diff options
Diffstat (limited to 'readline')
84 files changed, 38636 insertions, 0 deletions
diff --git a/readline/CHANGELOG b/readline/CHANGELOG new file mode 100644 index 00000000000..8094590945c --- /dev/null +++ b/readline/CHANGELOG @@ -0,0 +1,77 @@ +[Readline-specific changelog. Descriptions of changes to the source are + found in the bash changelog.] + + 6/9 + --- +Makefile.in + - quote value of ${INSTALL_DATA} when passing it to makes in + subdirectories + + 7/1 + --- +Makefile.in + - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let + autoconf set the value itself in the Makefile + - removed a stray `-' before $(RANLIB) in the `install' recipe + +doc/Makefile.in + - add a VPATH assignment so the documentation is not remade if it's + already up-to-date in the distribution + +configure.in + - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains + @LOCAL_LDFLAGS@ + + 7/9 + --- + +config.h.in + - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and + STRUCT_WINSIZE_IN_TERMIOS + +configure.in + - call BASH_STRUCT_WINSIZE to look for the definition of + `struct winsize' + + 7/17 + ---- +configure.in + - call AC_MINIX + +config.h.in + - add define line for AC_MINIX + + 7/18 + ---- +Makefile.in + - add `install-shared' and `uninstall-shared' targets + + 8/4 + --- +Makefile.in + - install and uninstall libhistory.a in the `install' and + `uninstall' targets + + 9/4 + --- +configure.in + - bumped LIBVERSION up to 2.1.1, indicating that this is patch + level 1 to release 2.1 + + + 9/16 + ---- +Makefile.in + - `make distclean' now descends into the `examples' subdir + +doc/Makefile.in + - the `distclean' and `maintainer-clean' targets should remove + Makefile + +examples/Makefile.in + - added the various clean targets + + 4/2 + --- +configure.in + - bumped LIBVERSION up to 2.2 diff --git a/readline/CHANGES b/readline/CHANGES new file mode 100644 index 00000000000..382406e30db --- /dev/null +++ b/readline/CHANGES @@ -0,0 +1,84 @@ +This document details the changes between this version, readline-2.2.1, +and the previous version, readline-2.2. + +1. Changes to Readline + +a. The `make install' target was corrected so that it did not move the + newly-installed libreadline.a to libhistory.old + +b. The `make install' target for the documentation will now install the + info files from the source directory if they do not appear in the + build directory, since they are shipped in the readline tar file. + +c. Fixed a problem with redisplay that showed up when the prompt string was + longer than the screen width and the prompt contained invisible characters. + +d. Fixed a problem with the paren matching code -- the blink was far too + short (it's specified in microseconds, not milliseconds, Chet!). + +------------------------------------------------------------------------------ +This document details the changes between this version, readline-2.2, +and the previous version, readline-2.1. + +1. Changes to Readline + +a. Added a missing `extern' to a declaration in readline.h that kept + readline from compiling cleanly on some systems. + +b. The history file is now opened with mode 0600 when it is written for + better security. + +c. Changes were made to the SIGWINCH handling code so that prompt redisplay + is done better. + +d. ^G now interrupts incremental searches correctly. + +e. A bug that caused a core dump when the set of characters to be quoted + when completing words was empty was fixed. + +f. Fixed a problem in the readline test program rltest.c that caused a core + dump. + +g. The code that handles parser directives in inputrc files now displays + more error messages. + +h. The history expansion code was fixed so that the appearance of the + history comment character at the beginning of a word inhibits history + expansion for that word and the rest of the input line. + +i. The code that prints completion listings now behaves better if one or + more of the filenames contains non-printable characters. + +j. The time delay when showing matching parentheses is now 0.5 seconds. + + +2. New Features in Readline + +a. There is now an option for `iterative' yank-last-arg handline, so a user + can keep entering `M-.', yanking the last argument of successive history + lines. + +b. New variable, `print-completions-horizontally', which causes completion + matches to be displayed across the screen (like `ls -x') rather than up + and down the screen (like `ls'). + +c. New variable, `completion-ignore-case', which causes filename completion + and matching to be performed case-insensitively. + +d. There is a new bindable command, `magic-space', which causes history + expansion to be performed on the current readline buffer and a space to + be inserted into the result. + +e. There is a new bindable command, `menu-complete', which enables tcsh-like + menu completion (successive executions of menu-complete insert a single + completion match, cycling through the list of possible completions). + +f. There is a new bindable command, `paste-from-clipboard', for use on Win32 + systems, to insert the text from the Win32 clipboard into the editing + buffer. + +g. The key sequence translation code now understands printf-style backslash + escape sequences, including \NNN octal escapes. These escape sequences + may be used in key sequence definitions or macro values. + +h. An `$include' inputrc file parser directive has been added. diff --git a/readline/COPYING b/readline/COPYING new file mode 100644 index 00000000000..a43ea2126fb --- /dev/null +++ b/readline/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/readline/ChangeLog b/readline/ChangeLog new file mode 100644 index 00000000000..75ea09dc1df --- /dev/null +++ b/readline/ChangeLog @@ -0,0 +1,961 @@ +Tue Feb 9 10:38:57 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * configure.in: Do not use the ./support directory. + * configure: Regenerate. + +Wed Jan 6 12:24:19 1999 Christopher Faylor <cgf@cygnus.com> + + * configure.in: Use LOCAL_CFLAGS rather than CFLAGS for + searching libtermcap directory. + * configure: Regenerate. + +Thu Dec 31 12:07:01 1998 Christopher Faylor <cgf@cygnus.com> + + * configure.in: Search devo libtermcap directory for termcap.h + when compiling for cygwin. + * configure: Regenerated. + +1998-12-30 Michael Meissner <meissner@cygnus.com> + + * Makefile.in (install): Only try to copy libreadline.a and + libhistory.a if they exist. + +Tue Dec 29 23:49:20 1998 Christopher Faylor <cgf@cygnus.com> + + * cross-build/cygwin.cache: Add a couple more known settings. + * configure.in: Fix typo. + * configure: Regenerated. + +Tue Dec 29 18:11:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * cross-build: new directory. + + * cross-build/cygwin.cache: new file. Used for Cygwin cross builds. + + * configure.in: added tests for cross-build for Cygwin. + +1998-12-24 Jason Molenda (jsm@bugshack.cygnus.com) + + * Makefile.in: Add CYGNUS LOCAL comment. + * acconfig.h: Add missing defines. + * config.h.bot: Add missing content. + * configure, config.h.in: Regenerated. + +Wed Dec 23 16:21:41 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * Makefile.in: comment out the rule to rebuild configure by + running autoconf. + +Tue Dec 22 10:00:30 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * shell.c (savestring): ifdef'd it out. + + * Imported new version of Readline 2.2.1. Removed all the Cygnus + local changes. + + New files: acconfig.h, aclocal.m4, ansi_stdlib.h, callback.c, + config.h.in, configure, histexpand.c, histfile.c, histlib.h, + histsearch.c, input.c, kill.c, macro.c, nls.c, posixdir.h, + posixjmp.h, posixstat.h, rlconf.h, rltty.h, rlwinsize.h, shell.c, + tcap.h, terminal.c, undo.c, util.c, support directory. + + Removed files: sysdep*, config directory. + + +Fri Dec 4 15:25:41 1998 David Taylor <taylor@texas.cygnus.com> + + The following changes were made by Jim Blandy + <jimb@zwingli.cygnus.com> and David Taylor + <taylor@texas.cygnus.com> as part of a project to merge in changes + made by HP; HP did not create ChangeLog entries. + + * config/mp-enable-tui: New file. + (TUI_CFLAGS): Search devo's include directory, as long as we're + totally ruining modularity. + (INCLUDE_SRCDIR): New var. + (GDB_TUI_SRCDIR): Fix syntax error. + + * configure.in: Check the --enable-tui flag; if it's set, include + a makefile fragment that #defines TUI and adds the needed #include + directories. + (*-*-hpux*): New host; use sysdep-hpux.h. + + * Makefile.in (.c.o): Check the variable set in the makefile + fragment above. + + * display.c (term_goto): declare it. + (insert_some_chars): set it. + (delete_chars): set it. + + * readline.c: add tui include files surrounded by TUI. + (rl_reset): new function, move some of rl_abort functionality to + here. + (rl_abort): call rl_reset. + (rl_getc): tui changes. + (init_terminal_io): tui changes. + + * readline.h (tui_version, fputc_unfiltered, fputs_unfiltered, + tui_tputs): declare if TUI is defined. + + * rltty.c (prepare_terminal_settings): additional comment. + + * signals.c: add tui include files surrounded by TUI. move #if + and #endif to column 1 so HP's compiler will accept them. Remove + declaration of tuiDoAndReturnToTop since it's declared in tui.h. + (rl_handle_sigwinch): call tuiDoAndReturnToTop if TUI defined. + (rl_handle_sigwinch_on_clear): define if TUI defined. + (rl_set_signals): if TUI, avoid infinite recursion. + (rl_clear_signals): install rl_handle_sigwinch_on_clear. + + * sysdep-hpux.h: New file. + +Mon Nov 2 15:26:33 1998 Geoffrey Noer <noer@cygnus.com> + + * configure.in: Check cygwin* instead of cygwin32*. + +Tue Jul 28 09:43:27 1998 Jeffrey A Law (law@cygnus.com) + + * sysdep-hpux11.h: New file. + * configure.in (*-*-*-hpux11*): Use sysdep-hpux11.h. + +Thu Jul 23 17:48:21 1998 Ian Lance Taylor <ian@cygnus.com> + + * configure.bat: Remove obsolete file. + * examples/configure.bat: Remove obsolete file. + +Wed May 13 13:41:53 1998 Ian Lance Taylor <ian@cygnus.com> + + * sysdep-6irix.h: New file. + * configure.in (*-*-irix6*): New host; use sysdep-6irix.h. + + * Makefile.in (isearch.o, search.o): Depend upon sysdep.h. + (Makefile): Depend upon $(srcdir)/configure.in. + +Thu Apr 9 11:59:38 1998 Ian Dall (<Ian.Dall@dsto.defence.gov.au> + + * configure.in (host==netbsd): Include config/mh-bsd44. + * config/mh-bsd44: New file. + +Wed Dec 3 16:48:20 1997 Michael Snyder (msnyder@cleaver.cygnus.com) + + * rltty.c: fix typos. + +Tue Oct 8 08:59:24 1996 Stu Grossman (grossman@critters.cygnus.com) + + * tilde.c (tilde_word_expand): __MSDOS___ -> __MSDOS__ + +Sat Oct 05 11:24:34 1996 Mark Alexander <marka@cygnus.com> + + * rldefs.h: On Linux, include <termios.h> to fix compile error + in <termcap.h>. + +Wed Sep 4 18:06:51 1996 Stu Grossman (grossman@critters.cygnus.com) + + * rldefs.h: Enable HANDLE_SIGNALS for cygwin32. + +Thu Aug 29 16:59:45 1996 Michael Meissner <meissner@tiktok.cygnus.com> + + * configure.in (i[345]86-*-*): Recognize i686 for pentium pro. + +Fri Aug 16 17:49:57 1996 Stu Grossman (grossman@critters.cygnus.com) + + * complete.c: Include <pwd.h> if not DOS, and if cygwin32 or not + win32. + * configure.in: Add test for *-*-cygwin32* to use config/mh-posix. + * readline.c: Move decl of tgetstr to rldefs.h. + * (_rl_set_screen_size): Remove redundant ifdef MINIMALs. + * rldefs.h: Don't do MINIMAL for cygwin32. Cygwin32 now uses + full-blown readline, except for termcap. + +Sun Aug 11 21:06:26 1996 Stu Grossman (grossman@critters.cygnus.com) + + * rldefs.c: Get rid of define of SIGALRM if _WIN32 or __MSDOS__. + * Don't define ScreenCols/ScreenRows/... if cygwin32. + * sysdep-norm.h: Don't include <malloc.h> if cygwin32. + +Sun Aug 11 14:59:09 1996 Fred Fish <fnf@cygnus.com> + + * rldefs.h: If __osf__is defined, include <termio.h> instead of + <sgtty.h>. + +Fri Aug 9 08:54:26 1996 Stu Grossman (grossman@critters.cygnus.com) + + * bind.c complete.c history.c readline.c: Don't include sys/file.h. + * complete.c display.c parens.c readline.c rldefs.h rltty.c + signals.c tilde.c: Change refs to _MSC_VER and __WIN32__ to _WIN32. + * signals.c (rl_signal_handler): Ifdef out kill if _WIN32. + * sysdep-norm.h: Ifdef out include of dirent.h if _WIN32. + Include malloc.h if _WIN32. + +Thu Jul 18 15:59:35 1996 Michael Meissner <meissner@tiktok.cygnus.com> + + * rldefs.h (sys/uio.h) Before sys/stream.h is included under AIX, + include sys/uio.h, which prevents an undefined structure used in a + prototype message from being generated. + +Tue Jun 25 23:05:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) + + * Makefile.in (datadir): Set to $(prefix)/share. + (docdir): Removed. + +Sun May 26 15:14:42 1996 Fred Fish <fnf@cygnus.com> + + From: David Mosberger-Tang <davidm@azstarnet.com> + + * sysdep-linux.h: New file. + * display.c: Add include of "sysdep.h" to get HAVE_VARARGS_H. + * configure.in: Change pattern i[345]86-*-linux* into *-*-linux* to + support non-x86 based Linux platforms. + +Sun Apr 7 22:06:11 1996 Fred Fish <fnf@cygnus.com> + + From: Miles Bader <miles@gnu.ai.mit.edu> + * config/mh-gnu: New file. + * configure.in (*-*-gnu*): New host. + +Sun Apr 7 13:21:51 1996 Fred Fish <fnf@cygnus.com> + + From: Robert Lipe <robertl@dgii.com> + * configure.in: SCO OpenServer 5 (a.k.a 3.2v5*) is more like + SCO 3.2v4 than 3.2v2. + +Wed Jan 3 18:22:10 1996 steve chamberlain <sac@slash.cygnus.com> + + * readline.c, display.c, complete.c: Add _MSC_VER to list of + things which can't do most things. + +Thu Nov 16 15:39:05 1995 Geoffrey Noer <noer@cygnus.com> + + * complete.c: Change WIN32 to __WIN32__, added #else return NULL + to end of that define. + +Tue Oct 31 10:38:58 1995 steve chamberlain <sac@slash.cygnus.com> + + * display.c, parens.c, readline.c, rldefs.h: Change use of + WIN32 to __WIN32__. + +Tue Oct 10 11:07:23 1995 Fred Fish <fnf@cygnus.com> + + * Makefile.in (BISON): Remove macro. + +Tue Oct 10 08:49:00 1995 steve chamberlain <sac@slash.cygnus.com> + + * complete.c (filename_completion_function): Enable for + win32 when not MSC. + +Sun Oct 8 04:17:19 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * configure.in: Handle powerpc-ibm-aix* like rs6000-ibm-aix*. + +Sat Oct 7 20:36:16 1995 Michael Meissner <meissner@cygnus.com> + + * rltty.c (outchar): Return an int, like tputs expects. + * signals.c (_rl_output_character_function): Ditto. + +Fri Sep 29 15:19:23 1995 steve chamberlain <sac@slash.cygnus.com> + + Fixes for when the host WIN32, but not MSC. + * complete.c: Sometimes have pwd.h + * parens.c: WIN32 has similar restrictions to __GO32__. + * readline.c (__GO32__): Some of this moved into rldefs.h + * signals.c (__GO32__): Likewise. + * rldefs.h (MSDOS||WIN32) becomes MSDOS||MSC. + (WIN32&&!WIN32): New definitions. + +Wed Sep 20 12:57:17 1995 Ian Lance Taylor <ian@cygnus.com> + + * Makefile.in (maintainer-clean): New synonym for realclean. + +Wed Mar 1 13:33:43 1995 Michael Meissner <meissner@tiktok.cygnus.com> + + * rltty.c (outchar): Provide prototype for outchar, to silence + type warnings in passing outchar to tputs on systems like Linux + that have full prototypes. + + * signals.c (_rl_output_character_function): Provide prototype to + silence type warnings. + +Sun Jan 15 14:10:37 1995 Steve Chamberlain <sac@splat> + + * rldefs.h: Define MINIMAL for __GO32__ and WIN32. + * complete.c, display.c, readline.c, rltty.c: Test MINIMAL + instead of __GO32__. + +Wed Aug 24 13:04:47 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) + + * configure.in: Change i[34]86 to i[345]86. + +Sat Jul 16 13:26:31 1994 Stan Shebs (shebs@andros.cygnus.com) + + * configure.in (m88*-harris-cxux7*): Recognize. + * sysdep-cxux7.h: New file. + +Fri Jul 8 13:18:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) + + * rttty.c (control_meta_key_on): Remove superfluous testing of + __GO32__. + +Thu Jun 30 15:21:54 1994 Steve Chamberlain (sac@jonny.cygnus.com) + + * rltty.c (control_meta_key_on): Don't compile if __GO32__ is + defined. + (rltty_set_default_bindings): Likewise. + * display.c (insert_some_chars, delete_chars): row_start should be + a short. + * parens.c (rl_insert_close): No FD_SET if using __GO32__. + * readline.c (rl_gather_tyi): Strip off spurious high bits. + +Sun Jun 12 03:51:52 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * history.c: Swap inclusion of rldefs.h and chardefs.h to avoid + CTRL macro redefinition. + +Mon May 9 18:29:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) + + * readline.c (readline_default_bindings): Don't compile if + __GO32__ is defined. + (_rl_set_screen_size): Likewise. + * rltty.c (rltty_set_default_bindings): Likewise. + (control_meta_key): Likewise. + * display.c: If __GO32__ is defined, include <sys/pc.h>. + * parens.c: If __GO32__ is defined, undefine FD_SET. + * signals.c: Include SIGWINCH handling in the set of things which + is not done if HANDLE_SIGNALS is not set. + +Fri May 6 13:38:39 1994 Steve Chamberlain (sac@cygnus.com) + + * config/mh-go32: New fragment. + * configure.in (host==go32): Use go32 fragment. + +Wed May 4 14:36:53 1994 Stu Grossman (grossman@cygnus.com) + + * chardefs.h, rldefs.h: Move decls of string funcs from chardefs.h + to rldefs.h so that they don't pollute apps that include + readline.h. + * history.c: include rldefs.h to get decls of string funcs. + +Wed May 4 12:15:11 1994 Stan Shebs (shebs@andros.cygnus.com) + + * configure.in (rs6000-bull-bosx*): New configuration, RS/6000 + variant. + +Wed Apr 20 10:43:52 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Use mh-posix for sunos4.1*. + +Wed Apr 13 21:28:44 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * rltty.c (set_tty_settings): Don't set readline_echoing_p. + (rl_deprep_terminal) [NEW_TTY_DRIVER]: Set readline_echoing_p. + +Sun Mar 13 09:13:12 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Add TAGS target. + +Wed Mar 9 18:01:31 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * isearch.c, search.c: Include sysdep.h. + +Thu Mar 3 17:40:03 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * configure.in: For ISC, use mh-sysv, not mh-isc. + +Thu Feb 24 04:13:53 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * Merge in changes from bash-1.13.5. Merge changes from glob/tilde.c + into tilde.c and use it. Add system function declarations where + necessary. Check for __GO32__, not _GO32_ consistently. + * Makefile.in: Update dependencies. + * rltty.c: Include <sys/file.h> to match include file setup + in readline.c for rldefs.h. Otherwise we get inconsistent + TTY_DRIVER definitions in readline.c and rltty.c. + * bind.c, complete.c: Do not include <sys/types.h>, it is already + included via sysdep.h, which causes problems if <sys/types.h> has + no multiple inclusion protection. + * readline.c (_rl_set_screen_size): Reestablish test for + TIOCGWINSZ_BROKEN. + * rldefs.h: Define S_ISREG if necessary. + +Fri Feb 18 08:56:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Add search.o rule for Sun make. + +Wed Feb 16 16:35:49 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * rltty.c: #if out some code if __GO32__. + +Tue Feb 15 14:07:08 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * readline.c (_rl_output_character_function), display.c: + Return int, not void, to conform with the expected arg of tputs. + * readline.c (init_terminal_io): tgetflag only takes 1 arg. + * readline.c (_rl_savestring): New function. + * chardefs.h: To avoid conflicts and/or warnings, define + savestring as a macro wrapper for _rl_savestring. + * display.c (extern term_xn): It's an int flag, not a string. + * charsdefs.h, rldefs.h: Remove HAVE_STRING_H-related junk. + +Sat Feb 5 08:32:30 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Remove obsolete rules for history.info and + readline.info. + +Thu Jan 27 17:04:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * chardefs.h: Only declare strrchr if it is not #define'd. + +Tue Jan 25 11:30:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * rldefs.h: Accept __hpux as well as hpux for HP compiler in ANSI mode. + +Fri Jan 21 17:31:26 1994 Jim Kingdon (kingdon@lisa.cygnus.com) + + * chardefs.h, tilde.c: Just declare strrchr rather than trying to + include a system header. + +Fri Jan 21 14:40:43 1994 Fred Fish (fnf@cygnus.com) + + * Makefile.in (distclean, realclean): Expand local-distclean + inline after doing recursion. You can't recurse after removing + Makefile. Make them depend on local-clean. + * Makefile.in (local-distclean): Remove now superfluous target. + +Mon Jan 17 12:42:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com) + + * readline.c (doing_an_undo): Delete second declaration, since it + confuses the alpha-osf1 native compiler. + +Sun Jan 16 12:33:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * complete.c, bind.c: Include <sys/stat.h>. + * complete.c: Define X_OK if not defined by a system header. + + * chardefs.h: Don't declare xmalloc. + + * keymaps.h: Include "chardefs.h" not <readline/chardefs.h>. + + * Makefile.in (clean mostlyclean distclean realclean): Recurse + into subdirectories as well as doing this directory. Add clean-dvi + target. + +Sat Jan 15 19:36:12 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * readline.c, display.c: Patches to allow use of all 80 + columns on most terminals (those with am and xn). + + Merge in changes from bash-1.13. The most obvious one is + that the file readline.c has been split into multiple files. + * bind.c, complete.c, dispay.c, isearch.c, parens.c, rldefs.h, + rltty.c, search.c signals.c, tilde.c, tilde.h, xmalloc.c: New files. + +Sat Dec 11 16:29:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) + + * readline.c (rl_getc): If GO32, trim high bit from getkey, + otherwise fancy PC keys cause grief. + +Fri Nov 5 11:49:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add doc to configdirs. + * Makefile.in (info dvi install-info clean-info): Recurse into doc. + +Fri Oct 22 07:55:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add * to end of all OS names. + +Tue Oct 5 12:33:51 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * readline.c: Add stuff for HIUX to place where we detect termio + vs. sgtty (ugh, but I don't see a simple better way). + +Wed Sep 29 11:02:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * readline.c (parser_if): Free tname when done with it (change + imported from from bash 1.12 readline). + +Tue Sep 7 17:15:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in (m88k-*-sysvr4*): Comment out previous change. + +Fri Jul 2 11:05:34 1993 Ian Lance Taylor (ian@cygnus.com) + + * configure.in (*-*-riscos*): New entry; use mh-sysv. + +Wed Jun 23 13:00:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add comment. + +Mon Jun 14 14:28:55 1993 Jim Kingdon (kingdon@eric) + + * configure.in (m88k-*-sysvr4*): Use sysdep-norm.h. + +Sun Jun 13 13:04:09 1993 Jim Kingdon (kingdon@cygnus.com) + + * Makefile.in ({real,dist}clean): Remove sysdep.h. + +Thu Jun 10 11:22:41 1993 Jim Kingdon (kingdon@cygnus.com) + + * Makefile.in: Add mostlyclean, distclean, and realclean targets. + +Fri May 21 17:09:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * config/mh-isc: New file. + * configure.in: Use it. + +Sat Apr 17 00:40:12 1993 Jim Kingdon (kingdon at calvin) + + * readline.c, history.c: Don't include sys/types.h; sysdep.h does. + + * config/mh-sysv: Define TIOCGWINSZ_BROKEN. + readline.c: Check it. + +Wed Mar 24 02:06:15 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) + + * Makefile.in: add installcheck & dvi targets + +Fri Mar 12 18:36:53 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: recognize *-*-solaris2* instead of *-*-solaris* (a + number of people want to call SunOS 4.1.2 "solaris1.0" + and get it right) + +Tue Mar 2 21:25:36 1993 Fred Fish (fnf@cygnus.com) + + * sysdep-sysv4.h: New file for SVR4. + * configure.in (*-*-sysv4*): Use sysdep-sysv4.h. + + * configure.in (*-*-ultrix2): Add triplet from Michael Rendell + (michael@mercury.cs.mun.ca) + +Tue Dec 15 12:38:16 1992 Ian Lance Taylor (ian@cygnus.com) + + * configure.in (i[34]86-*-sco3.2v4*): use mh-sco4. + * config/mh-sco4: New file, like mh-sco but without defining + _POSIX_SOURCE. + +Wed Nov 11 21:20:14 1992 John Gilmore (gnu@cygnus.com) + + * configure.in: Reformat to one-case-per-line. + Handle SunOS 3.5, as per Karl Berry, <karl@claude.cs.umb.edu>. + +Wed Nov 4 15:32:31 1992 Stu Grossman (grossman at cygnus.com) + + * sysdep-norm.h: Remove some crud, install dire warning. + +Thu Oct 22 01:08:13 1992 Stu Grossman (grossman at cygnus.com) + + * configure.in: Make SCO work again... + +Mon Oct 12 15:04:07 1992 Ian Lance Taylor (ian@cygnus.com) + + * readline.c (init_terminal_io): if tgetent returns 0, the + terminal type is unknown. + +Thu Oct 1 23:44:14 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: use cpu-vendor-os triple instead of nested cases + +Wed Sep 30 12:58:57 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (rl_complete_internal): Cast alloca to (char *) to + avoid warning. + +Fri Sep 25 12:45:05 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (clear_to_eol, rl_generic_bind): Make static. + (rl_digit_loop): Add arg to call to rl_message(). + * vi_mode.c (rl_vi_first_print): Add arg to call to + rl_back_to_indent(). + +Wed Aug 19 14:59:07 1992 Ian Lance Taylor (ian@cygnus.com) + + * Makefile.in: always create installation directories, use full + file name for install target. + +Wed Aug 12 15:50:57 1992 John Gilmore (gnu@cygnus.com) + + * readline.c (last_readline_init_file): Fix typo made by Steve + Chamberlain/DJ Delorie. Proper control file name is ~/.inputrc, + not ~/inputrc. + +Thu Jun 25 16:15:27 1992 Stu Grossman (grossman at cygnus.com) + + * configure.in: Make bsd based systems use sysdep-obsd.h. + +Tue Jun 23 23:22:53 1992 Per Bothner (bothner@cygnus.com) + + * config/mh-posix: New file, for Posix-compliant systems. + * configure.in: Use mh-posix for Linux (free Unix clone). + +Tue Jun 23 21:59:20 1992 Fred Fish (fnf@cygnus.com) + + * sysdep-norm.h (alloca): Protect against previous definition as + a macro with arguments. + +Fri Jun 19 15:48:54 1992 Stu Grossman (grossman at cygnus.com) + + * sysdep-obsd.h: #include <sys/types.h> to make this more Kosher. + +Fri Jun 19 12:53:28 1992 John Gilmore (gnu at cygnus.com) + + * config/mh-apollo68v, mh-sco, mh-sysv, mh-sysv4}: RANLIB=true. + +Mon Jun 15 13:50:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: use mh-sysv4 on solaris2 + +Mon Jun 15 12:28:24 1992 Fred Fish (fnf@cygnus.com) + + * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install, + it is broken on ncr 3000's. + * config/mh-ncr3000 (RANLIB): Use RANLIB=true. + +Mon Jun 15 01:35:55 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: Make new SIGNALS_* macros to parameterize the + ugly changes in signal blocking. Use them throughout, + reducing #ifdef HAVE_POSIX_SIGNALS and HAVE_BSD_SIGNALS clutter + significantly. Make all such places use POSIX if available, + to avoid losing with poor `sigsetmask' emulation from libiberty. + +Sun Jun 14 15:19:51 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (insert_some_chars): Return void. + +Thu Jun 11 01:27:45 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: #undef PC, which Solaris2 defines in sys/types.h, + clobbering the termcap global variable PC. + +Tue Jun 9 17:30:23 1992 Fred Fish (fnf@cygnus.com) + + * config/{mh-ncr3000, mh-sysv4}: Change INSTALL to use + /usr/ucb/install. + +Mon Jun 8 23:10:07 1992 Fred Fish (fnf@cygnus.com) + + * readline.h (rl_completer_quote_characters): Add declaration. + * readline.c (rl_completer_quote_characters): Add global var. + * readline.c (strpbrk): Add prototype and function. + * readline.c (rl_complete_internal): Add code to handle + expansion of quoted strings. + +Mon May 11 12:39:30 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: Can't initialize FILE *'s with stdin and stdout, + because they might not be constant. Patch from Tom Quinn, + trq@dinoysos.thphys.ox.ac.uk. + +Tue Apr 28 21:52:34 1992 John Gilmore (gnu at cygnus.com) + + * readline.h: Declare rl_event_hook (which already existed). + Suggested by Christoph Tietz <tietz@zi.gmd.dbp.de>. + +Wed Apr 22 18:08:01 1992 K. Richard Pixley (rich@rtl.cygnus.com) + + * configure.in: remove subdirs declaration. The obsolete semantic + for subdirs has been usurped by per's new meaning. + +Tue Apr 21 11:54:23 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in: rework CFLAGS so that they can be set on the + command line to make. Remove MINUS_G. Default CFLAGS to -g. + +Fri Apr 10 23:02:27 1992 Fred Fish (fnf@cygnus.com) + + * configure.in: Recognize new ncr3000 config. + * config/mh-ncr3000: New NCR 3000 config file. + +Wed Mar 25 10:46:30 1992 John Gilmore (gnu at cygnus.com) + + * history.c (stifle_history): Negative arg treated as zero. + +Tue Mar 24 23:46:20 1992 K. Richard Pixley (rich@cygnus.com) + + * config/mh-sysv: INSTALL_PROG -> INSTALL. + +Mon Feb 10 01:41:35 1992 Brian Fox (bfox at gnuwest.fsf.org) + + * history.c (history_do_write) Build a buffer of all of the lines + to write and write them in one fell swoop (lower overhead than + calling write () for each line). Suggested by Peter Ho. + + * vi_mode.c (rl_vi_subst) Don't forget to end the undo group. + +Sat Mar 7 00:15:36 1992 K. Richard Pixley (rich@rtl.cygnus.com) + + * Makefile.in: remove FIXME's on info and install-info targets. + +Fri Mar 6 22:02:04 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in: added check target. + +Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in, configure.in: removed traces of namesubdir, + -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced + copyrights to '92, changed some from Cygnus to FSF. + +Fri Feb 21 14:37:32 1992 Steve Chamberlain (sac at rtl.cygnus.com) + + * readline.c, examples/fileman.c: patches from DJ to support DOS + +Thu Feb 20 23:23:16 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (rl_read_init_file): Make sure that null filename is + not passed to open() or else we end up opening the directory, and + read a bunch of garbage into keymap[]. + +Mon Feb 17 17:15:09 1992 Fred Fish (fnf at cygnus.com) + + * readline.c (readline_default_bindings): Only make use of VLNEXT + when both VLNEXT and TERMIOS_TTY_DRIVER is defined. On SVR4 + <termio.h> includes <termios.h>, so VLNEXT is always defined. + + * sysdep-norm.h (_POSIX_VERSION): Define this for all SVR4 + systems so that <termios.h> gets used, instead of <termio.h>. + +Fri Dec 20 12:04:31 1991 Fred Fish (fnf at cygnus.com) + + * configure.in: Change svr4 references to sysv4. + +Tue Dec 10 04:07:20 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: infodir belongs in datadir. + +Fri Dec 6 23:23:14 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: remove spaces following hyphens, bsd make can't + cope. added clean-info. added standards.text support. Don't + know how to make info anymore. + + * configure.in: commontargets is no longer a recognized hook, so + remove it. new subdir called doc. + +Thu Dec 5 22:46:10 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: idestdir and ddestdir go away. Added copyrights + and shift gpl to v2. Added ChangeLog if it didn't exist. docdir + and mandir now keyed off datadir by default. + +Fri Nov 22 09:02:32 1991 John Gilmore (gnu at cygnus.com) + + * sysdep-obsd.h: Rename from sysdep-newsos.h. + * configure.in: Use sysdep-obsd for Mach as well as NEWs. + + * sysdep-norm.h, sysdep-aix.h: Add <sys/types.h>, which POSIX + requires to make <dirent.h> work. Improve Sun alloca decl. + +Thu Nov 21 18:48:08 1991 John Gilmore (gnu at cygnus.com) + + * Makefile.in: Clean up ../glob/tilde.c -> tilde.o path. + Clean up makefile a bit in general. + +Thu Nov 21 14:40:29 1991 Stu Grossman (grossman at cygnus.com) + + * configure.in, config/mh-svr4: Make SVR4 work. + + * readline.c: Move config stuff to sysdep.h, use typedef dirent + consistently, remove refs to d_namlen (& D_NAMLEN) to improve + portability. Also, update copyright notice. + readline.h: remove config stuff that I added erroneously in the + first place. + + * emacs_keymap.c, funmap.c, history.c, keymaps.c, vi_keymap.c, + vi_mode.c: move config stuff to sysdep.h, update copyright notices. + +Tue Nov 19 15:02:13 1991 Stu Grossman (grossman at cygnus.com) + + * history.c: #include "sysdep.h". + +Tue Nov 19 10:49:17 1991 Fred Fish (fnf at cygnus.com) + + * Makefile.in, config/hm-sysv, config/hm-sco: Change SYSV to + USG to match current usage. + + * readline.c: Add USGr4 to list of defined things to check for + to use <dirent.h> style directory access. + + * config/hm-svr4: New file for System V Release 4 (USGr4). + +Mon Nov 18 23:59:52 1991 Stu Grossman (grossman at cygnus.com) + + * readline.c (filename_completion_function): use struct dirent + instead of struct direct. + +Fri Nov 1 07:02:13 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (rl_translate_keyseq) Make C-? translate to RUBOUT + unconditionally. + +Mon Oct 28 11:34:52 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c; Use Posix directory routines and macros. + + * funmap.c; Add entry for call-last-kbd-macro. + + * readline.c (rl_prep_term); Use system EOF character on POSIX + systems also. + +Thu Oct 3 16:19:53 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c; Make a distinction between having a TERMIOS tty + driver, and having POSIX signal handling. You might one without + the other. New defines used HAVE_POSIX_SIGNALS, and + TERMIOS_TTY_DRIVER. + +Tue Jul 30 22:37:26 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_getc () If a call to read () returns without an + error, but with zero characters, the file is empty, so return EOF. + +Thu Jul 11 20:58:38 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: (rl_get_next_history, rl_get_previous_history) + Reallocate the buffer space if the line being moved to is longer + the the current space allocated. Amazing that no one has found + this bug until now. + +Sun Jul 7 02:37:05 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c:(rl_parse_and_bind) Allow leading whitespace. + Make sure TERMIO and TERMIOS systems treat CR and NL + disctinctly. + +Tue Jun 25 04:09:27 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: Rework parsing conditionals to pay attention to the + prior states of the conditional stack. This makes $if statements + work correctly. + +Mon Jun 24 20:45:59 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: support for displaying key binding information + includes the functions rl_list_funmap_names (), + invoking_keyseqs_in_map (), rl_invoking_keyseqs (), + rl_dump_functions (), and rl_function_dumper (). + + funmap.c: support for same includes rl_funmap_names (). + + readline.c, funmap.c: no longer define STATIC_MALLOC. However, + update both version of xrealloc () to handle a null pointer. + +Thu Apr 25 12:03:49 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * vi_mode.c (rl_vi_fword, fWord, etc. All functions use + the macro `isident()'. Fixed movement bug which prevents + continious movement through the text. + +Fri Jul 27 16:47:01 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (parser_if) Allow "$if term=foo" construct. + +Wed May 23 16:10:33 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (rl_dispatch) Correctly remember the last command + executed. Fixed typo in username_completion_function (). + +Mon Apr 9 19:55:48 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: username_completion_function (); For text passed in + with a leading `~', remember that this could be a filename (after + it is completed). + +Thu Apr 5 13:44:24 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_search_history (): Correctly handle case of an + unfound search string, but a graceful exit (as with ESC). + + * readline.c: rl_restart_output (); The Apollo passes the address + of the file descriptor to TIOCSTART, not the descriptor itself. + +Tue Mar 20 05:38:55 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_complete (); second call in a row causes possible + completions to be listed. + + * readline.c: rl_redisplay (), added prompt_this_line variable + which is the first character character following \n in prompt. + +Sun Mar 11 04:32:03 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * Signals are now supposedly handled inside of SYSV compilation. + +Wed Jan 17 19:24:09 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * history.c: history_expand (); fixed overwriting memory error, + added needed argument to call to get_history_event (). + +Thu Jan 11 10:54:04 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * readline.c: added mark_modified_lines to control the + display of an asterisk on modified history lines. Also + added a user variable called mark-modified-lines to the + `set' command. + +Thu Jan 4 10:38:05 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * readline.c: start_insert (). Only use IC if we don't have an im + capability. + +Fri Sep 8 09:00:45 1989 Brian Fox (bfox at aurel) + + * readline.c: rl_prep_terminal (). Only turn on 8th bit + as meta-bit iff the terminal is not using parity. + +Sun Sep 3 08:57:40 1989 Brian Fox (bfox at aurel) + + * readline.c: start_insert (). Uses multiple + insertion call in cases where that makes sense. + + rl_insert (). Read type-ahead buffer for additional + keys that are bound to rl_insert, and insert them + all at once. Make insertion of single keys given + with an argument much more efficient. + +Tue Aug 8 18:13:57 1989 Brian Fox (bfox at aurel) + + * readline.c: Changed handling of EOF. readline () returns + (char *)EOF or consed string. The EOF character is read from the + tty, or if the tty doesn't have one, defaults to C-d. + + * readline.c: Added support for event driven programs. + rl_event_hook is the address of a function you want called + while Readline is waiting for input. + + * readline.c: Cleanup time. Functions without type declarations + do not use return with a value. + + * history.c: history_expand () has new variable which is the + characters to ignore immediately following history_expansion_char. + +Sun Jul 16 08:14:00 1989 Brian Fox (bfox at aurel) + + * rl_prep_terminal () + BSD version turns off C-s, C-q, C-y, C-v. + + * readline.c -- rl_prep_terminal () + SYSV version hacks readline_echoing_p. + BSD version turns on passing of the 8th bit for the duration + of reading the line. + +Tue Jul 11 06:25:01 1989 Brian Fox (bfox at aurel) + + * readline.c: new variable rl_tilde_expander. + If non-null, this contains the address of a function to call if + the standard meaning for expanding a tilde fails. The function is + called with the text sans tilde (as in "foo"), and returns a + malloc()'ed string which is the expansion, or a NULL pointer if + there is no expansion. + + * readline.h - new file chardefs.h + Separates things that only readline.c needs from the standard + header file publishing interesting things about readline. + + * readline.c: + readline_default_bindings () now looks at terminal chararacters + and binds those as well. + +Wed Jun 28 20:20:51 1989 Brian Fox (bfox at aurel) + + * Made readline and history into independent libraries. + diff --git a/readline/INSTALL b/readline/INSTALL new file mode 100644 index 00000000000..95d84c820fb --- /dev/null +++ b/readline/INSTALL @@ -0,0 +1,176 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + diff --git a/readline/MANIFEST b/readline/MANIFEST new file mode 100644 index 00000000000..e9e1c4005f9 --- /dev/null +++ b/readline/MANIFEST @@ -0,0 +1,85 @@ +# +# Master distribution manifest for the standalone readline distribution +# +doc d +examples d +support d +COPYING f +README f +MANIFEST f +INSTALL f +CHANGELOG f +CHANGES f +aclocal.m4 f +acconfig.h f +config.h.in f +configure f +configure.in f +Makefile.in f +ansi_stdlib.h f +chardefs.h f +history.h f +histlib.h f +keymaps.h f +posixdir.h f +posixjmp.h f +posixstat.h f +readline.h f +rlconf.h f +rldefs.h f +rltty.h f +rlwinsize.h f +tcap.h f +tilde.h f +bind.c f +complete.c f +display.c f +emacs_keymap.c f +funmap.c f +input.c f +isearch.c f +keymaps.c f +kill.c f +macro.c f +nls.c f +parens.c f +readline.c f +rltty.c f +search.c f +shell.c f +signals.c f +terminal.c f +tilde.c f +undo.c f +util.c f +vi_keymap.c f +vi_mode.c f +callback.c f +xmalloc.c f +history.c f +histexpand.c f +histfile.c f +histsearch.c f +support/config.guess f +support/config.sub f +support/install.sh f +support/mkdirs f +support/mkdist f +doc/Makefile.in f +doc/texinfo.tex f +doc/rlman.texinfo f +doc/rltech.texinfo f +doc/rluser.texinfo f +doc/hist.texinfo f +doc/hstech.texinfo f +doc/hsuser.texinfo f +doc/readline.3 f +doc/texi2dvi f +doc/texi2html f +examples/Makefile.in f +examples/fileman.c f +examples/manexamp.c f +examples/rltest.c f +examples/rl.c f +examples/histexamp.c f +examples/Inputrc f diff --git a/readline/MANIFEST.doc b/readline/MANIFEST.doc new file mode 100644 index 00000000000..ed27cb39107 --- /dev/null +++ b/readline/MANIFEST.doc @@ -0,0 +1,16 @@ +# +# Master Manifest file for documentation-only distribution +# +doc d +MANIFEST.doc f +doc/readline.ps f +doc/history.ps f +doc/readline.dvi f +doc/history.dvi f +doc/readline.info f +doc/history.info f +doc/readline.html f +doc/readline_toc.html f +doc/history.html f +doc/history_toc.html f +doc/readline.0 f diff --git a/readline/Makefile.in b/readline/Makefile.in new file mode 100644 index 00000000000..0c5c169fe28 --- /dev/null +++ b/readline/Makefile.in @@ -0,0 +1,560 @@ +## -*- text -*- ## +# Master Makefile for the GNU readline library. +# Copyright (C) 1994, 1998 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +RL_LIBRARY_VERSION = @LIBVERSION@ +RL_LIBRARY_NAME = readline + +srcdir = @srcdir@ +VPATH = .:@srcdir@ +top_srcdir = @top_srcdir@ +BUILD_DIR = @BUILD_DIR@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +CC = @CC@ +LD = ld # needed when building shared libraries +RANLIB = @RANLIB@ +AR = ar +RM = rm -f +CP = cp +MV = mv + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +mandir = @mandir@ +includedir = @includedir@ + +infodir = @infodir@ + +man3dir = $(mandir)/man3 + +SHELL = /bin/sh + +# Programs to make tags files. +ETAGS = etags -tw +CTAGS = ctags -tw + +CFLAGS = @CFLAGS@ +LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@ @CFLAGS@ + +DEFS = @DEFS@ +LOCAL_DEFS = @LOCAL_DEFS@ + +# For libraries which include headers from other libraries. +INCLUDES = -I. -I$(srcdir) -I$(includedir) + +CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(CPPFLAGS) $(INCLUDES) $(LOCAL_CFLAGS) $(CFLAGS) + +# these two options need tweaking for compiler/OS versions other than gcc +# and SunOS4 +PICFLAG= -fpic # -pic for some versions of cc +SHLIB_OPTS= -assert pure-text -ldl # -Bshareable for some versions of gcc + +MAJOR= 3 +# shared library systems like SVR4's do not use minor versions +MINOR= .0 + +.SUFFIXES: .so + +.c.o: + $(CC) -c $(CCFLAGS) $< + +.c.so: + -mv $*.o z$*.o + $(CC) -c $(PICFLAG) $(CCFLAGS) $< + mv $*.o $@ + -mv z$*.o $*.o + +# The name of the main library target. +LIBRARY_NAME = libreadline.a +STATIC_LIBS = libreadline.a libhistory.a + +SHARED_READLINE = libreadline.so.$(MAJOR)$(MINOR) +SHARED_HISTORY = libhistory.so.$(MAJOR)$(MINOR) +SHARED_LIBS = $(SHARED_READLINE) $(SHARED_HISTORY) + +# The C code source files for this library. +CSOURCES = $(srcdir)/readline.c $(srcdir)/funmap.c $(srcdir)/keymaps.c \ + $(srcdir)/vi_mode.c $(srcdir)/parens.c $(srcdir)/rltty.c \ + $(srcdir)/complete.c $(srcdir)/bind.c $(srcdir)/isearch.c \ + $(srcdir)/display.c $(srcdir)/signals.c $(srcdir)/emacs_keymap.c \ + $(srcdir)/vi_keymap.c $(srcdir)/util.c $(srcdir)/kill.c \ + $(srcdir)/undo.c $(srcdir)/macro.c $(srcdir)/input.c \ + $(srcdir)/callback.c $(srcdir)/terminal.c $(srcdir)/xmalloc.c \ + $(srcdir)/history.c $(srcdir)/histsearch.c $(srcdir)/histexpand.c \ + $(srcdir)/histfile.c $(srcdir)/nls.c $(srcdir)/search.c \ + $(srcdir)/shell.c $(srcdir)/tilde.c + +# The header files for this library. +HSOURCES = readline.h rldefs.h chardefs.h keymaps.h history.h histlib.h \ + posixstat.h posixdir.h posixjmp.h tilde.h rlconf.h rltty.h \ + ansi_stdlib.h tcap.h + +HISTOBJ = history.o histexpand.o histfile.o histsearch.o shell.o +TILDEOBJ = tilde.o +OBJECTS = readline.o vi_mode.o funmap.o keymaps.o parens.o search.o \ + rltty.o complete.o bind.o isearch.o display.o signals.o \ + util.o kill.o undo.o macro.o input.o callback.o terminal.o \ + nls.o xmalloc.o $(HISTOBJ) $(TILDEOBJ) + +SHARED_HISTOBJ = history.so histexpand.so histfile.so histsearch.so shell.so +SHARED_TILDEOBJ = tilde.so +SHARED_OBJ = readline.so vi_mode.so funmap.so keymaps.so parens.so search.so \ + rltty.so complete.so bind.so isearch.so display.so signals.so \ + util.so kill.so undo.so macro.so input.so callback.so terminal.so \ + nls.so xmalloc.so $(SHARED_HISTOBJ) $(SHARED_TILDEOBJ) + +# The texinfo files which document this library. +DOCSOURCE = doc/rlman.texinfo doc/rltech.texinfo doc/rluser.texinfo +DOCOBJECT = doc/readline.dvi +DOCSUPPORT = doc/Makefile +DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT) + +CREATED_MAKEFILES = Makefile doc/Makefile examples/Makefile +CREATED_CONFIGURE = config.status config.h config.cache config.log \ + stamp-config stamp-h +CREATED_TAGS = TAGS tags + +INSTALLED_HEADERS = readline.h chardefs.h keymaps.h history.h tilde.h + +########################################################################## + +all: static + +static: $(STATIC_LIBS) +shared: $(SHARED_LIBS) + +libreadline.a: $(OBJECTS) + $(RM) $@ + $(AR) cr $@ $(OBJECTS) + -test -n "$(RANLIB)" && $(RANLIB) $@ + +libhistory.a: $(HISTOBJ) xmalloc.o + $(RM) $@ + $(AR) cr $@ $(HISTOBJ) xmalloc.o + -test -n "$(RANLIB)" && $(RANLIB) $@ + +$(SHARED_READLINE): $(SHARED_OBJ) + $(RM) $@ + $(LD) ${SHLIB_OPTS} -o $@ $(SHARED_OBJ) + +$(SHARED_HISTORY): $(SHARED_HISTOBJ) xmalloc.so + $(RM) $@ + $(LD) ${SHLIB_OPTS} -o $@ $(SHARED_HISTOBJ) xmalloc.so + +readline: $(OBJECTS) readline.h rldefs.h chardefs.h + $(CC) $(CCFLAGS) -o $@ ./examples/rl.c ./libreadline.a -ltermcap + +Makefile makefile: config.status $(srcdir)/Makefile.in + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +Makefiles makefiles: config.status $(srcdir)/Makefile.in + @for mf in $(CREATED_MAKEFILES); do \ + CONFIG_FILES=$$mf CONFIG_HEADERS= $(SHELL) ./config.status ; \ + done + +config.status: configure + $(SHELL) ./config.status --recheck + +config.h: stamp-h + +stamp-h: config.status $(srcdir)/config.h.in + CONFIG_FILES= CONFIG_HEADERS=config.h ./config.status + echo > $@ + +# CYGNUS LOCAL: Never run autoconf. +#$(srcdir)/configure: $(srcdir)/configure.in Comment-me-out in distribution +# cd $(srcdir) && autoconf Comment-me-out in distribution + +documentation: force + -test -d doc || mkdir doc + -( cd doc && $(MAKE) $(MFLAGS) ) + +examples: force + -test -d examples || mkdir examples + -(cd examples && ${MAKE} ${MFLAGS} all ) + +force: + +install: installdirs $(STATIC_LIBS) + for f in ${INSTALLED_HEADERS}; do \ + $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/readline ; \ + done + -( if test -f $(libdir)/libreadline.a ; then $(MV) $(libdir)/libreadline.a $(libdir)/libreadline.old; fi ) + $(INSTALL_DATA) libreadline.a $(libdir)/libreadline.a + -test -n "$(RANLIB)" && $(RANLIB) -t $(libdir)/libreadline.a + -( if test -f $(libdir)/libhistory.a; then $(MV) $(libdir)/libhistory.a $(libdir)/libhistory.old; fi ) + $(INSTALL_DATA) libhistory.a $(libdir)/libhistory.a + -test -n "$(RANLIB)" && $(RANLIB) -t $(libdir)/libhistory.a + -( if test -d doc ; then \ + cd doc && \ + ${MAKE} ${MFLAGS} infodir=$(infodir) $@; \ + fi ) + +installdirs: $(srcdir)/support/mkdirs + -$(SHELL) $(srcdir)/support/mkdirs $(includedir) \ + $(includedir)/readline $(libdir) $(infodir) $(man3dir) + +uninstall: + -test -n "$(includedir)" && cd $(includedir)/readline && \ + ${RM} ${INSTALLED_HEADERS} + -test -n "$(libdir)" && cd $(libdir) && \ + ${RM} libreadline.a libreadline.old libhistory.a libhistory.old $(SHARED_LIBS) + +install-shared: installdirs shared + -$(MV) $(libdir)/$(SHARED_HISTORY) $(libdir)/$(SHARED_HISTORY).old + $(INSTALL_DATA) $(SHARED_HISTORY) $(libdir)/$(SHARED_HISTORY) + -$(MV) $(libdir)/$(SHARED_READLINE) $(libdir)/$(SHARED_READLINE).old + $(INSTALL_DATA) $(SHARED_READLINE) $(libdir)/$(SHARED_READLINE) + +uninstall-shared: + -test -n "$(libdir)" && cd $(libdir) && ${RM} ${SHARED_LIBS} + +TAGS: force + $(ETAGS) $(CSOURCES) $(HSOURCES) + +tags: force + $(CTAGS) $(CSOURCES) $(HSOURCES) + +clean: force + $(RM) $(OBJECTS) $(STATIC_LIBS) + $(RM) $(SHARED_OBJ) $(SHARED_LIBS) + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + +mostlyclean: clean + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + +distclean maintainer-clean: clean + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + $(RM) Makefile + $(RM) $(CREATED_CONFIGURE) + $(RM) $(CREATED_TAGS) + +info dvi: + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + +install-info: +check: +installcheck: + +dist: force + @echo Readline distributions are created using $(srcdir)/support/mkdist. + @echo Here is a sample of the necessary commands: + @echo bash $(srcdir)/support/mkdist -m $(srcdir)/MANIFEST -s $(srcdir) -r $(RL_LIBRARY_NAME)-$(RL_LIBRARY_VERSION) + @echo tar cf $(RL_LIBRARY_NAME)-${RL_LIBRARY_VERSION}.tar ${RL_LIBRARY_NAME}-$(RL_LIBRARY_VERSION) + @echo gzip $(RL_LIBRARY_NAME)-$(RL_LIBRARY_VERSION).tar + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +# Dependencies +bind.o: ansi_stdlib.h posixstat.h +bind.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +bind.o: readline.h keymaps.h chardefs.h tilde.h +bind.o: history.h +callback.o: rlconf.h +callback.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +callback.o: readline.h keymaps.h chardefs.h tilde.h +complete.o: ansi_stdlib.h posixdir.h posixstat.h +complete.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +complete.o: readline.h keymaps.h chardefs.h tilde.h +display.o: ansi_stdlib.h posixstat.h +display.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +display.o: tcap.h +display.o: readline.h keymaps.h chardefs.h tilde.h +display.o: history.h +funmap.o: readline.h keymaps.h chardefs.h tilde.h +funmap.o: rlconf.h ansi_stdlib.h +funmap.o: ${BUILD_DIR}/config.h +histexpand.o: ansi_stdlib.h +histexpand.o: history.h histlib.h +histexpand.o: ${BUILD_DIR}/config.h +histfile.o: ansi_stdlib.h +histfile.o: history.h histlib.h +histfile.o: ${BUILD_DIR}/config.h +history.o: ansi_stdlib.h +history.o: history.h histlib.h +history.o: ${BUILD_DIR}/config.h +histsearch.o: ansi_stdlib.h +histsearch.o: history.h histlib.h +histsearch.o: ${BUILD_DIR}/config.h +input.o: ansi_stdlib.h +input.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +input.o: readline.h keymaps.h chardefs.h tilde.h +isearch.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +isearch.o: readline.h keymaps.h chardefs.h tilde.h +isearch.o: ansi_stdlib.h history.h +keymaps.o: emacs_keymap.c vi_keymap.c +keymaps.o: keymaps.h chardefs.h rlconf.h ansi_stdlib.h +keymaps.o: readline.h keymaps.h chardefs.h tilde.h +keymaps.o: ${BUILD_DIR}/config.h +kill.o: ansi_stdlib.h +kill.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +kill.o: readline.h keymaps.h chardefs.h tilde.h +kill.o: history.h +macro.o: ansi_stdlib.h +macro.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +macro.o: readline.h keymaps.h chardefs.h tilde.h +macro.o: history.h +nls.o: ansi_stdlib.h +nls.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +parens.o: rlconf.h +parens.o: ${BUILD_DIR}/config.h +parens.o: readline.h keymaps.h chardefs.h tilde.h +readline.o: readline.h keymaps.h chardefs.h tilde.h +readline.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +readline.o: history.h +readline.o: posixstat.h ansi_stdlib.h posixjmp.h +rltty.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +rltty.o: rltty.h +rltty.o: readline.h keymaps.h chardefs.h tilde.h +search.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +search.o: readline.h keymaps.h chardefs.h tilde.h +search.o: ansi_stdlib.h history.h +shell.o: ${BUILD_DIR}/config.h +shell.o: ansi_stdlib.h +signals.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +signals.o: readline.h keymaps.h chardefs.h tilde.h +signals.o: history.h +terminal.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +terminal.o: tcap.h +terminal.o: readline.h keymaps.h chardefs.h tilde.h +terminal.o: history.h +tilde.o: ansi_stdlib.h +tilde.o: ${BUILD_DIR}/config.h +tilde.o: tilde.h +undo.o: ansi_stdlib.h +undo.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +undo.o: readline.h keymaps.h chardefs.h tilde.h +undo.o: history.h +util.o: posixjmp.h ansi_stdlib.h +util.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +util.o: readline.h keymaps.h chardefs.h tilde.h +vi_mode.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +vi_mode.o: readline.h keymaps.h chardefs.h tilde.h +vi_mode.o: history.h ansi_stdlib.h +xmalloc.o: ${BUILD_DIR}/config.h +xmalloc.o: ansi_stdlib.h + +readline.o: $(srcdir)/readline.c +vi_mode.o: $(srcdir)/vi_mode.c +funmap.o: $(srcdir)/funmap.c +keymaps.o: $(srcdir)/keymaps.c +parens.o: $(srcdir)/parens.c +search.o: $(srcdir)/search.c +rltty.o: $(srcdir)/rltty.c +complete.o: $(srcdir)/complete.c +bind.o: $(srcdir)/bind.c +isearch.o: $(srcdir)/isearch.c +display.o: $(srcdir)/display.c +signals.o: $(srcdir)/signals.c +util.o: $(srcdir)/util.c +kill.o: $(srcdir)/kill.c +undo.o: $(srcdir)/undo.c +macro.o: $(srcdir)/macro.c +input.o: $(srcdir)/input.c +callback.o: $(srcdir)/callback.c +terminal.o: $(srcdir)/terminal.c +nls.o: $(srcdir)/nls.c +xmalloc.o: $(srcdir)/xmalloc.c +history.o: $(srcdir)/history.c +histexpand.o: $(srcdir)/histexpand.c +histfile.o: $(srcdir)/histfile.c +histsearch.o: $(srcdir)/histsearch.c +shell.o: $(srcdir)/shell.c +tilde.o: $(srcdir)/tilde.c + +bind.so: ansi_stdlib.h posixstat.h +bind.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +bind.so: readline.h keymaps.h chardefs.h tilde.h +bind.so: history.h +callback.so: rlconf.h +callback.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +callback.so: readline.h keymaps.h chardefs.h tilde.h +complete.so: ansi_stdlib.h posixdir.h posixstat.h +complete.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +complete.so: readline.h keymaps.h chardefs.h tilde.h +display.so: ansi_stdlib.h posixstat.h +display.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +display.so: tcap.h +display.so: readline.h keymaps.h chardefs.h tilde.h +display.so: history.h +funmap.so: readline.h keymaps.h chardefs.h tilde.h +funmap.so: rlconf.h ansi_stdlib.h +funmap.so: ${BUILD_DIR}/config.h +histexpand.so: ansi_stdlib.h +histexpand.so: history.h histlib.h +histexpand.so: ${BUILD_DIR}/config.h +histfile.so: ansi_stdlib.h +histfile.so: history.h histlib.h +histfile.so: ${BUILD_DIR}/config.h +history.so: ansi_stdlib.h +history.so: history.h histlib.h +history.so: ${BUILD_DIR}/config.h +histsearch.so: ansi_stdlib.h +histsearch.so: history.h histlib.h +histsearch.so: ${BUILD_DIR}/config.h +input.so: ansi_stdlib.h +input.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +input.so: readline.h keymaps.h chardefs.h tilde.h +isearch.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +isearch.so: readline.h keymaps.h chardefs.h tilde.h +isearch.so: ansi_stdlib.h history.h +keymaps.so: emacs_keymap.c vi_keymap.c +keymaps.so: keymaps.h chardefs.h rlconf.h ansi_stdlib.h +keymaps.so: readline.h keymaps.h chardefs.h tilde.h +keymaps.so: ${BUILD_DIR}/config.h +kill.so: ansi_stdlib.h +kill.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +kill.so: readline.h keymaps.h chardefs.h tilde.h +kill.so: history.h +macro.so: ansi_stdlib.h +macro.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +macro.so: readline.h keymaps.h chardefs.h tilde.h +macro.so: history.h +nls.so: ansi_stdlib.h +nls.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +parens.so: rlconf.h +parens.so: ${BUILD_DIR}/config.h +parens.so: readline.h keymaps.h chardefs.h tilde.h +readline.so: readline.h keymaps.h chardefs.h tilde.h +readline.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +readline.so: history.h +readline.so: posixstat.h ansi_stdlib.h posixjmp.h +rltty.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +rltty.so: rltty.h +rltty.so: readline.h keymaps.h chardefs.h tilde.h +search.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +search.so: readline.h keymaps.h chardefs.h tilde.h +search.so: ansi_stdlib.h history.h +signals.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +signals.so: readline.h keymaps.h chardefs.h tilde.h +signals.so: history.h +terminal.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +terminal.so: tcap.h +terminal.so: readline.h keymaps.h chardefs.h tilde.h +terminal.so: history.h +tilde.so: ansi_stdlib.h +tilde.so: ${BUILD_DIR}/config.h +tilde.so: tilde.h +undo.so: ansi_stdlib.h +undo.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +undo.so: readline.h keymaps.h chardefs.h tilde.h +undo.so: history.h +util.so: posixjmp.h ansi_stdlib.h +util.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +util.so: readline.h keymaps.h chardefs.h tilde.h +vi_mode.so: rldefs.h ${BUILD_DIR}/config.h rlconf.h +vi_mode.so: readline.h keymaps.h chardefs.h tilde.h +vi_mode.so: history.h ansi_stdlib.h +xmalloc.so: ${BUILD_DIR}/config.h +xmalloc.so: ansi_stdlib.h + +readline.o: readline.c +vi_mode.o: vi_mode.c +funmap.o: funmap.c +keymaps.o: keymaps.c +parens.o: parens.c +search.o: search.c +rltty.o: rltty.c +complete.o: complete.c +bind.o: bind.c +isearch.o: isearch.c +display.o: display.c +signals.o: signals.c +util.o: util.c +kill.o: kill.c +undo.o: undo.c +macro.o: macro.c +input.o: input.c +callback.o: callback.c +terminal.o: terminal.c +nls.o: nls.c +xmalloc.o: xmalloc.c +history.o: history.c +histexpand.o: histexpand.c +histfile.o: histfile.c +histsearch.o: histsearch.c +shell.o: shell.c +tilde.o: tilde.c + +readline.so: $(srcdir)/readline.c +vi_mode.so: $(srcdir)/vi_mode.c +funmap.so: $(srcdir)/funmap.c +keymaps.so: $(srcdir)/keymaps.c +parens.so: $(srcdir)/parens.c +search.so: $(srcdir)/search.c +rltty.so: $(srcdir)/rltty.c +complete.so: $(srcdir)/complete.c +bind.so: $(srcdir)/bind.c +isearch.so: $(srcdir)/isearch.c +display.so: $(srcdir)/display.c +signals.so: $(srcdir)/signals.c +util.so: $(srcdir)/util.c +kill.so: $(srcdir)/kill.c +undo.so: $(srcdir)/undo.c +macro.so: $(srcdir)/macro.c +input.so: $(srcdir)/input.c +callback.so: $(srcdir)/callback.c +terminal.so: $(srcdir)/terminal.c +nls.so: $(srcdir)/nls.c +xmalloc.so: $(srcdir)/xmalloc.c +history.so: $(srcdir)/history.c +histexpand.so: $(srcdir)/histexpand.c +histfile.so: $(srcdir)/histfile.c +histsearch.so: $(srcdir)/histsearch.c +shell.so: $(srcdir)/shell.c +tilde.so: $(srcdir)/tilde.c + +readline.so: readline.c +vi_mode.so: vi_mode.c +funmap.so: funmap.c +keymaps.so: keymaps.c +parens.so: parens.c +search.so: search.c +rltty.so: rltty.c +complete.so: complete.c +bind.so: bind.c +isearch.so: isearch.c +display.so: display.c +signals.so: signals.c +util.so: util.c +kill.so: kill.c +undo.so: undo.c +macro.so: macro.c +input.so: input.c +callback.so: callback.c +terminal.so: terminal.c +nls.so: nls.c +xmalloc.so: xmalloc.c +history.so: history.c +histexpand.so: histexpand.c +histfile.so: histfile.c +histsearch.so: histsearch.c +shell.so: shell.c +tilde.so: tilde.c diff --git a/readline/README b/readline/README new file mode 100644 index 00000000000..f19f92560a5 --- /dev/null +++ b/readline/README @@ -0,0 +1,112 @@ +Introduction +============ + +This is the Gnu Readline library, version 2.2 + +The Readline library provides a set of functions for use by applications +that allow users to edit command lines as they are typed in. Both +Emacs and vi editing modes are available. The Readline library includes +additional functions to maintain a list of previously-entered command +lines, to recall and perhaps reedit those lines, and perform csh-like +history expansion on previous commands. + +The history facilites are also placed into a separate library, the +History library, as part of the build process. The History library +may be used without Readline in applications which desire its +capabilities. + +The Readline library is free software, distributed under the terms of +the GNU Public License, version 2. For more information, see the file +COPYING. + +To build the library, try typing `./configure', then `make'. The +configuration process is automated, so no further intervention should +be necessary. Readline builds with `gcc' by default if it is +available. If you want to use `cc' instead, type + + CC=cc ./configure + +if you are using a Bourne-style shell. If you are not, the following +may work: + + env CC=cc ./configure + +Read the file INSTALL in this directory for more information about how +to customize and control the build process. + +The file rlconf.h contains defines that enable and disable certain +Readline features. + +Examples +======== + +There are several example programs that use Readline features in the +examples directory. The `rl' program is of particular interest. It +is a command-line interface to Readline, suitable for use in shell +scripts in place of `read'. + +Shared Libraries +================ + +There is skeletal support for building shared versions of the +Readline and History libraries. + +Typing `make shared' will cause shared versions of the Readline and +History libraries to be built on SunOS 4.1.x. For versions of Unix +other than SunOS, you will have to make some changes to Makefile.in. +The relevant variables are: + +PICFLAG Options to give to the compiler to produce position-independent + code. The value `-fpic' works for most versions of gcc. +SHLIB_OPTS Options to give to the linker to produce a shared library. + The value `-assert pure-text -ldl' works on SunOS 4.1.x. + The value `-Bshareable' works for some versions of GNU ld. + +MAJOR The major version number of the shared library. You should + not need to change this. +MINOR The minor version number of the shared library. Some systems, + such as SVR4 and its descendents (e.g., Solaris, Unixware), + do not use minor version numbers. For those systems, this + variable should be left unset. + +LD The linker. The value of `ld' is correct for SunOS 4.1.x. + You may need to change it to `gcc'; make sure to change + SHLIB_OPTS if you do so. + +Once you have edited Makefile.in, type `make Makefile' to rebuild the +Makefile, then `make shared' to build the shared libraries. + +Documentation +============= + +The documentation for the Readline and History libraries appears in the +`doc' subdirectory. There are two texinfo files and a Unix-style manual +page describing the programming facilities available in the Readline +library. The texinfo files include both user and programmer's manuals. + +Reporting Bugs +============== + +Bug reports for Readline should be sent to: + + bug-readline@gnu.org + +When reporting a bug, please include the following information: + + * the version number and release status of Readline (e.g., 2.2-release) + * the machine and OS that it is running on + * a list of the compilation flags or the contents of `config.h', if + appropriate + * a description of the bug + * a recipe for recreating the bug reliably + * a fix for the bug if you have one! + +If you would like to contact the Readline maintainer directly, send mail +to bash-maintainers@gnu.org. + +Since Readline is developed along with bash, the bug-bash@gnu.org mailing +list (mirrored to the Usenet newsgroup gnu.bash.bug) often contains +Readline bug reports and fixes. + +Chet Ramey +chet@po.cwru.edu diff --git a/readline/acconfig.h b/readline/acconfig.h new file mode 100644 index 00000000000..b41ac519285 --- /dev/null +++ b/readline/acconfig.h @@ -0,0 +1,56 @@ +/* acconfig.h + This file is in the public domain. + + Descriptive text for the C preprocessor macros that + the distributed Autoconf macros can define. + No software package will use all of them; autoheader copies the ones + your configure.in uses into your configuration header file templates. + + The entries are in sort -df order: alphabetical, case insensitive, + ignoring punctuation (such as underscores). Although this order + can split up related entries, it makes it easier to check whether + a given entry is in the file. + + Leave the following blank line there!! Autoheader needs it. */ + + +/* Definitions pulled in from aclocal.m4. */ +#undef VOID_SIGHANDLER + +#undef TIOCGWINSZ_IN_SYS_IOCTL + +#undef TIOCSTAT_IN_SYS_IOCTL + +#undef HAVE_GETPW_DECLS + +#undef FIONREAD_IN_SYS_IOCTL + +#undef HAVE_BSD_SIGNALS + +#undef HAVE_LSTAT + +#undef HAVE_POSIX_SIGNALS + +#undef HAVE_POSIX_SIGSETJMP + +#undef HAVE_USG_SIGHOLD + +#undef MUST_REINSTALL_SIGHANDLERS + +#undef SPEED_T_IN_SYS_TYPES + +#undef STRCOLL_BROKEN + +#undef STRUCT_DIRENT_HAS_D_FILENO + +#undef STRUCT_DIRENT_HAS_D_INO + +#undef STRUCT_WINSIZE_IN_SYS_IOCTL + +#undef STRUCT_WINSIZE_IN_TERMIOS + + +/* Leave that blank line there!! Autoheader needs it. + If you're adding to this file, keep in mind: + The entries are in sort -df order: alphabetical, case insensitive, + ignoring punctuation (such as underscores). */ diff --git a/readline/aclocal.m4 b/readline/aclocal.m4 new file mode 100644 index 00000000000..822ead0ee84 --- /dev/null +++ b/readline/aclocal.m4 @@ -0,0 +1,1344 @@ +dnl +dnl Bash specific tests +dnl +dnl Some derived from PDKSH 5.1.3 autoconf tests +dnl +dnl +dnl Check if dup2() does not clear the close on exec flag +dnl +AC_DEFUN(BASH_DUP2_CLOEXEC_CHECK, +[AC_MSG_CHECKING(if dup2 fails to clear the close-on-exec flag) +AC_CACHE_VAL(bash_cv_dup2_broken, +[AC_TRY_RUN([ +#include <sys/types.h> +#include <fcntl.h> +main() +{ + int fd1, fd2, fl; + fd1 = open("/dev/null", 2); + if (fcntl(fd1, 2, 1) < 0) + exit(1); + fd2 = dup2(fd1, 1); + if (fd2 < 0) + exit(2); + fl = fcntl(fd2, 1, 0); + /* fl will be 1 if dup2 did not reset the close-on-exec flag. */ + exit(fl != 1); +} +], bash_cv_dup2_broken=yes, bash_cv_dup2_broken=no, + [AC_MSG_ERROR(cannot check dup2 if cross compiling -- defaulting to no) + bash_cv_dup2_broken=no]) +]) +AC_MSG_RESULT($bash_cv_dup2_broken) +if test $bash_cv_dup2_broken = yes; then +AC_DEFINE(DUP2_BROKEN) +fi +]) + +dnl Check type of signal routines (posix, 4.2bsd, 4.1bsd or v7) +AC_DEFUN(BASH_SIGNAL_CHECK, +[AC_REQUIRE([AC_TYPE_SIGNAL]) +AC_MSG_CHECKING(for type of signal functions) +AC_CACHE_VAL(bash_cv_signal_vintage, +[ + AC_TRY_LINK([#include <signal.h>],[ + sigset_t ss; + struct sigaction sa; + sigemptyset(&ss); sigsuspend(&ss); + sigaction(SIGINT, &sa, (struct sigaction *) 0); + sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); + ], bash_cv_signal_vintage=posix, + [ + AC_TRY_LINK([#include <signal.h>], [ + int mask = sigmask(SIGINT); + sigsetmask(mask); sigblock(mask); sigpause(mask); + ], bash_cv_signal_vintage=4.2bsd, + [ + AC_TRY_LINK([ + #include <signal.h> + RETSIGTYPE foo() { }], [ + int mask = sigmask(SIGINT); + sigset(SIGINT, foo); sigrelse(SIGINT); + sighold(SIGINT); sigpause(SIGINT); + ], bash_cv_signal_vintage=svr3, bash_cv_signal_vintage=v7 + )] + )] +) +]) +AC_MSG_RESULT($bash_cv_signal_vintage) +if test "$bash_cv_signal_vintage" = posix; then +AC_DEFINE(HAVE_POSIX_SIGNALS) +elif test "$bash_cv_signal_vintage" = "4.2bsd"; then +AC_DEFINE(HAVE_BSD_SIGNALS) +elif test "$bash_cv_signal_vintage" = svr3; then +AC_DEFINE(HAVE_USG_SIGHOLD) +fi +]) + +dnl Check if the pgrp of setpgrp() can't be the pid of a zombie process. +AC_DEFUN(BASH_PGRP_SYNC, +[AC_REQUIRE([AC_FUNC_GETPGRP]) +AC_MSG_CHECKING(whether pgrps need synchronization) +AC_CACHE_VAL(bash_cv_pgrp_pipe, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif +main() +{ +# ifdef GETPGRP_VOID +# define getpgID() getpgrp() +# else +# define getpgID() getpgrp(0) +# define setpgid(x,y) setpgrp(x,y) +# endif + int pid1, pid2, fds[2]; + int status; + char ok; + + switch (pid1 = fork()) { + case -1: + exit(1); + case 0: + setpgid(0, getpid()); + exit(0); + } + setpgid(pid1, pid1); + + sleep(2); /* let first child die */ + + if (pipe(fds) < 0) + exit(2); + + switch (pid2 = fork()) { + case -1: + exit(3); + case 0: + setpgid(0, pid1); + ok = getpgID() == pid1; + write(fds[1], &ok, 1); + exit(0); + } + setpgid(pid2, pid1); + + close(fds[1]); + if (read(fds[0], &ok, 1) != 1) + exit(4); + wait(&status); + wait(&status); + exit(ok ? 0 : 5); +} +], bash_cv_pgrp_pipe=no,bash_cv_pgrp_pipe=yes, + [AC_MSG_ERROR(cannot check pgrp synchronization if cross compiling -- defaulting to no) + bash_cv_pgrp_pipe=no]) +]) +AC_MSG_RESULT($bash_cv_pgrp_pipe) +if test $bash_cv_pgrp_pipe = yes; then +AC_DEFINE(PGRP_PIPE) +fi +]) + +dnl +dnl check for typedef'd symbols in header files, but allow the caller to +dnl specify the include files to be checked in addition to the default +dnl +dnl BASH_CHECK_TYPE(TYPE, HEADERS, DEFAULT[, VALUE-IF-FOUND]) +AC_DEFUN(BASH_CHECK_TYPE, +[AC_REQUIRE([AC_HEADER_STDC])dnl +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(bash_cv_type_$1, +[AC_EGREP_CPP($1, [#include <sys/types.h> +#if STDC_HEADERS +#include <stdlib.h> +#endif +$2 +], bash_cv_type_$1=yes, bash_cv_type_$1=no)]) +AC_MSG_RESULT($bash_cv_type_$1) +ifelse($#, 4, [if test $bash_cv_type_$1 = yes; then + AC_DEFINE($4) + fi]) +if test $bash_cv_type_$1 = no; then + AC_DEFINE($1, $3) +fi +]) + +dnl +dnl Type of struct rlimit fields: some systems (OSF/1, NetBSD, RISC/os 5.0) +dnl have a rlim_t, others (4.4BSD based systems) use quad_t, others use +dnl long and still others use int (HP-UX 9.01, SunOS 4.1.3). To simplify +dnl matters, this just checks for rlim_t, quad_t, or long. +dnl +AC_DEFUN(BASH_RLIMIT_TYPE, +[AC_MSG_CHECKING(for size and type of struct rlimit fields) +AC_CACHE_VAL(bash_cv_type_rlimit, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/resource.h>], +[rlim_t xxx;], bash_cv_type_rlimit=rlim_t,[ +AC_TRY_RUN([ +#include <sys/types.h> +#include <sys/time.h> +#include <sys/resource.h> +main() +{ +#ifdef HAVE_QUAD_T + struct rlimit rl; + if (sizeof(rl.rlim_cur) == sizeof(quad_t)) + exit(0); +#endif + exit(1); +}], bash_cv_type_rlimit=quad_t, bash_cv_type_rlimit=long, + [AC_MSG_ERROR(cannot check quad_t if cross compiling -- defaulting to long) + bash_cv_type_rlimit=long])]) +]) +AC_MSG_RESULT($bash_cv_type_rlimit) +if test $bash_cv_type_rlimit = quad_t; then +AC_DEFINE(RLIMTYPE, quad_t) +elif test $bash_cv_type_rlimit = rlim_t; then +AC_DEFINE(RLIMTYPE, rlim_t) +fi +]) + +dnl +dnl Check for sys_siglist[] or _sys_siglist[] +dnl +AC_DEFUN(BASH_DECL_UNDER_SYS_SIGLIST, +[AC_MSG_CHECKING([for _sys_siglist in signal.h or unistd.h]) +AC_CACHE_VAL(bash_cv_decl_under_sys_siglist, +[AC_TRY_COMPILE([ +#include <sys/types.h> +#include <signal.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif], [ char *msg = _sys_siglist[2]; ], + bash_cv_decl_under_sys_siglist=yes, bash_cv_decl_under_sys_siglist=no, + [AC_MSG_ERROR(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)])])dnl +AC_MSG_RESULT($bash_cv_decl_under_sys_siglist) +if test $bash_cv_decl_under_sys_siglist = yes; then +AC_DEFINE(UNDER_SYS_SIGLIST_DECLARED) +fi +]) + +AC_DEFUN(BASH_UNDER_SYS_SIGLIST, +[AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST]) +AC_MSG_CHECKING([for _sys_siglist in system C library]) +AC_CACHE_VAL(bash_cv_under_sys_siglist, +[AC_TRY_RUN([ +#include <sys/types.h> +#include <signal.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif +#ifndef UNDER_SYS_SIGLIST_DECLARED +extern char *_sys_siglist[]; +#endif +main() +{ +char *msg = (char *)_sys_siglist[2]; +exit(msg == 0); +}], + bash_cv_under_sys_siglist=yes, bash_cv_under_sys_siglist=no, + [AC_MSG_ERROR(cannot check for _sys_siglist[] if cross compiling -- defaulting to no) + bash_cv_under_sys_siglist=no])]) +AC_MSG_RESULT($bash_cv_under_sys_siglist) +if test $bash_cv_under_sys_siglist = yes; then +AC_DEFINE(HAVE_UNDER_SYS_SIGLIST) +fi +]) + +AC_DEFUN(BASH_SYS_SIGLIST, +[AC_REQUIRE([AC_DECL_SYS_SIGLIST]) +AC_MSG_CHECKING([for sys_siglist in system C library]) +AC_CACHE_VAL(bash_cv_sys_siglist, +[AC_TRY_RUN([ +#include <sys/types.h> +#include <signal.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif +#ifndef SYS_SIGLIST_DECLARED +extern char *sys_siglist[]; +#endif +main() +{ +char *msg = sys_siglist[2]; +exit(msg == 0); +}], + bash_cv_sys_siglist=yes, bash_cv_sys_siglist=no, + [AC_MSG_ERROR(cannot check for sys_siglist if cross compiling -- defaulting to no) + bash_cv_sys_siglist=no])]) +AC_MSG_RESULT($bash_cv_sys_siglist) +if test $bash_cv_sys_siglist = yes; then +AC_DEFINE(HAVE_SYS_SIGLIST) +fi +]) + +dnl Check for sys_errlist[] and sys_nerr, check for declaration +AC_DEFUN(BASH_SYS_ERRLIST, +[AC_MSG_CHECKING([for sys_errlist and sys_nerr]) +AC_CACHE_VAL(bash_cv_sys_errlist, +[AC_TRY_LINK([#include <errno.h>], +[extern char *sys_errlist[]; + extern int sys_nerr; + char *msg = sys_errlist[sys_nerr - 1];], + bash_cv_sys_errlist=yes, bash_cv_sys_errlist=no)])dnl +AC_MSG_RESULT($bash_cv_sys_errlist) +if test $bash_cv_sys_errlist = yes; then +AC_DEFINE(HAVE_SYS_ERRLIST) +fi +]) + +dnl Check to see if opendir will open non-directories (not a nice thing) +AC_DEFUN(BASH_FUNC_OPENDIR_CHECK, +[AC_REQUIRE([AC_HEADER_DIRENT])dnl +AC_MSG_CHECKING(if opendir() opens non-directories) +AC_CACHE_VAL(bash_cv_opendir_not_robust, +[AC_TRY_RUN([ +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include <dirent.h> +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include <sys/ndir.h> +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include <sys/dir.h> +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include <ndir.h> +# endif +#endif /* HAVE_DIRENT_H */ +main() +{ +DIR *dir; +int fd; +unlink("/tmp/not_a_directory"); +fd = open("/tmp/not_a_directory", O_WRONLY|O_CREAT, 0666); +write(fd, "\n", 1); +close(fd); +dir = opendir("/tmp/not_a_directory"); +unlink("/tmp/not_a_directory"); +exit (dir == 0); +}], bash_cv_opendir_not_robust=yes,bash_cv_opendir_not_robust=no, + [AC_MSG_ERROR(cannot check opendir if cross compiling -- defaulting to no) + bash_cv_opendir_not_robust=no] +)]) +AC_MSG_RESULT($bash_cv_opendir_not_robust) +if test $bash_cv_opendir_not_robust = yes; then +AC_DEFINE(OPENDIR_NOT_ROBUST) +fi +]) + +dnl +AC_DEFUN(BASH_TYPE_SIGHANDLER, +[AC_MSG_CHECKING([whether signal handlers are of type void]) +AC_CACHE_VAL(bash_cv_void_sighandler, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <signal.h> +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" +#endif +void (*signal ()) ();], +[int i;], bash_cv_void_sighandler=yes, bash_cv_void_sighandler=no)])dnl +AC_MSG_RESULT($bash_cv_void_sighandler) +if test $bash_cv_void_sighandler = yes; then +AC_DEFINE(VOID_SIGHANDLER) +fi +]) + +AC_DEFUN(BASH_TYPE_INT32_T, +[ +if test "X$bash_cv_type_int32_t" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which builtin C type is 32 bits wide) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_type_int32_t, +[AC_TRY_RUN([ +main() +{ +#if SIZEOF_INT == 4 +exit (0); +#else +# if SIZEOF_LONG == 4 +exit (1); +# else +# error cannot find 32 bit type... +# endif +#endif +}], bash_cv_type_int32_t=int, bash_cv_type_int32_t=long, + [AC_MSG_ERROR(cannot check type sizes if cross-compiling -- defaulting to int) + bash_cv_type_int32_t=int] +)]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which builtin C type is 32 bits wide) +fi +AC_MSG_RESULT($bash_cv_type_int32_t); +if test "$bash_cv_type_int32_t" = "int"; then +AC_DEFINE(int32_t, int) +else +AC_DEFINE(int32_t, long) +fi +]) + +AC_DEFUN(BASH_TYPE_U_INT32_T, +[ +if test "X$bash_cv_type_u_int32_t" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which unsigned builtin C type is 32 bits wide) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_type_u_int32_t, +[AC_TRY_RUN([ +main() +{ +#if SIZEOF_INT == 4 +exit (0); +#else +# if SIZEOF_LONG == 4 +exit (1); +# else +# error cannot find 32 bit type... +# endif +#endif +}], bash_cv_type_u_int32_t=int, bash_cv_type_u_int32_t=long, + [AC_MSG_ERROR(cannot check type sizes if cross-compiling -- defaulting to int) + bash_cv_type_u_int32_t=int] +)]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which unsigned builtin C type is 32 bits wide) +fi +AC_MSG_RESULT($bash_cv_type_u_int32_t); +if test "$bash_cv_type_u_int32_t" = "int"; then +AC_DEFINE(u_int32_t, unsigned int) +else +AC_DEFINE(u_int32_t, unsigned long) +fi +]) + +AC_DEFUN(BASH_TYPE_PTRDIFF_T, +[ +if test "X$bash_cv_type_ptrdiff_t" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which builtin C type is correct for ptrdiff_t) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_type_ptrdiff_t, +[AC_TRY_RUN([ +main() +{ +#if SIZEOF_CHAR_P == SIZEOF_INT +exit (0); +#else +# if SIZEOF_CHAR_P == SIZEOF_LONG +exit (1); +# else +# error cannot find type for pointer arithmetic... +# endif +#endif +}], bash_cv_type_ptrdiff_t=int, bash_cv_type_ptrdiff_t=long, + [AC_MSG_ERROR(cannot check type sizes if cross-compiling -- defaulting to int) + bash_cv_type_ptrdiff_t=int] +)]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which builtin C type is correct for ptrdiff_t) +fi +AC_MSG_RESULT($bash_cv_type_ptrdiff_t); +if test "$bash_cv_type_ptrdiff_t" = "int"; then +AC_DEFINE(ptrdiff_t, int) +else +AC_DEFINE(ptrdiff_t, long) +fi +]) + +AC_DEFUN(BASH_FUNC_STRSIGNAL, +[AC_MSG_CHECKING([for the existence of strsignal]) +AC_CACHE_VAL(bash_cv_have_strsignal, +[AC_TRY_LINK([#include <sys/types.h> +#include <signal.h>], +[char *s = (char *)strsignal(2);], + bash_cv_have_strsignal=yes, bash_cv_have_strsignal=no)]) +AC_MSG_RESULT($bash_cv_have_strsignal) +if test $bash_cv_have_strsignal = yes; then +AC_DEFINE(HAVE_STRSIGNAL) +fi +]) + +AC_DEFUN(BASH_FUNC_LSTAT, +[dnl Cannot use AC_CHECK_FUNCS(lstat) because Linux defines lstat() as an +dnl inline function in <sys/stat.h>. +AC_CACHE_CHECK([for lstat], bash_cv_func_lstat, +[AC_TRY_LINK([ +#include <sys/types.h> +#include <sys/stat.h> +],[ lstat(".",(struct stat *)0); ], +bash_cv_func_lstat=yes, bash_cv_func_lstat=no)]) +if test $bash_cv_func_lstat = yes; then + AC_DEFINE(HAVE_LSTAT) +fi +]) + +AC_DEFUN(BASH_STRUCT_TERMIOS_LDISC, +[AC_MSG_CHECKING([for a c_line member of struct termios]) +AC_CACHE_VAL(bash_cv_termios_ldisc, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <termios.h>],[struct termios t; int i; i = t.c_line;], + bash_cv_termios_ldisc=yes, bash_cv_termios_ldisc=no)])dnl +AC_MSG_RESULT($bash_cv_termios_ldisc) +if test $bash_cv_termios_ldisc = yes; then +AC_DEFINE(TERMIOS_LDISC) +fi +]) + +AC_DEFUN(BASH_STRUCT_TERMIO_LDISC, +[AC_MSG_CHECKING([for a c_line member of struct termio]) +AC_CACHE_VAL(bash_cv_termio_ldisc, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <termio.h>],[struct termio t; int i; i = t.c_line;], + bash_cv_termio_ldisc=yes, bash_cv_termio_ldisc=no)])dnl +AC_MSG_RESULT($bash_cv_termio_ldisc) +if test $bash_cv_termio_ldisc = yes; then +AC_DEFINE(TERMIO_LDISC) +fi +]) + +AC_DEFUN(BASH_FUNC_GETENV, +[AC_MSG_CHECKING(to see if getenv can be redefined) +AC_CACHE_VAL(bash_cv_getenv_redef, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif +#ifndef __STDC__ +# ifndef const +# define const +# endif +#endif +char * +getenv (name) +#if defined (__linux__) || defined (__bsdi__) || defined (convex) + const char *name; +#else + char const *name; +#endif /* !__linux__ && !__bsdi__ && !convex */ +{ +return "42"; +} +main() +{ +char *s; +/* The next allows this program to run, but does not allow bash to link + when it redefines getenv. I'm not really interested in figuring out + why not. */ +#if defined (NeXT) +exit(1); +#endif +s = getenv("ABCDE"); +exit(s == 0); /* force optimizer to leave getenv in */ +} +], bash_cv_getenv_redef=yes, bash_cv_getenv_redef=no, + [AC_MSG_ERROR(cannot check getenv redefinition if cross compiling -- defaulting to yes) + bash_cv_getenv_redef=yes] +)]) +AC_MSG_RESULT($bash_cv_getenv_redef) +if test $bash_cv_getenv_redef = yes; then +AC_DEFINE(CAN_REDEFINE_GETENV) +fi +]) + +AC_DEFUN(BASH_FUNC_PRINTF, +[AC_MSG_CHECKING(for declaration of printf in <stdio.h>) +AC_CACHE_VAL(bash_cv_printf_declared, +[AC_TRY_RUN([ +#include <stdio.h> +#ifdef __STDC__ +typedef int (*_bashfunc)(const char *, ...); +#else +typedef int (*_bashfunc)(); +#endif +main() +{ +_bashfunc pf; +pf = (_bashfunc) printf; +exit(pf == 0); +} +], bash_cv_printf_declared=yes, bash_cv_printf_declared=no, + [AC_MSG_ERROR(cannot check printf declaration if cross compiling -- defaulting to yes) + bash_cv_printf_declared=yes] +)]) +AC_MSG_RESULT($bash_cv_printf_declared) +if test $bash_cv_printf_declared = yes; then +AC_DEFINE(PRINTF_DECLARED) +fi +]) + +AC_DEFUN(BASH_FUNC_ULIMIT_MAXFDS, +[AC_MSG_CHECKING(whether ulimit can substitute for getdtablesize) +AC_CACHE_VAL(bash_cv_ulimit_maxfds, +[AC_TRY_RUN([ +main() +{ +long maxfds = ulimit(4, 0L); +exit (maxfds == -1L); +} +], bash_cv_ulimit_maxfds=yes, bash_cv_ulimit_maxfds=no, + [AC_MSG_ERROR(cannot check ulimit if cross compiling -- defaulting to no) + bash_cv_ulimit_maxfds=no] +)]) +AC_MSG_RESULT($bash_cv_ulimit_maxfds) +if test $bash_cv_ulimit_maxfds = yes; then +AC_DEFINE(ULIMIT_MAXFDS) +fi +]) + +AC_DEFUN(BASH_CHECK_LIB_TERMCAP, +[ +if test "X$bash_cv_termcap_lib" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which library has the termcap functions) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_termcap_lib, +[AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap, + [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses, + [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses, + bash_cv_termcap_lib=gnutermcap)])])]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which library has the termcap functions) +fi +AC_MSG_RESULT(using $bash_cv_termcap_lib) +if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then +LDFLAGS="$LDFLAGS -L./lib/termcap" +TERMCAP_LIB="./lib/termcap/libtermcap.a" +TERMCAP_DEP="./lib/termcap/libtermcap.a" +elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then +TERMCAP_LIB=-ltermcap +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libncurses; then +TERMCAP_LIB=-lncurses +TERMCAP_DEP= +else +TERMCAP_LIB=-lcurses +TERMCAP_DEP= +fi +]) + +AC_DEFUN(BASH_FUNC_GETCWD, +[AC_MSG_CHECKING([if getcwd() calls popen()]) +AC_CACHE_VAL(bash_cv_getcwd_calls_popen, +[AC_TRY_RUN([ +#include <stdio.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +#ifndef __STDC__ +#ifndef const +#define const +#endif +#endif + +int popen_called; + +FILE * +popen(command, type) + const char *command; + const char *type; +{ + popen_called = 1; + return (FILE *)NULL; +} + +FILE *_popen(command, type) + const char *command; + const char *type; +{ + return (popen (command, type)); +} + +int +pclose(stream) +FILE *stream; +{ + return 0; +} + +int +_pclose(stream) +FILE *stream; +{ + return 0; +} + +main() +{ + char lbuf[32]; + popen_called = 0; + getcwd(lbuf, 32); + exit (popen_called); +} +], bash_cv_getcwd_calls_popen=no, bash_cv_getcwd_calls_popen=yes, + [AC_MSG_ERROR(cannot check whether getcwd calls popen if cross compiling -- defaulting to no) + bash_cv_getcwd_calls_popen=no] +)]) +AC_MSG_RESULT($bash_cv_getcwd_calls_popen) +if test $bash_cv_getcwd_calls_popen = yes; then +AC_DEFINE(GETCWD_BROKEN) +fi +]) + +AC_DEFUN(BASH_STRUCT_DIRENT_D_INO, +[AC_REQUIRE([AC_HEADER_DIRENT]) +AC_MSG_CHECKING(if struct dirent has a d_ino member) +AC_CACHE_VAL(bash_cv_dirent_has_dino, +[AC_TRY_COMPILE([ +#include <stdio.h> +#include <sys/types.h> +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include <dirent.h> +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include <sys/ndir.h> +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include <sys/dir.h> +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include <ndir.h> +# endif +#endif /* HAVE_DIRENT_H */ +],[ +struct dirent d; int z; z = d.d_ino; +], bash_cv_dirent_has_dino=yes, bash_cv_dirent_has_dino=no)]) +AC_MSG_RESULT($bash_cv_dirent_has_dino) +if test $bash_cv_dirent_has_dino = yes; then +AC_DEFINE(STRUCT_DIRENT_HAS_D_INO) +fi +]) + +AC_DEFUN(BASH_STRUCT_DIRENT_D_FILENO, +[AC_REQUIRE([AC_HEADER_DIRENT]) +AC_MSG_CHECKING(if struct dirent has a d_fileno member) +AC_CACHE_VAL(bash_cv_dirent_has_d_fileno, +[AC_TRY_COMPILE([ +#include <stdio.h> +#include <sys/types.h> +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include <dirent.h> +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include <sys/ndir.h> +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include <sys/dir.h> +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include <ndir.h> +# endif +#endif /* HAVE_DIRENT_H */ +],[ +struct dirent d; int z; z = d.d_fileno; +], bash_cv_dirent_has_d_fileno=yes, bash_cv_dirent_has_d_fileno=no)]) +AC_MSG_RESULT($bash_cv_dirent_has_d_fileno) +if test $bash_cv_dirent_has_d_fileno = yes; then +AC_DEFINE(STRUCT_DIRENT_HAS_D_FILENO) +fi +]) + +AC_DEFUN(BASH_REINSTALL_SIGHANDLERS, +[AC_REQUIRE([AC_TYPE_SIGNAL]) +AC_REQUIRE([BASH_SIGNAL_CHECK]) +AC_MSG_CHECKING([if signal handlers must be reinstalled when invoked]) +AC_CACHE_VAL(bash_cv_must_reinstall_sighandlers, +[AC_TRY_RUN([ +#include <signal.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +typedef RETSIGTYPE sigfunc(); + +int nsigint; + +#ifdef HAVE_POSIX_SIGNALS +sigfunc * +set_signal_handler(sig, handler) + int sig; + sigfunc *handler; +{ + struct sigaction act, oact; + act.sa_handler = handler; + act.sa_flags = 0; + sigemptyset (&act.sa_mask); + sigemptyset (&oact.sa_mask); + sigaction (sig, &act, &oact); + return (oact.sa_handler); +} +#else +#define set_signal_handler(s, h) signal(s, h) +#endif + +RETSIGTYPE +sigint(s) +int s; +{ + nsigint++; +} + +main() +{ + nsigint = 0; + set_signal_handler(SIGINT, sigint); + kill((int)getpid(), SIGINT); + kill((int)getpid(), SIGINT); + exit(nsigint != 2); +} +], bash_cv_must_reinstall_sighandlers=no, bash_cv_must_reinstall_sighandlers=yes, + [AC_MSG_ERROR(cannot check signal handling if cross compiling -- defaulting to no) + bash_cv_must_reinstall_sighandlers=no] +)]) +AC_MSG_RESULT($bash_cv_must_reinstall_sighandlers) +if test $bash_cv_must_reinstall_sighandlers = yes; then +AC_DEFINE(MUST_REINSTALL_SIGHANDLERS) +fi +]) + +AC_DEFUN(BASH_FUNC_SBRK_DECLARED, +[AC_MSG_CHECKING(for declaration of sbrk in <unistd.h>) +AC_CACHE_VAL(bash_cv_sbrk_declared, +[AC_EGREP_HEADER(sbrk, unistd.h, + bash_cv_sbrk_declared=yes, bash_cv_sbrk_declared=no)]) +AC_MSG_RESULT($bash_cv_sbrk_declared) +if test $bash_cv_sbrk_declared = yes; then +AC_DEFINE(SBRK_DECLARED) +fi +]) + +dnl check that some necessary job control definitions are present +AC_DEFUN(BASH_JOB_CONTROL_MISSING, +[AC_REQUIRE([BASH_SIGNAL_CHECK]) +AC_MSG_CHECKING(for presence of necessary job control definitions) +AC_CACHE_VAL(bash_cv_job_control_missing, +[AC_TRY_RUN([ +#include <sys/types.h> +#ifdef HAVE_SYS_WAIT_H +#include <sys/wait.h> +#endif +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif +#include <signal.h> + +/* Add more tests in here as appropriate. */ +main() +{ +/* signal type */ +#if !defined (HAVE_POSIX_SIGNALS) && !defined (HAVE_BSD_SIGNALS) +exit(1); +#endif + +/* signals and tty control. */ +#if !defined (SIGTSTP) || !defined (SIGSTOP) || !defined (SIGCONT) +exit (1); +#endif + +/* process control */ +#if !defined (WNOHANG) || !defined (WUNTRACED) +exit(1); +#endif + +/* Posix systems have tcgetpgrp and waitpid. */ +#if defined (_POSIX_VERSION) && !defined (HAVE_TCGETPGRP) +exit(1); +#endif + +#if defined (_POSIX_VERSION) && !defined (HAVE_WAITPID) +exit(1); +#endif + +/* Other systems have TIOCSPGRP/TIOCGPRGP and wait3. */ +#if !defined (_POSIX_VERSION) && !defined (HAVE_WAIT3) +exit(1); +#endif + +exit(0); +}], bash_cv_job_control_missing=present, bash_cv_job_control_missing=missing, + [AC_MSG_ERROR(cannot check job control if cross-compiling -- defaulting to missing) + bash_cv_job_control_missing=missing] +)]) +AC_MSG_RESULT($bash_cv_job_control_missing) +if test $bash_cv_job_control_missing = missing; then +AC_DEFINE(JOB_CONTROL_MISSING) +fi +]) + +dnl check whether named pipes are present +dnl this requires a previous check for mkfifo, but that is awkward to specify +AC_DEFUN(BASH_SYS_NAMED_PIPES, +[AC_MSG_CHECKING(for presence of named pipes) +AC_CACHE_VAL(bash_cv_sys_named_pipes, +[AC_TRY_RUN([ +#include <sys/types.h> +#include <sys/stat.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +/* Add more tests in here as appropriate. */ +main() +{ +int fd; + +#if defined (HAVE_MKFIFO) +exit (0); +#endif + +#if !defined (S_IFIFO) && (defined (_POSIX_VERSION) && !defined (S_ISFIFO)) +exit (1); +#endif + +#if defined (NeXT) +exit (1); +#endif + +fd = mknod ("/tmp/sh-np-autoconf", 0666 | S_IFIFO, 0); +if (fd == -1) + exit (1); +close(fd); +unlink ("/tmp/sh-np-autoconf"); +exit(0); +}], bash_cv_sys_named_pipes=present, bash_cv_sys_named_pipes=missing, + [AC_MSG_ERROR(cannot check for named pipes if cross-compiling -- defaulting to missing) + bash_cv_sys_named_pipes=missing] +)]) +AC_MSG_RESULT($bash_cv_sys_named_pipes) +if test $bash_cv_sys_named_pipes = missing; then +AC_DEFINE(NAMED_PIPES_MISSING) +fi +]) + +AC_DEFUN(BASH_FUNC_POSIX_SETJMP, +[AC_REQUIRE([BASH_SIGNAL_CHECK]) +AC_MSG_CHECKING(for presence of POSIX-style sigsetjmp/siglongjmp) +AC_CACHE_VAL(bash_cv_func_sigsetjmp, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif +#include <sys/types.h> +#include <signal.h> +#include <setjmp.h> + +main() +{ +#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) +exit (1); +#else + +int code; +sigset_t set, oset; +sigjmp_buf xx; + +/* get the mask */ +sigemptyset(&set); +sigemptyset(&oset); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); + +/* save it */ +code = sigsetjmp(xx, 1); +if (code) + exit(0); /* could get sigmask and compare to oset here. */ + +/* change it */ +sigaddset(&set, SIGINT); +sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); + +/* and siglongjmp */ +siglongjmp(xx, 10); +exit(1); +#endif +}], bash_cv_func_sigsetjmp=present, bash_cv_func_sigsetjmp=missing, + [AC_MSG_ERROR(cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing) + bash_cv_func_sigsetjmp=missing] +)]) +AC_MSG_RESULT($bash_cv_func_sigsetjmp) +if test $bash_cv_func_sigsetjmp = present; then +AC_DEFINE(HAVE_POSIX_SIGSETJMP) +fi +]) + +AC_DEFUN(BASH_HAVE_TIOCGWINSZ, +[AC_MSG_CHECKING(for TIOCGWINSZ in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_tiocgwinsz_in_ioctl, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/ioctl.h>], [int x = TIOCGWINSZ;], + bash_cv_tiocgwinsz_in_ioctl=yes,bash_cv_tiocgwinsz_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_tiocgwinsz_in_ioctl) +if test $bash_cv_tiocgwinsz_in_ioctl = yes; then +AC_DEFINE(GWINSZ_IN_SYS_IOCTL) +fi +]) + +AC_DEFUN(BASH_STRUCT_WINSIZE, +[AC_MSG_CHECKING(for struct winsize in sys/ioctl.h and termios.h) +AC_CACHE_VAL(bash_cv_struct_winsize_header, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/ioctl.h>], [struct winsize x;], + bash_cv_struct_winsize_header=ioctl_h, + [AC_TRY_COMPILE([#include <sys/types.h> +#include <termios.h>], [struct winsize x;], + bash_cv_struct_winsize_header=termios_h, bash_cv_struct_winsize_header=other) +])]) +if test $bash_cv_struct_winsize_header = ioctl_h; then + AC_MSG_RESULT(sys/ioctl.h) + AC_DEFINE(STRUCT_WINSIZE_IN_SYS_IOCTL) +elif test $bash_cv_struct_winsize_header = termios_h; then + AC_MSG_RESULT(termios.h) + AC_DEFINE(STRUCT_WINSIZE_IN_TERMIOS) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN(BASH_HAVE_TIOCSTAT, +[AC_MSG_CHECKING(for TIOCSTAT in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_tiocstat_in_ioctl, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/ioctl.h>], [int x = TIOCSTAT;], + bash_cv_tiocstat_in_ioctl=yes,bash_cv_tiocstat_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_tiocstat_in_ioctl) +if test $bash_cv_tiocstat_in_ioctl = yes; then +AC_DEFINE(TIOCSTAT_IN_SYS_IOCTL) +fi +]) + +AC_DEFUN(BASH_HAVE_FIONREAD, +[AC_MSG_CHECKING(for FIONREAD in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_fionread_in_ioctl, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/ioctl.h>], [int x = FIONREAD;], + bash_cv_fionread_in_ioctl=yes,bash_cv_fionread_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_fionread_in_ioctl) +if test $bash_cv_fionread_in_ioctl = yes; then +AC_DEFINE(FIONREAD_IN_SYS_IOCTL) +fi +]) + +dnl +dnl See if speed_t is declared in <sys/types.h>. Some versions of linux +dnl require a definition of speed_t each time <termcap.h> is included, +dnl but you can only get speed_t if you include <termios.h> (on some +dnl versions) or <sys/types.h> (on others). +dnl +AC_DEFUN(BASH_MISC_SPEED_T, +[AC_MSG_CHECKING(for speed_t in sys/types.h) +AC_CACHE_VAL(bash_cv_speed_t_in_sys_types, +[AC_TRY_COMPILE([#include <sys/types.h>], [speed_t x;], + bash_cv_speed_t_in_sys_types=yes,bash_cv_speed_t_in_sys_types=no)]) +AC_MSG_RESULT($bash_cv_speed_t_in_sys_types) +if test $bash_cv_speed_t_in_sys_types = yes; then +AC_DEFINE(SPEED_T_IN_SYS_TYPES) +fi +]) + +AC_DEFUN(BASH_CHECK_GETPW_FUNCS, +[AC_MSG_CHECKING(whether programs are able to redeclare getpw functions) +AC_CACHE_VAL(bash_cv_can_redecl_getpw, +[AC_TRY_COMPILE([#include <sys/types.h> +#include <pwd.h> +extern struct passwd *getpwent(); +extern struct passwd *getpwuid(); +extern struct passwd *getpwnam();], +[struct passwd *z; z = getpwent(); z = getpwuid(0); z = getpwnam("root");], + bash_cv_can_redecl_getpw=yes,bash_cv_can_redecl_getpw=no)]) +AC_MSG_RESULT($bash_cv_can_redecl_getpw) +if test $bash_cv_can_redecl_getpw = no; then +AC_DEFINE(HAVE_GETPW_DECLS) +fi +]) + +AC_DEFUN(BASH_CHECK_DEV_FD, +[AC_MSG_CHECKING(whether /dev/fd is available) +AC_CACHE_VAL(bash_cv_dev_fd, +[if test -d /dev/fd && test -r /dev/fd/0; then + bash_cv_dev_fd=standard + elif test -d /proc/self/fd && test -r /proc/self/fd/0; then + bash_cv_dev_fd=whacky + else + bash_cv_dev_fd=absent + fi +]) +AC_MSG_RESULT($bash_cv_dev_fd) +if test $bash_cv_dev_fd = "standard"; then + AC_DEFINE(HAVE_DEV_FD) + AC_DEFINE(DEV_FD_PREFIX, "/dev/fd/") +elif test $bash_cv_dev_fd = "whacky"; then + AC_DEFINE(HAVE_DEV_FD) + AC_DEFINE(DEV_FD_PREFIX, "/proc/self/fd/") +fi +]) + +dnl +dnl Check for the presence of getpeername (the only networking function +dnl bash currently requires) in libsocket. If libsocket is present, +dnl check for libnsl and add it to LIBS if it's there, since most +dnl systems with libsocket require linking with libnsl as well. +dnl This should only be called if getpeername was not found in libc. +dnl +AC_DEFUN(BASH_CHECK_SOCKLIB, +[ +if test "X$bash_cv_have_socklib" = "X"; then +_bash_needmsg= +else +AC_MSG_CHECKING(for socket library) +_bash_needmsg=yes +fi +AC_CACHE_VAL(bash_cv_have_socklib, +[AC_CHECK_LIB(socket, getpeername, + bash_cv_have_socklib=yes, bash_cv_have_socklib=no, -lnsl)]) +if test "X$_bash_needmsg" = Xyes; then + AC_MSG_RESULT($bash_cv_have_socklib) + _bash_needmsg= +fi +if test $bash_cv_have_socklib = yes; then + # check for libnsl, add it to LIBS if present + if test "X$bash_cv_have_libnsl" = "X"; then + _bash_needmsg= + else + AC_MSG_CHECKING(for libnsl) + _bash_needmsg=yes + fi + AC_CACHE_VAL(bash_cv_have_libnsl, + [AC_CHECK_LIB(nsl, t_open, + bash_cv_have_libnsl=yes, bash_cv_have_libnsl=no)]) + if test "X$_bash_needmsg" = Xyes; then + AC_MSG_RESULT($bash_cv_have_libnsl) + _bash_needmsg= + fi + if test $bash_cv_have_libnsl = yes; then + LIBS="-lsocket -lnsl $LIBS" + else + LIBS="-lsocket $LIBS" + fi + AC_DEFINE(HAVE_LIBSOCKET) + AC_DEFINE(HAVE_GETPEERNAME) +fi +]) + +AC_DEFUN(BASH_DEFAULT_MAIL_DIR, +[AC_MSG_CHECKING(for default mail directory) +AC_CACHE_VAL(bash_cv_mail_dir, +[if test -d /var/mail; then + bash_cv_mail_dir=/var/mail + elif test -d /usr/mail; then + bash_cv_mail_dir=/usr/mail + elif test -d /var/spool/mail; then + bash_cv_mail_dir=/var/spool/mail + elif test -d /usr/spool/mail; then + bash_cv_mail_dir=/usr/spool/mail + else + bash_cv_mail_dir=unknown + fi +]) +AC_MSG_RESULT($bash_cv_mail_dir) +if test $bash_cv_mail_dir = "/var/mail"; then + AC_DEFINE(DEFAULT_MAIL_DIRECTORY, "/var/mail") +elif test $bash_cv_mail_dir = "/usr/mail"; then + AC_DEFINE(DEFAULT_MAIL_DIRECTORY, "/usr/mail") +elif test $bash_cv_mail_dir = "/var/spool/mail"; then + AC_DEFINE(DEFAULT_MAIL_DIRECTORY, "/var/spool/mail") +elif test $bash_cv_mail_dir = "/usr/spool/mail"; then + AC_DEFINE(DEFAULT_MAIL_DIRECTORY, "/usr/spool/mail") +else + AC_DEFINE(DEFAULT_MAIL_DIRECTORY, "unknown") +fi +]) + +dnl +dnl Check if HPUX needs _KERNEL defined for RLIMIT_* definitions +dnl +AC_DEFUN(BASH_KERNEL_RLIMIT_CHECK, +[AC_MSG_CHECKING([whether $host_os needs _KERNEL for RLIMIT defines]) +AC_CACHE_VAL(bash_cv_kernel_rlimit, +[AC_TRY_COMPILE([ +#include <sys/types.h> +#include <sys/resource.h> +], +[ + int f; + f = RLIMIT_DATA; +], bash_cv_kernel_rlimit=no, +[AC_TRY_COMPILE([ +#include <sys/types.h> +#define _KERNEL +#include <sys/resource.h> +#undef _KERNEL +], +[ + int f; + f = RLIMIT_DATA; +], bash_cv_kernel_rlimit=yes, bash_cv_kernel_rlimit=no)] +)]) +AC_MSG_RESULT($bash_cv_kernel_rlimit) +if test $bash_cv_kernel_rlimit = yes; then +AC_DEFINE(RLIMIT_NEEDS_KERNEL) +fi +]) + +AC_DEFUN(BASH_FUNC_STRCOLL, +[ +AC_MSG_CHECKING(whether or not strcoll and strcmp differ) +AC_CACHE_VAL(bash_cv_func_strcoll_broken, +[AC_TRY_RUN([ +#include <stdio.h> +#if defined (HAVE_LOCALE_H) +#include <locale.h> +#endif + +main(c, v) +int c; +char *v[]; +{ + int r1, r2; + char *deflocale, *defcoll; + +#ifdef HAVE_SETLOCALE + deflocale = setlocale(LC_ALL, ""); + defcoll = setlocale(LC_COLLATE, ""); +#endif + +#ifdef HAVE_STRCOLL + /* These two values are taken from tests/glob-test. */ + r1 = strcoll("abd", "aXd"); +#else + r1 = 0; +#endif + r2 = strcmp("abd", "aXd"); + + /* These two should both be greater than 0. It is permissible for + a system to return different values, as long as the sign is the + same. */ + + /* Exit with 1 (failure) if these two values are both > 0, since + this tests whether strcoll(3) is broken with respect to strcmp(3) + in the default locale. */ + exit (r1 > 0 && r2 > 0); +} +], bash_cv_func_strcoll_broken=yes, bash_cv_func_strcoll_broken=no, + [AC_MSG_ERROR(cannot check strcoll if cross compiling -- defaulting to no) + bash_cv_func_strcoll_broken=no] +)]) +AC_MSG_RESULT($bash_cv_func_strcoll_broken) +if test $bash_cv_func_strcoll_broken = yes; then +AC_DEFINE(STRCOLL_BROKEN) +fi +]) + +dnl +dnl If available, use support for large files unless the user specified +dnl one of the CPPFLAGS, LDFLAGS, or LIBS variables (<eggert@twinsun.com> +dnl via GNU patch 2.5) +dnl +AC_DEFUN(BASH_LARGE_FILE_SUPPORT, +[AC_MSG_CHECKING(whether large file support needs explicit enabling) +ac_getconfs='' +ac_result=yes +ac_set='' +ac_shellvars='CPPFLAGS LDFLAGS LIBS' +for ac_shellvar in $ac_shellvars; do + case $ac_shellvar in + CPPFLAGS) ac_lfsvar=LFS_CFLAGS ac_lfs64var=LFS64_CFLAGS ;; + *) ac_lfsvar=LFS_$ac_shellvar ac_lfs64var=LFS64_$ac_shellvar ;; + esac + eval test '"${'$ac_shellvar'+set}"' = set && ac_set=$ac_shellvar + (getconf $ac_lfsvar) >/dev/null 2>&1 || { ac_result=no; break; } + ac_getconf=`getconf $ac_lfsvar` + ac_getconf64=`getconf $ac_lfs64var` + ac_getconfs=$ac_getconfs$ac_getconf\ $ac_getconf64 + eval ac_test_$ac_shellvar="\$ac_getconf\ \$ac_getconf64" +done +case "$ac_result$ac_getconfs" in +yes) ac_result=no ;; +esac +case "$ac_result$ac_set" in +yes?*) ac_result="yes, but $ac_set is already set, so use its settings" +esac +AC_MSG_RESULT($ac_result) +case $ac_result in +yes) + for ac_shellvar in $ac_shellvars; do + eval $ac_shellvar=\$ac_test_$ac_shellvar + done ;; +esac +]) + +dnl +dnl AC_SYS_RESTARTABLE_SYSCALLS tests only for restarted system calls +dnl after a signal handler has been installed with signal(). Since +dnl Bash uses sigaction() if it is available, we need to check whether +dnl or not a signal handler installed with sigaction and SA_RESTART +dnl causes system calls to be restarted after the signal is caught +dnl +AC_DEFUN(BASH_SYS_RESTARTABLE_SYSCALLS, +[AC_REQUIRE([BASH_SIGNAL_CHECK]) +AC_CACHE_CHECK(for restartable system calls with posix sigaction, +bash_cv_sys_restartable_syscalls, +[AC_TRY_RUN( +[/* Exit 0 (true) if wait returns something other than -1, + i.e. the pid of the child, which means that wait was restarted + after getting the signal. */ +#include <sys/types.h> +#include <signal.h> +static int caught = 0; +void ucatch (isig) int isig; { caught = 1; } +main () +{ +#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) + exit (1); +#else + struct sigaction act, oact; + int i, status; + + act.sa_handler = ucatch; + /* Might want to add SA_RESTART here, but bash's set_signal_handler + does not. */ + act.sa_flags = 0; + sigemptyset(&act.sa_mask); + sigemptyset(&oact.sa_mask); + i = fork (); + /* A possible race condition here, but in practice it never happens. */ + if (i == 0) { sleep (3); kill (getppid (), SIGINT); sleep (3); exit (0); } + sigaction(SIGINT, &act, &oact); + status = wait(&i); + if (status == -1) wait(&i); + exit (status == -1); +#endif +} +], bash_cv_sys_restartable_syscalls=yes, bash_cv_sys_restartable_syscalls=no, + AC_MSG_ERROR(cannot check restartable syscalls if cross compiling)) +]) +if test $bash_cv_sys_restartable_syscalls = yes; then + AC_DEFINE(HAVE_RESTARTABLE_SYSCALLS) +fi +]) diff --git a/readline/ansi_stdlib.h b/readline/ansi_stdlib.h new file mode 100644 index 00000000000..52339da5d33 --- /dev/null +++ b/readline/ansi_stdlib.h @@ -0,0 +1,41 @@ +/* ansi_stdlib.h -- An ANSI Standard stdlib.h. */ +/* A minimal stdlib.h containing extern declarations for those functions + that bash uses. */ + +/* Copyright (C) 1993 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + Bash is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with Bash; see the file COPYING. If not, write to the Free Software + Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_STDLIB_H_) +#define _STDLIB_H_ 1 + +/* String conversion functions. */ +extern int atoi (); +extern long int atol (); + +/* Memory allocation functions. */ +extern char *malloc (); +extern char *realloc (); +extern void free (); + +/* Other miscellaneous functions. */ +extern void abort (); +extern void exit (); +extern char *getenv (); +extern void qsort (); + +#endif /* _STDLIB_H */ diff --git a/readline/bind.c b/readline/bind.c new file mode 100644 index 00000000000..300530a0781 --- /dev/null +++ b/readline/bind.c @@ -0,0 +1,1944 @@ +/* bind.c -- key binding and startup file support for the readline library. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> +#include <sys/types.h> +#include <fcntl.h> +#if defined (HAVE_SYS_FILE_H) +# include <sys/file.h> +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <signal.h> +#include <errno.h> + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#include "posixstat.h" + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +extern int _rl_horizontal_scroll_mode; +extern int _rl_mark_modified_lines; +extern int _rl_bell_preference; +extern int _rl_meta_flag; +extern int _rl_convert_meta_chars_to_ascii; +extern int _rl_output_meta_chars; +extern int _rl_complete_show_all; +extern int _rl_complete_mark_directories; +extern int _rl_print_completions_horizontally; +extern int _rl_completion_case_fold; +extern int _rl_enable_keypad; +#if defined (PAREN_MATCHING) +extern int rl_blink_matching_paren; +#endif /* PAREN_MATCHING */ +#if defined (VISIBLE_STATS) +extern int rl_visible_stats; +#endif /* VISIBLE_STATS */ +extern int rl_complete_with_tilde_expansion; +extern int rl_completion_query_items; +extern int rl_inhibit_completion; +extern char *_rl_comment_begin; + +extern int rl_explicit_arg; +extern int rl_editing_mode; +extern unsigned char _rl_parsing_conditionalized_out; +extern Keymap _rl_keymap; + +extern char *possible_control_prefixes[], *possible_meta_prefixes[]; + +/* Functions imported from funmap.c */ +extern char **rl_funmap_names (); +extern int rl_add_funmap_entry (); + +/* Functions imported from util.c */ +extern char *_rl_strindex (); + +/* Functions imported from shell.c */ +extern char *get_env_value (); + +/* Variables exported by this file. */ +Keymap rl_binding_keymap; + +/* Forward declarations */ +void rl_set_keymap_from_edit_mode (); + +static int _rl_read_init_file (); +static int glean_key_from_name (); +static int substring_member_of_array (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Binding keys */ +/* */ +/* **************************************************************** */ + +/* rl_add_defun (char *name, Function *function, int key) + Add NAME to the list of named functions. Make FUNCTION be the function + that gets called. If KEY is not -1, then bind it. */ +int +rl_add_defun (name, function, key) + char *name; + Function *function; + int key; +{ + if (key != -1) + rl_bind_key (key, function); + rl_add_funmap_entry (name, function); + return 0; +} + +/* Bind KEY to FUNCTION. Returns non-zero if KEY is out of range. */ +int +rl_bind_key (key, function) + int key; + Function *function; +{ + if (key < 0) + return (key); + + if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) + { + if (_rl_keymap[ESC].type == ISKMAP) + { + Keymap escmap; + + escmap = FUNCTION_TO_KEYMAP (_rl_keymap, ESC); + key = UNMETA (key); + escmap[key].type = ISFUNC; + escmap[key].function = function; + return (0); + } + return (key); + } + + _rl_keymap[key].type = ISFUNC; + _rl_keymap[key].function = function; + rl_binding_keymap = _rl_keymap; + return (0); +} + +/* Bind KEY to FUNCTION in MAP. Returns non-zero in case of invalid + KEY. */ +int +rl_bind_key_in_map (key, function, map) + int key; + Function *function; + Keymap map; +{ + int result; + Keymap oldmap; + + oldmap = _rl_keymap; + _rl_keymap = map; + result = rl_bind_key (key, function); + _rl_keymap = oldmap; + return (result); +} + +/* Make KEY do nothing in the currently selected keymap. + Returns non-zero in case of error. */ +int +rl_unbind_key (key) + int key; +{ + return (rl_bind_key (key, (Function *)NULL)); +} + +/* Make KEY do nothing in MAP. + Returns non-zero in case of error. */ +int +rl_unbind_key_in_map (key, map) + int key; + Keymap map; +{ + return (rl_bind_key_in_map (key, (Function *)NULL, map)); +} + +/* Unbind all keys bound to FUNCTION in MAP. */ +int +rl_unbind_function_in_map (func, map) + Function *func; + Keymap map; +{ + register int i; + + for (i = 0; i < KEYMAP_SIZE; i++) + { + if (map[i].type == ISFUNC && map[i].function == func) + map[i].function = (Function *)NULL; + } +} + +int +rl_unbind_command_in_map (command, map) + char *command; + Keymap map; +{ + Function *func; + register int i; + + func = rl_named_function (command); + if (func == 0) + return 0; + return (rl_unbind_function_in_map (func, map)); +} + +/* Bind the key sequence represented by the string KEYSEQ to + FUNCTION. This makes new keymaps as necessary. The initial + place to do bindings is in MAP. */ +int +rl_set_key (keyseq, function, map) + char *keyseq; + Function *function; + Keymap map; +{ + return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map)); +} + +/* Bind the key sequence represented by the string KEYSEQ to + the string of characters MACRO. This makes new keymaps as + necessary. The initial place to do bindings is in MAP. */ +int +rl_macro_bind (keyseq, macro, map) + char *keyseq, *macro; + Keymap map; +{ + char *macro_keys; + int macro_keys_len; + + macro_keys = (char *)xmalloc ((2 * strlen (macro)) + 1); + + if (rl_translate_keyseq (macro, macro_keys, ¯o_keys_len)) + { + free (macro_keys); + return -1; + } + rl_generic_bind (ISMACR, keyseq, macro_keys, map); + return 0; +} + +/* Bind the key sequence represented by the string KEYSEQ to + the arbitrary pointer DATA. TYPE says what kind of data is + pointed to by DATA, right now this can be a function (ISFUNC), + a macro (ISMACR), or a keymap (ISKMAP). This makes new keymaps + as necessary. The initial place to do bindings is in MAP. */ +int +rl_generic_bind (type, keyseq, data, map) + int type; + char *keyseq, *data; + Keymap map; +{ + char *keys; + int keys_len; + register int i; + + /* If no keys to bind to, exit right away. */ + if (!keyseq || !*keyseq) + { + if (type == ISMACR) + free (data); + return -1; + } + + keys = xmalloc (1 + (2 * strlen (keyseq))); + + /* Translate the ASCII representation of KEYSEQ into an array of + characters. Stuff the characters into KEYS, and the length of + KEYS into KEYS_LEN. */ + if (rl_translate_keyseq (keyseq, keys, &keys_len)) + { + free (keys); + return -1; + } + + /* Bind keys, making new keymaps as necessary. */ + for (i = 0; i < keys_len; i++) + { + int ic = (int) ((unsigned char)keys[i]); + + if (_rl_convert_meta_chars_to_ascii && META_CHAR (ic)) + { + ic = UNMETA (ic); + if (map[ESC].type == ISKMAP) + map = FUNCTION_TO_KEYMAP (map, ESC); + } + + if ((i + 1) < keys_len) + { + if (map[ic].type != ISKMAP) + { + if (map[ic].type == ISMACR) + free ((char *)map[ic].function); + + map[ic].type = ISKMAP; + map[ic].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap()); + } + map = FUNCTION_TO_KEYMAP (map, ic); + } + else + { + if (map[ic].type == ISMACR) + free ((char *)map[ic].function); + + map[ic].function = KEYMAP_TO_FUNCTION (data); + map[ic].type = type; + } + + rl_binding_keymap = map; + } + free (keys); + return 0; +} + +/* Translate the ASCII representation of SEQ, stuffing the values into ARRAY, + an array of characters. LEN gets the final length of ARRAY. Return + non-zero if there was an error parsing SEQ. */ +int +rl_translate_keyseq (seq, array, len) + char *seq, *array; + int *len; +{ + register int i, c, l, temp; + + for (i = l = 0; c = seq[i]; i++) + { + if (c == '\\') + { + c = seq[++i]; + + if (c == 0) + break; + + /* Handle \C- and \M- prefixes. */ + if ((c == 'C' || c == 'M') && seq[i + 1] == '-') + { + /* Handle special case of backwards define. */ + if (strncmp (&seq[i], "C-\\M-", 5) == 0) + { + array[l++] = ESC; + i += 5; + array[l++] = CTRL (_rl_to_upper (seq[i])); + if (seq[i] == '\0') + i--; + } + else if (c == 'M') + { + i++; + array[l++] = ESC; /* XXX */ + } + else if (c == 'C') + { + i += 2; + /* Special hack for C-?... */ + array[l++] = (seq[i] == '?') ? RUBOUT : CTRL (_rl_to_upper (seq[i])); + } + continue; + } + + /* Translate other backslash-escaped characters. These are the + same escape sequences that bash's `echo' and `printf' builtins + handle, with the addition of \d -> RUBOUT. A backslash + preceding a character that is not special is stripped. */ + switch (c) + { + case 'a': + array[l++] = '\007'; + break; + case 'b': + array[l++] = '\b'; + break; + case 'd': + array[l++] = RUBOUT; /* readline-specific */ + break; + case 'e': + array[l++] = ESC; + break; + case 'f': + array[l++] = '\f'; + break; + case 'n': + array[l++] = NEWLINE; + break; + case 'r': + array[l++] = RETURN; + break; + case 't': + array[l++] = TAB; + break; + case 'v': + array[l++] = 0x0B; + break; + case '\\': + array[l++] = '\\'; + break; + case '0': case '1': case '2': case '3': + case '4': case '5': case '6': case '7': + i++; + for (temp = 2, c -= '0'; ISOCTAL (seq[i]) && temp--; i++) + c = (c * 8) + OCTVALUE (seq[i]); + i--; /* auto-increment in for loop */ + array[l++] = c % (largest_char + 1); + break; + case 'x': + i++; + for (temp = 3, c = 0; isxdigit (seq[i]) && temp--; i++) + c = (c * 16) + HEXVALUE (seq[i]); + if (temp == 3) + c = 'x'; + i--; /* auto-increment in for loop */ + array[l++] = c % (largest_char + 1); + break; + default: /* backslashes before non-special chars just add the char */ + array[l++] = c; + break; /* the backslash is stripped */ + } + continue; + } + + array[l++] = c; + } + + *len = l; + array[l] = '\0'; + return (0); +} + +char * +rl_untranslate_keyseq (seq) + int seq; +{ + static char kseq[16]; + int i, c; + + i = 0; + c = seq; + if (META_CHAR (c)) + { + kseq[i++] = '\\'; + kseq[i++] = 'M'; + kseq[i++] = '-'; + c = UNMETA (c); + } + else if (CTRL_CHAR (c)) + { + kseq[i++] = '\\'; + kseq[i++] = 'C'; + kseq[i++] = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + else if (c == RUBOUT) + { + kseq[i++] = '\\'; + kseq[i++] = 'C'; + kseq[i++] = '-'; + c = '?'; + } + + if (c == ESC) + { + kseq[i++] = '\\'; + c = 'e'; + } + else if (c == '\\' || c == '"') + { + kseq[i++] = '\\'; + } + + kseq[i++] = (unsigned char) c; + kseq[i] = '\0'; + return kseq; +} + +static char * +_rl_untranslate_macro_value (seq) + char *seq; +{ + char *ret, *r, *s; + int c; + + r = ret = xmalloc (7 * strlen (seq) + 1); + for (s = seq; *s; s++) + { + c = *s; + if (META_CHAR (c)) + { + *r++ = '\\'; + *r++ = 'M'; + *r++ = '-'; + c = UNMETA (c); + } + else if (CTRL_CHAR (c) && c != ESC) + { + *r++ = '\\'; + *r++ = 'C'; + *r++ = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + else if (c == RUBOUT) + { + *r++ = '\\'; + *r++ = 'C'; + *r++ = '-'; + c = '?'; + } + + if (c == ESC) + { + *r++ = '\\'; + c = 'e'; + } + else if (c == '\\' || c == '"') + *r++ = '\\'; + + *r++ = (unsigned char)c; + } + *r = '\0'; + return ret; +} + +/* Return a pointer to the function that STRING represents. + If STRING doesn't have a matching function, then a NULL pointer + is returned. */ +Function * +rl_named_function (string) + char *string; +{ + register int i; + + rl_initialize_funmap (); + + for (i = 0; funmap[i]; i++) + if (_rl_stricmp (funmap[i]->name, string) == 0) + return (funmap[i]->function); + return ((Function *)NULL); +} + +/* Return the function (or macro) definition which would be invoked via + KEYSEQ if executed in MAP. If MAP is NULL, then the current keymap is + used. TYPE, if non-NULL, is a pointer to an int which will receive the + type of the object pointed to. One of ISFUNC (function), ISKMAP (keymap), + or ISMACR (macro). */ +Function * +rl_function_of_keyseq (keyseq, map, type) + char *keyseq; + Keymap map; + int *type; +{ + register int i; + + if (!map) + map = _rl_keymap; + + for (i = 0; keyseq && keyseq[i]; i++) + { + int ic = keyseq[i]; + + if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii) + { + if (map[ESC].type != ISKMAP) + { + if (type) + *type = map[ESC].type; + + return (map[ESC].function); + } + else + { + map = FUNCTION_TO_KEYMAP (map, ESC); + ic = UNMETA (ic); + } + } + + if (map[ic].type == ISKMAP) + { + /* If this is the last key in the key sequence, return the + map. */ + if (!keyseq[i + 1]) + { + if (type) + *type = ISKMAP; + + return (map[ic].function); + } + else + map = FUNCTION_TO_KEYMAP (map, ic); + } + else + { + if (type) + *type = map[ic].type; + + return (map[ic].function); + } + } + return ((Function *) NULL); +} + +/* The last key bindings file read. */ +static char *last_readline_init_file = (char *)NULL; + +/* The file we're currently reading key bindings from. */ +static char *current_readline_init_file; +static int current_readline_init_include_level; +static int current_readline_init_lineno; + +/* Read FILENAME into a locally-allocated buffer and return the buffer. + The size of the buffer is returned in *SIZEP. Returns NULL if any + errors were encountered. */ +static char * +_rl_read_file (filename, sizep) + char *filename; + size_t *sizep; +{ + struct stat finfo; + size_t file_size; + char *buffer; + int i, file; + + if ((stat (filename, &finfo) < 0) || (file = open (filename, O_RDONLY, 0666)) < 0) + return ((char *)NULL); + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { + if (file >= 0) + close (file); +#if defined (EFBIG) + errno = EFBIG; +#endif + return ((char *)NULL); + } + + /* Read the file into BUFFER. */ + buffer = (char *)xmalloc (file_size + 1); + i = read (file, buffer, file_size); + close (file); + + if (i < file_size) + { + free (buffer); + return ((char *)NULL); + } + + buffer[file_size] = '\0'; + if (sizep) + *sizep = file_size; + return (buffer); +} + +/* Re-read the current keybindings file. */ +int +rl_re_read_init_file (count, ignore) + int count, ignore; +{ + int r; + r = rl_read_init_file ((char *)NULL); + rl_set_keymap_from_edit_mode (); + return r; +} + +/* Do key bindings from a file. If FILENAME is NULL it defaults + to the first non-null filename from this list: + 1. the filename used for the previous call + 2. the value of the shell variable `INPUTRC' + 3. ~/.inputrc + If the file existed and could be opened and read, 0 is returned, + otherwise errno is returned. */ +int +rl_read_init_file (filename) + char *filename; +{ + /* Default the filename. */ + if (filename == 0) + { + filename = last_readline_init_file; + if (filename == 0) + filename = get_env_value ("INPUTRC"); + if (filename == 0) + filename = DEFAULT_INPUTRC; + } + + if (*filename == 0) + filename = DEFAULT_INPUTRC; + + return (_rl_read_init_file (filename, 0)); +} + +static int +_rl_read_init_file (filename, include_level) + char *filename; + int include_level; +{ + register int i; + char *buffer, *openname, *line, *end; + size_t file_size; + + current_readline_init_file = filename; + current_readline_init_include_level = include_level; + + openname = tilde_expand (filename); + buffer = _rl_read_file (openname, &file_size); + if (buffer == 0) + return (errno); + + if (include_level == 0 && filename != last_readline_init_file) + { + FREE (last_readline_init_file); + last_readline_init_file = savestring (filename); + } + + /* Loop over the lines in the file. Lines that start with `#' are + comments; all other lines are commands for readline initialization. */ + current_readline_init_lineno = 1; + line = buffer; + end = buffer + file_size; + while (line < end) + { + /* Find the end of this line. */ + for (i = 0; line + i != end && line[i] != '\n'; i++); + + /* Mark end of line. */ + line[i] = '\0'; + + /* Skip leading whitespace. */ + while (*line && whitespace (*line)) + { + line++; + i--; + } + + /* If the line is not a comment, then parse it. */ + if (*line && *line != '#') + rl_parse_and_bind (line); + + /* Move to the next line. */ + line += i + 1; + current_readline_init_lineno++; + } + + free (buffer); + return (0); +} + +static void +_rl_init_file_error (msg) + char *msg; +{ + fprintf (stderr, "readline: %s: line %d: %s\n", current_readline_init_file, + current_readline_init_lineno, + msg); +} + +/* **************************************************************** */ +/* */ +/* Parser Directives */ +/* */ +/* **************************************************************** */ + +/* Conditionals. */ + +/* Calling programs set this to have their argv[0]. */ +char *rl_readline_name = "other"; + +/* Stack of previous values of parsing_conditionalized_out. */ +static unsigned char *if_stack = (unsigned char *)NULL; +static int if_stack_depth; +static int if_stack_size; + +/* Push _rl_parsing_conditionalized_out, and set parser state based + on ARGS. */ +static int +parser_if (args) + char *args; +{ + register int i; + + /* Push parser state. */ + if (if_stack_depth + 1 >= if_stack_size) + { + if (!if_stack) + if_stack = (unsigned char *)xmalloc (if_stack_size = 20); + else + if_stack = (unsigned char *)xrealloc (if_stack, if_stack_size += 20); + } + if_stack[if_stack_depth++] = _rl_parsing_conditionalized_out; + + /* If parsing is turned off, then nothing can turn it back on except + for finding the matching endif. In that case, return right now. */ + if (_rl_parsing_conditionalized_out) + return 0; + + /* Isolate first argument. */ + for (i = 0; args[i] && !whitespace (args[i]); i++); + + if (args[i]) + args[i++] = '\0'; + + /* Handle "$if term=foo" and "$if mode=emacs" constructs. If this + isn't term=foo, or mode=emacs, then check to see if the first + word in ARGS is the same as the value stored in rl_readline_name. */ + if (rl_terminal_name && _rl_strnicmp (args, "term=", 5) == 0) + { + char *tem, *tname; + + /* Terminals like "aaa-60" are equivalent to "aaa". */ + tname = savestring (rl_terminal_name); + tem = strchr (tname, '-'); + if (tem) + *tem = '\0'; + + /* Test the `long' and `short' forms of the terminal name so that + if someone has a `sun-cmd' and does not want to have bindings + that will be executed if the terminal is a `sun', they can put + `$if term=sun-cmd' into their .inputrc. */ + _rl_parsing_conditionalized_out = _rl_stricmp (args + 5, tname) && + _rl_stricmp (args + 5, rl_terminal_name); + free (tname); + } +#if defined (VI_MODE) + else if (_rl_strnicmp (args, "mode=", 5) == 0) + { + int mode; + + if (_rl_stricmp (args + 5, "emacs") == 0) + mode = emacs_mode; + else if (_rl_stricmp (args + 5, "vi") == 0) + mode = vi_mode; + else + mode = no_mode; + + _rl_parsing_conditionalized_out = mode != rl_editing_mode; + } +#endif /* VI_MODE */ + /* Check to see if the first word in ARGS is the same as the + value stored in rl_readline_name. */ + else if (_rl_stricmp (args, rl_readline_name) == 0) + _rl_parsing_conditionalized_out = 0; + else + _rl_parsing_conditionalized_out = 1; + return 0; +} + +/* Invert the current parser state if there is anything on the stack. */ +static int +parser_else (args) + char *args; +{ + register int i; + + if (if_stack_depth == 0) + { + _rl_init_file_error ("$else found without matching $if"); + return 0; + } + + /* Check the previous (n - 1) levels of the stack to make sure that + we haven't previously turned off parsing. */ + for (i = 0; i < if_stack_depth - 1; i++) + if (if_stack[i] == 1) + return 0; + + /* Invert the state of parsing if at top level. */ + _rl_parsing_conditionalized_out = !_rl_parsing_conditionalized_out; + return 0; +} + +/* Terminate a conditional, popping the value of + _rl_parsing_conditionalized_out from the stack. */ +static int +parser_endif (args) + char *args; +{ + if (if_stack_depth) + _rl_parsing_conditionalized_out = if_stack[--if_stack_depth]; + else + _rl_init_file_error ("$endif without matching $if"); + return 0; +} + +static int +parser_include (args) + char *args; +{ + char *old_init_file, *e; + int old_line_number, old_include_level, r; + + if (_rl_parsing_conditionalized_out) + return (0); + + old_init_file = current_readline_init_file; + old_line_number = current_readline_init_lineno; + old_include_level = current_readline_init_include_level; + + e = strchr (args, '\n'); + if (e) + *e = '\0'; + r = _rl_read_init_file (args, old_include_level + 1); + + current_readline_init_file = old_init_file; + current_readline_init_lineno = old_line_number; + current_readline_init_include_level = old_include_level; + + return r; +} + +/* Associate textual names with actual functions. */ +static struct { + char *name; + Function *function; +} parser_directives [] = { + { "if", parser_if }, + { "endif", parser_endif }, + { "else", parser_else }, + { "include", parser_include }, + { (char *)0x0, (Function *)0x0 } +}; + +/* Handle a parser directive. STATEMENT is the line of the directive + without any leading `$'. */ +static int +handle_parser_directive (statement) + char *statement; +{ + register int i; + char *directive, *args; + + /* Isolate the actual directive. */ + + /* Skip whitespace. */ + for (i = 0; whitespace (statement[i]); i++); + + directive = &statement[i]; + + for (; statement[i] && !whitespace (statement[i]); i++); + + if (statement[i]) + statement[i++] = '\0'; + + for (; statement[i] && whitespace (statement[i]); i++); + + args = &statement[i]; + + /* Lookup the command, and act on it. */ + for (i = 0; parser_directives[i].name; i++) + if (_rl_stricmp (directive, parser_directives[i].name) == 0) + { + (*parser_directives[i].function) (args); + return (0); + } + + /* display an error message about the unknown parser directive */ + _rl_init_file_error ("unknown parser directive"); + return (1); +} + +/* Read the binding command from STRING and perform it. + A key binding command looks like: Keyname: function-name\0, + a variable binding command looks like: set variable value. + A new-style keybinding looks like "\C-x\C-x": exchange-point-and-mark. */ +int +rl_parse_and_bind (string) + char *string; +{ + char *funname, *kname; + register int c, i; + int key, equivalency; + + while (string && whitespace (*string)) + string++; + + if (!string || !*string || *string == '#') + return 0; + + /* If this is a parser directive, act on it. */ + if (*string == '$') + { + handle_parser_directive (&string[1]); + return 0; + } + + /* If we aren't supposed to be parsing right now, then we're done. */ + if (_rl_parsing_conditionalized_out) + return 0; + + i = 0; + /* If this keyname is a complex key expression surrounded by quotes, + advance to after the matching close quote. This code allows the + backslash to quote characters in the key expression. */ + if (*string == '"') + { + int passc = 0; + + for (i = 1; c = string[i]; i++) + { + if (passc) + { + passc = 0; + continue; + } + + if (c == '\\') + { + passc++; + continue; + } + + if (c == '"') + break; + } + /* If we didn't find a closing quote, abort the line. */ + if (string[i] == '\0') + { + _rl_init_file_error ("no closing `\"' in key binding"); + return 1; + } + } + + /* Advance to the colon (:) or whitespace which separates the two objects. */ + for (; (c = string[i]) && c != ':' && c != ' ' && c != '\t'; i++ ); + + equivalency = (c == ':' && string[i + 1] == '='); + + /* Mark the end of the command (or keyname). */ + if (string[i]) + string[i++] = '\0'; + + /* If doing assignment, skip the '=' sign as well. */ + if (equivalency) + string[i++] = '\0'; + + /* If this is a command to set a variable, then do that. */ + if (_rl_stricmp (string, "set") == 0) + { + char *var = string + i; + char *value; + + /* Make VAR point to start of variable name. */ + while (*var && whitespace (*var)) var++; + + /* Make value point to start of value string. */ + value = var; + while (*value && !whitespace (*value)) value++; + if (*value) + *value++ = '\0'; + while (*value && whitespace (*value)) value++; + + rl_variable_bind (var, value); + return 0; + } + + /* Skip any whitespace between keyname and funname. */ + for (; string[i] && whitespace (string[i]); i++); + funname = &string[i]; + + /* Now isolate funname. + For straight function names just look for whitespace, since + that will signify the end of the string. But this could be a + macro definition. In that case, the string is quoted, so skip + to the matching delimiter. We allow the backslash to quote the + delimiter characters in the macro body. */ + /* This code exists to allow whitespace in macro expansions, which + would otherwise be gobbled up by the next `for' loop.*/ + /* XXX - it may be desirable to allow backslash quoting only if " is + the quoted string delimiter, like the shell. */ + if (*funname == '\'' || *funname == '"') + { + int delimiter = string[i++], passc; + + for (passc = 0; c = string[i]; i++) + { + if (passc) + { + passc = 0; + continue; + } + + if (c == '\\') + { + passc = 1; + continue; + } + + if (c == delimiter) + break; + } + if (c) + i++; + } + + /* Advance to the end of the string. */ + for (; string[i] && !whitespace (string[i]); i++); + + /* No extra whitespace at the end of the string. */ + string[i] = '\0'; + + /* Handle equivalency bindings here. Make the left-hand side be exactly + whatever the right-hand evaluates to, including keymaps. */ + if (equivalency) + { + return 0; + } + + /* If this is a new-style key-binding, then do the binding with + rl_set_key (). Otherwise, let the older code deal with it. */ + if (*string == '"') + { + char *seq; + register int j, k, passc; + + seq = xmalloc (1 + strlen (string)); + for (j = 1, k = passc = 0; string[j]; j++) + { + /* Allow backslash to quote characters, but leave them in place. + This allows a string to end with a backslash quoting another + backslash, or with a backslash quoting a double quote. The + backslashes are left in place for rl_translate_keyseq (). */ + if (passc || (string[j] == '\\')) + { + seq[k++] = string[j]; + passc = !passc; + continue; + } + + if (string[j] == '"') + break; + + seq[k++] = string[j]; + } + seq[k] = '\0'; + + /* Binding macro? */ + if (*funname == '\'' || *funname == '"') + { + j = strlen (funname); + + /* Remove the delimiting quotes from each end of FUNNAME. */ + if (j && funname[j - 1] == *funname) + funname[j - 1] = '\0'; + + rl_macro_bind (seq, &funname[1], _rl_keymap); + } + else + rl_set_key (seq, rl_named_function (funname), _rl_keymap); + + free (seq); + return 0; + } + + /* Get the actual character we want to deal with. */ + kname = strrchr (string, '-'); + if (!kname) + kname = string; + else + kname++; + + key = glean_key_from_name (kname); + + /* Add in control and meta bits. */ + if (substring_member_of_array (string, possible_control_prefixes)) + key = CTRL (_rl_to_upper (key)); + + if (substring_member_of_array (string, possible_meta_prefixes)) + key = META (key); + + /* Temporary. Handle old-style keyname with macro-binding. */ + if (*funname == '\'' || *funname == '"') + { + unsigned char useq[2]; + int fl = strlen (funname); + + useq[0] = key; useq[1] = '\0'; + if (fl && funname[fl - 1] == *funname) + funname[fl - 1] = '\0'; + + rl_macro_bind (useq, &funname[1], _rl_keymap); + } +#if defined (PREFIX_META_HACK) + /* Ugly, but working hack to keep prefix-meta around. */ + else if (_rl_stricmp (funname, "prefix-meta") == 0) + { + char seq[2]; + + seq[0] = key; + seq[1] = '\0'; + rl_generic_bind (ISKMAP, seq, (char *)emacs_meta_keymap, _rl_keymap); + } +#endif /* PREFIX_META_HACK */ + else + rl_bind_key (key, rl_named_function (funname)); + return 0; +} + +/* Simple structure for boolean readline variables (i.e., those that can + have one of two values; either "On" or 1 for truth, or "Off" or 0 for + false. */ + +static struct { + char *name; + int *value; +} boolean_varlist [] = { +#if defined (PAREN_MATCHING) + { "blink-matching-paren", &rl_blink_matching_paren }, +#endif + { "completion-ignore-case", &_rl_completion_case_fold }, + { "convert-meta", &_rl_convert_meta_chars_to_ascii }, + { "disable-completion", &rl_inhibit_completion }, + { "enable-keypad", &_rl_enable_keypad }, + { "expand-tilde", &rl_complete_with_tilde_expansion }, + { "horizontal-scroll-mode", &_rl_horizontal_scroll_mode }, + { "input-meta", &_rl_meta_flag }, + { "mark-directories", &_rl_complete_mark_directories }, + { "mark-modified-lines", &_rl_mark_modified_lines }, + { "meta-flag", &_rl_meta_flag }, + { "output-meta", &_rl_output_meta_chars }, + { "print-completions-horizontally", &_rl_print_completions_horizontally }, + { "show-all-if-ambiguous", &_rl_complete_show_all }, +#if defined (VISIBLE_STATS) + { "visible-stats", &rl_visible_stats }, +#endif /* VISIBLE_STATS */ + { (char *)NULL, (int *)NULL } +}; + +int +rl_variable_bind (name, value) + char *name, *value; +{ + register int i; + + /* Check for simple variables first. */ + for (i = 0; boolean_varlist[i].name; i++) + { + if (_rl_stricmp (name, boolean_varlist[i].name) == 0) + { + /* A variable is TRUE if the "value" is "on", "1" or "". */ + *boolean_varlist[i].value = *value == 0 || + _rl_stricmp (value, "on") == 0 || + (value[0] == '1' && value[1] == '\0'); + return 0; + } + } + + /* Not a boolean variable, so check for specials. */ + + /* Editing mode change? */ + if (_rl_stricmp (name, "editing-mode") == 0) + { + if (_rl_strnicmp (value, "vi", 2) == 0) + { +#if defined (VI_MODE) + _rl_keymap = vi_insertion_keymap; + rl_editing_mode = vi_mode; +#endif /* VI_MODE */ + } + else if (_rl_strnicmp (value, "emacs", 5) == 0) + { + _rl_keymap = emacs_standard_keymap; + rl_editing_mode = emacs_mode; + } + } + + /* Comment string change? */ + else if (_rl_stricmp (name, "comment-begin") == 0) + { + if (*value) + { + if (_rl_comment_begin) + free (_rl_comment_begin); + + _rl_comment_begin = savestring (value); + } + } + else if (_rl_stricmp (name, "completion-query-items") == 0) + { + int nval = 100; + if (*value) + { + nval = atoi (value); + if (nval < 0) + nval = 0; + } + rl_completion_query_items = nval; + } + else if (_rl_stricmp (name, "keymap") == 0) + { + Keymap kmap; + kmap = rl_get_keymap_by_name (value); + if (kmap) + rl_set_keymap (kmap); + } + else if (_rl_stricmp (name, "bell-style") == 0) + { + if (!*value) + _rl_bell_preference = AUDIBLE_BELL; + else + { + if (_rl_stricmp (value, "none") == 0 || _rl_stricmp (value, "off") == 0) + _rl_bell_preference = NO_BELL; + else if (_rl_stricmp (value, "audible") == 0 || _rl_stricmp (value, "on") == 0) + _rl_bell_preference = AUDIBLE_BELL; + else if (_rl_stricmp (value, "visible") == 0) + _rl_bell_preference = VISIBLE_BELL; + } + } + else if (_rl_stricmp (name, "prefer-visible-bell") == 0) + { + /* Backwards compatibility. */ + if (*value && (_rl_stricmp (value, "on") == 0 || + (*value == '1' && !value[1]))) + _rl_bell_preference = VISIBLE_BELL; + else + _rl_bell_preference = AUDIBLE_BELL; + } + + /* For the time being, unknown variable names are simply ignored. */ + return 0; +} + +/* Return the character which matches NAME. + For example, `Space' returns ' '. */ + +typedef struct { + char *name; + int value; +} assoc_list; + +static assoc_list name_key_alist[] = { + { "DEL", 0x7f }, + { "ESC", '\033' }, + { "Escape", '\033' }, + { "LFD", '\n' }, + { "Newline", '\n' }, + { "RET", '\r' }, + { "Return", '\r' }, + { "Rubout", 0x7f }, + { "SPC", ' ' }, + { "Space", ' ' }, + { "Tab", 0x09 }, + { (char *)0x0, 0 } +}; + +static int +glean_key_from_name (name) + char *name; +{ + register int i; + + for (i = 0; name_key_alist[i].name; i++) + if (_rl_stricmp (name, name_key_alist[i].name) == 0) + return (name_key_alist[i].value); + + return (*(unsigned char *)name); /* XXX was return (*name) */ +} + +/* Auxiliary functions to manage keymaps. */ +static struct { + char *name; + Keymap map; +} keymap_names[] = { + { "emacs", emacs_standard_keymap }, + { "emacs-standard", emacs_standard_keymap }, + { "emacs-meta", emacs_meta_keymap }, + { "emacs-ctlx", emacs_ctlx_keymap }, +#if defined (VI_MODE) + { "vi", vi_movement_keymap }, + { "vi-move", vi_movement_keymap }, + { "vi-command", vi_movement_keymap }, + { "vi-insert", vi_insertion_keymap }, +#endif /* VI_MODE */ + { (char *)0x0, (Keymap)0x0 } +}; + +Keymap +rl_get_keymap_by_name (name) + char *name; +{ + register int i; + + for (i = 0; keymap_names[i].name; i++) + if (strcmp (name, keymap_names[i].name) == 0) + return (keymap_names[i].map); + return ((Keymap) NULL); +} + +char * +rl_get_keymap_name (map) + Keymap map; +{ + register int i; + for (i = 0; keymap_names[i].name; i++) + if (map == keymap_names[i].map) + return (keymap_names[i].name); + return ((char *)NULL); +} + +void +rl_set_keymap (map) + Keymap map; +{ + if (map) + _rl_keymap = map; +} + +Keymap +rl_get_keymap () +{ + return (_rl_keymap); +} + +void +rl_set_keymap_from_edit_mode () +{ + if (rl_editing_mode == emacs_mode) + _rl_keymap = emacs_standard_keymap; +#if defined (VI_MODE) + else if (rl_editing_mode == vi_mode) + _rl_keymap = vi_insertion_keymap; +#endif /* VI_MODE */ +} + +char * +rl_get_keymap_name_from_edit_mode () +{ + if (rl_editing_mode == emacs_mode) + return "emacs"; +#if defined (VI_MODE) + else if (rl_editing_mode == vi_mode) + return "vi"; +#endif /* VI_MODE */ + else + return "none"; +} + +/* **************************************************************** */ +/* */ +/* Key Binding and Function Information */ +/* */ +/* **************************************************************** */ + +/* Each of the following functions produces information about the + state of keybindings and functions known to Readline. The info + is always printed to rl_outstream, and in such a way that it can + be read back in (i.e., passed to rl_parse_and_bind (). */ + +/* Print the names of functions known to Readline. */ +void +rl_list_funmap_names () +{ + register int i; + char **funmap_names; + + funmap_names = rl_funmap_names (); + + if (!funmap_names) + return; + + for (i = 0; funmap_names[i]; i++) + fprintf (rl_outstream, "%s\n", funmap_names[i]); + + free (funmap_names); +} + +static char * +_rl_get_keyname (key) + int key; +{ + char *keyname; + int i, c, v; + + keyname = (char *)xmalloc (8); + + c = key; + /* Since this is going to be used to write out keysequence-function + pairs for possible inclusion in an inputrc file, we don't want to + do any special meta processing on KEY. */ + +#if 0 + /* We might want to do this, but the old version of the code did not. */ + + /* If this is an escape character, we don't want to do any more processing. + Just add the special ESC key sequence and return. */ + if (c == ESC) + { + keyseq[0] = '\\'; + keyseq[1] = 'e'; + keyseq[2] = '\0'; + return keyseq; + } +#endif + + /* RUBOUT is translated directly into \C-? */ + if (key == RUBOUT) + { + keyname[0] = '\\'; + keyname[1] = 'C'; + keyname[2] = '-'; + keyname[3] = '?'; + keyname[4] = '\0'; + return keyname; + } + + i = 0; + /* Now add special prefixes needed for control characters. This can + potentially change C. */ + if (CTRL_CHAR (c)) + { + keyname[i++] = '\\'; + keyname[i++] = 'C'; + keyname[i++] = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + + /* XXX experimental code. Turn the characters that are not ASCII or + ISO Latin 1 (128 - 159) into octal escape sequences (\200 - \237). + This changes C. */ + if (c >= 128 && c <= 159) + { + keyname[i++] = '\\'; + keyname[i++] = '2'; + c -= 128; + keyname[i++] = (c / 8) + '0'; + c = (c % 8) + '0'; + } + + /* Now, if the character needs to be quoted with a backslash, do that. */ + if (c == '\\' || c == '"') + keyname[i++] = '\\'; + + /* Now add the key, terminate the string, and return it. */ + keyname[i++] = (char) c; + keyname[i] = '\0'; + + return keyname; +} + +/* Return a NULL terminated array of strings which represent the key + sequences that are used to invoke FUNCTION in MAP. */ +char ** +rl_invoking_keyseqs_in_map (function, map) + Function *function; + Keymap map; +{ + register int key; + char **result; + int result_index, result_size; + + result = (char **)NULL; + result_index = result_size = 0; + + for (key = 0; key < KEYMAP_SIZE; key++) + { + switch (map[key].type) + { + case ISMACR: + /* Macros match, if, and only if, the pointers are identical. + Thus, they are treated exactly like functions in here. */ + case ISFUNC: + /* If the function in the keymap is the one we are looking for, + then add the current KEY to the list of invoking keys. */ + if (map[key].function == function) + { + char *keyname; + + keyname = _rl_get_keyname (key); + + if (result_index + 2 > result_size) + { + result_size += 10; + result = (char **) xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index++] = keyname; + result[result_index] = (char *)NULL; + } + break; + + case ISKMAP: + { + char **seqs; + register int i; + + /* Find the list of keyseqs in this map which have FUNCTION as + their target. Add the key sequences found to RESULT. */ + if (map[key].function) + seqs = + rl_invoking_keyseqs_in_map (function, FUNCTION_TO_KEYMAP (map, key)); + else + break; + + if (seqs == 0) + break; + + for (i = 0; seqs[i]; i++) + { + char *keyname = (char *)xmalloc (6 + strlen (seqs[i])); + + if (key == ESC) + sprintf (keyname, "\\e"); + else if (CTRL_CHAR (key)) + sprintf (keyname, "\\C-%c", _rl_to_lower (UNCTRL (key))); + else if (key == RUBOUT) + sprintf (keyname, "\\C-?"); + else if (key == '\\' || key == '"') + { + keyname[0] = '\\'; + keyname[1] = (char) key; + keyname[2] = '\0'; + } + else + { + keyname[0] = (char) key; + keyname[1] = '\0'; + } + + strcat (keyname, seqs[i]); + free (seqs[i]); + + if (result_index + 2 > result_size) + { + result_size += 10; + result = (char **) xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index++] = keyname; + result[result_index] = (char *)NULL; + } + + free (seqs); + } + break; + } + } + return (result); +} + +/* Return a NULL terminated array of strings which represent the key + sequences that can be used to invoke FUNCTION using the current keymap. */ +char ** +rl_invoking_keyseqs (function) + Function *function; +{ + return (rl_invoking_keyseqs_in_map (function, _rl_keymap)); +} + +/* Print all of the functions and their bindings to rl_outstream. If + PRINT_READABLY is non-zero, then print the output in such a way + that it can be read back in. */ +void +rl_function_dumper (print_readably) + int print_readably; +{ + register int i; + char **names; + char *name; + + names = rl_funmap_names (); + + fprintf (rl_outstream, "\n"); + + for (i = 0; name = names[i]; i++) + { + Function *function; + char **invokers; + + function = rl_named_function (name); + invokers = rl_invoking_keyseqs_in_map (function, _rl_keymap); + + if (print_readably) + { + if (!invokers) + fprintf (rl_outstream, "# %s (not bound)\n", name); + else + { + register int j; + + for (j = 0; invokers[j]; j++) + { + fprintf (rl_outstream, "\"%s\": %s\n", + invokers[j], name); + free (invokers[j]); + } + + free (invokers); + } + } + else + { + if (!invokers) + fprintf (rl_outstream, "%s is not bound to any keys\n", + name); + else + { + register int j; + + fprintf (rl_outstream, "%s can be found on ", name); + + for (j = 0; invokers[j] && j < 5; j++) + { + fprintf (rl_outstream, "\"%s\"%s", invokers[j], + invokers[j + 1] ? ", " : ".\n"); + } + + if (j == 5 && invokers[j]) + fprintf (rl_outstream, "...\n"); + + for (j = 0; invokers[j]; j++) + free (invokers[j]); + + free (invokers); + } + } + } +} + +/* Print all of the current functions and their bindings to + rl_outstream. If an explicit argument is given, then print + the output in such a way that it can be read back in. */ +int +rl_dump_functions (count, key) + int count, key; +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_function_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +static void +_rl_macro_dumper_internal (print_readably, map, prefix) + int print_readably; + Keymap map; + char *prefix; +{ + register int key; + char *keyname, *out; + int prefix_len; + + for (key = 0; key < KEYMAP_SIZE; key++) + { + switch (map[key].type) + { + case ISMACR: + keyname = _rl_get_keyname (key); +#if 0 + out = (char *)map[key].function; +#else + out = _rl_untranslate_macro_value ((char *)map[key].function); +#endif + if (print_readably) + fprintf (rl_outstream, "\"%s%s\": \"%s\"\n", prefix ? prefix : "", + keyname, + out ? out : ""); + else + fprintf (rl_outstream, "%s%s outputs %s\n", prefix ? prefix : "", + keyname, + out ? out : ""); + free (keyname); +#if 1 + free (out); +#endif + break; + case ISFUNC: + break; + case ISKMAP: + prefix_len = prefix ? strlen (prefix) : 0; + if (key == ESC) + { + keyname = xmalloc (3 + prefix_len); + if (prefix) + strcpy (keyname, prefix); + keyname[prefix_len] = '\\'; + keyname[prefix_len + 1] = 'e'; + keyname[prefix_len + 2] = '\0'; + } + else + { + keyname = _rl_get_keyname (key); + if (prefix) + { + out = xmalloc (strlen (keyname) + prefix_len + 1); + strcpy (out, prefix); + strcpy (out + prefix_len, keyname); + free (keyname); + keyname = out; + } + } + + _rl_macro_dumper_internal (print_readably, FUNCTION_TO_KEYMAP (map, key), keyname); + free (keyname); + break; + } + } +} + +void +rl_macro_dumper (print_readably) + int print_readably; +{ + _rl_macro_dumper_internal (print_readably, _rl_keymap, (char *)NULL); +} + +int +rl_dump_macros (count, key) + int count, key; +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_macro_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +void +rl_variable_dumper (print_readably) + int print_readably; +{ + int i; + char *kname; + + for (i = 0; boolean_varlist[i].name; i++) + { + if (print_readably) + fprintf (rl_outstream, "set %s %s\n", boolean_varlist[i].name, + *boolean_varlist[i].value ? "on" : "off"); + else + fprintf (rl_outstream, "%s is set to `%s'\n", boolean_varlist[i].name, + *boolean_varlist[i].value ? "on" : "off"); + } + + /* bell-style */ + switch (_rl_bell_preference) + { + case NO_BELL: + kname = "none"; break; + case VISIBLE_BELL: + kname = "visible"; break; + case AUDIBLE_BELL: + default: + kname = "audible"; break; + } + if (print_readably) + fprintf (rl_outstream, "set bell-style %s\n", kname); + else + fprintf (rl_outstream, "bell-style is set to `%s'\n", kname); + + /* comment-begin */ + if (print_readably) + fprintf (rl_outstream, "set comment-begin %s\n", _rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT); + else + fprintf (rl_outstream, "comment-begin is set to `%s'\n", _rl_comment_begin ? _rl_comment_begin : ""); + + /* completion-query-items */ + if (print_readably) + fprintf (rl_outstream, "set completion-query-items %d\n", rl_completion_query_items); + else + fprintf (rl_outstream, "completion-query-items is set to `%d'\n", rl_completion_query_items); + + /* editing-mode */ + if (print_readably) + fprintf (rl_outstream, "set editing-mode %s\n", (rl_editing_mode == emacs_mode) ? "emacs" : "vi"); + else + fprintf (rl_outstream, "editing-mode is set to `%s'\n", (rl_editing_mode == emacs_mode) ? "emacs" : "vi"); + + /* keymap */ + kname = rl_get_keymap_name (_rl_keymap); + if (kname == 0) + kname = rl_get_keymap_name_from_edit_mode (); + if (print_readably) + fprintf (rl_outstream, "set keymap %s\n", kname ? kname : "none"); + else + fprintf (rl_outstream, "keymap is set to `%s'\n", kname ? kname : "none"); +} + +/* Print all of the current variables and their values to + rl_outstream. If an explicit argument is given, then print + the output in such a way that it can be read back in. */ +int +rl_dump_variables (count, key) + int count, key; +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_variable_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. */ +void +_rl_bind_if_unbound (keyseq, default_func) + char *keyseq; + Function *default_func; +{ + Function *func; + + if (keyseq) + { + func = rl_function_of_keyseq (keyseq, _rl_keymap, (int *)NULL); + if (!func || func == rl_do_lowercase_version) + rl_set_key (keyseq, default_func, _rl_keymap); + } +} + +/* Return non-zero if any members of ARRAY are a substring in STRING. */ +static int +substring_member_of_array (string, array) + char *string, **array; +{ + while (*array) + { + if (_rl_strindex (string, *array)) + return (1); + array++; + } + return (0); +} diff --git a/readline/callback.c b/readline/callback.c new file mode 100644 index 00000000000..34dbc724611 --- /dev/null +++ b/readline/callback.c @@ -0,0 +1,149 @@ +/* callback.c -- functions to use readline as an X `callback' mechanism. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include "rlconf.h" + +#if defined (READLINE_CALLBACKS) + +#include <sys/types.h> +#include <stdio.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "readline.h" + +extern void readline_internal_startup (); +extern char *readline_internal_teardown (); +extern int readline_internal_char (); +extern void _rl_init_line_state (); + +extern int _rl_meta_flag; +extern char *rl_prompt; +extern int rl_visible_prompt_length; + +/* **************************************************************** */ +/* */ +/* Callback Readline Functions */ +/* */ +/* **************************************************************** */ + +/* Allow using readline in situations where a program may have multiple + things to handle at once, and dispatches them via select(). Call + rl_callback_handler_install() with the prompt and a function to call + whenever a complete line of input is ready. The user must then + call rl_callback_read_char() every time some input is available, and + rl_callback_read_char() will call the user's function with the complete + text read in at each end of line. The terminal is kept prepped and + signals handled all the time, except during calls to the user's function. */ + +VFunction *rl_linefunc; /* user callback function */ +static int in_handler; /* terminal_prepped and signals set? */ + +/* Make sure the terminal is set up, initialize readline, and prompt. */ +static void +_rl_callback_newline () +{ + rl_initialize (); + + if (in_handler == 0) + { + in_handler = 1; + + (*rl_prep_term_function) (_rl_meta_flag); + +#if defined (HANDLE_SIGNALS) + rl_set_signals (); +#endif + } + + readline_internal_setup (); +} + +/* Install a readline handler, set up the terminal, and issue the prompt. */ +void +rl_callback_handler_install (prompt, linefunc) + char *prompt; + VFunction *linefunc; +{ + rl_prompt = prompt; + rl_visible_prompt_length = rl_prompt ? rl_expand_prompt (rl_prompt) : 0; + rl_linefunc = linefunc; + _rl_callback_newline (); +} + +/* Read one character, and dispatch to the handler if it ends the line. */ +void +rl_callback_read_char () +{ + char *line; + int eof; + + if (rl_linefunc == NULL) + { + fprintf (stderr, "readline: readline_callback_read_char() called with no handler!\r\n"); + abort (); + } + + eof = readline_internal_char (); + + if (rl_done) + { + line = readline_internal_teardown (eof); + + (*rl_deprep_term_function) (); +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + in_handler = 0; + (*rl_linefunc) (line); + + /* If the user did not clear out the line, do it for him. */ + if (rl_line_buffer[0]) + _rl_init_line_state (); + + /* Redisplay the prompt if readline_handler_{install,remove} not called. */ + if (in_handler == 0 && rl_linefunc) + _rl_callback_newline (); + } +} + +/* Remove the handler, and make sure the terminal is in its normal state. */ +void +rl_callback_handler_remove () +{ + rl_linefunc = NULL; + if (in_handler) + { + in_handler = 0; + (*rl_deprep_term_function) (); +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + } +} + +#endif diff --git a/readline/chardefs.h b/readline/chardefs.h new file mode 100644 index 00000000000..3e9e2737706 --- /dev/null +++ b/readline/chardefs.h @@ -0,0 +1,140 @@ +/* chardefs.h -- Character definitions for readline. */ + +/* Copyright (C) 1994 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef _CHARDEFS_H_ +#define _CHARDEFS_H_ + +#include <ctype.h> + +#if defined (HAVE_CONFIG_H) +# if defined (HAVE_STRING_H) +# include <string.h> +# else +# include <strings.h> +# endif /* HAVE_STRING_H */ +#else +# include <string.h> +#endif /* !HAVE_CONFIG_H */ + +#ifndef whitespace +#define whitespace(c) (((c) == ' ') || ((c) == '\t')) +#endif + +#ifdef CTRL +#undef CTRL +#endif + +/* Some character stuff. */ +#define control_character_threshold 0x020 /* Smaller than this is control. */ +#define control_character_mask 0x1f /* 0x20 - 1 */ +#define meta_character_threshold 0x07f /* Larger than this is Meta. */ +#define control_character_bit 0x40 /* 0x000000, must be off. */ +#define meta_character_bit 0x080 /* x0000000, must be on. */ +#define largest_char 255 /* Largest character value. */ + +#define CTRL_CHAR(c) ((c) < control_character_threshold && (c) >= 0) +#define META_CHAR(c) ((c) > meta_character_threshold && (c) <= largest_char) + +#define CTRL(c) ((c) & control_character_mask) +#define META(c) ((c) | meta_character_bit) + +#define UNMETA(c) ((c) & (~meta_character_bit)) +#define UNCTRL(c) _rl_to_upper(((c)|control_character_bit)) + +/* Old versions +#define _rl_lowercase_p(c) (((c) > ('a' - 1) && (c) < ('z' + 1))) +#define _rl_uppercase_p(c) (((c) > ('A' - 1) && (c) < ('Z' + 1))) +#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') +*/ + +#define _rl_lowercase_p(c) (islower(c)) +#define _rl_uppercase_p(c) (isupper(c)) +#define _rl_digit_p(x) (isdigit (x)) + +#define _rl_pure_alphabetic(c) (_rl_lowercase_p(c) || _rl_uppercase_p(c)) +#define ALPHABETIC(c) (_rl_lowercase_p(c) || _rl_uppercase_p(c) || _rl_digit_p(c)) + +/* Old versions +# define _rl_to_upper(c) (_rl_lowercase_p(c) ? ((c) - 32) : (c)) +# define _rl_to_lower(c) (_rl_uppercase_p(c) ? ((c) + 32) : (c)) +*/ + +#ifndef _rl_to_upper +# define _rl_to_upper(c) (islower(c) ? toupper(c) : (c)) +# define _rl_to_lower(c) (isupper(c) ? tolower(c) : (c)) +#endif + +#ifndef _rl_digit_value +#define _rl_digit_value(x) ((x) - '0') +#endif + +#ifndef NEWLINE +#define NEWLINE '\n' +#endif + +#ifndef RETURN +#define RETURN CTRL('M') +#endif + +#ifndef RUBOUT +#define RUBOUT 0x7f +#endif + +#ifndef TAB +#define TAB '\t' +#endif + +#ifdef ABORT_CHAR +#undef ABORT_CHAR +#endif +#define ABORT_CHAR CTRL('G') + +#ifdef PAGE +#undef PAGE +#endif +#define PAGE CTRL('L') + +#ifdef SPACE +#undef SPACE +#endif +#define SPACE ' ' /* XXX - was 0x20 */ + +#ifdef ESC +#undef ESC +#endif +#define ESC CTRL('[') + +#ifndef ISOCTAL +#define ISOCTAL(c) ((c) >= '0' && (c) <= '7') +#endif +#define OCTVALUE(c) ((c) - '0') + +#ifndef isxdigit +# define isxdigit(c) (isdigit((c)) || ((c) >= 'a' && (c) <= 'f') || ((c) >= 'A' && (c) <= 'F')) +#endif + +#define HEXVALUE(c) \ + (((c) >= 'a' && (c) <= 'f') \ + ? (c)-'a'+10 \ + : (c) >= 'A' && (c) <= 'F' ? (c)-'A'+10 : (c)-'0') + +#endif /* _CHARDEFS_H_ */ diff --git a/readline/complete.c b/readline/complete.c new file mode 100644 index 00000000000..985e8981eee --- /dev/null +++ b/readline/complete.c @@ -0,0 +1,1702 @@ +/* complete.c -- filename completion for readline. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include <fcntl.h> +#if defined (HAVE_SYS_FILE_H) +#include <sys/file.h> +#endif + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> + +#include <errno.h> +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#include <pwd.h> +#if !defined (HAVE_GETPW_DECLS) +extern struct passwd *getpwent (); +#endif /* USG && !HAVE_GETPW_DECLS */ + +/* ISC systems don't define getpwent() if _POSIX_SOURCE is defined. */ +#if defined (isc386) && defined (_POSIX_SOURCE) +# if defined (__STDC__) +extern struct passwd *getpwent (void); +# else +extern struct passwd *getpwent (); +# endif /* !__STDC__ */ +#endif /* isc386 && _POSIX_SOURCE */ + +#include "posixdir.h" +#include "posixstat.h" + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" + +extern char *tilde_expand (); +extern char *rl_copy_text (); +extern void _rl_abort_internal (); +extern int _rl_qsort_string_compare (); +extern void _rl_replace_text (); + +extern Function *rl_last_func; +extern int rl_editing_mode; +extern int screenwidth; + +extern void _rl_move_vert (); +extern int _rl_vis_botlin; +extern int rl_display_fixed; + +/* Forward declarations for functions defined and used in this file. */ +char *filename_completion_function (); +char **completion_matches (); + +#if defined (VISIBLE_STATS) +# if !defined (X_OK) +# define X_OK 1 +# endif +static int stat_char (); +#endif + +static char *rl_quote_filename (); +static char *rl_strpbrk (); + +static char **remove_duplicate_matches (); +static void insert_match (); +static int append_to_match (); +static void insert_all_matches (); +static void display_matches (); +static int compute_lcd_of_matches (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Completion matching, from readline's point of view. */ +/* */ +/* **************************************************************** */ + +/* Variables known only to the readline library. */ + +/* If non-zero, non-unique completions always show the list of matches. */ +int _rl_complete_show_all = 0; + +/* If non-zero, completed directory names have a slash appended. */ +int _rl_complete_mark_directories = 1; + +/* If non-zero, completions are printed horizontally in alphabetical order, + like `ls -x'. */ +int _rl_print_completions_horizontally; + +/* Non-zero means that case is not significant in filename completion. */ +int _rl_completion_case_fold; + +/* Global variables available to applications using readline. */ + +#if defined (VISIBLE_STATS) +/* Non-zero means add an additional character to each filename displayed + during listing completion iff rl_filename_completion_desired which helps + to indicate the type of file being listed. */ +int rl_visible_stats = 0; +#endif /* VISIBLE_STATS */ + +/* If non-zero, then this is the address of a function to call when + completing on a directory name. The function is called with + the address of a string (the current directory name) as an arg. */ +Function *rl_directory_completion_hook = (Function *)NULL; + +/* Non-zero means readline completion functions perform tilde expansion. */ +int rl_complete_with_tilde_expansion = 0; + +/* Pointer to the generator function for completion_matches (). + NULL means to use filename_completion_function (), the default filename + completer. */ +Function *rl_completion_entry_function = (Function *)NULL; + +/* Pointer to alternative function to create matches. + Function is called with TEXT, START, and END. + START and END are indices in RL_LINE_BUFFER saying what the boundaries + of TEXT are. + If this function exists and returns NULL then call the value of + rl_completion_entry_function to try to match, otherwise use the + array of strings returned. */ +CPPFunction *rl_attempted_completion_function = (CPPFunction *)NULL; + +/* Non-zero means to suppress normal filename completion after the + user-specified completion function has been called. */ +int rl_attempted_completion_over = 0; + +/* Set to a character indicating the type of completion being performed + by rl_complete_internal, available for use by application completion + functions. */ +int rl_completion_type = 0; + +/* Up to this many items will be displayed in response to a + possible-completions call. After that, we ask the user if + she is sure she wants to see them all. */ +int rl_completion_query_items = 100; + +/* The basic list of characters that signal a break between words for the + completer routine. The contents of this variable is what breaks words + in the shell, i.e. " \t\n\"\\'`@$><=" */ +char *rl_basic_word_break_characters = " \t\n\"\\'`@$><=;|&{("; + +/* List of basic quoting characters. */ +char *rl_basic_quote_characters = "\"'"; + +/* The list of characters that signal a break between words for + rl_complete_internal. The default list is the contents of + rl_basic_word_break_characters. */ +char *rl_completer_word_break_characters = (char *)NULL; + +/* List of characters which can be used to quote a substring of the line. + Completion occurs on the entire substring, and within the substring + rl_completer_word_break_characters are treated as any other character, + unless they also appear within this list. */ +char *rl_completer_quote_characters = (char *)NULL; + +/* List of characters that should be quoted in filenames by the completer. */ +char *rl_filename_quote_characters = (char *)NULL; + +/* List of characters that are word break characters, but should be left + in TEXT when it is passed to the completion function. The shell uses + this to help determine what kind of completing to do. */ +char *rl_special_prefixes = (char *)NULL; + +/* If non-zero, then disallow duplicates in the matches. */ +int rl_ignore_completion_duplicates = 1; + +/* Non-zero means that the results of the matches are to be treated + as filenames. This is ALWAYS zero on entry, and can only be changed + within a completion entry finder function. */ +int rl_filename_completion_desired = 0; + +/* Non-zero means that the results of the matches are to be quoted using + double quotes (or an application-specific quoting mechanism) if the + filename contains any characters in rl_filename_quote_chars. This is + ALWAYS non-zero on entry, and can only be changed within a completion + entry finder function. */ +int rl_filename_quoting_desired = 1; + +/* This function, if defined, is called by the completer when real + filename completion is done, after all the matching names have been + generated. It is passed a (char**) known as matches in the code below. + It consists of a NULL-terminated array of pointers to potential + matching strings. The 1st element (matches[0]) is the maximal + substring that is common to all matches. This function can re-arrange + the list of matches as required, but all elements of the array must be + free()'d if they are deleted. The main intent of this function is + to implement FIGNORE a la SunOS csh. */ +Function *rl_ignore_some_completions_function = (Function *)NULL; + +/* Set to a function to quote a filename in an application-specific fashion. + Called with the text to quote, the type of match found (single or multiple) + and a pointer to the quoting character to be used, which the function can + reset if desired. */ +CPFunction *rl_filename_quoting_function = rl_quote_filename; + +/* Function to call to remove quoting characters from a filename. Called + before completion is attempted, so the embedded quotes do not interfere + with matching names in the file system. Readline doesn't do anything + with this; it's set only by applications. */ +CPFunction *rl_filename_dequoting_function = (CPFunction *)NULL; + +/* Function to call to decide whether or not a word break character is + quoted. If a character is quoted, it does not break words for the + completer. */ +Function *rl_char_is_quoted_p = (Function *)NULL; + +/* Character appended to completed words when at the end of the line. The + default is a space. */ +int rl_completion_append_character = ' '; + +/* If non-zero, inhibit completion (temporarily). */ +int rl_inhibit_completion; + +/* Variables local to this file. */ + +/* Local variable states what happened during the last completion attempt. */ +static int completion_changed_buffer; + +/*************************************/ +/* */ +/* Bindable completion functions */ +/* */ +/*************************************/ + +/* Complete the word at or before point. You have supplied the function + that does the initial simple matching selection algorithm (see + completion_matches ()). The default is to do filename completion. */ +int +rl_complete (ignore, invoking_key) + int ignore, invoking_key; +{ + if (rl_inhibit_completion) + return (rl_insert (ignore, invoking_key)); + else if (rl_last_func == rl_complete && !completion_changed_buffer) + return (rl_complete_internal ('?')); + else if (_rl_complete_show_all) + return (rl_complete_internal ('!')); + else + return (rl_complete_internal (TAB)); +} + +/* List the possible completions. See description of rl_complete (). */ +int +rl_possible_completions (ignore, invoking_key) + int ignore, invoking_key; +{ + return (rl_complete_internal ('?')); +} + +int +rl_insert_completions (ignore, invoking_key) + int ignore, invoking_key; +{ + return (rl_complete_internal ('*')); +} + +/************************************/ +/* */ +/* Completion utility functions */ +/* */ +/************************************/ + +/* Find the first occurrence in STRING1 of any character from STRING2. + Return a pointer to the character in STRING1. */ +static char * +rl_strpbrk (string1, string2) + char *string1, *string2; +{ + register char *scan; + + for (; *string1; string1++) + { + for (scan = string2; *scan; scan++) + { + if (*string1 == *scan) + { + return (string1); + } + } + } + return ((char *)NULL); +} + +/* The user must press "y" or "n". Non-zero return means "y" pressed. */ +static int +get_y_or_n () +{ + int c; + + for (;;) + { + c = rl_read_key (); + if (c == 'y' || c == 'Y' || c == ' ') + return (1); + if (c == 'n' || c == 'N' || c == RUBOUT) + return (0); + if (c == ABORT_CHAR) + _rl_abort_internal (); + ding (); + } +} + +#if defined (VISIBLE_STATS) +/* Return the character which best describes FILENAME. + `@' for symbolic links + `/' for directories + `*' for executables + `=' for sockets + `|' for FIFOs + `%' for character special devices + `#' for block special devices */ +static int +stat_char (filename) + char *filename; +{ + struct stat finfo; + int character, r; + +#if defined (HAVE_LSTAT) && defined (S_ISLNK) + r = lstat (filename, &finfo); +#else + r = stat (filename, &finfo); +#endif + + if (r == -1) + return (0); + + character = 0; + if (S_ISDIR (finfo.st_mode)) + character = '/'; +#if defined (S_ISCHR) + else if (S_ISCHR (finfo.st_mode)) + character = '%'; +#endif /* S_ISCHR */ +#if defined (S_ISBLK) + else if (S_ISBLK (finfo.st_mode)) + character = '#'; +#endif /* S_ISBLK */ +#if defined (S_ISLNK) + else if (S_ISLNK (finfo.st_mode)) + character = '@'; +#endif /* S_ISLNK */ +#if defined (S_ISSOCK) + else if (S_ISSOCK (finfo.st_mode)) + character = '='; +#endif /* S_ISSOCK */ +#if defined (S_ISFIFO) + else if (S_ISFIFO (finfo.st_mode)) + character = '|'; +#endif + else if (S_ISREG (finfo.st_mode)) + { + if (access (filename, X_OK) == 0) + character = '*'; + } + return (character); +} +#endif /* VISIBLE_STATS */ + +/* Return the portion of PATHNAME that should be output when listing + possible completions. If we are hacking filename completion, we + are only interested in the basename, the portion following the + final slash. Otherwise, we return what we were passed. */ +static char * +printable_part (pathname) + char *pathname; +{ + char *temp; + + temp = rl_filename_completion_desired ? strrchr (pathname, '/') : (char *)NULL; + return (temp ? ++temp : pathname); +} + +/* Output TO_PRINT to rl_outstream. If VISIBLE_STATS is defined and we + are using it, check for and output a single character for `special' + filenames. Return the number of characters we output. */ + +#define PUTX(c) \ + do { \ + if (CTRL_CHAR (c)) \ + { \ + putc ('^', rl_outstream); \ + putc (UNCTRL (c), rl_outstream); \ + printed_len += 2; \ + } \ + else if (c == RUBOUT) \ + { \ + putc ('^', rl_outstream); \ + putc ('?', rl_outstream); \ + printed_len += 2; \ + } \ + else \ + { \ + putc (c, rl_outstream); \ + printed_len++; \ + } \ + } while (0) + +static int +print_filename (to_print, full_pathname) + char *to_print, *full_pathname; +{ + int printed_len = 0; +#if !defined (VISIBLE_STATS) + char *s; + + for (s = to_print; *s; s++) + { + PUTX (*s); + } +#else + char *s, c, *new_full_pathname; + int extension_char, slen, tlen; + + for (s = to_print; *s; s++) + { + PUTX (*s); + } + + if (rl_filename_completion_desired && rl_visible_stats) + { + /* If to_print != full_pathname, to_print is the basename of the + path passed. In this case, we try to expand the directory + name before checking for the stat character. */ + if (to_print != full_pathname) + { + /* Terminate the directory name. */ + c = to_print[-1]; + to_print[-1] = '\0'; + + s = tilde_expand (full_pathname); + if (rl_directory_completion_hook) + (*rl_directory_completion_hook) (&s); + + slen = strlen (s); + tlen = strlen (to_print); + new_full_pathname = xmalloc (slen + tlen + 2); + strcpy (new_full_pathname, s); + new_full_pathname[slen] = '/'; + strcpy (new_full_pathname + slen + 1, to_print); + + extension_char = stat_char (new_full_pathname); + + free (new_full_pathname); + to_print[-1] = c; + } + else + { + s = tilde_expand (full_pathname); + extension_char = stat_char (s); + } + + free (s); + if (extension_char) + { + putc (extension_char, rl_outstream); + printed_len++; + } + } +#endif /* VISIBLE_STATS */ + return printed_len; +} + +static char * +rl_quote_filename (s, rtype, qcp) + char *s; + int rtype; + char *qcp; +{ + char *r; + + r = xmalloc (strlen (s) + 2); + *r = *rl_completer_quote_characters; + strcpy (r + 1, s); + if (qcp) + *qcp = *rl_completer_quote_characters; + return r; +} + +/* Find the bounds of the current word for completion purposes, and leave + rl_point set to the end of the word. This function skips quoted + substrings (characters between matched pairs of characters in + rl_completer_quote_characters. First we try to find an unclosed + quoted substring on which to do matching. If one is not found, we use + the word break characters to find the boundaries of the current word. + We call an application-specific function to decide whether or not a + particular word break character is quoted; if that function returns a + non-zero result, the character does not break a word. This function + returns the opening quote character if we found an unclosed quoted + substring, '\0' otherwise. FP, if non-null, is set to a value saying + which (shell-like) quote characters we found (single quote, double + quote, or backslash) anywhere in the string. DP, if non-null, is set to + the value of the delimiter character that caused a word break. */ + +static char +find_completion_word (fp, dp) + int *fp, *dp; +{ + int scan, end, found_quote, delimiter, pass_next, isbrk; + char quote_char; + + end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_completer_quote_characters) + { + /* We have a list of characters which can be used in pairs to + quote substrings for the completer. Try to find the start + of an unclosed quoted substring. */ + /* FOUND_QUOTE is set so we know what kind of quotes we found. */ + for (scan = pass_next = 0; scan < end; scan++) + { + if (pass_next) + { + pass_next = 0; + continue; + } + + if (rl_line_buffer[scan] == '\\') + { + pass_next = 1; + found_quote |= RL_QF_BACKSLASH; + continue; + } + + if (quote_char != '\0') + { + /* Ignore everything until the matching close quote char. */ + if (rl_line_buffer[scan] == quote_char) + { + /* Found matching close. Abandon this substring. */ + quote_char = '\0'; + rl_point = end; + } + } + else if (strchr (rl_completer_quote_characters, rl_line_buffer[scan])) + { + /* Found start of a quoted substring. */ + quote_char = rl_line_buffer[scan]; + rl_point = scan + 1; + /* Shell-like quoting conventions. */ + if (quote_char == '\'') + found_quote |= RL_QF_SINGLE_QUOTE; + else if (quote_char == '"') + found_quote |= RL_QF_DOUBLE_QUOTE; + } + } + } + + if (rl_point == end && quote_char == '\0') + { + /* We didn't find an unclosed quoted substring upon which to do + completion, so use the word break characters to find the + substring on which to complete. */ + while (--rl_point) + { + scan = rl_line_buffer[rl_point]; + + if (strchr (rl_completer_word_break_characters, scan) == 0) + continue; + + /* Call the application-specific function to tell us whether + this word break character is quoted and should be skipped. */ + if (rl_char_is_quoted_p && found_quote && + (*rl_char_is_quoted_p) (rl_line_buffer, rl_point)) + continue; + + /* Convoluted code, but it avoids an n^2 algorithm with calls + to char_is_quoted. */ + break; + } + } + + /* If we are at an unquoted word break, then advance past it. */ + scan = rl_line_buffer[rl_point]; + + /* If there is an application-specific function to say whether or not + a character is quoted and we found a quote character, let that + function decide whether or not a character is a word break, even + if it is found in rl_completer_word_break_characters. */ + if (rl_char_is_quoted_p) + isbrk = (found_quote == 0 || + (*rl_char_is_quoted_p) (rl_line_buffer, rl_point) == 0) && + strchr (rl_completer_word_break_characters, scan) != 0; + else + isbrk = strchr (rl_completer_word_break_characters, scan) != 0; + + if (isbrk) + { + /* If the character that caused the word break was a quoting + character, then remember it as the delimiter. */ + if (rl_basic_quote_characters && strchr (rl_basic_quote_characters, scan) && (end - rl_point) > 1) + delimiter = scan; + + /* If the character isn't needed to determine something special + about what kind of completion to perform, then advance past it. */ + if (rl_special_prefixes == 0 || strchr (rl_special_prefixes, scan) == 0) + rl_point++; + } + + if (fp) + *fp = found_quote; + if (dp) + *dp = delimiter; + + return (quote_char); +} + +static char ** +gen_completion_matches (text, start, end, our_func, found_quote, quote_char) + char *text; + int start, end; + Function *our_func; + int found_quote, quote_char; +{ + char **matches, *temp; + + /* If the user wants to TRY to complete, but then wants to give + up and use the default completion function, they set the + variable rl_attempted_completion_function. */ + if (rl_attempted_completion_function) + { + matches = (*rl_attempted_completion_function) (text, start, end); + + if (matches || rl_attempted_completion_over) + { + rl_attempted_completion_over = 0; + return (matches); + } + } + + /* Beware -- we're stripping the quotes here. Do this only if we know + we are doing filename completion and the application has defined a + filename dequoting function. */ + temp = (char *)NULL; + if (found_quote && our_func == (Function *)filename_completion_function && + rl_filename_dequoting_function) + { + /* delete single and double quotes */ + temp = (*rl_filename_dequoting_function) (text, quote_char); + text = temp; /* not freeing text is not a memory leak */ + } + + matches = completion_matches (text, our_func); + FREE (temp); + return matches; +} + +/* Filter out duplicates in MATCHES. This frees up the strings in + MATCHES. */ +static char ** +remove_duplicate_matches (matches) + char **matches; +{ + char *lowest_common; + int i, j, newlen; + char dead_slot; + char **temp_array; + + /* Sort the items. */ + for (i = 0; matches[i]; i++) + ; + + /* Sort the array without matches[0], since we need it to + stay in place no matter what. */ + if (i) + qsort (matches+1, i-1, sizeof (char *), _rl_qsort_string_compare); + + /* Remember the lowest common denominator for it may be unique. */ + lowest_common = savestring (matches[0]); + + for (i = newlen = 0; matches[i + 1]; i++) + { + if (strcmp (matches[i], matches[i + 1]) == 0) + { + free (matches[i]); + matches[i] = (char *)&dead_slot; + } + else + newlen++; + } + + /* We have marked all the dead slots with (char *)&dead_slot. + Copy all the non-dead entries into a new array. */ + temp_array = (char **)xmalloc ((3 + newlen) * sizeof (char *)); + for (i = j = 1; matches[i]; i++) + { + if (matches[i] != (char *)&dead_slot) + temp_array[j++] = matches[i]; + } + temp_array[j] = (char *)NULL; + + if (matches[0] != (char *)&dead_slot) + free (matches[0]); + + /* Place the lowest common denominator back in [0]. */ + temp_array[0] = lowest_common; + + /* If there is one string left, and it is identical to the + lowest common denominator, then the LCD is the string to + insert. */ + if (j == 2 && strcmp (temp_array[0], temp_array[1]) == 0) + { + free (temp_array[1]); + temp_array[1] = (char *)NULL; + } + return (temp_array); +} + +/* Find the common prefix of the list of matches, and put it into + matches[0]. */ +static int +compute_lcd_of_matches (match_list, matches, text) + char **match_list; + int matches; + char *text; +{ + register int i, c1, c2, si; + int low; /* Count of max-matched characters. */ + + /* If only one match, just use that. Otherwise, compare each + member of the list with the next, finding out where they + stop matching. */ + if (matches == 1) + { + match_list[0] = match_list[1]; + match_list[1] = (char *)NULL; + return 1; + } + + for (i = 1, low = 100000; i < matches; i++) + { + if (_rl_completion_case_fold) + { + for (si = 0; + (c1 = _rl_to_lower(match_list[i][si])) && + (c2 = _rl_to_lower(match_list[i + 1][si])); + si++) + if (c1 != c2) + break; + } + else + { + for (si = 0; + (c1 = match_list[i][si]) && + (c2 = match_list[i + 1][si]); + si++) + if (c1 != c2) + break; + } + + if (low > si) + low = si; + } + + /* If there were multiple matches, but none matched up to even the + first character, and the user typed something, use that as the + value of matches[0]. */ + if (low == 0 && text && *text) + { + match_list[0] = xmalloc (strlen (text) + 1); + strcpy (match_list[0], text); + } + else + { + match_list[0] = xmalloc (low + 1); + strncpy (match_list[0], match_list[1], low); + match_list[0][low] = '\0'; + } + + return matches; +} + +static int +postprocess_matches (text, matchesp, matching_filenames) + char *text; + char ***matchesp; + int matching_filenames; +{ + char *t, **matches, **temp_matches; + int nmatch, i; + + matches = *matchesp; + + /* It seems to me that in all the cases we handle we would like + to ignore duplicate possiblilities. Scan for the text to + insert being identical to the other completions. */ + if (rl_ignore_completion_duplicates) + { + temp_matches = remove_duplicate_matches (matches); + free (matches); + matches = temp_matches; + } + + /* If we are matching filenames, then here is our chance to + do clever processing by re-examining the list. Call the + ignore function with the array as a parameter. It can + munge the array, deleting matches as it desires. */ + if (rl_ignore_some_completions_function && matching_filenames) + { + for (nmatch = 1; matches[nmatch]; nmatch++) + ; + (void)(*rl_ignore_some_completions_function) (matches); + if (matches == 0 || matches[0] == 0) + { + FREE (matches); + ding (); + *matchesp = (char **)0; + return 0; + } + else + { + /* If we removed some matches, recompute the common prefix. */ + for (i = 1; matches[i]; i++) + ; + if (i > 1 && i < nmatch) + { + t = matches[0]; + compute_lcd_of_matches (matches, i - 1, text); + FREE (t); + } + } + } + + *matchesp = matches; + return (1); +} + +static void +display_matches (matches) + char **matches; +{ + int len, count, limit, max, printed_len; + int i, j, k, l; + char *temp; + + /* Move to the last visible line of a possibly-multiple-line command. */ + _rl_move_vert (_rl_vis_botlin); + + /* Handle simple case first. What if there is only one answer? */ + if (matches[1] == 0) + { + temp = printable_part (matches[0]); + crlf (); + print_filename (temp, matches[0]); + crlf (); +#if 0 + rl_on_new_line (); +#else + rl_forced_update_display (); + rl_display_fixed = 1; +#endif + return; + } + + /* There is more than one answer. Find out how many there are, + and find the maximum printed length of a single entry. */ + for (max = 0, i = 1; matches[i]; i++) + { + temp = printable_part (matches[i]); + len = strlen (temp); + + if (len > max) + max = len; + } + + len = i - 1; + + /* If there are many items, then ask the user if she really wants to + see them all. */ + if (len >= rl_completion_query_items) + { + crlf (); + fprintf (rl_outstream, "Display all %d possibilities? (y or n)", len); + fflush (rl_outstream); + if (get_y_or_n () == 0) + { + crlf (); +#if 0 + rl_on_new_line (); +#else + rl_forced_update_display (); + rl_display_fixed = 1; +#endif + return; + } + } + + /* How many items of MAX length can we fit in the screen window? */ + max += 2; + limit = screenwidth / max; + if (limit != 1 && (limit * max == screenwidth)) + limit--; + + /* Avoid a possible floating exception. If max > screenwidth, + limit will be 0 and a divide-by-zero fault will result. */ + if (limit == 0) + limit = 1; + + /* How many iterations of the printing loop? */ + count = (len + (limit - 1)) / limit; + + /* Watch out for special case. If LEN is less than LIMIT, then + just do the inner printing loop. + 0 < len <= limit implies count = 1. */ + + /* Sort the items if they are not already sorted. */ + if (rl_ignore_completion_duplicates == 0) + qsort (matches + 1, len, sizeof (char *), _rl_qsort_string_compare); + + crlf (); + + if (_rl_print_completions_horizontally == 0) + { + /* Print the sorted items, up-and-down alphabetically, like ls. */ + for (i = 1; i <= count; i++) + { + for (j = 0, l = i; j < limit; j++) + { + if (l > len || matches[l] == 0) + break; + else + { + temp = printable_part (matches[l]); + printed_len = print_filename (temp, matches[l]); + + if (j + 1 < limit) + for (k = 0; k < max - printed_len; k++) + putc (' ', rl_outstream); + } + l += count; + } + crlf (); + } + } + else + { + /* Print the sorted items, across alphabetically, like ls -x. */ + for (i = 1; matches[i]; i++) + { + temp = printable_part (matches[i]); + printed_len = print_filename (temp, matches[i]); + /* Have we reached the end of this line? */ + if (matches[i+1]) + { + if (i && (limit > 1) && (i % limit) == 0) + crlf (); + else + for (k = 0; k < max - printed_len; k++) + putc (' ', rl_outstream); + } + } + crlf (); + } + +#if 0 + rl_on_new_line (); +#else + rl_forced_update_display (); + rl_display_fixed = 1; +#endif +} + +static char * +make_quoted_replacement (match, mtype, qc) + char *match; + int mtype; + char *qc; /* Pointer to quoting character, if any */ +{ + int should_quote, do_replace; + char *replacement; + + /* If we are doing completion on quoted substrings, and any matches + contain any of the completer_word_break_characters, then auto- + matically prepend the substring with a quote character (just pick + the first one from the list of such) if it does not already begin + with a quote string. FIXME: Need to remove any such automatically + inserted quote character when it no longer is necessary, such as + if we change the string we are completing on and the new set of + matches don't require a quoted substring. */ + replacement = match; + + should_quote = match && rl_completer_quote_characters && + rl_filename_completion_desired && + rl_filename_quoting_desired; + + if (should_quote) +#if defined (SHELL) + should_quote = should_quote && (!qc || !*qc || *qc == '"' || *qc == '\''); +#else /* !SHELL */ + should_quote = should_quote && (!qc || !*qc); +#endif /* !SHELL */ + + if (should_quote) + { + /* If there is a single match, see if we need to quote it. + This also checks whether the common prefix of several + matches needs to be quoted. */ + should_quote = rl_filename_quote_characters + ? (rl_strpbrk (match, rl_filename_quote_characters) != 0) + : 0; + + do_replace = should_quote ? mtype : NO_MATCH; + /* Quote the replacement, since we found an embedded + word break character in a potential match. */ + if (do_replace != NO_MATCH && rl_filename_quoting_function) + replacement = (*rl_filename_quoting_function) (match, do_replace, qc); + } + return (replacement); +} + +static void +insert_match (match, start, mtype, qc) + char *match; + int start, mtype; + char *qc; +{ + char *replacement; + char oqc; + + oqc = qc ? *qc : '\0'; + replacement = make_quoted_replacement (match, mtype, qc); + + /* Now insert the match. */ + if (replacement) + { + /* Don't double an opening quote character. */ + if (qc && *qc && start && rl_line_buffer[start - 1] == *qc && + replacement[0] == *qc) + start--; + /* If make_quoted_replacement changed the quoting character, remove + the opening quote and insert the (fully-quoted) replacement. */ + else if (qc && (*qc != oqc) && start && rl_line_buffer[start - 1] == oqc && + replacement[0] != oqc) + start--; + _rl_replace_text (replacement, start, rl_point - 1); + if (replacement != match) + free (replacement); + } +} + +/* Append any necessary closing quote and a separator character to the + just-inserted match. If the user has specified that directories + should be marked by a trailing `/', append one of those instead. The + default trailing character is a space. Returns the number of characters + appended. */ +static int +append_to_match (text, delimiter, quote_char) + char *text; + int delimiter, quote_char; +{ + char temp_string[4], *filename; + int temp_string_index; + struct stat finfo; + + temp_string_index = 0; + if (quote_char && rl_point && rl_line_buffer[rl_point - 1] != quote_char) + temp_string[temp_string_index++] = quote_char; + + if (delimiter) + temp_string[temp_string_index++] = delimiter; + else if (rl_completion_append_character) + temp_string[temp_string_index++] = rl_completion_append_character; + + temp_string[temp_string_index++] = '\0'; + + if (rl_filename_completion_desired) + { + filename = tilde_expand (text); + if (stat (filename, &finfo) == 0 && S_ISDIR (finfo.st_mode)) + { + if (_rl_complete_mark_directories && rl_line_buffer[rl_point] != '/') + rl_insert_text ("/"); + } + else + { + if (rl_point == rl_end) + rl_insert_text (temp_string); + } + free (filename); + } + else + { + if (rl_point == rl_end) + rl_insert_text (temp_string); + } + + return (temp_string_index); +} + +static void +insert_all_matches (matches, point, qc) + char **matches; + int point; + char *qc; +{ + int i; + char *rp; + + rl_begin_undo_group (); + /* remove any opening quote character; make_quoted_replacement will add + it back. */ + if (qc && *qc && point && rl_line_buffer[point - 1] == *qc) + point--; + rl_delete_text (point, rl_point); + rl_point = point; + + if (matches[1]) + { + for (i = 1; matches[i]; i++) + { + rp = make_quoted_replacement (matches[i], SINGLE_MATCH, qc); + rl_insert_text (rp); + rl_insert_text (" "); + if (rp != matches[i]) + free (rp); + } + } + else + { + rp = make_quoted_replacement (matches[0], SINGLE_MATCH, qc); + rl_insert_text (rp); + rl_insert_text (" "); + if (rp != matches[0]) + free (rp); + } + rl_end_undo_group (); +} + +/* Complete the word at or before point. + WHAT_TO_DO says what to do with the completion. + `?' means list the possible completions. + TAB means do standard completion. + `*' means insert all of the possible completions. + `!' means to do standard completion, and list all possible completions if + there is more than one. */ +int +rl_complete_internal (what_to_do) + int what_to_do; +{ + char **matches; + Function *our_func; + int start, end, delimiter, found_quote, i; + char *text, *saved_line_buffer; + char quote_char; + + /* Only the completion entry function can change these. */ + rl_filename_completion_desired = 0; + rl_filename_quoting_desired = 1; + rl_completion_type = what_to_do; + + saved_line_buffer = rl_line_buffer ? savestring (rl_line_buffer) : (char *)NULL; + our_func = rl_completion_entry_function + ? rl_completion_entry_function + : (Function *)filename_completion_function; + + /* We now look backwards for the start of a filename/variable word. */ + end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_point) + /* This (possibly) changes rl_point. If it returns a non-zero char, + we know we have an open quote. */ + quote_char = find_completion_word (&found_quote, &delimiter); + + start = rl_point; + rl_point = end; + + text = rl_copy_text (start, end); + matches = gen_completion_matches (text, start, end, our_func, found_quote, quote_char); + + if (matches == 0) + { + ding (); + FREE (saved_line_buffer); + free (text); + return (0); + } + + /* If we are matching filenames, our_func will have been set to + filename_completion_function */ + i = our_func == (Function *)filename_completion_function; + if (postprocess_matches (text, &matches, i) == 0) + { + FREE (saved_line_buffer); + free (text); + return (0); + } + + free (text); + + switch (what_to_do) + { + case TAB: + case '!': + /* Insert the first match with proper quoting. */ + if (*matches[0]) + insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); + + /* If there are more matches, ring the bell to indicate. + If we are in vi mode, Posix.2 says to not ring the bell. + If the `show-all-if-ambiguous' variable is set, display + all the matches immediately. Otherwise, if this was the + only match, and we are hacking files, check the file to + see if it was a directory. If so, and the `mark-directories' + variable is set, add a '/' to the name. If not, and we + are at the end of the line, then add a space. */ + if (matches[1]) + { + if (what_to_do == '!') + { + display_matches (matches); + break; + } + else if (rl_editing_mode != vi_mode) + ding (); /* There are other matches remaining. */ + } + else + append_to_match (matches[0], delimiter, quote_char); + + break; + + case '*': + insert_all_matches (matches, start, "e_char); + break; + + case '?': + display_matches (matches); + break; + + default: + fprintf (stderr, "\r\nreadline: bad value %d for what_to_do in rl_complete\n", what_to_do); + ding (); + FREE (saved_line_buffer); + return 1; + } + + for (i = 0; matches[i]; i++) + free (matches[i]); + free (matches); + + /* Check to see if the line has changed through all of this manipulation. */ + if (saved_line_buffer) + { + completion_changed_buffer = strcmp (rl_line_buffer, saved_line_buffer) != 0; + free (saved_line_buffer); + } + + return 0; +} + +/***************************************************************/ +/* */ +/* Application-callable completion match generator functions */ +/* */ +/***************************************************************/ + +/* Return an array of (char *) which is a list of completions for TEXT. + If there are no completions, return a NULL pointer. + The first entry in the returned array is the substitution for TEXT. + The remaining entries are the possible completions. + The array is terminated with a NULL pointer. + + ENTRY_FUNCTION is a function of two args, and returns a (char *). + The first argument is TEXT. + The second is a state argument; it should be zero on the first call, and + non-zero on subsequent calls. It returns a NULL pointer to the caller + when there are no more matches. + */ +char ** +completion_matches (text, entry_function) + char *text; + CPFunction *entry_function; +{ + /* Number of slots in match_list. */ + int match_list_size; + + /* The list of matches. */ + char **match_list; + + /* Number of matches actually found. */ + int matches; + + /* Temporary string binder. */ + char *string; + + matches = 0; + match_list_size = 10; + match_list = (char **)xmalloc ((match_list_size + 1) * sizeof (char *)); + match_list[1] = (char *)NULL; + + while (string = (*entry_function) (text, matches)) + { + if (matches + 1 == match_list_size) + match_list = (char **)xrealloc + (match_list, ((match_list_size += 10) + 1) * sizeof (char *)); + + match_list[++matches] = string; + match_list[matches + 1] = (char *)NULL; + } + + /* If there were any matches, then look through them finding out the + lowest common denominator. That then becomes match_list[0]. */ + if (matches) + compute_lcd_of_matches (match_list, matches, text); + else /* There were no matches. */ + { + free (match_list); + match_list = (char **)NULL; + } + return (match_list); +} + +/* A completion function for usernames. + TEXT contains a partial username preceded by a random + character (usually `~'). */ +char * +username_completion_function (text, state) + int state; + char *text; +{ +#if defined (__GO32__) || defined (__WIN32__) + return (char *)NULL; +#else /* !__GO32__ */ + static char *username = (char *)NULL; + static struct passwd *entry; + static int namelen, first_char, first_char_loc; + char *value; + + if (state == 0) + { + FREE (username); + + first_char = *text; + first_char_loc = first_char == '~'; + + username = savestring (&text[first_char_loc]); + namelen = strlen (username); + setpwent (); + } + + while (entry = getpwent ()) + { + /* Null usernames should result in all users as possible completions. */ + if (namelen == 0 || (STREQN (username, entry->pw_name, namelen))) + break; + } + + if (entry == 0) + { + endpwent (); + return ((char *)NULL); + } + else + { + value = xmalloc (2 + strlen (entry->pw_name)); + + *value = *text; + + strcpy (value + first_char_loc, entry->pw_name); + + if (first_char == '~') + rl_filename_completion_desired = 1; + + return (value); + } +#endif /* !__GO32__ */ +} + +/* Okay, now we write the entry_function for filename completion. In the + general case. Note that completion in the shell is a little different + because of all the pathnames that must be followed when looking up the + completion for a command. */ +char * +filename_completion_function (text, state) + int state; + char *text; +{ + static DIR *directory = (DIR *)NULL; + static char *filename = (char *)NULL; + static char *dirname = (char *)NULL; + static char *users_dirname = (char *)NULL; + static int filename_len; + char *temp; + int dirlen; + struct dirent *entry; + + /* If we don't have any state, then do some initialization. */ + if (state == 0) + { + /* If we were interrupted before closing the directory or reading + all of its contents, close it. */ + if (directory) + { + closedir (directory); + directory = (DIR *)NULL; + } + FREE (dirname); + FREE (filename); + FREE (users_dirname); + + filename = savestring (text); + if (*text == 0) + text = "."; + dirname = savestring (text); + + temp = strrchr (dirname, '/'); + + if (temp) + { + strcpy (filename, ++temp); + *temp = '\0'; + } + else + { + dirname[0] = '.'; + dirname[1] = '\0'; + } + + /* We aren't done yet. We also support the "~user" syntax. */ + + /* Save the version of the directory that the user typed. */ + users_dirname = savestring (dirname); + + if (*dirname == '~') + { + temp = tilde_expand (dirname); + free (dirname); + dirname = temp; + } + + if (rl_directory_completion_hook && (*rl_directory_completion_hook) (&dirname)) + { + free (users_dirname); + users_dirname = savestring (dirname); + } + + directory = opendir (dirname); + filename_len = strlen (filename); + + rl_filename_completion_desired = 1; + } + + /* At this point we should entertain the possibility of hacking wildcarded + filenames, like /usr/man/man<WILD>/te<TAB>. If the directory name + contains globbing characters, then build an array of directories, and + then map over that list while completing. */ + /* *** UNIMPLEMENTED *** */ + + /* Now that we have some state, we can read the directory. */ + + entry = (struct dirent *)NULL; + while (directory && (entry = readdir (directory))) + { + /* Special case for no filename. + All entries except "." and ".." match. */ + if (filename_len == 0) + { + if (entry->d_name[0] != '.' || + (entry->d_name[1] && + (entry->d_name[1] != '.' || entry->d_name[2]))) + break; + } + else + { + /* Otherwise, if these match up to the length of filename, then + it is a match. */ + if (_rl_completion_case_fold) + { + if ((_rl_to_lower (entry->d_name[0]) == _rl_to_lower (filename[0])) && + (((int)D_NAMLEN (entry)) >= filename_len) && + (_rl_strnicmp (filename, entry->d_name, filename_len) == 0)) + break; + } + else + { + if ((entry->d_name[0] == filename[0]) && + (((int)D_NAMLEN (entry)) >= filename_len) && + (strncmp (filename, entry->d_name, filename_len) == 0)) + break; + } + } + } + + if (entry == 0) + { + if (directory) + { + closedir (directory); + directory = (DIR *)NULL; + } + if (dirname) + { + free (dirname); + dirname = (char *)NULL; + } + if (filename) + { + free (filename); + filename = (char *)NULL; + } + if (users_dirname) + { + free (users_dirname); + users_dirname = (char *)NULL; + } + + return (char *)NULL; + } + else + { + /* dirname && (strcmp (dirname, ".") != 0) */ + if (dirname && (dirname[0] != '.' || dirname[1])) + { + if (rl_complete_with_tilde_expansion && *users_dirname == '~') + { + dirlen = strlen (dirname); + temp = xmalloc (2 + dirlen + D_NAMLEN (entry)); + strcpy (temp, dirname); + /* Canonicalization cuts off any final slash present. We + may need to add it back. */ + if (dirname[dirlen - 1] != '/') + { + temp[dirlen++] = '/'; + temp[dirlen] = '\0'; + } + } + else + { + dirlen = strlen (users_dirname); + temp = xmalloc (1 + dirlen + D_NAMLEN (entry)); + strcpy (temp, users_dirname); + } + + strcpy (temp + dirlen, entry->d_name); /* strcat (temp, entry->d_name); */ + } + else + temp = savestring (entry->d_name); + + return (temp); + } +} + +/* An initial implementation of a menu completion function a la tcsh. The + first time (if the last readline command was not rl_menu_complete), we + generate the list of matches. This code is very similar to the code in + rl_complete_internal -- there should be a way to combine the two. Then, + for each item in the list of matches, we insert the match in an undoable + fashion, with the appropriate character appended (this happens on the + second and subsequent consecutive calls to rl_menu_complete). When we + hit the end of the match list, we restore the original unmatched text, + ring the bell, and reset the counter to zero. */ +int +rl_menu_complete (count, ignore) + int count, ignore; +{ + Function *our_func; + int matching_filenames, found_quote; + + static char *orig_text; + static char **matches = (char **)0; + static int match_list_index = 0; + static int match_list_size = 0; + static int orig_start, orig_end; + static char quote_char; + static int delimiter; + + /* The first time through, we generate the list of matches and set things + up to insert them. */ + if (rl_last_func != rl_menu_complete) + { + /* Clean up from previous call, if any. */ + FREE (orig_text); + if (matches) + { + for (match_list_index = 0; matches[match_list_index]; match_list_index++) + free (matches[match_list_index]); + free (matches); + } + + match_list_index = match_list_size = 0; + matches = (char **)NULL; + + /* Only the completion entry function can change these. */ + rl_filename_completion_desired = 0; + rl_filename_quoting_desired = 1; + rl_completion_type = '%'; + + our_func = rl_completion_entry_function + ? rl_completion_entry_function + : (Function *)filename_completion_function; + + /* We now look backwards for the start of a filename/variable word. */ + orig_end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_point) + /* This (possibly) changes rl_point. If it returns a non-zero char, + we know we have an open quote. */ + quote_char = find_completion_word (&found_quote, &delimiter); + + orig_start = rl_point; + rl_point = orig_end; + + orig_text = rl_copy_text (orig_start, orig_end); + matches = gen_completion_matches (orig_text, orig_start, orig_end, + our_func, found_quote, quote_char); + + /* If we are matching filenames, our_func will have been set to + filename_completion_function */ + matching_filenames = our_func == (Function *)filename_completion_function; + if (matches == 0 || postprocess_matches (orig_text, &matches, matching_filenames) == 0) + { + ding (); + FREE (matches); + matches = (char **)0; + FREE (orig_text); + orig_text = (char *)0; + completion_changed_buffer = 0; + return (0); + } + + for (match_list_size = 0; matches[match_list_size]; match_list_size++) + ; + /* matches[0] is lcd if match_list_size > 1, but the circular buffer + code below should take care of it. */ + } + + /* Now we have the list of matches. Replace the text between + rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with + matches[match_list_index], and add any necessary closing char. */ + + if (matches == 0 || match_list_size == 0) + { + ding (); + FREE (matches); + matches = (char **)0; + completion_changed_buffer = 0; + return (0); + } + + match_list_index = (match_list_index + count) % match_list_size; + if (match_list_index < 0) + match_list_index += match_list_size; + + if (match_list_index == 0) + { + ding (); + insert_match (orig_text, orig_start, MULT_MATCH, "e_char); + } + else + { + insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, "e_char); + append_to_match (matches[match_list_index], delimiter, quote_char); + } + + completion_changed_buffer = 1; + return (0); +} diff --git a/readline/config.h.bot b/readline/config.h.bot new file mode 100644 index 00000000000..d7a6dc45ce4 --- /dev/null +++ b/readline/config.h.bot @@ -0,0 +1,22 @@ +/* config.h.bot */ +/* modify settings or make new ones based on what autoconf tells us. */ + +/* Ultrix botches type-ahead when switching from canonical to + non-canonical mode, at least through version 4.3 */ +#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix) +# define TERMIOS_MISSING +#endif + +#if defined (STRCOLL_BROKEN) +# undef HAVE_STRCOLL +#endif + +#if defined (__STDC__) && defined (HAVE_STDARG_H) +# define PREFER_STDARG +# define USE_VARARGS +#else +# if defined (HAVE_VARARGS_H) +# define PREFER_VARARGS +# define USE_VARARGS +# endif +#endif diff --git a/readline/config.h.in b/readline/config.h.in new file mode 100644 index 00000000000..d7cf6cffa0b --- /dev/null +++ b/readline/config.h.in @@ -0,0 +1,150 @@ +/* config.h.in. Generated automatically from configure.in by autoheader. */ + +/* Define if you have the strcoll function and it is properly defined. */ +#undef HAVE_STRCOLL + +/* Define if on MINIX. */ +#undef _MINIX + +/* Define if the system does not provide POSIX.1 features except + with this defined. */ +#undef _POSIX_1_SOURCE + +/* Define if you need to in order for stat and other things to work. */ +#undef _POSIX_SOURCE + +/* Define as the return type of signal handlers (int or void). */ +#undef RETSIGTYPE + +/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */ +#undef STAT_MACROS_BROKEN + +/* Definitions pulled in from aclocal.m4. */ +#undef VOID_SIGHANDLER + +#undef TIOCSTAT_IN_SYS_IOCTL + +#undef HAVE_GETPW_DECLS + +#undef FIONREAD_IN_SYS_IOCTL + +#undef HAVE_BSD_SIGNALS + +#undef HAVE_LSTAT + +#undef HAVE_POSIX_SIGNALS + +#undef HAVE_POSIX_SIGSETJMP + +#undef HAVE_USG_SIGHOLD + +#undef MUST_REINSTALL_SIGHANDLERS + +#undef SPEED_T_IN_SYS_TYPES + +#undef STRCOLL_BROKEN + +#undef STRUCT_DIRENT_HAS_D_FILENO + +#undef STRUCT_DIRENT_HAS_D_INO + +#undef STRUCT_WINSIZE_IN_SYS_IOCTL + +#undef STRUCT_WINSIZE_IN_TERMIOS + +/* Define if you have the lstat function. */ +#undef HAVE_LSTAT + +/* Define if you have the putenv function. */ +#undef HAVE_PUTENV + +/* Define if you have the select function. */ +#undef HAVE_SELECT + +/* Define if you have the setenv function. */ +#undef HAVE_SETENV + +/* Define if you have the setlocale function. */ +#undef HAVE_SETLOCALE + +/* Define if you have the strcasecmp function. */ +#undef HAVE_STRCASECMP + +/* Define if you have the tcgetattr function. */ +#undef HAVE_TCGETATTR + +/* Define if you have the <dirent.h> header file. */ +#undef HAVE_DIRENT_H + +/* Define if you have the <locale.h> header file. */ +#undef HAVE_LOCALE_H + +/* Define if you have the <ndir.h> header file. */ +#undef HAVE_NDIR_H + +/* Define if you have the <stdarg.h> header file. */ +#undef HAVE_STDARG_H + +/* Define if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define if you have the <sys/dir.h> header file. */ +#undef HAVE_SYS_DIR_H + +/* Define if you have the <sys/file.h> header file. */ +#undef HAVE_SYS_FILE_H + +/* Define if you have the <sys/ndir.h> header file. */ +#undef HAVE_SYS_NDIR_H + +/* Define if you have the <sys/pte.h> header file. */ +#undef HAVE_SYS_PTE_H + +/* Define if you have the <sys/ptem.h> header file. */ +#undef HAVE_SYS_PTEM_H + +/* Define if you have the <sys/select.h> header file. */ +#undef HAVE_SYS_SELECT_H + +/* Define if you have the <sys/stream.h> header file. */ +#undef HAVE_SYS_STREAM_H + +/* Define if you have the <termcap.h> header file. */ +#undef HAVE_TERMCAP_H + +/* Define if you have the <termio.h> header file. */ +#undef HAVE_TERMIO_H + +/* Define if you have the <termios.h> header file. */ +#undef HAVE_TERMIOS_H + +/* Define if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have the <varargs.h> header file. */ +#undef HAVE_VARARGS_H +/* config.h.bot */ +/* modify settings or make new ones based on what autoconf tells us. */ + +/* Ultrix botches type-ahead when switching from canonical to + non-canonical mode, at least through version 4.3 */ +#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix) +# define TERMIOS_MISSING +#endif + +#if defined (STRCOLL_BROKEN) +# undef HAVE_STRCOLL +#endif + +#if defined (__STDC__) && defined (HAVE_STDARG_H) +# define PREFER_STDARG +# define USE_VARARGS +#else +# if defined (HAVE_VARARGS_H) +# define PREFER_VARARGS +# define USE_VARARGS +# endif +#endif diff --git a/readline/configure b/readline/configure new file mode 100755 index 00000000000..f22bd1134dc --- /dev/null +++ b/readline/configure @@ -0,0 +1,2877 @@ +#! /bin/sh + +# From configure.in for Readline 2.2, version 2.07, from autoconf version 2.12.2 +LIBVERSION=2.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.12.2 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: +ac_help="$ac_help +--with-curses use the curses library instead of the termcap library" + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.12.2" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=readline.h + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + + + + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Make sure we can run config.sub. +if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:646: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + + +opt_curses=no +opt_shared=no + +# Check whether --with-curses or --without-curses was given. +if test "${with_curses+set}" = set; then + withval="$with_curses" + opt_curses=$withval +fi + + +if test "$opt_curses" = "yes"; then + prefer_curses=yes +fi + +# We want these before the checks, so the checks can modify their values. +test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:687: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:716: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:766: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:797: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext <<EOF +#line 807 "configure" +#include "confdefs.h" +main(){return(0);} +EOF +if { (eval echo configure:811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:831: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:836: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:864: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:896: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext <<EOF +#line 911 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext <<EOF +#line 928 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:934: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext <<EOF +#line 945 "configure" +#include "confdefs.h" +#include <assert.h> +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:951: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6 +echo "configure:977: checking for minix/config.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 982 "configure" +#include "confdefs.h" +#include <minix/config.h> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + MINIX=yes +else + echo "$ac_t""no" 1>&6 +MINIX= +fi + +if test "$MINIX" = yes; then + cat >> confdefs.h <<\EOF +#define _POSIX_SOURCE 1 +EOF + + cat >> confdefs.h <<\EOF +#define _POSIX_1_SOURCE 2 +EOF + + cat >> confdefs.h <<\EOF +#define _MINIX 1 +EOF + +fi + + + + +if test "x$cross_compiling" = "xyes"; then + case "${host}" in + *-cygwin*) + cross_cache=${srcdir}/cross-build/cygwin.cache + if test -r "${cross_cache}"; then + echo "loading cross-build cache file ${cross_cache}" + . ${cross_cache} + fi + LOCAL_CFLAGS="$LOCAL_CFLAGS -I${srcdir}/../libtermcap" + unset cross_cache + ;; + *) echo "configure: cross-compiling for a non-cygwin target is not supported" >&2 + ;; + esac +fi + +if test "x$cross_compiling" = "xyes"; then + CROSS_COMPILING_FLAG=-DCROSS_COMPILING +else + CROSS_COMPILING_FLAG= +fi + + +if test -z "$CC_FOR_BUILD"; then + if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' + else + CC_FOR_BUILD=gcc + fi +fi + + + + + +# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. +test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" + +if test $ac_cv_prog_gcc = yes; then + echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 +echo "configure:1067: checking whether ${CC-cc} needs -traditional" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_pattern="Autoconf.*'x'" + cat > conftest.$ac_ext <<EOF +#line 1073 "configure" +#include "confdefs.h" +#include <sgtty.h> +Autoconf TIOCGETP +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +else + rm -rf conftest* + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat > conftest.$ac_ext <<EOF +#line 1091 "configure" +#include "confdefs.h" +#include <termio.h> +Autoconf TCGETA +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "$ac_pattern" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi + +echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:1124: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1177: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 +echo "configure:1205: checking return type of signal handlers" >&5 +if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1210 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <signal.h> +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" void (*signal (int, void (*)(int)))(int); +#else +void (*signal ()) (); +#endif + +int main() { +int i; +; return 0; } +EOF +if { (eval echo configure:1227: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_type_signal=void +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_type_signal=int +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_type_signal" 1>&6 +cat >> confdefs.h <<EOF +#define RETSIGTYPE $ac_cv_type_signal +EOF + + + +echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6 +echo "configure:1247: checking whether stat file-mode macros are broken" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1252 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <sys/stat.h> + +#if defined(S_ISBLK) && defined(S_IFDIR) +# if S_ISBLK (S_IFDIR) +You lose. +# endif +#endif + +#if defined(S_ISBLK) && defined(S_IFCHR) +# if S_ISBLK (S_IFCHR) +You lose. +# endif +#endif + +#if defined(S_ISLNK) && defined(S_IFREG) +# if S_ISLNK (S_IFREG) +You lose. +# endif +#endif + +#if defined(S_ISSOCK) && defined(S_IFREG) +# if S_ISSOCK (S_IFREG) +You lose. +# endif +#endif + +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "You lose" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_header_stat_broken=yes +else + rm -rf conftest* + ac_cv_header_stat_broken=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_header_stat_broken" 1>&6 +if test $ac_cv_header_stat_broken = yes; then + cat >> confdefs.h <<\EOF +#define STAT_MACROS_BROKEN 1 +EOF + +fi + +ac_header_dirent=no +for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 +echo "configure:1307: checking for $ac_hdr that defines DIR" >&5 +if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1312 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <$ac_hdr> +int main() { +DIR *dirp = 0; +; return 0; } +EOF +if { (eval echo configure:1320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + eval "ac_cv_header_dirent_$ac_safe=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_dirent_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + ac_header_dirent=$ac_hdr; break +else + echo "$ac_t""no" 1>&6 +fi +done +# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. +if test $ac_header_dirent = dirent.h; then +echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 +echo "configure:1345: checking for opendir in -ldir" >&5 +ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ldir $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1353 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char opendir(); + +int main() { +opendir() +; return 0; } +EOF +if { (eval echo configure:1364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -ldir" +else + echo "$ac_t""no" 1>&6 +fi + +else +echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 +echo "configure:1386: checking for opendir in -lx" >&5 +ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lx $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1394 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char opendir(); + +int main() { +opendir() +; return 0; } +EOF +if { (eval echo configure:1405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -lx" +else + echo "$ac_t""no" 1>&6 +fi + +fi + + +for ac_func in strcasecmp select setenv putenv tcgetattr setlocale lstat +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1431: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1436 "configure" +#include "confdefs.h" +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func(); below. */ +#include <assert.h> +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <<EOF +#define $ac_tr_func 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + + +echo $ac_n "checking for working strcoll""... $ac_c" 1>&6 +echo "configure:1485: checking for working strcoll" >&5 +if eval "test \"`echo '$''{'ac_cv_func_strcoll_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_strcoll_works=no +else + cat > conftest.$ac_ext <<EOF +#line 1493 "configure" +#include "confdefs.h" +#include <string.h> +main () +{ + exit (strcoll ("abc", "def") >= 0 || + strcoll ("ABC", "DEF") >= 0 || + strcoll ("123", "456") >= 0); +} +EOF +if { (eval echo configure:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_func_strcoll_works=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_func_strcoll_works=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_func_strcoll_works" 1>&6 +if test $ac_cv_func_strcoll_works = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_STRCOLL 1 +EOF + +fi + + +for ac_hdr in unistd.h stdlib.h varargs.h stdarg.h string.h \ + sys/ptem.h sys/pte.h sys/stream.h sys/select.h \ + termcap.h termios.h termio.h sys/file.h locale.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1532: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1537 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1542: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + + + +echo $ac_n "checking for type of signal functions""... $ac_c" 1>&6 +echo "configure:1571: checking for type of signal functions" >&5 +if eval "test \"`echo '$''{'bash_cv_signal_vintage'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + cat > conftest.$ac_ext <<EOF +#line 1577 "configure" +#include "confdefs.h" +#include <signal.h> +int main() { + + sigset_t ss; + struct sigaction sa; + sigemptyset(&ss); sigsuspend(&ss); + sigaction(SIGINT, &sa, (struct sigaction *) 0); + sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); + +; return 0; } +EOF +if { (eval echo configure:1590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + bash_cv_signal_vintage=posix +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + + cat > conftest.$ac_ext <<EOF +#line 1599 "configure" +#include "confdefs.h" +#include <signal.h> +int main() { + + int mask = sigmask(SIGINT); + sigsetmask(mask); sigblock(mask); sigpause(mask); + +; return 0; } +EOF +if { (eval echo configure:1609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + bash_cv_signal_vintage=4.2bsd +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + + cat > conftest.$ac_ext <<EOF +#line 1618 "configure" +#include "confdefs.h" + + #include <signal.h> + RETSIGTYPE foo() { } +int main() { + + int mask = sigmask(SIGINT); + sigset(SIGINT, foo); sigrelse(SIGINT); + sighold(SIGINT); sigpause(SIGINT); + +; return 0; } +EOF +if { (eval echo configure:1631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + bash_cv_signal_vintage=svr3 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_signal_vintage=v7 + +fi +rm -f conftest* + +fi +rm -f conftest* + +fi +rm -f conftest* + +fi + +echo "$ac_t""$bash_cv_signal_vintage" 1>&6 +if test "$bash_cv_signal_vintage" = posix; then +cat >> confdefs.h <<\EOF +#define HAVE_POSIX_SIGNALS 1 +EOF + +elif test "$bash_cv_signal_vintage" = "4.2bsd"; then +cat >> confdefs.h <<\EOF +#define HAVE_BSD_SIGNALS 1 +EOF + +elif test "$bash_cv_signal_vintage" = svr3; then +cat >> confdefs.h <<\EOF +#define HAVE_USG_SIGHOLD 1 +EOF + +fi + + + +echo $ac_n "checking if signal handlers must be reinstalled when invoked""... $ac_c" 1>&6 +echo "configure:1672: checking if signal handlers must be reinstalled when invoked" >&5 +if eval "test \"`echo '$''{'bash_cv_must_reinstall_sighandlers'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + { echo "configure: error: cannot check signal handling if cross compiling -- defaulting to no" 1>&2; exit 1; } + bash_cv_must_reinstall_sighandlers=no + +else + cat > conftest.$ac_ext <<EOF +#line 1682 "configure" +#include "confdefs.h" + +#include <signal.h> +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +typedef RETSIGTYPE sigfunc(); + +int nsigint; + +#ifdef HAVE_POSIX_SIGNALS +sigfunc * +set_signal_handler(sig, handler) + int sig; + sigfunc *handler; +{ + struct sigaction act, oact; + act.sa_handler = handler; + act.sa_flags = 0; + sigemptyset (&act.sa_mask); + sigemptyset (&oact.sa_mask); + sigaction (sig, &act, &oact); + return (oact.sa_handler); +} +#else +#define set_signal_handler(s, h) signal(s, h) +#endif + +RETSIGTYPE +sigint(s) +int s; +{ + nsigint++; +} + +main() +{ + nsigint = 0; + set_signal_handler(SIGINT, sigint); + kill((int)getpid(), SIGINT); + kill((int)getpid(), SIGINT); + exit(nsigint != 2); +} + +EOF +if { (eval echo configure:1729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + bash_cv_must_reinstall_sighandlers=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + bash_cv_must_reinstall_sighandlers=yes +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$bash_cv_must_reinstall_sighandlers" 1>&6 +if test $bash_cv_must_reinstall_sighandlers = yes; then +cat >> confdefs.h <<\EOF +#define MUST_REINSTALL_SIGHANDLERS 1 +EOF + +fi + + + +echo $ac_n "checking for presence of POSIX-style sigsetjmp/siglongjmp""... $ac_c" 1>&6 +echo "configure:1754: checking for presence of POSIX-style sigsetjmp/siglongjmp" >&5 +if eval "test \"`echo '$''{'bash_cv_func_sigsetjmp'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + { echo "configure: error: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" 1>&2; exit 1; } + bash_cv_func_sigsetjmp=missing + +else + cat > conftest.$ac_ext <<EOF +#line 1764 "configure" +#include "confdefs.h" + +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif +#include <sys/types.h> +#include <signal.h> +#include <setjmp.h> + +main() +{ +#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) +exit (1); +#else + +int code; +sigset_t set, oset; +sigjmp_buf xx; + +/* get the mask */ +sigemptyset(&set); +sigemptyset(&oset); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); + +/* save it */ +code = sigsetjmp(xx, 1); +if (code) + exit(0); /* could get sigmask and compare to oset here. */ + +/* change it */ +sigaddset(&set, SIGINT); +sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); + +/* and siglongjmp */ +siglongjmp(xx, 10); +exit(1); +#endif +} +EOF +if { (eval echo configure:1805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + bash_cv_func_sigsetjmp=present +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + bash_cv_func_sigsetjmp=missing +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$bash_cv_func_sigsetjmp" 1>&6 +if test $bash_cv_func_sigsetjmp = present; then +cat >> confdefs.h <<\EOF +#define HAVE_POSIX_SIGSETJMP 1 +EOF + +fi + +echo $ac_n "checking for lstat""... $ac_c" 1>&6 +echo "configure:1828: checking for lstat" >&5 +if eval "test \"`echo '$''{'bash_cv_func_lstat'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1833 "configure" +#include "confdefs.h" + +#include <sys/types.h> +#include <sys/stat.h> + +int main() { + lstat(".",(struct stat *)0); +; return 0; } +EOF +if { (eval echo configure:1843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + bash_cv_func_lstat=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_func_lstat=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_func_lstat" 1>&6 +if test $bash_cv_func_lstat = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_LSTAT 1 +EOF + +fi + +echo $ac_n "checking whether programs are able to redeclare getpw functions""... $ac_c" 1>&6 +echo "configure:1864: checking whether programs are able to redeclare getpw functions" >&5 +if eval "test \"`echo '$''{'bash_cv_can_redecl_getpw'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1869 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <pwd.h> +extern struct passwd *getpwent(); +extern struct passwd *getpwuid(); +extern struct passwd *getpwnam(); +int main() { +struct passwd *z; z = getpwent(); z = getpwuid(0); z = getpwnam("root"); +; return 0; } +EOF +if { (eval echo configure:1880: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_can_redecl_getpw=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_can_redecl_getpw=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_can_redecl_getpw" 1>&6 +if test $bash_cv_can_redecl_getpw = no; then +cat >> confdefs.h <<\EOF +#define HAVE_GETPW_DECLS 1 +EOF + +fi + + +echo $ac_n "checking whether or not strcoll and strcmp differ""... $ac_c" 1>&6 +echo "configure:1902: checking whether or not strcoll and strcmp differ" >&5 +if eval "test \"`echo '$''{'bash_cv_func_strcoll_broken'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + { echo "configure: error: cannot check strcoll if cross compiling -- defaulting to no" 1>&2; exit 1; } + bash_cv_func_strcoll_broken=no + +else + cat > conftest.$ac_ext <<EOF +#line 1912 "configure" +#include "confdefs.h" + +#include <stdio.h> +#if defined (HAVE_LOCALE_H) +#include <locale.h> +#endif + +main(c, v) +int c; +char *v[]; +{ + int r1, r2; + char *deflocale, *defcoll; + +#ifdef HAVE_SETLOCALE + deflocale = setlocale(LC_ALL, ""); + defcoll = setlocale(LC_COLLATE, ""); +#endif + +#ifdef HAVE_STRCOLL + /* These two values are taken from tests/glob-test. */ + r1 = strcoll("abd", "aXd"); +#else + r1 = 0; +#endif + r2 = strcmp("abd", "aXd"); + + /* These two should both be greater than 0. It is permissible for + a system to return different values, as long as the sign is the + same. */ + + /* Exit with 1 (failure) if these two values are both > 0, since + this tests whether strcoll(3) is broken with respect to strcmp(3) + in the default locale. */ + exit (r1 > 0 && r2 > 0); +} + +EOF +if { (eval echo configure:1951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + bash_cv_func_strcoll_broken=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + bash_cv_func_strcoll_broken=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$bash_cv_func_strcoll_broken" 1>&6 +if test $bash_cv_func_strcoll_broken = yes; then +cat >> confdefs.h <<\EOF +#define STRCOLL_BROKEN 1 +EOF + +fi + + +echo $ac_n "checking whether signal handlers are of type void""... $ac_c" 1>&6 +echo "configure:1975: checking whether signal handlers are of type void" >&5 +if eval "test \"`echo '$''{'bash_cv_void_sighandler'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1980 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <signal.h> +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" +#endif +void (*signal ()) (); +int main() { +int i; +; return 0; } +EOF +if { (eval echo configure:1995: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_void_sighandler=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_void_sighandler=no +fi +rm -f conftest* +fi +echo "$ac_t""$bash_cv_void_sighandler" 1>&6 +if test $bash_cv_void_sighandler = yes; then +cat >> confdefs.h <<\EOF +#define VOID_SIGHANDLER 1 +EOF + +fi + +echo $ac_n "checking for TIOCGWINSZ in sys/ioctl.h""... $ac_c" 1>&6 +echo "configure:2015: checking for TIOCGWINSZ in sys/ioctl.h" >&5 +if eval "test \"`echo '$''{'bash_cv_tiocgwinsz_in_ioctl'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2020 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <sys/ioctl.h> +int main() { +int x = TIOCGWINSZ; +; return 0; } +EOF +if { (eval echo configure:2028: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_tiocgwinsz_in_ioctl=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_tiocgwinsz_in_ioctl=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_tiocgwinsz_in_ioctl" 1>&6 +if test $bash_cv_tiocgwinsz_in_ioctl = yes; then +cat >> confdefs.h <<\EOF +#define GWINSZ_IN_SYS_IOCTL 1 +EOF + +fi + +echo $ac_n "checking for TIOCSTAT in sys/ioctl.h""... $ac_c" 1>&6 +echo "configure:2049: checking for TIOCSTAT in sys/ioctl.h" >&5 +if eval "test \"`echo '$''{'bash_cv_tiocstat_in_ioctl'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2054 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <sys/ioctl.h> +int main() { +int x = TIOCSTAT; +; return 0; } +EOF +if { (eval echo configure:2062: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_tiocstat_in_ioctl=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_tiocstat_in_ioctl=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_tiocstat_in_ioctl" 1>&6 +if test $bash_cv_tiocstat_in_ioctl = yes; then +cat >> confdefs.h <<\EOF +#define TIOCSTAT_IN_SYS_IOCTL 1 +EOF + +fi + +echo $ac_n "checking for FIONREAD in sys/ioctl.h""... $ac_c" 1>&6 +echo "configure:2083: checking for FIONREAD in sys/ioctl.h" >&5 +if eval "test \"`echo '$''{'bash_cv_fionread_in_ioctl'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2088 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <sys/ioctl.h> +int main() { +int x = FIONREAD; +; return 0; } +EOF +if { (eval echo configure:2096: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_fionread_in_ioctl=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_fionread_in_ioctl=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_fionread_in_ioctl" 1>&6 +if test $bash_cv_fionread_in_ioctl = yes; then +cat >> confdefs.h <<\EOF +#define FIONREAD_IN_SYS_IOCTL 1 +EOF + +fi + +echo $ac_n "checking for speed_t in sys/types.h""... $ac_c" 1>&6 +echo "configure:2117: checking for speed_t in sys/types.h" >&5 +if eval "test \"`echo '$''{'bash_cv_speed_t_in_sys_types'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2122 "configure" +#include "confdefs.h" +#include <sys/types.h> +int main() { +speed_t x; +; return 0; } +EOF +if { (eval echo configure:2129: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_speed_t_in_sys_types=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_speed_t_in_sys_types=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_speed_t_in_sys_types" 1>&6 +if test $bash_cv_speed_t_in_sys_types = yes; then +cat >> confdefs.h <<\EOF +#define SPEED_T_IN_SYS_TYPES 1 +EOF + +fi + +echo $ac_n "checking for struct winsize in sys/ioctl.h and termios.h""... $ac_c" 1>&6 +echo "configure:2150: checking for struct winsize in sys/ioctl.h and termios.h" >&5 +if eval "test \"`echo '$''{'bash_cv_struct_winsize_header'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2155 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <sys/ioctl.h> +int main() { +struct winsize x; +; return 0; } +EOF +if { (eval echo configure:2163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_struct_winsize_header=ioctl_h +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + cat > conftest.$ac_ext <<EOF +#line 2171 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <termios.h> +int main() { +struct winsize x; +; return 0; } +EOF +if { (eval echo configure:2179: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_struct_winsize_header=termios_h +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_struct_winsize_header=other +fi +rm -f conftest* + +fi +rm -f conftest* +fi + +if test $bash_cv_struct_winsize_header = ioctl_h; then + echo "$ac_t""sys/ioctl.h" 1>&6 + cat >> confdefs.h <<\EOF +#define STRUCT_WINSIZE_IN_SYS_IOCTL 1 +EOF + +elif test $bash_cv_struct_winsize_header = termios_h; then + echo "$ac_t""termios.h" 1>&6 + cat >> confdefs.h <<\EOF +#define STRUCT_WINSIZE_IN_TERMIOS 1 +EOF + +else + echo "$ac_t""not found" 1>&6 +fi + + +echo $ac_n "checking if struct dirent has a d_ino member""... $ac_c" 1>&6 +echo "configure:2212: checking if struct dirent has a d_ino member" >&5 +if eval "test \"`echo '$''{'bash_cv_dirent_has_dino'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2217 "configure" +#include "confdefs.h" + +#include <stdio.h> +#include <sys/types.h> +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include <dirent.h> +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include <sys/ndir.h> +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include <sys/dir.h> +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include <ndir.h> +# endif +#endif /* HAVE_DIRENT_H */ + +int main() { + +struct dirent d; int z; z = d.d_ino; + +; return 0; } +EOF +if { (eval echo configure:2246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_dirent_has_dino=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_dirent_has_dino=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_dirent_has_dino" 1>&6 +if test $bash_cv_dirent_has_dino = yes; then +cat >> confdefs.h <<\EOF +#define STRUCT_DIRENT_HAS_D_INO 1 +EOF + +fi + + +echo $ac_n "checking if struct dirent has a d_fileno member""... $ac_c" 1>&6 +echo "configure:2268: checking if struct dirent has a d_fileno member" >&5 +if eval "test \"`echo '$''{'bash_cv_dirent_has_d_fileno'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2273 "configure" +#include "confdefs.h" + +#include <stdio.h> +#include <sys/types.h> +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include <dirent.h> +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include <sys/ndir.h> +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include <sys/dir.h> +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include <ndir.h> +# endif +#endif /* HAVE_DIRENT_H */ + +int main() { + +struct dirent d; int z; z = d.d_fileno; + +; return 0; } +EOF +if { (eval echo configure:2302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bash_cv_dirent_has_d_fileno=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bash_cv_dirent_has_d_fileno=no +fi +rm -f conftest* +fi + +echo "$ac_t""$bash_cv_dirent_has_d_fileno" 1>&6 +if test $bash_cv_dirent_has_d_fileno = yes; then +cat >> confdefs.h <<\EOF +#define STRUCT_DIRENT_HAS_D_FILENO 1 +EOF + +fi + + +case "$host_os" in +aix*) prefer_curses=yes ;; +esac + +if test "X$bash_cv_termcap_lib" = "X"; then +_bash_needmsg=yes +else +echo $ac_n "checking which library has the termcap functions""... $ac_c" 1>&6 +echo "configure:2331: checking which library has the termcap functions" >&5 +_bash_needmsg= +fi +if eval "test \"`echo '$''{'bash_cv_termcap_lib'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6 +echo "configure:2338: checking for tgetent in -ltermcap" >&5 +ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-ltermcap $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2346 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char tgetent(); + +int main() { +tgetent() +; return 0; } +EOF +if { (eval echo configure:2357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + bash_cv_termcap_lib=libtermcap +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for tgetent in -lcurses""... $ac_c" 1>&6 +echo "configure:2376: checking for tgetent in -lcurses" >&5 +ac_lib_var=`echo curses'_'tgetent | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lcurses $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2384 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char tgetent(); + +int main() { +tgetent() +; return 0; } +EOF +if { (eval echo configure:2395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + bash_cv_termcap_lib=libcurses +else + echo "$ac_t""no" 1>&6 +echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6 +echo "configure:2414: checking for tgetent in -lncurses" >&5 +ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lncurses $LIBS" +cat > conftest.$ac_ext <<EOF +#line 2422 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char tgetent(); + +int main() { +tgetent() +; return 0; } +EOF +if { (eval echo configure:2433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + bash_cv_termcap_lib=libncurses +else + echo "$ac_t""no" 1>&6 +bash_cv_termcap_lib=gnutermcap +fi + +fi + +fi + +fi + +if test "X$_bash_needmsg" = "Xyes"; then +echo $ac_n "checking which library has the termcap functions""... $ac_c" 1>&6 +echo "configure:2462: checking which library has the termcap functions" >&5 +fi +echo "$ac_t""using $bash_cv_termcap_lib" 1>&6 +if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then +LDFLAGS="$LDFLAGS -L./lib/termcap" +TERMCAP_LIB="./lib/termcap/libtermcap.a" +TERMCAP_DEP="./lib/termcap/libtermcap.a" +elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then +TERMCAP_LIB=-ltermcap +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libncurses; then +TERMCAP_LIB=-lncurses +TERMCAP_DEP= +else +TERMCAP_LIB=-lcurses +TERMCAP_DEP= +fi + +if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then + TERMCAP_LIB=-ltermcap #default +fi + +case "$host_cpu" in +*cray*) LOCAL_CFLAGS=-DCRAY ;; +esac + +case "$host_os" in +isc*) LOCAL_CFLAGS=-Disc386 ;; +esac + +BUILD_DIR=`pwd` + + + + + + + + + + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set) 2>&1 | grep ac_space` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +DEFS=-DHAVE_CONFIG_H + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS <<EOF +#! /bin/sh +# Generated automatically by configure. +# Run this file to recreate the current configuration. +# This directory was configured as follows, +# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.12.2" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir +ac_given_INSTALL="$INSTALL" + +trap 'rm -fr `echo "Makefile doc/Makefile examples/Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@CC@%$CC%g +s%@CPP@%$CPP%g +s%@CROSS_COMPILING_FLAG@%$CROSS_COMPILING_FLAG%g +s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@RANLIB@%$RANLIB%g +s%@BUILD_DIR@%$BUILD_DIR%g +s%@LOCAL_CFLAGS@%$LOCAL_CFLAGS%g +s%@LOCAL_LDFLAGS@%$LOCAL_LDFLAGS%g +s%@LOCAL_DEFS@%$LOCAL_DEFS%g +s%@LIBVERSION@%$LIBVERSION%g +s%@TERMCAP_LIB@%$TERMCAP_LIB%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <<EOF + +CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile examples/Makefile"} +EOF +cat >> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + case "$ac_given_INSTALL" in + [/$]*) INSTALL="$ac_given_INSTALL" ;; + *) INSTALL="$ac_dots$ac_given_INSTALL" ;; + esac + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +s%@INSTALL@%$INSTALL%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' +ac_dC='\3' +ac_dD='%g' +# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". +ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='\([ ]\)%\1#\2define\3' +ac_uC=' ' +ac_uD='\4%g' +# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_eB='$%\1#\2define\3' +ac_eC=' ' +ac_eD='%g' + +if test "${CONFIG_HEADERS+set}" != set; then +EOF +cat >> $CONFIG_STATUS <<EOF + CONFIG_HEADERS="config.h" +EOF +cat >> $CONFIG_STATUS <<\EOF +fi +for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + echo creating $ac_file + + rm -f conftest.frag conftest.in conftest.out + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + cat $ac_file_inputs > conftest.in + +EOF + +# Transform confdefs.h into a sed script conftest.vals that substitutes +# the proper values into config.h.in to produce config.h. And first: +# Protect against being on the right side of a sed subst in config.status. +# Protect against being in an unquoted here document in config.status. +rm -f conftest.vals +cat > conftest.hdr <<\EOF +s/[\\&%]/\\&/g +s%[\\$`]%\\&%g +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp +s%ac_d%ac_u%gp +s%ac_u%ac_e%gp +EOF +sed -n -f conftest.hdr confdefs.h > conftest.vals +rm -f conftest.hdr + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >> conftest.vals <<\EOF +s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% +EOF + +# Break up conftest.vals because some shells have a limit on +# the size of here documents, and old seds have small limits too. + +rm -f conftest.tail +while : +do + ac_lines=`grep -c . conftest.vals` + # grep -c gives empty output for an empty file on some AIX systems. + if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi + # Write a limited-size here document to conftest.frag. + echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + echo 'CEOF + sed -f conftest.frag conftest.in > conftest.out + rm -f conftest.in + mv conftest.out conftest.in +' >> $CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail + rm -f conftest.vals + mv conftest.tail conftest.vals +done +rm -f conftest.vals + +cat >> $CONFIG_STATUS <<\EOF + rm -f conftest.frag conftest.h + echo "/* $ac_file. Generated automatically by configure. */" > conftest.h + cat conftest.in >> conftest.h + rm -f conftest.in + if cmp -s $ac_file conftest.h 2>/dev/null; then + echo "$ac_file is unchanged" + rm -f conftest.h + else + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + fi + rm -f $ac_file + mv conftest.h $ac_file + fi +fi; done + +EOF +cat >> $CONFIG_STATUS <<EOF + +EOF +cat >> $CONFIG_STATUS <<\EOF + +# Makefile uses this timestamp file to record whether config.h is up to date. +echo > stamp-h + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/readline/configure.in b/readline/configure.in new file mode 100644 index 00000000000..1e8e7754da2 --- /dev/null +++ b/readline/configure.in @@ -0,0 +1,151 @@ +dnl +dnl Configure script for readline library +dnl +dnl report bugs to chet@po.cwru.edu +dnl +dnl Process this file with autoconf to produce a configure script. +AC_REVISION([for Readline 2.2, version 2.07, from autoconf version] AC_ACVERSION) +LIBVERSION=2.2 + +AC_INIT(readline.h) +AC_CONFIG_HEADER(config.h) + +dnl make sure we are using a recent autoconf version +AC_PREREQ(2.10) + +dnl AC_CONFIG_AUX_DIR(./support) + +AC_CANONICAL_HOST + +dnl configure defaults +opt_curses=no +opt_shared=no + +dnl arguments to configure +AC_ARG_WITH(curses, --with-curses use the curses library instead of the termcap library,opt_curses=$withval) + +if test "$opt_curses" = "yes"; then + prefer_curses=yes +fi + +# We want these before the checks, so the checks can modify their values. +test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 + +AC_PROG_CC +AC_MINIX + + +dnl BEGIN changes for CYGNUS cross-building for Cygwin + +dnl load up the cross-building cache file -- add more cases and cache +dnl files as necessary +if test "x$cross_compiling" = "xyes"; then + case "${host}" in + *-cygwin*) + cross_cache=${srcdir}/cross-build/cygwin.cache + if test -r "${cross_cache}"; then + echo "loading cross-build cache file ${cross_cache}" + . ${cross_cache} + fi + LOCAL_CFLAGS="$LOCAL_CFLAGS -I${srcdir}/../libtermcap" + unset cross_cache + ;; + *) echo "configure: cross-compiling for a non-cygwin target is not supported" >&2 + ;; + esac +fi + +if test "x$cross_compiling" = "xyes"; then + CROSS_COMPILING_FLAG=-DCROSS_COMPILING +else + CROSS_COMPILING_FLAG= +fi +AC_SUBST(CROSS_COMPILING_FLAG) + +if test -z "$CC_FOR_BUILD"; then + if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' + else + CC_FOR_BUILD=gcc + fi +fi +AC_SUBST(CC_FOR_BUILD) + +dnl END changes for CYGNUS cross-building for Cygwin + + + +# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. +test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" + +AC_PROG_GCC_TRADITIONAL +AC_PROG_INSTALL +AC_PROG_RANLIB + +AC_RETSIGTYPE + +AC_HEADER_STAT +AC_HEADER_DIRENT + +AC_CHECK_FUNCS(strcasecmp select setenv putenv tcgetattr setlocale lstat) + +AC_FUNC_STRCOLL + +AC_CHECK_HEADERS(unistd.h stdlib.h varargs.h stdarg.h string.h \ + sys/ptem.h sys/pte.h sys/stream.h sys/select.h \ + termcap.h termios.h termio.h sys/file.h locale.h) + +BASH_SIGNAL_CHECK +BASH_REINSTALL_SIGHANDLERS + +BASH_FUNC_POSIX_SETJMP +BASH_FUNC_LSTAT +BASH_CHECK_GETPW_FUNCS +BASH_FUNC_STRCOLL + +BASH_TYPE_SIGHANDLER +BASH_HAVE_TIOCGWINSZ +BASH_HAVE_TIOCSTAT +BASH_HAVE_FIONREAD +BASH_MISC_SPEED_T +BASH_STRUCT_WINSIZE +BASH_STRUCT_DIRENT_D_INO +BASH_STRUCT_DIRENT_D_FILENO + +dnl yuck +case "$host_os" in +aix*) prefer_curses=yes ;; +esac +BASH_CHECK_LIB_TERMCAP +if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then + TERMCAP_LIB=-ltermcap #default +fi + +case "$host_cpu" in +*cray*) LOCAL_CFLAGS=-DCRAY ;; +esac + +case "$host_os" in +isc*) LOCAL_CFLAGS=-Disc386 ;; +esac + +BUILD_DIR=`pwd` +AC_SUBST(BUILD_DIR) + +AC_SUBST(CFLAGS) +AC_SUBST(LOCAL_CFLAGS) +AC_SUBST(LOCAL_LDFLAGS) +AC_SUBST(LOCAL_DEFS) + +AC_SUBST(host_cpu) +AC_SUBST(host_os) + +AC_SUBST(LIBVERSION) + +AC_SUBST(TERMCAP_LIB) + +AC_OUTPUT([Makefile doc/Makefile examples/Makefile], +[ +# Makefile uses this timestamp file to record whether config.h is up to date. +echo > stamp-h +]) diff --git a/readline/cross-build/cygwin.cache b/readline/cross-build/cygwin.cache new file mode 100644 index 00000000000..2fb07596a2c --- /dev/null +++ b/readline/cross-build/cygwin.cache @@ -0,0 +1,45 @@ +# This file is a shell script that caches the results of configure +# tests for CYGWIN32 so they don't need to be done when cross-compiling. + +# AC_FUNC_GETPGRP should also define GETPGRP_VOID +ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'} +# AC_FUNC_SETVBUF_REVERSED should not define anything else +ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'} +# on CYGWIN32, system calls do not restart +ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'} +bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'} + +# these may be necessary, but they are currently commented out +#ac_cv_c_bigendian=${ac_cv_c_bigendian='no'} +ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'} +ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} +ac_cv_sizeof_long=${ac_cv_sizeof_long='4'} + +bash_cv_dup2_broken=${bash_cv_dup2_broken='no'} +bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'} +bash_cv_type_rlimit=${bash_cv_type_rlimit='long'} +bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'} +bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'} +bash_cv_sys_siglist=${bash_cv_sys_siglist='no'} +bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'} +bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'} +bash_cv_printf_declared=${bash_cv_printf_declared='yes'} +bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'} +bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'} +bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'} +bash_cv_job_control_missing=${bash_cv_job_control_missing='present'} +bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='missing'} +bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='present'} +bash_cv_mail_dir=${bash_cv_mail_dir='unknown'} +bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'} + +bash_cv_type_int32_t=${bash_cv_type_int32_t='int'} +bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'} +ac_cv_header_termcap_h=${ac_cv_header_termcap_h='yes'} +ac_cv_header_termios_h=${ac_cv_header_termios_h='yes'} +bash_cv_termcap_lib=${bash_cv_termcap_lib='-ltermcap'} + +bash_cv_tiocgwinsz_in_ioctl=${bash_cv_tiocgwinsz_in_ioctl='yes'} +ac_cv_lib_termcap_tgetent=${ac_cv_lib_termcap_tgetent='yes'} + +# end of cross-build/cygwin32.cache diff --git a/readline/display.c b/readline/display.c new file mode 100644 index 00000000000..f7ec69b247c --- /dev/null +++ b/readline/display.c @@ -0,0 +1,1545 @@ +/* display.c -- readline redisplay facility. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#include "posixstat.h" + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> + +#if defined (__GO32__) +# include <go32.h> +# include <pc.h> +#endif /* __GO32__ */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Termcap library stuff. */ +#include "tcap.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +/* Global and pseudo-global variables and functions + imported from readline.c. */ +extern char *rl_prompt; +extern int readline_echoing_p; + +extern int _rl_output_meta_chars; +extern int _rl_horizontal_scroll_mode; +extern int _rl_mark_modified_lines; +extern int _rl_prefer_visible_bell; + +/* Variables and functions imported from terminal.c */ +extern void _rl_output_some_chars (); +#ifdef _MINIX +extern void _rl_output_character_function (); +#else +extern int _rl_output_character_function (); +#endif +extern int _rl_backspace (); + +extern char *term_clreol, *term_clrpag; +extern char *term_im, *term_ic, *term_ei, *term_DC; +extern char *term_up, *term_dc, *term_cr, *term_IC; +extern int screenheight, screenwidth, screenchars; +extern int terminal_can_insert, _rl_term_autowrap; + +/* Pseudo-global functions (local to the readline library) exported + by this file. */ +void _rl_move_cursor_relative (), _rl_output_some_chars (); +void _rl_move_vert (); +void _rl_clear_to_eol (), _rl_clear_screen (); + +static void update_line (), space_to_eol (); +static void delete_chars (), insert_some_chars (); +static void cr (); + +static int *inv_lbreaks, *vis_lbreaks; + +extern char *xmalloc (), *xrealloc (); + +/* Heuristic used to decide whether it is faster to move from CUR to NEW + by backing up or outputting a carriage return and moving forward. */ +#define CR_FASTER(new, cur) (((new) + 1) < ((cur) - (new))) + +/* **************************************************************** */ +/* */ +/* Display stuff */ +/* */ +/* **************************************************************** */ + +/* This is the stuff that is hard for me. I never seem to write good + display routines in C. Let's see how I do this time. */ + +/* (PWP) Well... Good for a simple line updater, but totally ignores + the problems of input lines longer than the screen width. + + update_line and the code that calls it makes a multiple line, + automatically wrapping line update. Careful attention needs + to be paid to the vertical position variables. */ + +/* Keep two buffers; one which reflects the current contents of the + screen, and the other to draw what we think the new contents should + be. Then compare the buffers, and make whatever changes to the + screen itself that we should. Finally, make the buffer that we + just drew into be the one which reflects the current contents of the + screen, and place the cursor where it belongs. + + Commands that want to can fix the display themselves, and then let + this function know that the display has been fixed by setting the + RL_DISPLAY_FIXED variable. This is good for efficiency. */ + +/* Application-specific redisplay function. */ +VFunction *rl_redisplay_function = rl_redisplay; + +/* Global variables declared here. */ +/* What YOU turn on when you have handled all redisplay yourself. */ +int rl_display_fixed = 0; + +int _rl_suppress_redisplay = 0; + +/* The stuff that gets printed out before the actual text of the line. + This is usually pointing to rl_prompt. */ +char *rl_display_prompt = (char *)NULL; + +/* Pseudo-global variables declared here. */ +/* The visible cursor position. If you print some text, adjust this. */ +int _rl_last_c_pos = 0; +int _rl_last_v_pos = 0; + +/* Number of lines currently on screen minus 1. */ +int _rl_vis_botlin = 0; + +/* Variables used only in this file. */ +/* The last left edge of text that was displayed. This is used when + doing horizontal scrolling. It shifts in thirds of a screenwidth. */ +static int last_lmargin; + +/* The line display buffers. One is the line currently displayed on + the screen. The other is the line about to be displayed. */ +static char *visible_line = (char *)NULL; +static char *invisible_line = (char *)NULL; + +/* A buffer for `modeline' messages. */ +static char msg_buf[128]; + +/* Non-zero forces the redisplay even if we thought it was unnecessary. */ +static int forced_display; + +/* Default and initial buffer size. Can grow. */ +static int line_size = 1024; + +static char *local_prompt, *local_prompt_prefix; +static int visible_length, prefix_length; + +/* The number of invisible characters in the line currently being + displayed on the screen. */ +static int visible_wrap_offset; + +/* static so it can be shared between rl_redisplay and update_line */ +static int wrap_offset; + +/* The index of the last invisible_character in the prompt string. */ +static int last_invisible; + +/* The length (buffer offset) of the first line of the last (possibly + multi-line) buffer displayed on the screen. */ +static int visible_first_line_len; + +/* Expand the prompt string S and return the number of visible + characters in *LP, if LP is not null. This is currently more-or-less + a placeholder for expansion. LIP, if non-null is a place to store the + index of the last invisible character in ther eturned string. */ + +/* Current implementation: + \001 (^A) start non-visible characters + \002 (^B) end non-visible characters + all characters except \001 and \002 (following a \001) are copied to + the returned string; all characters except those between \001 and + \002 are assumed to be `visible'. */ + +static char * +expand_prompt (pmt, lp, lip) + char *pmt; + int *lp, *lip; +{ + char *r, *ret, *p; + int l, rl, last, ignoring; + + /* Short-circuit if we can. */ + if (strchr (pmt, RL_PROMPT_START_IGNORE) == 0) + { + r = savestring (pmt); + if (lp) + *lp = strlen (r); + return r; + } + + l = strlen (pmt); + r = ret = xmalloc (l + 1); + + for (rl = ignoring = last = 0, p = pmt; p && *p; p++) + { + /* This code strips the invisible character string markers + RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE */ + if (*p == RL_PROMPT_START_IGNORE) + { + ignoring++; + continue; + } + else if (ignoring && *p == RL_PROMPT_END_IGNORE) + { + ignoring = 0; + last = r - ret - 1; + continue; + } + else + { + *r++ = *p; + if (!ignoring) + rl++; + } + } + + *r = '\0'; + if (lp) + *lp = rl; + if (lip) + *lip = last; + return ret; +} + +/* + * Expand the prompt string into the various display components, if + * necessary. + * + * local_prompt = expanded last line of string in rl_display_prompt + * (portion after the final newline) + * local_prompt_prefix = portion before last newline of rl_display_prompt, + * expanded via expand_prompt + * visible_length = number of visible characters in local_prompt + * prefix_length = number of visible characters in local_prompt_prefix + * + * This function is called once per call to readline(). It may also be + * called arbitrarily to expand the primary prompt. + * + * The return value is the number of visible characters on the last line + * of the (possibly multi-line) prompt. + */ +int +rl_expand_prompt (prompt) + char *prompt; +{ + char *p, *t; + int c; + + /* Clear out any saved values. */ + if (local_prompt) + free (local_prompt); + if (local_prompt_prefix) + free (local_prompt_prefix); + local_prompt = local_prompt_prefix = (char *)0; + last_invisible = 0; + + if (prompt == 0 || *prompt == 0) + return (0); + + p = strrchr (prompt, '\n'); + if (!p) + { + /* The prompt is only one line. */ + local_prompt = expand_prompt (prompt, &visible_length, &last_invisible); + local_prompt_prefix = (char *)0; + return (visible_length); + } + else + { + /* The prompt spans multiple lines. */ + t = ++p; + local_prompt = expand_prompt (p, &visible_length, &last_invisible); + c = *t; *t = '\0'; + /* The portion of the prompt string up to and including the + final newline is now null-terminated. */ + local_prompt_prefix = expand_prompt (prompt, &prefix_length, (int *)NULL); + *t = c; + return (prefix_length); + } +} + +/* Basic redisplay algorithm. */ +void +rl_redisplay () +{ + register int in, out, c, linenum, cursor_linenum; + register char *line; + int c_pos, inv_botlin, lb_botlin, lb_linenum; + int newlines, lpos, temp; + char *prompt_this_line; + + if (!readline_echoing_p) + return; + + if (!rl_display_prompt) + rl_display_prompt = ""; + + if (invisible_line == 0) + { + visible_line = xmalloc (line_size); + invisible_line = xmalloc (line_size); + for (in = 0; in < line_size; in++) + { + visible_line[in] = 0; + invisible_line[in] = 1; + } + + /* should be enough, but then again, this is just for testing. */ + inv_lbreaks = (int *)malloc (256 * sizeof (int)); + vis_lbreaks = (int *)malloc (256 * sizeof (int)); + inv_lbreaks[0] = vis_lbreaks[0] = 0; + + rl_on_new_line (); + } + + /* Draw the line into the buffer. */ + c_pos = -1; + + line = invisible_line; + out = inv_botlin = 0; + + /* Mark the line as modified or not. We only do this for history + lines. */ + if (_rl_mark_modified_lines && current_history () && rl_undo_list) + { + line[out++] = '*'; + line[out] = '\0'; + } + + /* If someone thought that the redisplay was handled, but the currently + visible line has a different modification state than the one about + to become visible, then correct the caller's misconception. */ + if (visible_line[0] != invisible_line[0]) + rl_display_fixed = 0; + + /* If the prompt to be displayed is the `primary' readline prompt (the + one passed to readline()), use the values we have already expanded. + If not, use what's already in rl_display_prompt. WRAP_OFFSET is the + number of non-visible characters in the prompt string. */ + if (rl_display_prompt == rl_prompt || local_prompt) + { + int local_len = local_prompt ? strlen (local_prompt) : 0; + if (local_prompt_prefix && forced_display) + _rl_output_some_chars (local_prompt_prefix, strlen (local_prompt_prefix)); + + if (local_len > 0) + { + strncpy (line + out, local_prompt, local_len); + out += local_len; + } + line[out] = '\0'; + wrap_offset = local_len - visible_length; + } + else + { + int pmtlen; + prompt_this_line = strrchr (rl_display_prompt, '\n'); + if (!prompt_this_line) + prompt_this_line = rl_display_prompt; + else + { + prompt_this_line++; + if (forced_display) + { + _rl_output_some_chars (rl_display_prompt, prompt_this_line - rl_display_prompt); + /* Make sure we are at column zero even after a newline, + regardless of the state of terminal output processing. */ + if (prompt_this_line[-2] != '\r') + cr (); + } + } + + pmtlen = strlen (prompt_this_line); + strncpy (line + out, prompt_this_line, pmtlen); + out += pmtlen; + line[out] = '\0'; + wrap_offset = 0; + } + +#define CHECK_LPOS() \ + do { \ + lpos++; \ + if (lpos >= screenwidth) \ + { \ + inv_lbreaks[++newlines] = out; \ + lpos = 0; \ + } \ + } while (0) + + /* inv_lbreaks[i] is where line i starts in the buffer. */ + inv_lbreaks[newlines = 0] = 0; + lpos = out - wrap_offset; + + /* XXX - what if lpos is already >= screenwidth before we start drawing the + contents of the command line? */ + while (lpos >= screenwidth) + { +#if 0 + temp = ((newlines + 1) * screenwidth) - ((newlines == 0) ? wrap_offset : 0); +#else + /* XXX - possible fix from Darin Johnson <darin@acuson.com> for prompt + string with invisible characters that is longer than the screen + width. */ + temp = ((newlines + 1) * screenwidth) + ((newlines == 0) ? wrap_offset : 0); +#endif + inv_lbreaks[++newlines] = temp; + lpos -= screenwidth; + } + + lb_linenum = 0; + for (in = 0; in < rl_end; in++) + { + c = (unsigned char)rl_line_buffer[in]; + + if (out + 8 >= line_size) /* XXX - 8 for \t */ + { + line_size *= 2; + visible_line = xrealloc (visible_line, line_size); + invisible_line = xrealloc (invisible_line, line_size); + line = invisible_line; + } + + if (in == rl_point) + { + c_pos = out; + lb_linenum = newlines; + } + + if (META_CHAR (c)) + { + if (_rl_output_meta_chars == 0) + { + sprintf (line + out, "\\%o", c); + + if (lpos + 4 >= screenwidth) + { + temp = screenwidth - lpos; + inv_lbreaks[++newlines] = out + temp; + lpos = 4 - temp; + } + else + lpos += 4; + + out += 4; + } + else + { + line[out++] = c; + CHECK_LPOS(); + } + } +#if defined (DISPLAY_TABS) + else if (c == '\t') + { + register int temp, newout; + newout = (out | (int)7) + 1; + temp = newout - out; + if (lpos + temp >= screenwidth) + { + register int temp2; + temp2 = screenwidth - lpos; + inv_lbreaks[++newlines] = out + temp2; + lpos = temp - temp2; + while (out < newout) + line[out++] = ' '; + } + else + { + while (out < newout) + line[out++] = ' '; + lpos += temp; + } + } +#endif + else if (c == '\n' && _rl_horizontal_scroll_mode == 0 && term_up && *term_up) + { + line[out++] = '\0'; /* XXX - sentinel */ + inv_lbreaks[++newlines] = out; + lpos = 0; + } + else if (CTRL_CHAR (c) || c == RUBOUT) + { + line[out++] = '^'; + CHECK_LPOS(); + line[out++] = CTRL_CHAR (c) ? UNCTRL (c) : '?'; + CHECK_LPOS(); + } + else + { + line[out++] = c; + CHECK_LPOS(); + } + } + line[out] = '\0'; + if (c_pos < 0) + { + c_pos = out; + lb_linenum = newlines; + } + + inv_botlin = lb_botlin = newlines; + inv_lbreaks[newlines+1] = out; + cursor_linenum = lb_linenum; + + /* C_POS == position in buffer where cursor should be placed. */ + + /* PWP: now is when things get a bit hairy. The visible and invisible + line buffers are really multiple lines, which would wrap every + (screenwidth - 1) characters. Go through each in turn, finding + the changed region and updating it. The line order is top to bottom. */ + + /* If we can move the cursor up and down, then use multiple lines, + otherwise, let long lines display in a single terminal line, and + horizontally scroll it. */ + + if (_rl_horizontal_scroll_mode == 0 && term_up && *term_up) + { + int nleft, pos, changed_screen_line; + + if (!rl_display_fixed || forced_display) + { + forced_display = 0; + + /* If we have more than a screenful of material to display, then + only display a screenful. We should display the last screen, + not the first. */ + if (out >= screenchars) + out = screenchars - 1; + + /* The first line is at character position 0 in the buffer. The + second and subsequent lines start at inv_lbreaks[N], offset by + OFFSET (which has already been calculated above). */ + +#define W_OFFSET(line, offset) ((line) == 0 ? offset : 0) +#define VIS_LLEN(l) ((l) > _rl_vis_botlin ? 0 : (vis_lbreaks[l+1] - vis_lbreaks[l])) +#define INV_LLEN(l) (inv_lbreaks[l+1] - inv_lbreaks[l]) +#define VIS_CHARS(line) (visible_line + vis_lbreaks[line]) +#define VIS_LINE(line) ((line) > _rl_vis_botlin) ? "" : VIS_CHARS(line) +#define INV_LINE(line) (invisible_line + inv_lbreaks[line]) + + /* For each line in the buffer, do the updating display. */ + for (linenum = 0; linenum <= inv_botlin; linenum++) + { + update_line (VIS_LINE(linenum), INV_LINE(linenum), linenum, + VIS_LLEN(linenum), INV_LLEN(linenum), inv_botlin); + + /* If this is the line with the prompt, we might need to + compensate for invisible characters in the new line. Do + this only if there is not more than one new line (which + implies that we completely overwrite the old visible line) + and the new line is shorter than the old. Make sure we are + at the end of the new line before clearing. */ + if (linenum == 0 && + inv_botlin == 0 && _rl_last_c_pos == out && + (wrap_offset > visible_wrap_offset) && + (_rl_last_c_pos < visible_first_line_len)) + { + nleft = screenwidth + wrap_offset - _rl_last_c_pos; + if (nleft) + _rl_clear_to_eol (nleft); + } + + /* Since the new first line is now visible, save its length. */ + if (linenum == 0) + visible_first_line_len = (inv_botlin > 0) ? inv_lbreaks[1] : out - wrap_offset; + } + + /* We may have deleted some lines. If so, clear the left over + blank ones at the bottom out. */ + if (_rl_vis_botlin > inv_botlin) + { + char *tt; + for (; linenum <= _rl_vis_botlin; linenum++) + { + tt = VIS_CHARS (linenum); + _rl_move_vert (linenum); + _rl_move_cursor_relative (0, tt); + _rl_clear_to_eol + ((linenum == _rl_vis_botlin) ? strlen (tt) : screenwidth); + } + } + _rl_vis_botlin = inv_botlin; + + /* CHANGED_SCREEN_LINE is set to 1 if we have moved to a + different screen line during this redisplay. */ + changed_screen_line = _rl_last_v_pos != cursor_linenum; + if (changed_screen_line) + { + _rl_move_vert (cursor_linenum); + /* If we moved up to the line with the prompt using term_up, + the physical cursor position on the screen stays the same, + but the buffer position needs to be adjusted to account + for invisible characters. */ + if (cursor_linenum == 0 && wrap_offset) + _rl_last_c_pos += wrap_offset; + } + + /* We have to reprint the prompt if it contains invisible + characters, since it's not generally OK to just reprint + the characters from the current cursor position. But we + only need to reprint it if the cursor is before the last + invisible character in the prompt string. */ + nleft = visible_length + wrap_offset; + if (cursor_linenum == 0 && wrap_offset > 0 && _rl_last_c_pos > 0 && + _rl_last_c_pos <= last_invisible && local_prompt) + { + if (term_cr) + tputs (term_cr, 1, _rl_output_character_function); + _rl_output_some_chars (local_prompt, nleft); + _rl_last_c_pos = nleft; + } + + /* Where on that line? And where does that line start + in the buffer? */ + pos = inv_lbreaks[cursor_linenum]; + /* nleft == number of characters in the line buffer between the + start of the line and the cursor position. */ + nleft = c_pos - pos; + + /* Since _rl_backspace() doesn't know about invisible characters in the + prompt, and there's no good way to tell it, we compensate for + those characters here and call _rl_backspace() directly. */ + if (wrap_offset && cursor_linenum == 0 && nleft < _rl_last_c_pos) + { + _rl_backspace (_rl_last_c_pos - nleft); + _rl_last_c_pos = nleft; + } + + if (nleft != _rl_last_c_pos) + _rl_move_cursor_relative (nleft, &invisible_line[pos]); + } + } + else /* Do horizontal scrolling. */ + { +#define M_OFFSET(margin, offset) ((margin) == 0 ? offset : 0) + int lmargin, ndisp, nleft, phys_c_pos, t; + + /* Always at top line. */ + _rl_last_v_pos = 0; + + /* Compute where in the buffer the displayed line should start. This + will be LMARGIN. */ + + /* The number of characters that will be displayed before the cursor. */ + ndisp = c_pos - wrap_offset; + nleft = visible_length + wrap_offset; + /* Where the new cursor position will be on the screen. This can be + longer than SCREENWIDTH; if it is, lmargin will be adjusted. */ + phys_c_pos = c_pos - (last_lmargin ? last_lmargin : wrap_offset); + t = screenwidth / 3; + + /* If the number of characters had already exceeded the screenwidth, + last_lmargin will be > 0. */ + + /* If the number of characters to be displayed is more than the screen + width, compute the starting offset so that the cursor is about + two-thirds of the way across the screen. */ + if (phys_c_pos > screenwidth - 2) + { + lmargin = c_pos - (2 * t); + if (lmargin < 0) + lmargin = 0; + /* If the left margin would be in the middle of a prompt with + invisible characters, don't display the prompt at all. */ + if (wrap_offset && lmargin > 0 && lmargin < nleft) + lmargin = nleft; + } + else if (ndisp < screenwidth - 2) /* XXX - was -1 */ + lmargin = 0; + else if (phys_c_pos < 1) + { + /* If we are moving back towards the beginning of the line and + the last margin is no longer correct, compute a new one. */ + lmargin = ((c_pos - 1) / t) * t; /* XXX */ + if (wrap_offset && lmargin > 0 && lmargin < nleft) + lmargin = nleft; + } + else + lmargin = last_lmargin; + + /* If the first character on the screen isn't the first character + in the display line, indicate this with a special character. */ + if (lmargin > 0) + line[lmargin] = '<'; + + /* If SCREENWIDTH characters starting at LMARGIN do not encompass + the whole line, indicate that with a special characters at the + right edge of the screen. If LMARGIN is 0, we need to take the + wrap offset into account. */ + t = lmargin + M_OFFSET (lmargin, wrap_offset) + screenwidth; + if (t < out) + line[t - 1] = '>'; + + if (!rl_display_fixed || forced_display || lmargin != last_lmargin) + { + forced_display = 0; + update_line (&visible_line[last_lmargin], + &invisible_line[lmargin], + 0, + screenwidth + visible_wrap_offset, + screenwidth + (lmargin ? 0 : wrap_offset), + 0); + + /* If the visible new line is shorter than the old, but the number + of invisible characters is greater, and we are at the end of + the new line, we need to clear to eol. */ + t = _rl_last_c_pos - M_OFFSET (lmargin, wrap_offset); + if ((M_OFFSET (lmargin, wrap_offset) > visible_wrap_offset) && + (_rl_last_c_pos == out) && + t < visible_first_line_len) + { + nleft = screenwidth - t; + _rl_clear_to_eol (nleft); + } + visible_first_line_len = out - lmargin - M_OFFSET (lmargin, wrap_offset); + if (visible_first_line_len > screenwidth) + visible_first_line_len = screenwidth; + + _rl_move_cursor_relative (c_pos - lmargin, &invisible_line[lmargin]); + last_lmargin = lmargin; + } + } + fflush (rl_outstream); + + /* Swap visible and non-visible lines. */ + { + char *temp = visible_line; + int *itemp = vis_lbreaks; + visible_line = invisible_line; + invisible_line = temp; + vis_lbreaks = inv_lbreaks; + inv_lbreaks = itemp; + rl_display_fixed = 0; + /* If we are displaying on a single line, and last_lmargin is > 0, we + are not displaying any invisible characters, so set visible_wrap_offset + to 0. */ + if (_rl_horizontal_scroll_mode && last_lmargin) + visible_wrap_offset = 0; + else + visible_wrap_offset = wrap_offset; + } +} + +/* PWP: update_line() is based on finding the middle difference of each + line on the screen; vis: + + /old first difference + /beginning of line | /old last same /old EOL + v v v v +old: eddie> Oh, my little gruntle-buggy is to me, as lurgid as +new: eddie> Oh, my little buggy says to me, as lurgid as + ^ ^ ^ ^ + \beginning of line | \new last same \new end of line + \new first difference + + All are character pointers for the sake of speed. Special cases for + no differences, as well as for end of line additions must be handeled. + + Could be made even smarter, but this works well enough */ +static void +update_line (old, new, current_line, omax, nmax, inv_botlin) + register char *old, *new; + int current_line, omax, nmax, inv_botlin; +{ + register char *ofd, *ols, *oe, *nfd, *nls, *ne; + int temp, lendiff, wsatend, od, nd; + int current_invis_chars; + + /* If we're at the right edge of a terminal that supports xn, we're + ready to wrap around, so do so. This fixes problems with knowing + the exact cursor position and cut-and-paste with certain terminal + emulators. In this calculation, TEMP is the physical screen + position of the cursor. */ + temp = _rl_last_c_pos - W_OFFSET(_rl_last_v_pos, visible_wrap_offset); + if (temp == screenwidth && _rl_term_autowrap && !_rl_horizontal_scroll_mode + && _rl_last_v_pos == current_line - 1) + { + if (new[0]) + putc (new[0], rl_outstream); + else + putc (' ', rl_outstream); + _rl_last_c_pos = 1; /* XXX */ + _rl_last_v_pos++; + if (old[0] && new[0]) + old[0] = new[0]; + } + + /* Find first difference. */ + for (ofd = old, nfd = new; + (ofd - old < omax) && *ofd && (*ofd == *nfd); + ofd++, nfd++) + ; + + /* Move to the end of the screen line. ND and OD are used to keep track + of the distance between ne and new and oe and old, respectively, to + move a subtraction out of each loop. */ + for (od = ofd - old, oe = ofd; od < omax && *oe; oe++, od++); + for (nd = nfd - new, ne = nfd; nd < nmax && *ne; ne++, nd++); + + /* If no difference, continue to next line. */ + if (ofd == oe && nfd == ne) + return; + + wsatend = 1; /* flag for trailing whitespace */ + ols = oe - 1; /* find last same */ + nls = ne - 1; + while ((ols > ofd) && (nls > nfd) && (*ols == *nls)) + { + if (*ols != ' ') + wsatend = 0; + ols--; + nls--; + } + + if (wsatend) + { + ols = oe; + nls = ne; + } + else if (*ols != *nls) + { + if (*ols) /* don't step past the NUL */ + ols++; + if (*nls) + nls++; + } + + /* count of invisible characters in the current invisible line. */ + current_invis_chars = W_OFFSET (current_line, wrap_offset); + if (_rl_last_v_pos != current_line) + { + _rl_move_vert (current_line); + if (current_line == 0 && visible_wrap_offset) + _rl_last_c_pos += visible_wrap_offset; + } + + /* If this is the first line and there are invisible characters in the + prompt string, and the prompt string has not changed, and the current + cursor position is before the last invisible character in the prompt, + and the index of the character to move to is past the end of the prompt + string, then redraw the entire prompt string. We can only do this + reliably if the terminal supports a `cr' capability. + + This is not an efficiency hack -- there is a problem with redrawing + portions of the prompt string if they contain terminal escape + sequences (like drawing the `unbold' sequence without a corresponding + `bold') that manifests itself on certain terminals. */ + + lendiff = local_prompt ? strlen (local_prompt) : 0; + od = ofd - old; /* index of first difference in visible line */ + if (current_line == 0 && !_rl_horizontal_scroll_mode && + term_cr && lendiff > visible_length && _rl_last_c_pos > 0 && + od > lendiff && _rl_last_c_pos < last_invisible) + { + tputs (term_cr, 1, _rl_output_character_function); + _rl_output_some_chars (local_prompt, lendiff); + _rl_last_c_pos = lendiff; + } + + _rl_move_cursor_relative (od, old); + + /* if (len (new) > len (old)) */ + lendiff = (nls - nfd) - (ols - ofd); + + /* If we are changing the number of invisible characters in a line, and + the spot of first difference is before the end of the invisible chars, + lendiff needs to be adjusted. */ + if (current_line == 0 && !_rl_horizontal_scroll_mode && + current_invis_chars != visible_wrap_offset) + { + temp = visible_wrap_offset - current_invis_chars; + lendiff += temp; + } + + /* Insert (diff (len (old), len (new)) ch. */ + temp = ne - nfd; + if (lendiff > 0) + { + /* Non-zero if we're increasing the number of lines. */ + int gl = current_line >= _rl_vis_botlin && inv_botlin > _rl_vis_botlin; + /* Sometimes it is cheaper to print the characters rather than + use the terminal's capabilities. If we're growing the number + of lines, make sure we actually cause the new line to wrap + around on auto-wrapping terminals. */ + if (terminal_can_insert && ((2 * temp) >= lendiff || term_IC) && (!_rl_term_autowrap || !gl)) + { + /* If lendiff > visible_length and _rl_last_c_pos == 0 and + _rl_horizontal_scroll_mode == 1, inserting the characters with + term_IC or term_ic will screw up the screen because of the + invisible characters. We need to just draw them. */ + if (*ols && (!_rl_horizontal_scroll_mode || _rl_last_c_pos > 0 || + lendiff <= visible_length || !current_invis_chars)) + { + insert_some_chars (nfd, lendiff); + _rl_last_c_pos += lendiff; + } + else if (*ols == 0) + { + /* At the end of a line the characters do not have to + be "inserted". They can just be placed on the screen. */ + /* However, this screws up the rest of this block, which + assumes you've done the insert because you can. */ + _rl_output_some_chars (nfd, lendiff); + _rl_last_c_pos += lendiff; + } + else + { + /* We have horizontal scrolling and we are not inserting at + the end. We have invisible characters in this line. This + is a dumb update. */ + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += temp; + return; + } + /* Copy (new) chars to screen from first diff to last match. */ + temp = nls - nfd; + if ((temp - lendiff) > 0) + { + _rl_output_some_chars (nfd + lendiff, temp - lendiff); + _rl_last_c_pos += temp - lendiff; + } + } + else + { + /* cannot insert chars, write to EOL */ + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += temp; + } + } + else /* Delete characters from line. */ + { + /* If possible and inexpensive to use terminal deletion, then do so. */ + if (term_dc && (2 * temp) >= -lendiff) + { + /* If all we're doing is erasing the invisible characters in the + prompt string, don't bother. It screws up the assumptions + about what's on the screen. */ + if (_rl_horizontal_scroll_mode && _rl_last_c_pos == 0 && + -lendiff == visible_wrap_offset) + lendiff = 0; + + if (lendiff) + delete_chars (-lendiff); /* delete (diff) characters */ + + /* Copy (new) chars to screen from first diff to last match */ + temp = nls - nfd; + if (temp > 0) + { + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += temp; + } + } + /* Otherwise, print over the existing material. */ + else + { + if (temp > 0) + { + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += temp; + } + lendiff = (oe - old) - (ne - new); + if (_rl_term_autowrap && current_line < inv_botlin) + space_to_eol (lendiff); + else + _rl_clear_to_eol (lendiff); + } + } +} + +/* Tell the update routines that we have moved onto a new (empty) line. */ +int +rl_on_new_line () +{ + if (visible_line) + visible_line[0] = '\0'; + + _rl_last_c_pos = _rl_last_v_pos = 0; + _rl_vis_botlin = last_lmargin = 0; + if (vis_lbreaks) + vis_lbreaks[0] = vis_lbreaks[1] = 0; + visible_wrap_offset = 0; + return 0; +} + +/* Actually update the display, period. */ +int +rl_forced_update_display () +{ + if (visible_line) + { + register char *temp = visible_line; + + while (*temp) + *temp++ = '\0'; + } + rl_on_new_line (); + forced_display++; + (*rl_redisplay_function) (); + return 0; +} + +/* Move the cursor from _rl_last_c_pos to NEW, which are buffer indices. + DATA is the contents of the screen line of interest; i.e., where + the movement is being done. */ +void +_rl_move_cursor_relative (new, data) + int new; + char *data; +{ + register int i; + + /* If we don't have to do anything, then return. */ + if (_rl_last_c_pos == new) return; + + /* It may be faster to output a CR, and then move forwards instead + of moving backwards. */ + /* i == current physical cursor position. */ + i = _rl_last_c_pos - W_OFFSET(_rl_last_v_pos, visible_wrap_offset); + if (new == 0 || CR_FASTER (new, _rl_last_c_pos) || + (_rl_term_autowrap && i == screenwidth)) + { +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (term_cr, 1, _rl_output_character_function); +#endif /* !__MSDOS__ */ + _rl_last_c_pos = 0; + } + + if (_rl_last_c_pos < new) + { + /* Move the cursor forward. We do it by printing the command + to move the cursor forward if there is one, else print that + portion of the output buffer again. Which is cheaper? */ + + /* The above comment is left here for posterity. It is faster + to print one character (non-control) than to print a control + sequence telling the terminal to move forward one character. + That kind of control is for people who don't know what the + data is underneath the cursor. */ +#if defined (HACK_TERMCAP_MOTION) + extern char *term_forward_char; + + if (term_forward_char) + for (i = _rl_last_c_pos; i < new; i++) + tputs (term_forward_char, 1, _rl_output_character_function); + else + for (i = _rl_last_c_pos; i < new; i++) + putc (data[i], rl_outstream); +#else + for (i = _rl_last_c_pos; i < new; i++) + putc (data[i], rl_outstream); +#endif /* HACK_TERMCAP_MOTION */ + } + else if (_rl_last_c_pos != new) + _rl_backspace (_rl_last_c_pos - new); + _rl_last_c_pos = new; +} + +/* PWP: move the cursor up or down. */ +void +_rl_move_vert (to) + int to; +{ + register int delta, i; + + if (_rl_last_v_pos == to || to > screenheight) + return; + +#if defined (__GO32__) + { + int row, col; + + ScreenGetCursor (&row, &col); + ScreenSetCursor ((row + to - _rl_last_v_pos), col); + } +#else /* !__GO32__ */ + + if ((delta = to - _rl_last_v_pos) > 0) + { + for (i = 0; i < delta; i++) + putc ('\n', rl_outstream); + tputs (term_cr, 1, _rl_output_character_function); + _rl_last_c_pos = 0; + } + else + { /* delta < 0 */ + if (term_up && *term_up) + for (i = 0; i < -delta; i++) + tputs (term_up, 1, _rl_output_character_function); + } +#endif /* !__GO32__ */ + _rl_last_v_pos = to; /* Now TO is here */ +} + +/* Physically print C on rl_outstream. This is for functions which know + how to optimize the display. Return the number of characters output. */ +int +rl_show_char (c) + int c; +{ + int n = 1; + if (META_CHAR (c) && (_rl_output_meta_chars == 0)) + { + fprintf (rl_outstream, "M-"); + n += 2; + c = UNMETA (c); + } + +#if defined (DISPLAY_TABS) + if ((CTRL_CHAR (c) && c != '\t') || c == RUBOUT) +#else + if (CTRL_CHAR (c) || c == RUBOUT) +#endif /* !DISPLAY_TABS */ + { + fprintf (rl_outstream, "C-"); + n += 2; + c = CTRL_CHAR (c) ? UNCTRL (c) : '?'; + } + + putc (c, rl_outstream); + fflush (rl_outstream); + return n; +} + +int +rl_character_len (c, pos) + register int c, pos; +{ + unsigned char uc; + + uc = (unsigned char)c; + + if (META_CHAR (uc)) + return ((_rl_output_meta_chars == 0) ? 4 : 1); + + if (uc == '\t') + { +#if defined (DISPLAY_TABS) + return (((pos | 7) + 1) - pos); +#else + return (2); +#endif /* !DISPLAY_TABS */ + } + + if (CTRL_CHAR (c) || c == RUBOUT) + return (2); + + return ((isprint (uc)) ? 1 : 2); +} + +/* How to print things in the "echo-area". The prompt is treated as a + mini-modeline. */ + +#if defined (USE_VARARGS) +int +#if defined (PREFER_STDARG) +rl_message (const char *format, ...) +#else +rl_message (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + vsprintf (msg_buf, format, args); + va_end (args); + + rl_display_prompt = msg_buf; + (*rl_redisplay_function) (); + return 0; +} +#else /* !USE_VARARGS */ +int +rl_message (format, arg1, arg2) + char *format; +{ + sprintf (msg_buf, format, arg1, arg2); + rl_display_prompt = msg_buf; + (*rl_redisplay_function) (); + return 0; +} +#endif /* !USE_VARARGS */ + +/* How to clear things from the "echo-area". */ +int +rl_clear_message () +{ + rl_display_prompt = rl_prompt; + (*rl_redisplay_function) (); + return 0; +} + +int +rl_reset_line_state () +{ + rl_on_new_line (); + + rl_display_prompt = rl_prompt ? rl_prompt : ""; + forced_display = 1; + return 0; +} + +static char *saved_local_prompt; +static char *saved_local_prefix; +static int saved_last_invisible; +static int saved_visible_length; + +void +_rl_save_prompt () +{ + saved_local_prompt = local_prompt; + saved_local_prefix = local_prompt_prefix; + saved_last_invisible = last_invisible; + saved_visible_length = visible_length; + + local_prompt = local_prompt_prefix = (char *)0; + last_invisible = visible_length = 0; +} + +void +_rl_restore_prompt () +{ + if (local_prompt) + free (local_prompt); + if (local_prompt_prefix) + free (local_prompt_prefix); + + local_prompt = saved_local_prompt; + local_prompt_prefix = saved_local_prefix; + last_invisible = saved_last_invisible; + visible_length = saved_visible_length; +} + +char * +_rl_make_prompt_for_search (pchar) + int pchar; +{ + int len; + char *pmt; + + _rl_save_prompt (); + + if (saved_local_prompt == 0) + { + len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0; + pmt = xmalloc (len + 2); + if (len) + strcpy (pmt, rl_prompt); + pmt[len] = pchar; + pmt[len+1] = '\0'; + } + else + { + len = *saved_local_prompt ? strlen (saved_local_prompt) : 0; + pmt = xmalloc (len + 2); + if (len) + strcpy (pmt, saved_local_prompt); + pmt[len] = pchar; + pmt[len+1] = '\0'; + local_prompt = savestring (pmt); + last_invisible = saved_last_invisible; + visible_length = saved_visible_length + 1; + } + return pmt; +} + +/* Quick redisplay hack when erasing characters at the end of the line. */ +void +_rl_erase_at_end_of_line (l) + int l; +{ + register int i; + + _rl_backspace (l); + for (i = 0; i < l; i++) + putc (' ', rl_outstream); + _rl_backspace (l); + for (i = 0; i < l; i++) + visible_line[--_rl_last_c_pos] = '\0'; + rl_display_fixed++; +} + +/* Clear to the end of the line. COUNT is the minimum + number of character spaces to clear, */ +void +_rl_clear_to_eol (count) + int count; +{ +#if !defined (__GO32__) + if (term_clreol) + tputs (term_clreol, 1, _rl_output_character_function); + else if (count) +#endif /* !__GO32__ */ + space_to_eol (count); +} + +/* Clear to the end of the line using spaces. COUNT is the minimum + number of character spaces to clear, */ +static void +space_to_eol (count) + int count; +{ + register int i; + + for (i = 0; i < count; i++) + putc (' ', rl_outstream); + + _rl_last_c_pos += count; +} + +void +_rl_clear_screen () +{ +#if !defined (__GO32__) + if (term_clrpag) + tputs (term_clrpag, 1, _rl_output_character_function); + else +#endif /* !__GO32__ */ + crlf (); +} + +/* Insert COUNT characters from STRING to the output stream. */ +static void +insert_some_chars (string, count) + char *string; + int count; +{ +#if defined (__GO32__) + int row, col, width; + char *row_start; + + ScreenGetCursor (&row, &col); + width = ScreenCols (); + row_start = ScreenPrimary + (row * width); + + memcpy (row_start + col + count, row_start + col, width - col - count); + + /* Place the text on the screen. */ + _rl_output_some_chars (string, count); +#else /* !_GO32 */ + + /* If IC is defined, then we do not have to "enter" insert mode. */ + if (term_IC) + { + char *buffer; + buffer = tgoto (term_IC, 0, count); + tputs (buffer, 1, _rl_output_character_function); + _rl_output_some_chars (string, count); + } + else + { + register int i; + + /* If we have to turn on insert-mode, then do so. */ + if (term_im && *term_im) + tputs (term_im, 1, _rl_output_character_function); + + /* If there is a special command for inserting characters, then + use that first to open up the space. */ + if (term_ic && *term_ic) + { + for (i = count; i--; ) + tputs (term_ic, 1, _rl_output_character_function); + } + + /* Print the text. */ + _rl_output_some_chars (string, count); + + /* If there is a string to turn off insert mode, we had best use + it now. */ + if (term_ei && *term_ei) + tputs (term_ei, 1, _rl_output_character_function); + } +#endif /* !__GO32__ */ +} + +/* Delete COUNT characters from the display line. */ +static void +delete_chars (count) + int count; +{ +#if defined (__GO32__) + int row, col, width; + char *row_start; + + ScreenGetCursor (&row, &col); + width = ScreenCols (); + row_start = ScreenPrimary + (row * width); + + memcpy (row_start + col, row_start + col + count, width - col - count); + memset (row_start + width - count, 0, count * 2); +#else /* !_GO32 */ + + if (count > screenwidth) /* XXX */ + return; + + if (term_DC && *term_DC) + { + char *buffer; + buffer = tgoto (term_DC, count, count); + tputs (buffer, count, _rl_output_character_function); + } + else + { + if (term_dc && *term_dc) + while (count--) + tputs (term_dc, 1, _rl_output_character_function); + } +#endif /* !__GO32__ */ +} + +void +_rl_update_final () +{ + int full_lines; + + full_lines = 0; + /* If the cursor is the only thing on an otherwise-blank last line, + compensate so we don't print an extra CRLF. */ + if (_rl_vis_botlin && _rl_last_c_pos == 0 && + visible_line[vis_lbreaks[_rl_vis_botlin]] == 0) + { + _rl_vis_botlin--; + full_lines = 1; + } + _rl_move_vert (_rl_vis_botlin); + /* If we've wrapped lines, remove the final xterm line-wrap flag. */ + if (full_lines && _rl_term_autowrap && (VIS_LLEN(_rl_vis_botlin) == screenwidth)) + { + char *last_line; + last_line = &visible_line[inv_lbreaks[_rl_vis_botlin]]; + _rl_move_cursor_relative (screenwidth - 1, last_line); + _rl_clear_to_eol (0); + putc (last_line[screenwidth - 1], rl_outstream); + } + _rl_vis_botlin = 0; + crlf (); + fflush (rl_outstream); + rl_display_fixed++; +} + +/* Move to the start of the current line. */ +static void +cr () +{ + if (term_cr) + { + tputs (term_cr, 1, _rl_output_character_function); + _rl_last_c_pos = 0; + } +} + +/* Redisplay the current line after a SIGWINCH is received. */ +void +_rl_redisplay_after_sigwinch () +{ + char *t, *oldp, *oldl, *oldlprefix; + + /* Clear the current line and put the cursor at column 0. Make sure + the right thing happens if we have wrapped to a new screen line. */ + if (term_cr) + { + tputs (term_cr, 1, _rl_output_character_function); + _rl_last_c_pos = 0; + if (term_clreol) + tputs (term_clreol, 1, _rl_output_character_function); + else + { + space_to_eol (screenwidth); + tputs (term_cr, 1, _rl_output_character_function); + } + if (_rl_last_v_pos > 0) + _rl_move_vert (0); + } + else + crlf (); + + /* Redraw only the last line of a multi-line prompt. */ + t = strrchr (rl_display_prompt, '\n'); + if (t) + { + oldp = rl_display_prompt; + oldl = local_prompt; + oldlprefix = local_prompt_prefix; + rl_display_prompt = ++t; + local_prompt = local_prompt_prefix = (char *)NULL; + rl_forced_update_display (); + rl_display_prompt = oldp; + local_prompt = oldl; + local_prompt_prefix = oldlprefix; + } + else + rl_forced_update_display (); +} + +void +_rl_clean_up_for_exit () +{ + if (readline_echoing_p) + { + _rl_move_vert (_rl_vis_botlin); + _rl_vis_botlin = 0; + fflush (rl_outstream); + rl_restart_output (); + } +} diff --git a/readline/doc/ChangeLog b/readline/doc/ChangeLog new file mode 100644 index 00000000000..8049c5e6c19 --- /dev/null +++ b/readline/doc/ChangeLog @@ -0,0 +1,29 @@ +Tue Dec 22 10:07:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com> + + * hsuser.texinfo (Bash History Builtins): comment out btindex + commands. + + * Import of Readline 2.2.1. + + New files: readline.0, readline.3, texi2dvi, texi2html. + +1998-12-17 Felix Lee <flee@cygnus.com> + + * inc-hist.texi: @node line "Using History" was wrong. + +Thu Jul 9 17:03:26 1998 Edith Epstein <eepstein@sophia.cygnus.com> + + * inc-hist.texi: one line change. + +Wed Sep 20 12:57:29 1995 Ian Lance Taylor <ian@cygnus.com> + + * Makefile.in (maintainer-clean): New synonym for realclean. + +Tue Feb 2 11:40:04 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) + + * Makefile.in: configurable (and useable) Makefile template + * Makefile: removed, replaced with configurable Makefile.in + * texindex.c texinfo.tex: remove, replacing w/refs to tools + elsewhere in distribution tree + * configure.in: pro forma configure stub + * ChangeLog: new file diff --git a/readline/doc/Makefile.in b/readline/doc/Makefile.in new file mode 100644 index 00000000000..2eabb410833 --- /dev/null +++ b/readline/doc/Makefile.in @@ -0,0 +1,135 @@ +# This makefile for Readline library documentation is in -*- text -*- mode. +# Emacs likes it that way. +top_srcdir = @top_srcdir@ +srcdir = @srcdir@ +VPATH = .:@srcdir@ + +prefix = @prefix@ +infodir = @infodir@ + +mandir = @mandir@ +man3dir = $(mandir)/man3 + +RM = rm -f + +TEXINPUTDIR = $(srcdir) + +MAKEINFO = makeinfo +TEXI2DVI = $(srcdir)/texi2dvi +TEXI2HTML = $(srcdir)/texi2html +QUIETPS = #set this to -q to shut up dvips +DVIPS = dvips -D 300 $(QUIETPS) -o $@ # tricky + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +RLSRC = $(srcdir)/rlman.texinfo $(srcdir)/rluser.texinfo \ + $(srcdir)/rltech.texinfo +HISTSRC = $(srcdir)/hist.texinfo $(srcdir)/hsuser.texinfo \ + $(srcdir)/hstech.texinfo + +# This should be a program that converts troff to an ascii-readable format +NROFF = groff -Tascii + +# This should be a program that converts troff to postscript +GROFF = groff + +DVIOBJ = readline.dvi history.dvi +INFOOBJ = readline.info history.info +PSOBJ = readline.ps history.ps +HTMLOBJ = readline.html history.html +HTMLTOC = readline_toc.html history_toc.html +TEXTOBJ = readline.0 + +CREATED_DOCS = $(DVIOBJ) $(INFOOBJ) $(PSOBJ) $(HTMLOBJ) $(HTMLTOC) $(TEXTOBJ) + +.SUFFIXES: .0 .3 .ps .txt .dvi + +.3.0: + $(RM) $@ + -${NROFF} -man $< > $@ + +all: info dvi html ps text +nodvi: info html text + +readline.dvi: $(RLSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rlman.texinfo + mv rlman.dvi readline.dvi + +readline.info: $(RLSRC) + $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rlman.texinfo + +history.dvi: ${HISTSRC} + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/hist.texinfo + mv hist.dvi history.dvi + +history.info: ${HISTSRC} + $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/hist.texinfo + +readline.ps: readline.dvi + $(RM) $@ + $(DVIPS) readline.dvi + +history.ps: history.dvi + $(RM) $@ + $(DVIPS) history.dvi + +readline.html: ${RLSRC} + $(TEXI2HTML) -I $(TEXINPUTDIR) $(srcdir)/rlman.texinfo + sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman.html > readline.html + sed -e 's:rlman.html:readline.html:' -e 's:rlman_toc.html:readline_toc.html:' rlman_toc.html > readline_toc.html + $(RM) rlman.html rlman_toc.html + +history.html: ${HISTSRC} + $(TEXI2HTML) -I $(TEXINPUTDIR) $(srcdir)/hist.texinfo + sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist.html > history.html + sed -e 's:hist.html:history.html:' -e 's:hist_toc.html:history_toc.html:' hist_toc.html > history_toc.html + $(RM) hist.html hist_toc.html + +info: $(INFOOBJ) +dvi: $(DVIOBJ) +ps: $(PSOBJ) +html: $(HTMLOBJ) +text: $(TEXTOBJ) + +readline.0: readline.3 + +clean: + $(RM) *.aux *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps *.pgs \ + *.fns *.kys *.tps *.vrs *.o core + +distclean: clean + $(RM) $(CREATED_DOCS) + $(RM) Makefile + +mostlyclean: clean + +maintainer-clean: clean + $(RM) $(CREATED_DOCS) + $(RM) Makefile + +installdirs: $(top_srcdir)/support/mkdirs + -$(SHELL) $(top_srcdir)/support/mkdirs $(infodir) $(man3dir) + +install: installdirs info + if test -f readline.info; then \ + ${INSTALL_DATA} readline.info $(infodir)/readline.info; \ + else \ + ${INSTALL_DATA} $(srcdir)/readline.info $(infodir)/readline.info; \ + fi + if test -f history.info; then \ + ${INSTALL_DATA} history.info $(infodir)/history.info; \ + else \ + ${INSTALL_DATA} $(srcdir)/history.info $(infodir)/history.info; \ + fi + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --dir-file=$(infodir)/dir $(infodir)/readline.info ; \ + install-info --dir-file=$(infodir)/dir $(infodir)/history.info ; \ + else true; fi + -${INSTALL_DATA} $(srcdir)/readline.3 $(man3dir)/readline.3 + +uninstall: + $(RM) $(infodir)/readline.info + $(RM) $(infodir)/history.info + $(RM) $(man3dir)/readline.3 diff --git a/readline/doc/hist.texinfo b/readline/doc/hist.texinfo new file mode 100644 index 00000000000..be8742f5e66 --- /dev/null +++ b/readline/doc/hist.texinfo @@ -0,0 +1,117 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header (This is for running Texinfo on a region.) +@setfilename history.info +@settitle GNU History Library +@c %**end of header (This is for running Texinfo on a region.) + +@setchapternewpage odd + +@ignore +last change: Thu Apr 2 14:38:22 EST 1998 +@end ignore + +@set EDITION 2.2 +@set VERSION 2.2 +@set UPDATED 2 April 1998 +@set UPDATE-MONTH April 1998 + +@dircategory Libraries +@direntry +* History: (history). The GNU history library API +@end direntry + +@ifinfo +This document describes the GNU History library, a programming tool that +provides a consistent user interface for recalling lines of previously +typed input. + +Copyright (C) 1988, 1991, 1993, 1995, 1996, 1998 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +pare preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ifinfo + +@titlepage +@title GNU History Library +@subtitle Edition @value{EDITION}, for @code{History Library} Version @value{VERSION}. +@subtitle @value{UPDATE-MONTH} +@author Brian Fox, Free Software Foundation +@author Chet Ramey, Case Western Reserve University + +@page +This document describes the GNU History library, a programming tool that +provides a consistent user interface for recalling lines of previously +typed input. + +Published by the Free Software Foundation @* +675 Massachusetts Avenue, @* +Cambridge, MA 02139 USA + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. + +@vskip 0pt plus 1filll +Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc. +@end titlepage + +@ifinfo +@node Top +@top GNU History Library + +This document describes the GNU History library, a programming tool that +provides a consistent user interface for recalling lines of previously +typed input. + +@menu +* Using History Interactively:: GNU History User's Manual. +* Programming with GNU History:: GNU History Programmer's Manual. +* Concept Index:: Index of concepts described in this manual. +* Function and Variable Index:: Index of externally visible functions + and variables. +@end menu +@end ifinfo + +@syncodeindex fn vr + +@include hsuser.texinfo +@include hstech.texinfo + +@node Concept Index +@appendix Concept Index +@printindex cp + +@node Function and Variable Index +@appendix Function and Variable Index +@printindex vr + +@contents +@bye diff --git a/readline/doc/hstech.texinfo b/readline/doc/hstech.texinfo new file mode 100644 index 00000000000..54100908407 --- /dev/null +++ b/readline/doc/hstech.texinfo @@ -0,0 +1,515 @@ +@ignore +This file documents the user interface to the GNU History library. + +Copyright (C) 1988, 1991, 1994, 1996 Free Software Foundation, Inc. +Authored by Brian Fox and Chet Ramey. + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@node Programming with GNU History +@chapter Programming with GNU History + +This chapter describes how to interface programs that you write +with the GNU History Library. +It should be considered a technical guide. +For information on the interactive use of GNU History, @pxref{Using +History Interactively}. + +@menu +* Introduction to History:: What is the GNU History library for? +* History Storage:: How information is stored. +* History Functions:: Functions that you can use. +* History Variables:: Variables that control behaviour. +* History Programming Example:: Example of using the GNU History Library. +@end menu + +@node Introduction to History +@section Introduction to History + +Many programs read input from the user a line at a time. The GNU History +library is able to keep track of those lines, associate arbitrary data with +each line, and utilize information from previous lines in composing new +ones. + +The programmer using the History library has available functions +for remembering lines on a history list, associating arbitrary data +with a line, removing lines from the list, searching through the list +for a line containing an arbitrary text string, and referencing any line +in the list directly. In addition, a history @dfn{expansion} function +is available which provides for a consistent user interface across +different programs. + +The user using programs written with the History library has the +benefit of a consistent user interface with a set of well-known +commands for manipulating the text of previous lines and using that text +in new commands. The basic history manipulation commands are similar to +the history substitution provided by @code{csh}. + +If the programmer desires, he can use the Readline library, which +includes some history manipulation by default, and has the added +advantage of command line editing. + +@node History Storage +@section History Storage + +The history list is an array of history entries. A history entry is +declared as follows: + +@example +typedef struct _hist_entry @{ + char *line; + char *data; +@} HIST_ENTRY; +@end example + +The history list itself might therefore be declared as + +@example +HIST_ENTRY **the_history_list; +@end example + +The state of the History library is encapsulated into a single structure: + +@example +/* A structure used to pass the current state of the history stuff around. */ +typedef struct _hist_state @{ + HIST_ENTRY **entries; /* Pointer to the entries themselves. */ + int offset; /* The location pointer within this array. */ + int length; /* Number of elements within this array. */ + int size; /* Number of slots allocated to this array. */ + int flags; +@} HISTORY_STATE; +@end example + +If the flags member includes @code{HS_STIFLED}, the history has been +stifled. + +@node History Functions +@section History Functions + +This section describes the calling sequence for the various functions +present in GNU History. + +@menu +* Initializing History and State Management:: Functions to call when you + want to use history in a + program. +* History List Management:: Functions used to manage the list + of history entries. +* Information About the History List:: Functions returning information about + the history list. +* Moving Around the History List:: Functions used to change the position + in the history list. +* Searching the History List:: Functions to search the history list + for entries containing a string. +* Managing the History File:: Functions that read and write a file + containing the history list. +* History Expansion:: Functions to perform csh-like history + expansion. +@end menu + +@node Initializing History and State Management +@subsection Initializing History and State Management + +This section describes functions used to initialize and manage +the state of the History library when you want to use the history +functions in your program. + +@deftypefun void using_history () +Begin a session in which the history functions might be used. This +initializes the interactive variables. +@end deftypefun + +@deftypefun {HISTORY_STATE *} history_get_history_state () +Return a structure describing the current state of the input history. +@end deftypefun + +@deftypefun void history_set_history_state (HISTORY_STATE *state) +Set the state of the history list according to @var{state}. +@end deftypefun + +@node History List Management +@subsection History List Management + +These functions manage individual entries on the history list, or set +parameters managing the list itself. + +@deftypefun void add_history (char *string) +Place @var{string} at the end of the history list. The associated data +field (if any) is set to @code{NULL}. +@end deftypefun + +@deftypefun {HIST_ENTRY *} remove_history (int which) +Remove history entry at offset @var{which} from the history. The +removed element is returned so you can free the line, data, +and containing structure. +@end deftypefun + +@deftypefun {HIST_ENTRY *} replace_history_entry (int which, char *line, char *data) +Make the history entry at offset @var{which} have @var{line} and @var{data}. +This returns the old entry so you can dispose of the data. In the case +of an invalid @var{which}, a @code{NULL} pointer is returned. +@end deftypefun + +@deftypefun void clear_history () +Clear the history list by deleting all the entries. +@end deftypefun + +@deftypefun void stifle_history (int max) +Stifle the history list, remembering only the last @var{max} entries. +@end deftypefun + +@deftypefun int unstifle_history () +Stop stifling the history. This returns the previous amount the +history was stifled. The value is positive if the history was +stifled, negative if it wasn't. +@end deftypefun + +@deftypefun int history_is_stifled () +Returns non-zero if the history is stifled, zero if it is not. +@end deftypefun + +@node Information About the History List +@subsection Information About the History List + +These functions return information about the entire history list or +individual list entries. + +@deftypefun {HIST_ENTRY **} history_list () +Return a @code{NULL} terminated array of @code{HIST_ENTRY} which is the +current input history. Element 0 of this list is the beginning of time. +If there is no history, return @code{NULL}. +@end deftypefun + +@deftypefun int where_history () +Returns the offset of the current history element. +@end deftypefun + +@deftypefun {HIST_ENTRY *} current_history () +Return the history entry at the current position, as determined by +@code{where_history ()}. If there is no entry there, return a @code{NULL} +pointer. +@end deftypefun + +@deftypefun {HIST_ENTRY *} history_get (int offset) +Return the history entry at position @var{offset}, starting from +@code{history_base}. If there is no entry there, or if @var{offset} +is greater than the history length, return a @code{NULL} pointer. +@end deftypefun + +@deftypefun int history_total_bytes () +Return the number of bytes that the primary history entries are using. +This function returns the sum of the lengths of all the lines in the +history. +@end deftypefun + +@node Moving Around the History List +@subsection Moving Around the History List + +These functions allow the current index into the history list to be +set or changed. + +@deftypefun int history_set_pos (int pos) +Set the position in the history list to @var{pos}, an absolute index +into the list. +@end deftypefun + +@deftypefun {HIST_ENTRY *} previous_history () +Back up the current history offset to the previous history entry, and +return a pointer to that entry. If there is no previous entry, return +a @code{NULL} pointer. +@end deftypefun + +@deftypefun {HIST_ENTRY *} next_history () +Move the current history offset forward to the next history entry, and +return the a pointer to that entry. If there is no next entry, return +a @code{NULL} pointer. +@end deftypefun + +@node Searching the History List +@subsection Searching the History List +@cindex History Searching + +These functions allow searching of the history list for entries containing +a specific string. Searching may be performed both forward and backward +from the current history position. The search may be @dfn{anchored}, +meaning that the string must match at the beginning of the history entry. +@cindex anchored search + +@deftypefun int history_search (char *string, int direction) +Search the history for @var{string}, starting at the current history +offset. If @var{direction} < 0, then the search is through previous entries, +else through subsequent. If @var{string} is found, then +the current history index is set to that history entry, and the value +returned is the offset in the line of the entry where +@var{string} was found. Otherwise, nothing is changed, and a -1 is +returned. +@end deftypefun + +@deftypefun int history_search_prefix (char *string, int direction) +Search the history for @var{string}, starting at the current history +offset. The search is anchored: matching lines must begin with +@var{string}. If @var{direction} < 0, then the search is through previous +entries, else through subsequent. If @var{string} is found, then the +current history index is set to that entry, and the return value is 0. +Otherwise, nothing is changed, and a -1 is returned. +@end deftypefun + +@deftypefun int history_search_pos (char *string, int direction, int pos) +Search for @var{string} in the history list, starting at @var{pos}, an +absolute index into the list. If @var{direction} is negative, the search +proceeds backward from @var{pos}, otherwise forward. Returns the absolute +index of the history element where @var{string} was found, or -1 otherwise. +@end deftypefun + +@node Managing the History File +@subsection Managing the History File + +The History library can read the history from and write it to a file. +This section documents the functions for managing a history file. + +@deftypefun int read_history (char *filename) +Add the contents of @var{filename} to the history list, a line at a +time. If @var{filename} is @code{NULL}, then read from +@file{~/.history}. Returns 0 if successful, or errno if not. +@end deftypefun + +@deftypefun int read_history_range (char *filename, int from, int to) +Read a range of lines from @var{filename}, adding them to the history list. +Start reading at line @var{from} and end at @var{to}. If +@var{from} is zero, start at the beginning. If @var{to} is less than +@var{from}, then read until the end of the file. If @var{filename} is +@code{NULL}, then read from @file{~/.history}. Returns 0 if successful, +or @code{errno} if not. +@end deftypefun + +@deftypefun int write_history (char *filename) +Write the current history to @var{filename}, overwriting @var{filename} +if necessary. If @var{filename} is +@code{NULL}, then write the history list to @file{~/.history}. Values +returned are as in @code{read_history ()}. +@end deftypefun + +@deftypefun int append_history (int nelements, char *filename) +Append the last @var{nelements} of the history list to @var{filename}. +@end deftypefun + +@deftypefun int history_truncate_file (char *filename, int nlines) +Truncate the history file @var{filename}, leaving only the last +@var{nlines} lines. +@end deftypefun + +@node History Expansion +@subsection History Expansion + +These functions implement @code{csh}-like history expansion. + +@deftypefun int history_expand (char *string, char **output) +Expand @var{string}, placing the result into @var{output}, a pointer +to a string (@pxref{History Interaction}). Returns: +@table @code +@item 0 +If no expansions took place (or, if the only change in +the text was the de-slashifying of the history expansion +character); +@item 1 +if expansions did take place; +@item -1 +if there was an error in expansion; +@item 2 +if the returned line should only be displayed, but not executed, +as with the @code{:p} modifier (@pxref{Modifiers}). +@end table + +If an error ocurred in expansion, then @var{output} contains a descriptive +error message. +@end deftypefun + +@deftypefun {char *} history_arg_extract (int first, int last, char *string) +Extract a string segment consisting of the @var{first} through @var{last} +arguments present in @var{string}. Arguments are broken up as in Bash. +@end deftypefun + +@deftypefun {char *} get_history_event (char *string, int *cindex, int qchar) +Returns the text of the history event beginning at @var{string} + +@var{*cindex}. @var{*cindex} is modified to point to after the event +specifier. At function entry, @var{cindex} points to the index into +@var{string} where the history event specification begins. @var{qchar} +is a character that is allowed to end the event specification in addition +to the ``normal'' terminating characters. +@end deftypefun + +@deftypefun {char **} history_tokenize (char *string) +Return an array of tokens parsed out of @var{string}, much as the +shell might. The tokens are split on white space and on the +characters @code{()<>;&|$}, and shell quoting conventions are +obeyed. +@end deftypefun + +@node History Variables +@section History Variables + +This section describes the externally visible variables exported by +the GNU History Library. + +@deftypevar int history_base +The logical offset of the first entry in the history list. +@end deftypevar + +@deftypevar int history_length +The number of entries currently stored in the history list. +@end deftypevar + +@deftypevar int max_input_history +The maximum number of history entries. This must be changed using +@code{stifle_history ()}. +@end deftypevar + +@deftypevar char history_expansion_char +The character that starts a history event. The default is @samp{!}. +@end deftypevar + +@deftypevar char history_subst_char +The character that invokes word substitution if found at the start of +a line. The default is @samp{^}. +@end deftypevar + +@deftypevar char history_comment_char +During tokenization, if this character is seen as the first character +of a word, then it and all subsequent characters up to a newline are +ignored, suppressing history expansion for the remainder of the line. +This is disabled by default. +@end deftypevar + +@deftypevar {char *} history_no_expand_chars +The list of characters which inhibit history expansion if found immediately +following @var{history_expansion_char}. The default is whitespace and +@samp{=}. +@end deftypevar + +@deftypevar {char *} history_search_delimiter_chars +The list of additional characters which can delimit a history search +string, in addition to whitespace, @samp{:} and @samp{?} in the case of +a substring search. The default is empty. +@end deftypevar + +@deftypevar int history_quotes_inhibit_expansion +If non-zero, single-quoted words are not scanned for the history expansion +character. The default value is 0. +@end deftypevar + +@deftypevar {Function *} history_inhibit_expansion_function +This should be set to the address of a function that takes two arguments: +a @code{char *} (@var{string}) and an integer index into that string (@var{i}). +It should return a non-zero value if the history expansion starting at +@var{string[i]} should not be performed; zero if the expansion should +be done. +It is intended for use by applications like Bash that use the history +expansion character for additional purposes. +By default, this variable is set to NULL. +@end deftypevar + +@node History Programming Example +@section History Programming Example + +The following program demonstrates simple use of the GNU History Library. + +@smallexample +main () +@{ + char line[1024], *t; + int len, done = 0; + + line[0] = 0; + + using_history (); + while (!done) + @{ + printf ("history$ "); + fflush (stdout); + t = fgets (line, sizeof (line) - 1, stdin); + if (t && *t) + @{ + len = strlen (t); + if (t[len - 1] == '\n') + t[len - 1] = '\0'; + @} + + if (!t) + strcpy (line, "quit"); + + if (line[0]) + @{ + char *expansion; + int result; + + result = history_expand (line, &expansion); + if (result) + fprintf (stderr, "%s\n", expansion); + + if (result < 0 || result == 2) + @{ + free (expansion); + continue; + @} + + add_history (expansion); + strncpy (line, expansion, sizeof (line) - 1); + free (expansion); + @} + + if (strcmp (line, "quit") == 0) + done = 1; + else if (strcmp (line, "save") == 0) + write_history ("history_file"); + else if (strcmp (line, "read") == 0) + read_history ("history_file"); + else if (strcmp (line, "list") == 0) + @{ + register HIST_ENTRY **the_list; + register int i; + + the_list = history_list (); + if (the_list) + for (i = 0; the_list[i]; i++) + printf ("%d: %s\n", i + history_base, the_list[i]->line); + @} + else if (strncmp (line, "delete", 6) == 0) + @{ + int which; + if ((sscanf (line + 6, "%d", &which)) == 1) + @{ + HIST_ENTRY *entry = remove_history (which); + if (!entry) + fprintf (stderr, "No such entry %d\n", which); + else + @{ + free (entry->line); + free (entry); + @} + @} + else + @{ + fprintf (stderr, "non-numeric arg given to `delete'\n"); + @} + @} + @} +@} +@end smallexample diff --git a/readline/doc/hsuser.texinfo b/readline/doc/hsuser.texinfo new file mode 100644 index 00000000000..7c4582d2ace --- /dev/null +++ b/readline/doc/hsuser.texinfo @@ -0,0 +1,398 @@ +@ignore +This file documents the user interface to the GNU History library. + +Copyright (C) 1988, 1991, 1996 Free Software Foundation, Inc. +Authored by Brian Fox and Chet Ramey. + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@node Using History Interactively +@chapter Using History Interactively + +@ifset BashFeatures +This chapter describes how to use the GNU History Library interactively, +from a user's standpoint. It should be considered a user's guide. For +information on using the GNU History Library in other programs, +see the GNU Readline Library Manual. +@end ifset +@ifclear BashFeatures +This chapter describes how to use the GNU History Library interactively, +from a user's standpoint. It should be considered a user's guide. For +information on using the GNU History Library in your own programs, +@pxref{Programming with GNU History}. +@end ifclear + +@ifset BashFeatures +@menu +* Bash History Facilities:: How Bash lets you manipulate your command + history. +* Bash History Builtins:: The Bash builtin commands that manipulate + the command history. +* History Interaction:: What it feels like using History as a user. +@end menu +@end ifset +@ifclear BashFeatures +@menu +* History Interaction:: What it feels like using History as a user. +@end menu +@end ifclear + +@ifset BashFeatures +@node Bash History Facilities +@section Bash History Facilities +@cindex command history +@cindex history list + +When the @samp{-o history} option to the @code{set} builtin +is enabled (@pxref{The Set Builtin}), +the shell provides access to the @var{command history}, +the list of commands previously typed. The text of the last +@code{HISTSIZE} +commands (default 500) is saved in a history list. The shell +stores each command in the history list prior to parameter and +variable expansion +but after history expansion is performed, subject to the +values of the shell variables +@code{HISTIGNORE} and @code{HISTCONTROL}. +When the shell starts up, the history is initialized from the +file named by the @code{HISTFILE} variable (default @file{~/.bash_history}). +@code{HISTFILE} is truncated, if necessary, to contain no more than +the number of lines specified by the value of the @code{HISTFILESIZE} +variable. When an interactive shell exits, the last +@code{HISTSIZE} lines are copied from the history list to @code{HISTFILE}. +If the @code{histappend} shell option is set (@pxref{Bash Builtins}), +the lines are appended to the history file, +otherwise the history file is overwritten. +If @code{HISTFILE} +is unset, or if the history file is unwritable, the history is +not saved. After saving the history, the history file is truncated +to contain no more than @code{$HISTFILESIZE} +lines. If @code{HISTFILESIZE} is not set, no truncation is performed. + +The builtin command @code{fc} may be used to list or edit and re-execute +a portion of the history list. +The @code{history} builtin can be used to display or modify the history +list and manipulate the history file. +When using the command-line editing, search commands +are available in each editing mode that provide access to the +history list. + +The shell allows control over which commands are saved on the history +list. The @code{HISTCONTROL} and @code{HISTIGNORE} +variables may be set to cause the shell to save only a subset of the +commands entered. +The @code{cmdhist} +shell option, if enabled, causes the shell to attempt to save each +line of a multi-line command in the same history entry, adding +semicolons where necessary to preserve syntactic correctness. +The @code{lithist} +shell option causes the shell to save the command with embedded newlines +instead of semicolons. +@xref{Bash Builtins}, for a description of @code{shopt}. + +@node Bash History Builtins +@section Bash History Builtins +@cindex history builtins + +Bash provides two builtin commands that allow you to manipulate the +history list and history file. + +@table @code + +@item fc +@comment btindex fc +@example +@code{fc [-e @var{ename}] [-nlr] [@var{first}] [@var{last}]} +@code{fc -s [@var{pat}=@var{rep}] [@var{command}]} +@end example + +Fix Command. In the first form, a range of commands from @var{first} to +@var{last} is selected from the history list. Both @var{first} and +@var{last} may be specified as a string (to locate the most recent +command beginning with that string) or as a number (an index into the +history list, where a negative number is used as an offset from the +current command number). If @var{last} is not specified it is set to +@var{first}. If @var{first} is not specified it is set to the previous +command for editing and @minus{}16 for listing. If the @samp{-l} flag is +given, the commands are listed on standard output. The @samp{-n} flag +suppresses the command numbers when listing. The @samp{-r} flag +reverses the order of the listing. Otherwise, the editor given by +@var{ename} is invoked on a file containing those commands. If +@var{ename} is not given, the value of the following variable expansion +is used: @code{$@{FCEDIT:-$@{EDITOR:-vi@}@}}. This says to use the +value of the @code{FCEDIT} variable if set, or the value of the +@code{EDITOR} variable if that is set, or @code{vi} if neither is set. +When editing is complete, the edited commands are echoed and executed. + +In the second form, @var{command} is re-executed after each instance +of @var{pat} in the selected command is replaced by @var{rep}. + +A useful alias to use with the @code{fc} command is @code{r='fc -s'}, so +that typing @samp{r cc} runs the last command beginning with @code{cc} +and typing @samp{r} re-executes the last command (@pxref{Aliases}). + +@item history +@comment btindex history +@example +history [-c] [@var{n}] +history [-anrw] [@var{filename}] +history -ps @var{arg} +@end example + +Display the history list with line numbers. Lines prefixed with +with a @samp{*} have been modified. An argument of @var{n} says +to list only the last @var{n} lines. Options, if supplied, have +the following meanings: + +@table @code +@item -w +Write out the current history to the history file. + +@item -r +Read the current history file and append its contents to +the history list. + +@item -a +Append the new +history lines (history lines entered since the beginning of the +current Bash session) to the history file. + +@item -n +Append the history lines not already read from the history file +to the current history list. These are lines appended to the history +file since the beginning of the current Bash session. + +@item -c +Clear the history list. This may be combined +with the other options to replace the history list completely. + +@item -s +The @var{arg}s are added to the end of +the history list as a single entry. + +@item -p +Perform history substitution on the @var{arg}s and display the result +on the standard output, without storing the results in the history list. +@end table + +When the @samp{-w}, @samp{-r}, @samp{-a}, or @samp{-n} option is +used, if @var{filename} +is given, then it is used as the history file. If not, then +the value of the @code{HISTFILE} variable is used. + +@end table +@end ifset + +@node History Interaction +@section History Expansion +@cindex history expansion + +The History library provides a history expansion feature that is similar +to the history expansion provided by @code{csh}. This section +describes the syntax used to manipulate the history information. + +History expansions introduce words from the history list into +the input stream, making it easy to repeat commands, insert the +arguments to a previous command into the current input line, or +fix errors in previous commands quickly. + +History expansion takes place in two parts. The first is to determine +which line from the history list should be used during substitution. +The second is to select portions of that line for inclusion into the +current one. The line selected from the history is called the +@dfn{event}, and the portions of that line that are acted upon are +called @dfn{words}. Various @dfn{modifiers} are available to manipulate +the selected words. The line is broken into words in the same fashion +that Bash does, so that several words +surrounded by quotes are considered one word. +History expansions are introduced by the appearance of the +history expansion character, which is @samp{!} by default. +@ifset BashFeatures +Only @samp{\} and @samp{'} may be used to escape the history expansion +character. +@end ifset + +@ifset BashFeatures +Several shell options settable with the @code{shopt} +builtin (@pxref{Bash Builtins}) may be used to tailor +the behavior of history expansion. If the +@code{histverify} shell option is enabled, and Readline +is being used, history substitutions are not immediately passed to +the shell parser. +Instead, the expanded line is reloaded into the Readline +editing buffer for further modification. +If Readline is being used, and the @code{histreedit} +shell option is enabled, a failed history expansion will be +reloaded into the Readline editing buffer for correction. +The @samp{-p} option to the @code{history} builtin command +may be used to see what a history expansion will do before using it. +The @samp{-s} option to the @code{history} builtin may be used to +add commands to the end of the history list without actually executing +them, so that they are available for subsequent recall. +This is most useful in conjunction with Readline. + +The shell allows control of the various characters used by the +history expansion mechanism with the @code{histchars} variable. +@end ifset + +@menu +* Event Designators:: How to specify which history line to use. +* Word Designators:: Specifying which words are of interest. +* Modifiers:: Modifying the results of substitution. +@end menu + +@node Event Designators +@subsection Event Designators +@cindex event designators + +An event designator is a reference to a command line entry in the +history list. +@cindex history events + +@table @asis + +@item @code{!} +Start a history substitution, except when followed by a space, tab, +the end of the line, @samp{=} or @samp{(}. + +@item @code{!@var{n}} +Refer to command line @var{n}. + +@item @code{!-@var{n}} +Refer to the command @var{n} lines back. + +@item @code{!!} +Refer to the previous command. This is a synonym for @samp{!-1}. + +@item @code{!@var{string}} +Refer to the most recent command starting with @var{string}. + +@item @code{!?@var{string}[?]} +Refer to the most recent command containing @var{string}. The trailing +@samp{?} may be omitted if the @var{string} is followed immediately by +a newline. + +@item @code{^@var{string1}^@var{string2}^} +Quick Substitution. Repeat the last command, replacing @var{string1} +with @var{string2}. Equivalent to +@code{!!:s/@var{string1}/@var{string2}/}. + +@item @code{!#} +The entire command line typed so far. + +@end table + +@node Word Designators +@subsection Word Designators + +Word designators are used to select desired words from the event. +A @samp{:} separates the event specification from the word designator. It +may be omitted if the word designator begins with a @samp{^}, @samp{$}, +@samp{*}, @samp{-}, or @samp{%}. Words are numbered from the beginning +of the line, with the first word being denoted by 0 (zero). Words are +inserted into the current line separated by single spaces. + +@table @code + +@item 0 (zero) +The @code{0}th word. For many applications, this is the command word. + +@item @var{n} +The @var{n}th word. + +@item ^ +The first argument; that is, word 1. + +@item $ +The last argument. + +@item % +The word matched by the most recent @samp{?@var{string}?} search. + +@item @var{x}-@var{y} +A range of words; @samp{-@var{y}} abbreviates @samp{0-@var{y}}. + +@item * +All of the words, except the @code{0}th. This is a synonym for @samp{1-$}. +It is not an error to use @samp{*} if there is just one word in the event; +the empty string is returned in that case. + +@item @var{x}* +Abbreviates @samp{@var{x}-$} + +@item @var{x}- +Abbreviates @samp{@var{x}-$} like @samp{@var{x}*}, but omits the last word. + +@end table + +If a word designator is supplied without an event specification, the +previous command is used as the event. + +@node Modifiers +@subsection Modifiers + +After the optional word designator, you can add a sequence of one or more +of the following modifiers, each preceded by a @samp{:}. + +@table @code + +@item h +Remove a trailing pathname component, leaving only the head. + +@item t +Remove all leading pathname components, leaving the tail. + +@item r +Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving +the basename. + +@item e +Remove all but the trailing suffix. + +@item p +Print the new command but do not execute it. + +@ifset BashFeatures +@item q +Quote the substituted words, escaping further substitutions. + +@item x +Quote the substituted words as with @samp{q}, +but break into words at spaces, tabs, and newlines. +@end ifset + +@item s/@var{old}/@var{new}/ +Substitute @var{new} for the first occurrence of @var{old} in the +event line. Any delimiter may be used in place of @samp{/}. +The delimiter may be quoted in @var{old} and @var{new} +with a single backslash. If @samp{&} appears in @var{new}, +it is replaced by @var{old}. A single backslash will quote +the @samp{&}. The final delimiter is optional if it is the last +character on the input line. + +@item & +Repeat the previous substitution. + +@item g +Cause changes to be applied over the entire event line. Used in +conjunction with @samp{s}, as in @code{gs/@var{old}/@var{new}/}, +or with @samp{&}. + +@end table diff --git a/readline/doc/inc-hist.texi b/readline/doc/inc-hist.texi new file mode 100644 index 00000000000..9cdde401cd2 --- /dev/null +++ b/readline/doc/inc-hist.texi @@ -0,0 +1,159 @@ +@ignore +This file is completely identical to hsuser.texinfo, except that it has the +reference to the programming manual removed. There are definately better ways +to do this! + +This file documents the user interface to the GNU History library. + +Copyright (C) 1988, 1991 Free Software Foundation, Inc. +Authored by Brian Fox. + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@node Using History Interactively +@appendix Using History Interactively + +This chapter describes how to use the GNU History Library interactively, +from a user's standpoint. + +@menu +* History Interaction:: What it feels like using History as a user. +@end menu + +@node History Interaction +@section History Interaction +@cindex expansion + +The History library provides a history expansion feature similar +to the history expansion in @code{csh}. The following text describes the +syntax you use to manipulate history information. + +History expansion takes two parts. In the first part, determine +which line from the previous history will be used for substitution. +This line is called the @dfn{event}. +In the second part, select portions of that line for inclusion into the +current line. These portions are called @dfn{words}. +@value{GDBN} breaks the line into words in the same +way that the Bash shell does, so that several English (or Unix) words +surrounded by quotes are considered one word. + +@menu +* Event Designators:: How to specify which history line to use. +* Word Designators:: Specifying which words are of interest. +* Modifiers:: Modifying the results of susbstitution. +@end menu + +@node Event Designators +@subsection Event Designators +@cindex event designators + +An @dfn{event designator} is a reference to a command line entry in the +history list. + +@table @asis + +@item @code{!} +Start a history subsititution, except when followed by a space, tab, or +the end of the line... @key{=} or @key{(}. + +@item @code{!!} +Refer to the previous command. This is a synonym for @code{!-1}. + +@item @code{!n} +Refer to command line @var{n}. + +@item @code{!-n} +Refer to the command line @var{n} lines back. + +@item @code{!string} +Refer to the most recent command starting with @var{string}. + +@item @code{!?string}[@code{?}] +Refer to the most recent command containing @var{string}. + +@end table + +@node Word Designators +@subsection Word Designators + +A @key{:} separates the event designator from the @dfn{word designator}. +It can be omitted if the word designator begins with a @key{^}, @key{$}, +@key{*} or @key{%}. Words are numbered from the beginning of the line, +with the first word being denoted by a 0 (zero). + +@table @code + +@item 0 (zero) +The zero'th word. For many applications, this is the command word. + +@item n +The @var{n}'th word. + +@item ^ +The first argument. that is, word 1. + +@item $ +The last argument. + +@item % +The word matched by the most recent @code{?string?} search. + +@item x-y +A range of words; @code{-@var{y}} Abbreviates @code{0-@var{y}}. + +@item * +All of the words, excepting the zero'th. This is a synonym for @code{1-$}. +It is not an error to use @key{*} if there is just one word in the event. +The empty string is returned in that case. + +@end table + +@node Modifiers +@subsection Modifiers + +After the optional word designator, you can add a sequence of one or more +of the following @dfn{modifiers}, each preceded by a @key{:}. + +@table @code + +@item # +The entire command line typed so far. This means the current command, +not the previous command. +@c +@c FIXME: If it doesn't belong here, let's put it where it does. +@c +@c so it technically isn't a word designator and doesn't belong in +@c this section. + +@item h +Remove a trailing pathname component, leaving only the head. + +@item r +Remove a trailing suffix of the form @samp{.}@var{suffix}, leaving the basename. + +@item e +Remove all but the suffix. + +@item t +Remove all leading pathname components, leaving the tail. + +@item p +Print the new command but do not execute it. +@end table diff --git a/readline/doc/readline.3 b/readline/doc/readline.3 new file mode 100644 index 00000000000..bb9f7590258 --- /dev/null +++ b/readline/doc/readline.3 @@ -0,0 +1,1181 @@ +.\" +.\" MAN PAGE COMMENTS to +.\" +.\" Chet Ramey +.\" Information Network Services +.\" Case Western Reserve University +.\" chet@ins.CWRU.Edu +.\" +.\" Last Change: Thu Feb 19 10:26:47 EST 1998 +.\" +.TH READLINE 3 "1998 Feb 19" GNU +.\" +.\" File Name macro. This used to be `.PN', for Path Name, +.\" but Sun doesn't seem to like that very much. +.\" +.de FN +\fI\|\\$1\|\fP +.. +.SH NAME +readline \- get a line from a user with editing +.SH SYNOPSIS +.LP +.nf +.ft B +#include <readline.h> +#include <history.h> +.ft +.fi +.LP +.nf +.ft B +char *readline (prompt) +char *prompt; +.ft +.fi +.SH COPYRIGHT +.if n Readline is Copyright (C) 1989, 1991, 1993, 1995, 1996 by the Free Software Foundation, Inc. +.if t Readline is Copyright \(co 1989, 1991, 1993, 1995, 1996 by the Free Software Foundation, Inc. +.SH DESCRIPTION +.LP +.B readline +will read a line from the terminal +and return it, using +.B prompt +as a prompt. If +.B prompt +is null, no prompt is issued. The line returned is allocated with +.IR malloc (3), +so the caller must free it when finished. The line returned +has the final newline removed, so only the text of the line +remains. +.LP +.B readline +offers editing capabilities while the user is entering the +line. +By default, the line editing commands +are similar to those of emacs. +A vi\-style line editing interface is also available. +.SH RETURN VALUE +.LP +.B readline +returns the text of the line read. A blank line +returns the empty string. If +.B EOF +is encountered while reading a line, and the line is empty, +.B NULL +is returned. If an +.B EOF +is read with a non\-empty line, it is +treated as a newline. +.SH NOTATION +.LP +An emacs-style notation is used to denote +keystrokes. Control keys are denoted by C\-\fIkey\fR, e.g., C\-n +means Control\-N. Similarly, +.I meta +keys are denoted by M\-\fIkey\fR, so M\-x means Meta\-X. (On keyboards +without a +.I meta +key, M\-\fIx\fP means ESC \fIx\fP, i.e., press the Escape key +then the +.I x +key. This makes ESC the \fImeta prefix\fP. +The combination M\-C\-\fIx\fP means ESC\-Control\-\fIx\fP, +or press the Escape key +then hold the Control key while pressing the +.I x +key.) +.PP +Readline commands may be given numeric +.IR arguments , +which normally act as a repeat count. Sometimes, however, it is the +sign of the argument that is significant. Passing a negative argument +to a command that acts in the forward direction (e.g., \fBkill\-line\fP) +causes that command to act in a backward direction. Commands whose +behavior with arguments deviates from this are noted. +.PP +When a command is described as \fIkilling\fP text, the text +deleted is saved for possible future retrieval +(\fIyanking\fP). The killed text is saved in a +\fIkill ring\fP. Consecutive kills cause the text to be +accumulated into one unit, which can be yanked all at once. +Commands which do not kill text separate the chunks of text +on the kill ring. +.SH INITIALIZATION FILE +.LP +Readline is customized by putting commands in an initialization +file (the \fIinputrc\fP file). +The name of this file is taken from the value of the +.B INPUTRC +environment variable. If that variable is unset, the default is +.IR ~/.inputrc . +When a program which uses the readline library starts up, the +init file is read, and the key bindings and variables are set. +There are only a few basic constructs allowed in the +readline init file. Blank lines are ignored. +Lines beginning with a \fB#\fP are comments. +Lines beginning with a \fB$\fP indicate conditional constructs. +Other lines denote key bindings and variable settings. +Each program using this library may add its own commands +and bindings. +.PP +For example, placing +.RS +.PP +M\-Control\-u: universal\-argument +.RE +or +.RS +C\-Meta\-u: universal\-argument +.RE +into the +.I inputrc +would make M\-C\-u execute the readline command +.IR universal\-argument . +.PP +The following symbolic character names are recognized while +processing key bindings: +.IR RUBOUT , +.IR DEL , +.IR ESC , +.IR LFD , +.IR NEWLINE , +.IR RET , +.IR RETURN , +.IR SPC , +.IR SPACE , +and +.IR TAB . +In addition to command names, readline allows keys to be bound +to a string that is inserted when the key is pressed (a \fImacro\fP). +.PP +.SS Key Bindings +.PP +The syntax for controlling key bindings in the +.I inputrc +file is simple. All that is required is the name of the +command or the text of a macro and a key sequence to which +it should be bound. The name may be specified in one of two ways: +as a symbolic key name, possibly with \fIMeta\-\fP or \fIControl\-\fP +prefixes, or as a key sequence. +When using the form \fBkeyname\fP:\^\fIfunction-name\fP or \fImacro\fP, +.I keyname +is the name of a key spelled out in English. For example: +.sp +.RS +Control\-u: universal\-argument +.br +Meta\-Rubout: backward\-kill\-word +.br +Control\-o: ">&output" +.RE +.LP +In the above example, +.I C\-u +is bound to the function +.BR universal\-argument , +.I M-DEL +is bound to the function +.BR backward\-kill\-word , +and +.I C\-o +is bound to run the macro +expressed on the right hand side (that is, to insert the text +.I >&output +into the line). +.PP +In the second form, \fB"keyseq"\fP:\^\fIfunction\-name\fP or \fImacro\fP, +.B keyseq +differs from +.B keyname +above in that strings denoting +an entire key sequence may be specified by placing the sequence +within double quotes. Some GNU Emacs style key escapes can be +used, as in the following example. +.sp +.RS +"\eC\-u": universal\-argument +.br +"\eC\-x\eC\-r": re\-read\-init\-file +.br +"\ee[11~": "Function Key 1" +.RE +.PP +In this example, +.I C-u +is again bound to the function +.BR universal\-argument . +.I "C-x C-r" +is bound to the function +.BR re\-read\-init\-file , +and +.I "ESC [ 1 1 ~" +is bound to insert the text +.BR "Function Key 1" . +The full set of GNU Emacs style escape sequences is +.RS +.PD 0 +.TP +.B \eC\- +control prefix +.TP +.B \eM\- +meta prefix +.TP +.B \ee +an escape character +.TP +.B \e\e +backslash +.TP +.B \e" +literal " +.TP +.B \e' +literal ' +.RE +.PD +.PP +In addition to the GNU Emacs style escape sequences, a second +set of backslash escapes is available: +.RS +.PD 0 +.TP +.B \ea +alert (bell) +.TP +.B \eb +backspace +.TP +.B \ed +delete +.TP +.B \ef +form feed +.TP +.B \en +newline +.TP +.B \er +carriage return +.TP +.B \et +horizontal tab +.TP +.B \ev +vertical tab +.TP +.B \e\fInnn\fP +the character whose ASCII code is the octal value \fInnn\fP +(one to three digits) +.TP +.B \ex\fInnn\fP +the character whose ASCII code is the hexadecimal value \fInnn\fP +(one to three digits) +.RE +.PD +.PP +When entering the text of a macro, single or double quotes should +be used to indicate a macro definition. Unquoted text +is assumed to be a function name. +In the macro body, the backslash escapes described above are expanded. +Backslash will quote any other character in the macro text, +including " and '. +.PP +.B Bash +allows the current readline key bindings to be displayed or modified +with the +.B bind +builtin command. The editing mode may be switched during interactive +use by using the +.B \-o +option to the +.B set +builtin command. Other programs using this library provide +similar mechanisms. The +.I inputrc +file may be edited and re-read if a program does not provide +any other means to incorporate new bindings. +.SS Variables +.PP +Readline has variables that can be used to further customize its +behavior. A variable may be set in the +.I inputrc +file with a statement of the form +.RS +.PP +\fBset\fP \fIvariable\-name\fP \fIvalue\fP +.RE +.PP +Except where noted, readline variables can take the values +.B On +or +.BR Off . +The variables and their default values are: +.PP +.PD 0 +.TP +.B bell\-style (audible) +Controls what happens when readline wants to ring the terminal bell. +If set to \fBnone\fP, readline never rings the bell. If set to +\fBvisible\fP, readline uses a visible bell if one is available. +If set to \fBaudible\fP, readline attempts to ring the terminal's bell. +.TP +.B comment\-begin (``#'') +The string that is inserted in \fBvi\fP mode when the +.B insert\-comment +command is executed. +This command is bound to +.B M\-# +in emacs mode and to +.B # +in vi command mode. +.TP +.B completion\-ignore\-case (Off) +If set to \fBOn\fP, readline performs filename matching and completion +in a case\-insensitive fashion. +.TP +.B completion\-query\-items (100) +This determines when the user is queried about viewing +the number of possible completions +generated by the \fBpossible\-completions\fP command. +It may be set to any integer value greater than or equal to +zero. If the number of possible completions is greater than +or equal to the value of this variable, the user is asked whether +or not he wishes to view them; otherwise they are simply listed +on the terminal. +.TP +.B convert\-meta (On) +If set to \fBOn\fP, readline will convert characters with the +eighth bit set to an ASCII key sequence +by stripping the eighth bit and prepending an +escape character (in effect, using escape as the \fImeta prefix\fP). +.TP +.B disable\-completion (Off) +If set to \fBOn\fP, readline will inhibit word completion. Completion +characters will be inserted into the line as if they had been +mapped to \fBself-insert\fP. +.TP +.B editing\-mode (emacs) +Controls whether readline begins with a set of key bindings similar +to \fIemacs\fP or \fIvi\fP. +.B editing\-mode +can be set to either +.B emacs +or +.BR vi . +.TP +.B enable\-keypad (Off) +When set to \fBOn\fP, readline will try to enable the application +keypad when it is called. Some systems need this to enable the +arrow keys. +.TP +.B expand\-tilde (Off) +If set to \fBon\fP, tilde expansion is performed when readline +attempts word completion. +.TP +.B horizontal\-scroll\-mode (Off) +When set to \fBOn\fP, makes readline use a single line for display, +scrolling the input horizontally on a single screen line when it +becomes longer than the screen width rather than wrapping to a new line. +.TP +.B keymap (emacs) +Set the current readline keymap. The set of legal keymap names is +\fIemacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, +vi-command\fP, and +.IR vi-insert . +\fIvi\fP is equivalent to \fIvi-command\fP; \fIemacs\fP is +equivalent to \fIemacs-standard\fP. The default value is +.IR emacs ; +the value of +.B editing\-mode +also affects the default keymap. +.TP +.B mark\-directories (On) +If set to \fBOn\fP, complete<d directory names have a slash +appended. +.TP +.B mark\-modified\-lines (Off) +If set to \fBOn\fP, history lines that have been modified are displayed +with a preceding asterisk (\fB*\fP). +.TP +.B meta\-flag (Off) +If set to \fBOn\fP, readline will enable eight-bit input (that is, +it will not strip the high bit from the characters it reads), +regardless of what the terminal claims it can support. +.TP +.B output\-meta (Off) +If set to \fBOn\fP, readline will display characters with the +eighth bit set directly rather than as a meta-prefixed escape +sequence. +.TP +.B print\-completions\-horizontally (Off) +If set to \fBOn\fP, readline will display completions with matches +sorted horizontally in alphabetical order, rather than down the screen. +.TP +.B show\-all\-if\-ambiguous (Off) +This alters the default behavior of the completion functions. If +set to +.BR on , +words which have more than one possible completion cause the +matches to be listed immediately instead of ringing the bell. +.TP +.B visible\-stats (Off) +If set to \fBOn\fP, a character denoting a file's type as reported +by \fBstat\fP(2) is appended to the filename when listing possible +completions. +.PD +.SS Conditional Constructs +.PP +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key +bindings and variable settings to be performed as the result +of tests. There are four parser directives used. +.IP \fB$if\fP +The +.B $if +construct allows bindings to be made based on the +editing mode, the terminal being used, or the application using +readline. The text of the test extends to the end of the line; +no characters are required to isolate it. +.RS +.IP \fBmode\fP +The \fBmode=\fP form of the \fB$if\fP directive is used to test +whether readline is in emacs or vi mode. +This may be used in conjunction +with the \fBset keymap\fP command, for instance, to set bindings in +the \fIemacs-standard\fP and \fIemacs-ctlx\fP keymaps only if +readline is starting out in emacs mode. +.IP \fBterm\fP +The \fBterm=\fP form may be used to include terminal-specific +key bindings, perhaps to bind the key sequences output by the +terminal's function keys. The word on the right side of the +.B = +is tested against the full name of the terminal and the portion +of the terminal name before the first \fB\-\fP. This allows +.I sun +to match both +.I sun +and +.IR sun\-cmd , +for instance. +.IP \fBapplication\fP +The \fBapplication\fP construct is used to include +application-specific settings. Each program using the readline +library sets the \fIapplication name\fP, and an initialization +file can test for a particular value. +This could be used to bind key sequences to functions useful for +a specific program. For instance, the following command adds a +key sequence that quotes the current or previous word in Bash: +.sp 1 +.RS +.nf +\fB$if\fP bash +# Quote the current or previous word +"\eC-xq": "\eeb\e"\eef\e"" +\fB$endif\fP +.fi +.RE +.RE +.IP \fB$endif\fP +This command, as seen in the previous example, terminates an +\fB$if\fP command. +.IP \fB$else\fP +Commands in this branch of the \fB$if\fP directive are executed if +the test fails. +.IP \fB$include\fP +This directive takes a single filename as an argument and reads commands +and bindings from that file. For example, the following directive +would read \fI/etc/inputrc\fP: +.sp 1 +.RS +.nf +\fB$include\fP \^ \fI/etc/inputrc\fP +.fi +.RE +.SH SEARCHING +.PP +Readline provides commands for searching through the command history +for lines containing a specified string. +There are two search modes: +.I incremental +and +.IR non-incremental . +.PP +Incremental searches begin before the user has finished typing the +search string. +As each character of the search string is typed, readline displays +the next entry from the history matching the string typed so far. +An incremental search requires only as many characters as needed to +find the desired history entry. +The Escape character is used to terminate an incremental search. +Control-J will also terminate the search. +Control-G will abort an incremental search and restore the original +line. +When the search is terminated, the history entry containing the +search string becomes the current line. +To find other matching entries in the history list, type Control-S or +Control-R as appropriate. +This will search backward or forward in the history for the next +line matching the search string typed so far. +Any other key sequence bound to a readline command will terminate +the search and execute that command. +For instance, a \fInewline\fP will terminate the search and accept +the line, thereby executing the command from the history list. +.PP +Non-incremental searches read the entire search string before starting +to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. +.SH EDITING COMMANDS +.PP +The following is a list of the names of the commands and the default +key sequences to which they are bound. +Command names without an accompanying key sequence are unbound by default. +.SS Commands for Moving +.PP +.PD 0 +.TP +.B beginning\-of\-line (C\-a) +Move to the start of the current line. +.TP +.B end\-of\-line (C\-e) +Move to the end of the line. +.TP +.B forward\-char (C\-f) +Move forward a character. +.TP +.B backward\-char (C\-b) +Move back a character. +.TP +.B forward\-word (M\-f) +Move forward to the end of the next word. Words are composed of +alphanumeric characters (letters and digits). +.TP +.B backward\-word (M\-b) +Move back to the start of this, or the previous, word. Words are +composed of alphanumeric characters (letters and digits). +.TP +.B clear\-screen (C\-l) +Clear the screen leaving the current line at the top of the screen. +With an argument, refresh the current line without clearing the +screen. +.TP +.B redraw\-current\-line +Refresh the current line. +.PD +.SS Commands for Manipulating the History +.PP +.PD 0 +.TP +.B accept\-line (Newline, Return) +Accept the line regardless of where the cursor is. If this line is +non-empty, add it to the history list. If the line is a modified +history line, then restore the history line to its original state. +.TP +.B previous\-history (C\-p) +Fetch the previous command from the history list, moving back in +the list. +.TP +.B next\-history (C\-n) +Fetch the next command from the history list, moving forward in the +list. +.TP +.B beginning\-of\-history (M\-<) +Move to the first line in the history. +.TP +.B end\-of\-history (M\->) +Move to the end of the input history, i.e., the line currently being +entered. +.TP +.B reverse\-search\-history (C\-r) +Search backward starting at the current line and moving `up' through +the history as necessary. This is an incremental search. +.TP +.B forward\-search\-history (C\-s) +Search forward starting at the current line and moving `down' through +the history as necessary. This is an incremental search. +.TP +.B non\-incremental\-reverse\-search\-history (M\-p) +Search backward through the history starting at the current line +using a non-incremental search for a string supplied by the user. +.TP +.B non\-incremental\-forward\-search\-history (M\-n) +Search forward through the history using a non-incremental search +for a string supplied by the user. +.TP +.B history\-search\-forward +Search forward through the history for the string of characters +between the start of the current line and the current cursor +position (the \fIpoint\fP). +This is a non-incremental search. +.TP +.B history\-search\-backward +Search backward through the history for the string of characters +between the start of the current line and the point. +This is a non-incremental search. +.TP +.B yank\-nth\-arg (M\-C\-y) +Insert the first argument to the previous command (usually +the second word on the previous line) at point (the current +cursor position). With an argument +.IR n , +insert the \fIn\fPth word from the previous command (the words +in the previous command begin with word 0). A negative argument +inserts the \fIn\fPth word from the end of the previous command. +.TP +.B +yank\-last\-arg (M\-.\^, M\-_\^) +Insert the last argument to the previous command (the last word of +the previous history entry). With an argument, +behave exactly like \fByank\-nth\-arg\fP. +Successive calls to \fByank\-last\-arg\fP move back through the history +list, inserting the last argument of each line in turn. +.PD +.SS Commands for Changing Text +.PP +.PD 0 +.TP +.B delete\-char (C\-d) +Delete the character under the cursor. If point is at the +beginning of the line, there are no characters in the line, and +the last character typed was not bound to \fBBdelete\-char\fP, then return +.SM +.BR EOF . +.TP +.B backward\-delete\-char (Rubout) +Delete the character behind the cursor. When given a numeric argument, +save the deleted text on the kill ring. +.TP +.B quoted\-insert (C\-q, C\-v) +Add the next character that you type to the line verbatim. This is +how to insert characters like \fBC\-q\fP, for example. +.TP +.B tab\-insert (M-TAB) +Insert a tab character. +.TP +.B self\-insert (a,\ b,\ A,\ 1,\ !,\ ...) +Insert the character typed. +.TP +.B transpose\-chars (C\-t) +Drag the character before point forward over the character at point. +Point moves forward as well. If point is at the end of the line, then +transpose the two characters before point. Negative arguments don't work. +.TP +.B transpose\-words (M\-t) +Drag the word behind the cursor past the word in front of the cursor +moving the cursor over that word as well. +.TP +.B upcase\-word (M\-u) +Uppercase the current (or following) word. With a negative argument, +uppercase the previous word, but do not move point. +.TP +.B downcase\-word (M\-l) +Lowercase the current (or following) word. With a negative argument, +lowercase the previous word, but do not move point. +.TP +.B capitalize\-word (M\-c) +Capitalize the current (or following) word. With a negative argument, +capitalize the previous word, but do not move point. +.PD +.SS Killing and Yanking +.PP +.PD 0 +.TP +.B kill\-line (C\-k) +Kill the text from the current cursor position to the end of the line. +.TP +.B backward\-kill\-line (C\-x Rubout) +Kill backward to the beginning of the line. +.TP +.B unix\-line\-discard (C\-u) +Kill backward from point to the beginning of the line. +The killed text is saved on the kill-ring. +.\" There is no real difference between this and backward-kill-line +.TP +.B kill\-whole\-line +Kill all characters on the current line, no matter where the +cursor is. +.TP +.B kill\-word (M\-d) +Kill from the cursor to the end of the current word, or if between +words, to the end of the next word. Word boundaries are the same as +those used by \fBforward\-word\fP. +.TP +.B backward\-kill\-word (M\-Rubout) +Kill the word behind the cursor. Word boundaries are the same as +those used by \fBbackward\-word\fP. +.TP +.B unix\-word\-rubout (C\-w) +Kill the word behind the cursor, using white space as a word boundary. +The word boundaries are different from +.BR backward\-kill\-word . +.TP +.B delete\-horizontal\-space (M\-\e) +Delete all spaces and tabs around point. +.TP +.B kill\-region +Kill the text between the point and \fImark\fP (saved cursor position). +This text is referred to as the \fIregion\fP. +.TP +.B copy\-region\-as\-kill +Copy the text in the region to the kill buffer. +.TP +.B copy\-backward\-word +Copy the word before point to the kill buffer. +The word boundaries are the same as \fBbackward\-word\fP. +.TP +.B copy\-forward\-word +Copy the word following point to the kill buffer. +The word boundaries are the same as \fBforward\-word\fP. +.TP +.B yank (C\-y) +Yank the top of the kill ring into the buffer at the cursor. +.TP +.B yank\-pop (M\-y) +Rotate the kill ring, and yank the new top. Only works following +.B yank +or +.BR yank\-pop . +.PD +.SS Numeric Arguments +.PP +.PD 0 +.TP +.B digit\-argument (M\-0, M\-1, ..., M\-\-) +Add this digit to the argument already accumulating, or start a new +argument. M\-\- starts a negative argument. +.TP +.B universal\-argument +This is another way to specify an argument. +If this command is followed by one or more digits, optionally with a +leading minus sign, those digits define the argument. +If the command is followed by digits, executing +.B universal\-argument +again ends the numeric argument, but is otherwise ignored. +As a special case, if this command is immediately followed by a +character that is neither a digit or minus sign, the argument count +for the next command is multiplied by four. +The argument count is initially one, so executing this function the +first time makes the argument count four, a second time makes the +argument count sixteen, and so on. +.PD +.SS Completing +.PP +.PD 0 +.TP +.B complete (TAB) +Attempt to perform completion on the text before point. +The actual completion performed is application-specific. +.BR Bash , +for instance, attempts completion treating the text as a variable +(if the text begins with \fB$\fP), username (if the text begins with +\fB~\fP), hostname (if the text begins with \fB@\fP), or +command (including aliases and functions) in turn. If none +of these produces a match, filename completion is attempted. +.BR Gdb , +on the other hand, +allows completion of program functions and variables, and +only attempts filename completion under certain circumstances. +.TP +.B possible\-completions (M\-?) +List the possible completions of the text before point. +.TP +.B insert\-completions (M\-*) +Insert all completions of the text before point +that would have been generated by +\fBpossible\-completions\fP. +.TP +.B menu\-complete +Similar to \fBcomplete\fP, but replaces the word to be completed +with a single match from the list of possible completions. +Repeated execution of \fBmenu\-complete\fP steps through the list +of possible completions, inserting each match in turn. +At the end of the list of completions, the bell is rung and the +original text is restored. +An argument of \fIn\fP moves \fIn\fP positions forward in the list +of matches; a negative argument may be used to move backward +through the list. +This command is intended to be bound to \fBTAB\fP, but is unbound +by default. +.PD +.SS Keyboard Macros +.PP +.PD 0 +.TP +.B start\-kbd\-macro (C\-x (\^) +Begin saving the characters typed into the current keyboard macro. +.TP +.B end\-kbd\-macro (C\-x )\^) +Stop saving the characters typed into the current keyboard macro +and store the definition. +.TP +.B call\-last\-kbd\-macro (C\-x e) +Re-execute the last keyboard macro defined, by making the characters +in the macro appear as if typed at the keyboard. +.PD +.SS Miscellaneous +.PP +.PD 0 +.TP +.B re\-read\-init\-file (C\-x C\-r) +Read in the contents of the \fIinputrc\fP file, and incorporate +any bindings or variable assignments found there. +.TP +.B abort (C\-g) +Abort the current editing command and +ring the terminal's bell (subject to the setting of +.BR bell\-style ). +.TP +.B do\-uppercase\-version (M\-a, M\-b, M\-\fIx\fP, ...) +If the metafied character \fIx\fP is lowercase, run the command +that is bound to the corresponding uppercase character. +.TP +.B prefix\-meta (ESC) +Metafy the next character typed. +.SM +.B ESC +.B f +is equivalent to +.BR Meta\-f . +.TP +.B undo (C\-_, C\-x C\-u) +Incremental undo, separately remembered for each line. +.TP +.B revert\-line (M\-r) +Undo all changes made to this line. This is like executing the +.B undo +command enough times to return the line to its initial state. +.TP +.B tilde\-expand (M\-~) +Perform tilde expansion on the current word. +.TP +.B set\-mark (C\-@, M-<space>) +Set the mark to the current point. If a +numeric argument is supplied, the mark is set to that position. +.TP +.B exchange\-point\-and\-mark (C\-x C\-x) +Swap the point with the mark. The current cursor position is set to +the saved position, and the old cursor position is saved as the mark. +.TP +.B character\-search (C\-]) +A character is read and point is moved to the next occurrence of that +character. A negative count searches for previous occurrences. +.TP +.B character\-search\-backward (M\-C\-]) +A character is read and point is moved to the previous occurrence of that +character. A negative count searches for subsequent occurrences. +.TP +.B insert\-comment (M\-#) +The value of the readline +.B comment\-begin +variable is inserted at the beginning of the current line, and the line +is accepted as if a newline had been typed. This makes the current line +a shell comment. +.TP +.B dump\-functions +Print all of the functions and their key bindings to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-variables +Print all of the settable variables and their values to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-macros +Print all of the readline key sequences bound to macros and the +strings they ouput. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B emacs\-editing\-mode (C\-e) +When in +.B vi +editing mode, this causes a switch to +.B emacs +editing mode. +.TP +.B vi\-editing\-mode (M\-C\-j) +When in +.B emacs +editing mode, this causes a switch to +.B vi +editing mode. +.PD +.SH DEFAULT KEY BINDINGS +.LP +The following is a list of the default emacs and vi bindings. +Characters with the 8th bit set are written as M\-<character>, and +are referred to as +.I metafied +characters. +The printable ASCII characters not mentioned in the list of emacs +standard bindings are bound to the +.I self\-insert +function, which just inserts the given character into the input line. +In vi insertion mode, all characters not specifically mentioned are +bound to +.IR self\-insert . +Characters assigned to signal generation by +.IR stty (1) +or the terminal driver, such as C-Z or C-C, +retain that function. +Upper and lower case +.I metafied +characters are bound to the same function in the emacs mode +meta keymap. +The remaining characters are unbound, which causes readline +to ring the bell (subject to the setting of the +.B bell\-style +variable). +.SS Emacs Mode +.RS +.6i +.nf +.ta 2.5i +.sp +Emacs Standard bindings +.sp +"C-@" set-mark +"C-A" beginning-of-line +"C-B" backward-char +"C-D" delete-char +"C-E" end-of-line +"C-F" forward-char +"C-G" abort +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-]" character-search +"C-_" undo +"\^ " to "/" self-insert +"0" to "9" self-insert +":" to "~" self-insert +"C-?" backward-delete-char +.PP +Emacs Meta bindings +.sp +"M-C-G" abort +"M-C-H" backward-kill-word +"M-C-I" tab-insert +"M-C-J" vi-editing-mode +"M-C-M" vi-editing-mode +"M-C-R" revert-line +"M-C-Y" yank-nth-arg +"M-C-[" complete +"M-C-]" character-search-backward +"M-space" set-mark +"M-#" insert-comment +"M-&" tilde-expand +"M-*" insert-completions +"M--" digit-argument +"M-." yank-last-arg +"M-0" digit-argument +"M-1" digit-argument +"M-2" digit-argument +"M-3" digit-argument +"M-4" digit-argument +"M-5" digit-argument +"M-6" digit-argument +"M-7" digit-argument +"M-8" digit-argument +"M-9" digit-argument +"M-<" beginning-of-history +"M-=" possible-completions +"M->" end-of-history +"M-?" possible-completions +"M-B" backward-word +"M-C" capitalize-word +"M-D" kill-word +"M-F" forward-word +"M-L" downcase-word +"M-N" non-incremental-forward-search-history +"M-P" non-incremental-reverse-search-history +"M-R" revert-line +"M-T" transpose-words +"M-U" upcase-word +"M-Y" yank-pop +"M-\e" delete-horizontal-space +"M-~" tilde-expand +"M-C-?" backward-delete-word +"M-_" yank-last-arg +.PP +Emacs Control-X bindings +.sp +"C-XC-G" abort +"C-XC-R" re-read-init-file +"C-XC-U" undo +"C-XC-X" exchange-point-and-mark +"C-X(" start-kbd-macro +"C-X)" end-kbd-macro +"C-XE" call-last-kbd-macro +"C-XC-?" backward-kill-line +.sp +.RE +.SS VI Mode bindings +.RS +.6i +.nf +.ta 2.5i +.sp +.PP +VI Insert Mode functions +.sp +"C-D" vi-eof-maybe +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-M" accept-line +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-[" vi-movement-mode +"C-_" undo +"\^ " to "~" self-insert +"C-?" backward-delete-char +.PP +VI Command Mode functions +.sp +"C-D" vi-eof-maybe +"C-E" emacs-editing-mode +"C-G" abort +"C-H" backward-char +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"\^ " forward-char +"#" insert-comment +"$" end-of-line +"%" vi-match +"&" vi-tilde-expand +"*" vi-complete +"+" next-history +"," vi-char-search +"-" previous-history +"." vi-redo +"/" vi-search +"0" beginning-of-line +"1" to "9" vi-arg-digit +";" vi-char-search +"=" vi-complete +"?" vi-search +"A" vi-append-eol +"B" vi-prev-word +"C" vi-change-to +"D" vi-delete-to +"E" vi-end-word +"F" vi-char-search +"G" vi-fetch-history +"I" vi-insert-beg +"N" vi-search-again +"P" vi-put +"R" vi-replace +"S" vi-subst +"T" vi-char-search +"U" revert-line +"W" vi-next-word +"X" backward-delete-char +"Y" vi-yank-to +"\e" vi-complete +"^" vi-first-print +"_" vi-yank-arg +"`" vi-goto-mark +"a" vi-append-mode +"b" vi-prev-word +"c" vi-change-to +"d" vi-delete-to +"e" vi-end-word +"f" vi-char-search +"h" backward-char +"i" vi-insertion-mode +"j" next-history +"k" prev-history +"l" forward-char +"m" vi-set-mark +"n" vi-search-again +"p" vi-put +"r" vi-change-char +"s" vi-subst +"t" vi-char-search +"u" undo +"w" vi-next-word +"x" vi-delete +"y" vi-yank-to +"|" vi-column +"~" vi-change-case +.RE +.SH "SEE ALSO" +.PD 0 +.TP +\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey +.TP +\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey +.TP +\fIbash\fP(1) +.PD +.SH FILES +.PD 0 +.TP +.FN ~/.inputrc +Individual \fBreadline\fP initialization file +.PD +.SH AUTHORS +Brian Fox, Free Software Foundation (primary author) +.br +bfox@ai.MIT.Edu +.PP +Chet Ramey, Case Western Reserve University +.br +chet@ins.CWRU.Edu +.SH BUG REPORTS +If you find a bug in +.B readline, +you should report it. But first, you should +make sure that it really is a bug, and that it appears in the latest +version of the +.B readline +library that you have. +.PP +Once you have determined that a bug actually exists, mail a +bug report to \fIbug\-readline\fP@\fIgnu.org\fP. +If you have a fix, you are welcome to mail that +as well! Suggestions and `philosophical' bug reports may be mailed +to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet +newsgroup +.BR gnu.bash.bug . +.PP +Comments and bug reports concerning +this manual page should be directed to +.IR chet@ins.CWRU.Edu . +.SH BUGS +.PP +It's too big and too slow. diff --git a/readline/doc/rlman.texinfo b/readline/doc/rlman.texinfo new file mode 100644 index 00000000000..dd6478af5a2 --- /dev/null +++ b/readline/doc/rlman.texinfo @@ -0,0 +1,115 @@ +\input texinfo @c -*-texinfo-*- +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename readline.info +@settitle GNU Readline Library +@comment %**end of header (This is for running Texinfo on a region.) +@synindex vr fn +@setchapternewpage odd + +@ignore +last change: Thu Apr 2 14:39:03 EST 1998 +@end ignore + +@set EDITION 2.2 +@set VERSION 2.2 +@set UPDATED 2 April 1998 +@set UPDATE-MONTH April 1998 + +@dircategory Libraries +@direntry +* Readline: (readline). The GNU readline library API +@end direntry + +@ifinfo +This document describes the GNU Readline Library, a utility which aids +in the consistency of user interface across discrete programs that need +to provide a command line interface. + +Copyright (C) 1988, 1991, 1993, 1996, 1998 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +pare preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ifinfo + +@titlepage +@title GNU Readline Library +@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}. +@subtitle @value{UPDATE-MONTH} +@author Brian Fox, Free Software Foundation +@author Chet Ramey, Case Western Reserve University + +@page +This document describes the GNU Readline Library, a utility which aids +in the consistency of user interface across discrete programs that need +to provide a command line interface. + +Published by the Free Software Foundation @* +675 Massachusetts Avenue, @* +Cambridge, MA 02139 USA + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +are preserved on all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. + +@vskip 0pt plus 1filll +Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc. +@end titlepage + +@ifinfo +@node Top +@top GNU Readline Library + +This document describes the GNU Readline Library, a utility which aids +in the consistency of user interface across discrete programs that need +to provide a command line interface. + +@menu +* Command Line Editing:: GNU Readline User's Manual. +* Programming with GNU Readline:: GNU Readline Programmer's Manual. +* Concept Index:: Index of concepts described in this manual. +* Function and Variable Index:: Index of externally visible functions + and variables. +@end menu +@end ifinfo + +@include rluser.texinfo +@include rltech.texinfo + +@node Concept Index +@unnumbered Concept Index +@printindex cp + +@node Function and Variable Index +@unnumbered Function and Variable Index +@printindex fn + +@contents +@bye diff --git a/readline/doc/rltech.texinfo b/readline/doc/rltech.texinfo new file mode 100644 index 00000000000..bce508717ac --- /dev/null +++ b/readline/doc/rltech.texinfo @@ -0,0 +1,1548 @@ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rltech.info +@comment %**end of header (This is for running Texinfo on a region.) +@setchapternewpage odd + +@ifinfo +This document describes the GNU Readline Library, a utility for aiding +in the consitency of user interface across discrete programs that need +to provide a command line interface. + +Copyright (C) 1988, 1994, 1996 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +pare preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ifinfo + +@node Programming with GNU Readline +@chapter Programming with GNU Readline + +This chapter describes the interface between the GNU Readline Library and +other programs. If you are a programmer, and you wish to include the +features found in GNU Readline +such as completion, line editing, and interactive history manipulation +in your own programs, this section is for you. + +@menu +* Basic Behavior:: Using the default behavior of Readline. +* Custom Functions:: Adding your own functions to Readline. +* Readline Variables:: Variables accessible to custom + functions. +* Readline Convenience Functions:: Functions which Readline supplies to + aid in writing your own +* Custom Completers:: Supplanting or supplementing Readline's + completion functions. +@end menu + +@node Basic Behavior +@section Basic Behavior + +Many programs provide a command line interface, such as @code{mail}, +@code{ftp}, and @code{sh}. For such programs, the default behaviour of +Readline is sufficient. This section describes how to use Readline in +the simplest way possible, perhaps to replace calls in your code to +@code{gets()} or @code{fgets ()}. + +@findex readline +@cindex readline, function +The function @code{readline ()} prints a prompt and then reads and returns +a single line of text from the user. The line @code{readline} +returns is allocated with @code{malloc ()}; you should @code{free ()} +the line when you are done with it. The declaration for @code{readline} +in ANSI C is + +@example +@code{char *readline (char *@var{prompt});} +@end example + +@noindent +So, one might say +@example +@code{char *line = readline ("Enter a line: ");} +@end example +@noindent +in order to read a line of text from the user. +The line returned has the final newline removed, so only the +text remains. + +If @code{readline} encounters an @code{EOF} while reading the line, and the +line is empty at that point, then @code{(char *)NULL} is returned. +Otherwise, the line is ended just as if a newline had been typed. + +If you want the user to be able to get at the line later, (with +@key{C-p} for example), you must call @code{add_history ()} to save the +line away in a @dfn{history} list of such lines. + +@example +@code{add_history (line)}; +@end example + +@noindent +For full details on the GNU History Library, see the associated manual. + +It is preferable to avoid saving empty lines on the history list, since +users rarely have a burning need to reuse a blank line. Here is +a function which usefully replaces the standard @code{gets ()} library +function, and has the advantage of no static buffer to overflow: + +@example +/* A static variable for holding the line. */ +static char *line_read = (char *)NULL; + +/* Read a string, and return a pointer to it. Returns NULL on EOF. */ +char * +rl_gets () +@{ + /* If the buffer has already been allocated, return the memory + to the free pool. */ + if (line_read) + @{ + free (line_read); + line_read = (char *)NULL; + @} + + /* Get a line from the user. */ + line_read = readline (""); + + /* If the line has any text in it, save it on the history. */ + if (line_read && *line_read) + add_history (line_read); + + return (line_read); +@} +@end example + +This function gives the user the default behaviour of @key{TAB} +completion: completion on file names. If you do not want Readline to +complete on filenames, you can change the binding of the @key{TAB} key +with @code{rl_bind_key ()}. + +@example +@code{int rl_bind_key (int @var{key}, int (*@var{function})());} +@end example + +@code{rl_bind_key ()} takes two arguments: @var{key} is the character that +you want to bind, and @var{function} is the address of the function to +call when @var{key} is pressed. Binding @key{TAB} to @code{rl_insert ()} +makes @key{TAB} insert itself. +@code{rl_bind_key ()} returns non-zero if @var{key} is not a valid +ASCII character code (between 0 and 255). + +Thus, to disable the default @key{TAB} behavior, the following suffices: +@example +@code{rl_bind_key ('\t', rl_insert);} +@end example + +This code should be executed once at the start of your program; you +might write a function called @code{initialize_readline ()} which +performs this and other desired initializations, such as installing +custom completers (@pxref{Custom Completers}). + +@node Custom Functions +@section Custom Functions + +Readline provides many functions for manipulating the text of +the line, but it isn't possible to anticipate the needs of all +programs. This section describes the various functions and variables +defined within the Readline library which allow a user program to add +customized functionality to Readline. + +@menu +* The Function Type:: C declarations to make code readable. +* Function Writing:: Variables and calling conventions. +@end menu + +@node The Function Type +@subsection The Function Type + +For readabilty, we declare a new type of object, called +@dfn{Function}. A @code{Function} is a C function which +returns an @code{int}. The type declaration for @code{Function} is: + +@noindent +@code{typedef int Function ();} + +The reason for declaring this new type is to make it easier to write +code describing pointers to C functions. Let us say we had a variable +called @var{func} which was a pointer to a function. Instead of the +classic C declaration + +@code{int (*)()func;} + +@noindent +we may write + +@code{Function *func;} + +@noindent +Similarly, there are + +@example +typedef void VFunction (); +typedef char *CPFunction (); @r{and} +typedef char **CPPFunction (); +@end example + +@noindent +for functions returning no value, @code{pointer to char}, and +@code{pointer to pointer to char}, respectively. + +@node Function Writing +@subsection Writing a New Function + +In order to write new functions for Readline, you need to know the +calling conventions for keyboard-invoked functions, and the names of the +variables that describe the current state of the line read so far. + +The calling sequence for a command @code{foo} looks like + +@example +@code{foo (int count, int key)} +@end example + +@noindent +where @var{count} is the numeric argument (or 1 if defaulted) and +@var{key} is the key that invoked this function. + +It is completely up to the function as to what should be done with the +numeric argument. Some functions use it as a repeat count, some +as a flag, and others to choose alternate behavior (refreshing the current +line as opposed to refreshing the screen, for example). Some choose to +ignore it. In general, if a +function uses the numeric argument as a repeat count, it should be able +to do something useful with both negative and positive arguments. +At the very least, it should be aware that it can be passed a +negative argument. + +@node Readline Variables +@section Readline Variables + +These variables are available to function writers. + +@deftypevar {char *} rl_line_buffer +This is the line gathered so far. You are welcome to modify the +contents of the line, but see @ref{Allowing Undoing}. +@end deftypevar + +@deftypevar int rl_point +The offset of the current cursor position in @code{rl_line_buffer} +(the @emph{point}). +@end deftypevar + +@deftypevar int rl_end +The number of characters present in @code{rl_line_buffer}. When +@code{rl_point} is at the end of the line, @code{rl_point} and +@code{rl_end} are equal. +@end deftypevar + +@deftypevar int rl_mark +The mark (saved position) in the current line. If set, the mark +and point define a @emph{region}. +@end deftypevar + +@deftypevar int rl_done +Setting this to a non-zero value causes Readline to return the current +line immediately. +@end deftypevar + +@deftypevar int rl_pending_input +Setting this to a value makes it the next keystroke read. This is a +way to stuff a single character into the input stream. +@end deftypevar + +@deftypevar {char *} rl_prompt +The prompt Readline uses. This is set from the argument to +@code{readline ()}, and should not be assigned to directly. +@end deftypevar + +@deftypevar {char *} rl_library_version +The version number of this revision of the library. +@end deftypevar + +@deftypevar {char *} rl_terminal_name +The terminal type, used for initialization. +@end deftypevar + +@deftypevar {char *} rl_readline_name +This variable is set to a unique name by each application using Readline. +The value allows conditional parsing of the inputrc file +(@pxref{Conditional Init Constructs}). +@end deftypevar + +@deftypevar {FILE *} rl_instream +The stdio stream from which Readline reads input. +@end deftypevar + +@deftypevar {FILE *} rl_outstream +The stdio stream to which Readline performs output. +@end deftypevar + +@deftypevar {Function *} rl_startup_hook +If non-zero, this is the address of a function to call just +before @code{readline} prints the first prompt. +@end deftypevar + +@deftypevar {Function *} rl_event_hook +If non-zero, this is the address of a function to call periodically +when readline is waiting for terminal input. +@end deftypevar + +@deftypevar {Function *} rl_getc_function +If non-zero, @code{readline} will call indirectly through this pointer +to get a character from the input stream. By default, it is set to +@code{rl_getc}, the default @code{readline} character input function +(@pxref{Utility Functions}). +@end deftypevar + +@deftypevar {VFunction *} rl_redisplay_function +If non-zero, @code{readline} will call indirectly through this pointer +to update the display with the current contents of the editing buffer. +By default, it is set to @code{rl_redisplay}, the default @code{readline} +redisplay function (@pxref{Redisplay}). +@end deftypevar + +@deftypevar {Keymap} rl_executing_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +currently executing readline function was found. +@end deftypevar + +@deftypevar {Keymap} rl_binding_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +last key binding occurred. +@end deftypevar + +@node Readline Convenience Functions +@section Readline Convenience Functions + +@menu +* Function Naming:: How to give a function you write a name. +* Keymaps:: Making keymaps. +* Binding Keys:: Changing Keymaps. +* Associating Function Names and Bindings:: Translate function names to + key sequences. +* Allowing Undoing:: How to make your functions undoable. +* Redisplay:: Functions to control line display. +* Modifying Text:: Functions to modify @code{rl_line_buffer}. +* Utility Functions:: Generally useful functions and hooks. +* Alternate Interface:: Using Readline in a `callback' fashion. +@end menu + +@node Function Naming +@subsection Naming a Function + +The user can dynamically change the bindings of keys while using +Readline. This is done by representing the function with a descriptive +name. The user is able to type the descriptive name when referring to +the function. Thus, in an init file, one might find + +@example +Meta-Rubout: backward-kill-word +@end example + +This binds the keystroke @key{Meta-Rubout} to the function +@emph{descriptively} named @code{backward-kill-word}. You, as the +programmer, should bind the functions you write to descriptive names as +well. Readline provides a function for doing that: + +@deftypefun int rl_add_defun (char *name, Function *function, int key) +Add @var{name} to the list of named functions. Make @var{function} be +the function that gets called. If @var{key} is not -1, then bind it to +@var{function} using @code{rl_bind_key ()}. +@end deftypefun + +Using this function alone is sufficient for most applications. It is +the recommended way to add a few functions to the default functions that +Readline has built in. If you need to do something other +than adding a function to Readline, you may need to use the +underlying functions described below. + +@node Keymaps +@subsection Selecting a Keymap + +Key bindings take place on a @dfn{keymap}. The keymap is the +association between the keys that the user types and the functions that +get run. You can make your own keymaps, copy existing keymaps, and tell +Readline which keymap to use. + +@deftypefun Keymap rl_make_bare_keymap () +Returns a new, empty keymap. The space for the keymap is allocated with +@code{malloc ()}; you should @code{free ()} it when you are done. +@end deftypefun + +@deftypefun Keymap rl_copy_keymap (Keymap map) +Return a new keymap which is a copy of @var{map}. +@end deftypefun + +@deftypefun Keymap rl_make_keymap () +Return a new keymap with the printing characters bound to rl_insert, +the lowercase Meta characters bound to run their equivalents, and +the Meta digits bound to produce numeric arguments. +@end deftypefun + +@deftypefun void rl_discard_keymap (Keymap keymap) +Free the storage associated with @var{keymap}. +@end deftypefun + +Readline has several internal keymaps. These functions allow you to +change which keymap is active. + +@deftypefun Keymap rl_get_keymap () +Returns the currently active keymap. +@end deftypefun + +@deftypefun void rl_set_keymap (Keymap keymap) +Makes @var{keymap} the currently active keymap. +@end deftypefun + +@deftypefun Keymap rl_get_keymap_by_name (char *name) +Return the keymap matching @var{name}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@deftypefun {char *} rl_get_keymap_name (Keymap keymap) +Return the name matching @var{keymap}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@node Binding Keys +@subsection Binding Keys + +You associate keys with functions through the keymap. Readline has +several internal keymaps: @code{emacs_standard_keymap}, +@code{emacs_meta_keymap}, @code{emacs_ctlx_keymap}, +@code{vi_movement_keymap}, and @code{vi_insertion_keymap}. +@code{emacs_standard_keymap} is the default, and the examples in +this manual assume that. + +These functions manage key bindings. + +@deftypefun int rl_bind_key (int key, Function *function) +Binds @var{key} to @var{function} in the currently active keymap. +Returns non-zero in the case of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_bind_key_in_map (int key, Function *function, Keymap map) +Bind @var{key} to @var{function} in @var{map}. Returns non-zero in the case +of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_unbind_key (int key) +Bind @var{key} to the null function in the currently active keymap. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_key_in_map (int key, Keymap map) +Bind @var{key} to the null function in @var{map}. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_function_in_map (Function *function, Keymap map) +Unbind all keys that execute @var{function} in @var{map}. +@end deftypefun + +@deftypefun int rl_unbind_command_in_map (char *command, Keymap map) +Unbind all keys that are bound to @var{command} in @var{map}. +@end deftypefun + +@deftypefun int rl_generic_bind (int type, char *keyseq, char *data, Keymap map) +Bind the key sequence represented by the string @var{keyseq} to the arbitrary +pointer @var{data}. @var{type} says what kind of data is pointed to by +@var{data}; this can be a function (@code{ISFUNC}), a macro +(@code{ISMACR}), or a keymap (@code{ISKMAP}). This makes new keymaps as +necessary. The initial keymap in which to do bindings is @var{map}. +@end deftypefun + +@deftypefun int rl_parse_and_bind (char *line) +Parse @var{line} as if it had been read from the @code{inputrc} file and +perform any key bindings and variable assignments found +(@pxref{Readline Init File}). +@end deftypefun + +@deftypefun int rl_read_init_file (char *filename) +Read keybindings and variable assignments from @var{filename} +(@pxref{Readline Init File}). +@end deftypefun + +@node Associating Function Names and Bindings +@subsection Associating Function Names and Bindings + +These functions allow you to find out what keys invoke named functions +and the functions invoked by a particular key sequence. + +@deftypefun {Function *} rl_named_function (char *name) +Return the function with name @var{name}. +@end deftypefun + +@deftypefun {Function *} rl_function_of_keyseq (char *keyseq, Keymap map, int *type) +Return the function invoked by @var{keyseq} in keymap @var{map}. +If @var{map} is NULL, the current keymap is used. If @var{type} is +not NULL, the type of the object is returned in it (one of @code{ISFUNC}, +@code{ISKMAP}, or @code{ISMACR}). +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs (Function *function) +Return an array of strings representing the key sequences used to +invoke @var{function} in the current keymap. +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs_in_map (Function *function, Keymap map) +Return an array of strings representing the key sequences used to +invoke @var{function} in the keymap @var{map}. +@end deftypefun + +@deftypefun void rl_function_dumper (int readable) +Print the readline function names and the key sequences currently +bound to them to @code{rl_outstream}. If @var{readable} is non-zero, +the list is formatted in such a way that it can be made part of an +@code{inputrc} file and re-read. +@end deftypefun + +@deftypefun void rl_list_funmap_names () +Print the names of all bindable Readline functions to @code{rl_outstream}. +@end deftypefun + +@node Allowing Undoing +@subsection Allowing Undoing + +Supporting the undo command is a painless thing, and makes your +functions much more useful. It is certainly easy to try +something if you know you can undo it. I could use an undo function for +the stock market. + +If your function simply inserts text once, or deletes text once, and +uses @code{rl_insert_text ()} or @code{rl_delete_text ()} to do it, then +undoing is already done for you automatically. + +If you do multiple insertions or multiple deletions, or any combination +of these operations, you should group them together into one operation. +This is done with @code{rl_begin_undo_group ()} and +@code{rl_end_undo_group ()}. + +The types of events that can be undone are: + +@example +enum undo_code @{ UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END @}; +@end example + +Notice that @code{UNDO_DELETE} means to insert some text, and +@code{UNDO_INSERT} means to delete some text. That is, the undo code +tells undo what to undo, not how to undo it. @code{UNDO_BEGIN} and +@code{UNDO_END} are tags added by @code{rl_begin_undo_group ()} and +@code{rl_end_undo_group ()}. + +@deftypefun int rl_begin_undo_group () +Begins saving undo information in a group construct. The undo +information usually comes from calls to @code{rl_insert_text ()} and +@code{rl_delete_text ()}, but could be the result of calls to +@code{rl_add_undo ()}. +@end deftypefun + +@deftypefun int rl_end_undo_group () +Closes the current undo group started with @code{rl_begin_undo_group +()}. There should be one call to @code{rl_end_undo_group ()} +for each call to @code{rl_begin_undo_group ()}. +@end deftypefun + +@deftypefun void rl_add_undo (enum undo_code what, int start, int end, char *text) +Remember how to undo an event (according to @var{what}). The affected +text runs from @var{start} to @var{end}, and encompasses @var{text}. +@end deftypefun + +@deftypefun void free_undo_list () +Free the existing undo list. +@end deftypefun + +@deftypefun int rl_do_undo () +Undo the first thing on the undo list. Returns @code{0} if there was +nothing to undo, non-zero if something was undone. +@end deftypefun + +Finally, if you neither insert nor delete text, but directly modify the +existing text (e.g., change its case), call @code{rl_modifying ()} +once, just before you modify the text. You must supply the indices of +the text range that you are going to modify. + +@deftypefun int rl_modifying (int start, int end) +Tell Readline to save the text between @var{start} and @var{end} as a +single undo unit. It is assumed that you will subsequently modify +that text. +@end deftypefun + +@node Redisplay +@subsection Redisplay + +@deftypefun void rl_redisplay () +Change what's displayed on the screen to reflect the current contents +of @code{rl_line_buffer}. +@end deftypefun + +@deftypefun int rl_forced_update_display () +Force the line to be updated and redisplayed, whether or not +Readline thinks the screen display is correct. +@end deftypefun + +@deftypefun int rl_on_new_line () +Tell the update routines that we have moved onto a new (empty) line, +usually after ouputting a newline. +@end deftypefun + +@deftypefun int rl_reset_line_state () +Reset the display state to a clean state and redisplay the current line +starting on a new line. +@end deftypefun + +@deftypefun int rl_message (va_alist) +The arguments are a string as would be supplied to @code{printf}. The +resulting string is displayed in the @dfn{echo area}. The echo area +is also used to display numeric arguments and search strings. +@end deftypefun + +@deftypefun int rl_clear_message () +Clear the message in the echo area. +@end deftypefun + +@node Modifying Text +@subsection Modifying Text + +@deftypefun int rl_insert_text (char *text) +Insert @var{text} into the line at the current cursor position. +@end deftypefun + +@deftypefun int rl_delete_text (int start, int end) +Delete the text between @var{start} and @var{end} in the current line. +@end deftypefun + +@deftypefun {char *} rl_copy_text (int start, int end) +Return a copy of the text between @var{start} and @var{end} in +the current line. +@end deftypefun + +@deftypefun int rl_kill_text (int start, int end) +Copy the text between @var{start} and @var{end} in the current line +to the kill ring, appending or prepending to the last kill if the +last command was a kill command. The text is deleted. +If @var{start} is less than @var{end}, +the text is appended, otherwise prepended. If the last command was +not a kill, a new kill ring slot is used. +@end deftypefun + +@node Utility Functions +@subsection Utility Functions + +@deftypefun int rl_read_key () +Return the next character available. This handles input inserted into +the input stream via @var{pending input} (@pxref{Readline Variables}) +and @code{rl_stuff_char ()}, macros, and characters read from the keyboard. +@end deftypefun + +@deftypefun int rl_getc (FILE *) +Return the next character available from the keyboard. +@end deftypefun + +@deftypefun int rl_stuff_char (int c) +Insert @var{c} into the Readline input stream. It will be "read" +before Readline attempts to read characters from the terminal with +@code{rl_read_key ()}. +@end deftypefun + +@deftypefun rl_extend_line_buffer (int len) +Ensure that @code{rl_line_buffer} has enough space to hold @var{len} +characters, possibly reallocating it if necessary. +@end deftypefun + +@deftypefun int rl_initialize () +Initialize or re-initialize Readline's internal state. +@end deftypefun + +@deftypefun int rl_reset_terminal (char *terminal_name) +Reinitialize Readline's idea of the terminal settings using +@var{terminal_name} as the terminal type (e.g., @code{vt100}). +@end deftypefun + +@deftypefun int alphabetic (int c) +Return 1 if @var{c} is an alphabetic character. +@end deftypefun + +@deftypefun int numeric (int c) +Return 1 if @var{c} is a numeric character. +@end deftypefun + +@deftypefun int ding () +Ring the terminal bell, obeying the setting of @code{bell-style}. +@end deftypefun + +The following are implemented as macros, defined in @code{chartypes.h}. + +@deftypefun int uppercase_p (int c) +Return 1 if @var{c} is an uppercase alphabetic character. +@end deftypefun + +@deftypefun int lowercase_p (int c) +Return 1 if @var{c} is a lowercase alphabetic character. +@end deftypefun + +@deftypefun int digit_p (int c) +Return 1 if @var{c} is a numeric character. +@end deftypefun + +@deftypefun int to_upper (int c) +If @var{c} is a lowercase alphabetic character, return the corresponding +uppercase character. +@end deftypefun + +@deftypefun int to_lower (int c) +If @var{c} is an uppercase alphabetic character, return the corresponding +lowercase character. +@end deftypefun + +@deftypefun int digit_value (int c) +If @var{c} is a number, return the value it represents. +@end deftypefun + +@node Alternate Interface +@subsection Alternate Interface + +An alternate interface is available to plain @code{readline()}. Some +applications need to interleave keyboard I/O with file, device, or +window system I/O, typically by using a main loop to @code{select()} +on various file descriptors. To accomodate this need, readline can +also be invoked as a `callback' function from an event loop. There +are functions available to make this easy. + +@deftypefun void rl_callback_handler_install (char *prompt, Vfunction *lhandler) +Set up the terminal for readline I/O and display the initial +expanded value of @var{prompt}. Save the value of @var{lhandler} to +use as a callback when a complete line of input has been entered. +@end deftypefun + +@deftypefun void rl_callback_read_char () +Whenever an application determines that keyboard input is available, it +should call @code{rl_callback_read_char()}, which will read the next +character from the current input source. If that character completes the +line, @code{rl_callback_read_char} will invoke the @var{lhandler} +function saved by @code{rl_callback_handler_install} to process the +line. @code{EOF} is indicated by calling @var{lhandler} with a +@code{NULL} line. +@end deftypefun + +@deftypefun void rl_callback_handler_remove () +Restore the terminal to its initial state and remove the line handler. +This may be called from within a callback as well as independently. +@end deftypefun + +@subsection An Example + +Here is a function which changes lowercase characters to their uppercase +equivalents, and uppercase characters to lowercase. If +this function was bound to @samp{M-c}, then typing @samp{M-c} would +change the case of the character under point. Typing @samp{M-1 0 M-c} +would change the case of the following 10 characters, leaving the cursor on +the last character changed. + +@example +/* Invert the case of the COUNT following characters. */ +int +invert_case_line (count, key) + int count, key; +@{ + register int start, end, i; + + start = rl_point; + + if (rl_point >= rl_end) + return (0); + + if (count < 0) + @{ + direction = -1; + count = -count; + @} + else + direction = 1; + + /* Find the end of the range to modify. */ + end = start + (count * direction); + + /* Force it to be within range. */ + if (end > rl_end) + end = rl_end; + else if (end < 0) + end = 0; + + if (start == end) + return (0); + + if (start > end) + @{ + int temp = start; + start = end; + end = temp; + @} + + /* Tell readline that we are modifying the line, so it will save + the undo information. */ + rl_modifying (start, end); + + for (i = start; i != end; i++) + @{ + if (uppercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = to_lower (rl_line_buffer[i]); + else if (lowercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = to_upper (rl_line_buffer[i]); + @} + /* Move point to on top of the last character changed. */ + rl_point = (direction == 1) ? end - 1 : start; + return (0); +@} +@end example + +@node Custom Completers +@section Custom Completers + +Typically, a program that reads commands from the user has a way of +disambiguating commands and data. If your program is one of these, then +it can provide completion for commands, data, or both. +The following sections describe how your program and Readline +cooperate to provide this service. + +@menu +* How Completing Works:: The logic used to do completion. +* Completion Functions:: Functions provided by Readline. +* Completion Variables:: Variables which control completion. +* A Short Completion Example:: An example of writing completer subroutines. +@end menu + +@node How Completing Works +@subsection How Completing Works + +In order to complete some text, the full list of possible completions +must be available. That is, it is not possible to accurately +expand a partial word without knowing all of the possible words +which make sense in that context. The Readline library provides +the user interface to completion, and two of the most common +completion functions: filename and username. For completing other types +of text, you must write your own completion function. This section +describes exactly what such functions must do, and provides an example. + +There are three major functions used to perform completion: + +@enumerate +@item +The user-interface function @code{rl_complete ()}. This function is +called with the same arguments as other Readline +functions intended for interactive use: @var{count} and +@var{invoking_key}. It isolates the word to be completed and calls +@code{completion_matches ()} to generate a list of possible completions. +It then either lists the possible completions, inserts the possible +completions, or actually performs the +completion, depending on which behavior is desired. + +@item +The internal function @code{completion_matches ()} uses your +@dfn{generator} function to generate the list of possible matches, and +then returns the array of these matches. You should place the address +of your generator function in @code{rl_completion_entry_function}. + +@item +The generator function is called repeatedly from +@code{completion_matches ()}, returning a string each time. The +arguments to the generator function are @var{text} and @var{state}. +@var{text} is the partial word to be completed. @var{state} is zero the +first time the function is called, allowing the generator to perform +any necessary initialization, and a positive non-zero integer for +each subsequent call. When the generator function returns +@code{(char *)NULL} this signals @code{completion_matches ()} that there are +no more possibilities left. Usually the generator function computes the +list of possible completions when @var{state} is zero, and returns them +one at a time on subsequent calls. Each string the generator function +returns as a match must be allocated with @code{malloc()}; Readline +frees the strings when it has finished with them. + +@end enumerate + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{completion_matches ()}). The default is to do filename completion. +@end deftypefun + +@deftypevar {Function *} rl_completion_entry_function +This is a pointer to the generator function for @code{completion_matches +()}. If the value of @code{rl_completion_entry_function} is +@code{(Function *)NULL} then the default filename generator function, +@code{filename_completion_function ()}, is used. +@end deftypevar + +@node Completion Functions +@subsection Completion Functions + +Here is the complete list of callable completion functions present in +Readline. + +@deftypefun int rl_complete_internal (int what_to_do) +Complete the word at or before point. @var{what_to_do} says what to do +with the completion. A value of @samp{?} means list the possible +completions. @samp{TAB} means do standard completion. @samp{*} means +insert all of the possible completions. @samp{!} means to display +all of the possible completions, if there is more than one, as well as +performing partial completion. +@end deftypefun + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{completion_matches ()} and @code{rl_completion_entry_function}). +The default is to do filename +completion. This calls @code{rl_complete_internal ()} with an +argument depending on @var{invoking_key}. +@end deftypefun + +@deftypefun int rl_possible_completions (int count, int invoking_key)) +List the possible completions. See description of @code{rl_complete +()}. This calls @code{rl_complete_internal ()} with an argument of +@samp{?}. +@end deftypefun + +@deftypefun int rl_insert_completions (int count, int invoking_key)) +Insert the list of possible completions into the line, deleting the +partially-completed word. See description of @code{rl_complete ()}. +This calls @code{rl_complete_internal ()} with an argument of @samp{*}. +@end deftypefun + +@deftypefun {char **} completion_matches (char *text, CPFunction *entry_func) +Returns an array of @code{(char *)} which is a list of completions for +@var{text}. If there are no completions, returns @code{(char **)NULL}. +The first entry in the returned array is the substitution for @var{text}. +The remaining entries are the possible completions. The array is +terminated with a @code{NULL} pointer. + +@var{entry_func} is a function of two args, and returns a +@code{(char *)}. The first argument is @var{text}. The second is a +state argument; it is zero on the first call, and non-zero on subsequent +calls. @var{entry_func} returns a @code{NULL} pointer to the caller +when there are no more matches. +@end deftypefun + +@deftypefun {char *} filename_completion_function (char *text, int state) +A generator function for filename completion in the general case. Note +that completion in Bash is a little different because of all +the pathnames that must be followed when looking up completions for a +command. The Bash source is a useful reference for writing custom +completion functions. +@end deftypefun + +@deftypefun {char *} username_completion_function (char *text, int state) +A completion generator for usernames. @var{text} contains a partial +username preceded by a random character (usually @samp{~}). As with all +completion generators, @var{state} is zero on the first call and non-zero +for subsequent calls. +@end deftypefun + +@node Completion Variables +@subsection Completion Variables + +@deftypevar {Function *} rl_completion_entry_function +A pointer to the generator function for @code{completion_matches ()}. +@code{NULL} means to use @code{filename_entry_function ()}, the default +filename completer. +@end deftypevar + +@deftypevar {CPPFunction *} rl_attempted_completion_function +A pointer to an alternative function to create matches. +The function is called with @var{text}, @var{start}, and @var{end}. +@var{start} and @var{end} are indices in @code{rl_line_buffer} saying +what the boundaries of @var{text} are. If this function exists and +returns @code{NULL}, or if this variable is set to @code{NULL}, then +@code{rl_complete ()} will call the value of +@code{rl_completion_entry_function} to generate matches, otherwise the +array of strings returned will be used. +@end deftypevar + +@deftypevar {CPFunction *} rl_filename_quoting_function +A pointer to a function that will quote a filename in an application- +specific fashion. This is called if filename completion is being +attempted and one of the characters in @code{rl_filename_quote_characters} +appears in a completed filename. The function is called with +@var{text}, @var{match_type}, and @var{quote_pointer}. The @var{text} +is the filename to be quoted. The @var{match_type} is either +@code{SINGLE_MATCH}, if there is only one completion match, or +@code{MULT_MATCH}. Some functions use this to decide whether or not to +insert a closing quote character. The @var{quote_pointer} is a pointer +to any opening quote character the user typed. Some functions choose +to reset this character. +@end deftypevar + +@deftypevar {CPFunction *} rl_filename_dequoting_function +A pointer to a function that will remove application-specific quoting +characters from a filename before completion is attempted, so those +characters do not interfere with matching the text against names in +the filesystem. It is called with @var{text}, the text of the word +to be dequoted, and @var{quote_char}, which is the quoting character +that delimits the filename (usually @samp{'} or @samp{"}). If +@var{quote_char} is zero, the filename was not in an embedded string. +@end deftypevar + +@deftypevar {Function *} rl_char_is_quoted_p +A pointer to a function to call that determines whether or not a specific +character in the line buffer is quoted, according to whatever quoting +mechanism the program calling readline uses. The function is called with +two arguments: @var{text}, the text of the line, and @var{index}, the +index of the character in the line. It is used to decide whether a +character found in @code{rl_completer_word_break_characters} should be +used to break words for the completer. +@end deftypevar + +@deftypevar int rl_completion_query_items +Up to this many items will be displayed in response to a +possible-completions call. After that, we ask the user if she is sure +she wants to see them all. The default value is 100. +@end deftypevar + +@deftypevar {char *} rl_basic_word_break_characters +The basic list of characters that signal a break between words for the +completer routine. The default value of this variable is the characters +which break words for completion in Bash, i.e., +@code{" \t\n\"\\'`@@$><=;|&@{("}. +@end deftypevar + +@deftypevar {char *} rl_basic_quote_characters +List of quote characters which can cause a word break. +@end deftypevar + +@deftypevar {char *} rl_completer_word_break_characters +The list of characters that signal a break between words for +@code{rl_complete_internal ()}. The default list is the value of +@code{rl_basic_word_break_characters}. +@end deftypevar + +@deftypevar {char *} rl_completer_quote_characters +List of characters which can be used to quote a substring of the line. +Completion occurs on the entire substring, and within the substring +@code{rl_completer_word_break_characters} are treated as any other character, +unless they also appear within this list. +@end deftypevar + +@deftypevar {char *} rl_filename_quote_characters +A list of characters that cause a filename to be quoted by the completer +when they appear in a completed filename. The default is the null string. +@end deftypevar + +@deftypevar {char *} rl_special_prefixes +The list of characters that are word break characters, but should be +left in @var{text} when it is passed to the completion function. +Programs can use this to help determine what kind of completing to do. +For instance, Bash sets this variable to "$@@" so that it can complete +shell variables and hostnames. +@end deftypevar + +@deftypevar {int} rl_completion_append_character +When a single completion alternative matches at the end of the command +line, this character is appended to the inserted completion text. The +default is a space character (@samp{ }). Setting this to the null +character (@samp{\0}) prevents anything being appended automatically. +This can be changed in custom completion functions to +provide the ``most sensible word separator character'' according to +an application-specific command line syntax specification. +@end deftypevar + +@deftypevar int rl_ignore_completion_duplicates +If non-zero, then disallow duplicates in the matches. Default is 1. +@end deftypevar + +@deftypevar int rl_filename_completion_desired +Non-zero means that the results of the matches are to be treated as +filenames. This is @emph{always} zero on entry, and can only be changed +within a completion entry generator function. If it is set to a non-zero +value, directory names have a slash appended and Readline attempts to +quote completed filenames if they contain any embedded word break +characters. +@end deftypevar + +@deftypevar int rl_filename_quoting_desired +Non-zero means that the results of the matches are to be quoted using +double quotes (or an application-specific quoting mechanism) if the +completed filename contains any characters in +@code{rl_filename_quote_chars}. This is @emph{always} non-zero +on entry, and can only be changed within a completion entry generator +function. The quoting is effected via a call to the function pointed to +by @code{rl_filename_quoting_function}. +@end deftypevar + +@deftypevar int rl_inhibit_completion +If this variable is non-zero, completion is inhibit<ed. The completion +character will be inserted as any other bound to @code{self-insert}. +@end deftypevar + +@deftypevar {Function *} rl_ignore_some_completions_function +This function, if defined, is called by the completer when real filename +completion is done, after all the matching names have been generated. +It is passed a @code{NULL} terminated array of matches. +The first element (@code{matches[0]}) is the +maximal substring common to all matches. This function can +re-arrange the list of matches as required, but each element deleted +from the array must be freed. +@end deftypevar + +@deftypevar {Function *} rl_directory_completion_hook +This function, if defined, is allowed to modify the directory portion +of filenames Readline completes. It is called with the address of a +string (the current directory name) as an argument. It could be used +to expand symbolic links or shell variables in pathnames. +@end deftypevar + +@node A Short Completion Example +@subsection A Short Completion Example + +Here is a small application demonstrating the use of the GNU Readline +library. It is called @code{fileman}, and the source code resides in +@file{examples/fileman.c}. This sample application provides +completion of command names, line editing features, and access to the +history list. + +@page +@smallexample +/* fileman.c -- A tiny application which demonstrates how to use the + GNU Readline library. This application interactively allows users + to manipulate files and their modes. */ + +#include <stdio.h> +#include <sys/types.h> +#include <sys/file.h> +#include <sys/stat.h> +#include <sys/errno.h> + +#include <readline/readline.h> +#include <readline/history.h> + +extern char *getwd (); +extern char *xmalloc (); + +/* The names of functions that actually do the manipulation. */ +int com_list (), com_view (), com_rename (), com_stat (), com_pwd (); +int com_delete (), com_help (), com_cd (), com_quit (); + +/* A structure which contains information on the commands this program + can understand. */ + +typedef struct @{ + char *name; /* User printable name of the function. */ + Function *func; /* Function to call to do the job. */ + char *doc; /* Documentation for this function. */ +@} COMMAND; + +COMMAND commands[] = @{ + @{ "cd", com_cd, "Change to directory DIR" @}, + @{ "delete", com_delete, "Delete FILE" @}, + @{ "help", com_help, "Display this text" @}, + @{ "?", com_help, "Synonym for `help'" @}, + @{ "list", com_list, "List files in DIR" @}, + @{ "ls", com_list, "Synonym for `list'" @}, + @{ "pwd", com_pwd, "Print the current working directory" @}, + @{ "quit", com_quit, "Quit using Fileman" @}, + @{ "rename", com_rename, "Rename FILE to NEWNAME" @}, + @{ "stat", com_stat, "Print out statistics on FILE" @}, + @{ "view", com_view, "View the contents of FILE" @}, + @{ (char *)NULL, (Function *)NULL, (char *)NULL @} +@}; + +/* Forward declarations. */ +char *stripwhite (); +COMMAND *find_command (); + +/* The name of this program, as taken from argv[0]. */ +char *progname; + +/* When non-zero, this global means the user is done using this program. */ +int done; + +char * +dupstr (s) + int s; +@{ + char *r; + + r = xmalloc (strlen (s) + 1); + strcpy (r, s); + return (r); +@} + +main (argc, argv) + int argc; + char **argv; +@{ + char *line, *s; + + progname = argv[0]; + + initialize_readline (); /* Bind our completer. */ + + /* Loop reading and executing lines until the user quits. */ + for ( ; done == 0; ) + @{ + line = readline ("FileMan: "); + + if (!line) + break; + + /* Remove leading and trailing whitespace from the line. + Then, if there is anything left, add it to the history list + and execute it. */ + s = stripwhite (line); + + if (*s) + @{ + add_history (s); + execute_line (s); + @} + + free (line); + @} + exit (0); +@} + +/* Execute a command line. */ +int +execute_line (line) + char *line; +@{ + register int i; + COMMAND *command; + char *word; + + /* Isolate the command word. */ + i = 0; + while (line[i] && whitespace (line[i])) + i++; + word = line + i; + + while (line[i] && !whitespace (line[i])) + i++; + + if (line[i]) + line[i++] = '\0'; + + command = find_command (word); + + if (!command) + @{ + fprintf (stderr, "%s: No such command for FileMan.\n", word); + return (-1); + @} + + /* Get argument to command, if any. */ + while (whitespace (line[i])) + i++; + + word = line + i; + + /* Call the function. */ + return ((*(command->func)) (word)); +@} + +/* Look up NAME as the name of a command, and return a pointer to that + command. Return a NULL pointer if NAME isn't a command name. */ +COMMAND * +find_command (name) + char *name; +@{ + register int i; + + for (i = 0; commands[i].name; i++) + if (strcmp (name, commands[i].name) == 0) + return (&commands[i]); + + return ((COMMAND *)NULL); +@} + +/* Strip whitespace from the start and end of STRING. Return a pointer + into STRING. */ +char * +stripwhite (string) + char *string; +@{ + register char *s, *t; + + for (s = string; whitespace (*s); s++) + ; + + if (*s == 0) + return (s); + + t = s + strlen (s) - 1; + while (t > s && whitespace (*t)) + t--; + *++t = '\0'; + + return s; +@} + +/* **************************************************************** */ +/* */ +/* Interface to Readline Completion */ +/* */ +/* **************************************************************** */ + +char *command_generator (); +char **fileman_completion (); + +/* Tell the GNU Readline library how to complete. We want to try to complete + on command names if this is the first word in the line, or on filenames + if not. */ +initialize_readline () +@{ + /* Allow conditional parsing of the ~/.inputrc file. */ + rl_readline_name = "FileMan"; + + /* Tell the completer that we want a crack first. */ + rl_attempted_completion_function = (CPPFunction *)fileman_completion; +@} + +/* Attempt to complete on the contents of TEXT. START and END bound the + region of rl_line_buffer that contains the word to complete. TEXT is + the word to complete. We can use the entire contents of rl_line_buffer + in case we want to do some simple parsing. Return the array of matches, + or NULL if there aren't any. */ +char ** +fileman_completion (text, start, end) + char *text; + int start, end; +@{ + char **matches; + + matches = (char **)NULL; + + /* If this word is at the start of the line, then it is a command + to complete. Otherwise it is the name of a file in the current + directory. */ + if (start == 0) + matches = completion_matches (text, command_generator); + + return (matches); +@} + +/* Generator function for command completion. STATE lets us know whether + to start from scratch; without any state (i.e. STATE == 0), then we + start at the top of the list. */ +char * +command_generator (text, state) + char *text; + int state; +@{ + static int list_index, len; + char *name; + + /* If this is a new word to complete, initialize now. This includes + saving the length of TEXT for efficiency, and initializing the index + variable to 0. */ + if (!state) + @{ + list_index = 0; + len = strlen (text); + @} + + /* Return the next name which partially matches from the command list. */ + while (name = commands[list_index].name) + @{ + list_index++; + + if (strncmp (name, text, len) == 0) + return (dupstr(name)); + @} + + /* If no names matched, then return NULL. */ + return ((char *)NULL); +@} + +/* **************************************************************** */ +/* */ +/* FileMan Commands */ +/* */ +/* **************************************************************** */ + +/* String to pass to system (). This is for the LIST, VIEW and RENAME + commands. */ +static char syscom[1024]; + +/* List the file(s) named in arg. */ +com_list (arg) + char *arg; +@{ + if (!arg) + arg = ""; + + sprintf (syscom, "ls -FClg %s", arg); + return (system (syscom)); +@} + +com_view (arg) + char *arg; +@{ + if (!valid_argument ("view", arg)) + return 1; + + sprintf (syscom, "more %s", arg); + return (system (syscom)); +@} + +com_rename (arg) + char *arg; +@{ + too_dangerous ("rename"); + return (1); +@} + +com_stat (arg) + char *arg; +@{ + struct stat finfo; + + if (!valid_argument ("stat", arg)) + return (1); + + if (stat (arg, &finfo) == -1) + @{ + perror (arg); + return (1); + @} + + printf ("Statistics for `%s':\n", arg); + + printf ("%s has %d link%s, and is %d byte%s in length.\n", arg, + finfo.st_nlink, + (finfo.st_nlink == 1) ? "" : "s", + finfo.st_size, + (finfo.st_size == 1) ? "" : "s"); + printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); + printf (" Last access at: %s", ctime (&finfo.st_atime)); + printf (" Last modified at: %s", ctime (&finfo.st_mtime)); + return (0); +@} + +com_delete (arg) + char *arg; +@{ + too_dangerous ("delete"); + return (1); +@} + +/* Print out help for ARG, or for all of the commands if ARG is + not present. */ +com_help (arg) + char *arg; +@{ + register int i; + int printed = 0; + + for (i = 0; commands[i].name; i++) + @{ + if (!*arg || (strcmp (arg, commands[i].name) == 0)) + @{ + printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); + printed++; + @} + @} + + if (!printed) + @{ + printf ("No commands match `%s'. Possibilties are:\n", arg); + + for (i = 0; commands[i].name; i++) + @{ + /* Print in six columns. */ + if (printed == 6) + @{ + printed = 0; + printf ("\n"); + @} + + printf ("%s\t", commands[i].name); + printed++; + @} + + if (printed) + printf ("\n"); + @} + return (0); +@} + +/* Change to the directory ARG. */ +com_cd (arg) + char *arg; +@{ + if (chdir (arg) == -1) + @{ + perror (arg); + return 1; + @} + + com_pwd (""); + return (0); +@} + +/* Print out the current working directory. */ +com_pwd (ignore) + char *ignore; +@{ + char dir[1024], *s; + + s = getwd (dir); + if (s == 0) + @{ + printf ("Error getting pwd: %s\n", dir); + return 1; + @} + + printf ("Current directory is %s\n", dir); + return 0; +@} + +/* The user wishes to quit using this program. Just set DONE non-zero. */ +com_quit (arg) + char *arg; +@{ + done = 1; + return (0); +@} + +/* Function which tells you that you can't do this. */ +too_dangerous (caller) + char *caller; +@{ + fprintf (stderr, + "%s: Too dangerous for me to distribute. Write it yourself.\n", + caller); +@} + +/* Return non-zero if ARG is a valid argument for CALLER, else print + an error message and return zero. */ +int +valid_argument (caller, arg) + char *caller, *arg; +@{ + if (!arg || !*arg) + @{ + fprintf (stderr, "%s: Argument required.\n", caller); + return (0); + @} + + return (1); +@} +@end smallexample diff --git a/readline/doc/rluser.texinfo b/readline/doc/rluser.texinfo new file mode 100644 index 00000000000..b2fd060366a --- /dev/null +++ b/readline/doc/rluser.texinfo @@ -0,0 +1,1261 @@ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rluser.info +@comment %**end of header (This is for running Texinfo on a region.) +@setchapternewpage odd + +@ignore +This file documents the end user interface to the GNU command line +editing features. It is to be an appendix to manuals for programs which +use these features. There is a document entitled "readline.texinfo" +which contains both end-user and programmer documentation for the GNU +Readline Library. + +Copyright (C) 1988, 1991, 1993, 1996 Free Software Foundation, Inc. + +Authored by Brian Fox and Chet Ramey. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@comment If you are including this manual as an appendix, then set the +@comment variable readline-appendix. + +@node Command Line Editing +@chapter Command Line Editing + +This chapter describes the basic features of the @sc{GNU} +command line editing interface. + +@menu +* Introduction and Notation:: Notation used in this text. +* Readline Interaction:: The minimum set of commands for editing a line. +* Readline Init File:: Customizing Readline from a user's view. +* Bindable Readline Commands:: A description of most of the Readline commands + available for binding +* Readline vi Mode:: A short description of how to make Readline + behave like the vi editor. +@end menu + +@node Introduction and Notation +@section Introduction to Line Editing + +The following paragraphs describe the notation used to represent +keystrokes. + +The text @key{C-k} is read as `Control-K' and describes the character +produced when the @key{k} key is pressed while the Control key +is depressed. + +The text @key{M-k} is read as `Meta-K' and describes the character +produced when the meta key (if you have one) is depressed, and the @key{k} +key is pressed. If you do not have a meta key, the identical keystroke +can be generated by typing @key{ESC} @i{first}, and then typing @key{k}. +Either process is known as @dfn{metafying} the @key{k} key. + +The text @key{M-C-k} is read as `Meta-Control-k' and describes the +character produced by @dfn{metafying} @key{C-k}. + +In addition, several keys have their own names. Specifically, +@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all +stand for themselves when seen in this text, or in an init file +(@pxref{Readline Init File}). + +@node Readline Interaction +@section Readline Interaction +@cindex interaction, readline + +Often during an interactive session you type in a long line of text, +only to notice that the first word on the line is misspelled. The +Readline library gives you a set of commands for manipulating the text +as you type it in, allowing you to just fix your typo, and not forcing +you to retype the majority of the line. Using these editing commands, +you move the cursor to the place that needs correction, and delete or +insert the text of the corrections. Then, when you are satisfied with +the line, you simply press @key{RETURN}. You do not have to be at the +end of the line to press @key{RETURN}; the entire line is accepted +regardless of the location of the cursor within the line. + +@menu +* Readline Bare Essentials:: The least you need to know about Readline. +* Readline Movement Commands:: Moving about the input line. +* Readline Killing Commands:: How to delete text, and how to get it back! +* Readline Arguments:: Giving numeric arguments to commands. +* Searching:: Searching through previous lines. + @end menu + +@node Readline Bare Essentials +@subsection Readline Bare Essentials +@cindex notation, readline +@cindex command editing +@cindex editing command lines + +In order to enter characters into the line, simply type them. The typed +character appears where the cursor was, and then the cursor moves one +space to the right. If you mistype a character, you can use your +erase character to back up and delete the mistyped character. + +Sometimes you may miss typing a character that you wanted to type, and +not notice your error until you have typed several other characters. In +that case, you can type @key{C-b} to move the cursor to the left, and then +correct your mistake. Afterwards, you can move the cursor to the right +with @key{C-f}. + +When you add text in the middle of a line, you will notice that characters +to the right of the cursor are `pushed over' to make room for the text +that you have inserted. Likewise, when you delete text behind the cursor, +characters to the right of the cursor are `pulled back' to fill in the +blank space created by the removal of the text. A list of the basic bare +essentials for editing the text of an input line follows. + +@table @asis +@item @key{C-b} +Move back one character. +@item @key{C-f} +Move forward one character. +@item @key{DEL} +Delete the character to the left of the cursor. +@item @key{C-d} +Delete the character underneath the cursor. +@item @w{Printing characters} +Insert the character into the line at the cursor. +@item @key{C-_} +Undo the last editing command. You can undo all the way back to an +empty line. +@end table + +@node Readline Movement Commands +@subsection Readline Movement Commands + + +The above table describes the most basic possible keystrokes that you need +in order to do editing of the input line. For your convenience, many +other commands have been added in addition to @key{C-b}, @key{C-f}, +@key{C-d}, and @key{DEL}. Here are some commands for moving more rapidly +about the line. + +@table @key +@item C-a +Move to the start of the line. +@item C-e +Move to the end of the line. +@item M-f +Move forward a word, where a word is composed of letters and digits. +@item M-b +Move backward a word. +@item C-l +Clear the screen, reprinting the current line at the top. +@end table + +Notice how @key{C-f} moves forward a character, while @key{M-f} moves +forward a word. It is a loose convention that control keystrokes +operate on characters while meta keystrokes operate on words. + +@node Readline Killing Commands +@subsection Readline Killing Commands + +@cindex killing text +@cindex yanking text + +@dfn{Killing} text means to delete the text from the line, but to save +it away for later use, usually by @dfn{yanking} (re-inserting) +it back into the line. +If the description for a command says that it `kills' text, then you can +be sure that you can get the text back in a different (or the same) +place later. + +When you use a kill command, the text is saved in a @dfn{kill-ring}. +Any number of consecutive kills save all of the killed text together, so +that when you yank it back, you get it all. The kill +ring is not line specific; the text that you killed on a previously +typed line is available to be yanked back later, when you are typing +another line. +@cindex kill ring + +Here is the list of commands for killing text. + +@table @key +@item C-k +Kill the text from the current cursor position to the end of the line. + +@item M-d +Kill from the cursor to the end of the current word, or if between +words, to the end of the next word. + +@item M-DEL +Kill from the cursor the start of the previous word, or if between +words, to the start of the previous word. + +@item C-w +Kill from the cursor to the previous whitespace. This is different than +@key{M-DEL} because the word boundaries differ. + +@end table + +Here is how to @dfn{yank} the text back into the line. Yanking +means to copy the most-recently-killed text from the kill buffer. + +@table @key +@item C-y +Yank the most recently killed text back into the buffer at the cursor. + +@item M-y +Rotate the kill-ring, and yank the new top. You can only do this if +the prior command is @key{C-y} or @key{M-y}. +@end table + +@node Readline Arguments +@subsection Readline Arguments + +You can pass numeric arguments to Readline commands. Sometimes the +argument acts as a repeat count, other times it is the @i{sign} of the +argument that is significant. If you pass a negative argument to a +command which normally acts in a forward direction, that command will +act in a backward direction. For example, to kill text back to the +start of the line, you might type @samp{M-- C-k}. + +The general way to pass numeric arguments to a command is to type meta +digits before the command. If the first `digit' typed is a minus +sign (@key{-}), then the sign of the argument will be negative. Once +you have typed one meta digit to get the argument started, you can type +the remainder of the digits, and then the command. For example, to give +the @key{C-d} command an argument of 10, you could type @samp{M-1 0 C-d}. + +@node Searching +@subsection Searching for Commands in the History + +Readline provides commands for searching through the command history +@ifset BashFeatures +(@pxref{Bash History Facilities}) +@end ifset +for lines containing a specified string. +There are two search modes: @var{incremental} and @var{non-incremental}. + +Incremental searches begin before the user has finished typing the +search string. +As each character of the search string is typed, Readline displays +the next entry from the history matching the string typed so far. +An incremental search requires only as many characters as needed to +find the desired history entry. +The @key{ESC} character is used to terminate an incremental search. +@key{C-j} will also terminate the search. +@key{C-g} will abort an incremental search and restore the original line. +When the search is terminated, the history entry containing the +search string becomes the current line. +To find other matching entries in the history list, type @key{C-s} or +@key{C-r} as appropriate. +This will search backward or forward in the history for the next +entry matching the search string typed so far. +Any other key sequence bound to a Readline command will terminate +the search and execute that command. +For instance, a @key{RET} will terminate the search and accept +the line, thereby executing the command from the history list. + +Non-incremental searches read the entire search string before starting +to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. + +@node Readline Init File +@section Readline Init File +@cindex initialization file, readline + +Although the Readline library comes with a set of @code{emacs}-like +keybindings installed by default, it is possible to use a different set +of keybindings. +Any user can customize programs that use Readline by putting +commands in an @dfn{inputrc} file in his home directory. +The name of this +@ifset BashFeatures +file is taken from the value of the shell variable @code{INPUTRC}. If +@end ifset +@ifclear BashFeatures +file is taken from the value of the environment variable @code{INPUTRC}. If +@end ifclear +that variable is unset, the default is @file{~/.inputrc}. + +When a program which uses the Readline library starts up, the +init file is read, and the key bindings are set. + +In addition, the @code{C-x C-r} command re-reads this init file, thus +incorporating any changes that you might have made to it. + +@menu +* Readline Init File Syntax:: Syntax for the commands in the inputrc file. + +* Conditional Init Constructs:: Conditional key bindings in the inputrc file. + +* Sample Init File:: An example inputrc file. +@end menu + +@node Readline Init File Syntax +@subsection Readline Init File Syntax + +There are only a few basic constructs allowed in the +Readline init file. Blank lines are ignored. +Lines beginning with a @samp{#} are comments. +Lines beginning with a @samp{$} indicate conditional +constructs (@pxref{Conditional Init Constructs}). Other lines +denote variable settings and key bindings. + +@table @asis +@item Variable Settings +You can modify the run-time behavior of Readline by +altering the values of variables in Readline +using the @code{set} command within the init file. Here is how to +change from the default Emacs-like key binding to use +@code{vi} line editing commands: + +@example +set editing-mode vi +@end example + +A great deal of run-time behavior is changeable with the following +variables. + +@table @code + +@item bell-style +@vindex bell-style +Controls what happens when Readline wants to ring the terminal bell. +If set to @samp{none}, Readline never rings the bell. If set to +@samp{visible}, Readline uses a visible bell if one is available. +If set to @samp{audible} (the default), Readline attempts to ring +the terminal's bell. + +@item comment-begin +@vindex comment-begin +The string to insert at the beginning of the line when the +@code{insert-comment} command is executed. The default value +is @code{"#"}. + +@item completion-ignore-case +If set to @samp{on}, Readline performs filename matching and completion +in a case-insensitive fashion. +The default value is @samp{off}. + +@item completion-query-items +@vindex completion-query-items +The number of possible completions that determines when the user is +asked whether he wants to see the list of possibilities. If the +number of possible completions is greater than this value, +Readline will ask the user whether or not he wishes to view +them; otherwise, they are simply listed. The default limit is +@code{100}. + +@item convert-meta +@vindex convert-meta +If set to @samp{on}, Readline will convert characters with the +eighth bit set to an ASCII key sequence by stripping the eighth +bit and prepending an @key{ESC} character, converting them to a +meta-prefixed key sequence. The default value is @samp{on}. + +@item disable-completion +@vindex disable-completion +If set to @samp{On}, Readline will inhibit word completion. +Completion characters will be inserted into the line as if they had +been mapped to @code{self-insert}. The default is @samp{off}. + +@item editing-mode +@vindex editing-mode +The @code{editing-mode} variable controls which default set of +key bindings is used. By default, Readline starts up in Emacs editing +mode, where the keystrokes are most similar to Emacs. This variable can be +set to either @samp{emacs} or @samp{vi}. + +@item enable-keypad +@vindex enable-keypad +When set to @samp{on}, Readline will try to enable the application +keypad when it is called. Some systems need this to enable the +arrow keys. The default is @samp{off}. + +@item expand-tilde +@vindex expand-tilde +If set to @samp{on}, tilde expansion is performed when Readline +attempts word completion. The default is @samp{off}. + +@item horizontal-scroll-mode +@vindex horizontal-scroll-mode +This variable can be set to either @samp{on} or @samp{off}. Setting it +to @samp{on} means that the text of the lines being edited will scroll +horizontally on a single screen line when they are longer than the width +of the screen, instead of wrapping onto a new screen line. By default, +this variable is set to @samp{off}. + +@item keymap +@vindex keymap +Sets Readline's idea of the current keymap for key binding commands. +Acceptable @code{keymap} names are +@code{emacs}, +@code{emacs-standard}, +@code{emacs-meta}, +@code{emacs-ctlx}, +@code{vi}, +@code{vi-command}, and +@code{vi-insert}. +@code{vi} is equivalent to @code{vi-command}; @code{emacs} is +equivalent to @code{emacs-standard}. The default value is @code{emacs}. +The value of the @code{editing-mode} variable also affects the +default keymap. + +@item mark-directories +If set to @samp{on}, completed directory names have a slash +appended. The default is @samp{on}. + +@item mark-modified-lines +@vindex mark-modified-lines +This variable, when set to @samp{on}, causes Readline to display an +asterisk (@samp{*}) at the start of history lines which have been modified. +This variable is @samp{off} by default. + +@item input-meta +@vindex input-meta +@vindex meta-flag +If set to @samp{on}, Readline will enable eight-bit input (it +will not strip the eighth bit from the characters it reads), +regardless of what the terminal claims it can support. The +default value is @samp{off}. The name @code{meta-flag} is a +synonym for this variable. + +@item output-meta +@vindex output-meta +If set to @samp{on}, Readline will display characters with the +eighth bit set directly rather than as a meta-prefixed escape +sequence. The default is @samp{off}. + +@item print-completions-horizontally +If set to @samp{on}, Readline will display completions with matches +sorted horizontally in alphabetical order, rather than down the screen. +The default is @samp{off}. + +@item show-all-if-ambiguous +@vindex show-all-if-ambiguous +This alters the default behavior of the completion functions. If +set to @samp{on}, +words which have more than one possible completion cause the +matches to be listed immediately instead of ringing the bell. +The default value is @samp{off}. + +@item visible-stats +@vindex visible-stats +If set to @samp{on}, a character denoting a file's type +is appended to the filename when listing possible +completions. The default is @samp{off}. + +@end table + +@item Key Bindings +The syntax for controlling key bindings in the init file is +simple. First you have to know the name of the command that you +want to change. The following sections contain tables of the command +name, the default keybinding, if any, and a short description of what +the command does. + +Once you know the name of the command, simply place the name of the key +you wish to bind the command to, a colon, and then the name of the +command on a line in the init file. The name of the key +can be expressed in different ways, depending on which is most +comfortable for you. + +@table @asis +@item @w{@var{keyname}: @var{function-name} or @var{macro}} +@var{keyname} is the name of a key spelled out in English. For example: +@example +Control-u: universal-argument +Meta-Rubout: backward-kill-word +Control-o: "> output" +@end example + +In the above example, @key{C-u} is bound to the function +@code{universal-argument}, and @key{C-o} is bound to run the macro +expressed on the right hand side (that is, to insert the text +@samp{> output} into the line). + +@item @w{"@var{keyseq}": @var{function-name} or @var{macro}} +@var{keyseq} differs from @var{keyname} above in that strings +denoting an entire key sequence can be specified, by placing +the key sequence in double quotes. Some GNU Emacs style key +escapes can be used, as in the following example, but the +special character names are not recognized. + +@example +"\C-u": universal-argument +"\C-x\C-r": re-read-init-file +"\e[11~": "Function Key 1" +@end example + +In the above example, @key{C-u} is bound to the function +@code{universal-argument} (just as it was in the first example), +@samp{@key{C-x} @key{C-r}} is bound to the function @code{re-read-init-file}, +and @samp{@key{ESC} @key{[} @key{1} @key{1} @key{~}} is bound to insert +the text @samp{Function Key 1}. + +@end table + +The following GNU Emacs style escape sequences are available when +specifying key sequences: + +@table @code +@item @kbd{\C-} +control prefix +@item @kbd{\M-} +meta prefix +@item @kbd{\e} +an escape character +@item @kbd{\\} +backslash +@item @kbd{\"} +@key{"} +@item @kbd{\'} +@key{'} +@end table + +In addition to the GNU Emacs style escape sequences, a second +set of backslash escapes is available: + +@table @code +@item \a +alert (bell) +@item \b +backspace +@item \d +delete +@item \f +form feed +@item \n +newline +@item \r +carriage return +@item \t +horizontal tab +@item \v +vertical tab +@item \@var{nnn} +the character whose ASCII code is the octal value @var{nnn} +(one to three digits) +@item \x@var{nnn} +the character whose ASCII code is the hexadecimal value @var{nnn} +(one to three digits) +@end table + +When entering the text of a macro, single or double quotes must +be used to indicate a macro definition. +Unquoted text is assumed to be a function name. +In the macro body, the backslash escapes described above are expanded. +Backslash will quote any other character in the macro text, +including @samp{"} and @samp{'}. +For example, the following binding will make @samp{C-x \} +insert a single @samp{\} into the line: +@example +"\C-x\\": "\\" +@end example + +@end table + +@node Conditional Init Constructs +@subsection Conditional Init Constructs + +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key +bindings and variable settings to be performed as the result +of tests. There are four parser directives used. + +@table @code +@item $if +The @code{$if} construct allows bindings to be made based on the +editing mode, the terminal being used, or the application using +Readline. The text of the test extends to the end of the line; +no characters are required to isolate it. + +@table @code +@item mode +The @code{mode=} form of the @code{$if} directive is used to test +whether Readline is in @code{emacs} or @code{vi} mode. +This may be used in conjunction +with the @samp{set keymap} command, for instance, to set bindings in +the @code{emacs-standard} and @code{emacs-ctlx} keymaps only if +Readline is starting out in @code{emacs} mode. + +@item term +The @code{term=} form may be used to include terminal-specific +key bindings, perhaps to bind the key sequences output by the +terminal's function keys. The word on the right side of the +@samp{=} is tested against both the full name of the terminal and +the portion of the terminal name before the first @samp{-}. This +allows @code{sun} to match both @code{sun} and @code{sun-cmd}, +for instance. + +@item application +The @var{application} construct is used to include +application-specific settings. Each program using the Readline +library sets the @var{application name}, and you can test for it. +This could be used to bind key sequences to functions useful for +a specific program. For instance, the following command adds a +key sequence that quotes the current or previous word in Bash: +@example +$if Bash +# Quote the current or previous word +"\C-xq": "\eb\"\ef\"" +$endif +@end example +@end table + +@item $endif +This command, as seen in the previous example, terminates an +@code{$if} command. + +@item $else +Commands in this branch of the @code{$if} directive are executed if +the test fails. + +@item $include +This directive takes a single filename as an argument and reads commands +and bindings from that file. +@example +$include /etc/inputrc +@end example +@end table + +@node Sample Init File +@subsection Sample Init File + +Here is an example of an inputrc file. This illustrates key +binding, variable assignment, and conditional syntax. + +@example +@page +# This file controls the behaviour of line input editing for +# programs that use the Gnu Readline library. Existing programs +# include FTP, Bash, and Gdb. +# +# You can re-read the inputrc file with C-x C-r. +# Lines beginning with '#' are comments. +# +# First, include any systemwide bindings and variable assignments from +# /etc/Inputrc +$include /etc/Inputrc + +# +# Set various bindings for emacs mode. + +set editing-mode emacs + +$if mode=emacs + +Meta-Control-h: backward-kill-word Text after the function name is ignored + +# +# Arrow keys in keypad mode +# +#"\M-OD": backward-char +#"\M-OC": forward-char +#"\M-OA": previous-history +#"\M-OB": next-history +# +# Arrow keys in ANSI mode +# +"\M-[D": backward-char +"\M-[C": forward-char +"\M-[A": previous-history +"\M-[B": next-history +# +# Arrow keys in 8 bit keypad mode +# +#"\M-\C-OD": backward-char +#"\M-\C-OC": forward-char +#"\M-\C-OA": previous-history +#"\M-\C-OB": next-history +# +# Arrow keys in 8 bit ANSI mode +# +#"\M-\C-[D": backward-char +#"\M-\C-[C": forward-char +#"\M-\C-[A": previous-history +#"\M-\C-[B": next-history + +C-q: quoted-insert + +$endif + +# An old-style binding. This happens to be the default. +TAB: complete + +# Macros that are convenient for shell interaction +$if Bash +# edit the path +"\C-xp": "PATH=$@{PATH@}\e\C-e\C-a\ef\C-f" +# prepare to type a quoted word -- insert open and close double quotes +# and move to just after the open quote +"\C-x\"": "\"\"\C-b" +# insert a backslash (testing backslash escapes in sequences and macros) +"\C-x\\": "\\" +# Quote the current or previous word +"\C-xq": "\eb\"\ef\"" +# Add a binding to refresh the line, which is unbound +"\C-xr": redraw-current-line +# Edit variable on current line. +"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y=" +$endif + +# use a visible bell if one is available +set bell-style visible + +# don't strip characters to 7 bits when reading +set input-meta on + +# allow iso-latin1 characters to be inserted rather than converted to +# prefix-meta sequences +set convert-meta off + +# display characters with the eighth bit set directly rather than +# as meta-prefixed characters +set output-meta on + +# if there are more than 150 possible completions for a word, ask the +# user if he wants to see all of them +set completion-query-items 150 + +# For FTP +$if Ftp +"\C-xg": "get \M-?" +"\C-xt": "put \M-?" +"\M-.": yank-last-arg +$endif +@end example + +@node Bindable Readline Commands +@section Bindable Readline Commands + +@menu +* Commands For Moving:: Moving about the line. +* Commands For History:: Getting at previous lines. +* Commands For Text:: Commands for changing text. +* Commands For Killing:: Commands for killing and yanking. +* Numeric Arguments:: Specifying numeric arguments, repeat counts. +* Commands For Completion:: Getting Readline to do the typing for you. +* Keyboard Macros:: Saving and re-executing typed characters +* Miscellaneous Commands:: Other miscellaneous commands. +@end menu + +This section describes Readline commands that may be bound to key +sequences. + +@node Commands For Moving +@subsection Commands For Moving +@ftable @code +@item beginning-of-line (C-a) +Move to the start of the current line. + +@item end-of-line (C-e) +Move to the end of the line. + +@item forward-char (C-f) +Move forward a character. + +@item backward-char (C-b) +Move back a character. + +@item forward-word (M-f) +Move forward to the end of the next word. Words are composed of +letters and digits. + +@item backward-word (M-b) +Move back to the start of this, or the previous, word. Words are +composed of letters and digits. + +@item clear-screen (C-l) +Clear the screen and redraw the current line, +leaving the current line at the top of the screen. + +@item redraw-current-line () +Refresh the current line. By default, this is unbound. + +@end ftable + +@node Commands For History +@subsection Commands For Manipulating The History + +@ftable @code +@item accept-line (Newline, Return) +@ifset BashFeatures +Accept the line regardless of where the cursor is. If this line is +non-empty, add it to the history list according to the setting of +the @code{HISTCONTROL} and @code{HISTIGNORE} variables. +If this line was a history line, then restore the history line to its +original state. +@end ifset +@ifclear BashFeatures +Accept the line regardless of where the cursor is. If this line is +non-empty, add it to the history list. If this line was a history +line, then restore the history line to its original state. +@end ifclear + +@item previous-history (C-p) +Move `up' through the history list. + +@item next-history (C-n) +Move `down' through the history list. + +@item beginning-of-history (M-<) +Move to the first line in the history. + +@item end-of-history (M->) +Move to the end of the input history, i.e., the line currently +being entered. + +@item reverse-search-history (C-r) +Search backward starting at the current line and moving `up' through +the history as necessary. This is an incremental search. + +@item forward-search-history (C-s) +Search forward starting at the current line and moving `down' through +the the history as necessary. This is an incremental search. + +@item non-incremental-reverse-search-history (M-p) +Search backward starting at the current line and moving `up' +through the history as necessary using a non-incremental search +for a string supplied by the user. + +@item non-incremental-forward-search-history (M-n) +Search forward starting at the current line and moving `down' +through the the history as necessary using a non-incremental search +for a string supplied by the user. + +@item history-search-forward () +Search forward through the history for the string of characters +between the start of the current line and the current cursor +position (the @var{point}). This is a non-incremental search. By +default, this command is unbound. + +@item history-search-backward () +Search backward through the history for the string of characters +between the start of the current line and the point. This +is a non-incremental search. By default, this command is unbound. + +@item yank-nth-arg (M-C-y) +Insert the first argument to the previous command (usually +the second word on the previous line). With an argument @var{n}, +insert the @var{n}th word from the previous command (the words +in the previous command begin with word 0). A negative argument +inserts the @var{n}th word from the end of the previous command. + +@item yank-last-arg (M-., M-_) +Insert last argument to the previous command (the last word of the +previous history entry). With an +argument, behave exactly like @code{yank-nth-arg}. +Successive calls to @code{yank-last-arg} move back through the history +list, inserting the last argument of each line in turn. + +@end ftable + +@node Commands For Text +@subsection Commands For Changing Text + +@ftable @code +@item delete-char (C-d) +Delete the character under the cursor. If the cursor is at the +beginning of the line, there are no characters in the line, and +the last character typed was not bound to @code{delete-char}, then +return @code{EOF}. + +@item backward-delete-char (Rubout) +Delete the character behind the cursor. A numeric argument means +to kill the characters instead of deleting them. + +@item quoted-insert (C-q, C-v) +Add the next character typed to the line verbatim. This is +how to insert key sequences like @key{C-q}, for example. + +@ifclear BashFeatures +@item tab-insert (M-TAB) +Insert a tab character. +@end ifclear + +@item self-insert (a, b, A, 1, !, ...) +Insert yourself. + +@item transpose-chars (C-t) +Drag the character before the cursor forward over +the character at the cursor, moving the +cursor forward as well. If the insertion point +is at the end of the line, then this +transposes the last two characters of the line. +Negative arguments don't work. + +@item transpose-words (M-t) +Drag the word behind the cursor past the word in front of the cursor +moving the cursor over that word as well. + +@item upcase-word (M-u) +Uppercase the current (or following) word. With a negative argument, +uppercase the previous word, but do not move the cursor. + +@item downcase-word (M-l) +Lowercase the current (or following) word. With a negative argument, +lowercase the previous word, but do not move the cursor. + +@item capitalize-word (M-c) +Capitalize the current (or following) word. With a negative argument, +capitalize the previous word, but do not move the cursor. + +@end ftable + +@node Commands For Killing +@subsection Killing And Yanking + +@ftable @code + +@item kill-line (C-k) +Kill the text from the current cursor position to the end of the line. + +@item backward-kill-line (C-x Rubout) +Kill backward to the beginning of the line. + +@item unix-line-discard (C-u) +Kill backward from the cursor to the beginning of the current line. +The killed text is saved on the kill-ring. + +@item kill-whole-line () +Kill all characters on the current line, no matter where the +cursor is. By default, this is unbound. + +@item kill-word (M-d) +Kill from the cursor to the end of the current word, or if between +words, to the end of the next word. Word boundaries are the same +as @code{forward-word}. + +@item backward-kill-word (M-DEL) +Kill the word behind the cursor. Word boundaries are the same +as @code{backward-word}. + +@item unix-word-rubout (C-w) +Kill the word behind the cursor, using white space as a word +boundary. The killed text is saved on the kill-ring. + +@item delete-horizontal-space () +Delete all spaces and tabs around point. By default, this is unbound. + +@item kill-region () +Kill the text between the point and the @emph{mark} (saved +cursor position). This text is referred to as the @var{region}. +By default, this command is unbound. + +@item copy-region-as-kill () +Copy the text in the region to the kill buffer, so it can be yanked +right away. By default, this command is unbound. + +@item copy-backward-word () +Copy the word before point to the kill buffer. +The word boundaries are the same as @code{backward-word}. +By default, this command is unbound. + +@item copy-forward-word () +Copy the word following point to the kill buffer. +The word boundaries are the same as @code{forward-word}. +By default, this command is unbound. + +@item yank (C-y) +Yank the top of the kill ring into the buffer at the current +cursor position. + +@item yank-pop (M-y) +Rotate the kill-ring, and yank the new top. You can only do this if +the prior command is yank or yank-pop. +@end ftable + +@node Numeric Arguments +@subsection Specifying Numeric Arguments +@ftable @code + +@item digit-argument (M-0, M-1, ... M--) +Add this digit to the argument already accumulating, or start a new +argument. @key{M--} starts a negative argument. + +@item universal-argument () +This is another way to specify an argument. +If this command is followed by one or more digits, optionally with a +leading minus sign, those digits define the argument. +If the command is followed by digits, executing @code{universal-argument} +again ends the numeric argument, but is otherwise ignored. +As a special case, if this command is immediately followed by a +character that is neither a digit or minus sign, the argument count +for the next command is multiplied by four. +The argument count is initially one, so executing this function the +first time makes the argument count four, a second time makes the +argument count sixteen, and so on. +By default, this is not bound to a key. +@end ftable + +@node Commands For Completion +@subsection Letting Readline Type For You + +@ftable @code +@item complete (TAB) +Attempt to do completion on the text before the cursor. This is +application-specific. Generally, if you are typing a filename +argument, you can do filename completion; if you are typing a command, +you can do command completion; if you are typing in a symbol to GDB, you +can do symbol name completion; if you are typing in a variable to Bash, +you can do variable name completion, and so on. +@ifset BashFeatures +Bash attempts completion treating the text as a variable (if the +text begins with @samp{$}), username (if the text begins with +@samp{~}), hostname (if the text begins with @samp{@@}), or +command (including aliases and functions) in turn. If none +of these produces a match, filename completion is attempted. +@end ifset + +@item possible-completions (M-?) +List the possible completions of the text before the cursor. + +@item insert-completions (M-*) +Insert all completions of the text before point that would have +been generated by @code{possible-completions}. + +@item menu-complete () +Similar to @code{complete}, but replaces the word to be completed +with a single match from the list of possible completions. +Repeated execution of @code{menu-complete} steps through the list +of possible completions, inserting each match in turn. +At the end of the list of completions, the bell is rung and the +original text is restored. +An argument of @var{n} moves @var{n} positions forward in the list +of matches; a negative argument may be used to move backward +through the list. +This command is intended to be bound to @code{TAB}, but is unbound +by default. + +@ifset BashFeatures +@item complete-filename (M-/) +Attempt filename completion on the text before point. + +@item possible-filename-completions (C-x /) +List the possible completions of the text before point, +treating it as a filename. + +@item complete-username (M-~) +Attempt completion on the text before point, treating +it as a username. + +@item possible-username-completions (C-x ~) +List the possible completions of the text before point, +treating it as a username. + +@item complete-variable (M-$) +Attempt completion on the text before point, treating +it as a shell variable. + +@item possible-variable-completions (C-x $) +List the possible completions of the text before point, +treating it as a shell variable. + +@item complete-hostname (M-@@) +Attempt completion on the text before point, treating +it as a hostname. + +@item possible-hostname-completions (C-x @@) +List the possible completions of the text before point, +treating it as a hostname. + +@item complete-command (M-!) +Attempt completion on the text before point, treating +it as a command name. Command completion attempts to +match the text against aliases, reserved words, shell +functions, shell builtins, and finally executable filenames, +in that order. + +@item possible-command-completions (C-x !) +List the possible completions of the text before point, +treating it as a command name. + +@item dynamic-complete-history (M-TAB) +Attempt completion on the text before point, comparing +the text against lines from the history list for possible +completion matches. + +@item complete-into-braces (M-@{) +Perform filename completion and return the list of possible completions +enclosed within braces so the list is available to the shell +(@pxref{Brace Expansion}). + +@end ifset +@end ftable + +@node Keyboard Macros +@subsection Keyboard Macros +@ftable @code + +@item start-kbd-macro (C-x () +Begin saving the characters typed into the current keyboard macro. + +@item end-kbd-macro (C-x )) +Stop saving the characters typed into the current keyboard macro +and save the definition. + +@item call-last-kbd-macro (C-x e) +Re-execute the last keyboard macro defined, by making the characters +in the macro appear as if typed at the keyboard. + +@end ftable + +@node Miscellaneous Commands +@subsection Some Miscellaneous Commands +@ftable @code + +@item re-read-init-file (C-x C-r) +Read in the contents of the inputrc file, and incorporate +any bindings or variable assignments found there. + +@item abort (C-g) +Abort the current editing command and +ring the terminal's bell (subject to the setting of +@code{bell-style}). + +@item do-uppercase-version (M-a, M-b, M-@var{x}, @dots{}) +If the metafied character @var{x} is lowercase, run the command +that is bound to the corresponding uppercase character. + +@item prefix-meta (ESC) +Make the next character typed be metafied. This is for keyboards +without a meta key. Typing @samp{ESC f} is equivalent to typing +@samp{M-f}. + +@item undo (C-_, C-x C-u) +Incremental undo, separately remembered for each line. + +@item revert-line (M-r) +Undo all changes made to this line. This is like executing the @code{undo} +command enough times to get back to the beginning. + +@item tilde-expand (M-~) +Perform tilde expansion on the current word. + +@item set-mark (C-@@) +Set the mark to the current point. If a +numeric argument is supplied, the mark is set to that position. + +@item exchange-point-and-mark (C-x C-x) +Swap the point with the mark. The current cursor position is set to +the saved position, and the old cursor position is saved as the mark. + +@item character-search (C-]) +A character is read and point is moved to the next occurrence of that +character. A negative count searches for previous occurrences. + +@item character-search-backward (M-C-]) +A character is read and point is moved to the previous occurrence +of that character. A negative count searches for subsequent +occurrences. + +@item insert-comment (M-#) +The value of the @code{comment-begin} +variable is inserted at the beginning of the current line, +and the line is accepted as if a newline had been typed. +@ifset BashFeatures +This makes the current line a shell comment. +@end ifset + +@item dump-functions () +Print all of the functions and their key bindings to the +Readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@item dump-variables () +Print all of the settable variables and their values to the +Readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@item dump-macros () +Print all of the Readline key sequences bound to macros and the +strings they ouput. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@ifset BashFeatures +@item glob-expand-word (C-x *) +The word before point is treated as a pattern for pathname expansion, +and the list of matching file names is inserted, replacing the word. + +@item glob-list-expansions (C-x g) +The list of expansions that would have been generated by +@code{glob-expand-word} is displayed, and the line is redrawn. + +@item display-shell-version (C-x C-v) +Display version information about the current instance of Bash. + +@item shell-expand-line (M-C-e) +Expand the line as the shell does. +This performs alias and history expansion as well as all of the shell +word expansions (@pxref{Shell Expansions}). + +@item history-expand-line (M-^) +Perform history expansion on the current line. + +@item magic-space () +Perform history expansion on the current line and insert a space +(@pxref{History Interaction}). + +@item alias-expand-line () +Perform alias expansion on the current line (@pxref{Aliases}). + +@item history-and-alias-expand-line () +Perform history and alias expansion on the current line. + +@item insert-last-argument (M-., M-_) +A synonym for @code{yank-last-arg}. + +@item operate-and-get-next (C-o) +Accept the current line for execution and fetch the next line +relative to the current line from the history for editing. Any +argument is ignored. + +@item emacs-editing-mode (C-e) +When in @code{vi} editing mode, this causes a switch back to +@code{emacs} editing mode, as if the command @samp{set -o emacs} had +been executed. + +@end ifset + +@end ftable + +@node Readline vi Mode +@section Readline vi Mode + +While the Readline library does not have a full set of @code{vi} +editing functions, it does contain enough to allow simple editing +of the line. The Readline @code{vi} mode behaves as specified in +the @sc{POSIX} 1003.2 standard. + +@ifset BashFeatures +In order to switch interactively between @code{emacs} and @code{vi} +editing modes, use the @samp{set -o emacs} and @samp{set -o vi} +commands (@pxref{The Set Builtin}). +@end ifset +@ifclear BashFeatures +In order to switch interactively between @code{emacs} and @code{vi} +editing modes, use the command M-C-j (toggle-editing-mode). +@end ifclear +The Readline default is @code{emacs} mode. + +When you enter a line in @code{vi} mode, you are already placed in +`insertion' mode, as if you had typed an @samp{i}. Pressing @key{ESC} +switches you into `command' mode, where you can edit the text of the +line with the standard @code{vi} movement keys, move to previous +history lines with @samp{k} and subsequent lines with @samp{j}, and +so forth. diff --git a/readline/doc/texi2dvi b/readline/doc/texi2dvi new file mode 100755 index 00000000000..8fb2f908771 --- /dev/null +++ b/readline/doc/texi2dvi @@ -0,0 +1,275 @@ +#! /bin/sh +# texi2dvi --- smartly produce DVI files from texinfo sources + +# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc. + +# $Id: texi2dvi,v 0.5 1995/06/20 02:21:36 friedman Exp $ + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, you can either send email to this +# program's maintainer or write to: The Free Software Foundation, +# Inc.; 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA. + +# Commentary: + +# Author: Noah Friedman <friedman@prep.ai.mit.edu> + +# Please send bug reports, etc. to bug-texinfo@prep.ai.mit.edu +# If possible, please send a copy of the output of the script called with +# the `--debug' option when making a bug report. + +# In the interest of general portability, some common bourne shell +# constructs were avoided because they weren't guaranteed to be available +# in some earlier implementations. I've tried to make this program as +# portable as possible. Welcome to unix, where the lowest common +# denominator is rapidly diminishing. +# +# Among the more interesting lossages I noticed with some bourne shells +# are: +# * No shell functions. +# * No `unset' builtin. +# * `shift' cannot take a numeric argument, and signals an error if +# there are no arguments to shift. + +# Code: + +# Name by which this script was invoked. +progname=`echo "$0" | sed -e 's/[^\/]*\///g'` + +# This string is expanded by rcs automatically when this file is checked out. +rcs_revision='$Revision: 0.5 $' +version=`set - $rcs_revision; echo $2` + +# To prevent hairy quoting and escaping later. +bq='`' +eq="'" + +usage="Usage: $progname {options} [file1] {file2 {...}} +(version $version) + +Options are: +-D, --debug Turn on shell debugging ($bq${bq}set -x$eq$eq). +-h, --help You're looking at it. +-v, --version Print version number. + +Arguments in brackets are required. Those in braces are optional. +" + +# Initialize variables. +# Don't use `unset' since old bourne shells don't have this command. +# Instead, assign them an empty value. +# Some of these, like TEX and TEXINDEX, may be inherited from the environment +backup_extension=.bak +debug= +orig_pwd="`pwd`" +verbose= +texindex="${TEXINDEX-texindex}" +tex="${TEX-tex}" + +# Save this so we can construct a new TEXINPUTS path for each file to be +# processed. +TEXINPUTS_orig="$TEXINPUTS" +export TEXINPUTS + +# Parse command line arguments. +# Make sure that all wildcarded options are long enough to be unambiguous. +# It's a good idea to document the full long option name in each case. +# Long options which take arguments will need a `*' appended to the +# canonical name to match the value appended after the `=' character. +while : ; do + case $# in 0) break ;; esac + case "$1" in + -D | --debug | --d* ) + debug=t + shift + ;; + -h | --help | --h* ) + echo "$usage" 1>&2 + exit 0 + ;; + -v | --version | --v* ) + echo "texi2dvi version $version" 1>&2 + exit 0 + ;; + -- ) # Stop option processing + shift + break + ;; + -* ) + case "$1" in + --*=* ) arg=`echo "$1" | sed -e 's/=.*//'` ;; + * ) arg="$1" ;; + esac + exec 1>&2 + echo "$progname: unknown or ambiguous option $bq$arg$eq" + echo "$progname: Use $bq--help$eq for a list of options." + exit 1 + ;; + * ) + break + ;; + esac +done + +# See if there are any command line args left (which will be interpreted as +# filename arguments) +case $# in + 0 ) + exec 1>&2 + echo "$progname: at least one file name is required as an argument." + echo "$progname: Use $bq--help$eq for a description of command syntax." + exit 2 + ;; +esac + +case "$debug" in t ) set -x ;; esac + +# Texify files +for command_line_filename in ${1+"$@"} ; do + # Roughly equivalent to `dirname ...`, but more portable + directory="`echo ${command_line_filename} | sed 's/\/[^\/]*$//'`" + filename_texi="`basename ${command_line_filename}`" + # Strip off the last extension part (probably .texinfo or .texi) + filename_noext="`echo ${filename_texi} | sed 's/\.[^.]*$//'`" + + # If directory and file are the same, then it's probably because there's + # no pathname component. Set dirname to `.', the current directory. + if test "z${directory}" = "z${command_line_filename}" ; then + directory="." + fi + + # Source file might @include additional texinfo sources. Put `.' and + # directory where source file(s) reside in TEXINPUTS before anything + # else. `.' goes first to ensure that any old .aux, .cps, etc. files in + # ${directory} don't get used in preference to fresher files in `.'. + TEXINPUTS=".:${directory}:${TEXINPUTS_orig}" + + # "Unset" variables that might have values from previous iterations and + # which won't be completely reset later. + definite_index_files="" + + # See if file exists here. If it doesn't we're in trouble since, even + # though the user may be able to reenter a valid filename at the tex + # prompt (assuming they're attending the terminal), this script won't be + # able to find the right index files and so forth. + if test ! -r "${command_line_filename}" ; then + echo "${progname}: ${command_line_filename}: No such file or permission denied." 1>&2 + continue; + fi + + # Find all files having root filename with a two-letter extension, + # determine whether they're really index files, and save them. Foo.aux + # is actually the cross-references file, but we need to keep track of + # that too. + possible_index_files="`eval echo ${filename_noext}.?? ${filename_noext}.aux`" + for this_file in ${possible_index_files} ; do + # If file is empty, forget it. + if test ! -s "${this_file}" ; then + continue; + fi + + # Examine first character of file. If it's not a backslash or + # single quote, then it's definitely not an index or xref file. + first_character="`sed -n '1s/^\(.\).*$/\1/p;q' ${this_file}`" + if test "${first_character}" = "\\" -o "${first_character}" = "'" ; then + definite_index_files="${definite_index_files} ${this_file}" + fi + done + orig_index_files="${definite_index_files}" + orig_index_files_sans_aux="`echo ${definite_index_files} \ + | sed 's/'${filename_noext}'\.aux//; + s/^[ ]*//;s/[ ]*$//;'`" + + # Now save copies of original index files so we have some means of + # comparison later. + for index_file_to_save in ${orig_index_files} ; do + cp "${index_file_to_save}" "${index_file_to_save}${backup_extension}" + done + + # Run texindex on current index files. If they already exist, and + # after running TeX a first time the index files don't change, then + # there's no reason to run TeX again. But we won't know that if the + # index files are out of date or nonexistent. + if test "${orig_index_files_sans_aux}" ; then + ${texindex} ${orig_index_files_sans_aux} + fi + + if ${tex} ${command_line_filename} ; then # TeX run first time + definite_index_files="" + # Get list of new index files + possible_index_files="`eval echo ${filename_noext}.?? ${filename_noext}.aux`" + for this_file in ${possible_index_files} ; do + # If file is empty, forget it. + if test ! -s ${this_file} ; then + continue; + fi + + # Examine first character of file. If it's not a backslash or + # single quote, then it's definitely not an index or xref file. + first_character="`sed -n '1s/^\(.\).*$/\1/p;q' ${this_file}`" + if test "${first_character}" = "\\" -o "${first_character}" = "'" ; then + definite_index_files="${definite_index_files} ${this_file}" + fi + done + new_index_files="${definite_index_files}" + new_index_files_sans_aux="`echo ${definite_index_files} \ + | sed 's/'${filename_noext}'\.aux//; + s/^[ ]*//;s/[ ]*$//;'`" + + # If old and new list don't at least have the same file list, then one + # file or another has definitely changed. + if test "${orig_index_files}" != "${new_index_files}" ; then + index_files_changed_p=t + else + # File list is the same. We must compare each file until we find a + # difference. + index_files_changed_p="" + for this_file in ${new_index_files} ; do + # cmp -s will return nonzero exit status if files differ. + cmp -s "${this_file}" "${this_file}${backup_extension}" + if test $? -ne 0 ; then + # We only need to keep comparing until we find *one* that + # differs, because we'll have to run texindex & tex no + # matter what. + index_files_changed_p=t + break + fi + done + fi + + # If index files have changed since TeX has been run, or if the aux + # file wasn't present originally, run texindex and TeX again. + if test "${index_files_changed_p}" ; then + retval=0 + if test "${new_index_files_sans_aux}" ; then + ${texindex} ${new_index_files_sans_aux} + retval=$? + fi + if test ${retval} -eq 0 ; then + ${tex} "${command_line_filename}" + fi + fi + fi + + # Generate list of files to delete, then call rm once with the entire + # list. This is significantly faster than multiple executions of rm. + file_list="" + for file in ${orig_index_files} ; do + file_list="${file_list} ${file}${backup_extension}" + done + if test "${file_list}" ; then + rm -f ${file_list} + fi +done + +# texi2dvi ends here diff --git a/readline/doc/texi2html b/readline/doc/texi2html new file mode 100755 index 00000000000..cc751785493 --- /dev/null +++ b/readline/doc/texi2html @@ -0,0 +1,2021 @@ +#!/usr/bin/perl +'di '; +'ig 00 '; +#+############################################################################## +# # +# File: texi2html # +# # +# Description: Program to transform most Texinfo documents to HTML # +# # +#-############################################################################## + +# @(#)texi2html 1.51 09/10/96 Written (mainly) by Lionel Cons, Lionel.Cons@cern.ch + +# The man page for this program is included at the end of this file and can be +# viewed using the command 'nroff -man texi2html'. +# Please read the copyright at the end of the man page. + +#+++############################################################################ +# # +# Constants # +# # +#---############################################################################ + +$DEBUG_TOC = 1; +$DEBUG_INDEX = 2; +$DEBUG_BIB = 4; +$DEBUG_GLOSS = 8; +$DEBUG_DEF = 16; +$DEBUG_HTML = 32; +$DEBUG_USER = 64; + +$BIBRE = '\[[\w\/]+\]'; # RE for a bibliography reference +$FILERE = '[\/\w.+-]+'; # RE for a file name +$VARRE = '[^\s\{\}]+'; # RE for a variable name +$NODERE = '[^@{}:\'`",]+'; # RE for a node name +$NODESRE = '[^@{}:\'`"]+'; # RE for a list of node names +$XREFRE = '[^@{}]+'; # RE for a xref (should use NODERE) + +$ERROR = "***"; # prefix for errors and warnings +$THISPROG = "texi2html 1.51"; # program name and version +$HOMEPAGE = "http://wwwcn.cern.ch/dci/texi2html/"; # program home page +$TODAY = &pretty_date; # like "20 September 1993" +$SPLITTAG = "<!-- SPLIT HERE -->\n"; # tag to know where to split +$PROTECTTAG = "_ThisIsProtected_"; # tag to recognize protected sections +$html2_doctype = '<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0 Strict Level 2//EN">'; + +# +# language dependent constants +# +#$LDC_SEE = 'see'; +#$LDC_SECTION = 'section'; +#$LDC_IN = 'in'; +#$LDC_TOC = 'Table of Contents'; +#$LDC_GOTO = 'Go to the'; +#$LDC_FOOT = 'Footnotes'; +# TODO: @def* shortcuts + +# +# pre-defined indices +# +%predefined_index = ( + 'cp', 'c', + 'fn', 'f', + 'vr', 'v', + 'ky', 'k', + 'pg', 'p', + 'tp', 't', + ); + +# +# valid indices +# +%valid_index = ( + 'c', 1, + 'f', 1, + 'v', 1, + 'k', 1, + 'p', 1, + 't', 1, + ); + +# +# texinfo section names to level +# +%sec2level = ( + 'top', 0, + 'chapter', 1, + 'unnumbered', 1, + 'majorheading', 1, + 'chapheading', 1, + 'appendix', 1, + 'section', 2, + 'unnumberedsec', 2, + 'heading', 2, + 'appendixsec', 2, + 'appendixsection', 2, + 'subsection', 3, + 'unnumberedsubsec', 3, + 'subheading', 3, + 'appendixsubsec', 3, + 'subsubsection', 4, + 'unnumberedsubsubsec', 4, + 'subsubheading', 4, + 'appendixsubsubsec', 4, + ); + +# +# accent map, TeX command to ISO name +# +%accent_map = ( + '"', 'uml', + '~', 'tilde', + '^', 'circ', + '`', 'grave', + '\'', 'acute', + ); + +# +# texinfo "simple things" (@foo) to HTML ones +# +%simple_map = ( + # cf. makeinfo.c + "*", "<BR>", # HTML+ + " ", " ", + "\n", "\n", + "|", "", + # spacing commands + ":", "", + "!", "!", + "?", "?", + ".", ".", + ); + +# +# texinfo "things" (@foo{}) to HTML ones +# +%things_map = ( + 'TeX', 'TeX', + 'br', '<P>', # paragraph break + 'bullet', '*', + 'copyright', '(C)', + 'dots', '...', + 'equiv', '==', + 'error', 'error-->', + 'expansion', '==>', + 'minus', '-', + 'point', '-!-', + 'print', '-|', + 'result', '=>', + 'today', $TODAY, + ); + +# +# texinfo styles (@foo{bar}) to HTML ones +# +%style_map = ( + 'asis', '', + 'b', 'B', + 'cite', 'CITE', + 'code', 'CODE', + 'ctrl', '&do_ctrl', # special case + 'dfn', 'STRONG', # DFN tag is illegal in the standard + 'dmn', '', # useless + 'emph', 'EM', + 'file', '"TT', # will put quotes, cf. &apply_style + 'i', 'I', + 'kbd', 'KBD', + 'key', 'KBD', + 'r', '', # unsupported + 'samp', '"SAMP', # will put quotes, cf. &apply_style + 'sc', '&do_sc', # special case + 'strong', 'STRONG', + 't', 'TT', + 'titlefont', '', # useless + 'var', 'VAR', + 'w', '', # unsupported + ); + +# +# texinfo format (@foo/@end foo) to HTML ones +# +%format_map = ( + 'display', 'PRE', + 'example', 'PRE', + 'format', 'PRE', + 'lisp', 'PRE', + 'quotation', 'BLOCKQUOTE', + 'smallexample', 'PRE', + 'smalllisp', 'PRE', + # lists + 'itemize', 'UL', + 'enumerate', 'OL', + # poorly supported + 'flushleft', 'PRE', + 'flushright', 'PRE', + ); + +# +# texinfo definition shortcuts to real ones +# +%def_map = ( + # basic commands + 'deffn', 0, + 'defvr', 0, + 'deftypefn', 0, + 'deftypevr', 0, + 'defcv', 0, + 'defop', 0, + 'deftp', 0, + # basic x commands + 'deffnx', 0, + 'defvrx', 0, + 'deftypefnx', 0, + 'deftypevrx', 0, + 'defcvx', 0, + 'defopx', 0, + 'deftpx', 0, + # shortcuts + 'defun', 'deffn Function', + 'defmac', 'deffn Macro', + 'defspec', 'deffn {Special Form}', + 'defvar', 'defvr Variable', + 'defopt', 'defvr {User Option}', + 'deftypefun', 'deftypefn Function', + 'deftypevar', 'deftypevr Variable', + 'defivar', 'defcv {Instance Variable}', + 'defmethod', 'defop Method', + # x shortcuts + 'defunx', 'deffnx Function', + 'defmacx', 'deffnx Macro', + 'defspecx', 'deffnx {Special Form}', + 'defvarx', 'defvrx Variable', + 'defoptx', 'defvrx {User Option}', + 'deftypefunx', 'deftypefnx Function', + 'deftypevarx', 'deftypevrx Variable', + 'defivarx', 'defcvx {Instance Variable}', + 'defmethodx', 'defopx Method', + ); + +# +# things to skip +# +%to_skip = ( + # comments + 'c', 1, + 'comment', 1, + # useless + 'contents', 1, + 'shortcontents', 1, + 'summarycontents', 1, + 'footnotestyle', 1, + 'end ifclear', 1, + 'end ifset', 1, + 'titlepage', 1, + 'end titlepage', 1, + # unsupported commands (formatting) + 'afourpaper', 1, + 'cropmarks', 1, + 'finalout', 1, + 'headings', 1, + 'need', 1, + 'page', 1, + 'setchapternewpage', 1, + 'everyheading', 1, + 'everyfooting', 1, + 'evenheading', 1, + 'evenfooting', 1, + 'oddheading', 1, + 'oddfooting', 1, + 'smallbook', 1, + 'vskip', 1, + 'filbreak', 1, + # unsupported formats + 'cartouche', 1, + 'end cartouche', 1, + 'group', 1, + 'end group', 1, + ); + +#+++############################################################################ +# # +# Argument parsing, initialisation # +# # +#---############################################################################ + +$use_bibliography = 1; +$use_acc = 0; +$debug = 0; +$doctype = ''; +$check = 0; +$expandinfo = 0; +$use_glossary = 0; +$invisible_mark = ''; +$use_iso = 0; +@include_dirs = (); +$show_menu = 0; +$number_sections = 0; +$split_node = 0; +$split_chapter = 0; +$monolithic = 0; +$verbose = 0; +$usage = <<EOT; +This is $THISPROG +To convert a Texinfo file to HMTL: $0 [options] file + where options can be: + -expandinfo : use \@ifinfo sections, not \@iftex + -glossary : handle a glossary + -invisible name: use 'name' as an invisible anchor + -I dir : search also for files in 'dir' + -menu : handle menus + -monolithic : output only one file including ToC + -number : number sections + -split_chapter : split on main sections + -split_node : split on nodes + -usage : print usage instructions + -verbose : verbose output +To check converted files: $0 -check [-verbose] files +EOT + +while ($#ARGV >= 0 && $ARGV[0] =~ /^-/) { + $_ = shift(@ARGV); + if (/^-acc$/) { $use_acc = 1; next; } + if (/^-d(ebug)?(\d+)?$/) { $debug = $2 || shift(@ARGV); next; } + if (/^-doctype$/) { $doctype = shift(@ARGV); next; } + if (/^-c(heck)?$/) { $check = 1; next; } + if (/^-e(xpandinfo)?$/) { $expandinfo = 1; next; } + if (/^-g(lossary)?$/) { $use_glossary = 1; next; } + if (/^-i(nvisible)?$/) { $invisible_mark = shift(@ARGV); next; } + if (/^-iso$/) { $use_iso = 1; next; } + if (/^-I(.+)?$/) { push(@include_dirs, $1 || shift(@ARGV)); next; } + if (/^-m(enu)?$/) { $show_menu = 1; next; } + if (/^-mono(lithic)?$/) { $monolithic = 1; next; } + if (/^-n(umber)?$/) { $number_sections = 1; next; } + if (/^-s(plit)?_?(n(ode)?|c(hapter)?)?$/) { + if ($2 =~ /^n/) { + $split_node = 1; + } else { + $split_chapter = 1; + } + next; + } + if (/^-v(erbose)?$/) { $verbose = 1; next; } + die $usage; +} +if ($check) { + die $usage unless @ARGV > 0; + ✓ + exit; +} + +if (($split_node || $split_chapter) && $monolithic) { + warn "Can't use -monolithic with -split, -monolithic ignored.\n"; + $monolithic = 0; +} +if ($expandinfo) { + $to_skip{'ifinfo'}++; + $to_skip{'end ifinfo'}++; +} else { + $to_skip{'iftex'}++; + $to_skip{'end iftex'}++; +} +$invisible_mark = '<IMG SRC="invisible.xbm">' if $invisible_mark eq 'xbm'; +die $usage unless @ARGV == 1; +$docu = shift(@ARGV); +if ($docu =~ /.*\//) { + chop($docu_dir = $&); + $docu_name = $'; +} else { + $docu_dir = '.'; + $docu_name = $docu; +} +unshift(@include_dirs, $docu_dir); +$docu_name =~ s/\.te?x(i|info)?$//; # basename of the document + +$docu_doc = "$docu_name.html"; # document's contents +if ($monolithic) { + $docu_toc = $docu_foot = $docu_doc; +} else { + $docu_toc = "${docu_name}_toc.html"; # document's table of contents + $docu_foot = "${docu_name}_foot.html"; # document's footnotes +} + +# +# variables +# +%value = (); # hold texinfo variables +$value{'html'} = 1; # predefine html (the output format) +$value{'texi2html'} = '1.51'; # predefine texi2html (the translator) +# _foo: internal to track @foo +foreach ('_author', '_title', '_subtitle', + '_settitle', '_setfilename') { + $value{$_} = ''; # prevent -w warnings +} +%node2sec = (); # node to section name +%node2href = (); # node to HREF +%bib2href = (); # bibliography reference to HREF +%gloss2href = (); # glossary term to HREF +@sections = (); # list of sections +%tag2pro = (); # protected sections + +# +# initial indexes +# +$bib_num = 0; +$foot_num = 0; +$gloss_num = 0; +$idx_num = 0; +$sec_num = 0; +$doc_num = 0; +$html_num = 0; + +# +# can I use ISO8879 characters? (HTML+) +# +if ($use_iso) { + $things_map{'bullet'} = "•"; + $things_map{'copyright'} = "©"; + $things_map{'dots'} = "…"; + $things_map{'equiv'} = "≡"; + $things_map{'expansion'} = "→"; + $things_map{'point'} = "∗"; + $things_map{'result'} = "⇒"; +} + +# +# read texi2html extensions (if any) +# +$extensions = 'texi2html.ext'; # extensions in working directory +if (-f $extensions) { + print "# reading extensions from $extensions\n" if $verbose; + require($extensions); +} +($progdir = $0) =~ s/[^\/]+$//; +if ($progdir && ($progdir ne './')) { + $extensions = "${progdir}texi2html.ext"; # extensions in texi2html directory + if (-f $extensions) { + print "# reading extensions from $extensions\n" if $verbose; + require($extensions); + } +} + +print "# reading from $docu\n" if $verbose; + +#+++############################################################################ +# # +# Pass 1: read source, handle command, variable, simple substitution # +# # +#---############################################################################ + +@lines = (); # whole document +@toc_lines = (); # table of contents +$toplevel = 0; # top level seen in hierarchy +$curlevel = 0; # current level in TOC +$node = ''; # current node name +$in_table = 0; # am I inside a table +$table_type = ''; # type of table ('', 'f', 'v') +@tables = (); # nested table support +$in_bibliography = 0; # am I inside a bibliography +$in_glossary = 0; # am I inside a glossary +$in_top = 0; # am I inside the top node +$in_pre = 0; # am I inside a preformatted section +$in_list = 0; # am I inside a list +$in_html = 0; # am I inside an HTML section +$first_line = 1; # is it the first line +$dont_html = 0; # don't protect HTML on this line +$split_num = 0; # split index +$deferred_ref = ''; # deferred reference for indexes +@html_stack = (); # HTML elements stack +$html_element = ''; # current HTML element +&html_reset; + +# build code for simple substitutions +# the maps used (%simple_map and %things_map) MUST be aware of this +# watch out for regexps, / and escaped characters! +$subst_code = ''; +foreach (keys(%simple_map)) { + ($re = $_) =~ s/(\W)/\\$1/g; # protect regexp chars + $subst_code .= "s/\\\@$re/$simple_map{$_}/g;\n"; +} +foreach (keys(%things_map)) { + $subst_code .= "s/\\\@$_\\{\\}/$things_map{$_}/g;\n"; +} +if ($use_acc) { + # accentuated characters + foreach (keys(%accent_map)) { + if ($_ eq "`") { + $subst_code .= "s/$;3"; + } elsif ($_ eq "'") { + $subst_code .= "s/$;4"; + } else { + $subst_code .= "s/\\\@\\$_"; + } + $subst_code .= "([aeiou])/&\${1}$accent_map{$_};/gi;\n"; + } +} +eval("sub simple_substitutions { $subst_code }"); + +&init_input; +while ($_ = &next_line) { + # + # remove \input on the first lines only + # + if ($first_line) { + next if /^\\input/; + $first_line = 0; + } + # + # parse texinfo tags + # + $tag = ''; + $end_tag = ''; + if (/^\@end\s+(\w+)\b/) { + $end_tag = $1; + } elsif (/^\@(\w+)\b/) { + $tag = $1; + } + # + # handle @ifhtml / @end ifhtml + # + if ($in_html) { + if ($end_tag eq 'ifhtml') { + $in_html = 0; + } else { + $tag2pro{$in_html} .= $_; + } + next; + } elsif ($tag eq 'ifhtml') { + $in_html = $PROTECTTAG . ++$html_num; + push(@lines, $in_html); + next; + } + # + # try to skip the line + # + if ($end_tag) { + next if $to_skip{"end $end_tag"}; + } elsif ($tag) { + next if $to_skip{$tag}; + last if $tag eq 'bye'; + } + if ($in_top) { + # parsing the top node + if ($tag eq 'node' || $tag eq 'include' || $sec2level{$tag}) { + # no more in top + $in_top = 0; + } else { + # skip it + next; + } + } + # + # try to remove inlined comments + # syntax from tex-mode.el comment-start-skip + # + s/((^|[^\@])(\@\@)*)\@c(omment)? .*/$1/; + # non-@ substitutions cf. texinfmt.el + s/``/\"/g; + s/''/\"/g; + s/([\w ])---([\w ])/$1--$2/g; + # + # analyze the tag + # + if ($tag) { + # skip lines + &skip_until($tag), next if $tag eq 'ignore'; + if ($expandinfo) { + &skip_until($tag), next if $tag eq 'iftex'; + } else { + &skip_until($tag), next if $tag eq 'ifinfo'; + } + &skip_until($tag), next if $tag eq 'tex'; + # handle special tables + if ($tag eq 'table') { + $table_type = ''; + } elsif ($tag eq 'ftable') { + $tag = 'table'; + $table_type = 'f'; + } elsif ($tag eq 'vtable') { + $tag = 'table'; + $table_type = 'v'; + } + # special cases + if ($tag eq 'top' || ($tag eq 'node' && /^\@node\s+top\s*,/i)) { + $in_top = 1; + @lines = (); # ignore all lines before top (title page garbage) + next; + } elsif ($tag eq 'node') { + $in_top = 0; + warn "$ERROR Bad node line: $_" unless $_ =~ /^\@node\s$NODESRE$/o; + $_ = &protect_html($_); # if node contains '&' for instance + s/^\@node\s+//; + ($node) = split(/,/); + &normalise_node($node); + if ($split_node) { + &next_doc; + push(@lines, $SPLITTAG) if $split_num++; + push(@sections, $node); + } + next; + } elsif ($tag eq 'include') { + if (/^\@include\s+($FILERE)\s*$/o) { + $file = $1; + unless (-e $file) { + foreach $dir (@include_dirs) { + $file = "$dir/$1"; + last if -e $file; + } + } + if (-e $file) { + &open($file); + print "# including $file\n" if $verbose; + } else { + warn "$ERROR Can't find $file, skipping"; + } + } else { + warn "$ERROR Bad include line: $_"; + } + next; + } elsif ($tag eq 'ifclear') { + if (/^\@ifclear\s+($VARRE)\s*$/o) { + next unless defined($value{$1}); + &skip_until($tag); + } else { + warn "$ERROR Bad ifclear line: $_"; + } + next; + } elsif ($tag eq 'ifset') { + if (/^\@ifset\s+($VARRE)\s*$/o) { + next if defined($value{$1}); + &skip_until($tag); + } else { + warn "$ERROR Bad ifset line: $_"; + } + next; + } elsif ($tag eq 'menu') { + unless ($show_menu) { + &skip_until($tag); + next; + } + &html_push_if($tag); + push(@lines, &html_debug("\n", __LINE__)); + } elsif ($format_map{$tag}) { + $in_pre = 1 if $format_map{$tag} eq 'PRE'; + &html_push_if($format_map{$tag}); + push(@lines, &html_debug("\n", __LINE__)); + $in_list++ if $format_map{$tag} eq 'UL' || $format_map{$tag} eq 'OL' ; + push(@lines, &debug("<$format_map{$tag}>\n", __LINE__)); + next; + } elsif ($tag eq 'table') { + if (/^\@[fv]?table\s+\@(\w+)\s*$/) { + $in_table = $1; + unshift(@tables, join($;, $table_type, $in_table)); + push(@lines, &debug("<DL COMPACT>\n", __LINE__)); + &html_push_if('DL'); + push(@lines, &html_debug("\n", __LINE__)); + } else { + warn "$ERROR Bad table line: $_"; + } + next; + } elsif ($tag eq 'synindex' || $tag eq 'syncodeindex') { + if (/^\@$tag\s+(\w)\w\s+(\w)\w\s*$/) { + eval("*${1}index = *${2}index"); + } else { + warn "$ERROR Bad syn*index line: $_"; + } + next; + } elsif ($tag eq 'sp') { + push(@lines, &debug("<P>\n", __LINE__)); + next; + } elsif ($tag eq 'setref') { + &protect_html; # if setref contains '&' for instance + if (/^\@$tag\s*{($NODERE)}\s*$/) { + $setref = $1; + $setref =~ s/\s+/ /g; # normalize + $setref =~ s/ $//; + $node2sec{$setref} = $name; + $node2href{$setref} = "$docu_doc#$docid"; + } else { + warn "$ERROR Bad setref line: $_"; + } + next; + } elsif ($tag eq 'defindex' || $tag eq 'defcodeindex') { + if (/^\@$tag\s+(\w\w)\s*$/) { + $valid_index{$1} = 1; + } else { + warn "$ERROR Bad defindex line: $_"; + } + next; + } elsif (defined($def_map{$tag})) { + if ($def_map{$tag}) { + s/^\@$tag\s+//; + $tag = $def_map{$tag}; + $_ = "\@$tag $_"; + $tag =~ s/\s.*//; + } + } elsif (defined($user_sub{$tag})) { + s/^\@$tag\s+//; + $sub = $user_sub{$tag}; + print "# user $tag = $sub, arg: $_" if $debug & $DEBUG_USER; + if (defined(&$sub)) { + chop($_); + &$sub($_); + } else { + warn "$ERROR Bad user sub for $tag: $sub\n"; + } + next; + } + if (defined($def_map{$tag})) { + s/^\@$tag\s+//; + if ($tag =~ /x$/) { + # extra definition line + $tag = $`; + $is_extra = 1; + } else { + $is_extra = 0; + } + while (/\{([^\{\}]*)\}/) { + # this is a {} construct + ($before, $contents, $after) = ($`, $1, $'); + # protect spaces + $contents =~ s/\s+/$;9/g; + # restore $_ protecting {} + $_ = "$before$;7$contents$;8$after"; + } + @args = split(/\s+/, &protect_html($_)); + foreach (@args) { + s/$;9/ /g; # unprotect spaces + s/$;7/\{/g; # ... { + s/$;8/\}/g; # ... } + } + $type = shift(@args); + $type =~ s/^\{(.*)\}$/$1/; + print "# def ($tag): {$type} ", join(', ', @args), "\n" + if $debug & $DEBUG_DEF; + $type .= ':'; # it's nicer like this + $name = shift(@args); + $name =~ s/^\{(.*)\}$/$1/; + if ($is_extra) { + $_ = &debug("<DT>", __LINE__); + } else { + $_ = &debug("<DL>\n<DT>", __LINE__); + } + if ($tag eq 'deffn' || $tag eq 'defvr' || $tag eq 'deftp') { + $_ .= "<U>$type</U> <B>$name</B>"; + $_ .= " <I>@args</I>" if @args; + } elsif ($tag eq 'deftypefn' || $tag eq 'deftypevr' + || $tag eq 'defcv' || $tag eq 'defop') { + $ftype = $name; + $name = shift(@args); + $name =~ s/^\{(.*)\}$/$1/; + $_ .= "<U>$type</U> $ftype <B>$name</B>"; + $_ .= " <I>@args</I>" if @args; + } else { + warn "$ERROR Unknown definition type: $tag\n"; + $_ .= "<U>$type</U> <B>$name</B>"; + $_ .= " <I>@args</I>" if @args; + } + $_ .= &debug("\n<DD>", __LINE__); + $name = &unprotect_html($name); + if ($tag eq 'deffn' || $tag eq 'deftypefn') { + unshift(@input_spool, "\@findex $name\n"); + } elsif ($tag eq 'defop') { + unshift(@input_spool, "\@findex $name on $ftype\n"); + } elsif ($tag eq 'defvr' || $tag eq 'deftypevr' || $tag eq 'defcv') { + unshift(@input_spool, "\@vindex $name\n"); + } else { + unshift(@input_spool, "\@tindex $name\n"); + } + $dont_html = 1; + } + } elsif ($end_tag) { + if ($format_map{$end_tag}) { + $in_pre = 0 if $format_map{$end_tag} eq 'PRE'; + $in_list-- if $format_map{$end_tag} eq 'UL' || $format_map{$end_tag} eq 'OL' ; + &html_pop_if('LI', 'P'); + &html_pop_if(); + push(@lines, &debug("</$format_map{$end_tag}>\n", __LINE__)); + push(@lines, &html_debug("\n", __LINE__)); + } elsif ($end_tag eq 'table' || + $end_tag eq 'ftable' || + $end_tag eq 'vtable') { + shift(@tables); + if (@tables) { + ($table_type, $in_table) = split($;, $tables[0]); + } else { + $in_table = 0; + } + push(@lines, "</DL>\n"); + &html_pop_if('DD'); + &html_pop_if(); + } elsif (defined($def_map{$end_tag})) { + push(@lines, &debug("</DL>\n", __LINE__)); + } elsif ($end_tag eq 'menu') { + &html_pop_if(); + push(@lines, $_); # must keep it for pass 2 + } + next; + } + # + # misc things + # + # protect texi and HTML things + &protect_texi; + $_ = &protect_html($_) unless $dont_html; + $dont_html = 0; + # substitution (unsupported things) + s/^\@center\s+//g; + s/^\@exdent\s+//g; + s/\@noindent\s+//g; + s/\@refill\s+//g; + # other substitutions + &simple_substitutions; + s/\@value{($VARRE)}/$value{$1}/eg; + s/\@footnote\{/\@footnote$docu_doc\{/g; # mark footnotes, cf. pass 4 + # + # analyze the tag again + # + if ($tag) { + if (defined($sec2level{$tag}) && $sec2level{$tag} > 0) { + if (/^\@$tag\s+(.+)$/) { + $name = $1; + $name =~ s/\s+$//; + $level = $sec2level{$tag}; + $name = &update_sec_num($tag, $level) . " $name" + if $number_sections && $tag !~ /^unnumbered/; + if ($tag =~ /heading$/) { + push(@lines, &html_debug("\n", __LINE__)); + if ($html_element ne 'body') { + # We are in a nice pickle here. We are trying to get a H? heading + # even though we are not in the body level. So, we convert it to a + # nice, bold, line by itself. + $_ = &debug("\n\n<P><STRONG>$name</STRONG></P>\n\n", __LINE__); + } else { + $_ = &debug("<H$level>$name</H$level>\n", __LINE__); + &html_push_if('body'); + } + print "# heading, section $name, level $level\n" + if $debug & $DEBUG_TOC; + } else { + if ($split_chapter) { + unless ($toplevel) { + # first time we see a "section" + unless ($level == 1) { + warn "$ERROR The first section found is not of level 1: $_"; + warn "$ERROR I'll split on sections of level $level...\n"; + } + $toplevel = $level; + } + if ($level == $toplevel) { + &next_doc; + push(@lines, $SPLITTAG) if $split_num++; + push(@sections, $name); + } + } + $sec_num++; + $docid = "SEC$sec_num"; + $tocid = "TOC$sec_num"; + # check biblio and glossary + $in_bibliography = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*bibliography$/i); + $in_glossary = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*glossary$/i); + # check node + if ($node) { + if ($node2sec{$node}) { + warn "$ERROR Duplicate node found: $node\n"; + } else { + $node2sec{$node} = $name; + $node2href{$node} = "$docu_doc#$docid"; + print "# node $node, section $name, level $level\n" + if $debug & $DEBUG_TOC; + } + $node = ''; + } else { + print "# no node, section $name, level $level\n" + if $debug & $DEBUG_TOC; + } + # update TOC + while ($level > $curlevel) { + $curlevel++; + push(@toc_lines, "<UL>\n"); + } + while ($level < $curlevel) { + $curlevel--; + push(@toc_lines, "</UL>\n"); + } + $_ = "<LI>" . &anchor($tocid, "$docu_doc#$docid", $name, 1); + push(@toc_lines, &substitute_style($_)); + # update DOC + push(@lines, &html_debug("\n", __LINE__)); + &html_reset; + $_ = "<H$level>".&anchor($docid, "$docu_toc#$tocid", $name)."</H$level>\n"; + $_ = &debug($_, __LINE__); + push(@lines, &html_debug("\n", __LINE__)); + } + # update DOC + foreach $line (split(/\n+/, $_)) { + push(@lines, "$line\n"); + } + next; + } else { + warn "$ERROR Bad section line: $_"; + } + } else { + # track variables + $value{$1} = $2, next if /^\@set\s+($VARRE)\s+(.*)$/o; + delete $value{$1}, next if /^\@clear\s+($VARRE)\s*$/o; + # store things + $value{'_setfilename'} = $1, next if /^\@setfilename\s+(.*)$/; + $value{'_settitle'} = $1, next if /^\@settitle\s+(.*)$/; + $value{'_author'} .= "$1\n", next if /^\@author\s+(.*)$/; + $value{'_subtitle'} .= "$1\n", next if /^\@subtitle\s+(.*)$/; + $value{'_title'} .= "$1\n", next if /^\@title\s+(.*)$/; + # index + if (/^\@(..?)index\s+/) { + unless ($valid_index{$1}) { + warn "$ERROR Undefined index command: $_"; + next; + } + $id = 'IDX' . ++$idx_num; + $index = $1 . 'index'; + $what = &substitute_style($'); + $what =~ s/\s+$//; + print "# found $index for '$what' id $id\n" + if $debug & $DEBUG_INDEX; + eval(<<EOC); + if (defined(\$$index\{\$what\})) { + \$$index\{\$what\} .= "$;$docu_doc#$id"; + } else { + \$$index\{\$what\} = "$docu_doc#$id"; + } +EOC + # + # dirty hack to see if I can put an invisible anchor... + # + if ($html_element eq 'P' || + $html_element eq 'LI' || + $html_element eq 'DT' || + $html_element eq 'DD' || + $html_element eq 'ADDRESS' || + $html_element eq 'B' || + $html_element eq 'BLOCKQUOTE' || + $html_element eq 'PRE' || + $html_element eq 'SAMP') { + push(@lines, &anchor($id, '', $invisible_mark, !$in_pre)); + } elsif ($html_element eq 'body') { + push(@lines, &debug("<P>\n", __LINE__)); + push(@lines, &anchor($id, '', $invisible_mark, !$in_pre)); + &html_push('P'); + } elsif ($html_element eq 'DL' || + $html_element eq 'UL' || + $html_element eq 'OL' ) { + $deferred_ref .= &anchor($id, '', $invisible_mark, !$in_pre) . " "; + } + next; + } + # list item + if (/^\@itemx?\s+/) { + $what = $'; + $what =~ s/\s+$//; + if ($in_bibliography && $use_bibliography) { + if ($what =~ /^$BIBRE$/o) { + $id = 'BIB' . ++$bib_num; + $bib2href{$what} = "$docu_doc#$id"; + print "# found bibliography for '$what' id $id\n" + if $debug & $DEBUG_BIB; + $what = &anchor($id, '', $what); + } + } elsif ($in_glossary && $use_glossary) { + $id = 'GLOSS' . ++$gloss_num; + $entry = $what; + $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; + $gloss2href{$entry} = "$docu_doc#$id"; + print "# found glossary for '$entry' id $id\n" + if $debug & $DEBUG_GLOSS; + $what = &anchor($id, '', $what); + } + &html_pop_if('P'); + if ($html_element eq 'DL' || $html_element eq 'DD') { + if ($things_map{$in_table} && !$what) { + # special case to allow @table @bullet for instance + push(@lines, &debug("<DT>$things_map{$in_table}\n", __LINE__)); + } else { + push(@lines, &debug("<DT>\@$in_table\{$what\}\n", __LINE__)); + } + push(@lines, "<DD>"); + &html_push('DD') unless $html_element eq 'DD'; + if ($table_type) { # add also an index + unshift(@input_spool, "\@${table_type}index $what\n"); + } + } else { + push(@lines, &debug("<LI>$what\n", __LINE__)); + &html_push('LI') unless $html_element eq 'LI'; + } + push(@lines, &html_debug("\n", __LINE__)); + if ($deferred_ref) { + push(@lines, &debug("$deferred_ref\n", __LINE__)); + $deferred_ref = ''; + } + next; + } + } + } + # paragraph separator + if ($_ eq "\n") { + next if $#lines >= 0 && $lines[$#lines] eq "\n"; + if ($html_element eq 'P') { + push(@lines, "\n"); + $_ = &debug("</P>\n", __LINE__); + &html_pop; + } + } elsif ($html_element eq 'body' || $html_element eq 'BLOCKQUOTE') { + push(@lines, "<P>\n"); + &html_push('P'); + $_ = &debug($_, __LINE__); + } + # otherwise + push(@lines, $_); +} + +# finish TOC +$level = 0; +while ($level < $curlevel) { + $curlevel--; + push(@toc_lines, "</UL>\n"); +} + +print "# end of pass 1\n" if $verbose; + +#+++############################################################################ +# # +# Pass 2/3: handle style, menu, index, cross-reference # +# # +#---############################################################################ + +@lines2 = (); # whole document (2nd pass) +@lines3 = (); # whole document (3rd pass) +$in_menu = 0; # am I inside a menu + +while (@lines) { + $_ = shift(@lines); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@lines2, $_); + next; + } + # + # menu + # + $in_menu = 1, push(@lines2, &debug("<UL>\n", __LINE__)), next if /^\@menu\b/; + $in_menu = 0, push(@lines2, &debug("</UL>\n", __LINE__)), next if /^\@end\s+menu\b/; + if ($in_menu) { + if (/^\*\s+($NODERE)::/o) { + $descr = $'; + chop($descr); + &menu_entry($1, $1, $descr); + } elsif (/^\*\s+(.+):\s+([^\t,\.\n]+)[\t,\.\n]/) { + $descr = $'; + chop($descr); + &menu_entry($1, $2, $descr); + } elsif (/^\*/) { + warn "$ERROR Bad menu line: $_"; + } else { # description continued? + push(@lines2, $_); + } + next; + } + # + # printindex + # + if (/^\@printindex\s+(\w\w)\b/) { + local($index, *ary, @keys, $key, $letter, $last_letter, @refs); + if ($predefined_index{$1}) { + $index = $predefined_index{$1} . 'index'; + } else { + $index = $1 . 'index'; + } + eval("*ary = *$index"); + @keys = keys(%ary); + foreach $key (@keys) { + $_ = $key; + 1 while s/<(\w+)>\`(.*)\'<\/\1>/$2/; # remove HTML tags with quotes + 1 while s/<(\w+)>(.*)<\/\1>/$2/; # remove HTML tags + $_ = &unprotect_html($_); + &unprotect_texi; + tr/A-Z/a-z/; # lowercase + $key2alpha{$key} = $_; + print "# index $key sorted as $_\n" + if $key ne $_ && $debug & $DEBUG_INDEX; + } + $last_letter = undef; + foreach $key (sort byalpha @keys) { + $letter = substr($key2alpha{$key}, 0, 1); + $letter = substr($key2alpha{$key}, 0, 2) if $letter eq $;; + if (!defined($last_letter) || $letter ne $last_letter) { + push(@lines2, "</DIR>\n") if defined($last_letter); + push(@lines2, "<H2>" . &protect_html($letter) . "</H2>\n"); + push(@lines2, "<DIR>\n"); + $last_letter = $letter; + } + @refs = (); + foreach (split(/$;/, $ary{$key})) { + push(@refs, &anchor('', $_, $key, 0)); + } + push(@lines2, "<LI>" . join(", ", @refs) . "\n"); + } + push(@lines2, "</DIR>\n") if defined($last_letter); + next; + } + # + # simple style substitutions + # + $_ = &substitute_style($_); + # + # xref + # + while (/\@(x|px|info|)ref{($XREFRE)(}?)/o) { + # note: Texinfo may accept other characters + ($type, $nodes, $full) = ($1, $2, $3); + ($before, $after) = ($`, $'); + if (! $full && $after) { + warn "$ERROR Bad xref (no ending } on line): $_"; + $_ = "$before$;0${type}ref\{$nodes$after"; + next; # while xref + } + if ($type eq 'x') { + $type = 'See '; + } elsif ($type eq 'px') { + $type = 'see '; + } elsif ($type eq 'info') { + $type = 'See Info'; + } else { + $type = ''; + } + unless ($full) { + $next = shift(@lines); + $next = &substitute_style($next); + chop($nodes); # remove final newline + if ($next =~ /\}/) { # split on 2 lines + $nodes .= " $`"; + $after = $'; + } else { + $nodes .= " $next"; + $next = shift(@lines); + $next = &substitute_style($next); + chop($nodes); + if ($next =~ /\}/) { # split on 3 lines + $nodes .= " $`"; + $after = $'; + } else { + warn "$ERROR Bad xref (no ending }): $_"; + $_ = "$before$;0xref\{$nodes$after"; + unshift(@lines, $next); + next; # while xref + } + } + } + $nodes =~ s/\s+/ /g; # remove useless spaces + @args = split(/\s*,\s*/, $nodes); + $node = $args[0]; # the node is always the first arg + &normalise_node($node); + $sec = $node2sec{$node}; + if (@args == 5) { # reference to another manual + $sec = $args[2] || $node; + $man = $args[4] || $args[3]; + $_ = "${before}${type}section `$sec' in \@cite{$man}$after"; + } elsif ($type =~ /Info/) { # inforef + warn "$ERROR Wrong number of arguments: $_" unless @args == 3; + ($nn, $_, $in) = @args; + $_ = "${before}${type} file `$in', node `$nn'$after"; + } elsif ($sec) { + $href = $node2href{$node}; + $_ = "${before}${type}section " . &anchor('', $href, $sec) . $after; + } else { + warn "$ERROR Undefined node ($node): $_"; + $_ = "$before$;0xref{$nodes}$after"; + } + } + # + # try to guess bibliography references or glossary terms + # + unless (/^<H\d><A NAME=\"SEC\d/) { + if ($use_bibliography) { + $done = ''; + while (/$BIBRE/o) { + ($pre, $what, $post) = ($`, $&, $'); + $href = $bib2href{$what}; + if (defined($href) && $post !~ /^[^<]*<\/A>/) { + $done .= $pre . &anchor('', $href, $what); + } else { + $done .= "$pre$what"; + } + $_ = $post; + } + $_ = $done . $_; + } + if ($use_glossary) { + $done = ''; + while (/\b\w+\b/) { + ($pre, $what, $post) = ($`, $&, $'); + $entry = $what; + $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; + $href = $gloss2href{$entry}; + if (defined($href) && $post !~ /^[^<]*<\/A>/) { + $done .= $pre . &anchor('', $href, $what); + } else { + $done .= "$pre$what"; + } + $_ = $post; + } + $_ = $done . $_; + } + } + # otherwise + push(@lines2, $_); +} +print "# end of pass 2\n" if $verbose; + +# +# split style substitutions +# +while (@lines2) { + $_ = shift(@lines2); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@lines3, $_); + next; + } + # + # split style substitutions + # + $old = ''; + while ($old ne $_) { + $old = $_; + if (/\@(\w+)\{/) { + ($before, $style, $after) = ($`, $1, $'); + if (defined($style_map{$style})) { + $_ = $after; + $text = ''; + $after = ''; + $failed = 1; + while (@lines2) { + if (/\}/) { + $text .= $`; + $after = $'; + $failed = 0; + last; + } else { + $text .= $_; + $_ = shift(@lines2); + } + } + if ($failed) { + die "* Bad syntax (\@$style) after: $before\n"; + } else { + $text = &apply_style($style, $text); + $_ = "$before$text$after"; + } + } + } + } + # otherwise + push(@lines3, $_); +} +print "# end of pass 3\n" if $verbose; + +#+++############################################################################ +# # +# Pass 4: foot notes, final cleanup # +# # +#---############################################################################ + +@foot_lines = (); # footnotes +@doc_lines = (); # final document +$end_of_para = 0; # true if last line is <P> + +while (@lines3) { + $_ = shift(@lines3); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@doc_lines, $_); + $end_of_para = 0; + next; + } + # + # footnotes + # + while (/\@footnote([^\{\s]+)\{/) { + ($before, $d, $after) = ($`, $1, $'); + $_ = $after; + $text = ''; + $after = ''; + $failed = 1; + while (@lines3) { + if (/\}/) { + $text .= $`; + $after = $'; + $failed = 0; + last; + } else { + $text .= $_; + $_ = shift(@lines3); + } + } + if ($failed) { + die "* Bad syntax (\@footnote) after: $before\n"; + } else { + $foot_num++; + $docid = "DOCF$foot_num"; + $footid = "FOOT$foot_num"; + $foot = "($foot_num)"; + push(@foot_lines, "<H3>" . &anchor($footid, "$d#$docid", $foot) . "</H3>\n"); + $text = "<P>$text" unless $text =~ /^\s*<P>/; + push(@foot_lines, "$text\n"); + $_ = $before . &anchor($docid, "$docu_foot#$footid", $foot) . $after; + } + } + # + # remove unnecessary <P> + # + if (/^\s*<P>\s*$/) { + next if $end_of_para++; + } else { + $end_of_para = 0; + } + # otherwise + push(@doc_lines, $_); +} +print "# end of pass 4\n" if $verbose; + +#+++############################################################################ +# # +# Pass 5: print things # +# # +#---############################################################################ + +$header = <<EOT; +<!-- This HTML file has been created by $THISPROG + from $docu on $TODAY --> +EOT + +$full_title = $value{'_title'} || $value{'_settitle'} || "Untitled Document"; +$title = $value{'_settitle'} || $full_title; +$_ = &substitute_style($full_title); +&unprotect_texi; +s/\n$//; # rmv last \n (if any) +$full_title = "<H1>" . join("</H1>\n<H1>", split(/\n/, $_)) . "</H1>\n"; + +# +# print ToC +# +if (!$monolithic && @toc_lines) { + if (open(FILE, "> $docu_toc")) { + print "# creating $docu_toc...\n" if $verbose; + &print_toplevel_header("$title - Table of Contents"); + &print_ruler; + &print(*toc_lines, FILE); + &print_toplevel_footer; + close(FILE); + } else { + warn "$ERROR Can't write to $docu_toc: $!\n"; + } +} + +# +# print footnotes +# +if (!$monolithic && @foot_lines) { + if (open(FILE, "> $docu_foot")) { + print "# creating $docu_foot...\n" if $verbose; + &print_toplevel_header("$title - Footnotes"); + &print_ruler; + &print(*foot_lines, FILE); + &print_toplevel_footer; + close(FILE); + } else { + warn "$ERROR Can't write to $docu_foot: $!\n"; + } +} + +# +# print document +# +if ($split_chapter || $split_node) { # split + $doc_num = 0; + $last_num = scalar(@sections); + $first_doc = &doc_name(1); + $last_doc = &doc_name($last_num); + while (@sections) { + $section = shift(@sections); + &next_doc; + if (open(FILE, "> $docu_doc")) { + print "# creating $docu_doc...\n" if $verbose; + &print_header("$title - $section"); + $prev_doc = ($doc_num == 1 ? undef : &doc_name($doc_num - 1)); + $next_doc = ($doc_num == $last_num ? undef : &doc_name($doc_num + 1)); + $navigation = "Go to the "; + $navigation .= ($prev_doc ? &anchor('', $first_doc, "first") : "first"); + $navigation .= ", "; + $navigation .= ($prev_doc ? &anchor('', $prev_doc, "previous") : "previous"); + $navigation .= ", "; + $navigation .= ($next_doc ? &anchor('', $next_doc, "next") : "next"); + $navigation .= ", "; + $navigation .= ($next_doc ? &anchor('', $last_doc, "last") : "last"); + $navigation .= " section, " . &anchor('', $docu_toc, "table of contents") . ".\n"; + print FILE $navigation; + &print_ruler; + # find corresponding lines + @tmp_lines = (); + while (@doc_lines) { + $_ = shift(@doc_lines); + last if ($_ eq $SPLITTAG); + push(@tmp_lines, $_); + } + &print(*tmp_lines, FILE); + &print_ruler; + print FILE $navigation; + &print_footer; + close(FILE); + } else { + warn "$ERROR Can't write to $docu_doc: $!\n"; + } + } +} else { # not split + if (open(FILE, "> $docu_doc")) { + print "# creating $docu_doc...\n" if $verbose; + if ($monolithic || !@toc_lines) { + &print_toplevel_header($title); + } else { + &print_header($title); + print FILE $full_title; + } + if ($monolithic && @toc_lines) { + &print_ruler; + print FILE "<H1>Table of Contents</H1>\n"; + &print(*toc_lines, FILE); + } + &print_ruler; + &print(*doc_lines, FILE); + if ($monolithic && @foot_lines) { + &print_ruler; + print FILE "<H1>Footnotes</H1>\n"; + &print(*foot_lines, FILE); + } + if ($monolithic || !@toc_lines) { + &print_toplevel_footer; + } else { + &print_footer; + } + close(FILE); + } else { + warn "$ERROR Can't write to $docu_doc: $!\n"; + } +} + +print "# that's all folks\n" if $verbose; + +#+++############################################################################ +# # +# Low level functions # +# # +#---############################################################################ + +sub update_sec_num { + local($name, $level) = @_; + + $level--; # here we start at 0 + if ($name =~ /^appendix/) { + # appendix style + if (defined(@appendix_sec_num)) { + &incr_sec_num($level, @appendix_sec_num); + } else { + @appendix_sec_num = ('A', 0, 0, 0); + } + return(join('.', @appendix_sec_num[0..$level])); + } else { + # normal style + if (defined(@normal_sec_num)) { + &incr_sec_num($level, @normal_sec_num); + } else { + @normal_sec_num = (1, 0, 0, 0); + } + return(join('.', @normal_sec_num[0..$level])); + } +} + +sub incr_sec_num { + local($level, $l); + $level = shift(@_); + $_[$level]++; + foreach $l ($level+1 .. 3) { + $_[$l] = 0; + } +} + +sub check { + local($_, %seen, %context, $before, $match, $after); + + while (<>) { + if (/\@(\*|\.|\:|\@|\{|\})/) { + $seen{$&}++; + $context{$&} .= "> $_" if $verbose; + $_ = "$`XX$'"; + redo; + } + if (/\@(\w+)/) { + ($before, $match, $after) = ($`, $&, $'); + if ($before =~ /\b[\w-]+$/ && $after =~ /^[\w-.]*\b/) { # e-mail address + $seen{'e-mail address'}++; + $context{'e-mail address'} .= "> $_" if $verbose; + } else { + $seen{$match}++; + $context{$match} .= "> $_" if $verbose; + } + $match =~ s/^\@/X/; + $_ = "$before$match$after"; + redo; + } + } + + foreach (sort(keys(%seen))) { + if ($verbose) { + print "$_\n"; + print $context{$_}; + } else { + print "$_ ($seen{$_})\n"; + } + } +} + +sub open { + local($name) = @_; + + ++$fh_name; + if (open($fh_name, $name)) { + unshift(@fhs, $fh_name); + } else { + warn "$ERROR Can't read file $name: $!\n"; + } +} + +sub init_input { + @fhs = (); # hold the file handles to read + @input_spool = (); # spooled lines to read + $fh_name = 'FH000'; + &open($docu); +} + +sub next_line { + local($fh, $line); + + if (@input_spool) { + $line = shift(@input_spool); + return($line); + } + while (@fhs) { + $fh = $fhs[0]; + $line = <$fh>; + return($line) if $line; + close($fh); + shift(@fhs); + } + return(undef); +} + +# used in pass 1, use &next_line +sub skip_until { + local($tag) = @_; + local($_); + + while ($_ = &next_line) { + return if /^\@end\s+$tag\s*$/; + } + die "* Failed to find '$tag' after: " . $lines[$#lines]; +} + +# +# HTML stacking to have a better HTML output +# + +sub html_reset { + @html_stack = ('html'); + $html_element = 'body'; +} + +sub html_push { + local($what) = @_; + push(@html_stack, $html_element); + $html_element = $what; +} + +sub html_push_if { + local($what) = @_; + push(@html_stack, $html_element) + if ($html_element && $html_element ne 'P'); + $html_element = $what; +} + +sub html_pop { + $html_element = pop(@html_stack); +} + +sub html_pop_if { + local($elt); + + if (@_) { + foreach $elt (@_) { + if ($elt eq $html_element) { + $html_element = pop(@html_stack) if @html_stack; + last; + } + } + } else { + $html_element = pop(@html_stack) if @html_stack; + } +} + +sub html_debug { + local($what, $line) = @_; + return("<!-- $line @html_stack, $html_element -->$what") + if $debug & $DEBUG_HTML; + return($what); +} + +# to debug the output... +sub debug { + local($what, $line) = @_; + return("<!-- $line -->$what") + if $debug & $DEBUG_HTML; + return($what); +} + +sub normalise_node { + $_[0] =~ s/\s+/ /g; + $_[0] =~ s/ $//; + $_[0] =~ s/^ //; +} + +sub menu_entry { + local($entry, $node, $descr) = @_; + local($href); + + &normalise_node($node); + $href = $node2href{$node}; + if ($href) { + $descr =~ s/^\s+//; + $descr = ": $descr" if $descr; + push(@lines2, "<LI>" . &anchor('', $href, $entry) . "$descr\n"); + } else { + warn "$ERROR Undefined node ($node): $_"; + } +} + +sub do_ctrl { "^$_[0]" } + +sub do_sc { "\U$_[0]\E" } + +sub apply_style { + local($texi_style, $text) = @_; + local($style); + + $style = $style_map{$texi_style}; + if (defined($style)) { # known style + if ($style =~ /^\"/) { # add quotes + $style = $'; + $text = "\`$text\'"; + } + if ($style =~ /^\&/) { # custom + $style = $'; + $text = &$style($text); + } elsif ($style) { # good style + $text = "<$style>$text</$style>"; + } else { # no style + } + } else { # unknown style + $text = undef; + } + return($text); +} + +# remove Texinfo styles +sub remove_style { + local($_) = @_; + s/\@\w+{([^\{\}]+)}/$1/g; + return($_); +} + +sub substitute_style { + local($_) = @_; + local($changed, $done, $style, $text); + + $changed = 1; + while ($changed) { + $changed = 0; + $done = ''; + while (/\@(\w+){([^\{\}]+)}/) { + $text = &apply_style($1, $2); + if ($text) { + $_ = "$`$text$'"; + $changed = 1; + } else { + $done .= "$`\@$1"; + $_ = "{$2}$'"; + } + } + $_ = $done . $_; + } + return($_); +} + +sub anchor { + local($name, $href, $text, $newline) = @_; + local($result); + + $result = "<A"; + $result .= " NAME=\"$name\"" if $name; + $result .= " HREF=\"$href\"" if $href; + $result .= ">$text</A>"; + $result .= "\n" if $newline; + return($result); +} + +sub pretty_date { + local(@MoY, $sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst); + + @MoY = ('January', 'Febuary', 'March', 'April', 'May', 'June', + 'July', 'August', 'September', 'October', 'November', 'December'); + ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time); + $year += ($year < 70) ? 2000 : 1900; + return("$mday $MoY[$mon] $year"); +} + +sub doc_name { + local($num) = @_; + + return("${docu_name}_$num.html"); +} + +sub next_doc { + $docu_doc = &doc_name(++$doc_num); +} + +sub print { + local(*lines, $fh) = @_; + local($_); + + while (@lines) { + $_ = shift(@lines); + if (/^$PROTECTTAG/o) { + $_ = $tag2pro{$_}; + } else { + &unprotect_texi; + } + print $fh $_; + } +} + +sub print_ruler { + print FILE "<P><HR><P>\n"; +} + +sub print_header { + local($_); + + # clean the title + $_ = &remove_style($_[0]); + &unprotect_texi; + # print the header + if ($doctype eq 'html2') { + print FILE $html2_doctype; + } elsif ($doctype) { + print FILE $doctype; + } + print FILE <<EOT; +<HTML> +<HEAD> +$header +<TITLE>$_</TITLE> +</HEAD> +<BODY> +EOT +} + +sub print_toplevel_header { + local($_); + + &print_header; # pass given arg... + print FILE $full_title; + if ($value{'_subtitle'}) { + $value{'_subtitle'} =~ s/\n+$//; + foreach (split(/\n/, $value{'_subtitle'})) { + $_ = &substitute_style($_); + &unprotect_texi; + print FILE "<H2>$_</H2>\n"; + } + } + if ($value{'_author'}) { + $value{'_author'} =~ s/\n+$//; + foreach (split(/\n/, $value{'_author'})) { + $_ = &substitute_style($_); + &unprotect_texi; + s/[\w.-]+\@[\w.-]+/<A HREF="mailto:$&">$&<\/A>/g; + print FILE "<ADDRESS>$_</ADDRESS>\n"; + } + } + print FILE "<P>\n"; +} + +sub print_footer { + print FILE <<EOT; +</BODY> +</HTML> +EOT +} + +sub print_toplevel_footer { + &print_ruler; + print FILE <<EOT; +This document was generated on $TODAY using the +<A HREF=\"$HOMEPAGE\">texi2html</A> +translator version 1.51.</P> +EOT + &print_footer; +} + +sub protect_texi { + # protect @ { } ` ' + s/\@\@/$;0/go; + s/\@\{/$;1/go; + s/\@\}/$;2/go; + s/\@\`/$;3/go; + s/\@\'/$;4/go; +} + +sub protect_html { + local($what) = @_; + # protect & < > + $what =~ s/\&/\&\#38;/g; + $what =~ s/\</\&\#60;/g; + $what =~ s/\>/\&\#62;/g; + # but recognize some HTML things + $what =~ s/\&\#60;\/A\&\#62;/<\/A>/g; # </A> + $what =~ s/\&\#60;A ([^\&]+)\&\#62;/<A $1>/g; # <A [^&]+> + $what =~ s/\&\#60;IMG ([^\&]+)\&\#62;/<IMG $1>/g; # <IMG [^&]+> + return($what); +} + +sub unprotect_texi { + s/$;0/\@/go; + s/$;1/\{/go; + s/$;2/\}/go; + s/$;3/\`/go; + s/$;4/\'/go; +} + +sub unprotect_html { + local($what) = @_; + $what =~ s/\&\#38;/\&/g; + $what =~ s/\&\#60;/\</g; + $what =~ s/\&\#62;/\>/g; + return($what); +} + +sub byalpha { + $key2alpha{$a} cmp $key2alpha{$b}; +} + +############################################################################## + + # These next few lines are legal in both Perl and nroff. + +.00 ; # finish .ig + +'di \" finish diversion--previous line must be blank +.nr nl 0-1 \" fake up transition to first page again +.nr % 0 \" start at page 1 +'; __END__ ############# From here on it's a standard manual page ############ +.TH TEXI2HTML 1 "09/10/96" +.AT 3 +.SH NAME +texi2html \- a Texinfo to HTML converter +.SH SYNOPSIS +.B texi2html [options] file +.PP +.B texi2html -check [-verbose] files +.SH DESCRIPTION +.I Texi2html +converts the given Texinfo file to a set of HTML files. It tries to handle +most of the Texinfo commands. It creates hypertext links for cross-references, +footnotes... +.PP +It also tries to add links from a reference to its corresponding entry in the +bibliography (if any). It may also handle a glossary (see the +.B \-glossary +option). +.PP +.I Texi2html +creates several files depending on the contents of the Texinfo file and on +the chosen options (see FILES). +.PP +The HTML files created by +.I texi2html +are closer to TeX than to Info, that's why +.I texi2html +converts @iftex sections and not @ifinfo ones by default. You can reverse +this with the \-expandinfo option. +.SH OPTIONS +.TP 12 +.B \-check +Check the given file and give the list of all things that may be Texinfo commands. +This may be used to check the output of +.I texi2html +to find the Texinfo commands that have been left in the HTML file. +.TP +.B \-expandinfo +Expand @ifinfo sections, not @iftex ones. +.TP +.B \-glossary +Use the section named 'Glossary' to build a list of terms and put links in the HTML +document from each term toward its definition. +.TP +.B \-invisible \fIname\fP +Use \fIname\fP to create invisible destination anchors for index links. This is a workaround +for a known bug of many WWW browsers, including xmosaic. +.TP +.B \-I \fIdir\fP +Look also in \fIdir\fP to find included files. +.TP +.B \-menu +Show the Texinfo menus; by default they are ignored. +.TP +.B \-monolithic +Output only one file, including the table of contents and footnotes. +.TP +.B \-number +Number the sections. +.TP +.B \-split_chapter +Split the output into several HTML files (one per main section: +chapter, appendix...). +.TP +.B \-split_node +Split the output into several HTML files (one per node). +.TP +.B \-usage +Print usage instructions, listing the current available command-line options. +.TP +.B \-verbose +Give a verbose output. Can be used with the +.B \-check +option. +.PP +.SH FILES +By default +.I texi2html +creates the following files (foo being the name of the Texinfo file): +.TP 16 +.B foo_toc.html +The table of contents. +.TP +.B foo.html +The document's contents. +.TP +.B foo_foot.html +The footnotes (if any). +.PP +When used with the +.B \-split +option, it creates several files (one per chapter or node), named +.B foo_n.html +(n being the indice of the chapter or node), instead of the single +.B foo.html +file. +.PP +When used with the +.B \-monolithic +option, it creates only one file: +.B foo.html +.SH VARIABLES +.I texi2html +predefines the following variables: \fBhtml\fP, \fBtexi2html\fP. +.SH ADDITIONAL COMMANDS +.I texi2html +implements the following non-Texinfo commands: +.TP 16 +.B @ifhtml +This indicates the start of an HTML section, this section will passed through +without any modofication. +.TP +.B @end ifhtml +This indcates the end of an HTML section. +.SH VERSION +This is \fItexi2html\fP version 1.51, 09/10/96. +.PP +The latest version of \fItexi2html\fP can be found in WWW, cf. URL +http://wwwcn.cern.ch/dci/texi2html/ +.SH AUTHOR +The main author is Lionel Cons, CERN CN/DCI/UWS, Lionel.Cons@cern.ch. +Many other people around the net contributed to this program. +.SH COPYRIGHT +This program is the intellectual property of the European +Laboratory for Particle Physics (known as CERN). No guarantee whatsoever is +provided by CERN. No liability whatsoever is accepted for any loss or damage +of any kind resulting from any defect or inaccuracy in this information or +code. +.PP +CERN, 1211 Geneva 23, Switzerland +.SH "SEE ALSO" +GNU Texinfo Documentation Format, +HyperText Markup Language (HTML), +World Wide Web (WWW). +.SH BUGS +This program does not understand all Texinfo commands (yet). +.PP +TeX specific commands (normally enclosed in @iftex) will be +passed unmodified. +.ex diff --git a/readline/emacs_keymap.c b/readline/emacs_keymap.c new file mode 100644 index 00000000000..4ba385843f6 --- /dev/null +++ b/readline/emacs_keymap.c @@ -0,0 +1,885 @@ +/* emacs_keymap.c -- the keymap for emacs_mode in readline (). */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (BUFSIZ) +#include <stdio.h> +#endif /* !BUFSIZ */ + +#include "readline.h" + +/* An array of function pointers, one for each possible key. + If the type byte is ISKMAP, then the pointer is the address of + a keymap. */ + +KEYMAP_ENTRY_ARRAY emacs_standard_keymap = { + + /* Control keys. */ + { ISFUNC, rl_set_mark }, /* Control-@ */ + { ISFUNC, rl_beg_of_line }, /* Control-a */ + { ISFUNC, rl_backward }, /* Control-b */ + { ISFUNC, (Function *)0x0 }, /* Control-c */ + { ISFUNC, rl_delete }, /* Control-d */ + { ISFUNC, rl_end_of_line }, /* Control-e */ + { ISFUNC, rl_forward }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, rl_rubout }, /* Control-h */ + { ISFUNC, rl_complete }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, rl_clear_screen }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_get_next_history }, /* Control-n */ + { ISFUNC, (Function *)0x0 }, /* Control-o */ + { ISFUNC, rl_get_previous_history }, /* Control-p */ + { ISFUNC, rl_quoted_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_unix_word_rubout }, /* Control-w */ + { ISKMAP, (Function *)emacs_ctlx_keymap }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, (Function *)0x0 }, /* Control-z */ + { ISKMAP, (Function *)emacs_meta_keymap }, /* Control-[ */ + { ISFUNC, (Function *)0x0 }, /* Control-\ */ + { ISFUNC, rl_char_search }, /* Control-] */ + { ISFUNC, (Function *)0x0 }, /* Control-^ */ + { ISFUNC, rl_undo_command }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_insert }, /* SPACE */ + { ISFUNC, rl_insert }, /* ! */ + { ISFUNC, rl_insert }, /* " */ + { ISFUNC, rl_insert }, /* # */ + { ISFUNC, rl_insert }, /* $ */ + { ISFUNC, rl_insert }, /* % */ + { ISFUNC, rl_insert }, /* & */ + { ISFUNC, rl_insert }, /* ' */ + { ISFUNC, rl_insert }, /* ( */ +#if defined (PAREN_MATCHING) + { ISFUNC, rl_insert_close }, /* ) */ +#else + { ISFUNC, rl_insert }, /* ) */ +#endif /* !PAREN_MATCHING */ + { ISFUNC, rl_insert }, /* * */ + { ISFUNC, rl_insert }, /* + */ + { ISFUNC, rl_insert }, /* , */ + { ISFUNC, rl_insert }, /* - */ + { ISFUNC, rl_insert }, /* . */ + { ISFUNC, rl_insert }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_insert }, /* 0 */ + { ISFUNC, rl_insert }, /* 1 */ + { ISFUNC, rl_insert }, /* 2 */ + { ISFUNC, rl_insert }, /* 3 */ + { ISFUNC, rl_insert }, /* 4 */ + { ISFUNC, rl_insert }, /* 5 */ + { ISFUNC, rl_insert }, /* 6 */ + { ISFUNC, rl_insert }, /* 7 */ + { ISFUNC, rl_insert }, /* 8 */ + { ISFUNC, rl_insert }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, rl_insert }, /* : */ + { ISFUNC, rl_insert }, /* ; */ + { ISFUNC, rl_insert }, /* < */ + { ISFUNC, rl_insert }, /* = */ + { ISFUNC, rl_insert }, /* > */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_insert }, /* A */ + { ISFUNC, rl_insert }, /* B */ + { ISFUNC, rl_insert }, /* C */ + { ISFUNC, rl_insert }, /* D */ + { ISFUNC, rl_insert }, /* E */ + { ISFUNC, rl_insert }, /* F */ + { ISFUNC, rl_insert }, /* G */ + { ISFUNC, rl_insert }, /* H */ + { ISFUNC, rl_insert }, /* I */ + { ISFUNC, rl_insert }, /* J */ + { ISFUNC, rl_insert }, /* K */ + { ISFUNC, rl_insert }, /* L */ + { ISFUNC, rl_insert }, /* M */ + { ISFUNC, rl_insert }, /* N */ + { ISFUNC, rl_insert }, /* O */ + { ISFUNC, rl_insert }, /* P */ + { ISFUNC, rl_insert }, /* Q */ + { ISFUNC, rl_insert }, /* R */ + { ISFUNC, rl_insert }, /* S */ + { ISFUNC, rl_insert }, /* T */ + { ISFUNC, rl_insert }, /* U */ + { ISFUNC, rl_insert }, /* V */ + { ISFUNC, rl_insert }, /* W */ + { ISFUNC, rl_insert }, /* X */ + { ISFUNC, rl_insert }, /* Y */ + { ISFUNC, rl_insert }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_insert }, /* [ */ + { ISFUNC, rl_insert }, /* \ */ +#if defined (PAREN_MATCHING) + { ISFUNC, rl_insert_close }, /* ] */ +#else + { ISFUNC, rl_insert }, /* ] */ +#endif /* !PAREN_MATCHING */ + { ISFUNC, rl_insert }, /* ^ */ + { ISFUNC, rl_insert }, /* _ */ + { ISFUNC, rl_insert }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_insert }, /* a */ + { ISFUNC, rl_insert }, /* b */ + { ISFUNC, rl_insert }, /* c */ + { ISFUNC, rl_insert }, /* d */ + { ISFUNC, rl_insert }, /* e */ + { ISFUNC, rl_insert }, /* f */ + { ISFUNC, rl_insert }, /* g */ + { ISFUNC, rl_insert }, /* h */ + { ISFUNC, rl_insert }, /* i */ + { ISFUNC, rl_insert }, /* j */ + { ISFUNC, rl_insert }, /* k */ + { ISFUNC, rl_insert }, /* l */ + { ISFUNC, rl_insert }, /* m */ + { ISFUNC, rl_insert }, /* n */ + { ISFUNC, rl_insert }, /* o */ + { ISFUNC, rl_insert }, /* p */ + { ISFUNC, rl_insert }, /* q */ + { ISFUNC, rl_insert }, /* r */ + { ISFUNC, rl_insert }, /* s */ + { ISFUNC, rl_insert }, /* t */ + { ISFUNC, rl_insert }, /* u */ + { ISFUNC, rl_insert }, /* v */ + { ISFUNC, rl_insert }, /* w */ + { ISFUNC, rl_insert }, /* x */ + { ISFUNC, rl_insert }, /* y */ + { ISFUNC, rl_insert }, /* z */ + + /* Final punctuation. */ + { ISFUNC, rl_insert }, /* { */ + { ISFUNC, rl_insert }, /* | */ +#if defined (PAREN_MATCHING) + { ISFUNC, rl_insert_close }, /* } */ +#else + { ISFUNC, rl_insert }, /* } */ +#endif /* !PAREN_MATCHING */ + { ISFUNC, rl_insert }, /* ~ */ + { ISFUNC, rl_rubout }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Pure 8-bit characters (128 - 159). + These might be used in some + character sets. */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + + /* ISO Latin-1 characters (160 - 255) */ + { ISFUNC, rl_insert }, /* No-break space */ + { ISFUNC, rl_insert }, /* Inverted exclamation mark */ + { ISFUNC, rl_insert }, /* Cent sign */ + { ISFUNC, rl_insert }, /* Pound sign */ + { ISFUNC, rl_insert }, /* Currency sign */ + { ISFUNC, rl_insert }, /* Yen sign */ + { ISFUNC, rl_insert }, /* Broken bar */ + { ISFUNC, rl_insert }, /* Section sign */ + { ISFUNC, rl_insert }, /* Diaeresis */ + { ISFUNC, rl_insert }, /* Copyright sign */ + { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ + { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Not sign */ + { ISFUNC, rl_insert }, /* Soft hyphen */ + { ISFUNC, rl_insert }, /* Registered sign */ + { ISFUNC, rl_insert }, /* Macron */ + { ISFUNC, rl_insert }, /* Degree sign */ + { ISFUNC, rl_insert }, /* Plus-minus sign */ + { ISFUNC, rl_insert }, /* Superscript two */ + { ISFUNC, rl_insert }, /* Superscript three */ + { ISFUNC, rl_insert }, /* Acute accent */ + { ISFUNC, rl_insert }, /* Micro sign */ + { ISFUNC, rl_insert }, /* Pilcrow sign */ + { ISFUNC, rl_insert }, /* Middle dot */ + { ISFUNC, rl_insert }, /* Cedilla */ + { ISFUNC, rl_insert }, /* Superscript one */ + { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ + { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ + { ISFUNC, rl_insert }, /* Vulgar fraction one half */ + { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ + { ISFUNC, rl_insert }, /* Inverted questionk mark */ + { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin capital letter ae */ + { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Multiplication sign */ + { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ + { ISFUNC, rl_insert }, /* Latin small letter a with grave */ + { ISFUNC, rl_insert }, /* Latin small letter a with acute */ + { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin small letter ae */ + { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin small letter e with grave */ + { ISFUNC, rl_insert }, /* Latin small letter e with acute */ + { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter i with grave */ + { ISFUNC, rl_insert }, /* Latin small letter i with acute */ + { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with grave */ + { ISFUNC, rl_insert }, /* Latin small letter o with acute */ + { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Division sign */ + { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin small letter u with grave */ + { ISFUNC, rl_insert }, /* Latin small letter u with acute */ + { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter y with acute */ + { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ + { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ +#endif /* KEYMAP_SIZE > 128 */ +}; + +KEYMAP_ENTRY_ARRAY emacs_meta_keymap = { + + /* Meta keys. Just like above, but the high bit is set. */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-@ */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-a */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-b */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-c */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-d */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-e */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-f */ + { ISFUNC, rl_abort }, /* Meta-Control-g */ + { ISFUNC, rl_backward_kill_word }, /* Meta-Control-h */ + { ISFUNC, rl_tab_insert }, /* Meta-Control-i */ + { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-j */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-k */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-l */ + { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-m */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-n */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-o */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-p */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-q */ + { ISFUNC, rl_revert_line }, /* Meta-Control-r */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-s */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-t */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-u */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-v */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-w */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-x */ + { ISFUNC, rl_yank_nth_arg }, /* Meta-Control-y */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-z */ + + { ISFUNC, rl_complete }, /* Meta-Control-[ */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-\ */ + { ISFUNC, rl_backward_char_search }, /* Meta-Control-] */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-^ */ + { ISFUNC, (Function *)0x0 }, /* Meta-Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_set_mark }, /* Meta-SPACE */ + { ISFUNC, (Function *)0x0 }, /* Meta-! */ + { ISFUNC, (Function *)0x0 }, /* Meta-" */ + { ISFUNC, rl_insert_comment },/* Meta-# */ + { ISFUNC, (Function *)0x0 }, /* Meta-$ */ + { ISFUNC, (Function *)0x0 }, /* Meta-% */ + { ISFUNC, rl_tilde_expand }, /* Meta-& */ + { ISFUNC, (Function *)0x0 }, /* Meta-' */ + { ISFUNC, (Function *)0x0 }, /* Meta-( */ + { ISFUNC, (Function *)0x0 }, /* Meta-) */ + { ISFUNC, rl_insert_completions }, /* Meta-* */ + { ISFUNC, (Function *)0x0 }, /* Meta-+ */ + { ISFUNC, (Function *)0x0 }, /* Meta-, */ + { ISFUNC, rl_digit_argument }, /* Meta-- */ + { ISFUNC, rl_yank_last_arg}, /* Meta-. */ + { ISFUNC, (Function *)0x0 }, /* Meta-/ */ + + /* Regular digits. */ + { ISFUNC, rl_digit_argument }, /* Meta-0 */ + { ISFUNC, rl_digit_argument }, /* Meta-1 */ + { ISFUNC, rl_digit_argument }, /* Meta-2 */ + { ISFUNC, rl_digit_argument }, /* Meta-3 */ + { ISFUNC, rl_digit_argument }, /* Meta-4 */ + { ISFUNC, rl_digit_argument }, /* Meta-5 */ + { ISFUNC, rl_digit_argument }, /* Meta-6 */ + { ISFUNC, rl_digit_argument }, /* Meta-7 */ + { ISFUNC, rl_digit_argument }, /* Meta-8 */ + { ISFUNC, rl_digit_argument }, /* Meta-9 */ + + /* A little more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* Meta-: */ + { ISFUNC, (Function *)0x0 }, /* Meta-; */ + { ISFUNC, rl_beginning_of_history }, /* Meta-< */ + { ISFUNC, rl_possible_completions }, /* Meta-= */ + { ISFUNC, rl_end_of_history }, /* Meta-> */ + { ISFUNC, rl_possible_completions }, /* Meta-? */ + { ISFUNC, (Function *)0x0 }, /* Meta-@ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-A */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-B */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-C */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-D */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-E */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-F */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-G */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-H */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-I */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-J */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-K */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-L */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-M */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-N */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-O */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-P */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Q */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-R */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-S */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-T */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-U */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-V */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-W */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-X */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Y */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Z */ + + /* Some more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* Meta-[ */ /* was rl_arrow_keys */ + { ISFUNC, rl_delete_horizontal_space }, /* Meta-\ */ + { ISFUNC, (Function *)0x0 }, /* Meta-] */ + { ISFUNC, (Function *)0x0 }, /* Meta-^ */ + { ISFUNC, rl_yank_last_arg }, /* Meta-_ */ + { ISFUNC, (Function *)0x0 }, /* Meta-` */ + + /* Lowercase alphabet. */ + { ISFUNC, (Function *)0x0 }, /* Meta-a */ + { ISFUNC, rl_backward_word }, /* Meta-b */ + { ISFUNC, rl_capitalize_word }, /* Meta-c */ + { ISFUNC, rl_kill_word }, /* Meta-d */ + { ISFUNC, (Function *)0x0 }, /* Meta-e */ + { ISFUNC, rl_forward_word }, /* Meta-f */ + { ISFUNC, (Function *)0x0 }, /* Meta-g */ + { ISFUNC, (Function *)0x0 }, /* Meta-h */ + { ISFUNC, (Function *)0x0 }, /* Meta-i */ + { ISFUNC, (Function *)0x0 }, /* Meta-j */ + { ISFUNC, (Function *)0x0 }, /* Meta-k */ + { ISFUNC, rl_downcase_word }, /* Meta-l */ + { ISFUNC, (Function *)0x0 }, /* Meta-m */ + { ISFUNC, rl_noninc_forward_search }, /* Meta-n */ + { ISFUNC, (Function *)0x0 }, /* Meta-o */ /* was rl_arrow_keys */ + { ISFUNC, rl_noninc_reverse_search }, /* Meta-p */ + { ISFUNC, (Function *)0x0 }, /* Meta-q */ + { ISFUNC, rl_revert_line }, /* Meta-r */ + { ISFUNC, (Function *)0x0 }, /* Meta-s */ + { ISFUNC, rl_transpose_words }, /* Meta-t */ + { ISFUNC, rl_upcase_word }, /* Meta-u */ + { ISFUNC, (Function *)0x0 }, /* Meta-v */ + { ISFUNC, (Function *)0x0 }, /* Meta-w */ + { ISFUNC, (Function *)0x0 }, /* Meta-x */ + { ISFUNC, rl_yank_pop }, /* Meta-y */ + { ISFUNC, (Function *)0x0 }, /* Meta-z */ + + /* Final punctuation. */ + { ISFUNC, (Function *)0x0 }, /* Meta-{ */ + { ISFUNC, (Function *)0x0 }, /* Meta-| */ + { ISFUNC, (Function *)0x0 }, /* Meta-} */ + { ISFUNC, rl_tilde_expand }, /* Meta-~ */ + { ISFUNC, rl_backward_kill_word }, /* Meta-rubout */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; + +KEYMAP_ENTRY_ARRAY emacs_ctlx_keymap = { + + /* Control keys. */ + { ISFUNC, (Function *)0x0 }, /* Control-@ */ + { ISFUNC, (Function *)0x0 }, /* Control-a */ + { ISFUNC, (Function *)0x0 }, /* Control-b */ + { ISFUNC, (Function *)0x0 }, /* Control-c */ + { ISFUNC, (Function *)0x0 }, /* Control-d */ + { ISFUNC, (Function *)0x0 }, /* Control-e */ + { ISFUNC, (Function *)0x0 }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, (Function *)0x0 }, /* Control-h */ + { ISFUNC, (Function *)0x0 }, /* Control-i */ + { ISFUNC, (Function *)0x0 }, /* Control-j */ + { ISFUNC, (Function *)0x0 }, /* Control-k */ + { ISFUNC, (Function *)0x0 }, /* Control-l */ + { ISFUNC, (Function *)0x0 }, /* Control-m */ + { ISFUNC, (Function *)0x0 }, /* Control-n */ + { ISFUNC, (Function *)0x0 }, /* Control-o */ + { ISFUNC, (Function *)0x0 }, /* Control-p */ + { ISFUNC, (Function *)0x0 }, /* Control-q */ + { ISFUNC, rl_re_read_init_file }, /* Control-r */ + { ISFUNC, (Function *)0x0 }, /* Control-s */ + { ISFUNC, (Function *)0x0 }, /* Control-t */ + { ISFUNC, rl_undo_command }, /* Control-u */ + { ISFUNC, (Function *)0x0 }, /* Control-v */ + { ISFUNC, (Function *)0x0 }, /* Control-w */ + { ISFUNC, rl_exchange_point_and_mark },/* Control-x */ + { ISFUNC, (Function *)0x0 }, /* Control-y */ + { ISFUNC, (Function *)0x0 }, /* Control-z */ + { ISFUNC, (Function *)0x0 }, /* Control-[ */ + { ISFUNC, (Function *)0x0 }, /* Control-\ */ + { ISFUNC, (Function *)0x0 }, /* Control-] */ + { ISFUNC, (Function *)0x0 }, /* Control-^ */ + { ISFUNC, (Function *)0x0 }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, (Function *)0x0 }, /* SPACE */ + { ISFUNC, (Function *)0x0 }, /* ! */ + { ISFUNC, (Function *)0x0 }, /* " */ + { ISFUNC, (Function *)0x0 }, /* # */ + { ISFUNC, (Function *)0x0 }, /* $ */ + { ISFUNC, (Function *)0x0 }, /* % */ + { ISFUNC, (Function *)0x0 }, /* & */ + { ISFUNC, (Function *)0x0 }, /* ' */ + { ISFUNC, rl_start_kbd_macro }, /* ( */ + { ISFUNC, rl_end_kbd_macro }, /* ) */ + { ISFUNC, (Function *)0x0 }, /* * */ + { ISFUNC, (Function *)0x0 }, /* + */ + { ISFUNC, (Function *)0x0 }, /* , */ + { ISFUNC, (Function *)0x0 }, /* - */ + { ISFUNC, (Function *)0x0 }, /* . */ + { ISFUNC, (Function *)0x0 }, /* / */ + + /* Regular digits. */ + { ISFUNC, (Function *)0x0 }, /* 0 */ + { ISFUNC, (Function *)0x0 }, /* 1 */ + { ISFUNC, (Function *)0x0 }, /* 2 */ + { ISFUNC, (Function *)0x0 }, /* 3 */ + { ISFUNC, (Function *)0x0 }, /* 4 */ + { ISFUNC, (Function *)0x0 }, /* 5 */ + { ISFUNC, (Function *)0x0 }, /* 6 */ + { ISFUNC, (Function *)0x0 }, /* 7 */ + { ISFUNC, (Function *)0x0 }, /* 8 */ + { ISFUNC, (Function *)0x0 }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* : */ + { ISFUNC, (Function *)0x0 }, /* ; */ + { ISFUNC, (Function *)0x0 }, /* < */ + { ISFUNC, (Function *)0x0 }, /* = */ + { ISFUNC, (Function *)0x0 }, /* > */ + { ISFUNC, (Function *)0x0 }, /* ? */ + { ISFUNC, (Function *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* A */ + { ISFUNC, rl_do_lowercase_version }, /* B */ + { ISFUNC, rl_do_lowercase_version }, /* C */ + { ISFUNC, rl_do_lowercase_version }, /* D */ + { ISFUNC, rl_do_lowercase_version }, /* E */ + { ISFUNC, rl_do_lowercase_version }, /* F */ + { ISFUNC, rl_do_lowercase_version }, /* G */ + { ISFUNC, rl_do_lowercase_version }, /* H */ + { ISFUNC, rl_do_lowercase_version }, /* I */ + { ISFUNC, rl_do_lowercase_version }, /* J */ + { ISFUNC, rl_do_lowercase_version }, /* K */ + { ISFUNC, rl_do_lowercase_version }, /* L */ + { ISFUNC, rl_do_lowercase_version }, /* M */ + { ISFUNC, rl_do_lowercase_version }, /* N */ + { ISFUNC, rl_do_lowercase_version }, /* O */ + { ISFUNC, rl_do_lowercase_version }, /* P */ + { ISFUNC, rl_do_lowercase_version }, /* Q */ + { ISFUNC, rl_do_lowercase_version }, /* R */ + { ISFUNC, rl_do_lowercase_version }, /* S */ + { ISFUNC, rl_do_lowercase_version }, /* T */ + { ISFUNC, rl_do_lowercase_version }, /* U */ + { ISFUNC, rl_do_lowercase_version }, /* V */ + { ISFUNC, rl_do_lowercase_version }, /* W */ + { ISFUNC, rl_do_lowercase_version }, /* X */ + { ISFUNC, rl_do_lowercase_version }, /* Y */ + { ISFUNC, rl_do_lowercase_version }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* [ */ + { ISFUNC, (Function *)0x0 }, /* \ */ + { ISFUNC, (Function *)0x0 }, /* ] */ + { ISFUNC, (Function *)0x0 }, /* ^ */ + { ISFUNC, (Function *)0x0 }, /* _ */ + { ISFUNC, (Function *)0x0 }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, (Function *)0x0 }, /* a */ + { ISFUNC, (Function *)0x0 }, /* b */ + { ISFUNC, (Function *)0x0 }, /* c */ + { ISFUNC, (Function *)0x0 }, /* d */ + { ISFUNC, rl_call_last_kbd_macro }, /* e */ + { ISFUNC, (Function *)0x0 }, /* f */ + { ISFUNC, (Function *)0x0 }, /* g */ + { ISFUNC, (Function *)0x0 }, /* h */ + { ISFUNC, (Function *)0x0 }, /* i */ + { ISFUNC, (Function *)0x0 }, /* j */ + { ISFUNC, (Function *)0x0 }, /* k */ + { ISFUNC, (Function *)0x0 }, /* l */ + { ISFUNC, (Function *)0x0 }, /* m */ + { ISFUNC, (Function *)0x0 }, /* n */ + { ISFUNC, (Function *)0x0 }, /* o */ + { ISFUNC, (Function *)0x0 }, /* p */ + { ISFUNC, (Function *)0x0 }, /* q */ + { ISFUNC, (Function *)0x0 }, /* r */ + { ISFUNC, (Function *)0x0 }, /* s */ + { ISFUNC, (Function *)0x0 }, /* t */ + { ISFUNC, (Function *)0x0 }, /* u */ + { ISFUNC, (Function *)0x0 }, /* v */ + { ISFUNC, (Function *)0x0 }, /* w */ + { ISFUNC, (Function *)0x0 }, /* x */ + { ISFUNC, (Function *)0x0 }, /* y */ + { ISFUNC, (Function *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (Function *)0x0 }, /* { */ + { ISFUNC, (Function *)0x0 }, /* | */ + { ISFUNC, (Function *)0x0 }, /* } */ + { ISFUNC, (Function *)0x0 }, /* ~ */ + { ISFUNC, rl_backward_kill_line }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; diff --git a/readline/examples/Inputrc b/readline/examples/Inputrc new file mode 100644 index 00000000000..5b71bd701c4 --- /dev/null +++ b/readline/examples/Inputrc @@ -0,0 +1,65 @@ +# My ~/.inputrc file is in -*- text -*- for easy editing with Emacs. +# +# Notice the various bindings which are conditionalized depending +# on which program is running, or what terminal is active. +# + +# In all programs, all terminals, make sure this is bound. +"\C-x\C-r": re-read-init-file + +# Hp terminals (and some others) have ugly default behaviour for C-h. +"\C-h": backward-delete-char +"\e\C-h": backward-kill-word +"\C-xd": dump-functions + +# In xterm windows, make the arrow keys do the right thing. +$if TERM=xterm +"\e[A": previous-history +"\e[B": next-history +"\e[C": forward-char +"\e[D": backward-char + +# alternate arrow key prefix +"\eOA": previous-history +"\eOB": next-history +"\eOC": forward-char +"\eOD": backward-char + +# Under Xterm in Bash, we bind local Function keys to do something useful. +$if Bash +"\e[11~": "Function Key 1" +"\e[12~": "Function Key 2" +"\e[13~": "Function Key 3" +"\e[14~": "Function Key 4" +"\e[15~": "Function Key 5" + +# I know the following escape sequence numbers are 1 greater than +# the function key. Don't ask me why, I didn't design the xterm terminal. +"\e[17~": "Function Key 6" +"\e[18~": "Function Key 7" +"\e[19~": "Function Key 8" +"\e[20~": "Function Key 9" +"\e[21~": "Function Key 10" +$endif +$endif + +# For Bash, all terminals, add some Bash specific hacks. +$if Bash +"\C-xv": show-bash-version +"\C-x\C-e": shell-expand-line + +# Here is one for editing my path. +"\C-xp": "$PATH\C-x\C-e\C-e\"\C-aPATH=\":\C-b" + +# Make C-x r read my mail in emacs. +# "\C-xr": "emacs -f rmail\C-j" +$endif + +# For FTP, different hacks: +$if Ftp +"\C-xg": "get \M-?" +"\C-xt": "put \M-?" +"\M-.": yank-last-arg +$endif + +" ": self-insert diff --git a/readline/examples/Makefile.in b/readline/examples/Makefile.in new file mode 100644 index 00000000000..18486736ec9 --- /dev/null +++ b/readline/examples/Makefile.in @@ -0,0 +1,50 @@ +# This is the Makefile for the examples subdirectory of readline. -*- text -*- +# +SHELL = /bin/sh +RM = rm -f + +srcdir = @srcdir@ +VPATH = .:@srcdir@ +top_srcdir = @top_srcdir@ +BUILD_DIR = . + +DEFS = @DEFS@ +CC = @CC@ +CFLAGS = @CFLAGS@ +LOCAL_CFLAGS = @LOCAL_CFLAGS@ +CPPFLAGS = @CPPFLAGS@ + +INCLUDES = -I $(srcdir) -I $(top_srcdir) -I.. + +CCFLAGS = $(DEFS) $(LOCAL_CFLAGS) $(CPPFLAGS) $(INCLUDES) $(CFLAGS) +LDFLAGS = -g -L.. + +TERMCAP_LIB = @TERMCAP_LIB@ + +.c.o: + $(CC) $(CCFLAGS) -c $< + +EXECUTABLES = fileman rltest rl +OBJECTS = fileman.o rltest.o rl.o + +all: $(EXECUTABLES) + +rl: rl.o + $(CC) $(LDFLAGS) -o $@ rl.o -lreadline $(TERMCAP_LIB) + +fileman: fileman.o + $(CC) $(LDFLAGS) -o $@ fileman.o -lreadline $(TERMCAP_LIB) + +rltest: rltest.o + $(CC) $(LDFLAGS) -o $@ rltest.o -lreadline $(TERMCAP_LIB) + +clean mostlyclean: + $(RM) $(OBJECTS) + $(RM) $(EXECUTABLES) + +distclean maintainer-clean: clean + $(RM) Makefile + +fileman.o: fileman.c +rltest.o: rltest.c +rl.o: rl.c diff --git a/readline/examples/fileman.c b/readline/examples/fileman.c new file mode 100644 index 00000000000..0702a5badc7 --- /dev/null +++ b/readline/examples/fileman.c @@ -0,0 +1,450 @@ +/* fileman.c -- A tiny application which demonstrates how to use the + GNU Readline library. This application interactively allows users + to manipulate files and their modes. */ +/* + * Remove the next line if you're compiling this against an installed + * libreadline.a + */ +#define READLINE_LIBRARY + +#ifdef HAVE_CONFIG_H +#include <config.h> +#endif + +#include <sys/types.h> +#ifdef HAVE_SYS_FILE_H +#include <sys/file.h> +#endif +#include <sys/stat.h> + +#include <stdio.h> +#include <errno.h> + +#if defined (HAVE_STRING_H) +# include <string.h> +#else /* !HAVE_STRING_H */ +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#ifdef READLINE_LIBRARY +# include "readline.h" +# include "history.h" +#else +# include <readline/readline.h> +# include <readline/history.h> +#endif + +extern char *getwd (); +extern char *xmalloc (); + +/* The names of functions that actually do the manipulation. */ +int com_list (), com_view (), com_rename (), com_stat (), com_pwd (); +int com_delete (), com_help (), com_cd (), com_quit (); + +/* A structure which contains information on the commands this program + can understand. */ + +typedef struct { + char *name; /* User printable name of the function. */ + Function *func; /* Function to call to do the job. */ + char *doc; /* Documentation for this function. */ +} COMMAND; + +COMMAND commands[] = { + { "cd", com_cd, "Change to directory DIR" }, + { "delete", com_delete, "Delete FILE" }, + { "help", com_help, "Display this text" }, + { "?", com_help, "Synonym for `help'" }, + { "list", com_list, "List files in DIR" }, + { "ls", com_list, "Synonym for `list'" }, + { "pwd", com_pwd, "Print the current working directory" }, + { "quit", com_quit, "Quit using Fileman" }, + { "rename", com_rename, "Rename FILE to NEWNAME" }, + { "stat", com_stat, "Print out statistics on FILE" }, + { "view", com_view, "View the contents of FILE" }, + { (char *)NULL, (Function *)NULL, (char *)NULL } +}; + +/* Forward declarations. */ +char *stripwhite (); +COMMAND *find_command (); + +/* The name of this program, as taken from argv[0]. */ +char *progname; + +/* When non-zero, this global means the user is done using this program. */ +int done; + +char * +dupstr (s) + char *s; +{ + char *r; + + r = xmalloc (strlen (s) + 1); + strcpy (r, s); + return (r); +} + +main (argc, argv) + int argc; + char **argv; +{ + char *line, *s; + + progname = argv[0]; + + initialize_readline (); /* Bind our completer. */ + + /* Loop reading and executing lines until the user quits. */ + for ( ; done == 0; ) + { + line = readline ("FileMan: "); + + if (!line) + break; + + /* Remove leading and trailing whitespace from the line. + Then, if there is anything left, add it to the history list + and execute it. */ + s = stripwhite (line); + + if (*s) + { + add_history (s); + execute_line (s); + } + + free (line); + } + exit (0); +} + +/* Execute a command line. */ +int +execute_line (line) + char *line; +{ + register int i; + COMMAND *command; + char *word; + + /* Isolate the command word. */ + i = 0; + while (line[i] && whitespace (line[i])) + i++; + word = line + i; + + while (line[i] && !whitespace (line[i])) + i++; + + if (line[i]) + line[i++] = '\0'; + + command = find_command (word); + + if (!command) + { + fprintf (stderr, "%s: No such command for FileMan.\n", word); + return (-1); + } + + /* Get argument to command, if any. */ + while (whitespace (line[i])) + i++; + + word = line + i; + + /* Call the function. */ + return ((*(command->func)) (word)); +} + +/* Look up NAME as the name of a command, and return a pointer to that + command. Return a NULL pointer if NAME isn't a command name. */ +COMMAND * +find_command (name) + char *name; +{ + register int i; + + for (i = 0; commands[i].name; i++) + if (strcmp (name, commands[i].name) == 0) + return (&commands[i]); + + return ((COMMAND *)NULL); +} + +/* Strip whitespace from the start and end of STRING. Return a pointer + into STRING. */ +char * +stripwhite (string) + char *string; +{ + register char *s, *t; + + for (s = string; whitespace (*s); s++) + ; + + if (*s == 0) + return (s); + + t = s + strlen (s) - 1; + while (t > s && whitespace (*t)) + t--; + *++t = '\0'; + + return s; +} + +/* **************************************************************** */ +/* */ +/* Interface to Readline Completion */ +/* */ +/* **************************************************************** */ + +char *command_generator (); +char **fileman_completion (); + +/* Tell the GNU Readline library how to complete. We want to try to complete + on command names if this is the first word in the line, or on filenames + if not. */ +initialize_readline () +{ + /* Allow conditional parsing of the ~/.inputrc file. */ + rl_readline_name = "FileMan"; + + /* Tell the completer that we want a crack first. */ + rl_attempted_completion_function = (CPPFunction *)fileman_completion; +} + +/* Attempt to complete on the contents of TEXT. START and END bound the + region of rl_line_buffer that contains the word to complete. TEXT is + the word to complete. We can use the entire contents of rl_line_buffer + in case we want to do some simple parsing. Return the array of matches, + or NULL if there aren't any. */ +char ** +fileman_completion (text, start, end) + char *text; + int start, end; +{ + char **matches; + + matches = (char **)NULL; + + /* If this word is at the start of the line, then it is a command + to complete. Otherwise it is the name of a file in the current + directory. */ + if (start == 0) + matches = completion_matches (text, command_generator); + + return (matches); +} + +/* Generator function for command completion. STATE lets us know whether + to start from scratch; without any state (i.e. STATE == 0), then we + start at the top of the list. */ +char * +command_generator (text, state) + char *text; + int state; +{ + static int list_index, len; + char *name; + + /* If this is a new word to complete, initialize now. This includes + saving the length of TEXT for efficiency, and initializing the index + variable to 0. */ + if (!state) + { + list_index = 0; + len = strlen (text); + } + + /* Return the next name which partially matches from the command list. */ + while (name = commands[list_index].name) + { + list_index++; + + if (strncmp (name, text, len) == 0) + return (dupstr(name)); + } + + /* If no names matched, then return NULL. */ + return ((char *)NULL); +} + +/* **************************************************************** */ +/* */ +/* FileMan Commands */ +/* */ +/* **************************************************************** */ + +/* String to pass to system (). This is for the LIST, VIEW and RENAME + commands. */ +static char syscom[1024]; + +/* List the file(s) named in arg. */ +com_list (arg) + char *arg; +{ + if (!arg) + arg = ""; + + sprintf (syscom, "ls -FClg %s", arg); + return (system (syscom)); +} + +com_view (arg) + char *arg; +{ + if (!valid_argument ("view", arg)) + return 1; + + sprintf (syscom, "more %s", arg); + return (system (syscom)); +} + +com_rename (arg) + char *arg; +{ + too_dangerous ("rename"); + return (1); +} + +com_stat (arg) + char *arg; +{ + struct stat finfo; + + if (!valid_argument ("stat", arg)) + return (1); + + if (stat (arg, &finfo) == -1) + { + perror (arg); + return (1); + } + + printf ("Statistics for `%s':\n", arg); + + printf ("%s has %d link%s, and is %d byte%s in length.\n", + arg, + finfo.st_nlink, + (finfo.st_nlink == 1) ? "" : "s", + finfo.st_size, + (finfo.st_size == 1) ? "" : "s"); + printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); + printf (" Last access at: %s", ctime (&finfo.st_atime)); + printf (" Last modified at: %s", ctime (&finfo.st_mtime)); + return (0); +} + +com_delete (arg) + char *arg; +{ + too_dangerous ("delete"); + return (1); +} + +/* Print out help for ARG, or for all of the commands if ARG is + not present. */ +com_help (arg) + char *arg; +{ + register int i; + int printed = 0; + + for (i = 0; commands[i].name; i++) + { + if (!*arg || (strcmp (arg, commands[i].name) == 0)) + { + printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); + printed++; + } + } + + if (!printed) + { + printf ("No commands match `%s'. Possibilties are:\n", arg); + + for (i = 0; commands[i].name; i++) + { + /* Print in six columns. */ + if (printed == 6) + { + printed = 0; + printf ("\n"); + } + + printf ("%s\t", commands[i].name); + printed++; + } + + if (printed) + printf ("\n"); + } + return (0); +} + +/* Change to the directory ARG. */ +com_cd (arg) + char *arg; +{ + if (chdir (arg) == -1) + { + perror (arg); + return 1; + } + + com_pwd (""); + return (0); +} + +/* Print out the current working directory. */ +com_pwd (ignore) + char *ignore; +{ + char dir[1024], *s; + + s = getwd (dir); + if (s == 0) + { + printf ("Error getting pwd: %s\n", dir); + return 1; + } + + printf ("Current directory is %s\n", dir); + return 0; +} + +/* The user wishes to quit using this program. Just set DONE non-zero. */ +com_quit (arg) + char *arg; +{ + done = 1; + return (0); +} + +/* Function which tells you that you can't do this. */ +too_dangerous (caller) + char *caller; +{ + fprintf (stderr, + "%s: Too dangerous for me to distribute. Write it yourself.\n", + caller); +} + +/* Return non-zero if ARG is a valid argument for CALLER, else print + an error message and return zero. */ +int +valid_argument (caller, arg) + char *caller, *arg; +{ + if (!arg || !*arg) + { + fprintf (stderr, "%s: Argument required.\n", caller); + return (0); + } + + return (1); +} diff --git a/readline/examples/histexamp.c b/readline/examples/histexamp.c new file mode 100644 index 00000000000..eceb66df19e --- /dev/null +++ b/readline/examples/histexamp.c @@ -0,0 +1,82 @@ +main () +{ + char line[1024], *t; + int len, done = 0; + + line[0] = 0; + + using_history (); + while (!done) + { + printf ("history$ "); + fflush (stdout); + t = fgets (line, sizeof (line) - 1, stdin); + if (t && *t) + { + len = strlen (t); + if (t[len - 1] == '\n') + t[len - 1] = '\0'; + } + + if (!t) + strcpy (line, "quit"); + + if (line[0]) + { + char *expansion; + int result; + + using_history (); + + result = history_expand (line, &expansion); + if (result) + fprintf (stderr, "%s\n", expansion); + + if (result < 0 || result == 2) + { + free (expansion); + continue; + } + + add_history (expansion); + strncpy (line, expansion, sizeof (line) - 1); + free (expansion); + } + + if (strcmp (line, "quit") == 0) + done = 1; + else if (strcmp (line, "save") == 0) + write_history ("history_file"); + else if (strcmp (line, "read") == 0) + read_history ("history_file"); + else if (strcmp (line, "list") == 0) + { + register HIST_ENTRY **the_list; + register int i; + + the_list = history_list (); + if (the_list) + for (i = 0; the_list[i]; i++) + printf ("%d: %s\n", i + history_base, the_list[i]->line); + } + else if (strncmp (line, "delete", 6) == 0) + { + int which; + if ((sscanf (line + 6, "%d", &which)) == 1) + { + HIST_ENTRY *entry = remove_history (which); + if (!entry) + fprintf (stderr, "No such entry %d\n", which); + else + { + free (entry->line); + free (entry); + } + } + else + { + fprintf (stderr, "non-numeric arg given to `delete'\n"); + } + } + } +} diff --git a/readline/examples/manexamp.c b/readline/examples/manexamp.c new file mode 100644 index 00000000000..3496efa00e7 --- /dev/null +++ b/readline/examples/manexamp.c @@ -0,0 +1,94 @@ +/* manexamp.c -- The examples which appear in the documentation are here. */ + +#include <stdio.h> +#include <readline/readline.h> + + +/* **************************************************************** */ +/* */ +* How to Emulate gets () */ +/* */ +/* **************************************************************** */ + +/* A static variable for holding the line. */ +static char *line_read = (char *)NULL; + +/* Read a string, and return a pointer to it. Returns NULL on EOF. */ +char * +rl_gets () +{ + /* If the buffer has already been allocated, return the memory + to the free pool. */ + if (line_read) + { + free (line_read); + line_read = (char *)NULL; + } + + /* Get a line from the user. */ + line_read = readline (""); + + /* If the line has any text in it, save it on the history. */ + if (line_read && *line_read) + add_history (line_read); + + return (line_read); +} + +/* **************************************************************** */ +/* */ +/* Writing a Function to be Called by Readline. */ +/* */ +/* **************************************************************** */ + +/* Invert the case of the COUNT following characters. */ +invert_case_line (count, key) + int count, key; +{ + register int start, end; + + start = rl_point; + + if (count < 0) + { + direction = -1; + count = -count; + } + else + direction = 1; + + /* Find the end of the range to modify. */ + end = start + (count * direction); + + /* Force it to be within range. */ + if (end > rl_end) + end = rl_end; + else if (end < 0) + end = -1; + + if (start > end) + { + int temp = start; + start = end; + end = temp; + } + + if (start == end) + return; + + /* Tell readline that we are modifying the line, so save the undo + information. */ + rl_modifying (start, end); + + for (; start != end; start += direction) + { + if (uppercase_p (rl_line_buffer[start])) + rl_line_buffer[start] = to_lower (rl_line_buffer[start]); + else if (lowercase_p (rl_line_buffer[start])) + rl_line_buffer[start] = to_upper (rl_line_buffer[start]); + } + + /* Move point to on top of the last character changed. */ + rl_point = end - direction; +} + diff --git a/readline/examples/rl.c b/readline/examples/rl.c new file mode 100644 index 00000000000..ccddd0fb752 --- /dev/null +++ b/readline/examples/rl.c @@ -0,0 +1,117 @@ +/* + * rl - command-line interface to read a line from the standard input + * (or another fd) using readline. + * + * usage: rl [-p prompt] [-u unit] [-d default] + */ + +/* + * Remove the next line if you're compiling this against an installed + * libreadline.a + */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> +#include <sys/types.h> +#include "posixstat.h" +#include "readline.h" +#include "history.h" + +extern int optind; +extern char *optarg; + +#if !defined (strchr) && !defined (__STDC__) +extern char *strrchr(); +#endif + +static char *progname; +static char *deftext; + +static int +set_deftext () +{ + if (deftext) + { + rl_insert_text (deftext); + deftext = (char *)NULL; + rl_startup_hook = (Function *)NULL; + } +} + +usage() +{ + fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default]\n", + progname, progname); +} + +main (argc, argv) + int argc; + char **argv; +{ + char *temp, *prompt; + struct stat sb; + int done, opt, fd; + FILE *ifp; + + progname = strrchr(argv[0], '/'); + if (progname == 0) + progname = argv[0]; + else + progname++; + + /* defaults */ + prompt = "readline$ "; + fd = 0; + deftext = (char *)0; + + while ((opt = getopt(argc, argv, "p:u:d:")) != EOF) + { + switch (opt) + { + case 'p': + prompt = optarg; + break; + case 'u': + fd = atoi(optarg); + if (fd < 0) + { + fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg); + exit (2); + } + break; + case 'd': + deftext = optarg; + break; + default: + usage (); + exit (2); + } + } + + if (fd != 0) + { + if (fstat (fd, &sb) < 0) + { + fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd); + exit (1); + } + ifp = fdopen (fd, "r"); + rl_instream = ifp; + } + + if (deftext && *deftext) + rl_startup_hook = set_deftext; + + temp = readline (prompt); + + /* Test for EOF. */ + if (temp == 0) + exit (1); + + puts (temp); + exit (0); +} diff --git a/readline/examples/rltest.c b/readline/examples/rltest.c new file mode 100644 index 00000000000..453f8ec2ada --- /dev/null +++ b/readline/examples/rltest.c @@ -0,0 +1,67 @@ +/* **************************************************************** */ +/* */ +/* Testing Readline */ +/* */ +/* **************************************************************** */ + +/* + * Remove the next line if you're compiling this against an installed + * libreadline.a + */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +#include <config.h> +#endif + +#include <stdio.h> +#include <sys/types.h> +#include "readline.h" +#include "history.h" + +extern HIST_ENTRY **history_list (); + +main () +{ + char *temp, *prompt; + int done; + + temp = (char *)NULL; + prompt = "readline$ "; + done = 0; + + while (!done) + { + temp = readline (prompt); + + /* Test for EOF. */ + if (!temp) + exit (1); + + /* If there is anything on the line, print it and remember it. */ + if (*temp) + { + fprintf (stderr, "%s\r\n", temp); + add_history (temp); + } + + /* Check for `command' that we handle. */ + if (strcmp (temp, "quit") == 0) + done = 1; + + if (strcmp (temp, "list") == 0) + { + HIST_ENTRY **list; + register int i; + + list = history_list (); + if (list) + { + for (i = 0; list[i]; i++) + fprintf (stderr, "%d: %s\r\n", i, list[i]->line); + } + } + free (temp); + } + exit (0); +} diff --git a/readline/funmap.c b/readline/funmap.c new file mode 100644 index 00000000000..3946e0fc26e --- /dev/null +++ b/readline/funmap.c @@ -0,0 +1,252 @@ +/* funmap.c -- attach names to functions. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +extern char *xmalloc (), *xrealloc (); + +#if !defined (BUFSIZ) +#include <stdio.h> +#endif /* BUFSIZ */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "rlconf.h" +#include "readline.h" + +extern int _rl_qsort_string_compare (); + +FUNMAP **funmap; +static int funmap_size; +static int funmap_entry; + +/* After initializing the function map, this is the index of the first + program specific function. */ +int funmap_program_specific_entry_start; + +static FUNMAP default_funmap[] = { + { "abort", rl_abort }, + { "accept-line", rl_newline }, + { "arrow-key-prefix", rl_arrow_keys }, + { "backward-char", rl_backward }, + { "backward-delete-char", rl_rubout }, + { "backward-kill-line", rl_backward_kill_line }, + { "backward-kill-word", rl_backward_kill_word }, + { "backward-word", rl_backward_word }, + { "beginning-of-history", rl_beginning_of_history }, + { "beginning-of-line", rl_beg_of_line }, + { "call-last-kbd-macro", rl_call_last_kbd_macro }, + { "capitalize-word", rl_capitalize_word }, + { "character-search", rl_char_search }, + { "character-search-backward", rl_backward_char_search }, + { "clear-screen", rl_clear_screen }, + { "complete", rl_complete }, + { "copy-backward-word", rl_copy_backward_word }, + { "copy-forward-word", rl_copy_forward_word }, + { "copy-region-as-kill", rl_copy_region_to_kill }, + { "delete-char", rl_delete }, + { "delete-horizontal-space", rl_delete_horizontal_space }, + { "digit-argument", rl_digit_argument }, + { "do-lowercase-version", rl_do_lowercase_version }, + { "downcase-word", rl_downcase_word }, + { "dump-functions", rl_dump_functions }, + { "dump-macros", rl_dump_macros }, + { "dump-variables", rl_dump_variables }, + { "emacs-editing-mode", rl_emacs_editing_mode }, + { "end-kbd-macro", rl_end_kbd_macro }, + { "end-of-history", rl_end_of_history }, + { "end-of-line", rl_end_of_line }, + { "exchange-point-and-mark", rl_exchange_point_and_mark }, + { "forward-char", rl_forward }, + { "forward-search-history", rl_forward_search_history }, + { "forward-word", rl_forward_word }, + { "history-search-backward", rl_history_search_backward }, + { "history-search-forward", rl_history_search_forward }, + { "insert-comment", rl_insert_comment }, + { "insert-completions", rl_insert_completions }, + { "kill-whole-line", rl_kill_full_line }, + { "kill-line", rl_kill_line }, + { "kill-region", rl_kill_region }, + { "kill-word", rl_kill_word }, + { "menu-complete", rl_menu_complete }, + { "next-history", rl_get_next_history }, + { "non-incremental-forward-search-history", rl_noninc_forward_search }, + { "non-incremental-reverse-search-history", rl_noninc_reverse_search }, + { "non-incremental-forward-search-history-again", rl_noninc_forward_search_again }, + { "non-incremental-reverse-search-history-again", rl_noninc_reverse_search_again }, +#ifdef __CYGWIN32__ + { "paste-from-clipboard", rl_paste_from_clipboard }, +#endif + { "possible-completions", rl_possible_completions }, + { "previous-history", rl_get_previous_history }, + { "quoted-insert", rl_quoted_insert }, + { "re-read-init-file", rl_re_read_init_file }, + { "redraw-current-line", rl_refresh_line}, + { "reverse-search-history", rl_reverse_search_history }, + { "revert-line", rl_revert_line }, + { "self-insert", rl_insert }, + { "set-mark", rl_set_mark }, + { "start-kbd-macro", rl_start_kbd_macro }, + { "tab-insert", rl_tab_insert }, + { "tilde-expand", rl_tilde_expand }, + { "transpose-chars", rl_transpose_chars }, + { "transpose-words", rl_transpose_words }, + { "tty-status", rl_tty_status }, + { "undo", rl_undo_command }, + { "universal-argument", rl_universal_argument }, + { "unix-line-discard", rl_unix_line_discard }, + { "unix-word-rubout", rl_unix_word_rubout }, + { "upcase-word", rl_upcase_word }, + { "yank", rl_yank }, + { "yank-last-arg", rl_yank_last_arg }, + { "yank-nth-arg", rl_yank_nth_arg }, + { "yank-pop", rl_yank_pop }, + +#if defined (VI_MODE) + { "vi-append-eol", rl_vi_append_eol }, + { "vi-append-mode", rl_vi_append_mode }, + { "vi-arg-digit", rl_vi_arg_digit }, + { "vi-back-to-indent", rl_vi_back_to_indent }, + { "vi-bWord", rl_vi_bWord }, + { "vi-bracktype", rl_vi_bracktype }, + { "vi-bword", rl_vi_bword }, + { "vi-change-case", rl_vi_change_case }, + { "vi-change-char", rl_vi_change_char }, + { "vi-change-to", rl_vi_change_to }, + { "vi-char-search", rl_vi_char_search }, + { "vi-column", rl_vi_column }, + { "vi-complete", rl_vi_complete }, + { "vi-delete", rl_vi_delete }, + { "vi-delete-to", rl_vi_delete_to }, + { "vi-eWord", rl_vi_eWord }, + { "vi-editing-mode", rl_vi_editing_mode }, + { "vi-end-word", rl_vi_end_word }, + { "vi-eof-maybe", rl_vi_eof_maybe }, + { "vi-eword", rl_vi_eword }, + { "vi-fWord", rl_vi_fWord }, + { "vi-fetch-history", rl_vi_fetch_history }, + { "vi-first-print", rl_vi_first_print }, + { "vi-fword", rl_vi_fword }, + { "vi-goto-mark", rl_vi_goto_mark }, + { "vi-insert-beg", rl_vi_insert_beg }, + { "vi-insertion-mode", rl_vi_insertion_mode }, + { "vi-match", rl_vi_match }, + { "vi-movement-mode", rl_vi_movement_mode }, + { "vi-next-word", rl_vi_next_word }, + { "vi-overstrike", rl_vi_overstrike }, + { "vi-overstrike-delete", rl_vi_overstrike_delete }, + { "vi-prev-word", rl_vi_prev_word }, + { "vi-put", rl_vi_put }, + { "vi-redo", rl_vi_redo }, + { "vi-replace", rl_vi_replace }, + { "vi-search", rl_vi_search }, + { "vi-search-again", rl_vi_search_again }, + { "vi-set-mark", rl_vi_set_mark }, + { "vi-subst", rl_vi_subst }, + { "vi-tilde-expand", rl_vi_tilde_expand }, + { "vi-yank-arg", rl_vi_yank_arg }, + { "vi-yank-to", rl_vi_yank_to }, +#endif /* VI_MODE */ + + {(char *)NULL, (Function *)NULL } +}; + +int +rl_add_funmap_entry (name, function) + char *name; + Function *function; +{ + if (funmap_entry + 2 >= funmap_size) + { + funmap_size += 64; + funmap = (FUNMAP **)xrealloc (funmap, funmap_size * sizeof (FUNMAP *)); + } + + funmap[funmap_entry] = (FUNMAP *)xmalloc (sizeof (FUNMAP)); + funmap[funmap_entry]->name = name; + funmap[funmap_entry]->function = function; + + funmap[++funmap_entry] = (FUNMAP *)NULL; + return funmap_entry; +} + +static int funmap_initialized; + +/* Make the funmap contain all of the default entries. */ +void +rl_initialize_funmap () +{ + register int i; + + if (funmap_initialized) + return; + + for (i = 0; default_funmap[i].name; i++) + rl_add_funmap_entry (default_funmap[i].name, default_funmap[i].function); + + funmap_initialized = 1; + funmap_program_specific_entry_start = i; +} + +/* Produce a NULL terminated array of known function names. The array + is sorted. The array itself is allocated, but not the strings inside. + You should free () the array when you done, but not the pointrs. */ +char ** +rl_funmap_names () +{ + char **result; + int result_size, result_index; + + /* Make sure that the function map has been initialized. */ + rl_initialize_funmap (); + + for (result_index = result_size = 0, result = (char **)NULL; funmap[result_index]; result_index++) + { + if (result_index + 2 > result_size) + { + result_size += 20; + result = (char **)xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index] = funmap[result_index]->name; + result[result_index + 1] = (char *)NULL; + } + + qsort (result, result_index, sizeof (char *), _rl_qsort_string_compare); + return (result); +} + +/* Things that mean `Control'. */ +char *possible_control_prefixes[] = { + "Control-", "C-", "CTRL-", (char *)NULL +}; + +char *possible_meta_prefixes[] = { + "Meta", "M-", (char *)NULL +}; diff --git a/readline/histexpand.c b/readline/histexpand.c new file mode 100644 index 00000000000..0dc179ac7f6 --- /dev/null +++ b/readline/histexpand.c @@ -0,0 +1,1355 @@ +/* histexpand.c -- history expansion. */ + +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# ifndef _MINIX +# include <sys/types.h> +# endif +# include <unistd.h> +#endif + +#if defined (HAVE_STRING_H) +# include <string.h> +#else +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#include "history.h" +#include "histlib.h" + +#define HISTORY_WORD_DELIMITERS " \t\n;&()|<>" +#define HISTORY_QUOTE_CHARACTERS "\"'`" + +static char error_pointer; + +static char *subst_lhs; +static char *subst_rhs; +static int subst_lhs_len; +static int subst_rhs_len; + +static char *get_history_word_specifier (); +static char *history_find_word (); + +extern int history_offset; + +extern char *single_quote (); +static char *quote_breaks (); + +extern char *xmalloc (), *xrealloc (); + +/* Variables exported by this file. */ +/* The character that represents the start of a history expansion + request. This is usually `!'. */ +char history_expansion_char = '!'; + +/* The character that invokes word substitution if found at the start of + a line. This is usually `^'. */ +char history_subst_char = '^'; + +/* During tokenization, if this character is seen as the first character + of a word, then it, and all subsequent characters upto a newline are + ignored. For a Bourne shell, this should be '#'. Bash special cases + the interactive comment character to not be a comment delimiter. */ +char history_comment_char = '\0'; + +/* The list of characters which inhibit the expansion of text if found + immediately following history_expansion_char. */ +char *history_no_expand_chars = " \t\n\r="; + +/* If set to a non-zero value, single quotes inhibit history expansion. + The default is 0. */ +int history_quotes_inhibit_expansion = 0; + +/* If set, this points to a function that is called to verify that a + particular history expansion should be performed. */ +Function *history_inhibit_expansion_function; + +/* **************************************************************** */ +/* */ +/* History Expansion */ +/* */ +/* **************************************************************** */ + +/* Hairy history expansion on text, not tokens. This is of general + use, and thus belongs in this library. */ + +/* The last string searched for by a !?string? search. */ +static char *search_string; + +/* The last string matched by a !?string? search. */ +static char *search_match; + +/* Return the event specified at TEXT + OFFSET modifying OFFSET to + point to after the event specifier. Just a pointer to the history + line is returned; NULL is returned in the event of a bad specifier. + You pass STRING with *INDEX equal to the history_expansion_char that + begins this specification. + DELIMITING_QUOTE is a character that is allowed to end the string + specification for what to search for in addition to the normal + characters `:', ` ', `\t', `\n', and sometimes `?'. + So you might call this function like: + line = get_history_event ("!echo:p", &index, 0); */ +char * +get_history_event (string, caller_index, delimiting_quote) + char *string; + int *caller_index; + int delimiting_quote; +{ + register int i; + register char c; + HIST_ENTRY *entry; + int which, sign, local_index, substring_okay; + Function *search_func; + char *temp; + + /* The event can be specified in a number of ways. + + !! the previous command + !n command line N + !-n current command-line minus N + !str the most recent command starting with STR + !?str[?] + the most recent command containing STR + + All values N are determined via HISTORY_BASE. */ + + i = *caller_index; + + if (string[i] != history_expansion_char) + return ((char *)NULL); + + /* Move on to the specification. */ + i++; + + sign = 1; + substring_okay = 0; + +#define RETURN_ENTRY(e, w) \ + return ((e = history_get (w)) ? e->line : (char *)NULL) + + /* Handle !! case. */ + if (string[i] == history_expansion_char) + { + i++; + which = history_base + (history_length - 1); + *caller_index = i; + RETURN_ENTRY (entry, which); + } + + /* Hack case of numeric line specification. */ + if (string[i] == '-') + { + sign = -1; + i++; + } + + if (_rl_digit_p (string[i])) + { + /* Get the extent of the digits and compute the value. */ + for (which = 0; _rl_digit_p (string[i]); i++) + which = (which * 10) + _rl_digit_value (string[i]); + + *caller_index = i; + + if (sign < 0) + which = (history_length + history_base) - which; + + RETURN_ENTRY (entry, which); + } + + /* This must be something to search for. If the spec begins with + a '?', then the string may be anywhere on the line. Otherwise, + the string must be found at the start of a line. */ + if (string[i] == '?') + { + substring_okay++; + i++; + } + + /* Only a closing `?' or a newline delimit a substring search string. */ + for (local_index = i; c = string[i]; i++) + if ((!substring_okay && (whitespace (c) || c == ':' || + (history_search_delimiter_chars && member (c, history_search_delimiter_chars)) || + string[i] == delimiting_quote)) || + string[i] == '\n' || + (substring_okay && string[i] == '?')) + break; + + which = i - local_index; + temp = xmalloc (1 + which); + if (which) + strncpy (temp, string + local_index, which); + temp[which] = '\0'; + + if (substring_okay && string[i] == '?') + i++; + + *caller_index = i; + +#define FAIL_SEARCH() \ + do { \ + history_offset = history_length; free (temp) ; return (char *)NULL; \ + } while (0) + + /* If there is no search string, try to use the previous search string, + if one exists. If not, fail immediately. */ + if (*temp == '\0' && substring_okay) + { + if (search_string) + { + free (temp); + temp = savestring (search_string); + } + else + FAIL_SEARCH (); + } + + search_func = substring_okay ? history_search : history_search_prefix; + while (1) + { + local_index = (*search_func) (temp, -1); + + if (local_index < 0) + FAIL_SEARCH (); + + if (local_index == 0 || substring_okay) + { + entry = current_history (); + history_offset = history_length; + + /* If this was a substring search, then remember the + string that we matched for word substitution. */ + if (substring_okay) + { + FREE (search_string); + search_string = temp; + + FREE (search_match); + search_match = history_find_word (entry->line, local_index); + } + else + free (temp); + + return (entry->line); + } + + if (history_offset) + history_offset--; + else + FAIL_SEARCH (); + } +#undef FAIL_SEARCH +#undef RETURN_ENTRY +} + +/* Function for extracting single-quoted strings. Used for inhibiting + history expansion within single quotes. */ + +/* Extract the contents of STRING as if it is enclosed in single quotes. + SINDEX, when passed in, is the offset of the character immediately + following the opening single quote; on exit, SINDEX is left pointing + to the closing single quote. */ +static void +hist_string_extract_single_quoted (string, sindex) + char *string; + int *sindex; +{ + register int i; + + for (i = *sindex; string[i] && string[i] != '\''; i++) + ; + + *sindex = i; +} + +static char * +quote_breaks (s) + char *s; +{ + register char *p, *r; + char *ret; + int len = 3; + + for (p = s; p && *p; p++, len++) + { + if (*p == '\'') + len += 3; + else if (whitespace (*p) || *p == '\n') + len += 2; + } + + r = ret = xmalloc (len); + *r++ = '\''; + for (p = s; p && *p; ) + { + if (*p == '\'') + { + *r++ = '\''; + *r++ = '\\'; + *r++ = '\''; + *r++ = '\''; + p++; + } + else if (whitespace (*p) || *p == '\n') + { + *r++ = '\''; + *r++ = *p++; + *r++ = '\''; + } + else + *r++ = *p++; + } + *r++ = '\''; + *r = '\0'; + return ret; +} + +static char * +hist_error(s, start, current, errtype) + char *s; + int start, current, errtype; +{ + char *temp, *emsg; + int ll, elen; + + ll = current - start; + + switch (errtype) + { + case EVENT_NOT_FOUND: + emsg = "event not found"; + elen = 15; + break; + case BAD_WORD_SPEC: + emsg = "bad word specifier"; + elen = 18; + break; + case SUBST_FAILED: + emsg = "substitution failed"; + elen = 19; + break; + case BAD_MODIFIER: + emsg = "unrecognized history modifier"; + elen = 29; + break; + default: + emsg = "unknown expansion error"; + elen = 23; + break; + } + + temp = xmalloc (ll + elen + 3); + strncpy (temp, s + start, ll); + temp[ll] = ':'; + temp[ll + 1] = ' '; + strcpy (temp + ll + 2, emsg); + return (temp); +} + +/* Get a history substitution string from STR starting at *IPTR + and return it. The length is returned in LENPTR. + + A backslash can quote the delimiter. If the string is the + empty string, the previous pattern is used. If there is + no previous pattern for the lhs, the last history search + string is used. + + If IS_RHS is 1, we ignore empty strings and set the pattern + to "" anyway. subst_lhs is not changed if the lhs is empty; + subst_rhs is allowed to be set to the empty string. */ + +static char * +get_subst_pattern (str, iptr, delimiter, is_rhs, lenptr) + char *str; + int *iptr, delimiter, is_rhs, *lenptr; +{ + register int si, i, j, k; + char *s = (char *) NULL; + + i = *iptr; + + for (si = i; str[si] && str[si] != delimiter; si++) + if (str[si] == '\\' && str[si + 1] == delimiter) + si++; + + if (si > i || is_rhs) + { + s = xmalloc (si - i + 1); + for (j = 0, k = i; k < si; j++, k++) + { + /* Remove a backslash quoting the search string delimiter. */ + if (str[k] == '\\' && str[k + 1] == delimiter) + k++; + s[j] = str[k]; + } + s[j] = '\0'; + if (lenptr) + *lenptr = j; + } + + i = si; + if (str[i]) + i++; + *iptr = i; + + return s; +} + +static void +postproc_subst_rhs () +{ + char *new; + int i, j, new_size; + + new = xmalloc (new_size = subst_rhs_len + subst_lhs_len); + for (i = j = 0; i < subst_rhs_len; i++) + { + if (subst_rhs[i] == '&') + { + if (j + subst_lhs_len >= new_size) + new = xrealloc (new, (new_size = new_size * 2 + subst_lhs_len)); + strcpy (new + j, subst_lhs); + j += subst_lhs_len; + } + else + { + /* a single backslash protects the `&' from lhs interpolation */ + if (subst_rhs[i] == '\\' && subst_rhs[i + 1] == '&') + i++; + if (j >= new_size) + new = xrealloc (new, new_size *= 2); + new[j++] = subst_rhs[i]; + } + } + new[j] = '\0'; + free (subst_rhs); + subst_rhs = new; + subst_rhs_len = j; +} + +/* Expand the bulk of a history specifier starting at STRING[START]. + Returns 0 if everything is OK, -1 if an error occurred, and 1 + if the `p' modifier was supplied and the caller should just print + the returned string. Returns the new index into string in + *END_INDEX_PTR, and the expanded specifier in *RET_STRING. */ +static int +history_expand_internal (string, start, end_index_ptr, ret_string, current_line) + char *string; + int start, *end_index_ptr; + char **ret_string; + char *current_line; /* for !# */ +{ + int i, n, starting_index; + int substitute_globally, want_quotes, print_only; + char *event, *temp, *result, *tstr, *t, c, *word_spec; + int result_len; + + result = xmalloc (result_len = 128); + + i = start; + + /* If it is followed by something that starts a word specifier, + then !! is implied as the event specifier. */ + + if (member (string[i + 1], ":$*%^")) + { + char fake_s[3]; + int fake_i = 0; + i++; + fake_s[0] = fake_s[1] = history_expansion_char; + fake_s[2] = '\0'; + event = get_history_event (fake_s, &fake_i, 0); + } + else if (string[i + 1] == '#') + { + i += 2; + event = current_line; + } + else + { + int quoted_search_delimiter = 0; + + /* If the character before this `!' is a double or single + quote, then this expansion takes place inside of the + quoted string. If we have to search for some text ("!foo"), + allow the delimiter to end the search string. */ + if (i && (string[i - 1] == '\'' || string[i - 1] == '"')) + quoted_search_delimiter = string[i - 1]; + event = get_history_event (string, &i, quoted_search_delimiter); + } + + if (event == 0) + { + *ret_string = hist_error (string, start, i, EVENT_NOT_FOUND); + free (result); + return (-1); + } + + /* If a word specifier is found, then do what that requires. */ + starting_index = i; + word_spec = get_history_word_specifier (string, event, &i); + + /* There is no such thing as a `malformed word specifier'. However, + it is possible for a specifier that has no match. In that case, + we complain. */ + if (word_spec == (char *)&error_pointer) + { + *ret_string = hist_error (string, starting_index, i, BAD_WORD_SPEC); + free (result); + return (-1); + } + + /* If no word specifier, than the thing of interest was the event. */ + temp = word_spec ? savestring (word_spec) : savestring (event); + FREE (word_spec); + + /* Perhaps there are other modifiers involved. Do what they say. */ + want_quotes = substitute_globally = print_only = 0; + starting_index = i; + + while (string[i] == ':') + { + c = string[i + 1]; + + if (c == 'g') + { + substitute_globally = 1; + i++; + c = string[i + 1]; + } + + switch (c) + { + default: + *ret_string = hist_error (string, i+1, i+2, BAD_MODIFIER); + free (result); + free (temp); + return -1; + + case 'q': + want_quotes = 'q'; + break; + + case 'x': + want_quotes = 'x'; + break; + + /* :p means make this the last executed line. So we + return an error state after adding this line to the + history. */ + case 'p': + print_only++; + break; + + /* :t discards all but the last part of the pathname. */ + case 't': + tstr = strrchr (temp, '/'); + if (tstr) + { + tstr++; + t = savestring (tstr); + free (temp); + temp = t; + } + break; + + /* :h discards the last part of a pathname. */ + case 'h': + tstr = strrchr (temp, '/'); + if (tstr) + *tstr = '\0'; + break; + + /* :r discards the suffix. */ + case 'r': + tstr = strrchr (temp, '.'); + if (tstr) + *tstr = '\0'; + break; + + /* :e discards everything but the suffix. */ + case 'e': + tstr = strrchr (temp, '.'); + if (tstr) + { + t = savestring (tstr); + free (temp); + temp = t; + } + break; + + /* :s/this/that substitutes `that' for the first + occurrence of `this'. :gs/this/that substitutes `that' + for each occurrence of `this'. :& repeats the last + substitution. :g& repeats the last substitution + globally. */ + + case '&': + case 's': + { + char *new_event, *t; + int delimiter, failed, si, l_temp; + + if (c == 's') + { + if (i + 2 < (int)strlen (string)) + delimiter = string[i + 2]; + else + break; /* no search delimiter */ + + i += 3; + + t = get_subst_pattern (string, &i, delimiter, 0, &subst_lhs_len); + /* An empty substitution lhs with no previous substitution + uses the last search string as the lhs. */ + if (t) + { + FREE (subst_lhs); + subst_lhs = t; + } + else if (!subst_lhs) + { + if (search_string && *search_string) + { + subst_lhs = savestring (search_string); + subst_lhs_len = strlen (subst_lhs); + } + else + { + subst_lhs = (char *) NULL; + subst_lhs_len = 0; + } + } + + /* If there is no lhs, the substitution can't succeed. */ + if (subst_lhs_len == 0) + { + *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); + free (result); + free (temp); + return -1; + } + + FREE (subst_rhs); + subst_rhs = get_subst_pattern (string, &i, delimiter, 1, &subst_rhs_len); + + /* If `&' appears in the rhs, it's supposed to be replaced + with the lhs. */ + if (member ('&', subst_rhs)) + postproc_subst_rhs (); + } + else + i += 2; + + l_temp = strlen (temp); + /* Ignore impossible cases. */ + if (subst_lhs_len > l_temp) + { + *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); + free (result); + free (temp); + return (-1); + } + + /* Find the first occurrence of THIS in TEMP. */ + si = 0; + for (failed = 1; (si + subst_lhs_len) <= l_temp; si++) + if (STREQN (temp+si, subst_lhs, subst_lhs_len)) + { + int len = subst_rhs_len - subst_lhs_len + l_temp; + new_event = xmalloc (1 + len); + strncpy (new_event, temp, si); + strncpy (new_event + si, subst_rhs, subst_rhs_len); + strncpy (new_event + si + subst_rhs_len, + temp + si + subst_lhs_len, + l_temp - (si + subst_lhs_len)); + new_event[len] = '\0'; + free (temp); + temp = new_event; + + failed = 0; + + if (substitute_globally) + { + si += subst_rhs_len; + l_temp = strlen (temp); + substitute_globally++; + continue; + } + else + break; + } + + if (substitute_globally > 1) + { + substitute_globally = 0; + continue; /* don't want to increment i */ + } + + if (failed == 0) + continue; /* don't want to increment i */ + + *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); + free (result); + free (temp); + return (-1); + } + } + i += 2; + } + /* Done with modfiers. */ + /* Believe it or not, we have to back the pointer up by one. */ + --i; + + if (want_quotes) + { + char *x; + + if (want_quotes == 'q') + x = single_quote (temp); + else if (want_quotes == 'x') + x = quote_breaks (temp); + else + x = savestring (temp); + + free (temp); + temp = x; + } + + n = strlen (temp); + if (n >= result_len) + result = xrealloc (result, n + 2); + strcpy (result, temp); + free (temp); + + *end_index_ptr = i; + *ret_string = result; + return (print_only); +} + +/* Expand the string STRING, placing the result into OUTPUT, a pointer + to a string. Returns: + + -1) If there was an error in expansion. + 0) If no expansions took place (or, if the only change in + the text was the de-slashifying of the history expansion + character) + 1) If expansions did take place + 2) If the `p' modifier was given and the caller should print the result + + If an error ocurred in expansion, then OUTPUT contains a descriptive + error message. */ + +#define ADD_STRING(s) \ + do \ + { \ + int sl = strlen (s); \ + j += sl; \ + if (j >= result_len) \ + { \ + while (j >= result_len) \ + result_len += 128; \ + result = xrealloc (result, result_len); \ + } \ + strcpy (result + j - sl, s); \ + } \ + while (0) + +#define ADD_CHAR(c) \ + do \ + { \ + if (j >= result_len - 1) \ + result = xrealloc (result, result_len += 64); \ + result[j++] = c; \ + result[j] = '\0'; \ + } \ + while (0) + +int +history_expand (hstring, output) + char *hstring; + char **output; +{ + register int j; + int i, r, l, passc, cc, modified, eindex, only_printing; + char *string; + + /* The output string, and its length. */ + int result_len; + char *result; + + /* Used when adding the string. */ + char *temp; + + /* Setting the history expansion character to 0 inhibits all + history expansion. */ + if (history_expansion_char == 0) + { + *output = savestring (hstring); + return (0); + } + + /* Prepare the buffer for printing error messages. */ + result = xmalloc (result_len = 256); + result[0] = '\0'; + + only_printing = modified = 0; + l = strlen (hstring); + + /* Grovel the string. Only backslash and single quotes can quote the + history escape character. We also handle arg specifiers. */ + + /* Before we grovel forever, see if the history_expansion_char appears + anywhere within the text. */ + + /* The quick substitution character is a history expansion all right. That + is to say, "^this^that^" is equivalent to "!!:s^this^that^", and in fact, + that is the substitution that we do. */ + if (hstring[0] == history_subst_char) + { + string = xmalloc (l + 5); + + string[0] = string[1] = history_expansion_char; + string[2] = ':'; + string[3] = 's'; + strcpy (string + 4, hstring); + l += 4; + } + else + { + string = hstring; + /* If not quick substitution, still maybe have to do expansion. */ + + /* `!' followed by one of the characters in history_no_expand_chars + is NOT an expansion. */ + for (i = 0; string[i]; i++) + { + cc = string[i + 1]; + /* The history_comment_char, if set, appearing that the beginning + of a word signifies that the rest of the line should not have + history expansion performed on it. + Skip the rest of the line and break out of the loop. */ + if (history_comment_char && string[i] == history_comment_char && + (i == 0 || member (string[i - 1], HISTORY_WORD_DELIMITERS))) + { + while (string[i]) + i++; + break; + } + else if (string[i] == history_expansion_char) + { + if (!cc || member (cc, history_no_expand_chars)) + continue; + /* If the calling application has set + history_inhibit_expansion_function to a function that checks + for special cases that should not be history expanded, + call the function and skip the expansion if it returns a + non-zero value. */ + else if (history_inhibit_expansion_function && + (*history_inhibit_expansion_function) (string, i)) + continue; + else + break; + } + /* XXX - at some point, might want to extend this to handle + double quotes as well. */ + else if (history_quotes_inhibit_expansion && string[i] == '\'') + { + /* If this is bash, single quotes inhibit history expansion. */ + i++; + hist_string_extract_single_quoted (string, &i); + } + else if (history_quotes_inhibit_expansion && string[i] == '\\') + { + /* If this is bash, allow backslashes to quote single + quotes and the history expansion character. */ + if (cc == '\'' || cc == history_expansion_char) + i++; + } + } + + if (string[i] != history_expansion_char) + { + free (result); + *output = savestring (string); + return (0); + } + } + + /* Extract and perform the substitution. */ + for (passc = i = j = 0; i < l; i++) + { + int tchar = string[i]; + + if (passc) + { + passc = 0; + ADD_CHAR (tchar); + continue; + } + + if (tchar == history_expansion_char) + tchar = -3; + else if (tchar == history_comment_char) + tchar = -2; + + switch (tchar) + { + default: + ADD_CHAR (string[i]); + break; + + case '\\': + passc++; + ADD_CHAR (tchar); + break; + + case '\'': + { + /* If history_quotes_inhibit_expansion is set, single quotes + inhibit history expansion. */ + if (history_quotes_inhibit_expansion) + { + int quote, slen; + + quote = i++; + hist_string_extract_single_quoted (string, &i); + + slen = i - quote + 2; + temp = xmalloc (slen); + strncpy (temp, string + quote, slen); + temp[slen - 1] = '\0'; + ADD_STRING (temp); + free (temp); + } + else + ADD_CHAR (string[i]); + break; + } + + case -2: /* history_comment_char */ + if (i == 0 || member (string[i - 1], HISTORY_WORD_DELIMITERS)) + { + temp = xmalloc (l - i + 1); + strcpy (temp, string + i); + ADD_STRING (temp); + free (temp); + i = l; + } + else + ADD_CHAR (string[i]); + break; + + case -3: /* history_expansion_char */ + cc = string[i + 1]; + + /* If the history_expansion_char is followed by one of the + characters in history_no_expand_chars, then it is not a + candidate for expansion of any kind. */ + if (member (cc, history_no_expand_chars)) + { + ADD_CHAR (string[i]); + break; + } + +#if defined (NO_BANG_HASH_MODIFIERS) + /* There is something that is listed as a `word specifier' in csh + documentation which means `the expanded text to this point'. + That is not a word specifier, it is an event specifier. If we + don't want to allow modifiers with `!#', just stick the current + output line in again. */ + if (cc == '#') + { + if (result) + { + temp = xmalloc (1 + strlen (result)); + strcpy (temp, result); + ADD_STRING (temp); + free (temp); + } + i++; + break; + } +#endif + + r = history_expand_internal (string, i, &eindex, &temp, result); + if (r < 0) + { + *output = temp; + free (result); + if (string != hstring) + free (string); + return -1; + } + else + { + if (temp) + { + modified++; + if (*temp) + ADD_STRING (temp); + free (temp); + } + only_printing = r == 1; + i = eindex; + } + break; + } + } + + *output = result; + if (string != hstring) + free (string); + + if (only_printing) + { + add_history (result); + return (2); + } + + return (modified != 0); +} + +/* Return a consed string which is the word specified in SPEC, and found + in FROM. NULL is returned if there is no spec. The address of + ERROR_POINTER is returned if the word specified cannot be found. + CALLER_INDEX is the offset in SPEC to start looking; it is updated + to point to just after the last character parsed. */ +static char * +get_history_word_specifier (spec, from, caller_index) + char *spec, *from; + int *caller_index; +{ + register int i = *caller_index; + int first, last; + int expecting_word_spec = 0; + char *result; + + /* The range of words to return doesn't exist yet. */ + first = last = 0; + result = (char *)NULL; + + /* If we found a colon, then this *must* be a word specification. If + it isn't, then it is an error. */ + if (spec[i] == ':') + { + i++; + expecting_word_spec++; + } + + /* Handle special cases first. */ + + /* `%' is the word last searched for. */ + if (spec[i] == '%') + { + *caller_index = i + 1; + return (search_match ? savestring (search_match) : savestring ("")); + } + + /* `*' matches all of the arguments, but not the command. */ + if (spec[i] == '*') + { + *caller_index = i + 1; + result = history_arg_extract (1, '$', from); + return (result ? result : savestring ("")); + } + + /* `$' is last arg. */ + if (spec[i] == '$') + { + *caller_index = i + 1; + return (history_arg_extract ('$', '$', from)); + } + + /* Try to get FIRST and LAST figured out. */ + + if (spec[i] == '-') + first = 0; + else if (spec[i] == '^') + first = 1; + else if (_rl_digit_p (spec[i]) && expecting_word_spec) + { + for (first = 0; _rl_digit_p (spec[i]); i++) + first = (first * 10) + _rl_digit_value (spec[i]); + } + else + return ((char *)NULL); /* no valid `first' for word specifier */ + + if (spec[i] == '^' || spec[i] == '*') + { + last = (spec[i] == '^') ? 1 : '$'; /* x* abbreviates x-$ */ + i++; + } + else if (spec[i] != '-') + last = first; + else + { + i++; + + if (_rl_digit_p (spec[i])) + { + for (last = 0; _rl_digit_p (spec[i]); i++) + last = (last * 10) + _rl_digit_value (spec[i]); + } + else if (spec[i] == '$') + { + i++; + last = '$'; + } + else if (!spec[i] || spec[i] == ':') /* could be modifier separator */ + last = -1; /* x- abbreviates x-$ omitting word `$' */ + } + + *caller_index = i; + + if (last >= first || last == '$' || last < 0) + result = history_arg_extract (first, last, from); + + return (result ? result : (char *)&error_pointer); +} + +/* Extract the args specified, starting at FIRST, and ending at LAST. + The args are taken from STRING. If either FIRST or LAST is < 0, + then make that arg count from the right (subtract from the number of + tokens, so that FIRST = -1 means the next to last token on the line). + If LAST is `$' the last arg from STRING is used. */ +char * +history_arg_extract (first, last, string) + int first, last; + char *string; +{ + register int i, len; + char *result; + int size, offset; + char **list; + + /* XXX - think about making history_tokenize return a struct array, + each struct in array being a string and a length to avoid the + calls to strlen below. */ + if ((list = history_tokenize (string)) == NULL) + return ((char *)NULL); + + for (len = 0; list[len]; len++) + ; + + if (last < 0) + last = len + last - 1; + + if (first < 0) + first = len + first - 1; + + if (last == '$') + last = len - 1; + + if (first == '$') + first = len - 1; + + last++; + + if (first >= len || last > len || first < 0 || last < 0 || first > last) + result = ((char *)NULL); + else + { + for (size = 0, i = first; i < last; i++) + size += strlen (list[i]) + 1; + result = xmalloc (size + 1); + result[0] = '\0'; + + for (i = first, offset = 0; i < last; i++) + { + strcpy (result + offset, list[i]); + offset += strlen (list[i]); + if (i + 1 < last) + { + result[offset++] = ' '; + result[offset] = 0; + } + } + } + + for (i = 0; i < len; i++) + free (list[i]); + free (list); + + return (result); +} + +#define slashify_in_quotes "\\`\"$" + +/* Parse STRING into tokens and return an array of strings. If WIND is + not -1 and INDP is not null, we also want the word surrounding index + WIND. The position in the returned array of strings is returned in + *INDP. */ +static char ** +history_tokenize_internal (string, wind, indp) + char *string; + int wind, *indp; +{ + char **result; + register int i, start, result_index, size; + int len, delimiter; + + /* Get a token, and stuff it into RESULT. The tokens are split + exactly where the shell would split them. */ + for (i = result_index = size = 0, result = (char **)NULL; string[i]; ) + { + delimiter = 0; + + /* Skip leading whitespace. */ + for (; string[i] && whitespace (string[i]); i++) + ; + if (string[i] == 0 || string[i] == history_comment_char) + return (result); + + start = i; + + if (member (string[i], "()\n")) + { + i++; + goto got_token; + } + + if (member (string[i], "<>;&|$")) + { + int peek = string[i + 1]; + + if (peek == string[i] && peek != '$') + { + if (peek == '<' && string[i + 2] == '-') + i++; + i += 2; + goto got_token; + } + else + { + if ((peek == '&' && (string[i] == '>' || string[i] == '<')) || + ((peek == '>') && (string[i] == '&')) || + ((peek == '(') && (string[i] == '$'))) + { + i += 2; + goto got_token; + } + } + if (string[i] != '$') + { + i++; + goto got_token; + } + } + + /* Get word from string + i; */ + + if (member (string[i], HISTORY_QUOTE_CHARACTERS)) + delimiter = string[i++]; + + for (; string[i]; i++) + { + if (string[i] == '\\' && string[i + 1] == '\n') + { + i++; + continue; + } + + if (string[i] == '\\' && delimiter != '\'' && + (delimiter != '"' || member (string[i], slashify_in_quotes))) + { + i++; + continue; + } + + if (delimiter && string[i] == delimiter) + { + delimiter = 0; + continue; + } + + if (!delimiter && (member (string[i], HISTORY_WORD_DELIMITERS))) + break; + + if (!delimiter && member (string[i], HISTORY_QUOTE_CHARACTERS)) + delimiter = string[i]; + } + + got_token: + + /* If we are looking for the word in which the character at a + particular index falls, remember it. */ + if (indp && wind != -1 && wind >= start && wind < i) + *indp = result_index; + + len = i - start; + if (result_index + 2 >= size) + result = (char **)xrealloc (result, ((size += 10) * sizeof (char *))); + result[result_index] = xmalloc (1 + len); + strncpy (result[result_index], string + start, len); + result[result_index][len] = '\0'; + result[++result_index] = (char *)NULL; + } + + return (result); +} + +/* Return an array of tokens, much as the shell might. The tokens are + parsed out of STRING. */ +char ** +history_tokenize (string) + char *string; +{ + return (history_tokenize_internal (string, -1, (int *)NULL)); +} + +/* Find and return the word which contains the character at index IND + in the history line LINE. Used to save the word matched by the + last history !?string? search. */ +static char * +history_find_word (line, ind) + char *line; + int ind; +{ + char **words, *s; + int i, wind; + + words = history_tokenize_internal (line, ind, &wind); + if (wind == -1) + return ((char *)NULL); + s = words[wind]; + for (i = 0; i < wind; i++) + free (words[i]); + for (i = wind + 1; words[i]; i++) + free (words[i]); + free (words); + return s; +} diff --git a/readline/histfile.c b/readline/histfile.c new file mode 100644 index 00000000000..81dda57d0fe --- /dev/null +++ b/readline/histfile.c @@ -0,0 +1,366 @@ +/* histfile.c - functions to manipulate the history file. */ + +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* The goal is to make the implementation transparent, so that you + don't have to know what data types are used, just what functions + you can call. I think I have done that. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> + +#include <sys/types.h> +#ifndef _MINIX +# include <sys/file.h> +#endif +#include <sys/stat.h> +#include <fcntl.h> + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif + +#if defined (HAVE_STRING_H) +# include <string.h> +#else +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#if defined (__EMX__) +# ifndef O_BINARY +# define O_BINARY 0 +# endif +#else /* !__EMX__ */ + /* If we're not compiling for __EMX__, we don't want this at all. Ever. */ +# undef O_BINARY +# define O_BINARY 0 +#endif /* !__EMX__ */ + +#include <errno.h> +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#include "history.h" +#include "histlib.h" + +/* Functions imported from shell.c */ +extern char *get_env_value (); + +extern char *xmalloc (), *xrealloc (); + +/* Return the string that should be used in the place of this + filename. This only matters when you don't specify the + filename to read_history (), or write_history (). */ +static char * +history_filename (filename) + char *filename; +{ + char *return_val, *home; + int home_len; + + return_val = filename ? savestring (filename) : (char *)NULL; + + if (return_val) + return (return_val); + + home = get_env_value ("HOME"); + + if (home == 0) + { + home = "."; + home_len = 1; + } + else + home_len = strlen (home); + + return_val = xmalloc (2 + home_len + 8); /* strlen(".history") == 8 */ + strcpy (return_val, home); + return_val[home_len] = '/'; + strcpy (return_val + home_len + 1, ".history"); + + return (return_val); +} + +/* Add the contents of FILENAME to the history list, a line at a time. + If FILENAME is NULL, then read from ~/.history. Returns 0 if + successful, or errno if not. */ +int +read_history (filename) + char *filename; +{ + return (read_history_range (filename, 0, -1)); +} + +/* Read a range of lines from FILENAME, adding them to the history list. + Start reading at the FROM'th line and end at the TO'th. If FROM + is zero, start at the beginning. If TO is less than FROM, read + until the end of the file. If FILENAME is NULL, then read from + ~/.history. Returns 0 if successful, or errno if not. */ +int +read_history_range (filename, from, to) + char *filename; + int from, to; +{ + register int line_start, line_end; + char *input, *buffer; + int file, current_line; + struct stat finfo; + size_t file_size; + + buffer = (char *)NULL; + input = history_filename (filename); + file = open (input, O_RDONLY|O_BINARY, 0666); + + if ((file < 0) || (fstat (file, &finfo) == -1)) + goto error_and_exit; + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { +#if defined (EFBIG) + errno = EFBIG; +#endif + goto error_and_exit; + } + + buffer = xmalloc (file_size + 1); + if (read (file, buffer, file_size) != file_size) + { + error_and_exit: + if (file >= 0) + close (file); + + FREE (input); + FREE (buffer); + + return (errno); + } + + close (file); + + /* Set TO to larger than end of file if negative. */ + if (to < 0) + to = file_size; + + /* Start at beginning of file, work to end. */ + line_start = line_end = current_line = 0; + + /* Skip lines until we are at FROM. */ + while (line_start < file_size && current_line < from) + { + for (line_end = line_start; line_end < file_size; line_end++) + if (buffer[line_end] == '\n') + { + current_line++; + line_start = line_end + 1; + if (current_line == from) + break; + } + } + + /* If there are lines left to gobble, then gobble them now. */ + for (line_end = line_start; line_end < file_size; line_end++) + if (buffer[line_end] == '\n') + { + buffer[line_end] = '\0'; + + if (buffer[line_start]) + add_history (buffer + line_start); + + current_line++; + + if (current_line >= to) + break; + + line_start = line_end + 1; + } + + FREE (input); + FREE (buffer); + + return (0); +} + +/* Truncate the history file FNAME, leaving only LINES trailing lines. + If FNAME is NULL, then use ~/.history. */ +int +history_truncate_file (fname, lines) + char *fname; + register int lines; +{ + register int i; + int file, chars_read; + char *buffer, *filename; + struct stat finfo; + size_t file_size; + + buffer = (char *)NULL; + filename = history_filename (fname); + file = open (filename, O_RDONLY|O_BINARY, 0666); + + if (file == -1 || fstat (file, &finfo) == -1) + goto truncate_exit; + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { + close (file); +#if defined (EFBIG) + errno = EFBIG; +#endif + goto truncate_exit; + } + + buffer = xmalloc (file_size + 1); + chars_read = read (file, buffer, file_size); + close (file); + + if (chars_read <= 0) + goto truncate_exit; + + /* Count backwards from the end of buffer until we have passed + LINES lines. */ + for (i = chars_read - 1; lines && i; i--) + { + if (buffer[i] == '\n') + lines--; + } + + /* If this is the first line, then the file contains exactly the + number of lines we want to truncate to, so we don't need to do + anything. It's the first line if we don't find a newline between + the current value of i and 0. Otherwise, write from the start of + this line until the end of the buffer. */ + for ( ; i; i--) + if (buffer[i] == '\n') + { + i++; + break; + } + + /* Write only if there are more lines in the file than we want to + truncate to. */ + if (i && ((file = open (filename, O_WRONLY|O_TRUNC|O_BINARY, 0600)) != -1)) + { + write (file, buffer + i, file_size - i); + close (file); + } + + truncate_exit: + + FREE (buffer); + + free (filename); + return 0; +} + +/* Workhorse function for writing history. Writes NELEMENT entries + from the history list to FILENAME. OVERWRITE is non-zero if you + wish to replace FILENAME with the entries. */ +static int +history_do_write (filename, nelements, overwrite) + char *filename; + int nelements, overwrite; +{ + register int i; + char *output; + int file, mode; + + mode = overwrite ? O_WRONLY|O_CREAT|O_TRUNC|O_BINARY : O_WRONLY|O_APPEND|O_BINARY; + output = history_filename (filename); + + if ((file = open (output, mode, 0600)) == -1) + { + FREE (output); + return (errno); + } + + if (nelements > history_length) + nelements = history_length; + + /* Build a buffer of all the lines to write, and write them in one syscall. + Suggested by Peter Ho (peter@robosts.oxford.ac.uk). */ + { + HIST_ENTRY **the_history; /* local */ + register int j; + int buffer_size; + char *buffer; + + the_history = history_list (); + /* Calculate the total number of bytes to write. */ + for (buffer_size = 0, i = history_length - nelements; i < history_length; i++) + buffer_size += 1 + strlen (the_history[i]->line); + + /* Allocate the buffer, and fill it. */ + buffer = xmalloc (buffer_size); + + for (j = 0, i = history_length - nelements; i < history_length; i++) + { + strcpy (buffer + j, the_history[i]->line); + j += strlen (the_history[i]->line); + buffer[j++] = '\n'; + } + + write (file, buffer, buffer_size); + free (buffer); + } + + close (file); + + FREE (output); + + return (0); +} + +/* Append NELEMENT entries to FILENAME. The entries appended are from + the end of the list minus NELEMENTs up to the end of the list. */ +int +append_history (nelements, filename) + int nelements; + char *filename; +{ + return (history_do_write (filename, nelements, HISTORY_APPEND)); +} + +/* Overwrite FILENAME with the current history. If FILENAME is NULL, + then write the history list to ~/.history. Values returned + are as in read_history ().*/ +int +write_history (filename) + char *filename; +{ + return (history_do_write (filename, history_length, HISTORY_OVERWRITE)); +} diff --git a/readline/histlib.h b/readline/histlib.h new file mode 100644 index 00000000000..10a40d7919b --- /dev/null +++ b/readline/histlib.h @@ -0,0 +1,81 @@ +/* histlib.h -- internal definitions for the history library. */ +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_HISTLIB_H_) +#define _HISTLIB_H_ + +/* Function pointers can be declared as (Function *)foo. */ +#if !defined (_FUNCTION_DEF) +# define _FUNCTION_DEF +typedef int Function (); +typedef void VFunction (); +typedef char *CPFunction (); +typedef char **CPPFunction (); +#endif /* _FUNCTION_DEF */ + +#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) +#define STREQN(a, b, n) (((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) + +#ifndef savestring +# ifndef strcpy +extern char *strcpy (); +# endif +#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x)) +#endif + +#ifndef whitespace +#define whitespace(c) (((c) == ' ') || ((c) == '\t')) +#endif + +#ifndef _rl_digit_p +#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') +#endif + +#ifndef _rl_digit_value +#define _rl_digit_value(c) ((c) - '0') +#endif + +#ifndef member +# ifndef strchr +extern char *strchr (); +# endif +#define member(c, s) ((c) ? ((char *)strchr ((s), (c)) != (char *)NULL) : 0) +#endif + +#ifndef FREE +# define FREE(x) if (x) free (x) +#endif + +/* Possible history errors passed to hist_error. */ +#define EVENT_NOT_FOUND 0 +#define BAD_WORD_SPEC 1 +#define SUBST_FAILED 2 +#define BAD_MODIFIER 3 + +/* Possible definitions for history starting point specification. */ +#define ANCHORED_SEARCH 1 +#define NON_ANCHORED_SEARCH 0 + +/* Possible definitions for what style of writing the history file we want. */ +#define HISTORY_APPEND 0 +#define HISTORY_OVERWRITE 1 + +#endif /* !_HISTLIB_H_ */ diff --git a/readline/history.c b/readline/history.c new file mode 100644 index 00000000000..24c5a49c359 --- /dev/null +++ b/readline/history.c @@ -0,0 +1,388 @@ +/* History.c -- standalone history library */ + +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* The goal is to make the implementation transparent, so that you + don't have to know what data types are used, just what functions + you can call. I think I have done that. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include <sys/types.h> +# endif +# include <unistd.h> +#endif + +#if defined (HAVE_STRING_H) +# include <string.h> +#else +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#include "history.h" +#include "histlib.h" + +extern char *xmalloc (), *xrealloc (); + +/* The number of slots to increase the_history by. */ +#define DEFAULT_HISTORY_GROW_SIZE 50 + +/* **************************************************************** */ +/* */ +/* History Functions */ +/* */ +/* **************************************************************** */ + +/* An array of HIST_ENTRY. This is where we store the history. */ +static HIST_ENTRY **the_history = (HIST_ENTRY **)NULL; + +/* Non-zero means that we have enforced a limit on the amount of + history that we save. */ +static int history_stifled; + +/* If HISTORY_STIFLED is non-zero, then this is the maximum number of + entries to remember. */ +int max_input_history; + +/* The current location of the interactive history pointer. Just makes + life easier for outside callers. */ +int history_offset; + +/* The number of strings currently stored in the history list. */ +int history_length; + +/* The current number of slots allocated to the input_history. */ +static int history_size; + +/* The logical `base' of the history array. It defaults to 1. */ +int history_base = 1; + +/* Return the current HISTORY_STATE of the history. */ +HISTORY_STATE * +history_get_history_state () +{ + HISTORY_STATE *state; + + state = (HISTORY_STATE *)xmalloc (sizeof (HISTORY_STATE)); + state->entries = the_history; + state->offset = history_offset; + state->length = history_length; + state->size = history_size; + state->flags = 0; + if (history_stifled) + state->flags |= HS_STIFLED; + + return (state); +} + +/* Set the state of the current history array to STATE. */ +void +history_set_history_state (state) + HISTORY_STATE *state; +{ + the_history = state->entries; + history_offset = state->offset; + history_length = state->length; + history_size = state->size; + if (state->flags & HS_STIFLED) + history_stifled = 1; +} + +/* Begin a session in which the history functions might be used. This + initializes interactive variables. */ +void +using_history () +{ + history_offset = history_length; +} + +/* Return the number of bytes that the primary history entries are using. + This just adds up the lengths of the_history->lines. */ +int +history_total_bytes () +{ + register int i, result; + + result = 0; + + for (i = 0; the_history && the_history[i]; i++) + result += strlen (the_history[i]->line); + + return (result); +} + +/* Returns the magic number which says what history element we are + looking at now. In this implementation, it returns history_offset. */ +int +where_history () +{ + return (history_offset); +} + +/* Make the current history item be the one at POS, an absolute index. + Returns zero if POS is out of range, else non-zero. */ +int +history_set_pos (pos) + int pos; +{ + if (pos > history_length || pos < 0 || !the_history) + return (0); + history_offset = pos; + return (1); +} + +/* Return the current history array. The caller has to be carefull, since this + is the actual array of data, and could be bashed or made corrupt easily. + The array is terminated with a NULL pointer. */ +HIST_ENTRY ** +history_list () +{ + return (the_history); +} + +/* Return the history entry at the current position, as determined by + history_offset. If there is no entry there, return a NULL pointer. */ +HIST_ENTRY * +current_history () +{ + return ((history_offset == history_length) || the_history == 0) + ? (HIST_ENTRY *)NULL + : the_history[history_offset]; +} + +/* Back up history_offset to the previous history entry, and return + a pointer to that entry. If there is no previous entry then return + a NULL pointer. */ +HIST_ENTRY * +previous_history () +{ + return history_offset ? the_history[--history_offset] : (HIST_ENTRY *)NULL; +} + +/* Move history_offset forward to the next history entry, and return + a pointer to that entry. If there is no next entry then return a + NULL pointer. */ +HIST_ENTRY * +next_history () +{ + return (history_offset == history_length) ? (HIST_ENTRY *)NULL : the_history[++history_offset]; +} + +/* Return the history entry which is logically at OFFSET in the history array. + OFFSET is relative to history_base. */ +HIST_ENTRY * +history_get (offset) + int offset; +{ + int local_index; + + local_index = offset - history_base; + return (local_index >= history_length || local_index < 0 || !the_history) + ? (HIST_ENTRY *)NULL + : the_history[local_index]; +} + +/* Place STRING at the end of the history list. The data field + is set to NULL. */ +void +add_history (string) + char *string; +{ + HIST_ENTRY *temp; + + if (history_stifled && (history_length == max_input_history)) + { + register int i; + + /* If the history is stifled, and history_length is zero, + and it equals max_input_history, we don't save items. */ + if (history_length == 0) + return; + + /* If there is something in the slot, then remove it. */ + if (the_history[0]) + { + free (the_history[0]->line); + free (the_history[0]); + } + + /* Copy the rest of the entries, moving down one slot. */ + for (i = 0; i < history_length; i++) + the_history[i] = the_history[i + 1]; + + history_base++; + } + else + { + if (history_size == 0) + { + history_size = DEFAULT_HISTORY_GROW_SIZE; + the_history = (HIST_ENTRY **)xmalloc (history_size * sizeof (HIST_ENTRY *)); + history_length = 1; + } + else + { + if (history_length == (history_size - 1)) + { + history_size += DEFAULT_HISTORY_GROW_SIZE; + the_history = (HIST_ENTRY **) + xrealloc (the_history, history_size * sizeof (HIST_ENTRY *)); + } + history_length++; + } + } + + temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + temp->line = savestring (string); + temp->data = (char *)NULL; + + the_history[history_length] = (HIST_ENTRY *)NULL; + the_history[history_length - 1] = temp; +} + +/* Make the history entry at WHICH have LINE and DATA. This returns + the old entry so you can dispose of the data. In the case of an + invalid WHICH, a NULL pointer is returned. */ +HIST_ENTRY * +replace_history_entry (which, line, data) + int which; + char *line; + char *data; +{ + HIST_ENTRY *temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + HIST_ENTRY *old_value; + + if (which >= history_length) + return ((HIST_ENTRY *)NULL); + + old_value = the_history[which]; + + temp->line = savestring (line); + temp->data = data; + the_history[which] = temp; + + return (old_value); +} + +/* Remove history element WHICH from the history. The removed + element is returned to you so you can free the line, data, + and containing structure. */ +HIST_ENTRY * +remove_history (which) + int which; +{ + HIST_ENTRY *return_value; + + if (which >= history_length || !history_length) + return_value = (HIST_ENTRY *)NULL; + else + { + register int i; + return_value = the_history[which]; + + for (i = which; i < history_length; i++) + the_history[i] = the_history[i + 1]; + + history_length--; + } + + return (return_value); +} + +/* Stifle the history list, remembering only MAX number of lines. */ +void +stifle_history (max) + int max; +{ + if (max < 0) + max = 0; + + if (history_length > max) + { + register int i, j; + + /* This loses because we cannot free the data. */ + for (i = 0, j = history_length - max; i < j; i++) + { + free (the_history[i]->line); + free (the_history[i]); + } + + history_base = i; + for (j = 0, i = history_length - max; j < max; i++, j++) + the_history[j] = the_history[i]; + the_history[j] = (HIST_ENTRY *)NULL; + history_length = j; + } + + history_stifled = 1; + max_input_history = max; +} + +/* Stop stifling the history. This returns the previous amount the + history was stifled by. The value is positive if the history was + stifled, negative if it wasn't. */ +int +unstifle_history () +{ + if (history_stifled) + { + history_stifled = 0; + return (-max_input_history); + } + + return (max_input_history); +} + +int +history_is_stifled () +{ + return (history_stifled); +} + +void +clear_history () +{ + register int i; + + /* This loses because we cannot free the data. */ + for (i = 0; i < history_length; i++) + { + free (the_history[i]->line); + free (the_history[i]); + the_history[i] = (HIST_ENTRY *)NULL; + } + + history_offset = history_length = 0; +} diff --git a/readline/history.h b/readline/history.h new file mode 100644 index 00000000000..e49a341492f --- /dev/null +++ b/readline/history.h @@ -0,0 +1,223 @@ +/* History.h -- the names of functions that you can call in history. */ +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef _HISTORY_H_ +#define _HISTORY_H_ + +#if !defined (_FUNCTION_DEF) +# define _FUNCTION_DEF +typedef int Function (); +typedef void VFunction (); +typedef char *CPFunction (); +typedef char **CPPFunction (); +#endif + +/* The structure used to store a history entry. */ +typedef struct _hist_entry { + char *line; + char *data; +} HIST_ENTRY; + +/* A structure used to pass the current state of the history stuff around. */ +typedef struct _hist_state { + HIST_ENTRY **entries; /* Pointer to the entries themselves. */ + int offset; /* The location pointer within this array. */ + int length; /* Number of elements within this array. */ + int size; /* Number of slots allocated to this array. */ + int flags; +} HISTORY_STATE; + +/* Flag values for the `flags' member of HISTORY_STATE. */ +#define HS_STIFLED 0x01 + +/* Initialization and state management. */ + +/* Begin a session in which the history functions might be used. This + just initializes the interactive variables. */ +extern void using_history (); + +/* Return the current HISTORY_STATE of the history. */ +extern HISTORY_STATE *history_get_history_state (); + +/* Set the state of the current history array to STATE. */ +extern void history_set_history_state (); + +/* Manage the history list. */ + +/* Place STRING at the end of the history list. + The associated data field (if any) is set to NULL. */ +extern void add_history (); + +/* A reasonably useless function, only here for completeness. WHICH + is the magic number that tells us which element to delete. The + elements are numbered from 0. */ +extern HIST_ENTRY *remove_history (); + +/* Make the history entry at WHICH have LINE and DATA. This returns + the old entry so you can dispose of the data. In the case of an + invalid WHICH, a NULL pointer is returned. */ +extern HIST_ENTRY *replace_history_entry (); + +/* Clear the history list and start over. */ +extern void clear_history (); + +/* Stifle the history list, remembering only MAX number of entries. */ +extern void stifle_history (); + +/* Stop stifling the history. This returns the previous amount the + history was stifled by. The value is positive if the history was + stifled, negative if it wasn't. */ +extern int unstifle_history (); + +/* Return 1 if the history is stifled, 0 if it is not. */ +extern int history_is_stifled (); + +/* Information about the history list. */ + +/* Return a NULL terminated array of HIST_ENTRY which is the current input + history. Element 0 of this list is the beginning of time. If there + is no history, return NULL. */ +extern HIST_ENTRY **history_list (); + +/* Returns the number which says what history element we are now + looking at. */ +extern int where_history (); + +/* Return the history entry at the current position, as determined by + history_offset. If there is no entry there, return a NULL pointer. */ +HIST_ENTRY *current_history (); + +/* Return the history entry which is logically at OFFSET in the history + array. OFFSET is relative to history_base. */ +extern HIST_ENTRY *history_get (); + +/* Return the number of bytes that the primary history entries are using. + This just adds up the lengths of the_history->lines. */ +extern int history_total_bytes (); + +/* Moving around the history list. */ + +/* Set the position in the history list to POS. */ +int history_set_pos (); + +/* Back up history_offset to the previous history entry, and return + a pointer to that entry. If there is no previous entry, return + a NULL pointer. */ +extern HIST_ENTRY *previous_history (); + +/* Move history_offset forward to the next item in the input_history, + and return the a pointer to that entry. If there is no next entry, + return a NULL pointer. */ +extern HIST_ENTRY *next_history (); + +/* Searching the history list. */ + +/* Search the history for STRING, starting at history_offset. + If DIRECTION < 0, then the search is through previous entries, + else through subsequent. If the string is found, then + current_history () is the history entry, and the value of this function + is the offset in the line of that history entry that the string was + found in. Otherwise, nothing is changed, and a -1 is returned. */ +extern int history_search (); + +/* Search the history for STRING, starting at history_offset. + The search is anchored: matching lines must begin with string. */ +extern int history_search_prefix (); + +/* Search for STRING in the history list, starting at POS, an + absolute index into the list. DIR, if negative, says to search + backwards from POS, else forwards. + Returns the absolute index of the history element where STRING + was found, or -1 otherwise. */ +extern int history_search_pos (); + +/* Managing the history file. */ + +/* Add the contents of FILENAME to the history list, a line at a time. + If FILENAME is NULL, then read from ~/.history. Returns 0 if + successful, or errno if not. */ +extern int read_history (); + +/* Read a range of lines from FILENAME, adding them to the history list. + Start reading at the FROM'th line and end at the TO'th. If FROM + is zero, start at the beginning. If TO is less than FROM, read + until the end of the file. If FILENAME is NULL, then read from + ~/.history. Returns 0 if successful, or errno if not. */ +extern int read_history_range (); + +/* Write the current history to FILENAME. If FILENAME is NULL, + then write the history list to ~/.history. Values returned + are as in read_history (). */ +extern int write_history (); + +/* Append NELEMENT entries to FILENAME. The entries appended are from + the end of the list minus NELEMENTs up to the end of the list. */ +int append_history (); + +/* Truncate the history file, leaving only the last NLINES lines. */ +extern int history_truncate_file (); + +/* History expansion. */ + +/* Expand the string STRING, placing the result into OUTPUT, a pointer + to a string. Returns: + + 0) If no expansions took place (or, if the only change in + the text was the de-slashifying of the history expansion + character) + 1) If expansions did take place + -1) If there was an error in expansion. + 2) If the returned line should just be printed. + + If an error ocurred in expansion, then OUTPUT contains a descriptive + error message. */ +extern int history_expand (); + +/* Extract a string segment consisting of the FIRST through LAST + arguments present in STRING. Arguments are broken up as in + the shell. */ +extern char *history_arg_extract (); + +/* Return the text of the history event beginning at the current + offset into STRING. */ +extern char *get_history_event (); + +/* Return an array of tokens, much as the shell might. The tokens are + parsed out of STRING. */ +extern char **history_tokenize (); + +/* Exported history variables. */ +extern int history_base; +extern int history_length; +extern int max_input_history; +extern char history_expansion_char; +extern char history_subst_char; +extern char history_comment_char; +extern char *history_no_expand_chars; +extern char *history_search_delimiter_chars; +extern int history_quotes_inhibit_expansion; + +/* If set, this function is called to decide whether or not a particular + history expansion should be treated as a special case for the calling + application and not expanded. */ +extern Function *history_inhibit_expansion_function; + +#endif /* !_HISTORY_H_ */ diff --git a/readline/histsearch.c b/readline/histsearch.c new file mode 100644 index 00000000000..7e98e950acb --- /dev/null +++ b/readline/histsearch.c @@ -0,0 +1,200 @@ +/* histsearch.c -- searching the history list. */ + +/* Copyright (C) 1989, 1992 Free Software Foundation, Inc. + + This file contains the GNU History Library (the Library), a set of + routines for managing the text of previously typed lines. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include <sys/types.h> +# endif +# include <unistd.h> +#endif +#if defined (HAVE_STRING_H) +# include <string.h> +#else +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#include "history.h" +#include "histlib.h" + +/* Variables imported from other history library files. */ +extern int history_offset; + +/* The list of alternate characters that can delimit a history search + string. */ +char *history_search_delimiter_chars = (char *)NULL; + +/* Search the history for STRING, starting at history_offset. + If DIRECTION < 0, then the search is through previous entries, else + through subsequent. If ANCHORED is non-zero, the string must + appear at the beginning of a history line, otherwise, the string + may appear anywhere in the line. If the string is found, then + current_history () is the history entry, and the value of this + function is the offset in the line of that history entry that the + string was found in. Otherwise, nothing is changed, and a -1 is + returned. */ + +static int +history_search_internal (string, direction, anchored) + char *string; + int direction, anchored; +{ + register int i, reverse; + register char *line; + register int line_index; + int string_len; + HIST_ENTRY **the_history; /* local */ + + i = history_offset; + reverse = (direction < 0); + + /* Take care of trivial cases first. */ + if (string == 0 || *string == '\0') + return (-1); + + if (!history_length || ((i == history_length) && !reverse)) + return (-1); + + if (reverse && (i == history_length)) + i--; + +#define NEXT_LINE() do { if (reverse) i--; else i++; } while (0) + + the_history = history_list (); + string_len = strlen (string); + while (1) + { + /* Search each line in the history list for STRING. */ + + /* At limit for direction? */ + if ((reverse && i < 0) || (!reverse && i == history_length)) + return (-1); + + line = the_history[i]->line; + line_index = strlen (line); + + /* If STRING is longer than line, no match. */ + if (string_len > line_index) + { + NEXT_LINE (); + continue; + } + + /* Handle anchored searches first. */ + if (anchored == ANCHORED_SEARCH) + { + if (STREQN (string, line, string_len)) + { + history_offset = i; + return (0); + } + + NEXT_LINE (); + continue; + } + + /* Do substring search. */ + if (reverse) + { + line_index -= string_len; + + while (line_index >= 0) + { + if (STREQN (string, line + line_index, string_len)) + { + history_offset = i; + return (line_index); + } + line_index--; + } + } + else + { + register int limit; + + limit = line_index - string_len + 1; + line_index = 0; + + while (line_index < limit) + { + if (STREQN (string, line + line_index, string_len)) + { + history_offset = i; + return (line_index); + } + line_index++; + } + } + NEXT_LINE (); + } +} + +/* Do a non-anchored search for STRING through the history in DIRECTION. */ +int +history_search (string, direction) + char *string; + int direction; +{ + return (history_search_internal (string, direction, NON_ANCHORED_SEARCH)); +} + +/* Do an anchored search for string through the history in DIRECTION. */ +int +history_search_prefix (string, direction) + char *string; + int direction; +{ + return (history_search_internal (string, direction, ANCHORED_SEARCH)); +} + +/* Search for STRING in the history list. DIR is < 0 for searching + backwards. POS is an absolute index into the history list at + which point to begin searching. */ +int +history_search_pos (string, dir, pos) + char *string; + int dir, pos; +{ + int ret, old; + + old = where_history (); + history_set_pos (pos); + if (history_search (string, dir) == -1) + { + history_set_pos (old); + return (-1); + } + ret = where_history (); + history_set_pos (old); + return ret; +} diff --git a/readline/input.c b/readline/input.c new file mode 100644 index 00000000000..7e3c0feb5ce --- /dev/null +++ b/readline/input.c @@ -0,0 +1,449 @@ +/* input.c -- character input functions for readline. */ + +/* Copyright (C) 1994 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include <fcntl.h> +#if defined (HAVE_SYS_FILE_H) +# include <sys/file.h> +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_SELECT) +# if !defined (HAVE_SYS_SELECT_H) || !defined (M_UNIX) +# include <sys/time.h> +# endif +#endif /* HAVE_SELECT */ +#if defined (HAVE_SYS_SELECT_H) +# include <sys/select.h> +#endif + +#if defined (FIONREAD_IN_SYS_IOCTL) +# include <sys/ioctl.h> +#endif + +#include <stdio.h> +#include <errno.h> + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" + +/* What kind of non-blocking I/O do we have? */ +#if !defined (O_NDELAY) && defined (O_NONBLOCK) +# define O_NDELAY O_NONBLOCK /* Posix style */ +#endif + +/* Functions imported from other files in the library. */ +extern char *xmalloc (), *xrealloc (); + +/* Variables and functions from macro.c. */ +extern void _rl_add_macro_char (); +extern void _rl_with_macro_input (); +extern int _rl_next_macro_key (); +extern int _rl_defining_kbd_macro; + +#if defined (VI_MODE) +extern void _rl_vi_set_last (); +extern int _rl_vi_textmod_command (); +#endif /* VI_MODE */ + +extern FILE *rl_instream, *rl_outstream; +extern Function *rl_last_func; +extern int rl_key_sequence_length; +extern int rl_pending_input; +extern int rl_editing_mode; + +extern Keymap _rl_keymap; + +extern int _rl_convert_meta_chars_to_ascii; + +#if defined (__GO32__) +# include <pc.h> +#endif /* __GO32__ */ + +/* Non-null means it is a pointer to a function to run while waiting for + character input. */ +Function *rl_event_hook = (Function *)NULL; + +Function *rl_getc_function = rl_getc; + +/* **************************************************************** */ +/* */ +/* Character Input Buffering */ +/* */ +/* **************************************************************** */ + +static int pop_index, push_index; +static unsigned char ibuffer[512]; +static int ibuffer_len = sizeof (ibuffer) - 1; + +#define any_typein (push_index != pop_index) + +int +_rl_any_typein () +{ + return any_typein; +} + +/* Add KEY to the buffer of characters to be read. */ +int +rl_stuff_char (key) + int key; +{ + if (key == EOF) + { + key = NEWLINE; + rl_pending_input = EOF; + } + ibuffer[push_index++] = key; + if (push_index >= ibuffer_len) + push_index = 0; + return push_index; +} + +/* Make C be the next command to be executed. */ +int +rl_execute_next (c) + int c; +{ + rl_pending_input = c; + return 0; +} + +/* Return the amount of space available in the + buffer for stuffing characters. */ +static int +ibuffer_space () +{ + if (pop_index > push_index) + return (pop_index - push_index); + else + return (ibuffer_len - (push_index - pop_index)); +} + +/* Get a key from the buffer of characters to be read. + Return the key in KEY. + Result is KEY if there was a key, or 0 if there wasn't. */ +static int +rl_get_char (key) + int *key; +{ + if (push_index == pop_index) + return (0); + + *key = ibuffer[pop_index++]; + + if (pop_index >= ibuffer_len) + pop_index = 0; + + return (1); +} + +/* Stuff KEY into the *front* of the input buffer. + Returns non-zero if successful, zero if there is + no space left in the buffer. */ +static int +rl_unget_char (key) + int key; +{ + if (ibuffer_space ()) + { + pop_index--; + if (pop_index < 0) + pop_index = ibuffer_len - 1; + ibuffer[pop_index] = key; + return (1); + } + return (0); +} + +/* If a character is available to be read, then read it + and stuff it into IBUFFER. Otherwise, just return. */ +static void +rl_gather_tyi () +{ +#if defined (__GO32__) + char input; + + if (isatty (0) && kbhit () && ibuffer_space ()) + { + int i; + i = (*rl_getc_function) (rl_instream); + rl_stuff_char (i); + } +#else /* !__GO32__ */ + + int tty; + register int tem, result; + int chars_avail; + char input; +#if defined(HAVE_SELECT) + fd_set readfds, exceptfds; + struct timeval timeout; +#endif + + tty = fileno (rl_instream); + +#if defined (HAVE_SELECT) + FD_ZERO (&readfds); + FD_ZERO (&exceptfds); + FD_SET (tty, &readfds); + FD_SET (tty, &exceptfds); + timeout.tv_sec = 0; + timeout.tv_usec = 100000; /* 0.1 seconds */ + if (select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout) <= 0) + return; /* Nothing to read. */ +#endif + + result = -1; +#if defined (FIONREAD) + result = ioctl (tty, FIONREAD, &chars_avail); +#endif + +#if defined (O_NDELAY) + if (result == -1) + { + tem = fcntl (tty, F_GETFL, 0); + + fcntl (tty, F_SETFL, (tem | O_NDELAY)); + chars_avail = read (tty, &input, 1); + + fcntl (tty, F_SETFL, tem); + if (chars_avail == -1 && errno == EAGAIN) + return; + } +#endif /* O_NDELAY */ + + /* If there's nothing available, don't waste time trying to read + something. */ + if (chars_avail <= 0) + return; + + tem = ibuffer_space (); + + if (chars_avail > tem) + chars_avail = tem; + + /* One cannot read all of the available input. I can only read a single + character at a time, or else programs which require input can be + thwarted. If the buffer is larger than one character, I lose. + Damn! */ + if (tem < ibuffer_len) + chars_avail = 0; + + if (result != -1) + { + while (chars_avail--) + rl_stuff_char ((*rl_getc_function) (rl_instream)); + } + else + { + if (chars_avail) + rl_stuff_char (input); + } +#endif /* !__GO32__ */ +} + +/* Is there input available to be read on the readline input file + descriptor? Only works if the system has select(2) or FIONREAD. */ +int +_rl_input_available () +{ +#if defined(HAVE_SELECT) + fd_set readfds, exceptfds; + struct timeval timeout; +#endif +#if defined(FIONREAD) + int chars_avail; +#endif + int tty; + + tty = fileno (rl_instream); + +#if defined (HAVE_SELECT) + FD_ZERO (&readfds); + FD_ZERO (&exceptfds); + FD_SET (tty, &readfds); + FD_SET (tty, &exceptfds); + timeout.tv_sec = 0; + timeout.tv_usec = 100000; /* 0.1 seconds */ + return (select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout) > 0); +#endif + +#if defined (FIONREAD) + if (ioctl (tty, FIONREAD, &chars_avail) == 0) + return (chars_avail); +#endif + + return 0; +} + +void +_rl_insert_typein (c) + int c; +{ + int key, t, i; + char *string; + + i = key = 0; + string = xmalloc (ibuffer_len + 1); + string[i++] = (char) c; + + while ((t = rl_get_char (&key)) && + _rl_keymap[key].type == ISFUNC && + _rl_keymap[key].function == rl_insert) + string[i++] = key; + + if (t) + rl_unget_char (key); + + string[i] = '\0'; + rl_insert_text (string); + free (string); +} + +/* **************************************************************** */ +/* */ +/* Character Input */ +/* */ +/* **************************************************************** */ + +/* Read a key, including pending input. */ +int +rl_read_key () +{ + int c; + + rl_key_sequence_length++; + + if (rl_pending_input) + { + c = rl_pending_input; + rl_pending_input = 0; + } + else + { + /* If input is coming from a macro, then use that. */ + if (c = _rl_next_macro_key ()) + return (c); + + /* If the user has an event function, then call it periodically. */ + if (rl_event_hook) + { + while (rl_event_hook && rl_get_char (&c) == 0) + { + (*rl_event_hook) (); + rl_gather_tyi (); + } + } + else + { + if (rl_get_char (&c) == 0) + c = (*rl_getc_function) (rl_instream); + } + } + + return (c); +} + +int +rl_getc (stream) + FILE *stream; +{ + int result, flags; + unsigned char c; + +#if defined (__GO32__) + if (isatty (0)) + return (getkey () & 0x7F); +#endif /* __GO32__ */ + + while (1) + { + result = read (fileno (stream), &c, sizeof (unsigned char)); + + if (result == sizeof (unsigned char)) + return (c); + + /* If zero characters are returned, then the file that we are + reading from is empty! Return EOF in that case. */ + if (result == 0) + return (EOF); + +#if defined (EWOULDBLOCK) + if (errno == EWOULDBLOCK) + { + if ((flags = fcntl (fileno (stream), F_GETFL, 0)) < 0) + return (EOF); + if (flags & O_NDELAY) + { + flags &= ~O_NDELAY; + fcntl (fileno (stream), F_SETFL, flags); + continue; + } + continue; + } +#endif /* EWOULDBLOCK */ + +#if defined (_POSIX_VERSION) && defined (EAGAIN) && defined (O_NONBLOCK) + if (errno == EAGAIN) + { + if ((flags = fcntl (fileno (stream), F_GETFL, 0)) < 0) + return (EOF); + if (flags & O_NONBLOCK) + { + flags &= ~O_NONBLOCK; + fcntl (fileno (stream), F_SETFL, flags); + continue; + } + } +#endif /* _POSIX_VERSION && EAGAIN && O_NONBLOCK */ + +#if !defined (__GO32__) + /* If the error that we received was SIGINT, then try again, + this is simply an interrupted system call to read (). + Otherwise, some error ocurred, also signifying EOF. */ + if (errno != EINTR) + return (EOF); +#endif /* !__GO32__ */ + } +} diff --git a/readline/isearch.c b/readline/isearch.c new file mode 100644 index 00000000000..7decf9595b0 --- /dev/null +++ b/readline/isearch.c @@ -0,0 +1,433 @@ +/* **************************************************************** */ +/* */ +/* I-Search and Searching */ +/* */ +/* **************************************************************** */ + +/* Copyright (C) 1987,1989 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#include <stdio.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif + +#include "rldefs.h" +#include "readline.h" +#include "history.h" + +/* Variables imported from other files in the readline library. */ +extern Keymap _rl_keymap; +extern HIST_ENTRY *saved_line_for_history; +extern int rl_line_buffer_len; +extern int rl_point, rl_end; +extern char *rl_line_buffer; + +extern void _rl_save_prompt (); +extern void _rl_restore_prompt (); + +extern int rl_execute_next (); +extern void rl_extend_line_buffer (); + +extern int _rl_input_available (); + +extern char *xmalloc (), *xrealloc (); + +static int rl_search_history (); + +/* Last line found by the current incremental search, so we don't `find' + identical lines many times in a row. */ +static char *prev_line_found; + +/* Search backwards through the history looking for a string which is typed + interactively. Start with the current line. */ +int +rl_reverse_search_history (sign, key) + int sign, key; +{ + return (rl_search_history (-sign, key)); +} + +/* Search forwards through the history looking for a string which is typed + interactively. Start with the current line. */ +int +rl_forward_search_history (sign, key) + int sign, key; +{ + return (rl_search_history (sign, key)); +} + +/* Display the current state of the search in the echo-area. + SEARCH_STRING contains the string that is being searched for, + DIRECTION is zero for forward, or 1 for reverse, + WHERE is the history list number of the current line. If it is + -1, then this line is the starting one. */ +static void +rl_display_search (search_string, reverse_p, where) + char *search_string; + int reverse_p, where; +{ + char *message; + int msglen, searchlen; + + searchlen = (search_string && *search_string) ? strlen (search_string) : 0; + + message = xmalloc (searchlen + 33); + msglen = 0; + +#if defined (NOTDEF) + if (where != -1) + { + sprintf (message, "[%d]", where + history_base); + msglen = strlen (message); + } +#endif /* NOTDEF */ + + message[msglen++] = '('; + + if (reverse_p) + { + strcpy (message + msglen, "reverse-"); + msglen += 8; + } + + strcpy (message + msglen, "i-search)`"); + msglen += 10; + + if (search_string) + { + strcpy (message + msglen, search_string); + msglen += searchlen; + } + + strcpy (message + msglen, "': "); + + rl_message ("%s", message, 0); + free (message); + (*rl_redisplay_function) (); +} + +/* Search through the history looking for an interactively typed string. + This is analogous to i-search. We start the search in the current line. + DIRECTION is which direction to search; >= 0 means forward, < 0 means + backwards. */ +static int +rl_search_history (direction, invoking_key) + int direction, invoking_key; +{ + /* The string that the user types in to search for. */ + char *search_string; + + /* The current length of SEARCH_STRING. */ + int search_string_index; + + /* The amount of space that SEARCH_STRING has allocated to it. */ + int search_string_size; + + /* The list of lines to search through. */ + char **lines, *allocated_line; + + /* The length of LINES. */ + int hlen; + + /* Where we get LINES from. */ + HIST_ENTRY **hlist; + + register int i; + int orig_point, orig_line, last_found_line; + int c, found, failed, sline_len; + + /* The line currently being searched. */ + char *sline; + + /* Offset in that line. */ + int line_index; + + /* Non-zero if we are doing a reverse search. */ + int reverse; + + orig_point = rl_point; + last_found_line = orig_line = where_history (); + reverse = direction < 0; + hlist = history_list (); + allocated_line = (char *)NULL; + + /* Create an arrary of pointers to the lines that we want to search. */ + maybe_replace_line (); + i = 0; + if (hlist) + for (i = 0; hlist[i]; i++); + + /* Allocate space for this many lines, +1 for the current input line, + and remember those lines. */ + lines = (char **)xmalloc ((1 + (hlen = i)) * sizeof (char *)); + for (i = 0; i < hlen; i++) + lines[i] = hlist[i]->line; + + if (saved_line_for_history) + lines[i] = saved_line_for_history->line; + else + { + /* Keep track of this so we can free it. */ + allocated_line = xmalloc (1 + strlen (rl_line_buffer)); + strcpy (allocated_line, &rl_line_buffer[0]); + lines[i] = allocated_line; + } + + hlen++; + + /* The line where we start the search. */ + i = orig_line; + + _rl_save_prompt (); + + /* Initialize search parameters. */ + search_string = xmalloc (search_string_size = 128); + *search_string = '\0'; + search_string_index = 0; + prev_line_found = (char *)0; /* XXX */ + + /* Normalize DIRECTION into 1 or -1. */ + direction = (direction >= 0) ? 1 : -1; + + rl_display_search (search_string, reverse, -1); + + sline = rl_line_buffer; + sline_len = strlen (sline); + line_index = rl_point; + + found = failed = 0; + for (;;) + { + Function *f = (Function *)NULL; + + /* Read a key and decide how to proceed. */ + c = rl_read_key (); + + if (_rl_keymap[c].type == ISFUNC) + { + f = _rl_keymap[c].function; + + if (f == rl_reverse_search_history) + c = reverse ? -1 : -2; + else if (f == rl_forward_search_history) + c = !reverse ? -1 : -2; + } + + /* Let NEWLINE (^J) terminate the search for people who don't like + using ESC. ^M can still be used to terminate the search and + immediately execute the command. */ + if (c == ESC || c == NEWLINE) + { + /* ESC still terminates the search, but if there is pending + input or if input arrives within 0.1 seconds (on systems + with select(2)) it is used as a prefix character + with rl_execute_next. WATCH OUT FOR THIS! This is intended + to allow the arrow keys to be used like ^F and ^B are used + to terminate the search and execute the movement command. */ + if (c == ESC && _rl_input_available ()) /* XXX */ + rl_execute_next (ESC); + break; + } + + if (c >= 0 && (CTRL_CHAR (c) || META_CHAR (c) || c == RUBOUT) && c != CTRL ('G')) + { + rl_execute_next (c); + break; + } + + switch (c) + { + case -1: + if (search_string_index == 0) + continue; + else if (reverse) + --line_index; + else if (line_index != sline_len) + ++line_index; + else + ding (); + break; + + /* switch directions */ + case -2: + direction = -direction; + reverse = direction < 0; + break; + + case CTRL ('G'): + strcpy (rl_line_buffer, lines[orig_line]); + rl_point = orig_point; + rl_end = strlen (rl_line_buffer); + _rl_restore_prompt(); + rl_clear_message (); + if (allocated_line) + free (allocated_line); + free (lines); + return 0; + +#if 0 + /* delete character from search string. */ + case -3: + if (search_string_index == 0) + ding (); + else + { + search_string[--search_string_index] = '\0'; + /* This is tricky. To do this right, we need to keep a + stack of search positions for the current search, with + sentinels marking the beginning and end. */ + } + break; +#endif + + default: + /* Add character to search string and continue search. */ + if (search_string_index + 2 >= search_string_size) + { + search_string_size += 128; + search_string = xrealloc (search_string, search_string_size); + } + search_string[search_string_index++] = c; + search_string[search_string_index] = '\0'; + break; + } + + for (found = failed = 0;;) + { + int limit = sline_len - search_string_index + 1; + + /* Search the current line. */ + while (reverse ? (line_index >= 0) : (line_index < limit)) + { + if (STREQN (search_string, sline + line_index, search_string_index)) + { + found++; + break; + } + else + line_index += direction; + } + if (found) + break; + + /* Move to the next line, but skip new copies of the line + we just found and lines shorter than the string we're + searching for. */ + do + { + /* Move to the next line. */ + i += direction; + + /* At limit for direction? */ + if (reverse ? (i < 0) : (i == hlen)) + { + failed++; + break; + } + + /* We will need these later. */ + sline = lines[i]; + sline_len = strlen (sline); + } + while ((prev_line_found && STREQ (prev_line_found, lines[i])) || + (search_string_index > sline_len)); + + if (failed) + break; + + /* Now set up the line for searching... */ + line_index = reverse ? sline_len - search_string_index : 0; + } + + if (failed) + { + /* We cannot find the search string. Ding the bell. */ + ding (); + i = last_found_line; + continue; /* XXX - was break */ + } + + /* We have found the search string. Just display it. But don't + actually move there in the history list until the user accepts + the location. */ + if (found) + { + int line_len; + + prev_line_found = lines[i]; + line_len = strlen (lines[i]); + + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + + strcpy (rl_line_buffer, lines[i]); + rl_point = line_index; + rl_end = line_len; + last_found_line = i; + rl_display_search (search_string, reverse, (i == orig_line) ? -1 : i); + } + } + + /* The searching is over. The user may have found the string that she + was looking for, or else she may have exited a failing search. If + LINE_INDEX is -1, then that shows that the string searched for was + not found. We use this to determine where to place rl_point. */ + + /* First put back the original state. */ + strcpy (rl_line_buffer, lines[orig_line]); + + _rl_restore_prompt (); + + /* Free the search string. */ + free (search_string); + + if (last_found_line < orig_line) + rl_get_previous_history (orig_line - last_found_line); + else + rl_get_next_history (last_found_line - orig_line); + + /* If the string was not found, put point at the end of the line. */ + if (line_index < 0) + line_index = strlen (rl_line_buffer); + rl_point = line_index; + rl_clear_message (); + + if (allocated_line) + free (allocated_line); + free (lines); + + return 0; +} diff --git a/readline/keymaps.c b/readline/keymaps.c new file mode 100644 index 00000000000..9359749ddc0 --- /dev/null +++ b/readline/keymaps.c @@ -0,0 +1,150 @@ +/* keymaps.c -- Functions and keymaps for the GNU Readline library. */ + +/* Copyright (C) 1988,1989 Free Software Foundation, Inc. + + This file is part of GNU Readline, a library for reading lines + of text with interactive input and history editing. + + Readline is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 1, or (at your option) any + later version. + + Readline is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline; see the file COPYING. If not, write to the Free + Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "rlconf.h" +#include "keymaps.h" +#include "emacs_keymap.c" + +#if defined (VI_MODE) +#include "vi_keymap.c" +#endif + +extern int rl_do_lowercase_version (); +extern int rl_rubout (), rl_insert (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Functions for manipulating Keymaps. */ +/* */ +/* **************************************************************** */ + + +/* Return a new, empty keymap. + Free it with free() when you are done. */ +Keymap +rl_make_bare_keymap () +{ + register int i; + Keymap keymap = (Keymap)xmalloc (KEYMAP_SIZE * sizeof (KEYMAP_ENTRY)); + + for (i = 0; i < KEYMAP_SIZE; i++) + { + keymap[i].type = ISFUNC; + keymap[i].function = (Function *)NULL; + } + + for (i = 'A'; i < ('Z' + 1); i++) + { + keymap[i].type = ISFUNC; + keymap[i].function = rl_do_lowercase_version; + } + + return (keymap); +} + +/* Return a new keymap which is a copy of MAP. */ +Keymap +rl_copy_keymap (map) + Keymap map; +{ + register int i; + Keymap temp = rl_make_bare_keymap (); + + for (i = 0; i < KEYMAP_SIZE; i++) + { + temp[i].type = map[i].type; + temp[i].function = map[i].function; + } + return (temp); +} + +/* Return a new keymap with the printing characters bound to rl_insert, + the uppercase Meta characters bound to run their lowercase equivalents, + and the Meta digits bound to produce numeric arguments. */ +Keymap +rl_make_keymap () +{ + register int i; + Keymap newmap; + + newmap = rl_make_bare_keymap (); + + /* All ASCII printing characters are self-inserting. */ + for (i = ' '; i < 127; i++) + newmap[i].function = rl_insert; + + newmap[TAB].function = rl_insert; + newmap[RUBOUT].function = rl_rubout; /* RUBOUT == 127 */ + newmap[CTRL('H')].function = rl_rubout; + +#if KEYMAP_SIZE > 128 + /* Printing characters in some 8-bit character sets. */ + for (i = 128; i < 160; i++) + newmap[i].function = rl_insert; + + /* ISO Latin-1 printing characters should self-insert. */ + for (i = 160; i < 256; i++) + newmap[i].function = rl_insert; +#endif /* KEYMAP_SIZE > 128 */ + + return (newmap); +} + +/* Free the storage associated with MAP. */ +void +rl_discard_keymap (map) + Keymap (map); +{ + int i; + + if (!map) + return; + + for (i = 0; i < KEYMAP_SIZE; i++) + { + switch (map[i].type) + { + case ISFUNC: + break; + + case ISKMAP: + rl_discard_keymap ((Keymap)map[i].function); + break; + + case ISMACR: + free ((char *)map[i].function); + break; + } + } +} diff --git a/readline/keymaps.h b/readline/keymaps.h new file mode 100644 index 00000000000..f6143f86f26 --- /dev/null +++ b/readline/keymaps.h @@ -0,0 +1,95 @@ +/* keymaps.h -- Manipulation of readline keymaps. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef _KEYMAPS_H_ +#define _KEYMAPS_H_ + +#if defined (READLINE_LIBRARY) +# include "chardefs.h" +#else +# include <readline/chardefs.h> +#endif + +#if !defined (_FUNCTION_DEF) +# define _FUNCTION_DEF +typedef int Function (); +typedef void VFunction (); +typedef char *CPFunction (); +typedef char **CPPFunction (); +#endif + +/* A keymap contains one entry for each key in the ASCII set. + Each entry consists of a type and a pointer. + FUNCTION is the address of a function to run, or the + address of a keymap to indirect through. + TYPE says which kind of thing FUNCTION is. */ +typedef struct _keymap_entry { + char type; + Function *function; +} KEYMAP_ENTRY; + +/* This must be large enough to hold bindings for all of the characters + in a desired character set (e.g, 128 for ASCII, 256 for ISO Latin-x, + and so on). */ +#define KEYMAP_SIZE 256 + +/* I wanted to make the above structure contain a union of: + union { Function *function; struct _keymap_entry *keymap; } value; + but this made it impossible for me to create a static array. + Maybe I need C lessons. */ + +typedef KEYMAP_ENTRY KEYMAP_ENTRY_ARRAY[KEYMAP_SIZE]; +typedef KEYMAP_ENTRY *Keymap; + +/* The values that TYPE can have in a keymap entry. */ +#define ISFUNC 0 +#define ISKMAP 1 +#define ISMACR 2 + +extern KEYMAP_ENTRY_ARRAY emacs_standard_keymap, emacs_meta_keymap, emacs_ctlx_keymap; +extern KEYMAP_ENTRY_ARRAY vi_insertion_keymap, vi_movement_keymap; + +/* Return a new, empty keymap. + Free it with free() when you are done. */ +extern Keymap rl_make_bare_keymap (); + +/* Return a new keymap which is a copy of MAP. */ +extern Keymap rl_copy_keymap (); + +/* Return a new keymap with the printing characters bound to rl_insert, + the lowercase Meta characters bound to run their equivalents, and + the Meta digits bound to produce numeric arguments. */ +extern Keymap rl_make_keymap (); + +extern void rl_discard_keymap (); + +/* Return the keymap corresponding to a given name. Names look like + `emacs' or `emacs-meta' or `vi-insert'. */ +extern Keymap rl_get_keymap_by_name (); + +/* Return the current keymap. */ +extern Keymap rl_get_keymap (); + +/* Set the current keymap to MAP. */ +extern void rl_set_keymap (); + +#endif /* _KEYMAPS_H_ */ diff --git a/readline/kill.c b/readline/kill.c new file mode 100644 index 00000000000..a150e3c28d2 --- /dev/null +++ b/readline/kill.c @@ -0,0 +1,634 @@ +/* kill.c -- kill ring management. */ + +/* Copyright (C) 1994 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +extern int _rl_last_command_was_kill; +extern int rl_editing_mode; +extern int rl_explicit_arg; +extern Function *rl_last_func; + +extern void _rl_init_argument (); +extern int _rl_set_mark_at_pos (); +extern void _rl_fix_point (); +extern void _rl_abort_internal (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Killing Mechanism */ +/* */ +/* **************************************************************** */ + +/* What we assume for a max number of kills. */ +#define DEFAULT_MAX_KILLS 10 + +/* The real variable to look at to find out when to flush kills. */ +static int rl_max_kills = DEFAULT_MAX_KILLS; + +/* Where to store killed text. */ +static char **rl_kill_ring = (char **)NULL; + +/* Where we are in the kill ring. */ +static int rl_kill_index; + +/* How many slots we have in the kill ring. */ +static int rl_kill_ring_length; + +/* How to say that you only want to save a certain amount + of kill material. */ +int +rl_set_retained_kills (num) + int num; +{ + return 0; +} + +/* Add TEXT to the kill ring, allocating a new kill ring slot as necessary. + This uses TEXT directly, so the caller must not free it. If APPEND is + non-zero, and the last command was a kill, the text is appended to the + current kill ring slot, otherwise prepended. */ +static int +_rl_copy_to_kill_ring (text, append) + char *text; + int append; +{ + char *old, *new; + int slot; + + /* First, find the slot to work with. */ + if (_rl_last_command_was_kill == 0) + { + /* Get a new slot. */ + if (rl_kill_ring == 0) + { + /* If we don't have any defined, then make one. */ + rl_kill_ring = (char **) + xmalloc (((rl_kill_ring_length = 1) + 1) * sizeof (char *)); + rl_kill_ring[slot = 0] = (char *)NULL; + } + else + { + /* We have to add a new slot on the end, unless we have + exceeded the max limit for remembering kills. */ + slot = rl_kill_ring_length; + if (slot == rl_max_kills) + { + register int i; + free (rl_kill_ring[0]); + for (i = 0; i < slot; i++) + rl_kill_ring[i] = rl_kill_ring[i + 1]; + } + else + { + slot = rl_kill_ring_length += 1; + rl_kill_ring = (char **)xrealloc (rl_kill_ring, slot * sizeof (char *)); + } + rl_kill_ring[--slot] = (char *)NULL; + } + } + else + slot = rl_kill_ring_length - 1; + + /* If the last command was a kill, prepend or append. */ + if (_rl_last_command_was_kill && rl_editing_mode != vi_mode) + { + old = rl_kill_ring[slot]; + new = xmalloc (1 + strlen (old) + strlen (text)); + + if (append) + { + strcpy (new, old); + strcat (new, text); + } + else + { + strcpy (new, text); + strcat (new, old); + } + free (old); + free (text); + rl_kill_ring[slot] = new; + } + else + rl_kill_ring[slot] = text; + + rl_kill_index = slot; + return 0; +} + +/* The way to kill something. This appends or prepends to the last + kill, if the last command was a kill command. if FROM is less + than TO, then the text is appended, otherwise prepended. If the + last command was not a kill command, then a new slot is made for + this kill. */ +int +rl_kill_text (from, to) + int from, to; +{ + char *text; + + /* Is there anything to kill? */ + if (from == to) + { + _rl_last_command_was_kill++; + return 0; + } + + text = rl_copy_text (from, to); + + /* Delete the copied text from the line. */ + rl_delete_text (from, to); + + _rl_copy_to_kill_ring (text, from < to); + + _rl_last_command_was_kill++; + return 0; +} + +/* Now REMEMBER! In order to do prepending or appending correctly, kill + commands always make rl_point's original position be the FROM argument, + and rl_point's extent be the TO argument. */ + +/* **************************************************************** */ +/* */ +/* Killing Commands */ +/* */ +/* **************************************************************** */ + +/* Delete the word at point, saving the text in the kill ring. */ +int +rl_kill_word (count, key) + int count, key; +{ + int orig_point = rl_point; + + if (count < 0) + return (rl_backward_kill_word (-count, key)); + else + { + rl_forward_word (count, key); + + if (rl_point != orig_point) + rl_kill_text (orig_point, rl_point); + + rl_point = orig_point; + } + return 0; +} + +/* Rubout the word before point, placing it on the kill ring. */ +int +rl_backward_kill_word (count, ignore) + int count, ignore; +{ + int orig_point = rl_point; + + if (count < 0) + return (rl_kill_word (-count, ignore)); + else + { + rl_backward_word (count, ignore); + + if (rl_point != orig_point) + rl_kill_text (orig_point, rl_point); + } + return 0; +} + +/* Kill from here to the end of the line. If DIRECTION is negative, kill + back to the line start instead. */ +int +rl_kill_line (direction, ignore) + int direction, ignore; +{ + int orig_point = rl_point; + + if (direction < 0) + return (rl_backward_kill_line (1, ignore)); + else + { + rl_end_of_line (1, ignore); + if (orig_point != rl_point) + rl_kill_text (orig_point, rl_point); + rl_point = orig_point; + } + return 0; +} + +/* Kill backwards to the start of the line. If DIRECTION is negative, kill + forwards to the line end instead. */ +int +rl_backward_kill_line (direction, ignore) + int direction, ignore; +{ + int orig_point = rl_point; + + if (direction < 0) + return (rl_kill_line (1, ignore)); + else + { + if (!rl_point) + ding (); + else + { + rl_beg_of_line (1, ignore); + rl_kill_text (orig_point, rl_point); + } + } + return 0; +} + +/* Kill the whole line, no matter where point is. */ +int +rl_kill_full_line (count, ignore) + int count, ignore; +{ + rl_begin_undo_group (); + rl_point = 0; + rl_kill_text (rl_point, rl_end); + rl_end_undo_group (); + return 0; +} + +/* The next two functions mimic unix line editing behaviour, except they + save the deleted text on the kill ring. This is safer than not saving + it, and since we have a ring, nobody should get screwed. */ + +/* This does what C-w does in Unix. We can't prevent people from + using behaviour that they expect. */ +int +rl_unix_word_rubout (count, key) + int count, key; +{ + int orig_point; + + if (rl_point == 0) + ding (); + else + { + orig_point = rl_point; + if (count <= 0) + count = 1; + + while (count--) + { + while (rl_point && whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + while (rl_point && (whitespace (rl_line_buffer[rl_point - 1]) == 0)) + rl_point--; + } + + rl_kill_text (orig_point, rl_point); + } + return 0; +} + +/* Here is C-u doing what Unix does. You don't *have* to use these + key-bindings. We have a choice of killing the entire line, or + killing from where we are to the start of the line. We choose the + latter, because if you are a Unix weenie, then you haven't backspaced + into the line at all, and if you aren't, then you know what you are + doing. */ +int +rl_unix_line_discard (count, key) + int count, key; +{ + if (rl_point == 0) + ding (); + else + { + rl_kill_text (rl_point, 0); + rl_point = 0; + } + return 0; +} + +/* Copy the text in the `region' to the kill ring. If DELETE is non-zero, + delete the text from the line as well. */ +static int +region_kill_internal (delete) + int delete; +{ + char *text; + + if (rl_mark == rl_point) + { + _rl_last_command_was_kill++; + return 0; + } + + text = rl_copy_text (rl_point, rl_mark); + if (delete) + rl_delete_text (rl_point, rl_mark); + _rl_copy_to_kill_ring (text, rl_point < rl_mark); + + _rl_last_command_was_kill++; + return 0; +} + +/* Copy the text in the region to the kill ring. */ +int +rl_copy_region_to_kill (count, ignore) + int count, ignore; +{ + return (region_kill_internal (0)); +} + +/* Kill the text between the point and mark. */ +int +rl_kill_region (count, ignore) + int count, ignore; +{ + int r; + + r = region_kill_internal (1); + _rl_fix_point (1); + return r; +} + +/* Copy COUNT words to the kill ring. DIR says which direction we look + to find the words. */ +static int +_rl_copy_word_as_kill (count, dir) + int count, dir; +{ + int om, op, r; + + om = rl_mark; + op = rl_point; + + if (dir > 0) + rl_forward_word (count, 0); + else + rl_backward_word (count, 0); + + rl_mark = rl_point; + + if (dir > 0) + rl_backward_word (count, 0); + else + rl_forward_word (count, 0); + + r = region_kill_internal (0); + + rl_mark = om; + rl_point = op; + + return r; +} + +int +rl_copy_forward_word (count, key) + int count, key; +{ + if (count < 0) + return (rl_copy_backward_word (-count, key)); + + return (_rl_copy_word_as_kill (count, 1)); +} + +int +rl_copy_backward_word (count, key) + int count, key; +{ + if (count < 0) + return (rl_copy_forward_word (-count, key)); + + return (_rl_copy_word_as_kill (count, -1)); +} + +/* Yank back the last killed text. This ignores arguments. */ +int +rl_yank (count, ignore) + int count, ignore; +{ + if (rl_kill_ring == 0) + { + _rl_abort_internal (); + return -1; + } + + _rl_set_mark_at_pos (rl_point); + rl_insert_text (rl_kill_ring[rl_kill_index]); + return 0; +} + +/* If the last command was yank, or yank_pop, and the text just + before point is identical to the current kill item, then + delete that text from the line, rotate the index down, and + yank back some other text. */ +int +rl_yank_pop (count, key) + int count, key; +{ + int l, n; + + if (((rl_last_func != rl_yank_pop) && (rl_last_func != rl_yank)) || + !rl_kill_ring) + { + _rl_abort_internal (); + return -1; + } + + l = strlen (rl_kill_ring[rl_kill_index]); + n = rl_point - l; + if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l)) + { + rl_delete_text (n, rl_point); + rl_point = n; + rl_kill_index--; + if (rl_kill_index < 0) + rl_kill_index = rl_kill_ring_length - 1; + rl_yank (1, 0); + return 0; + } + else + { + _rl_abort_internal (); + return -1; + } +} + +/* Yank the COUNTh argument from the previous history line, skipping + HISTORY_SKIP lines before looking for the `previous line'. */ +static int +rl_yank_nth_arg_internal (count, ignore, history_skip) + int count, ignore, history_skip; +{ + register HIST_ENTRY *entry; + char *arg; + int i; + + if (history_skip) + { + for (i = 0; i < history_skip; i++) + entry = previous_history (); + } + + entry = previous_history (); + if (entry) + { + if (history_skip) + { + for (i = 0; i < history_skip; i++) + next_history (); + } + next_history (); + } + else + { + ding (); + return -1; + } + + arg = history_arg_extract (count, count, entry->line); + if (!arg || !*arg) + { + ding (); + return -1; + } + + rl_begin_undo_group (); + +#if defined (VI_MODE) + /* Vi mode always inserts a space before yanking the argument, and it + inserts it right *after* rl_point. */ + if (rl_editing_mode == vi_mode) + { + rl_vi_append_mode (1, ignore); + rl_insert_text (" "); + } +#endif /* VI_MODE */ + + rl_insert_text (arg); + free (arg); + + rl_end_undo_group (); + return 0; +} + +/* Yank the COUNTth argument from the previous history line. */ +int +rl_yank_nth_arg (count, ignore) + int count, ignore; +{ + return (rl_yank_nth_arg_internal (count, ignore, 0)); +} + +/* Yank the last argument from the previous history line. This `knows' + how rl_yank_nth_arg treats a count of `$'. With an argument, this + behaves the same as rl_yank_nth_arg. */ +int +rl_yank_last_arg (count, key) + int count, key; +{ + static int history_skip = 0; + static int explicit_arg_p = 0; + static int count_passed = 1; + static int direction = 1; + + if (rl_last_func != rl_yank_last_arg) + { + history_skip = 0; + explicit_arg_p = rl_explicit_arg; + count_passed = count; + direction = 1; + } + else + { + rl_do_undo (); + if (count < 1) + direction = -direction; + history_skip += direction; + if (history_skip < 0) + history_skip = 0; + count_passed = count; + } + + if (explicit_arg_p) + return (rl_yank_nth_arg_internal (count, key, history_skip)); + else + return (rl_yank_nth_arg_internal ('$', key, history_skip)); +} + +/* A special paste command for users of Cygnus's cygwin32. */ +#if defined (__CYGWIN32__) +#include <windows.h> + +int +rl_paste_from_clipboard (count, key) + int count, key; +{ + char *data, *ptr; + int len; + + if (OpenClipboard (NULL) == 0) + return (0); + + data = (char *)GetClipboardData (CF_TEXT); + if (data) + { + ptr = strchr (data, '\r'); + if (ptr) + { + len = ptr - data; + ptr = xmalloc (len + 1); + ptr[len] = '\0'; + strncpy (ptr, data, len); + } + else + ptr = data; + rl_insert_text (ptr); + if (ptr != data) + free (ptr); + CloseClipboard (); + } + return (0); +} +#endif /* __CYGWIN32__ */ diff --git a/readline/macro.c b/readline/macro.c new file mode 100644 index 00000000000..f3c442b41c3 --- /dev/null +++ b/readline/macro.c @@ -0,0 +1,277 @@ +/* macro.c -- keyboard macros for readline. */ + +/* Copyright (C) 1994 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) + +/* Forward definitions. */ +void _rl_push_executing_macro (), _rl_pop_executing_macro (); +void _rl_add_macro_char (); + +/* Extern declarations. */ +extern int rl_explicit_arg; +extern int rl_key_sequence_length; + +extern void _rl_abort_internal (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Hacking Keyboard Macros */ +/* */ +/* **************************************************************** */ + +/* Non-zero means to save keys that we dispatch on in a kbd macro. */ +int _rl_defining_kbd_macro = 0; + +/* The currently executing macro string. If this is non-zero, + then it is a malloc ()'ed string where input is coming from. */ +char *_rl_executing_macro = (char *)NULL; + +/* The offset in the above string to the next character to be read. */ +static int executing_macro_index; + +/* The current macro string being built. Characters get stuffed + in here by add_macro_char (). */ +static char *current_macro = (char *)NULL; + +/* The size of the buffer allocated to current_macro. */ +static int current_macro_size; + +/* The index at which characters are being added to current_macro. */ +static int current_macro_index; + +/* A structure used to save nested macro strings. + It is a linked list of string/index for each saved macro. */ +struct saved_macro { + struct saved_macro *next; + char *string; + int sindex; +}; + +/* The list of saved macros. */ +static struct saved_macro *macro_list = (struct saved_macro *)NULL; + +/* Set up to read subsequent input from STRING. + STRING is free ()'ed when we are done with it. */ +void +_rl_with_macro_input (string) + char *string; +{ + _rl_push_executing_macro (); + _rl_executing_macro = string; + executing_macro_index = 0; +} + +/* Return the next character available from a macro, or 0 if + there are no macro characters. */ +int +_rl_next_macro_key () +{ + if (_rl_executing_macro == 0) + return (0); + + if (_rl_executing_macro[executing_macro_index] == 0) + { + _rl_pop_executing_macro (); + return (_rl_next_macro_key ()); + } + + return (_rl_executing_macro[executing_macro_index++]); +} + +/* Save the currently executing macro on a stack of saved macros. */ +void +_rl_push_executing_macro () +{ + struct saved_macro *saver; + + saver = (struct saved_macro *)xmalloc (sizeof (struct saved_macro)); + saver->next = macro_list; + saver->sindex = executing_macro_index; + saver->string = _rl_executing_macro; + + macro_list = saver; +} + +/* Discard the current macro, replacing it with the one + on the top of the stack of saved macros. */ +void +_rl_pop_executing_macro () +{ + struct saved_macro *macro; + + if (_rl_executing_macro) + free (_rl_executing_macro); + + _rl_executing_macro = (char *)NULL; + executing_macro_index = 0; + + if (macro_list) + { + macro = macro_list; + _rl_executing_macro = macro_list->string; + executing_macro_index = macro_list->sindex; + macro_list = macro_list->next; + free (macro); + } +} + +/* Add a character to the macro being built. */ +void +_rl_add_macro_char (c) + int c; +{ + if (current_macro_index + 1 >= current_macro_size) + { + if (current_macro == 0) + current_macro = xmalloc (current_macro_size = 25); + else + current_macro = xrealloc (current_macro, current_macro_size += 25); + } + + current_macro[current_macro_index++] = c; + current_macro[current_macro_index] = '\0'; +} + +void +_rl_kill_kbd_macro () +{ + if (current_macro) + { + free (current_macro); + current_macro = (char *) NULL; + } + current_macro_size = current_macro_index = 0; + + if (_rl_executing_macro) + { + free (_rl_executing_macro); + _rl_executing_macro = (char *) NULL; + } + executing_macro_index = 0; + + _rl_defining_kbd_macro = 0; +} + +/* Begin defining a keyboard macro. + Keystrokes are recorded as they are executed. + End the definition with rl_end_kbd_macro (). + If a numeric argument was explicitly typed, then append this + definition to the end of the existing macro, and start by + re-executing the existing macro. */ +int +rl_start_kbd_macro (ignore1, ignore2) + int ignore1, ignore2; +{ + if (_rl_defining_kbd_macro) + { + _rl_abort_internal (); + return -1; + } + + if (rl_explicit_arg) + { + if (current_macro) + _rl_with_macro_input (savestring (current_macro)); + } + else + current_macro_index = 0; + + _rl_defining_kbd_macro = 1; + return 0; +} + +/* Stop defining a keyboard macro. + A numeric argument says to execute the macro right now, + that many times, counting the definition as the first time. */ +int +rl_end_kbd_macro (count, ignore) + int count, ignore; +{ + if (_rl_defining_kbd_macro == 0) + { + _rl_abort_internal (); + return -1; + } + + current_macro_index -= rl_key_sequence_length - 1; + current_macro[current_macro_index] = '\0'; + + _rl_defining_kbd_macro = 0; + + return (rl_call_last_kbd_macro (--count, 0)); +} + +/* Execute the most recently defined keyboard macro. + COUNT says how many times to execute it. */ +int +rl_call_last_kbd_macro (count, ignore) + int count, ignore; +{ + if (current_macro == 0) + _rl_abort_internal (); + + if (_rl_defining_kbd_macro) + { + ding (); /* no recursive macros */ + current_macro[--current_macro_index] = '\0'; /* erase this char */ + return 0; + } + + while (count--) + _rl_with_macro_input (savestring (current_macro)); + return 0; +} + +void +rl_push_macro_input (macro) + char *macro; +{ + _rl_with_macro_input (macro); +} diff --git a/readline/nls.c b/readline/nls.c new file mode 100644 index 00000000000..f2d413d59d5 --- /dev/null +++ b/readline/nls.c @@ -0,0 +1,228 @@ +/* nls.c -- skeletal internationalization code. */ + +/* Copyright (C) 1996 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include <locale.h> +#endif + +#include <ctype.h> + +#include "rldefs.h" + +extern int _rl_convert_meta_chars_to_ascii; +extern int _rl_output_meta_chars; +extern int _rl_meta_flag; + +/* Functions imported from shell.c */ +extern char *get_env_value (); + +#if !defined (HAVE_SETLOCALE) +/* A list of legal values for the LANG or LC_CTYPE environment variables. + If a locale name in this list is the value for the LC_ALL, LC_CTYPE, + or LANG environment variable (using the first of those with a value), + readline eight-bit mode is enabled. */ +static char *legal_lang_values[] = +{ + "iso88591", + "iso88592", + "iso88593", + "iso88594", + "iso88595", + "iso88596", + "iso88597", + "iso88598", + "iso88599", + "iso885910", + "koi8r", + "koi8-r", + 0 +}; + +static char *normalize_codeset (); +static char *find_codeset (); +#endif /* !HAVE_SETLOCALE */ + +/* Check for LC_ALL, LC_CTYPE, and LANG and use the first with a value + to decide the defaults for 8-bit character input and output. Returns + 1 if we set eight-bit mode. */ +int +_rl_init_eightbit () +{ +/* If we have setlocale(3), just check the current LC_CTYPE category + value, and go into eight-bit mode if it's not C or POSIX. */ +#if defined (HAVE_SETLOCALE) + char *t; + + /* Set the LC_CTYPE locale category from environment variables. */ + t = setlocale (LC_CTYPE, ""); + if (t && *t && (t[0] != 'C' || t[1]) && (STREQ (t, "POSIX") == 0)) + { + _rl_meta_flag = 1; + _rl_convert_meta_chars_to_ascii = 0; + _rl_output_meta_chars = 1; + return (1); + } + else + return (0); + +#else /* !HAVE_SETLOCALE */ + char *lspec, *t; + int i; + + /* We don't have setlocale. Finesse it. Check the environment for the + appropriate variables and set eight-bit mode if they have the right + values. */ + lspec = get_env_value ("LC_ALL"); + if (lspec == 0) lspec = get_env_value ("LC_CTYPE"); + if (lspec == 0) lspec = get_env_value ("LANG"); + if (lspec == 0 || (t = normalize_codeset (lspec)) == 0) + return (0); + for (i = 0; t && legal_lang_values[i]; i++) + if (STREQ (t, legal_lang_values[i])) + { + _rl_meta_flag = 1; + _rl_convert_meta_chars_to_ascii = 0; + _rl_output_meta_chars = 1; + break; + } + free (t); + return (legal_lang_values[i] ? 1 : 0); + +#endif /* !HAVE_SETLOCALE */ +} + +#if !defined (HAVE_SETLOCALE) +static char * +normalize_codeset (codeset) + char *codeset; +{ + size_t namelen, i; + int len, all_digits; + char *wp, *retval; + + codeset = find_codeset (codeset, &namelen); + + if (codeset == 0) + return (codeset); + + all_digits = 1; + for (len = 0, i = 0; i < namelen; i++) + { + if (isalnum (codeset[i])) + { + len++; + all_digits &= isdigit (codeset[i]); + } + } + + retval = (char *)malloc ((all_digits ? 3 : 0) + len + 1); + if (retval == 0) + return ((char *)0); + + wp = retval; + /* Add `iso' to beginning of an all-digit codeset */ + if (all_digits) + { + *wp++ = 'i'; + *wp++ = 's'; + *wp++ = 'o'; + } + + for (i = 0; i < namelen; i++) + if (isalpha (codeset[i])) + *wp++ = (isupper (codeset[i])) ? tolower (codeset[i]) : codeset[i]; + else if (isdigit (codeset[i])) + *wp++ = codeset[i]; + *wp = '\0'; + + return retval; +} + +/* Isolate codeset portion of locale specification. */ +static char * +find_codeset (name, lenp) + char *name; + size_t *lenp; +{ + char *cp, *language, *result; + + cp = language = name; + result = (char *)0; + + while (*cp && *cp != '_' && *cp != '@' && *cp != '+' && *cp != ',') + cp++; + + /* This does not make sense: language has to be specified. As + an exception we allow the variable to contain only the codeset + name. Perhaps there are funny codeset names. */ + if (language == cp) + { + *lenp = strlen (language); + result = language; + } + else + { + /* Next is the territory. */ + if (*cp == '_') + do + ++cp; + while (*cp && *cp != '.' && *cp != '@' && *cp != '+' && *cp != ',' && *cp != '_'); + + /* Now, finally, is the codeset. */ + result = cp; + if (*cp == '.') + do + ++cp; + while (*cp && *cp != '@'); + + if (cp - result > 2) + { + result++; + *lenp = cp - result; + } + else + { + *lenp = strlen (language); + result = language; + } + } + + return result; +} +#endif /* !HAVE_SETLOCALE */ diff --git a/readline/parens.c b/readline/parens.c new file mode 100644 index 00000000000..a500c0afac7 --- /dev/null +++ b/readline/parens.c @@ -0,0 +1,156 @@ +/* parens.c -- Implementation of matching parentheses feature. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#include "rlconf.h" + +#if !defined (PAREN_MATCHING) +extern int rl_insert (); + +int +rl_insert_close (count, invoking_key) + int count, invoking_key; +{ + return (rl_insert (count, invoking_key)); +} + +#else /* PAREN_MATCHING */ + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> +#include <sys/types.h> + +#if defined (FD_SET) && !defined (HAVE_SELECT) +# define HAVE_SELECT +#endif + +#if defined (HAVE_SELECT) +# include <sys/time.h> +#endif /* HAVE_SELECT */ +#if defined (HAVE_SYS_SELECT_H) +# include <sys/select.h> +#endif + +#if defined (HAVE_STRING_H) +# include <string.h> +#else /* !HAVE_STRING_H */ +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +#include "readline.h" + +extern int rl_explicit_arg; + +/* Non-zero means try to blink the matching open parenthesis when the + close parenthesis is inserted. */ +#if defined (HAVE_SELECT) +int rl_blink_matching_paren = 1; +#else /* !HAVE_SELECT */ +int rl_blink_matching_paren = 0; +#endif /* !HAVE_SELECT */ + +static int find_matching_open (); + +int +rl_insert_close (count, invoking_key) + int count, invoking_key; +{ + if (rl_explicit_arg || !rl_blink_matching_paren) + rl_insert (count, invoking_key); + else + { +#if defined (HAVE_SELECT) + int orig_point, match_point, ready; + struct timeval timer; + fd_set readfds; + + rl_insert (1, invoking_key); + (*rl_redisplay_function) (); + match_point = + find_matching_open (rl_line_buffer, rl_point - 2, invoking_key); + + /* Emacs might message or ring the bell here, but I don't. */ + if (match_point < 0) + return -1; + + FD_ZERO (&readfds); + FD_SET (fileno (rl_instream), &readfds); + timer.tv_sec = 0; + timer.tv_usec = 500000; + + orig_point = rl_point; + rl_point = match_point; + (*rl_redisplay_function) (); + ready = select (1, &readfds, (fd_set *)NULL, (fd_set *)NULL, &timer); + rl_point = orig_point; +#else /* !HAVE_SELECT */ + rl_insert (count, invoking_key); +#endif /* !HAVE_SELECT */ + } + return 0; +} + +static int +find_matching_open (string, from, closer) + char *string; + int from, closer; +{ + register int i; + int opener, level, delimiter; + + switch (closer) + { + case ']': opener = '['; break; + case '}': opener = '{'; break; + case ')': opener = '('; break; + default: + return (-1); + } + + level = 1; /* The closer passed in counts as 1. */ + delimiter = 0; /* Delimited state unknown. */ + + for (i = from; i > -1; i--) + { + if (delimiter && (string[i] == delimiter)) + delimiter = 0; + else if (rl_basic_quote_characters && strchr (rl_basic_quote_characters, string[i])) + delimiter = string[i]; + else if (!delimiter && (string[i] == closer)) + level++; + else if (!delimiter && (string[i] == opener)) + level--; + + if (!level) + break; + } + return (i); +} + +#endif /* PAREN_MATCHING */ diff --git a/readline/posixdir.h b/readline/posixdir.h new file mode 100644 index 00000000000..7480a93d5db --- /dev/null +++ b/readline/posixdir.h @@ -0,0 +1,49 @@ +/* posixdir.h -- Posix directory reading includes and defines. */ + +/* Copyright (C) 1987,1991 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + Bash is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with Bash; see the file COPYING. If not, write to the Free + Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This file should be included instead of <dirent.h> or <sys/dir.h>. */ + +#if !defined (_POSIXDIR_H_) +#define _POSIXDIR_H_ + +#if defined (HAVE_DIRENT_H) +# include <dirent.h> +# define D_NAMLEN(d) (strlen ((d)->d_name)) +#else +# if defined (HAVE_SYS_NDIR_H) +# include <sys/ndir.h> +# endif +# if defined (HAVE_SYS_DIR_H) +# include <sys/dir.h> +# endif +# if defined (HAVE_NDIR_H) +# include <ndir.h> +# endif +# if !defined (dirent) +# define dirent direct +# endif /* !dirent */ +# define D_NAMLEN(d) ((d)->d_namlen) +#endif /* !HAVE_DIRENT_H */ + +#if defined (STRUCT_DIRENT_HAS_D_INO) && !defined (STRUCT_DIRENT_HAS_D_FILENO) +# define d_fileno d_ino +#endif + +#endif /* !_POSIXDIR_H_ */ diff --git a/readline/posixjmp.h b/readline/posixjmp.h new file mode 100644 index 00000000000..8703d17e9fb --- /dev/null +++ b/readline/posixjmp.h @@ -0,0 +1,20 @@ +/* posixjmp.h -- wrapper for setjmp.h with changes for POSIX systems. */ + +#ifndef _POSIXJMP_H_ +#define _POSIXJMP_H_ + +#include <setjmp.h> + +/* This *must* be included *after* config.h */ + +#if defined (HAVE_POSIX_SIGSETJMP) +# define procenv_t sigjmp_buf +# undef setjmp +# define setjmp(x) sigsetjmp((x), 1) +# undef longjmp +# define longjmp(x, n) siglongjmp((x), (n)) +#else +# define procenv_t jmp_buf +#endif + +#endif /* _POSIXJMP_H_ */ diff --git a/readline/posixstat.h b/readline/posixstat.h new file mode 100644 index 00000000000..bfce8c04fef --- /dev/null +++ b/readline/posixstat.h @@ -0,0 +1,142 @@ +/* posixstat.h -- Posix stat(2) definitions for systems that + don't have them. */ + +/* Copyright (C) 1987,1991 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + Bash is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with Bash; see the file COPYING. If not, write to the Free + Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This file should be included instead of <sys/stat.h>. + It relies on the local sys/stat.h to work though. */ +#if !defined (_POSIXSTAT_H_) +#define _POSIXSTAT_H_ + +#include <sys/stat.h> + +#if defined (STAT_MACROS_BROKEN) +# undef S_ISBLK +# undef S_ISCHR +# undef S_ISDIR +# undef S_ISFIFO +# undef S_ISREG +# undef S_ISLNK +#endif /* STAT_MACROS_BROKEN */ + +/* These are guaranteed to work only on isc386 */ +#if !defined (S_IFDIR) && !defined (S_ISDIR) +# define S_IFDIR 0040000 +#endif /* !S_IFDIR && !S_ISDIR */ +#if !defined (S_IFMT) +# define S_IFMT 0170000 +#endif /* !S_IFMT */ + +/* Posix 1003.1 5.6.1.1 <sys/stat.h> file types */ + +/* Some Posix-wannabe systems define _S_IF* macros instead of S_IF*, but + do not provide the S_IS* macros that Posix requires. */ + +#if defined (_S_IFMT) && !defined (S_IFMT) +#define S_IFMT _S_IFMT +#endif +#if defined (_S_IFIFO) && !defined (S_IFIFO) +#define S_IFIFO _S_IFIFO +#endif +#if defined (_S_IFCHR) && !defined (S_IFCHR) +#define S_IFCHR _S_IFCHR +#endif +#if defined (_S_IFDIR) && !defined (S_IFDIR) +#define S_IFDIR _S_IFDIR +#endif +#if defined (_S_IFBLK) && !defined (S_IFBLK) +#define S_IFBLK _S_IFBLK +#endif +#if defined (_S_IFREG) && !defined (S_IFREG) +#define S_IFREG _S_IFREG +#endif +#if defined (_S_IFLNK) && !defined (S_IFLNK) +#define S_IFLNK _S_IFLNK +#endif +#if defined (_S_IFSOCK) && !defined (S_IFSOCK) +#define S_IFSOCK _S_IFSOCK +#endif + +/* Test for each symbol individually and define the ones necessary (some + systems claiming Posix compatibility define some but not all). */ + +#if defined (S_IFBLK) && !defined (S_ISBLK) +#define S_ISBLK(m) (((m)&S_IFMT) == S_IFBLK) /* block device */ +#endif + +#if defined (S_IFCHR) && !defined (S_ISCHR) +#define S_ISCHR(m) (((m)&S_IFMT) == S_IFCHR) /* character device */ +#endif + +#if defined (S_IFDIR) && !defined (S_ISDIR) +#define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) /* directory */ +#endif + +#if defined (S_IFREG) && !defined (S_ISREG) +#define S_ISREG(m) (((m)&S_IFMT) == S_IFREG) /* file */ +#endif + +#if defined (S_IFIFO) && !defined (S_ISFIFO) +#define S_ISFIFO(m) (((m)&S_IFMT) == S_IFIFO) /* fifo - named pipe */ +#endif + +#if defined (S_IFLNK) && !defined (S_ISLNK) +#define S_ISLNK(m) (((m)&S_IFMT) == S_IFLNK) /* symbolic link */ +#endif + +#if defined (S_IFSOCK) && !defined (S_ISSOCK) +#define S_ISSOCK(m) (((m)&S_IFMT) == S_IFSOCK) /* socket */ +#endif + +/* + * POSIX 1003.1 5.6.1.2 <sys/stat.h> File Modes + */ + +#if !defined (S_IRWXU) +# if !defined (S_IREAD) +# define S_IREAD 00400 +# define S_IWRITE 00200 +# define S_IEXEC 00100 +# endif /* S_IREAD */ + +# if !defined (S_IRUSR) +# define S_IRUSR S_IREAD /* read, owner */ +# define S_IWUSR S_IWRITE /* write, owner */ +# define S_IXUSR S_IEXEC /* execute, owner */ + +# define S_IRGRP (S_IREAD >> 3) /* read, group */ +# define S_IWGRP (S_IWRITE >> 3) /* write, group */ +# define S_IXGRP (S_IEXEC >> 3) /* execute, group */ + +# define S_IROTH (S_IREAD >> 6) /* read, other */ +# define S_IWOTH (S_IWRITE >> 6) /* write, other */ +# define S_IXOTH (S_IEXEC >> 6) /* execute, other */ +# endif /* !S_IRUSR */ + +# define S_IRWXU (S_IRUSR | S_IWUSR | S_IXUSR) +# define S_IRWXG (S_IRGRP | S_IWGRP | S_IXGRP) +# define S_IRWXO (S_IROTH | S_IWOTH | S_IXOTH) +#endif /* !S_IRWXU */ + +/* These are non-standard, but are used in builtins.c$symbolic_umask() */ +#define S_IRUGO (S_IRUSR | S_IRGRP | S_IROTH) +#define S_IWUGO (S_IWUSR | S_IWGRP | S_IWOTH) +#define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) + +#endif /* _POSIXSTAT_H_ */ diff --git a/readline/readline.c b/readline/readline.c new file mode 100644 index 00000000000..8ff6e98929f --- /dev/null +++ b/readline/readline.c @@ -0,0 +1,2103 @@ +/* readline.c -- a general facility for reading lines of input + with emacs style editing and completion. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include "posixstat.h" +#include <fcntl.h> +#if defined (HAVE_SYS_FILE_H) +# include <sys/file.h> +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include <locale.h> +#endif + +#include <signal.h> +#include <stdio.h> +#include "posixjmp.h" + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#if defined (__EMX__) +# define INCL_DOSPROCESS +# include <os2.h> +#endif /* __EMX__ */ + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#ifndef RL_LIBRARY_VERSION +# define RL_LIBRARY_VERSION "2.2-bash" +#endif + +/* Evaluates its arguments multiple times. */ +#define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) + +/* NOTE: Functions and variables prefixed with `_rl_' are + pseudo-global: they are global so they can be shared + between files in the readline library, but are not intended + to be visible to readline callers. */ + +/* Variables and functions imported from terminal.c */ +extern int _rl_init_terminal_io (); +extern void _rl_enable_meta_key (); +#ifdef _MINIX +extern void _rl_output_character_function (); +#else +extern int _rl_output_character_function (); +#endif +extern void _rl_get_screen_size (); + +extern int _rl_enable_meta; +extern int _rl_term_autowrap; +extern int screenwidth, screenheight, screenchars; + +/* Variables and functions imported from rltty.c. */ +extern void rl_prep_terminal (), rl_deprep_terminal (); +extern void rltty_set_default_bindings (); + +/* Functions imported from util.c. */ +extern void _rl_abort_internal (); +extern void rl_extend_line_buffer (); +extern int alphabetic (); + +/* Functions imported from bind.c. */ +extern void _rl_bind_if_unbound (); +extern int rl_set_keymap_from_edit_mode (); + +/* Functions imported from input.c. */ +extern int _rl_any_typein (); +extern void _rl_insert_typein (); +extern int rl_read_key (); + +/* Functions imported from nls.c */ +extern int _rl_init_eightbit (); + +/* Functions imported from shell.c */ +extern char *get_env_value (); + +/* External redisplay functions and variables from display.c */ +extern void _rl_move_vert (); +extern void _rl_update_final (); +extern void _rl_clear_to_eol (); +extern void _rl_clear_screen (); + +extern void _rl_save_prompt (); +extern void _rl_restore_prompt (); + +extern void _rl_erase_at_end_of_line (); +extern void _rl_move_cursor_relative (); + +extern int _rl_vis_botlin; +extern int _rl_last_c_pos; +extern int _rl_horizontal_scroll_mode; +extern int rl_display_fixed; +extern int _rl_suppress_redisplay; +extern char *rl_display_prompt; + +/* Variables imported from complete.c. */ +extern char *rl_completer_word_break_characters; +extern char *rl_basic_word_break_characters; +extern int rl_completion_query_items; +extern int rl_complete_with_tilde_expansion; + +/* Variables and functions from macro.c. */ +extern void _rl_add_macro_char (); +extern void _rl_with_macro_input (); +extern int _rl_next_macro_key (); +extern int _rl_defining_kbd_macro; + +#if defined (VI_MODE) +/* Functions imported from vi_mode.c. */ +extern void _rl_vi_set_last (); +extern void _rl_vi_reset_last (); +extern void _rl_vi_done_inserting (); +extern int _rl_vi_textmod_command (); +extern void _rl_vi_initialize_line (); +#endif /* VI_MODE */ + +extern UNDO_LIST *rl_undo_list; +extern int _rl_doing_an_undo; + +/* Forward declarations used in this file. */ +void _rl_free_history_entry (); + +int _rl_dispatch (); +int _rl_init_argument (); + +static char *readline_internal (); +static void readline_initialize_everything (); +static void start_using_history (); +static void bind_arrow_keys (); + +#if !defined (__GO32__) +static void readline_default_bindings (); +#endif /* !__GO32__ */ + +#if defined (__GO32__) +# include <go32.h> +# include <pc.h> +# undef HANDLE_SIGNALS +#endif /* __GO32__ */ + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Line editing input utility */ +/* */ +/* **************************************************************** */ + +char *rl_library_version = RL_LIBRARY_VERSION; + +/* A pointer to the keymap that is currently in use. + By default, it is the standard emacs keymap. */ +Keymap _rl_keymap = emacs_standard_keymap; + +/* The current style of editing. */ +int rl_editing_mode = emacs_mode; + +/* Non-zero if we called this function from _rl_dispatch(). It's present + so functions can find out whether they were called from a key binding + or directly from an application. */ +int rl_dispatching; + +/* Non-zero if the previous command was a kill command. */ +int _rl_last_command_was_kill = 0; + +/* The current value of the numeric argument specified by the user. */ +int rl_numeric_arg = 1; + +/* Non-zero if an argument was typed. */ +int rl_explicit_arg = 0; + +/* Temporary value used while generating the argument. */ +int rl_arg_sign = 1; + +/* Non-zero means we have been called at least once before. */ +static int rl_initialized; + +/* If non-zero, this program is running in an EMACS buffer. */ +static int running_in_emacs; + +/* The current offset in the current input line. */ +int rl_point; + +/* Mark in the current input line. */ +int rl_mark; + +/* Length of the current input line. */ +int rl_end; + +/* Make this non-zero to return the current input_line. */ +int rl_done; + +/* The last function executed by readline. */ +Function *rl_last_func = (Function *)NULL; + +/* Top level environment for readline_internal (). */ +procenv_t readline_top_level; + +/* The streams we interact with. */ +FILE *_rl_in_stream, *_rl_out_stream; + +/* The names of the streams that we do input and output to. */ +FILE *rl_instream = (FILE *)NULL; +FILE *rl_outstream = (FILE *)NULL; + +/* Non-zero means echo characters as they are read. */ +int readline_echoing_p = 1; + +/* Current prompt. */ +char *rl_prompt; +int rl_visible_prompt_length = 0; + +/* The number of characters read in order to type this complete command. */ +int rl_key_sequence_length = 0; + +/* If non-zero, then this is the address of a function to call just + before readline_internal () prints the first prompt. */ +Function *rl_startup_hook = (Function *)NULL; + +/* What we use internally. You should always refer to RL_LINE_BUFFER. */ +static char *the_line; + +/* The character that can generate an EOF. Really read from + the terminal driver... just defaulted here. */ +int _rl_eof_char = CTRL ('D'); + +/* Non-zero makes this the next keystroke to read. */ +int rl_pending_input = 0; + +/* Pointer to a useful terminal name. */ +char *rl_terminal_name = (char *)NULL; + +/* Non-zero means to always use horizontal scrolling in line display. */ +int _rl_horizontal_scroll_mode = 0; + +/* Non-zero means to display an asterisk at the starts of history lines + which have been modified. */ +int _rl_mark_modified_lines = 0; + +/* The style of `bell' notification preferred. This can be set to NO_BELL, + AUDIBLE_BELL, or VISIBLE_BELL. */ +int _rl_bell_preference = AUDIBLE_BELL; + +/* String inserted into the line by rl_insert_comment (). */ +char *_rl_comment_begin; + +/* Keymap holding the function currently being executed. */ +Keymap rl_executing_keymap; + +/* Line buffer and maintenence. */ +char *rl_line_buffer = (char *)NULL; +int rl_line_buffer_len = 0; + +/* Forward declarations used by the display and termcap code. */ + +/* **************************************************************** */ +/* */ +/* `Forward' declarations */ +/* */ +/* **************************************************************** */ + +/* Non-zero means do not parse any lines other than comments and + parser directives. */ +unsigned char _rl_parsing_conditionalized_out = 0; + +/* Non-zero means to convert characters with the meta bit set to + escape-prefixed characters so we can indirect through + emacs_meta_keymap or vi_escape_keymap. */ +int _rl_convert_meta_chars_to_ascii = 1; + +/* Non-zero means to output characters with the meta bit set directly + rather than as a meta-prefixed escape sequence. */ +int _rl_output_meta_chars = 0; + +/* **************************************************************** */ +/* */ +/* Top Level Functions */ +/* */ +/* **************************************************************** */ + +/* Non-zero means treat 0200 bit in terminal input as Meta bit. */ +int _rl_meta_flag = 0; /* Forward declaration */ + +/* Read a line of input. Prompt with PROMPT. An empty PROMPT means + none. A return value of NULL means that EOF was encountered. */ +char * +readline (prompt) + char *prompt; +{ + char *value; + + rl_prompt = prompt; + + /* If we are at EOF return a NULL string. */ + if (rl_pending_input == EOF) + { + rl_pending_input = 0; + return ((char *)NULL); + } + + rl_visible_prompt_length = rl_expand_prompt (rl_prompt); + + rl_initialize (); + (*rl_prep_term_function) (_rl_meta_flag); + +#if defined (HANDLE_SIGNALS) + rl_set_signals (); +#endif + + value = readline_internal (); + (*rl_deprep_term_function) (); + +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + + return (value); +} + +#if defined (READLINE_CALLBACKS) +# define STATIC_CALLBACK +#else +# define STATIC_CALLBACK static +#endif + +STATIC_CALLBACK void +readline_internal_setup () +{ + _rl_in_stream = rl_instream; + _rl_out_stream = rl_outstream; + + if (rl_startup_hook) + (*rl_startup_hook) (); + + if (readline_echoing_p == 0) + { + if (rl_prompt) + { + fprintf (_rl_out_stream, "%s", rl_prompt); + fflush (_rl_out_stream); + } + } + else + { + rl_on_new_line (); + (*rl_redisplay_function) (); +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + rl_vi_insertion_mode (1, 0); +#endif /* VI_MODE */ + } +} + +STATIC_CALLBACK char * +readline_internal_teardown (eof) + int eof; +{ + char *temp; + HIST_ENTRY *entry; + + /* Restore the original of this history line, iff the line that we + are editing was originally in the history, AND the line has changed. */ + entry = current_history (); + + if (entry && rl_undo_list) + { + temp = savestring (the_line); + rl_revert_line (1, 0); + entry = replace_history_entry (where_history (), the_line, (HIST_ENTRY *)NULL); + _rl_free_history_entry (entry); + + strcpy (the_line, temp); + free (temp); + } + + /* At any rate, it is highly likely that this line has an undo list. Get + rid of it now. */ + if (rl_undo_list) + free_undo_list (); + + return (eof ? (char *)NULL : savestring (the_line)); +} + +STATIC_CALLBACK int +#if defined (READLINE_CALLBACKS) +readline_internal_char () +#else +readline_internal_charloop () +#endif +{ + static int lastc, eof_found; + int c, code, lk; + + lastc = -1; + eof_found = 0; + +#if !defined (READLINE_CALLBACKS) + while (rl_done == 0) + { +#endif + lk = _rl_last_command_was_kill; + + code = setjmp (readline_top_level); + + if (code) + (*rl_redisplay_function) (); + + if (rl_pending_input == 0) + { + /* Then initialize the argument and number of keys read. */ + _rl_init_argument (); + rl_key_sequence_length = 0; + } + + c = rl_read_key (); + + /* EOF typed to a non-blank line is a <NL>. */ + if (c == EOF && rl_end) + c = NEWLINE; + + /* The character _rl_eof_char typed to blank line, and not as the + previous character is interpreted as EOF. */ + if (((c == _rl_eof_char && lastc != c) || c == EOF) && !rl_end) + { +#if defined (READLINE_CALLBACKS) + return (rl_done = 1); +#else + eof_found = 1; + break; +#endif + } + + lastc = c; + _rl_dispatch (c, _rl_keymap); + + /* If there was no change in _rl_last_command_was_kill, then no kill + has taken place. Note that if input is pending we are reading + a prefix command, so nothing has changed yet. */ + if (rl_pending_input == 0 && lk == _rl_last_command_was_kill) + _rl_last_command_was_kill = 0; + +#if defined (VI_MODE) + /* In vi mode, when you exit insert mode, the cursor moves back + over the previous character. We explicitly check for that here. */ + if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap) + rl_vi_check (); +#endif /* VI_MODE */ + + if (rl_done == 0) + (*rl_redisplay_function) (); + +#if defined (READLINE_CALLBACKS) + return 0; +#else + } + + return (eof_found); +#endif +} + +#if defined (READLINE_CALLBACKS) +static int +readline_internal_charloop () +{ + int eof; + + while (rl_done == 0) + eof = readline_internal_char (); + return (eof); +} +#endif /* READLINE_CALLBACKS */ + +/* Read a line of input from the global rl_instream, doing output on + the global rl_outstream. + If rl_prompt is non-null, then that is our prompt. */ +static char * +readline_internal () +{ + int eof; + + readline_internal_setup (); + eof = readline_internal_charloop (); + return (readline_internal_teardown (eof)); +} + +void +_rl_init_line_state () +{ + rl_point = rl_end = 0; + the_line = rl_line_buffer; + the_line[0] = 0; +} + +void +_rl_set_the_line () +{ + the_line = rl_line_buffer; +} + +/* Do the command associated with KEY in MAP. + If the associated command is really a keymap, then read + another key, and dispatch into that map. */ +int +_rl_dispatch (key, map) + register int key; + Keymap map; +{ + int r, newkey; + char *macro; + Function *func; + + if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) + { + if (map[ESC].type == ISKMAP) + { + if (_rl_defining_kbd_macro) + _rl_add_macro_char (ESC); + map = FUNCTION_TO_KEYMAP (map, ESC); + key = UNMETA (key); + rl_key_sequence_length += 2; + return (_rl_dispatch (key, map)); + } + else + ding (); + return 0; + } + + if (_rl_defining_kbd_macro) + _rl_add_macro_char (key); + + r = 0; + switch (map[key].type) + { + case ISFUNC: + func = map[key].function; + if (func != (Function *)NULL) + { + /* Special case rl_do_lowercase_version (). */ + if (func == rl_do_lowercase_version) + return (_rl_dispatch (_rl_to_lower (key), map)); + + rl_executing_keymap = map; + +#if 0 + _rl_suppress_redisplay = (map[key].function == rl_insert) && _rl_input_available (); +#endif + + rl_dispatching = 1; + r = (*map[key].function)(rl_numeric_arg * rl_arg_sign, key); + rl_dispatching = 0; + + /* If we have input pending, then the last command was a prefix + command. Don't change the state of rl_last_func. Otherwise, + remember the last command executed in this variable. */ + if (!rl_pending_input && map[key].function != rl_digit_argument) + rl_last_func = map[key].function; + } + else + { + _rl_abort_internal (); + return -1; + } + break; + + case ISKMAP: + if (map[key].function != (Function *)NULL) + { + rl_key_sequence_length++; + newkey = rl_read_key (); + r = _rl_dispatch (newkey, FUNCTION_TO_KEYMAP (map, key)); + } + else + { + _rl_abort_internal (); + return -1; + } + break; + + case ISMACR: + if (map[key].function != (Function *)NULL) + { + macro = savestring ((char *)map[key].function); + _rl_with_macro_input (macro); + return 0; + } + break; + } +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap && + _rl_vi_textmod_command (key)) + _rl_vi_set_last (key, rl_numeric_arg, rl_arg_sign); +#endif + return (r); +} + +/* **************************************************************** */ +/* */ +/* Initializations */ +/* */ +/* **************************************************************** */ + +/* Initialize readline (and terminal if not already). */ +int +rl_initialize () +{ + /* If we have never been called before, initialize the + terminal and data structures. */ + if (!rl_initialized) + { + readline_initialize_everything (); + rl_initialized++; + } + + /* Initalize the current line information. */ + _rl_init_line_state (); + + /* We aren't done yet. We haven't even gotten started yet! */ + rl_done = 0; + + /* Tell the history routines what is going on. */ + start_using_history (); + + /* Make the display buffer match the state of the line. */ + rl_reset_line_state (); + + /* No such function typed yet. */ + rl_last_func = (Function *)NULL; + + /* Parsing of key-bindings begins in an enabled state. */ + _rl_parsing_conditionalized_out = 0; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + _rl_vi_initialize_line (); +#endif + + return 0; +} + +#if defined (__EMX__) +static void +_emx_build_environ () +{ + TIB *tibp; + PIB *pibp; + char *t, **tp; + int c; + + DosGetInfoBlocks (&tibp, &pibp); + t = pibp->pib_pchenv; + for (c = 1; *t; c++) + t += strlen (t) + 1; + tp = environ = (char **)xmalloc ((c + 1) * sizeof (char *)); + t = pibp->pib_pchenv; + while (*t) + { + *tp++ = t; + t += strlen (t) + 1; + } + *tp = 0; +} +#endif /* __EMX__ */ + +/* Initialize the entire state of the world. */ +static void +readline_initialize_everything () +{ +#if defined (__EMX__) + if (environ == 0) + _emx_build_environ (); +#endif + + /* Find out if we are running in Emacs. */ + running_in_emacs = get_env_value ("EMACS") != (char *)0; + + /* Set up input and output if they are not already set up. */ + if (!rl_instream) + rl_instream = stdin; + + if (!rl_outstream) + rl_outstream = stdout; + + /* Bind _rl_in_stream and _rl_out_stream immediately. These values + may change, but they may also be used before readline_internal () + is called. */ + _rl_in_stream = rl_instream; + _rl_out_stream = rl_outstream; + + /* Allocate data structures. */ + if (rl_line_buffer == 0) + rl_line_buffer = xmalloc (rl_line_buffer_len = DEFAULT_BUFFER_SIZE); + + /* Initialize the terminal interface. */ + _rl_init_terminal_io ((char *)NULL); + +#if !defined (__GO32__) + /* Bind tty characters to readline functions. */ + readline_default_bindings (); +#endif /* !__GO32__ */ + + /* Initialize the function names. */ + rl_initialize_funmap (); + + /* Decide whether we should automatically go into eight-bit mode. */ + _rl_init_eightbit (); + + /* Read in the init file. */ + rl_read_init_file ((char *)NULL); + + /* XXX */ + if (_rl_horizontal_scroll_mode && _rl_term_autowrap) + { + screenwidth--; + screenchars -= screenheight; + } + + /* Override the effect of any `set keymap' assignments in the + inputrc file. */ + rl_set_keymap_from_edit_mode (); + + /* Try to bind a common arrow key prefix, if not already bound. */ + bind_arrow_keys (); + + /* Enable the meta key, if this terminal has one. */ + if (_rl_enable_meta) + _rl_enable_meta_key (); + + /* If the completion parser's default word break characters haven't + been set yet, then do so now. */ + if (rl_completer_word_break_characters == (char *)NULL) + rl_completer_word_break_characters = rl_basic_word_break_characters; +} + +/* If this system allows us to look at the values of the regular + input editing characters, then bind them to their readline + equivalents, iff the characters are not bound to keymaps. */ +static void +readline_default_bindings () +{ + rltty_set_default_bindings (_rl_keymap); +} + +static void +bind_arrow_keys_internal () +{ + Function *f; + + f = rl_function_of_keyseq ("\033[A", _rl_keymap, (int *)NULL); + if (!f || f == rl_do_lowercase_version) + { + _rl_bind_if_unbound ("\033[A", rl_get_previous_history); + _rl_bind_if_unbound ("\033[B", rl_get_next_history); + _rl_bind_if_unbound ("\033[C", rl_forward); + _rl_bind_if_unbound ("\033[D", rl_backward); + } + + f = rl_function_of_keyseq ("\033OA", _rl_keymap, (int *)NULL); + if (!f || f == rl_do_lowercase_version) + { + _rl_bind_if_unbound ("\033OA", rl_get_previous_history); + _rl_bind_if_unbound ("\033OB", rl_get_next_history); + _rl_bind_if_unbound ("\033OC", rl_forward); + _rl_bind_if_unbound ("\033OD", rl_backward); + } +} + +/* Try and bind the common arrow key prefix after giving termcap and + the inputrc file a chance to bind them and create `real' keymaps + for the arrow key prefix. */ +static void +bind_arrow_keys () +{ + Keymap xkeymap; + + xkeymap = _rl_keymap; + + _rl_keymap = emacs_standard_keymap; + bind_arrow_keys_internal (); + +#if defined (VI_MODE) + _rl_keymap = vi_movement_keymap; + bind_arrow_keys_internal (); +#endif + + _rl_keymap = xkeymap; +} + + +/* **************************************************************** */ +/* */ +/* Numeric Arguments */ +/* */ +/* **************************************************************** */ + +/* Handle C-u style numeric args, as well as M--, and M-digits. */ +static int +rl_digit_loop () +{ + int key, c, sawminus, sawdigits; + + _rl_save_prompt (); + + sawminus = sawdigits = 0; + while (1) + { + rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); + key = c = rl_read_key (); + + /* If we see a key bound to `universal-argument' after seeing digits, + it ends the argument but is otherwise ignored. */ + if (_rl_keymap[c].type == ISFUNC && + _rl_keymap[c].function == rl_universal_argument) + { + if (sawdigits == 0) + { + rl_numeric_arg *= 4; + continue; + } + else + { + key = rl_read_key (); + _rl_restore_prompt (); + rl_clear_message (); + return (_rl_dispatch (key, _rl_keymap)); + } + } + + c = UNMETA (c); + + if (_rl_digit_p (c)) + { + rl_numeric_arg = rl_explicit_arg ? (rl_numeric_arg * 10) + c - '0' : c - '0'; + sawdigits = rl_explicit_arg = 1; + } + else if (c == '-' && rl_explicit_arg == 0) + { + rl_numeric_arg = sawminus = 1; + rl_arg_sign = -1; + } + else + { + /* Make M-- command equivalent to M--1 command. */ + if (sawminus && rl_numeric_arg == 1 && rl_explicit_arg == 0) + rl_explicit_arg = 1; + _rl_restore_prompt (); + rl_clear_message (); + return (_rl_dispatch (key, _rl_keymap)); + } + } + + return 0; +} + +/* Add the current digit to the argument in progress. */ +int +rl_digit_argument (ignore, key) + int ignore, key; +{ + rl_pending_input = key; + return (rl_digit_loop ()); +} + +/* What to do when you abort reading an argument. */ +int +rl_discard_argument () +{ + ding (); + rl_clear_message (); + _rl_init_argument (); + return 0; +} + +/* Create a default argument. */ +int +_rl_init_argument () +{ + rl_numeric_arg = rl_arg_sign = 1; + rl_explicit_arg = 0; + return 0; +} + +/* C-u, universal argument. Multiply the current argument by 4. + Read a key. If the key has nothing to do with arguments, then + dispatch on it. If the key is the abort character then abort. */ +int +rl_universal_argument (count, key) + int count, key; +{ + rl_numeric_arg *= 4; + return (rl_digit_loop ()); +} + +/* **************************************************************** */ +/* */ +/* Insert and Delete */ +/* */ +/* **************************************************************** */ + +/* Insert a string of text into the line at point. This is the only + way that you should do insertion. rl_insert () calls this + function. */ +int +rl_insert_text (string) + char *string; +{ + register int i, l = strlen (string); + + if (rl_end + l >= rl_line_buffer_len) + rl_extend_line_buffer (rl_end + l); + + for (i = rl_end; i >= rl_point; i--) + the_line[i + l] = the_line[i]; + strncpy (the_line + rl_point, string, l); + + /* Remember how to undo this if we aren't undoing something. */ + if (!_rl_doing_an_undo) + { + /* If possible and desirable, concatenate the undos. */ + if ((l == 1) && + rl_undo_list && + (rl_undo_list->what == UNDO_INSERT) && + (rl_undo_list->end == rl_point) && + (rl_undo_list->end - rl_undo_list->start < 20)) + rl_undo_list->end++; + else + rl_add_undo (UNDO_INSERT, rl_point, rl_point + l, (char *)NULL); + } + rl_point += l; + rl_end += l; + the_line[rl_end] = '\0'; + return l; +} + +/* Delete the string between FROM and TO. FROM is + inclusive, TO is not. */ +int +rl_delete_text (from, to) + int from, to; +{ + register char *text; + register int diff, i; + + /* Fix it if the caller is confused. */ + if (from > to) + SWAP (from, to); + + /* fix boundaries */ + if (to > rl_end) + { + to = rl_end; + if (from > to) + from = to; + } + + text = rl_copy_text (from, to); + + /* Some versions of strncpy() can't handle overlapping arguments. */ + diff = to - from; + for (i = from; i < rl_end - diff; i++) + the_line[i] = the_line[i + diff]; + + /* Remember how to undo this delete. */ + if (_rl_doing_an_undo == 0) + rl_add_undo (UNDO_DELETE, from, to, text); + else + free (text); + + rl_end -= diff; + the_line[rl_end] = '\0'; + return (diff); +} + +/* Fix up point so that it is within the line boundaries after killing + text. If FIX_MARK_TOO is non-zero, the mark is forced within line + boundaries also. */ + +#define _RL_FIX_POINT(x) \ + do { \ + if (x > rl_end) \ + x = rl_end; \ + else if (x < 0) \ + x = 0; \ + } while (0) + +void +_rl_fix_point (fix_mark_too) + int fix_mark_too; +{ + _RL_FIX_POINT (rl_point); + if (fix_mark_too) + _RL_FIX_POINT (rl_mark); +} +#undef _RL_FIX_POINT + +void +_rl_replace_text (text, start, end) + char *text; + int start, end; +{ + rl_begin_undo_group (); + rl_delete_text (start, end + 1); + rl_point = start; + rl_insert_text (text); + rl_end_undo_group (); +} + +/* **************************************************************** */ +/* */ +/* Readline character functions */ +/* */ +/* **************************************************************** */ + +/* This is not a gap editor, just a stupid line input routine. No hair + is involved in writing any of the functions, and none should be. */ + +/* Note that: + + rl_end is the place in the string that we would place '\0'; + i.e., it is always safe to place '\0' there. + + rl_point is the place in the string where the cursor is. Sometimes + this is the same as rl_end. + + Any command that is called interactively receives two arguments. + The first is a count: the numeric arg pased to this command. + The second is the key which invoked this command. +*/ + +/* **************************************************************** */ +/* */ +/* Movement Commands */ +/* */ +/* **************************************************************** */ + +/* Note that if you `optimize' the display for these functions, you cannot + use said functions in other functions which do not do optimizing display. + I.e., you will have to update the data base for rl_redisplay, and you + might as well let rl_redisplay do that job. */ + +/* Move forward COUNT characters. */ +int +rl_forward (count, key) + int count, key; +{ + if (count < 0) + rl_backward (-count, key); + else if (count > 0) + { + int end = rl_point + count; +#if defined (VI_MODE) + int lend = rl_end - (rl_editing_mode == vi_mode); +#else + int lend = rl_end; +#endif + + if (end > lend) + { + rl_point = lend; + ding (); + } + else + rl_point = end; + } + return 0; +} + +/* Move backward COUNT characters. */ +int +rl_backward (count, key) + int count, key; +{ + if (count < 0) + rl_forward (-count, key); + else if (count > 0) + { + if (rl_point < count) + { + rl_point = 0; + ding (); + } + else + rl_point -= count; + } + return 0; +} + +/* Move to the beginning of the line. */ +int +rl_beg_of_line (count, key) + int count, key; +{ + rl_point = 0; + return 0; +} + +/* Move to the end of the line. */ +int +rl_end_of_line (count, key) + int count, key; +{ + rl_point = rl_end; + return 0; +} + +/* Move forward a word. We do what Emacs does. */ +int +rl_forward_word (count, key) + int count, key; +{ + int c; + + if (count < 0) + { + rl_backward_word (-count, key); + return 0; + } + + while (count) + { + if (rl_point == rl_end) + return 0; + + /* If we are not in a word, move forward until we are in one. + Then, move forward until we hit a non-alphabetic character. */ + c = the_line[rl_point]; + if (alphabetic (c) == 0) + { + while (++rl_point < rl_end) + { + c = the_line[rl_point]; + if (alphabetic (c)) + break; + } + } + if (rl_point == rl_end) + return 0; + while (++rl_point < rl_end) + { + c = the_line[rl_point]; + if (alphabetic (c) == 0) + break; + } + --count; + } + return 0; +} + +/* Move backward a word. We do what Emacs does. */ +int +rl_backward_word (count, key) + int count, key; +{ + int c; + + if (count < 0) + { + rl_forward_word (-count, key); + return 0; + } + + while (count) + { + if (!rl_point) + return 0; + + /* Like rl_forward_word (), except that we look at the characters + just before point. */ + + c = the_line[rl_point - 1]; + if (alphabetic (c) == 0) + { + while (--rl_point) + { + c = the_line[rl_point - 1]; + if (alphabetic (c)) + break; + } + } + + while (rl_point) + { + c = the_line[rl_point - 1]; + if (alphabetic (c) == 0) + break; + else + --rl_point; + } + --count; + } + return 0; +} + +/* Clear the current line. Numeric argument to C-l does this. */ +int +rl_refresh_line () +{ + int curr_line, nleft; + + /* Find out whether or not there might be invisible characters in the + editing buffer. */ + if (rl_display_prompt == rl_prompt) + nleft = _rl_last_c_pos - screenwidth - rl_visible_prompt_length; + else + nleft = _rl_last_c_pos - screenwidth; + + if (nleft > 0) + curr_line = 1 + nleft / screenwidth; + else + curr_line = 0; + + _rl_move_vert (curr_line); + _rl_move_cursor_relative (0, the_line); /* XXX is this right */ + +#if defined (__GO32__) + { + int row, col, width, row_start; + + ScreenGetCursor (&row, &col); + width = ScreenCols (); + row_start = ScreenPrimary + (row * width); + memset (row_start + col, 0, (width - col) * 2); + } +#else /* !__GO32__ */ + _rl_clear_to_eol (0); /* arg of 0 means to not use spaces */ +#endif /* !__GO32__ */ + + rl_forced_update_display (); + rl_display_fixed = 1; + + return 0; +} + +/* C-l typed to a line without quoting clears the screen, and then reprints + the prompt and the current input line. Given a numeric arg, redraw only + the current line. */ +int +rl_clear_screen (count, key) + int count, key; +{ + if (rl_explicit_arg) + { + rl_refresh_line (); + return 0; + } + + _rl_clear_screen (); /* calls termcap function to clear screen */ + rl_forced_update_display (); + rl_display_fixed = 1; + + return 0; +} + +int +rl_arrow_keys (count, c) + int count, c; +{ + int ch; + + ch = rl_read_key (); + + switch (_rl_to_upper (ch)) + { + case 'A': + rl_get_previous_history (count, ch); + break; + + case 'B': + rl_get_next_history (count, ch); + break; + + case 'C': + rl_forward (count, ch); + break; + + case 'D': + rl_backward (count, ch); + break; + + default: + ding (); + } + return 0; +} + + +/* **************************************************************** */ +/* */ +/* Text commands */ +/* */ +/* **************************************************************** */ + +/* Insert the character C at the current location, moving point forward. */ +int +rl_insert (count, c) + int count, c; +{ + register int i; + char *string; + + if (count <= 0) + return 0; + + /* If we can optimize, then do it. But don't let people crash + readline because of extra large arguments. */ + if (count > 1 && count <= 1024) + { + string = xmalloc (1 + count); + + for (i = 0; i < count; i++) + string[i] = c; + + string[i] = '\0'; + rl_insert_text (string); + free (string); + + return 0; + } + + if (count > 1024) + { + int decreaser; + char str[1024+1]; + + for (i = 0; i < 1024; i++) + str[i] = c; + + while (count) + { + decreaser = (count > 1024 ? 1024 : count); + str[decreaser] = '\0'; + rl_insert_text (str); + count -= decreaser; + } + + return 0; + } + + /* We are inserting a single character. + If there is pending input, then make a string of all of the + pending characters that are bound to rl_insert, and insert + them all. */ + if (_rl_any_typein ()) + _rl_insert_typein (c); + else + { + /* Inserting a single character. */ + char str[2]; + + str[1] = '\0'; + str[0] = c; + rl_insert_text (str); + } + return 0; +} + +/* Insert the next typed character verbatim. */ +int +rl_quoted_insert (count, key) + int count, key; +{ + int c; + + c = rl_read_key (); + return (rl_insert (count, c)); +} + +/* Insert a tab character. */ +int +rl_tab_insert (count, key) + int count, key; +{ + return (rl_insert (count, '\t')); +} + +/* What to do when a NEWLINE is pressed. We accept the whole line. + KEY is the key that invoked this command. I guess it could have + meaning in the future. */ +int +rl_newline (count, key) + int count, key; +{ + rl_done = 1; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + { + _rl_vi_done_inserting (); + _rl_vi_reset_last (); + } +#endif /* VI_MODE */ + + if (readline_echoing_p) + _rl_update_final (); + return 0; +} + +/* What to do for some uppercase characters, like meta characters, + and some characters appearing in emacs_ctlx_keymap. This function + is just a stub, you bind keys to it and the code in _rl_dispatch () + is special cased. */ +int +rl_do_lowercase_version (ignore1, ignore2) + int ignore1, ignore2; +{ + return 0; +} + +/* Rubout the character behind point. */ +int +rl_rubout (count, key) + int count, key; +{ + if (count < 0) + { + rl_delete (-count, key); + return 0; + } + + if (!rl_point) + { + ding (); + return -1; + } + + if (count > 1 || rl_explicit_arg) + { + int orig_point = rl_point; + rl_backward (count, key); + rl_kill_text (orig_point, rl_point); + } + else + { + int c = the_line[--rl_point]; + rl_delete_text (rl_point, rl_point + 1); + + if (rl_point == rl_end && isprint (c) && _rl_last_c_pos) + { + int l; + l = rl_character_len (c, rl_point); + _rl_erase_at_end_of_line (l); + } + } + return 0; +} + +/* Delete the character under the cursor. Given a numeric argument, + kill that many characters instead. */ +int +rl_delete (count, key) + int count, key; +{ + if (count < 0) + return (rl_rubout (-count, key)); + + if (rl_point == rl_end) + { + ding (); + return -1; + } + + if (count > 1 || rl_explicit_arg) + { + int orig_point = rl_point; + rl_forward (count, key); + rl_kill_text (orig_point, rl_point); + rl_point = orig_point; + return 0; + } + else + return (rl_delete_text (rl_point, rl_point + 1)); + +} + +/* Delete all spaces and tabs around point. */ +int +rl_delete_horizontal_space (count, ignore) + int count, ignore; +{ + int start = rl_point; + + while (rl_point && whitespace (the_line[rl_point - 1])) + rl_point--; + + start = rl_point; + + while (rl_point < rl_end && whitespace (the_line[rl_point])) + rl_point++; + + if (start != rl_point) + { + rl_delete_text (start, rl_point); + rl_point = start; + } + return 0; +} + +#ifndef RL_COMMENT_BEGIN_DEFAULT +#define RL_COMMENT_BEGIN_DEFAULT "#" +#endif + +/* Turn the current line into a comment in shell history. + A K*rn shell style function. */ +int +rl_insert_comment (count, key) + int count, key; +{ + rl_beg_of_line (1, key); + rl_insert_text (_rl_comment_begin ? _rl_comment_begin + : RL_COMMENT_BEGIN_DEFAULT); + (*rl_redisplay_function) (); + rl_newline (1, '\n'); + return (0); +} + +/* **************************************************************** */ +/* */ +/* Changing Case */ +/* */ +/* **************************************************************** */ + +/* The three kinds of things that we know how to do. */ +#define UpCase 1 +#define DownCase 2 +#define CapCase 3 + +static int rl_change_case (); + +/* Uppercase the word at point. */ +int +rl_upcase_word (count, key) + int count, key; +{ + return (rl_change_case (count, UpCase)); +} + +/* Lowercase the word at point. */ +int +rl_downcase_word (count, key) + int count, key; +{ + return (rl_change_case (count, DownCase)); +} + +/* Upcase the first letter, downcase the rest. */ +int +rl_capitalize_word (count, key) + int count, key; +{ + return (rl_change_case (count, CapCase)); +} + +/* The meaty function. + Change the case of COUNT words, performing OP on them. + OP is one of UpCase, DownCase, or CapCase. + If a negative argument is given, leave point where it started, + otherwise, leave it where it moves to. */ +static int +rl_change_case (count, op) + int count, op; +{ + register int start, end; + int inword, c; + + start = rl_point; + rl_forward_word (count, 0); + end = rl_point; + + if (count < 0) + SWAP (start, end); + + /* We are going to modify some text, so let's prepare to undo it. */ + rl_modifying (start, end); + + for (inword = 0; start < end; start++) + { + c = the_line[start]; + switch (op) + { + case UpCase: + the_line[start] = _rl_to_upper (c); + break; + + case DownCase: + the_line[start] = _rl_to_lower (c); + break; + + case CapCase: + the_line[start] = (inword == 0) ? _rl_to_upper (c) : _rl_to_lower (c); + inword = alphabetic (the_line[start]); + break; + + default: + ding (); + return -1; + } + } + rl_point = end; + return 0; +} + +/* **************************************************************** */ +/* */ +/* Transposition */ +/* */ +/* **************************************************************** */ + +/* Transpose the words at point. */ +int +rl_transpose_words (count, key) + int count, key; +{ + char *word1, *word2; + int w1_beg, w1_end, w2_beg, w2_end; + int orig_point = rl_point; + + if (!count) + return 0; + + /* Find the two words. */ + rl_forward_word (count, key); + w2_end = rl_point; + rl_backward_word (1, key); + w2_beg = rl_point; + rl_backward_word (count, key); + w1_beg = rl_point; + rl_forward_word (1, key); + w1_end = rl_point; + + /* Do some check to make sure that there really are two words. */ + if ((w1_beg == w2_beg) || (w2_beg < w1_end)) + { + ding (); + rl_point = orig_point; + return -1; + } + + /* Get the text of the words. */ + word1 = rl_copy_text (w1_beg, w1_end); + word2 = rl_copy_text (w2_beg, w2_end); + + /* We are about to do many insertions and deletions. Remember them + as one operation. */ + rl_begin_undo_group (); + + /* Do the stuff at word2 first, so that we don't have to worry + about word1 moving. */ + rl_point = w2_beg; + rl_delete_text (w2_beg, w2_end); + rl_insert_text (word1); + + rl_point = w1_beg; + rl_delete_text (w1_beg, w1_end); + rl_insert_text (word2); + + /* This is exactly correct since the text before this point has not + changed in length. */ + rl_point = w2_end; + + /* I think that does it. */ + rl_end_undo_group (); + free (word1); + free (word2); + + return 0; +} + +/* Transpose the characters at point. If point is at the end of the line, + then transpose the characters before point. */ +int +rl_transpose_chars (count, key) + int count, key; +{ + char dummy[2]; + + if (!count) + return 0; + + if (!rl_point || rl_end < 2) + { + ding (); + return -1; + } + + rl_begin_undo_group (); + + if (rl_point == rl_end) + { + --rl_point; + count = 1; + } + rl_point--; + + dummy[0] = the_line[rl_point]; + dummy[1] = '\0'; + + rl_delete_text (rl_point, rl_point + 1); + + rl_point += count; + _rl_fix_point (0); + rl_insert_text (dummy); + + rl_end_undo_group (); + return 0; +} + +/* **************************************************************** */ +/* */ +/* Character Searching */ +/* */ +/* **************************************************************** */ + +int +_rl_char_search_internal (count, dir, schar) + int count, dir, schar; +{ + int pos, inc; + + pos = rl_point; + inc = (dir < 0) ? -1 : 1; + while (count) + { + if ((dir < 0 && pos <= 0) || (dir > 0 && pos >= rl_end)) + { + ding (); + return -1; + } + + pos += inc; + do + { + if (rl_line_buffer[pos] == schar) + { + count--; + if (dir < 0) + rl_point = (dir == BTO) ? pos + 1 : pos; + else + rl_point = (dir == FTO) ? pos - 1 : pos; + break; + } + } + while ((dir < 0) ? pos-- : ++pos < rl_end); + } + return (0); +} + +/* Search COUNT times for a character read from the current input stream. + FDIR is the direction to search if COUNT is non-negative; otherwise + the search goes in BDIR. */ +static int +_rl_char_search (count, fdir, bdir) + int count, fdir, bdir; +{ + int c; + + c = rl_read_key (); + if (count < 0) + return (_rl_char_search_internal (-count, bdir, c)); + else + return (_rl_char_search_internal (count, fdir, c)); +} + +int +rl_char_search (count, key) + int count, key; +{ + return (_rl_char_search (count, FFIND, BFIND)); +} + +int +rl_backward_char_search (count, key) + int count, key; +{ + return (_rl_char_search (count, BFIND, FFIND)); +} + +/* **************************************************************** */ +/* */ +/* History Utilities */ +/* */ +/* **************************************************************** */ + +/* We already have a history library, and that is what we use to control + the history features of readline. This is our local interface to + the history mechanism. */ + +/* While we are editing the history, this is the saved + version of the original line. */ +HIST_ENTRY *saved_line_for_history = (HIST_ENTRY *)NULL; + +/* Set the history pointer back to the last entry in the history. */ +static void +start_using_history () +{ + using_history (); + if (saved_line_for_history) + _rl_free_history_entry (saved_line_for_history); + + saved_line_for_history = (HIST_ENTRY *)NULL; +} + +/* Free the contents (and containing structure) of a HIST_ENTRY. */ +void +_rl_free_history_entry (entry) + HIST_ENTRY *entry; +{ + if (entry == 0) + return; + if (entry->line) + free (entry->line); + free (entry); +} + +/* Perhaps put back the current line if it has changed. */ +int +maybe_replace_line () +{ + HIST_ENTRY *temp; + + temp = current_history (); + /* If the current line has changed, save the changes. */ + if (temp && ((UNDO_LIST *)(temp->data) != rl_undo_list)) + { + temp = replace_history_entry (where_history (), the_line, rl_undo_list); + free (temp->line); + free (temp); + } + return 0; +} + +/* Put back the saved_line_for_history if there is one. */ +int +maybe_unsave_line () +{ + int line_len; + + if (saved_line_for_history) + { + line_len = strlen (saved_line_for_history->line); + + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + + strcpy (the_line, saved_line_for_history->line); + rl_undo_list = (UNDO_LIST *)saved_line_for_history->data; + _rl_free_history_entry (saved_line_for_history); + saved_line_for_history = (HIST_ENTRY *)NULL; + rl_end = rl_point = strlen (the_line); + } + else + ding (); + return 0; +} + +/* Save the current line in saved_line_for_history. */ +int +maybe_save_line () +{ + if (saved_line_for_history == 0) + { + saved_line_for_history = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + saved_line_for_history->line = savestring (the_line); + saved_line_for_history->data = (char *)rl_undo_list; + } + return 0; +} + +/* **************************************************************** */ +/* */ +/* History Commands */ +/* */ +/* **************************************************************** */ + +/* Meta-< goes to the start of the history. */ +int +rl_beginning_of_history (count, key) + int count, key; +{ + return (rl_get_previous_history (1 + where_history (), key)); +} + +/* Meta-> goes to the end of the history. (The current line). */ +int +rl_end_of_history (count, key) + int count, key; +{ + maybe_replace_line (); + using_history (); + maybe_unsave_line (); + return 0; +} + +/* Move down to the next history line. */ +int +rl_get_next_history (count, key) + int count, key; +{ + HIST_ENTRY *temp; + int line_len; + + if (count < 0) + return (rl_get_previous_history (-count, key)); + + if (count == 0) + return 0; + + maybe_replace_line (); + + temp = (HIST_ENTRY *)NULL; + while (count) + { + temp = next_history (); + if (!temp) + break; + --count; + } + + if (temp == 0) + maybe_unsave_line (); + else + { + line_len = strlen (temp->line); + + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + + strcpy (the_line, temp->line); + rl_undo_list = (UNDO_LIST *)temp->data; + rl_end = rl_point = strlen (the_line); +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + rl_point = 0; +#endif /* VI_MODE */ + } + return 0; +} + +/* Get the previous item out of our interactive history, making it the current + line. If there is no previous history, just ding. */ +int +rl_get_previous_history (count, key) + int count, key; +{ + HIST_ENTRY *old_temp, *temp; + int line_len; + + if (count < 0) + return (rl_get_next_history (-count, key)); + + if (count == 0) + return 0; + + /* If we don't have a line saved, then save this one. */ + maybe_save_line (); + + /* If the current line has changed, save the changes. */ + maybe_replace_line (); + + temp = old_temp = (HIST_ENTRY *)NULL; + while (count) + { + temp = previous_history (); + if (temp == 0) + break; + + old_temp = temp; + --count; + } + + /* If there was a large argument, and we moved back to the start of the + history, that is not an error. So use the last value found. */ + if (!temp && old_temp) + temp = old_temp; + + if (temp == 0) + ding (); + else + { + line_len = strlen (temp->line); + + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + + strcpy (the_line, temp->line); + rl_undo_list = (UNDO_LIST *)temp->data; + rl_end = rl_point = line_len; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + rl_point = 0; +#endif /* VI_MODE */ + } + return 0; +} + +/* **************************************************************** */ +/* */ +/* The Mark and the Region. */ +/* */ +/* **************************************************************** */ + +/* Set the mark at POSITION. */ +int +_rl_set_mark_at_pos (position) + int position; +{ + if (position > rl_end) + return -1; + + rl_mark = position; + return 0; +} + +/* A bindable command to set the mark. */ +int +rl_set_mark (count, key) + int count, key; +{ + return (_rl_set_mark_at_pos (rl_explicit_arg ? count : rl_point)); +} + +/* Exchange the position of mark and point. */ +int +rl_exchange_point_and_mark (count, key) + int count, key; +{ + if (rl_mark > rl_end) + rl_mark = -1; + + if (rl_mark == -1) + { + ding (); + return -1; + } + else + SWAP (rl_point, rl_mark); + + return 0; +} + +/* **************************************************************** */ +/* */ +/* Editing Modes */ +/* */ +/* **************************************************************** */ +/* How to toggle back and forth between editing modes. */ +int +rl_vi_editing_mode (count, key) + int count, key; +{ +#if defined (VI_MODE) + rl_editing_mode = vi_mode; + rl_vi_insertion_mode (1, key); +#endif /* VI_MODE */ + return 0; +} + +int +rl_emacs_editing_mode (count, key) + int count, key; +{ + rl_editing_mode = emacs_mode; + _rl_keymap = emacs_standard_keymap; + return 0; +} diff --git a/readline/readline.h b/readline/readline.h new file mode 100644 index 00000000000..280ec32f13f --- /dev/null +++ b/readline/readline.h @@ -0,0 +1,416 @@ +/* Readline.h -- the names of functions callable from within readline. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_READLINE_H_) +#define _READLINE_H_ + +#if defined (READLINE_LIBRARY) +# include "keymaps.h" +# include "tilde.h" +#else +# include <readline/keymaps.h> +# include <readline/tilde.h> +#endif + +/* Readline data structures. */ + +/* Maintaining the state of undo. We remember individual deletes and inserts + on a chain of things to do. */ + +/* The actions that undo knows how to undo. Notice that UNDO_DELETE means + to insert some text, and UNDO_INSERT means to delete some text. I.e., + the code tells undo what to undo, not how to undo it. */ +enum undo_code { UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END }; + +/* What an element of THE_UNDO_LIST looks like. */ +typedef struct undo_list { + struct undo_list *next; + int start, end; /* Where the change took place. */ + char *text; /* The text to insert, if undoing a delete. */ + enum undo_code what; /* Delete, Insert, Begin, End. */ +} UNDO_LIST; + +/* The current undo list for RL_LINE_BUFFER. */ +extern UNDO_LIST *rl_undo_list; + +/* The data structure for mapping textual names to code addresses. */ +typedef struct _funmap { + char *name; + Function *function; +} FUNMAP; + +extern FUNMAP **funmap; + +/* Functions available to bind to key sequences. */ +extern int + rl_tilde_expand (), rl_set_mark (), rl_exchange_point_and_mark (), + rl_beg_of_line (), rl_backward (), rl_delete (), rl_end_of_line (), + rl_forward (), ding (), rl_newline (), rl_kill_line (), + rl_copy_region_to_kill (), rl_kill_region (), rl_char_search (), + rl_clear_screen (), rl_get_next_history (), rl_get_previous_history (), + rl_quoted_insert (), rl_reverse_search_history (), rl_transpose_chars (), + rl_unix_line_discard (), rl_unix_word_rubout (), + rl_yank (), rl_rubout (), rl_backward_word (), rl_kill_word (), + rl_forward_word (), rl_tab_insert (), rl_yank_pop (), rl_yank_nth_arg (), + rl_backward_kill_word (), rl_backward_kill_line (), rl_transpose_words (), + rl_complete (), rl_possible_completions (), rl_insert_completions (), + rl_menu_complete (), + rl_do_lowercase_version (), rl_kill_full_line (), + rl_digit_argument (), rl_universal_argument (), rl_abort (), + rl_undo_command (), rl_revert_line (), rl_beginning_of_history (), + rl_end_of_history (), rl_forward_search_history (), rl_insert (), + rl_upcase_word (), rl_downcase_word (), rl_capitalize_word (), + rl_restart_output (), rl_re_read_init_file (), + rl_dump_functions (), rl_dump_variables (), rl_dump_macros (), + rl_delete_horizontal_space (), rl_history_search_forward (), + rl_history_search_backward (), rl_tty_status (), rl_yank_last_arg (), + rl_insert_comment (), rl_backward_char_search (), + rl_copy_forward_word (), rl_copy_backward_word (); + +/* Not available unless readline is compiled -DPAREN_MATCHING. */ +extern int rl_insert_close (); + +/* Not available unless READLINE_CALLBACKS is defined. */ +extern void rl_callback_handler_install (); +extern void rl_callback_read_char (); +extern void rl_callback_handler_remove (); + +/* Not available unless __CYGWIN32__ is defined. */ +#ifdef __CYGWIN32__ +extern int rl_paste_from_clipboard (); +#endif + +/* These are *both* defined even when VI_MODE is not. */ +extern int rl_vi_editing_mode (), rl_emacs_editing_mode (); + +/* Non incremental history searching. */ +extern int rl_noninc_forward_search (); +extern int rl_noninc_reverse_search (); +extern int rl_noninc_forward_search_again (); +extern int rl_noninc_reverse_search_again (); + +/* Things for vi mode. Not available unless readline is compiled -DVI_MODE. */ +extern int rl_vi_check (); +extern int + rl_vi_undo (), rl_vi_redo (), rl_vi_tilde_expand (), + rl_vi_movement_mode (), rl_vi_insertion_mode (), rl_vi_arg_digit (), + rl_vi_prev_word (), rl_vi_next_word (), rl_vi_char_search (), + rl_vi_eof_maybe (), rl_vi_append_mode (), rl_vi_put (), + rl_vi_append_eol (), rl_vi_insert_beg (), rl_vi_delete (), + rl_vi_first_print (), rl_vi_fword (), rl_vi_fWord (), rl_vi_bword (), + rl_vi_bWord (), rl_vi_eword (), rl_vi_eWord (), rl_vi_end_word (), + rl_vi_change_case (), rl_vi_match (), rl_vi_bracktype (), + rl_vi_change_char (), rl_vi_yank_arg (), rl_vi_search (), + rl_vi_search_again (), rl_vi_subst (), rl_vi_overstrike (), + rl_vi_overstrike_delete (), rl_vi_replace(), rl_vi_column (), + rl_vi_delete_to (), rl_vi_change_to (), rl_vi_yank_to (), + rl_vi_complete (), rl_vi_fetch_history (), rl_vi_set_mark (), + rl_vi_goto_mark (), rl_vi_back_to_indent (); + +/* Keyboard macro commands. */ +extern int rl_start_kbd_macro (), rl_end_kbd_macro (); +extern int rl_call_last_kbd_macro (); +extern void rl_push_macro_input (); + +extern int rl_arrow_keys(), rl_refresh_line (); + +/* **************************************************************** */ +/* */ +/* Well Published Functions */ +/* */ +/* **************************************************************** */ + +/* Readline functions. */ +/* Read a line of input. Prompt with PROMPT. A NULL PROMPT means none. */ +extern char *readline (); + +/* These functions are from bind.c. */ +/* rl_add_defun (char *name, Function *function, int key) + Add NAME to the list of named functions. Make FUNCTION + be the function that gets called. + If KEY is not -1, then bind it. */ +extern int rl_add_defun (); + +extern Keymap rl_make_bare_keymap (); +extern Keymap rl_copy_keymap (); +extern Keymap rl_make_keymap (); +extern void rl_discard_keymap (); +extern Keymap rl_get_keymap (), rl_get_keymap_by_name (); +extern void rl_set_keymap (); +extern char *rl_get_keymap_name (); + +extern int rl_bind_key (), rl_bind_key_in_map (); +extern int rl_unbind_key (), rl_unbind_key_in_map (); +extern int rl_unbind_function_in_map (), rl_unbind_command_in_map (); +extern int rl_set_key (); +extern int rl_generic_bind (); +extern int rl_parse_and_bind (); +/* Backwards compatibility, use rl_generic_bind instead. */ +extern int rl_macro_bind (), rl_variable_bind (); + +extern int rl_read_init_file (); + +extern Function *rl_named_function (), *rl_function_of_keyseq (); +extern char **rl_invoking_keyseqs (), **rl_invoking_keyseqs_in_map (); +extern void rl_function_dumper (); +extern void rl_variable_dumper (); +extern void rl_macro_dumper (); +extern void rl_list_funmap_names (); + +/* Undocumented in the texinfo manual; not really useful to programs. */ +extern int rl_translate_keyseq (); +extern void rl_initialize_funmap (); + +/* Functions for undoing. */ +extern int rl_begin_undo_group (), rl_end_undo_group (); +extern void rl_add_undo (), free_undo_list (); +extern int rl_do_undo (); +extern int rl_modifying (); + +/* Functions for redisplay. */ +extern void rl_redisplay (); +extern int rl_forced_update_display (); +extern int rl_clear_message (); +extern int rl_reset_line_state (); +extern int rl_on_new_line (); + +#if defined (__STDC__) && defined (USE_VARARGS) && defined (PREFER_STDARG) +extern int rl_message (const char *, ...); +#else +extern int rl_message (); +#endif + +/* Undocumented in texinfo manual. */ +extern int rl_character_len (); +extern int rl_show_char (); +extern int crlf (); + +/* Modifying text. */ +extern int rl_insert_text (), rl_delete_text (); +extern int rl_kill_text (); +extern char *rl_copy_text (); + +/* `Public' utility functions. */ +extern int rl_reset_terminal (); +extern int rl_stuff_char (); +extern int rl_read_key (), rl_getc (); + +extern int rl_initialize (); + +/* Undocumented. */ +extern int rl_expand_prompt (); +extern int rl_set_signals (), rl_clear_signals (); +extern int maybe_save_line (), maybe_unsave_line (), maybe_replace_line (); + +/* Completion functions. */ +/* These functions are from complete.c. */ +extern int rl_complete_internal (); + +/* Return an array of strings which are the result of repeatadly calling + FUNC with TEXT. */ +extern char **completion_matches (); +extern char *username_completion_function (); +extern char *filename_completion_function (); + +/* **************************************************************** */ +/* */ +/* Well Published Variables */ +/* */ +/* **************************************************************** */ + +/* The version of this incarnation of the readline library. */ +extern char *rl_library_version; + +/* The name of the calling program. You should initialize this to + whatever was in argv[0]. It is used when parsing conditionals. */ +extern char *rl_readline_name; + +/* The prompt readline uses. This is set from the argument to + readline (), and should not be assigned to directly. */ +extern char *rl_prompt; + +/* The line buffer that is in use. */ +extern char *rl_line_buffer; + +/* The location of point, and end. */ +extern int rl_point, rl_end; + +extern int rl_mark; + +extern int rl_done; + +extern int rl_pending_input; + +/* Non-zero if we called this function from _rl_dispatch(). It's present + so functions can find out whether they were called from a key binding + or directly from an application. */ +extern int rl_dispatching; + +/* The name of the terminal to use. */ +extern char *rl_terminal_name; + +/* The input and output streams. */ +extern FILE *rl_instream, *rl_outstream; + +/* If non-zero, then this is the address of a function to call just + before readline_internal () prints the first prompt. */ +extern Function *rl_startup_hook; + +/* The address of a function to call periodically while Readline is + awaiting character input, or NULL, for no event handling. */ +extern Function *rl_event_hook; + +extern Function *rl_getc_function; +extern VFunction *rl_redisplay_function; +extern VFunction *rl_prep_term_function; +extern VFunction *rl_deprep_term_function; + +/* Dispatch variables. */ +extern Keymap rl_executing_keymap; +extern Keymap rl_binding_keymap; + +/* Completion variables. */ +/* Pointer to the generator function for completion_matches (). + NULL means to use filename_entry_function (), the default filename + completer. */ +extern Function *rl_completion_entry_function; + +/* If rl_ignore_some_completions_function is non-NULL it is the address + of a function to call after all of the possible matches have been + generated, but before the actual completion is done to the input line. + The function is called with one argument; a NULL terminated array + of (char *). If your function removes any of the elements, they + must be free()'ed. */ +extern Function *rl_ignore_some_completions_function; + +/* Pointer to alternative function to create matches. + Function is called with TEXT, START, and END. + START and END are indices in RL_LINE_BUFFER saying what the boundaries + of TEXT are. + If this function exists and returns NULL then call the value of + rl_completion_entry_function to try to match, otherwise use the + array of strings returned. */ +extern CPPFunction *rl_attempted_completion_function; + +/* The basic list of characters that signal a break between words for the + completer routine. The initial contents of this variable is what + breaks words in the shell, i.e. "n\"\\'`@$>". */ +extern char *rl_basic_word_break_characters; + +/* The list of characters that signal a break between words for + rl_complete_internal. The default list is the contents of + rl_basic_word_break_characters. */ +extern char *rl_completer_word_break_characters; + +/* List of characters which can be used to quote a substring of the line. + Completion occurs on the entire substring, and within the substring + rl_completer_word_break_characters are treated as any other character, + unless they also appear within this list. */ +extern char *rl_completer_quote_characters; + +/* List of quote characters which cause a word break. */ +extern char *rl_basic_quote_characters; + +/* List of characters that need to be quoted in filenames by the completer. */ +extern char *rl_filename_quote_characters; + +/* List of characters that are word break characters, but should be left + in TEXT when it is passed to the completion function. The shell uses + this to help determine what kind of completing to do. */ +extern char *rl_special_prefixes; + +/* If non-zero, then this is the address of a function to call when + completing on a directory name. The function is called with + the address of a string (the current directory name) as an arg. */ +extern Function *rl_directory_completion_hook; + +/* Backwards compatibility with previous versions of readline. */ +#define rl_symbolic_link_hook rl_directory_completion_hook + +/* Non-zero means that the results of the matches are to be treated + as filenames. This is ALWAYS zero on entry, and can only be changed + within a completion entry finder function. */ +extern int rl_filename_completion_desired; + +/* Non-zero means that the results of the matches are to be quoted using + double quotes (or an application-specific quoting mechanism) if the + filename contains any characters in rl_word_break_chars. This is + ALWAYS non-zero on entry, and can only be changed within a completion + entry finder function. */ +extern int rl_filename_quoting_desired; + +/* Set to a function to quote a filename in an application-specific fashion. + Called with the text to quote, the type of match found (single or multiple) + and a pointer to the quoting character to be used, which the function can + reset if desired. */ +extern CPFunction *rl_filename_quoting_function; + +/* Function to call to remove quoting characters from a filename. Called + before completion is attempted, so the embedded quotes do not interfere + with matching names in the file system. */ +extern CPFunction *rl_filename_dequoting_function; + +/* Function to call to decide whether or not a word break character is + quoted. If a character is quoted, it does not break words for the + completer. */ +extern Function *rl_char_is_quoted_p; + +/* Non-zero means to suppress normal filename completion after the + user-specified completion function has been called. */ +extern int rl_attempted_completion_over; + +/* Set to a character describing the type of completion being attempted by + rl_complete_internal; available for use by application completion + functions. */ +extern int rl_completion_type; + +/* Character appended to completed words when at the end of the line. The + default is a space. Nothing is added if this is '\0'. */ +extern int rl_completion_append_character; + +/* Up to this many items will be displayed in response to a + possible-completions call. After that, we ask the user if she + is sure she wants to see them all. The default value is 100. */ +extern int rl_completion_query_items; + +/* If non-zero, then disallow duplicates in the matches. */ +extern int rl_ignore_completion_duplicates; + +/* If this is non-zero, completion is (temporarily) inhibited, and the + completion character will be inserted as any other. */ +extern int rl_inhibit_completion; + +/* Definitions available for use by readline clients. */ +#define RL_PROMPT_START_IGNORE '\001' +#define RL_PROMPT_END_IGNORE '\002' + +/* Possible values for do_replace argument to rl_filename_quoting_function, + called by rl_complete_internal. */ +#define NO_MATCH 0 +#define SINGLE_MATCH 1 +#define MULT_MATCH 2 + +#if !defined (savestring) +extern char *savestring (); /* XXX backwards compatibility */ +#endif + +#endif /* _READLINE_H_ */ diff --git a/readline/rlconf.h b/readline/rlconf.h new file mode 100644 index 00000000000..8f07db155df --- /dev/null +++ b/readline/rlconf.h @@ -0,0 +1,63 @@ +/* rlconf.h -- readline configuration definitions */ + +/* Copyright (C) 1994 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_RLCONF_H_) +#define _RLCONF_H_ + +/* Define this if you want the vi-mode editing available. */ +#define VI_MODE + +/* Define this to get an indication of file type when listing completions. */ +#define VISIBLE_STATS + +/* If defined, readline shows opening parens and braces when closing + paren or brace entered. */ +/* #define PAREN_MATCHING */ + +/* This definition is needed by readline.c, rltty.c, and signals.c. */ +/* If on, then readline handles signals in a way that doesn't screw. */ +#define HANDLE_SIGNALS + +/* Ugly but working hack for binding prefix meta. */ +#define PREFIX_META_HACK + +/* The final, last-ditch effort file name for an init file. */ +#define DEFAULT_INPUTRC "~/.inputrc" + +/* If defined, expand tabs to spaces. */ +#define DISPLAY_TABS + +/* If defined, use the terminal escape sequence to move the cursor forward + over a character when updating the line rather than rewriting it. */ +/* #define HACK_TERMCAP_MOTION */ + +/* The string inserted by the `insert comment' command. */ +#define RL_COMMENT_BEGIN_DEFAULT "#" + +/* Define this if you want code that allows readline to be used in an + X `callback' style. */ +#if !defined (SHELL) +# define READLINE_CALLBACKS +#endif + +#endif /* _RLCONF_H_ */ diff --git a/readline/rldefs.h b/readline/rldefs.h new file mode 100644 index 00000000000..d4aced43e2a --- /dev/null +++ b/readline/rldefs.h @@ -0,0 +1,135 @@ +/* rldefs.h -- an attempt to isolate some of the system-specific defines + for readline. This should be included after any files that define + system-specific constants like _POSIX_VERSION or USG. */ + +/* Copyright (C) 1987,1989 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_RLDEFS_H_) +#define _RLDEFS_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +#if defined (_POSIX_VERSION) && !defined (TERMIOS_MISSING) +# define TERMIOS_TTY_DRIVER +#else +# if defined (HAVE_TERMIO_H) +# define TERMIO_TTY_DRIVER +# else +# define NEW_TTY_DRIVER +# endif +#endif + +/* Posix macro to check file in statbuf for directory-ness. + This requires that <sys/stat.h> be included before this test. */ +#if defined (S_IFDIR) && !defined (S_ISDIR) +# define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) +#endif + +/* Decide which flavor of the header file describing the C library + string functions to include and include it. */ + +#if defined (HAVE_STRING_H) +# include <string.h> +#else /* !HAVE_STRING_H */ +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +#if defined (PREFER_STDARG) +# include <stdarg.h> +#else +# if defined (PREFER_VARARGS) +# include <varargs.h> +# endif +#endif + +#if defined (HAVE_STRCASECMP) +#define _rl_stricmp strcasecmp +#define _rl_strnicmp strncasecmp +#else +extern int _rl_stricmp (), _rl_strnicmp (); +#endif + +#if !defined (emacs_mode) +# define no_mode -1 +# define vi_mode 0 +# define emacs_mode 1 +#endif + +/* If you cast map[key].function to type (Keymap) on a Cray, + the compiler takes the value of map[key].function and + divides it by 4 to convert between pointer types (pointers + to functions and pointers to structs are different sizes). + This is not what is wanted. */ +#if defined (CRAY) +# define FUNCTION_TO_KEYMAP(map, key) (Keymap)((int)map[key].function) +# define KEYMAP_TO_FUNCTION(data) (Function *)((int)(data)) +#else +# define FUNCTION_TO_KEYMAP(map, key) (Keymap)(map[key].function) +# define KEYMAP_TO_FUNCTION(data) (Function *)(data) +#endif + +#ifndef savestring +extern char *xmalloc (); +#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x)) +#endif + +/* Possible values for _rl_bell_preference. */ +#define NO_BELL 0 +#define AUDIBLE_BELL 1 +#define VISIBLE_BELL 2 + +/* Definitions used when searching the line for characters. */ +/* NOTE: it is necessary that opposite directions are inverses */ +#define FTO 1 /* forward to */ +#define BTO -1 /* backward to */ +#define FFIND 2 /* forward find */ +#define BFIND -2 /* backward find */ + +/* Possible values for the found_quote flags word used by the completion + functions. It says what kind of (shell-like) quoting we found anywhere + in the line. */ +#define RL_QF_SINGLE_QUOTE 0x1 +#define RL_QF_DOUBLE_QUOTE 0x2 +#define RL_QF_BACKSLASH 0x4 + +/* Default readline line buffer length. */ +#define DEFAULT_BUFFER_SIZE 256 + +#if !defined (STREQ) +#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) +#define STREQN(a, b, n) (((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) +#endif + +#if !defined (FREE) +# define FREE(x) if (x) free (x) +#endif + +/* CONFIGURATION SECTION */ +#include "rlconf.h" + +#endif /* !_RLDEFS_H_ */ diff --git a/readline/rltty.c b/readline/rltty.c new file mode 100644 index 00000000000..8312963abcb --- /dev/null +++ b/readline/rltty.c @@ -0,0 +1,728 @@ +/* rltty.c -- functions to prepare and restore the terminal for readline's + use. */ + +/* Copyright (C) 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include <signal.h> +#include <errno.h> +#include <stdio.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#include "rldefs.h" + +#if !defined (SHELL) && defined (GWINSZ_IN_SYS_IOCTL) +# include <sys/ioctl.h> +#endif /* !SHELL && GWINSZ_IN_SYS_IOCTL */ + +#include "rltty.h" +#include "readline.h" + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +extern int readline_echoing_p; +extern int _rl_eof_char; + +extern int _rl_enable_keypad, _rl_enable_meta; + +extern void _rl_control_keypad (); + +#if defined (__GO32__) +# include <pc.h> +# undef HANDLE_SIGNALS +#endif /* __GO32__ */ + +/* Indirect functions to allow apps control over terminal management. */ +extern void rl_prep_terminal (), rl_deprep_terminal (); + +VFunction *rl_prep_term_function = rl_prep_terminal; +VFunction *rl_deprep_term_function = rl_deprep_terminal; + +/* **************************************************************** */ +/* */ +/* Signal Management */ +/* */ +/* **************************************************************** */ + +#if defined (HAVE_POSIX_SIGNALS) +static sigset_t sigint_set, sigint_oset; +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) +static int sigint_oldmask; +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +static int sigint_blocked; + +/* Cause SIGINT to not be delivered until the corresponding call to + release_sigint(). */ +static void +block_sigint () +{ + if (sigint_blocked) + return; + +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&sigint_set); + sigemptyset (&sigint_oset); + sigaddset (&sigint_set, SIGINT); + sigprocmask (SIG_BLOCK, &sigint_set, &sigint_oset); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + sigint_oldmask = sigblock (sigmask (SIGINT)); +# else /* !HAVE_BSD_SIGNALS */ +# if defined (HAVE_USG_SIGHOLD) + sighold (SIGINT); +# endif /* HAVE_USG_SIGHOLD */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + sigint_blocked = 1; +} + +/* Allow SIGINT to be delivered. */ +static void +release_sigint () +{ + if (!sigint_blocked) + return; + +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_SETMASK, &sigint_oset, (sigset_t *)NULL); +#else +# if defined (HAVE_BSD_SIGNALS) + sigsetmask (sigint_oldmask); +# else /* !HAVE_BSD_SIGNALS */ +# if defined (HAVE_USG_SIGHOLD) + sigrelse (SIGINT); +# endif /* HAVE_USG_SIGHOLD */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + + sigint_blocked = 0; +} + +/* **************************************************************** */ +/* */ +/* Saving and Restoring the TTY */ +/* */ +/* **************************************************************** */ + +/* Non-zero means that the terminal is in a prepped state. */ +static int terminal_prepped; + +/* If non-zero, means that this process has called tcflow(fd, TCOOFF) + and output is suspended. */ +#if defined (__ksr1__) +static int ksrflow; +#endif + +#if !defined (SHELL) && defined (TIOCGWINSZ) +/* Dummy call to force a backgrounded readline to stop before it tries + to get the tty settings. */ +static void +set_winsize (tty) + int tty; +{ + struct winsize w; + + if (ioctl (tty, TIOCGWINSZ, &w) == 0) + (void) ioctl (tty, TIOCSWINSZ, &w); +} +#else /* SHELL || !TIOCGWINSZ */ +# define set_winsize(tty) +#endif /* SHELL || !TIOCGWINSZ */ + +#if defined (NEW_TTY_DRIVER) + +/* Values for the `flags' field of a struct bsdtty. This tells which + elements of the struct bsdtty have been fetched from the system and + are valid. */ +#define SGTTY_SET 0x01 +#define LFLAG_SET 0x02 +#define TCHARS_SET 0x04 +#define LTCHARS_SET 0x08 + +struct bsdtty { + struct sgttyb sgttyb; /* Basic BSD tty driver information. */ + int lflag; /* Local mode flags, like LPASS8. */ +#if defined (TIOCGETC) + struct tchars tchars; /* Terminal special characters, including ^S and ^Q. */ +#endif +#if defined (TIOCGLTC) + struct ltchars ltchars; /* 4.2 BSD editing characters */ +#endif + int flags; /* Bitmap saying which parts of the struct are valid. */ +}; + +#define TIOTYPE struct bsdtty + +static TIOTYPE otio; + +static int +get_tty_settings (tty, tiop) + int tty; + TIOTYPE *tiop; +{ + set_winsize (tty); + + tiop->flags = tiop->lflag = 0; + + ioctl (tty, TIOCGETP, &(tiop->sgttyb)); + tiop->flags |= SGTTY_SET; + +#if defined (TIOCLGET) + ioctl (tty, TIOCLGET, &(tiop->lflag)); + tiop->flags |= LFLAG_SET; +#endif + +#if defined (TIOCGETC) + ioctl (tty, TIOCGETC, &(tiop->tchars)); + tiop->flags |= TCHARS_SET; +#endif + +#if defined (TIOCGLTC) + ioctl (tty, TIOCGLTC, &(tiop->ltchars)); + tiop->flags |= LTCHARS_SET; +#endif + + return 0; +} + +static int +set_tty_settings (tty, tiop) + int tty; + TIOTYPE *tiop; +{ + if (tiop->flags & SGTTY_SET) + { + ioctl (tty, TIOCSETN, &(tiop->sgttyb)); + tiop->flags &= ~SGTTY_SET; + } + readline_echoing_p = 1; + +#if defined (TIOCLSET) + if (tiop->flags & LFLAG_SET) + { + ioctl (tty, TIOCLSET, &(tiop->lflag)); + tiop->flags &= ~LFLAG_SET; + } +#endif + +#if defined (TIOCSETC) + if (tiop->flags & TCHARS_SET) + { + ioctl (tty, TIOCSETC, &(tiop->tchars)); + tiop->flags &= ~TCHARS_SET; + } +#endif + +#if defined (TIOCSLTC) + if (tiop->flags & LTCHARS_SET) + { + ioctl (tty, TIOCSLTC, &(tiop->ltchars)); + tiop->flags &= ~LTCHARS_SET; + } +#endif + + return 0; +} + +static void +prepare_terminal_settings (meta_flag, otio, tiop) + int meta_flag; + TIOTYPE otio, *tiop; +{ +#if !defined (__GO32__) + readline_echoing_p = (otio.sgttyb.sg_flags & ECHO); + + /* Copy the original settings to the structure we're going to use for + our settings. */ + tiop->sgttyb = otio.sgttyb; + tiop->lflag = otio.lflag; +#if defined (TIOCGETC) + tiop->tchars = otio.tchars; +#endif +#if defined (TIOCGLTC) + tiop->ltchars = otio.ltchars; +#endif + tiop->flags = otio.flags; + + /* First, the basic settings to put us into character-at-a-time, no-echo + input mode. */ + tiop->sgttyb.sg_flags &= ~(ECHO | CRMOD); + tiop->sgttyb.sg_flags |= CBREAK; + + /* If this terminal doesn't care how the 8th bit is used, then we can + use it for the meta-key. If only one of even or odd parity is + specified, then the terminal is using parity, and we cannot. */ +#if !defined (ANYP) +# define ANYP (EVENP | ODDP) +#endif + if (((otio.sgttyb.sg_flags & ANYP) == ANYP) || + ((otio.sgttyb.sg_flags & ANYP) == 0)) + { + tiop->sgttyb.sg_flags |= ANYP; + + /* Hack on local mode flags if we can. */ +#if defined (TIOCLGET) +# if defined (LPASS8) + tiop->lflag |= LPASS8; +# endif /* LPASS8 */ +#endif /* TIOCLGET */ + } + +#if defined (TIOCGETC) +# if defined (USE_XON_XOFF) + /* Get rid of terminal output start and stop characters. */ + tiop->tchars.t_stopc = -1; /* C-s */ + tiop->tchars.t_startc = -1; /* C-q */ + + /* If there is an XON character, bind it to restart the output. */ + if (otio.tchars.t_startc != -1) + rl_bind_key (otio.tchars.t_startc, rl_restart_output); +# endif /* USE_XON_XOFF */ + + /* If there is an EOF char, bind _rl_eof_char to it. */ + if (otio.tchars.t_eofc != -1) + _rl_eof_char = otio.tchars.t_eofc; + +# if defined (NO_KILL_INTR) + /* Get rid of terminal-generated SIGQUIT and SIGINT. */ + tiop->tchars.t_quitc = -1; /* C-\ */ + tiop->tchars.t_intrc = -1; /* C-c */ +# endif /* NO_KILL_INTR */ +#endif /* TIOCGETC */ + +#if defined (TIOCGLTC) + /* Make the interrupt keys go away. Just enough to make people happy. */ + tiop->ltchars.t_dsuspc = -1; /* C-y */ + tiop->ltchars.t_lnextc = -1; /* C-v */ +#endif /* TIOCGLTC */ +#endif /* !__GO32__ */ +} + +#else /* !defined (NEW_TTY_DRIVER) */ + +#if !defined (VMIN) +# define VMIN VEOF +#endif + +#if !defined (VTIME) +# define VTIME VEOL +#endif + +#if defined (TERMIOS_TTY_DRIVER) +# define TIOTYPE struct termios +# define DRAIN_OUTPUT(fd) tcdrain (fd) +# define GETATTR(tty, tiop) (tcgetattr (tty, tiop)) +# ifdef M_UNIX +# define SETATTR(tty, tiop) (tcsetattr (tty, TCSANOW, tiop)) +# else +# define SETATTR(tty, tiop) (tcsetattr (tty, TCSADRAIN, tiop)) +# endif /* !M_UNIX */ +#else +# define TIOTYPE struct termio +# define DRAIN_OUTPUT(fd) +# define GETATTR(tty, tiop) (ioctl (tty, TCGETA, tiop)) +# define SETATTR(tty, tiop) (ioctl (tty, TCSETA, tiop)) +#endif /* !TERMIOS_TTY_DRIVER */ + +static TIOTYPE otio; + +#if defined (FLUSHO) +# define OUTPUT_BEING_FLUSHED(tp) (tp->c_lflag & FLUSHO) +#else +# define OUTPUT_BEING_FLUSHED(tp) 0 +#endif + +static void +rltty_warning (msg) + char *msg; +{ + fprintf (stderr, "readline: warning: %s\n", msg); +} + +#if defined (_AIX) +void +setopost(tp) +TIOTYPE *tp; +{ + if ((tp->c_oflag & OPOST) == 0) + { + rltty_warning ("turning on OPOST for terminal\r"); + tp->c_oflag |= OPOST|ONLCR; + } +} +#endif + +static int +get_tty_settings (tty, tiop) + int tty; + TIOTYPE *tiop; +{ + int ioctl_ret; + set_winsize (tty); + + while (1) + { + ioctl_ret = GETATTR (tty, tiop); + if (ioctl_ret < 0) + { + if (errno != EINTR) + return -1; + else + continue; + } + if (OUTPUT_BEING_FLUSHED (tiop)) + { +#if defined (FLUSHO) && defined (_AIX41) + rltty_warning ("turning off output flushing"); + tiop->c_lflag &= ~FLUSHO; + break; +#else + continue; +#endif + } + break; + } + +#if defined (_AIX) + setopost(tiop); +#endif + + return 0; +} + +static int +set_tty_settings (tty, tiop) + int tty; + TIOTYPE *tiop; +{ + while (SETATTR (tty, tiop) < 0) + { + if (errno != EINTR) + return -1; + errno = 0; + } + +#if 0 + +#if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + if (ksrflow) + { + ksrflow = 0; + tcflow (tty, TCOON); + } +# else /* !ksr1 */ + tcflow (tty, TCOON); /* Simulate a ^Q. */ +# endif /* !ksr1 */ +#else + ioctl (tty, TCXONC, 1); /* Simulate a ^Q. */ +#endif /* !TERMIOS_TTY_DRIVER */ + +#endif + + return 0; +} + +static void +prepare_terminal_settings (meta_flag, otio, tiop) + int meta_flag; + TIOTYPE otio, *tiop; +{ + readline_echoing_p = (otio.c_lflag & ECHO); + + tiop->c_lflag &= ~(ICANON | ECHO); + + if ((unsigned char) otio.c_cc[VEOF] != (unsigned char) _POSIX_VDISABLE) + _rl_eof_char = otio.c_cc[VEOF]; + +#if defined (USE_XON_XOFF) +#if defined (IXANY) + tiop->c_iflag &= ~(IXON | IXOFF | IXANY); +#else + /* `strict' Posix systems do not define IXANY. */ + tiop->c_iflag &= ~(IXON | IXOFF); +#endif /* IXANY */ +#endif /* USE_XON_XOFF */ + + /* Only turn this off if we are using all 8 bits. */ + if (((tiop->c_cflag & CSIZE) == CS8) || meta_flag) + tiop->c_iflag &= ~(ISTRIP | INPCK); + + /* Make sure we differentiate between CR and NL on input. */ + tiop->c_iflag &= ~(ICRNL | INLCR); + +#if !defined (HANDLE_SIGNALS) + tiop->c_lflag &= ~ISIG; +#else + tiop->c_lflag |= ISIG; +#endif + + tiop->c_cc[VMIN] = 1; + tiop->c_cc[VTIME] = 0; + +#if defined (FLUSHO) + if (OUTPUT_BEING_FLUSHED (tiop)) + { + tiop->c_lflag &= ~FLUSHO; + otio.c_lflag &= ~FLUSHO; + } +#endif + + /* Turn off characters that we need on Posix systems with job control, + just to be sure. This includes ^Y and ^V. This should not really + be necessary. */ +#if defined (TERMIOS_TTY_DRIVER) && defined (_POSIX_VDISABLE) + +#if defined (VLNEXT) + tiop->c_cc[VLNEXT] = _POSIX_VDISABLE; +#endif + +#if defined (VDSUSP) + tiop->c_cc[VDSUSP] = _POSIX_VDISABLE; +#endif + +#endif /* TERMIOS_TTY_DRIVER && _POSIX_VDISABLE */ +} +#endif /* NEW_TTY_DRIVER */ + +/* Put the terminal in CBREAK mode so that we can detect key presses. */ +void +rl_prep_terminal (meta_flag) + int meta_flag; +{ +#if !defined (__GO32__) + int tty; + TIOTYPE tio; + + if (terminal_prepped) + return; + + /* Try to keep this function from being INTerrupted. */ + block_sigint (); + + tty = fileno (rl_instream); + + if (get_tty_settings (tty, &tio) < 0) + { + release_sigint (); + return; + } + + otio = tio; + + prepare_terminal_settings (meta_flag, otio, &tio); + + if (set_tty_settings (tty, &tio) < 0) + { + release_sigint (); + return; + } + + if (_rl_enable_keypad) + _rl_control_keypad (1); + + fflush (rl_outstream); + terminal_prepped = 1; + + release_sigint (); +#endif /* !__GO32__ */ +} + +/* Restore the terminal's normal settings and modes. */ +void +rl_deprep_terminal () +{ +#if !defined (__GO32__) + int tty; + + if (!terminal_prepped) + return; + + /* Try to keep this function from being interrupted. */ + block_sigint (); + + tty = fileno (rl_instream); + + if (_rl_enable_keypad) + _rl_control_keypad (0); + + fflush (rl_outstream); + + if (set_tty_settings (tty, &otio) < 0) + { + release_sigint (); + return; + } + + terminal_prepped = 0; + + release_sigint (); +#endif /* !__GO32__ */ +} + +/* **************************************************************** */ +/* */ +/* Bogus Flow Control */ +/* */ +/* **************************************************************** */ + +int +rl_restart_output (count, key) + int count, key; +{ + int fildes = fileno (rl_outstream); +#if defined (TIOCSTART) +#if defined (apollo) + ioctl (&fildes, TIOCSTART, 0); +#else + ioctl (fildes, TIOCSTART, 0); +#endif /* apollo */ + +#else /* !TIOCSTART */ +# if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + if (ksrflow) + { + ksrflow = 0; + tcflow (fildes, TCOON); + } +# else /* !ksr1 */ + tcflow (fildes, TCOON); /* Simulate a ^Q. */ +# endif /* !ksr1 */ +# else /* !TERMIOS_TTY_DRIVER */ +# if defined (TCXONC) + ioctl (fildes, TCXONC, TCOON); +# endif /* TCXONC */ +# endif /* !TERMIOS_TTY_DRIVER */ +#endif /* !TIOCSTART */ + + return 0; +} + +int +rl_stop_output (count, key) + int count, key; +{ + int fildes = fileno (rl_instream); + +#if defined (TIOCSTOP) +# if defined (apollo) + ioctl (&fildes, TIOCSTOP, 0); +# else + ioctl (fildes, TIOCSTOP, 0); +# endif /* apollo */ +#else /* !TIOCSTOP */ +# if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + ksrflow = 1; +# endif /* ksr1 */ + tcflow (fildes, TCOOFF); +# else +# if defined (TCXONC) + ioctl (fildes, TCXONC, TCOON); +# endif /* TCXONC */ +# endif /* !TERMIOS_TTY_DRIVER */ +#endif /* !TIOCSTOP */ + + return 0; +} + +/* **************************************************************** */ +/* */ +/* Default Key Bindings */ +/* */ +/* **************************************************************** */ +void +rltty_set_default_bindings (kmap) + Keymap kmap; +{ + TIOTYPE ttybuff; + int tty = fileno (rl_instream); + +#if defined (NEW_TTY_DRIVER) + +#define SET_SPECIAL(sc, func) \ + do \ + { \ + int ic; \ + ic = sc; \ + if (ic != -1 && kmap[ic].type == ISFUNC) \ + kmap[ic].function = func; \ + } \ + while (0) + + if (get_tty_settings (tty, &ttybuff) == 0) + { + if (ttybuff.flags & SGTTY_SET) + { + SET_SPECIAL (ttybuff.sgttyb.sg_erase, rl_rubout); + SET_SPECIAL (ttybuff.sgttyb.sg_kill, rl_unix_line_discard); + } + +# if defined (TIOCGLTC) + if (ttybuff.flags & LTCHARS_SET) + { + SET_SPECIAL (ttybuff.ltchars.t_werasc, rl_unix_word_rubout); + SET_SPECIAL (ttybuff.ltchars.t_lnextc, rl_quoted_insert); + } +# endif /* TIOCGLTC */ + } + +#else /* !NEW_TTY_DRIVER */ + +#define SET_SPECIAL(sc, func) \ + do \ + { \ + unsigned char uc; \ + uc = ttybuff.c_cc[sc]; \ + if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) \ + kmap[uc].function = func; \ + } \ + while (0) + + if (get_tty_settings (tty, &ttybuff) == 0) + { + SET_SPECIAL (VERASE, rl_rubout); + SET_SPECIAL (VKILL, rl_unix_line_discard); + +# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER) + SET_SPECIAL (VLNEXT, rl_quoted_insert); +# endif /* VLNEXT && TERMIOS_TTY_DRIVER */ + +# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER) + SET_SPECIAL (VWERASE, rl_unix_word_rubout); +# endif /* VWERASE && TERMIOS_TTY_DRIVER */ + } +#endif /* !NEW_TTY_DRIVER */ +} diff --git a/readline/rltty.h b/readline/rltty.h new file mode 100644 index 00000000000..fe783463f6a --- /dev/null +++ b/readline/rltty.h @@ -0,0 +1,63 @@ +/* rltty.h - tty driver-related definitions used by some library files. */ + +/* Copyright (C) 1995 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_RLTTY_H_) +#define _RLTTY_H + +/* Posix systems use termios and the Posix signal functions. */ +#if defined (TERMIOS_TTY_DRIVER) +# include <termios.h> +#endif /* TERMIOS_TTY_DRIVER */ + +/* System V machines use termio. */ +#if defined (TERMIO_TTY_DRIVER) +# include <termio.h> +# if !defined (TCOON) +# define TCOON 1 +# endif +#endif /* TERMIO_TTY_DRIVER */ + +/* Other (BSD) machines use sgtty. */ +#if defined (NEW_TTY_DRIVER) +# include <sgtty.h> +#endif + +#include "rlwinsize.h" + +/* Define _POSIX_VDISABLE if we are not using the `new' tty driver and + it is not already defined. It is used both to determine if a + special character is disabled and to disable certain special + characters. Posix systems should set to 0, USG systems to -1. */ +#if !defined (NEW_TTY_DRIVER) && !defined (_POSIX_VDISABLE) +# if defined (_SVR4_VDISABLE) +# define _POSIX_VDISABLE _SVR4_VDISABLE +# else +# if defined (_POSIX_VERSION) +# define _POSIX_VDISABLE 0 +# else /* !_POSIX_VERSION */ +# define _POSIX_VDISABLE -1 +# endif /* !_POSIX_VERSION */ +# endif /* !_SVR4_DISABLE */ +#endif /* !NEW_TTY_DRIVER && !_POSIX_VDISABLE */ + +#endif /* _RLTTY_H_ */ diff --git a/readline/rlwinsize.h b/readline/rlwinsize.h new file mode 100644 index 00000000000..92b3de174bf --- /dev/null +++ b/readline/rlwinsize.h @@ -0,0 +1,58 @@ +/* rlwinsize.h -- an attempt to isolate some of the system-specific defines + for `struct winsize' and TIOCGWINSZ. */ + +/* Copyright (C) 1997 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_RLWINSIZE_H_) +#define _RLWINSIZE_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +/* Try to find the definitions of `struct winsize' and TIOGCWINSZ */ + +#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) +# include <sys/ioctl.h> +#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ + +#if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +# include <termios.h> +#endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ + +/* Not in either of the standard places, look around. */ +#if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +# if defined (HAVE_SYS_STREAM_H) +# include <sys/stream.h> +# endif /* HAVE_SYS_STREAM_H */ +# if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */ +# include <sys/ptem.h> +# define _IO_PTEM_H /* work around SVR4.2 1.1.4 bug */ +# endif /* HAVE_SYS_PTEM_H */ +# if defined (HAVE_SYS_PTE_H) /* ??? */ +# include <sys/pte.h> +# endif /* HAVE_SYS_PTE_H */ +#endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ + +#endif /* _RL_WINSIZE_H */ + + diff --git a/readline/search.c b/readline/search.c new file mode 100644 index 00000000000..3024ee59677 --- /dev/null +++ b/readline/search.c @@ -0,0 +1,378 @@ +/* search.c - code for non-incremental searching in emacs and vi modes. */ + +/* Copyright (C) 1992 Free Software Foundation, Inc. + + This file is part of the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include <stdio.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif + +#include "rldefs.h" +#include "readline.h" +#include "history.h" + +#ifdef abs +# undef abs +#endif +#define abs(x) (((x) >= 0) ? (x) : -(x)) + +extern char *xmalloc (), *xrealloc (); + +/* Variables imported from readline.c */ +extern int rl_point, rl_end, rl_line_buffer_len; +extern int rl_editing_mode; +extern char *rl_prompt; +extern char *rl_line_buffer; +extern HIST_ENTRY *saved_line_for_history; +extern Function *rl_last_func; + +/* Functions imported from the rest of the library. */ +extern int _rl_free_history_entry (); +extern char *_rl_make_prompt_for_search (); +extern void _rl_restore_prompt (); +extern void rl_extend_line_buffer (); + +static char *noninc_search_string = (char *) NULL; +static int noninc_history_pos; +static char *prev_line_found = (char *) NULL; + +/* Search the history list for STRING starting at absolute history position + POS. If STRING begins with `^', the search must match STRING at the + beginning of a history line, otherwise a full substring match is performed + for STRING. DIR < 0 means to search backwards through the history list, + DIR >= 0 means to search forward. */ +static int +noninc_search_from_pos (string, pos, dir) + char *string; + int pos, dir; +{ + int ret, old; + + old = where_history (); + history_set_pos (pos); + + if (*string == '^') + ret = history_search_prefix (string + 1, dir); + else + ret = history_search (string, dir); + + if (ret != -1) + ret = where_history (); + + history_set_pos (old); + return (ret); +} + +/* Search for a line in the history containing STRING. If DIR is < 0, the + search is backwards through previous entries, else through subsequent + entries. */ +static void +noninc_dosearch (string, dir) + char *string; + int dir; +{ + int oldpos, pos, line_len; + HIST_ENTRY *entry; + + if (string == 0 || *string == '\0' || noninc_history_pos < 0) + { + ding (); + return; + } + + pos = noninc_search_from_pos (string, noninc_history_pos + dir, dir); + if (pos == -1) + { + /* Search failed, current history position unchanged. */ + maybe_unsave_line (); + rl_clear_message (); + rl_point = 0; + ding (); + return; + } + + noninc_history_pos = pos; + + oldpos = where_history (); + history_set_pos (noninc_history_pos); + entry = current_history (); +#if defined (VI_MODE) + if (rl_editing_mode != vi_mode) +#endif + history_set_pos (oldpos); + + line_len = strlen (entry->line); + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + strcpy (rl_line_buffer, entry->line); + + rl_undo_list = (UNDO_LIST *)entry->data; + rl_end = strlen (rl_line_buffer); + rl_point = 0; + rl_clear_message (); + + if (saved_line_for_history) + _rl_free_history_entry (saved_line_for_history); + saved_line_for_history = (HIST_ENTRY *)NULL; +} + +/* Search non-interactively through the history list. DIR < 0 means to + search backwards through the history of previous commands; otherwise + the search is for commands subsequent to the current position in the + history list. PCHAR is the character to use for prompting when reading + the search string; if not specified (0), it defaults to `:'. */ +static void +noninc_search (dir, pchar) + int dir; + int pchar; +{ + int saved_point, c; + char *p; + + maybe_save_line (); + saved_point = rl_point; + + /* Use the line buffer to read the search string. */ + rl_line_buffer[0] = 0; + rl_end = rl_point = 0; + + p = _rl_make_prompt_for_search (pchar ? pchar : ':'); + rl_message (p, 0, 0); + free (p); + +#define SEARCH_RETURN _rl_restore_prompt (); return + + /* Read the search string. */ + while (c = rl_read_key ()) + { + switch (c) + { + case CTRL('H'): + case RUBOUT: + if (rl_point == 0) + { + maybe_unsave_line (); + rl_clear_message (); + rl_point = saved_point; + SEARCH_RETURN; + } + rl_rubout (1, c); + break; + + case CTRL('W'): + rl_unix_word_rubout (1, c); + break; + + case CTRL('U'): + rl_unix_line_discard (1, c); + break; + + case RETURN: + case NEWLINE: + goto dosearch; + /* NOTREACHED */ + break; + + case CTRL('C'): + case CTRL('G'): + maybe_unsave_line (); + rl_clear_message (); + rl_point = saved_point; + ding (); + SEARCH_RETURN; + + default: + rl_insert (1, c); + break; + } + (*rl_redisplay_function) (); + } + + dosearch: + /* If rl_point == 0, we want to re-use the previous search string and + start from the saved history position. If there's no previous search + string, punt. */ + if (rl_point == 0) + { + if (!noninc_search_string) + { + ding (); + SEARCH_RETURN; + } + } + else + { + /* We want to start the search from the current history position. */ + noninc_history_pos = where_history (); + if (noninc_search_string) + free (noninc_search_string); + noninc_search_string = savestring (rl_line_buffer); + } + + _rl_restore_prompt (); + noninc_dosearch (noninc_search_string, dir); +} + +/* Search forward through the history list for a string. If the vi-mode + code calls this, KEY will be `?'. */ +int +rl_noninc_forward_search (count, key) + int count, key; +{ + noninc_search (1, (key == '?') ? '?' : 0); + return 0; +} + +/* Reverse search the history list for a string. If the vi-mode code + calls this, KEY will be `/'. */ +int +rl_noninc_reverse_search (count, key) + int count, key; +{ + noninc_search (-1, (key == '/') ? '/' : 0); + return 0; +} + +/* Search forward through the history list for the last string searched + for. If there is no saved search string, abort. */ +int +rl_noninc_forward_search_again (count, key) + int count, key; +{ + if (!noninc_search_string) + { + ding (); + return (-1); + } + noninc_dosearch (noninc_search_string, 1); + return 0; +} + +/* Reverse search in the history list for the last string searched + for. If there is no saved search string, abort. */ +int +rl_noninc_reverse_search_again (count, key) + int count, key; +{ + if (!noninc_search_string) + { + ding (); + return (-1); + } + noninc_dosearch (noninc_search_string, -1); + return 0; +} + +static int +rl_history_search_internal (count, direction) + int count, direction; +{ + HIST_ENTRY *temp, *old_temp; + int line_len; + + maybe_save_line (); + + temp = old_temp = (HIST_ENTRY *)NULL; + while (count) + { + temp = (direction < 0) ? previous_history () : next_history (); + if (temp == 0) + break; + /* On an empty prefix, make this the same as previous-history. */ + if (rl_point == 0) + { + count--; + continue; + } + if (STREQN (rl_line_buffer, temp->line, rl_point)) + { + /* Don't find multiple instances of the same line. */ + if (prev_line_found && STREQ (prev_line_found, temp->line)) + continue; + if (direction < 0) + old_temp = temp; + prev_line_found = temp->line; + count--; + } + } + + if (temp == 0) + { + if (direction < 0 && old_temp) + temp = old_temp; + else + { + maybe_unsave_line (); + ding (); + return 1; + } + } + + line_len = strlen (temp->line); + if (line_len >= rl_line_buffer_len) + rl_extend_line_buffer (line_len); + strcpy (rl_line_buffer, temp->line); + rl_undo_list = (UNDO_LIST *)temp->data; + rl_end = line_len; + return 0; +} + +/* Search forward in the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. */ +int +rl_history_search_forward (count, ignore) + int count, ignore; +{ + if (count == 0) + return (0); + if (rl_last_func != rl_history_search_forward) + prev_line_found = (char *)NULL; + return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1)); +} + +/* Search backward through the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. */ +int +rl_history_search_backward (count, ignore) + int count, ignore; +{ + if (count == 0) + return (0); + if (rl_last_func != rl_history_search_backward) + prev_line_found = (char *)NULL; + return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1)); +} diff --git a/readline/shell.c b/readline/shell.c new file mode 100644 index 00000000000..8bc2fe9b4f9 --- /dev/null +++ b/readline/shell.c @@ -0,0 +1,140 @@ +/* shell.c -- readline utility functions that are normally provided by + bash when readline is linked as part of the shell. */ + +/* Copyright (C) 1997 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include <sys/types.h> +# endif +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_STRING_H) +# include <string.h> +#else +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +extern char *xmalloc (), *xrealloc (); + +#if !defined (SHELL) + +#ifdef savestring +#undef savestring +#endif + +/* Backwards compatibility, now that savestring has been removed from + all `public' readline header files. */ +#if 0 +char * +savestring (s) + char *s; +{ + return ((char *)strcpy (xmalloc (1 + (int)strlen (s)), (s))); +} +#endif + +/* Does shell-like quoting using single quotes. */ +char * +single_quote (string) + char *string; +{ + register int c; + char *result, *r, *s; + + result = (char *)xmalloc (3 + (3 * strlen (string))); + r = result; + *r++ = '\''; + + for (s = string; s && (c = *s); s++) + { + *r++ = c; + + if (c == '\'') + { + *r++ = '\\'; /* insert escaped single quote */ + *r++ = '\''; + *r++ = '\''; /* start new quoted string */ + } + } + + *r++ = '\''; + *r = '\0'; + + return (result); +} + +/* Set the environment variables LINES and COLUMNS to lines and cols, + respectively. */ +void +set_lines_and_columns (lines, cols) + int lines, cols; +{ + char *b; + +#if defined (HAVE_PUTENV) + b = xmalloc (24); + sprintf (b, "LINES=%d", lines); + putenv (b); + b = xmalloc (24); + sprintf (b, "COLUMNS=%d", cols); + putenv (b); +#else /* !HAVE_PUTENV */ +# if defined (HAVE_SETENV) + b = xmalloc (8); + sprintf (b, "%d", lines); + setenv ("LINES", b, 1); + b = xmalloc (8); + sprintf (b, "%d", cols); + setenv ("COLUMNS", b, 1); +# endif /* HAVE_SETENV */ +#endif /* !HAVE_PUTENV */ +} + +char * +get_env_value (varname) + char *varname; +{ + return ((char *)getenv (varname)); +} + +#else /* SHELL */ +extern char *get_string_value (); + +char * +get_env_value (varname) + char *varname; +{ + return get_string_value (varname); +} +#endif /* SHELL */ diff --git a/readline/signals.c b/readline/signals.c new file mode 100644 index 00000000000..e19c22d3641 --- /dev/null +++ b/readline/signals.c @@ -0,0 +1,363 @@ +/* signals.c -- signal handling support for readline. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <stdio.h> /* Just for NULL. Yuck. */ +#include <sys/types.h> +#include <signal.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#if defined (GWINSZ_IN_SYS_IOCTL) +# include <sys/ioctl.h> +#endif /* GWINSZ_IN_SYS_IOCTL */ + +#if defined (__GO32__) +# undef HANDLE_SIGNALS +#endif /* __GO32__ */ + +#if defined (HANDLE_SIGNALS) +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +extern int readline_echoing_p; +extern int rl_pending_input; +extern int _rl_meta_flag; + +extern void free_undo_list (); +extern void _rl_get_screen_size (); +extern void _rl_redisplay_after_sigwinch (); +extern void _rl_clean_up_for_exit (); +extern void _rl_kill_kbd_macro (); +extern void _rl_init_argument (); +extern void rl_deprep_terminal (), rl_prep_terminal (); + +#if !defined (RETSIGTYPE) +# if defined (VOID_SIGHANDLER) +# define RETSIGTYPE void +# else +# define RETSIGTYPE int +# endif /* !VOID_SIGHANDLER */ +#endif /* !RETSIGTYPE */ + +#if defined (VOID_SIGHANDLER) +# define SIGHANDLER_RETURN return +#else +# define SIGHANDLER_RETURN return (0) +#endif + +/* This typedef is equivalant to the one for Function; it allows us + to say SigHandler *foo = signal (SIGKILL, SIG_IGN); */ +typedef RETSIGTYPE SigHandler (); + +static SigHandler *rl_set_sighandler (); + +/* **************************************************************** */ +/* */ +/* Signal Handling */ +/* */ +/* **************************************************************** */ + +/* If we're not being compiled as part of bash, initialize handlers for + and catch the job control signals (SIGTTIN, SIGTTOU, SIGTSTP) and + SIGTERM. */ +#if !defined (SHELL) +# define HANDLE_JOB_SIGNALS +# define HANDLE_SIGTERM +#endif /* !SHELL */ + +#if defined (HAVE_POSIX_SIGNALS) +typedef struct sigaction sighandler_cxt; +# define rl_sigaction(s, nh, oh) sigaction(s, nh, oh) +#else +typedef struct { SigHandler *sa_handler; } sighandler_cxt; +# define sigemptyset(m) +#endif /* !HAVE_POSIX_SIGNALS */ + +static sighandler_cxt old_int, old_alrm; + +#if defined (HANDLE_JOB_SIGNALS) +static sighandler_cxt old_tstp, old_ttou, old_ttin; +#endif /* HANDLE_JOB_SIGNALS */ + +#if defined (HANDLE_SIGTERM) +static sighandler_cxt old_term; +#endif + +#if defined (SIGWINCH) +static sighandler_cxt old_winch; +#endif + +/* Readline signal handler functions. */ + +static RETSIGTYPE +rl_signal_handler (sig) + int sig; +{ +#if defined (HAVE_POSIX_SIGNALS) + sigset_t set; +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + long omask; +# else /* !HAVE_BSD_SIGNALS */ + sighandler_cxt dummy_cxt; /* needed for rl_set_sighandler call */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +#if !defined (HAVE_BSD_SIGNALS) && !defined (HAVE_POSIX_SIGNALS) + /* Since the signal will not be blocked while we are in the signal + handler, ignore it until rl_clear_signals resets the catcher. */ + if (sig == SIGINT || sig == SIGALRM) + rl_set_sighandler (sig, SIG_IGN, &dummy_cxt); +#endif /* !HAVE_BSD_SIGNALS && !HAVE_POSIX_SIGNALS */ + + switch (sig) + { + case SIGINT: + { + register HIST_ENTRY *entry; + + free_undo_list (); + + entry = current_history (); + if (entry) + entry->data = (char *)NULL; + } + _rl_kill_kbd_macro (); + rl_clear_message (); + _rl_init_argument (); + +#if defined (SIGTSTP) + case SIGTSTP: + case SIGTTOU: + case SIGTTIN: +#endif /* SIGTSTP */ + case SIGALRM: + case SIGTERM: + _rl_clean_up_for_exit (); + (*rl_deprep_term_function) (); + rl_clear_signals (); + rl_pending_input = 0; + +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set); + sigdelset (&set, sig); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + omask = sigblock (0); +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + + kill (getpid (), sig); + + /* Let the signal that we just sent through. */ +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_SETMASK, &set, (sigset_t *)NULL); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + sigsetmask (omask & ~(sigmask (sig))); +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + + (*rl_prep_term_function) (_rl_meta_flag); + rl_set_signals (); + } + + SIGHANDLER_RETURN; +} + +#if defined (SIGWINCH) +static RETSIGTYPE +rl_handle_sigwinch (sig) + int sig; +{ + SigHandler *oh; + +#if defined (MUST_REINSTALL_SIGHANDLERS) + sighandler_cxt dummy_winch; + + /* We don't want to change old_winch -- it holds the state of SIGWINCH + disposition set by the calling application. We need this state + because we call the application's SIGWINCH handler after updating + our own idea of the screen size. */ + rl_set_sighandler (SIGWINCH, rl_handle_sigwinch, &dummy_winch); +#endif + + if (readline_echoing_p) + { + _rl_get_screen_size (fileno (rl_instream), 1); + _rl_redisplay_after_sigwinch (); + } + + /* If another sigwinch handler has been installed, call it. */ + oh = (SigHandler *)old_winch.sa_handler; + if (oh && oh != (SigHandler *)SIG_IGN && oh != (SigHandler *)SIG_DFL) + (*oh) (sig); + + SIGHANDLER_RETURN; +} +#endif /* SIGWINCH */ + +/* Functions to manage signal handling. */ + +#if !defined (HAVE_POSIX_SIGNALS) +static int +rl_sigaction (sig, nh, oh) + int sig; + sighandler_cxt *nh, *oh; +{ + oh->sa_handler = signal (sig, nh->sa_handler); + return 0; +} +#endif /* !HAVE_POSIX_SIGNALS */ + +/* Set up a readline-specific signal handler, saving the old signal + information in OHANDLER. Return the old signal handler, like + signal(). */ +static SigHandler * +rl_set_sighandler (sig, handler, ohandler) + int sig; + SigHandler *handler; + sighandler_cxt *ohandler; +{ +#if defined (HAVE_POSIX_SIGNALS) + struct sigaction act; + + act.sa_handler = handler; + act.sa_flags = 0; + sigemptyset (&act.sa_mask); + sigemptyset (&ohandler->sa_mask); + sigaction (sig, &act, ohandler); +#else + ohandler->sa_handler = (SigHandler *)signal (sig, handler); +#endif /* !HAVE_POSIX_SIGNALS */ + return (ohandler->sa_handler); +} + +int +rl_set_signals () +{ + sighandler_cxt dummy; + SigHandler *oh; + +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&dummy.sa_mask); +#endif + + oh = rl_set_sighandler (SIGINT, rl_signal_handler, &old_int); + if (oh == (SigHandler *)SIG_IGN) + rl_sigaction (SIGINT, &old_int, &dummy); + + oh = rl_set_sighandler (SIGALRM, rl_signal_handler, &old_alrm); + if (oh == (SigHandler *)SIG_IGN) + rl_sigaction (SIGALRM, &old_alrm, &dummy); +#if defined (HAVE_POSIX_SIGNALS) && defined (SA_RESTART) + /* If the application using readline has already installed a signal + handler with SA_RESTART, SIGALRM will cause reads to be restarted + automatically, so readline should just get out of the way. Since + we tested for SIG_IGN above, we can just test for SIG_DFL here. */ + if (oh != (SigHandler *)SIG_DFL && (old_alrm.sa_flags & SA_RESTART)) + rl_sigaction (SIGALRM, &old_alrm, &dummy); +#endif /* HAVE_POSIX_SIGNALS */ + +#if defined (HANDLE_JOB_SIGNALS) + +#if defined (SIGTSTP) + oh = rl_set_sighandler (SIGTSTP, rl_signal_handler, &old_tstp); + if (oh == (SigHandler *)SIG_IGN) + rl_sigaction (SIGTSTP, &old_tstp, &dummy); +#else + oh = (SigHandler *)NULL; +#endif /* SIGTSTP */ + +#if defined (SIGTTOU) + rl_set_sighandler (SIGTTOU, rl_signal_handler, &old_ttou); + rl_set_sighandler (SIGTTIN, rl_signal_handler, &old_ttin); + + if (oh == (SigHandler *)SIG_IGN) + { + rl_set_sighandler (SIGTTOU, SIG_IGN, &dummy); + rl_set_sighandler (SIGTTIN, SIG_IGN, &dummy); + } +#endif /* SIGTTOU */ + +#endif /* HANDLE_JOB_SIGNALS */ + +#if defined (HANDLE_SIGTERM) + /* Handle SIGTERM if we're not being compiled as part of bash. */ + rl_set_sighandler (SIGTERM, rl_signal_handler, &old_term); +#endif /* HANDLE_SIGTERM */ + +#if defined (SIGWINCH) + rl_set_sighandler (SIGWINCH, rl_handle_sigwinch, &old_winch); +#endif /* SIGWINCH */ + + return 0; +} + +int +rl_clear_signals () +{ + sighandler_cxt dummy; + +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&dummy.sa_mask); +#endif + + rl_sigaction (SIGINT, &old_int, &dummy); + rl_sigaction (SIGALRM, &old_alrm, &dummy); + +#if defined (HANDLE_JOB_SIGNALS) + +#if defined (SIGTSTP) + rl_sigaction (SIGTSTP, &old_tstp, &dummy); +#endif + +#if defined (SIGTTOU) + rl_sigaction (SIGTTOU, &old_ttou, &dummy); + rl_sigaction (SIGTTIN, &old_ttin, &dummy); +#endif /* SIGTTOU */ + +#endif /* HANDLE_JOB_SIGNALS */ + +#if defined (HANDLE_SIGTERM) + rl_sigaction (SIGTERM, &old_term, &dummy); +#endif /* HANDLE_SIGTERM */ + +#if defined (SIGWINCH) + sigemptyset (&dummy.sa_mask); + rl_sigaction (SIGWINCH, &old_winch, &dummy); +#endif + + return 0; +} +#endif /* HANDLE_SIGNALS */ diff --git a/readline/support/config.guess b/readline/support/config.guess new file mode 100755 index 00000000000..0e11ad86e3a --- /dev/null +++ b/readline/support/config.guess @@ -0,0 +1,1130 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996 Free Software Foundation, Inc. +# +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Written by Per Bothner <bothner@cygnus.com>. +# The master version of this file is at the FSF in /home/gd/gnu/lib. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit system type (host/target name). +# +# Only a few systems have been added to this list; please add others +# (but try to keep the structure clean). +# + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 8/24/94.) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +elif (test -f /usr/5bin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/usr/5bin +fi + +UNAME=`(uname) 2>/dev/null` || UNAME=unknown +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +RELEASE=`expr "$UNAME_RELEASE" : '[^0-9]*\([0-9]*\)'` # 4 +case "$RELEASE" in +"") RELEASE=0 ;; +*) RELEASE=`expr "$RELEASE" + 0` ;; +esac +REL_LEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.\([0-9]*\)'` # 1 +REL_SUBLEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.[0-9]*.\([0-9]*\)'` # 2 + +trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 + +# Some versions of i386 SVR4.2 make `uname' equivalent to `uname -n', which +# is contrary to all other versions of uname +if [ -n "$UNAME" ] && [ "$UNAME_S" != "$UNAME" ] && [ "$UNAME_S" = UNIX_SV ]; then + UNAME=UNIX_SV +fi + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + # Begin cases added for Bash + alpha:NetBSD:*:*) + echo alpha-dec-netbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OpenBSD:*:*) + echo alpha-dec-openbsd${UNAME_RELEASE} + exit 0 ;; + i?86:NetBSD:*:*) + echo ${UNAME_MACHINE}-pc-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i?86:OpenBSD:*:*) + echo ${UNAME_MACHINE}-pc-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i?86:FreeBSD:*:*) + echo ${UNAME_MACHINE}-pc-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + sparc:NetBSD:*:*) + echo sparc-unknown-netbsd${UNAME_RELEASE} + exit 0 ;; + sparc:OpenBSD:*:*) + echo sparc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + vax:NetBSD:*:*) + echo vax-dec-netbsd${UNAME_RELEASE} + exit 0 ;; + vax:OpenBSD:*:*) + echo vax-dec-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:machten:*:*) + echo mac68k-apple-machten${UNAME_RELEASE} + exit 0 ;; + concurrent*:*:*:*) + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo concurrent-concurrent-sysv3 + else + echo concurrent-concurrent-bsd + fi + exit 0 ;; + ppc*:SunOS:5.*:*) + echo ppc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sparc:UNIX_SV:4.*:*) + echo sparc-unknown-sysv${UNAME_RELEASE} + exit 0 ;; + mips:UNIX_SV:4.*:*) + echo mips-mips-sysv${UNAME_RELEASE} + exit 0 ;; + mips:OSF*1:*:*) + echo mips-mips-osf1 + exit 0 ;; + mips:4.4BSD:*:*) + echo mips-mips-bsd4.4 + exit 0 ;; + MIServer-S:SMP_DC.OSx:*:dcosx) + echo mips-pyramid-sysv4 + exit 0 ;; + news*:NEWS*:*:*) + echo mips-sony-newsos${UNAME_RELEASE} + exit 0 ;; + i?86:NEXTSTEP:*:*) + echo i386-next-nextstep${RELEASE} + exit 0 ;; + *680?0:NEXTSTEP:*:*) + echo m68k-next-nextstep${RELEASE} + exit 0 ;; + *370:AIX:*:*) + echo ibm370-ibm-aix + exit 0 ;; + ksr1:OSF*1:*:*) + echo ksr1-ksr-osf1 + exit 0 ;; + esa:OSF*1:*:* | ESA:OSF*:*:*) + echo esa-ibm-osf1 + exit 0 ;; + DNP*:DNIX:*:*) + echo m68k-dnix-sysv + exit 0 ;; + *3b2*:*:*:*) + echo we32k-att-sysv3 + exit 0 ;; + *:QNX:*:42*) + echo i386-qssl-qnx`echo ${UNAME_VERSION}` + exit 0 ;; + # end cases added for Bash + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + cat <<EOF >dummy.s + .globl main + .ent main +main: + .frame \$30,0,\$26,0 + .prologue 0 + .long 0x47e03d80 # implver $0 + lda \$2,259 + .long 0x47e20c21 # amask $2,$1 + srl \$1,8,\$2 + sll \$2,2,\$2 + sll \$0,3,\$0 + addl \$1,\$0,\$0 + addl \$2,\$0,\$0 + ret \$31,(\$26),1 + .end main +EOF + ${CC-cc} dummy.s -o dummy 2>/dev/null + if test "$?" = 0 ; then + ./dummy + case "$?" in + 7) + UNAME_MACHINE="alpha" + ;; + 15) + UNAME_MACHINE="alphaev5" + ;; + 14) + UNAME_MACHINE="alphaev56" + ;; + 10) + UNAME_MACHINE="alphapca56" + ;; + 16) + UNAME_MACHINE="alphaev6" + ;; + esac + fi + rm -f dummy.s dummy + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]` + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-cbm-sysv4 + exit 0;; + amiga:NetBSD:*:*) + echo m68k-cbm-netbsd${UNAME_RELEASE} + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-cbm-openbsd${UNAME_RELEASE} + exit 0 ;; + arc64:OpenBSD:*:*) + echo mips64el-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hkmips:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + arm32:NetBSD:*:*) + echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + SR2?01:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*|sun:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + atari*:NetBSD:*:*) + echo m68k-atari-netbsd${UNAME_RELEASE} + exit 0 ;; + atari*:OpenBSD:*:*) + echo m68k-atari-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3*:NetBSD:*:*) + echo m68k-sun-netbsd${UNAME_RELEASE} + exit 0 ;; + sun3*:OpenBSD:*:*) + echo m68k-sun-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:NetBSD:*:*) + echo m68k-apple-netbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-apple-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + Power?Macintosh:Rhapsody:*:*) + echo powerpc-apple-nextstep${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-unknown-nextstep${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + sed 's/^ //' << EOF >dummy.c + int main (argc, argv) int argc; char **argv; { + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + ${CC-cc} dummy.c -o dummy \ + && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm dummy.c dummy && exit 0 + rm -f dummy.c dummy + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ + -o ${TARGET_BINARY_INTERFACE}x = x ] ; then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i?86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + sed 's/^ //' << EOF >dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 + rm -f dummy.c dummy + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:4) + if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + elif grep bos410 /usr/include/stdio.h >/dev/null 2>&1; then + IBM_REV=4.1 + elif grep bos411 /usr/include/stdio.h >/dev/null 2>&1; then + IBM_REV=4.1.1 + else + IBM_REV=4.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/78? | 9000/80[24] | 9000/8[67]1 | 9000/8[78]9 | 9000/893 ) + HP_ARCH=hppa2.0 ;; + 9000/7?? | 9000/8?[13679] | 9000/892 ) + HP_ARCH=hppa1.1 ;; + 9000/[68]?? ) HP_ARCH=hppa1.0 ;; + esac + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + sed 's/^ //' << EOF >dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 + rm -f dummy.c dummy + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i?86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-pc-osf1mk + else + echo ${UNAME_MACHINE}-pc-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*X-MP:*:*:*) + echo xmp-cray-unicos + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} + exit 0 ;; + CRAY-2:*:*:*) + echo cray2-cray-unicos + exit 0 ;; + F300:UNIX_System_V:*:*) + FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + F301:UNIX_System_V:*:*) + echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` + exit 0 ;; + hp3[0-9][05]:NetBSD:*:*) + echo m68k-hp-netbsd${UNAME_RELEASE} + exit 0 ;; + hp3[0-9][05]:OpenBSD:*:*) + echo m68k-hp-openbsd${UNAME_RELEASE} + exit 0 ;; + i?86:BSD/386:*:* | *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:NetBSD:*:*) + echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + exit 0 ;; + i*:CYGWIN*:*) + echo i386-pc-cygwin32 + exit 0 ;; + i*:MINGW*:*) + echo i386-pc-mingw32 + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin32 + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + *:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. + ld_help_string=`ld --help 2>&1` + ld_supported_emulations=`echo $ld_help_string \ + | sed -ne '/supported emulations:/!d + s/[ ][ ]*/ /g + s/.*supported emulations: *// + s/ .*// + p'` + case "$ld_supported_emulations" in + i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;; + i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;; + sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; + m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;; + elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;; + esac + + if test "${UNAME_MACHINE}" = "alpha" ; then + sed 's/^ //' <<EOF >dummy.s + .globl main + .ent main + main: + .frame \$30,0,\$26,0 + .prologue 0 + .long 0x47e03d80 # implver $0 + lda \$2,259 + .long 0x47e20c21 # amask $2,$1 + srl \$1,8,\$2 + sll \$2,2,\$2 + sll \$0,3,\$0 + addl \$1,\$0,\$0 + addl \$2,\$0,\$0 + ret \$31,(\$26),1 + .end main +EOF + LIBC="" + ${CC-cc} dummy.s -o dummy 2>/dev/null + if test "$?" = 0 ; then + ./dummy + case "$?" in + 7) + UNAME_MACHINE="alpha" + ;; + 15) + UNAME_MACHINE="alphaev5" + ;; + 14) + UNAME_MACHINE="alphaev56" + ;; + 10) + UNAME_MACHINE="alphapca56" + ;; + 16) + UNAME_MACHINE="alphaev6" + ;; + esac + + objdump --private-headers dummy | \ + grep ld.so.1 > /dev/null + if test "$?" = 0 ; then + LIBC="libc1" + fi + fi + rm -f dummy.s dummy + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 + elif test "${UNAME_MACHINE}" = "mips" ; then + cat >dummy.c <<EOF +main(argc, argv) + int argc; + char *argv[]; +{ +#ifdef __MIPSEB__ + printf ("%s-unknown-linux-gnu\n", argv[1]); +#endif +#ifdef __MIPSEL__ + printf ("%sel-unknown-linux-gnu\n", argv[1]); +#endif + return 0; +} +EOF + ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 + rm -f dummy.c dummy + else + # Either a pre-BFD a.out linker (linux-gnuoldld) + # or one that does not give us useful --help. + # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. + # If ld does not provide *any* "supported emulations:" + # that means it is gnuoldld. + echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" + test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 + + case "${UNAME_MACHINE}" in + i?86) + VENDOR=pc; + ;; + *) + VENDOR=unknown; + ;; + esac + # Determine whether the default compiler is a.out or elf + cat >dummy.c <<EOF +#include <features.h> +main(argc, argv) + int argc; + char *argv[]; +{ +#ifdef __ELF__ +# ifdef __GLIBC__ +# if __GLIBC__ >= 2 + printf ("%s-${VENDOR}-linux-gnu\n", argv[1]); +# else + printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +# endif +# else + printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]); +# endif +#else + printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]); +#endif + return 0; +} +EOF + ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 + rm -f dummy.c dummy + fi ;; +# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions +# are messed up and put the nodename in both sysname and nodename. + i?86:DYNIX/ptx:4*:*) + echo i386-sequent-sysv4 + exit 0 ;; + i?86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i?86:*:4.*:* | i?86:SYSTEM_V:4.*:* | i?86:UNIX_SV:4.*:*) + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} + fi + exit 0 ;; + i?86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` + (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + pc:*:*:*) + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + m68*:LynxOS:2.*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i?86:LynxOS:2.*:*) + echo i386-pc-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + *:LynxOS:*:*) + echo ${UNAME_MACHINE}-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:SINIX-*:*:* | RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes@openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:*:6*) + echo mips-sony-newsos6 + exit 0 ;; + R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +cat >dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp9000) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +#if !defined (ultrix) + printf ("vax-dec-bsd\n"); exit (0); +#else + printf ("vax-dec-ultrix\n"); exit (0); +#endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + +/* Begin cases added for Bash */ +#if defined (tahoe) + printf ("tahoe-cci-bsd\n"); exit (0); +#endif + +#if defined (nec_ews) +# if defined (SYSTYPE_SYSV) + printf ("ews4800-nec-sysv4\n"); exit 0; +# else + printf ("ews4800-nec-bsd\n"); exit (0); +# endif +#endif + +#if defined (sony) +# if defined (SYSTYPE_SYSV) + printf ("mips-sony-sysv4\n"); exit 0; +# else + printf ("mips-sony-bsd\n"); exit (0); +# endif +#endif + +#if defined (ardent) + printf ("titan-ardent-bsd\n"); exit (0); +#endif + +#if defined (stardent) + printf ("stardent-stardent-sysv\n"); exit (0); +#endif + +#if defined (ibm032) + printf ("ibmrt-ibm-bsd4.3\n"); exit (0); +#endif + +#if defined (sequent) && defined (i386) + printf ("i386-sequent-bsd\n"); exit (0); +#endif + +#if defined (qnx) && defined (i386) + printf ("i386-pc-qnx\n"); exit (0); +#endif + +#if defined (gould) + printf ("gould-gould-bsd\n"); exit (0); +#endif + +#if defined (unixpc) + printf ("unixpc-att-sysv\n"); exit (0); +#endif + +#if defined (att386) + printf ("i386-att-sysv3\n"); exit (0); +#endif + +#if defined (__m88k) && defined (__UMAXV__) + printf ("m88k-encore-sysv3\n"); exit (0); +#endif + +#if defined (drs6000) + printf ("drs6000-icl-sysv4.2\n"); exit (0); +#endif + +#if defined (clipper) + printf ("clipper-orion-bsd\n"); exit (0); +#endif + +#if defined (is68k) + printf ("m68k-isi-bsd\n"); exit (0); +#endif + +#if defined (luna88k) + printf ("luna88k-omron-bsd\n"); exit (0); +#endif + +#if defined (butterfly) && defined (BFLY1) + printf ("butterfly-bbn-mach\n"); exit (0); +#endif + +#if defined (tower32) + printf ("tower32-ncr-sysv4\n"); exit (0); +#endif + +#if defined (MagicStation) + printf ("magicstation-unknown-bsd\n"); exit (0); +#endif + +#if defined (scs) + printf ("symmetric-scs-bsd4.2\n"); exit (0); +#endif + +#if defined (tandem) + printf ("tandem-tandem-sysv\n"); exit (0); +#endif + +#if defined (cadmus) + printf ("cadmus-pcs-sysv\n"); exit (0); +#endif + +#if defined (masscomp) + printf ("masscomp-masscomp-sysv3\n"); exit (0); +#endif + +#if defined (hbullx20) + printf ("hbullx20-bull-sysv3\n"); exit (0); +#endif + +/* End cases added for Bash */ + + exit (1); +} +EOF + +${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 +rm -f dummy.c dummy + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +# Begin cases added for Bash +case "$UNAME" in +uts) echo uts-amdahl-sysv${UNAME_RELEASE}; exit 0 ;; +esac + +if [ -d /usr/amiga ]; then + echo m68k-cbm-sysv${UNAME_RELEASE}; exit 0; +fi + +if [ -f /bin/fxc.info ]; then + echo fxc-alliant-concentrix + exit 0 +fi +# end cases added for Bash + +#echo '(Unable to guess system type)' 1>&2 + +exit 1 diff --git a/readline/support/config.sub b/readline/support/config.sub new file mode 100755 index 00000000000..7541a125fa6 --- /dev/null +++ b/readline/support/config.sub @@ -0,0 +1,945 @@ +#! /bin/sh +# Configuration validation subroutine script, version 1.1. +# Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc. +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +if [ x$1 = x ] +then + echo Configuration name missing. 1>&2 + echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 + echo "or $0 ALIAS" 1>&2 + echo where ALIAS is a recognized configuration type. 1>&2 + exit 1 +fi + +# First pass through any local machine types. +case $1 in + *local*) + echo $1 + exit 0 + ;; + *) + ;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + linux-gnu*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple) + os= + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \ + | arme[lb] | pyramid \ + | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ + | hppa2.0 | alpha | we32k | ns16k | clipper | i370 | sh \ + | powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \ + | pdp11 | mips64el | mips64orion | mips64orionel \ + | sparc | sparclet | sparclite | sparc64) + basic_machine=$basic_machine-unknown + ;; + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i[3456]86) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \ + | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \ + | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \ + | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \ + | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \ + | alpha-* | we32k-* | cydra-* | ns16k-* \ + | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \ + | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \ + | mips64el-* | mips64orion-* | mips64orionel-* | f301-* \ + | butterfly-bbn* \ + | cadmus-* | ews*-nec | ibmrt-ibm* | masscomp-masscomp \ + | tandem-* | symmetric-* | drs6000-icl | *-*ardent | gould-gould \ + | concurrent-* | ksr1-* | esa-ibm | fxc-alliant | *370-amdahl \ + | *-convex) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-cbm + ;; + amigados) + basic_machine=m68k-cbm + os=-amigados + ;; + amigaunix | amix) + basic_machine=m68k-cbm + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | ymp) + basic_machine=ymp-cray + os=-unicos + ;; + cray2) + basic_machine=cray2-cray + os=-unicos + ;; + [ctj]90-cray) + basic_machine=c90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + hbullx20-bull) + basic_machine=m68k-bull + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax | multimax) + basic_machine=ns32k-encore + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + ibm032-*) + basic_machine=ibmrt-ibm + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + os=-mvs + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i[3456]86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i[3456]86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i[3456]86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i[3456]86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + luna88k-omron* | m88k-omron*) + basic_machine=m88k-omron + ;; + magicstation*) + basic_machine=magicstation-unknown + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + miniframe) + basic_machine=m68000-convergent + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + np1) + basic_machine=np1-gould + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5) + basic_machine=i586-intel + ;; + pentiumpro | p6) + basic_machine=i686-intel + ;; + pentium-* | p5-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + k5) + # We don't have specific support for AMD's K5 yet, so just call it a Pentium + basic_machine=i586-amd + ;; + nexen) + # We don't have specific support for Nexgen yet, so just call it a Pentium + basic_machine=i586-nexgen + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=rs6000-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + xmp) + basic_machine=xmp-cray + os=-unicos + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + mips) + basic_machine=mips-mips + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sparc) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -unixware* | svr4*) + os=-sysv4 + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -linux-gnu* | -uxpv* | -qnx* | -powerux) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -ctix* | -uts*) + os=-sysv + ;; + -ns2 ) + os=-nextstep2 + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -xenix) + os=-xenix + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-semi) + os=-aout + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-ibm) + os=-aix + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigados + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f301-fujitsu) + os=-uxpv + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -lynxos*) + vendor=lynx + ;; + -aix*) + vendor=ibm + ;; + -hpux*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os diff --git a/readline/support/install.sh b/readline/support/install.sh new file mode 100755 index 00000000000..ea88212bb50 --- /dev/null +++ b/readline/support/install.sh @@ -0,0 +1,235 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5. +# +# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +tranformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 diff --git a/readline/support/mkdirs b/readline/support/mkdirs new file mode 100755 index 00000000000..b79d9716f46 --- /dev/null +++ b/readline/support/mkdirs @@ -0,0 +1,32 @@ +#! /bin/sh +# +# mkdirs - a work-alike for `mkdir -p' +# +# Chet Ramey +# chet@po.cwru.edu + +for dir +do + + test -d "$dir" && continue + + tomake=$dir + while test -n "$dir" ; do + # dir=${dir%/*} + # dir=`expr "$dir" ':' '\(/.*\)/[^/]*'` + if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then + tomake="$dir $tomake" + else + dir= + fi + done + + for d in $tomake + do + test -d "$d" && continue + echo mkdir "$d" + mkdir "$d" + done +done + +exit 0 diff --git a/readline/support/mkdist b/readline/support/mkdist new file mode 100755 index 00000000000..0d3d6940599 --- /dev/null +++ b/readline/support/mkdist @@ -0,0 +1,100 @@ +#! /bin/bash - +# +# mkdist - make a distribution directory from a master manifest file +# +# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version +# +# SRCDIR defaults to src +# MANIFEST defaults to $SRCDIR/MANIFEST +# + +SRCDIR=src +ROOTNAME=bash + +usage() +{ + echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version 1>&2 + exit 2 +} + +vmsg() +{ + if [ -n "$verbose" ]; then + echo mkdist: "$@" + fi +} + +while getopts m:s:r:v name +do + case $name in + m) MANIFEST=$OPTARG ;; + s) SRCDIR=$OPTARG ;; + r) ROOTNAME=$OPTARG ;; + v) verbose=yes ;; + ?) usage ;; + esac +done + +: ${MANIFEST:=$SRCDIR/MANIFEST} + +vmsg using $MANIFEST + +shift $(( $OPTIND - 1 )) + +if [ $# -lt 1 ]; then + usage +fi + +version=$1 +newdir=${ROOTNAME}-$version + +vmsg creating distribution for version $version in $newdir + +if [ ! -d $newdir ]; then + mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; } +fi + +dirmode=755 +filmode=644 + +while read fname type mode +do + [ -z "$fname" ] && continue + + case "$fname" in + \#*) continue ;; + esac + + case "$type" in + d) mkdir $newdir/$fname ;; + f) cp -p $SRCDIR/$fname $newdir/$fname ;; + *) echo "unknown file type $type" 1>&2 ;; + esac + + if [ -n "$mode" ]; then + chmod $mode $newdir/$fname + fi + +done < $MANIFEST + +# cut off the `-alpha' in something like `2.0-alpha', leaving just the +# numeric version +#version=${version%%-*} + +#case "$version" in +#*.*.*) vers=${version%.*} ;; +#*.*) vers=${version} ;; +#esac + +#echo $vers > $newdir/.distribution + +#case "$version" in +#*.*.*) plevel=${version##*.} ;; +#*) plevel=0 ;; +#esac +#[ -z "$plevel" ] && plevel=0 +#echo ${plevel} > $newdir/.patchlevel + +vmsg $newdir created + +exit 0 diff --git a/readline/tcap.h b/readline/tcap.h new file mode 100644 index 00000000000..acb2d76ab48 --- /dev/null +++ b/readline/tcap.h @@ -0,0 +1,60 @@ +/* tcap.h -- termcap library functions and variables. */ + +/* Copyright (C) 1996 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_RLTCAP_H_) +#define _RLTCAP_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +#if defined (HAVE_TERMCAP_H) +# if defined (__linux__) && !defined (SPEED_T_IN_SYS_TYPES) +# include "rltty.h" +# endif +# include <termcap.h> +#else + +/* On Solaris2, sys/types.h #includes sys/reg.h, which #defines PC. + Unfortunately, PC is a global variable used by the termcap library. */ +#ifdef PC +# undef PC +#endif + +extern char PC; +extern char *UP, *BC; + +extern short ospeed; + +extern int tgetent (); +extern int tgetflag (); +extern int tgetnum (); +extern char *tgetstr (); + +extern int tputs (); + +extern char *tgoto (); + +#endif /* HAVE_TERMCAP_H */ + +#endif /* !_RLTCAP_H_ */ diff --git a/readline/terminal.c b/readline/terminal.c new file mode 100644 index 00000000000..c28669659b0 --- /dev/null +++ b/readline/terminal.c @@ -0,0 +1,545 @@ +/* terminal.c -- controlling the terminal with termcap. */ + +/* Copyright (C) 1996 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include "posixstat.h" +#include <fcntl.h> +#if defined (HAVE_SYS_FILE_H) +# include <sys/file.h> +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include <locale.h> +#endif + +#include <signal.h> +#include <stdio.h> +#include <setjmp.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) +# include <sys/ioctl.h> +#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ + +#include "rltty.h" +#include "tcap.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +/* Variables and functions imported from readline.c */ +extern FILE *_rl_in_stream, *_rl_out_stream; +extern int readline_echoing_p; +extern int _rl_bell_preference; +extern Keymap _rl_keymap; + +/* Functions imported from bind.c */ +extern void _rl_bind_if_unbound (); + +/* Functions imported from shell.c */ +extern void set_lines_and_columns (); +extern char *get_env_value (); + +/* **************************************************************** */ +/* */ +/* Terminal and Termcap */ +/* */ +/* **************************************************************** */ + +static char *term_buffer = (char *)NULL; +static char *term_string_buffer = (char *)NULL; + +static int tcap_initialized; + +/* Non-zero means this terminal can't really do anything. */ +static int dumb_term; + +#if !defined (__linux__) +# if defined (__EMX__) || defined (NEED_EXTERN_PC) +extern +# endif /* __EMX__ || NEED_EXTERN_PC */ +char PC, *BC, *UP; +#endif /* __linux__ */ + +/* Some strings to control terminal actions. These are output by tputs (). */ +char *term_goto, *term_clreol, *term_cr, *term_clrpag, *term_backspace; +char *term_pc; + +/* Non-zero if we determine that the terminal can do character insertion. */ +int terminal_can_insert = 0; + +/* How to insert characters. */ +char *term_im, *term_ei, *term_ic, *term_ip, *term_IC; + +/* How to delete characters. */ +char *term_dc, *term_DC; + +#if defined (HACK_TERMCAP_MOTION) +char *term_forward_char; +#endif /* HACK_TERMCAP_MOTION */ + +/* How to go up a line. */ +char *term_up; + +/* A visible bell, if the terminal can be made to flash the screen. */ +static char *visible_bell; + +/* Non-zero means the terminal can auto-wrap lines. */ +int _rl_term_autowrap; + +/* Non-zero means that this terminal has a meta key. */ +static int term_has_meta; + +/* The sequences to write to turn on and off the meta key, if this + terminal has one. */ +static char *term_mm, *term_mo; + +/* The key sequences output by the arrow keys, if this terminal has any. */ +static char *term_ku, *term_kd, *term_kr, *term_kl; + +/* How to initialize and reset the arrow keys, if this terminal has any. */ +static char *term_ks, *term_ke; + +/* The key sequences sent by the Home and End keys, if any. */ +static char *term_kh, *term_kH; + +/* Variables that hold the screen dimensions, used by the display code. */ +int screenwidth, screenheight, screenchars; + +/* Non-zero means the user wants to enable the keypad. */ +int _rl_enable_keypad; + +/* Non-zero means the user wants to enable a meta key. */ +int _rl_enable_meta = 1; + +/* Get readline's idea of the screen size. TTY is a file descriptor open + to the terminal. If IGNORE_ENV is true, we do not pay attention to the + values of $LINES and $COLUMNS. The tests for TERM_STRING_BUFFER being + non-null serve to check whether or not we have initialized termcap. */ +void +_rl_get_screen_size (tty, ignore_env) + int tty, ignore_env; +{ + char *ss; +#if defined (TIOCGWINSZ) + struct winsize window_size; +#endif /* TIOCGWINSZ */ +#if defined (__EMX__) + int sz[2]; +#endif + +#if defined (TIOCGWINSZ) + if (ioctl (tty, TIOCGWINSZ, &window_size) == 0) + { + screenwidth = (int) window_size.ws_col; + screenheight = (int) window_size.ws_row; + } +#endif /* TIOCGWINSZ */ + +#if defined (__EMX__) + _scrsize (sz); + screenwidth = sz[0]; + screenheight = sz[1]; +#endif + + /* Environment variable COLUMNS overrides setting of "co" if IGNORE_ENV + is unset. */ + if (screenwidth <= 0) + { + if (ignore_env == 0 && (ss = get_env_value ("COLUMNS"))) + screenwidth = atoi (ss); + + if (screenwidth <= 0 && term_string_buffer) + screenwidth = tgetnum ("co"); + } + + /* Environment variable LINES overrides setting of "li" if IGNORE_ENV + is unset. */ + if (screenheight <= 0) + { + if (ignore_env == 0 && (ss = get_env_value ("LINES"))) + screenheight = atoi (ss); + + if (screenheight <= 0 && term_string_buffer) + screenheight = tgetnum ("li"); + } + + /* If all else fails, default to 80x24 terminal. */ + if (screenwidth <= 1) + screenwidth = 80; + + if (screenheight <= 0) + screenheight = 24; + + /* If we're being compiled as part of bash, set the environment + variables $LINES and $COLUMNS to new values. Otherwise, just + do a pair of putenv () or setenv () calls. */ + set_lines_and_columns (screenheight, screenwidth); + + if (!_rl_term_autowrap) + screenwidth--; + + screenchars = screenwidth * screenheight; +} + +void +_rl_set_screen_size (rows, cols) + int rows, cols; +{ + screenheight = rows; + screenwidth = cols; + + if (_rl_term_autowrap == 0) + screenwidth--; + + screenchars = screenwidth * screenheight; +} + +struct _tc_string { + char *tc_var; + char **tc_value; +}; + +/* This should be kept sorted, just in case we decide to change the + search algorithm to something smarter. */ +static struct _tc_string tc_strings[] = +{ + "DC", &term_DC, + "IC", &term_IC, + "ce", &term_clreol, + "cl", &term_clrpag, + "cr", &term_cr, + "dc", &term_dc, + "ei", &term_ei, + "ic", &term_ic, + "im", &term_im, + "kd", &term_kd, + "kh", &term_kh, /* home */ + "kH", &term_kH, /* end */ + "kl", &term_kl, + "kr", &term_kr, + "ku", &term_ku, + "ks", &term_ks, + "ke", &term_ke, + "le", &term_backspace, + "mm", &term_mm, + "mo", &term_mo, +#if defined (HACK_TERMCAP_MOTION) + "nd", &term_forward_char, +#endif + "pc", &term_pc, + "up", &term_up, + "vb", &visible_bell, +}; + +#define NUM_TC_STRINGS (sizeof (tc_strings) / sizeof (struct _tc_string)) + +/* Read the desired terminal capability strings into BP. The capabilities + are described in the TC_STRINGS table. */ +static void +get_term_capabilities (bp) + char **bp; +{ + register int i; + + for (i = 0; i < NUM_TC_STRINGS; i++) + *(tc_strings[i].tc_value) = tgetstr (tc_strings[i].tc_var, bp); + tcap_initialized = 1; +} + +int +_rl_init_terminal_io (terminal_name) + char *terminal_name; +{ +#if defined (__GO32__) + screenwidth = ScreenCols (); + screenheight = ScreenRows (); + screenchars = screenwidth * screenheight; + term_cr = "\r"; + term_im = term_ei = term_ic = term_IC = (char *)NULL; + term_up = term_dc = term_DC = visible_bell = (char *)NULL; + + /* Does the __GO32__ have a meta key? I don't know. */ + term_has_meta = 0; + term_mm = term_mo = (char *)NULL; + + /* It probably has arrow keys, but I don't know what they are. */ + term_ku = term_kd = term_kr = term_kl = (char *)NULL; + +#if defined (HACK_TERMCAP_MOTION) + term_forward_char = (char *)NULL; +#endif /* HACK_TERMCAP_MOTION */ + terminal_can_insert = _rl_term_autowrap = 0; + return; +#else /* !__GO32__ */ + + char *term, *buffer; + int tty; + Keymap xkeymap; + + term = terminal_name ? terminal_name : get_env_value ("TERM"); + + if (term_string_buffer == 0) + term_string_buffer = xmalloc (2032); + + if (term_buffer == 0) + term_buffer = xmalloc (4080); + + buffer = term_string_buffer; + + term_clrpag = term_cr = term_clreol = (char *)NULL; + + if (term == 0) + term = "dumb"; + + if (tgetent (term_buffer, term) <= 0) + { + dumb_term = 1; + screenwidth = 79; + screenheight = 24; + screenchars = 79 * 24; + term_cr = "\r"; + term_im = term_ei = term_ic = term_IC = (char *)NULL; + term_up = term_dc = term_DC = visible_bell = (char *)NULL; + term_ku = term_kd = term_kl = term_kr = (char *)NULL; +#if defined (HACK_TERMCAP_MOTION) + term_forward_char = (char *)NULL; +#endif + terminal_can_insert = 0; + return 0; + } + + get_term_capabilities (&buffer); + + /* Set up the variables that the termcap library expects the application + to provide. */ + PC = term_pc ? *term_pc : 0; + BC = term_backspace; + UP = term_up; + + if (!term_cr) + term_cr = "\r"; + + tty = rl_instream ? fileno (rl_instream) : 0; + + screenwidth = screenheight = 0; + + _rl_term_autowrap = tgetflag ("am") && tgetflag ("xn"); + + _rl_get_screen_size (tty, 0); + + /* "An application program can assume that the terminal can do + character insertion if *any one of* the capabilities `IC', + `im', `ic' or `ip' is provided." But we can't do anything if + only `ip' is provided, so... */ + terminal_can_insert = (term_IC || term_im || term_ic); + + /* Check to see if this terminal has a meta key and clear the capability + variables if there is none. */ + term_has_meta = (tgetflag ("km") || tgetflag ("MT")); + if (!term_has_meta) + term_mm = term_mo = (char *)NULL; + + /* Attempt to find and bind the arrow keys. Do not override already + bound keys in an overzealous attempt, however. */ + xkeymap = _rl_keymap; + + _rl_keymap = emacs_standard_keymap; + _rl_bind_if_unbound (term_ku, rl_get_previous_history); + _rl_bind_if_unbound (term_kd, rl_get_next_history); + _rl_bind_if_unbound (term_kr, rl_forward); + _rl_bind_if_unbound (term_kl, rl_backward); + + _rl_bind_if_unbound (term_kh, rl_beg_of_line); /* Home */ + _rl_bind_if_unbound (term_kH, rl_end_of_line); /* End */ + +#if defined (VI_MODE) + _rl_keymap = vi_movement_keymap; + _rl_bind_if_unbound (term_ku, rl_get_previous_history); + _rl_bind_if_unbound (term_kd, rl_get_next_history); + _rl_bind_if_unbound (term_kr, rl_forward); + _rl_bind_if_unbound (term_kl, rl_backward); + + _rl_bind_if_unbound (term_kh, rl_beg_of_line); /* Home */ + _rl_bind_if_unbound (term_kH, rl_end_of_line); /* End */ +#endif /* VI_MODE */ + + _rl_keymap = xkeymap; + +#endif /* !__GO32__ */ + return 0; +} + +char * +rl_get_termcap (cap) + char *cap; +{ + register int i; + + if (tcap_initialized == 0) + return ((char *)NULL); + for (i = 0; i < NUM_TC_STRINGS; i++) + { + if (tc_strings[i].tc_var[0] == cap[0] && strcmp (tc_strings[i].tc_var, cap) == 0) + return *(tc_strings[i].tc_value); + } + return ((char *)NULL); +} + +/* Re-initialize the terminal considering that the TERM/TERMCAP variable + has changed. */ +int +rl_reset_terminal (terminal_name) + char *terminal_name; +{ + _rl_init_terminal_io (terminal_name); + return 0; +} + +/* A function for the use of tputs () */ +#ifdef _MINIX +void +_rl_output_character_function (c) + int c; +{ + putc (c, _rl_out_stream); +} +#else /* !_MINIX */ +int +_rl_output_character_function (c) + int c; +{ + return putc (c, _rl_out_stream); +} +#endif /* !_MINIX */ +/* Write COUNT characters from STRING to the output stream. */ +void +_rl_output_some_chars (string, count) + char *string; + int count; +{ + fwrite (string, 1, count, _rl_out_stream); +} + +/* Move the cursor back. */ +int +_rl_backspace (count) + int count; +{ + register int i; + +#if !defined (__GO32__) + if (term_backspace) + for (i = 0; i < count; i++) + tputs (term_backspace, 1, _rl_output_character_function); + else +#endif /* !__GO32__ */ + for (i = 0; i < count; i++) + putc ('\b', _rl_out_stream); + return 0; +} + +/* Move to the start of the next line. */ +int +crlf () +{ +#if defined (NEW_TTY_DRIVER) + if (term_cr) + tputs (term_cr, 1, _rl_output_character_function); +#endif /* NEW_TTY_DRIVER */ + putc ('\n', _rl_out_stream); + return 0; +} + +/* Ring the terminal bell. */ +int +ding () +{ + if (readline_echoing_p) + { +#if !defined (__GO32__) + switch (_rl_bell_preference) + { + case NO_BELL: + default: + break; + case VISIBLE_BELL: + if (visible_bell) + { + tputs (visible_bell, 1, _rl_output_character_function); + break; + } + /* FALLTHROUGH */ + case AUDIBLE_BELL: + fprintf (stderr, "\007"); + fflush (stderr); + break; + } +#else /* __GO32__ */ + fprintf (stderr, "\007"); + fflush (stderr); +#endif /* __GO32__ */ + return (0); + } + return (-1); +} + +/* **************************************************************** */ +/* */ +/* Controlling the Meta Key and Keypad */ +/* */ +/* **************************************************************** */ + +void +_rl_enable_meta_key () +{ + if (term_has_meta && term_mm) + tputs (term_mm, 1, _rl_output_character_function); +} + +void +_rl_control_keypad (on) + int on; +{ + if (on && term_ks) + tputs (term_ks, 1, _rl_output_character_function); + else if (!on && term_ke) + tputs (term_ke, 1, _rl_output_character_function); +} diff --git a/readline/tilde.c b/readline/tilde.c new file mode 100644 index 00000000000..3741f9767b2 --- /dev/null +++ b/readline/tilde.c @@ -0,0 +1,466 @@ +/* tilde.c -- Tilde expansion code (~/foo := $HOME/foo). */ + +/* Copyright (C) 1988,1989 Free Software Foundation, Inc. + + This file is part of GNU Readline, a library for reading lines + of text with interactive input and history editing. + + Readline is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 1, or (at your option) any + later version. + + Readline is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline; see the file COPYING. If not, write to the Free + Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include <sys/types.h> +# endif +# include <unistd.h> +#endif + +#if defined (HAVE_STRING_H) +# include <string.h> +#else /* !HAVE_STRING_H */ +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <sys/types.h> +#include <pwd.h> + +#include "tilde.h" + +#ifdef SHELL +#include "shell.h" +#endif + +#if !defined (HAVE_GETPW_DECLS) +extern struct passwd *getpwuid (), *getpwnam (); +#endif /* !HAVE_GETPW_DECLS */ + +#if !defined (savestring) +extern char *xmalloc (); +# ifndef strcpy +extern char *strcpy (); +# endif +#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x)) +#endif /* !savestring */ + +#if !defined (NULL) +# if defined (__STDC__) +# define NULL ((void *) 0) +# else +# define NULL 0x0 +# endif /* !__STDC__ */ +#endif /* !NULL */ + +#if defined (TEST) || defined (STATIC_MALLOC) +static char *xmalloc (), *xrealloc (); +#else +extern char *xmalloc (), *xrealloc (); +#endif /* TEST || STATIC_MALLOC */ + +/* The default value of tilde_additional_prefixes. This is set to + whitespace preceding a tilde so that simple programs which do not + perform any word separation get desired behaviour. */ +static char *default_prefixes[] = + { " ~", "\t~", (char *)NULL }; + +/* The default value of tilde_additional_suffixes. This is set to + whitespace or newline so that simple programs which do not + perform any word separation get desired behaviour. */ +static char *default_suffixes[] = + { " ", "\n", (char *)NULL }; + +/* If non-null, this contains the address of a function that the application + wants called before trying the standard tilde expansions. The function + is called with the text sans tilde, and returns a malloc()'ed string + which is the expansion, or a NULL pointer if the expansion fails. */ +CPFunction *tilde_expansion_preexpansion_hook = (CPFunction *)NULL; + +/* If non-null, this contains the address of a function to call if the + standard meaning for expanding a tilde fails. The function is called + with the text (sans tilde, as in "foo"), and returns a malloc()'ed string + which is the expansion, or a NULL pointer if there is no expansion. */ +CPFunction *tilde_expansion_failure_hook = (CPFunction *)NULL; + +/* When non-null, this is a NULL terminated array of strings which + are duplicates for a tilde prefix. Bash uses this to expand + `=~' and `:~'. */ +char **tilde_additional_prefixes = default_prefixes; + +/* When non-null, this is a NULL terminated array of strings which match + the end of a username, instead of just "/". Bash sets this to + `:' and `=~'. */ +char **tilde_additional_suffixes = default_suffixes; + +/* Find the start of a tilde expansion in STRING, and return the index of + the tilde which starts the expansion. Place the length of the text + which identified this tilde starter in LEN, excluding the tilde itself. */ +static int +tilde_find_prefix (string, len) + char *string; + int *len; +{ + register int i, j, string_len; + register char **prefixes = tilde_additional_prefixes; + + string_len = strlen (string); + *len = 0; + + if (*string == '\0' || *string == '~') + return (0); + + if (prefixes) + { + for (i = 0; i < string_len; i++) + { + for (j = 0; prefixes[j]; j++) + { + if (strncmp (string + i, prefixes[j], strlen (prefixes[j])) == 0) + { + *len = strlen (prefixes[j]) - 1; + return (i + *len); + } + } + } + } + return (string_len); +} + +/* Find the end of a tilde expansion in STRING, and return the index of + the character which ends the tilde definition. */ +static int +tilde_find_suffix (string) + char *string; +{ + register int i, j, string_len; + register char **suffixes; + + suffixes = tilde_additional_suffixes; + string_len = strlen (string); + + for (i = 0; i < string_len; i++) + { + if (string[i] == '/' /* || !string[i] */) + break; + + for (j = 0; suffixes && suffixes[j]; j++) + { + if (strncmp (string + i, suffixes[j], strlen (suffixes[j])) == 0) + return (i); + } + } + return (i); +} + +#if !defined (SHELL) +static char * +get_string_value (varname) + char *varname; +{ + return ((char *)getenv (varname)); +} +#endif + +/* Return a new string which is the result of tilde expanding STRING. */ +char * +tilde_expand (string) + char *string; +{ + char *result; + int result_size, result_index; + + result_index = result_size = 0; + if (result = strchr (string, '~')) + result = xmalloc (result_size = (strlen (string) + 16)); + else + result = xmalloc (result_size = (strlen (string) + 1)); + + /* Scan through STRING expanding tildes as we come to them. */ + while (1) + { + register int start, end; + char *tilde_word, *expansion; + int len; + + /* Make START point to the tilde which starts the expansion. */ + start = tilde_find_prefix (string, &len); + + /* Copy the skipped text into the result. */ + if ((result_index + start + 1) > result_size) + result = xrealloc (result, 1 + (result_size += (start + 20))); + + strncpy (result + result_index, string, start); + result_index += start; + + /* Advance STRING to the starting tilde. */ + string += start; + + /* Make END be the index of one after the last character of the + username. */ + end = tilde_find_suffix (string); + + /* If both START and END are zero, we are all done. */ + if (!start && !end) + break; + + /* Expand the entire tilde word, and copy it into RESULT. */ + tilde_word = xmalloc (1 + end); + strncpy (tilde_word, string, end); + tilde_word[end] = '\0'; + string += end; + + expansion = tilde_expand_word (tilde_word); + free (tilde_word); + + len = strlen (expansion); + if ((result_index + len + 1) > result_size) + result = xrealloc (result, 1 + (result_size += (len + 20))); + + strcpy (result + result_index, expansion); + result_index += len; + free (expansion); + } + + result[result_index] = '\0'; + + return (result); +} + +/* Take FNAME and return the tilde prefix we want expanded. If LENP is + non-null, the index of the end of the prefix into FNAME is returned in + the location it points to. */ +static char * +isolate_tilde_prefix (fname, lenp) + char *fname; + int *lenp; +{ + char *ret; + int i; + + ret = xmalloc (strlen (fname)); + for (i = 1; fname[i] && fname[i] != '/'; i++) + ret[i - 1] = fname[i]; + ret[i - 1] = '\0'; + if (lenp) + *lenp = i; + return ret; +} + +/* Return a string that is PREFIX concatenated with SUFFIX starting at + SUFFIND. */ +static char * +glue_prefix_and_suffix (prefix, suffix, suffind) + char *prefix, *suffix; + int suffind; +{ + char *ret; + int plen, slen; + + plen = (prefix && *prefix) ? strlen (prefix) : 0; + slen = strlen (suffix + suffind); + ret = xmalloc (plen + slen + 1); + if (prefix && *prefix) + strcpy (ret, prefix); + strcpy (ret + plen, suffix + suffind); + return ret; +} + +static char * +get_home_dir () +{ + char *home_dir; + +#ifdef SHELL + home_dir = (char *)NULL; + if (current_user.home_dir == 0) + get_current_user_info (); + home_dir = current_user.home_dir; +#else + struct passwd *entry; + + home_dir = (char *)NULL; + entry = getpwuid (getuid ()); + if (entry) + home_dir = entry->pw_dir; +#endif + return (home_dir); +} + +/* Do the work of tilde expansion on FILENAME. FILENAME starts with a + tilde. If there is no expansion, call tilde_expansion_failure_hook. + This always returns a newly-allocated string, never static storage. */ +char * +tilde_expand_word (filename) + char *filename; +{ + char *dirname, *expansion, *username; + int user_len; + struct passwd *user_entry; + + if (filename == 0) + return ((char *)NULL); + + if (*filename != '~') + return (savestring (filename)); + + /* A leading `~/' or a bare `~' is *always* translated to the value of + $HOME or the home directory of the current user, regardless of any + preexpansion hook. */ + if (filename[1] == '\0' || filename[1] == '/') + { + /* Prefix $HOME to the rest of the string. */ + expansion = get_string_value ("HOME"); + + /* If there is no HOME variable, look up the directory in + the password database. */ + if (expansion == 0) + expansion = get_home_dir (); + + return (glue_prefix_and_suffix (expansion, filename, 1)); + } + + username = isolate_tilde_prefix (filename, &user_len); + + if (tilde_expansion_preexpansion_hook) + { + expansion = (*tilde_expansion_preexpansion_hook) (username); + if (expansion) + { + dirname = glue_prefix_and_suffix (expansion, filename, user_len); + free (username); + free (expansion); + return (dirname); + } + } + + /* No preexpansion hook, or the preexpansion hook failed. Look in the + password database. */ + dirname = (char *)NULL; + user_entry = getpwnam (username); + if (user_entry == 0) + { + /* If the calling program has a special syntax for expanding tildes, + and we couldn't find a standard expansion, then let them try. */ + if (tilde_expansion_failure_hook) + { + expansion = (*tilde_expansion_failure_hook) (username); + if (expansion) + { + dirname = glue_prefix_and_suffix (expansion, filename, user_len); + free (expansion); + } + } + free (username); + /* If we don't have a failure hook, or if the failure hook did not + expand the tilde, return a copy of what we were passed. */ + if (dirname == 0) + dirname = savestring (filename); + } + else + { + free (username); + dirname = glue_prefix_and_suffix (user_entry->pw_dir, filename, user_len); + } + + endpwent (); + return (dirname); +} + + +#if defined (TEST) +#undef NULL +#include <stdio.h> + +main (argc, argv) + int argc; + char **argv; +{ + char *result, line[512]; + int done = 0; + + while (!done) + { + printf ("~expand: "); + fflush (stdout); + + if (!gets (line)) + strcpy (line, "done"); + + if ((strcmp (line, "done") == 0) || + (strcmp (line, "quit") == 0) || + (strcmp (line, "exit") == 0)) + { + done = 1; + break; + } + + result = tilde_expand (line); + printf (" --> %s\n", result); + free (result); + } + exit (0); +} + +static void memory_error_and_abort (); + +static char * +xmalloc (bytes) + int bytes; +{ + char *temp = (char *)malloc (bytes); + + if (!temp) + memory_error_and_abort (); + return (temp); +} + +static char * +xrealloc (pointer, bytes) + char *pointer; + int bytes; +{ + char *temp; + + if (!pointer) + temp = (char *)malloc (bytes); + else + temp = (char *)realloc (pointer, bytes); + + if (!temp) + memory_error_and_abort (); + + return (temp); +} + +static void +memory_error_and_abort () +{ + fprintf (stderr, "readline: out of virtual memory\n"); + abort (); +} + +/* + * Local variables: + * compile-command: "gcc -g -DTEST -o tilde tilde.c" + * end: + */ +#endif /* TEST */ diff --git a/readline/tilde.h b/readline/tilde.h new file mode 100644 index 00000000000..634b95449aa --- /dev/null +++ b/readline/tilde.h @@ -0,0 +1,65 @@ +/* tilde.h: Externally available variables and function in libtilde.a. */ + +/* Copyright (C) 1992 Free Software Foundation, Inc. + + This file contains the Readline Library (the Library), a set of + routines for providing Emacs style line input to programs that ask + for it. + + The Library is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + The Library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (_TILDE_H_) +# define _TILDE_H_ + +/* Function pointers can be declared as (Function *)foo. */ +#if !defined (_FUNCTION_DEF) +# define _FUNCTION_DEF +typedef int Function (); +typedef void VFunction (); +typedef char *CPFunction (); +typedef char **CPPFunction (); +#endif /* _FUNCTION_DEF */ + +/* If non-null, this contains the address of a function that the application + wants called before trying the standard tilde expansions. The function + is called with the text sans tilde, and returns a malloc()'ed string + which is the expansion, or a NULL pointer if the expansion fails. */ +extern CPFunction *tilde_expansion_preexpansion_hook; + +/* If non-null, this contains the address of a function to call if the + standard meaning for expanding a tilde fails. The function is called + with the text (sans tilde, as in "foo"), and returns a malloc()'ed string + which is the expansion, or a NULL pointer if there is no expansion. */ +extern CPFunction *tilde_expansion_failure_hook; + +/* When non-null, this is a NULL terminated array of strings which + are duplicates for a tilde prefix. Bash uses this to expand + `=~' and `:~'. */ +extern char **tilde_additional_prefixes; + +/* When non-null, this is a NULL terminated array of strings which match + the end of a username, instead of just "/". Bash sets this to + `:' and `=~'. */ +extern char **tilde_additional_suffixes; + +/* Return a new string which is the result of tilde expanding STRING. */ +extern char *tilde_expand (); + +/* Do the work of tilde expansion on FILENAME. FILENAME starts with a + tilde. If there is no expansion, call tilde_expansion_failure_hook. */ +extern char *tilde_expand_word (); + +#endif /* _TILDE_H_ */ diff --git a/readline/undo.c b/readline/undo.c new file mode 100644 index 00000000000..28ebcc85b93 --- /dev/null +++ b/readline/undo.c @@ -0,0 +1,260 @@ +/* readline.c -- a general facility for reading lines of input + with emacs style editing and completion. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) + +/* Non-zero tells rl_delete_text and rl_insert_text to not add to + the undo list. */ +int _rl_doing_an_undo = 0; + +/* How many unclosed undo groups we currently have. */ +int _rl_undo_group_level = 0; + +/* The current undo list for THE_LINE. */ +UNDO_LIST *rl_undo_list = (UNDO_LIST *)NULL; + +/* **************************************************************** */ +/* */ +/* Undo, and Undoing */ +/* */ +/* **************************************************************** */ + +/* Remember how to undo something. Concatenate some undos if that + seems right. */ +void +rl_add_undo (what, start, end, text) + enum undo_code what; + int start, end; + char *text; +{ + UNDO_LIST *temp = (UNDO_LIST *)xmalloc (sizeof (UNDO_LIST)); + temp->what = what; + temp->start = start; + temp->end = end; + temp->text = text; + temp->next = rl_undo_list; + rl_undo_list = temp; +} + +/* Free the existing undo list. */ +void +free_undo_list () +{ + while (rl_undo_list) + { + UNDO_LIST *release = rl_undo_list; + rl_undo_list = rl_undo_list->next; + + if (release->what == UNDO_DELETE) + free (release->text); + + free (release); + } + rl_undo_list = (UNDO_LIST *)NULL; +} + +/* Undo the next thing in the list. Return 0 if there + is nothing to undo, or non-zero if there was. */ +int +rl_do_undo () +{ + UNDO_LIST *release; + int waiting_for_begin = 0; + int start, end; + +#define TRANS(i) ((i) == -1 ? rl_point : ((i) == -2 ? rl_end : (i))) + + do + { + if (!rl_undo_list) + return (0); + + _rl_doing_an_undo = 1; + + /* To better support vi-mode, a start or end value of -1 means + rl_point, and a value of -2 means rl_end. */ + if (rl_undo_list->what == UNDO_DELETE || rl_undo_list->what == UNDO_INSERT) + { + start = TRANS (rl_undo_list->start); + end = TRANS (rl_undo_list->end); + } + + switch (rl_undo_list->what) + { + /* Undoing deletes means inserting some text. */ + case UNDO_DELETE: + rl_point = start; + rl_insert_text (rl_undo_list->text); + free (rl_undo_list->text); + break; + + /* Undoing inserts means deleting some text. */ + case UNDO_INSERT: + rl_delete_text (start, end); + rl_point = start; + break; + + /* Undoing an END means undoing everything 'til we get to a BEGIN. */ + case UNDO_END: + waiting_for_begin++; + break; + + /* Undoing a BEGIN means that we are done with this group. */ + case UNDO_BEGIN: + if (waiting_for_begin) + waiting_for_begin--; + else + ding (); + break; + } + + _rl_doing_an_undo = 0; + + release = rl_undo_list; + rl_undo_list = rl_undo_list->next; + free (release); + } + while (waiting_for_begin); + + return (1); +} +#undef TRANS + +int +_rl_fix_last_undo_of_type (type, start, end) + int type, start, end; +{ + UNDO_LIST *rl; + + for (rl = rl_undo_list; rl; rl = rl->next) + { + if (rl->what == type) + { + rl->start = start; + rl->end = end; + return 0; + } + } + return 1; +} + +/* Begin a group. Subsequent undos are undone as an atomic operation. */ +int +rl_begin_undo_group () +{ + rl_add_undo (UNDO_BEGIN, 0, 0, 0); + _rl_undo_group_level++; + return 0; +} + +/* End an undo group started with rl_begin_undo_group (). */ +int +rl_end_undo_group () +{ + rl_add_undo (UNDO_END, 0, 0, 0); + _rl_undo_group_level--; + return 0; +} + +/* Save an undo entry for the text from START to END. */ +int +rl_modifying (start, end) + int start, end; +{ + if (start > end) + { + SWAP (start, end); + } + + if (start != end) + { + char *temp = rl_copy_text (start, end); + rl_begin_undo_group (); + rl_add_undo (UNDO_DELETE, start, end, temp); + rl_add_undo (UNDO_INSERT, start, end, (char *)NULL); + rl_end_undo_group (); + } + return 0; +} + +/* Revert the current line to its previous state. */ +int +rl_revert_line (count, key) + int count, key; +{ + if (!rl_undo_list) + ding (); + else + { + while (rl_undo_list) + rl_do_undo (); + } + return 0; +} + +/* Do some undoing of things that were done. */ +int +rl_undo_command (count, key) + int count, key; +{ + if (count < 0) + return 0; /* Nothing to do. */ + + while (count) + { + if (rl_do_undo ()) + count--; + else + { + ding (); + break; + } + } + return 0; +} diff --git a/readline/util.c b/readline/util.c new file mode 100644 index 00000000000..fde012edb61 --- /dev/null +++ b/readline/util.c @@ -0,0 +1,364 @@ +/* util.c -- readline utility functions */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> +#include <fcntl.h> +#include "posixjmp.h" + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include <stdio.h> +#include <ctype.h> + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#if defined (TIOCSTAT_IN_SYS_IOCTL) +# include <sys/ioctl.h> +#endif /* TIOCSTAT_IN_SYS_IOCTL */ + +/* Some standard library routines. */ +#include "readline.h" + +#define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) + +/* Pseudo-globals imported from readline.c */ +extern int readline_echoing_p; +extern procenv_t readline_top_level; +extern int rl_line_buffer_len; +extern Function *rl_last_func; + +extern int _rl_defining_kbd_macro; +extern char *_rl_executing_macro; + +/* Pseudo-global functions imported from other library files. */ +extern void _rl_pop_executing_macro (); +extern void _rl_set_the_line (); +extern void _rl_init_argument (); + +extern char *xmalloc (), *xrealloc (); + +/* **************************************************************** */ +/* */ +/* Utility Functions */ +/* */ +/* **************************************************************** */ + +/* Return 0 if C is not a member of the class of characters that belong + in words, or 1 if it is. */ + +int _rl_allow_pathname_alphabetic_chars = 0; +static char *pathname_alphabetic_chars = "/-_=~.#$"; + +int +alphabetic (c) + int c; +{ + if (ALPHABETIC (c)) + return (1); + + return (_rl_allow_pathname_alphabetic_chars && + strchr (pathname_alphabetic_chars, c) != NULL); +} + +/* How to abort things. */ +int +_rl_abort_internal () +{ + ding (); + rl_clear_message (); + _rl_init_argument (); + rl_pending_input = 0; + + _rl_defining_kbd_macro = 0; + while (_rl_executing_macro) + _rl_pop_executing_macro (); + + rl_last_func = (Function *)NULL; + longjmp (readline_top_level, 1); + return (0); +} + +int +rl_abort (count, key) + int count, key; +{ + return (_rl_abort_internal ()); +} + +int +rl_tty_status (count, key) + int count, key; +{ +#if defined (TIOCSTAT) + ioctl (1, TIOCSTAT, (char *)0); + rl_refresh_line (); +#else + ding (); +#endif + return 0; +} + +/* Return a copy of the string between FROM and TO. + FROM is inclusive, TO is not. */ +char * +rl_copy_text (from, to) + int from, to; +{ + register int length; + char *copy; + + /* Fix it if the caller is confused. */ + if (from > to) + SWAP (from, to); + + length = to - from; + copy = xmalloc (1 + length); + strncpy (copy, rl_line_buffer + from, length); + copy[length] = '\0'; + return (copy); +} + +/* Increase the size of RL_LINE_BUFFER until it has enough space to hold + LEN characters. */ +void +rl_extend_line_buffer (len) + int len; +{ + while (len >= rl_line_buffer_len) + { + rl_line_buffer_len += DEFAULT_BUFFER_SIZE; + rl_line_buffer = xrealloc (rl_line_buffer, rl_line_buffer_len); + } + + _rl_set_the_line (); +} + + +/* A function for simple tilde expansion. */ +int +rl_tilde_expand (ignore, key) + int ignore, key; +{ + register int start, end; + char *homedir, *temp; + int len; + + end = rl_point; + start = end - 1; + + if (rl_point == rl_end && rl_line_buffer[rl_point] == '~') + { + homedir = tilde_expand ("~"); + _rl_replace_text (homedir, start, end); + return (0); + } + else if (rl_line_buffer[start] != '~') + { + for (; !whitespace (rl_line_buffer[start]) && start >= 0; start--) + ; + start++; + } + + end = start; + do + end++; + while (whitespace (rl_line_buffer[end]) == 0 && end < rl_end); + + if (whitespace (rl_line_buffer[end]) || end >= rl_end) + end--; + + /* If the first character of the current word is a tilde, perform + tilde expansion and insert the result. If not a tilde, do + nothing. */ + if (rl_line_buffer[start] == '~') + { + len = end - start + 1; + temp = xmalloc (len + 1); + strncpy (temp, rl_line_buffer + start, len); + temp[len] = '\0'; + homedir = tilde_expand (temp); + free (temp); + + _rl_replace_text (homedir, start, end); + } + + return (0); +} + +/* **************************************************************** */ +/* */ +/* String Utility Functions */ +/* */ +/* **************************************************************** */ + +/* Determine if s2 occurs in s1. If so, return a pointer to the + match in s1. The compare is case insensitive. */ +char * +_rl_strindex (s1, s2) + register char *s1, *s2; +{ + register int i, l, len; + + for (i = 0, l = strlen (s2), len = strlen (s1); (len - i) >= l; i++) + if (_rl_strnicmp (s1 + i, s2, l) == 0) + return (s1 + i); + return ((char *)NULL); +} + +#if !defined (HAVE_STRCASECMP) +/* Compare at most COUNT characters from string1 to string2. Case + doesn't matter. */ +int +_rl_strnicmp (string1, string2, count) + char *string1, *string2; + int count; +{ + register char ch1, ch2; + + while (count) + { + ch1 = *string1++; + ch2 = *string2++; + if (_rl_to_upper(ch1) == _rl_to_upper(ch2)) + count--; + else + break; + } + return (count); +} + +/* strcmp (), but caseless. */ +int +_rl_stricmp (string1, string2) + char *string1, *string2; +{ + register char ch1, ch2; + + while (*string1 && *string2) + { + ch1 = *string1++; + ch2 = *string2++; + if (_rl_to_upper(ch1) != _rl_to_upper(ch2)) + return (1); + } + return (*string1 - *string2); +} +#endif /* !HAVE_STRCASECMP */ + +/* Stupid comparison routine for qsort () ing strings. */ +int +_rl_qsort_string_compare (s1, s2) + char **s1, **s2; +{ +#if defined (HAVE_STRCOLL) + return (strcoll (*s1, *s2)); +#else + int result; + + result = **s1 - **s2; + if (result == 0) + result = strcmp (*s1, *s2); + + return result; +#endif +} + +/* Function equivalents for the macros defined in chartypes.h. */ +#undef _rl_uppercase_p +int +_rl_uppercase_p (c) + int c; +{ + return (isupper (c)); +} + +#undef _rl_lowercase_p +int +_rl_lowercase_p (c) + int c; +{ + return (islower (c)); +} + +#undef _rl_pure_alphabetic +int +_rl_pure_alphabetic (c) + int c; +{ + return (isupper (c) || islower (c)); +} + +#undef _rl_digit_p +int +_rl_digit_p (c) + int c; +{ + return (isdigit (c)); +} + +#undef _rl_to_lower +int +_rl_to_lower (c) + int c; +{ + return (isupper (c) ? tolower (c) : c); +} + +#undef _rl_to_upper +int +_rl_to_upper (c) + int c; +{ + return (islower (c) ? toupper (c) : c); +} + +#undef _rl_digit_value +int +_rl_digit_value (c) + int c; +{ + return (isdigit (c) ? c - '0' : c); +} + +/* Backwards compatibility, now that savestring has been removed from + all `public' readline header files. */ +#undef _rl_savestring +char * +_rl_savestring (s) + char *s; +{ + return ((char *)strcpy (xmalloc (1 + (int)strlen (s)), (s))); +} diff --git a/readline/vi_keymap.c b/readline/vi_keymap.c new file mode 100644 index 00000000000..14929a31930 --- /dev/null +++ b/readline/vi_keymap.c @@ -0,0 +1,877 @@ +/* vi_keymap.c -- the keymap for vi_mode in readline (). */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if !defined (BUFSIZ) +#include <stdio.h> +#endif /* !BUFSIZ */ + +#include "readline.h" + +#if 0 +extern KEYMAP_ENTRY_ARRAY vi_escape_keymap; +#endif + +/* The keymap arrays for handling vi mode. */ +KEYMAP_ENTRY_ARRAY vi_movement_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (Function *)0x0 }, /* Control-@ */ + { ISFUNC, (Function *)0x0 }, /* Control-a */ + { ISFUNC, (Function *)0x0 }, /* Control-b */ + { ISFUNC, (Function *)0x0 }, /* Control-c */ + { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ + { ISFUNC, rl_emacs_editing_mode }, /* Control-e */ + { ISFUNC, (Function *)0x0 }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, rl_backward }, /* Control-h */ + { ISFUNC, (Function *)0x0 }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, rl_clear_screen }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_get_next_history }, /* Control-n */ + { ISFUNC, (Function *)0x0 }, /* Control-o */ + { ISFUNC, rl_get_previous_history }, /* Control-p */ + { ISFUNC, rl_quoted_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_unix_word_rubout }, /* Control-w */ + { ISFUNC, (Function *)0x0 }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, (Function *)0x0 }, /* Control-z */ + + { ISFUNC, (Function *)0x0 }, /* Control-[ */ /* vi_escape_keymap */ + { ISFUNC, (Function *)0x0 }, /* Control-\ */ + { ISFUNC, (Function *)0x0 }, /* Control-] */ + { ISFUNC, (Function *)0x0 }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_forward }, /* SPACE */ + { ISFUNC, (Function *)0x0 }, /* ! */ + { ISFUNC, (Function *)0x0 }, /* " */ + { ISFUNC, rl_insert_comment }, /* # */ + { ISFUNC, rl_end_of_line }, /* $ */ + { ISFUNC, rl_vi_match }, /* % */ + { ISFUNC, rl_vi_tilde_expand }, /* & */ + { ISFUNC, (Function *)0x0 }, /* ' */ + { ISFUNC, (Function *)0x0 }, /* ( */ + { ISFUNC, (Function *)0x0 }, /* ) */ + { ISFUNC, rl_vi_complete }, /* * */ + { ISFUNC, rl_get_next_history}, /* + */ + { ISFUNC, rl_vi_char_search }, /* , */ + { ISFUNC, rl_get_previous_history }, /* - */ + { ISFUNC, rl_vi_redo }, /* . */ + { ISFUNC, rl_vi_search }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_beg_of_line }, /* 0 */ + { ISFUNC, rl_vi_arg_digit }, /* 1 */ + { ISFUNC, rl_vi_arg_digit }, /* 2 */ + { ISFUNC, rl_vi_arg_digit }, /* 3 */ + { ISFUNC, rl_vi_arg_digit }, /* 4 */ + { ISFUNC, rl_vi_arg_digit }, /* 5 */ + { ISFUNC, rl_vi_arg_digit }, /* 6 */ + { ISFUNC, rl_vi_arg_digit }, /* 7 */ + { ISFUNC, rl_vi_arg_digit }, /* 8 */ + { ISFUNC, rl_vi_arg_digit }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* : */ + { ISFUNC, rl_vi_char_search }, /* ; */ + { ISFUNC, (Function *)0x0 }, /* < */ + { ISFUNC, rl_vi_complete }, /* = */ + { ISFUNC, (Function *)0x0 }, /* > */ + { ISFUNC, rl_vi_search }, /* ? */ + { ISFUNC, (Function *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_vi_append_eol }, /* A */ + { ISFUNC, rl_vi_prev_word}, /* B */ + { ISFUNC, rl_vi_change_to }, /* C */ + { ISFUNC, rl_vi_delete_to }, /* D */ + { ISFUNC, rl_vi_end_word }, /* E */ + { ISFUNC, rl_vi_char_search }, /* F */ + { ISFUNC, rl_vi_fetch_history }, /* G */ + { ISFUNC, (Function *)0x0 }, /* H */ + { ISFUNC, rl_vi_insert_beg }, /* I */ + { ISFUNC, (Function *)0x0 }, /* J */ + { ISFUNC, (Function *)0x0 }, /* K */ + { ISFUNC, (Function *)0x0 }, /* L */ + { ISFUNC, (Function *)0x0 }, /* M */ + { ISFUNC, rl_vi_search_again }, /* N */ + { ISFUNC, (Function *)0x0 }, /* O */ + { ISFUNC, rl_vi_put }, /* P */ + { ISFUNC, (Function *)0x0 }, /* Q */ + { ISFUNC, rl_vi_replace }, /* R */ + { ISFUNC, rl_vi_subst }, /* S */ + { ISFUNC, rl_vi_char_search }, /* T */ + { ISFUNC, rl_revert_line }, /* U */ + { ISFUNC, (Function *)0x0 }, /* V */ + { ISFUNC, rl_vi_next_word }, /* W */ + { ISFUNC, rl_rubout }, /* X */ + { ISFUNC, rl_vi_yank_to }, /* Y */ + { ISFUNC, (Function *)0x0 }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* [ */ + { ISFUNC, rl_vi_complete }, /* \ */ + { ISFUNC, (Function *)0x0 }, /* ] */ + { ISFUNC, rl_vi_first_print }, /* ^ */ + { ISFUNC, rl_vi_yank_arg }, /* _ */ + { ISFUNC, rl_vi_goto_mark }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_vi_append_mode }, /* a */ + { ISFUNC, rl_vi_prev_word }, /* b */ + { ISFUNC, rl_vi_change_to }, /* c */ + { ISFUNC, rl_vi_delete_to }, /* d */ + { ISFUNC, rl_vi_end_word }, /* e */ + { ISFUNC, rl_vi_char_search }, /* f */ + { ISFUNC, (Function *)0x0 }, /* g */ + { ISFUNC, rl_backward }, /* h */ + { ISFUNC, rl_vi_insertion_mode }, /* i */ + { ISFUNC, rl_get_next_history }, /* j */ + { ISFUNC, rl_get_previous_history }, /* k */ + { ISFUNC, rl_forward }, /* l */ + { ISFUNC, rl_vi_set_mark }, /* m */ + { ISFUNC, rl_vi_search_again }, /* n */ + { ISFUNC, (Function *)0x0 }, /* o */ + { ISFUNC, rl_vi_put }, /* p */ + { ISFUNC, (Function *)0x0 }, /* q */ + { ISFUNC, rl_vi_change_char }, /* r */ + { ISFUNC, rl_vi_subst }, /* s */ + { ISFUNC, rl_vi_char_search }, /* t */ + { ISFUNC, rl_vi_undo }, /* u */ + { ISFUNC, (Function *)0x0 }, /* v */ + { ISFUNC, rl_vi_next_word }, /* w */ + { ISFUNC, rl_vi_delete }, /* x */ + { ISFUNC, rl_vi_yank_to }, /* y */ + { ISFUNC, (Function *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (Function *)0x0 }, /* { */ + { ISFUNC, rl_vi_column }, /* | */ + { ISFUNC, (Function *)0x0 }, /* } */ + { ISFUNC, rl_vi_change_case }, /* ~ */ + { ISFUNC, (Function *)0x0 }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; + + +KEYMAP_ENTRY_ARRAY vi_insertion_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (Function *)0x0 }, /* Control-@ */ + { ISFUNC, rl_insert }, /* Control-a */ + { ISFUNC, rl_insert }, /* Control-b */ + { ISFUNC, rl_insert }, /* Control-c */ + { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ + { ISFUNC, rl_insert }, /* Control-e */ + { ISFUNC, rl_insert }, /* Control-f */ + { ISFUNC, rl_insert }, /* Control-g */ + { ISFUNC, rl_rubout }, /* Control-h */ + { ISFUNC, rl_complete }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_insert }, /* Control-k */ + { ISFUNC, rl_insert }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_insert }, /* Control-n */ + { ISFUNC, rl_insert }, /* Control-o */ + { ISFUNC, rl_insert }, /* Control-p */ + { ISFUNC, rl_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_unix_word_rubout }, /* Control-w */ + { ISFUNC, rl_insert }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, rl_insert }, /* Control-z */ + + { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ + { ISFUNC, rl_insert }, /* Control-\ */ + { ISFUNC, rl_insert }, /* Control-] */ + { ISFUNC, rl_insert }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_insert }, /* SPACE */ + { ISFUNC, rl_insert }, /* ! */ + { ISFUNC, rl_insert }, /* " */ + { ISFUNC, rl_insert }, /* # */ + { ISFUNC, rl_insert }, /* $ */ + { ISFUNC, rl_insert }, /* % */ + { ISFUNC, rl_insert }, /* & */ + { ISFUNC, rl_insert }, /* ' */ + { ISFUNC, rl_insert }, /* ( */ + { ISFUNC, rl_insert }, /* ) */ + { ISFUNC, rl_insert }, /* * */ + { ISFUNC, rl_insert }, /* + */ + { ISFUNC, rl_insert }, /* , */ + { ISFUNC, rl_insert }, /* - */ + { ISFUNC, rl_insert }, /* . */ + { ISFUNC, rl_insert }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_insert }, /* 0 */ + { ISFUNC, rl_insert }, /* 1 */ + { ISFUNC, rl_insert }, /* 2 */ + { ISFUNC, rl_insert }, /* 3 */ + { ISFUNC, rl_insert }, /* 4 */ + { ISFUNC, rl_insert }, /* 5 */ + { ISFUNC, rl_insert }, /* 6 */ + { ISFUNC, rl_insert }, /* 7 */ + { ISFUNC, rl_insert }, /* 8 */ + { ISFUNC, rl_insert }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, rl_insert }, /* : */ + { ISFUNC, rl_insert }, /* ; */ + { ISFUNC, rl_insert }, /* < */ + { ISFUNC, rl_insert }, /* = */ + { ISFUNC, rl_insert }, /* > */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_insert }, /* A */ + { ISFUNC, rl_insert }, /* B */ + { ISFUNC, rl_insert }, /* C */ + { ISFUNC, rl_insert }, /* D */ + { ISFUNC, rl_insert }, /* E */ + { ISFUNC, rl_insert }, /* F */ + { ISFUNC, rl_insert }, /* G */ + { ISFUNC, rl_insert }, /* H */ + { ISFUNC, rl_insert }, /* I */ + { ISFUNC, rl_insert }, /* J */ + { ISFUNC, rl_insert }, /* K */ + { ISFUNC, rl_insert }, /* L */ + { ISFUNC, rl_insert }, /* M */ + { ISFUNC, rl_insert }, /* N */ + { ISFUNC, rl_insert }, /* O */ + { ISFUNC, rl_insert }, /* P */ + { ISFUNC, rl_insert }, /* Q */ + { ISFUNC, rl_insert }, /* R */ + { ISFUNC, rl_insert }, /* S */ + { ISFUNC, rl_insert }, /* T */ + { ISFUNC, rl_insert }, /* U */ + { ISFUNC, rl_insert }, /* V */ + { ISFUNC, rl_insert }, /* W */ + { ISFUNC, rl_insert }, /* X */ + { ISFUNC, rl_insert }, /* Y */ + { ISFUNC, rl_insert }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_insert }, /* [ */ + { ISFUNC, rl_insert }, /* \ */ + { ISFUNC, rl_insert }, /* ] */ + { ISFUNC, rl_insert }, /* ^ */ + { ISFUNC, rl_insert }, /* _ */ + { ISFUNC, rl_insert }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_insert }, /* a */ + { ISFUNC, rl_insert }, /* b */ + { ISFUNC, rl_insert }, /* c */ + { ISFUNC, rl_insert }, /* d */ + { ISFUNC, rl_insert }, /* e */ + { ISFUNC, rl_insert }, /* f */ + { ISFUNC, rl_insert }, /* g */ + { ISFUNC, rl_insert }, /* h */ + { ISFUNC, rl_insert }, /* i */ + { ISFUNC, rl_insert }, /* j */ + { ISFUNC, rl_insert }, /* k */ + { ISFUNC, rl_insert }, /* l */ + { ISFUNC, rl_insert }, /* m */ + { ISFUNC, rl_insert }, /* n */ + { ISFUNC, rl_insert }, /* o */ + { ISFUNC, rl_insert }, /* p */ + { ISFUNC, rl_insert }, /* q */ + { ISFUNC, rl_insert }, /* r */ + { ISFUNC, rl_insert }, /* s */ + { ISFUNC, rl_insert }, /* t */ + { ISFUNC, rl_insert }, /* u */ + { ISFUNC, rl_insert }, /* v */ + { ISFUNC, rl_insert }, /* w */ + { ISFUNC, rl_insert }, /* x */ + { ISFUNC, rl_insert }, /* y */ + { ISFUNC, rl_insert }, /* z */ + + /* Final punctuation. */ + { ISFUNC, rl_insert }, /* { */ + { ISFUNC, rl_insert }, /* | */ + { ISFUNC, rl_insert }, /* } */ + { ISFUNC, rl_insert }, /* ~ */ + { ISFUNC, rl_rubout }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Pure 8-bit characters (128 - 159). + These might be used in some + character sets. */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + + /* ISO Latin-1 characters (160 - 255) */ + { ISFUNC, rl_insert }, /* No-break space */ + { ISFUNC, rl_insert }, /* Inverted exclamation mark */ + { ISFUNC, rl_insert }, /* Cent sign */ + { ISFUNC, rl_insert }, /* Pound sign */ + { ISFUNC, rl_insert }, /* Currency sign */ + { ISFUNC, rl_insert }, /* Yen sign */ + { ISFUNC, rl_insert }, /* Broken bar */ + { ISFUNC, rl_insert }, /* Section sign */ + { ISFUNC, rl_insert }, /* Diaeresis */ + { ISFUNC, rl_insert }, /* Copyright sign */ + { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ + { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Not sign */ + { ISFUNC, rl_insert }, /* Soft hyphen */ + { ISFUNC, rl_insert }, /* Registered sign */ + { ISFUNC, rl_insert }, /* Macron */ + { ISFUNC, rl_insert }, /* Degree sign */ + { ISFUNC, rl_insert }, /* Plus-minus sign */ + { ISFUNC, rl_insert }, /* Superscript two */ + { ISFUNC, rl_insert }, /* Superscript three */ + { ISFUNC, rl_insert }, /* Acute accent */ + { ISFUNC, rl_insert }, /* Micro sign */ + { ISFUNC, rl_insert }, /* Pilcrow sign */ + { ISFUNC, rl_insert }, /* Middle dot */ + { ISFUNC, rl_insert }, /* Cedilla */ + { ISFUNC, rl_insert }, /* Superscript one */ + { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ + { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ + { ISFUNC, rl_insert }, /* Vulgar fraction one half */ + { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ + { ISFUNC, rl_insert }, /* Inverted questionk mark */ + { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin capital letter ae */ + { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Multiplication sign */ + { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ + { ISFUNC, rl_insert }, /* Latin small letter a with grave */ + { ISFUNC, rl_insert }, /* Latin small letter a with acute */ + { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin small letter ae */ + { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin small letter e with grave */ + { ISFUNC, rl_insert }, /* Latin small letter e with acute */ + { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter i with grave */ + { ISFUNC, rl_insert }, /* Latin small letter i with acute */ + { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with grave */ + { ISFUNC, rl_insert }, /* Latin small letter o with acute */ + { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Division sign */ + { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin small letter u with grave */ + { ISFUNC, rl_insert }, /* Latin small letter u with acute */ + { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter y with acute */ + { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ + { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ +#endif /* KEYMAP_SIZE > 128 */ +}; + +/* Unused for the time being. */ +#if 0 +KEYMAP_ENTRY_ARRAY vi_escape_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (Function *)0x0 }, /* Control-@ */ + { ISFUNC, (Function *)0x0 }, /* Control-a */ + { ISFUNC, (Function *)0x0 }, /* Control-b */ + { ISFUNC, (Function *)0x0 }, /* Control-c */ + { ISFUNC, (Function *)0x0 }, /* Control-d */ + { ISFUNC, (Function *)0x0 }, /* Control-e */ + { ISFUNC, (Function *)0x0 }, /* Control-f */ + { ISFUNC, (Function *)0x0 }, /* Control-g */ + { ISFUNC, (Function *)0x0 }, /* Control-h */ + { ISFUNC, rl_tab_insert}, /* Control-i */ + { ISFUNC, rl_emacs_editing_mode}, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, (Function *)0x0 }, /* Control-l */ + { ISFUNC, rl_emacs_editing_mode}, /* Control-m */ + { ISFUNC, (Function *)0x0 }, /* Control-n */ + { ISFUNC, (Function *)0x0 }, /* Control-o */ + { ISFUNC, (Function *)0x0 }, /* Control-p */ + { ISFUNC, (Function *)0x0 }, /* Control-q */ + { ISFUNC, (Function *)0x0 }, /* Control-r */ + { ISFUNC, (Function *)0x0 }, /* Control-s */ + { ISFUNC, (Function *)0x0 }, /* Control-t */ + { ISFUNC, (Function *)0x0 }, /* Control-u */ + { ISFUNC, (Function *)0x0 }, /* Control-v */ + { ISFUNC, (Function *)0x0 }, /* Control-w */ + { ISFUNC, (Function *)0x0 }, /* Control-x */ + { ISFUNC, (Function *)0x0 }, /* Control-y */ + { ISFUNC, (Function *)0x0 }, /* Control-z */ + + { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ + { ISFUNC, (Function *)0x0 }, /* Control-\ */ + { ISFUNC, (Function *)0x0 }, /* Control-] */ + { ISFUNC, (Function *)0x0 }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, (Function *)0x0 }, /* SPACE */ + { ISFUNC, (Function *)0x0 }, /* ! */ + { ISFUNC, (Function *)0x0 }, /* " */ + { ISFUNC, (Function *)0x0 }, /* # */ + { ISFUNC, (Function *)0x0 }, /* $ */ + { ISFUNC, (Function *)0x0 }, /* % */ + { ISFUNC, (Function *)0x0 }, /* & */ + { ISFUNC, (Function *)0x0 }, /* ' */ + { ISFUNC, (Function *)0x0 }, /* ( */ + { ISFUNC, (Function *)0x0 }, /* ) */ + { ISFUNC, (Function *)0x0 }, /* * */ + { ISFUNC, (Function *)0x0 }, /* + */ + { ISFUNC, (Function *)0x0 }, /* , */ + { ISFUNC, (Function *)0x0 }, /* - */ + { ISFUNC, (Function *)0x0 }, /* . */ + { ISFUNC, (Function *)0x0 }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_vi_arg_digit }, /* 0 */ + { ISFUNC, rl_vi_arg_digit }, /* 1 */ + { ISFUNC, rl_vi_arg_digit }, /* 2 */ + { ISFUNC, rl_vi_arg_digit }, /* 3 */ + { ISFUNC, rl_vi_arg_digit }, /* 4 */ + { ISFUNC, rl_vi_arg_digit }, /* 5 */ + { ISFUNC, rl_vi_arg_digit }, /* 6 */ + { ISFUNC, rl_vi_arg_digit }, /* 7 */ + { ISFUNC, rl_vi_arg_digit }, /* 8 */ + { ISFUNC, rl_vi_arg_digit }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (Function *)0x0 }, /* : */ + { ISFUNC, (Function *)0x0 }, /* ; */ + { ISFUNC, (Function *)0x0 }, /* < */ + { ISFUNC, (Function *)0x0 }, /* = */ + { ISFUNC, (Function *)0x0 }, /* > */ + { ISFUNC, (Function *)0x0 }, /* ? */ + { ISFUNC, (Function *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* A */ + { ISFUNC, rl_do_lowercase_version }, /* B */ + { ISFUNC, rl_do_lowercase_version }, /* C */ + { ISFUNC, rl_do_lowercase_version }, /* D */ + { ISFUNC, rl_do_lowercase_version }, /* E */ + { ISFUNC, rl_do_lowercase_version }, /* F */ + { ISFUNC, rl_do_lowercase_version }, /* G */ + { ISFUNC, rl_do_lowercase_version }, /* H */ + { ISFUNC, rl_do_lowercase_version }, /* I */ + { ISFUNC, rl_do_lowercase_version }, /* J */ + { ISFUNC, rl_do_lowercase_version }, /* K */ + { ISFUNC, rl_do_lowercase_version }, /* L */ + { ISFUNC, rl_do_lowercase_version }, /* M */ + { ISFUNC, rl_do_lowercase_version }, /* N */ + { ISFUNC, rl_do_lowercase_version }, /* O */ + { ISFUNC, rl_do_lowercase_version }, /* P */ + { ISFUNC, rl_do_lowercase_version }, /* Q */ + { ISFUNC, rl_do_lowercase_version }, /* R */ + { ISFUNC, rl_do_lowercase_version }, /* S */ + { ISFUNC, rl_do_lowercase_version }, /* T */ + { ISFUNC, rl_do_lowercase_version }, /* U */ + { ISFUNC, rl_do_lowercase_version }, /* V */ + { ISFUNC, rl_do_lowercase_version }, /* W */ + { ISFUNC, rl_do_lowercase_version }, /* X */ + { ISFUNC, rl_do_lowercase_version }, /* Y */ + { ISFUNC, rl_do_lowercase_version }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_arrow_keys }, /* [ */ + { ISFUNC, (Function *)0x0 }, /* \ */ + { ISFUNC, (Function *)0x0 }, /* ] */ + { ISFUNC, (Function *)0x0 }, /* ^ */ + { ISFUNC, (Function *)0x0 }, /* _ */ + { ISFUNC, (Function *)0x0 }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, (Function *)0x0 }, /* a */ + { ISFUNC, (Function *)0x0 }, /* b */ + { ISFUNC, (Function *)0x0 }, /* c */ + { ISFUNC, (Function *)0x0 }, /* d */ + { ISFUNC, (Function *)0x0 }, /* e */ + { ISFUNC, (Function *)0x0 }, /* f */ + { ISFUNC, (Function *)0x0 }, /* g */ + { ISFUNC, (Function *)0x0 }, /* h */ + { ISFUNC, (Function *)0x0 }, /* i */ + { ISFUNC, (Function *)0x0 }, /* j */ + { ISFUNC, (Function *)0x0 }, /* k */ + { ISFUNC, (Function *)0x0 }, /* l */ + { ISFUNC, (Function *)0x0 }, /* m */ + { ISFUNC, (Function *)0x0 }, /* n */ + { ISFUNC, rl_arrow_keys }, /* o */ + { ISFUNC, (Function *)0x0 }, /* p */ + { ISFUNC, (Function *)0x0 }, /* q */ + { ISFUNC, (Function *)0x0 }, /* r */ + { ISFUNC, (Function *)0x0 }, /* s */ + { ISFUNC, (Function *)0x0 }, /* t */ + { ISFUNC, (Function *)0x0 }, /* u */ + { ISFUNC, (Function *)0x0 }, /* v */ + { ISFUNC, (Function *)0x0 }, /* w */ + { ISFUNC, (Function *)0x0 }, /* x */ + { ISFUNC, (Function *)0x0 }, /* y */ + { ISFUNC, (Function *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (Function *)0x0 }, /* { */ + { ISFUNC, (Function *)0x0 }, /* | */ + { ISFUNC, (Function *)0x0 }, /* } */ + { ISFUNC, (Function *)0x0 }, /* ~ */ + { ISFUNC, rl_backward_kill_word }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 }, + { ISFUNC, (Function *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; +#endif diff --git a/readline/vi_mode.c b/readline/vi_mode.c new file mode 100644 index 00000000000..2f62ec3d480 --- /dev/null +++ b/readline/vi_mode.c @@ -0,0 +1,1385 @@ +/* vi_mode.c -- A vi emulation mode for Bash. + Derived from code written by Jeff Sparkes (jsparkes@bnr.ca). */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library, a library for + reading lines of text with interactive input and history editing. + + The GNU Readline Library is free software; you can redistribute it + and/or modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 1, or + (at your option) any later version. + + The GNU Readline Library is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied warranty + of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The GNU General Public License is often shipped with GNU software, and + is generally kept in a file called COPYING or LICENSE. If you do not + have a copy of the license, write to the Free Software Foundation, + 675 Mass Ave, Cambridge, MA 02139, USA. */ +#define READLINE_LIBRARY + +/* **************************************************************** */ +/* */ +/* VI Emulation Mode */ +/* */ +/* **************************************************************** */ +#include "rlconf.h" + +#if defined (VI_MODE) + +#if defined (HAVE_CONFIG_H) +# include <config.h> +#endif + +#include <sys/types.h> + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# include <unistd.h> +#endif + +#include <stdio.h> + +/* Some standard library routines. */ +#include "rldefs.h" +#include "readline.h" +#include "history.h" + +#ifndef _rl_digit_p +#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') +#endif + +#ifndef _rl_digit_value +#define _rl_digit_value(c) ((c) - '0') +#endif + +#ifndef member +#define member(c, s) ((c) ? (char *)strchr ((s), (c)) != (char *)NULL : 0) +#endif + +#ifndef isident +#define isident(c) ((_rl_pure_alphabetic (c) || _rl_digit_p (c) || c == '_')) +#endif + +#ifndef exchange +#define exchange(x, y) do {int temp = x; x = y; y = temp;} while (0) +#endif + +extern char *xmalloc (), *xrealloc (); + +/* Variables imported from readline.c */ +extern int rl_point, rl_end, rl_mark, rl_done; +extern FILE *rl_instream; +extern int rl_line_buffer_len, rl_explicit_arg, rl_numeric_arg; +extern Keymap _rl_keymap; +extern char *rl_prompt; +extern char *rl_line_buffer; +extern int rl_arg_sign; + +extern int _rl_doing_an_undo; +extern int _rl_undo_group_level; + +extern void _rl_dispatch (); +extern int _rl_char_search_internal (); + +extern void rl_extend_line_buffer (); +extern int rl_vi_check (); + +/* Non-zero means enter insertion mode. */ +static int _rl_vi_doing_insert; + +/* Command keys which do movement for xxx_to commands. */ +static char *vi_motion = " hl^$0ftFt;,%wbeWBE|"; + +/* Keymap used for vi replace characters. Created dynamically since + rarely used. */ +static Keymap vi_replace_map; + +/* The number of characters inserted in the last replace operation. */ +static int vi_replace_count; + +/* If non-zero, we have text inserted after a c[motion] command that put + us implicitly into insert mode. Some people want this text to be + attached to the command so that it is `redoable' with `.'. */ +static int vi_continued_command; +static char *vi_insert_buffer; +static int vi_insert_buffer_size; + +static int _rl_vi_last_command = 'i'; /* default `.' puts you in insert mode */ +static int _rl_vi_last_repeat = 1; +static int _rl_vi_last_arg_sign = 1; +static int _rl_vi_last_motion; +static int _rl_vi_last_search_char; +static int _rl_vi_last_replacement; + +static int _rl_vi_last_key_before_insert; + +static int vi_redoing; + +/* Text modification commands. These are the `redoable' commands. */ +static char *vi_textmod = "_*\\AaIiCcDdPpYyRrSsXx~"; + +/* Arrays for the saved marks. */ +static int vi_mark_chars[27]; + +static int rl_digit_loop1 (); + +void +_rl_vi_initialize_line () +{ + register int i; + + for (i = 0; i < sizeof (vi_mark_chars) / sizeof (int); i++) + vi_mark_chars[i] = -1; +} + +void +_rl_vi_reset_last () +{ + _rl_vi_last_command = 'i'; + _rl_vi_last_repeat = 1; + _rl_vi_last_arg_sign = 1; + _rl_vi_last_motion = 0; +} + +void +_rl_vi_set_last (key, repeat, sign) + int key, repeat, sign; +{ + _rl_vi_last_command = key; + _rl_vi_last_repeat = repeat; + _rl_vi_last_arg_sign = sign; +} + +/* Is the command C a VI mode text modification command? */ +int +_rl_vi_textmod_command (c) + int c; +{ + return (member (c, vi_textmod)); +} + +static void +_rl_vi_stuff_insert (count) + int count; +{ + rl_begin_undo_group (); + while (count--) + rl_insert_text (vi_insert_buffer); + rl_end_undo_group (); +} + +/* Bound to `.'. Called from command mode, so we know that we have to + redo a text modification command. The default for _rl_vi_last_command + puts you back into insert mode. */ +int +rl_vi_redo (count, c) + int count, c; +{ + if (!rl_explicit_arg) + { + rl_numeric_arg = _rl_vi_last_repeat; + rl_arg_sign = _rl_vi_last_arg_sign; + } + + vi_redoing = 1; + /* If we're redoing an insert with `i', stuff in the inserted text + and do not go into insertion mode. */ + if (_rl_vi_last_command == 'i' && vi_insert_buffer && *vi_insert_buffer) + { + _rl_vi_stuff_insert (count); + /* And back up point over the last character inserted. */ + if (rl_point > 0) + rl_point--; + } + else + _rl_dispatch (_rl_vi_last_command, _rl_keymap); + vi_redoing = 0; + + return (0); +} + +/* A placeholder for further expansion. */ +int +rl_vi_undo (count, key) + int count, key; +{ + return (rl_undo_command (count, key)); +} + +/* Yank the nth arg from the previous line into this line at point. */ +int +rl_vi_yank_arg (count, key) + int count, key; +{ + /* Readline thinks that the first word on a line is the 0th, while vi + thinks the first word on a line is the 1st. Compensate. */ + if (rl_explicit_arg) + rl_yank_nth_arg (count - 1, 0); + else + rl_yank_nth_arg ('$', 0); + + return (0); +} + +/* With an argument, move back that many history lines, else move to the + beginning of history. */ +int +rl_vi_fetch_history (count, c) + int count, c; +{ + int wanted; + + /* Giving an argument of n means we want the nth command in the history + file. The command number is interpreted the same way that the bash + `history' command does it -- that is, giving an argument count of 450 + to this command would get the command listed as number 450 in the + output of `history'. */ + if (rl_explicit_arg) + { + wanted = history_base + where_history () - count; + if (wanted <= 0) + rl_beginning_of_history (0, 0); + else + rl_get_previous_history (wanted, c); + } + else + rl_beginning_of_history (count, 0); + return (0); +} + +/* Search again for the last thing searched for. */ +int +rl_vi_search_again (count, key) + int count, key; +{ + switch (key) + { + case 'n': + rl_noninc_reverse_search_again (count, key); + break; + + case 'N': + rl_noninc_forward_search_again (count, key); + break; + } + return (0); +} + +/* Do a vi style search. */ +int +rl_vi_search (count, key) + int count, key; +{ + switch (key) + { + case '?': + rl_noninc_forward_search (count, key); + break; + + case '/': + rl_noninc_reverse_search (count, key); + break; + + default: + ding (); + break; + } + return (0); +} + +/* Completion, from vi's point of view. */ +int +rl_vi_complete (ignore, key) + int ignore, key; +{ + if ((rl_point < rl_end) && (!whitespace (rl_line_buffer[rl_point]))) + { + if (!whitespace (rl_line_buffer[rl_point + 1])) + rl_vi_end_word (1, 'E'); + rl_point++; + } + + if (key == '*') + rl_complete_internal ('*'); /* Expansion and replacement. */ + else if (key == '=') + rl_complete_internal ('?'); /* List possible completions. */ + else if (key == '\\') + rl_complete_internal (TAB); /* Standard Readline completion. */ + else + rl_complete (0, key); + + if (key == '*' || key == '\\') + { + _rl_vi_set_last (key, 1, rl_arg_sign); + rl_vi_insertion_mode (1, key); + } + return (0); +} + +/* Tilde expansion for vi mode. */ +int +rl_vi_tilde_expand (ignore, key) + int ignore, key; +{ + rl_tilde_expand (0, key); + _rl_vi_set_last (key, 1, rl_arg_sign); /* XXX */ + rl_vi_insertion_mode (1, key); + return (0); +} + +/* Previous word in vi mode. */ +int +rl_vi_prev_word (count, key) + int count, key; +{ + if (count < 0) + return (rl_vi_next_word (-count, key)); + + if (rl_point == 0) + { + ding (); + return (0); + } + + if (_rl_uppercase_p (key)) + rl_vi_bWord (count); + else + rl_vi_bword (count); + + return (0); +} + +/* Next word in vi mode. */ +int +rl_vi_next_word (count, key) + int count, key; +{ + if (count < 0) + return (rl_vi_prev_word (-count, key)); + + if (rl_point >= (rl_end - 1)) + { + ding (); + return (0); + } + + if (_rl_uppercase_p (key)) + rl_vi_fWord (count); + else + rl_vi_fword (count); + return (0); +} + +/* Move to the end of the ?next? word. */ +int +rl_vi_end_word (count, key) + int count, key; +{ + if (count < 0) + { + ding (); + return -1; + } + + if (_rl_uppercase_p (key)) + rl_vi_eWord (count); + else + rl_vi_eword (count); + return (0); +} + +/* Move forward a word the way that 'W' does. */ +int +rl_vi_fWord (count) + int count; +{ + while (count-- && rl_point < (rl_end - 1)) + { + /* Skip until whitespace. */ + while (!whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + rl_point++; + + /* Now skip whitespace. */ + while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + rl_point++; + } + return (0); +} + +int +rl_vi_bWord (count) + int count; +{ + while (count-- && rl_point > 0) + { + /* If we are at the start of a word, move back to whitespace so + we will go back to the start of the previous word. */ + if (!whitespace (rl_line_buffer[rl_point]) && + whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) + rl_point--; + + if (rl_point > 0) + { + while (--rl_point >= 0 && !whitespace (rl_line_buffer[rl_point])); + rl_point++; + } + } + return (0); +} + +int +rl_vi_eWord (count) + int count; +{ + while (count-- && rl_point < (rl_end - 1)) + { + if (!whitespace (rl_line_buffer[rl_point])) + rl_point++; + + /* Move to the next non-whitespace character (to the start of the + next word). */ + while (++rl_point < rl_end && whitespace (rl_line_buffer[rl_point])); + + if (rl_point && rl_point < rl_end) + { + /* Skip whitespace. */ + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + rl_point++; + + /* Skip until whitespace. */ + while (rl_point < rl_end && !whitespace (rl_line_buffer[rl_point])) + rl_point++; + + /* Move back to the last character of the word. */ + rl_point--; + } + } + return (0); +} + +int +rl_vi_fword (count) + int count; +{ + while (count-- && rl_point < (rl_end - 1)) + { + /* Move to white space (really non-identifer). */ + if (isident (rl_line_buffer[rl_point])) + { + while (isident (rl_line_buffer[rl_point]) && rl_point < rl_end) + rl_point++; + } + else /* if (!whitespace (rl_line_buffer[rl_point])) */ + { + while (!isident (rl_line_buffer[rl_point]) && + !whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + rl_point++; + } + + /* Move past whitespace. */ + while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + rl_point++; + } + return (0); +} + +int +rl_vi_bword (count) + int count; +{ + while (count-- && rl_point > 0) + { + int last_is_ident; + + /* If we are at the start of a word, move back to whitespace + so we will go back to the start of the previous word. */ + if (!whitespace (rl_line_buffer[rl_point]) && + whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + /* If this character and the previous character are `opposite', move + back so we don't get messed up by the rl_point++ down there in + the while loop. Without this code, words like `l;' screw up the + function. */ + last_is_ident = isident (rl_line_buffer[rl_point - 1]); + if ((isident (rl_line_buffer[rl_point]) && !last_is_ident) || + (!isident (rl_line_buffer[rl_point]) && last_is_ident)) + rl_point--; + + while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) + rl_point--; + + if (rl_point > 0) + { + if (isident (rl_line_buffer[rl_point])) + while (--rl_point >= 0 && isident (rl_line_buffer[rl_point])); + else + while (--rl_point >= 0 && !isident (rl_line_buffer[rl_point]) && + !whitespace (rl_line_buffer[rl_point])); + rl_point++; + } + } + return (0); +} + +int +rl_vi_eword (count) + int count; +{ + while (count-- && rl_point < rl_end - 1) + { + if (!whitespace (rl_line_buffer[rl_point])) + rl_point++; + + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + rl_point++; + + if (rl_point < rl_end) + { + if (isident (rl_line_buffer[rl_point])) + while (++rl_point < rl_end && isident (rl_line_buffer[rl_point])); + else + while (++rl_point < rl_end && !isident (rl_line_buffer[rl_point]) + && !whitespace (rl_line_buffer[rl_point])); + } + rl_point--; + } + return (0); +} + +int +rl_vi_insert_beg (count, key) + int count, key; +{ + rl_beg_of_line (1, key); + rl_vi_insertion_mode (1, key); + return (0); +} + +int +rl_vi_append_mode (count, key) + int count, key; +{ + if (rl_point < rl_end) + rl_point++; + rl_vi_insertion_mode (1, key); + return (0); +} + +int +rl_vi_append_eol (count, key) + int count, key; +{ + rl_end_of_line (1, key); + rl_vi_append_mode (1, key); + return (0); +} + +/* What to do in the case of C-d. */ +int +rl_vi_eof_maybe (count, c) + int count, c; +{ + return (rl_newline (1, '\n')); +} + +/* Insertion mode stuff. */ + +/* Switching from one mode to the other really just involves + switching keymaps. */ +int +rl_vi_insertion_mode (count, key) + int count, key; +{ + _rl_keymap = vi_insertion_keymap; + _rl_vi_last_key_before_insert = key; + return (0); +} + +static void +_rl_vi_save_insert (up) + UNDO_LIST *up; +{ + int len, start, end; + + if (up == 0) + { + if (vi_insert_buffer_size >= 1) + vi_insert_buffer[0] = '\0'; + return; + } + + start = up->start; + end = up->end; + len = end - start + 1; + if (len >= vi_insert_buffer_size) + { + vi_insert_buffer_size += (len + 32) - (len % 32); + vi_insert_buffer = xrealloc (vi_insert_buffer, vi_insert_buffer_size); + } + strncpy (vi_insert_buffer, rl_line_buffer + start, len - 1); + vi_insert_buffer[len-1] = '\0'; +} + +void +_rl_vi_done_inserting () +{ + if (_rl_vi_doing_insert) + { + rl_end_undo_group (); + /* Now, the text between rl_undo_list->next->start and + rl_undo_list->next->end is what was inserted while in insert + mode. It gets copied to VI_INSERT_BUFFER because it depends + on absolute indices into the line which may change (though they + probably will not). */ + _rl_vi_doing_insert = 0; + _rl_vi_save_insert (rl_undo_list->next); + vi_continued_command = 1; + } + else + { + if (_rl_vi_last_key_before_insert == 'i' && rl_undo_list) + _rl_vi_save_insert (rl_undo_list); + /* XXX - Other keys probably need to be checked. */ + else if (_rl_vi_last_key_before_insert == 'C') + rl_end_undo_group (); + while (_rl_undo_group_level > 0) + rl_end_undo_group (); + vi_continued_command = 0; + } +} + +int +rl_vi_movement_mode (count, key) + int count, key; +{ + if (rl_point > 0) + rl_backward (1, key); + + _rl_keymap = vi_movement_keymap; + _rl_vi_done_inserting (); + return (0); +} + +int +rl_vi_arg_digit (count, c) + int count, c; +{ + if (c == '0' && rl_numeric_arg == 1 && !rl_explicit_arg) + return (rl_beg_of_line (1, c)); + else + return (rl_digit_argument (count, c)); +} + +int +rl_vi_change_case (count, ignore) + int count, ignore; +{ + char c = 0; + + /* Don't try this on an empty line. */ + if (rl_point >= rl_end) + return (0); + + while (count-- && rl_point < rl_end) + { + if (_rl_uppercase_p (rl_line_buffer[rl_point])) + c = _rl_to_lower (rl_line_buffer[rl_point]); + else if (_rl_lowercase_p (rl_line_buffer[rl_point])) + c = _rl_to_upper (rl_line_buffer[rl_point]); + else + { + /* Just skip over characters neither upper nor lower case. */ + rl_forward (1, c); + continue; + } + + /* Vi is kind of strange here. */ + if (c) + { + rl_begin_undo_group (); + rl_delete (1, c); + rl_insert (1, c); + rl_end_undo_group (); + rl_vi_check (); + } + else + rl_forward (1, c); + } + return (0); +} + +int +rl_vi_put (count, key) + int count, key; +{ + if (!_rl_uppercase_p (key) && (rl_point + 1 <= rl_end)) + rl_point++; + + rl_yank (); + rl_backward (1, key); + return (0); +} + +int +rl_vi_check () +{ + if (rl_point && rl_point == rl_end) + rl_point--; + return (0); +} + +int +rl_vi_column (count, key) + int count, key; +{ + if (count > rl_end) + rl_end_of_line (1, key); + else + rl_point = count - 1; + return (0); +} + +int +rl_vi_domove (key, nextkey) + int key, *nextkey; +{ + int c, save; + int old_end; + + rl_mark = rl_point; + c = rl_read_key (); + *nextkey = c; + + if (!member (c, vi_motion)) + { + if (_rl_digit_p (c)) + { + save = rl_numeric_arg; + rl_numeric_arg = _rl_digit_value (c); + rl_digit_loop1 (); + rl_numeric_arg *= save; + c = rl_read_key (); /* real command */ + *nextkey = c; + } + else if (key == c && (key == 'd' || key == 'y' || key == 'c')) + { + rl_mark = rl_end; + rl_beg_of_line (1, c); + _rl_vi_last_motion = c; + return (0); + } + else + return (-1); + } + + _rl_vi_last_motion = c; + + /* Append a blank character temporarily so that the motion routines + work right at the end of the line. */ + old_end = rl_end; + rl_line_buffer[rl_end++] = ' '; + rl_line_buffer[rl_end] = '\0'; + + _rl_dispatch (c, _rl_keymap); + + /* Remove the blank that we added. */ + rl_end = old_end; + rl_line_buffer[rl_end] = '\0'; + if (rl_point > rl_end) + rl_point = rl_end; + + /* No change in position means the command failed. */ + if (rl_mark == rl_point) + return (-1); + + /* rl_vi_f[wW]ord () leaves the cursor on the first character of the next + word. If we are not at the end of the line, and we are on a + non-whitespace character, move back one (presumably to whitespace). */ + if ((_rl_to_upper (c) == 'W') && rl_point < rl_end && rl_point > rl_mark && + !whitespace (rl_line_buffer[rl_point])) + rl_point--; + + /* If cw or cW, back up to the end of a word, so the behaviour of ce + or cE is the actual result. Brute-force, no subtlety. */ + if (key == 'c' && rl_point >= rl_mark && (_rl_to_upper (c) == 'W')) + { + /* Don't move farther back than where we started. */ + while (rl_point > rl_mark && whitespace (rl_line_buffer[rl_point])) + rl_point--; + + /* Posix.2 says that if cw or cW moves the cursor towards the end of + the line, the character under the cursor should be deleted. */ + if (rl_point == rl_mark) + rl_point++; + else + { + /* Move past the end of the word so that the kill doesn't + remove the last letter of the previous word. Only do this + if we are not at the end of the line. */ + if (rl_point >= 0 && rl_point < (rl_end - 1) && !whitespace (rl_line_buffer[rl_point])) + rl_point++; + } + } + + if (rl_mark < rl_point) + exchange (rl_point, rl_mark); + + return (0); +} + +/* A simplified loop for vi. Don't dispatch key at end. + Don't recognize minus sign? */ +static int +rl_digit_loop1 () +{ + int key, c; + + while (1) + { + rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg, 0); + key = c = rl_read_key (); + + if (_rl_keymap[c].type == ISFUNC && + _rl_keymap[c].function == rl_universal_argument) + { + rl_numeric_arg *= 4; + continue; + } + + c = UNMETA (c); + if (_rl_digit_p (c)) + { + if (rl_explicit_arg) + rl_numeric_arg = (rl_numeric_arg * 10) + _rl_digit_value (c); + else + rl_numeric_arg = _rl_digit_value (c); + rl_explicit_arg = 1; + } + else + { + rl_clear_message (); + rl_stuff_char (key); + break; + } + } + return (0); +} + +int +rl_vi_delete_to (count, key) + int count, key; +{ + int c; + + if (_rl_uppercase_p (key)) + rl_stuff_char ('$'); + else if (vi_redoing) + rl_stuff_char (_rl_vi_last_motion); + + if (rl_vi_domove (key, &c)) + { + ding (); + return -1; + } + + /* These are the motion commands that do not require adjusting the + mark. */ + if ((strchr (" l|h^0bB", c) == 0) && (rl_mark < rl_end)) + rl_mark++; + + rl_kill_text (rl_point, rl_mark); + return (0); +} + +int +rl_vi_change_to (count, key) + int count, key; +{ + int c, start_pos; + + if (_rl_uppercase_p (key)) + rl_stuff_char ('$'); + else if (vi_redoing) + rl_stuff_char (_rl_vi_last_motion); + + start_pos = rl_point; + + if (rl_vi_domove (key, &c)) + { + ding (); + return -1; + } + + /* These are the motion commands that do not require adjusting the + mark. c[wW] are handled by special-case code in rl_vi_domove(), + and already leave the mark at the correct location. */ + if ((strchr (" l|hwW^0bB", c) == 0) && (rl_mark < rl_end)) + rl_mark++; + + /* The cursor never moves with c[wW]. */ + if ((_rl_to_upper (c) == 'W') && rl_point < start_pos) + rl_point = start_pos; + + if (vi_redoing) + { + if (vi_insert_buffer && *vi_insert_buffer) + rl_begin_undo_group (); + rl_delete_text (rl_point, rl_mark); + if (vi_insert_buffer && *vi_insert_buffer) + { + rl_insert_text (vi_insert_buffer); + rl_end_undo_group (); + } + } + else + { + rl_begin_undo_group (); /* to make the `u' command work */ + rl_kill_text (rl_point, rl_mark); + /* `C' does not save the text inserted for undoing or redoing. */ + if (_rl_uppercase_p (key) == 0) + _rl_vi_doing_insert = 1; + _rl_vi_set_last (key, count, rl_arg_sign); + rl_vi_insertion_mode (1, key); + } + + return (0); +} + +int +rl_vi_yank_to (count, key) + int count, key; +{ + int c, save = rl_point; + + if (_rl_uppercase_p (key)) + rl_stuff_char ('$'); + + if (rl_vi_domove (key, &c)) + { + ding (); + return -1; + } + + /* These are the motion commands that do not require adjusting the + mark. */ + if ((strchr (" l|h^0%bB", c) == 0) && (rl_mark < rl_end)) + rl_mark++; + + rl_begin_undo_group (); + rl_kill_text (rl_point, rl_mark); + rl_end_undo_group (); + rl_do_undo (); + rl_point = save; + + return (0); +} + +int +rl_vi_delete (count, key) + int count, key; +{ + int end; + + if (rl_end == 0) + { + ding (); + return -1; + } + + end = rl_point + count; + + if (end >= rl_end) + end = rl_end; + + rl_kill_text (rl_point, end); + + if (rl_point > 0 && rl_point == rl_end) + rl_backward (1, key); + return (0); +} + +int +rl_vi_back_to_indent (count, key) + int count, key; +{ + rl_beg_of_line (1, key); + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + rl_point++; + return (0); +} + +int +rl_vi_first_print (count, key) + int count, key; +{ + return (rl_vi_back_to_indent (1, key)); +} + +int +rl_vi_char_search (count, key) + int count, key; +{ + static char target; + static int orig_dir, dir; + + if (key == ';' || key == ',') + dir = key == ';' ? orig_dir : -orig_dir; + else + { + if (vi_redoing) + target = _rl_vi_last_search_char; + else + _rl_vi_last_search_char = target = rl_getc (rl_instream); + + switch (key) + { + case 't': + orig_dir = dir = FTO; + break; + + case 'T': + orig_dir = dir = BTO; + break; + + case 'f': + orig_dir = dir = FFIND; + break; + + case 'F': + orig_dir = dir = BFIND; + break; + } + } + + return (_rl_char_search_internal (count, dir, target)); +} + +/* Match brackets */ +int +rl_vi_match (ignore, key) + int ignore, key; +{ + int count = 1, brack, pos; + + pos = rl_point; + if ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0) + { + while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0 && + rl_point < rl_end - 1) + rl_forward (1, key); + + if (brack <= 0) + { + rl_point = pos; + ding (); + return -1; + } + } + + pos = rl_point; + + if (brack < 0) + { + while (count) + { + if (--pos >= 0) + { + int b = rl_vi_bracktype (rl_line_buffer[pos]); + if (b == -brack) + count--; + else if (b == brack) + count++; + } + else + { + ding (); + return -1; + } + } + } + else + { /* brack > 0 */ + while (count) + { + if (++pos < rl_end) + { + int b = rl_vi_bracktype (rl_line_buffer[pos]); + if (b == -brack) + count--; + else if (b == brack) + count++; + } + else + { + ding (); + return -1; + } + } + } + rl_point = pos; + return (0); +} + +int +rl_vi_bracktype (c) + int c; +{ + switch (c) + { + case '(': return 1; + case ')': return -1; + case '[': return 2; + case ']': return -2; + case '{': return 3; + case '}': return -3; + default: return 0; + } +} + +int +rl_vi_change_char (count, key) + int count, key; +{ + int c; + + if (vi_redoing) + c = _rl_vi_last_replacement; + else + _rl_vi_last_replacement = c = rl_getc (rl_instream); + + if (c == '\033' || c == CTRL ('C')) + return -1; + + while (count-- && rl_point < rl_end) + { + rl_begin_undo_group (); + + rl_delete (1, c); + rl_insert (1, c); + if (count == 0) + rl_backward (1, c); + + rl_end_undo_group (); + } + return (0); +} + +int +rl_vi_subst (count, key) + int count, key; +{ + rl_begin_undo_group (); + + if (_rl_uppercase_p (key)) + { + rl_beg_of_line (1, key); + rl_kill_line (1, key); + } + else + rl_delete_text (rl_point, rl_point+count); + + rl_end_undo_group (); + + _rl_vi_set_last (key, count, rl_arg_sign); + + if (vi_redoing) + { + int o = _rl_doing_an_undo; + + _rl_doing_an_undo = 1; + if (vi_insert_buffer && *vi_insert_buffer) + rl_insert_text (vi_insert_buffer); + _rl_doing_an_undo = o; + } + else + { + rl_begin_undo_group (); + _rl_vi_doing_insert = 1; + rl_vi_insertion_mode (1, key); + } + + return (0); +} + +int +rl_vi_overstrike (count, key) + int count, key; +{ + int i; + + if (_rl_vi_doing_insert == 0) + { + _rl_vi_doing_insert = 1; + rl_begin_undo_group (); + } + + for (i = 0; i < count; i++) + { + vi_replace_count++; + rl_begin_undo_group (); + + if (rl_point < rl_end) + { + rl_delete (1, key); + rl_insert (1, key); + } + else + rl_insert (1, key); + + rl_end_undo_group (); + } + return (0); +} + +int +rl_vi_overstrike_delete (count, key) + int count, key; +{ + int i, s; + + for (i = 0; i < count; i++) + { + if (vi_replace_count == 0) + { + ding (); + break; + } + s = rl_point; + + if (rl_do_undo ()) + vi_replace_count--; + + if (rl_point == s) + rl_backward (1, key); + } + + if (vi_replace_count == 0 && _rl_vi_doing_insert) + { + rl_end_undo_group (); + rl_do_undo (); + _rl_vi_doing_insert = 0; + } + return (0); +} + +int +rl_vi_replace (count, key) + int count, key; +{ + int i; + + vi_replace_count = 0; + + if (!vi_replace_map) + { + vi_replace_map = rl_make_bare_keymap (); + + for (i = ' '; i < KEYMAP_SIZE; i++) + vi_replace_map[i].function = rl_vi_overstrike; + + vi_replace_map[RUBOUT].function = rl_vi_overstrike_delete; + vi_replace_map[ESC].function = rl_vi_movement_mode; + vi_replace_map[RETURN].function = rl_newline; + vi_replace_map[NEWLINE].function = rl_newline; + + /* If the normal vi insertion keymap has ^H bound to erase, do the + same here. Probably should remove the assignment to RUBOUT up + there, but I don't think it will make a difference in real life. */ + if (vi_insertion_keymap[CTRL ('H')].type == ISFUNC && + vi_insertion_keymap[CTRL ('H')].function == rl_rubout) + vi_replace_map[CTRL ('H')].function = rl_vi_overstrike_delete; + + } + _rl_keymap = vi_replace_map; + return (0); +} + +#if 0 +/* Try to complete the word we are standing on or the word that ends with + the previous character. A space matches everything. Word delimiters are + space and ;. */ +int +rl_vi_possible_completions() +{ + int save_pos = rl_point; + + if (rl_line_buffer[rl_point] != ' ' && rl_line_buffer[rl_point] != ';') + { + while (rl_point < rl_end && rl_line_buffer[rl_point] != ' ' && + rl_line_buffer[rl_point] != ';') + rl_point++; + } + else if (rl_line_buffer[rl_point - 1] == ';') + { + ding (); + return (0); + } + + rl_possible_completions (); + rl_point = save_pos; + + return (0); +} +#endif + +/* Functions to save and restore marks. */ +int +rl_vi_set_mark (count, key) + int count, key; +{ + int ch; + + ch = rl_read_key (); + if (_rl_lowercase_p (ch) == 0) + { + ding (); + return -1; + } + ch -= 'a'; + vi_mark_chars[ch] = rl_point; + return 0; +} + +int +rl_vi_goto_mark (count, key) + int count, key; +{ + int ch; + + ch = rl_read_key (); + if (ch == '`') + { + rl_point = rl_mark; + return 0; + } + else if (_rl_lowercase_p (ch) == 0) + { + ding (); + return -1; + } + + ch -= 'a'; + if (vi_mark_chars[ch] == -1) + { + ding (); + return -1; + } + rl_point = vi_mark_chars[ch]; + return 0; +} + +#endif /* VI_MODE */ diff --git a/readline/xmalloc.c b/readline/xmalloc.c new file mode 100644 index 00000000000..4160651191b --- /dev/null +++ b/readline/xmalloc.c @@ -0,0 +1,87 @@ +/* xmalloc.c -- safe versions of malloc and realloc */ + +/* Copyright (C) 1991 Free Software Foundation, Inc. + + This file is part of GNU Readline, a library for reading lines + of text with interactive input and history editing. + + Readline is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 1, or (at your option) any + later version. + + Readline is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline; see the file COPYING. If not, write to the Free + Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#if defined (HAVE_CONFIG_H) +#include <config.h> +#endif + +#include <stdio.h> + +#if defined (HAVE_STDLIB_H) +# include <stdlib.h> +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +static void memory_error_and_abort (); + +/* **************************************************************** */ +/* */ +/* Memory Allocation and Deallocation. */ +/* */ +/* **************************************************************** */ + +/* Return a pointer to free()able block of memory large enough + to hold BYTES number of bytes. If the memory cannot be allocated, + print an error message and abort. */ +char * +xmalloc (bytes) + int bytes; +{ + char *temp; + + temp = (char *)malloc (bytes); + if (temp == 0) + memory_error_and_abort ("xmalloc"); + return (temp); +} + +char * +xrealloc (pointer, bytes) + char *pointer; + int bytes; +{ + char *temp; + + temp = pointer ? (char *)realloc (pointer, bytes) : (char *)malloc (bytes); + + if (temp == 0) + memory_error_and_abort ("xrealloc"); + return (temp); +} + +static void +memory_error_and_abort (fname) + char *fname; +{ + fprintf (stderr, "%s: out of virtual memory\n", fname); + exit (2); +} + +/* Use this as the function to call when adding unwind protects so we + don't need to know what free() returns. */ +void +xfree (string) + char *string; +{ + if (string) + free (string); +} |