diff options
-rw-r--r-- | gdb/ChangeLog | 17 | ||||
-rw-r--r-- | gdb/Makefile.in | 5 | ||||
-rw-r--r-- | gdb/README | 1 | ||||
-rw-r--r-- | gdb/acinclude.m4 | 36 | ||||
-rw-r--r-- | gdb/config/alpha/tm-alpha.h | 2 | ||||
-rw-r--r-- | gdb/defs.h | 2 | ||||
-rw-r--r-- | gdb/doc/ChangeLog | 10 | ||||
-rw-r--r-- | gdb/doc/gdb.texinfo | 80 | ||||
-rw-r--r-- | gdb/doc/gdbint.texinfo | 16 | ||||
-rw-r--r-- | gdb/i386-tdep.c | 20 | ||||
-rw-r--r-- | gdb/nlmread.c | 237 | ||||
-rw-r--r-- | gdb/osabi.c | 2 | ||||
-rw-r--r-- | gdb/target.c | 2 | ||||
-rw-r--r-- | gdb/testsuite/ChangeLog | 4 | ||||
-rw-r--r-- | gdb/testsuite/config/netware.exp | 219 | ||||
-rw-r--r-- | gdb/thread.c | 2 |
16 files changed, 38 insertions, 617 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 9fa0b194914..4f34bf5cfc4 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,20 @@ +2007-03-30 Daniel Jacobowitz <dan@codesourcery.com> + + * Makefile.in (SFILES): Remove nlmread.c. + (COMMON_OBS): Remove nlmread.o. + (nlmread.o): Delete rule. + * README: Delete reference to remote-st.c. + * acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete. + * defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and + GDB_OSABI_LYNXOS. + * i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete. + (_initialize_i386_tdep): Do not reference them. + * nlmread.c: Delete file. + * osabi.c (gdb_osabi_names): Remove NetWare and LynxOS. + * target.c: Doc update. + * thread.c: Delete commented include. + * config/alpha/tm-alpha.h: Doc update. + 2007-03-30 Chris Dearman <chris@mips.com> * utils.c (string_to_core_addr): Comment typo. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 40d465833fc..e2751479df1 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -548,7 +548,6 @@ SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c \ m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \ macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \ mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \ - nlmread.c \ objc-exp.y objc-lang.c \ objfiles.c osabi.c observer.c \ p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \ @@ -969,7 +968,7 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \ complaints.o typeprint.o \ ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \ ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \ - nlmread.o serial.o mdebugread.o top.o utils.o \ + serial.o mdebugread.o top.o utils.o \ ui-file.o \ user-regs.o \ frame.o frame-unwind.o doublest.o \ @@ -2424,8 +2423,6 @@ ms1-tdep.o: ms1-tdep.c $(defs_h) $(frame_h) $(frame_unwind_h) $(frame_base_h) \ $(gdb_assert_h) nbsd-nat.o: nbsd-nat.c $(defs_h) $(nbsd_nat_h) nbsd-tdep.o: nbsd-tdep.c $(defs_h) $(gdb_string_h) $(solib_svr4_h) -nlmread.o: nlmread.c $(defs_h) $(bfd_h) $(symtab_h) $(symfile_h) \ - $(objfiles_h) $(buildsym_h) $(stabsread_h) $(block_h) nto-procfs.o: nto-procfs.c $(defs_h) $(gdb_dirent_h) $(exceptions_h) \ $(gdb_string_h) $(gdbcore_h) $(inferior_h) $(target_h) $(objfiles_h) \ $(gdbthread_h) $(nto_tdep_h) $(command_h) $(regcache_h) $(solib_h) diff --git a/gdb/README b/gdb/README index 860c30e9dc4..05b3fab02ed 100644 --- a/gdb/README +++ b/gdb/README @@ -461,7 +461,6 @@ monitors and other hardware: remote-mips.c MIPS remote debugging protocol remote-sds.c PowerPC SDS monitor remote-sim.c Generalized simulator protocol - remote-st.c Tandem ST-2000 monitor Reporting Bugs in GDB diff --git a/gdb/acinclude.m4 b/gdb/acinclude.m4 index 6d51234a244..64bc19211f6 100644 --- a/gdb/acinclude.m4 +++ b/gdb/acinclude.m4 @@ -17,42 +17,6 @@ sinclude(../config/lib-ld.m4) sinclude(../config/lib-prefix.m4) sinclude(../config/lib-link.m4) -dnl CYGNUS LOCAL: This gets the right posix flag for gcc -AC_DEFUN([CY_AC_TCL_LYNX_POSIX], -[AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AC_PROG_CPP]) -AC_MSG_CHECKING([if running LynxOS]) -AC_CACHE_VAL(ac_cv_os_lynx, -[AC_EGREP_CPP(yes, -[/* - * The old Lynx "cc" only defines "Lynx", but the newer one uses "__Lynx__" - */ -#if defined(__Lynx__) || defined(Lynx) -yes -#endif -], ac_cv_os_lynx=yes, ac_cv_os_lynx=no)]) -# -if test "$ac_cv_os_lynx" = "yes" ; then - AC_MSG_RESULT(yes) - AC_DEFINE(LYNX) - AC_MSG_CHECKING([whether -mposix or -X is available]) - AC_CACHE_VAL(ac_cv_c_posix_flag, - [AC_TRY_COMPILE(,[ - /* - * This flag varies depending on how old the compiler is. - * -X is for the old "cc" and "gcc" (based on 1.42). - * -mposix is for the new gcc (at least 2.5.8). - */ - #if defined(__GNUC__) && __GNUC__ >= 2 - choke me - #endif - ], ac_cv_c_posix_flag=" -mposix", ac_cv_c_posix_flag=" -X")]) - CC="$CC $ac_cv_c_posix_flag" - AC_MSG_RESULT($ac_cv_c_posix_flag) - else - AC_MSG_RESULT(no) -fi -]) - # # Sometimes the native compiler is a bogus stub for gcc or /usr/ucb/cc. This # makes configure think it's cross compiling. If --target wasn't used, then diff --git a/gdb/config/alpha/tm-alpha.h b/gdb/config/alpha/tm-alpha.h index 637faa14565..514487fdf96 100644 --- a/gdb/config/alpha/tm-alpha.h +++ b/gdb/config/alpha/tm-alpha.h @@ -1,5 +1,5 @@ /* Definitions to make GDB run on an Alpha box under OSF1. This is - also used by the Alpha/Netware and Alpha GNU/Linux targets. + also used by the Alpha GNU/Linux target. Copyright 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2002, 2004, 2007 Free Software Foundation, Inc. diff --git a/gdb/defs.h b/gdb/defs.h index e26692ca7a5..7debbd612e0 100644 --- a/gdb/defs.h +++ b/gdb/defs.h @@ -979,9 +979,7 @@ enum gdb_osabi GDB_OSABI_OPENBSD_ELF, GDB_OSABI_WINCE, GDB_OSABI_GO32, - GDB_OSABI_NETWARE, GDB_OSABI_IRIX, - GDB_OSABI_LYNXOS, GDB_OSABI_INTERIX, GDB_OSABI_HPUX_ELF, GDB_OSABI_HPUX_SOM, diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 7827a54e7c9..92424335647 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,13 @@ +2007-03-30 Daniel Jacobowitz <dan@codesourcery.com> + + * gdb.texinfo (Startup): Delete references to some alternate + names for .gdbinit. + (Thread): Remove LynxOS reference. + (Tandem ST2000): Delete target-specific documentation. + * gdbint.texinfo (Symbol Handling): Remove mention of NLM. + (Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE + and GDB_OSABI_LYNXOS. + 2007-03-29 Ulrich Weigand <uweigand@de.ibm.com> * gdbint.texi (Native Conditionals): Remove PTRACE_ARG3_TYPE. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index c3bb561a5a5..0eee55e4d34 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -1240,38 +1240,14 @@ option (@pxref{Mode Options, ,Choosing modes}). @cindex init file name @cindex @file{.gdbinit} -The @value{GDBN} init files are normally called @file{.gdbinit}. -On some configurations of @value{GDBN}, the init file is known by a -different name (these are typically environments where a specialized -form of @value{GDBN} may need to coexist with other forms, hence a -different name for the specialized version's init file). These are the -environments with special init file names: - -@itemize @bullet @cindex @file{gdb.ini} -@item +The @value{GDBN} init files are normally called @file{.gdbinit}. The DJGPP port of @value{GDBN} uses the name @file{gdb.ini}, due to the limitations of file names imposed by DOS filesystems. The Windows ports of @value{GDBN} use the standard name, but if they find a @file{gdb.ini} file, they warn you about that and suggest to rename the file to the standard name. -@cindex @file{.vxgdbinit} -@item -VxWorks (Wind River Systems real-time OS): @file{.vxgdbinit} - -@cindex @file{.os68gdbinit} -@item -OS68K (Enea Data Systems real-time OS): @file{.os68gdbinit} - -@cindex @file{.esgdbinit} -@item -ES-1800 (Ericsson Telecom AB M68000 emulator): @file{.esgdbinit} - -@item -CISCO 68k: @file{.cisco-gdbinit} -@end itemize - @node Quitting GDB @section Quitting @value{GDBN} @@ -2296,10 +2272,10 @@ Whenever @value{GDBN} detects a new thread in your program, it displays the target system's identification for the thread with a message in the form @samp{[New @var{systag}]}. @var{systag} is a thread identifier whose form varies depending on the particular system. For example, on -LynxOS, you might see +@sc{gnu}/Linux, you might see @smallexample -[New process 35 thread 27] +[New Thread 46912507313328 (LWP 25582)] @end smallexample @noindent @@ -14294,7 +14270,6 @@ acceptable commands. * SH:: Renesas SH * Sparclet:: Tsqware Sparclet * Sparclite:: Fujitsu Sparclite -* ST2000:: Tandem ST2000 * Z8000:: Zilog Z8000 * AVR:: Atmel AVR * CRIS:: CRIS @@ -15324,55 +15299,6 @@ remote protocol. @end table -@node ST2000 -@subsection Tandem ST2000 - -@value{GDBN} may be used with a Tandem ST2000 phone switch, running Tandem's -STDBUG protocol. - -To connect your ST2000 to the host system, see the manufacturer's -manual. Once the ST2000 is physically attached, you can run: - -@smallexample -target st2000 @var{dev} @var{speed} -@end smallexample - -@noindent -to establish it as your debugging environment. @var{dev} is normally -the name of a serial device, such as @file{/dev/ttya}, connected to the -ST2000 via a serial line. You can instead specify @var{dev} as a TCP -connection (for example, to a serial line attached via a terminal -concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}. - -The @code{load} and @code{attach} commands are @emph{not} defined for -this target; you must load your program into the ST2000 as you normally -would for standalone operation. @value{GDBN} reads debugging information -(such as symbols) from a separate, debugging version of the program -available on your host computer. -@c FIXME!! This is terribly vague; what little content is here is -@c basically hearsay. - -@cindex ST2000 auxiliary commands -These auxiliary @value{GDBN} commands are available to help you with the ST2000 -environment: - -@table @code -@item st2000 @var{command} -@kindex st2000 @var{cmd} -@cindex STDBUG commands (ST2000) -@cindex commands to STDBUG (ST2000) -Send a @var{command} to the STDBUG monitor. See the manufacturer's -manual for available commands. - -@item connect -@cindex connect (to STDBUG) -Connect the controlling terminal to the STDBUG command monitor. When -you are done interacting with STDBUG, typing either of two character -sequences gets you back to the @value{GDBN} command prompt: -@kbd{@key{RET} ~ .} (Return, followed by tilde and period) or -@kbd{@key{RET} ~ Ctrl-d} (Return, followed by tilde and control-D). -@end table - @node Z8000 @subsection Zilog Z8000 diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo index 00b849cf404..0479a3ec6c0 100644 --- a/gdb/doc/gdbint.texinfo +++ b/gdb/doc/gdbint.texinfo @@ -39,7 +39,7 @@ Free Documentation License''. @page @tex \def\$#1${{#1}} % Kluge: collect RCS revision info without $...$ -\xdef\manvers{\$Revision: 1.255 $} % For use in headers, footers too +\xdef\manvers{\$Revision: 1.256 $} % For use in headers, footers too {\parskip=0pt \hfill Cygnus Solutions\par \hfill \manvers\par @@ -2114,12 +2114,6 @@ SOM, which is a cross-language ABI). The SOM reader is in @file{hpread.c}. -@subsection Other File Formats - -@cindex Netware Loadable Module format -Other file formats that have been supported by @value{GDBN} include Netware -Loadable Modules (@file{nlmread.c}). - @section Debugging File Formats This section describes characteristics of debugging information that @@ -2677,18 +2671,10 @@ Windows CE. @item GDB_OSABI_GO32 DJGPP. -@findex GDB_OSABI_NETWARE -@item GDB_OSABI_NETWARE -Novell NetWare. - @findex GDB_OSABI_IRIX @item GDB_OSABI_IRIX Irix. -@findex GDB_OSABI_LYNXOS -@item GDB_OSABI_LYNXOS -LynxOS. - @findex GDB_OSABI_INTERIX @item GDB_OSABI_INTERIX Interix (Posix layer for MS-Windows systems). diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c index 4d9583d345c..32f0e97d669 100644 --- a/gdb/i386-tdep.c +++ b/gdb/i386-tdep.c @@ -2195,16 +2195,6 @@ i386_go32_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) tdep->jb_pc_offset = 36; } - -/* NetWare. */ - -static void -i386_nw_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - - tdep->jb_pc_offset = 24; -} /* i386 register groups. In addition to the normal groups, add "mmx" @@ -2469,12 +2459,6 @@ i386_coff_osabi_sniffer (bfd *abfd) return GDB_OSABI_UNKNOWN; } - -static enum gdb_osabi -i386_nlm_osabi_sniffer (bfd *abfd) -{ - return GDB_OSABI_NETWARE; -} /* Provide a prototype to silence -Wmissing-prototypes. */ @@ -2509,15 +2493,11 @@ is \"default\"."), gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_coff_flavour, i386_coff_osabi_sniffer); - gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_nlm_flavour, - i386_nlm_osabi_sniffer); gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_SVR4, i386_svr4_init_abi); gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_GO32, i386_go32_init_abi); - gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_NETWARE, - i386_nw_init_abi); /* Initialize the i386-specific register groups & types. */ i386_init_reggroups (); diff --git a/gdb/nlmread.c b/gdb/nlmread.c deleted file mode 100644 index 65368c30465..00000000000 --- a/gdb/nlmread.c +++ /dev/null @@ -1,237 +0,0 @@ -/* Read NLM (NetWare Loadable Module) format executable files for GDB. - Copyright (C) 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2007 - Free Software Foundation, Inc. - Written by Fred Fish at Cygnus Support (fnf@cygnus.com). - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -#include "defs.h" -#include "bfd.h" -#include "symtab.h" -#include "symfile.h" -#include "objfiles.h" -#include "buildsym.h" -#include "stabsread.h" -#include "block.h" - -extern void _initialize_nlmread (void); - -static void nlm_new_init (struct objfile *); - -static void nlm_symfile_init (struct objfile *); - -static void nlm_symfile_read (struct objfile *, int); - -static void nlm_symfile_finish (struct objfile *); - -static void nlm_symtab_read (bfd *, CORE_ADDR, struct objfile *); - -/* Initialize anything that needs initializing when a completely new symbol - file is specified (not just adding some symbols from another file, e.g. a - shared library). - - We reinitialize buildsym, since gdb will be able to read stabs from an NLM - file at some point in the near future. */ - -static void -nlm_new_init (struct objfile *ignore) -{ - stabsread_new_init (); - buildsym_new_init (); -} - - -/* NLM specific initialization routine for reading symbols. - - It is passed a pointer to a struct sym_fns which contains, among other - things, the BFD for the file whose symbols are being read, and a slot for - a pointer to "private data" which we can fill with goodies. - - For now at least, we have nothing in particular to do, so this function is - just a stub. */ - -static void -nlm_symfile_init (struct objfile *ignore) -{ -} - -/* - - LOCAL FUNCTION - - nlm_symtab_read -- read the symbol table of an NLM file - - SYNOPSIS - - void nlm_symtab_read (bfd *abfd, CORE_ADDR addr, - struct objfile *objfile) - - DESCRIPTION - - Given an open bfd, a base address to relocate symbols to, and a - flag that specifies whether or not this bfd is for an executable - or not (may be shared library for example), add all the global - function and data symbols to the minimal symbol table. - */ - -static void -nlm_symtab_read (bfd *abfd, CORE_ADDR addr, struct objfile *objfile) -{ - long storage_needed; - asymbol *sym; - asymbol **symbol_table; - long number_of_symbols; - long i; - struct cleanup *back_to; - CORE_ADDR symaddr; - enum minimal_symbol_type ms_type; - - storage_needed = bfd_get_symtab_upper_bound (abfd); - if (storage_needed < 0) - error (_("Can't read symbols from %s: %s"), bfd_get_filename (abfd), - bfd_errmsg (bfd_get_error ())); - if (storage_needed > 0) - { - symbol_table = (asymbol **) xmalloc (storage_needed); - back_to = make_cleanup (xfree, symbol_table); - number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table); - if (number_of_symbols < 0) - error (_("Can't read symbols from %s: %s"), bfd_get_filename (abfd), - bfd_errmsg (bfd_get_error ())); - - for (i = 0; i < number_of_symbols; i++) - { - sym = symbol_table[i]; - if ( /*sym -> flags & BSF_GLOBAL */ 1) - { - /* Bfd symbols are section relative. */ - symaddr = sym->value + sym->section->vma; - /* Relocate all non-absolute symbols by base address. */ - if (sym->section != &bfd_abs_section) - symaddr += addr; - - /* For non-absolute symbols, use the type of the section - they are relative to, to intuit text/data. BFD provides - no way of figuring this out for absolute symbols. */ - if (sym->section->flags & SEC_CODE) - ms_type = mst_text; - else if (sym->section->flags & SEC_DATA) - ms_type = mst_data; - else - ms_type = mst_unknown; - - prim_record_minimal_symbol (sym->name, symaddr, ms_type, - objfile); - } - } - do_cleanups (back_to); - } -} - - -/* Scan and build partial symbols for a symbol file. - We have been initialized by a call to nlm_symfile_init, which - currently does nothing. - - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols - in each section. We simplify it down to a single offset for all - symbols. FIXME. - - MAINLINE is true if we are reading the main symbol - table (as opposed to a shared lib or dynamically loaded file). - - This function only does the minimum work necessary for letting the - user "name" things symbolically; it does not read the entire symtab. - Instead, it reads the external and static symbols and puts them in partial - symbol tables. When more extensive information is requested of a - file, the corresponding partial symbol table is mutated into a full - fledged symbol table by going back and reading the symbols - for real. - - Note that NLM files have two sets of information that is potentially - useful for building gdb's minimal symbol table. The first is a list - of the publically exported symbols, and is currently used to build - bfd's canonical symbol table. The second is an optional native debugging - format which contains additional symbols (and possibly duplicates of - the publically exported symbols). The optional native debugging format - is not currently used. */ - -static void -nlm_symfile_read (struct objfile *objfile, int mainline) -{ - bfd *abfd = objfile->obfd; - struct cleanup *back_to; - CORE_ADDR offset; - - init_minimal_symbol_collection (); - back_to = make_cleanup_discard_minimal_symbols (); - - /* FIXME, should take a section_offsets param, not just an offset. */ - - offset = ANOFFSET (objfile->section_offsets, 0); - - /* Process the NLM export records, which become the bfd's canonical symbol - table. */ - - nlm_symtab_read (abfd, offset, objfile); - - /* Install any minimal symbols that have been collected as the current - minimal symbols for this objfile. */ - - install_minimal_symbols (objfile); - do_cleanups (back_to); - - stabsect_build_psymtabs (objfile, mainline, ".stab", - ".stabstr", ".text"); - /* FIXME: We could locate and read the optional native debugging format - here and add the symbols to the minimal symbol table. */ -} - - -/* Perform any local cleanups required when we are done with a particular - objfile. I.E, we are in the process of discarding all symbol information - for an objfile, freeing up all memory held for it, and unlinking the - objfile struct from the global list of known objfiles. */ - -static void -nlm_symfile_finish (struct objfile *objfile) -{ - if (objfile->deprecated_sym_private != NULL) - { - xfree (objfile->deprecated_sym_private); - } -} - -/* Register that we are able to handle NLM file format. */ - -static struct sym_fns nlm_sym_fns = -{ - bfd_target_nlm_flavour, - nlm_new_init, /* sym_new_init: init anything gbl to entire symtab */ - nlm_symfile_init, /* sym_init: read initial info, setup for sym_read() */ - nlm_symfile_read, /* sym_read: read a symbol file into symtab */ - nlm_symfile_finish, /* sym_finish: finished with file, cleanup */ - default_symfile_offsets, /* sym_offsets: Translate ext. to int. relocation */ - NULL /* next: pointer to next struct sym_fns */ -}; - -void -_initialize_nlmread (void) -{ - add_symtab_fns (&nlm_sym_fns); -} diff --git a/gdb/osabi.c b/gdb/osabi.c index 55de9f007a3..e7db132856f 100644 --- a/gdb/osabi.c +++ b/gdb/osabi.c @@ -64,9 +64,7 @@ static const char * const gdb_osabi_names[] = "OpenBSD ELF", "Windows CE", "DJGPP", - "NetWare", "Irix", - "LynxOS", "Interix", "HP/UX ELF", "HP/UX SOM", diff --git a/gdb/target.c b/gdb/target.c index 7d9d315795a..b4857ca034d 100644 --- a/gdb/target.c +++ b/gdb/target.c @@ -1970,7 +1970,7 @@ generic_mourn_inferior (void) deprecated_detach_hook (); } -/* Helper function for child_wait and the Lynx derivatives of child_wait. +/* Helper function for child_wait and the derivatives of child_wait. HOSTSTATUS is the waitstatus from wait() or the equivalent; store our translation of that in OURSTATUS. */ void diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index e25b0c2932d..beea1bcda73 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2007-03-30 Daniel Jacobowitz <dan@codesourcery.com> + + * config/netware.exp: Delete file. + 2007-03-29 Joel Brobecker <brobecker@adacore.com> * gdb.dwarf2/dw2-noloc.S: New file. diff --git a/gdb/testsuite/config/netware.exp b/gdb/testsuite/config/netware.exp deleted file mode 100644 index 0b6e8d4cc94..00000000000 --- a/gdb/testsuite/config/netware.exp +++ /dev/null @@ -1,219 +0,0 @@ -# Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 2007 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# This file was written by J.T. Conklin. (jtc@cygnus.com) - -load_lib gdb.exp -load_lib remote.exp - -global shell_id - -global LD -if ![info exists LD] then { - set LD [findfile "$base_dir/../../ld/ld.new"] -} - -global NLMCONV -if ![info exists NLMCONV] then { - set NLMCONV [findfile "$base_dir/../../binutils/nlmconv"] -} - -# -# gdb_version -- extract and print the version number of gcc -# -proc gdb_version {} { - default_gdb_version -} - -# -# gdb_unload -- unload a file if one is loaded -# - -# -# gdb_load -- load a file into the debugger. -# return a -1 if anything goes wrong. -# -proc gdb_load { arg } { - global gdb_prompt - global LD - global NLMCONV - global errorCode - global shell_id - - # FIXME: this is wrong. - set targetname [target_info name]; - - set obj [file tail $arg] - set nlm "$obj.nlm" - set lnk "$obj.lnk" - - # build *.lnk file - set fd [open $lnk w] - puts $fd "description \"[file tail $nlm]\"" - puts $fd "screenname \"System Console\"" - puts $fd "module clib.nlm" - puts $fd "module mathlib.nlm" - puts $fd "stack 32768" -# puts $fd "stack 64512" - puts $fd "debug" - # FIXME: don't hardcode location of prelude.o - puts $fd "input /s1/cygnus/dejagnu/i386-netware/lib/prelude.o" - puts $fd "input $arg" - puts $fd "output $nlm" - close $fd - - # run nlmconv - verbose "Executing: $NLMCONV -l$LD -T$lnk" 1 - catch "exec $NLMCONV -l$LD -T$lnk" output - if ![string match "" $output] then { - verbose $output 1 - } - if ![string match "NONE" $errorCode] { - warning "Can't link $arg" - - return -1 - } - catch "exec rm -f $lnk" - - # download - verbose "Downloading $nlm" 1 - catch "exec cp $nlm /.NetWare/$targetname.nws/sys.nwv/tmp/x.nlm" output - if ![string match "" $output] then { - verbose $output 1 - return -1 - } - - gdb_file_cmd $nlm -} - -proc gdb_run_cmd { } { - global shell_id - global gdb_prompt - global timeout - - set connhost [target_info name]; - if [board_info $connhost exists serial] { - set serialport [board_info $connhost serial]; - } else { - set serialport [board_info $connhost netport]; - } - - if [board_info $connhost exists baud] { - set baud [board_info $connhost baud]; - } else { - set baud 9600; - } - # FIXME: This is wrong. - send "kill\n" - gdb_expect { - -re ".*Kill the program being debugged.*y or n. $" { - send "y\n" - exp_continue - } - -re ".*$gdb_prompt $" {} - } - - verbose "Starting GDB stub on [target_info name]" 1 - send -i $shell_id "load nlmstub BAUD=$baud x.nlm\r\n" - - send "set remotebaud $baud\n" - gdb_expect { - -re "$gdb_prompt" {} - timeout { - perror "Couldn't set remote baud rate" - return - } - } - - set otimeout $timeout - set timeout 60 - verbose "Timeout is now $timeout seconds" 2 - send "target remote $serialport\n" - gdb_expect { - -re "Couldn't establish connection to remote target" { - send "target remote $serialport\n" - exp_continue - } - -re "$gdb_prompt" {} - timeout { - set timeout $otimeout - verbose "Timeout restored to $timeout seconds" 2 - perror "Couldn't set remote target" - return - } - } - set timeout $otimeout - verbose "Timeout restored to $timeout seconds" 2 - - send "continue\n" - gdb_expect { - "Continuing.$" {} - } - - return -} - - - -# -# start the remote shell -# - -set shell_prompt "Password:" -set shell_id [remote_open target] - -if $shell_id<0 then { - warning "Couldn't connect to target" - return -1 -} - -if [string match "" $passwd] then { - stty -echo - send_user "Password: " - expect_user -re "(.*)\n" - send_user "\n" - set passwd "$expect_out(1,string)" - stty echo -} - -send -i $shell_id "$passwd\n" -gdb_expect { - -i $shell_id ":" { - verbose "Got termtype prompt" 0 - } - - -i $shell_id timeout { - warning "Connection timed out" - return -1 - } -} - - -# FIXME: this is wrong. -set shell_prompt "[string toupper [target_info name]]:" -send -i $shell_id "1\n" - -gdb_expect { - -i $shell_id -re "$shell_prompt" {} - -i $shell_id timeout { - warning "Connection timed out" - return -1 - } -} diff --git a/gdb/thread.c b/gdb/thread.c index 3281988579f..dbfd2dd82dc 100644 --- a/gdb/thread.c +++ b/gdb/thread.c @@ -42,8 +42,6 @@ #include <signal.h> #include "ui-out.h" -/*#include "lynxos-core.h" */ - /* Definition of struct thread_info exported to gdbthread.h */ /* Prototypes for exported functions. */ |