diff options
61 files changed, 6430 insertions, 3886 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 5aa6fbdef8e..579d4bd731f 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,132 @@ +1999-05-10 Martin Hunt <hunt@cygnus.com> + + * debugify.c, debugify.h: Removed because they are no + longer used. + +1999-05-08 Jim Blandy <jimb@zwingli.cygnus.com> + + * infrun.c (_initialize_infrun): Handle TARGET_SIGNAL_LWP, + TARGET_SIGNAL_WAITING, and TARGET_SIGNAL_CANCEL like SIGALRM or + SIGIO --- pass them through to the inferior silently. + * target.h (enum target_signals): Add TARGET_SIGNAL_CANCEL, for + Solaris's SIGCANCEL. + * target.c (target_signal_from_host, target_signal_to_host): Add + mapping between SIGCANCEL and TARGET_SIGNAL_CANCEL. + (signals): Add entry for SIGCANCEL. + +1999-05-07 Stan Shebs <shebs@andros.cygnus.com> + + After years of talking about it, finally break up the + wait_for_inferior loop. + * infrun.c (struct execution_control_state): New struct, + holds what used to be local vars governing wfi behavior. + (init_execution_control_state): New function, was code in + wfi that set up execution control state. + (handle_inferior_event): New function, was body of main + wfi loop. Rewrite all local var references to go through + the ecs structure passed into this function. + (wait_for_inferior): Rewrite to set up and use execution control + state, and to call the new functions. + (currently_stepping): New function, was the macro + CURRENTLY_STEPPING. + (enum infwait_states): Rename from wfi_states. + (infwait_normal_state, etc): Similarly. + +Thu May 6 15:25:32 1999 Philippe De Muyter <phdm@macqel.be> + + * coffread.c (coff_symtab_read): Call `record_line' with the line + number of the ".bf" symbol only for one-line functions. + +1999-05-06 Michael Snyder <msnyder@cleaver.cygnus.com> + + * Makefile.in: thread.o depends on target.h. + +1999-05-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * event-top.c (change_line_handler): Use POLLIN instead of + POLLRDNORM, for compatibility with Linux. + (setup_event_loop): Ditto. + +1999-05-06 Jim Blandy <jimb@zwingli.cygnus.com> + + * mips-tdep.c (heuristic_proc_start): Rewrite cryptic error + message about hitting the "heuristic fence post" with something + that actually gives the user a fighting chance of figuring out + why GDB is unhappy. + +1999-05-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * top.c: Include event-loop.h. + (init_main): Add async version of 'set prompt' command. + If in async mode define the editing and annotate set + commands in a different way. + Initialize new variable asyn_command_editing_p to 1. + Initialize the gdb prompt for async mode. + (quit_cover): Make not static, for use by the event loop. + (gdb_init): Call async_init_signals for the asynchronous case. + (source_line_number, source_file_name, source_error, + source_pre_error, history_expansion_p): Make non-static, so + event-top.c can use them. + (command_loop_marker): Make non-static, for use in event-top.c. + Include event-loop.h. + + * top.h: Add prototype for async_init_signals. + (SET_TOP_LEVEL): Move here from main.c. + Add setup_event_loop to exported functions. + + * defs.h: Add async_hook to exported variables. + + * main.c (SET_TOP_LEVEL): Move to top.h, so that it is visible in + event-loop.c. Add new global variable async to determine whether + we are running in async mode or not. + (main): Add support for --async switch. Use async_hook to call + setup_event_loop, when running in async mode. + + * event-top.c: New file. Gdb input line handler and command line + handler for the event loop. Initialization of signal handlers. + All the handled signals have handlers called handle_<signalname>. + Set up all the appropriate tokens for asynchronous signal + handling. + + * event-loop.h: New file. Data structures and definitions for the + event loop. + + * event-loop.c: New file. Functions for the event loop + implementation. + + * config.in: Regenerate with autoheader. + + * configure.in (AC_CHECK_FUNCS): Add poll to list of functions + to be checked for. + + * configure: Regenerate. + + * Makefile.in (SFILES): Add new source files. + (eventloop_h): Define. + (COMMON_OBS): Add new object files. + (event-loop.o): Add rule for target object. + (event-top.o): Ditto. + +1999-05-05 Stan Shebs <shebs@andros.cygnus.com> + + * infrun.c (wait_for_inferior): Transform breaks and continues + into gotos, move the target_wait to the very top of the loop. + +1999-05-05 Jonathan Larmour <jlarmour@cygnus.co.uk> + + * configure.in: Ensure that GDB links with libuser32.a under + cygwin because libreadline requires it. + * Makefile.in (WIN32LIBS): Substitute in result from configure + * configure: regenerate + +1999-05-04 Jim Blandy <jimb@zwingli.cygnus.com> + + Fix from John Rigby. Richard Henderson says it seems okay. + * alpha-tdep.c (PROC_DUMMY_FRAME): As long as we're abusing fields + of (proc)->pdr, we ought to at least abuse one large enough to + hold the value we're trying to store in it. iopt is only 32 bits + wide; cbLineOffset is a bfd_vma. + 1999-05-04 DJ Delorie <dj@cygnus.com> DJGPP changes from Robert Hoehne <robert.hoehne@gmx.net> diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 308bbb8059e..33d27602ffd 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -148,6 +148,8 @@ OPCODES_CFLAGS = -I$(OP_INCLUDE) # should set this to list all the .o or .a files to be linked in. SIM = +WIN32LIBS = @WIN32LIBS@ + ENABLE_CFLAGS= @ENABLE_CFLAGS@ @@ -217,7 +219,7 @@ CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \ ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES) -VERSION = 19990504 +VERSION = 19990510 DIST=gdb LINT=/usr/5bin/lint @@ -368,6 +370,7 @@ SFILES = ax-general.c ax-gdb.c bcache.c blockframe.c breakpoint.c \ ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \ command.c complaints.c corefile.c cp-valprint.c dbxread.c \ demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \ + event-loop.c event-top.c \ expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \ findvar.c gdbarch.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \ jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \ @@ -436,6 +439,7 @@ defs_h = defs.h xm.h tm.h nm.h config.status config.h gdbarch.h inferior_h = inferior.h $(breakpoint_h) tracepoint_h = tracepoint.h ax_h = ax.h +event_loop_h = event-loop.h # Header files that need to have srcdir added. Note that in the cases # where we use a macro like $(gdbcmd_h), things are carefully arranged @@ -491,7 +495,9 @@ TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR) COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \ source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \ symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \ - expprint.o environ.o gdbarch.o gdbtypes.o copying.o $(DEPFILES) \ + expprint.o environ.o \ + event-loop.o event-top.o \ + gdbarch.o gdbtypes.o copying.o $(DEPFILES) \ mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \ exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \ dbxread.o coffread.o elfread.o \ @@ -1101,6 +1107,11 @@ eval.o: eval.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \ $(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \ gdb_string.h +event-loop.o: event-loop.c $(event_loop_h) + +event-top.o: event-top.c top.h $(readline_headers) \ + $(defs_h) $(inferior_h) $(event_loop_h) + exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \ target.h language.h gdb_string.h @@ -1545,11 +1556,11 @@ tic80-tdep.o: tic80-tdep.c $(defs_h) target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \ objfiles.h symfile.h target.h gdb_string.h -thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h) +thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h) target.h top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \ $(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \ - $(remote_utils_h) gdb_string.h + $(remote_utils_h) gdb_string.h $(event_loop_h) typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \ $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \ diff --git a/gdb/coffread.c b/gdb/coffread.c index 56c1438b239..ae1decaf728 100644 --- a/gdb/coffread.c +++ b/gdb/coffread.c @@ -764,6 +764,7 @@ coff_symtab_read (symtab_offset, nsyms, section_offsets, objfile) char *filestring = ""; int depth = 0; int fcn_first_line = 0; + CORE_ADDR fcn_first_line_addr; int fcn_last_line = 0; int fcn_start_addr = 0; long fcn_line_ptr = 0; @@ -1020,6 +1021,7 @@ coff_symtab_read (symtab_offset, nsyms, section_offsets, objfile) if (cs->c_naux != 1) complain (&bf_no_aux_complaint, cs->c_symnum); fcn_first_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno; + fcn_first_line_addr = cs->c_value; /* Might want to check that locals are 0 and context_stack_depth is zero, and complain if not. */ @@ -1030,7 +1032,6 @@ coff_symtab_read (symtab_offset, nsyms, section_offsets, objfile) new->name = process_coff_symbol (&fcn_cs_saved, &fcn_aux_saved, section_offsets, objfile); - record_line (current_subfile, fcn_first_line, cs->c_value); } else if (STREQ (cs->c_name, ".ef")) { @@ -1063,8 +1064,18 @@ coff_symtab_read (symtab_offset, nsyms, section_offsets, objfile) { fcn_last_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno; } - enter_linenos (fcn_line_ptr, fcn_first_line, fcn_last_line, - section_offsets); + /* fcn_first_line is the line number of the opening '{'. + Do not record it - because it would affect gdb's idea + of the line number of the first statement of the function - + except for one-line functions, for which it is also the line + number of all the statements and of the closing '}', and + for which we do not have any other statement-line-number. */ + if (fcn_last_line == 1) + record_line (current_subfile, fcn_first_line, + fcn_first_line_addr); + else + enter_linenos (fcn_line_ptr, fcn_first_line, fcn_last_line, + section_offsets); finish_block (new->name, &local_symbols, new->old_blocks, new->start_addr, diff --git a/gdb/config.in b/gdb/config.in index 6bef6b40249..1093eafede6 100644 --- a/gdb/config.in +++ b/gdb/config.in @@ -135,6 +135,9 @@ /* Define if you have the bzero function. */ #undef HAVE_BZERO +/* Define if you have the poll function. */ +#undef HAVE_POLL + /* Define if you have the dcgettext function. */ #undef HAVE_DCGETTEXT diff --git a/gdb/configure b/gdb/configure index a3ad0955c0c..8e6b14df8ed 100755 --- a/gdb/configure +++ b/gdb/configure @@ -3371,7 +3371,7 @@ EOF fi -for ac_func in setpgid sbrk sigaction isascii bzero bcopy btowc +for ac_func in setpgid sbrk sigaction isascii bzero bcopy btowc poll do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3378: checking for $ac_func" >&5 @@ -5372,6 +5372,11 @@ fi fi +# libreadline needs libuser32.a in a cygwin environment +WIN32LIBS= +if test x$gdb_cv_os_cygwin = xyes; then + WIN32LIBS="-luser32" +fi @@ -5380,7 +5385,7 @@ fi # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:6593: checking for X" >&5 +echo "configure:6597: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -5442,12 +5447,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext <<EOF -#line 6655 "configure" +#line 6659 "configure" #include "confdefs.h" #include <$x_direct_test_include> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:6660: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:6664: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -5516,14 +5521,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <<EOF -#line 6729 "configure" +#line 6733 "configure" #include "confdefs.h" int main() { ${x_direct_test_function}() ; return 0; } EOF -if { (eval echo configure:6736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:6740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -5796,12 +5801,12 @@ fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:7080: checking for Cygwin environment" >&5 +echo "configure:7084: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 7085 "configure" +#line 7089 "configure" #include "confdefs.h" int main() { @@ -5812,7 +5817,7 @@ int main() { return __CYGWIN__; ; return 0; } EOF -if { (eval echo configure:7096: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:7100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -5829,19 +5834,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:7113: checking for mingw32 environment" >&5 +echo "configure:7117: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 7118 "configure" +#line 7122 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } EOF -if { (eval echo configure:7125: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:7129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -5860,7 +5865,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:7144: checking for executable suffix" >&5 +echo "configure:7148: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5870,10 +5875,10 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:7154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:7158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done @@ -6082,6 +6087,7 @@ s%@MACHINE_OBS@%$MACHINE_OBS%g s%@DLLTOOL@%$DLLTOOL%g s%@WINDRES@%$WINDRES%g s%@TERM_LIB@%$TERM_LIB%g +s%@WIN32LIBS@%$WIN32LIBS%g s%@ENABLE_IDE@%$ENABLE_IDE%g s%@FOUNDRY_LIB_BASE@%$FOUNDRY_LIB_BASE%g s%@LIBGUI@%$LIBGUI%g @@ -6091,7 +6097,6 @@ s%@IDE_X@%$IDE_X%g s%@LIBIDETCL@%$LIBIDETCL%g s%@LIBIDE@%$LIBIDE%g s%@IDE_DEPS@%$IDE_DEPS%g -s%@WIN32LIBS@%$WIN32LIBS%g s%@WIN32LDAPP@%$WIN32LDAPP%g s%@TCL_VERSION@%$TCL_VERSION%g s%@TCL_MAJOR_VERSION@%$TCL_MAJOR_VERSION%g diff --git a/gdb/configure.in b/gdb/configure.in index 216f6d6f749..82cd0d064da 100644 --- a/gdb/configure.in +++ b/gdb/configure.in @@ -75,7 +75,7 @@ AC_HEADER_STAT AC_C_CONST -AC_CHECK_FUNCS(setpgid sbrk sigaction isascii bzero bcopy btowc) +AC_CHECK_FUNCS(setpgid sbrk sigaction isascii bzero bcopy btowc poll) AC_FUNC_ALLOCA BFD_NEED_DECLARATION(malloc) @@ -447,7 +447,12 @@ fi fi AC_SUBST(TERM_LIB) - +# libreadline needs libuser32.a in a cygwin environment +WIN32LIBS= +if test x$gdb_cv_os_cygwin = xyes; then + WIN32LIBS="-luser32" +fi +AC_SUBST(WIN32LIBS) AC_PATH_X diff --git a/gdb/defs.h b/gdb/defs.h index ed16956ee55..e63fb1520d5 100644 --- a/gdb/defs.h +++ b/gdb/defs.h @@ -1012,7 +1012,7 @@ extern void store_floating PARAMS ((void *, int, DOUBLEST)); I'm not sure it's used in all contexts. It exists to deal with there being a few stray bits in the PC which would mislead us, not as some sort of generic thing to handle alignment or segmentation (it's possible it - should be in TARGET_READ_PC instead). */ + should be in TARGET_READ_PC instead). */ #if !defined (ADDR_BITS_REMOVE) #define ADDR_BITS_REMOVE(addr) (addr) #endif /* No ADDR_BITS_REMOVE. */ @@ -1032,6 +1032,7 @@ struct target_waitstatus; struct cmd_list_element; #endif +extern void (*async_hook) PARAMS ((void)); extern void (*init_ui_hook) PARAMS ((char *argv0)); extern void (*command_loop_hook) PARAMS ((void)); extern void (*fputs_unfiltered_hook) PARAMS ((const char *linebuffer, diff --git a/gdb/infrun.c b/gdb/infrun.c index d1a2d9b338e..7851ef894bc 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -1050,103 +1050,148 @@ delete_breakpoint_current_contents (arg) } } -/* Wait for control to return from inferior to debugger. - If inferior gets a signal, we may decide to start it up again - instead of returning. That is why there is a loop in this function. - When this function actually returns it means the inferior - should be left stopped and GDB should read more commands. */ - /* This enum encodes possible reasons for doing a target_wait, so that wfi can call target_wait in one place. (Ultimately the call will be moved out of the infinite loop entirely.) */ -enum wfi_states { - wfi_normal_state, - wfi_thread_hop_state, - wfi_nullified_state, - wfi_nonstep_watch_state +enum infwait_states { + infwait_normal_state, + infwait_thread_hop_state, + infwait_nullified_state, + infwait_nonstep_watch_state }; -void -wait_for_inferior () -{ - struct cleanup *old_cleanups; - struct target_waitstatus w; +/* This structure contains what used to be local variables in + wait_for_inferior. Probably many of them can return to being + locals in handle_inferior_event. */ + +struct execution_control_state { + struct target_waitstatus ws; + struct target_waitstatus *wp; int another_trap; - int random_signal = 0; + int random_signal; CORE_ADDR stop_func_start; CORE_ADDR stop_func_end; char *stop_func_name; - CORE_ADDR tmp; struct symtab_and_line sal; - int remove_breakpoints_on_following_step = 0; + int remove_breakpoints_on_following_step; int current_line; struct symtab *current_symtab; - int handling_longjmp = 0; /* FIXME */ + int handling_longjmp; /* FIXME */ int pid; int saved_inferior_pid; - int update_step_sp = 0; - int stepping_through_solib_after_catch = 0; - bpstat stepping_through_solib_catchpoints = NULL; - int enable_hw_watchpoints_after_wait = 0; - int stepping_through_sigtramp = 0; + int update_step_sp; + int stepping_through_solib_after_catch; + bpstat stepping_through_solib_catchpoints; + int enable_hw_watchpoints_after_wait; + int stepping_through_sigtramp; int new_thread_event; - int stepped_after_stopped_by_watchpoint; struct target_waitstatus tmpstatus; - enum wfi_states wfi_state; + enum infwait_states infwait_state; int waiton_pid; - struct target_waitstatus *wp; + int wait_some_more; +}; + +void init_execution_control_state PARAMS ((struct execution_control_state *ecs)); + +void handle_inferior_event PARAMS ((struct execution_control_state *ecs)); + +/* Wait for control to return from inferior to debugger. + If inferior gets a signal, we may decide to start it up again + instead of returning. That is why there is a loop in this function. + When this function actually returns it means the inferior + should be left stopped and GDB should read more commands. */ + +void +wait_for_inferior () +{ + struct cleanup *old_cleanups; + struct execution_control_state ecss; + struct execution_control_state *ecs; old_cleanups = make_cleanup (delete_breakpoint_current_contents, &step_resume_breakpoint); make_cleanup (delete_breakpoint_current_contents, &through_sigtramp_breakpoint); - sal = find_pc_line (prev_pc, 0); - current_line = sal.line; - current_symtab = sal.symtab; - - /* Are we stepping? */ -#define CURRENTLY_STEPPING() \ - ((through_sigtramp_breakpoint == NULL \ - && !handling_longjmp \ - && ((step_range_end && step_resume_breakpoint == NULL) \ - || trap_expected)) \ - || stepping_through_solib_after_catch \ - || bpstat_should_step ()) - ; + + /* wfi still stays in a loop, so it's OK just to take the address of + a local to get the ecs pointer. */ + ecs = &ecss; + + /* Fill in with reasonable starting values. */ + init_execution_control_state (ecs); + thread_step_needed = 0; /* We'll update this if & when we switch to a new thread. */ if (may_switch_from_inferior_pid) switched_from_inferior_pid = inferior_pid; - wfi_state = wfi_normal_state; + overlay_cache_invalid = 1; + + /* We have to invalidate the registers BEFORE calling target_wait + because they can be loaded from the target while in target_wait. + This makes remote debugging a bit more efficient for those + targets that provide critical registers as part of their normal + status mechanism. */ + + registers_changed (); while (1) { - if (wfi_state == wfi_normal_state) - { - overlay_cache_invalid = 1; + if (target_wait_hook) + ecs->pid = target_wait_hook (ecs->waiton_pid, ecs->wp); + else + ecs->pid = target_wait (ecs->waiton_pid, ecs->wp); - /* We have to invalidate the registers BEFORE calling - target_wait because they can be loaded from the target - while in target_wait. This makes remote debugging a bit - more efficient for those targets that provide critical - registers as part of their normal status mechanism. */ + /* Now figure out what to do with the result of the result. */ + handle_inferior_event (ecs); - registers_changed (); - waiton_pid = -1; - wp = &w; - } + if (!ecs->wait_some_more) + break; + } + do_cleanups (old_cleanups); +} - if (target_wait_hook) - pid = target_wait_hook (waiton_pid, wp); - else - pid = target_wait (waiton_pid, wp); +/* Prepare an execution control state for looping through a + wait_for_inferior-type loop. */ + +void +init_execution_control_state (ecs) + struct execution_control_state *ecs; +{ + ecs->random_signal = 0; + ecs->remove_breakpoints_on_following_step = 0; + ecs->handling_longjmp = 0; /* FIXME */ + ecs->update_step_sp = 0; + ecs->stepping_through_solib_after_catch = 0; + ecs->stepping_through_solib_catchpoints = NULL; + ecs->enable_hw_watchpoints_after_wait = 0; + ecs->stepping_through_sigtramp = 0; + ecs->sal = find_pc_line (prev_pc, 0); + ecs->current_line = ecs->sal.line; + ecs->current_symtab = ecs->sal.symtab; + ecs->infwait_state = infwait_normal_state; + ecs->waiton_pid = -1; + ecs->wp = &(ecs->ws); +} + +/* Given an execution control state that has been freshly filled in + by an event from the inferior, figure out what it means and take + appropriate action. */ - switch (wfi_state) +void +handle_inferior_event (ecs) + struct execution_control_state *ecs; +{ + CORE_ADDR tmp; + int stepped_after_stopped_by_watchpoint; + + /* Keep this extra brace for now, minimizes diffs. */ + { + switch (ecs->infwait_state) { - case wfi_normal_state: + case infwait_normal_state: /* Since we've done a wait, we have a new event. Don't carry over any expectations about needing to step over a breakpoint. */ @@ -1154,32 +1199,32 @@ wait_for_inferior () /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event is serviced in this loop, below. */ - if (enable_hw_watchpoints_after_wait) + if (ecs->enable_hw_watchpoints_after_wait) { TARGET_ENABLE_HW_WATCHPOINTS (inferior_pid); - enable_hw_watchpoints_after_wait = 0; + ecs->enable_hw_watchpoints_after_wait = 0; } stepped_after_stopped_by_watchpoint = 0; break; - case wfi_thread_hop_state: + case infwait_thread_hop_state: insert_breakpoints (); /* We need to restart all the threads now, * unles we're running in scheduler-locked mode. - * FIXME: shouldn't we look at CURRENTLY_STEPPING ()? + * FIXME: shouldn't we look at currently_stepping ()? */ if (scheduler_mode == schedlock_on) - target_resume (pid, 0, TARGET_SIGNAL_0); + target_resume (ecs->pid, 0, TARGET_SIGNAL_0); else target_resume (-1, 0, TARGET_SIGNAL_0); - wfi_state = wfi_normal_state; - continue; + ecs->infwait_state = infwait_normal_state; + goto wfi_continue; - case wfi_nullified_state: + case infwait_nullified_state: break; - case wfi_nonstep_watch_state: + case infwait_nonstep_watch_state: insert_breakpoints (); /* FIXME-maybe: is this cleaner than setting a flag? Does it @@ -1188,21 +1233,21 @@ wait_for_inferior () stepped_after_stopped_by_watchpoint = 1; break; } - wfi_state = wfi_normal_state; + ecs->infwait_state = infwait_normal_state; flush_cached_frames (); /* If it's a new process, add it to the thread database */ - new_thread_event = ((pid != inferior_pid) && !in_thread_list (pid)); + ecs->new_thread_event = ((ecs->pid != inferior_pid) && !in_thread_list (ecs->pid)); - if (w.kind != TARGET_WAITKIND_EXITED - && w.kind != TARGET_WAITKIND_SIGNALLED - && new_thread_event) + if (ecs->ws.kind != TARGET_WAITKIND_EXITED + && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED + && ecs->new_thread_event) { - add_thread (pid); + add_thread (ecs->pid); - printf_filtered ("[New %s]\n", target_pid_or_tid_to_str (pid)); + printf_filtered ("[New %s]\n", target_pid_or_tid_to_str (ecs->pid)); #if 0 /* NOTE: This block is ONLY meant to be invoked in case of a @@ -1225,11 +1270,11 @@ wait_for_inferior () make progress. */ target_resume (-1, 0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; #endif } - switch (w.kind) + switch (ecs->ws.kind) { case TARGET_WAITKIND_LOADED: /* Ignore gracefully during startup of the inferior, as it @@ -1260,18 +1305,18 @@ wait_for_inferior () } #endif resume (0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; case TARGET_WAITKIND_SPURIOUS: resume (0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; case TARGET_WAITKIND_EXITED: target_terminal_ours (); /* Must do this before mourn anyway */ - annotate_exited (w.value.integer); - if (w.value.integer) + annotate_exited (ecs->ws.value.integer); + if (ecs->ws.value.integer) printf_filtered ("\nProgram exited with code 0%o.\n", - (unsigned int) w.value.integer); + (unsigned int) ecs->ws.value.integer); else printf_filtered ("\nProgram exited normally.\n"); @@ -1279,7 +1324,7 @@ wait_for_inferior () that the user can inspect this again later. */ set_internalvar (lookup_internalvar ("_exitcode"), value_from_longest (builtin_type_int, - (LONGEST) w.value.integer)); + (LONGEST) ecs->ws.value.integer)); gdb_flush (gdb_stdout); target_mourn_inferior (); singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P*/ @@ -1288,7 +1333,7 @@ wait_for_inferior () case TARGET_WAITKIND_SIGNALLED: stop_print_frame = 0; - stop_signal = w.value.sig; + stop_signal = ecs->ws.value.sig; target_terminal_ours (); /* Must do this before mourn anyway */ annotate_signalled (); @@ -1318,38 +1363,38 @@ wait_for_inferior () the above cases end in a continue or goto. */ case TARGET_WAITKIND_FORKED: stop_signal = TARGET_SIGNAL_TRAP; - pending_follow.kind = w.kind; + pending_follow.kind = ecs->ws.kind; /* Ignore fork events reported for the parent; we're only interested in reacting to forks of the child. Note that we expect the child's fork event to be available if we waited for it now. */ - if (inferior_pid == pid) + if (inferior_pid == ecs->pid) { pending_follow.fork_event.saw_parent_fork = 1; - pending_follow.fork_event.parent_pid = pid; - pending_follow.fork_event.child_pid = w.value.related_pid; - continue; + pending_follow.fork_event.parent_pid = ecs->pid; + pending_follow.fork_event.child_pid = ecs->ws.value.related_pid; + goto wfi_continue; } else { pending_follow.fork_event.saw_child_fork = 1; - pending_follow.fork_event.child_pid = pid; - pending_follow.fork_event.parent_pid = w.value.related_pid; + pending_follow.fork_event.child_pid = ecs->pid; + pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid; } - stop_pc = read_pc_pid (pid); - saved_inferior_pid = inferior_pid; - inferior_pid = pid; + stop_pc = read_pc_pid (ecs->pid); + ecs->saved_inferior_pid = inferior_pid; + inferior_pid = ecs->pid; stop_bpstat = bpstat_stop_status (&stop_pc, (DECR_PC_AFTER_BREAK ? (prev_pc != stop_pc - DECR_PC_AFTER_BREAK - && CURRENTLY_STEPPING ()) + && currently_stepping (ecs)) : 0) ); - random_signal = !bpstat_explains_signal (stop_bpstat); - inferior_pid = saved_inferior_pid; + ecs->random_signal = !bpstat_explains_signal (stop_bpstat); + inferior_pid = ecs->saved_inferior_pid; goto process_event_stop_test; /* If this a platform which doesn't allow a debugger to touch a @@ -1361,7 +1406,7 @@ wait_for_inferior () little choice. */ case TARGET_WAITKIND_VFORKED: stop_signal = TARGET_SIGNAL_TRAP; - pending_follow.kind = w.kind; + pending_follow.kind = ecs->ws.kind; /* Is this a vfork of the parent? If so, then give any vfork catchpoints a chance to trigger now. (It's @@ -1369,11 +1414,11 @@ wait_for_inferior () it execs, and the child has not yet exec'd. We probably should warn the user to that effect when the catchpoint triggers...) */ - if (pid == inferior_pid) + if (ecs->pid == inferior_pid) { pending_follow.fork_event.saw_parent_fork = 1; - pending_follow.fork_event.parent_pid = pid; - pending_follow.fork_event.child_pid = w.value.related_pid; + pending_follow.fork_event.parent_pid = ecs->pid; + pending_follow.fork_event.child_pid = ecs->ws.value.related_pid; } /* If we've seen the child's vfork event but cannot really touch @@ -1382,14 +1427,14 @@ wait_for_inferior () else { pending_follow.fork_event.saw_child_fork = 1; - pending_follow.fork_event.child_pid = pid; - pending_follow.fork_event.parent_pid = w.value.related_pid; + pending_follow.fork_event.child_pid = ecs->pid; + pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid; target_post_startup_inferior (pending_follow.fork_event.child_pid); follow_vfork_when_exec = !target_can_follow_vfork_prior_to_exec (); if (follow_vfork_when_exec) { - target_resume (pid, 0, TARGET_SIGNAL_0); - continue; + target_resume (ecs->pid, 0, TARGET_SIGNAL_0); + goto wfi_continue; } } @@ -1398,10 +1443,10 @@ wait_for_inferior () (&stop_pc, (DECR_PC_AFTER_BREAK ? (prev_pc != stop_pc - DECR_PC_AFTER_BREAK - && CURRENTLY_STEPPING ()) + && currently_stepping (ecs)) : 0) ); - random_signal = !bpstat_explains_signal (stop_bpstat); + ecs->random_signal = !bpstat_explains_signal (stop_bpstat); goto process_event_stop_test; case TARGET_WAITKIND_EXECD: @@ -1416,14 +1461,14 @@ wait_for_inferior () inferior_ignoring_leading_exec_events--; if (pending_follow.kind == TARGET_WAITKIND_VFORKED) ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.parent_pid); - target_resume (pid, 0, TARGET_SIGNAL_0); - continue; + target_resume (ecs->pid, 0, TARGET_SIGNAL_0); + goto wfi_continue; } inferior_ignoring_leading_exec_events = target_reported_exec_events_per_exec_call () - 1; - pending_follow.execd_pathname = savestring (w.value.execd_pathname, - strlen (w.value.execd_pathname)); + pending_follow.execd_pathname = savestring (ecs->ws.value.execd_pathname, + strlen (ecs->ws.value.execd_pathname)); /* Did inferior_pid exec, or did a (possibly not-yet-followed) child of a vfork exec? @@ -1449,9 +1494,9 @@ wait_for_inferior () the parent vfork event is delivered. A single-step suffices. */ if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ()) - target_resume (pid, 1, TARGET_SIGNAL_0); + target_resume (ecs->pid, 1, TARGET_SIGNAL_0); /* We expect the parent vfork event to be available now. */ - continue; + goto wfi_continue; } /* This causes the eventpoints and symbol table to be reset. Must @@ -1459,18 +1504,18 @@ wait_for_inferior () follow_exec (inferior_pid, pending_follow.execd_pathname); free (pending_follow.execd_pathname); - stop_pc = read_pc_pid (pid); - saved_inferior_pid = inferior_pid; - inferior_pid = pid; + stop_pc = read_pc_pid (ecs->pid); + ecs->saved_inferior_pid = inferior_pid; + inferior_pid = ecs->pid; stop_bpstat = bpstat_stop_status (&stop_pc, (DECR_PC_AFTER_BREAK ? (prev_pc != stop_pc - DECR_PC_AFTER_BREAK - && CURRENTLY_STEPPING ()) + && currently_stepping (ecs)) : 0) ); - random_signal = !bpstat_explains_signal (stop_bpstat); - inferior_pid = saved_inferior_pid; + ecs->random_signal = !bpstat_explains_signal (stop_bpstat); + inferior_pid = ecs->saved_inferior_pid; goto process_event_stop_test; /* These syscall events are returned on HP-UX, as part of its @@ -1497,7 +1542,7 @@ wait_for_inferior () TARGET_DISABLE_HW_WATCHPOINTS (inferior_pid); } resume (0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; /* Before examining the threads further, step this thread to get it entirely out of the syscall. (We get notice of the @@ -1510,22 +1555,22 @@ wait_for_inferior () the thread (this causes the next wait on the thread to hang). Nor can we enable them after stepping until we've done a wait. - Thus, we simply set the flag enable_hw_watchpoints_after_wait + Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait here, which will be serviced immediately after the target is waited on. */ case TARGET_WAITKIND_SYSCALL_RETURN: - target_resume (pid, 1, TARGET_SIGNAL_0); + target_resume (ecs->pid, 1, TARGET_SIGNAL_0); if (number_of_threads_in_syscalls > 0) { number_of_threads_in_syscalls--; - enable_hw_watchpoints_after_wait = + ecs->enable_hw_watchpoints_after_wait = (number_of_threads_in_syscalls == 0); } - continue; + goto wfi_continue; case TARGET_WAITKIND_STOPPED: - stop_signal = w.value.sig; + stop_signal = ecs->ws.value.sig; break; } @@ -1536,13 +1581,13 @@ wait_for_inferior () /* At this point, all threads are stopped (happens automatically in either the OS or the native code). Therefore we need to continue all threads in order to make progress. */ - if (new_thread_event) + if (ecs->new_thread_event) { target_resume (-1, 0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; } - stop_pc = read_pc_pid (pid); + stop_pc = read_pc_pid (ecs->pid); /* See if a thread hit a thread-specific breakpoint that was meant for another thread. If so, then step that thread past the breakpoint, @@ -1551,19 +1596,19 @@ wait_for_inferior () if (stop_signal == TARGET_SIGNAL_TRAP) { if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p) - random_signal = 0; + ecs->random_signal = 0; else if (breakpoints_inserted && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK)) { - random_signal = 0; + ecs->random_signal = 0; if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, - pid)) + ecs->pid)) { int remove_status; /* Saw a breakpoint, but it was hit by the wrong thread. Just continue. */ - write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid); + write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, ecs->pid); remove_status = remove_breakpoints (); /* Did we fail to remove breakpoints? If so, try @@ -1575,29 +1620,29 @@ wait_for_inferior () then either :-) or execs. */ if (remove_status != 0) { - write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, pid); + write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, ecs->pid); } else { /* Single step */ - target_resume (pid, 1, TARGET_SIGNAL_0); + target_resume (ecs->pid, 1, TARGET_SIGNAL_0); /* FIXME: What if a signal arrives instead of the single-step happening? */ - waiton_pid = pid; - wp = &w; - wfi_state = wfi_thread_hop_state; - continue; + ecs->waiton_pid = ecs->pid; + ecs->wp = &(ecs->ws); + ecs->infwait_state = infwait_thread_hop_state; + goto wfi_continue; } /* We need to restart all the threads now, * unles we're running in scheduler-locked mode. - * FIXME: shouldn't we look at CURRENTLY_STEPPING ()? + * FIXME: shouldn't we look at currently_stepping ()? */ if (scheduler_mode == schedlock_on) - target_resume (pid, 0, TARGET_SIGNAL_0); + target_resume (ecs->pid, 0, TARGET_SIGNAL_0); else target_resume (-1, 0, TARGET_SIGNAL_0); - continue; + goto wfi_continue; } else { @@ -1610,7 +1655,7 @@ wait_for_inferior () } } else - random_signal = 1; + ecs->random_signal = 1; /* See if something interesting happened to the non-current thread. If so, then switch to that thread, and eventually give control back to @@ -1619,14 +1664,14 @@ wait_for_inferior () Note that if there's any kind of pending follow (i.e., of a fork, vfork or exec), we don't want to do this now. Rather, we'll let the next resume handle it. */ - if ((pid != inferior_pid) && + if ((ecs->pid != inferior_pid) && (pending_follow.kind == TARGET_WAITKIND_SPURIOUS)) { int printed = 0; /* If it's a random signal for a non-current thread, notify user if he's expressed an interest. */ - if (random_signal + if (ecs->random_signal && signal_print[stop_signal]) { /* ??rehrauer: I don't understand the rationale for this code. If the @@ -1662,8 +1707,8 @@ wait_for_inferior () if (signal_program[stop_signal] == 0) stop_signal = TARGET_SIGNAL_0; - target_resume (pid, 0, stop_signal); - continue; + target_resume (ecs->pid, 0, stop_signal); + goto wfi_continue; } /* It's a SIGTRAP or a signal we're interested in. Switch threads, @@ -1675,16 +1720,16 @@ wait_for_inferior () trap_expected, step_resume_breakpoint, through_sigtramp_breakpoint, step_range_start, step_range_end, - step_frame_address, handling_longjmp, - another_trap, - stepping_through_solib_after_catch, - stepping_through_solib_catchpoints, - stepping_through_sigtramp); + step_frame_address, ecs->handling_longjmp, + ecs->another_trap, + ecs->stepping_through_solib_after_catch, + ecs->stepping_through_solib_catchpoints, + ecs->stepping_through_sigtramp); if (may_switch_from_inferior_pid) switched_from_inferior_pid = inferior_pid; - inferior_pid = pid; + inferior_pid = ecs->pid; /* Load infrun state for the new thread. */ load_infrun_state (inferior_pid, &prev_pc, @@ -1692,16 +1737,16 @@ wait_for_inferior () &trap_expected, &step_resume_breakpoint, &through_sigtramp_breakpoint, &step_range_start, &step_range_end, - &step_frame_address, &handling_longjmp, - &another_trap, - &stepping_through_solib_after_catch, - &stepping_through_solib_catchpoints, - &stepping_through_sigtramp); + &step_frame_address, &ecs->handling_longjmp, + &ecs->another_trap, + &ecs->stepping_through_solib_after_catch, + &ecs->stepping_through_solib_catchpoints, + &ecs->stepping_through_sigtramp); if (context_hook) - context_hook (pid_to_thread_id (pid)); + context_hook (pid_to_thread_id (ecs->pid)); - printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid)); + printf_filtered ("[Switching to %s]\n", target_pid_to_str (ecs->pid)); flush_cached_frames (); } @@ -1716,35 +1761,35 @@ wait_for_inferior () it so that the user won't be confused when GDB appears to be ready to execute it. */ - /* if (INSTRUCTION_NULLIFIED && CURRENTLY_STEPPING ()) */ + /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */ if (INSTRUCTION_NULLIFIED) { registers_changed (); - target_resume (pid, 1, TARGET_SIGNAL_0); + target_resume (ecs->pid, 1, TARGET_SIGNAL_0); /* We may have received a signal that we want to pass to the inferior; therefore, we must not clobber the waitstatus - in W. */ + in WS. */ - wfi_state = wfi_nullified_state; - waiton_pid = pid; - wp = &tmpstatus; - continue; + ecs->infwait_state = infwait_nullified_state; + ecs->waiton_pid = ecs->pid; + ecs->wp = &(ecs->tmpstatus); + goto wfi_continue; } /* It may not be necessary to disable the watchpoint to stop over it. For example, the PA can (with some kernel cooperation) single step over a watchpoint without disabling the watchpoint. */ - if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (w)) + if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws)) { resume (1, 0); - continue; + goto wfi_continue; } /* It is far more common to need to disable a watchpoint to step the inferior over it. FIXME. What else might a debug register or page protection watchpoint scheme need here? */ - if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (w)) + if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws)) { /* At this point, we are stopped at an instruction which has attempted to write to a piece of memory under control of @@ -1767,32 +1812,32 @@ wait_for_inferior () remove_breakpoints (); registers_changed (); - target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */ + target_resume (ecs->pid, 1, TARGET_SIGNAL_0); /* Single step */ - waiton_pid = pid; - wp = &w; - wfi_state = wfi_nonstep_watch_state; - continue; + ecs->waiton_pid = ecs->pid; + ecs->wp = &(ecs->ws); + ecs->infwait_state = infwait_nonstep_watch_state; + goto wfi_continue; } /* It may be possible to simply continue after a watchpoint. */ if (HAVE_CONTINUABLE_WATCHPOINT) - STOPPED_BY_WATCHPOINT (w); + STOPPED_BY_WATCHPOINT (ecs->ws); - stop_func_start = 0; - stop_func_end = 0; - stop_func_name = 0; + ecs->stop_func_start = 0; + ecs->stop_func_end = 0; + ecs->stop_func_name = 0; /* Don't care about return value; stop_func_start and stop_func_name will both be 0 if it doesn't work. */ - find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start, - &stop_func_end); - stop_func_start += FUNCTION_START_OFFSET; - another_trap = 0; + find_pc_partial_function (stop_pc, &ecs->stop_func_name, + &ecs->stop_func_start, &ecs->stop_func_end); + ecs->stop_func_start += FUNCTION_START_OFFSET; + ecs->another_trap = 0; bpstat_clear (&stop_bpstat); stop_step = 0; stop_stack_dummy = 0; stop_print_frame = 1; - random_signal = 0; + ecs->random_signal = 0; stopped_by_random_signal = 0; breakpoints_failed = 0; @@ -1800,8 +1845,8 @@ wait_for_inferior () The alternatives are: 1) break; to really stop and return to the debugger, 2) drop through to start up again - (set another_trap to 1 to single step once) - 3) set random_signal to 1, and the decision between 1 and 2 + (set ecs->another_trap to 1 to single step once) + 3) set ecs->random_signal to 1, and the decision between 1 and 2 will be made according to the signal handling tables. */ /* First, distinguish signals caused by the debugger from signals @@ -1821,10 +1866,10 @@ wait_for_inferior () if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap) { stop_print_frame = 0; - break; + goto wfi_break; } if (stop_soon_quietly) - break; + goto wfi_break; /* Don't even think about breakpoints if just proceeded over a breakpoint. @@ -1852,7 +1897,7 @@ wait_for_inferior () without an intervening stop in sigtramp, which is detected by a new stack pointer value below any usual function calling stack adjustments. */ - (CURRENTLY_STEPPING () + (currently_stepping (ecs) && prev_pc != stop_pc - DECR_PC_AFTER_BREAK && !(step_range_end && INNER_THAN (read_sp (), (step_sp - 16)))) : @@ -1864,7 +1909,7 @@ wait_for_inferior () } if (stop_signal == TARGET_SIGNAL_TRAP) - random_signal + ecs->random_signal = !(bpstat_explains_signal (stop_bpstat) || trap_expected || (!CALL_DUMMY_BREAKPOINT_OFFSET_P @@ -1874,7 +1919,7 @@ wait_for_inferior () else { - random_signal + ecs->random_signal = !(bpstat_explains_signal (stop_bpstat) /* End of a stack dummy. Some systems (e.g. Sony news) give another signal besides SIGTRAP, so @@ -1883,7 +1928,7 @@ wait_for_inferior () && PC_IN_CALL_DUMMY (stop_pc, read_sp (), FRAME_FP (get_current_frame ()))) ); - if (!random_signal) + if (!ecs->random_signal) stop_signal = TARGET_SIGNAL_TRAP; } } @@ -1893,14 +1938,14 @@ wait_for_inferior () (unexpected) signal. */ else - random_signal = 1; + ecs->random_signal = 1; /* If a fork, vfork or exec event was seen, then there are two possible responses we can make: - 1. If a catchpoint triggers for the event (random_signal == 0), + 1. If a catchpoint triggers for the event (ecs->random_signal == 0), then we must stop now and issue a prompt. We will resume the inferior when the user tells us to. - 2. If no catchpoint triggers for the event (random_signal == 1), + 2. If no catchpoint triggers for the event (ecs->random_signal == 1), then we must resume the inferior now and keep checking. In either case, we must take appropriate steps to "follow" the @@ -1911,27 +1956,27 @@ wait_for_inferior () In either case, setting pending_follow causes the next resume() to take the appropriate following action. */ process_event_stop_test: - if (w.kind == TARGET_WAITKIND_FORKED) + if (ecs->ws.kind == TARGET_WAITKIND_FORKED) { - if (random_signal) /* I.e., no catchpoint triggered for this. */ + if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ { trap_expected = 1; stop_signal = TARGET_SIGNAL_0; goto keep_going; } } - else if (w.kind == TARGET_WAITKIND_VFORKED) + else if (ecs->ws.kind == TARGET_WAITKIND_VFORKED) { - if (random_signal) /* I.e., no catchpoint triggered for this. */ + if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ { stop_signal = TARGET_SIGNAL_0; goto keep_going; } } - else if (w.kind == TARGET_WAITKIND_EXECD) + else if (ecs->ws.kind == TARGET_WAITKIND_EXECD) { - pending_follow.kind = w.kind; - if (random_signal) /* I.e., no catchpoint triggered for this. */ + pending_follow.kind = ecs->ws.kind; + if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ { trap_expected = 1; stop_signal = TARGET_SIGNAL_0; @@ -1942,7 +1987,7 @@ wait_for_inferior () /* For the program's own signals, act according to the signal handling tables. */ - if (random_signal) + if (ecs->random_signal) { /* Signal not for debugging purposes. */ int printed = 0; @@ -1966,7 +2011,7 @@ wait_for_inferior () gdb_flush (gdb_stdout); } if (signal_stop[stop_signal]) - break; + goto wfi_break; /* If not going to stop, give terminal back if we took it away. */ else if (printed) @@ -2038,7 +2083,7 @@ wait_for_inferior () else #endif /* 0 */ set_longjmp_resume_breakpoint (jmp_buf_pc, NULL); - handling_longjmp = 1; /* FIXME */ + ecs->handling_longjmp = 1; /* FIXME */ goto keep_going; case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME: @@ -2051,12 +2096,12 @@ wait_for_inferior () && (INNER_THAN (FRAME_FP (get_current_frame ()), step_frame_address))) { - another_trap = 1; + ecs->another_trap = 1; goto keep_going; } #endif /* 0 */ disable_longjmp_breakpoint (); - handling_longjmp = 0; /* FIXME */ + ecs->handling_longjmp = 0; /* FIXME */ if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME) break; /* else fallthrough */ @@ -2068,7 +2113,7 @@ wait_for_inferior () remove_breakpoints (); } breakpoints_inserted = 0; - another_trap = 1; + ecs->another_trap = 1; /* Still need to check other stuff, at least the case where we are stepping and step out of the right range. */ break; @@ -2121,7 +2166,7 @@ wait_for_inferior () /* If were waiting for a trap, hitting the step_resume_break doesn't count as getting it. */ if (trap_expected) - another_trap = 1; + ecs->another_trap = 1; break; case BPSTAT_WHAT_CHECK_SHLIBS: @@ -2185,18 +2230,18 @@ wait_for_inferior () friends) until we reach non-dld code. At that point, we can stop stepping. */ bpstat_get_triggered_catchpoints (stop_bpstat, - &stepping_through_solib_catchpoints); - stepping_through_solib_after_catch = 1; + &ecs->stepping_through_solib_catchpoints); + ecs->stepping_through_solib_after_catch = 1; /* Be sure to lift all breakpoints, so the inferior does actually step past this point... */ - another_trap = 1; + ecs->another_trap = 1; break; } else { /* We want to step over this breakpoint, then keep going. */ - another_trap = 1; + ecs->another_trap = 1; break; } } @@ -2220,22 +2265,22 @@ wait_for_inferior () /* Are we stepping to get the inferior out of the dynamic linker's hook (and possibly the dld itself) after catching a shlib event? */ - if (stepping_through_solib_after_catch) + if (ecs->stepping_through_solib_after_catch) { #if defined(SOLIB_ADD) /* Have we reached our destination? If not, keep going. */ - if (SOLIB_IN_DYNAMIC_LINKER (pid, stop_pc)) + if (SOLIB_IN_DYNAMIC_LINKER (ecs->pid, stop_pc)) { - another_trap = 1; + ecs->another_trap = 1; goto keep_going; } #endif /* Else, stop and report the catchpoint(s) whose triggering caused us to begin stepping. */ - stepping_through_solib_after_catch = 0; + ecs->stepping_through_solib_after_catch = 0; bpstat_clear (&stop_bpstat); - stop_bpstat = bpstat_copy (stepping_through_solib_catchpoints); - bpstat_clear (&stepping_through_solib_catchpoints); + stop_bpstat = bpstat_copy (ecs->stepping_through_solib_catchpoints); + bpstat_clear (&ecs->stepping_through_solib_catchpoints); stop_print_frame = 1; goto stop_stepping; } @@ -2260,7 +2305,7 @@ wait_for_inferior () #ifdef HP_OS_BUG trap_expected_after_continue = 1; #endif - break; + goto wfi_break; } } @@ -2303,10 +2348,10 @@ wait_for_inferior () /* We can't update step_sp every time through the loop, because reading the stack pointer would slow down stepping too much. But we can update it every time we leave the step range. */ - update_step_sp = 1; + ecs->update_step_sp = 1; /* Did we just take a signal? */ - if (IN_SIGTRAMP (stop_pc, stop_func_name) + if (IN_SIGTRAMP (stop_pc, ecs->stop_func_name) && !IN_SIGTRAMP (prev_pc, prev_func_name) && INNER_THAN (read_sp (), step_sp)) { @@ -2365,13 +2410,13 @@ wait_for_inferior () code, anyway, so it's OK instead to just single-step out. Note: assuming such trampolines don't exhibit recursion on any platform... */ - find_pc_partial_function (stop_pc, &stop_func_name, - &stop_func_start, - &stop_func_end); + find_pc_partial_function (stop_pc, &ecs->stop_func_name, + &ecs->stop_func_start, + &ecs->stop_func_end); /* Readjust stepping range */ - step_range_start = stop_func_start; - step_range_end = stop_func_end; - stepping_through_sigtramp = 1; + step_range_start = ecs->stop_func_start; + step_range_end = ecs->stop_func_end; + ecs->stepping_through_sigtramp = 1; } } @@ -2384,15 +2429,15 @@ wait_for_inferior () range? */ step_range_end = (step_range_start = prev_pc) + 1; - remove_breakpoints_on_following_step = 1; + ecs->remove_breakpoints_on_following_step = 1; goto keep_going; } - if (stop_pc == stop_func_start /* Quick test */ - || (in_prologue (stop_pc, stop_func_start) && - !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name)) - || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name) - || stop_func_name == 0) + if (stop_pc == ecs->stop_func_start /* Quick test */ + || (in_prologue (stop_pc, ecs->stop_func_start) && + !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name)) + || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name) + || ecs->stop_func_name == 0) { /* It's a subroutine call. */ @@ -2402,7 +2447,7 @@ wait_for_inferior () supposed to be stepping at the assembly language level ("stepi"). Just stop. */ stop_step = 1; - break; + goto wfi_break; } if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc)) @@ -2416,7 +2461,7 @@ wait_for_inferior () the end of, if we do step into it. */ tmp = SKIP_TRAMPOLINE_CODE (stop_pc); if (tmp != 0) - stop_func_start = tmp; + ecs->stop_func_start = tmp; else { tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc); @@ -2444,7 +2489,7 @@ wait_for_inferior () { struct symtab_and_line tmp_sal; - tmp_sal = find_pc_line (stop_func_start, 0); + tmp_sal = find_pc_line (ecs->stop_func_start, 0); if (tmp_sal.line != 0) goto step_into_function; } @@ -2491,10 +2536,10 @@ wait_for_inferior () e.g.) and the frame address is likely to be incorrect. No danger of sigtramp recursion. */ - if (stepping_through_sigtramp) + if (ecs->stepping_through_sigtramp) { step_resume_breakpoint->frame = (CORE_ADDR) NULL; - stepping_through_sigtramp = 0; + ecs->stepping_through_sigtramp = 0; } else if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc)) step_resume_breakpoint->frame = step_frame_address; @@ -2512,9 +2557,9 @@ wait_for_inferior () s = find_pc_symtab (stop_pc); if (s && s->language != language_asm) - stop_func_start = SKIP_PROLOGUE (stop_func_start); + ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start); } - sal = find_pc_line (stop_func_start, 0); + ecs->sal = find_pc_line (ecs->stop_func_start, 0); /* Use the step_resume_break to step until the end of the prologue, even if that involves jumps (as it seems to on the vax under 4.2). */ @@ -2525,15 +2570,15 @@ wait_for_inferior () /* no, don't either. It skips any code that's legitimately on the first line. */ #else - if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end) - stop_func_start = sal.end; + if (ecs->sal.end && ecs->sal.pc != ecs->stop_func_start && ecs->sal.end < ecs->stop_func_end) + ecs->stop_func_start = ecs->sal.end; #endif - if (stop_func_start == stop_pc) + if (ecs->stop_func_start == stop_pc) { /* We are already there: stop now. */ stop_step = 1; - break; + goto wfi_break; } else /* Put the step-breakpoint there and go until there. */ @@ -2541,8 +2586,8 @@ wait_for_inferior () struct symtab_and_line sr_sal; INIT_SAL (&sr_sal); /* initialize to zeroes */ - sr_sal.pc = stop_func_start; - sr_sal.section = find_pc_overlay (stop_func_start); + sr_sal.pc = ecs->stop_func_start; + sr_sal.section = find_pc_overlay (ecs->stop_func_start); /* Do not specify what the fp should be when we stop since on some machines the prologue is where the new fp value is established. */ @@ -2559,19 +2604,19 @@ wait_for_inferior () /* We've wandered out of the step range. */ - sal = find_pc_line (stop_pc, 0); + ecs->sal = find_pc_line (stop_pc, 0); if (step_range_end == 1) { /* It is stepi or nexti. We always want to stop stepping after one instruction. */ stop_step = 1; - break; + goto wfi_break; } /* If we're in the return path from a shared library trampoline, we want to proceed through the trampoline when stepping. */ - if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name)) + if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name)) { CORE_ADDR tmp; @@ -2601,25 +2646,25 @@ wait_for_inferior () } } - if (sal.line == 0) + if (ecs->sal.line == 0) { /* We have no line number information. That means to stop stepping (does this always happen right after one instruction, when we do "s" in a function with no line numbers, or can this happen as a result of a return or longjmp?). */ stop_step = 1; - break; + goto wfi_break; } - if ((stop_pc == sal.pc) - && (current_line != sal.line || current_symtab != sal.symtab)) + if ((stop_pc == ecs->sal.pc) + && (ecs->current_line != ecs->sal.line || ecs->current_symtab != ecs->sal.symtab)) { /* We are at the start of a different line. So stop. Note that we don't stop if we step into the middle of a different line. That is said to make things like for (;;) statements work better. */ stop_step = 1; - break; + goto wfi_break; } /* We aren't done stepping. @@ -2629,7 +2674,7 @@ wait_for_inferior () new line in mid-statement, we continue stepping. This makes things like for(;;) statements work better.) */ - if (stop_func_end && sal.end >= stop_func_end) + if (ecs->stop_func_end && ecs->sal.end >= ecs->stop_func_end) { /* If this is the last line of the function, don't keep stepping (it would probably step us out of the function). @@ -2637,13 +2682,13 @@ wait_for_inferior () in which after skipping the prologue we better stop even though we will be in mid-line. */ stop_step = 1; - break; + goto wfi_break; } - step_range_start = sal.pc; - step_range_end = sal.end; + step_range_start = ecs->sal.pc; + step_range_end = ecs->sal.end; step_frame_address = FRAME_FP (get_current_frame ()); - current_line = sal.line; - current_symtab = sal.symtab; + ecs->current_line = ecs->sal.line; + ecs->current_symtab = ecs->sal.symtab; /* In the case where we just stepped out of a function into the middle of a line of the caller, continue stepping, but step_frame_address @@ -2659,7 +2704,7 @@ wait_for_inferior () check_sigtramp2: if (trap_expected - && IN_SIGTRAMP (stop_pc, stop_func_name) + && IN_SIGTRAMP (stop_pc, ecs->stop_func_name) && !IN_SIGTRAMP (prev_pc, prev_func_name) && INNER_THAN (read_sp (), step_sp)) { @@ -2686,8 +2731,8 @@ wait_for_inferior () if (breakpoints_inserted) insert_breakpoints (); - remove_breakpoints_on_following_step = 1; - another_trap = 1; + ecs->remove_breakpoints_on_following_step = 1; + ecs->another_trap = 1; } keep_going: @@ -2708,16 +2753,16 @@ wait_for_inferior () /* Save the pc before execution, to compare with pc after stop. */ prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */ - prev_func_start = stop_func_start; /* Ok, since if DECR_PC_AFTER + prev_func_start = ecs->stop_func_start; /* Ok, since if DECR_PC_AFTER BREAK is defined, the original pc would not have been at the start of a function. */ - prev_func_name = stop_func_name; + prev_func_name = ecs->stop_func_name; - if (update_step_sp) + if (ecs->update_step_sp) step_sp = read_sp (); - update_step_sp = 0; + ecs->update_step_sp = 0; /* If we did not do break;, it means we should keep running the inferior and not return to debugger. */ @@ -2727,7 +2772,7 @@ wait_for_inferior () /* We took a signal (which we are supposed to pass through to the inferior, else we'd have done a break above) and we haven't yet gotten our trap. Simply continue. */ - resume (CURRENTLY_STEPPING (), stop_signal); + resume (currently_stepping (ecs), stop_signal); } else { @@ -2746,22 +2791,22 @@ wait_for_inferior () want to hit a breakpoint, pull em out. */ if (step_resume_breakpoint == NULL && through_sigtramp_breakpoint == NULL - && remove_breakpoints_on_following_step) + && ecs->remove_breakpoints_on_following_step) { - remove_breakpoints_on_following_step = 0; + ecs->remove_breakpoints_on_following_step = 0; remove_breakpoints (); breakpoints_inserted = 0; } else if (!breakpoints_inserted && - (through_sigtramp_breakpoint != NULL || !another_trap)) + (through_sigtramp_breakpoint != NULL || !ecs->another_trap)) { breakpoints_failed = insert_breakpoints (); if (breakpoints_failed) - break; + goto wfi_break; breakpoints_inserted = 1; } - trap_expected = another_trap; + trap_expected = ecs->another_trap; /* Do not deliver SIGNAL_TRAP (except when the user explicitly specifies that such a signal should be @@ -2793,10 +2838,36 @@ wait_for_inferior () SHIFT_INST_REGS (); #endif /* SHIFT_INST_REGS */ - resume (CURRENTLY_STEPPING (), stop_signal); + resume (currently_stepping (ecs), stop_signal); + } + + /* Former continues in the main loop goto here. */ + wfi_continue: + /* This used to be at the top of the loop. */ + if (ecs->infwait_state == infwait_normal_state) + { + overlay_cache_invalid = 1; + + /* We have to invalidate the registers BEFORE calling + target_wait because they can be loaded from the target + while in target_wait. This makes remote debugging a bit + more efficient for those targets that provide critical + registers as part of their normal status mechanism. */ + + registers_changed (); + ecs->waiton_pid = -1; + ecs->wp = &(ecs->ws); } + /* This is the old end of the while loop. Let everybody know + we want to wait for the inferior some more and get called + again soon. */ + ecs->wait_some_more = 1; + return; } + /* Former breaks in the main loop goto here. */ +wfi_break: + stop_stepping: if (target_has_execution) { @@ -2816,9 +2887,9 @@ stop_stepping: do { if (target_wait_hook) - parent_pid = target_wait_hook (-1, &w); + parent_pid = target_wait_hook (-1, &(ecs->ws)); else - parent_pid = target_wait (-1, &w); + parent_pid = target_wait (-1, &(ecs->ws)); } while (parent_pid != inferior_pid); } @@ -2827,10 +2898,25 @@ stop_stepping: time, just like we did above if we didn't break out of the loop. */ prev_pc = read_pc (); - prev_func_start = stop_func_start; - prev_func_name = stop_func_name; + prev_func_start = ecs->stop_func_start; + prev_func_name = ecs->stop_func_name; } - do_cleanups (old_cleanups); + /* Let callers know we don't want to wait for the inferior anymore. */ + ecs->wait_some_more = 0; +} + +/* Are we in the middle of stepping? */ + +int +currently_stepping (ecs) + struct execution_control_state *ecs; +{ + return ((through_sigtramp_breakpoint == NULL + && !ecs->handling_longjmp + && ((step_range_end && step_resume_breakpoint == NULL) + || trap_expected)) + || ecs->stepping_through_solib_after_catch + || bpstat_should_step ()); } /* This function returns TRUE if ep is an internal breakpoint @@ -3758,6 +3844,17 @@ of the program stops.", &cmdlist); signal_stop[TARGET_SIGNAL_WINCH] = 0; signal_print[TARGET_SIGNAL_WINCH] = 0; + /* These signals are used internally by user-level thread + implementations. (See signal(5) on Solaris.) Like the above + signals, a healthy program receives and handles them as part of + its normal operation. */ + signal_stop[TARGET_SIGNAL_LWP] = 0; + signal_print[TARGET_SIGNAL_LWP] = 0; + signal_stop[TARGET_SIGNAL_WAITING] = 0; + signal_print[TARGET_SIGNAL_WAITING] = 0; + signal_stop[TARGET_SIGNAL_CANCEL] = 0; + signal_print[TARGET_SIGNAL_CANCEL] = 0; + #ifdef SOLIB_ADD add_show_from_set (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger, diff --git a/gdb/main.c b/gdb/main.c index 809ef863af5..6e94c29ba94 100644 --- a/gdb/main.c +++ b/gdb/main.c @@ -35,19 +35,6 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "gdb_string.h" -/* Temporary variable for SET_TOP_LEVEL. */ - -static int top_level_val; - -/* Do a setjmp on error_return and quit_return. catch_errors is - generally a cleaner way to do this, but main() would look pretty - ugly if it had to use catch_errors each time. */ - -#define SET_TOP_LEVEL() \ - (((top_level_val = SIGSETJMP (error_return)) \ - ? (PTR) 0 : (PTR) memcpy (quit_return, error_return, sizeof (SIGJMP_BUF))) \ - , top_level_val) - /* If nonzero, display time usage both at startup and for each command. */ int display_time; @@ -56,6 +43,12 @@ int display_time; int display_space; +/* Whether this is the async version or not. The async version is +invoked on the command line with the -nw --async options. In this +version, the usual command_loop is substituted by and event loop which +processes UI events asynchronously. */ +int async = 0; + /* Whether this is the command line version or not */ int tui_version = 0; @@ -185,7 +178,8 @@ main (argc, argv) short option (or arbitrary numbers starting at 10 for those with no equivalent). */ static struct option long_options[] = - { + { + {"async", no_argument, &async, 1}, #if defined(TUI) {"tui", no_argument, &tui_version, 1}, #endif @@ -397,6 +391,10 @@ main (argc, argv) quiet = 1; } + /* Get ready to invoke the event loop instead of the + command_loop. See event-loop.h for more details.*/ + if (async) + async_hook = setup_event_loop; #if defined(TUI) if (tui_version) init_ui_hook = tuiInit; @@ -624,6 +622,12 @@ main (argc, argv) #endif } + /* Call the event loop, if gdb was invoked with the --async + option. Control will never get back to this file, if the event + loop is invoked. See the files event-*.[ch] for details. */ + if (async_hook) + async_hook(); + /* The default command loop. The WIN32 Gui calls this main to set up gdb's state, and has its own command loop. */ diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index 80bf1c42a18..2d8efdf2f1d 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -1153,21 +1153,29 @@ heuristic_proc_start (pc) { static int blurb_printed = 0; - if (fence == VM_MIN_ADDRESS) - warning("Hit beginning of text section without finding"); - else - warning("Hit heuristic-fence-post without finding"); + warning ("Warning: GDB can't find the start of the function at 0x%s.", + paddr_nz (pc)); - warning("enclosing function for address 0x%s", paddr_nz (pc)); if (!blurb_printed) { - printf_filtered ("\ -This warning occurs if you are debugging a function without any symbols\n\ -(for example, in a stripped executable). In that case, you may wish to\n\ -increase the size of the search with the `set heuristic-fence-post' command.\n\ -\n\ -Otherwise, you told GDB there was a function where there isn't one, or\n\ -(more likely) you have encountered a bug in GDB.\n"); + /* This actually happens frequently in embedded + development, when you first connect to a board + and your stack pointer and pc are nowhere in + particular. This message needs to give people + in that situation enough information to + determine that it's no big deal. */ + printf_filtered ("\n\ + GDB is unable to find the start of the function at 0x%s\n\ +and thus can't determine the size of that function's stack frame.\n\ +This means that GDB may be unable to access that stack frame, or\n\ +the frames below it.\n\ + This problem is most likely caused by an invalid program counter or\n\ +stack pointer.\n\ + However, if you think GDB should simply search farther back\n\ +from 0x%s for code which looks like the beginning of a\n\ +function, you can increase the range of the search using the `set\n\ +heuristic-fence-post' command.\n", + paddr_nz (pc), paddr_nz (pc)); blurb_printed = 1; } } diff --git a/gdb/target.c b/gdb/target.c index d96514c4dbb..fe0e0c001b2 100644 --- a/gdb/target.c +++ b/gdb/target.c @@ -1258,6 +1258,7 @@ static struct { {"SIG61", "Real-time event 61"}, {"SIG62", "Real-time event 62"}, {"SIG63", "Real-time event 63"}, + {"SIGCANCEL", "LWP internal signal"}, #if defined(MACH) || defined(__MACH__) /* Mach exceptions */ @@ -1446,6 +1447,9 @@ target_signal_from_host (hostsig) #if defined (SIGWAITING) if (hostsig == SIGWAITING) return TARGET_SIGNAL_WAITING; #endif +#if defined (SIGCANCEL) + if (hostsig == SIGCANCEL) return TARGET_SIGNAL_CANCEL; +#endif #if defined (SIGLWP) if (hostsig == SIGLWP) return TARGET_SIGNAL_LWP; #endif @@ -1624,6 +1628,9 @@ target_signal_to_host (oursig) #if defined (SIGWAITING) case TARGET_SIGNAL_WAITING: return SIGWAITING; #endif +#if defined (SIGCANCEL) + case TARGET_SIGNAL_CANCEL: return SIGCANCEL; +#endif #if defined (SIGLWP) case TARGET_SIGNAL_LWP: return SIGLWP; #endif diff --git a/gdb/target.h b/gdb/target.h index 41006efe418..30d33a2101d 100644 --- a/gdb/target.h +++ b/gdb/target.h @@ -106,9 +106,14 @@ enum target_waitkind { signals (insofar as various unices use the same numbers, anyway). It is also the numbering of the GDB remote protocol. Other remote protocols, if they use a different numbering, should make sure to - translate appropriately. */ + translate appropriately. -/* This is based strongly on Unix/POSIX signals for several reasons: + Since these numbers have actually made it out into other software + (stubs, etc.), you mustn't disturb the assigned numbering. If you + need to add new signals here, add them to the end of the explicitly + numbered signals. + + This is based strongly on Unix/POSIX signals for several reasons: (1) This set of signals represents a widely-accepted attempt to represent events of this sort in a portable fashion, (2) we want a signal to make it from wait to child_wait to the user intact, (3) many @@ -205,6 +210,10 @@ enum target_signal { TARGET_SIGNAL_REALTIME_61 = 73, TARGET_SIGNAL_REALTIME_62 = 74, TARGET_SIGNAL_REALTIME_63 = 75, + + /* Used internally by Solaris threads. See signal(5) on Solaris. */ + TARGET_SIGNAL_CANCEL = 76, + #if defined(MACH) || defined(__MACH__) /* Mach exceptions */ TARGET_EXC_BAD_ACCESS, diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 4a5eec12f55..c5e2362bb6d 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,19 @@ +1999-05-06 Keith Seitz <keiths@cygnus.com> + + * gdb.base/annota2.cc: Include stdio.h. + +Wed May 5 17:44:31 1999 Stan Shebs <shebs@andros.cygnus.com> + + * gdb.base/crossload.exp: Remove, this has been disabled ever + since BFD stopped including all targets, and cross-GDB gets + plenty of testing anyway. + * gdb.base/i486-elf.u, gdb.base/m68k-aout.u, gdb.base/m68k-elf.u, + gdb.base/sparc-aout.u, gdb.base/i860-elf.u, gdb.base/m68k-aout2.u, + gdb.base/mips-ecoff.u, gdb.base/sparc-elf.u: Remove. + * gdb.base/README: Remove, was doc for this. + * gdb.base/Makefile.in (CROSS_EXECUTABLES): Remove, no longer + needed. + 1999-05-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com> * gdb.base/call-ar-st.exp: Fix one regular expression in test diff --git a/gdb/testsuite/gdb.base/Makefile.in b/gdb/testsuite/gdb.base/Makefile.in index a5d637438bd..11cf1da9095 100644 --- a/gdb/testsuite/gdb.base/Makefile.in +++ b/gdb/testsuite/gdb.base/Makefile.in @@ -14,10 +14,6 @@ EXECUTABLES = all-types bitfields break \ solib so-impl-ld so-indr-cl \ step-test structs structs2 twice-tmp varargs watchpoint whatis -# uuencoded format to avoid SCCS/RCS problems with binary files. -CROSS_EXECUTABLES = i486-elf i860-elf m68k-elf m68k-aout m68k-aout2 \ - mips-ecoff sparc-aout sparc-elf - MISCELLANEOUS = coremmap.data shr1.sl shr2.sl solib1.sl solib2.sl all: @@ -32,7 +28,7 @@ installcheck: check: clean mostlyclean: - -rm -f *~ *.o a.out xgdb *.x $(CROSS_EXECUTABLES) *.ci *.tmp + -rm -f *~ *.o a.out xgdb *.x *.ci *.tmp -rm -f core core.coremaker coremaker.core corefile $(EXECUTABLES) -rm -f $(MISCELLANEOUS) twice-tmp.c diff --git a/gdb/testsuite/gdb.base/annota2.cc b/gdb/testsuite/gdb.base/annota2.cc index e9d7da03470..f8a25f94d5e 100644 --- a/gdb/testsuite/gdb.base/annota2.cc +++ b/gdb/testsuite/gdb.base/annota2.cc @@ -1,3 +1,5 @@ +#include <stdio.h> + class A { public: int x; diff --git a/gdb/top.c b/gdb/top.c index 2cc4b5062e2..0cf2cd4257d 100644 --- a/gdb/top.c +++ b/gdb/top.c @@ -33,6 +33,7 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "terminal.h" /* For job_control. */ #include "annotate.h" #include "top.h" +#include "event-loop.h" /* readline include files */ #include <readline/readline.h> @@ -70,7 +71,16 @@ static char * line_completion_function PARAMS ((char *, int, char *, int)); static char * readline_line_completion_function PARAMS ((char *, int)); -static void command_loop_marker PARAMS ((int)); +/* NOTE 4/29/99: this function will be static again, after we make the + event loop be the default command loop for gdb, and we merge + event-top.c into this file, top.c */ +/* static */ void command_loop_marker PARAMS ((int)); + +extern void set_async_editing_command PARAMS ((char *, int, struct cmd_list_element *)); + +extern void set_async_annotation_level PARAMS ((char *, int, struct cmd_list_element *)); + +extern void set_async_prompt PARAMS ((char *, int, struct cmd_list_element *)); static void while_command PARAMS ((char *, int)); @@ -139,7 +149,10 @@ static void complete_command PARAMS ((char *, int)); static void do_nothing PARAMS ((int)); #ifdef SIGHUP -static int quit_cover PARAMS ((PTR)); +/* NOTE 4/29/99: This function will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ int quit_cover PARAMS ((PTR)); static void disconnect PARAMS ((int)); #endif @@ -586,7 +599,10 @@ int signo; /* Just a little helper function for disconnect(). */ -static int +/* NOTE 4/29/99: This function will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ int quit_cover (s) PTR s; { @@ -598,19 +614,31 @@ quit_cover (s) #endif /* defined SIGHUP */ /* Line number we are currently in in a file which is being sourced. */ -static int source_line_number; +/* NOTE 4/29/99: This variable will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ int source_line_number; /* Name of the file we are sourcing. */ -static char *source_file_name; +/* NOTE 4/29/99: This variable will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ char *source_file_name; /* Buffer containing the error_pre_print used by the source stuff. Malloc'd. */ -static char *source_error; +/* NOTE 4/29/99: This variable will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ char *source_error; static int source_error_allocated; /* Something to glom on to the start of error_pre_print if source_file_name is set. */ -static char *source_pre_error; +/* NOTE 4/29/99: This variable will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ char *source_pre_error; /* Clean up on error during a "source" command (or execution of a user-defined command). */ @@ -657,7 +685,15 @@ gdb_init (argv0) initialize_utils (); /* Make errors and warnings possible */ initialize_all_files (); init_main (); /* But that omits this file! Do it now */ - init_signals (); + + /* The signal handling mechanism is different depending whether or + not the async version is run. NOTE: in the future we plan to make + the event loop be the default engine of gdb, and this difference + will disappear. */ + if (async_hook) + async_init_signals (); + else + init_signals (); init_proc (); @@ -1293,7 +1329,10 @@ execute_command (p, from_tty) } /* ARGSUSED */ -static void +/* NOTE 4/29/99: This function will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ void command_loop_marker (foo) int foo; { @@ -1479,7 +1518,10 @@ gdb_readline (prrompt) substitution. These variables are given default values at the end of this file. */ static int command_editing_p; -static int history_expansion_p; +/* NOTE 4/29/99: This variable will be static again, once we modify + gdb to use the event loop as the default command loop and we merge + event-top.c into this file, top.c */ +/* static */ int history_expansion_p; static int write_history_p; static int history_size; static char *history_filename; @@ -3448,14 +3490,44 @@ init_main () { struct cmd_list_element *c; + /* from event-top.c */ + extern int async_command_editing_p; + extern struct prompts the_prompts; + extern char *async_annotation_suffix; + extern char *new_async_prompt; + + /* If we are running the asynchronous version, + we initialize the prompts differently. */ + if (!async_hook) + { #ifdef DEFAULT_PROMPT - prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT)); + prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT)); #else - prompt = savestring ("(gdb) ", 6); + prompt = savestring ("(gdb) ", 6); #endif + } + else + { + /* initialize the prompt stack to a simple "(gdb) " prompt or to + whatever the DEFULAT_PROMPT is. */ + the_prompts.top = 0; + PREFIX(0) = ""; +#ifdef DEFAULT_PROMPT + PROMPT(0) = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT)); +#else + PROMPT(0) = savestring ("(gdb) ", 6); +#endif + SUFFIX(0) = ""; + /* Set things up for annotation_level > 1, if the user ever decides + to use it. */ + async_annotation_suffix = "prompt"; + /* Set the variable associated with the setshow prompt command. */ + new_async_prompt = savestring (PROMPT (0), strlen (PROMPT (0))); + } /* Set the important stuff up for command editing. */ command_editing_p = 1; + async_command_editing_p = 1; history_expansion_p = 0; write_history_p = 0; @@ -3503,11 +3575,27 @@ The change does not take effect for the program being debugged\n\ until the next time it is started.", &cmdlist); c->completer = filename_completer; - add_show_from_set - (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt, - "Set gdb's prompt", - &setlist), - &showlist); + /* The set prompt command is different depending whether or not the + async version is run. NOTE: this difference is going to + disappear as we make the event loop be the default engine of + gdb. */ + if (!async_hook) + { + add_show_from_set + (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt, + "Set gdb's prompt", + &setlist), + &showlist); + } + else + { + c = add_set_cmd ("prompt", class_support, var_string, + (char *)&new_async_prompt, + "Set gdb's prompt", + &setlist); + add_show_from_set (c, &showlist); + c->function.sfunc = set_async_prompt; + } add_com ("echo", class_support, echo_command, "Print a constant string. Give string as argument.\n\ @@ -3558,13 +3646,30 @@ hitting return."); c->function.sfunc = set_verbose; set_verbose (NULL, 0, c); - add_show_from_set - (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p, - "Set editing of command lines as they are typed.\n\ + /* The set editing command is different depending whether or not the + async version is run. NOTE: this difference is going to disappear + as we make the event loop be the default engine of gdb. */ + if (!async_hook) + { + add_show_from_set + (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p, + "Set editing of command lines as they are typed.\n\ Use \"on\" to enable the editing, and \"off\" to disable it.\n\ Without an argument, command line editing is enabled. To edit, use\n\ EMACS-like or VI-like commands like control-P or ESC.", &setlist), - &showlist); + &showlist); + } + else + { + c = add_set_cmd ("editing", class_support, var_boolean, (char *)&async_command_editing_p, + "Set editing of command lines as they are typed.\n\ +Use \"on\" to enable the editing, and \"off\" to disable it.\n\ +Without an argument, command line editing is enabled. To edit, use\n\ +EMACS-like or VI-like commands like control-P or ESC.", &setlist); + + add_show_from_set (c, &showlist); + c->function.sfunc = set_async_editing_command; + } add_prefix_cmd ("history", class_support, set_history, "Generic command for setting command history parameters.", @@ -3664,10 +3769,27 @@ This value is used to set the time limit for gdb to wait for a response\n\ from the target.", &setlist), &showlist); - c = add_set_cmd ("annotate", class_obscure, var_zinteger, - (char *)&annotation_level, "Set annotation_level.\n\ + /* The set annotate command is different depending whether or not + the async version is run. NOTE: this difference is going to + disappear as we make the event loop be the default engine of + gdb. */ + if (!async_hook) + { + c = add_set_cmd ("annotate", class_obscure, var_zinteger, + (char *)&annotation_level, "Set annotation_level.\n\ 0 == normal; 1 == fullname (for use when running under emacs)\n\ 2 == output annotated suitably for use by programs that control GDB.", - &setlist); - c = add_show_from_set (c, &showlist); + &setlist); + c = add_show_from_set (c, &showlist); + } + else + { + c = add_set_cmd ("annotate", class_obscure, var_zinteger, + (char *)&annotation_level, "Set annotation_level.\n\ +0 == normal; 1 == fullname (for use when running under emacs)\n\ +2 == output annotated suitably for use by programs that control GDB.", + &setlist); + add_show_from_set (c, &showlist); + c->function.sfunc = set_async_annotation_level; + } } diff --git a/gdb/top.h b/gdb/top.h index 3564169b9af..188d184f91f 100644 --- a/gdb/top.h +++ b/gdb/top.h @@ -41,6 +41,19 @@ extern char gdbinit[]; #define SIGLONGJMP(buf,val) longjmp(buf,val) #endif +/* Temporary variable for SET_TOP_LEVEL. */ + +int top_level_val; + +/* Do a setjmp on error_return and quit_return. catch_errors is + generally a cleaner way to do this, but main() would look pretty + ugly if it had to use catch_errors each time. */ + +#define SET_TOP_LEVEL() \ + (((top_level_val = SIGSETJMP (error_return)) \ + ? (PTR) 0 : (PTR) memcpy (quit_return, error_return, sizeof (SIGJMP_BUF))) \ + , top_level_val) + extern SIGJMP_BUF error_return; extern SIGJMP_BUF quit_return; @@ -55,6 +68,9 @@ extern int quit_confirm PARAMS ((void)); extern void quit_force PARAMS ((char *, int)); extern void quit_command PARAMS ((char *, int)); +extern void setup_event_loop PARAMS ((void)); +extern void async_init_signals PARAMS ((void)); + /* This function returns a pointer to the string that is used by gdb for its command prompt. */ extern char *get_prompt PARAMS((void)); diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog index 9f6adf4424e..db62bb2edc4 100644 --- a/sim/arm/ChangeLog +++ b/sim/arm/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-06 Keith Seitz <keiths@cygnus.com> * wrapper.c (stop_simulator): New global. diff --git a/sim/arm/configure b/sim/arm/configure index e646fa8a499..0f8f463bab3 100755 --- a/sim/arm/configure +++ b/sim/arm/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 65e10705e81..26bd2359dc7 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,9 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * aclocal.m4: Use AC_EXEEXT instead of AM_EXEEXT. Delete defn of + AM_CYGWIN32 and AM_EXEEXT. + * configure: Regenerate. + Fri Apr 16 16:43:22 1999 Doug Evans <devans@charmed.cygnus.com> * sim-core.c (device_error,device_io_read_buffer, diff --git a/sim/common/aclocal.m4 b/sim/common/aclocal.m4 index e3b595aee91..b4526111782 100644 --- a/sim/common/aclocal.m4 +++ b/sim/common/aclocal.m4 @@ -207,7 +207,7 @@ dnl Types used by common code AC_TYPE_SIGNAL dnl Detect exe extension -AM_EXEEXT +AC_EXEEXT dnl These are available to append to as desired. sim_link_files= @@ -1176,51 +1176,6 @@ AC_DEFUN(AM_LC_MESSAGES, fi fi]) -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - -dnl AM_CYGWIN32() -dnl You might think we can do this by checking for a cygwin32-specific -dnl cpp define. -AC_DEFUN(AM_CYGWIN32, -[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32, -[AC_TRY_COMPILE(,[int main () { return __CYGWIN32__; }], -am_cv_cygwin32=yes, am_cv_cygwin32=no) -rm -f conftest*]) -CYGWIN32= -test "$am_cv_cygwin32" = yes && CYGWIN32=yes]) - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - -dnl AM_EXEEXT() -dnl This knows we add .exe if we're building in the Cygwin32 -dnl environment. But if we're not, then it compiles a test program -dnl to see if there is a suffix for executables. -AC_DEFUN(AM_EXEEXT, -dnl AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AM_CYGWIN32]) -AC_MSG_CHECKING([for executable suffix]) -[AC_CACHE_VAL(am_cv_exeext, -[if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test*]) -test x"${am_cv_exeext}" = x && am_cv_exeext=no -fi -EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -AC_MSG_RESULT(${am_cv_exeext}) -AC_SUBST(EXEEXT)]) - dnl --enable-cgen-maint support AC_DEFUN(SIM_AC_OPTION_CGEN_MAINT, diff --git a/sim/common/configure b/sim/common/configure index 4dc7670494a..1cd99d96770 100755 --- a/sim/common/configure +++ b/sim/common/configure @@ -119,20 +119,10 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -177,6 +167,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -291,6 +282,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -461,6 +453,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -482,7 +479,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -626,12 +623,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi # This is intended for use by the target specific directories, and by us. echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3030 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2982,17 +3061,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2986: checking for $ac_hdr" >&5 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2991 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2996: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3021,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3025: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3030 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3049,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3053: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3076,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3080: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3084,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3088 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3095,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3123,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3127: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3131,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3135 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3142,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3318,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3322: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3327 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3340,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3344: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3359,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3364: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3437,17 +3525,17 @@ for ac_hdr in stdlib.h string.h strings.h time.h sys/times.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3441: checking for $ac_hdr" >&5 +echo "configure:3529: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3446 "configure" +#line 3534 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3451: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3539: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3497,7 +3585,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3564,7 +3652,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3608,6 +3696,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3643,6 +3732,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/common/nltvals.def b/sim/common/nltvals.def index b5e82fcfb48..bed711cacfd 100644 --- a/sim/common/nltvals.def +++ b/sim/common/nltvals.def @@ -416,3 +416,27 @@ /* end v850 sys target macros */ #endif #endif +#ifdef NL_TARGET_venus +#ifdef sys_defs +/* from syscall.h */ +/* begin venus sys target macros */ + { "SYS_argv", 13 }, + { "SYS_argvlen", 12 }, + { "SYS_chdir", 14 }, + { "SYS_chmod", 16 }, + { "SYS_close", 3 }, + { "SYS_exit", 1 }, + { "SYS_fstat", 10 }, + { "SYS_getpid", 8 }, + { "SYS_kill", 9 }, + { "SYS_lseek", 6 }, + { "SYS_open", 2 }, + { "SYS_read", 4 }, + { "SYS_stat", 15 }, + { "SYS_time", 18 }, + { "SYS_unlink", 7 }, + { "SYS_utime", 17 }, + { "SYS_write", 5 }, +/* end venus sys target macros */ +#endif +#endif diff --git a/sim/d10v/ChangeLog b/sim/d10v/ChangeLog index 2c0297a6cf8..ca573b216c4 100644 --- a/sim/d10v/ChangeLog +++ b/sim/d10v/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-02 Keith Seitz <keiths@cygnus.com> * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK diff --git a/sim/d10v/configure b/sim/d10v/configure index c3b96cfd20e..42bd04eaceb 100755 --- a/sim/d10v/configure +++ b/sim/d10v/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -180,6 +170,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -294,6 +285,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -464,6 +456,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -485,7 +482,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -629,12 +626,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -675,7 +676,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:679: checking how to run the C preprocessor" >&5 +echo "configure:680: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -690,13 +691,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 694 "configure" +#line 695 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:701: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -707,13 +708,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 711 "configure" +#line 712 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -724,13 +725,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 728 "configure" +#line 729 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -755,7 +756,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:759: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:760: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -782,7 +783,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:786: checking for POSIXized ISC" >&5 +echo "configure:787: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -803,12 +804,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:807: checking for ANSI C header files" >&5 +echo "configure:808: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 812 "configure" +#line 813 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -816,7 +817,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:820: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -833,7 +834,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 837 "configure" +#line 838 "configure" #include "confdefs.h" #include <string.h> EOF @@ -851,7 +852,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 855 "configure" +#line 856 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -872,7 +873,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 876 "configure" +#line 877 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -883,7 +884,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:888: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -907,12 +908,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:911: checking for working const" >&5 +echo "configure:912: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 916 "configure" +#line 917 "configure" #include "confdefs.h" int main() { @@ -961,7 +962,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:965: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:966: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -982,21 +983,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:986: checking for inline" >&5 +echo "configure:987: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 993 "configure" +#line 994 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1001: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1022,12 +1023,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1026: checking for off_t" >&5 +echo "configure:1027: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1031 "configure" +#line 1032 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1036,7 +1037,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1055,12 +1056,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1059: checking for size_t" >&5 +echo "configure:1060: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1064 "configure" +#line 1065 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1069,7 +1070,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1090,19 +1091,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1094: checking for working alloca.h" >&5 +echo "configure:1095: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1099 "configure" +#line 1100 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1123,12 +1124,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1127: checking for alloca" >&5 +echo "configure:1128: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1132 "configure" +#line 1133 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1156,7 +1157,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1188,12 +1189,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1192: checking whether alloca needs Cray hooks" >&5 +echo "configure:1193: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1197 "configure" +#line 1198 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1218,12 +1219,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1222: checking for $ac_func" >&5 +echo "configure:1223: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1227 "configure" +#line 1228 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1246,7 +1247,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1273,7 +1274,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1277: checking stack direction for C alloca" >&5 +echo "configure:1278: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1281,7 +1282,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1285 "configure" +#line 1286 "configure" #include "confdefs.h" find_stack_direction () { @@ -1300,7 +1301,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1325,17 +1326,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1329: checking for $ac_hdr" >&5 +echo "configure:1330: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1334 "configure" +#line 1335 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1364,12 +1365,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1368: checking for $ac_func" >&5 +echo "configure:1369: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1373 "configure" +#line 1374 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1392,7 +1393,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1417,7 +1418,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1421: checking for working mmap" >&5 +echo "configure:1422: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1425,7 +1426,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1429 "configure" +#line 1430 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1565,7 +1566,7 @@ main() } EOF -if { (eval echo configure:1569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1587,6 +1588,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1593: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1598 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1609: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1626: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1631 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1638,7 +1701,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1642: checking host system type" >&5 +echo "configure:1705: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1659,7 +1722,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1663: checking target system type" >&5 +echo "configure:1726: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1677,7 +1740,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1681: checking build system type" >&5 +echo "configure:1744: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1721,7 +1784,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1725: checking for $ac_word" >&5 +echo "configure:1788: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1729,7 +1792,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1750,7 +1814,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1754: checking for $ac_word" >&5 +echo "configure:1818: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1759,7 +1823,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1800,7 +1865,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1804: checking for $ac_word" >&5 +echo "configure:1869: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1808,7 +1873,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1831,7 +1897,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1835: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1901: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1840,12 +1906,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1845 "configure" +cat > conftest.$ac_ext << EOF + +#line 1912 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1859,18 +1927,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1869: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1943: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1874: checking whether we are using GNU C" >&5 +echo "configure:1948: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1879,7 +1953,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1883: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1898,7 +1972,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1902: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1976: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1941,7 +2015,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1945: checking for a BSD compatible install" >&5 +echo "configure:2019: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1989,6 +2063,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2007,7 +2083,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2011: checking for $ac_word" >&5 +echo "configure:2087: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2015,7 +2091,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2041,17 +2118,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2045: checking for $ac_hdr" >&5 +echo "configure:2122: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2050 "configure" +#line 2127 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2081,12 +2158,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2085: checking for $ac_func" >&5 +echo "configure:2162: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2090 "configure" +#line 2167 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2109,7 +2186,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2138,12 +2215,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2142: checking for $ac_func" >&5 +echo "configure:2219: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2147 "configure" +#line 2224 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2166,7 +2243,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2200,19 +2277,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2204: checking for LC_MESSAGES" >&5 +echo "configure:2281: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2209 "configure" +#line 2286 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2233,7 +2310,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2237: checking whether NLS is requested" >&5 +echo "configure:2314: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2253,7 +2330,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2257: checking whether included gettext is requested" >&5 +echo "configure:2334: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2272,17 +2349,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2276: checking for libintl.h" >&5 +echo "configure:2353: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2281 "configure" +#line 2358 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2363: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2299,19 +2376,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2303: checking for gettext in libc" >&5 +echo "configure:2380: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2308 "configure" +#line 2385 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2327,7 +2404,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2331: checking for bindtextdomain in -lintl" >&5 +echo "configure:2408: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2335,7 +2412,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2339 "configure" +#line 2416 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2346,7 +2423,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2362,19 +2439,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2366: checking for gettext in libintl" >&5 +echo "configure:2443: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2371 "configure" +#line 2448 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2402,7 +2479,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2406: checking for $ac_word" >&5 +echo "configure:2483: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2436,12 +2513,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2440: checking for $ac_func" >&5 +echo "configure:2517: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2445 "configure" +#line 2522 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2464,7 +2541,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2491,7 +2568,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2495: checking for $ac_word" >&5 +echo "configure:2572: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2504,7 +2581,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2526,7 +2604,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2530: checking for $ac_word" >&5 +echo "configure:2608: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2558,7 +2636,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2562 "configure" +#line 2640 "configure" #include "confdefs.h" int main() { @@ -2566,7 +2644,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2598,7 +2676,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2602: checking for $ac_word" >&5 +echo "configure:2680: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2632,7 +2710,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2636: checking for $ac_word" >&5 +echo "configure:2714: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2645,7 +2723,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2667,7 +2746,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2671: checking for $ac_word" >&5 +echo "configure:2750: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2757,7 +2836,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2761: checking for catalogs to be installed" >&5 +echo "configure:2840: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2785,17 +2864,17 @@ echo "configure:2761: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2789: checking for linux/version.h" >&5 +echo "configure:2868: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2794 "configure" +#line 2873 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2799: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2864,17 +2943,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2868: checking for $ac_hdr" >&5 +echo "configure:2947: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2873 "configure" +#line 2952 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2878: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2904,17 +2983,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2908: checking for $ac_hdr" >&5 +echo "configure:2987: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2913 "configure" +#line 2992 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2918: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2944,17 +3023,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2948: checking for $ac_hdr" >&5 +echo "configure:3027: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3032 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3037: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3067: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2953 "configure" +#line 3072 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3077: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2983,12 +3102,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2987: checking for $ac_func" >&5 +echo "configure:3106: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2992 "configure" +#line 3111 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3011,7 +3130,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3038,7 +3157,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3042: checking for bind in -lsocket" >&5 +echo "configure:3161: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3046,7 +3165,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3050 "configure" +#line 3169 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3057,7 +3176,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3085,7 +3204,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3089: checking for gethostbyname in -lnsl" >&5 +echo "configure:3208: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3093,7 +3212,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3097 "configure" +#line 3216 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3104,7 +3223,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3280,12 +3399,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3284: checking return type of signal handlers" >&5 +echo "configure:3403: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3289 "configure" +#line 3408 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3302,7 +3421,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3306: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3321,29 +3440,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3326: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3447: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3392,17 +3520,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3396: checking for $ac_hdr" >&5 +echo "configure:3524: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3401 "configure" +#line 3529 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3406: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3455,7 +3583,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3522,7 +3650,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3566,6 +3694,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3601,6 +3730,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/d30v/ChangeLog b/sim/d30v/ChangeLog index 7687595c04b..19e2a19be3e 100644 --- a/sim/d30v/ChangeLog +++ b/sim/d30v/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-03-16 Martin Hunt <hunt@cygnus.com> From Frank Ch. Eigler <fche@cygnus.com> diff --git a/sim/d30v/configure b/sim/d30v/configure index 3e787aec29a..05e748e2399 100755 --- a/sim/d30v/configure +++ b/sim/d30v/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -192,6 +182,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -306,6 +297,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -476,6 +468,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -497,7 +494,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -641,12 +638,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -687,7 +688,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:691: checking how to run the C preprocessor" >&5 +echo "configure:692: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -702,13 +703,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 706 "configure" +#line 707 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -719,13 +720,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 723 "configure" +#line 724 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:729: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -736,13 +737,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 740 "configure" +#line 741 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:746: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:747: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -767,7 +768,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:771: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:772: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -794,7 +795,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:798: checking for POSIXized ISC" >&5 +echo "configure:799: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -815,12 +816,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:819: checking for ANSI C header files" >&5 +echo "configure:820: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 824 "configure" +#line 825 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -828,7 +829,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -845,7 +846,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 849 "configure" +#line 850 "configure" #include "confdefs.h" #include <string.h> EOF @@ -863,7 +864,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 867 "configure" +#line 868 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -884,7 +885,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 888 "configure" +#line 889 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -895,7 +896,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -919,12 +920,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:923: checking for working const" >&5 +echo "configure:924: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 928 "configure" +#line 929 "configure" #include "confdefs.h" int main() { @@ -973,7 +974,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:977: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -994,21 +995,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:998: checking for inline" >&5 +echo "configure:999: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1005 "configure" +#line 1006 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1012: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1034,12 +1035,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1038: checking for off_t" >&5 +echo "configure:1039: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1043 "configure" +#line 1044 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1048,7 +1049,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1067,12 +1068,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1071: checking for size_t" >&5 +echo "configure:1072: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1076 "configure" +#line 1077 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1081,7 +1082,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1102,19 +1103,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1106: checking for working alloca.h" >&5 +echo "configure:1107: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1111 "configure" +#line 1112 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1135,12 +1136,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1139: checking for alloca" >&5 +echo "configure:1140: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1144 "configure" +#line 1145 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1168,7 +1169,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1200,12 +1201,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1204: checking whether alloca needs Cray hooks" >&5 +echo "configure:1205: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1209 "configure" +#line 1210 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1230,12 +1231,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1234: checking for $ac_func" >&5 +echo "configure:1235: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1239 "configure" +#line 1240 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1258,7 +1259,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1285,7 +1286,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1289: checking stack direction for C alloca" >&5 +echo "configure:1290: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1293,7 +1294,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1297 "configure" +#line 1298 "configure" #include "confdefs.h" find_stack_direction () { @@ -1312,7 +1313,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1337,17 +1338,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1341: checking for $ac_hdr" >&5 +echo "configure:1342: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1346 "configure" +#line 1347 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1376,12 +1377,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1380: checking for $ac_func" >&5 +echo "configure:1381: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1385 "configure" +#line 1386 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1404,7 +1405,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1429,7 +1430,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1433: checking for working mmap" >&5 +echo "configure:1434: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1437,7 +1438,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1441 "configure" +#line 1442 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1577,7 +1578,7 @@ main() } EOF -if { (eval echo configure:1581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1599,6 +1600,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1605: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1610 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1621: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1638: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1643 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1650,7 +1713,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1654: checking host system type" >&5 +echo "configure:1717: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1671,7 +1734,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1675: checking target system type" >&5 +echo "configure:1738: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1689,7 +1752,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1693: checking build system type" >&5 +echo "configure:1756: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1733,7 +1796,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1737: checking for $ac_word" >&5 +echo "configure:1800: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1741,7 +1804,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1762,7 +1826,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1766: checking for $ac_word" >&5 +echo "configure:1830: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1771,7 +1835,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1812,7 +1877,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1816: checking for $ac_word" >&5 +echo "configure:1881: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1820,7 +1885,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1843,7 +1909,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1847: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1913: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1852,12 +1918,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1857 "configure" +cat > conftest.$ac_ext << EOF + +#line 1924 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1871,18 +1939,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1881: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1955: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1886: checking whether we are using GNU C" >&5 +echo "configure:1960: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1891,7 +1965,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1895: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1910,7 +1984,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1914: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1988: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1953,7 +2027,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1957: checking for a BSD compatible install" >&5 +echo "configure:2031: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2001,6 +2075,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2019,7 +2095,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2023: checking for $ac_word" >&5 +echo "configure:2099: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2027,7 +2103,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2053,17 +2130,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2057: checking for $ac_hdr" >&5 +echo "configure:2134: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2062 "configure" +#line 2139 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2093,12 +2170,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2097: checking for $ac_func" >&5 +echo "configure:2174: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2102 "configure" +#line 2179 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2121,7 +2198,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2150,12 +2227,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2154: checking for $ac_func" >&5 +echo "configure:2231: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2159 "configure" +#line 2236 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2178,7 +2255,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2212,19 +2289,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2216: checking for LC_MESSAGES" >&5 +echo "configure:2293: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2221 "configure" +#line 2298 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2245,7 +2322,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2249: checking whether NLS is requested" >&5 +echo "configure:2326: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2265,7 +2342,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2269: checking whether included gettext is requested" >&5 +echo "configure:2346: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2284,17 +2361,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2288: checking for libintl.h" >&5 +echo "configure:2365: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2293 "configure" +#line 2370 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2298: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2311,19 +2388,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2315: checking for gettext in libc" >&5 +echo "configure:2392: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2320 "configure" +#line 2397 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2339,7 +2416,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2343: checking for bindtextdomain in -lintl" >&5 +echo "configure:2420: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2347,7 +2424,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2351 "configure" +#line 2428 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2358,7 +2435,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2374,19 +2451,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2378: checking for gettext in libintl" >&5 +echo "configure:2455: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2383 "configure" +#line 2460 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2414,7 +2491,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2418: checking for $ac_word" >&5 +echo "configure:2495: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2448,12 +2525,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2452: checking for $ac_func" >&5 +echo "configure:2529: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2457 "configure" +#line 2534 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2476,7 +2553,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2503,7 +2580,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2507: checking for $ac_word" >&5 +echo "configure:2584: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2516,7 +2593,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2538,7 +2616,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2542: checking for $ac_word" >&5 +echo "configure:2620: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2570,7 +2648,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2574 "configure" +#line 2652 "configure" #include "confdefs.h" int main() { @@ -2578,7 +2656,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2610,7 +2688,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2614: checking for $ac_word" >&5 +echo "configure:2692: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2644,7 +2722,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2648: checking for $ac_word" >&5 +echo "configure:2726: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2657,7 +2735,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2679,7 +2758,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2683: checking for $ac_word" >&5 +echo "configure:2762: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2769,7 +2848,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2773: checking for catalogs to be installed" >&5 +echo "configure:2852: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2797,17 +2876,17 @@ echo "configure:2773: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2801: checking for linux/version.h" >&5 +echo "configure:2880: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2806 "configure" +#line 2885 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2876,17 +2955,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2880: checking for $ac_hdr" >&5 +echo "configure:2959: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2885 "configure" +#line 2964 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2916,17 +2995,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2920: checking for $ac_hdr" >&5 +echo "configure:2999: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2925 "configure" +#line 3004 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2956,17 +3035,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2960: checking for $ac_hdr" >&5 +echo "configure:3039: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3044 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3049: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3079: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2965 "configure" +#line 3084 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2970: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2995,12 +3114,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2999: checking for $ac_func" >&5 +echo "configure:3118: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3004 "configure" +#line 3123 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3023,7 +3142,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3050,7 +3169,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3054: checking for bind in -lsocket" >&5 +echo "configure:3173: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3058,7 +3177,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3062 "configure" +#line 3181 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3069,7 +3188,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3097,7 +3216,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3101: checking for gethostbyname in -lnsl" >&5 +echo "configure:3220: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3105,7 +3224,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3109 "configure" +#line 3228 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3116,7 +3235,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3292,12 +3411,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3296: checking return type of signal handlers" >&5 +echo "configure:3415: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3301 "configure" +#line 3420 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3314,7 +3433,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3318: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3333,29 +3452,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3338: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3459: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3383,7 +3511,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3387: checking for $ac_word" >&5 +echo "configure:3515: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_M4'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3396,7 +3524,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_M4="$ac_dir/$ac_word" @@ -3574,14 +3703,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3578: checking whether byte ordering is bigendian" >&5 +echo "configure:3707: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3585 "configure" +#line 3714 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3592,11 +3721,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3725: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3600 "configure" +#line 3729 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3607,7 +3736,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3611: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3740: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3627,7 +3756,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3631 "configure" +#line 3760 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3640,7 +3769,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3737,17 +3866,17 @@ for ac_hdr in stdlib.h unistd.h string.h strings.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3741: checking for $ac_hdr" >&5 +echo "configure:3870: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3746 "configure" +#line 3875 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3880: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3800,7 +3929,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3867,7 +3996,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3911,6 +4040,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3946,6 +4076,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/erc32/ChangeLog b/sim/erc32/ChangeLog index 4375a585c3d..b39ff8b3d77 100644 --- a/sim/erc32/ChangeLog +++ b/sim/erc32/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-03-03 DJ Delorie <dj@cygnus.com> * configure.in: add termcap and -luser32 for host=cygwin diff --git a/sim/erc32/configure b/sim/erc32/configure index d08ac331110..7594504ccd6 100755 --- a/sim/erc32/configure +++ b/sim/erc32/configure @@ -119,18 +119,6 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - - - @@ -180,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -294,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -464,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -629,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -675,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:679: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -690,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 694 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -707,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 711 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -724,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 728 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -755,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:759: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -782,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:786: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -803,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:807: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 812 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -816,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:820: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -833,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 837 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -851,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 855 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -872,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 876 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -883,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -907,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:911: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 916 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -961,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:965: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -982,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:986: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 993 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1000: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1022,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1026: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1031 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1055,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1059: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1064 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1090,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1094: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1099 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1123,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1127: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1132 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1156,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1188,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1192: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1197 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1218,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1222: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1227 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1246,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1273,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1277: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1281,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1285 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1300,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1325,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1329: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1334 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1364,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1368: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1373 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1392,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1417,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1421: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1425,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1429 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1565,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1587,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1638,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1642: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1659,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1663: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1677,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1681: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1721,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1725: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1751,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1755: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1802,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1806: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1834,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1838: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1845,12 +1906,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1849 "configure" +#line 1910 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1876,12 +1937,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1880: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1885: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1890,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1909,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1913: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1952,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1956: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2020,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2024: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2055,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2059: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2064 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2095,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2099: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2104 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2123,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2152,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2156: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2161 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2180,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2214,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2218: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2223 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2247,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2251: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2267,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2271: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2286,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2290: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2295 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2300: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2313,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2317: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2322 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2341,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2345: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2349,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2353 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2360,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2376,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2380: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2385 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2416,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2420: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2450,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2454: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2459 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2478,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2482: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2505,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2509: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2541,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2545: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2573,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2577 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2581,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2613,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2617: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2647,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2651: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2683,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2687: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2773,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2777: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2801,17 +2862,17 @@ echo "configure:2777: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2805: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2810 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2880,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2884: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2889 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2920,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2924: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2929 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2934: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2960,17 +3021,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2964: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2969 "configure" +#line 3030 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3000,17 +3061,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3004: checking for $ac_hdr" >&5 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3009 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3039,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3043: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3067,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3094,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3098: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3102,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3106 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3113,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3141,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3145: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3149,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3153 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3160,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3336,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3340: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3345 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3358,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3377,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3382: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3426,17 +3496,17 @@ for ac_hdr in stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3430: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3435 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3440: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3465,12 +3535,12 @@ done # In the Cygwin environment, we need some additional flags. echo $ac_n "checking for cygwin""... $ac_c" 1>&6 -echo "configure:3469: checking for cygwin" >&5 +echo "configure:3539: checking for cygwin" >&5 if eval "test \"`echo '$''{'sim_cv_os_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3474 "configure" +#line 3544 "configure" #include "confdefs.h" #ifdef __CYGWIN__ @@ -3495,7 +3565,7 @@ if test x$sim_cv_os_cygwin = xyes; then TERMCAP='`if test -r ../../libtermcap/libtermcap.a; then echo ../../libtermcap/libtermcap.a; else echo -ltermcap; fi` -luser32' else echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6 -echo "configure:3499: checking for main in -ltermcap" >&5 +echo "configure:3569: checking for main in -ltermcap" >&5 ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3503,14 +3573,14 @@ else ac_save_LIBS="$LIBS" LIBS="-ltermcap $LIBS" cat > conftest.$ac_ext <<EOF -#line 3507 "configure" +#line 3577 "configure" #include "confdefs.h" int main() { main() ; return 0; } EOF -if { (eval echo configure:3514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else diff --git a/sim/fr30/ChangeLog b/sim/fr30/ChangeLog index 7d0f18d0c27..7951762e8f8 100644 --- a/sim/fr30/ChangeLog +++ b/sim/fr30/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Fri Apr 16 16:50:31 1999 Doug Evans <devans@charmed.cygnus.com> * devices.c (device_io_read_buffer): New arg `sd'. diff --git a/sim/fr30/configure b/sim/fr30/configure index b650e0c427b..cefac97bbc4 100644 --- a/sim/fr30/configure +++ b/sim/fr30/configure @@ -119,18 +119,6 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - - - @@ -194,6 +182,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -308,6 +297,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -478,6 +468,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -643,12 +638,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -689,7 +688,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:693: checking how to run the C preprocessor" >&5 +echo "configure:692: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -704,13 +703,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 708 "configure" +#line 707 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:714: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -721,13 +720,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 725 "configure" +#line 724 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:731: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -738,13 +737,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 742 "configure" +#line 741 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:748: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:747: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -769,7 +768,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:773: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:772: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -796,7 +795,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:800: checking for POSIXized ISC" >&5 +echo "configure:799: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -817,12 +816,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:821: checking for ANSI C header files" >&5 +echo "configure:820: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 826 "configure" +#line 825 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -830,7 +829,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:834: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -847,7 +846,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 851 "configure" +#line 850 "configure" #include "confdefs.h" #include <string.h> EOF @@ -865,7 +864,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 869 "configure" +#line 868 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -886,7 +885,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 890 "configure" +#line 889 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -897,7 +896,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -921,12 +920,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:925: checking for working const" >&5 +echo "configure:924: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 930 "configure" +#line 929 "configure" #include "confdefs.h" int main() { @@ -975,7 +974,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -996,21 +995,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1000: checking for inline" >&5 +echo "configure:999: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1007 "configure" +#line 1006 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1036,12 +1035,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1040: checking for off_t" >&5 +echo "configure:1039: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1045 "configure" +#line 1044 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1069,12 +1068,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1073: checking for size_t" >&5 +echo "configure:1072: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1078 "configure" +#line 1077 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1104,19 +1103,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1108: checking for working alloca.h" >&5 +echo "configure:1107: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1113 "configure" +#line 1112 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1137,12 +1136,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1141: checking for alloca" >&5 +echo "configure:1140: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1146 "configure" +#line 1145 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1170,7 +1169,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1202,12 +1201,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1206: checking whether alloca needs Cray hooks" >&5 +echo "configure:1205: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1211 "configure" +#line 1210 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1232,12 +1231,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1236: checking for $ac_func" >&5 +echo "configure:1235: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1241 "configure" +#line 1240 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1260,7 +1259,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1287,7 +1286,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1291: checking stack direction for C alloca" >&5 +echo "configure:1290: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1295,7 +1294,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1299 "configure" +#line 1298 "configure" #include "confdefs.h" find_stack_direction () { @@ -1314,7 +1313,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1339,17 +1338,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1343: checking for $ac_hdr" >&5 +echo "configure:1342: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1348 "configure" +#line 1347 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1353: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1378,12 +1377,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1382: checking for $ac_func" >&5 +echo "configure:1381: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1387 "configure" +#line 1386 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1406,7 +1405,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1431,7 +1430,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1435: checking for working mmap" >&5 +echo "configure:1434: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1439,7 +1438,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1443 "configure" +#line 1442 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1579,7 +1578,7 @@ main() } EOF -if { (eval echo configure:1583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1601,6 +1600,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1605: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1610 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1621: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1638: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1643 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1652,7 +1713,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1656: checking host system type" >&5 +echo "configure:1717: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1673,7 +1734,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1677: checking target system type" >&5 +echo "configure:1738: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1691,7 +1752,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1695: checking build system type" >&5 +echo "configure:1756: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1735,7 +1796,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1739: checking for $ac_word" >&5 +echo "configure:1800: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1765,7 +1826,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1769: checking for $ac_word" >&5 +echo "configure:1830: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1816,7 +1877,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1820: checking for $ac_word" >&5 +echo "configure:1881: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1848,7 +1909,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1852: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1913: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1859,12 +1920,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1863 "configure" +#line 1924 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1890,12 +1951,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1894: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1955: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1899: checking whether we are using GNU C" >&5 +echo "configure:1960: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1904,7 +1965,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1923,7 +1984,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1927: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1988: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1966,7 +2027,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1970: checking for a BSD compatible install" >&5 +echo "configure:2031: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2034,7 +2095,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2038: checking for $ac_word" >&5 +echo "configure:2099: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2069,17 +2130,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2073: checking for $ac_hdr" >&5 +echo "configure:2134: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2078 "configure" +#line 2139 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2083: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2109,12 +2170,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2113: checking for $ac_func" >&5 +echo "configure:2174: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2118 "configure" +#line 2179 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2137,7 +2198,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2166,12 +2227,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2170: checking for $ac_func" >&5 +echo "configure:2231: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2175 "configure" +#line 2236 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2194,7 +2255,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2198: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2228,19 +2289,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2232: checking for LC_MESSAGES" >&5 +echo "configure:2293: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2237 "configure" +#line 2298 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2261,7 +2322,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2265: checking whether NLS is requested" >&5 +echo "configure:2326: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2281,7 +2342,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2285: checking whether included gettext is requested" >&5 +echo "configure:2346: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2300,17 +2361,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2304: checking for libintl.h" >&5 +echo "configure:2365: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2309 "configure" +#line 2370 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2327,19 +2388,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2331: checking for gettext in libc" >&5 +echo "configure:2392: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2336 "configure" +#line 2397 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2355,7 +2416,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2359: checking for bindtextdomain in -lintl" >&5 +echo "configure:2420: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2363,7 +2424,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2367 "configure" +#line 2428 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2374,7 +2435,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2390,19 +2451,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2394: checking for gettext in libintl" >&5 +echo "configure:2455: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2399 "configure" +#line 2460 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2430,7 +2491,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2434: checking for $ac_word" >&5 +echo "configure:2495: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2464,12 +2525,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2468: checking for $ac_func" >&5 +echo "configure:2529: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2473 "configure" +#line 2534 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2492,7 +2553,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2519,7 +2580,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2523: checking for $ac_word" >&5 +echo "configure:2584: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2555,7 +2616,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2559: checking for $ac_word" >&5 +echo "configure:2620: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2587,7 +2648,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2591 "configure" +#line 2652 "configure" #include "confdefs.h" int main() { @@ -2595,7 +2656,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2627,7 +2688,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2631: checking for $ac_word" >&5 +echo "configure:2692: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2661,7 +2722,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2665: checking for $ac_word" >&5 +echo "configure:2726: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2697,7 +2758,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2701: checking for $ac_word" >&5 +echo "configure:2762: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2787,7 +2848,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2791: checking for catalogs to be installed" >&5 +echo "configure:2852: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2815,17 +2876,17 @@ echo "configure:2791: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2819: checking for linux/version.h" >&5 +echo "configure:2880: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2824 "configure" +#line 2885 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2894,17 +2955,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2898: checking for $ac_hdr" >&5 +echo "configure:2959: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2903 "configure" +#line 2964 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2934,17 +2995,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2938: checking for $ac_hdr" >&5 +echo "configure:2999: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2943 "configure" +#line 3004 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2974,17 +3035,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2978: checking for $ac_hdr" >&5 +echo "configure:3039: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2983 "configure" +#line 3044 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3049: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3014,17 +3075,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3018: checking for $ac_hdr" >&5 +echo "configure:3079: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3023 "configure" +#line 3084 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3053,12 +3114,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3057: checking for $ac_func" >&5 +echo "configure:3118: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3062 "configure" +#line 3123 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3081,7 +3142,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3108,7 +3169,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3112: checking for bind in -lsocket" >&5 +echo "configure:3173: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3116,7 +3177,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3120 "configure" +#line 3181 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3127,7 +3188,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3155,7 +3216,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3159: checking for gethostbyname in -lnsl" >&5 +echo "configure:3220: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3163,7 +3224,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3167 "configure" +#line 3228 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3174,7 +3235,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3350,12 +3411,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3354: checking return type of signal handlers" >&5 +echo "configure:3415: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3359 "configure" +#line 3420 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3372,7 +3433,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3376: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3391,29 +3452,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3396: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3459: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3546,14 +3616,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3550: checking whether byte ordering is bigendian" >&5 +echo "configure:3620: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3557 "configure" +#line 3627 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3564,11 +3634,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3572 "configure" +#line 3642 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3579,7 +3649,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3599,7 +3669,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3603 "configure" +#line 3673 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3612,7 +3682,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else diff --git a/sim/h8300/ChangeLog b/sim/h8300/ChangeLog index f058ca901ff..612a74321f7 100644 --- a/sim/h8300/ChangeLog +++ b/sim/h8300/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-02 Keith Seitz <keiths@cygnus.com> * compile.c (POLL_QUIT_INTERVAL): Define. Used to tweak the diff --git a/sim/h8300/configure b/sim/h8300/configure index c13505a978f..1f9568932c9 100755 --- a/sim/h8300/configure +++ b/sim/h8300/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in stdlib.h time.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/h8500/ChangeLog b/sim/h8500/ChangeLog index 92511edbdbb..5c9b4316970 100644 --- a/sim/h8500/ChangeLog +++ b/sim/h8500/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> * configure: Regenerated to track ../common/aclocal.m4 changes. diff --git a/sim/h8500/configure b/sim/h8500/configure index 7e4cfb07b25..c153f1a7102 100755 --- a/sim/h8500/configure +++ b/sim/h8500/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in stdlib.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/i960/ChangeLog b/sim/i960/ChangeLog index 837233c0947..4978b8b3998 100644 --- a/sim/i960/ChangeLog +++ b/sim/i960/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Fri Apr 16 16:50:31 1999 Doug Evans <devans@charmed.cygnus.com> * devices.c (device_io_read_buffer): New arg `sd'. diff --git a/sim/i960/configure b/sim/i960/configure index a0f084790ca..47b810c22dd 100755 --- a/sim/i960/configure +++ b/sim/i960/configure @@ -119,18 +119,6 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - - - @@ -194,6 +182,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -308,6 +297,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -478,6 +468,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -643,12 +638,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -689,7 +688,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:693: checking how to run the C preprocessor" >&5 +echo "configure:692: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -704,13 +703,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 708 "configure" +#line 707 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:714: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -721,13 +720,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 725 "configure" +#line 724 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:731: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -738,13 +737,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 742 "configure" +#line 741 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:748: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:747: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -769,7 +768,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:773: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:772: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -796,7 +795,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:800: checking for POSIXized ISC" >&5 +echo "configure:799: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -817,12 +816,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:821: checking for ANSI C header files" >&5 +echo "configure:820: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 826 "configure" +#line 825 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -830,7 +829,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:834: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -847,7 +846,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 851 "configure" +#line 850 "configure" #include "confdefs.h" #include <string.h> EOF @@ -865,7 +864,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 869 "configure" +#line 868 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -886,7 +885,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 890 "configure" +#line 889 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -897,7 +896,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -921,12 +920,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:925: checking for working const" >&5 +echo "configure:924: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 930 "configure" +#line 929 "configure" #include "confdefs.h" int main() { @@ -975,7 +974,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:979: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -996,21 +995,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1000: checking for inline" >&5 +echo "configure:999: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1007 "configure" +#line 1006 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1036,12 +1035,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1040: checking for off_t" >&5 +echo "configure:1039: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1045 "configure" +#line 1044 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1069,12 +1068,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1073: checking for size_t" >&5 +echo "configure:1072: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1078 "configure" +#line 1077 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1104,19 +1103,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1108: checking for working alloca.h" >&5 +echo "configure:1107: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1113 "configure" +#line 1112 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1137,12 +1136,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1141: checking for alloca" >&5 +echo "configure:1140: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1146 "configure" +#line 1145 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1170,7 +1169,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1202,12 +1201,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1206: checking whether alloca needs Cray hooks" >&5 +echo "configure:1205: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1211 "configure" +#line 1210 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1232,12 +1231,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1236: checking for $ac_func" >&5 +echo "configure:1235: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1241 "configure" +#line 1240 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1260,7 +1259,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1287,7 +1286,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1291: checking stack direction for C alloca" >&5 +echo "configure:1290: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1295,7 +1294,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1299 "configure" +#line 1298 "configure" #include "confdefs.h" find_stack_direction () { @@ -1314,7 +1313,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1339,17 +1338,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1343: checking for $ac_hdr" >&5 +echo "configure:1342: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1348 "configure" +#line 1347 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1353: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1378,12 +1377,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1382: checking for $ac_func" >&5 +echo "configure:1381: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1387 "configure" +#line 1386 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1406,7 +1405,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1410: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1431,7 +1430,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1435: checking for working mmap" >&5 +echo "configure:1434: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1439,7 +1438,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1443 "configure" +#line 1442 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1579,7 +1578,7 @@ main() } EOF -if { (eval echo configure:1583: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1601,6 +1600,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1605: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1610 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1621: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1638: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1643 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1652,7 +1713,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1656: checking host system type" >&5 +echo "configure:1717: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1673,7 +1734,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1677: checking target system type" >&5 +echo "configure:1738: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1691,7 +1752,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1695: checking build system type" >&5 +echo "configure:1756: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1735,7 +1796,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1739: checking for $ac_word" >&5 +echo "configure:1800: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1765,7 +1826,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1769: checking for $ac_word" >&5 +echo "configure:1830: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1816,7 +1877,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1820: checking for $ac_word" >&5 +echo "configure:1881: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1848,7 +1909,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1852: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1913: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1859,12 +1920,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1863 "configure" +#line 1924 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1890,12 +1951,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1894: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1955: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1899: checking whether we are using GNU C" >&5 +echo "configure:1960: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1904,7 +1965,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1923,7 +1984,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1927: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1988: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1966,7 +2027,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1970: checking for a BSD compatible install" >&5 +echo "configure:2031: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2034,7 +2095,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2038: checking for $ac_word" >&5 +echo "configure:2099: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2069,17 +2130,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2073: checking for $ac_hdr" >&5 +echo "configure:2134: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2078 "configure" +#line 2139 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2083: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2109,12 +2170,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2113: checking for $ac_func" >&5 +echo "configure:2174: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2118 "configure" +#line 2179 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2137,7 +2198,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2166,12 +2227,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2170: checking for $ac_func" >&5 +echo "configure:2231: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2175 "configure" +#line 2236 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2194,7 +2255,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2198: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2228,19 +2289,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2232: checking for LC_MESSAGES" >&5 +echo "configure:2293: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2237 "configure" +#line 2298 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2261,7 +2322,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2265: checking whether NLS is requested" >&5 +echo "configure:2326: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2281,7 +2342,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2285: checking whether included gettext is requested" >&5 +echo "configure:2346: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2300,17 +2361,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2304: checking for libintl.h" >&5 +echo "configure:2365: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2309 "configure" +#line 2370 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2327,19 +2388,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2331: checking for gettext in libc" >&5 +echo "configure:2392: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2336 "configure" +#line 2397 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2355,7 +2416,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2359: checking for bindtextdomain in -lintl" >&5 +echo "configure:2420: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2363,7 +2424,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2367 "configure" +#line 2428 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2374,7 +2435,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2439: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2390,19 +2451,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2394: checking for gettext in libintl" >&5 +echo "configure:2455: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2399 "configure" +#line 2460 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2430,7 +2491,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2434: checking for $ac_word" >&5 +echo "configure:2495: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2464,12 +2525,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2468: checking for $ac_func" >&5 +echo "configure:2529: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2473 "configure" +#line 2534 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2492,7 +2553,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2519,7 +2580,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2523: checking for $ac_word" >&5 +echo "configure:2584: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2555,7 +2616,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2559: checking for $ac_word" >&5 +echo "configure:2620: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2587,7 +2648,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2591 "configure" +#line 2652 "configure" #include "confdefs.h" int main() { @@ -2595,7 +2656,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2627,7 +2688,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2631: checking for $ac_word" >&5 +echo "configure:2692: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2661,7 +2722,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2665: checking for $ac_word" >&5 +echo "configure:2726: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2697,7 +2758,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2701: checking for $ac_word" >&5 +echo "configure:2762: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2787,7 +2848,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2791: checking for catalogs to be installed" >&5 +echo "configure:2852: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2815,17 +2876,17 @@ echo "configure:2791: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2819: checking for linux/version.h" >&5 +echo "configure:2880: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2824 "configure" +#line 2885 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2894,17 +2955,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2898: checking for $ac_hdr" >&5 +echo "configure:2959: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2903 "configure" +#line 2964 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2934,17 +2995,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2938: checking for $ac_hdr" >&5 +echo "configure:2999: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2943 "configure" +#line 3004 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2974,17 +3035,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2978: checking for $ac_hdr" >&5 +echo "configure:3039: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2983 "configure" +#line 3044 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3049: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3014,17 +3075,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3018: checking for $ac_hdr" >&5 +echo "configure:3079: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3023 "configure" +#line 3084 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3053,12 +3114,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3057: checking for $ac_func" >&5 +echo "configure:3118: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3062 "configure" +#line 3123 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3081,7 +3142,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3108,7 +3169,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3112: checking for bind in -lsocket" >&5 +echo "configure:3173: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3116,7 +3177,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3120 "configure" +#line 3181 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3127,7 +3188,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3155,7 +3216,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3159: checking for gethostbyname in -lnsl" >&5 +echo "configure:3220: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3163,7 +3224,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3167 "configure" +#line 3228 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3174,7 +3235,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3350,12 +3411,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3354: checking return type of signal handlers" >&5 +echo "configure:3415: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3359 "configure" +#line 3420 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3372,7 +3433,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3376: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3437: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3391,29 +3452,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3396: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3459: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3546,14 +3616,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3550: checking whether byte ordering is bigendian" >&5 +echo "configure:3620: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3557 "configure" +#line 3627 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3564,11 +3634,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3572 "configure" +#line 3642 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3579,7 +3649,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3599,7 +3669,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3603 "configure" +#line 3673 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3612,7 +3682,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3686: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else diff --git a/sim/igen/ChangeLog b/sim/igen/ChangeLog index 43ba1505e7e..321bd38861b 100644 --- a/sim/igen/ChangeLog +++ b/sim/igen/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Fri Dec 4 15:14:09 1998 Andrew Cagney <cagney@b1.cygnus.com> * igen.c (main): Fix -Pitable=. diff --git a/sim/igen/configure b/sim/igen/configure index 2d4f4ec90fc..f64f7116b9d 100755 --- a/sim/igen/configure +++ b/sim/igen/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -162,6 +152,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -276,6 +267,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -446,6 +438,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -467,7 +464,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -611,12 +608,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -687,7 +688,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:691: checking for a BSD compatible install" >&5 +echo "configure:692: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -735,12 +736,14 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:744: checking for $ac_word" >&5 +echo "configure:747: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -748,7 +751,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -769,7 +773,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:773: checking for $ac_word" >&5 +echo "configure:777: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -778,7 +782,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -819,7 +824,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:823: checking for $ac_word" >&5 +echo "configure:828: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -827,7 +832,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -850,7 +856,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:854: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:860: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -859,12 +865,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 864 "configure" +cat > conftest.$ac_ext << EOF + +#line 871 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -878,18 +886,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:888: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:902: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:893: checking whether we are using GNU C" >&5 +echo "configure:907: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -898,7 +912,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -917,7 +931,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:921: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:935: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1036,7 +1050,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1040: checking host system type" >&5 +echo "configure:1054: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1057,7 +1071,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1061: checking target system type" >&5 +echo "configure:1075: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1075,7 +1089,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1079: checking build system type" >&5 +echo "configure:1093: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1122,7 +1136,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1126: checking how to run the C preprocessor" >&5 +echo "configure:1140: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1137,13 +1151,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1141 "configure" +#line 1155 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1147: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1154,13 +1168,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1158 "configure" +#line 1172 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1164: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1171,13 +1185,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 1175 "configure" +#line 1189 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1205,17 +1219,17 @@ for ac_hdr in stdlib.h string.h strings.h sys/stat.h sys/types.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1209: checking for $ac_hdr" >&5 +echo "configure:1223: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1214 "configure" +#line 1228 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1219: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1233: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1246,12 +1260,12 @@ for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 -echo "configure:1250: checking for $ac_hdr that defines DIR" >&5 +echo "configure:1264: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1255 "configure" +#line 1269 "configure" #include "confdefs.h" #include <sys/types.h> #include <$ac_hdr> @@ -1259,7 +1273,7 @@ int main() { DIR *dirp = 0; ; return 0; } EOF -if { (eval echo configure:1263: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else @@ -1284,7 +1298,7 @@ done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 -echo "configure:1288: checking for opendir in -ldir" >&5 +echo "configure:1302: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1292,7 +1306,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <<EOF -#line 1296 "configure" +#line 1310 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -1303,7 +1317,7 @@ int main() { opendir() ; return 0; } EOF -if { (eval echo configure:1307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -1325,7 +1339,7 @@ fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 -echo "configure:1329: checking for opendir in -lx" >&5 +echo "configure:1343: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1333,7 +1347,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <<EOF -#line 1337 "configure" +#line 1351 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -1344,7 +1358,7 @@ int main() { opendir() ; return 0; } EOF -if { (eval echo configure:1348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -1379,7 +1393,7 @@ fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1383: checking for $ac_word" >&5 +echo "configure:1397: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1387,7 +1401,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -1429,7 +1444,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -1496,7 +1511,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1540,6 +1555,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -1559,6 +1575,7 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC@%$CC%g s%@host@%$host%g diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog index 010f2a4d1c0..2202b86189c 100644 --- a/sim/m32r/ChangeLog +++ b/sim/m32r/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Fri Apr 16 16:47:43 1999 Doug Evans <devans@charmed.cygnus.com> * devices.c (device_io_read_buffer): New arg `sd'. diff --git a/sim/m32r/configure b/sim/m32r/configure index d1fdb9ee123..ba4aff05c8d 100755 --- a/sim/m32r/configure +++ b/sim/m32r/configure @@ -119,23 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - - - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -196,6 +184,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -310,6 +299,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -480,6 +470,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -501,7 +496,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -645,12 +640,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -691,7 +690,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:695: checking how to run the C preprocessor" >&5 +echo "configure:694: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -706,13 +705,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 710 "configure" +#line 709 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -723,13 +722,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 727 "configure" +#line 726 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -740,13 +739,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 744 "configure" +#line 743 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -771,7 +770,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:775: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:774: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -798,7 +797,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:802: checking for POSIXized ISC" >&5 +echo "configure:801: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -819,12 +818,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:823: checking for ANSI C header files" >&5 +echo "configure:822: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 828 "configure" +#line 827 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -832,7 +831,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:835: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -849,7 +848,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 852 "configure" #include "confdefs.h" #include <string.h> EOF @@ -867,7 +866,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 871 "configure" +#line 870 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -888,7 +887,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 892 "configure" +#line 891 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -899,7 +898,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -923,12 +922,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:927: checking for working const" >&5 +echo "configure:926: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 932 "configure" +#line 931 "configure" #include "confdefs.h" int main() { @@ -977,7 +976,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -998,21 +997,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1002: checking for inline" >&5 +echo "configure:1001: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1009 "configure" +#line 1008 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1038,12 +1037,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1042: checking for off_t" >&5 +echo "configure:1041: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1047 "configure" +#line 1046 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1052,7 +1051,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1071,12 +1070,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1075: checking for size_t" >&5 +echo "configure:1074: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1080 "configure" +#line 1079 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1085,7 +1084,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1106,19 +1105,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1110: checking for working alloca.h" >&5 +echo "configure:1109: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1115 "configure" +#line 1114 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1139,12 +1138,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1143: checking for alloca" >&5 +echo "configure:1142: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1148 "configure" +#line 1147 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1172,7 +1171,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1175: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1204,12 +1203,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1208: checking whether alloca needs Cray hooks" >&5 +echo "configure:1207: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1213 "configure" +#line 1212 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1234,12 +1233,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1238: checking for $ac_func" >&5 +echo "configure:1237: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1243 "configure" +#line 1242 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1262,7 +1261,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1289,7 +1288,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1293: checking stack direction for C alloca" >&5 +echo "configure:1292: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1297,7 +1296,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1301 "configure" +#line 1300 "configure" #include "confdefs.h" find_stack_direction () { @@ -1316,7 +1315,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1341,17 +1340,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1345: checking for $ac_hdr" >&5 +echo "configure:1344: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1350 "configure" +#line 1349 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1355: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1354: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1380,12 +1379,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1384: checking for $ac_func" >&5 +echo "configure:1383: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1389 "configure" +#line 1388 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1408,7 +1407,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1433,7 +1432,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1437: checking for working mmap" >&5 +echo "configure:1436: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1441,7 +1440,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1445 "configure" +#line 1444 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1581,7 +1580,7 @@ main() } EOF -if { (eval echo configure:1585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1603,6 +1602,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1607: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1612 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1623: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1640: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1645 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1654,7 +1715,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1658: checking host system type" >&5 +echo "configure:1719: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1675,7 +1736,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1679: checking target system type" >&5 +echo "configure:1740: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1693,7 +1754,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1697: checking build system type" >&5 +echo "configure:1758: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1737,7 +1798,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1741: checking for $ac_word" >&5 +echo "configure:1802: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1745,7 +1806,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1766,7 +1828,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1770: checking for $ac_word" >&5 +echo "configure:1832: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1775,7 +1837,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1816,7 +1879,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1820: checking for $ac_word" >&5 +echo "configure:1883: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1824,7 +1887,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1847,7 +1911,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1851: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1915: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1856,12 +1920,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1861 "configure" +cat > conftest.$ac_ext << EOF + +#line 1926 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1875,18 +1941,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1885: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1957: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1890: checking whether we are using GNU C" >&5 +echo "configure:1962: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1895,7 +1967,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1899: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1914,7 +1986,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1918: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1990: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1957,7 +2029,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1961: checking for a BSD compatible install" >&5 +echo "configure:2033: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2005,6 +2077,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2023,7 +2097,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2027: checking for $ac_word" >&5 +echo "configure:2101: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2031,7 +2105,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2057,17 +2132,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2061: checking for $ac_hdr" >&5 +echo "configure:2136: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2066 "configure" +#line 2141 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2097,12 +2172,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2101: checking for $ac_func" >&5 +echo "configure:2176: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2106 "configure" +#line 2181 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2125,7 +2200,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2154,12 +2229,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2158: checking for $ac_func" >&5 +echo "configure:2233: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2163 "configure" +#line 2238 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2182,7 +2257,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2216,19 +2291,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2220: checking for LC_MESSAGES" >&5 +echo "configure:2295: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2225 "configure" +#line 2300 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2307: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2249,7 +2324,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2253: checking whether NLS is requested" >&5 +echo "configure:2328: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2269,7 +2344,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2273: checking whether included gettext is requested" >&5 +echo "configure:2348: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2288,17 +2363,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2292: checking for libintl.h" >&5 +echo "configure:2367: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2297 "configure" +#line 2372 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2377: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2315,19 +2390,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2319: checking for gettext in libc" >&5 +echo "configure:2394: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2324 "configure" +#line 2399 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2343,7 +2418,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2347: checking for bindtextdomain in -lintl" >&5 +echo "configure:2422: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2351,7 +2426,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2355 "configure" +#line 2430 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2362,7 +2437,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2378,19 +2453,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2382: checking for gettext in libintl" >&5 +echo "configure:2457: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2387 "configure" +#line 2462 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2418,7 +2493,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2422: checking for $ac_word" >&5 +echo "configure:2497: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2452,12 +2527,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2456: checking for $ac_func" >&5 +echo "configure:2531: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2461 "configure" +#line 2536 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2480,7 +2555,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2507,7 +2582,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2511: checking for $ac_word" >&5 +echo "configure:2586: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2520,7 +2595,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2542,7 +2618,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2546: checking for $ac_word" >&5 +echo "configure:2622: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2574,7 +2650,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2578 "configure" +#line 2654 "configure" #include "confdefs.h" int main() { @@ -2582,7 +2658,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2614,7 +2690,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2618: checking for $ac_word" >&5 +echo "configure:2694: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2648,7 +2724,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2652: checking for $ac_word" >&5 +echo "configure:2728: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2661,7 +2737,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2683,7 +2760,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2687: checking for $ac_word" >&5 +echo "configure:2764: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2773,7 +2850,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2777: checking for catalogs to be installed" >&5 +echo "configure:2854: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2801,17 +2878,17 @@ echo "configure:2777: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2805: checking for linux/version.h" >&5 +echo "configure:2882: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2810 "configure" +#line 2887 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2880,17 +2957,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2884: checking for $ac_hdr" >&5 +echo "configure:2961: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2889 "configure" +#line 2966 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2920,17 +2997,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2924: checking for $ac_hdr" >&5 +echo "configure:3001: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2929 "configure" +#line 3006 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2934: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3011: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2960,17 +3037,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2964: checking for $ac_hdr" >&5 +echo "configure:3041: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2969 "configure" +#line 3046 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3000,17 +3077,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3004: checking for $ac_hdr" >&5 +echo "configure:3081: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3009 "configure" +#line 3086 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3091: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3039,12 +3116,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3043: checking for $ac_func" >&5 +echo "configure:3120: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3125 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3067,7 +3144,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3094,7 +3171,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3098: checking for bind in -lsocket" >&5 +echo "configure:3175: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3102,7 +3179,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3106 "configure" +#line 3183 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3113,7 +3190,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3141,7 +3218,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3145: checking for gethostbyname in -lnsl" >&5 +echo "configure:3222: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3149,7 +3226,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3153 "configure" +#line 3230 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3160,7 +3237,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3336,12 +3413,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3340: checking return type of signal handlers" >&5 +echo "configure:3417: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3345 "configure" +#line 3422 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3358,7 +3435,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3377,29 +3454,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3382: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3461: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3532,14 +3618,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3536: checking whether byte ordering is bigendian" >&5 +echo "configure:3622: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3543 "configure" +#line 3629 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3550,11 +3636,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3554: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3640: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3558 "configure" +#line 3644 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3565,7 +3651,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3569: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3655: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3585,7 +3671,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3589 "configure" +#line 3675 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3598,7 +3684,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3786,7 +3872,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3853,7 +3939,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3897,6 +3983,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3932,6 +4019,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/mcore/ChangeLog b/sim/mcore/ChangeLog index 1585c655683..486ad1ddaa1 100644 --- a/sim/mcore/ChangeLog +++ b/sim/mcore/ChangeLog @@ -1,3 +1,18 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + +1999-05-10 Nick Clifton <nickc@cygnus.com> + + * interp.c (sim_resume): Record PC in case it is needed for error + messages and the original has been corrupted. + +1999-05-07 Nick Clifton <nickc@cygnus.com> + + * interp.c (sim_resume): Fix typo 'oze' -> 'doze'. + (util): Handle 0x50FF stubs properly. + + 1999-04-29 Nick Clifton <nickc@cygnus.com> * interp.c (set_initial_gprs): Only display memory range if diff --git a/sim/mcore/configure b/sim/mcore/configure index e646fa8a499..0f8f463bab3 100755 --- a/sim/mcore/configure +++ b/sim/mcore/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/mcore/interp.c b/sim/mcore/interp.c index a5d188b255b..5807f5de4ec 100644 --- a/sim/mcore/interp.c +++ b/sim/mcore/interp.c @@ -40,8 +40,6 @@ static unsigned long heap_ptr = 0; host_callback * callback; -#define TARGET_BYTE_ORDER BIG_ENDIAN /* XXX */ - unsigned long mcore_extract_unsigned_integer (addr, len) unsigned char * addr; @@ -59,8 +57,11 @@ mcore_extract_unsigned_integer (addr, len) /* Start at the most significant end of the integer, and work towards the least significant. */ retval = 0; - for (p = startaddr; p < endaddr; ++p) - retval = (retval << 8) | * p; + + { + for (p = startaddr; p < endaddr;) + retval = (retval << 8) | * p ++; + } return retval; } @@ -74,24 +75,20 @@ mcore_store_unsigned_integer (addr, len, val) unsigned char * p; unsigned char * startaddr = (unsigned char *)addr; unsigned char * endaddr = startaddr + len; - - /* Start at the least significant end of the integer, and work towards - the most significant. */ - for (p = endaddr - 1; p >= startaddr; --p) + { - * p = val & 0xff; - val >>= 8; + for (p = endaddr; p > startaddr;) + { + * -- p = val & 0xff; + val >>= 8; + } } } /* The machine state. This state is maintained in host byte order. The fetch/store register functions must translate between host - byte order and the target processor byte order (for MCore this - is big-endian). Since we know that the MCore is always big-endian, - we cheat a bit and use the ntohl() and htonl() macros to - achieve this end. - + byte order and the target processor byte order. Keeping this data in target byte order simplifies the register read/write functions. Keeping this data in native order improves the performance of the simulator. Simulation speed is deemed more @@ -121,7 +118,7 @@ union word asints [1]; /* but accessed larger... */ } cpu; -#define LAST_VALID_CREG 12 /* only 0..12 implemented */ +#define LAST_VALID_CREG 12 /* only 0..12 implemented */ #define NUM_MCORE_REGS (16 + 16 + LAST_VALID_CREG) int memcycles = 1; @@ -149,12 +146,12 @@ static int issue_messages = 0; #define mem asregs.memory /* maniuplate the carry bit */ -#define C_ON() (cpu.sr & 1) +#define C_ON() (cpu.sr & 1) #define C_VALUE() (cpu.sr & 1) -#define C_OFF() ((cpu.sr & 1) == 0) -#define SET_C() {cpu.sr |= 1;} -#define CLR_C() {cpu.sr &= 0xfffffffe;} -#define NEW_C(v){CLR_C(); cpu.sr |= ((v) & 1);} +#define C_OFF() ((cpu.sr & 1) == 0) +#define SET_C() {cpu.sr |= 1;} +#define CLR_C() {cpu.sr &= 0xfffffffe;} +#define NEW_C(v) {CLR_C(); cpu.sr |= ((v) & 1);} #define SR_AF() ((cpu.sr >> 1) & 1) @@ -246,7 +243,8 @@ what (x, v) if ((x & 1) != 0) { if (issue_messages) - fprintf (stderr, "short write to unaligned memory address: 0x%x\n", x); + fprintf (stderr, "short write to unaligned memory address: 0x%x\n", + x); cpu.asregs.exception = SIGBUS; } @@ -376,7 +374,8 @@ sim_size (power) { if (issue_messages) fprintf (stderr, - "Not enough VM for simulation of %d bytes of RAM\n", cpu.asregs.msize); + "Not enough VM for simulation of %d bytes of RAM\n", + cpu.asregs.msize); cpu.asregs.msize = 1; cpu.mem = (unsigned char *) calloc (1, 1); @@ -481,7 +480,7 @@ handle_trap1 () { unsigned long a[3]; - switch ((unsigned long) (cpu.gr[TRAPCODE])) + switch ((unsigned long) (cpu.gr [TRAPCODE])) { case 3: a[0] = (unsigned long) (cpu.gr[PARM1]); @@ -587,7 +586,8 @@ handle_trap1 () default: if (issue_messages) - fprintf (stderr, "WARNING: sys call %d unimplemented\n", cpu.gr[TRAPCODE]); + fprintf (stderr, "WARNING: sys call %d unimplemented\n", + cpu.gr[TRAPCODE]); break; } } @@ -600,6 +600,7 @@ process_stub (what) switch (what) { case 3: /* _read */ + case 4: /* _write */ case 5: /* _open */ case 6: /* _close */ case 10: /* _unlink */ @@ -660,7 +661,7 @@ util (what) break; case 0xFF: - process_stub (what); + process_stub (cpu.gr[1]); break; default: @@ -733,7 +734,7 @@ sim_resume (sd, step, siggnal) cpu.asregs.exception = step ? SIGTRAP: 0; pc = cpu.asregs.pc; - /* fetch the initial instructions that we'll decode */ + /* Fetch the initial instructions that we'll decode. */ ibuf = rlat (pc & 0xFFFFFFFC); needfetch = 0; @@ -755,16 +756,18 @@ sim_resume (sd, step, siggnal) do { + word oldpc; + insts ++; if (pc & 02) { - inst = ibuf & 0xFFFF; + inst = ibuf & 0xFFFF; needfetch = 1; } else { - inst = ibuf >> 16; + inst = ibuf >> 16; } #ifdef WATCHFUNCTIONS @@ -798,7 +801,7 @@ sim_resume (sd, step, siggnal) WLendpc = 0; } - /* optimize with a hash to speed loop */ + /* Optimize with a hash to speed loop. */ if (WLincyc == 0) { if ((WLhash == 0) || ((WLhash & pc) != 0)) @@ -822,7 +825,9 @@ sim_resume (sd, step, siggnal) if (tracing) fprintf (stderr, "%.4x: inst = %.4x ", pc, inst); - + + oldpc = pc; + pc += 2; switch (inst >> 8) @@ -845,7 +850,7 @@ sim_resume (sd, step, siggnal) cpu.sr = cpu.esr; needfetch = 1; - if (SR_AF()) + if (SR_AF ()) cpu.asregs.active_gregs = & cpu.asregs.alt_gregs[0]; else cpu.asregs.active_gregs = & cpu.asregs.gregs[0]; @@ -874,7 +879,7 @@ sim_resume (sd, step, siggnal) case 0x6: /* doze */ if (issue_messages) - fprintf (stderr, "WARNING: oze unimplemented\n"); + fprintf (stderr, "WARNING: doze unimplemented\n"); break; case 0x7: @@ -1611,14 +1616,14 @@ sim_resume (sd, step, siggnal) if (tracing) fprintf (stderr, "\n"); - + if (needfetch) { /* Do not let him fetch from a bad address! */ if (((uword)pc) >= cpu.asregs.msize) { if (issue_messages) - fprintf (stderr, "PC outside of available memory! (%x)\n", pc); + fprintf (stderr, "PC loaded at 0x%x is outside of available memory! (0x%x)\n", oldpc, pc); cpu.asregs.exception = SIGSEGV; } @@ -1686,11 +1691,10 @@ sim_store_register (sd, rn, memory, length) { if (length == 4) { - /* ival is in 'target' order, which we know to be big-endian. - Let's convert it to natural order. */ long ival; - - ival = mcore_extract_unsigned_integer (memory, 4);/* misalignment safe */ + + /* misalignment safe */ + ival = mcore_extract_unsigned_integer (memory, 4); cpu.asints[rn] = ival; } @@ -1713,11 +1717,10 @@ sim_fetch_register (sd, rn, memory, length) { if (length == 4) { - /* caller expects 'target order', which is big-endian. Convert - * the native order we used [to speed up simulation] to the - * byte order expected by the caller. */ long ival = cpu.asints[rn]; - mcore_store_unsigned_integer (memory, 4, ival);/* misalignment-safe */ + + /* misalignment-safe */ + mcore_store_unsigned_integer (memory, 4, ival); } return 4; @@ -1778,27 +1781,36 @@ sim_info (sd, verbose) #endif double virttime = cpu.asregs.cycles / 36.0e6; - callback->printf_filtered (callback, "\n\n# instructions executed %10d\n", cpu.asregs.insts); - callback->printf_filtered (callback, "# cycles %10d\n", cpu.asregs.cycles); - callback->printf_filtered (callback, "# pipeline stalls %10d\n", cpu.asregs.stalls); - callback->printf_filtered (callback, "# virtual time taken %10.4f\n", virttime); + callback->printf_filtered (callback, "\n\n# instructions executed %10d\n", + cpu.asregs.insts); + callback->printf_filtered (callback, "# cycles %10d\n", + cpu.asregs.cycles); + callback->printf_filtered (callback, "# pipeline stalls %10d\n", + cpu.asregs.stalls); + callback->printf_filtered (callback, "# virtual time taken %10.4f\n", + virttime); #ifdef WATCHFUNCTIONS - callback->printf_filtered (callback, "\nNumber of watched functions: %d\n",ENDWL); + callback->printf_filtered (callback, "\nNumber of watched functions: %d\n", + ENDWL); wcyc = 0; for (w = 1; w <= ENDWL; w++) { callback->printf_filtered (callback, "WL = %s %8x\n",WLstr[w],WL[w]); - callback->printf_filtered (callback, " calls = %d, cycles = %d\n", WLcnts[w],WLcyc[w]); + callback->printf_filtered (callback, " calls = %d, cycles = %d\n", + WLcnts[w],WLcyc[w]); if (WLcnts[w] != 0) - callback->printf_filtered (callback, " maxcpc = %d, mincpc = %d, avecpc = %d\n",WLmax[w],WLmin[w],WLcyc[w]/WLcnts[w]); + callback->printf_filtered (callback, + " maxcpc = %d, mincpc = %d, avecpc = %d\n", + WLmax[w],WLmin[w],WLcyc[w]/WLcnts[w]); wcyc += WLcyc[w]; } - callback->printf_filtered (callback, "Total cycles for watched functions: %d\n",wcyc); + callback->printf_filtered (callback, + "Total cycles for watched functions: %d\n",wcyc); #endif } @@ -1886,7 +1898,7 @@ sim_load (sd, prog, abfd, from_tty) printf ("``%s'' is not appropriate object file.\n", prog); return SIM_RC_FAIL; } - + /* Look for that bss section. */ s_bss = bfd_get_section_by_name (handle, ".bss"); @@ -1919,6 +1931,7 @@ sim_load (sd, prog, abfd, from_tty) if (prog_bfd == NULL) return SIM_RC_FAIL; + if (abfd == NULL) bfd_close (prog_bfd); diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index 2efd41aa5bf..e996d62b14b 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-21 Frank Ch. Eigler <fche@cygnus.com> * mips.igen (bc0f): For the TX39 only, decode this as a no-op stub. diff --git a/sim/mips/configure b/sim/mips/configure index fe3e2d24b6c..b17aed47614 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -119,18 +119,6 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - - - @@ -206,6 +194,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -320,6 +309,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -490,6 +480,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -655,12 +650,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -701,7 +700,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:705: checking how to run the C preprocessor" >&5 +echo "configure:704: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -716,13 +715,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 720 "configure" +#line 719 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:725: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -733,13 +732,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 737 "configure" +#line 736 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:742: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -750,13 +749,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 754 "configure" +#line 753 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:760: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -781,7 +780,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:785: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:784: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -808,7 +807,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:812: checking for POSIXized ISC" >&5 +echo "configure:811: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -829,12 +828,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:833: checking for ANSI C header files" >&5 +echo "configure:832: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 838 "configure" +#line 837 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -842,7 +841,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -859,7 +858,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 863 "configure" +#line 862 "configure" #include "confdefs.h" #include <string.h> EOF @@ -877,7 +876,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 881 "configure" +#line 880 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -898,7 +897,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 902 "configure" +#line 901 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -909,7 +908,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -933,12 +932,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:937: checking for working const" >&5 +echo "configure:936: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 942 "configure" +#line 941 "configure" #include "confdefs.h" int main() { @@ -987,7 +986,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:991: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1008,21 +1007,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1012: checking for inline" >&5 +echo "configure:1011: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1019 "configure" +#line 1018 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1026: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1025: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1048,12 +1047,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1052: checking for off_t" >&5 +echo "configure:1051: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1057 "configure" +#line 1056 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1081,12 +1080,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1085: checking for size_t" >&5 +echo "configure:1084: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1090 "configure" +#line 1089 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1116,19 +1115,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1120: checking for working alloca.h" >&5 +echo "configure:1119: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1125 "configure" +#line 1124 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1149,12 +1148,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1153: checking for alloca" >&5 +echo "configure:1152: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1158 "configure" +#line 1157 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1182,7 +1181,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1214,12 +1213,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1218: checking whether alloca needs Cray hooks" >&5 +echo "configure:1217: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1223 "configure" +#line 1222 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1244,12 +1243,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1248: checking for $ac_func" >&5 +echo "configure:1247: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1253 "configure" +#line 1252 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1272,7 +1271,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1299,7 +1298,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1303: checking stack direction for C alloca" >&5 +echo "configure:1302: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1307,7 +1306,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1311 "configure" +#line 1310 "configure" #include "confdefs.h" find_stack_direction () { @@ -1326,7 +1325,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1351,17 +1350,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1355: checking for $ac_hdr" >&5 +echo "configure:1354: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1360 "configure" +#line 1359 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1365: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1364: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1390,12 +1389,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1394: checking for $ac_func" >&5 +echo "configure:1393: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1399 "configure" +#line 1398 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1418,7 +1417,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1443,7 +1442,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1447: checking for working mmap" >&5 +echo "configure:1446: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1451,7 +1450,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1455 "configure" +#line 1454 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1591,7 +1590,7 @@ main() } EOF -if { (eval echo configure:1595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1613,6 +1612,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1617: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1622 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1633: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1650: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1655 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1664,7 +1725,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1668: checking host system type" >&5 +echo "configure:1729: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1685,7 +1746,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1689: checking target system type" >&5 +echo "configure:1750: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1703,7 +1764,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1707: checking build system type" >&5 +echo "configure:1768: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1747,7 +1808,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1751: checking for $ac_word" >&5 +echo "configure:1812: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1777,7 +1838,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1781: checking for $ac_word" >&5 +echo "configure:1842: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1828,7 +1889,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1832: checking for $ac_word" >&5 +echo "configure:1893: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1860,7 +1921,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1864: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1925: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1871,12 +1932,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1875 "configure" +#line 1936 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1902,12 +1963,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1906: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1967: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1911: checking whether we are using GNU C" >&5 +echo "configure:1972: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1916,7 +1977,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1935,7 +1996,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1939: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2000: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1978,7 +2039,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1982: checking for a BSD compatible install" >&5 +echo "configure:2043: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2046,7 +2107,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2050: checking for $ac_word" >&5 +echo "configure:2111: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2081,17 +2142,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2085: checking for $ac_hdr" >&5 +echo "configure:2146: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2090 "configure" +#line 2151 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2121,12 +2182,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2125: checking for $ac_func" >&5 +echo "configure:2186: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2130 "configure" +#line 2191 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2149,7 +2210,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2178,12 +2239,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2182: checking for $ac_func" >&5 +echo "configure:2243: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2187 "configure" +#line 2248 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2206,7 +2267,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2240,19 +2301,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2244: checking for LC_MESSAGES" >&5 +echo "configure:2305: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2249 "configure" +#line 2310 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2256: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2273,7 +2334,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2277: checking whether NLS is requested" >&5 +echo "configure:2338: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2293,7 +2354,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2297: checking whether included gettext is requested" >&5 +echo "configure:2358: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2312,17 +2373,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2316: checking for libintl.h" >&5 +echo "configure:2377: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2321 "configure" +#line 2382 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2326: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2387: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2339,19 +2400,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2343: checking for gettext in libc" >&5 +echo "configure:2404: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2348 "configure" +#line 2409 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2367,7 +2428,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2371: checking for bindtextdomain in -lintl" >&5 +echo "configure:2432: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2375,7 +2436,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2379 "configure" +#line 2440 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2386,7 +2447,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2402,19 +2463,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2406: checking for gettext in libintl" >&5 +echo "configure:2467: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2411 "configure" +#line 2472 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2418: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2442,7 +2503,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2446: checking for $ac_word" >&5 +echo "configure:2507: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2476,12 +2537,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2480: checking for $ac_func" >&5 +echo "configure:2541: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2485 "configure" +#line 2546 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2504,7 +2565,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2531,7 +2592,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2535: checking for $ac_word" >&5 +echo "configure:2596: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2567,7 +2628,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2571: checking for $ac_word" >&5 +echo "configure:2632: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2599,7 +2660,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2603 "configure" +#line 2664 "configure" #include "confdefs.h" int main() { @@ -2607,7 +2668,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2639,7 +2700,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2643: checking for $ac_word" >&5 +echo "configure:2704: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2673,7 +2734,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2677: checking for $ac_word" >&5 +echo "configure:2738: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2709,7 +2770,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2713: checking for $ac_word" >&5 +echo "configure:2774: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2799,7 +2860,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2803: checking for catalogs to be installed" >&5 +echo "configure:2864: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2827,17 +2888,17 @@ echo "configure:2803: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2831: checking for linux/version.h" >&5 +echo "configure:2892: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2836 "configure" +#line 2897 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2841: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2906,17 +2967,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2910: checking for $ac_hdr" >&5 +echo "configure:2971: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2915 "configure" +#line 2976 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2946,17 +3007,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2950: checking for $ac_hdr" >&5 +echo "configure:3011: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2955 "configure" +#line 3016 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2960: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2986,17 +3047,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2990: checking for $ac_hdr" >&5 +echo "configure:3051: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2995 "configure" +#line 3056 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3061: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3026,17 +3087,17 @@ for ac_hdr in dlfcn.h errno.h sys/stat.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3030: checking for $ac_hdr" >&5 +echo "configure:3091: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3035 "configure" +#line 3096 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3040: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3101: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3065,12 +3126,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3069: checking for $ac_func" >&5 +echo "configure:3130: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3074 "configure" +#line 3135 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3093,7 +3154,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3120,7 +3181,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3124: checking for bind in -lsocket" >&5 +echo "configure:3185: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3128,7 +3189,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3132 "configure" +#line 3193 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3139,7 +3200,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3167,7 +3228,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3171: checking for gethostbyname in -lnsl" >&5 +echo "configure:3232: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3175,7 +3236,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3179 "configure" +#line 3240 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3186,7 +3247,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3362,12 +3423,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3366: checking return type of signal handlers" >&5 +echo "configure:3427: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3371 "configure" +#line 3432 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3384,7 +3445,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3403,29 +3464,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3408: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3471: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3557,14 +3627,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3561: checking whether byte ordering is bigendian" >&5 +echo "configure:3631: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3568 "configure" +#line 3638 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3575,11 +3645,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3579: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3649: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3583 "configure" +#line 3653 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3590,7 +3660,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3664: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3610,7 +3680,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3614 "configure" +#line 3684 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3623,7 +3693,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -4038,7 +4108,7 @@ esac # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:4142: checking for X" >&5 +echo "configure:4212: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -4100,12 +4170,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext <<EOF -#line 4204 "configure" +#line 4274 "configure" #include "confdefs.h" #include <$x_direct_test_include> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4209: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4279: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4174,14 +4244,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <<EOF -#line 4278 "configure" +#line 4348 "configure" #include "confdefs.h" int main() { ${x_direct_test_function}() ; return 0; } EOF -if { (eval echo configure:4285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -4274,17 +4344,17 @@ for ac_hdr in string.h strings.h stdlib.h stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:5172: checking for $ac_hdr" >&5 +echo "configure:5242: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5177 "configure" +#line 5247 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:5182: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:5252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4311,7 +4381,7 @@ fi done echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6 -echo "configure:5209: checking for fabs in -lm" >&5 +echo "configure:5279: checking for fabs in -lm" >&5 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4319,7 +4389,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <<EOF -#line 5217 "configure" +#line 5287 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -4330,7 +4400,7 @@ int main() { fabs() ; return 0; } EOF -if { (eval echo configure:5228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4360,12 +4430,12 @@ fi for ac_func in aint anint sqrt do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5258: checking for $ac_func" >&5 +echo "configure:5328: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 5263 "configure" +#line 5333 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4388,7 +4458,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:5286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else diff --git a/sim/mn10200/ChangeLog b/sim/mn10200/ChangeLog index 1eb7fbd7027..b29ecd58d90 100644 --- a/sim/mn10200/ChangeLog +++ b/sim/mn10200/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-06 Keith Seitz <keiths@cygnus.com> * interp.c (sim_stop): Set the sim's exception diff --git a/sim/mn10200/configure b/sim/mn10200/configure index e646fa8a499..0f8f463bab3 100755 --- a/sim/mn10200/configure +++ b/sim/mn10200/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog index 161acf252e1..5c95cc92a7f 100644 --- a/sim/mn10300/ChangeLog +++ b/sim/mn10300/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-16 Frank Ch. Eigler <fche@cygnus.com> * interp.c (program_interrupt): Detect undesired recursion using diff --git a/sim/mn10300/configure b/sim/mn10300/configure index 65327636edd..69772fa1f58 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -196,6 +186,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -310,6 +301,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -480,6 +472,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -501,7 +498,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -645,12 +642,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -691,7 +692,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:695: checking how to run the C preprocessor" >&5 +echo "configure:696: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -706,13 +707,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 710 "configure" +#line 711 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -723,13 +724,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 727 "configure" +#line 728 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -740,13 +741,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 744 "configure" +#line 745 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -771,7 +772,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:775: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:776: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -798,7 +799,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:802: checking for POSIXized ISC" >&5 +echo "configure:803: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -819,12 +820,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:823: checking for ANSI C header files" >&5 +echo "configure:824: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 828 "configure" +#line 829 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -832,7 +833,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -849,7 +850,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <string.h> EOF @@ -867,7 +868,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 871 "configure" +#line 872 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -888,7 +889,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 892 "configure" +#line 893 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -899,7 +900,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -923,12 +924,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:927: checking for working const" >&5 +echo "configure:928: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 932 "configure" +#line 933 "configure" #include "confdefs.h" int main() { @@ -977,7 +978,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -998,21 +999,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1002: checking for inline" >&5 +echo "configure:1003: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1009 "configure" +#line 1010 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1017: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1038,12 +1039,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1042: checking for off_t" >&5 +echo "configure:1043: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1047 "configure" +#line 1048 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1052,7 +1053,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1071,12 +1072,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1075: checking for size_t" >&5 +echo "configure:1076: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1080 "configure" +#line 1081 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1085,7 +1086,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1106,19 +1107,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1110: checking for working alloca.h" >&5 +echo "configure:1111: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1115 "configure" +#line 1116 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1139,12 +1140,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1143: checking for alloca" >&5 +echo "configure:1144: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1148 "configure" +#line 1149 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1172,7 +1173,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1204,12 +1205,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1208: checking whether alloca needs Cray hooks" >&5 +echo "configure:1209: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1213 "configure" +#line 1214 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1234,12 +1235,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1238: checking for $ac_func" >&5 +echo "configure:1239: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1243 "configure" +#line 1244 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1262,7 +1263,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1289,7 +1290,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1293: checking stack direction for C alloca" >&5 +echo "configure:1294: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1297,7 +1298,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1301 "configure" +#line 1302 "configure" #include "confdefs.h" find_stack_direction () { @@ -1316,7 +1317,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1341,17 +1342,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1345: checking for $ac_hdr" >&5 +echo "configure:1346: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1350 "configure" +#line 1351 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1355: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1356: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1380,12 +1381,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1384: checking for $ac_func" >&5 +echo "configure:1385: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1389 "configure" +#line 1390 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1408,7 +1409,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1433,7 +1434,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1437: checking for working mmap" >&5 +echo "configure:1438: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1441,7 +1442,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1445 "configure" +#line 1446 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1581,7 +1582,7 @@ main() } EOF -if { (eval echo configure:1585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1603,6 +1604,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1609: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1614 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1625: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1642: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1647 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1654,7 +1717,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1658: checking host system type" >&5 +echo "configure:1721: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1675,7 +1738,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1679: checking target system type" >&5 +echo "configure:1742: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1693,7 +1756,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1697: checking build system type" >&5 +echo "configure:1760: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1737,7 +1800,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1741: checking for $ac_word" >&5 +echo "configure:1804: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1745,7 +1808,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1766,7 +1830,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1770: checking for $ac_word" >&5 +echo "configure:1834: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1775,7 +1839,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1816,7 +1881,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1820: checking for $ac_word" >&5 +echo "configure:1885: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1824,7 +1889,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1847,7 +1913,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1851: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1917: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1856,12 +1922,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1861 "configure" +cat > conftest.$ac_ext << EOF + +#line 1928 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1875,18 +1943,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1885: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1959: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1890: checking whether we are using GNU C" >&5 +echo "configure:1964: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1895,7 +1969,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1899: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1914,7 +1988,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1918: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1992: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1957,7 +2031,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1961: checking for a BSD compatible install" >&5 +echo "configure:2035: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2005,6 +2079,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2023,7 +2099,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2027: checking for $ac_word" >&5 +echo "configure:2103: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2031,7 +2107,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2057,17 +2134,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2061: checking for $ac_hdr" >&5 +echo "configure:2138: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2066 "configure" +#line 2143 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2148: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2097,12 +2174,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2101: checking for $ac_func" >&5 +echo "configure:2178: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2106 "configure" +#line 2183 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2125,7 +2202,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2154,12 +2231,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2158: checking for $ac_func" >&5 +echo "configure:2235: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2163 "configure" +#line 2240 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2182,7 +2259,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2216,19 +2293,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2220: checking for LC_MESSAGES" >&5 +echo "configure:2297: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2225 "configure" +#line 2302 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2232: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2249,7 +2326,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2253: checking whether NLS is requested" >&5 +echo "configure:2330: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2269,7 +2346,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2273: checking whether included gettext is requested" >&5 +echo "configure:2350: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2288,17 +2365,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2292: checking for libintl.h" >&5 +echo "configure:2369: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2297 "configure" +#line 2374 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2379: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2315,19 +2392,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2319: checking for gettext in libc" >&5 +echo "configure:2396: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2324 "configure" +#line 2401 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2343,7 +2420,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2347: checking for bindtextdomain in -lintl" >&5 +echo "configure:2424: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2351,7 +2428,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2355 "configure" +#line 2432 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2362,7 +2439,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2378,19 +2455,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2382: checking for gettext in libintl" >&5 +echo "configure:2459: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2387 "configure" +#line 2464 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2418,7 +2495,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2422: checking for $ac_word" >&5 +echo "configure:2499: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2452,12 +2529,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2456: checking for $ac_func" >&5 +echo "configure:2533: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2461 "configure" +#line 2538 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2480,7 +2557,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2507,7 +2584,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2511: checking for $ac_word" >&5 +echo "configure:2588: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2520,7 +2597,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2542,7 +2620,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2546: checking for $ac_word" >&5 +echo "configure:2624: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2574,7 +2652,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2578 "configure" +#line 2656 "configure" #include "confdefs.h" int main() { @@ -2582,7 +2660,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2614,7 +2692,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2618: checking for $ac_word" >&5 +echo "configure:2696: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2648,7 +2726,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2652: checking for $ac_word" >&5 +echo "configure:2730: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2661,7 +2739,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2683,7 +2762,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2687: checking for $ac_word" >&5 +echo "configure:2766: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2773,7 +2852,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2777: checking for catalogs to be installed" >&5 +echo "configure:2856: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2801,17 +2880,17 @@ echo "configure:2777: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2805: checking for linux/version.h" >&5 +echo "configure:2884: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2810 "configure" +#line 2889 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2880,17 +2959,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2884: checking for $ac_hdr" >&5 +echo "configure:2963: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2889 "configure" +#line 2968 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2920,17 +2999,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2924: checking for $ac_hdr" >&5 +echo "configure:3003: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2929 "configure" +#line 3008 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2934: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2960,17 +3039,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2964: checking for $ac_hdr" >&5 +echo "configure:3043: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3048 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3083: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2969 "configure" +#line 3088 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3093: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2999,12 +3118,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3003: checking for $ac_func" >&5 +echo "configure:3122: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3008 "configure" +#line 3127 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3027,7 +3146,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3054,7 +3173,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3058: checking for bind in -lsocket" >&5 +echo "configure:3177: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3062,7 +3181,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3066 "configure" +#line 3185 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3073,7 +3192,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3101,7 +3220,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3105: checking for gethostbyname in -lnsl" >&5 +echo "configure:3224: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3109,7 +3228,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3113 "configure" +#line 3232 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3120,7 +3239,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3296,12 +3415,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3300: checking return type of signal handlers" >&5 +echo "configure:3419: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3305 "configure" +#line 3424 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3318,7 +3437,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3441: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3337,29 +3456,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3342: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3463: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3492,14 +3620,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3496: checking whether byte ordering is bigendian" >&5 +echo "configure:3624: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3503 "configure" +#line 3631 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3510,11 +3638,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3518 "configure" +#line 3646 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3525,7 +3653,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3529: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3545,7 +3673,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3549 "configure" +#line 3677 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3558,7 +3686,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3795,12 +3923,12 @@ fi for ac_func in time chmod utime fork execve execv chown do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3801: checking for $ac_func" >&5 +echo "configure:3927: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3806 "configure" +#line 3932 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3823,7 +3951,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3851,17 +3979,17 @@ for ac_hdr in unistd.h stdlib.h string.h strings.h utime.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3857: checking for $ac_hdr" >&5 +echo "configure:3983: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3862 "configure" +#line 3988 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3867: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3933,7 +4061,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -4000,7 +4128,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -4044,6 +4172,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -4079,6 +4208,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog index 93312f0d3a0..22550099229 100644 --- a/sim/ppc/ChangeLog +++ b/sim/ppc/ChangeLog @@ -1,3 +1,8 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure.in: Use AC_EXEEXT instead of AM_EXEEXT. + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-02 Keith Seitz <keiths@cygnus.com> * sim_calls.c (POLL_QUIT_INTERVAL): Define. Used to tweak diff --git a/sim/ppc/configure b/sim/ppc/configure index 440662af86e..3eec431e473 100755 --- a/sim/ppc/configure +++ b/sim/ppc/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -234,6 +224,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -348,6 +339,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -518,6 +510,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -539,7 +536,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -683,12 +680,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -759,7 +760,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:763: checking for a BSD compatible install" >&5 +echo "configure:764: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -807,12 +808,14 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:816: checking for $ac_word" >&5 +echo "configure:819: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -820,7 +823,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -841,7 +845,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:845: checking for $ac_word" >&5 +echo "configure:849: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -850,7 +854,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -891,7 +896,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:895: checking for $ac_word" >&5 +echo "configure:900: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -899,7 +904,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -922,7 +928,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:926: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:932: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -931,12 +937,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 936 "configure" +cat > conftest.$ac_ext << EOF + +#line 943 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -950,18 +958,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:960: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:965: checking whether we are using GNU C" >&5 +echo "configure:979: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -970,7 +984,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:974: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -989,7 +1003,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:993: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1007: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1030,7 +1044,7 @@ fi ALL_LINGUAS= echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1034: checking how to run the C preprocessor" >&5 +echo "configure:1048: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1045,13 +1059,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1049 "configure" +#line 1063 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1062,13 +1076,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1066 "configure" +#line 1080 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1072: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1086: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1079,13 +1093,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 1083 "configure" +#line 1097 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1110,7 +1124,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1114: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1128: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1139,7 +1153,7 @@ fi # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1143: checking for $ac_word" >&5 +echo "configure:1157: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1147,7 +1161,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -1166,7 +1181,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:1170: checking for POSIXized ISC" >&5 +echo "configure:1185: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -1187,12 +1202,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1191: checking for ANSI C header files" >&5 +echo "configure:1206: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1196 "configure" +#line 1211 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -1200,7 +1215,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1204: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1219: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1217,7 +1232,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1221 "configure" +#line 1236 "configure" #include "confdefs.h" #include <string.h> EOF @@ -1235,7 +1250,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1239 "configure" +#line 1254 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -1256,7 +1271,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 1260 "configure" +#line 1275 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1267,7 +1282,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1271: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1291,12 +1306,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1295: checking for working const" >&5 +echo "configure:1310: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1300 "configure" +#line 1315 "configure" #include "confdefs.h" int main() { @@ -1345,7 +1360,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:1349: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1364: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1366,21 +1381,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1370: checking for inline" >&5 +echo "configure:1385: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1377 "configure" +#line 1392 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1399: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1406,12 +1421,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1410: checking for off_t" >&5 +echo "configure:1425: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1415 "configure" +#line 1430 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1420,7 +1435,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1439,12 +1454,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1443: checking for size_t" >&5 +echo "configure:1458: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1448 "configure" +#line 1463 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1453,7 +1468,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1474,19 +1489,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1478: checking for working alloca.h" >&5 +echo "configure:1493: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1483 "configure" +#line 1498 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1507,12 +1522,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1511: checking for alloca" >&5 +echo "configure:1526: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1516 "configure" +#line 1531 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1540,7 +1555,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1572,12 +1587,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1576: checking whether alloca needs Cray hooks" >&5 +echo "configure:1591: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1581 "configure" +#line 1596 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1602,12 +1617,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1606: checking for $ac_func" >&5 +echo "configure:1621: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1611 "configure" +#line 1626 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1630,7 +1645,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1657,7 +1672,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1661: checking stack direction for C alloca" >&5 +echo "configure:1676: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1665,7 +1680,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1669 "configure" +#line 1684 "configure" #include "confdefs.h" find_stack_direction () { @@ -1684,7 +1699,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1709,17 +1724,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1713: checking for $ac_hdr" >&5 +echo "configure:1728: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1718 "configure" +#line 1733 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1738: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1748,12 +1763,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_func" >&5 +echo "configure:1767: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1757 "configure" +#line 1772 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1776,7 +1791,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1801,7 +1816,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1805: checking for working mmap" >&5 +echo "configure:1820: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1809,7 +1824,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1813 "configure" +#line 1828 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1949,7 +1964,7 @@ main() } EOF -if { (eval echo configure:1953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1977,17 +1992,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1981: checking for $ac_hdr" >&5 +echo "configure:1996: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1986 "configure" +#line 2001 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1991: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2006: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2017,12 +2032,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2021: checking for $ac_func" >&5 +echo "configure:2036: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2026 "configure" +#line 2041 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2045,7 +2060,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2074,12 +2089,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2078: checking for $ac_func" >&5 +echo "configure:2093: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2083 "configure" +#line 2098 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2102,7 +2117,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,19 +2151,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2140: checking for LC_MESSAGES" >&5 +echo "configure:2155: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2160 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2152: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2169,7 +2184,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2173: checking whether NLS is requested" >&5 +echo "configure:2188: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2189,7 +2204,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2193: checking whether included gettext is requested" >&5 +echo "configure:2208: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2208,17 +2223,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2212: checking for libintl.h" >&5 +echo "configure:2227: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2217 "configure" +#line 2232 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2222: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2237: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2235,19 +2250,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2239: checking for gettext in libc" >&5 +echo "configure:2254: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2244 "configure" +#line 2259 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2263,7 +2278,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2267: checking for bindtextdomain in -lintl" >&5 +echo "configure:2282: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2271,7 +2286,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2275 "configure" +#line 2290 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2282,7 +2297,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2298,19 +2313,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2302: checking for gettext in libintl" >&5 +echo "configure:2317: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2307 "configure" +#line 2322 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2338,7 +2353,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2342: checking for $ac_word" >&5 +echo "configure:2357: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2372,12 +2387,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2376: checking for $ac_func" >&5 +echo "configure:2391: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2381 "configure" +#line 2396 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2400,7 +2415,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2427,7 +2442,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2431: checking for $ac_word" >&5 +echo "configure:2446: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2440,7 +2455,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2462,7 +2478,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2466: checking for $ac_word" >&5 +echo "configure:2482: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2494,7 +2510,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2498 "configure" +#line 2514 "configure" #include "confdefs.h" int main() { @@ -2502,7 +2518,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2522: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2534,7 +2550,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2538: checking for $ac_word" >&5 +echo "configure:2554: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2568,7 +2584,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2572: checking for $ac_word" >&5 +echo "configure:2588: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2581,7 +2597,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2603,7 +2620,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2607: checking for $ac_word" >&5 +echo "configure:2624: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2693,7 +2710,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2697: checking for catalogs to be installed" >&5 +echo "configure:2714: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2721,17 +2738,17 @@ echo "configure:2697: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2725: checking for linux/version.h" >&5 +echo "configure:2742: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2730 "configure" +#line 2747 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3085,14 +3102,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3089: checking whether byte ordering is bigendian" >&5 +echo "configure:3106: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3096 "configure" +#line 3113 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3103,11 +3120,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3124: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3111 "configure" +#line 3128 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3118,7 +3135,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3122: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3139: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3138,7 +3155,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3142 "configure" +#line 3159 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3151,7 +3168,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3605,7 +3622,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:3609: checking host system type" >&5 +echo "configure:3626: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -3626,7 +3643,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:3630: checking target system type" >&5 +echo "configure:3647: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -3644,7 +3661,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:3648: checking build system type" >&5 +echo "configure:3665: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -3691,12 +3708,12 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 -echo "configure:3695: checking for st_blksize in struct stat" >&5 +echo "configure:3712: checking for st_blksize in struct stat" >&5 if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3700 "configure" +#line 3717 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/stat.h> @@ -3704,7 +3721,7 @@ int main() { struct stat s; s.st_blksize; ; return 0; } EOF -if { (eval echo configure:3708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3725: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_blksize=yes else @@ -3725,12 +3742,12 @@ EOF fi echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6 -echo "configure:3729: checking for st_blocks in struct stat" >&5 +echo "configure:3746: checking for st_blocks in struct stat" >&5 if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3734 "configure" +#line 3751 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/stat.h> @@ -3738,7 +3755,7 @@ int main() { struct stat s; s.st_blocks; ; return 0; } EOF -if { (eval echo configure:3742: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_blocks=yes else @@ -3761,12 +3778,12 @@ else fi echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6 -echo "configure:3765: checking for st_rdev in struct stat" >&5 +echo "configure:3782: checking for st_rdev in struct stat" >&5 if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3770 "configure" +#line 3787 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/stat.h> @@ -3774,7 +3791,7 @@ int main() { struct stat s; s.st_rdev; ; return 0; } EOF -if { (eval echo configure:3778: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3795: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_rdev=yes else @@ -3795,12 +3812,12 @@ EOF fi echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -echo "configure:3799: checking whether struct tm is in sys/time.h or time.h" >&5 +echo "configure:3816: checking whether struct tm is in sys/time.h or time.h" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3804 "configure" +#line 3821 "configure" #include "confdefs.h" #include <sys/types.h> #include <time.h> @@ -3808,7 +3825,7 @@ int main() { struct tm *tp; tp->tm_sec; ; return 0; } EOF -if { (eval echo configure:3812: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3829: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm=time.h else @@ -3829,12 +3846,12 @@ EOF fi echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 -echo "configure:3833: checking for tm_zone in struct tm" >&5 +echo "configure:3850: checking for tm_zone in struct tm" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3838 "configure" +#line 3855 "configure" #include "confdefs.h" #include <sys/types.h> #include <$ac_cv_struct_tm> @@ -3842,7 +3859,7 @@ int main() { struct tm tm; tm.tm_zone; ; return 0; } EOF -if { (eval echo configure:3846: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm_zone=yes else @@ -3862,12 +3879,12 @@ EOF else echo $ac_n "checking for tzname""... $ac_c" 1>&6 -echo "configure:3866: checking for tzname" >&5 +echo "configure:3883: checking for tzname" >&5 if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3871 "configure" +#line 3888 "configure" #include "confdefs.h" #include <time.h> #ifndef tzname /* For SGI. */ @@ -3877,7 +3894,7 @@ int main() { atoi(*tzname); ; return 0; } EOF -if { (eval echo configure:3881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_var_tzname=yes else @@ -3900,12 +3917,12 @@ fi echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:3904: checking for uid_t in sys/types.h" >&5 +echo "configure:3921: checking for uid_t in sys/types.h" >&5 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3909 "configure" +#line 3926 "configure" #include "confdefs.h" #include <sys/types.h> EOF @@ -3934,7 +3951,7 @@ EOF fi echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6 -echo "configure:3938: checking type of array argument to getgroups" >&5 +echo "configure:3955: checking type of array argument to getgroups" >&5 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3942,7 +3959,7 @@ else ac_cv_type_getgroups=cross else cat > conftest.$ac_ext <<EOF -#line 3946 "configure" +#line 3963 "configure" #include "confdefs.h" /* Thanks to Mike Rendell for this test. */ @@ -3967,7 +3984,7 @@ main() } EOF -if { (eval echo configure:3971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_type_getgroups=gid_t else @@ -3981,7 +3998,7 @@ fi if test $ac_cv_type_getgroups = cross; then cat > conftest.$ac_ext <<EOF -#line 3985 "configure" +#line 4002 "configure" #include "confdefs.h" #include <unistd.h> EOF @@ -4005,12 +4022,12 @@ EOF echo $ac_n "checking for mode_t""... $ac_c" 1>&6 -echo "configure:4009: checking for mode_t" >&5 +echo "configure:4026: checking for mode_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4014 "configure" +#line 4031 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -4019,7 +4036,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_mode_t=yes else @@ -4038,12 +4055,12 @@ EOF fi echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:4042: checking for off_t" >&5 +echo "configure:4059: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4047 "configure" +#line 4064 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -4052,7 +4069,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -4071,12 +4088,12 @@ EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:4075: checking for pid_t" >&5 +echo "configure:4092: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4080 "configure" +#line 4097 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -4085,7 +4102,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_pid_t=yes else @@ -4104,12 +4121,12 @@ EOF fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:4108: checking return type of signal handlers" >&5 +echo "configure:4125: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4113 "configure" +#line 4130 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -4126,7 +4143,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:4130: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -4145,12 +4162,12 @@ EOF echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:4149: checking for size_t" >&5 +echo "configure:4166: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4154 "configure" +#line 4171 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -4159,7 +4176,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -4178,12 +4195,12 @@ EOF fi echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:4182: checking for uid_t in sys/types.h" >&5 +echo "configure:4199: checking for uid_t in sys/types.h" >&5 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4187 "configure" +#line 4204 "configure" #include "confdefs.h" #include <sys/types.h> EOF @@ -4215,12 +4232,12 @@ fi for ac_func in access cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4219: checking for $ac_func" >&5 +echo "configure:4236: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4224 "configure" +#line 4241 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -4243,7 +4260,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:4247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4272,17 +4289,17 @@ for ac_hdr in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/param.h sys/re do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4276: checking for $ac_hdr" >&5 +echo "configure:4293: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4281 "configure" +#line 4298 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4313,12 +4330,12 @@ for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 -echo "configure:4317: checking for $ac_hdr that defines DIR" >&5 +echo "configure:4334: checking for $ac_hdr that defines DIR" >&5 if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4322 "configure" +#line 4339 "configure" #include "confdefs.h" #include <sys/types.h> #include <$ac_hdr> @@ -4326,7 +4343,7 @@ int main() { DIR *dirp = 0; ; return 0; } EOF -if { (eval echo configure:4330: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4347: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* eval "ac_cv_header_dirent_$ac_safe=yes" else @@ -4351,7 +4368,7 @@ done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 -echo "configure:4355: checking for opendir in -ldir" >&5 +echo "configure:4372: checking for opendir in -ldir" >&5 ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4359,7 +4376,7 @@ else ac_save_LIBS="$LIBS" LIBS="-ldir $LIBS" cat > conftest.$ac_ext <<EOF -#line 4363 "configure" +#line 4380 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -4370,7 +4387,7 @@ int main() { opendir() ; return 0; } EOF -if { (eval echo configure:4374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4392,7 +4409,7 @@ fi else echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 -echo "configure:4396: checking for opendir in -lx" >&5 +echo "configure:4413: checking for opendir in -lx" >&5 ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4400,7 +4417,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lx $LIBS" cat > conftest.$ac_ext <<EOF -#line 4404 "configure" +#line 4421 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -4411,7 +4428,7 @@ int main() { opendir() ; return 0; } EOF -if { (eval echo configure:4415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4436,12 +4453,12 @@ fi sim_termio="" echo $ac_n "checking for struct termios""... $ac_c" 1>&6 -echo "configure:4440: checking for struct termios" >&5 +echo "configure:4457: checking for struct termios" >&5 if eval "test \"`echo '$''{'ac_cv_termios_struct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4445 "configure" +#line 4462 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/termios.h> @@ -4454,7 +4471,7 @@ static struct termios x; x.c_cc[NCCS] = 0; ; return 0; } EOF -if { (eval echo configure:4458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4475: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termios_struct=yes else @@ -4473,12 +4490,12 @@ fi if test "$ac_cv_termios_struct" = "yes"; then echo $ac_n "checking for c_line field in struct termios""... $ac_c" 1>&6 -echo "configure:4477: checking for c_line field in struct termios" >&5 +echo "configure:4494: checking for c_line field in struct termios" >&5 if eval "test \"`echo '$''{'ac_cv_termios_cline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4482 "configure" +#line 4499 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/termios.h> @@ -4486,7 +4503,7 @@ int main() { static struct termios x; x.c_line = 0; ; return 0; } EOF -if { (eval echo configure:4490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4507: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termios_cline=yes else @@ -4509,12 +4526,12 @@ fi if test "$ac_cv_termios_struct" != "yes"; then echo $ac_n "checking for struct termio""... $ac_c" 1>&6 -echo "configure:4513: checking for struct termio" >&5 +echo "configure:4530: checking for struct termio" >&5 if eval "test \"`echo '$''{'ac_cv_termio_struct'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4518 "configure" +#line 4535 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/termio.h> @@ -4527,7 +4544,7 @@ static struct termio x; x.c_cc[NCC] = 0; ; return 0; } EOF -if { (eval echo configure:4531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termio_struct=yes else @@ -4549,12 +4566,12 @@ fi if test "$ac_cv_termio_struct" = "yes"; then echo $ac_n "checking for c_line field in struct termio""... $ac_c" 1>&6 -echo "configure:4553: checking for c_line field in struct termio" >&5 +echo "configure:4570: checking for c_line field in struct termio" >&5 if eval "test \"`echo '$''{'ac_cv_termio_cline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 4558 "configure" +#line 4575 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/termio.h> @@ -4562,7 +4579,7 @@ int main() { static struct termio x; x.c_line = 0; ; return 0; } EOF -if { (eval echo configure:4566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4583: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_termio_cline=yes else @@ -4585,7 +4602,7 @@ fi sim_devzero="" echo $ac_n "checking for /dev/zero""... $ac_c" 1>&6 -echo "configure:4589: checking for /dev/zero" >&5 +echo "configure:4606: checking for /dev/zero" >&5 if eval "test \"`echo '$''{'ac_cv_devzero'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4593,7 +4610,7 @@ else ac_cv_devzero=no else cat > conftest.$ac_ext <<EOF -#line 4597 "configure" +#line 4614 "configure" #include "confdefs.h" #include <fcntl.h> main () { @@ -4612,7 +4629,7 @@ main () { return 0; } EOF -if { (eval echo configure:4616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_devzero=yes else @@ -4634,7 +4651,7 @@ else fi echo $ac_n "checking for common simulator directory""... $ac_c" 1>&6 -echo "configure:4638: checking for common simulator directory" >&5 +echo "configure:4655: checking for common simulator directory" >&5 if test -f "${srcdir}/../common/callback.c"; then echo "$ac_t""yes" 1>&6 sim_callback="callback.o targ-map.o" @@ -4645,29 +4662,100 @@ else sim_targ_vals="" fi -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4650: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:4667: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe + cat > conftest.$ac_ext <<EOF +#line 4672 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:4683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes else -cat > am_c_test.c << 'EOF' + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:4700: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 4705 "configure" +#include "confdefs.h" + int main() { -/* Nothing needed here */ -} +return __MINGW32__; +; return 0; } EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* +if { (eval echo configure:4712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes -test x"${am_cv_exeext}" = x && am_cv_exeext=no + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:4731: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:4741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT @@ -4678,7 +4766,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4682: checking for $ac_word" >&5 +echo "configure:4770: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4686,7 +4774,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -4770,7 +4859,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -4837,7 +4926,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -4881,6 +4970,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -4900,6 +4990,7 @@ s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC@%$CC%g s%@SET_MAKE@%$SET_MAKE%g diff --git a/sim/ppc/configure.in b/sim/ppc/configure.in index 8e530b6f5f1..728f136e966 100644 --- a/sim/ppc/configure.in +++ b/sim/ppc/configure.in @@ -690,7 +690,7 @@ else fi dnl Check for exe extension -AM_EXEEXT +AC_EXEEXT AC_SUBST(CC_FOR_BUILD) AC_SUBST(CFLAGS) diff --git a/sim/sh/ChangeLog b/sim/sh/ChangeLog index 61de57b73f5..9c0f842ae5b 100644 --- a/sim/sh/ChangeLog +++ b/sim/sh/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + 1999-04-02 Keith Seitz <keiths@cygnus.com> * interp.c (POLL_QUIT_INTERVAL): Define. Used to tweak the diff --git a/sim/sh/configure b/sim/sh/configure index e646fa8a499..0f8f463bab3 100755 --- a/sim/sh/configure +++ b/sim/sh/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/v850/ChangeLog b/sim/v850/ChangeLog index ee0df4f712d..3daba58916e 100644 --- a/sim/v850/ChangeLog +++ b/sim/v850/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Tue Dec 1 17:25:16 1998 Andrew Cagney <cagney@b1.cygnus.com> * Makefile.in (NL_TARGET): Define as -DNL_TARGET_v850. diff --git a/sim/v850/configure b/sim/v850/configure index 06efdb26186..99e42942b58 100755 --- a/sim/v850/configure +++ b/sim/v850/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -190,6 +180,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -304,6 +295,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -474,6 +466,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -495,7 +492,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -639,12 +636,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -685,7 +686,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:689: checking how to run the C preprocessor" >&5 +echo "configure:690: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -700,13 +701,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 704 "configure" +#line 705 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -717,13 +718,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 721 "configure" +#line 722 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:727: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -734,13 +735,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 738 "configure" +#line 739 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:744: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:745: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -765,7 +766,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:769: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:770: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -792,7 +793,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:796: checking for POSIXized ISC" >&5 +echo "configure:797: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -813,12 +814,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:817: checking for ANSI C header files" >&5 +echo "configure:818: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 822 "configure" +#line 823 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -826,7 +827,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -843,7 +844,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 847 "configure" +#line 848 "configure" #include "confdefs.h" #include <string.h> EOF @@ -861,7 +862,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 865 "configure" +#line 866 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -882,7 +883,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 886 "configure" +#line 887 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -893,7 +894,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:897: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -917,12 +918,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:921: checking for working const" >&5 +echo "configure:922: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 926 "configure" +#line 927 "configure" #include "confdefs.h" int main() { @@ -971,7 +972,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:975: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:976: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -992,21 +993,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:996: checking for inline" >&5 +echo "configure:997: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1003 "configure" +#line 1004 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1010: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1011: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1032,12 +1033,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1036: checking for off_t" >&5 +echo "configure:1037: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1041 "configure" +#line 1042 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1046,7 +1047,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1065,12 +1066,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1069: checking for size_t" >&5 +echo "configure:1070: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1074 "configure" +#line 1075 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1079,7 +1080,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1100,19 +1101,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1104: checking for working alloca.h" >&5 +echo "configure:1105: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1109 "configure" +#line 1110 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1133,12 +1134,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1137: checking for alloca" >&5 +echo "configure:1138: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1142 "configure" +#line 1143 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1166,7 +1167,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1198,12 +1199,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1202: checking whether alloca needs Cray hooks" >&5 +echo "configure:1203: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1207 "configure" +#line 1208 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1228,12 +1229,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1232: checking for $ac_func" >&5 +echo "configure:1233: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1237 "configure" +#line 1238 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1256,7 +1257,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1283,7 +1284,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1287: checking stack direction for C alloca" >&5 +echo "configure:1288: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1291,7 +1292,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1295 "configure" +#line 1296 "configure" #include "confdefs.h" find_stack_direction () { @@ -1310,7 +1311,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1335,17 +1336,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1339: checking for $ac_hdr" >&5 +echo "configure:1340: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1344 "configure" +#line 1345 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1349: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1374,12 +1375,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1378: checking for $ac_func" >&5 +echo "configure:1379: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1383 "configure" +#line 1384 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1402,7 +1403,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1427,7 +1428,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1431: checking for working mmap" >&5 +echo "configure:1432: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1435,7 +1436,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1439 "configure" +#line 1440 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1575,7 +1576,7 @@ main() } EOF -if { (eval echo configure:1579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1597,6 +1598,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1603: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1608 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1636: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1641 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1648: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1648,7 +1711,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1652: checking host system type" >&5 +echo "configure:1715: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1669,7 +1732,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1673: checking target system type" >&5 +echo "configure:1736: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1687,7 +1750,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1691: checking build system type" >&5 +echo "configure:1754: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1731,7 +1794,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1735: checking for $ac_word" >&5 +echo "configure:1798: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1739,7 +1802,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1760,7 +1824,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1764: checking for $ac_word" >&5 +echo "configure:1828: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1769,7 +1833,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1810,7 +1875,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1814: checking for $ac_word" >&5 +echo "configure:1879: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1818,7 +1883,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1841,7 +1907,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1845: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1911: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1850,12 +1916,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1855 "configure" +cat > conftest.$ac_ext << EOF + +#line 1922 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1859: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1869,18 +1937,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1879: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1953: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1884: checking whether we are using GNU C" >&5 +echo "configure:1958: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1889,7 +1963,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1893: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1908,7 +1982,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1912: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1986: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1951,7 +2025,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1955: checking for a BSD compatible install" >&5 +echo "configure:2029: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1999,6 +2073,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2017,7 +2093,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2021: checking for $ac_word" >&5 +echo "configure:2097: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2025,7 +2101,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2051,17 +2128,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2055: checking for $ac_hdr" >&5 +echo "configure:2132: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2060 "configure" +#line 2137 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2065: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2142: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2091,12 +2168,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2095: checking for $ac_func" >&5 +echo "configure:2172: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2100 "configure" +#line 2177 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2119,7 +2196,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2148,12 +2225,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2152: checking for $ac_func" >&5 +echo "configure:2229: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2157 "configure" +#line 2234 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2176,7 +2253,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2210,19 +2287,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2214: checking for LC_MESSAGES" >&5 +echo "configure:2291: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2219 "configure" +#line 2296 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2243,7 +2320,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2247: checking whether NLS is requested" >&5 +echo "configure:2324: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2263,7 +2340,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2267: checking whether included gettext is requested" >&5 +echo "configure:2344: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2282,17 +2359,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2286: checking for libintl.h" >&5 +echo "configure:2363: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2291 "configure" +#line 2368 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2309,19 +2386,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2313: checking for gettext in libc" >&5 +echo "configure:2390: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2318 "configure" +#line 2395 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2337,7 +2414,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2341: checking for bindtextdomain in -lintl" >&5 +echo "configure:2418: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2345,7 +2422,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2349 "configure" +#line 2426 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2356,7 +2433,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2372,19 +2449,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2376: checking for gettext in libintl" >&5 +echo "configure:2453: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2381 "configure" +#line 2458 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2412,7 +2489,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2416: checking for $ac_word" >&5 +echo "configure:2493: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2446,12 +2523,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2450: checking for $ac_func" >&5 +echo "configure:2527: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2455 "configure" +#line 2532 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2474,7 +2551,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2501,7 +2578,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2505: checking for $ac_word" >&5 +echo "configure:2582: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2514,7 +2591,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2536,7 +2614,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2540: checking for $ac_word" >&5 +echo "configure:2618: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2568,7 +2646,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2572 "configure" +#line 2650 "configure" #include "confdefs.h" int main() { @@ -2576,7 +2654,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2608,7 +2686,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2612: checking for $ac_word" >&5 +echo "configure:2690: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2642,7 +2720,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2646: checking for $ac_word" >&5 +echo "configure:2724: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2655,7 +2733,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2677,7 +2756,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2681: checking for $ac_word" >&5 +echo "configure:2760: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2767,7 +2846,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2771: checking for catalogs to be installed" >&5 +echo "configure:2850: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2795,17 +2874,17 @@ echo "configure:2771: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2799: checking for linux/version.h" >&5 +echo "configure:2878: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2804 "configure" +#line 2883 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2809: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2874,17 +2953,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2878: checking for $ac_hdr" >&5 +echo "configure:2957: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2883 "configure" +#line 2962 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2914,17 +2993,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2918: checking for $ac_hdr" >&5 +echo "configure:2997: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2923 "configure" +#line 3002 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2954,17 +3033,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2958: checking for $ac_hdr" >&5 +echo "configure:3037: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3042 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3077: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2963 "configure" +#line 3082 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2968: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2993,12 +3112,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2997: checking for $ac_func" >&5 +echo "configure:3116: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3002 "configure" +#line 3121 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3021,7 +3140,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3144: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3048,7 +3167,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3052: checking for bind in -lsocket" >&5 +echo "configure:3171: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3056,7 +3175,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3060 "configure" +#line 3179 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3067,7 +3186,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3095,7 +3214,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3099: checking for gethostbyname in -lnsl" >&5 +echo "configure:3218: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3103,7 +3222,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3107 "configure" +#line 3226 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3114,7 +3233,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3290,12 +3409,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3294: checking return type of signal handlers" >&5 +echo "configure:3413: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3299 "configure" +#line 3418 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3312,7 +3431,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3316: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3435: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3331,29 +3450,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3336: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3457: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3486,14 +3614,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3490: checking whether byte ordering is bigendian" >&5 +echo "configure:3618: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext <<EOF -#line 3497 "configure" +#line 3625 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3504,11 +3632,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3508: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext <<EOF -#line 3512 "configure" +#line 3640 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/param.h> @@ -3519,7 +3647,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3523: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3651: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3539,7 +3667,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <<EOF -#line 3543 "configure" +#line 3671 "configure" #include "confdefs.h" main () { /* Are we little or big endian? From Harbison&Steele. */ @@ -3552,7 +3680,7 @@ main () { exit (u.c[sizeof (long) - 1] == 1); } EOF -if { (eval echo configure:3556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3687,12 +3815,12 @@ fi for ac_func in time chmod utime fork execve execv chown do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3691: checking for $ac_func" >&5 +echo "configure:3819: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3696 "configure" +#line 3824 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3715,7 +3843,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3743,17 +3871,17 @@ for ac_hdr in unistd.h stdlib.h string.h strings.h utime.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3747: checking for $ac_hdr" >&5 +echo "configure:3875: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3752 "configure" +#line 3880 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3757: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3805,7 +3933,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3872,7 +4000,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3916,6 +4044,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3951,6 +4080,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g diff --git a/sim/w65/ChangeLog b/sim/w65/ChangeLog index f72df1baedb..e4083287903 100644 --- a/sim/w65/ChangeLog +++ b/sim/w65/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> * configure: Regenerated to track ../common/aclocal.m4 changes. diff --git a/sim/w65/configure b/sim/w65/configure index 0ddd01d87a8..1d8601e8cb5 100755 --- a/sim/w65/configure +++ b/sim/w65/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -164,6 +154,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -278,6 +269,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -448,6 +440,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -469,7 +466,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -613,12 +610,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -707,7 +708,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:711: checking host system type" >&5 +echo "configure:712: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -728,7 +729,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:732: checking target system type" >&5 +echo "configure:733: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -746,7 +747,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:750: checking build system type" >&5 +echo "configure:751: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -790,7 +791,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:794: checking for $ac_word" >&5 +echo "configure:795: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -798,7 +799,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -819,7 +821,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:823: checking for $ac_word" >&5 +echo "configure:825: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -828,7 +830,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -869,7 +872,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:873: checking for $ac_word" >&5 +echo "configure:876: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -877,7 +880,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -900,7 +904,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:904: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:908: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -909,12 +913,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 914 "configure" +cat > conftest.$ac_ext << EOF + +#line 919 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -928,18 +934,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:950: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:943: checking whether we are using GNU C" >&5 +echo "configure:955: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -948,7 +960,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:952: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -967,7 +979,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:971: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:983: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1010,7 +1022,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1014: checking for a BSD compatible install" >&5 +echo "configure:1026: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1058,6 +1070,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -1070,7 +1084,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1074: checking for $ac_word" >&5 +echo "configure:1088: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1078,7 +1092,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -1107,7 +1122,7 @@ fi ALL_LINGUAS= echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1111: checking how to run the C preprocessor" >&5 +echo "configure:1126: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1122,13 +1137,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1126 "configure" +#line 1141 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1147: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1139,13 +1154,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1143 "configure" +#line 1158 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1164: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1156,13 +1171,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 1160 "configure" +#line 1175 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1187,7 +1202,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1191: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:1206: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1214,7 +1229,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:1218: checking for POSIXized ISC" >&5 +echo "configure:1233: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -1235,12 +1250,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1239: checking for ANSI C header files" >&5 +echo "configure:1254: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1244 "configure" +#line 1259 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -1248,7 +1263,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1267: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1265,7 +1280,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1269 "configure" +#line 1284 "configure" #include "confdefs.h" #include <string.h> EOF @@ -1283,7 +1298,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1287 "configure" +#line 1302 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -1304,7 +1319,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 1308 "configure" +#line 1323 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1315,7 +1330,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1339,12 +1354,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1343: checking for working const" >&5 +echo "configure:1358: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1348 "configure" +#line 1363 "configure" #include "confdefs.h" int main() { @@ -1393,7 +1408,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:1397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1412: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1414,21 +1429,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1418: checking for inline" >&5 +echo "configure:1433: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 1425 "configure" +#line 1440 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:1432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1454,12 +1469,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1458: checking for off_t" >&5 +echo "configure:1473: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1463 "configure" +#line 1478 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1468,7 +1483,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1487,12 +1502,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1491: checking for size_t" >&5 +echo "configure:1506: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1496 "configure" +#line 1511 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1501,7 +1516,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1522,19 +1537,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1526: checking for working alloca.h" >&5 +echo "configure:1541: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1531 "configure" +#line 1546 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1555,12 +1570,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1559: checking for alloca" >&5 +echo "configure:1574: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1564 "configure" +#line 1579 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1588,7 +1603,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1620,12 +1635,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1624: checking whether alloca needs Cray hooks" >&5 +echo "configure:1639: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1629 "configure" +#line 1644 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1650,12 +1665,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1654: checking for $ac_func" >&5 +echo "configure:1669: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1659 "configure" +#line 1674 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1678,7 +1693,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1705,7 +1720,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1709: checking stack direction for C alloca" >&5 +echo "configure:1724: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1713,7 +1728,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1717 "configure" +#line 1732 "configure" #include "confdefs.h" find_stack_direction () { @@ -1732,7 +1747,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1757,17 +1772,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1761: checking for $ac_hdr" >&5 +echo "configure:1776: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1766 "configure" +#line 1781 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1771: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1796,12 +1811,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1800: checking for $ac_func" >&5 +echo "configure:1815: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1805 "configure" +#line 1820 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1824,7 +1839,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1849,7 +1864,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1853: checking for working mmap" >&5 +echo "configure:1868: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1857,7 +1872,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1861 "configure" +#line 1876 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1997,7 +2012,7 @@ main() } EOF -if { (eval echo configure:2001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -2025,17 +2040,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2029: checking for $ac_hdr" >&5 +echo "configure:2044: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2034 "configure" +#line 2049 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2039: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2054: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2065,12 +2080,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2069: checking for $ac_func" >&5 +echo "configure:2084: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2074 "configure" +#line 2089 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2093,7 +2108,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2122,12 +2137,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2126: checking for $ac_func" >&5 +echo "configure:2141: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2131 "configure" +#line 2146 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2150,7 +2165,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2184,19 +2199,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2188: checking for LC_MESSAGES" >&5 +echo "configure:2203: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2193 "configure" +#line 2208 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2215: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2217,7 +2232,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2221: checking whether NLS is requested" >&5 +echo "configure:2236: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2237,7 +2252,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2241: checking whether included gettext is requested" >&5 +echo "configure:2256: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2256,17 +2271,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2260: checking for libintl.h" >&5 +echo "configure:2275: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2265 "configure" +#line 2280 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2270: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2285: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2283,19 +2298,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2287: checking for gettext in libc" >&5 +echo "configure:2302: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2292 "configure" +#line 2307 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2311,7 +2326,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2315: checking for bindtextdomain in -lintl" >&5 +echo "configure:2330: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2319,7 +2334,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2323 "configure" +#line 2338 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2330,7 +2345,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2346,19 +2361,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2350: checking for gettext in libintl" >&5 +echo "configure:2365: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2355 "configure" +#line 2370 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2386,7 +2401,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2390: checking for $ac_word" >&5 +echo "configure:2405: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2420,12 +2435,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2424: checking for $ac_func" >&5 +echo "configure:2439: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2429 "configure" +#line 2444 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2448,7 +2463,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2452: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2475,7 +2490,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2479: checking for $ac_word" >&5 +echo "configure:2494: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2488,7 +2503,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2510,7 +2526,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2514: checking for $ac_word" >&5 +echo "configure:2530: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2542,7 +2558,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2546 "configure" +#line 2562 "configure" #include "confdefs.h" int main() { @@ -2550,7 +2566,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2582,7 +2598,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2586: checking for $ac_word" >&5 +echo "configure:2602: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2616,7 +2632,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2620: checking for $ac_word" >&5 +echo "configure:2636: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2629,7 +2645,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2651,7 +2668,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2655: checking for $ac_word" >&5 +echo "configure:2672: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2741,7 +2758,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2745: checking for catalogs to be installed" >&5 +echo "configure:2762: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2769,17 +2786,17 @@ echo "configure:2745: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2773: checking for linux/version.h" >&5 +echo "configure:2790: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2778 "configure" +#line 2795 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2783: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2800: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2845,17 +2862,17 @@ for ac_hdr in stdlib.h time.h unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2849: checking for $ac_hdr" >&5 +echo "configure:2866: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2854 "configure" +#line 2871 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2883,19 +2900,19 @@ done echo $ac_n "checking whether printf must be declared""... $ac_c" 1>&6 -echo "configure:2887: checking whether printf must be declared" >&5 +echo "configure:2904: checking whether printf must be declared" >&5 if eval "test \"`echo '$''{'sim_cv_decl_needed_printf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2892 "configure" +#line 2909 "configure" #include "confdefs.h" #include <stdio.h> int main() { int (*pfn) = (int (*)) printf ; return 0; } EOF -if { (eval echo configure:2899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2916: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* sim_cv_decl_needed_printf=no else @@ -2938,7 +2955,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3005,7 +3022,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3049,6 +3066,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3084,6 +3102,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@HDEFINES@%$HDEFINES%g s%@AR@%$AR%g diff --git a/sim/z8k/ChangeLog b/sim/z8k/ChangeLog index 94424f78d14..e211ac5ed5e 100644 --- a/sim/z8k/ChangeLog +++ b/sim/z8k/ChangeLog @@ -1,3 +1,7 @@ +1999-05-08 Felix Lee <flee@cygnus.com> + + * configure: Regenerated to track ../common/aclocal.m4 changes. + Wed Nov 25 18:22:10 1998 Andrew Cagney <cagney@b1.cygnus.com> * support.c: Include <errno.h> diff --git a/sim/z8k/configure b/sim/z8k/configure index 2d910f67b9d..b1ddf2b8e17 100755 --- a/sim/z8k/configure +++ b/sim/z8k/configure @@ -119,21 +119,11 @@ sim_inline="-DDEFAULT_INLINE=0" -# Check to see if we're running under Cygwin32, without using -# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". -# Otherwise set it to "no". - - - -# Check to see if we're running under Win32, without using -# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". -# Otherwise set it to "". - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.2 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -178,6 +168,7 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= +sitefile= srcdir= target=NONE verbose= @@ -292,6 +283,7 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages + --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -462,6 +454,11 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; + -site-file | --site-file | --site-fil | --site-fi | --site-f) + ac_prev=sitefile ;; + -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) + sitefile="$ac_optarg" ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -483,7 +480,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.2" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -627,12 +624,16 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +if test -z "$sitefile"; then + if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi fi +else + CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -673,7 +674,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:677: checking how to run the C preprocessor" >&5 +echo "configure:678: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -688,13 +689,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 692 "configure" +#line 693 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -705,13 +706,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 709 "configure" +#line 710 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -722,13 +723,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 726 "configure" +#line 727 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -753,7 +754,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:757: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:758: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -780,7 +781,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:784: checking for POSIXized ISC" >&5 +echo "configure:785: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -801,12 +802,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:805: checking for ANSI C header files" >&5 +echo "configure:806: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 810 "configure" +#line 811 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -814,7 +815,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:819: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -831,7 +832,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 835 "configure" +#line 836 "configure" #include "confdefs.h" #include <string.h> EOF @@ -849,7 +850,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 853 "configure" +#line 854 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -870,7 +871,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 874 "configure" +#line 875 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -881,7 +882,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -905,12 +906,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:909: checking for working const" >&5 +echo "configure:910: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 914 "configure" +#line 915 "configure" #include "confdefs.h" int main() { @@ -959,7 +960,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -980,21 +981,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:984: checking for inline" >&5 +echo "configure:985: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 991 "configure" +#line 992 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:998: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:999: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1020,12 +1021,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1024: checking for off_t" >&5 +echo "configure:1025: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1029 "configure" +#line 1030 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1034,7 +1035,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1053,12 +1054,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1057: checking for size_t" >&5 +echo "configure:1058: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1062 "configure" +#line 1063 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1067,7 +1068,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -1088,19 +1089,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1092: checking for working alloca.h" >&5 +echo "configure:1093: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1097 "configure" +#line 1098 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1121,12 +1122,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1125: checking for alloca" >&5 +echo "configure:1126: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1130 "configure" +#line 1131 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1154,7 +1155,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1186,12 +1187,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1190: checking whether alloca needs Cray hooks" >&5 +echo "configure:1191: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1195 "configure" +#line 1196 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1216,12 +1217,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1220: checking for $ac_func" >&5 +echo "configure:1221: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1225 "configure" +#line 1226 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1244,7 +1245,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1271,7 +1272,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1275: checking stack direction for C alloca" >&5 +echo "configure:1276: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1279,7 +1280,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1283 "configure" +#line 1284 "configure" #include "confdefs.h" find_stack_direction () { @@ -1298,7 +1299,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1323,17 +1324,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1327: checking for $ac_hdr" >&5 +echo "configure:1328: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1332 "configure" +#line 1333 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1362,12 +1363,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_func" >&5 +echo "configure:1367: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1371 "configure" +#line 1372 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1390,7 +1391,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1415,7 +1416,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1419: checking for working mmap" >&5 +echo "configure:1420: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1423,7 +1424,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 1427 "configure" +#line 1428 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -1563,7 +1564,7 @@ main() } EOF -if { (eval echo configure:1567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1585,6 +1586,68 @@ EOF fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:1591: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1596 "configure" +#include "confdefs.h" + +int main() { + +#ifndef __CYGWIN__ +#define __CYGWIN__ __CYGWIN32__ +#endif +return __CYGWIN__; +; return 0; } +EOF +if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:1624: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1629 "configure" +#include "confdefs.h" + +int main() { +return __MINGW32__; +; return 0; } +EOF +if { (eval echo configure:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes # autoconf.info says this should be called right after AC_INIT. @@ -1636,7 +1699,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1640: checking host system type" >&5 +echo "configure:1703: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1657,7 +1720,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1661: checking target system type" >&5 +echo "configure:1724: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1675,7 +1738,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1679: checking build system type" >&5 +echo "configure:1742: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1719,7 +1782,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1723: checking for $ac_word" >&5 +echo "configure:1786: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1727,7 +1790,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1748,7 +1812,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1752: checking for $ac_word" >&5 +echo "configure:1816: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1757,7 +1821,8 @@ else else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1798,7 +1863,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1802: checking for $ac_word" >&5 +echo "configure:1867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1806,7 +1871,8 @@ else ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" @@ -1829,7 +1895,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1833: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1838,12 +1904,14 @@ ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext <<EOF -#line 1843 "configure" +cat > conftest.$ac_ext << EOF + +#line 1910 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1857,18 +1925,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1867: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1872: checking whether we are using GNU C" >&5 +echo "configure:1946: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1877,7 +1951,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1896,7 +1970,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1900: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1974: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1939,7 +2013,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1943: checking for a BSD compatible install" >&5 +echo "configure:2017: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1987,6 +2061,8 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' @@ -2005,7 +2081,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2009: checking for $ac_word" >&5 +echo "configure:2085: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2013,7 +2089,8 @@ else ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -2039,17 +2116,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2043: checking for $ac_hdr" >&5 +echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2048 "configure" +#line 2125 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2079,12 +2156,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2083: checking for $ac_func" >&5 +echo "configure:2160: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2088 "configure" +#line 2165 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2107,7 +2184,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2136,12 +2213,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2140: checking for $ac_func" >&5 +echo "configure:2217: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2145 "configure" +#line 2222 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2164,7 +2241,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2198,19 +2275,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2202: checking for LC_MESSAGES" >&5 +echo "configure:2279: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2207 "configure" +#line 2284 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2231,7 +2308,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2235: checking whether NLS is requested" >&5 +echo "configure:2312: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2251,7 +2328,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2255: checking whether included gettext is requested" >&5 +echo "configure:2332: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2270,17 +2347,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2274: checking for libintl.h" >&5 +echo "configure:2351: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2279 "configure" +#line 2356 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2361: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2297,19 +2374,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2301: checking for gettext in libc" >&5 +echo "configure:2378: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2306 "configure" +#line 2383 "configure" #include "confdefs.h" #include <libintl.h> int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2325,7 +2402,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2329: checking for bindtextdomain in -lintl" >&5 +echo "configure:2406: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2333,7 +2410,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <<EOF -#line 2337 "configure" +#line 2414 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -2344,7 +2421,7 @@ int main() { bindtextdomain() ; return 0; } EOF -if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2360,19 +2437,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2364: checking for gettext in libintl" >&5 +echo "configure:2441: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2369 "configure" +#line 2446 "configure" #include "confdefs.h" int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2400,7 +2477,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2404: checking for $ac_word" >&5 +echo "configure:2481: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2434,12 +2511,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_func" >&5 +echo "configure:2515: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2443 "configure" +#line 2520 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2462,7 +2539,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2489,7 +2566,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2493: checking for $ac_word" >&5 +echo "configure:2570: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2502,7 +2579,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2524,7 +2602,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2528: checking for $ac_word" >&5 +echo "configure:2606: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2556,7 +2634,7 @@ else fi cat > conftest.$ac_ext <<EOF -#line 2560 "configure" +#line 2638 "configure" #include "confdefs.h" int main() { @@ -2564,7 +2642,7 @@ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2596,7 +2674,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2600: checking for $ac_word" >&5 +echo "configure:2678: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2630,7 +2708,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2634: checking for $ac_word" >&5 +echo "configure:2712: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2643,7 +2721,8 @@ else ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2665,7 +2744,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2669: checking for $ac_word" >&5 +echo "configure:2748: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2755,7 +2834,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2759: checking for catalogs to be installed" >&5 +echo "configure:2838: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2783,17 +2862,17 @@ echo "configure:2759: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2787: checking for linux/version.h" >&5 +echo "configure:2866: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2792 "configure" +#line 2871 "configure" #include "confdefs.h" #include <linux/version.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2862,17 +2941,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2866: checking for $ac_hdr" >&5 +echo "configure:2945: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2871 "configure" +#line 2950 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2902,17 +2981,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2906: checking for $ac_hdr" >&5 +echo "configure:2985: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2911 "configure" +#line 2990 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2916: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2995: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2942,17 +3021,57 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_hdr" >&5 +echo "configure:3025: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3030 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +for ac_hdr in dlfcn.h errno.h sys/stat.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3065: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2951 "configure" +#line 3070 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2981,12 +3100,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_func" >&5 +echo "configure:3104: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2990 "configure" +#line 3109 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3009,7 +3128,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3013: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3036,7 +3155,7 @@ done # Check for socket libraries echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6 -echo "configure:3040: checking for bind in -lsocket" >&5 +echo "configure:3159: checking for bind in -lsocket" >&5 ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3044,7 +3163,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lsocket $LIBS" cat > conftest.$ac_ext <<EOF -#line 3048 "configure" +#line 3167 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3055,7 +3174,7 @@ int main() { bind() ; return 0; } EOF -if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3083,7 +3202,7 @@ else fi echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:3087: checking for gethostbyname in -lnsl" >&5 +echo "configure:3206: checking for gethostbyname in -lnsl" >&5 ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -3091,7 +3210,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lnsl $LIBS" cat > conftest.$ac_ext <<EOF -#line 3095 "configure" +#line 3214 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -3102,7 +3221,7 @@ int main() { gethostbyname() ; return 0; } EOF -if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -3278,12 +3397,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3282: checking return type of signal handlers" >&5 +echo "configure:3401: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3287 "configure" +#line 3406 "configure" #include "confdefs.h" #include <sys/types.h> #include <signal.h> @@ -3300,7 +3419,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3319,29 +3438,38 @@ EOF + + echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3324: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then +echo "configure:3445: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test "$CYGWIN32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi - -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi + EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT sim_link_files= @@ -3368,17 +3496,17 @@ for ac_hdr in string.h strings.h stdlib.h time.h sys/times.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3372: checking for $ac_hdr" >&5 +echo "configure:3500: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3377 "configure" +#line 3505 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3382: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3430,7 +3558,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3497,7 +3625,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3541,6 +3669,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3576,6 +3705,7 @@ s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@CC@%$CC%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@HDEFINES@%$HDEFINES%g |