diff options
Diffstat (limited to 'gdb/remote-e7000.c')
| -rw-r--r-- | gdb/remote-e7000.c | 411 |
1 files changed, 209 insertions, 202 deletions
diff --git a/gdb/remote-e7000.c b/gdb/remote-e7000.c index 9343d53bad1..5e1017f4f7d 100644 --- a/gdb/remote-e7000.c +++ b/gdb/remote-e7000.c @@ -18,7 +18,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ /* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and Hitachi-SH processor. It has serial port and a lan port. @@ -96,11 +97,11 @@ static int e7000_parse_device PARAMS ((char *args, char *dev_name, static serial_t e7000_desc; /* Allow user to chose between using hardware breakpoints or memory. */ -static int use_hard_breakpoints = 0; /* use sw breakpoints by default */ +static int use_hard_breakpoints = 0; /* use sw breakpoints by default */ /* Nonzero if using the tcp serial driver. */ -static int using_tcp; /* direct tcp connection to target */ +static int using_tcp; /* direct tcp connection to target */ static int using_tcp_remote; /* indirect connection to target via tcp to controller */ @@ -195,7 +196,7 @@ readchar (timeout) else if (c < 0) error ("Serial communication error"); - if (remote_debug) + if (remote_debug) { putchar_unfiltered (c); gdb_flush (gdb_stdout); @@ -213,14 +214,14 @@ tl (x) p++; p &= 7; - if (x >= ' ') - { + if (x >= ' ') + { b[p][0] = x; b[p][1] = 0; } else { - sprintf(b[p], "<%d>", x); + sprintf (b[p], "<%d>", x); } return b[p]; @@ -244,20 +245,20 @@ expect (string) c = readchar (timeout); #if 0 notice_quit (); - if (quit_flag == 1) + if (quit_flag == 1) { if (ctrl_c) { - putchar_e7000(CTRLC); + putchar_e7000 (CTRLC); --ctrl_c; } - else + else { quit (); } } #endif - + if (echo) { if (c == '\r' || c == '\n') @@ -503,11 +504,11 @@ e7000_ftp_command (args, from_tty) timeout = oldtimeout; } -static int -e7000_parse_device (args, dev_name, baudrate) - char *args; - char *dev_name; - int baudrate; +static int +e7000_parse_device (args, dev_name, baudrate) + char *args; + char *dev_name; + int baudrate; { char junk[128]; int n = 0; @@ -516,18 +517,18 @@ e7000_parse_device (args, dev_name, baudrate) strcpy (dev_name, args); using_pc = 1; } - else + else { /* FIXME! temp hack to allow use with port master - - target tcp_remote <device> */ - if (args && strncmp (args, "tcp", 10) == 0) - { + target tcp_remote <device> */ + if (args && strncmp (args, "tcp", 10) == 0) + { char com_type[128]; n = sscanf (args, " %s %s %d %s", com_type, dev_name, &baudrate, junk); - using_tcp_remote=1; + using_tcp_remote = 1; n--; - } - else if (args) + } + else if (args) { n = sscanf (args, " %s %d %s", dev_name, &baudrate, junk); } @@ -550,7 +551,7 @@ or \t\ttarget e7000 pc\n"); } #endif if (!using_tcp_remote && strchr (dev_name, ':')) - using_tcp = 1; + using_tcp = 1; } return n; @@ -571,7 +572,7 @@ e7000_start_remote (dummy) /* Hello? Are you there? */ sync = 0; - loop = 0; + loop = 0; try = 0; quit_trying = 20; putchar_e7000 (CTRLC); @@ -600,20 +601,20 @@ e7000_start_remote (dummy) if (c == ':') sync = 1; - if (loop++ == 20) + if (loop++ == 20) { putchar_e7000 (CTRLC); loop = 0; } - QUIT ; + QUIT; if (quit_flag) { putchar_e7000 (CTRLC); /* Was-> quit_flag = 0; */ c = -1; - quit_trying = try+1; /* we don't want to try anymore */ + quit_trying = try + 1; /* we don't want to try anymore */ } else { @@ -624,7 +625,7 @@ e7000_start_remote (dummy) if (!sync) { - fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n",try); + fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n", try); error ("Unable to syncronize with target.\n"); } @@ -677,11 +678,11 @@ e7000_open (args, from_tty) /* Start the remote connection; if error (0), discard this target. In particular, if the user quits, be sure to discard it (we'd be in an inconsistent state otherwise). */ - if (!catch_errors (e7000_start_remote, (char *)0, - "Couldn't establish connection to remote target\n", RETURN_MASK_ALL)) - if (from_tty) - printf_filtered ("Remote target %s connected to %s\n", target_shortname, - dev_name); + if (!catch_errors (e7000_start_remote, (char *) 0, + "Couldn't establish connection to remote target\n", RETURN_MASK_ALL)) + if (from_tty) + printf_filtered ("Remote target %s connected to %s\n", target_shortname, + dev_name); } /* Close out all files and local state before this target loses control. */ @@ -731,7 +732,7 @@ e7000_resume (pid, step, sig) 000218 MOV.B R1L,R2L STEP NORMAL END or BREAK POINT - */ + */ #ifdef GDB_TARGET_IS_H8300 @@ -807,7 +808,7 @@ gbyte () void fetch_regs_from_dump (nextchar, want) - int (*nextchar)(); + int (*nextchar) (); char *want; { int regno; @@ -821,9 +822,9 @@ fetch_regs_from_dump (nextchar, want) { case '\n': /* Skip to end of line and then eat all new line type stuff */ - while (thischar != '\n' && thischar != '\r') + while (thischar != '\n' && thischar != '\r') thischar = nextchar (); - while (thischar == '\n' || thischar == '\r') + while (thischar == '\n' || thischar == '\r') thischar = nextchar (); want++; break; @@ -836,24 +837,25 @@ fetch_regs_from_dump (nextchar, want) thischar = nextchar (); want++; break; - + default: if (*want == thischar) { want++; if (*want) thischar = nextchar (); - + } else if (thischar == ' ' || thischar == '\n' || thischar == '\r') { thischar = nextchar (); } - else { - error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>", - want, thischar, thischar); - } - + else + { + error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>", + want, thischar, thischar); + } + break; case '%': /* Got a register command */ @@ -886,25 +888,25 @@ fetch_regs_from_dump (nextchar, want) #endif default: - if (isdigit (want[0])) + if (isdigit (want[0])) { if (isdigit (want[1])) { regno = (want[0] - '0') * 10 + want[1] - '0'; want += 2; } - else + else { regno = want[0] - '0'; want++; } } - + else abort (); } store_signed_integer (buf, - REGISTER_RAW_SIZE(regno), + REGISTER_RAW_SIZE (regno), (LONGEST) get_hex (&thischar, nextchar)); supply_register (regno, buf); break; @@ -1119,17 +1121,17 @@ write_small (memaddr, myaddr, len) /* Write a large ammount of memory, this only works with the serial mode enabled. Command is sent as - il ;s:s\r -> - <- il ;s:s\r - <- ENQ - ACK -> - <- LO s\r - Srecords... - ^Z -> - <- ENQ - ACK -> - <- : - */ + il ;s:s\r -> + <- il ;s:s\r + <- ENQ + ACK -> + <- LO s\r + Srecords... + ^Z -> + <- ENQ + ACK -> + <- : + */ static int write_large (memaddr, myaddr, len) @@ -1205,9 +1207,9 @@ write_large (memaddr, myaddr, len) else { printf_unfiltered ("@%d}@", j); - while ((j = readchar (0)) > 0) + while ((j = readchar (0)) > 0) { - printf_unfiltered ("@{%d}@",j); + printf_unfiltered ("@{%d}@", j); } } } @@ -1243,10 +1245,10 @@ e7000_write_inferior_memory (memaddr, myaddr, len) /* Read LEN bytes from inferior memory at MEMADDR. Put the result at debugger address MYADDR. Returns length moved. - Small transactions we send - m <addr>;l - and receive - 00000000 12345678 ? + Small transactions we send + m <addr>;l + and receive + 00000000 12345678 ? */ static int @@ -1261,7 +1263,7 @@ e7000_read_inferior_memory (memaddr, myaddr, len) char buf[200]; /* Starting address of this pass. */ -/* printf("READ INF %x %x %d\n", memaddr, myaddr, len);*/ +/* printf("READ INF %x %x %d\n", memaddr, myaddr, len); */ if (((memaddr - 1) + len) < memaddr) { errno = EIO; @@ -1271,64 +1273,65 @@ e7000_read_inferior_memory (memaddr, myaddr, len) sprintf (buf, "m %x;l\r", memaddr); puts_e7000debug (buf); - for (count = 0; count < len; count += 4) + for (count = 0; count < len; count += 4) { /* Suck away the address */ - c = gch (); + c = gch (); while (c != ' ') - c = gch (); + c = gch (); c = gch (); - if (c == '*') + if (c == '*') { /* Some kind of error */ - puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */ - expect_full_prompt(); + puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */ + expect_full_prompt (); return -1; } while (c != ' ') - c = gch (); + c = gch (); /* Now read in the data */ - for (i = 0; i < 4; i++) + for (i = 0; i < 4; i++) { - int b = gbyte(); - if (count + i < len) { - myaddr[count + i] = b; - } + int b = gbyte (); + if (count + i < len) + { + myaddr[count + i] = b; + } } /* Skip the trailing ? and send a . to end and a cr for more */ - gch (); + gch (); gch (); if (count + 4 >= len) - puts_e7000debug(".\r"); + puts_e7000debug (".\r"); else - puts_e7000debug("\r"); + puts_e7000debug ("\r"); } - expect_prompt(); + expect_prompt (); return len; } /* - For large transfers we used to send + For large transfers we used to send - d <addr> <endaddr>\r + d <addr> <endaddr>\r - and receive + and receive <ADDRESS> < D A T A > < ASCII CODE > 00000000 5F FD FD FF DF 7F DF FF 01 00 01 00 02 00 08 04 "_..............." 00000010 FF D7 FF 7F D7 F1 7F FF 00 05 00 00 08 00 40 00 "..............@." 00000020 7F FD FF F7 7F FF FF F7 00 00 00 00 00 00 00 00 "................" - A cost in chars for each transaction of 80 + 5*n-bytes. + A cost in chars for each transaction of 80 + 5*n-bytes. - Large transactions could be done with the srecord load code, but - there is a pause for a second before dumping starts, which slows the - average rate down! -*/ + Large transactions could be done with the srecord load code, but + there is a pause for a second before dumping starts, which slows the + average rate down! + */ static int e7000_read_inferior_memory_large (memaddr, myaddr, len) @@ -1353,12 +1356,12 @@ e7000_read_inferior_memory_large (memaddr, myaddr, len) count = 0; c = gch (); - + /* skip down to the first ">" */ - while( c != '>' ) + while (c != '>') c = gch (); /* now skip to the end of that line */ - while( c != '\r' ) + while (c != '\r') c = gch (); c = gch (); @@ -1382,7 +1385,7 @@ e7000_read_inferior_memory_large (memaddr, myaddr, len) } } /* throw out the rest of the line */ - while( c != '\r' ) + while (c != '\r') c = gch (); } @@ -1494,12 +1497,11 @@ e7000_xfer_inferior_memory (memaddr, myaddr, len, write, target) struct target_ops *target; /* ignored */ { if (write) - return e7000_write_inferior_memory( memaddr, myaddr, len); - else - if( len < 16 ) - return e7000_read_inferior_memory( memaddr, myaddr, len); - else - return e7000_read_inferior_memory_large( memaddr, myaddr, len); + return e7000_write_inferior_memory (memaddr, myaddr, len); + else if (len < 16) + return e7000_read_inferior_memory (memaddr, myaddr, len); + else + return e7000_read_inferior_memory_large (memaddr, myaddr, len); } static void @@ -1519,13 +1521,13 @@ e7000_load (args, from_tty) bfd *pbfd; bfd_vma entry; #define WRITESIZE 0x1000 - char buf[2 + 4 + 4 + WRITESIZE]; /* `DT' + <addr> + <len> + <data> */ + char buf[2 + 4 + 4 + WRITESIZE]; /* `DT' + <addr> + <len> + <data> */ char *filename; int quiet; int nostart; time_t start_time, end_time; /* Start and end times of download */ unsigned long data_count; /* Number of bytes transferred to memory */ - int oldtimeout = timeout; + int oldtimeout = timeout; timeout = remote_timeout; @@ -1548,11 +1550,13 @@ e7000_load (args, from_tty) { char *arg; - while (isspace (*args)) args++; + while (isspace (*args)) + args++; arg = args; - while ((*args != '\000') && !isspace (*args)) args++; + while ((*args != '\000') && !isspace (*args)) + args++; if (*args != '\000') *args++ = '\000'; @@ -1578,7 +1582,7 @@ e7000_load (args, from_tty) } old_chain = make_cleanup ((make_cleanup_func) bfd_close, pbfd); - if (!bfd_check_format (pbfd, bfd_object)) + if (!bfd_check_format (pbfd, bfd_object)) error ("\"%s\" is not an object file: %s", filename, bfd_errmsg (bfd_get_error ())); @@ -1589,7 +1593,7 @@ e7000_load (args, from_tty) expect ("\nOK"); - for (section = pbfd->sections; section; section = section->next) + for (section = pbfd->sections; section; section = section->next) { if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) { @@ -1607,7 +1611,7 @@ e7000_load (args, from_tty) section_size); fptr = 0; - + data_count += section_size; while (section_size > 0) @@ -1635,7 +1639,7 @@ e7000_load (args, from_tty) if (SERIAL_WRITE (e7000_desc, buf, count + 10)) fprintf_unfiltered (gdb_stderr, "e7000_load: SERIAL_WRITE failed: %s\n", - safe_strerror(errno)); + safe_strerror (errno)); expect ("OK"); @@ -1680,7 +1684,7 @@ e7000_load (args, from_tty) if (!quiet) printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry); -/* start_routine (entry);*/ +/* start_routine (entry); */ } report_transfer_performance (data_count, start_time, end_time); @@ -1712,7 +1716,8 @@ e7000_mourn_inferior () /* Since we can change to soft breakpoints dynamically, we must define more than enough. Was breakaddr[MAX_E7000DEBUG_BREAKPOINTS]. */ -static CORE_ADDR breakaddr[MAX_BREAKPOINTS] = {0}; +static CORE_ADDR breakaddr[MAX_BREAKPOINTS] = +{0}; static int e7000_insert_breakpoint (addr, shadow) @@ -1731,12 +1736,12 @@ e7000_insert_breakpoint (addr, shadow) breakaddr[i] = addr; /* Save old contents, and insert a nop in the space */ #ifdef HARD_BREAKPOINTS - if (BC_BREAKPOINTS) + if (BC_BREAKPOINTS) { - sprintf (buf, "BC%d A=%x\r", i+1, addr); + sprintf (buf, "BC%d A=%x\r", i + 1, addr); puts_e7000debug (buf); } - else + else { sprintf (buf, "B %x\r", addr); puts_e7000debug (buf); @@ -1772,14 +1777,14 @@ e7000_remove_breakpoint (addr, shadow) { breakaddr[i] = 0; #ifdef HARD_BREAKPOINTS - if (BC_BREAKPOINTS) + if (BC_BREAKPOINTS) { - sprintf (buf, "BC%d - \r", i+1); + sprintf (buf, "BC%d - \r", i + 1); puts_e7000debug (buf); } - else + else { - sprintf (buf, "B - %x\r", addr); + sprintf (buf, "B - %x\r", addr); puts_e7000debug (buf); } expect_prompt (); @@ -1846,14 +1851,14 @@ e7000_drain_command (args, fromtty) { int c; - puts_e7000debug("end\r"); + puts_e7000debug ("end\r"); putchar_e7000 (CTRLC); while ((c = readchar (1) != -1)) { if (quit_flag) { - putchar_e7000(CTRLC); + putchar_e7000 (CTRLC); quit_flag = 0; } if (c > ' ' && c < 127) @@ -1868,7 +1873,8 @@ e7000_drain_command (args, fromtty) static int why_stop () { - static char *strings[NITEMS] = { + static char *strings[NITEMS] = + { "STEP NORMAL", "BREAK POINT", "BREAK KEY", @@ -1883,17 +1889,17 @@ why_stop () for (i = 0; i < NITEMS; ++i) p[i] = strings[i]; - + c = gch (); while (1) { for (i = 0; i < NITEMS; i++) { - if (c == *(p[i])) + if (c == *(p[i])) { p[i]++; - if (*(p[i]) == 0) - { + if (*(p[i]) == 0) + { /* found one of the choices */ return i; } @@ -1911,16 +1917,16 @@ why_stop () int expect_n (strings) -char **strings; + char **strings; { char *(ptr[10]); - int n; + int n; int c; char saveaway[100]; char *buffer = saveaway; /* Count number of expect strings */ - for (n = 0; strings[n]; n++) + for (n = 0; strings[n]; n++) { ptr[n] = strings[n]; } @@ -1938,7 +1944,7 @@ char **strings; #ifdef __GO32__ if (kbhit ()) { - int k = getkey(); + int k = getkey (); if (k == 1) quit_flag = 1; @@ -1952,7 +1958,7 @@ char **strings; for (i = 0; i < n; i++) { - if (c == ptr[i][0]) + if (c == ptr[i][0]) { ptr[i]++; if (ptr[i][0] == 0) @@ -1967,15 +1973,15 @@ char **strings; ptr[i] = strings[i]; } } - + if (gotone) { /* Save it up incase we find that there was no match */ - *buffer ++ = c; + *buffer++ = c; } else { - if (buffer != saveaway) + if (buffer != saveaway) { *buffer++ = 0; printf_unfiltered ("%s", buffer); @@ -2001,8 +2007,8 @@ sub2_from_pc () char buf2[200]; store_signed_integer (buf, - REGISTER_RAW_SIZE(PC_REGNUM), - read_register (PC_REGNUM) -2); + REGISTER_RAW_SIZE (PC_REGNUM), + read_register (PC_REGNUM) - 2); supply_register (PC_REGNUM, buf); sprintf (buf2, ".PC %x\r", read_register (PC_REGNUM)); puts_e7000debug (buf2); @@ -2013,7 +2019,8 @@ sub2_from_pc () #define WAS_RUNNING 2 #define WAS_OTHER 3 -static char *estrings[] = { +static char *estrings[] = +{ "** SLEEP", "BREAK !", "** PC", @@ -2043,7 +2050,7 @@ e7000_wait (pid, status) while (loop) { switch (expect_n (estrings)) - { + { case WAS_OTHER: /* how did this happen ? */ loop = 0; @@ -2107,38 +2114,38 @@ e7000_wait (pid, status) switch (stop_reason) { case 1: /* Breakpoint */ - write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */ - status->value.sig = TARGET_SIGNAL_TRAP; + write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */ + status->value.sig = TARGET_SIGNAL_TRAP; break; case 0: /* Single step */ - status->value.sig = TARGET_SIGNAL_TRAP; + status->value.sig = TARGET_SIGNAL_TRAP; break; case 2: /* Interrupt */ if (had_sleep) { - status->value.sig = TARGET_SIGNAL_TRAP; + status->value.sig = TARGET_SIGNAL_TRAP; sub2_from_pc (); } else { - status->value.sig = TARGET_SIGNAL_INT; + status->value.sig = TARGET_SIGNAL_INT; } break; case 3: break; case 4: printf_unfiltered ("a cycle address error?\n"); - status->value.sig = TARGET_SIGNAL_UNKNOWN; + status->value.sig = TARGET_SIGNAL_UNKNOWN; break; case 5: - status->value.sig = TARGET_SIGNAL_ILL; + status->value.sig = TARGET_SIGNAL_ILL; break; case 6: - status->value.sig = TARGET_SIGNAL_SEGV; + status->value.sig = TARGET_SIGNAL_SEGV; break; case 7: /* Anything else (NITEMS + 1) */ printf_unfiltered ("a write protect error?\n"); - status->value.sig = TARGET_SIGNAL_UNKNOWN; + status->value.sig = TARGET_SIGNAL_UNKNOWN; break; default: /* Get the user's attention - this should never happen. */ @@ -2151,7 +2158,7 @@ e7000_wait (pid, status) /* Stop the running program. */ static void -e7000_stop () +e7000_stop () { /* Sending a ^C is supposed to stop the running program. */ putchar_e7000 (CTRLC); @@ -2159,86 +2166,86 @@ e7000_stop () /* Define the target subroutine names. */ -struct target_ops e7000_ops ; +struct target_ops e7000_ops; -static void -init_e7000_ops(void) +static void +init_e7000_ops (void) { - e7000_ops.to_shortname = "e7000"; - e7000_ops.to_longname = "Remote Hitachi e7000 target"; - e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\ + e7000_ops.to_shortname = "e7000"; + e7000_ops.to_longname = "Remote Hitachi e7000 target"; + e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\ or a network connection.\n\ Arguments are the name of the device for the serial line,\n\ the speed to connect at in bits per second.\n\ eg\n\ target e7000 /dev/ttya 9600\n\ -target e7000 foobar" ; - e7000_ops.to_open = e7000_open; - e7000_ops.to_close = e7000_close; - e7000_ops.to_attach = 0; +target e7000 foobar"; + e7000_ops.to_open = e7000_open; + e7000_ops.to_close = e7000_close; + e7000_ops.to_attach = 0; e7000_ops.to_post_attach = NULL; - e7000_ops.to_require_attach = NULL; - e7000_ops.to_detach = e7000_detach; - e7000_ops.to_require_detach = NULL; - e7000_ops.to_resume = e7000_resume; - e7000_ops.to_wait = e7000_wait; - e7000_ops.to_post_wait = NULL; - e7000_ops.to_fetch_registers = e7000_fetch_register; - e7000_ops.to_store_registers = e7000_store_register; - e7000_ops.to_prepare_to_store = e7000_prepare_to_store; - e7000_ops.to_xfer_memory = e7000_xfer_inferior_memory; - e7000_ops.to_files_info = e7000_files_info; - e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint; - e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint; - e7000_ops.to_terminal_init = 0; - e7000_ops.to_terminal_inferior = 0; - e7000_ops.to_terminal_ours_for_output = 0; - e7000_ops.to_terminal_ours = 0; - e7000_ops.to_terminal_info = 0; - e7000_ops.to_kill = e7000_kill; - e7000_ops.to_load = e7000_load; - e7000_ops.to_lookup_symbol = 0; - e7000_ops.to_create_inferior = e7000_create_inferior; + e7000_ops.to_require_attach = NULL; + e7000_ops.to_detach = e7000_detach; + e7000_ops.to_require_detach = NULL; + e7000_ops.to_resume = e7000_resume; + e7000_ops.to_wait = e7000_wait; + e7000_ops.to_post_wait = NULL; + e7000_ops.to_fetch_registers = e7000_fetch_register; + e7000_ops.to_store_registers = e7000_store_register; + e7000_ops.to_prepare_to_store = e7000_prepare_to_store; + e7000_ops.to_xfer_memory = e7000_xfer_inferior_memory; + e7000_ops.to_files_info = e7000_files_info; + e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint; + e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint; + e7000_ops.to_terminal_init = 0; + e7000_ops.to_terminal_inferior = 0; + e7000_ops.to_terminal_ours_for_output = 0; + e7000_ops.to_terminal_ours = 0; + e7000_ops.to_terminal_info = 0; + e7000_ops.to_kill = e7000_kill; + e7000_ops.to_load = e7000_load; + e7000_ops.to_lookup_symbol = 0; + e7000_ops.to_create_inferior = e7000_create_inferior; e7000_ops.to_post_startup_inferior = NULL; e7000_ops.to_acknowledge_created_inferior = NULL; - e7000_ops.to_clone_and_follow_inferior = NULL; - e7000_ops.to_post_follow_inferior_by_clone = NULL; + e7000_ops.to_clone_and_follow_inferior = NULL; + e7000_ops.to_post_follow_inferior_by_clone = NULL; e7000_ops.to_insert_fork_catchpoint = NULL; e7000_ops.to_remove_fork_catchpoint = NULL; e7000_ops.to_insert_vfork_catchpoint = NULL; - e7000_ops.to_remove_vfork_catchpoint = NULL; + e7000_ops.to_remove_vfork_catchpoint = NULL; e7000_ops.to_has_forked = NULL; e7000_ops.to_has_vforked = NULL; - e7000_ops.to_can_follow_vfork_prior_to_exec = NULL; + e7000_ops.to_can_follow_vfork_prior_to_exec = NULL; e7000_ops.to_post_follow_vfork = NULL; e7000_ops.to_insert_exec_catchpoint = NULL; e7000_ops.to_remove_exec_catchpoint = NULL; e7000_ops.to_has_execd = NULL; e7000_ops.to_reported_exec_events_per_exec_call = NULL; e7000_ops.to_has_exited = NULL; - e7000_ops.to_mourn_inferior = e7000_mourn_inferior; - e7000_ops.to_can_run = 0; - e7000_ops.to_notice_signals = 0; - e7000_ops.to_thread_alive = 0; - e7000_ops.to_stop = e7000_stop; - e7000_ops.to_pid_to_exec_file = NULL; + e7000_ops.to_mourn_inferior = e7000_mourn_inferior; + e7000_ops.to_can_run = 0; + e7000_ops.to_notice_signals = 0; + e7000_ops.to_thread_alive = 0; + e7000_ops.to_stop = e7000_stop; + e7000_ops.to_pid_to_exec_file = NULL; e7000_ops.to_core_file_to_sym_file = NULL; - e7000_ops.to_stratum = process_stratum; - e7000_ops.DONT_USE = 0; - e7000_ops.to_has_all_memory = 1; - e7000_ops.to_has_memory = 1; - e7000_ops.to_has_stack = 1; - e7000_ops.to_has_registers = 1; - e7000_ops.to_has_execution = 1; - e7000_ops.to_sections = 0; - e7000_ops.to_sections_end = 0; - e7000_ops.to_magic = OPS_MAGIC; + e7000_ops.to_stratum = process_stratum; + e7000_ops.DONT_USE = 0; + e7000_ops.to_has_all_memory = 1; + e7000_ops.to_has_memory = 1; + e7000_ops.to_has_stack = 1; + e7000_ops.to_has_registers = 1; + e7000_ops.to_has_execution = 1; + e7000_ops.to_sections = 0; + e7000_ops.to_sections_end = 0; + e7000_ops.to_magic = OPS_MAGIC; }; void _initialize_remote_e7000 () { - init_e7000_ops() ; + init_e7000_ops (); add_target (&e7000_ops); add_com ("e7000", class_obscure, e7000_command, @@ -2254,7 +2261,7 @@ _initialize_remote_e7000 () "Drain pending e7000 text buffers."); add_show_from_set (add_set_cmd ("usehardbreakpoints", no_class, - var_integer, (char *)&use_hard_breakpoints, - "Set use of hardware breakpoints for all breakpoints.\n", &setlist), + var_integer, (char *) &use_hard_breakpoints, + "Set use of hardware breakpoints for all breakpoints.\n", &setlist), &showlist); } |