diff options
Diffstat (limited to 'sim/testsuite/d10v-elf')
25 files changed, 1921 insertions, 0 deletions
diff --git a/sim/testsuite/d10v-elf/ChangeLog b/sim/testsuite/d10v-elf/ChangeLog new file mode 100644 index 00000000000..b3b7f8cfac9 --- /dev/null +++ b/sim/testsuite/d10v-elf/ChangeLog @@ -0,0 +1,84 @@ +1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com) + + * t-sadd.s: New file. + * Makefile.in (TESTS): Add t-sadd. + +Mon Feb 16 09:20:57 1998 Andrew Cagney <cagney@b1.cygnus.com> + + * t-macros.i (VEC_*): Define. + (DMAP_REG, DMAP_BASE, DMAP_MASK): Define. + (IMAP[01]_REG): Define. + + * t-rdt.s (test_tdt): New file. + + * t-dbt.s (test_dbt): New file. + + * Makefile.in (TESTS): Add t-rdt and t-dbt. + + +Fri Feb 13 16:21:13 1998 Andrew Cagney <cagney@b1.cygnus.com> + + * t-sp.s: New test. + * Makefile.in (TESTS): Update. + +Wed Feb 11 17:58:50 1998 Andrew Cagney <cagney@b1.cygnus.com> + + * t-macros.i: Update trap calls, func in r4, args in + r0... + (start): Force r0 to zero. + + * t-sub2w.s: Ditto. + +Tue Dec 9 10:41:44 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-rte.s (success): New file. + * Makefile.in: Update. + + * t-rep.s: Check rep repeats correct number of times. + +Fri Dec 5 10:11:18 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-mvtc.s: Check for stuck-zero in MOD_E, MOD_S. + + * t-trap.s: New file. + * Makefile.in (TESTS): Update. + +Thu Dec 4 16:56:55 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-macros.i: Add definitions for PSW bits. + + * t-mvtc.s: New file. + * Makefile.in (TESTS): Update. + +Wed Dec 3 16:35:24 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-rac.s: New files. + + * t-macros.i: Add macros for checking psw and 2w quantities. + + * Makefile.in (TESTS): Update. + +Tue Dec 2 11:01:36 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-sub2w.s, t-mulxu.s, t-mac.s, t-mvtac.s, t-msbu.s, t-sub.s: New + files. + + * Makefile.in: Update. + +Mon Nov 17 20:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-subi.s (test_subi): New file. + * Makefile.in: Update. + +Fri Nov 14 14:06:06 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-rep.s: New file. Test case of branch to RPT_E address. + +Mon Nov 10 19:21:26 1997 Andrew Cagney <cagney@b1.cygnus.com> + + * t-macros.i (_start): New file. + * t-rachi.s: New file. + + * Makefile.in (RUN_FOR_TARGET): Look for simulator in d10v + directory. + diff --git a/sim/testsuite/d10v-elf/Makefile.in b/sim/testsuite/d10v-elf/Makefile.in new file mode 100644 index 00000000000..09d59ac7565 --- /dev/null +++ b/sim/testsuite/d10v-elf/Makefile.in @@ -0,0 +1,150 @@ +# Makefile for regression testing the GNU debugger. +# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc. + +# This file is part of GDB. + +# GDB is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# GDB is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +VPATH = @srcdir@ +srcdir = @srcdir@ +srcroot = $(srcdir)/.. + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +host_alias = @host_alias@ +target_alias = @target_alias@ +program_transform_name = @program_transform_name@ +build_canonical = @build@ +host_canonical = @host@ +target_canonical = @target@ +target_cpu = @target_cpu@ + + +SHELL = /bin/sh +SUBDIRS = @subdirs@ +RPATH_ENVVAR = @RPATH_ENVVAR@ + +TESTS = \ + exit47.ko \ + hello.hi \ + t-dbt.ok \ + t-mac.ok \ + t-mvtac.ok \ + t-mvtc.ok \ + t-msbu.ok \ + t-mulxu.ok \ + t-rac.ok \ + t-rachi.ok \ + t-rdt.ok \ + t-rep.ok \ + t-rte.ok \ + t-sadd.ok \ + t-sp.ok \ + t-sub2w.ok \ + t-sub.ok \ + t-subi.ok \ +# + +AS_FOR_TARGET = `\ + if [ -x ../../../gas/as-new ]; then \ + echo ../../../gas/as-new ; \ + else \ + echo $(target_alias)-as ; \ + fi` + +LD_FOR_TARGET = `\ + if [ -x ../../../ld/ld-new ]; then \ + echo ../../../ld/ld-new ; \ + else \ + echo $(target_alias)-ld ; \ + fi` + +RUN_FOR_TARGET = `\ + if [ -x ../../../sim/d10v/run ]; then \ + echo ../../../sim/d10v/run ; \ + else \ + echo $(target_alias)-run ; \ + fi` + + +check: sanity $(TESTS) +sanity: + @eval echo AS_FOR_TARGET=$(AS_FOR_TARGET) + @eval echo LD_FOR_TARGET=$(LD_FOR_TARGET) + @eval echo RUN_FOR_TARGET=$(RUN_FOR_TARGET) + +clean: + rm -f $(TESTS) + rm -f *.run *.o + rm -f core *.core + +# Rules for running the tests + +.SUFFIXES: .ok .run .hi .ko .ti +.run.ok: + rm -f tmp-$* $*.hi + ulimit -t 5 ; \ + $(RUN_FOR_TARGET) $(RUNFLAGS_FOR_TARGET) $*.run > tmp-$* + mv tmp-$* $*.ok +.run.hi: + rm -f tmp-$* $*.hi diff-$* + ulimit -t 5 ; \ + $(RUN_FOR_TARGET) $(RUNFLAGS_FOR_TARGET) $*.run > tmp-$* + echo 'Hello World!' | diff - tmp-$* > diff-$* + cat tmp-$* diff-$* > $*.hi +.run.ko: + rm -f tmp-$* $*.ko + set +e ; \ + ulimit -t 5 ; \ + $(RUN_FOR_TARGET) $(RUNFLAGS_FOR_TARGET) $*.run > tmp-$* ; \ + if [ $$? -eq 47 ] ; then \ + exit 0 ; \ + else \ + exit 1 ; \ + fi + mv tmp-$* $*.ko +.run.ti: + rm -f tmp-$* $*.ti + set +e ; \ + ulimit -t 5 ; \ + $(RUN_FOR_TARGET) $(RUNFLAGS_FOR_TARGET) $(INTFLAGS_FOR_TARGET) $*.run > tmp-$* + test `cat tmp-$* | wc -l` -eq 10 < /dev/null + test `grep Tick tmp-$* | wc -l` -eq 10 < /dev/null + mv tmp-$* $*.ti + + +# Rules for building the test +# Preference is for obtaining the executable (.run) from a prebuilt image + +.SUFFIXES: .uue .s .S .run +.uue.run: + head $* | grep $*.run > /dev/null + uudecode $*.uue +.run.u: + uuencode < $*.run $*.run > $*.u +.o.run: + $(LD_FOR_TARGET) $(LDFLAGS_FOR_TARGET) -o $*.run $*.o +.s.o: + $(AS_FOR_TARGET) $(ASFLAGS_FOR_TARGET) -I$(srcdir) $(srcdir)/$*.s -o $*.o +.S.o: + $(AS_FOR_TARGET) $(ASFLAGS_FOR_TARGET) -I$(srcdir) $(srcdir)/$*.S -o $*.o + + +Makefile: Makefile.in config.status + $(SHELL) ./config.status + +config.status: configure + $(SHELL) ./config.status --recheck diff --git a/sim/testsuite/d10v-elf/configure b/sim/testsuite/d10v-elf/configure new file mode 100755 index 00000000000..b9348bb1255 --- /dev/null +++ b/sim/testsuite/d10v-elf/configure @@ -0,0 +1,900 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.12 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.12" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=Makefile.in + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +CC=${CC-cc} + +ac_aux_dir= +for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +# Do some error checking and defaulting for the host and target type. +# The inputs are: +# configure --host=HOST --target=TARGET --build=BUILD NONOPT +# +# The rules are: +# 1. You are not allowed to specify --host, --target, and nonopt at the +# same time. +# 2. Host defaults to nonopt. +# 3. If nonopt is not specified, then host defaults to the current host, +# as determined by config.guess. +# 4. Target and build default to nonopt. +# 5. If nonopt is not specified, then target and build default to host. + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +case $host---$target---$nonopt in +NONE---*---* | *---NONE---* | *---*---NONE) ;; +*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; +esac + + +# Make sure we can run config.sub. +if $ac_config_sub sun4 >/dev/null 2>&1; then : +else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } +fi + +echo $ac_n "checking host system type""... $ac_c" 1>&6 +echo "configure:572: checking host system type" >&5 + +host_alias=$host +case "$host_alias" in +NONE) + case $nonopt in + NONE) + if host_alias=`$ac_config_guess`; then : + else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } + fi ;; + *) host_alias=$nonopt ;; + esac ;; +esac + +host=`$ac_config_sub $host_alias` +host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$host" 1>&6 + +echo $ac_n "checking target system type""... $ac_c" 1>&6 +echo "configure:593: checking target system type" >&5 + +target_alias=$target +case "$target_alias" in +NONE) + case $nonopt in + NONE) target_alias=$host_alias ;; + *) target_alias=$nonopt ;; + esac ;; +esac + +target=`$ac_config_sub $target_alias` +target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$target" 1>&6 + +echo $ac_n "checking build system type""... $ac_c" 1>&6 +echo "configure:611: checking build system type" >&5 + +build_alias=$build +case "$build_alias" in +NONE) + case $nonopt in + NONE) build_alias=$host_alias ;; + *) build_alias=$nonopt ;; + esac ;; +esac + +build=`$ac_config_sub $build_alias` +build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` +echo "$ac_t""$build" 1>&6 + +test "$host_alias" != "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + + + + + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS <<EOF +#! /bin/sh +# Generated automatically by configure. +# Run this file to recreate the current configuration. +# This directory was configured as follows, +# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.12" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS <<EOF + +# Protect against being on the right side of a sed subst in config.status. +sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; + s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g +s%@CC@%$CC%g +s%@host@%$host%g +s%@host_alias@%$host_alias%g +s%@host_cpu@%$host_cpu%g +s%@host_vendor@%$host_vendor%g +s%@host_os@%$host_os%g +s%@target@%$target%g +s%@target_alias@%$target_alias%g +s%@target_cpu@%$target_cpu%g +s%@target_vendor@%$target_vendor%g +s%@target_os@%$target_os%g +s%@build@%$build%g +s%@build_alias@%$build_alias%g +s%@build_cpu@%$build_cpu%g +s%@build_vendor@%$build_vendor%g +s%@build_os@%$build_os%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <<EOF + +CONFIG_FILES=\${CONFIG_FILES-"Makefile"} +EOF +cat >> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <<EOF + +EOF +cat >> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff --git a/sim/testsuite/d10v-elf/configure.in b/sim/testsuite/d10v-elf/configure.in new file mode 100644 index 00000000000..e74389e551e --- /dev/null +++ b/sim/testsuite/d10v-elf/configure.in @@ -0,0 +1,19 @@ +dnl Process this file file with autoconf to produce a configure script. +dnl This file is a shell script fragment that supplies the information +dnl necessary to tailor a template configure script into the configure +dnl script appropriate for this directory. For more information, check +dnl any existing configure script. + +AC_PREREQ(2.5) +dnl FIXME - think of a truly uniq file to this directory +AC_INIT(Makefile.in) + +CC=${CC-cc} +AC_SUBST(CC) +AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..) +AC_CANONICAL_SYSTEM + +AC_SUBST(target_cpu) + + +AC_OUTPUT(Makefile) diff --git a/sim/testsuite/d10v-elf/exit47.s b/sim/testsuite/d10v-elf/exit47.s new file mode 100644 index 00000000000..93e466465e2 --- /dev/null +++ b/sim/testsuite/d10v-elf/exit47.s @@ -0,0 +1,4 @@ +.include "t-macros.i" + + start + exit47 diff --git a/sim/testsuite/d10v-elf/hello.s b/sim/testsuite/d10v-elf/hello.s new file mode 100644 index 00000000000..d060c89adb0 --- /dev/null +++ b/sim/testsuite/d10v-elf/hello.s @@ -0,0 +1,5 @@ + .include "t-macros.i" + + start + hello + exit0 diff --git a/sim/testsuite/d10v-elf/loop.s b/sim/testsuite/d10v-elf/loop.s new file mode 100644 index 00000000000..e1371e4d951 --- /dev/null +++ b/sim/testsuite/d10v-elf/loop.s @@ -0,0 +1,6 @@ + .text + .globl _start + +_start: + bra _start + nop diff --git a/sim/testsuite/d10v-elf/t-dbt.s b/sim/testsuite/d10v-elf/t-dbt.s new file mode 100644 index 00000000000..8c518475be7 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-dbt.s @@ -0,0 +1,33 @@ +.include "t-macros.i" + + start + + PSW_BITS = PSW_DM + +;;; Blat our DMAP registers so that they point at on-chip imem + + ldi r2, MAP_INSN | 0xf + st r2, @(DMAP_REG,r0) + ldi r2, MAP_INSN + st r2, @(IMAP1_REG,r0) + +;;; Patch the interrupt vector's dbt entry with a jmp to success + + ldi r4, #trap + ldi r5, (VEC_DBT & DMAP_MASK) + DMAP_BASE + ld2w r2, @(0,r4) + st2w r2, @(0,r5) + ld2w r2, @(4,r4) + st2w r2, @(4,r5) + +test_dbt: + dbt -> nop + exit47 + +success: + checkpsw2 1 PSW_BITS + exit0 + + .data +trap: ldi r1, success@word + jmp r1 diff --git a/sim/testsuite/d10v-elf/t-mac.s b/sim/testsuite/d10v-elf/t-mac.s new file mode 100644 index 00000000000..364f61531d1 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-mac.s @@ -0,0 +1,71 @@ +.include "t-macros.i" + + start + + ;; clear FX + loadpsw2 0x8005 + loadacc2 a1 0x7f 0xffff 0xffff + load r8 0xffff + load r9 0x8001 +test_macu1: + MACU a1, r9, r8 + checkacc2 1 a1 0x80 0x8000 0x7FFE + + ;; set FX + loadpsw2 0x8085 + loadacc2 a1 0x7f 0xffff 0xffff + load r8 0xffff + load r9 0x8001 +test_macu2: + MACU a1, r9, r8 + checkacc2 2 a1 0x81 0x0000 0xfffd + + + + + ;; clear FX + ldi r2, #0x8005 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, #0xffff + ldi r9, #0x7FFF +test_macsu1: + MACSU a1, r9, r8 + checkacc2 3 a1 0x80 0x7FFE 0x8000 + + ;; set FX + ldi r2, #0x8085 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, #0xffff + ldi r9, #0x7FFF +test_macsu2: + MACSU a1, r9, r8 + checkacc2 4 a1 0x80 0xfffd 0x0001 + + ;; clear FX + ldi r2, #0x8005 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, 0xffff + ldi r9, 0x8001 +test_macsu3: + MACSU a1, r9, r8 + checkacc2 5 a1 0x7F 0x8001 0x7FFE + + ;; set FX + ldi r2, #0x8085 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, #0xffff + ldi r9, #0x8001 +test_macsu4: + MACSU a1, r9, r8 + checkacc2 6 a1 0x7f 0x0002 0xFFFD + + exit0 + diff --git a/sim/testsuite/d10v-elf/t-macros.i b/sim/testsuite/d10v-elf/t-macros.i new file mode 100644 index 00000000000..2f54d1c0381 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-macros.i @@ -0,0 +1,170 @@ + .macro start + .text + .align 2 + .globl _start +_start: + ldi r0, 0 + .endm + + + .macro exit47 + ldi r4, 1 + ldi r0, 47 + trap 15 + .endm + + + .macro exit0 + ldi r4, 1 + ldi r0, 0 + trap 15 + .endm + + + .macro load reg val + ldi \reg, #\val + .endm + + + .macro load2w reg hi lo + ld2w \reg, @(1f,r0) + .data + .align 2 +1: .short \hi + .short \lo + .text + .endm + + + .macro check exit reg val + cmpeqi \reg, #\val + brf0t 1f +0: ldi r4, 1 + ldi r0, \exit + trap 15 +1: + .endm + + + .macro check2w2 exit reg hi lo + st2w \reg, @(1f,r0) + ld r2, @(1f, r0) + cmpeqi r2, #\hi + brf0f 0f + ld r2, @(1f + 2, r0) + cmpeqi r2, #\lo + brf0f 0f + bra 2f +0: ldi r4, 1 + ldi r0, \exit + trap 15 + .data + .align 2 +1: .long 0 + .text +2: + .endm + + + .macro loadacc2 acc guard hi lo + ldi r2, #\lo + mvtaclo r2, \acc + ldi r2, #\hi + mvtachi r2, \acc + ldi r2, #\guard + mvtacg r2, \acc + .endm + + + .macro checkacc2 exit acc guard hi lo + ldi r2, #\guard + mvfacg r3, \acc + cmpeq r2, r3 + brf0f 0f + ldi r2, #\hi + mvfachi r3, \acc + cmpeq r2, r3 + brf0f 0f + ldi r2, #\lo + mvfaclo r3, \acc + cmpeq r2, r3 + brf0f 0f + bra 4f +0: ldi r4, 1 + ldi r0, \exit + trap 15 +4: + .endm + + + .macro loadpsw2 val + ldi r2, #\val + mvtc r2, cr0 + .endm + + + .macro checkpsw2 exit val + mvfc r2, cr0 + cmpeqi r2, #\val + brf0t 1f + ldi r4, 1 + ldi r0, \exit + trap 15 +1: + .endm + + + .macro hello + ;; 4:write (1, string, strlen (string)) + ldi r4, 4 + ldi r0, 1 + ldi r1, 1f + ldi r2, 2f-1f-1 + trap 15 + .section .rodata +1: .string "Hello World!\n" +2: .align 2 + .text + .endm + + + PSW_SM = 0x8000 + PSW_01 = 0x4000 + PSW_EA = 0x2000 + PSW_DB = 0x1000 + PSW_DM = 0x0800 + PSW_IE = 0x0400 + PSW_RP = 0x0200 + PSW_MD = 0x0100 + PSW_FX = 0x0080 + PSW_ST = 0x0040 + PSW_10 = 0x0020 + PSW_11 = 0x0010 + PSW_F0 = 0x0008 + PSW_F1 = 0x0004 + PSW_14 = 0x0002 + PSW_C = 0x0001 + + +;;; + + DMAP_MASK = 0x3fff + DMAP_BASE = 0x8000 + DMAP_REG = 0xff04 + + IMAP0_REG = 0xff00 + IMAP1_REG = 0xff02 + + MAP_INSN = 0x1000 + +;;; + + VEC_RI = 0x3fc00 + VEC_BAE = 0x3fc04 + VEC_RIE = 0x3fc08 + VEC_AE = 0x3fc0c + VEC_TRAP = 0x3fc10 + VEC_DBT = 0x3ff50 + VEC_SDBT = 0x3fff4 + VEC_DBI = 0x3ff58 + VEC_EI = 0x3ff5c diff --git a/sim/testsuite/d10v-elf/t-msbu.s b/sim/testsuite/d10v-elf/t-msbu.s new file mode 100644 index 00000000000..04276cc25d9 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-msbu.s @@ -0,0 +1,28 @@ +.include "t-macros.i" + + start + + ;; clear FX + ldi r2, #0x8005 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, 0xffff + ldi r9, 0x8001 +test_msbu1: + MSBU a1, r9, r8 + checkacc2 1 a1 0X7F 0x7FFF 0x8000 + + + ;; set FX + ldi r2, #0x8085 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, 0xffff + ldi r9, 0x8001 +test_msbu2: + MSBU a1, r9, r8 + checkacc2 2 a1 0X7E 0xFFFF 0x0001 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-mulxu.s b/sim/testsuite/d10v-elf/t-mulxu.s new file mode 100644 index 00000000000..a8e6ffc8d49 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-mulxu.s @@ -0,0 +1,28 @@ +.include "t-macros.i" + + start + + ;; clear FX + ldi r2, #0x8005 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, 0xffff + ldi r9, 0x8001 +test_mulxu1: + MULXU a1, r9, r8 + checkacc2 1 a1 0x00 0x8000 0x7FFF + + + ;; set FX + ldi r2, #0x8085 + mvtc r2, cr0 + + loadacc2 a1 0x7f 0xffff 0xffff + ldi r8, 0xffff + ldi r9, 0x8001 +test_mulxu2: + MULXU a1, r9, r8 + checkacc2 2 a1 0x01 0x0000 0xFFFE + + exit0 diff --git a/sim/testsuite/d10v-elf/t-mvtac.s b/sim/testsuite/d10v-elf/t-mvtac.s new file mode 100644 index 00000000000..68452dc827a --- /dev/null +++ b/sim/testsuite/d10v-elf/t-mvtac.s @@ -0,0 +1,19 @@ +.include "t-macros.i" + + start + + ldi r8, 0xbeef + mvtaclo r8, a0 + checkacc2 1 a0 0xff 0xffff 0xbeef + + mvtacg r0, a0 + checkacc2 2 a0 0x00 0xffff 0xbeef + + ldi r8, 0xdead + mvtachi r8, a0 + checkacc2 3 a0 0xff 0xdead 0xbeef + + loadacc2 a1 0xfe 0xbeef 0xdead + checkacc2 4 a1 0xfe 0xbeef 0xdead + + exit0 diff --git a/sim/testsuite/d10v-elf/t-mvtc.s b/sim/testsuite/d10v-elf/t-mvtc.s new file mode 100644 index 00000000000..cbf9308444a --- /dev/null +++ b/sim/testsuite/d10v-elf/t-mvtc.s @@ -0,0 +1,81 @@ +.include "t-macros.i" + + start + +;;; Try out each bit in the PSW + + loadpsw2 PSW_SM + checkpsw2 1 PSW_SM + + loadpsw2 PSW_01 + checkpsw2 2 0 ;; PSW_01 + + loadpsw2 PSW_EA + checkpsw2 3 PSW_EA + + loadpsw2 PSW_DB + checkpsw2 4 PSW_DB + + loadpsw2 PSW_DM + checkpsw2 5 PSW_DM + + loadpsw2 PSW_IE + checkpsw2 6 PSW_IE + + loadpsw2 PSW_RP + checkpsw2 7 PSW_RP + + loadpsw2 PSW_MD + checkpsw2 8 PSW_MD + + loadpsw2 PSW_FX|PSW_ST + checkpsw2 9 PSW_FX|PSW_ST + + ;; loadpsw2 PSW_ST + ;; checkpsw2 10 + + loadpsw2 PSW_10 + checkpsw2 11 0 ;; PSW_10 + + loadpsw2 PSW_11 + checkpsw2 12 0 ;; PSW_11 + + loadpsw2 PSW_F0 + checkpsw2 13 PSW_F0 + + loadpsw2 PSW_F1 + checkpsw2 14 PSW_F1 + + loadpsw2 PSW_14 + checkpsw2 15 0 ;; PSW_14 + + loadpsw2 PSW_C + checkpsw2 16 PSW_C + + +;;; Check that bit 0 (LSB) of the MOD_E & MOD_S registers are stuck at ZERO. + + ldi r6, #0xdead + mvtc r6, cr10 + ldi r6, #0xbeef + mvtc r6, cr11 + + mvfc r7, cr10 + check 17 r7 0xdeac + mvfc r7, cr11 + check 18 r7 0xbeee + +;;; Check that certain bits of the DPSW and BPSW are hardwired to zero + + ldi r6, 0xffff + mvtc r6, bpsw + mvfc r7, bpsw + check 18 r7 0xbfcd + + ldi r6, 0xffff + mvtc r6, dpsw + mvfc r7, dpsw + check 18 r7 0xbfcd + + + exit0 diff --git a/sim/testsuite/d10v-elf/t-rac.s b/sim/testsuite/d10v-elf/t-rac.s new file mode 100644 index 00000000000..f2123116c64 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-rac.s @@ -0,0 +1,16 @@ +.include "t-macros.i" + + start + + ;; clear FX + loadpsw2 0x8004 + loadacc2 a0 0x80 0x0000 0x0000 + loadacc2 a1 0x00 0x0000 0x5000 + load r10 0x0123 + load r11 0x4567 +test_rac1: + RAC r10, a0, #-2 + checkpsw2 1 0x8008 + check2w2 2 r10 0x8000 0x0000 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-rachi.s b/sim/testsuite/d10v-elf/t-rachi.s new file mode 100644 index 00000000000..ed901959469 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-rachi.s @@ -0,0 +1,28 @@ +.include "t-macros.i" + + start + + loadacc2 a0 0x00 0x7FFF 0x8000 +test_rachi_1: + rachi r4, a0, 0 + check 1 r4 0x7FFF + + + loadacc2 a0 0xFF 0x8000 0x1000 +test_rachi_2: + rachi r4, a0, 0 + check 2 r4 0x8000 + + + loadacc2 a0 0x00 0x1000 0xA000 +test_rachi_3: + rachi r4, a0, 0 + check 3 r4 0x1001 + + + loadacc2 a0 0xFF 0xA000 0x7FFF +test_rachi_4: + rachi r4, a0, 0 + check 4 r4 0xa000 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-rdt.s b/sim/testsuite/d10v-elf/t-rdt.s new file mode 100644 index 00000000000..661b583bb13 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-rdt.s @@ -0,0 +1,18 @@ +.include "t-macros.i" + + start + + PSW_BITS = PSW_C|PSW_F0|PSW_F1 + + ldi r6, #success@word + mvtc r6, dpc + ldi r6, #PSW_BITS + mvtc r6, dpsw + +test_rdt: + RTD + exit47 + +success: + checkpsw2 1 PSW_BITS + exit0 diff --git a/sim/testsuite/d10v-elf/t-rep.s b/sim/testsuite/d10v-elf/t-rep.s new file mode 100644 index 00000000000..cea3ea8251d --- /dev/null +++ b/sim/testsuite/d10v-elf/t-rep.s @@ -0,0 +1,45 @@ +.include "t-macros.i" + + start + + + + ;; Check that the instruction @REP_E is executed when it + ;; is reached using a branch instruction + + ldi r2, 1 +test_rep_1: + rep r2, end_rep_1 + nop || nop + nop || nop + nop || nop + nop || nop + ldi r3, 46 + bra end_rep_1 + ldi r3, 42 +end_rep_1: + addi r3, 1 + + check 1 r3 47 + + + ;; Check that the loop is executed the correct number of times + + ldi r2, 10 + ldi r3, 0 + ldi r4, 0 +test_rep_2: + rep r2, end_rep_2 + nop || nop + nop || nop + nop || nop + nop || nop + nop || nop + addi r3, 1 +end_rep_2: + addi r4, 1 + + check 2 r3 10 + check 3 r4 10 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-rte.s b/sim/testsuite/d10v-elf/t-rte.s new file mode 100644 index 00000000000..5ce31ddbf41 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-rte.s @@ -0,0 +1,18 @@ +.include "t-macros.i" + + start + + PSW_BITS = PSW_C|PSW_F0|PSW_F1 + + ldi r6, #success@word + mvtc r6, bpc + ldi r6, #PSW_BITS + mvtc r6, bpsw + +test_rte: + RTE + exit47 + +success: + checkpsw2 1 PSW_BITS + exit0 diff --git a/sim/testsuite/d10v-elf/t-sadd.s b/sim/testsuite/d10v-elf/t-sadd.s new file mode 100644 index 00000000000..f3e4ebe3da4 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-sadd.s @@ -0,0 +1,38 @@ +.include "t-macros.i" + + start + + PSW_BITS = PSW_FX|PSW_ST|PSW_SM + loadpsw2 PSW_BITS + + ;; Test normal sadd + + loadacc2 a0 0x00 0x7fff 0xffff + loadacc2 a1 0xff 0x8000 0x0000 + sadd a1, a0 + checkacc2 1 a0 0x00 0x7fff 0xffff + checkacc2 2 a1 0xff 0x8000 0x7fff + + ;; Test overflow + + loadacc2 a0 0x00 0x0000 0x0000 + loadacc2 a1 0x01 0x8000 0x0000 + sadd a1, a0 + checkacc2 3 a0 0x00 0x0000 0x0000 + checkacc2 4 a1 0x00 0x7fff 0xffff + + loadacc2 a0 0x00 0xffff 0xffff + loadacc2 a1 0x00 0xffff 0xffff + sadd a1, a0 + checkacc2 5 a1 0x00 0x7fff 0xffff + checkacc2 6 a0 0x00 0xffff 0xffff + + ;; Test underflow + + loadacc2 a0 0x00 0x0000 0x0000 + loadacc2 a1 0x80 0x8000 0x0000 + sadd a1, a0 + checkacc2 7 a0 0x00 0x0000 0x0000 + checkacc2 8 a1 0xff 0x8000 0x0000 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-sp.s b/sim/testsuite/d10v-elf/t-sp.s new file mode 100644 index 00000000000..84f9ad48676 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-sp.s @@ -0,0 +1,17 @@ +.include "t-macros.i" + + start + +;;; Read/Write values to SPU/SPI + + loadpsw2 0 + ldi sp, 0xdead + loadpsw2 PSW_SM + ldi sp, 0xbeef + + loadpsw2 0 + check 1 sp 0xdead + loadpsw2 PSW_SM + check 2 sp 0xbeef + + exit0 diff --git a/sim/testsuite/d10v-elf/t-sub.s b/sim/testsuite/d10v-elf/t-sub.s new file mode 100644 index 00000000000..26d0a3a1c9a --- /dev/null +++ b/sim/testsuite/d10v-elf/t-sub.s @@ -0,0 +1,42 @@ +.include "t-macros.i" + + start + +;; The d10v implements negated addition for subtraction + + .macro check_sub s x y r c + ;; clear carry + ldi r6,#0x8004 + mvtc r6,cr0 + ;; subtract + ldi r10,#\x + ldi r11,#\y + sub r10, r11 + ;; verify result + ldi r12, #\r + cmpeq r10, r12 + brf0t 1f + ldi r6, 1 + ldi r2, #\s + trap 15 +1: + ;; verify carry + mvfc r6, cr0 + and3 r6, r6, #1 + cmpeqi r6, #\c + brf0t 1f + ldi r6, 1 + ldi r2, #\s + trap 15 +1: + .endm + +check_sub 1 0x0000 0x0000 0x0000 1 +check_sub 2 0x0000 0x0001 0xffff 0 +check_sub 3 0x0001 0x0000 0x0001 1 +check_sub 4 0x0001 0x0001 0x0000 1 +check_sub 5 0x0000 0x8000 0x8000 0 +check_sub 6 0x8000 0x0001 0x7fff 1 +check_sub 7 0x7fff 0x7fff 0x0000 1 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-sub2w.s b/sim/testsuite/d10v-elf/t-sub2w.s new file mode 100644 index 00000000000..9f1bbb7321e --- /dev/null +++ b/sim/testsuite/d10v-elf/t-sub2w.s @@ -0,0 +1,57 @@ +.include "t-macros.i" + + start + +;; The d10v implements negated addition for subtraction + + .macro check_sub2w s x y r c v + + ;; clear carry + ldi r6,#0x8004 + mvtc r6,cr0 + + ;; load opnds + ld2w r6, @(1f,r0) + ld2w r8, @(2f,r0) + .data +1: .long \x +2: .long \y + .text + + ;; subtract + SUB2W r6, r8 + + ;; verify result + ld2w r10, @(1f,r0) + .data +1: .long \r + .text + cmpeq r6, r10 + brf0f 2f + cmpeq r7, r11 + brf0t 3f +2: ldi r4, 1 + ldi r0, \s + trap 15 +3: + + ;; verify carry + mvfc r6, cr0 + and3 r6, r6, #1 + cmpeqi r6, #\c + brf0t 1f + ldi r4, 1 + ldi r0, \s + trap 15 +1: + .endm + +check_sub2w 1 0x00000000 0x00000000 0x00000000 1 0 +check_sub2w 2 0x00000000 0x00000001 0xffffffff 0 0 +check_sub2w 3 0x00000001 0x00000000 0x00000001 1 0 +check_sub2w 3 0x00000001 0x00000001 0x00000000 1 0 +check_sub2w 5 0x00000000 0x80000000 0x80000000 0 1 +check_sub2w 6 0x80000000 0x00000001 0x7fffffff 1 1 +check_sub2w 7 0x7fffffff 0x7fffffff 0x00000000 1 0 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-subi.s b/sim/testsuite/d10v-elf/t-subi.s new file mode 100644 index 00000000000..81faad5ec24 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-subi.s @@ -0,0 +1,39 @@ +.include "t-macros.i" + + start + +;; The d10v implements negated addition for subtraction + + .macro check_subi s x y r c v + ;; clear carry + ldi r6,#0x8004 + mvtc r6,cr0 + ;; subtract + ldi r10,#\x + SUBI r10,#\y + ;; verify result + ldi r11, #\r + cmpeq r10, r11 + brf0t 1f + ldi r6, 1 + ldi r2, \s + trap 15 +1: + ;; verify carry + mvfc r6, cr0 + and3 r6, r6, #1 + cmpeqi r6, #\c + brf0t 1f + ldi r6, 1 + ldi r2, \s + trap 15 +1: + .endm + + check_subi 1 0000 0x0000 0xfff0 00 ;; 0 - 0x10 + check_subi 2 0x0000 0x0001 0xffff 0 0 + check_subi 3 0x0001 0x0000 0xfff1 0 0 + check_subi 4 0x0001 0x0001 0x0000 1 0 + check_subi 5 0x8000 0x0001 0x7fff 1 1 + + exit0 diff --git a/sim/testsuite/d10v-elf/t-trap.s b/sim/testsuite/d10v-elf/t-trap.s new file mode 100644 index 00000000000..6ac4ae01ef8 --- /dev/null +++ b/sim/testsuite/d10v-elf/t-trap.s @@ -0,0 +1,5 @@ +.include "t-macros.i" + + start + + exit47 |