From 14cd51f7793a9ce07bc435069f57269450141363 Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Fri, 16 Apr 1999 01:35:26 +0000 Subject: Initial revision --- gdb/monitor.h | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 247 insertions(+) create mode 100644 gdb/monitor.h (limited to 'gdb/monitor.h') diff --git a/gdb/monitor.h b/gdb/monitor.h new file mode 100644 index 00000000000..4ccddd59e6b --- /dev/null +++ b/gdb/monitor.h @@ -0,0 +1,247 @@ +/* Definitions for remote debugging interface for ROM monitors. + Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc. + Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +*/ + +#include "serial.h" + +/* This structure describes the strings necessary to give small command + sequences to the monitor, and parse the response. + + CMD is the actual command typed at the monitor. Usually this has + embedded sequences ala printf, which are substituted with the + arguments appropriate to that type of command. Ie: to examine a + register, we substitute the register name for the first arg. To + modify memory, we substitute the memory location and the new + contents for the first and second args, etc... + + RESP_DELIM used to home in on the response string, and is used to + disambiguate the answer within the pile of text returned by the + monitor. This should be a unique string that immediately precedes + the answer. Ie: if your monitor prints out `PC: 00000001= ' in + response to asking for the PC, you should use `: ' as the + RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to + be ignored, or has no particular leading text. + + TERM is the string that the monitor outputs to indicate that it is + idle, and waiting for input. This is usually a prompt of some + sort. In the previous example, it would be `= '. It is important + that TERM really means that the monitor is idle, otherwise GDB may + try to type at it when it isn't ready for input. This is a problem + because many monitors cannot deal with type-ahead. TERM may be + NULL if the normal prompt is output. + + TERM_CMD is used to quit out of the subcommand mode and get back to + the main prompt. TERM_CMD may be NULL if it isn't necessary. It + will also be ignored if TERM is NULL. */ + +struct memrw_cmd +{ + char *cmdb; /* Command to send for byte read/write */ + char *cmdw; /* Command for word (16 bit) read/write */ + char *cmdl; /* Command for long (32 bit) read/write */ + char *cmdll; /* Command for long long (64 bit) read/write */ + char *resp_delim; /* String just prior to the desired value */ + char *term; /* Terminating string to search for */ + char *term_cmd; /* String to get out of sub-mode (if necessary) */ +}; + +struct regrw_cmd +{ + char *cmd; /* Command to send for reg read/write */ + char *resp_delim; /* String (actually a regexp if getmem) just + prior to the desired value */ + char *term; /* Terminating string to search for */ + char *term_cmd; /* String to get out of sub-mode (if necessary) */ +}; + +struct monitor_ops +{ + int flags; /* See below */ + char **init; /* List of init commands. NULL terminated. */ + char *cont; /* continue command */ + char *step; /* single step */ + char *stop; /* Interrupt program string */ + char *set_break; /* set a breakpoint */ + char *clr_break; /* clear a breakpoint */ + char *clr_all_break; /* Clear all breakpoints */ + char *fill; /* Memory fill cmd (addr len val) */ + struct memrw_cmd setmem; /* set memory to a value */ + struct memrw_cmd getmem; /* display memory */ + struct regrw_cmd setreg; /* set a register */ + struct regrw_cmd getreg; /* get a register */ + /* Some commands can dump a bunch of registers + at once. This comes as a set of REG=VAL + pairs. This should be called for each pair + of registers that we can parse to supply + GDB with the value of a register. */ + char *dump_registers; /* Command to dump all regs at once */ + char *register_pattern; /* Pattern that picks out register from reg dump */ + void (*supply_register) PARAMS ((char *name, int namelen, + char *val, int vallen)); + void (*load_routine) PARAMS ((serial_t desc, char *file, + int hashmark)); /* Download routine */ + int (*dumpregs) PARAMS((void)) ; /* routine to dump all registers */ + int (*continue_hook) PARAMS((void)) ; /* Emit the continue command */ + int (*wait_filter) PARAMS((char * buf, /* Maybe contains registers */ + int bufmax , + int * response_length, + struct target_waitstatus * status)) ; + char *load; /* load command */ + char *loadresp; /* Response to load command */ + char *prompt; /* monitor command prompt */ + char *line_term; /* end-of-command delimitor */ + char *cmd_end; /* optional command terminator */ + struct target_ops *target; /* target operations */ + int stopbits; /* number of stop bits */ + char **regnames; /* array of register names in ascii */ + int magic; /* Check value */ +}; + +/* The monitor ops magic number, used to detect if an ops structure doesn't + have the right number of entries filled in. */ + +#define MONITOR_OPS_MAGIC 600925 + +/* Flag definitions. */ + +/* If set, then clear breakpoint command uses address, otherwise it + uses an index returned by the monitor. */ + +#define MO_CLR_BREAK_USES_ADDR 0x1 + +/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE + as args, else it uses STARTADDR, LENGTH, VALUE as args. */ + +#define MO_FILL_USES_ADDR 0x2 + +/* If set, then monitor doesn't automatically supply register dump + when coming back after a continue. */ + +#define MO_NEED_REGDUMP_AFTER_CONT 0x4 + +/* getmem needs start addr and end addr */ + +#define MO_GETMEM_NEEDS_RANGE 0x8 + +/* getmem can only read one loc at a time */ + +#define MO_GETMEM_READ_SINGLE 0x10 + +/* handle \r\n combinations */ + +#define MO_HANDLE_NL 0x20 + +/* don't expect echos in monitor_open */ + +#define MO_NO_ECHO_ON_OPEN 0x40 + +/* If set, send break to stop monitor */ + +#define MO_SEND_BREAK_ON_STOP 0x80 + +/* If set, target sends an ACK after each S-record */ + +#define MO_SREC_ACK 0x100 + +/* Allow 0x prefix on addresses retured from monitor */ + +#define MO_HEX_PREFIX 0x200 + +/* Some monitors require a different command when starting a program */ + +#define MO_RUN_FIRST_TIME 0x400 + +/* Don't expect echos when getting memory */ + +#define MO_NO_ECHO_ON_SETMEM 0x800 + +/* If set, then register store command expects value BEFORE regname */ + +#define MO_REGISTER_VALUE_FIRST 0x1000 + +/* If set, then the monitor displays registers as pairs. */ + +#define MO_32_REGS_PAIRED 0x2000 + +/* If set, then register setting happens interactively. */ + +#define MO_SETREG_INTERACTIVE 0x4000 + +/* If set, then memory setting happens interactively. */ + +#define MO_SETMEM_INTERACTIVE 0x8000 + +/* If set, then memory dumps are always on 16-byte boundaries, even + when less is desired. */ + +#define MO_GETMEM_16_BOUNDARY 0x10000 + +/* If set, then the monitor numbers its breakpoints starting from 1. */ + +#define MO_CLR_BREAK_1_BASED 0x20000 + +/* If set, then the monitor acks srecords with a plus sign. */ + +#define MO_SREC_ACK_PLUS 0x40000 + +/* If set, then the monitor "acks" srecords with rotating lines. */ + +#define MO_SREC_ACK_ROTATE 0x80000 + +/* If set, then remove useless address bits from memory addresses. */ + +#define MO_ADDR_BITS_REMOVE 0x100000 + +/* If set, then display target program output if prefixed by ^O. */ + +#define MO_PRINT_PROGRAM_OUTPUT 0x200000 + +/* Some dump bytes commands align the first data with the preceeding +16 byte boundary. Some print blanks and start at the exactly the +requested boundary. */ + +#define MO_EXACT_DUMPADDR 0x400000 + +/* Rather entering and exiting the write memory dialog for each word byte, + we can save time by transferring the whole block without exiting + the memory editing mode. You only need to worry about this + if you are doing memory downloading. + This engages a new write function registered with dcache. + */ +#define MO_HAS_BLOCKWRITES 0x800000 + +#define SREC_SIZE 160 + +extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, + int from_tty)); +extern void monitor_close PARAMS ((int quitting)); +extern char *monitor_supply_register PARAMS ((int regno, char *valstr)); +extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen)); +extern int monitor_expect_prompt PARAMS ((char *buf, int buflen)); +extern void monitor_printf PARAMS ((char *, ...)) + ATTR_FORMAT(printf, 1, 2); +extern void monitor_printf_noecho PARAMS ((char *, ...)) + ATTR_FORMAT(printf, 1, 2); +extern void monitor_write PARAMS ((char *buf, int buflen)); +extern int monitor_readchar PARAMS ((void)); +extern char *monitor_get_dev_name PARAMS ((void)); +extern void init_monitor_ops PARAMS ((struct target_ops *)); +extern int monitor_dump_reg_block PARAMS((char * dump_cmd)) ; +extern void flush_monitor_dcache PARAMS ((void)); -- cgit v1.2.1