summaryrefslogtreecommitdiff
path: root/gdb/config/z8k
diff options
context:
space:
mode:
Diffstat (limited to 'gdb/config/z8k')
-rw-r--r--gdb/config/z8k/tm-z8k.h287
-rw-r--r--gdb/config/z8k/z8k.mt7
2 files changed, 294 insertions, 0 deletions
diff --git a/gdb/config/z8k/tm-z8k.h b/gdb/config/z8k/tm-z8k.h
new file mode 100644
index 00000000000..babde906c98
--- /dev/null
+++ b/gdb/config/z8k/tm-z8k.h
@@ -0,0 +1,287 @@
+/* Parameters for execution on a z8000 series machine.
+ Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#define IEEE_FLOAT 1
+
+#undef TARGET_INT_BIT
+#undef TARGET_LONG_BIT
+#undef TARGET_SHORT_BIT
+#undef TARGET_PTR_BIT
+
+#define TARGET_SHORT_BIT 16
+#define TARGET_INT_BIT 16
+#define TARGET_LONG_BIT 32
+#define TARGET_PTR_BIT (BIG ? 32: 16)
+
+/* Define the bit, byte, and word ordering of the machine. */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+ Zero on most machines. */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+ to reach some "real" code. */
+
+#define SKIP_PROLOGUE(ip) {(ip) = z8k_skip_prologue(ip);}
+extern CORE_ADDR mz8k_skip_prologue PARAMS ((CORE_ADDR ip));
+
+
+/* Immediately after a function call, return the saved pc.
+ Can't always go through the frames for this because on some machines
+ the new frame is not set up until the new function executes
+ some instructions. */
+
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call(frame)
+
+/* Stack grows downward. */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction. */
+
+#define BREAKPOINT {0x36,0x00}
+
+/* If your kernel resets the pc after the trap happens you may need to
+ define this before including this file. */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are. */
+
+#define REGISTER_TYPE unsigned int
+
+#define NUM_REGS 23 /* 16 registers + 1 ccr + 1 pc + 3 debug
+ regs + fake fp + fake sp*/
+#define REGISTER_BYTES (NUM_REGS *4)
+
+/* Index within `registers' of the first byte of the space for
+ register N. */
+
+#define REGISTER_BYTE(N) ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+ for register N. On the z8k, all but the pc are 2 bytes, but we
+ keep them all as 4 bytes and trim them on I/O */
+
+
+#define REGISTER_RAW_SIZE(N) (((N) < 16)? 2:4)
+
+/* Number of bytes of storage in the program's representation
+ for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have. */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have. */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+ of data in register N. */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (REGISTER_VIRTUAL_SIZE(N) == 2? builtin_type_unsigned_int : builtin_type_long)
+
+/*#define INIT_FRAME_PC(x,y) init_frame_pc(x,y)*/
+/* Initializer for an array of names of registers.
+ Entries beyond the first NUM_REGS are ignored. */
+
+#define REGISTER_NAMES \
+ {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
+ "ccr", "pc", "cycles","insts","time","fp","sp"}
+
+/* Register numbers of various important registers.
+ Note that some of these values are "real" register numbers,
+ and correspond to the general registers of the machine,
+ and some are "phony" register numbers which are too large
+ to be actual register numbers as far as the user is concerned
+ but do serve to get the desired values when passed to read_register. */
+
+#define CCR_REGNUM 16 /* Contains processor status */
+#define PC_REGNUM 17 /* Contains program counter */
+#define CYCLES_REGNUM 18
+#define INSTS_REGNUM 19
+#define TIME_REGNUM 20
+#define FP_REGNUM 21 /* Contains fp, whatever memory model */
+#define SP_REGNUM 22 /* Conatins sp, whatever memory model */
+
+
+
+#define PTR_SIZE (BIG ? 4: 2)
+#define PTR_MASK (BIG ? 0xff00ffff : 0x0000ffff)
+
+/* Store the address of the place in which to copy the structure the
+ subroutine will return. This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) abort();
+
+/* Extract from an array REGBUF containing the (raw) register state
+ a function return value of type TYPE, and copy that, in virtual format,
+ into VALBUF. This is assuming that floating point values are returned
+ as doubles in d0/d1. */
+
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+ memcpy(VALBUF, REGBUF + REGISTER_BYTE(2), TYPE_LENGTH(TYPE));
+
+/* Write into appropriate registers a function return value
+ of type TYPE, given in virtual format. */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) abort();
+
+/* Extract from an array REGBUF containing the (raw) register state
+ the address in which a function should return its structure value,
+ as a CORE_ADDR (or an expression that can be used as one). */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+ (its caller). */
+
+/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
+ chain-pointer.
+ In the case of the Z8000, the frame's nominal address
+ is the address of a ptr sized byte word containing the calling
+ frame's address. */
+
+#define FRAME_CHAIN(thisframe) frame_chain(thisframe);
+
+
+
+/* Define other aspects of the stack frame. */
+
+/* A macro that tells us whether the function invocation represented
+ by FI does not have a frame on the stack associated with it. If it
+ does not, FRAMELESS is set to 1, else 0. */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+ (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+ Can set VAL to -1, meaning no way to tell. */
+
+/* We can't tell how many args there are
+ now that the C compiler delays popping them. */
+#if !defined (FRAME_NUM_ARGS)
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+#endif
+
+/* Return number of bytes at start of arglist that are not really args. */
+
+#define FRAME_ARGS_SKIP 8
+
+#ifdef __STDC__
+struct frame_info;
+#endif
+extern void z8k_frame_init_saved_regs PARAMS ((struct frame_info *));
+#define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi)
+
+
+/* Things needed for making the inferior call functions.
+ It seems like every m68k based machine has almost identical definitions
+ in the individual machine's configuration files. Most other cpu types
+ (mips, i386, etc) have routines in their *-tdep.c files to handle this
+ for most configurations. The m68k family should be able to do this as
+ well. These macros can still be overridden when necessary. */
+
+/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
+ by gdb itself:
+
+ fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
+ moveml d0-a5,sp@- 0x48e7 0xfffc
+ clrw sp@- 0x4267
+ movew ccr,sp@- 0x42e7
+
+ /..* The arguments are pushed at this point by GDB;
+ no code is needed in the dummy for this.
+ The CALL_DUMMY_START_OFFSET gives the position of
+ the following jsr instruction. *../
+
+ jsr @#0x32323232 0x4eb9 0x3232 0x3232
+ addal #0x69696969,sp 0xdffc 0x6969 0x6969
+ trap #<your BPT_VECTOR number here> 0x4e4?
+ nop 0x4e71
+
+ Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
+ We actually start executing at the jsr, since the pushing of the
+ registers is done by PUSH_DUMMY_FRAME. If this were real code,
+ the arguments for the function called by the jsr would be pushed
+ between the moveml and the jsr, and we could allow it to execute through.
+ But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
+ done, and we cannot allow the moveml to push the registers again lest
+ they be taken for the arguments. */
+
+
+#define CALL_DUMMY { 0 }
+#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */
+#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/
+
+
+/* Insert the specified number of args and function address
+ into a call sequence of the above form stored at DUMMYNAME.
+ We use the BFD routines to store a big-endian value of known size. */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+{ bfd_putb32 (fun, (char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \
+ bfd_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
+
+/* Push an empty stack frame, to record the current PC, etc. */
+
+#define PUSH_DUMMY_FRAME { z8k_push_dummy_frame (); }
+
+extern void z8k_push_dummy_frame PARAMS ((void));
+
+extern void z8k_pop_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers. */
+
+#define POP_FRAME { z8k_pop_frame (); }
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+extern CORE_ADDR z8k_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) z8k_addr_bits_remove (addr)
+int sim_z8001_mode;
+#define BIG (sim_z8001_mode)
+
+#define read_memory_short(x) (read_memory_integer(x,2) & 0xffff)
+
+#define NO_STD_REGS
+
+#define PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+
+
+#define INIT_EXTRA_SYMTAB_INFO \
+ z8k_set_pointer_size(objfile->obfd->arch_info->bits_per_address);
+
+#define REGISTER_SIZE 4
+
diff --git a/gdb/config/z8k/z8k.mt b/gdb/config/z8k/z8k.mt
new file mode 100644
index 00000000000..cb8d04376e7
--- /dev/null
+++ b/gdb/config/z8k/z8k.mt
@@ -0,0 +1,7 @@
+# Target: Z8000 with simulator
+TDEPFILES= z8k-tdep.o
+TM_FILE= tm-z8k.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/z8k/libsim.a
+