From 7c77df928722862f8a421fa01d7d130536fcda28 Mon Sep 17 00:00:00 2001 From: Jan Kratochvil Date: Sun, 28 Nov 2010 04:31:21 +0000 Subject: gdb/ Rename and move inferior_thread_state and inferior_status. * gdbthread.h (struct thread_control_state): New struct, move fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step and stop_bpstat here from struct thread_info. (struct thread_suspend_state): New struct, move field stop_signal here from struct thread_info. (struct thread_info): Move the fields above from this struct. * inferior.h: Move the inferior_thread_state and inferior_status declarations comment to their definitions at infrun.c. (struct inferior_control_state): New struct, move field stop_soon from struct inferior here. (struct inferior_suspend_state): New empty struct. (struct inferior): New fields control and suspend. Move out field stop_soon. * infrun.c (struct inferior_thread_state): Rename to ... (infcall_suspend_state): ... here. Replace field stop_signal by fields thread_suspend and inferior_suspend. (save_inferior_thread_state): Rename to ... (save_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (restore_inferior_thread_state): Rename to ... (restore_infcall_suspend_state): ... here. New variable inf. Update the code for new fields. (do_restore_inferior_thread_state_cleanup): Rename to ... (do_restore_infcall_suspend_state_cleanup): ... here. (make_cleanup_restore_inferior_thread_state): Rename to ... (make_cleanup_restore_infcall_suspend_state): ... here. (discard_inferior_thread_state): Rename to ... (discard_infcall_suspend_state): ... here. (get_inferior_thread_state_regcache): Rename to ... (get_infcall_suspend_state_regcache): ... here. (struct inferior_status): Rename to ... (struct infcall_control_state): ... here. Replace fields step_range_start, step_range_end, step_frame_id, step_stack_frame_id, trap_expected, proceed_to_finish, in_infcall, step_over_calls, stop_step, stop_bpstat and stop_soon by fields thread_control and inferior_control. (save_inferior_status): Rename to ... (save_infcall_control_state): ... here. Update the code for new fields. (restore_inferior_status): Rename to ... (restore_infcall_control_state): ... here. Update the code for new fields. (do_restore_inferior_status_cleanup): Rename to ... (do_restore_infcall_control_state_cleanup): ... here. (make_cleanup_restore_inferior_status): Rename to ... (make_cleanup_restore_infcall_control_state): ... here. (discard_inferior_status): Rename to ... (discard_infcall_control_state): ... here. * alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h, exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c, inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c, mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c, solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the references to the moved fields and renamed functions. --- gdb/infrun.c | 511 ++++++++++++++++++++++++++++------------------------------- 1 file changed, 246 insertions(+), 265 deletions(-) (limited to 'gdb/infrun.c') diff --git a/gdb/infrun.c b/gdb/infrun.c index 80086b18f99..1144443257b 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -426,9 +426,9 @@ follow_fork (void) { step_resume_breakpoint = clone_momentary_breakpoint (tp->step_resume_breakpoint); - step_range_start = tp->step_range_start; - step_range_end = tp->step_range_end; - step_frame_id = tp->step_frame_id; + step_range_start = tp->control.step_range_start; + step_range_end = tp->control.step_range_end; + step_frame_id = tp->control.step_frame_id; /* For now, delete the parent's sr breakpoint, otherwise, parent/child sr breakpoints are considered duplicates, @@ -436,9 +436,9 @@ follow_fork (void) this when the breakpoints module becomes aware of inferiors and address spaces. */ delete_step_resume_breakpoint (tp); - tp->step_range_start = 0; - tp->step_range_end = 0; - tp->step_frame_id = null_frame_id; + tp->control.step_range_start = 0; + tp->control.step_range_end = 0; + tp->control.step_frame_id = null_frame_id; } parent = inferior_ptid; @@ -477,9 +477,9 @@ follow_fork (void) { tp = inferior_thread (); tp->step_resume_breakpoint = step_resume_breakpoint; - tp->step_range_start = step_range_start; - tp->step_range_end = step_range_end; - tp->step_frame_id = step_frame_id; + tp->control.step_range_start = step_range_start; + tp->control.step_range_end = step_range_end; + tp->control.step_frame_id = step_frame_id; } else { @@ -555,7 +555,7 @@ proceed_after_vfork_done (struct thread_info *thread, && is_running (thread->ptid) && !is_executing (thread->ptid) && !thread->stop_requested - && thread->stop_signal == TARGET_SIGNAL_0) + && thread->suspend.stop_signal == TARGET_SIGNAL_0) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, @@ -770,8 +770,8 @@ follow_exec (ptid_t pid, char *execd_pathname) /* If there was one, it's gone now. We cannot truly step-to-next statement through an exec(). */ th->step_resume_breakpoint = NULL; - th->step_range_start = 0; - th->step_range_end = 0; + th->control.step_range_start = 0; + th->control.step_range_end = 0; /* The target reports the exec event to the main thread, even if some other thread does the exec, and even if the main thread was @@ -1431,7 +1431,7 @@ displaced_step_fixup (ptid_t event_ptid, enum target_signal signal) /* The breakpoint we were sitting under has since been removed. */ - tp->trap_expected = 0; + tp->control.trap_expected = 0; /* Go back to what we were trying to do. */ step = currently_stepping (tp); @@ -1441,7 +1441,7 @@ displaced_step_fixup (ptid_t event_ptid, enum target_signal signal) target_pid_to_str (tp->ptid), step); target_resume (ptid, step, TARGET_SIGNAL_0); - tp->stop_signal = TARGET_SIGNAL_0; + tp->suspend.stop_signal = TARGET_SIGNAL_0; /* This request was discarded. See if there's any other thread waiting for its turn. */ @@ -1592,7 +1592,7 @@ resume (int step, enum target_signal sig) fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d), " "trap_expected=%d\n", - step, sig, tp->trap_expected); + step, sig, tp->control.trap_expected); /* Normally, by the time we reach `resume', the breakpoints are either removed or inserted, as appropriate. The exception is if we're sitting @@ -1621,7 +1621,7 @@ a command like `return' or `jump' to continue execution.")); event, displaced stepping breaks the vfork child similarly as single step software breakpoint. */ if (use_displaced_stepping (gdbarch) - && (tp->trap_expected + && (tp->control.trap_expected || (step && gdbarch_software_single_step_p (gdbarch))) && sig == TARGET_SIGNAL_0 && !current_inferior ()->waiting_for_vfork_done) @@ -1690,7 +1690,7 @@ a command like `return' or `jump' to continue execution.")); resume_ptid = inferior_ptid; } else if ((step || singlestep_breakpoints_inserted_p) - && tp->trap_expected) + && tp->control.trap_expected) { /* We're allowing a thread to run past a breakpoint it has hit, by single-stepping the thread with the breakpoint @@ -1729,7 +1729,7 @@ a command like `return' or `jump' to continue execution.")); if (debug_displaced && use_displaced_stepping (gdbarch) - && tp->trap_expected) + && tp->control.trap_expected) { struct regcache *resume_regcache = get_thread_regcache (resume_ptid); struct gdbarch *resume_gdbarch = get_regcache_arch (resume_regcache); @@ -1747,7 +1747,7 @@ a command like `return' or `jump' to continue execution.")); /* Avoid confusing the next resume, if the next stop/resume happens to apply to another thread. */ - tp->stop_signal = TARGET_SIGNAL_0; + tp->suspend.stop_signal = TARGET_SIGNAL_0; target_resume (resume_ptid, step, sig); } @@ -1768,20 +1768,20 @@ clear_proceed_status_thread (struct thread_info *tp) "infrun: clear_proceed_status_thread (%s)\n", target_pid_to_str (tp->ptid)); - tp->trap_expected = 0; - tp->step_range_start = 0; - tp->step_range_end = 0; - tp->step_frame_id = null_frame_id; - tp->step_stack_frame_id = null_frame_id; - tp->step_over_calls = STEP_OVER_UNDEBUGGABLE; + tp->control.trap_expected = 0; + tp->control.step_range_start = 0; + tp->control.step_range_end = 0; + tp->control.step_frame_id = null_frame_id; + tp->control.step_stack_frame_id = null_frame_id; + tp->control.step_over_calls = STEP_OVER_UNDEBUGGABLE; tp->stop_requested = 0; - tp->stop_step = 0; + tp->control.stop_step = 0; - tp->proceed_to_finish = 0; + tp->control.proceed_to_finish = 0; /* Discard any remaining commands or status from previous stop. */ - bpstat_clear (&tp->stop_bpstat); + bpstat_clear (&tp->control.stop_bpstat); } static int @@ -1818,7 +1818,7 @@ clear_proceed_status (void) } inferior = current_inferior (); - inferior->stop_soon = NO_STOP_QUIETLY; + inferior->control.stop_soon = NO_STOP_QUIETLY; } stop_after_trap = 0; @@ -2011,7 +2011,7 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) if (oneproc) { - tp->trap_expected = 1; + tp->control.trap_expected = 1; /* If displaced stepping is enabled, we can step over the breakpoint without hitting it, so leave all breakpoints inserted. Otherwise we need to disable all breakpoints, step @@ -2024,7 +2024,7 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) /* We can insert breakpoints if we're not trying to step over one, or if we are stepping over one but we're using displaced stepping to do so. */ - if (! tp->trap_expected || use_displaced_stepping (gdbarch)) + if (! tp->control.trap_expected || use_displaced_stepping (gdbarch)) insert_breakpoints (); if (!non_stop) @@ -2046,18 +2046,18 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) last_thread = find_thread_ptid (last_ptid); if (last_thread) { - tp->stop_signal = last_thread->stop_signal; - last_thread->stop_signal = TARGET_SIGNAL_0; + tp->suspend.stop_signal = last_thread->suspend.stop_signal; + last_thread->suspend.stop_signal = TARGET_SIGNAL_0; } } } if (siggnal != TARGET_SIGNAL_DEFAULT) - tp->stop_signal = siggnal; + tp->suspend.stop_signal = siggnal; /* If this signal should not be seen by program, give it zero. Used for debugging signals. */ - else if (!signal_program[tp->stop_signal]) - tp->stop_signal = TARGET_SIGNAL_0; + else if (!signal_program[tp->suspend.stop_signal]) + tp->suspend.stop_signal = TARGET_SIGNAL_0; annotate_starting (); @@ -2097,7 +2097,7 @@ proceed (CORE_ADDR addr, enum target_signal siggnal, int step) init_infwait_state (); /* Resume inferior. */ - resume (oneproc || step || bpstat_should_step (), tp->stop_signal); + resume (oneproc || step || bpstat_should_step (), tp->suspend.stop_signal); /* Wait for it to stop (if not standalone) and in any case decode why it stopped, and act accordingly. */ @@ -2120,7 +2120,7 @@ start_remote (int from_tty) init_wait_for_inferior (); inferior = current_inferior (); - inferior->stop_soon = STOP_QUIETLY_REMOTE; + inferior->control.stop_soon = STOP_QUIETLY_REMOTE; /* Always go on waiting for the target, regardless of the mode. */ /* FIXME: cagney/1999-09-23: At present it isn't possible to @@ -2661,14 +2661,14 @@ fetch_inferior_event (void *client_data) delete_step_thread_step_resume_breakpoint (); /* We may not find an inferior if this was a process exit. */ - if (inf == NULL || inf->stop_soon == NO_STOP_QUIETLY) + if (inf == NULL || inf->control.stop_soon == NO_STOP_QUIETLY) normal_stop (); if (target_has_execution && ecs->ws.kind != TARGET_WAITKIND_EXITED && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->event_thread->step_multi - && ecs->event_thread->stop_step) + && ecs->event_thread->control.stop_step) inferior_event_handler (INF_EXEC_CONTINUE, NULL); else inferior_event_handler (INF_EXEC_COMPLETE, NULL); @@ -2692,8 +2692,8 @@ set_step_info (struct frame_info *frame, struct symtab_and_line sal) { struct thread_info *tp = inferior_thread (); - tp->step_frame_id = get_frame_id (frame); - tp->step_stack_frame_id = get_stack_frame_id (frame); + tp->control.step_frame_id = get_frame_id (frame); + tp->control.step_stack_frame_id = get_stack_frame_id (frame); tp->current_symtab = sal.symtab; tp->current_line = sal.line; @@ -2933,21 +2933,22 @@ handle_syscall_event (struct execution_control_state *ecs) fprintf_unfiltered (gdb_stdlog, "infrun: syscall number = '%d'\n", syscall_number); - ecs->event_thread->stop_bpstat + ecs->event_thread->control.stop_bpstat = bpstat_stop_status (get_regcache_aspace (regcache), stop_pc, ecs->ptid); - ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat); + ecs->random_signal + = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat); if (!ecs->random_signal) { /* Catchpoint hit. */ - ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP; return 0; } } /* If no catchpoint triggered for this, then keep going. */ - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; keep_going (ecs); return 1; } @@ -2990,7 +2991,7 @@ handle_inferior_event (struct execution_control_state *ecs) struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid)); gdb_assert (inf); - stop_soon = inf->stop_soon; + stop_soon = inf->control.stop_soon; } else stop_soon = NO_STOP_QUIETLY; @@ -3267,7 +3268,7 @@ handle_inferior_event (struct execution_control_state *ecs) stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); - ecs->event_thread->stop_bpstat + ecs->event_thread->control.stop_bpstat = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()), stop_pc, ecs->ptid); @@ -3275,7 +3276,8 @@ handle_inferior_event (struct execution_control_state *ecs) causes a stop, not just if it may explain the signal. Software watchpoints, for example, always appear in the bpstat. */ - ecs->random_signal = !bpstat_causes_stop (ecs->event_thread->stop_bpstat); + ecs->random_signal + = !bpstat_causes_stop (ecs->event_thread->control.stop_bpstat); /* If no catchpoint triggered for this, then keep going. */ if (ecs->random_signal) @@ -3285,7 +3287,7 @@ handle_inferior_event (struct execution_control_state *ecs) int should_resume; int follow_child = (follow_fork_mode_string == follow_fork_mode_child); - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; should_resume = follow_fork (); @@ -3319,7 +3321,7 @@ handle_inferior_event (struct execution_control_state *ecs) stop_stepping (ecs); return; } - ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP; goto process_event_stop_test; case TARGET_WAITKIND_VFORK_DONE: @@ -3362,10 +3364,11 @@ handle_inferior_event (struct execution_control_state *ecs) stop. */ follow_exec (inferior_ptid, ecs->ws.value.execd_pathname); - ecs->event_thread->stop_bpstat + ecs->event_thread->control.stop_bpstat = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()), stop_pc, ecs->ptid); - ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat); + ecs->random_signal + = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat); /* Note that this may be referenced from inside bpstat_stop_status above, through inferior_has_execd. */ @@ -3375,11 +3378,11 @@ handle_inferior_event (struct execution_control_state *ecs) /* If no catchpoint triggered for this, then keep going. */ if (ecs->random_signal) { - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; keep_going (ecs); return; } - ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP; goto process_event_stop_test; /* Be careful not to try to gather much state about a thread @@ -3407,7 +3410,7 @@ handle_inferior_event (struct execution_control_state *ecs) case TARGET_WAITKIND_STOPPED: if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n"); - ecs->event_thread->stop_signal = ecs->ws.value.sig; + ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig; break; case TARGET_WAITKIND_NO_HISTORY: @@ -3446,15 +3449,16 @@ targets should add new threads to the thread list themselves in non-stop mode.") /* Do we need to clean up the state of a thread that has completed a displaced single-step? (Doing so usually affects the PC, so do it here, before we set stop_pc.) */ - displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal); + displaced_step_fixup (ecs->ptid, + ecs->event_thread->suspend.stop_signal); /* If we either finished a single-step or hit a breakpoint, but the user wanted this thread to be stopped, pretend we got a SIG0 (generic unsignaled stop). */ if (ecs->event_thread->stop_requested - && ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP) - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP) + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; } stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); @@ -3498,7 +3502,7 @@ targets should add new threads to the thread list themselves in non-stop mode.") /* We've either finished single-stepping past the single-step breakpoint, or stopped for some other reason. It would be nice if we could tell, but we can't reliably. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP) + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n"); @@ -3507,7 +3511,7 @@ targets should add new threads to the thread list themselves in non-stop mode.") singlestep_breakpoints_inserted_p = 0; ecs->random_signal = 0; - ecs->event_thread->trap_expected = 0; + ecs->event_thread->control.trap_expected = 0; context_switch (saved_singlestep_ptid); if (deprecated_context_hook) @@ -3526,7 +3530,7 @@ targets should add new threads to the thread list themselves in non-stop mode.") /* If we stopped for some other reason than single-stepping, ignore the fact that we were supposed to switch back. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP) + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, @@ -3558,7 +3562,7 @@ targets should add new threads to the thread list themselves in non-stop mode.") another thread. If so, then step that thread past the breakpoint, and continue it. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP) + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP) { int thread_hop_needed = 0; struct address_space *aspace = @@ -3624,11 +3628,11 @@ targets should add new threads to the thread list themselves in non-stop mode.") singlestep_ptid. Don't swap here, since that's the context we want to use. Just fudge our state and continue. */ - stop_signal = ecs->event_thread->stop_signal; - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + stop_signal = ecs->event_thread->suspend.stop_signal; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; ecs->ptid = singlestep_ptid; ecs->event_thread = find_thread_ptid (ecs->ptid); - ecs->event_thread->stop_signal = stop_signal; + ecs->event_thread->suspend.stop_signal = stop_signal; stop_pc = new_singlestep_pc; } else @@ -3787,8 +3791,8 @@ targets should add new threads to the thread list themselves in non-stop mode.") ecs->stop_func_start += gdbarch_deprecated_function_start_offset (gdbarch); ecs->event_thread->stepping_over_breakpoint = 0; - bpstat_clear (&ecs->event_thread->stop_bpstat); - ecs->event_thread->stop_step = 0; + bpstat_clear (&ecs->event_thread->control.stop_bpstat); + ecs->event_thread->control.stop_step = 0; stop_print_frame = 1; ecs->random_signal = 0; stopped_by_random_signal = 0; @@ -3796,11 +3800,11 @@ targets should add new threads to the thread list themselves in non-stop mode.") /* Hide inlined functions starting here, unless we just performed stepi or nexti. After stepi and nexti, always show the innermost frame (not any inline function call sites). */ - if (ecs->event_thread->step_range_end != 1) + if (ecs->event_thread->control.step_range_end != 1) skip_inline_frames (ecs->ptid); - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP - && ecs->event_thread->trap_expected + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP + && ecs->event_thread->control.trap_expected && gdbarch_single_step_through_delay_p (gdbarch) && currently_stepping (ecs->event_thread)) { @@ -3814,7 +3818,8 @@ targets should add new threads to the thread list themselves in non-stop mode.") if (debug_infrun && step_through_delay) fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n"); - if (ecs->event_thread->step_range_end == 0 && step_through_delay) + if (ecs->event_thread->control.step_range_end == 0 + && step_through_delay) { /* The user issued a continue when stopped at a breakpoint. Set up for another trap and get out of here. */ @@ -3842,11 +3847,12 @@ targets should add new threads to the thread list themselves in non-stop mode.") 3) set ecs->random_signal to 1, and the decision between 1 and 2 will be made according to the signal handling tables. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP || stop_soon == STOP_QUIETLY_REMOTE) { - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap) + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP + && stop_after_trap) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n"); @@ -3886,17 +3892,17 @@ targets should add new threads to the thread list themselves in non-stop mode.") TARGET_SIGNAL_0, meaning: stopped for no particular reason other than GDB's request. */ if (stop_soon == STOP_QUIETLY_NO_SIGSTOP - && (ecs->event_thread->stop_signal == TARGET_SIGNAL_STOP - || ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP - || ecs->event_thread->stop_signal == TARGET_SIGNAL_0)) + && (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_STOP + || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP + || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_0)) { stop_stepping (ecs); - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; return; } /* See if there is a breakpoint at the current PC. */ - ecs->event_thread->stop_bpstat + ecs->event_thread->control.stop_bpstat = bpstat_stop_status (get_regcache_aspace (get_current_regcache ()), stop_pc, ecs->ptid); @@ -3913,8 +3919,8 @@ targets should add new threads to the thread list themselves in non-stop mode.") set. */ if (debug_infrun - && ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP - && !bpstat_explains_signal (ecs->event_thread->stop_bpstat) + && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP + && !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat) && stopped_by_watchpoint) fprintf_unfiltered (gdb_stdlog, "\ infrun: no user watchpoint explains watchpoint SIGTRAP, ignoring\n"); @@ -3939,18 +3945,19 @@ infrun: no user watchpoint explains watchpoint SIGTRAP, ignoring\n"); be necessary for call dummies on a non-executable stack on SPARC. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP) + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP) ecs->random_signal - = !(bpstat_explains_signal (ecs->event_thread->stop_bpstat) + = !(bpstat_explains_signal (ecs->event_thread->control.stop_bpstat) || stopped_by_watchpoint - || ecs->event_thread->trap_expected - || (ecs->event_thread->step_range_end + || ecs->event_thread->control.trap_expected + || (ecs->event_thread->control.step_range_end && ecs->event_thread->step_resume_breakpoint == NULL)); else { - ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat); + ecs->random_signal = !bpstat_explains_signal + (ecs->event_thread->control.stop_bpstat); if (!ecs->random_signal) - ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP; + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP; } } @@ -3979,15 +3986,16 @@ process_event_stop_test: if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", - ecs->event_thread->stop_signal); + ecs->event_thread->suspend.stop_signal); stopped_by_random_signal = 1; - if (signal_print[ecs->event_thread->stop_signal]) + if (signal_print[ecs->event_thread->suspend.stop_signal]) { printed = 1; target_terminal_ours_for_output (); - print_signal_received_reason (ecs->event_thread->stop_signal); + print_signal_received_reason + (ecs->event_thread->suspend.stop_signal); } /* Always stop on signals if we're either just gaining control of the program, or the user explicitly requested this thread @@ -3995,7 +4003,7 @@ process_event_stop_test: if (stop_soon != NO_STOP_QUIETLY || ecs->event_thread->stop_requested || (!inf->detaching - && signal_stop_state (ecs->event_thread->stop_signal))) + && signal_stop_state (ecs->event_thread->suspend.stop_signal))) { stop_stepping (ecs); return; @@ -4006,11 +4014,11 @@ process_event_stop_test: target_terminal_inferior (); /* Clear the signal if it should not be passed. */ - if (signal_program[ecs->event_thread->stop_signal] == 0) - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + if (signal_program[ecs->event_thread->suspend.stop_signal] == 0) + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; if (ecs->event_thread->prev_pc == stop_pc - && ecs->event_thread->trap_expected + && ecs->event_thread->control.trap_expected && ecs->event_thread->step_resume_breakpoint == NULL) { /* We were just starting a new sequence, attempting to @@ -4034,12 +4042,12 @@ process_event_stop_test: return; } - if (ecs->event_thread->step_range_end != 0 - && ecs->event_thread->stop_signal != TARGET_SIGNAL_0 - && (ecs->event_thread->step_range_start <= stop_pc - && stop_pc < ecs->event_thread->step_range_end) + if (ecs->event_thread->control.step_range_end != 0 + && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_0 + && (ecs->event_thread->control.step_range_start <= stop_pc + && stop_pc < ecs->event_thread->control.step_range_end) && frame_id_eq (get_stack_frame_id (frame), - ecs->event_thread->step_stack_frame_id) + ecs->event_thread->control.step_stack_frame_id) && ecs->event_thread->step_resume_breakpoint == NULL) { /* The inferior is about to take a signal that will take it @@ -4076,7 +4084,7 @@ process_event_stop_test: CORE_ADDR jmp_buf_pc; struct bpstat_what what; - what = bpstat_what (ecs->event_thread->stop_bpstat); + what = bpstat_what (ecs->event_thread->control.stop_bpstat); if (what.call_dummy) { @@ -4130,7 +4138,7 @@ infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n"); gdb_assert (ecs->event_thread->step_resume_breakpoint != NULL); delete_step_resume_breakpoint (ecs->event_thread); - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4217,8 +4225,8 @@ infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n"); /* However, if the current thread is blocked on some internal breakpoint, and we simply need to step over that breakpoint to get it going again, do that first. */ - if ((ecs->event_thread->trap_expected - && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP) + if ((ecs->event_thread->control.trap_expected + && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP) || ecs->event_thread->stepping_over_breakpoint) { keep_going (ecs); @@ -4259,7 +4267,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* Otherwise, we no longer expect a trap in the current thread. Clear the trap_expected flag before switching back -- this is what keep_going would do as well, if we called it. */ - ecs->event_thread->trap_expected = 0; + ecs->event_thread->control.trap_expected = 0; if (debug_infrun) fprintf_unfiltered (gdb_stdlog, @@ -4294,8 +4302,8 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* Else, stop and report the catchpoint(s) whose triggering caused us to begin stepping. */ ecs->event_thread->stepping_through_solib_after_catch = 0; - bpstat_clear (&ecs->event_thread->stop_bpstat); - ecs->event_thread->stop_bpstat + bpstat_clear (&ecs->event_thread->control.stop_bpstat); + ecs->event_thread->control.stop_bpstat = bpstat_copy (ecs->event_thread->stepping_through_solib_catchpoints); bpstat_clear (&ecs->event_thread->stepping_through_solib_catchpoints); stop_print_frame = 1; @@ -4316,7 +4324,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); return; } - if (ecs->event_thread->step_range_end == 0) + if (ecs->event_thread->control.step_range_end == 0) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n"); @@ -4341,26 +4349,26 @@ infrun: not switching back to stepped thread, it has vanished\n"); through a function epilogue and therefore must detect when the current-frame changes in the middle of a line. */ - if (stop_pc >= ecs->event_thread->step_range_start - && stop_pc < ecs->event_thread->step_range_end + if (stop_pc >= ecs->event_thread->control.step_range_start + && stop_pc < ecs->event_thread->control.step_range_end && (execution_direction != EXEC_REVERSE || frame_id_eq (get_frame_id (frame), - ecs->event_thread->step_frame_id))) + ecs->event_thread->control.step_frame_id))) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [%s-%s]\n", - paddress (gdbarch, ecs->event_thread->step_range_start), - paddress (gdbarch, ecs->event_thread->step_range_end)); + paddress (gdbarch, ecs->event_thread->control.step_range_start), + paddress (gdbarch, ecs->event_thread->control.step_range_end)); /* When stepping backward, stop at beginning of line range (unless it's the function entry point, in which case keep going back to the call point). */ - if (stop_pc == ecs->event_thread->step_range_start + if (stop_pc == ecs->event_thread->control.step_range_start && stop_pc != ecs->stop_func_start && execution_direction == EXEC_REVERSE) { - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); } @@ -4385,7 +4393,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); down, so there is nothing for us to do here. */ if (execution_direction != EXEC_REVERSE - && ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE + && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE && in_solib_dynsym_resolve_code (stop_pc)) { CORE_ADDR pc_after_resolver = @@ -4412,9 +4420,9 @@ infrun: not switching back to stepped thread, it has vanished\n"); return; } - if (ecs->event_thread->step_range_end != 1 - && (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE - || ecs->event_thread->step_over_calls == STEP_OVER_ALL) + if (ecs->event_thread->control.step_range_end != 1 + && (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE + || ecs->event_thread->control.step_over_calls == STEP_OVER_ALL) && get_frame_type (frame) == SIGTRAMP_FRAME) { if (debug_infrun) @@ -4446,10 +4454,10 @@ infrun: not switching back to stepped thread, it has vanished\n"); have code_addr == &_start. See the comment in frame_id_eq for more. */ if (!frame_id_eq (get_stack_frame_id (frame), - ecs->event_thread->step_stack_frame_id) + ecs->event_thread->control.step_stack_frame_id) && (frame_id_eq (frame_unwind_caller_id (get_current_frame ()), - ecs->event_thread->step_stack_frame_id) - && (!frame_id_eq (ecs->event_thread->step_stack_frame_id, + ecs->event_thread->control.step_stack_frame_id) + && (!frame_id_eq (ecs->event_thread->control.step_stack_frame_id, outer_frame_id) || step_start_function != find_pc_function (stop_pc)))) { @@ -4458,8 +4466,8 @@ infrun: not switching back to stepped thread, it has vanished\n"); if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n"); - if ((ecs->event_thread->step_over_calls == STEP_OVER_NONE) - || ((ecs->event_thread->step_range_end == 1) + if ((ecs->event_thread->control.step_over_calls == STEP_OVER_NONE) + || ((ecs->event_thread->control.step_range_end == 1) && in_prologue (gdbarch, ecs->event_thread->prev_pc, ecs->stop_func_start))) { @@ -4470,7 +4478,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); thought it was a subroutine call but it was not. Stop as well. FENN */ /* And this works the same backward as frontward. MVS */ - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4479,7 +4487,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* Reverse stepping through solib trampolines. */ if (execution_direction == EXEC_REVERSE - && ecs->event_thread->step_over_calls != STEP_OVER_NONE + && ecs->event_thread->control.step_over_calls != STEP_OVER_NONE && (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc) || (ecs->stop_func_start == 0 && in_solib_dynsym_resolve_code (stop_pc)))) @@ -4493,7 +4501,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); return; } - if (ecs->event_thread->step_over_calls == STEP_OVER_ALL) + if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL) { /* We're doing a "next". @@ -4573,10 +4581,10 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* If we have no line number and the step-stop-if-no-debug is set, we stop the step so that the user has a chance to switch in assembly mode. */ - if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE + if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug) { - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4606,7 +4614,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* Reverse stepping through solib trampolines. */ if (execution_direction == EXEC_REVERSE - && ecs->event_thread->step_over_calls != STEP_OVER_NONE) + && ecs->event_thread->control.step_over_calls != STEP_OVER_NONE) { if (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc) || (ecs->stop_func_start == 0 @@ -4679,7 +4687,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* NOTE: tausq/2004-05-24: This if block used to be done before all the trampoline processing logic, however, there are some trampolines that have no names, so we should do trampoline handling first. */ - if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE + if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE && ecs->stop_func_name == NULL && stop_pc_sal.line == 0) { @@ -4700,7 +4708,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); /* If we have no line number and the step-stop-if-no-debug is set, we stop the step so that the user has a chance to switch in assembly mode. */ - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4715,13 +4723,13 @@ infrun: not switching back to stepped thread, it has vanished\n"); } } - if (ecs->event_thread->step_range_end == 1) + if (ecs->event_thread->control.step_range_end == 1) { /* It is stepi or nexti. We always want to stop stepping after one instruction. */ if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n"); - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4735,7 +4743,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); or can this happen as a result of a return or longjmp?). */ if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n"); - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4746,7 +4754,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); a new inline function. */ if (frame_id_eq (get_frame_id (get_current_frame ()), - ecs->event_thread->step_frame_id) + ecs->event_thread->control.step_frame_id) && inline_skipped_frames (ecs->ptid)) { struct symtab_and_line call_sal; @@ -4757,7 +4765,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); find_frame_sal (get_current_frame (), &call_sal); - if (ecs->event_thread->step_over_calls != STEP_OVER_ALL) + if (ecs->event_thread->control.step_over_calls != STEP_OVER_ALL) { /* For "step", we're going to stop. But if the call site for this inlined function is on the same source line as @@ -4768,7 +4776,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); && call_sal.symtab == ecs->event_thread->current_symtab) step_into_inline_frame (ecs->ptid); - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4783,7 +4791,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); keep_going (ecs); else { - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); } @@ -4798,19 +4806,19 @@ infrun: not switching back to stepped thread, it has vanished\n"); if (get_frame_type (get_current_frame ()) == INLINE_FRAME && !frame_id_eq (get_frame_id (get_current_frame ()), - ecs->event_thread->step_frame_id) + ecs->event_thread->control.step_frame_id) && stepped_in_from (get_current_frame (), - ecs->event_thread->step_frame_id)) + ecs->event_thread->control.step_frame_id)) { if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepping through inlined function\n"); - if (ecs->event_thread->step_over_calls == STEP_OVER_ALL) + if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL) keep_going (ecs); else { - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); } @@ -4827,7 +4835,7 @@ infrun: not switching back to stepped thread, it has vanished\n"); better. */ if (debug_infrun) fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n"); - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4840,8 +4848,8 @@ infrun: not switching back to stepped thread, it has vanished\n"); new line in mid-statement, we continue stepping. This makes things like for(;;) statements work better.) */ - ecs->event_thread->step_range_start = stop_pc_sal.pc; - ecs->event_thread->step_range_end = stop_pc_sal.end; + ecs->event_thread->control.step_range_start = stop_pc_sal.pc; + ecs->event_thread->control.step_range_end = stop_pc_sal.end; set_step_info (frame, stop_pc_sal); if (debug_infrun) @@ -4854,8 +4862,8 @@ infrun: not switching back to stepped thread, it has vanished\n"); static int currently_stepping (struct thread_info *tp) { - return ((tp->step_range_end && tp->step_resume_breakpoint == NULL) - || tp->trap_expected + return ((tp->control.step_range_end && tp->step_resume_breakpoint == NULL) + || tp->control.trap_expected || tp->stepping_through_solib_after_catch || bpstat_should_step ()); } @@ -4869,8 +4877,8 @@ currently_stepping_or_nexting_callback (struct thread_info *tp, void *data) if (tp == data) return 0; - return (tp->step_range_end - || tp->trap_expected + return (tp->control.step_range_end + || tp->control.trap_expected || tp->stepping_through_solib_after_catch); } @@ -4928,7 +4936,7 @@ handle_step_into_function (struct gdbarch *gdbarch, if (ecs->stop_func_start == stop_pc) { /* We are already there: stop now. */ - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); return; @@ -4947,7 +4955,8 @@ handle_step_into_function (struct gdbarch *gdbarch, insert_step_resume_breakpoint_at_sal (gdbarch, sr_sal, null_frame_id); /* And make sure stepping stops right away then. */ - ecs->event_thread->step_range_end = ecs->event_thread->step_range_start; + ecs->event_thread->control.step_range_end + = ecs->event_thread->control.step_range_start; } keep_going (ecs); } @@ -4974,7 +4983,7 @@ handle_step_into_function_backward (struct gdbarch *gdbarch, if (stop_func_sal.pc == stop_pc) { /* We're there already. Just stop stepping now. */ - ecs->event_thread->stop_step = 1; + ecs->event_thread->control.stop_step = 1; print_end_stepping_range_reason (); stop_stepping (ecs); } @@ -4983,8 +4992,8 @@ handle_step_into_function_backward (struct gdbarch *gdbarch, /* Else just reset the step range and keep going. No step-resume breakpoint, they don't work for epilogues, which can have multiple entry paths. */ - ecs->event_thread->step_range_start = stop_func_sal.pc; - ecs->event_thread->step_range_end = stop_func_sal.end; + ecs->event_thread->control.step_range_start = stop_func_sal.pc; + ecs->event_thread->control.step_range_end = stop_func_sal.end; keep_going (ecs); } return; @@ -5124,8 +5133,8 @@ keep_going (struct execution_control_state *ecs) /* If we did not do break;, it means we should keep running the inferior and not return to debugger. */ - if (ecs->event_thread->trap_expected - && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP) + if (ecs->event_thread->control.trap_expected + && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP) { /* We took a signal (which we are supposed to pass through to the inferior, else we'd not get here) and we haven't yet @@ -5133,7 +5142,7 @@ keep_going (struct execution_control_state *ecs) discard_cleanups (old_cleanups); resume (currently_stepping (ecs->event_thread), - ecs->event_thread->stop_signal); + ecs->event_thread->suspend.stop_signal); } else { @@ -5178,7 +5187,8 @@ keep_going (struct execution_control_state *ecs) } } - ecs->event_thread->trap_expected = ecs->event_thread->stepping_over_breakpoint; + ecs->event_thread->control.trap_expected + = ecs->event_thread->stepping_over_breakpoint; /* Do not deliver SIGNAL_TRAP (except when the user explicitly specifies that such a signal should be delivered to the @@ -5192,13 +5202,13 @@ keep_going (struct execution_control_state *ecs) simulator; the simulator then delivers the hardware equivalent of a SIGNAL_TRAP to the program being debugged. */ - if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP - && !signal_program[ecs->event_thread->stop_signal]) - ecs->event_thread->stop_signal = TARGET_SIGNAL_0; + if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP + && !signal_program[ecs->event_thread->suspend.stop_signal]) + ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0; discard_cleanups (old_cleanups); resume (currently_stepping (ecs->event_thread), - ecs->event_thread->stop_signal); + ecs->event_thread->suspend.stop_signal); } prepare_to_wait (ecs); @@ -5235,7 +5245,8 @@ prepare_to_wait (struct execution_control_state *ecs) static void print_end_stepping_range_reason (void) { - if ((!inferior_thread ()->step_multi || !inferior_thread ()->stop_step) + if ((!inferior_thread ()->step_multi + || !inferior_thread ()->control.stop_step) && ui_out_is_mi_like_p (uiout)) ui_out_field_string (uiout, "reason", async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE)); @@ -5411,7 +5422,7 @@ Further execution is probably impossible.\n")); && last.kind != TARGET_WAITKIND_SIGNALLED && last.kind != TARGET_WAITKIND_EXITED && inferior_thread ()->step_multi - && inferior_thread ()->stop_step) + && inferior_thread ()->control.stop_step) goto done; target_terminal_ours (); @@ -5463,7 +5474,7 @@ Further execution is probably impossible.\n")); int do_frame_printing = 1; struct thread_info *tp = inferior_thread (); - bpstat_ret = bpstat_print (tp->stop_bpstat); + bpstat_ret = bpstat_print (tp->control.stop_bpstat); switch (bpstat_ret) { case PRINT_UNKNOWN: @@ -5482,8 +5493,8 @@ Further execution is probably impossible.\n")); /* FIXME: cagney/2002-12-01: Given that a frame ID does (or should) carry around the function and does (or should) use that when doing a frame comparison. */ - if (tp->stop_step - && frame_id_eq (tp->step_frame_id, + if (tp->control.stop_step + && frame_id_eq (tp->control.step_frame_id, get_frame_id (get_current_frame ())) && step_start_function == find_pc_function (stop_pc)) source_flag = SRC_LINE; /* finished step, just print source line */ @@ -5519,7 +5530,7 @@ Further execution is probably impossible.\n")); /* Save the function value return registers, if we care. We might be about to restore their previous contents. */ - if (inferior_thread ()->proceed_to_finish) + if (inferior_thread ()->control.proceed_to_finish) { /* This should not be necessary. */ if (stop_registers) @@ -5534,7 +5545,7 @@ Further execution is probably impossible.\n")); { /* Pop the empty frame that contains the stack dummy. This also restores inferior state prior to the call - (struct inferior_thread_state). */ + (struct infcall_suspend_state). */ struct frame_info *frame = get_current_frame (); gdb_assert (get_frame_type (frame) == DUMMY_FRAME); @@ -5542,7 +5553,7 @@ Further execution is probably impossible.\n")); /* frame_pop() calls reinit_frame_cache as the last thing it does which means there's currently no selected frame. We don't need to re-establish a selected frame if the dummy call returns normally, - that will be done by restore_inferior_status. However, we do have + that will be done by restore_infcall_control_state. However, we do have to handle the case where the dummy call is returning after being stopped (e.g. the dummy call previously hit a breakpoint). We can't know which case we have so just always re-establish a @@ -5569,12 +5580,12 @@ done: || last.kind == TARGET_WAITKIND_SIGNALLED || last.kind == TARGET_WAITKIND_EXITED || (!inferior_thread ()->step_multi - && !(inferior_thread ()->stop_bpstat - && inferior_thread ()->proceed_to_finish) - && !inferior_thread ()->in_infcall)) + && !(inferior_thread ()->control.stop_bpstat + && inferior_thread ()->control.proceed_to_finish) + && !inferior_thread ()->control.in_infcall)) { if (!ptid_equal (inferior_ptid, null_ptid)) - observer_notify_normal_stop (inferior_thread ()->stop_bpstat, + observer_notify_normal_stop (inferior_thread ()->control.stop_bpstat, stop_print_frame); else observer_notify_normal_stop (NULL, stop_print_frame); @@ -5586,7 +5597,7 @@ done: && last.kind != TARGET_WAITKIND_EXITED) /* Delete the breakpoint we stopped at, if it wants to be deleted. Delete any breakpoint that is to be deleted at the next stop. */ - breakpoint_auto_delete (inferior_thread ()->stop_bpstat); + breakpoint_auto_delete (inferior_thread ()->control.stop_bpstat); } /* Try to get rid of automatically added inferiors that are no @@ -6033,17 +6044,18 @@ siginfo_make_value (struct gdbarch *gdbarch, struct internalvar *var) } -/* Inferior thread state. - These are details related to the inferior itself, and don't include - things like what frame the user had selected or what gdb was doing - with the target at the time. - For inferior function calls these are things we want to restore - regardless of whether the function call successfully completes - or the dummy frame has to be manually popped. */ +/* infcall_suspend_state contains state about the program itself like its + registers and any signal it received when it last stopped. + This state must be restored regardless of how the inferior function call + ends (either successfully, or after it hits a breakpoint or signal) + if the program is to properly continue where it left off. */ -struct inferior_thread_state +struct infcall_suspend_state { - enum target_signal stop_signal; + struct thread_suspend_state thread_suspend; + struct inferior_suspend_state inferior_suspend; + + /* Other fields: */ CORE_ADDR stop_pc; struct regcache *registers; @@ -6056,11 +6068,12 @@ struct inferior_thread_state gdb_byte *siginfo_data; }; -struct inferior_thread_state * -save_inferior_thread_state (void) +struct infcall_suspend_state * +save_infcall_suspend_state (void) { - struct inferior_thread_state *inf_state; + struct infcall_suspend_state *inf_state; struct thread_info *tp = inferior_thread (); + struct inferior *inf = current_inferior (); struct regcache *regcache = get_current_regcache (); struct gdbarch *gdbarch = get_regcache_arch (regcache); gdb_byte *siginfo_data = NULL; @@ -6085,7 +6098,7 @@ save_inferior_thread_state (void) } } - inf_state = XZALLOC (struct inferior_thread_state); + inf_state = XZALLOC (struct infcall_suspend_state); if (siginfo_data) { @@ -6093,10 +6106,12 @@ save_inferior_thread_state (void) inf_state->siginfo_data = siginfo_data; } - inf_state->stop_signal = tp->stop_signal; + inf_state->thread_suspend = tp->suspend; + inf_state->inferior_suspend = inf->suspend; + /* run_inferior_call will not use the signal due to its `proceed' call with TARGET_SIGNAL_0 anyway. */ - tp->stop_signal = TARGET_SIGNAL_0; + tp->suspend.stop_signal = TARGET_SIGNAL_0; inf_state->stop_pc = stop_pc; @@ -6108,13 +6123,16 @@ save_inferior_thread_state (void) /* Restore inferior session state to INF_STATE. */ void -restore_inferior_thread_state (struct inferior_thread_state *inf_state) +restore_infcall_suspend_state (struct infcall_suspend_state *inf_state) { struct thread_info *tp = inferior_thread (); + struct inferior *inf = current_inferior (); struct regcache *regcache = get_current_regcache (); struct gdbarch *gdbarch = get_regcache_arch (regcache); - tp->stop_signal = inf_state->stop_signal; + tp->suspend = inf_state->thread_suspend; + inf->suspend = inf_state->inferior_suspend; + stop_pc = inf_state->stop_pc; if (inf_state->siginfo_gdbarch == gdbarch) @@ -6133,23 +6151,24 @@ restore_inferior_thread_state (struct inferior_thread_state *inf_state) /* NB: The register write goes through to the target. */ regcache_cpy (regcache, inf_state->registers); - discard_inferior_thread_state (inf_state); + discard_infcall_suspend_state (inf_state); } static void -do_restore_inferior_thread_state_cleanup (void *state) +do_restore_infcall_suspend_state_cleanup (void *state) { - restore_inferior_thread_state (state); + restore_infcall_suspend_state (state); } struct cleanup * -make_cleanup_restore_inferior_thread_state (struct inferior_thread_state *inf_state) +make_cleanup_restore_infcall_suspend_state + (struct infcall_suspend_state *inf_state) { - return make_cleanup (do_restore_inferior_thread_state_cleanup, inf_state); + return make_cleanup (do_restore_infcall_suspend_state_cleanup, inf_state); } void -discard_inferior_thread_state (struct inferior_thread_state *inf_state) +discard_infcall_suspend_state (struct infcall_suspend_state *inf_state) { regcache_xfree (inf_state->registers); xfree (inf_state->siginfo_data); @@ -6157,33 +6176,19 @@ discard_inferior_thread_state (struct inferior_thread_state *inf_state) } struct regcache * -get_inferior_thread_state_regcache (struct inferior_thread_state *inf_state) +get_infcall_suspend_state_regcache (struct infcall_suspend_state *inf_state) { return inf_state->registers; } -/* Session related state for inferior function calls. - These are the additional bits of state that need to be restored - when an inferior function call successfully completes. +/* infcall_control_state contains state regarding gdb's control of the + inferior itself like stepping control. It also contains session state like + the user's currently selected frame. */ - Keep the fields in order as present in their original structures. */ - -struct inferior_status +struct infcall_control_state { - /* Direct copies of the struct thread_info fields: */ - CORE_ADDR step_range_start; - CORE_ADDR step_range_end; - struct frame_id step_frame_id; - struct frame_id step_stack_frame_id; - int trap_expected; - int proceed_to_finish; - int in_infcall; - enum step_over_calls_kind step_over_calls; - int stop_step; - bpstat stop_bpstat; - - /* Direct copies of the struct inferior fields: */ - int stop_soon; + struct thread_control_state thread_control; + struct inferior_control_state inferior_control; /* Other fields: */ enum stop_stack_kind stop_stack_dummy; @@ -6197,33 +6202,21 @@ struct inferior_status /* Save all of the information associated with the inferior<==>gdb connection. */ -struct inferior_status * -save_inferior_status (void) +struct infcall_control_state * +save_infcall_control_state (void) { - struct inferior_status *inf_status = XMALLOC (struct inferior_status); + struct infcall_control_state *inf_status = xmalloc (sizeof (*inf_status)); struct thread_info *tp = inferior_thread (); struct inferior *inf = current_inferior (); - /* Direct copies of the struct thread_info fields: */ - inf_status->step_range_start = tp->step_range_start; - inf_status->step_range_end = tp->step_range_end; - inf_status->step_frame_id = tp->step_frame_id; - inf_status->step_stack_frame_id = tp->step_stack_frame_id; - inf_status->trap_expected = tp->trap_expected; - inf_status->proceed_to_finish = tp->proceed_to_finish; - inf_status->in_infcall = tp->in_infcall; - inf_status->step_over_calls = tp->step_over_calls; - inf_status->stop_step = tp->stop_step; - - /* Save original bpstat chain here; replace it with copy of chain. - If caller's caller is walking the chain, they'll be happier if we - hand them back the original chain when restore_inferior_status is - called. */ - inf_status->stop_bpstat = tp->stop_bpstat; - tp->stop_bpstat = bpstat_copy (tp->stop_bpstat); + inf_status->thread_control = tp->control; + inf_status->inferior_control = inf->control; - /* Direct copies of the struct inferior fields: */ - inf_status->stop_soon = inf->stop_soon; + /* Save original bpstat chain to INF_STATUS; replace it in TP with copy of + chain. If caller's caller is walking the chain, they'll be happier if we + hand them back the original chain when restore_infcall_control_state is + called. */ + tp->control.stop_bpstat = bpstat_copy (tp->control.stop_bpstat); /* Other fields: */ inf_status->stop_stack_dummy = stop_stack_dummy; @@ -6259,29 +6252,16 @@ restore_selected_frame (void *args) /* Restore inferior session state to INF_STATUS. */ void -restore_inferior_status (struct inferior_status *inf_status) +restore_infcall_control_state (struct infcall_control_state *inf_status) { struct thread_info *tp = inferior_thread (); struct inferior *inf = current_inferior (); - /* Direct copies of the struct thread_info fields: */ - tp->step_range_start = inf_status->step_range_start; - tp->step_range_end = inf_status->step_range_end; - tp->step_frame_id = inf_status->step_frame_id; - tp->step_stack_frame_id = inf_status->step_stack_frame_id; - tp->trap_expected = inf_status->trap_expected; - tp->proceed_to_finish = inf_status->proceed_to_finish; - tp->in_infcall = inf_status->in_infcall; - tp->step_over_calls = inf_status->step_over_calls; - tp->stop_step = inf_status->stop_step; - /* Handle the bpstat_copy of the chain. */ - bpstat_clear (&tp->stop_bpstat); - tp->stop_bpstat = inf_status->stop_bpstat; - inf_status->stop_bpstat = NULL; + bpstat_clear (&tp->control.stop_bpstat); - /* Direct copies of the struct inferior fields: */ - inf->stop_soon = inf_status->stop_soon; + tp->control = inf_status->thread_control; + inf->control = inf_status->inferior_control; /* Other fields: */ stop_stack_dummy = inf_status->stop_stack_dummy; @@ -6306,22 +6286,23 @@ restore_inferior_status (struct inferior_status *inf_status) } static void -do_restore_inferior_status_cleanup (void *sts) +do_restore_infcall_control_state_cleanup (void *sts) { - restore_inferior_status (sts); + restore_infcall_control_state (sts); } struct cleanup * -make_cleanup_restore_inferior_status (struct inferior_status *inf_status) +make_cleanup_restore_infcall_control_state + (struct infcall_control_state *inf_status) { - return make_cleanup (do_restore_inferior_status_cleanup, inf_status); + return make_cleanup (do_restore_infcall_control_state_cleanup, inf_status); } void -discard_inferior_status (struct inferior_status *inf_status) +discard_infcall_control_state (struct infcall_control_state *inf_status) { - /* See save_inferior_status for info on stop_bpstat. */ - bpstat_clear (&inf_status->stop_bpstat); + /* See save_infcall_control_state for info on stop_bpstat. */ + bpstat_clear (&inf_status->thread_control.stop_bpstat); xfree (inf_status); } -- cgit v1.2.1