = ia64; then
-        if test $with_gnu_ld = no; then
-          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-          allow_undefined_flag="-z nodefs"
-          archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
-        fi
-      else
-        allow_undefined_flag=' ${wl}-berok'
-        # -bexpall does not export symbols beginning with underscore (_)
-        always_export_symbols=yes
-        # Exported symbols can be pulled into shared objects from archives
-        whole_archive_flag_spec=' '
-        build_libtool_need_lc=yes
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
-        # This is similar to how AIX traditionally builds it's shared libraries.
-        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    # see comment about different semantics on the GNU ld section
-    ld_shlibs=no
-    ;;
-
-  cygwin* | mingw*)
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    # hardcode_libdir_flag_spec is actually meaningless, as there is
-    # no search path for DLLs.
-    hardcode_libdir_flag_spec=' '
-    allow_undefined_flag=unsupported
-    # Tell ltmain to make .lib files, not .a files.
-    libext=lib
-    # FIXME: Setting linknames here is a bad hack.
-    archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-    # The linker will automatically build a .lib file if we build a DLL.
-    old_archive_from_new_cmds='true'
-    # FIXME: Should let the user specify the lib program.
-    old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
-    fix_srcfile_path='`cygpath -w "$srcfile"`'
-    ;;
-
-  freebsd1*)
-    ld_shlibs=no
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-  freebsd*)
-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9* | hpux10* | hpux11*)
-    case "$host_cpu" in
-    ia64*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir' ;;
-    *)
-      if test $with_gcc = yes; then
-        case "$host_os" in
-        hpux9*) archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-        *) archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;;
-        esac
-      else
-        case $host_os in
-        hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;;
-        *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;;
-        esac
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_minus_L=yes # Not in the search PATH, but as the default
-			   # location of the library.
-      ;;
-    esac
-    export_dynamic_flag_spec='${wl}-E'
-    hardcode_direct=yes
-    ;;
-
-  irix5* | irix6*)
-    if test "$with_gcc" = yes; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-    else
-      archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    link_all_deplibs=yes
-    ;;
-
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-    else
-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  newsos6)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
-    hardcode_direct=yes
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-    ;;
-
-  osf3*)
-    if test "$with_gcc" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-    fi
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  osf4* | osf5*)	# as osf3* with the addition of -msym flag
-    if test "$with_gcc" = yes; then
-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    else
-      allow_undefined_flag=' -expect_unresolved \*'
-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
-      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-      $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
-
-      # cc supports -rpath directly
-      hardcode_libdir_flag_spec='-rpath $libdir'
-    fi
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    runpath_var=LD_RUN_PATH
-    hardcode_runpath_var=yes
-    ;;
-
-  solaris*)
-    no_undefined_flag=' -z defs'
-    if test "$with_gcc" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-                  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-    else
-      archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    fi
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-    case $host_os in
-    solaris2.[0-5] | solaris2.[0-5].*) ;;
-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
-    esac
-    link_all_deplibs=yes
-    ;;
-
-  sunos4*)
-    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-    ;;
-
-  sysv4.3*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_shlibpath_var=no
-    export_dynamic_flag_spec='-Bexport'
-    ;;
-
-  sysv5*)
-    no_undefined_flag=' -z text'
-    # $CC -shared without GNU ld will not create a library from C++
-    # object files and a static libstdc++, better avoid it by now
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-    hardcode_libdir_flag_spec=
-    hardcode_shlibpath_var=no
-    runpath_var='LD_RUN_PATH'
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  dgux*)
-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_shlibpath_var=no
-    ;;
-
-  sysv4*MP*)
-    if test -d /usr/nec; then
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      runpath_var=LD_RUN_PATH
-      hardcode_runpath_var=yes
-      ld_shlibs=yes
-    fi
-    ;;
-
-  sysv4.2uw2*)
-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-    hardcode_direct=yes
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    hardcode_runpath_var=yes
-    runpath_var=LD_RUN_PATH
-    ;;
-
-  sysv5uw7* | unixware7*)
-    no_undefined_flag='${wl}-z ${wl}text'
-    if test "$GCC" = yes; then
-      archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    else
-      archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-    fi
-    runpath_var='LD_RUN_PATH'
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    ;;
-  esac
-fi
-
-## Compiler Characteristics: PIC flags, static flags, etc
-if test "X${ac_cv_prog_cc_pic+set}" = Xset; then
-  :
-else
-  ac_cv_prog_cc_pic=
-  ac_cv_prog_cc_shlib=
-  ac_cv_prog_cc_wl=
-  ac_cv_prog_cc_static=
-  ac_cv_prog_cc_no_builtin=
-  ac_cv_prog_cc_can_build_shared=$can_build_shared
-
-  if test "$with_gcc" = yes; then
-    ac_cv_prog_cc_wl='-Wl,'
-    ac_cv_prog_cc_static='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-        # AIX 5 now supports IA64 processor
-        lt_cv_prog_cc_static='-Bstatic'
-      else
-        lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      ac_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      ac_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_cv_prog_cc_pic='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      ac_cv_prog_cc_pic=
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	 ac_cv_prog_cc_pic=-Kconform_pic
-      fi
-      ;;
-    *)
-      ac_cv_prog_cc_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for PIC flags for the system compiler.
-    case $host_os in
-    aix*)
-     # All AIX code is PIC.
-      ac_cv_prog_cc_static="$ac_cv_prog_cc_static ${ac_cv_prog_cc_wl}-lC"
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      # Is there a better ac_cv_prog_cc_static that works with the bundled CC?
-      ac_cv_prog_cc_wl='-Wl,'
-      ac_cv_prog_cc_static="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
-      ac_cv_prog_cc_pic='+Z'
-      ;;
-
-    irix5* | irix6*)
-      ac_cv_prog_cc_wl='-Wl,'
-      ac_cv_prog_cc_static='-non_shared'
-      # PIC (with -KPIC) is the default.
-      ;;
-
-    cygwin* | mingw* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      ac_cv_prog_cc_pic='-DDLL_EXPORT'
-      ;;
-
-    newsos6)
-      ac_cv_prog_cc_pic='-KPIC'
-      ac_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      # All OSF/1 code is PIC.
-      ac_cv_prog_cc_wl='-Wl,'
-      ac_cv_prog_cc_static='-non_shared'
-      ;;
-
-    sco3.2v5*)
-      ac_cv_prog_cc_pic='-Kpic'
-      ac_cv_prog_cc_static='-dn'
-      ac_cv_prog_cc_shlib='-belf'
-      ;;
-
-    solaris*)
-      ac_cv_prog_cc_pic='-KPIC'
-      ac_cv_prog_cc_static='-Bstatic'
-      ac_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    sunos4*)
-      ac_cv_prog_cc_pic='-PIC'
-      ac_cv_prog_cc_static='-Bstatic'
-      ac_cv_prog_cc_wl='-Qoption ld '
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-      ac_cv_prog_cc_pic='-KPIC'
-      ac_cv_prog_cc_static='-Bstatic'
-      ac_cv_prog_cc_wl='-Wl,'
-      ;;
-
-    uts4*)
-      ac_cv_prog_cc_pic='-pic'
-      ac_cv_prog_cc_static='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	ac_cv_prog_cc_pic='-Kconform_pic'
-	ac_cv_prog_cc_static='-Bstatic'
-      fi
-      ;;
-
-    *)
-      ac_cv_prog_cc_can_build_shared=no
-      ;;
-    esac
-  fi
-  case "$host_os" in
-      # Platforms which do not suport PIC and -DPIC is meaningless
-      # on them:
-      *djgpp*)
-        ac_cv_prog_cc_pic=
-        ;;
-      *)
-        ac_cv_prog_cc_pic="$ac_cv_prog_cc_pic -DPIC"
-        ;;
-  esac
-fi
-
-need_lc=yes
-if test "$enable_shared" = yes && test "$with_gcc" = yes; then
-  case $archive_cmds in
-  *'~'*)
-    # FIXME: we may have to deal with multi-command sequences.
-    ;;
-  '$CC '*)
-    # Test whether the compiler implicitly links with -lc since on some
-    # systems, -lgcc has to come before -lc. If gcc already passes -lc
-    # to ld, don't add -lc before -lgcc.
-    echo $ac_n "checking whether -lc should be explicitly linked in... $ac_c" 1>&6
-    if eval "test \"`echo '$''{'ac_cv_archive_cmds_needs_lc'+set}'`\" = set"; then
-      echo $ac_n "(cached) $ac_c" 1>&6
-      need_lc=$ac_cv_archive_cmds_needs_lc
-    else
-      $rm conftest*
-      echo "static int dummy;" > conftest.$ac_ext
-      if { (eval echo ltcf-c.sh:need_lc: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
-	# Append any warnings to the config.log.
-	cat conftest.err 1>&5
-	soname=conftest
-	lib=conftest
-	libobjs=conftest.$objext
-	deplibs=
-	wl=$ac_cv_prog_cc_wl
-	compiler_flags=-v
-	linker_flags=-v
-	verstring=
-	output_objdir=.
-	libname=conftest
-	save_allow_undefined_flag=$allow_undefined_flag
-	allow_undefined_flag=
-	if { (eval echo ltcf-c.sh:need_lc: \"$archive_cmds\") 1>&5; (eval $archive_cmds) 2>&1 | grep " -lc " 1>&5 ; }; then
-	  need_lc=no
-	fi
-	allow_undefined_flag=$save_allow_undefined_flag
-      else
-	cat conftest.err 1>&5
-      fi
-    fi
-    $rm conftest*
-    echo "$ac_t$need_lc" 1>&6
-    ;;
-  esac
-fi
-ac_cv_archive_cmds_needs_lc=$need_lc