From 3f58899ae80421eb6d2ed3d0d2329986f6e77c66 Mon Sep 17 00:00:00 2001 From: Jason Molenda Date: Wed, 22 Sep 1999 03:28:34 +0000 Subject: import gdb-1999-09-21 --- gdb/serial.h | 266 ++++++++++++++++++++++++++++++++++------------------------- 1 file changed, 155 insertions(+), 111 deletions(-) (limited to 'gdb/serial.h') diff --git a/gdb/serial.h b/gdb/serial.h index 09916fe8387..e3a1bf271f3 100644 --- a/gdb/serial.h +++ b/gdb/serial.h @@ -1,5 +1,5 @@ /* Remote serial support interface definitions for GDB, the GNU Debugger. - Copyright 1992, 1993 Free Software Foundation, Inc. + Copyright 1992, 1993, 1999 Free Software Foundation, Inc. This file is part of GDB. @@ -21,175 +21,219 @@ #ifndef SERIAL_H #define SERIAL_H -/* Terminal state pointer. This is specific to each type of interface. */ - -typedef PTR serial_ttystate; +/* For most routines, if a failure is indicated, then errno should be + examined. */ -struct _serial_t - { - int fd; /* File descriptor */ - struct serial_ops *ops; /* Function vector */ - void *state; /* Local context info for open FD */ - serial_ttystate ttystate; /* Not used (yet) */ - int bufcnt; /* Amount of data in receive buffer */ - unsigned char *bufp; /* Current byte */ - unsigned char buf[BUFSIZ]; /* Da buffer itself */ - int current_timeout; /* (termio{s} only), last value of VTIME */ - /* ser-unix.c termio{,s} only, we still need to wait for this many more - seconds. */ - int timeout_remaining; - char *name; /* The name of the device or host */ - struct _serial_t *next; /* Pointer to the next serial_t */ - int refcnt; /* Number of pointers to this block */ - }; +/* Terminal state pointer. This is specific to each type of + interface. */ +typedef void *serial_ttystate; +struct _serial_t; typedef struct _serial_t *serial_t; -struct serial_ops - { - char *name; - struct serial_ops *next; - int (*open) PARAMS ((serial_t, const char *name)); - void (*close) PARAMS ((serial_t)); - int (*readchar) PARAMS ((serial_t, int timeout)); - int (*write) PARAMS ((serial_t, const char *str, int len)); - /* Discard pending output */ - int (*flush_output) PARAMS ((serial_t)); - /* Discard pending input */ - int (*flush_input) PARAMS ((serial_t)); - int (*send_break) PARAMS ((serial_t)); - void (*go_raw) PARAMS ((serial_t)); - serial_ttystate (*get_tty_state) PARAMS ((serial_t)); - int (*set_tty_state) PARAMS ((serial_t, serial_ttystate)); - void (*print_tty_state) PARAMS ((serial_t, serial_ttystate)); - int (*noflush_set_tty_state) - PARAMS ((serial_t, serial_ttystate, serial_ttystate)); - int (*setbaudrate) PARAMS ((serial_t, int rate)); - int (*setstopbits) PARAMS ((serial_t, int num)); - /* Wait for output to drain */ - int (*drain_output) PARAMS ((serial_t)); - }; +/* Try to open NAME. Returns a new serial_t on success, NULL on + failure. */ -/* Add a new serial interface to the interface list */ +extern serial_t serial_open (const char *name); +#define SERIAL_OPEN(NAME) serial_open(NAME) -void serial_add_interface PARAMS ((struct serial_ops * optable)); +/* Open a new serial stream using a file handle. */ -serial_t serial_open PARAMS ((const char *name)); +extern serial_t serial_fdopen (const int fd); +#define SERIAL_FDOPEN(FD) serial_fdopen(FD) -serial_t serial_fdopen PARAMS ((const int fd)); +/* Push out all buffers, close the device and destroy SERIAL_T. */ -/* For most routines, if a failure is indicated, then errno should be - examined. */ +extern void serial_close (serial_t); +#define SERIAL_CLOSE(SERIAL_T) serial_close ((SERIAL_T)) -/* Try to open NAME. Returns a new serial_t on success, NULL on failure. - */ +/* Push out all buffers and destroy SERIAL_T without closing the + device. */ -#define SERIAL_OPEN(NAME) serial_open(NAME) +extern void serial_un_fdopen (serial_t scb); +#define SERIAL_UN_FDOPEN(SERIAL_T) serial_un_fdopen ((SERIAL_T)) -/* Open a new serial stream using a file handle. */ +/* Read one char from the serial device with TIMEOUT seconds to wait + or -1 to wait forever. Use timeout of 0 to effect a poll. Returns + char if ok, else one of the following codes. Note that all error + codes are guaranteed to be < 0. */ -#define SERIAL_FDOPEN(FD) serial_fdopen(FD) +#define SERIAL_ERROR -1 /* General error, see errno for details */ +#define SERIAL_TIMEOUT -2 +#define SERIAL_EOF -3 + +extern int serial_readchar (serial_t scb, int timeout); +#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar ((SERIAL_T), (TIMEOUT)) + +/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for + success, non-zero for failure. */ + +extern int serial_write (serial_t scb, const char *str, int len); +#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN) + +/* Write a printf style string onto the serial port. */ + +extern void serial_printf (serial_t desc, const char *,...) ATTR_FORMAT (printf, 2, 3); /* Allow pending output to drain. */ -#define SERIAL_DRAIN_OUTPUT(SERIAL_T) \ - ((SERIAL_T)->ops->drain_output((SERIAL_T))) +extern int serial_drain_output (serial_t); +#define SERIAL_DRAIN_OUTPUT(SERIAL_T) serial_drain_output ((SERIAL_T)) -/* Flush (discard) pending output. Might also flush input (if this system can't flush - only output). */ +/* Flush (discard) pending output. Might also flush input (if this + system can't flush only output). */ -#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \ - ((SERIAL_T)->ops->flush_output((SERIAL_T))) +extern int serial_flush_output (serial_t); +#define SERIAL_FLUSH_OUTPUT(SERIAL_T) serial_flush_output ((SERIAL_T)) -/* Flush pending input. Might also flush output (if this system can't flush - only input). */ +/* Flush pending input. Might also flush output (if this system can't + flush only input). */ -#define SERIAL_FLUSH_INPUT(SERIAL_T)\ - ((*(SERIAL_T)->ops->flush_input) ((SERIAL_T))) +extern int serial_flush_input (serial_t); +#define SERIAL_FLUSH_INPUT(SERIAL_T) serial_flush_input ((SERIAL_T)) /* Send a break between 0.25 and 0.5 seconds long. */ -extern int serial_send_break PARAMS ((serial_t scb)); - +extern int serial_send_break (serial_t scb); #define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T) /* Turn the port into raw mode. */ -#define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T)) +extern void serial_raw (serial_t scb); +#define SERIAL_RAW(SERIAL_T) serial_raw ((SERIAL_T)) /* Return a pointer to a newly malloc'd ttystate containing the state of the tty. */ -#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T)) + +extern serial_ttystate serial_get_tty_state (serial_t scb); +#define SERIAL_GET_TTY_STATE(SERIAL_T) serial_get_tty_state ((SERIAL_T)) /* Set the state of the tty to TTYSTATE. The change is immediate. When changing to or from raw mode, input might be discarded. - Returns 0 for success, negative value for error (in which case errno - contains the error). */ -#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE)) + Returns 0 for success, negative value for error (in which case + errno contains the error). */ + +extern int serial_set_tty_state (serial_t scb, serial_ttystate ttystate); +#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) serial_set_tty_state ((SERIAL_T), (TTYSTATE)) -/* printf_filtered a user-comprehensible description of ttystate. */ -#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \ - ((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE))) +/* printf_filtered a user-comprehensible description of ttystate on + the specified STREAM. FIXME: At present this sends output to the + default stream - GDB_STDOUT. */ + +extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, struct gdb_file *); +#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE, STREAM) serial_print_tty_state ((SERIAL_T), (TTYSTATE), (STREAM)) /* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the current state (generally obtained from a recent call to SERIAL_GET_TTY_STATE), but be careful not to discard any input. - This means that we never switch in or out of raw mode, even - if NEW_TTYSTATE specifies a switch. */ + This means that we never switch in or out of raw mode, even if + NEW_TTYSTATE specifies a switch. */ + +extern int serial_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate); #define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \ - ((*((SERIAL_T)->ops->noflush_set_tty_state)) \ - ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE))) +serial_noflush_set_tty_state ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)) -/* Read one char from the serial device with TIMEOUT seconds to wait - or -1 to wait forever. Use timeout of 0 to effect a poll. Returns - char if ok, else one of the following codes. Note that all error - codes are guaranteed to be < 0. */ +/* Set the baudrate to the decimal value supplied. Returns 0 for + success, -1 for failure. */ -#define SERIAL_ERROR -1 /* General error, see errno for details */ -#define SERIAL_TIMEOUT -2 -#define SERIAL_EOF -3 +extern int serial_setbaudrate (serial_t scb, int rate); +#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) serial_setbaudrate ((SERIAL_T), (RATE)) -extern int serial_readchar PARAMS ((serial_t scb, int timeout)); +/* Set the number of stop bits to the value specified. Returns 0 for + success, -1 for failure. */ -#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar (SERIAL_T, TIMEOUT) +#define SERIAL_1_STOPBITS 1 +#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */ +#define SERIAL_2_STOPBITS 3 -/* Set the baudrate to the decimal value supplied. Returns 0 for success, - -1 for failure. */ +extern int serial_setstopbits (serial_t scb, int num); +#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) serial_setstopbits ((SERIAL_T), (NUM)) -#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE)) +/* Asynchronous serial interface: */ -/* Set the number of stop bits to the value specified. Returns 0 for success, - -1 for failure. */ +/* Can the serial device support asynchronous mode? */ -#define SERIAL_1_STOPBITS 1 -#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */ -#define SERIAL_2_STOPBITS 3 +extern int serial_can_async_p (serial_t scb); +#define SERIAL_CAN_ASYNC_P(SERIAL_T) serial_can_async_p ((SERIAL_T)) -#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) ((SERIAL_T)->ops->setstopbits((SERIAL_T), NUM)) +/* Has the serial device been put in asynchronous mode? */ -/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for - success, non-zero for failure. */ +extern int serial_is_async_p (serial_t scb); +#define SERIAL_IS_ASYNC_P(SERIAL_T) serial_is_async_p ((SERIAL_T)) -extern int serial_write PARAMS ((serial_t scb, const char *str, int len)); +/* For ASYNC enabled devices, register a callback and enable + asynchronous mode. To disable asynchronous mode, register a NULL + callback. */ -#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN) +typedef void (serial_event_ftype) (int error, void *context, int fd); +extern void serial_async (serial_t scb, serial_event_ftype *handler, void *context); +#define SERIAL_ASYNC(SERIAL_T, HANDLER, CONTEXT) serial_async ((SERIAL_T), (HANDLER), (CONTEXT)) -/* Push out all buffers, close the device and destroy SERIAL_T. */ +/* Provide direct access to the underlying FD (if any) used to + implement the serial device. This interface is clearly + deprecated. Will call internal_error() if the operation isn't + applicable to the current serial device. */ -extern void serial_close PARAMS ((serial_t, int)); +extern int deprecated_serial_fd (serial_t scb); +#define DEPRECATED_SERIAL_FD(SERIAL_T) deprecated_serial_fd ((SERIAL_T)) -#define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T, 1) -/* Push out all buffers and destroy SERIAL_T without closing the device. */ +/* Details of an instance of a serial object */ -#define SERIAL_UN_FDOPEN(SERIAL_T) serial_close(SERIAL_T, 0) +struct _serial_t + { + int fd; /* File descriptor */ + struct serial_ops *ops; /* Function vector */ + void *state; /* Local context info for open FD */ + serial_ttystate ttystate; /* Not used (yet) */ + int bufcnt; /* Amount of data in receive buffer */ + unsigned char *bufp; /* Current byte */ + unsigned char buf[BUFSIZ]; /* Da buffer itself */ + int current_timeout; /* (termio{s} only), last value of VTIME */ + /* ser-unix.c termio{,s} only, we still need to wait for this many more + seconds. */ + int timeout_remaining; + char *name; /* The name of the device or host */ + struct _serial_t *next; /* Pointer to the next serial_t */ + int refcnt; /* Number of pointers to this block */ + void *async_context; /* Async event thread's context */ + serial_event_ftype *async_handler;/* Async event handler */ + }; + +struct serial_ops + { + char *name; + struct serial_ops *next; + int (*open) (serial_t, const char *name); + void (*close) (serial_t); + int (*readchar) (serial_t, int timeout); + int (*write) (serial_t, const char *str, int len); + /* Discard pending output */ + int (*flush_output) (serial_t); + /* Discard pending input */ + int (*flush_input) (serial_t); + int (*send_break) (serial_t); + void (*go_raw) (serial_t); + serial_ttystate (*get_tty_state) (serial_t); + int (*set_tty_state) (serial_t, serial_ttystate); + void (*print_tty_state) (serial_t, serial_ttystate, struct gdb_file *); + int (*noflush_set_tty_state) (serial_t, serial_ttystate, serial_ttystate); + int (*setbaudrate) (serial_t, int rate); + int (*setstopbits) (serial_t, int num); + /* Wait for output to drain */ + int (*drain_output) (serial_t); + /* Change the serial device into/out of asynchronous mode, call + the specified function when ever there is something + interesting. */ + void (*async) (serial_t scb, int async_p); + }; + +/* Add a new serial interface to the interface list */ -extern void serial_printf -PARAMS ((serial_t desc, const char *,...)) -ATTR_FORMAT (printf, 2, 3); +extern void serial_add_interface (struct serial_ops * optable); /* File in which to record the remote debugging session */ - extern void serial_log_command PARAMS ((const char *)); +extern void serial_log_command (const char *); #endif /* SERIAL_H */ -- cgit v1.2.1