diff options
Diffstat (limited to 'itcl/iwidgets/doc/messagebox.n')
| -rw-r--r-- | itcl/iwidgets/doc/messagebox.n | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/itcl/iwidgets/doc/messagebox.n b/itcl/iwidgets/doc/messagebox.n new file mode 100644 index 00000000000..829910890de --- /dev/null +++ b/itcl/iwidgets/doc/messagebox.n @@ -0,0 +1,277 @@ +'\" +'\" Copyright (c) 1995 DSC Technologies Corporation +'\" +'\" See the file "license.terms" for information on usage and redistribution +'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. +'\" +'\" @(#) messagebox.n 1.21 94/12/17 16:04:44 +'\" +.so man.macros +.HS iwidgets::messagebox iwid +.BS +'\" Note: do not modify the .SH NAME line immediately below! +.SH NAME +iwidgets::messagebox \- Create and manipulate a messagebox text widget +.SH SYNOPSIS +\fBiwidgets::messagebox\fI \fIpathName \fR?\fIoptions\fR? +.SH "INHERITANCE" +itk::Widget <- iwidgets::Labeledwidget <- iwidgets::Scrolledwidget <- iwidgets::Messagebox +.SH "STANDARD OPTIONS" +.LP +.nf +.ta 4c 8c 12c +\fB +activeBackground activeForeground background borderWidth +cursor exportSelection font foreground +highlightColor highlightThickness padX padY +relief setGrid\fR +.fi +.LP +See the "options" manual entry for details on the standard options. +.SH "ASSOCIATED OPTIONS" +.LP +.nf +.ta 4c 8c 12c +\fBlabelBitmap\fR \fBlabelFont\fR \fBlabelImage\fR \fBlabelMargin\fR +\fBlabelPos\fR \fBlabelText\fR \fBlabelVariable\fR +.fi +.LP +See the "labeledwidget" class manual entry for details on the above +associated options. +.LP +.nf +.ta 4c 8c 12c +\fBactiveRelief\fR \fBelementBorderWidth\fR \fBjump\fR \fBtroughColor\fR +.fi +.LP +See the "scrollbar" widget manual entry for details on the above +associated options. +.LP +.nf +.ta 4c 8c 12c +\fBheight\fR \fBhscrollMode\fR \fBsbWidth\fR \fBscrollMargin\fR +\fBtextBackground\fR \fBvisibleItems\fR \fBvscrollMode\fR \fBwidth\fR +.fi +.LP +See the "scrolledtext" widget manual entry for details on the above +associated options. +.LP +.nf +.ta 4c 8c 12c +\fBspacing1\fR \fBspacing2\fR \fBspacing3\fR +.fi +.LP +See the "text" widget manual entry for details on the above +associated options. + +.SH "WIDGET-SPECIFIC OPTIONS" +.LP +.nf +Name: \fBfileName\fR +Class: \fBFileName\fR +Command-Line Switch: \fB-filename\fR +.fi +.IP +Specifies the filename to be displayed in the file selection dialog when +it pops up during a save of the messagebox contents operation. +.LP +.nf +Name: \fBmaxLines\fR +Class: \fBMaxLines\fR +Command-Line Switch: \fB-maxlines\fR +.fi +.IP +Specifies the maximum number of lines allowed in the text area of the +messagebox. When this limit is reached, the oldest line will be deleted +such that the total number of lines remains \fImaxlines\fR. +.LP +.nf +Name: \fBsaveDir\fR +Class: \fBSaveDir\fR +Command-Line Switch: \fB-savedir\fR +.fi +.IP +Specifies the default directory to display when the file selection dialog +pops up during a save of the messagebox contents operation. If this +parameter is not specified, then the files in the current working directory +are displayed. +.LP +.BE + +.SH DESCRIPTION +.PP +The \fBiwidgets::messagebox\fR command creates +a scrolled information messages area widget. +Message types can be user defined and configured. Their options +include foreground, background, font, bell, and their display +mode of on or off. This allows message types to defined as needed, +removed when no longer so, and modified when necessary. An export +method is provided for file I/O. + +.PP +The number of lines displayed may be limited with +the default being 1000. When this limit is reached, the oldest line +is removed. A popup menu which appears when the right mouse button +has been pressed in the message area has been predefined. The contents +of the popup menu by default support clearing the area and saving its +contents to a file. Additional operations may be defined or existing +operations removed by using the component command to access the +popup menu. + +.SH "MESSAGE TYPES" +.PP +The display characteristics of messages issued to the messagebox vary +with the message type. Types are defined by the user and they may +be added, removed, and configured. The options of the message type +control the display include the following: +.TP +\fB\-background \fIcolor\fR +\fIColor\fR specifies the background color to use for characters +associated with the message type. +It may have any of the forms accepted by \fBTk_GetColor\fR. +.TP +\fB\-bell \fIboolean\fR +Specifies whether or not to ring the bell whenenver a message of this +type is issued. \fIBoolean\fR may have any of the forms accepted by +\fBTk_GetBoolean\fR. The default is 0. +.TP +\fB-font\ \fIfontName\fR +\fIFontName\fR is the name of a font to use for drawing +characters. It may have any of the forms accepted +by Tk_GetFontStruct. +.TP +\fB\-foreground \fIcolor\fR +\fIColor\fR specifies the foreground color to use for characters +associated with the message type. +It may have any of the forms accepted by \fBTk_GetColor\fR. +.TP +\fB\-show \fIboolean\fR +Specifies whether of not to display this message type when issued. +\fIBoolean\fR may have any of the forms accepted by +\fBTk_GetBoolean\fR. The default is 1. + +.SH "METHODS" +.PP +The \fBiwidgets::messagebox\fR command creates a new Tcl command whose +name is \fIpathName\fR. This +command may be used to invoke various +operations on the widget. It has the following general form: +.DS C +\fIpathName option \fR?\fIarg arg ...\fR? +.DE +\fIOption\fR and the \fIarg\fRs +determine the exact behavior of the command. The following +commands are possible for messagebox widgets: + +.SH "WIDGET-SPECIFIC METHODS" +.TP +\fIpathName \fBcget\fR \fIoption\fR +Returns the current value of the configuration option given +by \fIoption\fR. +\fIOption\fR may have any of the values accepted by the \fBiwidgets::messagebox\fR +command. +.TP +\fIpathName \fBclear\fR +Clear the messagebox of all messages. +.TP +\fIpathName \fBexport\fR \fIfilename\fR +Write text to a file. If \fIfilename\fR exists then +contents are replaced with text widget contents. +.TP +\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR? +Query or modify the configuration options of the widget. +If no \fIoption\fR is specified, returns a list describing all of +the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for +information on the format of this list). If \fIoption\fR is specified +with no \fIvalue\fR, then the command returns a list describing the +one named option (this list will be identical to the corresponding +sublist of the value returned if no \fIoption\fR is specified). If +one or more \fIoption\-value\fR pairs are specified, then the command +modifies the given widget option(s) to have the given value(s); in +this case the command returns an empty string. +\fIOption\fR may have any of the values accepted by the \fBiwidgets::messagebox\fR +command. +.TP +\fIpathName \fBtype\fR \fIoption\fR \fImsgtype\fR ?\fIarg arg ...\fR? +This command is used to manipulate message types. The behavior of +the command depends on the option argument that follows the type keyword. +The following forms of the command are supported: +.RS +.TP +.TP +\fIpathName \fBtype add\fR \fImsgtype\fR ?\fIoption value ...\fR? +Adds a new message type given by \fImsgtype\fR with the display +properties defined by the option value pairs. +See MESSAGE TYPES for information on the options that +are supported. +.TP +\fIpathName \fBtype cget\fR \fImsgtype option\fR +Returns the value of a configuration option for a message type. +\fIMsgtype\fR identifies the message type, and \fIoption\fR +specifies a particular configuration option, which must be one of +the ones listed in the section MESSAGE TYPES. +.TP +\fIpathName \fBtype configure \fImsgtype\fR ?\fIoption value ...\fR? +Query or modify the configuration options for a message type. +If no \fIoption\fR is specified, returns a list describing all of +the available options for the message type \fImsgtype\fR. +If \fIoption\fR is specified with no \fIvalue\fR, then the command +returns a list describing the one named option. +If one or more \fIoption\-value\fR pairs are specified, then the command +modifies the given option(s) to have the given value(s); in +this case the command returns an empty string. +See MESSAGE TYPES for information on the options that +are supported. +\fIpathName \fBtype remove\fR \fImsgtype\fR +Removes an existing message type given by \fImsgtype\fR. +.RE +.TP +\fIpathName \fBissue\fR \fIstring\fR \fI?level?\fR \fI?tags?\fR +Print a \fIstring\fR to the text area at the given level and with +any additional tags specified. + +.SH "COMPONENTS" +.LP +.nf +Name: \fBitemMenu\fR +Class: \fBMenu\fR +.fi +.IP +This is the popup menu that gets displayed when you right-click in the +text area of the messagebox. Its contents may be modified via the component +command. +.LP +.nf +Name: \fBtext\fR +Class: \fBScrolledtext\fR +.fi +.IP +The text component is the scrolledtext widget. See the "scrolledtext" widget +manual entry for details on the text component item. +.fi + +.SH EXAMPLE +.DS + package require Iwidgets 4.0 + iwidgets::messagebox .mb -hscrollmode dynamic \\ + -labeltext "Messages" -labelpos n \\ + -height 120 -width 550 -savedir "/tmp" -textbackground #d9d9d9 + + pack .mb -padx 5 -pady 5 -fill both -expand yes + + .mb type add ERROR -background red -foreground white -bell 1 + .mb type add WARNING -background yellow -foreground black + .mb type add INFO -background white -foreground black + + .mb issue "This is an error message in red with a beep" ERROR + .mb issue "This warning message in yellow" WARNING + .mb issue "This is an informational message" INFO +.DE +.SH AUTHOR +Alfredo Jahn V +.DE +Mark L. Ulferts +.LP +.SH KEYWORDS +messagebox, scrolledtext, text, widget + |