Initial revision

10 files changed, 8251 insertions, 0 deletions

diff --git a/sim/mn10200/ChangeLog b/sim/mn10200/ChangeLog
new file mode 100644
index 00000000000..ce38f139e4a
--- /dev/null
+++ b/sim/mn10200/ChangeLog
@@ -0,0 +1,424 @@
+Wed Jun 17 11:37:59 1998  Mark Alexander  <marka@cygnus.com>
+
+	* Makefile.in: Define NL_TARGET so that targ-vals.h will be used
+	instead of syscall.h.
+	* simops.c: Use targ-vals.h instead of syscall.h.
+
+Tue Apr 28 18:33:31 1998  Geoffrey Noer  <noer@cygnus.com>
+
+        * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Apr 26 15:31:55 1998  Tom Tromey  <tromey@creche>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Sun Apr 26 15:19:58 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* acconfig.h: New file.
+	* configure.in: Reverted change of Apr 24; use sinclude again.
+
+Fri Apr 24 14:16:40 1998  Tom Tromey  <tromey@creche>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Fri Apr 24 11:19:13 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* configure.in: Don't call sinclude.
+
+Thu Apr 23 09:48:14 1998  Tom Tromey  <tromey@creche>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Apr  4 20:36:25 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Mar 27 16:15:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 25 12:35:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 18 12:38:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Feb 17 12:46:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_store_register, sim_fetch_register): Pass in
+ 	length parameter.  Return -1.
+
+Sun Feb  1 16:47:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Jan 31 18:15:41 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Jan 19 22:26:29 1998  Doug Evans  <devans@seba>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Jan 13 00:01:40 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Stores to abs16 memory addresses zero extend the
+	abs16 address.
+
+Mon Dec 15 23:17:11 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Thu Dec  4 09:21:05 1997  Doug Evans  <devans@canuck.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Oct 22 14:43:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_load): Pass lma_p and sim_write args to
+ 	sim_load_file.
+
+Fri Oct  3 09:28:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 24 17:38:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 23 11:04:38 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 22 11:46:20 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Sep 19 17:45:25 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 15 17:36:15 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Thu Sep  4 17:21:23 1997  Doug Evans  <dje@seba>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep  2 18:41:23 1997  Jeffrey A Law  (law@cygnus.com)
+
+        * simops.c: PC relative instructions are relative to the next
+	instruction, not the current instruction.
+
+Wed Aug 27 18:13:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Tue Aug 26 10:40:45 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_kill): Delete.
+	(sim_create_inferior): Add ABFD argument.
+	(sim_load): Move setting of PC from here.
+	(sim_create_inferior): To here.
+
+Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Mon Aug 25 16:14:44 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_open): Add ABFD argument.
+
+Tue Jun 24 13:44:08 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (sim_resume): Clear State.exited.
+	(sim_stop_reason): If State.exited is nonzero, then indicate that
+	the simulator exited instead of stopped.
+	* mn10200_sim.h (struct _state): Add exited field.
+	* simops.c (syscall): Set State.exited for SYS_exit.
+
+Tue May 20 17:45:47 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c: Replace all references to load_mem and store_mem
+	with references to load_byte, load_half, load_3_byte, load_word
+	and store_byte, store_half, store_3_byte, store_word.
+	(INLINE): Delete definition.
+	(load_mem_big): Likewise.
+	(max_mem): Make it global.
+	(dispatch): Make this function inline.
+	(load_mem, store_mem): Delete functions.
+	* mn10200_sim.h (INLINE): Define.
+	(RLW): Delete unused definition.
+	(load_mem, store_mem): Delete declarations.
+	(load_mem_big): New definition.
+	(load_byte, load_half, load_3_byte, load_word): New functions.
+	(store_byte, store_half, store_3_byte, store_word): New functions.
+	* simops.c:  Replace all references to load_mem and store_mem
+	with references to load_byte, load_half, load_3_byte, load_word
+	and store_byte, store_half, store_3_byte, store_word.
+
+Tue May 20 10:21:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_open): Add callback argument.
+	(sim_set_callbacks): Delete SIM_DESC argument.
+
+Sun May 18 16:59:09 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (compare_simops): New function.
+	(sim_open): Sort the Simops table before inserting entries
+	into the hash table.
+
+Fri May 16 16:29:18 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (load_mem): Fix formatting/indention problems with
+	last change.  If we get a load from an out of range address,
+	abort instead of returning zero.
+	(store_mem): Abort if we try to store to an out of range address.
+
+Wed May 14 21:21:30 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* simops.c (OP_F010): Fix some arguments to correspond
+	with reality (types of arguments passed to lseek, read,
+	write, open).
+
+	* interp.c (max_mem): New variable.
+	(load_mem): Check memory address against max_mem to
+	avoid some self-destructive behaviors.
+
+Tue May 13 21:45:24 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix typo in cc0 setting for lsr.
+
+Tue May  6 13:22:12 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c: Random typo/thinko cleanups.
+
+Thu Apr 24 00:39:51 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Apr 21 10:29:30 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix typo in "open" syscall emulation.
+
+Fri Apr 18 14:04:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_stop): Add stub function.
+
+Thu Apr 17 03:23:58 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* Makefile.in (SIM_OBJS): Add sim-load.o.
+	* interp.c (sim_kind, myname): New static locals.
+	(sim_open): Set sim_kind, myname.  Ignore -E arg.
+	(sim_load): Return SIM_RC.  New arg abfd.  Call sim_load_file to
+	load file into simulator.  Set start address from bfd.
+	(sim_create_inferior): Return SIM_RC.  Delete arg start_address.
+
+Wed Apr 16 18:06:50 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* simops.c (OP_F010): SYS_execv, SYS_time, SYS_times, SYS_utime
+ 	only include if implemented by host.
+
+Mon Apr  7 15:45:02 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Fri Apr  4 20:01:56 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in: Change mn10200-opc.o to m10200-opc.o, to match
+	corresponding change in opcodes directory.
+
+Wed Apr  2 15:06:28 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* interp.c (sim_open): New arg `kind'.
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr  2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Thu Mar 20 20:28:14 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200_sim.h: Protect uses of "signed" to cater to broken
+	non-ansi compilers (HPs).  Don't use #error for the same reason.
+
+Tue Mar 18 12:23:31 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Don't sign-extend immediate for "mov imm16,an".
+	Simplify "sub" handling.  Fix "mul" to properly sign extend
+	operands.  Set CF appropriately for btst imm16,dn.  Implement "rti".
+
+	* gencode.c: Delete unused "Opcodes" and "curop" variables.
+
+Wed Mar 19 01:14:00 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* configure: Re-generate.
+
+Fri Mar 14 10:34:11 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* configure: Regenerate to track ../common/aclocal.m4 changes.
+
+Thu Mar 13 12:53:14 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* interp.c (sim_open): New SIM_DESC result.  Argument is now
+	in argv form.
+	(other sim_*): New SIM_DESC argument.
+
+Wed Mar 12 15:02:35 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix typo for "bclr".
+
+Wed Feb 26 16:46:13 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Handle new calling convention in emulated syscall
+	code.
+
+Mon Feb 24 14:25:11 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (load_mem_big): Add some missing parens.
+
+Wed Feb 19 23:19:08 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Don't use "long long" data types for intermediate
+	values in "divu", "mul" and "mulu" instructions.
+
+Fri Feb 14 02:46:46 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (hash): Rework to be more efficient.
+	(dispatch): Renamed from lookup_hash.  Dispatch to the target
+	function and update the PC here.
+	(load_mem_big): Now a macro.
+	(sim_resume): Restructure code to read an insn, determine its
+	length, call dispatch routines, etc to be much more efficient.
+
+Fri Feb  7 12:59:36 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (MAX_HASH): Redefine to 127.
+	(struct hash_entry): Add "count" field when HASH_STAT is defined.
+	(hash): Improve hashing for many heavily used opcodes.
+	(lookup_hash): Bump counters if HASH_STAT is defined.
+	(sim_open): Don't put the same opcode in the hash table more
+	than once.  Clear counters if HASH_STAT is defined.
+	(sim_resume): After program exits, dump hash table stats if
+	HASH_STAT is defined.
+
+Wed Feb  5 10:28:37 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix register extraction for "ext dn".
+
+Tue Feb  4 17:27:41 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix register extractions for "movbu (an), dm".
+
+Tue Feb  4 13:33:30 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* Makefile.in (@COMMON_MAKEFILE_FRAG): Use
+	COMMON_{PRE,POST}_CONFIG_FRAG instead.
+	* configure.in: sinclude ../common/aclocal.m4.
+	* configure: Regenerated.
+
+Fri Jan 31 01:19:02 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Get carry-in bit right for rol.  Just clear the
+	NF flag for btst imm8,dn.
+
+Wed Jan 29 15:47:42 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Properly compute ZF flag for many insns.
+
+Sat Jan 25 17:06:55 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Properly truncate divisor and dividend before
+	performing "divu" operation.
+
+Fri Jan 24 10:47:48 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c (init_system): Allocate 2^19 bytes of space for
+	the simulator.
+
+Thu Jan 23 21:17:33 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Rework code to extract arguments for emulated
+	syscalls to handle 24bit pointers.
+
+Thu Jan 23 14:06:04 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure configure.in Makefile.in:  Update to new configure
+	scheme which is more compatible with WinGDB builds.
+	* configure.in:  Improve comment on how to run autoconf.
+	* configure:  Re-run autoconf to get new ../common/aclocal.m4.
+	* Makefile.in:  Use autoconf substitution to install common
+	makefile fragment.
+
+Thu Jan 23 12:04:38 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix destination register for "mov (abs24),an".
+
+Tue Jan 21 15:59:21 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: "rts" adds 4 to the stack pointer.
+
+	* simops.c: Fix CF and CX computation for add instructions.
+
+	* simops.c: Leave the upper 8 bits alone for logical ops.
+	Mask off high 8 bits before doing any shifts/rotates.
+	Fix carry bit handling in rotates again.
+
+Mon Jan 20 10:45:08 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Don't lose the sign bit for "asr".
+
+Fri Jan 17 01:45:14 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix overflow computation for "cmp" and "sub"
+	instructions.
+
+	* simops.c: Use the right register for "jmp (an)" and "jsr (an)".
+
+	* interp.c (hash): Improve hashing for 3 byte instructions.
+
+	* simops.c: Fix extraction of 16/24bit immediates for some
+	instructions.  "cmp" instructions only modify the PSW.
+	Fix various thinkos when extracting register operands too.
+
+Thu Jan 16 07:47:56 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* simops.c: Fix "rol" and "ror".
+
+	* simops.c: Truncate PC to 24bits after modifying it.
+	Closer stab at emulated system calls.
+
+Tue Jan 14 12:33:12 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* interp.c (hash): Improve hashing of two byte insns.
+	(store_mem): Handle storing 3 byte quantities.
+
+	* simops.c: Fix various typos/thinkos.
+
+	* interp.c (load_mem_big, load_mem, store_mem): Fix thinko in
+	code to handle 24bit addresses.
+	* simops.c (REG0_8, REG0_16): Fix typo.
+
+Mon Jan  6 16:17:09 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200_sim.h: Various fixes for mixed 16/24bit architecture.
+	* interp.c: Similarly.
+	* simops.c: Similarly.
+
+	* Makefile.in, config.in, configure, configure.in: New files.
+	* gencode.c, interp.c, mn10200_sim.h, simops.c: New files.
+	
diff --git a/sim/mn10200/Makefile.in b/sim/mn10200/Makefile.in
new file mode 100644
index 00000000000..dd9581ced26
--- /dev/null
+++ b/sim/mn10200/Makefile.in
@@ -0,0 +1,52 @@
+#    Makefile template for Configure for the mn10200 sim library.
+#    Copyright (C) 1997 Free Software Foundation, Inc.
+#    Written by Cygnus Support.
+# 
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+## COMMON_PRE_CONFIG_FRAG
+
+SIM_OBJS = interp.o table.o simops.o sim-load.o
+SIM_EXTRA_CFLAGS = -I$(srcdir)/../../newlib/libc/sys/sysmec
+SIM_EXTRA_CLEAN = clean-extra
+
+# Select mn10200 support in nltvals.def.
+NL_TARGET = -DNL_TARGET_mn10200
+
+INCLUDE = mn10200_sim.h $(srcdir)/../../include/callback.h
+
+## COMMON_POST_CONFIG_FRAG
+
+simops.h: gencode
+	./gencode -h >$@
+
+table.c: gencode simops.h
+	./gencode >$@
+
+gencode.o: gencode.c $(INCLUDE)
+	$(CC_FOR_BUILD) $(BUILD_CFLAGS) -c $(srcdir)/gencode.c
+
+m10200-opc.o: $(srcdir)/../../opcodes/m10200-opc.c
+	$(CC_FOR_BUILD) $(BUILD_CFLAGS) -c $(srcdir)/../../opcodes/m10200-opc.c
+
+gencode: gencode.o m10200-opc.o
+	$(CC_FOR_BUILD) $(BUILD_CFLAGS) -o gencode gencode.o m10200-opc.o $(BUILD_LIB)
+
+clean-extra:
+	rm -f table.c simops.h gencode
+
+interp.o: interp.c table.c $(INCLUDE)
+simops.o: simops.c $(INCLUDE)
+table.o: table.c
diff --git a/sim/mn10200/acconfig.h b/sim/mn10200/acconfig.h
new file mode 100644
index 00000000000..f9b87a10c60
--- /dev/null
+++ b/sim/mn10200/acconfig.h
@@ -0,0 +1,15 @@
+
+/* Define to 1 if NLS is requested.  */
+#undef ENABLE_NLS
+
+/* Define as 1 if you have catgets and don't want to use GNU gettext.  */
+#undef HAVE_CATGETS
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
+#undef HAVE_GETTEXT
+
+/* Define as 1 if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if your locale.h file contains LC_MESSAGES.  */
+#undef HAVE_LC_MESSAGES
diff --git a/sim/mn10200/config.in b/sim/mn10200/config.in
new file mode 100644
index 00000000000..1f87a2bee4e
--- /dev/null
+++ b/sim/mn10200/config.in
@@ -0,0 +1,158 @@
+/* config.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if using alloca.c.  */
+#undef C_ALLOCA
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+#undef HAVE_ALLOCA_H
+
+/* Define if you have a working `mmap' system call.  */
+#undef HAVE_MMAP
+
+/* Define as __inline if that's what the C compiler calls it.  */
+#undef inline
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef off_t
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define to `unsigned' if <sys/types.h> doesn't define.  */
+#undef size_t
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Define to 1 if NLS is requested.  */
+#undef ENABLE_NLS
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
+#undef HAVE_GETTEXT
+
+/* Define as 1 if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if your locale.h file contains LC_MESSAGES.  */
+#undef HAVE_LC_MESSAGES
+
+/* Define if you have the __argz_count function.  */
+#undef HAVE___ARGZ_COUNT
+
+/* Define if you have the __argz_next function.  */
+#undef HAVE___ARGZ_NEXT
+
+/* Define if you have the __argz_stringify function.  */
+#undef HAVE___ARGZ_STRINGIFY
+
+/* Define if you have the __setfpucw function.  */
+#undef HAVE___SETFPUCW
+
+/* Define if you have the dcgettext function.  */
+#undef HAVE_DCGETTEXT
+
+/* Define if you have the getcwd function.  */
+#undef HAVE_GETCWD
+
+/* Define if you have the getpagesize function.  */
+#undef HAVE_GETPAGESIZE
+
+/* Define if you have the getrusage function.  */
+#undef HAVE_GETRUSAGE
+
+/* Define if you have the munmap function.  */
+#undef HAVE_MUNMAP
+
+/* Define if you have the putenv function.  */
+#undef HAVE_PUTENV
+
+/* Define if you have the setenv function.  */
+#undef HAVE_SETENV
+
+/* Define if you have the setlocale function.  */
+#undef HAVE_SETLOCALE
+
+/* Define if you have the sigaction function.  */
+#undef HAVE_SIGACTION
+
+/* Define if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if you have the strcasecmp function.  */
+#undef HAVE_STRCASECMP
+
+/* Define if you have the strchr function.  */
+#undef HAVE_STRCHR
+
+/* Define if you have the time function.  */
+#undef HAVE_TIME
+
+/* Define if you have the <argz.h> header file.  */
+#undef HAVE_ARGZ_H
+
+/* Define if you have the <fcntl.h> header file.  */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the <fpu_control.h> header file.  */
+#undef HAVE_FPU_CONTROL_H
+
+/* Define if you have the <limits.h> header file.  */
+#undef HAVE_LIMITS_H
+
+/* Define if you have the <locale.h> header file.  */
+#undef HAVE_LOCALE_H
+
+/* Define if you have the <malloc.h> header file.  */
+#undef HAVE_MALLOC_H
+
+/* Define if you have the <nl_types.h> header file.  */
+#undef HAVE_NL_TYPES_H
+
+/* Define if you have the <stdlib.h> header file.  */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <strings.h> header file.  */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <sys/param.h> header file.  */
+#undef HAVE_SYS_PARAM_H
+
+/* Define if you have the <sys/resource.h> header file.  */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define if you have the <sys/time.h> header file.  */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <time.h> header file.  */
+#undef HAVE_TIME_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <values.h> header file.  */
+#undef HAVE_VALUES_H
diff --git a/sim/mn10200/configure b/sim/mn10200/configure
new file mode 100755
index 00000000000..e646fa8a499
--- /dev/null
+++ b/sim/mn10200/configure
@@ -0,0 +1,3892 @@
+#! /bin/sh
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+sim_inline="-DDEFAULT_INLINE=0"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# This file is derived from `gettext.m4'.  The difference is that the
+# included macros assume Cygnus-style source and build trees.
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+
+
+
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+
+
+# Check to see if we're running under Cygwin32, without using
+# AC_CANONICAL_*.  If so, set output variable CYGWIN32 to "yes".
+# Otherwise set it to "no".
+
+
+
+# Check to see if we're running under Win32, without using
+# AC_CANONICAL_*.  If so, set output variable EXEEXT to ".exe".
+# Otherwise set it to "".
+
+
+
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.2 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --disable-nls           do not use Native Language Support"
+ac_help="$ac_help
+  --with-included-gettext use the GNU gettext library included here"
+ac_help="$ac_help
+  --enable-maintainer-mode		Enable developer functionality."
+ac_help="$ac_help
+  --enable-sim-bswap			Use Host specific BSWAP instruction."
+ac_help="$ac_help
+  --enable-sim-cflags=opts		Extra CFLAGS for use in building simulator"
+ac_help="$ac_help
+  --enable-sim-debug=opts		Enable debugging flags"
+ac_help="$ac_help
+  --enable-sim-stdio			Specify whether to use stdio for console input/output."
+ac_help="$ac_help
+  --enable-sim-trace=opts		Enable tracing flags"
+ac_help="$ac_help
+  --enable-sim-profile=opts		Enable profiling flags"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.2"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=Makefile.in
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:677: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 692 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 709 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -nologo -E"
+  cat > conftest.$ac_ext <<EOF
+#line 726 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:784: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+  echo "$ac_t""yes" 1>&6
+  ISC=yes # If later tests want to check for ISC.
+  cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+  if test "$GCC" = yes; then
+    CC="$CC -posix"
+  else
+    CC="$CC -Xp"
+  fi
+else
+  echo "$ac_t""no" 1>&6
+  ISC=
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:805: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 810 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  ac_cv_header_stdc=yes
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 835 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "memchr" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 853 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "free" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+  :
+else
+  cat > conftest.$ac_ext <<EOF
+#line 874 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  :
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+  cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:909: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 914 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this.  */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this.  */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this.  */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+   It does not let you subtract one const X* pointer from another in an arm
+   of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this.  */
+  char *t;
+  char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+  *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+  int x[] = {25, 17};
+  const int *foo = &x[0];
+  ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+  typedef const int *iptr;
+  iptr p = 0;
+  ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+  struct s { int j; const int *ap[3]; };
+  struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+  const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_const=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+  cat >> confdefs.h <<\EOF
+#define const 
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:984: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat > conftest.$ac_ext <<EOF
+#line 991 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_inline=$ac_kw; break
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+  inline | yes) ;;
+  no) cat >> confdefs.h <<\EOF
+#define inline 
+EOF
+ ;;
+  *)  cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:1024: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1029 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_off_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:1057: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1062 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_size_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:1092: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1097 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_header_alloca_h=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:1125: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1130 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_alloca_works=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+  # that cause trouble.  Some versions do not even contain alloca or
+  # contain a buggy version.  If you still want to use their alloca,
+  # use ar to extract alloca.o from them instead of compiling alloca.c.
+  ALLOCA=alloca.${ac_objext}
+  cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:1190: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1195 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "webecray" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_os_cray=yes
+else
+  rm -rf conftest*
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1220: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1225 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+  break
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:1275: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_c_stack_direction=0
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1283 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+  static char *addr = 0;
+  auto char dummy;
+  if (addr == 0)
+    {
+      addr = &dummy;
+      return find_stack_direction ();
+    }
+  else
+    return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+  exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_stack_direction=1
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1327: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1332 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1366: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1371 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:1419: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1427 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the filesystem buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propogated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h.  */
+# ifndef HAVE_SYS_PARAM_H
+#  define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+	char *data, *data2, *data3;
+	int i, pagesize;
+	int fd;
+
+	pagesize = getpagesize();
+
+	/*
+	 * First, make a file with some known garbage in it.
+	 */
+	data = malloc(pagesize);
+	if (!data)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		*(data + i) = rand();
+	umask(0);
+	fd = creat("conftestmmap", 0600);
+	if (fd < 0)
+		exit(1);
+	if (write(fd, data, pagesize) != pagesize)
+		exit(1);
+	close(fd);
+
+	/*
+	 * Next, try to mmap the file at a fixed address which
+	 * already has something else allocated at it.  If we can,
+	 * also make sure that we see the same garbage.
+	 */
+	fd = open("conftestmmap", O_RDWR);
+	if (fd < 0)
+		exit(1);
+	data2 = malloc(2 * pagesize);
+	if (!data2)
+		exit(1);
+	data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+	if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+	    MAP_PRIVATE | MAP_FIXED, fd, 0L))
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data2 + i))
+			exit(1);
+
+	/*
+	 * Finally, make sure that changes to the mapped area
+	 * do not percolate back to the file as seen by read().
+	 * (This is a bug on some variants of i386 svr4.0.)
+	 */
+	for (i = 0; i < pagesize; ++i)
+		*(data2 + i) = *(data2 + i) + 1;
+	data3 = malloc(pagesize);
+	if (!data3)
+		exit(1);
+	if (read(fd, data3, pagesize) != pagesize)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data3 + i))
+			exit(1);
+	close(fd);
+	unlink("conftestmmap");
+	exit(0);
+}
+
+EOF
+if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+# autoconf.info says this should be called right after AC_INIT.
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:1640: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:1661: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1679: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1723: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1752: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  if test -z "$CC"; then
+    case "`uname -s`" in
+    *win32* | *WIN32*)
+      # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1802: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="cl"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ ;;
+    esac
+  fi
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1843 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1872: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1943: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test "x$cross_compiling" = "xno"; then
+  CC_FOR_BUILD='$(CC)'
+else
+  CC_FOR_BUILD=gcc
+fi
+
+
+
+
+AR=${AR-ar}
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2009: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+ALL_LINGUAS=
+                              
+   for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2043: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2048 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2083: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2088 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2140: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2145 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+   fi
+
+   if test $ac_cv_header_locale_h = yes; then
+    echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:2202: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2207 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+    fi
+  fi
+   echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:2235: checking whether NLS is requested" >&5
+        # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+  enableval="$enable_nls"
+  USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+    echo "$ac_t""$USE_NLS" 1>&6
+    
+
+    USE_INCLUDED_LIBINTL=no
+
+        if test "$USE_NLS" = "yes"; then
+      cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+      echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:2255: checking whether included gettext is requested" >&5
+      # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+  withval="$with_included_gettext"
+  nls_cv_force_use_gnu_gettext=$withval
+else
+  nls_cv_force_use_gnu_gettext=no
+fi
+
+      echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+                        		nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:2274: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2279 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:2301: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2306 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:2329: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lintl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2337 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:2364: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2369 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+	      # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2404: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+	      if test "$MSGFMT" != "no"; then
+		for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2438: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2443 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+		# Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2493: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2528: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		cat > conftest.$ac_ext <<EOF
+#line 2560 "configure"
+#include "confdefs.h"
+
+int main() {
+extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr
+; return 0; }
+EOF
+if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  CATOBJEXT=.gmo
+		   DATADIRNAME=share
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CATOBJEXT=.mo
+		   DATADIRNAME=lib
+fi
+rm -f conftest*
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+	        
+        if test "$CATOBJEXT" = "NONE"; then
+	  	  	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+                INTLOBJS="\$(GETTOBJS)"
+        # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2600: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2634: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2669: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/../intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=libintl.h
+        nls_cv_header_libgt=libgettext.h
+      fi
+
+            if test "$XGETTEXT" != ":"; then
+			if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=libintl.h
+      nls_cv_header_libgt=libgettext.h
+    fi
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+                for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+        
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+  
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:2759: checking for catalogs to be installed" >&5
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       echo "$ac_t""$LINGUAS" 1>&6
+     fi
+
+          if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+            if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   
+
+            if test -f $srcdir/po2tbl.sed.in; then
+      if test "$CATOBJEXT" = ".cat"; then
+	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:2787: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2792 "configure"
+#include "confdefs.h"
+#include <linux/version.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  msgformat=linux
+else
+  echo "$ac_t""no" 1>&6
+msgformat=xopen
+fi
+
+
+	          	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+      fi
+            sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+	 $srcdir/po2tbl.sed.in > po2tbl.sed
+   fi
+
+            if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   
+   
+
+   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+   
+
+      l=
+   
+
+            if test -d $srcdir/po; then
+      test -d po || mkdir po
+      if test "x$srcdir" != "x."; then
+	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+	    posrcprefix="$srcdir/"
+	 else
+	    posrcprefix="../$srcdir/"
+	 fi
+      else
+	 posrcprefix="../"
+      fi
+      rm -f po/POTFILES
+      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	 < $srcdir/po/POTFILES.in > po/POTFILES
+   fi
+  
+
+# Check for common headers.
+# FIXME: Seems to me this can cause problems for i386-windows hosts.
+# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2866: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2871 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2906: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2911 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h fpu_control.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2946: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2951 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getrusage time sigaction __setfpucw
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2985: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2990 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+# Check for socket libraries
+echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6
+echo "configure:3040: checking for bind in -lsocket" >&5
+ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lsocket  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3048 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char bind();
+
+int main() {
+bind()
+; return 0; }
+EOF
+if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lsocket $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:3087: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lnsl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3095 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lnsl $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+. ${srcdir}/../../bfd/configure.host
+
+
+
+USE_MAINTAINER_MODE=no
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  case "${enableval}" in
+  yes)	MAINT="" USE_MAINTAINER_MODE=yes ;;
+  no)	MAINT="#" ;;
+  *)	{ echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;;
+esac
+if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
+  echo "Setting maintainer mode" 6>&1
+fi
+else
+  MAINT="#"
+fi
+
+
+
+# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then
+  enableval="$enable_sim_bswap"
+  case "${enableval}" in
+  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
+  no)	sim_bswap="-DWITH_BSWAP=0";;
+  *)	{ echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+  echo "Setting bswap flags = $sim_bswap" 6>&1
+fi
+else
+  sim_bswap=""
+fi
+
+
+
+# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
+if test "${enable_sim_cflags+set}" = set; then
+  enableval="$enable_sim_cflags"
+  case "${enableval}" in
+  yes)	 sim_cflags="-O2 -fomit-frame-pointer";;
+  trace) { echo "configure: error: "Please use --enable-sim-debug instead."" 1>&2; exit 1; }; sim_cflags="";;
+  no)	 sim_cflags="";;
+  *)	 sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
+  echo "Setting sim cflags = $sim_cflags" 6>&1
+fi
+else
+  sim_cflags=""
+fi
+
+
+
+# Check whether --enable-sim-debug or --disable-sim-debug was given.
+if test "${enable_sim_debug+set}" = set; then
+  enableval="$enable_sim_debug"
+  case "${enableval}" in
+  yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
+  no)  sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
+  *)   sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
+  echo "Setting sim debug = $sim_debug" 6>&1
+fi
+else
+  sim_debug=""
+fi
+
+
+
+# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then
+  enableval="$enable_sim_stdio"
+  case "${enableval}" in
+  yes)	sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+  no)	sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+  *)	{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+  echo "Setting stdio flags = $sim_stdio" 6>&1
+fi
+else
+  sim_stdio=""
+fi
+
+
+
+# Check whether --enable-sim-trace or --disable-sim-trace was given.
+if test "${enable_sim_trace+set}" = set; then
+  enableval="$enable_sim_trace"
+  case "${enableval}" in
+  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
+  no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+  [-0-9]*)
+	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+  [a-z]*)
+	sim_trace=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_trace" = x; then
+	    sim_trace="-DWITH_TRACE='(TRACE_$x"
+	  else
+	    sim_trace="${sim_trace}|TRACE_$x"
+	  fi
+	done
+	sim_trace="$sim_trace)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+  echo "Setting sim trace = $sim_trace" 6>&1
+fi
+else
+  sim_trace=""
+fi
+
+
+
+# Check whether --enable-sim-profile or --disable-sim-profile was given.
+if test "${enable_sim_profile+set}" = set; then
+  enableval="$enable_sim_profile"
+  case "${enableval}" in
+  yes)	sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
+  no)	sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+  [-0-9]*)
+	sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+  [a-z]*)
+	sim_profile=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_profile" = x; then
+	    sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+	  else
+	    sim_profile="${sim_profile}|PROFILE_$x"
+	  fi
+	done
+	sim_profile="$sim_profile)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
+  echo "Setting sim profile = $sim_profile" 6>&1
+fi
+else
+  sim_profile=""
+fi
+
+
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:3282: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3287 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_type_signal=void
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_type_signal=int
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:3324: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
+sim_link_files=
+sim_link_links=
+
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+  sim_link_files=tconfig.in
+else
+  sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3372: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3377 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@sim_environment@%$sim_environment%g
+s%@sim_alignment@%$sim_alignment%g
+s%@sim_assert@%$sim_assert%g
+s%@sim_bitsize@%$sim_bitsize%g
+s%@sim_endian@%$sim_endian%g
+s%@sim_hostendian@%$sim_hostendian%g
+s%@sim_float@%$sim_float%g
+s%@sim_scache@%$sim_scache%g
+s%@sim_default_model@%$sim_default_model%g
+s%@sim_hw_cflags@%$sim_hw_cflags%g
+s%@sim_hw_objs@%$sim_hw_objs%g
+s%@sim_hw@%$sim_hw%g
+s%@sim_inline@%$sim_inline%g
+s%@sim_packages@%$sim_packages%g
+s%@sim_regparm@%$sim_regparm%g
+s%@sim_reserved_bits@%$sim_reserved_bits%g
+s%@sim_smp@%$sim_smp%g
+s%@sim_stdcall@%$sim_stdcall%g
+s%@sim_xor_endian@%$sim_xor_endian%g
+s%@build_warnings@%$build_warnings%g
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@CC@%$CC%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
+s%@HDEFINES@%$HDEFINES%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CPP@%$CPP%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
+s%@MAINT@%$MAINT%g
+s%@sim_bswap@%$sim_bswap%g
+s%@sim_cflags@%$sim_cflags%g
+s%@sim_debug@%$sim_debug%g
+s%@sim_stdio@%$sim_stdio%g
+s%@sim_trace@%$sim_trace%g
+s%@sim_profile@%$sim_profile%g
+s%@EXEEXT@%$EXEEXT%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$sim_link_files"
+ac_dests="$sim_link_links"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+  set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+  set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+  echo "linking $srcdir/$ac_source to $ac_dest"
+
+  if test ! -r $srcdir/$ac_source; then
+    { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+  fi
+  rm -f $ac_dest
+
+  # Make relative symlinks.
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+    # The dest file is in a subdirectory.
+    test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+    ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dest_dir_suffix.
+    ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dest_dir_suffix= ac_dots=
+  fi
+
+  case "$srcdir" in
+  [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+  *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+  esac
+
+  # Make a symlink if possible; otherwise try a hard link.
+  if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+    ln $srcdir/$ac_source $ac_dest; then :
+  else
+    { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+  fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+case "x$CONFIG_FILES" in
+ xMakefile*)
+   echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+   rm -f Makesim1.tmp Makesim2.tmp Makefile
+   sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+   sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+   sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+	-e '/^## COMMON_POST_/ r Makesim2.tmp' \
+	<Makefile.sim >Makefile
+   rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+   ;;
+ esac
+ case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+
diff --git a/sim/mn10200/configure.in b/sim/mn10200/configure.in
new file mode 100644
index 00000000000..033b0bc1615
--- /dev/null
+++ b/sim/mn10200/configure.in
@@ -0,0 +1,10 @@
+dnl Process this file with autoconf to produce a configure script.
+sinclude(../common/aclocal.m4)
+AC_PREREQ(2.5)dnl
+AC_INIT(Makefile.in)
+
+SIM_AC_COMMON
+
+AC_CHECK_HEADERS(unistd.h)
+
+SIM_AC_OUTPUT
diff --git a/sim/mn10200/gencode.c b/sim/mn10200/gencode.c
new file mode 100644
index 00000000000..8ba873eb224
--- /dev/null
+++ b/sim/mn10200/gencode.c
@@ -0,0 +1,154 @@
+#include "mn10200_sim.h"
+
+static void write_header PARAMS ((void));
+static void write_opcodes PARAMS ((void));
+static void write_template PARAMS ((void));
+
+int
+main (argc, argv)
+     int argc;
+     char *argv[];
+{
+  if ((argc > 1) && (strcmp (argv[1], "-h") == 0))
+    write_header();
+  else if ((argc > 1) && (strcmp (argv[1], "-t") == 0))
+    write_template ();
+  else
+    write_opcodes();
+  return 0;
+}
+
+
+static void
+write_header ()
+{
+  struct mn10200_opcode *opcode;
+
+  for (opcode = (struct mn10200_opcode *)mn10200_opcodes; opcode->name; opcode++)
+    printf("void OP_%X PARAMS ((unsigned long, unsigned long));\t\t/* %s */\n",
+	   opcode->opcode, opcode->name);
+}
+
+
+/* write_template creates a file all required functions, ready */
+/* to be filled out */
+
+static void
+write_template ()
+{
+  struct mn10200_opcode *opcode;
+  int i,j;
+
+  printf ("#include \"mn10200_sim.h\"\n");
+  printf ("#include \"simops.h\"\n");
+
+  for (opcode = (struct mn10200_opcode *)mn10200_opcodes; opcode->name; opcode++)
+    {
+      printf("/* %s */\nvoid\nOP_%X (insn, extension)\n     unsigned long insn, extension;\n{\n", opcode->name, opcode->opcode);
+	  
+      /* count operands */
+      j = 0;
+      for (i = 0; i < 6; i++)
+	{
+	  int flags = mn10200_operands[opcode->operands[i]].flags;
+
+	  if (flags)
+	    j++;
+	}
+      switch (j)
+	{
+	case 0:
+	  printf ("printf(\"   %s\\n\");\n", opcode->name);
+	  break;
+	case 1:
+	  printf ("printf(\"   %s\\t%%x\\n\", OP[0]);\n", opcode->name);
+	  break;
+	case 2:
+	  printf ("printf(\"   %s\\t%%x,%%x\\n\",OP[0],OP[1]);\n",
+		  opcode->name);
+	  break;
+	case 3:
+	  printf ("printf(\"   %s\\t%%x,%%x,%%x\\n\",OP[0],OP[1],OP[2]);\n",
+		  opcode->name);
+	  break;
+	default:
+	  fprintf (stderr,"Too many operands: %d\n", j);
+	}
+      printf ("}\n\n");
+    }
+}
+
+static void
+write_opcodes ()
+{
+  struct mn10200_opcode *opcode;
+  int i, j;
+  int numops;
+  
+  /* write out opcode table */
+  printf ("#include \"mn10200_sim.h\"\n");
+  printf ("#include \"simops.h\"\n\n");
+  printf ("struct simops Simops[] = {\n");
+  
+  for (opcode = (struct mn10200_opcode *)mn10200_opcodes; opcode->name; opcode++)
+    {
+      int size;
+
+      if (opcode->format == FMT_1)
+	size = 1;
+      else if (opcode->format == FMT_2 || opcode->format == FMT_4)
+	size = 2;
+      else if (opcode->format == FMT_3 || opcode->format == FMT_5)
+	size = 3;
+      else if (opcode->format == FMT_6)
+	size = 4;
+      else if (opcode->format == FMT_7)
+	size = 5;
+      else
+	abort ();
+
+      printf ("  { 0x%x,0x%x,OP_%X,%d,%d,",
+	      opcode->opcode, opcode->mask, opcode->opcode,
+	      size, opcode->format);
+      
+      /* count operands */
+      j = 0;
+      for (i = 0; i < 6; i++)
+	{
+	  int flags = mn10200_operands[opcode->operands[i]].flags;
+
+	  if (flags)
+	    j++;
+	}
+      printf ("%d,{",j);
+	  
+      j = 0;
+      numops = 0;
+      for (i = 0; i < 6; i++)
+	{
+	  int flags = mn10200_operands[opcode->operands[i]].flags;
+	  int shift = mn10200_operands[opcode->operands[i]].shift;
+
+	  if (flags)
+	    {
+	      if (j)
+		printf (", ");
+	      printf ("%d,%d,%d", shift,
+		      mn10200_operands[opcode->operands[i]].bits,flags);
+	      j = 1;
+	      numops++;
+	    }
+	}
+
+      switch (numops)
+	{
+	case 0:
+	  printf ("0,0,0");
+	case 1:
+	  printf (",0,0,0");
+	}
+
+      printf ("}},\n");
+    }
+  printf ("{ 0,0,NULL,0,0,0,{0,0,0,0,0,0}},\n};\n");
+}
diff --git a/sim/mn10200/interp.c b/sim/mn10200/interp.c
new file mode 100644
index 00000000000..df95b7c7ba5
--- /dev/null
+++ b/sim/mn10200/interp.c
@@ -0,0 +1,800 @@
+#include <signal.h>
+#include "sysdep.h"
+#include "bfd.h"
+
+#include "mn10200_sim.h"
+
+host_callback *mn10200_callback;
+int mn10200_debug;
+static SIM_OPEN_KIND sim_kind;
+static char *myname;
+
+static void dispatch PARAMS ((uint32, uint32, int));
+static long hash PARAMS ((long));
+static void init_system PARAMS ((void));
+#define MAX_HASH  127
+
+struct hash_entry
+{
+  struct hash_entry *next;
+  long opcode;
+  long mask;
+  struct simops *ops;
+#ifdef HASH_STAT
+  unsigned long count;
+#endif
+};
+
+int max_mem = 0;
+struct hash_entry hash_table[MAX_HASH+1];
+
+
+/* This probably doesn't do a very good job at bucket filling, but
+   it's simple... */
+static INLINE long 
+hash(insn)
+     long insn;
+{
+  /* These are one byte insns.  */
+  if ((insn & 0xffffff00) == 0x00)
+    {
+      if ((insn & 0xf0) != 0x80)
+	return ((insn & 0xf0) >> 4) & 0x7f;
+
+      if ((insn & 0xf0) == 0x80
+	   && (insn & 0x0c) >> 2 != (insn & 0x03))
+	return (insn & 0xf0) & 0x7f;
+
+      return (insn & 0xff) & 0x7f;
+    }
+
+  if ((insn & 0xffff0000) == 0)
+    {
+      if ((insn & 0xf000) == 0xd000)
+	return ((insn & 0xfc00) >> 10) & 0x7f;
+
+      if ((insn & 0xf000) == 0xe000)
+	return ((insn & 0xff00) >> 8) & 0x7f;
+
+      if ((insn & 0xf200) == 0xf200)
+	return ((insn & 0xfff0) >> 4) & 0x7f;
+
+      if ((insn & 0xc000) == 0x4000
+	  || (insn & 0xf000) == 0x8000)
+	return ((insn & 0xf000) >> 8) & 0x7f;
+
+      if ((insn & 0xf200) == 0xf000)
+	return ((insn & 0xffc0) >> 8) & 0x7f;
+
+      return ((insn & 0xff00) >> 8) & 0x7f;
+    }
+
+  if ((insn & 0xff000000) == 0)
+    {
+
+      if ((insn & 0xf00000) != 0xf00000
+	   || (insn & 0xfc0000) == 0xf80000)
+	return ((insn & 0xfc0000) >> 16) & 0x7f;
+
+      if ((insn & 0xff0000) == 0xf50000)
+	return ((insn & 0xfff000) >> 12) & 0x7f;
+      return ((insn & 0xff0000) >> 16) & 0x7f;
+    }
+
+  return ((insn & 0xfff0000) >> 20) & 0x7f;
+}
+
+static INLINE void
+dispatch (insn, extension, length)
+     uint32 insn;
+     uint32 extension;
+     int length;
+{
+  struct hash_entry *h;
+
+  h = &hash_table[hash(insn)];
+
+  while ((insn & h->mask) != h->opcode
+	  || (length != h->ops->length))
+    {
+      if (!h->next)
+	{
+	  (*mn10200_callback->printf_filtered) (mn10200_callback,
+	    "ERROR looking up hash for 0x%x, PC=0x%x\n", insn, PC);
+	  exit(1);
+	}
+      h = h->next;
+    }
+
+
+#ifdef HASH_STAT
+  h->count++;
+#endif
+
+  /* Now call the right function.  */
+  (h->ops->func)(insn, extension);
+  PC += length;
+}
+
+/* FIXME These would more efficient to use than load_mem/store_mem,
+   but need to be changed to use the memory map.  */
+
+uint32
+get_word (x)
+      uint8 *x;
+{
+  uint8 *a = x;
+  return (a[3]<<24) + (a[2]<<16) + (a[1]<<8) + (a[0]);
+}
+
+void
+put_word (addr, data)
+     uint8 *addr;
+     uint32 data;
+{
+  uint8 *a = addr;
+  a[0] = data & 0xff;
+  a[1] = (data >> 8) & 0xff;
+  a[2] = (data >> 16) & 0xff;
+  a[3] = (data >> 24) & 0xff;
+}
+
+void
+sim_size (power)
+     int power;
+
+{
+  if (State.mem)
+    free (State.mem);
+
+  max_mem = 1 << power;
+  State.mem = (uint8 *) calloc (1,  1 << power);
+  if (!State.mem)
+    {
+      (*mn10200_callback->printf_filtered) (mn10200_callback, "Allocation of main memory failed.\n");
+      exit (1);
+    }
+}
+
+static void
+init_system ()
+{
+  if (!State.mem)
+    sim_size(19);
+}
+
+int
+sim_write (sd,addr, buffer, size)
+     SIM_DESC sd;
+     SIM_ADDR addr;
+     unsigned char *buffer;
+     int size;
+{
+  int i;
+
+  init_system ();
+
+  for (i = 0; i < size; i++)
+    store_byte (addr + i, buffer[i]);
+
+  return size;
+}
+
+/* Compare two opcode table entries for qsort.  */
+static int
+compare_simops (arg1, arg2)
+     const PTR arg1;
+     const PTR arg2;
+{
+  unsigned long code1 = ((struct simops *)arg1)->opcode;
+  unsigned long code2 = ((struct simops *)arg2)->opcode;
+
+  if (code1 < code2)
+    return -1;
+  if (code2 < code1)
+    return 1;
+  return 0;
+}
+
+SIM_DESC
+sim_open (kind, cb, abfd, argv)
+     SIM_OPEN_KIND kind;
+     host_callback *cb;
+     struct _bfd *abfd;
+     char **argv;
+{
+  struct simops *s;
+  struct hash_entry *h;
+  char **p;
+  int i;
+
+  mn10200_callback = cb;
+
+  /* Sort the opcode array from smallest opcode to largest.
+     This will generally improve simulator performance as the smaller
+     opcodes are generally preferred to the larger opcodes.  */
+  for (i = 0, s = Simops; s->func; s++, i++)
+    ;
+  qsort (Simops, i, sizeof (Simops[0]), compare_simops);
+
+  sim_kind = kind;
+  myname = argv[0];
+
+  for (p = argv + 1; *p; ++p)
+    {
+      if (strcmp (*p, "-E") == 0)
+	++p; /* ignore endian spec */
+      else
+#ifdef DEBUG
+      if (strcmp (*p, "-t") == 0)
+	mn10200_debug = DEBUG;
+      else
+#endif
+	(*mn10200_callback->printf_filtered) (mn10200_callback, "ERROR: unsupported option(s): %s\n",*p);
+    }
+
+  /* put all the opcodes in the hash table */
+  for (s = Simops; s->func; s++)
+    {
+      h = &hash_table[hash(s->opcode)];
+      
+      /* go to the last entry in the chain */
+      while (h->next)
+	{
+	  /* Don't insert the same opcode more than once.  */
+	  if (h->opcode == s->opcode
+	      && h->mask == s->mask
+	      && h->ops == s)
+	    break;
+	  else
+	    h = h->next;
+	}
+
+      /* Don't insert the same opcode more than once.  */
+      if (h->opcode == s->opcode
+	  && h->mask == s->mask
+	  && h->ops == s)
+	continue;
+
+      if (h->ops)
+	{
+	  h->next = calloc(1,sizeof(struct hash_entry));
+	  h = h->next;
+	}
+      h->ops = s;
+      h->mask = s->mask;
+      h->opcode = s->opcode;
+#ifdef HASH_STAT
+      h->count = 0;
+#endif
+    }
+
+  /* fudge our descriptor for now */
+  return (SIM_DESC) 1;
+}
+
+
+void
+sim_set_profile (n)
+     int n;
+{
+  (*mn10200_callback->printf_filtered) (mn10200_callback, "sim_set_profile %d\n", n);
+}
+
+void
+sim_set_profile_size (n)
+     int n;
+{
+  (*mn10200_callback->printf_filtered) (mn10200_callback, "sim_set_profile_size %d\n", n);
+}
+
+int
+sim_stop (sd)
+     SIM_DESC sd;
+{
+  return 0;
+}
+
+void
+sim_resume (sd, step, siggnal)
+     SIM_DESC sd;
+     int step, siggnal;
+{
+  uint32 inst;
+
+  if (step)
+    State.exception = SIGTRAP;
+  else
+    State.exception = 0;
+
+  State.exited = 0;
+
+  do
+    {
+      unsigned long insn, extension;
+
+      /* Fetch the current instruction, fetch a double word to
+	 avoid redundant fetching for the common cases below.  */
+      inst = load_mem_big (PC, 2);
+
+      /* Using a giant case statement may seem like a waste because of the
+	 code/rodata size the table itself will consume.  However, using
+	 a giant case statement speeds up the simulator by 10-15% by avoiding
+	 cascading if/else statements or cascading case statements.  */
+      switch ((inst >> 8) & 0xff)
+	{
+	/* All the single byte insns except 0x80, which must
+	   be handled specially.  */
+	case 0x00:
+	case 0x01:
+	case 0x02:
+	case 0x03:
+	case 0x04:
+	case 0x05:
+	case 0x06:
+	case 0x07:
+	case 0x08:
+	case 0x09:
+	case 0x0a:
+	case 0x0b:
+	case 0x0c:
+	case 0x0d:
+	case 0x0e:
+	case 0x0f:
+	case 0x10:
+	case 0x11:
+	case 0x12:
+	case 0x13:
+	case 0x14:
+	case 0x15:
+	case 0x16:
+	case 0x17:
+	case 0x18:
+	case 0x19:
+	case 0x1a:
+	case 0x1b:
+	case 0x1c:
+	case 0x1d:
+	case 0x1e:
+	case 0x1f:
+	case 0x20:
+	case 0x21:
+	case 0x22:
+	case 0x23:
+	case 0x24:
+	case 0x25:
+	case 0x26:
+	case 0x27:
+	case 0x28:
+	case 0x29:
+	case 0x2a:
+	case 0x2b:
+	case 0x2c:
+	case 0x2d:
+	case 0x2e:
+	case 0x2f:
+	case 0x30:
+	case 0x31:
+	case 0x32:
+	case 0x33:
+	case 0x34:
+	case 0x35:
+	case 0x36:
+	case 0x37:
+	case 0x38:
+	case 0x39:
+	case 0x3a:
+	case 0x3b:
+	case 0x3c:
+	case 0x3d:
+	case 0x3e:
+	case 0x3f:
+	case 0x90:
+	case 0x91:
+	case 0x92:
+	case 0x93:
+	case 0x94:
+	case 0x95:
+	case 0x96:
+	case 0x97:
+	case 0x98:
+	case 0x99:
+	case 0x9a:
+	case 0x9b:
+	case 0x9c:
+	case 0x9d:
+	case 0x9e:
+	case 0x9f:
+	case 0xa0:
+	case 0xa1:
+	case 0xa2:
+	case 0xa3:
+	case 0xa4:
+	case 0xa5:
+	case 0xa6:
+	case 0xa7:
+	case 0xa8:
+	case 0xa9:
+	case 0xaa:
+	case 0xab:
+	case 0xac:
+	case 0xad:
+	case 0xae:
+	case 0xaf:
+	case 0xb0:
+	case 0xb1:
+	case 0xb2:
+	case 0xb3:
+	case 0xb4:
+	case 0xb5:
+	case 0xb6:
+	case 0xb7:
+	case 0xb8:
+	case 0xb9:
+	case 0xba:
+	case 0xbb:
+	case 0xbc:
+	case 0xbd:
+	case 0xbe:
+	case 0xbf:
+        case 0xeb:
+	case 0xf6:
+	case 0xfe:
+	case 0xff:
+	  insn = (inst >> 8) & 0xff;
+	  extension = 0;
+	  dispatch (insn, extension, 1);
+	  break;
+
+	/* Special case as mov dX,dX really means mov imm8,dX.  */
+	case 0x80:
+	case 0x85:
+	case 0x8a:
+	case 0x8f:
+	  /* Fetch the full instruction.  */
+	  insn = inst;
+	  extension = 0;
+	  dispatch (insn, extension, 2);
+	  break;
+
+	case 0x81:
+	case 0x82:
+	case 0x83:
+	case 0x84:
+	case 0x86:
+	case 0x87:
+	case 0x88:
+	case 0x89:
+	case 0x8b:
+	case 0x8c:
+	case 0x8d:
+	case 0x8e:
+	  insn = (inst >> 8) & 0xff;
+	  extension = 0;
+	  dispatch (insn, extension, 1);
+	  break;
+
+        /* And the two byte insns.  */
+	case 0x40:
+	case 0x41:
+	case 0x42:
+	case 0x43:
+	case 0x44:
+	case 0x45:
+	case 0x46:
+	case 0x47:
+	case 0x48:
+	case 0x49:
+	case 0x4a:
+	case 0x4b:
+	case 0x4c:
+	case 0x4d:
+	case 0x4e:
+	case 0x4f:
+	case 0x50:
+	case 0x51:
+	case 0x52:
+	case 0x53:
+	case 0x54:
+	case 0x55:
+	case 0x56:
+	case 0x57:
+	case 0x58:
+	case 0x59:
+	case 0x5a:
+	case 0x5b:
+	case 0x5c:
+	case 0x5d:
+	case 0x5e:
+	case 0x5f:
+	case 0x60:
+	case 0x61:
+	case 0x62:
+	case 0x63:
+	case 0x64:
+	case 0x65:
+	case 0x66:
+	case 0x67:
+	case 0x68:
+	case 0x69:
+	case 0x6a:
+	case 0x6b:
+	case 0x6c:
+	case 0x6d:
+	case 0x6e:
+	case 0x6f:
+	case 0x70:
+	case 0x71:
+	case 0x72:
+	case 0x73:
+	case 0x74:
+	case 0x75:
+	case 0x76:
+	case 0x77:
+	case 0x78:
+	case 0x79:
+	case 0x7a:
+	case 0x7b:
+	case 0x7c:
+	case 0x7d:
+	case 0x7e:
+	case 0x7f:
+	case 0xd0:
+	case 0xd1:
+	case 0xd2:
+	case 0xd3:
+	case 0xd4:
+	case 0xd5:
+	case 0xd6:
+	case 0xd7:
+	case 0xd8:
+	case 0xd9:
+	case 0xda:
+	case 0xdb:
+	case 0xe0:
+	case 0xe1:
+	case 0xe2:
+	case 0xe3:
+	case 0xe4:
+	case 0xe5:
+	case 0xe6:
+	case 0xe7:
+	case 0xe8:
+	case 0xe9:
+	case 0xea:
+	case 0xf0:
+	case 0xf1:
+	case 0xf2:
+	case 0xf3:
+	  /* Fetch the full instruction.  */
+	  insn = inst;
+	  extension = 0;
+	  dispatch (insn, extension, 2);
+	  break;
+
+	/* And the 3 byte insns with a 16bit operand in little
+	   endian format.  */
+	case 0xc0:
+	case 0xc1:
+	case 0xc2:
+	case 0xc3:
+	case 0xc4:
+	case 0xc5:
+	case 0xc6:
+	case 0xc7:
+	case 0xc8:
+	case 0xc9:
+	case 0xca:
+	case 0xcb:
+	case 0xcc:
+	case 0xcd:
+	case 0xce:
+	case 0xcf:
+	case 0xdc:
+	case 0xdd:
+	case 0xde:
+	case 0xdf:
+	case 0xec:
+	case 0xed:
+	case 0xee:
+	case 0xef:
+	case 0xf8:
+	case 0xf9:
+	case 0xfa:
+	case 0xfb:
+	case 0xfc:
+	case 0xfd:
+	  insn = load_byte (PC);
+	  insn <<= 16;
+	  insn |= load_half (PC + 1);
+	  extension = 0;
+	  dispatch (insn, extension, 3);
+	  break;
+
+	/* 3 byte insns without 16bit operand.  */
+	case 0xf5:
+	  insn = load_mem_big (PC, 3);
+	  extension = 0;
+	  dispatch (insn, extension, 3);
+	  break;
+
+	/* 4 byte insns.  */
+	case 0xf7:
+	  insn = inst;
+	  insn <<= 16;
+	  insn |= load_half (PC + 2);
+	  extension = 0;
+	  dispatch (insn, extension, 4);
+	  break;
+
+	case 0xf4:
+	  insn = inst;
+	  insn <<= 16;
+	  insn |= load_mem_big (PC + 4, 1) << 8;
+	  insn |= load_mem_big (PC + 3, 1);
+	  extension = load_mem_big (PC + 2, 1);
+	  dispatch (insn, extension, 5);
+	  break;
+
+	default:
+	  abort ();
+        }
+    }
+  while (!State.exception);
+
+#ifdef HASH_STAT
+  {
+    int i;
+    for (i = 0; i < MAX_HASH; i++)
+      {
+        struct hash_entry *h;
+	h = &hash_table[i];
+
+	printf("hash 0x%x:\n", i);
+
+	while (h)
+	  {
+	    printf("h->opcode = 0x%x, count = 0x%x\n", h->opcode, h->count);
+	    h = h->next;
+	  }
+
+	printf("\n\n");
+      }
+    fflush (stdout);
+  }
+#endif
+  
+}
+
+
+void
+sim_close (sd, quitting)
+     SIM_DESC sd;
+     int quitting;
+{
+  /* nothing to do */
+}
+
+int
+sim_trace (sd)
+     SIM_DESC sd;
+{
+#ifdef DEBUG
+  mn10200_debug = DEBUG;
+#endif
+  sim_resume (sd, 0, 0);
+  return 1;
+}
+
+void
+sim_info (sd, verbose)
+     SIM_DESC sd;
+     int verbose;
+{
+  (*mn10200_callback->printf_filtered) (mn10200_callback, "sim_info\n");
+}
+
+SIM_RC
+sim_create_inferior (sd, abfd, argv, env)
+     SIM_DESC sd;
+     struct _bfd *abfd;
+     char **argv;
+     char **env;
+{
+  if (abfd != NULL)
+    PC = bfd_get_start_address (abfd);
+  else
+    PC = 0;
+  return SIM_RC_OK;
+}
+
+void
+sim_set_callbacks (p)
+     host_callback *p;
+{
+  mn10200_callback = p;
+}
+
+/* All the code for exiting, signals, etc needs to be revamped.
+
+   This is enough to get c-torture limping though.  */
+
+void
+sim_stop_reason (sd, reason, sigrc)
+     SIM_DESC sd;
+     enum sim_stop *reason;
+     int *sigrc;
+{
+  if (State.exited)
+    *reason = sim_exited;
+  else
+    *reason = sim_stopped;
+  if (State.exception == SIGQUIT)
+    *sigrc = 0;
+  else
+    *sigrc = State.exception;
+}
+
+int
+sim_fetch_register (sd, rn, memory, length)
+     SIM_DESC sd;
+     int rn;
+     unsigned char *memory;
+     int length;
+{
+  put_word (memory, State.regs[rn]);
+  return -1;
+}
+ 
+int
+sim_store_register (sd, rn, memory, length)
+     SIM_DESC sd;
+     int rn;
+     unsigned char *memory;
+     int length;
+{
+  State.regs[rn] = get_word (memory);
+  return -1;
+}
+
+int
+sim_read (sd, addr, buffer, size)
+     SIM_DESC sd;
+     SIM_ADDR addr;
+     unsigned char *buffer;
+     int size;
+{
+  int i;
+  for (i = 0; i < size; i++)
+    buffer[i] = load_byte (addr + i);
+
+  return size;
+} 
+
+void
+sim_do_command (sd, cmd)
+     SIM_DESC sd;
+     char *cmd;
+{
+  (*mn10200_callback->printf_filtered) (mn10200_callback, "\"%s\" is not a valid mn10200 simulator command.\n", cmd);
+}
+
+SIM_RC
+sim_load (sd, prog, abfd, from_tty)
+     SIM_DESC sd;
+     char *prog;
+     bfd *abfd;
+     int from_tty;
+{
+  extern bfd *sim_load_file (); /* ??? Don't know where this should live.  */
+  bfd *prog_bfd;
+
+  prog_bfd = sim_load_file (sd, myname, mn10200_callback, prog, abfd,
+			    sim_kind == SIM_OPEN_DEBUG,
+			    0, sim_write);
+  if (prog_bfd == NULL)
+    return SIM_RC_FAIL;
+  if (abfd == NULL)
+    bfd_close (prog_bfd);
+  return SIM_RC_OK;
+} 
diff --git a/sim/mn10200/mn10200_sim.h b/sim/mn10200/mn10200_sim.h
new file mode 100644
index 00000000000..a7b7c4d888c
--- /dev/null
+++ b/sim/mn10200/mn10200_sim.h
@@ -0,0 +1,297 @@
+#include <stdio.h>
+#include <ctype.h>
+#include "ansidecl.h"
+#include "callback.h"
+#include "opcode/mn10200.h"
+#include <limits.h>
+#include "remote-sim.h"
+
+#ifndef INLINE
+#ifdef __GNUC__
+#define INLINE inline
+#else
+#define INLINE
+#endif
+#endif
+
+extern host_callback *mn10200_callback;
+
+#define DEBUG_TRACE		0x00000001
+#define DEBUG_VALUES		0x00000002
+
+extern int mn10200_debug;
+
+#ifdef __STDC__
+#define SIGNED signed
+#else
+#define SIGNED
+#endif
+
+#if UCHAR_MAX == 255
+typedef unsigned char uint8;
+typedef SIGNED char int8;
+#else
+error "Char is not an 8-bit type"
+#endif
+
+#if SHRT_MAX == 32767
+typedef unsigned short uint16;
+typedef SIGNED short int16;
+#else
+error "Short is not a 16-bit type"
+#endif
+
+#if INT_MAX == 2147483647
+
+typedef unsigned int uint32;
+typedef SIGNED int int32;
+
+#else
+#  if LONG_MAX == 2147483647
+
+typedef unsigned long uint32;
+typedef SIGNED long int32;
+
+#  else
+  error "Neither int nor long is a 32-bit type"
+#  endif
+#endif
+
+typedef uint32 reg_t;
+
+struct simops 
+{
+  long opcode;
+  long mask;
+  void (*func)();
+  int length;
+  int format;
+  int numops;
+  int operands[16];
+};
+
+/* The current state of the processor; registers, memory, etc.  */
+
+struct _state
+{
+  reg_t regs[11];		/* registers, d0-d3, a0-a3, pc, mdr, psw */
+  uint8 *mem;			/* main memory */
+  int exception;		/* Actually a signal number.  */
+  int exited;			/* Did the program exit? */
+} State;
+
+extern uint32 OP[4];
+extern struct simops Simops[];
+
+#define PC	(State.regs[8])
+
+#define PSW (State.regs[10])
+#define PSW_ZF 0x1
+#define PSW_NF 0x2
+#define PSW_CF 0x4
+#define PSW_VF 0x8
+#define PSW_ZX 0x10
+#define PSW_NX 0x20
+#define PSW_CX 0x40
+#define PSW_VX 0x80
+
+#define REG_D0 0
+#define REG_A0 4
+#define REG_SP 7
+#define REG_PC 8
+#define REG_MDR 9
+#define REG_PSW 10
+
+#define SEXT3(x)	((((x)&0x7)^(~0x3))+0x4)	
+
+/* sign-extend a 4-bit number */
+#define SEXT4(x)	((((x)&0xf)^(~0x7))+0x8)	
+
+/* sign-extend a 5-bit number */
+#define SEXT5(x)	((((x)&0x1f)^(~0xf))+0x10)	
+
+/* sign-extend an 8-bit number */
+#define SEXT8(x)	((((x)&0xff)^(~0x7f))+0x80)
+
+/* sign-extend a 9-bit number */
+#define SEXT9(x)	((((x)&0x1ff)^(~0xff))+0x100)
+
+/* sign-extend a 16-bit number */
+#define SEXT16(x)	((((x)&0xffff)^(~0x7fff))+0x8000)
+
+/* sign-extend a 22-bit number */
+#define SEXT22(x)	((((x)&0x3fffff)^(~0x1fffff))+0x200000)
+
+/* sign-extend a 24-bit number */
+#define SEXT24(x)	((((x)&0xffffff)^(~0x7fffff))+0x800000)
+
+#ifdef _WIN32
+#define SIGTRAP 5
+#define SIGQUIT 3
+#endif
+
+extern int max_mem;
+
+#define load_mem_big(addr,len) \
+  (len == 1 ? *(((addr) & 0xffffff) + State.mem) : \
+   len == 2 ? ((*(((addr) & 0xffffff) + State.mem) << 8) \
+	       | *((((addr) + 1) & 0xffffff) + State.mem)) : \
+   	      ((*(((addr) & 0xffffff) + State.mem) << 16) \
+	       | (*((((addr) + 1) & 0xffffff) + State.mem) << 8) \
+	       | *((((addr) + 2) & 0xffffff) + State.mem)))
+
+static INLINE uint32
+load_byte (addr)
+     SIM_ADDR addr;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  return p[0];
+}
+
+static INLINE uint32
+load_half (addr)
+     SIM_ADDR addr;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  return p[1] << 8 | p[0];
+}
+
+static INLINE uint32
+load_3_byte (addr)
+     SIM_ADDR addr;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  return p[2] << 16 | p[1] << 8 | p[0];
+}
+
+static INLINE uint32
+load_word (addr)
+     SIM_ADDR addr;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  return p[3] << 24 | p[2] << 16 | p[1] << 8 | p[0];
+}
+
+static INLINE uint32
+load_mem (addr, len)
+     SIM_ADDR addr;
+     int len;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  switch (len)
+    {
+    case 1:
+      return p[0];
+    case 2:
+      return p[1] << 8 | p[0];
+    case 3:
+      return p[2] << 16 | p[1] << 8 | p[0];
+    case 4:
+      return p[3] << 24 | p[2] << 16 | p[1] << 8 | p[0];
+    default:
+      abort ();
+    }
+}
+
+static INLINE void
+store_byte (addr, data)
+     SIM_ADDR addr;
+     uint32 data;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  p[0] = data;
+}
+
+static INLINE void
+store_half (addr, data)
+     SIM_ADDR addr;
+     uint32 data;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  p[0] = data;
+  p[1] = data >> 8;
+}
+
+static INLINE void
+store_3_byte (addr, data)
+     SIM_ADDR addr;
+     uint32 data;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  p[0] = data;
+  p[1] = data >> 8;
+  p[2] = data >> 16;
+}
+
+static INLINE void
+store_word (addr, data)
+     SIM_ADDR addr;
+     uint32 data;
+{
+  uint8 *p = (addr & 0xffffff) + State.mem;
+
+#ifdef CHECK_ADDR
+  if ((addr & 0xffffff) > max_mem)
+    abort ();
+#endif
+
+  p[0] = data;
+  p[1] = data >> 8;
+  p[2] = data >> 16;
+  p[3] = data >> 24;
+}
+
+/* Function declarations.  */
+
+uint32 get_word PARAMS ((uint8 *));
+void put_word PARAMS ((uint8 *, uint32));
+
+extern uint8 *map PARAMS ((SIM_ADDR addr));
diff --git a/sim/mn10200/simops.c b/sim/mn10200/simops.c
new file mode 100644
index 00000000000..ecceccae92f
--- /dev/null
+++ b/sim/mn10200/simops.c
@@ -0,0 +1,2449 @@
+#include "config.h"
+
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include "mn10200_sim.h"
+#include "simops.h"
+#include "targ-vals.h"
+#include "bfd.h"
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/times.h>
+#include <sys/time.h>
+
+#define REG0(X) ((X) & 0x3)
+#define REG1(X) (((X) & 0xc) >> 2)
+#define REG0_4(X) (((X) & 0x30) >> 4)
+#define REG0_8(X) (((X) & 0x300) >> 8)
+#define REG1_8(X) (((X) & 0xc00) >> 10)
+#define REG0_16(X) (((X) & 0x30000) >> 16)
+#define REG1_16(X) (((X) & 0xc0000) >> 18)
+#define TRUNC(X) ((X) & 0xffffff)
+
+/* mov imm8, dn */
+void OP_8000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_8 (insn)] = SEXT8 (insn & 0xff);
+}
+
+/* mov dn, dm */
+void OP_80 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = State.regs[REG_D0 + REG1 (insn)];
+}
+
+/* mov dm, an */
+void OP_F230 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0 (insn)] = State.regs[REG_D0 + REG1 (insn)];
+}
+
+/* mov an, dm */
+void OP_F2F0 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = State.regs[REG_A0 + REG1 (insn)];
+}
+
+/* mov an, am */
+void OP_F270 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0 (insn)] = State.regs[REG_A0 + REG1 (insn)];
+}
+
+/* mov psw, dn */
+void OP_F3F0 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = PSW & 0xffff;
+}
+
+/* mov dn, psw */
+void OP_F3D0 (insn, extension)
+     unsigned long insn, extension;
+{
+  PSW = State.regs[REG_D0 + REG1 (insn)] & 0xffff ;
+}
+
+/* mov mdr, dn */
+void OP_F3E0 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = State.regs[REG_MDR] & 0xffff;
+}
+
+/* mov dn, mdr */
+void OP_F3C0 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_MDR] = State.regs[REG_D0 + REG1 (insn)] & 0xffff;
+}
+
+/* mov (an), dm */
+void OP_20 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)]
+    = SEXT16 (load_half (State.regs[REG_A0 + REG1 (insn)]));
+}
+
+/* mov (d8,an), dm */
+void OP_6000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_8 (insn)]
+    = SEXT16 (load_half ((State.regs[REG_A0 + REG1_8 (insn)]
+			 + SEXT8 (insn & 0xff))));
+}
+
+/* mov (d16,an), dm */
+void OP_F7C00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT16 (load_half ((State.regs[REG_A0 + REG1_16 (insn)]
+	      + SEXT16 (insn & 0xffff))));
+}
+
+/* mov (d24,am), dn */
+void OP_F4800000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT16 (load_half ((State.regs[REG_A0 + REG1_16 (insn)]
+			 + SEXT24 (((insn & 0xffff) << 8) + extension))));
+}
+
+/* mov (di,an), dm */
+void OP_F140 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)]
+    = SEXT16 (load_half ((State.regs[REG_A0 + REG1 (insn)]
+			 + State.regs[REG_D0 + REG0_4 (insn)])));
+}
+
+/* mov (abs16), dn */
+void OP_C80000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)] = SEXT16 (load_half ((insn & 0xffff)));
+}
+
+/* mov (abs24), dn */
+void OP_F4C00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT16 (load_half ((((insn & 0xffff) << 8) + extension)));
+}
+
+/* mov (d8,an), am */
+void OP_7000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_8 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_8 (insn)]
+			 + SEXT8 (insn & 0xff))));
+}
+
+/* mov (d16,an), am */
+void OP_F7B00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			 + SEXT16 (insn & 0xffff))));
+}
+
+/* mov (d24,am), an */
+void OP_F4F00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			   + SEXT24 (((insn & 0xffff) << 8) + extension))));
+}
+
+/* mov (di,an), am */
+void OP_F100 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1 (insn)]
+			   + State.regs[REG_D0 + REG0_4 (insn)])));
+}
+
+/* mov (abs16), an */
+void OP_F7300000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)] = SEXT24 (load_3_byte ((insn & 0xffff)));
+}
+
+/* mov (abs24), an */
+void OP_F4D00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)]
+    = SEXT24 (load_3_byte ((((insn & 0xffff) << 8) + extension)));
+}
+
+/* mov dm, (an) */
+void OP_0 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half (State.regs[REG_A0 + REG1 (insn)],
+	      State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* mov dm, (d8,an) */
+void OP_4000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half (State.regs[REG_A0 + REG1_8 (insn)] + SEXT8 (insn & 0xff),
+	      State.regs[REG_D0 + REG0_8 (insn)]);
+}
+
+/* mov dm, (d16,an) */
+void OP_F7800000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half (State.regs[REG_A0 + REG1_16 (insn)] + SEXT16 (insn & 0xffff),
+	      State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* mov dm, (d24,am) */
+void OP_F4000000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half ((State.regs[REG_A0 + REG1_16 (insn)]
+	       + SEXT24 (((insn & 0xffff) << 8) + extension)),
+	      State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* mov dm, (di,an) */
+void OP_F1C0 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half ((State.regs[REG_A0 + REG1 (insn)]
+	       + State.regs[REG_D0 + REG0_4 (insn)]),
+	      State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* mov dn, (abs16) */
+void OP_C00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half ((insn & 0xffff), State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* mov dn, (abs24) */
+void OP_F4400000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_half (SEXT24 (((insn & 0xffff) << 8) + extension),
+	     State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* mov am, (d8,an) */
+void OP_5000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte (State.regs[REG_A0 + REG1_8 (insn)] + SEXT8 (insn & 0xff),
+		State.regs[REG_A0 + REG0_8 (insn)]);
+}
+
+/* mov am, (d16,an) */
+void OP_F7A00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte (State.regs[REG_A0 + REG1_16 (insn)] + SEXT16 (insn & 0xffff),
+		State.regs[REG_A0 + REG0_16 (insn)]);
+}
+
+/* mov am, (d24,an) */
+void OP_F4100000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+		 + SEXT24 (((insn & 0xffff) << 8) + extension)),
+		State.regs[REG_A0 + REG0_16 (insn)]);
+}
+
+/* mov am, (di,an) */
+void OP_F180 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte ((State.regs[REG_A0 + REG1 (insn)]
+	         + State.regs[REG_D0 + REG0_4 (insn)]),
+		State.regs[REG_A0 + REG0 (insn)]);
+}
+
+/* mov an, (abs16) */
+void OP_F7200000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte ((insn & 0xffff), State.regs[REG_A0 + REG0_16 (insn)]);
+}
+
+/* mov an, (abs24) */
+void OP_F4500000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte (SEXT24 (((insn & 0xffff) << 8) + extension),
+		State.regs[REG_A0 + REG0_16 (insn)]);
+}
+
+/* mov imm16, dn */
+void OP_F80000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)] = SEXT16 (insn & 0xffff);
+}
+
+/* mov imm24, dn */
+void OP_F4700000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT24 (((insn & 0xffff) << 8) + extension);
+}
+
+/* mov imm16, an */
+void OP_DC0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)] = insn & 0xffff;
+}
+
+/* mov imm24, an */
+void OP_F4740000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_A0 + REG0_16 (insn)]
+    = SEXT24 (((insn & 0xffff) << 8) + extension);
+}
+
+/* movx (d8,an), dm */
+void OP_F57000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_8 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_8 (insn)]
+			   + SEXT8 (insn & 0xff))));
+}
+
+/* movx (d16,an), dm */
+void OP_F7700000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			   + SEXT16 (insn & 0xffff))));
+}
+
+/* movx (d24,am), dn */
+void OP_F4B00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT24 (load_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			   + SEXT24 (((insn & 0xffff) << 8) + extension))));
+}
+
+/* movx dm, (d8,an) */
+void OP_F55000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte (State.regs[REG_A0 + REG1_8 (insn)] + SEXT8 (insn & 0xff),
+		State.regs[REG_D0 + REG0_8 (insn)]);
+}
+
+/* movx dm, (d16,an) */
+void OP_F7600000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte (State.regs[REG_A0 + REG1_16 (insn)] + SEXT16 (insn & 0xffff),
+		State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movx dm, (d24,am) */
+void OP_F4300000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_3_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+		 + SEXT24 (((insn & 0xffff) << 8) + extension)),
+		State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movb (d8,an), dm */
+void OP_F52000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_8 (insn)]
+    = SEXT8 (load_byte ((State.regs[REG_A0 + REG1_8 (insn)]
+			+ SEXT8 (insn & 0xff))));
+}
+
+/* movb (d16,an), dm */
+void OP_F7D00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT8 (load_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			+ SEXT16 (insn & 0xffff))));
+}
+
+/* movb (d24,am), dn */
+void OP_F4A00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT8 (load_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+			+ SEXT24 (((insn & 0xffff) << 8) + extension))));
+}
+
+/* movb (di,an), dm */
+void OP_F040 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)]
+    = SEXT8 (load_byte ((State.regs[REG_A0 + REG1 (insn)]
+			+ State.regs[REG_D0 + REG0_4 (insn)])));
+}
+
+/* mov (abs24), dn */
+void OP_F4C40000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = SEXT8 (load_byte ((((insn & 0xffff) << 8) + extension)));
+}
+
+/* movb dm, (an) */
+void OP_10 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte (State.regs[REG_A0 + REG1 (insn)],
+	      State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* movb dm, (d8,an) */
+void OP_F51000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte (State.regs[REG_A0 + REG1_8 (insn)] + SEXT8 (insn & 0xff),
+	      State.regs[REG_D0 + REG0_8 (insn)]);
+}
+
+/* movb dm, (d16,an) */
+void OP_F7900000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte (State.regs[REG_A0 + REG1_16 (insn)] + SEXT16 (insn & 0xffff),
+	      State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movb dm, (d24,am) */
+void OP_F4200000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+	      + SEXT24 (((insn & 0xffff) << 8) + extension)),
+	      State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movb dm, (di,an) */
+void OP_F0C0 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte ((State.regs[REG_A0 + REG1 (insn)]
+	      + State.regs[REG_D0 + REG0_4 (insn)]),
+	      State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* movb dn, (abs16) */
+void OP_C40000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte ((insn & 0xffff), State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movb dn, (abs24) */
+void OP_F4440000 (insn, extension)
+     unsigned long insn, extension;
+{
+  store_byte (SEXT24 (((insn & 0xffff) << 8) + extension),
+	     State.regs[REG_D0 + REG0_16 (insn)]);
+}
+
+/* movbu (an), dm */
+void OP_30 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)]
+    = load_byte (State.regs[REG_A0 + REG1 (insn)]);
+}
+
+/* movbu (d8,an), dm */
+void OP_F53000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_8 (insn)]
+    = load_byte ((State.regs[REG_A0 + REG1_8 (insn)] + SEXT8 (insn & 0xff)));
+}
+
+/* movbu (d16,an), dm */
+void OP_F7500000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = load_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+		  + SEXT16 (insn & 0xffff)));
+}
+
+/* movbu (d24,am), dn */
+void OP_F4900000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = load_byte ((State.regs[REG_A0 + REG1_16 (insn)]
+		  + SEXT24 (((insn & 0xffff) << 8) + extension)));
+}
+
+/* movbu (di,an), dm */
+void OP_F080 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)]
+    = load_byte ((State.regs[REG_A0 + REG1 (insn)]
+		  + State.regs[REG_D0 + REG0_4 (insn)]));
+}
+
+/* movbu (abs16), dn */
+void OP_CC0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)] = load_byte ((insn & 0xffff));
+}
+
+/* movbu (abs24), dn */
+void OP_F4C80000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0_16 (insn)]
+    = load_byte ((((insn & 0xffff) << 8) + extension));
+}
+
+/* ext dn */
+void OP_F3C1 (insn, extension)
+     unsigned long insn, extension;
+{
+  if (State.regs[REG_D0 + REG1 (insn)] & 0x8000)
+    State.regs[REG_MDR] = 0xffff;
+  else
+    State.regs[REG_MDR] = 0;
+}
+
+/* extx dn */
+void OP_B0 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = SEXT16 (State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* extxu dn */
+void OP_B4 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = State.regs[REG_D0 + REG0 (insn)] & 0xffff;
+}
+
+/* extxb dn */
+void OP_B8 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = SEXT8 (State.regs[REG_D0 + REG0 (insn)]);
+}
+
+/* extxbu dn */
+void OP_BC (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_D0 + REG0 (insn)] = State.regs[REG_D0 + REG0 (insn)] & 0xff;
+}
+
+/* add dn,dm */
+void OP_90 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg1 + reg2);
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (reg2 & 0xffff));
+  cx = (value < reg1) || (value < reg2);
+  v = ((reg2 & 0x8000) == (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) == (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add dm, an */
+void OP_F200 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg1 + reg2);
+  State.regs[REG_A0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (reg2 & 0xffff));
+  cx = (value < reg1) || (value < reg2);
+  v = ((reg2 & 0x8000) == (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) == (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add an, dm */
+void OP_F2C0 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg1 + reg2);
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (reg2 & 0xffff));
+  cx = (value < reg1) || (value < reg2);
+  v = ((reg2 & 0x8000) == (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) == (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add an,am */
+void OP_F240 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg1 + reg2);
+  State.regs[REG_A0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (reg2 & 0xffff));
+  cx = (value < reg1) || (value < reg2);
+  v = ((reg2 & 0x8000) == (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) == (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm8, dn */
+void OP_D400 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_8 (insn)]);
+  imm = TRUNC (SEXT8 (insn & 0xff));
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_D0 + REG0_8 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm16, dn */
+void OP_F7180000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (SEXT16 (insn & 0xffff));
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_D0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm24,dn */
+void OP_F4600000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_D0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm8, an */
+void OP_D000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_8 (insn)]);
+  imm = TRUNC (SEXT8 (insn & 0xff));
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_A0 + REG0_8 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm16, an */
+void OP_F7080000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (SEXT16 (insn & 0xffff));
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_A0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* add imm24, an */
+void OP_F4640000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 + imm);
+  State.regs[REG_A0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff)) || ((value & 0xffff) < (imm & 0xffff));
+  cx = (value < reg1) || (value < imm);
+  v = ((reg1 & 0x8000) == (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) == (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* addc dm,dn */
+void OP_F280 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg1 + reg2 + ((PSW & PSW_CF) != 0));
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((value & 0xffff) < (reg1 & 0xffff))
+       || ((value & 0xffff) < (reg2 & 0xffff));
+  cx = (value < reg1) || (value < reg2);
+  v = ((reg2 & 0x8000) == (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) == (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* addnf imm8, an */
+void OP_F50C00 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long reg1, imm, value;
+
+  reg1 = State.regs[REG_A0 + REG0_8 (insn)];
+  imm = SEXT8 (insn & 0xff);
+  value = reg1 + imm;
+  State.regs[REG_A0 + REG0_8 (insn)] = TRUNC (value);
+}
+
+/* sub dn, dm */
+void OP_A0 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub dm, an */
+void OP_F210 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+  State.regs[REG_A0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub an, dm */
+void OP_F2D0 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub an, am */
+void OP_F250 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+  State.regs[REG_A0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub imm16, dn */
+void OP_F71C0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (SEXT16 (insn & 0xffff));
+  value = TRUNC (reg1 - imm);
+  State.regs[REG_D0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub imm24, dn */
+void OP_F4680000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 - imm);
+  State.regs[REG_D0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub imm16, an */
+void OP_F70C0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (SEXT16 (insn & 0xffff));
+  value = TRUNC (reg1 - imm);
+  State.regs[REG_A0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* sub imm24, an */
+void OP_F46C0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 - imm);
+  State.regs[REG_A0 + REG0_16 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* subc dm, dn */
+void OP_F290 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1 - ((PSW & PSW_CF) != 0));
+  State.regs[REG_D0 + REG0 (insn)] = value;
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* mul dn, dm */
+void OP_F340 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int n, z;
+
+  temp = (SEXT16 (State.regs[REG_D0 + REG0 (insn)] & 0xffff)
+          *  SEXT16 ((State.regs[REG_D0 + REG1 (insn)] & 0xffff)));
+  State.regs[REG_D0 + REG0 (insn)] = temp & 0xffffff;
+  State.regs[REG_MDR] = temp >> 16;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* mulu dn, dm */
+void OP_F350 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int n, z;
+
+  temp = ((State.regs[REG_D0 + REG0 (insn)] & 0xffff)
+          *  (State.regs[REG_D0 + REG1 (insn)] & 0xffff));
+  State.regs[REG_D0 + REG0 (insn)] = temp & 0xffffff;
+  State.regs[REG_MDR] = temp >> 16;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+
+/* divu dm, dn */
+void OP_F360 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int n, z;
+
+  temp = State.regs[REG_MDR];
+  temp &= 0xffff;
+  temp <<= 16;
+  temp |= (State.regs[REG_D0 + REG0 (insn)] & 0xffff);
+  State.regs[REG_MDR] = (temp
+			  % (unsigned long)(State.regs[REG_D0 + REG1 (insn)] & 0xffff));
+  temp /= (unsigned long)(State.regs[REG_D0 + REG1 (insn)] & 0xffff);
+  State.regs[REG_D0 + REG0 (insn)] = temp & 0xffff;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* cmp imm8, dn */
+void OP_D800 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_8 (insn)]);
+  imm = TRUNC (SEXT8 (insn & 0xff));
+  value = TRUNC (reg1 - imm);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+}
+
+/* cmp dn, dm */
+void OP_F390 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp dm, an */
+void OP_F220 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp an, dm */
+void OP_F2E0 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_D0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp an, am */
+void OP_F260 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, reg2, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG1 (insn)]);
+  reg2 = TRUNC (State.regs[REG_A0 + REG0 (insn)]);
+  value = TRUNC (reg2 - reg1);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) > (reg2 & 0xffff));
+  cx = (reg1 > reg2);
+  v = ((reg2 & 0x8000) != (reg1 & 0x8000)
+       && (reg2 & 0x8000) != (value & 0x8000));
+  vx = ((reg2 & 0x800000) != (reg1 & 0x800000)
+        && (reg2 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp imm16, dn */
+void OP_F7480000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (SEXT16 (insn & 0xffff));
+  value = TRUNC (reg1 - imm);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp imm24, dn */
+void OP_F4780000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_D0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 - imm);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp imm16, an */
+void OP_EC0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (insn & 0xffff);
+  value = TRUNC (reg1 - imm);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* cmp imm24, an */
+void OP_F47C0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, c, n, v, zx, cx, nx, vx;
+  unsigned long reg1, imm, value;
+
+  reg1 = TRUNC (State.regs[REG_A0 + REG0_16 (insn)]);
+  imm = TRUNC (((insn & 0xffff) << 8) + extension);
+  value = TRUNC (reg1 - imm);
+
+  z = ((value & 0xffff) == 0);
+  zx = (value == 0);
+  n = (value & 0x8000);
+  nx = (value & 0x800000);
+  c = ((reg1 & 0xffff) < (imm & 0xffff));
+  cx = (reg1 < imm);
+  v = ((reg1 & 0x8000) != (imm & 0x8000)
+       && (reg1 & 0x8000) != (value & 0x8000));
+  vx = ((reg1 & 0x800000) != (imm & 0x800000)
+        && (reg1 & 0x800000) != (value & 0x800000));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF
+	   | PSW_ZX | PSW_NX | PSW_CX | PSW_VX);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0)
+	  | (zx ? PSW_ZX : 0) | (nx ? PSW_NX : 0)
+	  | (cx ? PSW_CX : 0) | (vx ? PSW_VX : 0));
+
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | ( n ? PSW_NF : 0)
+	  | (c ? PSW_CF : 0) | (v ? PSW_VF : 0));
+}
+
+/* and dn, dm */
+void OP_F300 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0 (insn)] & State.regs[REG_D0 + REG1 (insn)];
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* and imm8, dn */
+void OP_F50000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0_8 (insn)] & (insn & 0xff);
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0_8 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0_8 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0_8 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0_8 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* and imm16, dn */
+void OP_F7000000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0_16 (insn)] & (insn & 0xffff);
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0_16 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0_16 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* and imm16, psw */
+void OP_F7100000 (insn, extension)
+     unsigned long insn, extension;
+{
+  PSW &= (insn & 0xffff);
+}
+
+/* or dn, dm */
+void OP_F310 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0 (insn)] | State.regs[REG_D0 + REG1 (insn)];
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* or imm8, dn */
+void OP_F50800 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0_8 (insn)] | (insn & 0xff);
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0_8 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0_8 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0_8 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0_8 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* or imm16, dn */
+void OP_F7400000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0_16 (insn)] | (insn & 0xffff);
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0_16 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0_16 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* or imm16, psw */
+void OP_F7140000 (insn, extension)
+     unsigned long insn, extension;
+{
+  PSW |= (insn & 0xffff);
+}
+
+/* xor dn, dm */
+void OP_F320 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0 (insn)] ^ State.regs[REG_D0 + REG1 (insn)];
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* xor imm16, dn */
+void OP_F74C0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = State.regs[REG_D0 + REG0_16 (insn)] ^ (insn & 0xffff);
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0_16 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0_16 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0_16 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* not dn */
+void OP_F3E4 (insn, extension)
+     unsigned long insn, extension;
+{
+  int n, z;
+  unsigned long temp;
+
+  temp = ~State.regs[REG_D0 + REG0 (insn)];
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0));
+}
+
+/* asr dn */
+void OP_F338 (insn, extension)
+     unsigned long insn, extension;
+{
+  long temp;
+  int z, n, c, high;
+
+  temp = State.regs[REG_D0 + REG0 (insn)] & 0xffff;
+  c = temp & 1;
+  high = temp & 0x8000;
+  temp >>= 1;
+  temp |= high;
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0) | (c ? PSW_CF : 0));
+}
+
+/* lsr dn */
+void OP_F33C (insn, extension)
+     unsigned long insn, extension;
+{
+  int z, n, c;
+  long temp;
+
+  temp = State.regs[REG_D0 + REG0 (insn)] & 0xffff;
+  c = temp & 1;
+  temp >>= 1;
+  temp &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= temp;
+  z = (State.regs[REG_D0 + REG0 (insn)] & 0xffff) == 0;
+  n = (State.regs[REG_D0 + REG0 (insn)] & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0) | (c ? PSW_CF : 0));
+}
+
+/* ror dn */
+void OP_F334 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long value;
+  int c,n,z;
+
+  value = State.regs[REG_D0 + REG0 (insn)] & 0xffff;
+  c = (value & 0x1);
+
+  value >>= 1;
+  value |= (PSW & PSW_CF ? 0x8000 : 0);
+  value &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= value;
+  z = (value == 0);
+  n = (value & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0) | (c ? PSW_CF : 0));
+}
+
+/* rol dn */
+void OP_F330 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long value;
+  int c,n,z;
+
+  value = State.regs[REG_D0 + REG0 (insn)] & 0xffff;
+  c = (value & 0x8000) ? 1 : 0;
+
+  value <<= 1;
+  value |= (PSW & PSW_CF ? 0x1 : 0);
+  value &= 0xffff;
+  State.regs[REG_D0 + REG0 (insn)] &= ~0xffff;
+  State.regs[REG_D0 + REG0 (insn)] |= value;
+  z = (value == 0);
+  n = (value & 0x8000) != 0;
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= ((z ? PSW_ZF : 0) | (n ? PSW_NF : 0) | (c ? PSW_CF : 0));
+}
+
+/* btst imm8, dn */
+void OP_F50400 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int z;
+
+  temp = State.regs[REG_D0 + REG0_8 (insn)];
+  temp &= (insn & 0xff);
+  z = (temp == 0);
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= (z ? PSW_ZF : 0);
+}
+
+/* btst imm16, dn */
+void OP_F7040000 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int z, n, c;
+
+  temp = State.regs[REG_D0 + REG0_16 (insn)];
+  c = temp & 0x1;
+  temp &= (insn & 0xffff);
+  n = (temp & 0x8000) != 0;
+  z = (temp == 0);
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= (z ? PSW_ZF : 0) | (n ? PSW_NF : 0) | (c ? PSW_CF : 0);
+}
+
+/* bset dm, (an) */
+void OP_F020 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int z;
+
+  temp = load_byte (State.regs[REG_A0 + REG1 (insn)]);
+  z = (temp & State.regs[REG_D0 + REG0 (insn)]) == 0;
+  temp |= State.regs[REG_D0 + REG0 (insn)];
+  store_byte (State.regs[REG_A0 + REG1 (insn)], temp);
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= (z ? PSW_ZF : 0);
+}
+
+/* bclr dm, (an) */
+void OP_F030 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned long temp;
+  int z;
+
+  temp = load_byte (State.regs[REG_A0 + REG1 (insn)]);
+  z = (temp & State.regs[REG_D0 + REG0 (insn)]) == 0;
+  temp = temp & ~State.regs[REG_D0 + REG0 (insn)];
+  store_byte (State.regs[REG_A0 + REG1 (insn)], temp);
+  PSW &= ~(PSW_ZF | PSW_NF | PSW_CF | PSW_VF);
+  PSW |= (z ? PSW_ZF : 0);
+}
+
+/* beqx label:8 */
+void OP_F5E800 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_ZX)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bnex label:8 */
+void OP_F5E900 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_ZX))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bgtx label:8 */
+void OP_F5E100 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!((PSW & PSW_ZX)
+        || (((PSW & PSW_NX) != 0) ^ ((PSW & PSW_VX) != 0))))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bgex label:8 */
+void OP_F5E200 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(((PSW & PSW_NX) != 0) ^ ((PSW & PSW_VX) != 0)))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* blex label:8 */
+void OP_F5E300 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if ((PSW & PSW_ZX)
+       || (((PSW & PSW_NX) != 0) ^ ((PSW & PSW_VX) != 0)))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bltx label:8 */
+void OP_F5E000 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (((PSW & PSW_NX) != 0) ^ ((PSW & PSW_VX) != 0))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bhix label:8 */
+void OP_F5E500 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(((PSW & PSW_CX) != 0) || (PSW & PSW_ZX) != 0))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bccx label:8 */
+void OP_F5E600 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_CX))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* blsx label:8 */
+void OP_F5E700 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (((PSW & PSW_CX) != 0) || (PSW & PSW_ZX) != 0)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bcsx label:8 */
+void OP_F5E400 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_CX)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bvcx label:8 */
+void OP_F5EC00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_VX))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bvsx label:8 */
+void OP_F5ED00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_VX)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bncx label:8 */
+void OP_F5EE00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_NX))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bnsx label:8 */
+void OP_F5EF00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_NX)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* beq label:8 */
+void OP_E800 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_ZF)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bne label:8 */
+void OP_E900 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_ZF))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bgt label:8 */
+void OP_E100 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (!((PSW & PSW_ZF)
+        || (((PSW & PSW_NF) != 0) ^ ((PSW & PSW_VF) != 0))))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bge label:8 */
+void OP_E200 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (!(((PSW & PSW_NF) != 0) ^ ((PSW & PSW_VF) != 0)))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* ble label:8 */
+void OP_E300 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if ((PSW & PSW_ZF)
+       || (((PSW & PSW_NF) != 0) ^ ((PSW & PSW_VF) != 0)))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* blt label:8 */
+void OP_E000 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (((PSW & PSW_NF) != 0) ^ ((PSW & PSW_VF) != 0))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bhi label:8 */
+void OP_E500 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (!(((PSW & PSW_CF) != 0) || (PSW & PSW_ZF) != 0))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bcc label:8 */
+void OP_E600 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_CF))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bls label:8 */
+void OP_E700 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (((PSW & PSW_CF) != 0) || (PSW & PSW_ZF) != 0)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bcs label:8 */
+void OP_E400 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_CF)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bvc label:8 */
+void OP_F5FC00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_VF))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bvs label:8 */
+void OP_F5FD00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_VF)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bnc label:8 */
+void OP_F5FE00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (!(PSW & PSW_NF))
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bns label:8 */
+void OP_F5FF00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 3 after we return, so
+     we subtract two here to make things right.  */
+  if (PSW & PSW_NF)
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* bra label:8 */
+void OP_EA00 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* The dispatching code will add 2 after we return, so
+     we subtract two here to make things right.  */
+    State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT8 (insn & 0xff));
+}
+
+/* jmp (an) */
+void OP_F000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_PC] = TRUNC (State.regs[REG_A0 + REG1 (insn)] - 2);
+}
+
+/* jmp label:16 */
+void OP_FC0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT16 (insn & 0xffff));
+}
+
+/* jmp label:24 */
+void OP_F4E00000 (insn, extension)
+     unsigned long insn, extension;
+{
+  State.regs[REG_PC]
+    = TRUNC (State.regs[REG_PC] + (((insn & 0xffff) << 8) + extension));
+}
+
+/* jsr (an) */
+void OP_F001 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned int next_pc, sp;
+
+  sp = State.regs[REG_SP];
+  sp -= 4;
+  State.regs[REG_SP] = sp;
+  next_pc = State.regs[REG_PC] + 2;
+  State.mem[sp] = next_pc & 0xff;
+  State.mem[sp+1] = (next_pc & 0xff00) >> 8;
+  State.mem[sp+2] = (next_pc & 0xff0000) >> 16;
+  State.regs[REG_PC] = TRUNC (State.regs[REG_A0 + REG1 (insn)] - 2);
+}
+
+/* jsr label:16 */
+void OP_FD0000 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned int next_pc, sp;
+
+  sp = State.regs[REG_SP];
+  sp -= 4;
+  State.regs[REG_SP] = sp;
+  next_pc = State.regs[REG_PC] + 3;
+  State.mem[sp] = next_pc & 0xff;
+  State.mem[sp+1] = (next_pc & 0xff00) >> 8;
+  State.mem[sp+2] = (next_pc & 0xff0000) >> 16;
+  State.regs[REG_PC] = TRUNC (State.regs[REG_PC] + SEXT16 (insn & 0xffff));
+}
+
+/* jsr label:24 */
+void OP_F4E10000 (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned int next_pc, sp;
+
+  sp = State.regs[REG_SP];
+  sp -= 4;
+  State.regs[REG_SP] = sp;
+  next_pc = State.regs[REG_PC] + 5;
+  State.mem[sp] = next_pc & 0xff;
+  State.mem[sp+1] = (next_pc & 0xff00) >> 8;
+  State.mem[sp+2] = (next_pc & 0xff0000) >> 16;
+  State.regs[REG_PC]
+    = TRUNC (State.regs[REG_PC] + (((insn & 0xffff) << 8) + extension));
+}
+
+/* rts */
+void OP_FE (insn, extension)
+     unsigned long insn, extension;
+{
+  unsigned int sp;
+
+  sp = State.regs[REG_SP];
+  State.regs[REG_PC] = (State.mem[sp] | (State.mem[sp+1] << 8)
+	      | (State.mem[sp+2] << 16));
+  State.regs[REG_PC] -= 1;
+  State.regs[REG_SP] += 4;
+}
+
+/* rti */
+void OP_EB (insn, extension)
+     unsigned long insn, extension;
+{
+  PSW = load_half (State.regs[REG_A0 + 3]);
+  State.regs[REG_PC] = load_3_byte (State.regs[REG_A0 + 3] + 2) - 1;
+  State.regs[REG_A0 + 3] += 6;
+}
+
+/* syscall */
+void OP_F010 (insn, extension)
+     unsigned long insn, extension;
+{
+  /* We use this for simulated system calls; we may need to change
+     it to a reserved instruction if we conflict with uses at
+     Matsushita.  */
+  int save_errno = errno;	
+  int offset = 6;
+  errno = 0;
+
+/* Registers passed to syscall 0 */
+
+/* Function number.  */
+#define FUNC   (State.regs[0])
+
+#define PARM1  (State.regs[1])
+
+/* Parameters.  */
+#define PARM(x, y) (load_mem (State.regs[REG_SP] + x, y))
+
+/* Registers set by syscall 0 */
+
+#define RETVAL State.regs[0]	/* return value */
+#define RETERR State.regs[1]	/* return error code */
+
+/* Turn a pointer in a register into a pointer into real memory. */
+
+#define MEMPTR(x) (State.mem + (x & 0xffffff))
+
+  switch (FUNC)
+    {
+#if !defined(__GO32__) && !defined(_WIN32)
+#ifdef TARGET_SYS_fork
+      case TARGET_SYS_fork:
+      RETVAL = fork ();
+      break;
+#endif
+#ifdef TARGET_SYS_execve
+    case TARGET_SYS_execve:
+      RETVAL = execve (MEMPTR (PARM1), (char **) MEMPTR (PARM (4, 4)),
+		       (char **)MEMPTR (PARM (8, 4)));
+      break;
+#endif
+#ifdef TARGET_SYS_execv
+    case TARGET_SYS_execv:
+      RETVAL = execve (MEMPTR (PARM1), (char **) MEMPTR (PARM (4, 4)), NULL);
+      break;
+#endif
+#endif
+
+    case TARGET_SYS_read:
+      RETVAL = mn10200_callback->read (mn10200_callback, PARM1, 
+				       MEMPTR (PARM (4, 4)), PARM (8, 4));
+      break;
+    case TARGET_SYS_write:
+      RETVAL = (int)mn10200_callback->write (mn10200_callback, PARM1,
+					     MEMPTR (PARM (4, 4)),
+					     PARM (8, 4));
+      break;
+    case TARGET_SYS_lseek:
+      RETVAL = mn10200_callback->lseek (mn10200_callback, PARM1,
+					PARM (4, 4), PARM (8, 2));
+      break;
+    case TARGET_SYS_close:
+      RETVAL = mn10200_callback->close (mn10200_callback, PARM1);
+      break;
+    case TARGET_SYS_open:
+      RETVAL = mn10200_callback->open (mn10200_callback, MEMPTR (PARM1),
+				       PARM (4, 2));
+      break;
+    case TARGET_SYS_exit:
+      /* EXIT - caller can look in PARM1 to work out the 
+	 reason */
+      if (PARM1 == 0xdead)
+	State.exception = SIGABRT;
+      else
+	State.exception = SIGQUIT;
+      State.exited = 1;
+      break;
+
+    case TARGET_SYS_stat:	/* added at hmsi */
+      /* stat system call */
+      {
+	struct stat host_stat;
+	reg_t buf;
+
+	RETVAL = stat (MEMPTR (PARM1), &host_stat);
+	
+	buf = PARM (4, 4);
+
+	/* Just wild-assed guesses.  */
+	store_half (buf, host_stat.st_dev);
+	store_half (buf + 2, host_stat.st_ino);
+	store_word (buf + 4, host_stat.st_mode);
+	store_half (buf + 8, host_stat.st_nlink);
+	store_half (buf + 10, host_stat.st_uid);
+	store_half (buf + 12, host_stat.st_gid);
+	store_half (buf + 14, host_stat.st_rdev);
+	store_word (buf + 16, host_stat.st_size);
+	store_word (buf + 20, host_stat.st_atime);
+	store_word (buf + 28, host_stat.st_mtime);
+	store_word (buf + 36, host_stat.st_ctime);
+      }
+      break;
+
+#ifdef TARGET_SYS_chown
+    case TARGET_SYS_chown:
+      RETVAL = chown (MEMPTR (PARM1), PARM (4, 2), PARM (6, 2));
+      break;
+#endif
+    case TARGET_SYS_chmod:
+      RETVAL = chmod (MEMPTR (PARM1), PARM (4, 2));
+      break;
+#ifdef TARGET_SYS_time
+    case TARGET_SYS_time:
+      RETVAL = time ((time_t *)MEMPTR (PARM1));
+      break;
+#endif
+#ifdef TARGET_SYS_times
+    case TARGET_SYS_times:
+      {
+	struct tms tms;
+	RETVAL = times (&tms);
+	store_word (PARM1, tms.tms_utime);
+	store_word (PARM1 + 4, tms.tms_stime);
+	store_word (PARM1 + 8, tms.tms_cutime);
+	store_word (PARM1 + 12, tms.tms_cstime);
+	break;
+      }
+#endif
+#ifdef TARGET_SYS_gettimeofday
+    case TARGET_SYS_gettimeofday:
+      {
+	struct timeval t;
+	struct timezone tz;
+	RETVAL = gettimeofday (&t, &tz);
+	store_word (PARM1, t.tv_sec);
+	store_word (PARM1 + 4, t.tv_usec);
+	store_word (PARM (4, 4), tz.tz_minuteswest);
+	store_word (PARM (4, 4) + 4, tz.tz_dsttime);
+	break;
+      }
+#endif
+#ifdef TARGET_SYS_utime
+    case TARGET_SYS_utime:
+      /* Cast the second argument to void *, to avoid type mismatch
+	 if a prototype is present.  */
+      RETVAL = utime (MEMPTR (PARM1), (void *) MEMPTR (PARM (4, 4)));
+      break;
+#endif
+    default:
+      abort ();
+    }
+  RETERR = errno;
+  errno = save_errno;
+}
+
+/* nop */
+void OP_F6 (insn, extension)
+     unsigned long insn, extension;
+{
+}
+
+/* breakpoint */
+void
+OP_FF (insn, extension)
+     unsigned long insn, extension;
+{
+  State.exception = SIGTRAP;
+  PC -= 1;
+}