From 1f5de7484fa5977a31f02b218a1b745ea3d908bd Mon Sep 17 00:00:00 2001 From: Michael Snyder Date: Mon, 10 Jan 2011 20:38:45 +0000 Subject: 2011-01-10 Michael Snyder * nto-procfs.c: Comment cleanup, mostly periods and spaces. * nto-tdep.c: Ditto. * nto-tdep.h: Ditto. * objc-exp.y: Ditto. * objc-lang.c: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * observer.c: Ditto. * opencl-lang.c: Ditto. * osabi.c: Ditto. * parse.c: Ditto. * parser-defs.h: Ditto. * p-exp.y: Ditto. * p-lang.c: Ditto. * posix-hdep.c: Ditto. * ppcbug-rom.c: Ditto. * ppc-linux-nat.c: Ditto. * ppc-linux-tdep.c: Ditto. * ppc-linux-tdep.h: Ditto. * ppcnbsd-tdep.c: Ditto. * ppcobsd-tdep.c: Ditto. * ppcobsd-tdep.h: Ditto. * ppc-sysv-tdep.c: Ditto. * ppc-tdep.h: Ditto. * printcmd.c: Ditto. * proc-abi.c: Ditto. * proc-flags.c: Ditto. * procfs.c: Ditto. * proc-utils.h: Ditto. * progspace.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * ravenscar-sparc-thread.c: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote.c: Ditto. * remote-fileio.c: Ditto. * remote-fileio.h: Ditto. * remote.h: Ditto. * remote-m32r-sdi.c: Ditto. * remote-mips.c: Ditto. * remote-sim.c: Ditto. * rs6000-aix-tdep.c: Ditto. * rs6000-nat.c: Ditto. * rs6000-tdep.c: Ditto. --- gdb/remote-mips.c | 325 +++++++++++++++++++++++++++++------------------------- 1 file changed, 176 insertions(+), 149 deletions(-) (limited to 'gdb/remote-mips.c') diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c index 7ea13656be2..bc82bc8c514 100644 --- a/gdb/remote-mips.c +++ b/gdb/remote-mips.c @@ -299,11 +299,15 @@ enum mips_monitor_type /* IDT/SIM monitor being used: */ MON_IDT, /* PMON monitor being used: */ - MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */ - MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */ - MON_LSI, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */ + MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] + Algorithmics Ltd. Nov 9 1995 17:19:50 */ + MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] + Risq Modular Systems, + Thu Jun 6 09:28:40 PDT 1996 */ + MON_LSI, /* 4.3.12 [EB,FP], + LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */ MON_ROCKHOPPER, - /* Last and unused value, for sizing vectors, etc. */ + /* Last and unused value, for sizing vectors, etc. */ MON_LAST }; static enum mips_monitor_type mips_monitor = MON_LAST; @@ -325,7 +329,7 @@ static char *mips_monitor_prompt; /* Set to 1 if the target is open. */ static int mips_is_open; -/* Currently active target description (if mips_is_open == 1) */ +/* Currently active target description (if mips_is_open == 1). */ static struct target_ops *current_ops; /* Set to 1 while the connection is being initialized. */ @@ -375,25 +379,25 @@ static FILE *tftp_file; via ^C. */ static int interrupt_count; -/* If non-zero, means that the target is running. */ +/* If non-zero, means that the target is running. */ static int mips_wait_flag = 0; -/* If non-zero, monitor supports breakpoint commands. */ +/* If non-zero, monitor supports breakpoint commands. */ static int monitor_supports_breakpoints = 0; /* Data cache header. */ -#if 0 /* not used (yet?) */ +#if 0 /* not used (yet?) */ static DCACHE *mips_dcache; #endif -/* Non-zero means that we've just hit a read or write watchpoint */ +/* Non-zero means that we've just hit a read or write watchpoint. */ static int hit_watchpoint; /* Table of breakpoints/watchpoints (used only on LSI PMON target). The table is indexed by a breakpoint number, which is an integer - from 0 to 255 returned by the LSI PMON when a breakpoint is set. - */ + from 0 to 255 returned by the LSI PMON when a breakpoint is set. */ + #define MAX_LSI_BREAKPOINTS 256 struct lsi_breakpoint_info { @@ -406,15 +410,21 @@ lsi_breakpoints[MAX_LSI_BREAKPOINTS]; /* Error/warning codes returned by LSI PMON for breakpoint commands. Warning values may be ORed together; error values may not. */ -#define W_WARN 0x100 /* This bit is set if the error code is a warning */ -#define W_MSK 0x101 /* warning: Range feature is supported via mask */ -#define W_VAL 0x102 /* warning: Value check is not supported in hardware */ -#define W_QAL 0x104 /* warning: Requested qualifiers are not supported in hardware */ - -#define E_ERR 0x200 /* This bit is set if the error code is an error */ +#define W_WARN 0x100 /* This bit is set if the error code + is a warning */ +#define W_MSK 0x101 /* warning: Range feature is supported + via mask */ +#define W_VAL 0x102 /* warning: Value check is not + supported in hardware */ +#define W_QAL 0x104 /* warning: Requested qualifiers are + not supported in hardware */ + +#define E_ERR 0x200 /* This bit is set if the error code + is an error */ #define E_BPT 0x200 /* error: No such breakpoint number */ #define E_RGE 0x201 /* error: Range is not supported */ -#define E_QAL 0x202 /* error: The requested qualifiers can not be used */ +#define E_QAL 0x202 /* error: The requested qualifiers can + not be used */ #define E_OUT 0x203 /* error: Out of hardware resources */ #define E_NON 0x204 /* error: Hardware breakpoint not supported */ @@ -482,7 +492,7 @@ mips_error (char *string,...) va_start (args, string); target_terminal_ours (); - wrap_here (""); /* Force out any buffered output */ + wrap_here (""); /* Force out any buffered output. */ gdb_flush (gdb_stdout); if (error_pre_print) fputs_filtered (error_pre_print, gdb_stderr); @@ -563,8 +573,7 @@ read_hex_value (const char *p, ULONGEST *result) /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if - timed out. TIMEOUT specifies timeout value in seconds. - */ + timed out. TIMEOUT specifies timeout value in seconds. */ static int mips_expect_timeout (const char *string, int timeout) @@ -584,7 +593,7 @@ mips_expect_timeout (const char *string, int timeout) int c; /* Must use serial_readchar() here cuz mips_readchar would get - confused if we were waiting for the mips_monitor_prompt... */ + confused if we were waiting for the mips_monitor_prompt... */ c = serial_readchar (mips_desc, timeout); @@ -619,8 +628,7 @@ mips_expect_timeout (const char *string, int timeout) /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if timed out. The timeout value is hard-coded to 2 seconds. Use - mips_expect_timeout if a different timeout value is needed. - */ + mips_expect_timeout if a different timeout value is needed. */ static int mips_expect (const char *string) @@ -649,7 +657,7 @@ mips_readchar (int timeout) static int state = 0; int mips_monitor_prompt_len = strlen (mips_monitor_prompt); - { /* FIXME this whole block is dead code! */ + { /* FIXME this whole block is dead code! */ int i; i = timeout; @@ -661,7 +669,7 @@ mips_readchar (int timeout) timeout = 1; ch = serial_readchar (mips_desc, timeout); - if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off */ + if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off. */ { target_mourn_inferior (); error ("Watchdog has expired. Target detached.\n"); @@ -694,7 +702,8 @@ mips_readchar (int timeout) if (remote_debug > 0) /* Don't use _filtered; we can't deal with a QUIT out of target_wait, and I think this might be called from there. */ - fprintf_unfiltered (gdb_stdlog, "Reinitializing MIPS debugging mode\n"); + fprintf_unfiltered (gdb_stdlog, + "Reinitializing MIPS debugging mode\n"); mips_need_reply = 0; mips_initialize (); @@ -702,7 +711,7 @@ mips_readchar (int timeout) state = 0; /* At this point, about the only thing we can do is abort the command - in progress and get back to command level as quickly as possible. */ + in progress and get back to command level as quickly as possible. */ error ("Remote board reset, debug protocol re-initialized."); } @@ -742,7 +751,7 @@ mips_receive_header (unsigned char *hdr, int *pgarbage, int ch, int timeout) what the program is outputting, if the debugging is being done on the console port. Don't use _filtered: we can't deal with a QUIT out of target_wait and - buffered target output confuses the user. */ + buffered target output confuses the user. */ if (!mips_initializing || remote_debug > 0) { if (isprint (ch) || isspace (ch)) @@ -756,13 +765,14 @@ mips_receive_header (unsigned char *hdr, int *pgarbage, int ch, int timeout) gdb_flush (gdb_stdtarg); } - /* Only count unprintable characters. */ + /* Only count unprintable characters. */ if (! (isprint (ch) || isspace (ch))) (*pgarbage) += 1; if (mips_syn_garbage > 0 && *pgarbage > mips_syn_garbage) - mips_error ("Debug protocol failure: more than %d characters before a sync.", + mips_error ("Debug protocol failure: more " + "than %d characters before a sync.", mips_syn_garbage); } } @@ -793,7 +803,8 @@ mips_receive_header (unsigned char *hdr, int *pgarbage, int ch, int timeout) for success, -1 for timeout, -2 for error. */ static int -mips_receive_trailer (unsigned char *trlr, int *pgarbage, int *pch, int timeout) +mips_receive_trailer (unsigned char *trlr, int *pgarbage, + int *pch, int timeout) { int i; int ch; @@ -918,7 +929,7 @@ mips_send_packet (const char *s, int get_ack) int i; /* Ignore any errors raised whilst attempting to ignore - packet. */ + packet. */ len = HDR_GET_LEN (hdr); @@ -934,7 +945,7 @@ mips_send_packet (const char *s, int get_ack) } if (rch == SERIAL_TIMEOUT) break; - /* ignore the character */ + /* Ignore the character. */ } if (i == len) @@ -942,7 +953,7 @@ mips_send_packet (const char *s, int get_ack) remote_timeout); /* We don't bother checking the checksum, or providing an - ACK to the packet. */ + ACK to the packet. */ continue; } @@ -1042,7 +1053,7 @@ mips_receive_packet (char *buff, int throw_error, int timeout) if (len == 0) { /* Ignore the error condition, since we are going to - ignore the packet anyway. */ + ignore the packet anyway. */ (void) mips_receive_trailer (trlr, &garbage, &ch, timeout); } /* Don't use _filtered; we can't deal with a QUIT out of @@ -1245,7 +1256,8 @@ mips_request (int cmd, { if (mips_need_reply) internal_error (__FILE__, __LINE__, - _("mips_request: Trying to send command before reply")); + _("mips_request: Trying to send " + "command before reply")); /* 'T' sets a register to a 64-bit value, so make sure we use the right conversion function. */ if (cmd == 'T') @@ -1334,7 +1346,7 @@ mips_enter_debug (void) if (mips_monitor != MON_IDT) mips_send_command ("debug\r", 0); - else /* assume IDT monitor by default */ + else /* Assume IDT monitor by default. */ mips_send_command ("db tty0\r", 0); sleep (1); @@ -1343,7 +1355,7 @@ mips_enter_debug (void) /* We don't need to absorb any spurious characters here, since the mips_receive_header will eat up a reasonable number of characters whilst looking for the SYN, however this avoids the "garbage" - being displayed to the user. */ + being displayed to the user. */ if (mips_monitor != MON_IDT) mips_expect ("\r"); @@ -1414,24 +1426,25 @@ mips_initialize (void) /* Force the system into the monitor. After this we *should* be at the mips_monitor_prompt. */ if (mips_monitor != MON_IDT) - j = 0; /* start by checking if we are already at the prompt */ + j = 0; /* Start by checking if we are already + at the prompt. */ else - j = 1; /* start by sending a break */ + j = 1; /* Start by sending a break. */ for (; j <= 4; j++) { switch (j) { - case 0: /* First, try sending a CR */ + case 0: /* First, try sending a CR. */ serial_flush_input (mips_desc); serial_write (mips_desc, "\r", 1); break; - case 1: /* First, try sending a break */ + case 1: /* First, try sending a break. */ serial_send_break (mips_desc); break; - case 2: /* Then, try a ^C */ + case 2: /* Then, try a ^C. */ serial_write (mips_desc, "\003", 1); break; - case 3: /* Then, try escaping from download */ + case 3: /* Then, try escaping from download. */ { if (mips_monitor != MON_IDT) { @@ -1440,9 +1453,9 @@ mips_initialize (void) /* We shouldn't need to send multiple termination sequences, since the target performs line (or block) reads, and then processes those - packets. In-case we were downloading a large packet + packets. In-case we were downloading a large packet we flush the output buffer before inserting a - termination sequence. */ + termination sequence. */ serial_flush_output (mips_desc); sprintf (tbuff, "\r/E/E\r"); serial_write (mips_desc, tbuff, 6); @@ -1458,8 +1471,7 @@ mips_initialize (void) out is to send enough termination packets (8 bytes) to fill up and then overflow the largest size S-record (255 bytes in this case). This amounts to - 256/8 + 1 packets. - */ + 256/8 + 1 packets. */ mips_make_srec (srec, '7', 0, NULL, 0); @@ -1469,7 +1481,7 @@ mips_initialize (void) if (serial_readchar (mips_desc, 0) >= 0) break; /* Break immediatly if we get something from - the board. */ + the board. */ } } } @@ -1497,7 +1509,7 @@ mips_initialize (void) /* Delete all the current breakpoints: */ mips_send_command ("db *\r", -1); /* NOTE: PMON does not have breakpoint support through the - "debug" mode, only at the monitor command-line. */ + "debug" mode, only at the monitor command-line. */ } mips_enter_debug (); @@ -1532,15 +1544,15 @@ common_open (struct target_ops *ops, char *name, int from_tty, char **argv; if (name == 0) - error ( - "To open a MIPS remote debugging connection, you need to specify what serial\n\ -device is attached to the target board (e.g., /dev/ttya).\n" - "If you want to use TFTP to download to the board, specify the name of a\n" - "temporary file to be used by GDB for downloads as the second argument.\n" - "This filename must be in the form host:filename, where host is the name\n" - "of the host running the TFTP server, and the file must be readable by the\n" - "world. If the local name of the temporary file differs from the name as\n" - "seen from the board via TFTP, specify that name as the third parameter.\n"); + error (_("\ +To open a MIPS remote debugging connection, you need to specify what\n\ +serial device is attached to the target board (e.g., /dev/ttya).\n\ +If you want to use TFTP to download to the board, specify the name of a\n\ +temporary file to be used by GDB for downloads as the second argument.\n\ +This filename must be in the form host:filename, where host is the name\n\ +of the host running the TFTP server, and the file must be readable by the\n\ +world. If the local name of the temporary file differs from the name as\n\ +seen from the board via TFTP, specify that name as the third parameter.\n")); /* Parse the serial port name, the optional TFTP name, and the optional local TFTP name. */ @@ -1548,10 +1560,10 @@ device is attached to the target board (e.g., /dev/ttya).\n" make_cleanup_freeargv (argv); serial_port_name = xstrdup (argv[0]); - if (argv[1]) /* remote TFTP name specified? */ + if (argv[1]) /* Remote TFTP name specified? */ { remote_name = argv[1]; - if (argv[2]) /* local TFTP filename specified? */ + if (argv[2]) /* Local TFTP filename specified? */ local_name = argv[2]; } @@ -1600,9 +1612,9 @@ device is attached to the target board (e.g., /dev/ttya).\n" xfree (tftp_localname); if (local_name == NULL) if ((local_name = strchr (remote_name, ':')) != NULL) - local_name++; /* skip over the colon */ + local_name++; /* Skip over the colon. */ if (local_name == NULL) - local_name = remote_name; /* local name same as remote name */ + local_name = remote_name; /* Local name same as remote name. */ tftp_name = xstrdup (remote_name); tftp_localname = xstrdup (local_name); tftp_in_use = 1; @@ -1840,21 +1852,23 @@ mips_wait (struct target_ops *ops, /* On returning from a continue, the PMON monitor seems to start echoing back the messages we send prior to sending back the - ACK. The code can cope with this, but to try and avoid the + ACK. The code can cope with this, but to try and avoid the unnecessary serial traffic, and "spurious" characters displayed - to the user, we cheat and reset the debug protocol. The problems + to the user, we cheat and reset the debug protocol. The problems seems to be caused by a check on the number of arguments, and the command length, within the monitor causing it to echo the command - as a bad packet. */ + as a bad packet. */ if (mips_monitor == MON_PMON) { mips_exit_debug (); mips_enter_debug (); } - /* See if we got back extended status. If so, pick out the pc, fp, sp, etc... */ + /* See if we got back extended status. If so, pick out the pc, fp, + sp, etc... */ - nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s", + nfields = sscanf (buff, + "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s", pc_string, fp_string, sp_string, flags); if (nfields >= 3 && read_hex_value (pc_string, &rpc) @@ -1883,12 +1897,13 @@ mips_wait (struct target_ops *ops, if (strcmp (target_shortname, "lsi") == 0) { #if 0 - /* If this is an LSI PMON target, see if we just hit a hardrdware watchpoint. - Right now, PMON doesn't give us enough information to determine which - breakpoint we hit. So we have to look up the PC in our own table - of breakpoints, and if found, assume it's just a normal instruction - fetch breakpoint, not a data watchpoint. FIXME when PMON - provides some way to tell us what type of breakpoint it is. */ + /* If this is an LSI PMON target, see if we just hit a + hardrdware watchpoint. Right now, PMON doesn't give us + enough information to determine which breakpoint we hit. So + we have to look up the PC in our own table of breakpoints, + and if found, assume it's just a normal instruction fetch + breakpoint, not a data watchpoint. FIXME when PMON provides + some way to tell us what type of breakpoint it is. */ int i; CORE_ADDR pc = regcache_read_pc (get_current_regcache ()); @@ -2022,8 +2037,8 @@ mips_fetch_registers (struct target_ops *ops, else { /* Unfortunately the PMON version in the Vr4300 board has been - compiled without the 64bit register access commands. This - means we cannot get hold of the full register width. */ + compiled without the 64bit register access commands. This + means we cannot get hold of the full register width. */ if (mips_monitor == MON_DDB || mips_monitor == MON_ROCKHOPPER) val = mips_request ('t', pmon_reg, 0, &err, mips_receive_wait, NULL); @@ -2096,7 +2111,7 @@ mips_fetch_word (CORE_ADDR addr, unsigned int *valp) success. If OLD_CONTENTS is non-NULL, put the old contents of that memory location there. */ -/* FIXME! make sure only 32-bit quantities get stored! */ +/* FIXME! make sure only 32-bit quantities get stored! */ static int mips_store_word (CORE_ADDR addr, unsigned int val, int *old_contents) { @@ -2139,7 +2154,7 @@ mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write, int status; /* PMON targets do not cope well with 64 bit addresses. Mask the - value down to 32 bits. */ + value down to 32 bits. */ if (mask_address_p) memaddr &= (CORE_ADDR) 0xffffffff; @@ -2173,10 +2188,11 @@ mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write, if (mips_fetch_word (addr + (count - 1) * 4, &val)) return 0; - store_unsigned_integer (&buffer[(count - 1) * 4], 4, byte_order, val); + store_unsigned_integer (&buffer[(count - 1) * 4], + 4, byte_order, val); } - /* Copy data to be written over corresponding part of buffer */ + /* Copy data to be written over corresponding part of buffer. */ memcpy ((char *) buffer + (memaddr & 3), myaddr, len); @@ -2188,7 +2204,7 @@ mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write, word = extract_unsigned_integer (&buffer[i * 4], 4, byte_order); status = mips_store_word (addr, word, NULL); - /* Report each kilobyte (we download 32-bit words at a time) */ + /* Report each kilobyte (we download 32-bit words at a time). */ if (i % 256 == 255) { printf_unfiltered ("*"); @@ -2206,7 +2222,7 @@ mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write, } else { - /* Read all the longwords */ + /* Read all the longwords. */ for (i = 0; i < count; i++, addr += 4) { unsigned int val; @@ -2257,9 +2273,9 @@ mips_kill (struct target_ops *ops) if (query (_("Interrupted while waiting for the program.\n\ Give up (and stop debugging it)? "))) { - /* Clean up in such a way that mips_close won't try to talk to the - board (it almost surely won't work since we weren't able to talk to - it). */ + /* Clean up in such a way that mips_close won't try to talk + to the board (it almost surely won't work since we + weren't able to talk to it). */ mips_wait_flag = 0; close_ports (); @@ -2399,7 +2415,7 @@ calculate_mask (CORE_ADDR addr, int len) /* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0 for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write - watchpoint. */ + watchpoint. */ int mips_insert_watchpoint (CORE_ADDR addr, int len, int type, @@ -2455,7 +2471,7 @@ mips_clear_breakpoint (CORE_ADDR addr, int len, enum break_type type) command. If there's no error, just return 0. If it's a warning, print the warning text and return 0. If it's an error, print the error text and return 1. is the address of the breakpoint - that was being set. is the error code returned by PMON. + that was being set. is the error code returned by PMON. This is a helper function for mips_common_breakpoint. */ static int @@ -2606,9 +2622,7 @@ mips_common_breakpoint: Bad response from remote board: %s", succesful completion, other values indicate various errors and warnings. - Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON. - - */ + Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON. */ if (type == BREAK_FETCH) /* instruction breakpoint */ { @@ -2654,8 +2668,9 @@ mips_common_breakpoint: Bad response from remote board: %s", /* On non-LSI targets, the breakpoint command has this form: 0x0 is a don't care mask for addresses. - is any combination of `r', `w', or `f' for read/write/fetch. - */ + is any combination of `r', `w', or `f' for + read/write/fetch. */ + unsigned long mask; mask = calculate_mask (addr, len); @@ -2680,7 +2695,8 @@ mips_common_breakpoint: Bad response from remote board: %s", flags = "f"; break; default: - internal_error (__FILE__, __LINE__, _("failed internal consistency check")); + internal_error (__FILE__, __LINE__, + _("failed internal consistency check")); } cmd = 'B'; @@ -2746,7 +2762,8 @@ send_srec (char *srec, int len, CORE_ADDR addr) case 0x6: /* ACK */ return; case 0x15: /* NACK */ - fprintf_unfiltered (gdb_stderr, "Download got a NACK at byte %s! Retrying.\n", + fprintf_unfiltered (gdb_stderr, + "Download got a NACK at byte %s! Retrying.\n", paddress (target_gdbarch, addr)); continue; default: @@ -2755,7 +2772,7 @@ send_srec (char *srec, int len, CORE_ADDR addr) } } -/* Download a binary file by converting it to S records. */ +/* Download a binary file by converting it to S records. */ static void mips_load_srec (char *args) @@ -2792,7 +2809,7 @@ mips_load_srec (char *args) { unsigned int numbytes; - /* FIXME! vma too small????? */ + /* FIXME! vma too small????? */ printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s->name, (long) s->vma, (long) (s->vma + bfd_get_section_size (s))); @@ -2836,7 +2853,7 @@ mips_load_srec (char *args) } /* - * mips_make_srec -- make an srecord. This writes each line, one at a + * mips_make_srec -- make an srecord. This writes each line, one at a * time, each with it's own header and trailer line. * An srecord looks like this: * @@ -2853,7 +2870,7 @@ mips_load_srec (char *args) * * Where * - length - * is the number of bytes following upto the checksum. Note that + * is the number of bytes following upto the checksum. Note that * this is not the number of chars following, since it takes two * chars to represent a byte. * - type @@ -2886,16 +2903,16 @@ mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, unsigned char checksum; int i; - /* Create the header for the srec. addr_size is the number of bytes in the address, - and 1 is the number of bytes in the count. */ + /* Create the header for the srec. addr_size is the number of bytes + in the address, and 1 is the number of bytes in the count. */ - /* FIXME!! bigger buf required for 64-bit! */ + /* FIXME!! bigger buf required for 64-bit! */ buf[0] = 'S'; buf[1] = type; buf[2] = len + 4 + 1; /* len + 4 byte address + 1 byte checksum */ - /* This assumes S3 style downloads (4byte addresses). There should + /* This assumes S3 style downloads (4byte addresses). There should probably be a check, or the code changed to make it more - explicit. */ + explicit. */ buf[3] = memaddr >> 24; buf[4] = memaddr >> 16; buf[5] = memaddr >> 8; @@ -2906,7 +2923,7 @@ mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, hexified data. It includes the length, address and the data portions of the packet. */ checksum = 0; - buf += 2; /* Point at length byte */ + buf += 2; /* Point at length byte. */ for (i = 0; i < len + 4 + 1; i++) checksum += *buf++; @@ -2916,8 +2933,8 @@ mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, } /* The following manifest controls whether we enable the simple flow - control support provided by the monitor. If enabled the code will - wait for an affirmative ACK between transmitting packets. */ + control support provided by the monitor. If enabled the code will + wait for an affirmative ACK between transmitting packets. */ #define DOETXACK (1) /* The PMON fast-download uses an encoded packet format constructed of @@ -2926,7 +2943,8 @@ mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, 'K' clear checksum 'C' compare checksum (12bit value, not included in checksum calculation) - 'S' define symbol name (for addr) terminated with "," and padded to 4char boundary + 'S' define symbol name (for addr) terminated with "," + and padded to 4char boundary 'Z' zero fill multiple of 3bytes 'B' byte (12bit encoded value, of 8bit data) 'A' address (36bit encoded value) @@ -2941,12 +2959,13 @@ mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr, The encoding of numbers is done in 6bit fields. The 6bit value is used to index into this string to get the specific character encoding for the value: */ -static char encoding[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,."; +static char encoding[] = + "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,."; /* Convert the number of bits required into an encoded number, 6bits at a time (range 0..63). Keep a checksum if required (passed - pointer non-NULL). The function returns the number of encoded - characters written into the buffer. */ + pointer non-NULL). The function returns the number of encoded + characters written into the buffer. */ static int pmon_makeb64 (unsigned long v, char *p, int n, int *chksum) @@ -2956,13 +2975,16 @@ pmon_makeb64 (unsigned long v, char *p, int n, int *chksum) if ((n % 12) != 0) { fprintf_unfiltered (gdb_stderr, - "Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n", n, (n == 1) ? "" : "s"); + "Fast encoding bitcount must be a " + "multiple of 12bits: %dbit%s\n", + n, (n == 1) ? "" : "s"); return (0); } if (n > 36) { fprintf_unfiltered (gdb_stderr, - "Fast encoding cannot process more than 36bits at the moment: %dbits\n", n); + "Fast encoding cannot process more " + "than 36bits at the moment: %dbits\n", n); return (0); } @@ -2991,7 +3013,7 @@ pmon_makeb64 (unsigned long v, char *p, int n, int *chksum) } /* Shorthand function (that could be in-lined) to output the zero-fill - escape sequence into the data stream. */ + escape sequence into the data stream. */ static int pmon_zeroset (int recsize, char **buff, int *amount, unsigned int *chksum) @@ -3015,7 +3037,7 @@ pmon_zeroset (int recsize, char **buff, int *amount, unsigned int *chksum) Return the total size of the record after adding the checksum escape, the checksum itself, and the trailing newline. - The checksum specified by *VALUE is zeroed out prior to returning. + The checksum specified by *VALUE is zeroed out prior to returning. Additionally, *BUF is updated to refer to the location just beyond the record elements added by this call. */ @@ -3029,7 +3051,7 @@ pmon_checkset (int recsize, char **buff, int *value) count = pmon_makeb64 (*value, (*buff + 2), 12, NULL); *buff += (count + 2); sprintf (*buff, "\n"); - *buff += 2; /* include zero terminator */ + *buff += 2; /* Include zero terminator. */ /* Forcing a checksum validation clears the sum: */ *value = 0; return (recsize + count + 3); @@ -3038,7 +3060,7 @@ pmon_checkset (int recsize, char **buff, int *value) /* Amount of padding we leave after at the end of the output buffer, for the checksum and line termination characters: */ #define CHECKSIZE (4 + 4 + 4 + 2) -/* zero-fill, checksum, transfer end and line termination space. */ +/* zero-fill, checksum, transfer end and line termination space. */ /* The amount of binary data loaded from the object file in a single operation: */ @@ -3046,8 +3068,8 @@ pmon_checkset (int recsize, char **buff, int *value) /* Maximum line of data accepted by the monitor: */ #define MAXRECSIZE (550) -/* NOTE: This constant depends on the monitor being used. This value - is for PMON 5.x on the Cogent Vr4300 board. */ +/* NOTE: This constant depends on the monitor being used. This value + is for PMON 5.x on the Cogent Vr4300 board. */ /* Create a FastLoad format record. @@ -3084,9 +3106,9 @@ pmon_make_fastrec (char **outbuf, unsigned char *inbuf, int *inptr, char *p = *outbuf; /* This is a simple check to ensure that our data will fit within - the maximum allowable record size. Each record output is 4bytes - in length. We must allow space for a pending zero fill command, - the record, and a checksum record. */ + the maximum allowable record size. Each record output is 4bytes + in length. We must allow space for a pending zero fill command, + the record, and a checksum record. */ while ((*recsize < (MAXRECSIZE - CHECKSIZE)) && ((inamount - *inptr) > 0)) { /* Process the binary data: */ @@ -3102,15 +3124,17 @@ pmon_make_fastrec (char **outbuf, unsigned char *inbuf, int *inptr, } else { - unsigned int value = ((inbuf[*inptr + 0] << 16) | (inbuf[*inptr + 1] << 8) | inbuf[*inptr + 2]); + unsigned int value = ((inbuf[*inptr + 0] << 16) + | (inbuf[*inptr + 1] << 8) + | (inbuf[*inptr + 2])); - /* Simple check for zero data. TODO: A better check would be + /* Simple check for zero data. TODO: A better check would be to check the last, and then the middle byte for being zero - (if the first byte is not). We could then check for + (if the first byte is not). We could then check for following runs of zeros, and if above a certain size it is worth the 4 or 8 character hit of the byte insertions used - to pad to the start of the zeroes. NOTE: This also depends - on the alignment at the end of the zero run. */ + to pad to the start of the zeroes. NOTE: This also depends + on the alignment at the end of the zero run. */ if (value == 0x00000000) { (*zerofill)++; @@ -3151,7 +3175,7 @@ pmon_check_ack (char *mesg) { fprintf_unfiltered (gdb_stderr, "Failed to receive valid ACK for %s\n", mesg); - return (-1); /* terminate the download */ + return (-1); /* Terminate the download. */ } } #endif /* DOETXACK */ @@ -3192,7 +3216,7 @@ mips_expect_download (char *string) { fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n"); if (tftp_in_use) - remove (tftp_localname); /* Remove temporary file */ + remove (tftp_localname); /* Remove temporary file. */ return 0; } else @@ -3211,7 +3235,7 @@ mips_expect_download (char *string) static void pmon_check_entry_address (char *entry_address, int final) { - char hexnumber[9]; /* includes '\0' space */ + char hexnumber[9]; /* Includes '\0' space. */ mips_expect_timeout (entry_address, tftp_in_use ? 15 : remote_timeout); sprintf (hexnumber, "%x", final); @@ -3226,7 +3250,7 @@ pmon_check_entry_address (char *entry_address, int final) static int pmon_check_total (int bintotal) { - char hexnumber[9]; /* includes '\0' space */ + char hexnumber[9]; /* Includes '\0' space. */ mips_expect ("\r\ntotal = 0x"); sprintf (hexnumber, "%x", bintotal); @@ -3244,7 +3268,7 @@ pmon_check_total (int bintotal) static void pmon_end_download (int final, int bintotal) { - char hexnumber[9]; /* includes '\0' space */ + char hexnumber[9]; /* Includes '\0' space. */ if (tftp_in_use) { @@ -3281,7 +3305,7 @@ pmon_end_download (int final, int bintotal) /* Wait for the stuff that PMON prints after the load has completed. The timeout value for use in the tftp case (15 seconds) was picked - arbitrarily but might be too small for really large downloads. FIXME. */ + arbitrarily but might be too small for really large downloads. FIXME. */ switch (mips_monitor) { case MON_LSI: @@ -3304,7 +3328,7 @@ pmon_end_download (int final, int bintotal) } if (tftp_in_use) - remove (tftp_localname); /* Remove temporary file */ + remove (tftp_localname); /* Remove temporary file. */ } /* Write the buffer specified by BUFFER of length LENGTH to either @@ -3357,33 +3381,34 @@ pmon_load_fast (char *file) mips_send_command ("set dlproto etxack\r", -1); mips_send_command ("set dlecho off\r", -1); /* NOTE: We get a "cannot set variable" message if the variable is - already defined to have the argument we give. The code doesn't - care, since it just scans to the next prompt anyway. */ + already defined to have the argument we give. The code doesn't + care, since it just scans to the next prompt anyway. */ /* Start the download: */ pmon_start_download (); - /* Zero the checksum */ + /* Zero the checksum. */ sprintf (buffer, "/Kxx\n"); reclen = strlen (buffer); pmon_download (buffer, reclen); finished = pmon_check_ack ("/Kxx"); for (s = abfd->sections; s && !finished; s = s->next) - if (s->flags & SEC_LOAD) /* only deal with loadable sections */ + if (s->flags & SEC_LOAD) /* Only deal with loadable sections. */ { bintotal += bfd_get_section_size (s); final = (s->vma + bfd_get_section_size (s)); - printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, (unsigned int) s->vma, + printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, + (unsigned int) s->vma, (unsigned int) (s->vma + bfd_get_section_size (s))); gdb_flush (gdb_stdout); - /* Output the starting address */ + /* Output the starting address. */ sprintf (buffer, "/A"); reclen = pmon_makeb64 (s->vma, &buffer[2], 36, &csum); buffer[2 + reclen] = '\n'; buffer[3 + reclen] = '\0'; - reclen += 3; /* for the initial escape code and carriage return */ + reclen += 3; /* For the initial escape code and carriage return. */ pmon_download (buffer, reclen); finished = pmon_check_ack ("/A"); @@ -3419,7 +3444,8 @@ pmon_load_fast (char *file) finished = pmon_check_ack ("data record"); if (finished) { - zerofill = 0; /* do not transmit pending zerofills */ + zerofill = 0; /* Do not transmit pending + zerofills. */ break; } @@ -3456,9 +3482,9 @@ pmon_load_fast (char *file) putchar_unfiltered ('\n'); } - /* Terminate the transfer. We know that we have an empty output - buffer at this point. */ - sprintf (buffer, "/E/E\n"); /* include dummy padding characters */ + /* Terminate the transfer. We know that we have an empty output + buffer at this point. */ + sprintf (buffer, "/E/E\n"); /* Include dummy padding characters. */ reclen = strlen (buffer); pmon_download (buffer, reclen); @@ -3474,7 +3500,7 @@ pmon_load_fast (char *file) return; } -/* mips_load -- download a file. */ +/* mips_load -- download a file. */ static void mips_load (char *file, int from_tty) @@ -3492,12 +3518,12 @@ mips_load (char *file, int from_tty) mips_initialize (); - /* Finally, make the PC point at the start address */ + /* Finally, make the PC point at the start address. */ regcache = get_current_regcache (); if (mips_monitor != MON_IDT) { /* Work around problem where PMON monitor updates the PC after a load - to a different value than GDB thinks it has. The following ensures + to a different value than GDB thinks it has. The following ensures that the regcache_write_pc() WILL update the PC value: */ regcache_invalidate (regcache, mips_regnum (get_regcache_arch (regcache))->pc); @@ -3552,7 +3578,8 @@ pmon_command (char *args, int from_tty) printf_filtered ("Received packet: %s\n", buf); } -extern initialize_file_ftype _initialize_remote_mips; /* -Wmissing-prototypes */ +/* -Wmissing-prototypes */ +extern initialize_file_ftype _initialize_remote_mips; /* Initialize mips_ops, lsi_ops, ddb_ops, pmon_ops, and rockhopper_ops. Create target specific commands and perform other initializations -- cgit v1.2.1