diff options
Diffstat (limited to 'gdb/testsuite/gdb.base/setshow.exp')
| -rw-r--r-- | gdb/testsuite/gdb.base/setshow.exp | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/gdb/testsuite/gdb.base/setshow.exp b/gdb/testsuite/gdb.base/setshow.exp new file mode 100644 index 00000000000..37c2f84034c --- /dev/null +++ b/gdb/testsuite/gdb.base/setshow.exp @@ -0,0 +1,243 @@ +# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# Please email any bugs, comments, and/or additions to this file to: +# bug-gdb@prep.ai.mit.edu + +# This file was written by Michael Snyder (msnyder@cygnus.com) + +if $tracelevel then { + strace $tracelevel +} + +set prms_id 0 +set bug_id 0 + +set testfile "setshow" +set srcfile ${srcdir}/${subdir}/${testfile}.c +set binfile ${objdir}/${subdir}/${testfile} +if { [gdb_compile ${srcfile} ${binfile} executable {debug}] != "" } { + gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." +} + +# Start with a fresh gdb + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load ${binfile} + +# make sure $pc is sane, in case we're talking to a board. +if { ![runto_main] } { + gdb_suppress_tests; +} + +# +# Test gdb set and show commands. +# Add tests here for show and set that don't fit neatly elsewhere. +# FIXME: many rudimentary tests for set and show commands have been +# added below, but most do nothing more than check that a +# variable has been set successfully, ie. they do not test +# whether setting the variable has had the desired effect. +# + +#test default annotation_level is 0 +gdb_test "show annotate" "Annotation_level is 0..*" "default annotation_level is zero" + +#test set annotate 2 +send_gdb "set annotate 2\n" +gdb_expect { + -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ + { pass "set annotate 2" } + -re ".*$gdb_prompt $" { fail "set annotate 2" } + timeout { fail "(timeout) set annotate 2" } + } + +send_gdb "show annotate\n" +gdb_expect { + -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ + { pass "show annotate (2)" } + -re ".*$gdb_prompt $" { fail "show annotate (2)" } + timeout { fail "(timeout) show annotate (2)" } + } + +#test annotation_level 2 +send_gdb "info line 1\n" +gdb_expect { + -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \ + { pass "annotation_level 2" } + -re ".*$gdb_prompt $" { fail "annotation_level 2" } + timeout { fail "(timeout) annotation_level 2" } + } + +#test set annotate 1 +gdb_test "set annotate 1" ".*post-prompt.*" "set annotate 1" +gdb_test "show annotate" "Annotation_level is 1..*" "show annotate (1)" +#test annotation_level 1 +gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1" +#test set annotate 0 +gdb_test "set annotate 0" "" "set annotate 0" +gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)" +#test annotation_level 0 +gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0" +#test set args +gdb_test "set args foo bar blup baz bubble" "" "set args" +#test show args +gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args" + +# Don't test if we can't pass args or if we're using a stub. +if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } { + #test passing args + gdb_test "cont" "Continuing.*" "continuing" + delete_breakpoints + gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args" +} +#test set check range on +gdb_test "set check range on" "" "set check range on" +#test show check range on +gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" +#test set check range auto +gdb_test "set check range auto" "" "set check range auto" +#test show check range auto +gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" +#test set check type on +gdb_test "set check type on" "" "set check type on" +#test show check type on +gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" +#test set check type auto +gdb_test "set check type auto" "" "set check type auto" +#test show check type +gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" +#test set complaints 100 +gdb_test "set complaints 100" "" "set complaints 100" +#test show complaints 100 +gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" +#test set complaints 0 +gdb_test "set complaints 0" "" "set complaints 0" +#test show complaints 0 +gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" +#test set confirm off +gdb_test "set confirm off" "" "set confirm off" +#test show confirm off +gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" +#test set confirm on +gdb_test "set confirm on" "" "set confirm on" +#test show confirm on +gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" +#test set editing off +gdb_test "set editing off" "" "set editing off" +#test show editing off +gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" +#test set editing on +#gdb_test "set editing on" "" "set editing on" +#test show editing on +#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" +#test set environment FOOBARBAZ +gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" "" "set environment FOOBARBAZ" +#test show environment FOOBARBAZ +gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ" +#test set height 100 +gdb_test "set height 100" "" "set height 100" +#test show height 100 +gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" +#test set history expansion on +gdb_test "set history expansion on" "" "set history expansion on" +#test show history expansion on +gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" +#test set history filename foobar.baz +gdb_test "set history filename foobar.baz" "" "set history filename foobar.baz" +#test show history filename foobar.baz +gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)" +#test set history save on +gdb_test "set history save on" "" "set history save on" +#test show history save on +gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)" +#test set history size 100 +gdb_test "set history size 100" "" "set history size 100" +#test show history size 100 +gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" +#test set language asm +gdb_test "set language asm" "" "set language asm" +#test show language asm +gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" +#test set language auto +gdb_test "set language auto" "" "set language auto" +#test show language +gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" +#test set listsize 100 +gdb_test "set listsize 100" "" "set listsize 100" +#test show listsize 100 +gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" + +if ![board_info target exists gdb_prompt] { + #test set prompt (FooBarBaz) + set newprompt "\\(FooBarBaz\\)" + send_gdb "set prompt (FooBarBaz) \n" + gdb_expect { + -re "$newprompt $" { pass "set prompt (FooBarBaz) " } + timeout { fail "(timeout) set prompt (FooBarBaz) " } + } + + #test show prompt (FooBarBaz) + send_gdb "show prompt\n" + gdb_expect { + -re "Gdb's prompt is \"$newprompt \"..* $" \ + { pass "show prompt (FooBarBaz) " } + timeout { fail "(timeout) show prompt (FooBarBaz) " } + } + + #test set prompt (gdb) + send_gdb "set prompt (gdb) \n" + gdb_expect { + -re "$gdb_prompt $" { pass "set prompt (gdb) " } + timeout { fail "(timeout) set prompt (gdb) " } + } +} + +#test set radix 11 +gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*" "set radix 11" +#test set radix 16 +gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*" "set radix 16" +#test show radix 16 +gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*" "show radix (16)" +#test set radix 10 +gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*" "set radix 10" +#test show radix 10 +gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" +#test set width 90 +gdb_test "set width 90" "" "set width 90" +#test show width 90 +gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" +#test set write on +# This is only supported on targets which use exec.o. +gdb_test "set write on" "" "set write on" +#test show write on +# This is only supported on targets which use exec.o. +gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" +#test set symbol-reloading on +gdb_test "set symbol-reloading on" "" "set symbol-reloading on" +#test show symbol-reloading on +gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" +#test show user +gdb_test "show user" "" "show user" +#test set verbose on +gdb_test "set verbose on" "" "set verbose on" +#test show verbose on +gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" +#test set verbose off +gdb_test "set verbose off" "" "set verbose off" +#test show verbose off +gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" |