1 files changed, 0 insertions, 198 deletions
diff --git a/tcl/doc/button.n b/tcl/doc/button.n
deleted file mode 100644
index ca07c4827cd..00000000000
--- a/tcl/doc/button.n
+++ /dev/null
@@ -1,198 +0,0 @@
-'\"
-'\" Copyright (c) 1990-1994 The Regents of the University of California.
-'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
-'\"
-'\" See the file "license.terms" for information on usage and redistribution
-'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-'\" 
-'\" RCS: @(#) $Id$
-'\" 
-.so man.macros
-.TH button n 4.4 Tk "Tk Built-In Commands"
-.BS
-'\" Note:  do not modify the .SH NAME line immediately below!
-.SH NAME
-button \- Create and manipulate button widgets
-.SH SYNOPSIS
-\fBbutton\fR \fIpathName \fR?\fIoptions\fR?
-.SO
-\-activebackground	\-foreground	\-repeatdelay
-\-activeforeground	\-highlightbackground	\-repeatinterval
-\-anchor	\-highlightcolor	\-takefocus
-\-background	\-highlightthickness	\-text
-\-bitmap	\-image	\-textvariable
-\-borderwidth	\-justify	\-underline
-\-cursor	\-padx	\-wraplength
-\-disabledforeground	\-pady
-\-font	\-relief
-.SE
-.SH "WIDGET-SPECIFIC OPTIONS"
-.OP \-command command Command
-Specifies a Tcl command to associate with the button.  This command
-is typically invoked when mouse button 1 is released over the button
-window.
-.VS 8.4
-.OP \-compound compound Compound
-Specifies whether the button should display both an image and text,
-and if so, where the image should be placed relative to the text.
-Valid values for this option are \fBbottom\fR, \fBcenter\fR,
-\fBleft\fR, \fBnone\fR, \fBright\fR and \fBtop\fR.  The default value
-is \fBnone\fR, meaning that the button will display either an image or
-text, depending on the values of the \fB\-image\fR and \fB\-bitmap\fR
-options.
-.VE
-.OP \-default default Default
-.VS
-Specifies one of three states for the default ring: \fBnormal\fR,
-\fBactive\fR, or \fBdisabled\fR.  In active state, the button is drawn
-with the platform specific appearance for a default button.  In normal
-state, the button is drawn with the platform specific appearance for a
-non-default button, leaving enough space to draw the default button
-appearance.  The normal and active states will result in buttons of
-the same size.  In disabled state, the button is drawn with the
-non-default button appearance without leaving space for the default
-appearance.  The disabled state may result in a smaller button than
-the active state.
-ring.
-.VE
-.OP \-height height Height
-Specifies a desired height for the button.
-If an image or bitmap is being displayed in the button then the value is in
-screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
-for text it is in lines of text.
-If this option isn't specified, the button's desired height is computed
-from the size of the image or bitmap or text being displayed in it.
-.VS 8.4
-.OP \-overrelief overRelief OverRelief
-Specifies an alternative relief for the button, to be used when the
-mouse cursor is over the widget.  This option can be used to make
-toolbar buttons, by configuring \fB\-relief flat \-overrelief
-raised\fR.  If the value of this option is the empty string, then no
-alternative relief is used when the mouse cursor is over the button.
-The empty string is the default value.
-.VE 8.4
-.OP \-state state State
-Specifies one of three states for the button:  \fBnormal\fR, \fBactive\fR,
-or \fBdisabled\fR.  In normal state the button is displayed using the
-\fBforeground\fR and \fBbackground\fR options.  The active state is
-typically used when the pointer is over the button.  In active state
-the button is displayed using the \fBactiveForeground\fR and
-\fBactiveBackground\fR options.  Disabled state means that the button
-should be insensitive:  the default bindings will refuse to activate
-the widget and will ignore mouse button presses.
-In this state the \fBdisabledForeground\fR and
-\fBbackground\fR options determine how the button is displayed.
-.OP \-width width Width
-Specifies a desired width for the button.
-If an image or bitmap is being displayed in the button then the value is in
-screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
-for text it is in characters.
-If this option isn't specified, the button's desired width is computed
-from the size of the image or bitmap or text being displayed in it.
-.BE
-
-.SH DESCRIPTION
-.PP
-The \fBbutton\fR command creates a new window (given by the
-\fIpathName\fR argument) and makes it into a button widget.
-Additional
-options, described above, may be specified on the command line
-or in the option database
-to configure aspects of the button such as its colors, font,
-text, and initial relief.  The \fBbutton\fR command returns its
-\fIpathName\fR argument.  At the time this command is invoked,
-there must not exist a window named \fIpathName\fR, but
-\fIpathName\fR's parent must exist.
-.PP
-A button is a widget that displays a textual string, bitmap or image.
-If text is displayed, it must all be in a single font, but it
-can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fBwrapLength\fR option) and
-one of the characters may optionally be underlined using the
-\fBunderline\fR option.
-It can display itself in either of three different ways, according
-to
-the \fBstate\fR option; 
-it can be made to appear raised, sunken, or flat;
-and it can be made to flash.  When a user invokes the
-button (by pressing mouse button 1 with the cursor over the
-button), then the Tcl command specified in the \fB\-command\fR
-option is invoked.
-
-.SH "WIDGET COMMAND"
-.PP
-The \fBbutton\fR command creates a new Tcl command whose
-name is \fIpathName\fR.  This
-command may be used to invoke various
-operations on the widget.  It has the following general form:
-.CS
-\fIpathName option \fR?\fIarg arg ...\fR?
-.CE
-\fIOption\fR and the \fIarg\fRs
-determine the exact behavior of the command.  The following
-commands are possible for button widgets:
-.TP
-\fIpathName \fBcget\fR \fIoption\fR
-Returns the current value of the configuration option given
-by \fIoption\fR.
-\fIOption\fR may have any of the values accepted by the \fBbutton\fR
-command.
-.TP
-\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
-Query or modify the configuration options of the widget.
-If no \fIoption\fR is specified, returns a list describing all of
-the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
-information on the format of this list).  If \fIoption\fR is specified
-with no \fIvalue\fR, then the command returns a list describing the
-one named option (this list will be identical to the corresponding
-sublist of the value returned if no \fIoption\fR is specified).  If
-one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given widget option(s) to have the given value(s);  in
-this case the command returns an empty string.
-\fIOption\fR may have any of the values accepted by the \fBbutton\fR
-command.
-.TP
-\fIpathName \fBflash\fR
-Flash the button.  This is accomplished by redisplaying the button
-several times, alternating between active and normal colors.  At
-the end of the flash the button is left in the same normal/active
-state as when the command was invoked.
-This command is ignored if the button's state is \fBdisabled\fR.
-.TP
-\fIpathName \fBinvoke\fR
-Invoke the Tcl command associated with the button, if there is one.
-The return value is the return value from the Tcl command, or an
-empty string if there is no command associated with the button.
-This command is ignored if the button's state is \fBdisabled\fR.
-
-.SH "DEFAULT BINDINGS"
-.PP
-Tk automatically creates class bindings for buttons that give them
-default behavior:
-.IP [1]
-A button activates whenever the mouse passes over it and deactivates
-whenever the mouse leaves the button.
-.VS
-Under Windows, this binding is only active when mouse button 1 has
-been pressed over the button.
-.VE
-.IP [2]
-A button's relief is changed to sunken whenever mouse button 1 is
-pressed over the button, and the relief is restored to its original
-value when button 1 is later released.
-.IP [3]
-If mouse button 1 is pressed over a button and later released over
-the button, the button is invoked.  However, if the mouse is not
-over the button when button 1 is released, then no invocation occurs.
-.IP [4]
-When a button has the input focus, the space key causes the button
-to be invoked.
-.PP
-If the button's state is \fBdisabled\fR then none of the above
-actions occur:  the button is completely non-responsive.
-.PP
-The behavior of buttons can be changed by defining new bindings for
-individual widgets or by redefining the class bindings.
-
-.SH KEYWORDS
-button, widget