From 14cd51f7793a9ce07bc435069f57269450141363 Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Fri, 16 Apr 1999 01:35:26 +0000 Subject: Initial revision --- gdb/ser-unix.c | 808 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 808 insertions(+) create mode 100644 gdb/ser-unix.c (limited to 'gdb/ser-unix.c') diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c new file mode 100644 index 00000000000..f279c94cfdb --- /dev/null +++ b/gdb/ser-unix.c @@ -0,0 +1,808 @@ +/* Serial interface for local (hardwired) serial ports on Un*x like systems + Copyright 1992, 1993, 1994, 1998 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "defs.h" +#include "serial.h" +#include +#include +#include "terminal.h" +#ifdef HAVE_UNISTD_H +#include +#endif + +#ifdef HAVE_TERMIOS + +struct hardwire_ttystate +{ + struct termios termios; +}; +#endif /* termios */ + +#ifdef HAVE_TERMIO + +/* It is believed that all systems which have added job control to SVR3 + (e.g. sco) have also added termios. Even if not, trying to figure out + all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty + bewildering. So we don't attempt it. */ + +struct hardwire_ttystate +{ + struct termio termio; +}; +#endif /* termio */ + +#ifdef HAVE_SGTTY +/* Needed for the code which uses select(). We would include + too if it existed on all systems. */ +#include + +struct hardwire_ttystate +{ + struct sgttyb sgttyb; + struct tchars tc; + struct ltchars ltc; + /* Line discipline flags. */ + int lmode; +}; +#endif /* sgtty */ + +static int hardwire_open PARAMS ((serial_t scb, const char *name)); +static void hardwire_raw PARAMS ((serial_t scb)); +static int wait_for PARAMS ((serial_t scb, int timeout)); +static int hardwire_readchar PARAMS ((serial_t scb, int timeout)); +static int rate_to_code PARAMS ((int rate)); +static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate)); +static int hardwire_write PARAMS ((serial_t scb, const char *str, int len)); +static void hardwire_close PARAMS ((serial_t scb)); +static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state)); +static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state)); +static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb)); +static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); +static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate, + serial_ttystate)); +static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate)); +static int hardwire_drain_output PARAMS ((serial_t)); +static int hardwire_flush_output PARAMS ((serial_t)); +static int hardwire_flush_input PARAMS ((serial_t)); +static int hardwire_send_break PARAMS ((serial_t)); +static int hardwire_setstopbits PARAMS ((serial_t, int)); + +void _initialize_ser_hardwire PARAMS ((void)); + +#ifdef __CYGWIN32__ +extern void (*ui_loop_hook) PARAMS ((int)); +#endif + +/* Open up a real live device for serial I/O */ + +static int +hardwire_open(scb, name) + serial_t scb; + const char *name; +{ + scb->fd = open (name, O_RDWR); + if (scb->fd < 0) + return -1; + + return 0; +} + +static int +get_tty_state (scb, state) + serial_t scb; + struct hardwire_ttystate *state; +{ +#ifdef HAVE_TERMIOS + if (tcgetattr(scb->fd, &state->termios) < 0) + return -1; + + return 0; +#endif + +#ifdef HAVE_TERMIO + if (ioctl (scb->fd, TCGETA, &state->termio) < 0) + return -1; + return 0; +#endif + +#ifdef HAVE_SGTTY + if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0) + return -1; + if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0) + return -1; + if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0) + return -1; + if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0) + return -1; + + return 0; +#endif +} + +static int +set_tty_state(scb, state) + serial_t scb; + struct hardwire_ttystate *state; +{ +#ifdef HAVE_TERMIOS + if (tcsetattr(scb->fd, TCSANOW, &state->termios) < 0) + return -1; + + return 0; +#endif + +#ifdef HAVE_TERMIO + if (ioctl (scb->fd, TCSETA, &state->termio) < 0) + return -1; + return 0; +#endif + +#ifdef HAVE_SGTTY + if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0) + return -1; + if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0) + return -1; + if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0) + return -1; + if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0) + return -1; + + return 0; +#endif +} + +static serial_ttystate +hardwire_get_tty_state(scb) + serial_t scb; +{ + struct hardwire_ttystate *state; + + state = (struct hardwire_ttystate *)xmalloc(sizeof *state); + + if (get_tty_state(scb, state)) + return NULL; + + return (serial_ttystate)state; +} + +static int +hardwire_set_tty_state(scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + struct hardwire_ttystate *state; + + state = (struct hardwire_ttystate *)ttystate; + + return set_tty_state(scb, state); +} + +static int +hardwire_noflush_set_tty_state (scb, new_ttystate, old_ttystate) + serial_t scb; + serial_ttystate new_ttystate; + serial_ttystate old_ttystate; +{ + struct hardwire_ttystate new_state; +#ifdef HAVE_SGTTY + struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate; +#endif + + new_state = *(struct hardwire_ttystate *)new_ttystate; + + /* Don't change in or out of raw mode; we don't want to flush input. + termio and termios have no such restriction; for them flushing input + is separate from setting the attributes. */ + +#ifdef HAVE_SGTTY + if (state->sgttyb.sg_flags & RAW) + new_state.sgttyb.sg_flags |= RAW; + else + new_state.sgttyb.sg_flags &= ~RAW; + + /* I'm not sure whether this is necessary; the manpage just mentions + RAW not CBREAK. */ + if (state->sgttyb.sg_flags & CBREAK) + new_state.sgttyb.sg_flags |= CBREAK; + else + new_state.sgttyb.sg_flags &= ~CBREAK; +#endif + + return set_tty_state (scb, &new_state); +} + +static void +hardwire_print_tty_state (scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate; + int i; + +#ifdef HAVE_TERMIOS + printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n", + state->termios.c_iflag, state->termios.c_oflag); + printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x\n", + state->termios.c_cflag, state->termios.c_lflag); +#if 0 + /* This not in POSIX, and is not really documented by those systems + which have it (at least not Sun). */ + printf_filtered ("c_line = 0x%x.\n", state->termios.c_line); +#endif + printf_filtered ("c_cc: "); + for (i = 0; i < NCCS; i += 1) + printf_filtered ("0x%x ", state->termios.c_cc[i]); + printf_filtered ("\n"); +#endif + +#ifdef HAVE_TERMIO + printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n", + state->termio.c_iflag, state->termio.c_oflag); + printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n", + state->termio.c_cflag, state->termio.c_lflag, + state->termio.c_line); + printf_filtered ("c_cc: "); + for (i = 0; i < NCC; i += 1) + printf_filtered ("0x%x ", state->termio.c_cc[i]); + printf_filtered ("\n"); +#endif + +#ifdef HAVE_SGTTY + printf_filtered ("sgttyb.sg_flags = 0x%x.\n", state->sgttyb.sg_flags); + + printf_filtered ("tchars: "); + for (i = 0; i < (int)sizeof (struct tchars); i++) + printf_filtered ("0x%x ", ((unsigned char *)&state->tc)[i]); + printf_filtered ("\n"); + + printf_filtered ("ltchars: "); + for (i = 0; i < (int)sizeof (struct ltchars); i++) + printf_filtered ("0x%x ", ((unsigned char *)&state->ltc)[i]); + printf_filtered ("\n"); + + printf_filtered ("lmode: 0x%x\n", state->lmode); +#endif +} + +/* Wait for the output to drain away, as opposed to flushing (discarding) it */ + +static int +hardwire_drain_output (scb) + serial_t scb; +{ +#ifdef HAVE_TERMIOS + return tcdrain (scb->fd); +#endif + +#ifdef HAVE_TERMIO + return ioctl (scb->fd, TCSBRK, 1); +#endif + +#ifdef HAVE_SGTTY + /* Get the current state and then restore it using TIOCSETP, + which should cause the output to drain and pending input + to be discarded. */ + { + struct hardwire_ttystate state; + if (get_tty_state (scb, &state)) + { + return (-1); + } + else + { + return (ioctl (scb->fd, TIOCSETP, &state.sgttyb)); + } + } +#endif +} + +static int +hardwire_flush_output (scb) + serial_t scb; +{ +#ifdef HAVE_TERMIOS + return tcflush (scb->fd, TCOFLUSH); +#endif + +#ifdef HAVE_TERMIO + return ioctl (scb->fd, TCFLSH, 1); +#endif + +#ifdef HAVE_SGTTY + /* This flushes both input and output, but we can't do better. */ + return ioctl (scb->fd, TIOCFLUSH, 0); +#endif +} + +static int +hardwire_flush_input (scb) + serial_t scb; +{ + scb->bufcnt = 0; + scb->bufp = scb->buf; + +#ifdef HAVE_TERMIOS + return tcflush (scb->fd, TCIFLUSH); +#endif + +#ifdef HAVE_TERMIO + return ioctl (scb->fd, TCFLSH, 0); +#endif + +#ifdef HAVE_SGTTY + /* This flushes both input and output, but we can't do better. */ + return ioctl (scb->fd, TIOCFLUSH, 0); +#endif +} + +static int +hardwire_send_break (scb) + serial_t scb; +{ +#ifdef HAVE_TERMIOS + return tcsendbreak (scb->fd, 0); +#endif + +#ifdef HAVE_TERMIO + return ioctl (scb->fd, TCSBRK, 0); +#endif + +#ifdef HAVE_SGTTY + { + int status; + struct timeval timeout; + + status = ioctl (scb->fd, TIOCSBRK, 0); + + /* Can't use usleep; it doesn't exist in BSD 4.2. */ + /* Note that if this select() is interrupted by a signal it will not wait + the full length of time. I think that is OK. */ + timeout.tv_sec = 0; + timeout.tv_usec = 250000; + select (0, 0, 0, 0, &timeout); + status = ioctl (scb->fd, TIOCCBRK, 0); + return status; + } +#endif +} + +static void +hardwire_raw(scb) + serial_t scb; +{ + struct hardwire_ttystate state; + + if (get_tty_state(scb, &state)) + fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno)); + +#ifdef HAVE_TERMIOS + state.termios.c_iflag = 0; + state.termios.c_oflag = 0; + state.termios.c_lflag = 0; + state.termios.c_cflag &= ~(CSIZE|PARENB); + state.termios.c_cflag |= CLOCAL | CS8; + state.termios.c_cc[VMIN] = 0; + state.termios.c_cc[VTIME] = 0; +#endif + +#ifdef HAVE_TERMIO + state.termio.c_iflag = 0; + state.termio.c_oflag = 0; + state.termio.c_lflag = 0; + state.termio.c_cflag &= ~(CSIZE|PARENB); + state.termio.c_cflag |= CLOCAL | CS8; + state.termio.c_cc[VMIN] = 0; + state.termio.c_cc[VTIME] = 0; +#endif + +#ifdef HAVE_SGTTY + state.sgttyb.sg_flags |= RAW | ANYP; + state.sgttyb.sg_flags &= ~(CBREAK | ECHO); +#endif + + scb->current_timeout = 0; + + if (set_tty_state (scb, &state)) + fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno)); +} + +/* Wait for input on scb, with timeout seconds. Returns 0 on success, + otherwise SERIAL_TIMEOUT or SERIAL_ERROR. + + For termio{s}, we actually just setup VTIME if necessary, and let the + timeout occur in the read() in hardwire_read(). + */ + +static int +wait_for(scb, timeout) + serial_t scb; + int timeout; +{ +#ifndef __CYGWIN32__ + scb->timeout_remaining = 0; +#endif + +#ifdef HAVE_SGTTY + { + struct timeval tv; + fd_set readfds; + + FD_ZERO (&readfds); + + tv.tv_sec = timeout; + tv.tv_usec = 0; + + FD_SET(scb->fd, &readfds); + + while (1) + { + int numfds; + + if (timeout >= 0) + numfds = select(scb->fd+1, &readfds, 0, 0, &tv); + else + numfds = select(scb->fd+1, &readfds, 0, 0, 0); + + if (numfds <= 0) + if (numfds == 0) + return SERIAL_TIMEOUT; + else if (errno == EINTR) + continue; + else + return SERIAL_ERROR; /* Got an error from select or poll */ + + return 0; + } + } +#endif /* HAVE_SGTTY */ + +#if defined HAVE_TERMIO || defined HAVE_TERMIOS + if (timeout == scb->current_timeout) + return 0; + + scb->current_timeout = timeout; + + { + struct hardwire_ttystate state; + + if (get_tty_state(scb, &state)) + fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno)); + +#ifdef HAVE_TERMIOS + if (timeout < 0) + { + /* No timeout. */ + state.termios.c_cc[VTIME] = 0; + state.termios.c_cc[VMIN] = 1; + } + else + { + state.termios.c_cc[VMIN] = 0; + state.termios.c_cc[VTIME] = timeout * 10; + if (state.termios.c_cc[VTIME] != timeout * 10) + { + + /* If c_cc is an 8-bit signed character, we can't go + bigger than this. If it is always unsigned, we could use + 25. */ + + scb->current_timeout = 12; + state.termios.c_cc[VTIME] = scb->current_timeout * 10; + scb->timeout_remaining = timeout - scb->current_timeout; + } + } +#endif + +#ifdef HAVE_TERMIO + if (timeout < 0) + { + /* No timeout. */ + state.termio.c_cc[VTIME] = 0; + state.termio.c_cc[VMIN] = 1; + } + else + { + state.termio.c_cc[VMIN] = 0; + state.termio.c_cc[VTIME] = timeout * 10; + if (state.termio.c_cc[VTIME] != timeout * 10) + { + /* If c_cc is an 8-bit signed character, we can't go + bigger than this. If it is always unsigned, we could use + 25. */ + + scb->current_timeout = 12; + state.termio.c_cc[VTIME] = scb->current_timeout * 10; + scb->timeout_remaining = timeout - scb->current_timeout; + } + } +#endif + + if (set_tty_state (scb, &state)) + fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno)); + + return 0; + } +#endif /* HAVE_TERMIO || HAVE_TERMIOS */ +} + +/* Read a character with user-specified timeout. TIMEOUT is number of seconds + to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns + char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line + dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */ +static int +hardwire_readchar (scb, timeout) + serial_t scb; + int timeout; +{ + int status; +#ifdef __CYGWIN32__ + int t; +#endif + + if (scb->bufcnt-- > 0) + return *scb->bufp++; + +#ifdef __CYGWIN32__ + if (timeout > 0) + timeout++; +#endif + + while (1) + { +#ifdef __CYGWIN32__ + t = timeout == 0 ? 0 : 1; + scb->timeout_remaining = timeout < 0 ? timeout : timeout - t; + status = wait_for (scb, t); + + /* -2 means disable timer */ + if (ui_loop_hook) + ui_loop_hook (-2); +#else + status = wait_for (scb, timeout); +#endif + if (status < 0) + return status; + + scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ); + + if (scb->bufcnt <= 0) + { + if (scb->bufcnt == 0) + { + /* Zero characters means timeout (it could also be EOF, but + we don't (yet at least) distinguish). */ + if (scb->timeout_remaining > 0) + { + timeout = scb->timeout_remaining; + continue; + } +#ifdef __CYGWIN32__ + else if (scb->timeout_remaining < 0) + continue; +#endif + else + return SERIAL_TIMEOUT; + } + else if (errno == EINTR) + continue; + else + return SERIAL_ERROR; /* Got an error from read */ + } + + scb->bufcnt--; + scb->bufp = scb->buf; + return *scb->bufp++; + } +} + +#ifndef B19200 +#define B19200 EXTA +#endif + +#ifndef B38400 +#define B38400 EXTB +#endif + +/* Translate baud rates from integers to damn B_codes. Unix should + have outgrown this crap years ago, but even POSIX wouldn't buck it. */ + +static struct +{ + int rate; + int code; +} +baudtab[] = +{ + {50, B50}, + {75, B75}, + {110, B110}, + {134, B134}, + {150, B150}, + {200, B200}, + {300, B300}, + {600, B600}, + {1200, B1200}, + {1800, B1800}, + {2400, B2400}, + {4800, B4800}, + {9600, B9600}, + {19200, B19200}, + {38400, B38400}, +#ifdef B57600 + {57600, B57600}, +#endif +#ifdef B115200 + {115200, B115200}, +#endif +#ifdef B230400 + {230400, B230400}, +#endif +#ifdef B460800 + {460800, B460800}, +#endif + {-1, -1}, +}; + +static int +rate_to_code(rate) + int rate; +{ + int i; + + for (i = 0; baudtab[i].rate != -1; i++) + if (rate == baudtab[i].rate) + return baudtab[i].code; + + return -1; +} + +static int +hardwire_setbaudrate(scb, rate) + serial_t scb; + int rate; +{ + struct hardwire_ttystate state; + + if (get_tty_state(scb, &state)) + return -1; + +#ifdef HAVE_TERMIOS + cfsetospeed (&state.termios, rate_to_code (rate)); + cfsetispeed (&state.termios, rate_to_code (rate)); +#endif + +#ifdef HAVE_TERMIO +#ifndef CIBAUD +#define CIBAUD CBAUD +#endif + + state.termio.c_cflag &= ~(CBAUD | CIBAUD); + state.termio.c_cflag |= rate_to_code (rate); +#endif + +#ifdef HAVE_SGTTY + state.sgttyb.sg_ispeed = rate_to_code (rate); + state.sgttyb.sg_ospeed = rate_to_code (rate); +#endif + + return set_tty_state (scb, &state); +} + +static int +hardwire_setstopbits(scb, num) + serial_t scb; + int num; +{ + struct hardwire_ttystate state; + int newbit; + + if (get_tty_state(scb, &state)) + return -1; + + switch (num) + { + case SERIAL_1_STOPBITS: + newbit = 0; + break; + case SERIAL_1_AND_A_HALF_STOPBITS: + case SERIAL_2_STOPBITS: + newbit = 1; + break; + default: + return 1; + } + +#ifdef HAVE_TERMIOS + if (!newbit) + state.termios.c_cflag &= ~CSTOPB; + else + state.termios.c_cflag |= CSTOPB; /* two bits */ +#endif + +#ifdef HAVE_TERMIO + if (!newbit) + state.termio.c_cflag &= ~CSTOPB; + else + state.termio.c_cflag |= CSTOPB; /* two bits */ +#endif + +#ifdef HAVE_SGTTY + return 0; /* sgtty doesn't support this */ +#endif + + return set_tty_state (scb, &state); +} + +static int +hardwire_write(scb, str, len) + serial_t scb; + const char *str; + int len; +{ + int cc; + + while (len > 0) + { + cc = write(scb->fd, str, len); + + if (cc < 0) + return 1; + len -= cc; + str += cc; + } + return 0; +} + +static void +hardwire_close(scb) + serial_t scb; +{ + if (scb->fd < 0) + return; + + close(scb->fd); + scb->fd = -1; +} + +static struct serial_ops hardwire_ops = +{ + "hardwire", + 0, + hardwire_open, + hardwire_close, + hardwire_readchar, + hardwire_write, + hardwire_flush_output, + hardwire_flush_input, + hardwire_send_break, + hardwire_raw, + hardwire_get_tty_state, + hardwire_set_tty_state, + hardwire_print_tty_state, + hardwire_noflush_set_tty_state, + hardwire_setbaudrate, + hardwire_setstopbits, + hardwire_drain_output, /* wait for output to drain */ +}; + +void +_initialize_ser_hardwire () +{ + serial_add_interface (&hardwire_ops); +} -- cgit v1.2.1